STEP BY STEP INSTALLATION INSTRUCTIONS. Honeycomb Shades. Stationary Arch

Transcription

1 STEP BY STEP INSTALLATION INSTRUCTIONS Honeycomb Shades Stationary Arch

2 Everything You Need A Smooth Set-Up We want you to love your new window coverings and that includes having a smooth installation experience. We recommend saving this guide. If you encounter any difficulties or questions, please reach out to us for help. It s why we re here. Call us at for more info on installation. We recommend you hold on to all packaging until your window coverings are fully installed. Should something go wrong (we strongly doubt it), we want any potential returns to be as painless as possible. Table of Contents Step 1 - Getting Started....3 Overview - Stationary Arch....4 Step 2 - Installation....5 Step 3 - Assemble the Shade...6 Step 4 - Rosette Assembly & Installation....7 Step 5 - Arch Clip Installation...8 Step 6 - Installing the Shade Step 7 - Using the Arch Clips Step 8 - Shade Removal Troubleshooting Care & Cleaning Safety Warranty...Back Cover Customer Service Hours Monday Friday: 6am 6pm PT Saturday Sunday: 7am 4pm PT smithandnoble.com 1 smithandnoble.com

3 2½" Step 1 Parts & Tools Overview Getting Started Stationary Arch First, make sure you have all the parts and tools required to install your shades. ALL THE HARDWARE YOU LL NEED: Pencil, screw-driver, ¼ nut driver, level, and a drill with a 1 16 drill bit. Arch Clip Then find wooden studs where you ll want to attach the brackets; if you need to mount your shades to wallboard or plaster, use a secure fastener designed for hollow wall applications. For metal surfaces, pre-drill holes and use the included screws. For concrete, stone, brick, or tile surfaces, use a masonry drill and appropriate plugs, anchors, or screws. It s important when selecting a fastener to make sure it s designed to support the weight of the shade. Follow the fastener manufacturer s instruction from there on out. SCREWS MOUNTING BRACKET End Cap Fan Mounting Side Mount SIDE MOUNT BRACKET ARCH SUPPORT CLIP SCREWDRIVER & PENCIL (NOT INCLUDED) CENTER SUPPORT BRACKET (OPTIONAL) POWER DRILL (NOT INCLUDED) LEVEL (NOT INCLUDED) 2½" 3 smithandnoble.com

4 Step 2 Installation Standard Mounting Using the installation bracket as a template, measure to the edge of the bracket and mark the hole locations with a pencil for drilling Hex Head Screw BRACKET SCHEDULE BRACKET QTY Side mount (optional) SHADE WIDTH 2 up to 40" 3 401/8" 72" 4 721/8" and up Top Clip Step 3 Assemble the Shade Remove the end caps from the rail. Slide the fabric stack into the middle of the bottom rail. Fan out the fabric and slide the free stiffened cell of the fabric into the rail. Arch Mount end brackets 3" from each side. Note: On arches which are not perfect half circles, one end of the fabric has a straight edge and the other has a Space any remaining brackets evenly. Make sure that all brackets are aligned and level. For the best fit, on a non-perfect half circle in a deeply recessed window opening, position the brackets so that the arch is installed close to the original depth that the template was made. 3" 3" Close up view 3" 3" trimmed (jagged) edge. Orient the fabric so that the trimmed (jagged) edge, when fanned out, will become the outside edge of the arch. The straight side of the fabric stack will form the inner circle of the arch. Slide the stiffened cells into the rail so that the ends of fabric match up with the ends of the bottom rail. Inside the center of the rail, mark where Sidemount Line bracket top with joint where archtop meets top of rectangular window. (A) Mark the holes for screws (B) Remove brackets and drill holes. Insert bugle head screws for keyhole slots only. (C) Approximately 1 8" of the screw should Lower Lip of Endcap - Circular dimples facing down Plastic Stiffener - Adhesive side down, Cut to fit pivot opening the stiffened fabric ends. For perfect half circles only, cut the plastic stiffener provided to fit the pivot opening. Peel the paper liner off the stiffener and adhere it to the bottom rail in the inner circle of the arch. Center the arch on the rail and replace the end caps onto the ends of the rail. The four circular dimples on the end caps should face down. be left protruding. (C) 5 smithandnoble.com

5 Step 4 Rosette Assembly & Installation Step 5 Arch Clip Installation The rosette is sent in a closed stack (A) Foam Tape Rosette Base Tape Rosette Fabric Arch s The number of arch supports needed and their position are determined by Peel off the release liner from the tape on the size and shape of the arch. the top front of the rosette base. ARCH SUPPORT Perfect half circles will require less support than an eyebrow arch. Fan out the fabric and press the fabric onto the tape as shown.(b & C) Fan out Fabric Mark the location for the support clips. Position the clips so that the back of Peel off the release liner from the foam tape on the back top of the rosette base and attach the rosette to the bottom of the clips are the same depth as the back of the installation brackets. the rail. (C) Place a mark at the top center of the window opening. The rosette should be centered on the rail for a half circle. (D) Peel off foam tape backing Press flap onto tape INSIDE MOUNT Space the remaining clips evenly apart. Make sure all clips are at a consistent depth within the sill. Screw the arch support clips to the mounting surface through the hole in the top of the clip (for inside mounts) or through the slot in the back (for OUTSIDE MOUNT outside mounts). 7 smithandnoble.com

6 Step 6 Installing the Shade Step 6 Installing the Shade Standard s Hold the shade up near the brackets and insert the front clip of the bracket into the front groove of the rail. Push the rail back and down until the back clips of the bracket are inserted in the back groove of the rail. Back groove of Back of Front of Bumper Side Mount Side Mount s If the shade is over 48" slide a modified bracket onto the center of the rail. Remove both end caps from the archtop shade. Slide the archtop rail onto the brackets on the rail of the rectangular shade. (Center bracket must not move off center) Remove the end cap from the opposite end of the rectangular shade rail. Slide remaining side mount bracket into both the rectangular and archtop rails. Back groove of Side Mount End Cap Center Center (cutout view) 9 smithandnoble.com

7 Step 6 Installing the Shade Step 7 Using the Arch Clips Side Mount s (continued) Place the Fabric into the Clips Replace the end cap on the rectangular shade before sliding the bracket all the way into place. Arch Clip Find the center of the fabric. Gently press on the fabric until you are able to get the back cell into the top Replace the end caps onto the archtop center support. shade. Next, go to the first clip up from the Hook one bracket onto the screw in the bottom of the arch, and gently lift and fan window frame using the keyhole slot. Bring the other end bracket over the Stationary Arch Fabric (top view) out the fabric until the first section fits the window opening. screw at the other side of the frame. Then gently press on the fabric until Slide down, flexing the bracket inward, until the screw engages in the keyhole slot. Arch Clip you are able to get the back cell into the support clip. Make sure both brackets are slipped Repeat for the remaining clips. all the way in the keyhole slots. Install a screw in the bottom hole of each bracket and tighten the screws in the keyhole slots. Stationary Arch Fabric (side view) Check the fit of the arch fabric to your widow shape. Reposition the fabric in the clips, if necessary. Side Mount End Cap Center Center Check the fit of the arch fabric 11 smithandnoble.com

8 Step 8 Shade Removal Troubleshooting Push the rail in toward the window. Push rail towards window Problem 1. Shade does not fit into opening properly. Solution Slide one side of the fabric off the bottom rail and fan it over to the opposite side. The fabric has been attached Reinsert the fabric on the other end of the rail. Rotate the back of the rail away from the bracket. to the rail in reverse forming an omega shape ( Ω ) hole instead of a smooth arch U. As you release the brackets, support the rail to keep it from falling. Care & Cleaning and Safety Care & Cleaning Minimal care and cleaning is needed to maintain the beauty of your shades. To Vacuum: Use gentle feather duster or soft dust head attachment. To Dust: Use soft, clean cloth. Safety First. Style Second To None Great style should never come at the cost of safety. Every Smith & Noble window treatment conforms strictly to today s safety standards, including permanent tie-down devices and built-in cord stops. To protect young children and pets, there s no better way to eliminate risk than to use one of our MOTIVIA motorized or cordless products. Child Safety 13 smithandnoble.com

9 Warranty Service The enjoyment of your window coverings should be everlasting, which is why our products come with a limited lifetime warranty. The warranty applies to the original owner, requires a proof of purchase and covers defects in material or craftsmanship. Shades or blinds must have been properly installed. We reserve the right to determine if your window covering warrants a repair or a replacement. In need of warranty service? Call us at and we ll arrange for a repair or replacement ASAP Smith & Noble Home, Inc. All Rights Reserved SN052018