ET-PKL100S. Installation Instructions. Ceiling Mount Bracket (for Low Ceilings) Model No.

Size: px
Start display at page:

Download "ET-PKL100S. Installation Instructions. Ceiling Mount Bracket (for Low Ceilings) Model No."

Transcription

1 Installation Instructions Ceiling Mount Bracket (for Low Ceilings) Model No. ET-PKL100S Thank you for purchasing this Panasonic Product. JJ To customers The Installation Instructions is intended for use by installation personnel. Be sure to employ certified personnel to perform the installation. After installation, have the installation personnel return these Installation Instructions to you, and save it for future use. When moving or removing the projector, give this Installation Instructions to the installation personnel and have them perform the procedure. JJ To installation personnel Carefully read the Installation Instructions and install this product correctly and safely. Be sure to read through the section entitled Read this first! (page 3) before proceeding with the installation. After installation, return these Installation Instructions to the customer. ENGLISH TQZJ604-1

2 Contents Read this first!... 3 Product description... 4 Installation... 5 Setting up the screen... 5 Screws tightening torques... 5 Mounting the attachment plate to the ceiling... 5 Installing the brackets to the projector... 7 Suspending the projector... 8 Adjusting the installation angle... 9 Installation of ceiling mount bracket drop-prevention kit Specifications ENGLISH

3 Read this first! Always follow these precautions WARNING: Installation work should only be carried out by the certified personnel. zif this product is not installed correctly, serious accidents may result. zfollow the instructions specified in Installation and Installation of ceiling mount bracket drop-prevention kit of this manual, and perform secure installation. Install the ceiling mount bracket in accordance with the structure and materials of the installation location. zif a mistake is made in the installation procedure, the ceiling mount bracket may fall down and an injury may result. Mounting and installation must be carried out by two or more persons. zwhen installing the projector in an overhead location, for example, in a high ceiling, at least two persons will be required to handle the installation. Make sure that your footing is safe and secure during installation. zif your footing is not secure, you may fall down or drop the unit, and an injury may result. Do not loosen or remove the unit screws and bolts unnecessarily. zthe projector may fall down and an injury may result. Do not install in a location that is not strong enough. zif the installation location is not strong enough, the unit may fall down and damage to the projector or an injury may result. Do not install the ceiling mount bracket in humid or dusty locations or in locations where the ceiling mount bracket may come into contact with oily smoke or steam. zusing the projector under such conditions may result in fire or electric shock. Also, the oil will cause the plastic to deteriorate and the projector may fall down when installed on a ceiling. Do not allow children to reach the supplied screws and metal fittings. zthe supplied screws and metal fittings can cause personal injury if swallowed. zif swallowed, seek medical advice immediately. Do not disassemble or modify the ceiling mount bracket. zthe projector may be damaged or fall, causing injury. CAUTION: Only install a designated projector. Only install using a designated method. zthe projector may fall down and be damaged, and an injury may result. Do not install the unit in a location that may impede projector ventilation. za fire may result. Do not hang from or hang objects on the projector or ceiling mount bracket. zthe projector may fall and cause injury. When installing, always use the supplied components. zthe unit may be damaged, or the projector may fall down and an injury may result. Install the mounting screws and power cable in such a way that they will not make contact with metal objects inside the ceiling. zelectric shocks may result from contact with any metal objects inside the ceiling. rrpanasonic takes no responsibility for any accident or damage caused by the installation of the ceiling mount bracket using methods that are not described or methods that do not use the parts specified in these Installation Instructions. r r If products are no longer being used, they should be dismantled and removed by certified personnel as soon as possible. ENGLISH - 3

4 Product description This is a ceiling mount bracket for installing projectors. Applicable ceiling mount brackets ET-PKL420B / ET-PKL430B Structural components Parts name Form (number of parts) Applications Attachment plate 1 The attachment plate is attached to the ceiling via four ceiling mount bolts. Installation methods are different for concrete and wooden ceilings. It also allows horizontal swing angle adjustment. Adjustable bracket unit 1 This is used to connect the attachment plate with the projector mount bracket. It has a function which allows adjustment of the forward and back tilt. Bolts Hex head bolt, captive washer (M6 12) 4 These are used to secure the adjustable bracket unit to the projector mount bracket. The M6 indications in the installation instructions refer to captive washer hex head bolts. The user must also obtain the following parts. (sold separately) Installation work Required parts page Installing the attachment plate to the ceiling Installing to a wooden structure Installing to a concrete structure Ceiling mount bolt ( 4), Hex nut ( 16), Flat washer ( 16) Spring washer ( 8) Ceiling mount bolt ( 4), Hex nut ( 12), Flat washer ( 12), Spring washer ( 8), Anchoring nut or curled plug ( 4) 6 6 Installation of ceiling mount bracket drop-prevention kit Installing to a wooden structure Installing to a concrete structure Ceiling mount bolt ( 1), Hex nut ( 2), Flat washer ( 1), Spring washer ( 1) Anchoring nut or curled plug (x1), Spring washer (x1), Hex head bolt (x1) Be sure to use M8 or 5 / 16 " suspension bolts, nuts, flat washers, spring washers and anchor nuts zstore small parts in an appropriate manner, and keep them away from young children. Screw z tightening torques: M4: 1.25 ± 0.2 N m, M6: 4 ± 0.5 N m, M8 or 5 / 16 ": 10 ± 1 N m. Use z a torque screwdriver or torque wrench when tightening the bolts and nuts. Do not use electric screwdrivers or impact screwdrivers. zdispose of the packaging materials properly after taking the product out of it. 4 - ENGLISH

5 Installation After checking the height, width and structure of the installation location, determine the appropriate positions for setting up the screen and installing the projector. Setting up the screen Set up the screen according to the specified method in a position which takes into account the projection distance and angle and the type of screen being used. Screws tightening torques M ± 0.2 N m M6 4 ± 0.5 N m M8 or 5 / 16 " 10 ± 1 N m When z tightening the screws, use a torque screwdriver or a hex torque wrench to tighten the screws to the specified tightening torques. Do not use electric screwdrivers or impact screwdrivers. Mounting the attachment plate to the ceiling After checking the height, width, and structure of the installation location, determine the appropriate positions for setting up the screen and installing the projector. Determine the location of the attachment plate in the ceiling to align the lens with the center of the screen. Attachment plate mounting hole sizes and preparation Make mounting holes while referring to the following diagrams. <Attachment plate diagram> (Dimensions from below) ( 7 /16'') <Bolt mounting hole size> 66(2-19 /32'') Four holes drilled to fit M8 bolts To the screen 160(6-5 /16'') 142(5-19 /32'') 116(4-9 /16'') 108.8(4-9 /32'') 25 ( 31 /32'') 46 (1-13 /16'') 142(5-19 /32'') 71(2-25 /32'') 25 ( 31 /32'') 46 (1-13 /16'') Unit: mm (") 98.8(3-7 /8'') 106(4-3 /16'') 132(5-3 /16'') 150(5-29 /32'') Unit: mm (") 132(5-3 /16'') Install the attachment plate so that the arrow points toward the screen. If z installing to a concrete structure, the sizes of the bolt mounting holes should match the sizes of the anchoring nuts or curled plugs used. Please z purchase M8 or 5 / 16 " bolt for the commercially available ceiling mount bolt, hex nut, flat washer, spring washer, anchoring nut or curled plug. ENGLISH - 5

6 Installation (continued) Installing the attachment plate Depending on whether it is installed on a concrete or wooden ceiling structure, there are two different installation methods. Carry out by the appropriate installation method which is suited to each ceiling. zinstalling to a wooden structure To the screen Ceiling surface Attachment plate Hex nut Hex nut Spring washer Ceiling mount bolt stay (beam side) Flat washer Hex nut Ceiling mount bolt (M8 or 5 / 16 ") Spring washer Flat washer Approx. 5 mm(3/16") Bracket fixing screw 1 Make holes in the ceiling surface for inserting the ceiling mount bolts. The z sizes of the holes in the ceiling should match the sizes of the mounting holes in the attachment plate. (Refer to page 5 for attachment positions.) 2 Secure the ceiling mount bolts. Check z that the ceiling mount bolt locations are strong enough to bear the full weight of the projector. If they are not strong enough, use reinforcements while giving full consideration to the required safety coefficient. 3 Secure the attachment plate to the ceiling mount bolts. In z the side of the attachment plate, the end of the ceiling mount bolts should protrude from the hex nuts by about 5 mm. Be sure to use the commercially available flat washers and spring washers when installing the attachment plate. zmake sure the arrow displayed in the attachment plate points toward the screen while attaching. Use z only size M8 or 5 / 16 " ceiling mount bolts, hex nuts, flat washers and spring washers. All z bolts and nuts should be securely tightened, and sufficient measures such as using two nuts or painting should be employed as necessary to prevent any loosening. Two nuts zinstalling to a concrete structure Ceiling surface To the screen Attachment plate Hex nut Anchoring nut or curled plug Concrete Flat washer Spring washer Hex nut Ceiling mount bolt (M8 or 5 / 16 ") Spring washer Flat washer Approx. 5 mm (3/16") Bracket fixing screw 1 Attach the anchoring nuts or curled plugs to a concrete ceiling and securely fix the four ceiling mount bolts. (Refer to page 5 for attachment positions.) When z installing the anchoring nuts or curled plugs, adhere strictly to the installation instructions supplied by the manufacturer of the nuts, so they will not loosen in the concrete structure or be dislodged from the intended positions. Check z to make sure that the concrete ceiling structure can easily bear the whole weight of the projector and the ceiling mount bracket. If it is found to be fragile or degraded, use steel or wooden reinforcements. 2 Secure the attachment plate to the ceiling mount bolts. In z the side of the attachment plate, the ends of the ceiling mount bolts should protrude from the hex nuts by about 5 mm. Be sure to use the commercially available flat washers and spring washers when installing the attachment plate. Make z sure the arrow displayed in the attachment plate points toward the screen while attachment. 6 - ENGLISH

7 Installation (continued) Installing the brackets to the projector Install the projector mount bracket to the projector (sold separately) first, then install the adjustable bracket unit. Note For z installing the projector mount bracket to the projector (sold separately), refer to the Installation Instructions of the Projector Mount Bracket. Adjustable bracket unit Secure in 4 places. As shown in the figure on the left, install the adjustable bracket unit to the projector mount bracket with the 4 supplied captive washer hex head bolts (M6 12). * The illustrations of projector and the projector mount bracket in this instruction are for informational purposes only and do not represent a specific model. ENGLISH - 7

8 Installation (continued) Suspending the projector Bracket fixing screw Attachment plate Hooks Hooks Safety fixing screw (M4) Bracket fixing screw Hooks (This figure is viewed from below.) 1 Loosen the bracket fixing screw of the attachment plate and the safety fixing screw. 2 Insert the hooks of the adjustable bracket unit into the three holes in the attachment plate, then rotate the projector in the direction of the arrow. Loosen z the bracket fixing screw and the safety fixing screw as shown in the figure on the left before inserting the hooks of the adjustable bracket unit. Hold z the projector firmly until inserting the hooks of adjustable bracket unit into the holes in the attachment plate and the rotating the projector are finished. WARNING Mounting and installation must be carried out by two or more persons. 3 Temporarily tighten the bracket fixing screw. After z the installation angle adjustment on page 9, tighten the bracket fixing screw securely with fingers. 4 Use a torque screwdriver to tighten the safety fixing screw. Bracket fixing screw Safety fixing screw (M4) Rear of projector 8 - ENGLISH

9 Adjusting the installation angle It z is possible to adjust the horizontal swing and also the horizontal and vertical tilt of the ceiling mount bracket. For z the projector with the lens shift function, check that the projector lens is in the standard position* 1, and adjust the positioning of the projected image and the screen. While z referring to the operating instructions for the projector, project a picture onto the screen and then adjust the picture size and focus. After making these adjustments, adjust the ceiling mount bracket angle. * 1 For the projector with the lens shift function, standard position is a state when the lens position is in the center (lens center). If the picture is too far to the left or right of the screen 1 Loosen the bracket fixing screw in the attachment plate, turn the projector right and left to perpendicularly align the center of the screen with the center of the image. Bracket fixing screw 2 Once the picture is positioned correctly, securely tighten the bracket fixing screw with the fingers. Do z not loosen the bracket fixing screw too much, otherwise the projector may fall down. For z the projector with the lens shift function, it can also be adjusted by using the lens shift function. If the picture is too far to the top or bottom of the screen 1 Loosen the captive washer hex head bolts at the Captive washer hex head bolts (one each at the left and right) If the picture is tilted to the left or right Note sides of the projector mount bracket (one at each side) and also loosen the angle fixing screw (1), and then move the rear of the projector up or down to adjust the position of the picture with respect to the screen. 2 Once the picture is positioned correctly, securely tighten the captive washer hex head bolts (one at each side) and the angle fixing screw (1). Do z not loosen the captive washer hex head bolts and the angle fixing screw too much, otherwise the projector may fall down. 1 Loosen the captive washer hex head bolts at the front and rear of the projector mount bracket (two at each end), and adjust the left and right tilt of the projector, to correct the projected image. 2 Once the picture is positioned correctly, securely tighten the captive washer hex head bolts (two at each end). Do z not loosen the captive washer hex head bolts too much, otherwise the projector may fall down. If z there is still vertical keystone distortion after adjusting the angle of the ceiling mount bracket and Keystone in the Position on screen menu has not been adjusted, the screen and projector are not correctly aligned. Check the standard installation dimensions while referring to Standard installation dimensions on the installation instruction of the projector mount bracket. Or adjust keystone on the projector. Rear Rotation range ±5 Angle fixing screw (M4) 5 upward From center of attachment plate to center of rotation 9.5 (3/8 ) Captive washer hex head bolts (two each at each end) ±10 Rear 15 downward To the screen zafter checking the position adjustments, check that the screws have been tightened to the torques specified on page 5. ENGLISH - 9

10 Installation of ceiling mount bracket drop-prevention kit Use the drop-prevention kit supplied with the projector mount bracket (sold separately) to prevent the projector from falling. Note For z attaching the wire rope to the projector, refer to the installation instructions for the separately sold projector mount bracket. The procedure in the following shows a case of installation on the concrete ceiling. Wire rope 1 As shown in the figure on the left, pass the wire rope through the hole between the attachment plate and the adjustable bracket unit. max. 500 mm (19-11 / 16 ") (recommended) Anchoring nut or curled plug (M8 or 5 / 16 ")* 1 Anchor 2 Mount the commercially available anchoring nut or curled plug (M8 or 5 / 16 ") onto a sturdy concrete ceiling (at the position shown in the figure on the left). If z it is to be attached to a wooden surface, mount the commercially available ceiling mount bolts onto the holes drilled in the wooden ceiling beam, in the same manner as the procedure of mounting the attachment plate described in the page 6. Wire rope* 2 Flat washer (M8)* 2 Hex head bolt (M8 or 5 / 16 ")* 1 Spring washer (M8 or 5 / 16 ")* 1 *1: Commercially available product *2: Supplied with the optional projector mount bracket zwhen mounting the commercially available anchoring nut or curled plug (M8 or 5 / 16 "), be careful that there is no slack between the projector and the ceiling. 3 Tighten the commercially available hex head bolt (M8 or 5 / 16 ") to the anchor, passing it through the commercially available spring washer (M8 or 5 / 16 "), the supplied flat washer (M8) on the projector mount bracket, and the loop at the end of the wire rope. If z it is to be attached to a wooden surface, pass the loop at the end of the wire rope, the flat washer (M8) supplied with the projector mount bracket, and a commercially available spring washer (M8 or 5 / 16 ") through the attached ceiling mount bolt and fix with a commercially available hex nut (M8 or 5 / 16 "). zpurchase the commercially available anchoring nut or curled plug, hex head bolt, and spring washer. Tense z the wire rope without making influence to the image position ENGLISH

11 Specifications Range of adjustment Vertical tilt correction angle 5 above horizontal, 15 below horizontal Horizontal tilt correction angle ± 10 Horizontal swing correction angle ± 5 External dimensions Weight Width: 160 mm (6-5 / 16 ") Height: 76 mm (2-31 / 32 ") Depth: 150 mm (5-29 / 32 ") Approx. 0.7 kg (1.54 lbs) ENGLISH - 11

12 Panasonic Corporation Web Site : Panasonic Corporation 2014 SS0514JY1037 -ST Printed in Japan

Installation Instructions

Installation Instructions Installation Instructions Ceiling Mount Bracket (for Low Ceilings) Model No. ET-PKR100S Thank you for purchasing this Panasonic product. To customers The Installation Instructions is intended for use by

More information

Installation Instructions

Installation Instructions Installation Instructions Ceiling Mount Bracket for DLP Based Projectors (for High Ceilings) Model No. ET-PKD100H Contents Important Safety Notice.................. 2 For DLP Based Projector: PT-D10000

More information

Installation Instructions

Installation Instructions Installation Instructions Projector Mount Bracket Model No. ET-PKD520B ENGLISH * The figure above shows this product combined with the separately sold ET-PKD520H Ceiling Mount Bracket (for High Ceilings).

More information

PMT-L31 (for Low Ceilings) PMT-H35 (for High Ceilings)

PMT-L31 (for Low Ceilings) PMT-H35 (for High Ceilings) English Ceiling Mount Bracket PMT-L31 (for Low Ceilings) PMT-H35 (for High Ceilings) Installation Manual Be sure to read this manual thoroughly before using this bracket. After you have read this manual,

More information

ELPMB27. Short Throw Projector Wall Mount Installation Manual xxx(fr) xxx(de) xxx(it) xxx(es) xxx(pt) xxx(zhs)

ELPMB27. Short Throw Projector Wall Mount Installation Manual xxx(fr) xxx(de) xxx(it) xxx(es) xxx(pt) xxx(zhs) ELPMB27 Short Throw Projector Wall Mount Installation Manual xxx(fr) xxx(de) xxx(it) xxx(es) xxx(pt) xxx(zhs) Safety Instructions Before using the wall mount, make sure you read all of the safety instructions

More information

incorrect use or handling that exceeds normal operating limits.

incorrect use or handling that exceeds normal operating limits. User s Manual Wall mount unit for projectors Model name HAS-WM06 Thank you for purchasing a wall mount unit specially designed for Hitachi projectors. Be sure to read this manual and the User s Manual

More information

INSTALLATION MANUAL PBL-UMP

INSTALLATION MANUAL PBL-UMP INSTALLATION MANUAL PBL-UMP Table of Contents Warning Statements... 4 Parts List... 5 Installation Tools... 5 Features... 7 Projector Preparation... 8 Bracket Installation... 10 Leveling the Mounting Bracket...

More information

Model POA-CHB-XL50. Assembly and Installation Manual. Projector Bracket. Contents. Be sure to consult with a qualified installation specialist

Model POA-CHB-XL50. Assembly and Installation Manual. Projector Bracket. Contents. Be sure to consult with a qualified installation specialist Assembly and Installation Manual Projector Bracket Model POA-CHB-XL50 Be sure to consult with a qualified installation specialist This bracket is specifically for use with our projector. Be especially

More information

INSTALLATION MANUAL ELPMBUNI

INSTALLATION MANUAL ELPMBUNI INSTALLATION MANUAL ELPMBUNI Warning Statements WARNING: WARNING: WARNING: WARNING: PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN

More information

PMT-L11 (for Low Ceilings) PMT-H15 (for High Ceilings)

PMT-L11 (for Low Ceilings) PMT-H15 (for High Ceilings) English Français Deutsch Svenska Italiano Español Nederlands Digital Cinema Projector Ceiling Bracket PMT-L11 (for Low Ceilings) PMT-H15 (for High Ceilings) Installation Manual Be sure to read this manual

More information

Assembly Instructions for model: VMPR1

Assembly Instructions for model: VMPR1 Assembly Instructions for model: VMPR1 Congratulations on your purchase! The VMPR1 ceiling mount provides a unique, simplified method of ceiling mounting inverted LCD/DLP projectors. Its low profile design

More information

Operating Instructions

Operating Instructions Operating Instructions Fixed-focus Lens Commercial Use Model No. ET-D75LE95 ENGLISH FRANÇAIS Thank you for purchasing this Panasonic product. To ensure correct use of this lens, please read the operating

More information

INSTALLATION INSTRUCTIONS Small Flat Panel Height-Adjustable, Extended Pitch Swing Arm Wall Mount Model KWE-110

INSTALLATION INSTRUCTIONS Small Flat Panel Height-Adjustable, Extended Pitch Swing Arm Wall Mount Model KWE-110 INSTALLATION INSTRUCTIONS Small Flat Panel Height-Adjustable, Extended Pitch Swing Arm Wall Mount Model KWE-110 The KWE dual swing arm wall mount is designed to provide a broad range of viewing for Small

More information

Universal flat-panel mount

Universal flat-panel mount I N S T A L L A T I O N M A N U A L Universal flat-panel mount www.christiedigital.com PM 2004/ REV 02 Contents - Assembly drawing - Fine tune tilt adjustments - Parts list - Installing the adapter plate

More information

INSTALLATION MANUAL PBC-UMS

INSTALLATION MANUAL PBC-UMS INSTALLATION MANUAL. PBC-UMS Premier Mounts 3130 E. Miraloma Avenue Anaheim, CA 92806 Phone: (800) 368-9700 Fax: (800) 832-4888 mounts@mounts.com www.mounts.com Rev. 01 PBL-110 Projector Mount Page 2 Installation

More information

INSTALLATION MANUAL ELPMB50

INSTALLATION MANUAL ELPMB50 INSTALLATION MANUAL ELPMB50 Frame for Epson projectors Epson EB-L1100 Epson EB-L1200 Epson EB-L1300 Epson EB-L1405 Epson EB-L1500 Epson EB-L1505 Safety instructions 1 Product description 5 Installing the

More information

MPA-9000 Universal Ceiling Projector Mount Kit

MPA-9000 Universal Ceiling Projector Mount Kit I N S T R U C T I O N M A N U A L Universal Ceiling Projector Mount Kit The Universal Ceiling Projector Mount provides a unique, simplified method of ceiling mounting your inverted projector. This low

More information

Projector Ceiling Mount

Projector Ceiling Mount INSTALLATION MANUAL Projector Ceiling Mount PID:3010 PID:5466 20kg (44lbs) RATED CAUTION: DO NOT EXCEED RATED LISTED WEIGHT. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR! ISSUED: FEB. 2013 NOTE: Read the

More information

Elements Pole Mounting System

Elements Pole Mounting System Elements Pole Mounting System Installation Manual www.peavey.com Elements Pole Mounting System Installation Manual The Elements Pole Mounting System is a simple and straightforward pole mounting solution

More information

Wooden Frame Type Instruction Manual

Wooden Frame Type Instruction Manual Wooden Frame TypeInstruction Manual Thank you for selecting our product. Before starting installation, please read this manual thoroughly to ensure correct installation. Please keep this manual at hand

More information

Wall Mount Bracket YM-81

Wall Mount Bracket YM-81 CN/JA/EN/DE/FR/ES/IT/SV/RU/PT/TR/NL/PL/FI/CS/NO/LT/TH/ID/MS/VI/TW/KO/AR Wall Mount Bracket YM-81 English User s Guide Deutsch Bedienungsanleitung Français Mode d emploi Español Italiano Svenska Português

More information

Bracket Assembly and Installation Manual

Bracket Assembly and Installation Manual Bracket Assembly and Installation Manual Model POA-CHB-DWL2500 Contents Installation Precautions ------------------------- 1 Parts list -------------------------------------------- 2 Attach the Projector

More information

INSTALLATION INSTRUCTIONS Small Flat Panel FMA Pivot Arrays Models: FMA-220 and FMA-320

INSTALLATION INSTRUCTIONS Small Flat Panel FMA Pivot Arrays Models: FMA-220 and FMA-320 INSTALLATION INSTRUCTIONS Small Flat Panel FMA Pivot Arrays The FMA-220 and FMA-320 pivot array allow both horizontal and vertical display pitch adjustment. The pitch adjustment range is 30 (15 up / 15

More information

PWM-T210 Installation Instructions UNIVERSAL FLAT PANEL MOUNT

PWM-T210 Installation Instructions UNIVERSAL FLAT PANEL MOUNT UNIVERSAL FLAT PANEL MOUNT IN-PWMT210.R0 TABLE OF CONTENTS Warning Statements 3 Parts List 4 Installation Tools 4 Locating the Center of the 5 Mounting Bracket Positioning 5 Securing the Mounting Brackets

More information

Fixed Wall Arm. Installation Guide. Part number Rev E 2012 PolyVision Corporation All rights reserved

Fixed Wall Arm. Installation Guide. Part number Rev E 2012 PolyVision Corporation All rights reserved Fixed Wall Arm Installation Guide Part number 2002003-001 Rev E 2012 PolyVision Corporation All rights reserved Table of contents Important Safety Instructions... 3 Overview... 4 Important considerations...

More information

CMA-455 Suspended Ceiling-Tile Reinforcing Kit

CMA-455 Suspended Ceiling-Tile Reinforcing Kit INSTALLATION INSTRUCTIONS CMA-455 Suspended Ceiling-Tile Reinforcing Kit The provides a sturdy support for LCD/DLP hanging brackets (and certain other products) when installing these products in a suspended

More information

Aluminum Frame Type Instruction Manual

Aluminum Frame Type Instruction Manual Aluminum Frame TypeInstruction Manual Thank you for selecting our product. Before starting installation, please read this manual thoroughly to ensure correct installation. Please keep this manual at hand

More information

Operating Instructions

Operating Instructions Operating Instructions Lens Fixed Attachment Commercial Use Model No. ET-PLF10 ENGLISH Thank you for purchasing this Panasonic product. To ensure safe and correct use, please read this manual together

More information

Universal Projector Ceiling Mount Model: DPM-45

Universal Projector Ceiling Mount Model: DPM-45 Universal Projector Ceiling Mount Model: DPM-45 Instruction Manual Images may different from actual product Disclaimer It is Dyconn s intention to have all the correct information represented within this

More information

SAM. Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual. Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" Page 20

SAM. Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual. Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42-55 Page 20 SAM Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" 20 Step 6 LCD Mobile Lift Stand Model: STV-C65 Cable management

More information

Wall mounting bracket

Wall mounting bracket Install Manual Wall mounting bracket Please read this manual carefully before operating your set and retain it for future reference. OSW200 P/NO : MFL63640578 (1502-REV01) www.lg.com COMPONENT Install

More information

Mounts by. Model PMU50 PROJECTOR MOUNT. Simple to adjust no-tools required

Mounts by. Model PMU50 PROJECTOR MOUNT. Simple to adjust no-tools required Mounts by A division of David Engineering & Mfg. Inc. Model PMU50 PROJECTOR MOUNT Thank you for purchasing the PDR Projector mount with the exclusive Bayonet locking system. To ensure the correct usage,

More information

Flat Panel Dual Swing Arm Wall Mount (FWD-110) MSP-SA

Flat Panel Dual Swing Arm Wall Mount (FWD-110) MSP-SA INSTALLATION INSTRUCTIONS Flat Panel Dual Swing Arm Wall Mount (FWD-110) The dual arm wall mount was designed to support flat panel displays with 10 to 30 diagonal screens and weighing a maximum of 40

More information

INSTALLATION MANUAL FLAT LCD DISPLAY MOUNT MODEL

INSTALLATION MANUAL FLAT LCD DISPLAY MOUNT MODEL INSTALLATION MANUAL FLAT LCD DISPLAY MOUNT MODEL CMK Ceiling WARNING! The wall, floor or ceiling should be capable of supporting a weight of at least five (5) times the monitor s weight. If it cannot,

More information

Small Flat Panel Height-Adjustable Dual Swing Arm Wall Mount With Universal Slat Wall Mount (MSP-JS-KWG-110)

Small Flat Panel Height-Adjustable Dual Swing Arm Wall Mount With Universal Slat Wall Mount (MSP-JS-KWG-110) INSTALLATION INSTRUCTIONS Small Flat Panel Height-Adjustable Dual Swing Arm Wall Mount With Universal Slat Wall Mount () The dual swing arm desk mount is a sleek design providing a broad range of viewing

More information

Installing Brackets to Minimize Distortion in Your SMART Board 685ix Interactive Whiteboard System s Projected Image

Installing Brackets to Minimize Distortion in Your SMART Board 685ix Interactive Whiteboard System s Projected Image UX60-RFK-685 Installing Brackets to Minimize Distortion in Your SMART Board 685ix Interactive Whiteboard System s Projected Image Follow these instructions to install brackets on your SMART Board 685ix

More information

LCD DISPLAY MOUNT

LCD DISPLAY MOUNT I N S T A L L A T I O N M A N U A L 38-804769-01 LCD DISPLAY MOUNT WWW.CHRISTIEDIGITAL.COM Contents - Assembly drawing - Securing the bottom wall plate - Fine tune adjustments - Marking the top plate mounting

More information

Installation Guide Guide d installation

Installation Guide Guide d installation Installation Guide Guide d installation Safety Instructions For your safety, read all the instructions in this guide before using the wall mount. Incorrect handling that ignores instructions in this guide

More information

Installation Guide. English. English

Installation Guide. English. English Installation Guide Safety Instructions For your safety, read all the instructions in this guide before using the setting plate. Incorrect handling that ignores instructions in this guide could damage the

More information

NOVA-EXT Versatile Projector Mount Model: NOVA-EXT

NOVA-EXT Versatile Projector Mount Model: NOVA-EXT INSTALLATION MANUAL NOVA-EXT Versatile Projector Mount Model: NOVA-EXT NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 800-368-9700 Fax: 800-832-4888 Other Locations

More information

Showpiece Cabinet Integrated Stand For 32" - 52" LCD HDTV

Showpiece Cabinet Integrated Stand For 32 - 52 LCD HDTV Showpiece Cabinet Integrated Stand For 32" - 52" LCD HDTV Installation and Assembly Instructions 2009 Incredible Technologies Inc. Version 0109 Showpiece Cabinet Integrated Stand for 32" - 52" LCD HDTV

More information

MSP-WRTIDSKY1 Light Weight Suspended Ceiling Kit for use with Island Display Skybox

MSP-WRTIDSKY1 Light Weight Suspended Ceiling Kit for use with Island Display Skybox INSTALLATION INSTRUCTIONS MSP-WRTIDSKY1 Light Weight Suspended Ceiling Kit for use with Island Display Skybox The MSP-WRTIDSKY1 Light Weight Suspended Ceiling Kit provides a sturdy support for LCD displays

More information

Model MSPPWRTW Large Flat Panel Single Arm Wall Mount

Model MSPPWRTW Large Flat Panel Single Arm Wall Mount INSTALLATION INSTRUCTIONS Model Large Flat Panel Single Arm Wall Mount The is wall-mounted, rugged, versatile, and installer-friendly. The mount is compatible with the standard (14 x 14 ) PSB interface

More information

PAM-200 Universal Projector Mount

PAM-200 Universal Projector Mount INSTALLATION MANUAL PAM-200 Universal Projector Mount Sony Electronics 16540 West Bernardo Drive San Diego, CA 92127 www.sony.com IN-PAM200.R0 Table of Contents Parts List...- 3 - Installation Tools...-

More information

SB-WM-ART2-L-BL SB-WM-ART2-XL-BL

SB-WM-ART2-L-BL SB-WM-ART2-XL-BL SB-WM-ART2-L-BL SB-WM-ART2-XL-BL Weatherproof Universal Dual-Arm Articulating Mount for Large TVs INSTALLATION MANUAL WARNING The maximum weight of this wall mount is 150 lbs (68.04 kg). Use with heavier

More information

INSTALLATION INSTRUCTIONS HEAVY DUTY TILT WALL MOUNT Model: PPH-2000

INSTALLATION INSTRUCTIONS HEAVY DUTY TILT WALL MOUNT Model: PPH-2000 INSTALLATION INSTRUCTIONS HEAVY DUTY TILT WALL MOUNT Model: PPH-2000 Specifications: Accomodates Akira and Orion 84" displays without interface bracket; accomodates other large flat panel displays with

More information

INSTALLATION INSTRUCTIONS. PLASMA TV WALL MOUNT TILT Universal (RGTU-210) WARNINGS WARNING

INSTALLATION INSTRUCTIONS. PLASMA TV WALL MOUNT TILT Universal (RGTU-210) WARNINGS WARNING PLASMA TV WALL MOUNT TILT Universal (RGTU-210) S CAUTION CAUTION CAUTION A alerts you to the possibility of serious injury or death if you do not follow the instructions. A CAUTION alerts you to the possibility

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Universal Low Profile Flat Mount Model: U.S. Toll Free: 1-866-752-6271 Outside N. America: 1-503-748-5799 E-mail: ts@planar.com FRANCE Phone: +33 5 6378 3810 E-mail: emeats@planar.com

More information

Medium Flat Panel Dual Swing Arm Wall Mount JWD-V

Medium Flat Panel Dual Swing Arm Wall Mount JWD-V INSTALLATION Medium Flat Panel Dual Swing Arm Wall Mount The single swing arm wall mount is designed for mounting a medium sized flat panel display. The can swing out from, or fold against, the wall depending

More information

Installation Guide. English. English

Installation Guide. English. English Installation Guide Safety Instructions For your safety, read all the instructions in this guide before using the setting plate. Incorrect handling that ignores instructions in this guide could damage the

More information

Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens

Installation and Assembly - Universal Articulating Swivel Double-Arm for 42 - 60 Plasma Screens Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens Models: PLAV 70-UNL, PLAV 70-UNL-S PLAV 70-UNLP, PLAV 70-UNLP-S R This product is UL Listed. It must be

More information

WARNING INSTALLATION MANUAL 1. SAFETY PRECAUTIONS 2. GENERAL DESCRIPTION TABLE OF CONTENTS

WARNING INSTALLATION MANUAL 1. SAFETY PRECAUTIONS 2. GENERAL DESCRIPTION TABLE OF CONTENTS INSTALLATION MANUAL SPEAKER connection brackets HY-CN7B, HY-CN7W, HY-CN7B-WP, HY-CN7W-WP Thank you for purchasing TOA's Speaker Connection Brackets. Please carefully follow the instructions in this manual

More information

INSTALLATION INSTRUCTIONS. Large Flat Panel Wall Mount Model: PRO-2000 Series

INSTALLATION INSTRUCTIONS. Large Flat Panel Wall Mount Model: PRO-2000 Series INSTALLATION INSTRUCTIONS Large Flat Panel Wall Mount Model: PRO-2000 Series PRO-2000 Series Wall Mount Features: Accommodates large flat screens weighing up to 200 lbs (90.7 kg). Mounting brackets adapt

More information

Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens

Installation and Assembly - Universal Articulating Swivel Double-Arm for 42 - 60 Plasma Screens Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens Models: PLAV 70-UNL, PLAV 70-UNL-S PLAV 70-UNLP, PLAV 70-UNLP-S R This product is UL Listed. It must be

More information

LC200DS1 Double Stud Articulating Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns

LC200DS1 Double Stud Articulating Wall Mount for Flat Panel Screens up to 32 with up to 200mm x 200mm VESA Mounting Patterns Page 1 of 6 LC200DS1 Double Stud Articulating Wall Mount for Flat Panel Screens up to 32" with up to 200mm x 200mm VESA Mounting Patterns A multi-position dual articulating arm for flat screens up to 60

More information

Heavy Duty Ceiling Tilt Mount Installation Manual

Heavy Duty Ceiling Tilt Mount Installation Manual HD-CTM-5580 Heavy Duty Ceiling Tilt Mount Installation Manual *This Installation requires a minimum of two people. For your safety: Read the complete instruction manual before starting an installation

More information

SB-WM-ART1-M-BL. Weatherproof Universal Single-Arm Articulating Mount for Medium Displays INSTALLATION MANUAL

SB-WM-ART1-M-BL. Weatherproof Universal Single-Arm Articulating Mount for Medium Displays INSTALLATION MANUAL SB-WM-ART1-M-BL Weatherproof Universal Single-Arm Articulating Mount for Medium Displays INSTALLATION MANUAL WARNING The maximum weight of this wall mount is 90 lbs (41 kg). Use with heavier than the maximum

More information

RBP-1215B-RX DODGE RAM QUAD CAB RX3

RBP-1215B-RX DODGE RAM QUAD CAB RX3 RBP-1215B-RX3 2002-2017 DODGE RAM 15-3500 QUAD CAB RX3 Passenger side RX-3 Side Step Drill Template Passenger side rear Modular Bracket (6) L Support Brackets Driver side rear Modular Bracket Driver side

More information

ASSEMBLY GUIDE. Mia Narrow Bookcase

ASSEMBLY GUIDE. Mia Narrow Bookcase ASSEMBLY GUIDE Mia Narrow Bookcase Components: Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase. Step

More information

Assembly Instructions for Model: VMPR1

Assembly Instructions for Model: VMPR1 Assembly Instructions for Model: VMPR1 Thank you for choosing a Sanus Systems Model: VMPR1 ceiling mount. The VMPR1 ceiling mount provides a unique, simplified method of ceiling mounting inverted LC/LP

More information

Mounting a BalanceBox 400 to a brick wall

Mounting a BalanceBox 400 to a brick wall Unpack the BalanceBox 400 and remove the Wall frame cover and its bag of screws. Slide the cover out at the top. NOTE: the cover is NOT included with the BalanceBox 400H LOCK SCREW HOLE MOBILE STAND MOUNTING

More information

INSTALLATION INSTRUCTIONS Medium Flat Panel Model MSP-SI1

INSTALLATION INSTRUCTIONS Medium Flat Panel Model MSP-SI1 INSTALLATION INSTRUCTIONS Medium Flat Panel Model MSP-SI1 IMPORTANT! : The MSP-S11 Mount is designed for use with Sharp 45" LCD displays that have a 200mm x 200mm mounting pattern. IMPORTANT! : The mount

More information

Universal flat-panel mount

Universal flat-panel mount R I N S T A L L A T I O N M A N U A L Universal flat-panel mount LISTED E176225 3130 E. Miraloma Ave. Anaheim, CA 92806 Phone: 800 368-9700 Fax: 800 832-4888 www.mounts.com PREMIER MOUNTS 2004/ REV 00

More information

LCD MONITOR/TV WALL MOUNT

LCD MONITOR/TV WALL MOUNT INSTALLATION INSTRUCTIONS LCD MONITOR/TV WALL MOUNT DUAL DESK CLAMP (RFCD-110) S CAUTION CAUTION A alerts you to the possibility of serious injury or death if you do not follow the instructions. A CAUTION

More information

INSTALLATION MANUAL SFM3

INSTALLATION MANUAL SFM3 INSTALLATION MANUAL SFM3 Sony Electronics, Inc. 16540 West Bernardo Drive San Diego, CA 92127 www.sony.com IN-SFM3.R0 Table of Contents WARNING STATEMENTS...- 3 - PARTS LIST...- 4 - INSTALLATION TOOLS...-

More information

INSTALLATION MANUAL H A

INSTALLATION MANUAL H A INSTALLATION MANUAL CABINET RACK CR-43-6 (4-UNIT SIZE) Be sure to read this installation manual thoroughly before installing this Cabinet Rack. For the mounting procedures of the components and the relevant

More information

PART #MSP-DCCST Flat Panel Tilt Mount

PART #MSP-DCCST Flat Panel Tilt Mount INSTALLATION INSTRUCTIONS PART # Flat Panel Tilt Mount The Flat Panel Tilt Mount is a quick disconnect mounting solution for flat panel displays. The mount features adjustability between 0 and 15 degrees

More information

**MOUNTING YOUR MONITOR

**MOUNTING YOUR MONITOR FPP72V200 72 FREE STANDING DISPLAY CART Assembly Instructions Hardware List Ref. Qty. Part No. Description AA 4 030-1128 1/4-20 UNC, 1 3/4 Socket Hd Screws BB 1 030-1129 5/8-11 UNC 1 3/4 Socket Hd Screw

More information

INSTALLATION INSTRUCTIONS SLBU / SLMU UNIVERSAL INTERFACE BRACKETS

INSTALLATION INSTRUCTIONS SLBU / SLMU UNIVERSAL INTERFACE BRACKETS INSTALLATION INSTRUCTIONS SLBU / SLMU UNIVERSAL INTERFACE BRACKETS The Universal Interface Bracket provides a solution for simplifying inventory of RPA and RPM series mounts and SLB/SLM projector brackets.

More information

Installation Instruction

Installation Instruction Tools Needed for Assembly Stud finder (for wood stud wall) Pencil Mark Electric drill Wood Stud Wall Installation Step 1. Locate the Wood Studs Installation Instruction Drill bit (for wood stud wall) Masonry

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS SPORTSMAN WINCH MOUNT GRILLE GUARD APPLICATION: 2016-2018 Toyota Tacoma PART NUMBER: 40-93885, 45-93880, 46-23885 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 WINCH TRAY 15MM SOCKET

More information

Planar FWMG-MXL INSTALLATION INSTRUCTIONS

Planar FWMG-MXL INSTALLATION INSTRUCTIONS Planar FWMG-MXL INSTALLATION INSTRUCTIONS Fixed Wall Mount for Ultra Large Displays 50-98 weighing less than 300 lbs. Part Number: 955-0217-00 Planar, A Leyard 1195 NW Compton Drive Beaverton, OR 97006

More information

SINCE 1922 P UBLICATION N O

SINCE 1922 P UBLICATION N O SINCE 1922 GARED SPORTS MICRO-Z SET-UP INSTRUCTIONS VERY IMPORTANT! READ INSTRUCTIONS CAREFULLY AND FOLLOW STEP BY STEP SET-UP PROCEDURE P UBLICATION N O. 5 5 1 7 5 2 9 1 6 Recommended tools and accessories.

More information

19 to 39 TV WALL MOUNT - FULL MOTION

19 to 39 TV WALL MOUNT - FULL MOTION 19 to 39 TV WALL MOUNT - FULL MOTION RF-HTVMMAB For wood-stud and concrete wall installations Safety information and specifications...2 Tools needed...2 Package contents...3 Installation instructions...5

More information

MM540 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS

MM540 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS MM50 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS Please read this entire manual before you begin. Do not unpack any contents until you verify all requirements on PAGE.

More information

Installation and Assembly: Flat Video Wall Mount For 40" to 65" Flat Panel Displays

Installation and Assembly: Flat Video Wall Mount For 40 to 65 Flat Panel Displays Installation and Assembly: Flat Video Wall Mount For 40" to 65" Flat Panel Displays Model: DS-VW665 Maximum Load Capacity: 125 lb (57 kg) 1 of 11 ISSUED: 03-22-12 SHEET #: 125-9288-4 06-25-13 NOTE: Read

More information

INSTALLATION INSTRUCTIONS POLE/PITCH- ADJUSTABLE MOUNT Model: TPM-2000 SERIES

INSTALLATION INSTRUCTIONS POLE/PITCH- ADJUSTABLE MOUNT Model: TPM-2000 SERIES INSTALLATION INSTRUCTIONS POLE/PITCH- ADJUSTABLE MOUNT Model: TPM-2000 SERIES Specifications: Weight capacity of 150 lbs. (68 kg). Provides tilt range from 5 up to 15 down. Accommodates vertical pole (1"

More information

PFW 6851 Display Wall Mount, Turn & Tilt 80 kg INSTALLATION INSTRUCTIONS

PFW 6851 Display Wall Mount, Turn & Tilt 80 kg INSTALLATION INSTRUCTIONS Display Wall Mount, Turn & Tilt 80 kg INSTALLATION INSTRUCTIONS 9531-007-Z00-01 Table of Contents Warning Statements 2 Parts List 3 Installation Tools 3 Wood Stud Installation 5 Concrete Surface Installation

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Universal Low Profile Tilt Mount Model: U.S. Toll Free: 1-866-752-6271 Outside N. America: 1-503-748-5799 E-mail: ts@planar.com FRANCE Phone: +33 5 6378 3810 E-mail: emeats@planar.com

More information

southpaw enterprises, inc.

southpaw enterprises, inc. Eye Bolt Wrap 7001 Store these instructions with the enclosed maintenance checklist in a safe place. You may also access them on our website. this in an accessible location: the must be read and familiar

More information

LC200WT Security Wall Mount with Tilt for up to 32" Flat Screens

LC200WT Security Wall Mount with Tilt for up to 32 Flat Screens Page 1 of 6 The LC200WT Security Wall Mount with Tilt is designed to secure up to a 32" flat panel monitor to the wall while still allowing the monitor to tilt. The VESA mounting patterns on the front

More information

Owner's Manual Laser Display install guide

Owner's Manual Laser Display install guide Owner's Manual Laser Display install guide Please read the safety information carefully before using the product. P/NO : MFL67652408(1302-REV00) www.lg.com 2 Safety Precautions Safety Precautions Please

More information

v1.0 ASSEMBLY GUIDE Mia Wide Bookcase

v1.0 ASSEMBLY GUIDE Mia Wide Bookcase v1.0 ASSEMBLY GUIDE Mia Wide Bookcase Components Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase.

More information

MSP-DCCPGTU Large Screen Tilt Display Mount

MSP-DCCPGTU Large Screen Tilt Display Mount INSTALLATION INSTRUCTIONS Large Screen Tilt Display Mount The Large Screen Tilt Display Mount is a quick disconnect mounting solution for large flat panel displays. The mount features infinite adjust ability

More information

PART #MSP-DCCPPWS Plasma Wall Swing-Out (PWS) Wall Mount

PART #MSP-DCCPPWS Plasma Wall Swing-Out (PWS) Wall Mount I N S T R U C T I O N M A N U A L PART # Plasma Wall Swing-Out (PWS) Wall Mount The wall mount is a rugged, versatile, and installer-friendly solution to unique display mounting requirements. With the

More information

LC6X4WTM Security Wall Mount with Tilt for up to 60" Flat Screens with VESA 600mm x 400mm or less

LC6X4WTM Security Wall Mount with Tilt for up to 60 Flat Screens with VESA 600mm x 400mm or less Page 1 of 6 The LC6X4WTM Security Wall Mount with Tilt is designed to secure a flat screen, up to a 60", to the wall while still allowing the monitor to tilt. The VESA mounting patterns on the front of

More information

ROBOT KR 350. Installation, Connection, Exchange. Ro/Me/03/ en. 1of 26

ROBOT KR 350. Installation, Connection, Exchange. Ro/Me/03/ en. 1of 26 ROBOT KR 350 Installation, Connection, Exchange 1of 26 e Copyright KUKA Roboter GmbH This documentation or excerpts therefrom may not be reproduced or disclosed to third parties without the express permission

More information

Tilting & Swiveling Plasma/LCD Flat Panel Wall Mount Installation Guide Model: A380SM

Tilting & Swiveling Plasma/LCD Flat Panel Wall Mount Installation Guide Model: A380SM Tilting & Swiveling Plasma/LCD Flat Panel Wall Mount Installation Guide Model: A380SM Easy installation Built-in level for easy positioning Corrective leveling adjustments after installation Forward /

More information

LCD TV WALL MOUNT INSTALLATION INSTRUCTIONS. DUAL Swing Arm (RFWD-110) WARNING

LCD TV WALL MOUNT INSTALLATION INSTRUCTIONS. DUAL Swing Arm (RFWD-110) WARNING INSTALLATION INSTRUCTIONS LCD TV WALL MOUNT DUAL Swing Arm (RFWD-110) WARNINGS WARNING WARNING CAUTION CAUTION The maximum weight to be installed on the RFWD wall mount is 40 lbs. (18.1 kg). The RFWD is

More information

Wall Mounting Bracket

Wall Mounting Bracket OWNER S MANUAL Wall Mounting Bracket Please read this manual carefully before operating your set and retain it for future reference. LSW100B LSW100BG P/NO : MFL63640503 (1101-REV03) www.lg.com * 1 Year

More information

For additional assistance call

For additional assistance call The following pages will help guide you through the process of assembling your new 48 custom prize wheel. Choose an assembly area with plenty of room to lay your pieces on the floor and also a bench or

More information

Taurean Sectional Garage Door INSTALLATION INSTRUCTIONS

Taurean Sectional Garage Door INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN MAKE SURE THESE INSTRUCTIONS ARE READ AND UNDERSTOOD COMPLETELY. THESE INSTRUCTIONS ARE INTENDED FOR PROFESSIONAL GARAGE DOOR INSTALLERS. ALL REFERENCES ARE TAKEN FROM THE INSIDE LOOKING

More information

Installation Instructions

Installation Instructions Articulating Dual Monitor Mount Stand Installation Instructions UNPACKING Carefully open the carton, remove contents, and place them on a protected surface to avoid damage. Check the parts and the Supplied

More information

southpaw enterprises, inc.

southpaw enterprises, inc. southpaw enterprises, inc. Instruction Sheet C-STAND 7100 Store these instructions in a safe place or with the enclosed maintenance checklist Take time to familiarize yourself with the use and maintenance

More information

OB1U INSTALLATION INSTRUCTIONS. Interactive Flat Panel Over White Board Mount

OB1U INSTALLATION INSTRUCTIONS. Interactive Flat Panel Over White Board Mount INSTALLATION INSTRUCTIONS Interactive Flat Panel Over White Board Mount Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description

More information

MM340 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS

MM340 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS MM30 Installation Instructions IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS Please read this entire manual before you begin. Do not unpack any contents until you verify all requirements on PAGE.

More information

LCD/Plasma Mount Manual

LCD/Plasma Mount Manual LCD/Plasma Mount Manual Product Overview: Thank you for your Cheetah Mount purchase. All Cheetah Mounts are designed to provide excellent function, high quality, easy installation and stylish appearance.

More information

Independent Containment System (ICS)

Independent Containment System (ICS) Installing the Independent Containment System (ICS) Complete these instructions to install the Independent Containment System (ICS). Prerequisites This installation requires a team of at least two people.

More information

GARAGE DOOR WITH TORSION SPRING

GARAGE DOOR WITH TORSION SPRING GARAGE DOOR WITH TORSION SPRING DIMENSIONS 9 WIDTH X 7 HEIGHT (2.74m x 2.13m) IMPORTANT SAFETY INSTRUCTIONS WARNING: Read all instructions and warnings before use. Failure to follow all instructions may

More information

ETX Powered Loudspeaker Accessories

ETX Powered Loudspeaker Accessories ETX Powered Loudspeaker Accessories ETX-BRKT10, ETX-BRKT12, ETX-BRKT15, ETX-TCA-S, ETX-TCA-L, and ETX-BRKT35 en Installation Guide en 3 Table of contents 1 Safety 4 2 Installation 6 2.1 Wall mount bracket

More information