VINTNER WINE TOWER HARDWARE TOOLS REQUIRED COMPONENTS cam covers cams 16 - cam screws. 1 - pull small screws.

Transcription

1 HRDWRE 16 - cams 16 - cam s 16 - cam covers 1 - pull 1 - pull bolt 40 - wood dowels 28 - small s 8 - medium s Thank you for purchasing the Vintner Wine Tower. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. s you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product. 4 - shelf supports 1 - large Missing hardware? Please call for replacements. TOOLS REQUIRED Phillips head driver 1 - plastic anchor 1 - wall 1 - wall strap OMPONENTS 1 - top 1 - slotted 2 - middle s 1 - bottom 2 - front wine racks 1 - large back 1 - small back 2 - back wine racks 1 - front top rail 1 - front bottom rail 2 - drawer side s (1 left, 1 right) 1 - shelf 1 - drawer front 1 - drawer back 1 - drawer bottom 4 - legs 2 - side s (1 left, 1 right) Page 1 of 6

2 top bottom Make sure arrows on each cam point towards edge with nearest holes middle 1 ) Insert 4 cam s into the top as shown. Secure, but do not over tighten, s with a phillips head driver. ) Insert 8 cams into 2 middle s. Make sure arrows on each cam point towards the nearest edge with holes. ) Insert 4 cam s into the bottom as shown. Secure s with a driver. left side front wine rack back wine rack front top rail right side D front bottom rail 2 ) Insert 8 cam s into left and right side s. ) Insert 8 cams into left and right side s. ) Insert 8 wood dowels into left and right side s as shown. Press firmly to secure. 3 ) Insert 8 wood dowels into 2 front wine racks. ) Insert 8 wood dowels into 2 back wine racks. ) Insert 4 wood dowels into 1 front top rail. D) Insert 4 wood dowels into 1 front bottom rail. Made in hina - r044 ustomer Service Page 2 of 6

3 back wine brackets front wine brackets top rail right side bottom rail right side 4 ) Insert 4 wood dowels into 2 middle s as shown. ) Fit wood dowels of middle s into the holes on right side. Using a phillips head driver, turn cams clockwise until each cam securely engages each cam. 5 ) ttach 2 front and back wine racks into right side as shown. ) ttach top and front bottom rail into the right side as shown. left side 6 ttach left side onto assembled unit as shown. Secure all cams. 7 With the assistance of another adult, carefully place assembled unit upside down as shown. ttach bottom onto assembled unit as shown. Secure all cams. Page 3 of 6

4 8 ttach 4 legs onto bottom of assembled unit as shown. Turn each leg clockwise to secure. 9 With the assistance of another adult, carefully place assembled unit upright. ttach top onto assembled unit and secure all cams as shown. large back small back 10 ) Insert slotted into grooves on left and right side of assembled unit as shown. Slots open to the front of the unit. ) onceal all exposed cams with cam covers. Press firmly to secure. 11 ttach small and large back onto assembled unit as shown with 28 small s. Secure s with a phillips head driver. Page 4 of 6

5 Make sure wheels on each drawer side are at the back. 12 ttach left and right drawer side s to the drawer front as shown with 2 medium s per drawer side. Make sure the wheels on drawer side s are at the back. Secure s with a phillips head driver. 13 Slide drawer bottom into grooves of drawer front and side s. 14 ttach drawer back onto assembled drawer with 2 medium s per drawer side. 15 ttach pull onto drawer front of assembled drawer with 1 pull bolt as shown. Secure bolt with a phillips head driver. Page 5 of 6

6 16 Insert 4 shelf supports into side s of assembled unit as shown between wine racks. Press supports firmly to secure. 17 ) ttach drawer into assembled unit, fitting glides on drawer with corresponding glides on the inside of assembled unit. ) Place shelf into assembled unit. Make sure shelf is securely supported by each shelf support. long top wall strap wall plastic anchor 18 ) Insert 1 wall through wall strap and into top of assembled unit as shown. ) Drill a hole in the wall slightly smaller than the diameter of the plastic anchor. Lightly tap plastic anchor into hole until the anchor is flush with the wall. ) Insert 1 long through wall strap and into the plastic anchor as shown. wall ssembly is now complete. SIDE VIEW LENING ND RE NOTE: This step must be preformed in order to prevent injury due to possible tipping. We recommend you do not skip this step. lean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer. Page 6 of 6