What s new in IGEMS R9
|
|
- Lynette Green
- 5 years ago
- Views:
Transcription
1 General changes and CAD-commands What s new in IGEMS R9 Page 1
2 General changes and CAD-commands What s new in IGEMS R9 This document is not a complete manual. It describes only the differences between IGEMS_R8 and IGEMS_R9 Table of contents Chapter 1. General changes and CAD-commands... 3 Improved language support... 3 USB-dongle... 3 Fillet... 3 Object snap Grip... 3 Leader... 4 Improved AutoCAD DWG import... 4 Paper space mode... 4 Chapter 2. Bonus Spur gear generator... 5 Chapter 3. Changes in the 2D-CAM module... 6 Fine Abrasive waterjet (FAW)... 6 Create Part... 7 Automatic quantity... 7 Auto technology in Single and Auto commands... 7 Fence in Sheet prepare... 8 Parts in holes first... 9 Cutoff... 9 Cut of sheets Cut of parts Chapter 4. Bevel cut Loops on plasma cutting Bevel with different angles Standoff in Plasma cutting Loops on WaterJet cutting Advance Bevel Zoom, Pan and Rotate Snap points Delete connections Straight cuts in Advance Bevel Multiple Advance Bevel Parts Chapter 5. Organizer Page 2
3 General changes and CAD-commands Chapter 1. General changes and CAD-commands Improved language support The language support in IGEMS R9 has been improved in order to allow extended languages. USB-dongle IGEMS R9 will be delivered with new USB-dongles. The new dongle will no longer require installation of any software drivers. IGEMS R9 will however still support the old type of Safe Net dongle used in IGEMS R8 and older. Fillet The fillet command now works in two different ways. As before, with two mouse clicks. Image 1 It can now also work using only one single click. Image 2 The single click option is used if both endpoints are inside the pickbox rectangle. Object snap Grip The Grip option has been added to the object snap. Image 3 The Grip option snaps to insertion points of text and blocks. Page 3
4 General changes and CAD-commands Leader A leader command is a dimension command that can be used to add information to various objects. The command asks for text information. Image 4 When you press OK, the inserted text is placed on the drawing. Image 5 Improved AutoCAD DWG import The file format in AutoCAD 2010 is changed from Autodesk. Older versions of IGEMS will not be able to read newer AutoCAD files. The new DWG file format is supported in IGEMS R9. Paper space mode AutoCAD drawings can either be in Paper space or Model space mode when saved as a DWG file. Previous versions of IGEMS support only files made in Model space. IGEMS R9 has support for both modes. This will increase the possibility to use DWG files without special handling in AutoCAD. Page 4
5 Bonus 2010 Chapter 2. Bonus 2010 The Bonus package is always included when updating IGEMS from an older version. It is also free when buying a new license when annual maintenance is included at the purchase. The bonus package in 2010 includes the same features as the Bonus 2009 package but also a spur gear generator. Spur gear generator The spur gear generator is used to create evolvent gears with optional parameters. Image 6 This will show following dialog box. Image 7 General information on input parameters Module=Pitch diameter/teeth Pitch diameter=module*teeth Pressure angle is normally between degrees. AD=Addendum factor is normally set to DE=Dedendum factor is normally set to The input will generate CAD geometry as illustrated below. Image 8 Page 5
6 Changes in the 2D-CAM module Chapter 3. Changes in the 2D-CAM module Fine Abrasive waterjet (FAW) Abrasive waterjet cutting with extremely small nozzles for precision waterjet cutting needs other cutting values than normal AWJ cutting. These kinds of machines are supported in IGEMS_R9. Image 9 This machine type is a sub type to normal waterjet cutting. Image 10 The main difference is that these machines uses other kind of abrasive and has other sizes of nozzles and orifices. Image 11 Page 6
7 Changes in the 2D-CAM module The Orifice goes from 0.06 to 0.12 mm in diameter. Image 12 The Nozzle diameter goes from 0.15 to 0.40 in diameter. Create Part Automatic quantity Automatic Quantity is activated from the Create Part dialog box. Image 13 When this feature is activated the quantity input is disabled. The built in geometry recognition will recognize geometry with identical shape and set the quantity to the number of copies. Image 14 In this example there are two copies of A and C. The quantity setting of these parts will be 2. The other characters will have the quantity of 1. Image 15 This feature can be used if you want to use multiple cutting heads in Auto nesting. Auto technology in Single and Auto commands Note! This feature is only available for AWJ cutting! In IGEMS you can mix different lead-ins, lead outs and piercings in any combinations. This is a very good feature especially for users with great experience. For inexperienced users starting with IGEMS for the first time, all this settings sometimes can be confusing. To make the NC preparation even easier in AWJ-cutting we have added a new feature called Auto Technology. Page 7
8 Changes in the 2D-CAM module Image 16 You can switch between the User Technology and the Auto technology on the top of the dialog boxes for Auto and Single commands. The Auto technology can be used in all cases except for materials that need special piercings. IGEMS intension is to improve the functionality of the Auto technology in the future. Image 17 The general idea is to work with Dynamic Linear Piercing (Released in IGEMS R8). Fence in Sheet prepare One important task for the Sheet prepare command is to control the cutting order. To make it easier and more powerful to manually control the cut order we have added a new cut order algorithm called Fence. Image 18 The Fence option starts when you press the Apply button. Page 8
9 Changes in the 2D-CAM module Image 19 The cutting order will be in that order the Fence is intersecting with the parts. Image 20 IGEMS asks for the start point of the fence. (Point 1) Next Fence point (W=New start point, U=Increase radius, Y=Decrease radius) (Point 2) 1. The fence radius is pixel based, this means that you can control the fence radius relative to the parts by zooming in or out. 2. If you want to change the fence width, you can simply press U or Y. 3. The W will start a new fence. Parts in holes first Image 21 If the checkbox Parts in holes are activated then the cutting order are recalculated so that all parts located in holes are cut before the normal parts. Cutoff This is a new command in IGEMS. It can be used to cut off a sheet or to cut off parts. In previous versions this was possible by using a sequence of various commands. Image 22 The new Cutoff command has two modes depending if you want to cut off sheets or cut off parts. Page 9
10 Changes in the 2D-CAM module Image 23 Cut of sheets This feature can be used to make the scrap sheets easier to handle. It cuts large sheets of material into smaller pieces. Image 24 Use standard CAD commands and draw lines, arcs or polylines where the cutoff should be located. Start the command and select the cutoff objects. Image 25 This option has two settings. Image 26 These settings have following meaning. Page 10
11 Changes in the 2D-CAM module Image 27 Distance A must be larger than the Shortest cut to be used. The distance B (from the tool path to the part) is controlled by the value Distance to part. Cut of parts This feature can be used when you want to cut of parts. This kind of parts are probably not made by cutting, it is probably parts that already are manufactured. Do like follows: Create the part. Then make a line, arc or polyline object that describes the cutoff position. Image 28 Start the command and select the cutoff objects. Image 29 Page 11
12 Changes in the 2D-CAM module Image 30 The cutting starts at position A and stops at position B. The Jet will not turn off between the cut, it will move with the highest possible feed. This feed can be set in the machine setting dialog. Note! This feature needs modification of the postprocessor. Page 12
13 Bevel cut Chapter 4. Bevel cut Features in the Bevel cut commands are improved. It now works in different ways depending if machine type is set to waterjet or plasma. The feature has also got an Undo function. Note: The new functionality needs changes in the postprocessor! Loops on plasma cutting Cutting technology that creates heat need outside loops to get a good result. In previous versions of IGEMS the corner loops was added during the postprocessing. This could be a problem since the loop could damage other parts. IGEMS R9 now supports loops when adding the tool path. Image 31 The size of the loops is controlled from the input Loop radius in the dialog box. Image 32 The geometry of the lead is generated automatically (from a simple Line-Arc-Line geometry to and more advanced Arc-Arc-Line-Arc-Arc geometry). If the changes in cutting direction are less than 30 degrees, no loops will be added. Page 13
14 Bevel cut Image 33 Default size of the loop The default size of the loop can be set on each material. This is done in the material settings dialog. Image 34 Bevel with different angles It is now easier to add bevel cuts with different angles in one sequence. If you define several bevel cuts without closing the dialog box, you will get a question if previous toolpath should be connected with the new toolpath or not. Image 35 Page 14
15 Bevel cut If your answer is yes, then a loop is added. The changes of cutting angles will be done inside the loop. Image 36 Above you can see the result of 45 degree top bevel and 30 degree bottom bevel. Standoff in Plasma cutting Different material and different thickness require different standoff. The Standoff can have a big influence of the tool path. Image 37 On the picture above you can see that theoretical intersection point are moved with the distance of D when you move the Z-axis with the distance of A. The different standoff can be handled in different way on different machines. A. It can be handled completely by the CNC-controller. A common method is to use different kerf compensation to correct the D distance. B. Some CNC-controllers can correct the standoff by moving the tool in the Tool direction T. C. The standoff can also be handled by IGEMS. This result gives a toolpath with an offset from the theoretical intersection point. D. It is also possible to make a combination of these three methods above. The extra standoff is defined in the materials settings. Page 15
16 Bevel cut Image 38 Loops on WaterJet cutting In Water jet cutting technology we use inside loops. In previous versions of IGEMS the exact geometry of these loops were added during the postprocessing. Image 39 In IGEMS R9 the loops are generated when creating the toolpath. In the postprocessor the Loops are handled as special objects. This means that the postprocessors must be adjusted to be able to post files for IGEMS R9. Page 16
17 Bevel cut Image 40 The movement in corner loops will be as the picture above. Advance Bevel A new 3D-feature has been added to the Advance Bevel cutting command. This feature was added in IGEMS_R8 but never documented. Image 41 By using the 3D-Connect you can now add or delete connection lines in a 3D view. Image 42 Zoom, Pan and Rotate This command works in a different way from the rest of IGEMS. Page 17
18 Bevel cut Pan: Hold down the mouse wheel and move the mouse. Zoom: By rotate the mouse wheel. Rotate3D: By holding down the right button and move the mouse. Snap points You can add connection lines from bottom to top or opposite. Snap points on all endpoints and midpoints. You can also snap to closest point by select a snap point and then press Enter. Delete connections Image 43 By clicking on right mouse button you have options to delete and restore connections. Straight cuts in Advance Bevel To be able to make more complicated parts we have also added the functionality to add a 2D-cut within the Advance Bevel. Image 44 In the Advance Bevel you can define the top and bottom geometry. This information should not be enough if you want to cut a part as above. By using a polyline that describes a straight cut then this kind of geometries can be produced. To make this kind of part do like follows Page 18
19 Bevel cut Image 45 The Red object is the top geometry, the white objects is the bottom geometry. The straight cut has the color yellow. Define the parts in normal way then start the Bevel cut command. Image 46 The Cut object command allow you to follow a polyline, the cut will always be vertical. You can specify lead in, and side to cut. Multiple Advance Bevel Parts It is now possible to postprocess multiple Bevel parts in one CNC-file. Image 47 When you start the Advance Bevel post process Page 19
20 Bevel cut Image 48 Then you will have a question about zero points and a selection. If you want to control the cutting order between the parts, then select them by clicking. If the cutting order is not important then select the parts by a window. Image 49 The zero point and the cut order are displayed by temporary graphics. If you need to re-post then you must select zero point and cutting order again. Page 20
21 Organizer Chapter 5. Organizer It is now possible to search in what productions (nestings) a registered part are included in. Image 50 Example: The part above NIT-996 is already produced. The question is, in which production is it a member of. By double clicking on the part you can see following information. Image 51 On the Productions field list you can see in what production number the part has been manufactured. If the part is used in more than one production, then all productions will show in a list. Page 21
22 Organizer Image 52 If you go back to the main window and switch to Productions tab, you can see basic information about actual production. If you double click on the line you can see more information about the production. Image 53 This new feature makes it easier to trace old manufactured parts. November 11, 2009 Copyright IGEMS Software AB IGEMS is a registered trademark by IGEMS Software AB Sweden Page 22
Unit. Drawing Accurately OVERVIEW OBJECTIVES INTRODUCTION 8-1
8-1 Unit 8 Drawing Accurately OVERVIEW When you attempt to pick points on the screen, you may have difficulty locating an exact position without some type of help. Typing the point coordinates is one method.
More informationFAB Professional Sheet-metal design
Page 1 of 6 FAB Professional Sheet-metal design If you use AutoCAD to create your sheet - metal fabrication drawings, you are well aware of AutoCAD's limitations. To overcome these shortcomings, Striker
More informationSolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI
SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered
More informationThe following images illustrate the cutting paths in Gas and Plasma cutting:
CLCAM (common line cam) is a very useful APP for cutting operation like Gas Cutting, Plasma Cutting, Laser cutting and Wire Cut EDM. However the main application is Gas Cutting and Plasma cutting because
More informationLesson 6 2D Sketch Panel Tools
Lesson 6 2D Sketch Panel Tools Inventor s Sketch Tool Bar contains tools for creating the basic geometry to create features and parts. On the surface, the Geometry tools look fairly standard: line, circle,
More informationRevit Structure 2012 Basics:
SUPPLEMENTAL FILES ON CD Revit Structure 2012 Basics: Framing and Documentation Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Structural
More informationRevit Structure 2014 Basics
Revit Structure 2014 Basics Framing and Documentation Elise Moss Authorized Author SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit
More informationOmniWin 2015 Professional Designing and Nesting
OmniWin 2015 Professional Designing and Nesting OmniWin 2015 is a simple, clear and fast designing and nesting software, which adapts intelligently to your machine and your cutting needs. It takes over
More informationGstarCAD Mechanical 2015 Help
1 Chapter 1 GstarCAD Mechanical 2015 Introduction Abstract GstarCAD Mechanical 2015 drafting/design software, covers all fields of mechanical design. It supplies the latest standard parts library, symbols
More informationAutoCAD 2018 Fundamentals
Autodesk AutoCAD 2018 Fundamentals Elise Moss SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn more about
More informationAutodesk AutoCAD 2013 Fundamentals
Autodesk AutoCAD 2013 Fundamentals Elise Moss SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites to learn more
More informationDrawing with precision
Drawing with precision Welcome to Corel DESIGNER, a comprehensive vector-based drawing application for creating technical graphics. Precision is essential in creating technical graphics. This tutorial
More information1: INTRODUCTION TO AUTOCAD
AutoCAD syllabus 1: INTRODUCTION TO AUTOCAD Starting AutoCAD AutoCAD Screen Components Drawing Area Command Window Navigation bar Status bar Invoking Commands in AutoCAD Keyboard Ribbon Application Menu
More informationSPRINGFIELD TECHNICAL COMMUNITY COLLEGE ACADEMIC AFFAIRS
SPRINGFIELD TECHNICAL COMMUNITY COLLEGE ACADEMIC AFFAIRS Course Number: ARBT 125 Department: Architecture and Building Technology Course Title: Architectural CAD I Semester: Fall Year: 2013 Objectives/
More informationRevit Structure 2013 Basics
Revit Structure 2013 Basics Framing and Documentation Elise Moss Supplemental Files SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial
More informationAutoCAD 2020 Fundamentals
Autodesk AutoCAD 2020 Fundamentals ELISE MOSS Autodesk Certified Instructor SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationMasterCAM for Dresser Valet
MasterCAM for Dresser Valet Check to make sure the nethasp is working/turned on to network. Go to ALL APPs/Mastercam x8/nethasp After the computer reads the nethasp, these programs should show up. If not
More informationAutodesk AutoCAD 2012: Fundamentals. Elise Moss. autodesk authorized publisher SDC PUBLICATIONS
Autodesk AutoCAD 2012: Fundamentals Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Autodesk AutoCAD 2012: Fundamentals Lesson 3.0 Drawing
More informationBasic 2D drawing skills in AutoCAD 2017
Basic 2D drawing skills in AutoCAD 2017 This Tutorial is going to teach you the basic functions of AutoCAD and make you more efficient with the program. Follow all the steps so you can learn all the skills.
More informationCreating a 3D Assembly Drawing
C h a p t e r 17 Creating a 3D Assembly Drawing In this chapter, you will learn the following to World Class standards: 1. Making your first 3D Assembly Drawing 2. The XREF command 3. Making and Saving
More informationAssignment 5 CAD Mechanical Part 1
Assignment 5 CAD Mechanical Part 1 Objectives In this assignment you will apply polyline, offset, copy, move, and rotated dimension commands, as well as skills learned in earlier assignments. Getting Started
More informationChapter 7 Isometric Drawings
Chapter 7 Isometric Drawings In this assignment, we are going to look at creating isometric drawings with AutoCAD. These drawing appear to be three dimensional but they are not. An AutoCAD isometric drawing
More informationSiemens NX11 tutorials. The angled part
Siemens NX11 tutorials The angled part Adaptation to NX 11 from notes from a seminar Drive-to-trial organized by IBM and GDTech. This tutorial will help you design the mechanical presented in the figure
More informationChapter 2. Drawing Sketches for Solid Models. Learning Objectives
Chapter 2 Drawing Sketches for Solid Models Learning Objectives After completing this chapter, you will be able to: Start a new template file to draw sketches. Set up the sketching environment. Use various
More informationIntroduction to CATIA V5
Introduction to CATIA V5 Release 17 (A Hands-On Tutorial Approach) Kirstie Plantenberg University of Detroit Mercy SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower
More informationTutorial 3: Drawing Objects in AutoCAD 2011
Tutorial 3: Drawing Objects in AutoCAD 2011 Audience: Users new to AutoCAD Prerequisites: None Time to complete: 15 minutes In This Tutorial Please complete the lessons in this tutorial in order. The earlier
More informationPRODIM CT 3.0 MANUAL the complete solution
PRODIM CT 3.0 MANUAL the complete solution We measure it all! General information Copyright All rights reserved. Apart from the legally laid down exceptions, no part of this publication may be reproduced,
More informationMaking a Custom Symbol. Making a Custom Symbol in Chief Architect
TIP in Chief Architect INTRODUCTION Being able to make your own symbols in Chief Architect can be very useful. Not many users take the time to learn how to do this because they believe it to be a difficult
More informationAutoCAD 2D. Table of Contents. Lesson 1 Getting Started
AutoCAD 2D Lesson 1 Getting Started Pre-reqs/Technical Skills Basic computer use Expectations Read lesson material Implement steps in software while reading through lesson material Complete quiz on Blackboard
More informationCOMPUTER AIDED DRAFTING LAB (333) SMESTER 4
COMPUTER AIDED DRAFTING LAB (333) SMESTER 4 Introduction to Computer Aided Drafting: The method of preparing engineering drawing by using the computer software is known as Computer Aided Drafting (CAD).
More informationConquering the Rubicon
Autodesk Inventor R10 Fundamentals: Conquering the Rubicon Elise Moss SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com Schroff Development Corporation P.O. Box 1334
More informationDrawing and Assembling
Youth Explore Trades Skills Description In this activity the six sides of a die will be drawn and then assembled together. The intent is to understand how constraints are used to lock individual parts
More informationFigure 1: NC EDM menu
Click To See: How to Use Online Documents SURFCAM Online Documents 685)&$0Ã5HIHUHQFHÃ0DQXDO 6 :,5(('0 6.1 INTRODUCTION SURFCAM s Wire EDM mode is used to produce toolpaths for 2 Axis and 4 Axis EDM machines.
More informationRelative Coordinates
AutoCAD Essentials Most drawings are created using relative coordinates. This means that the next point is set from the last point drawn. The last point drawn is stored as temporary 0,0". AutoCAD uses
More informationDimensioning the Rectangular Problem
C h a p t e r 3 Dimensioning the Rectangular Problem In this chapter, you will learn the following to World Class standards: 1. Creating new layers in an AutoCAD drawing 2. Placing Centerlines on the drawing
More informationCAD Tutorial. CAD Detail Windows. In this tutorial you ll learn about: CAD Detail Windows Exploding and Modifying a CAD Block
CAD Tutorial In this tutorial you ll learn about: CAD Detail Windows Exploding and Modifying a CAD Block Creating a New CAD Block CAD Detail from View Creating a Plot Plan CAD Detail Windows CAD Details
More informationDrawing 8e CAD#11: View Tutorial 8e: Circles, Arcs, Ellipses, Rotate, Explode, & More Dimensions Objective: Design a wing of the Guggenheim Museum.
Page 1 of 6 Introduction The drawing used for this tutorial comes from Clark R. and M.Pause, "Precedents in Architecture", VNR 1985, page 135. Stephen Peter of the University of South Wales developed the
More informationConstructing a Wedge Die
1-(800) 877-2745 www.ashlar-vellum.com Using Graphite TM Copyright 2008 Ashlar Incorporated. All rights reserved. C6CAWD0809. Ashlar-Vellum Graphite This exercise introduces the third dimension. Discover
More informationTutorial Guide to AutoCAD 2015
Tutorial Guide to AutoCAD 2015 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationInventor-Parts-Tutorial By: Dor Ashur
Inventor-Parts-Tutorial By: Dor Ashur For Assignment: http://www.maelabs.ucsd.edu/mae3/assignments/cad/inventor_parts.pdf Open Autodesk Inventor: Start-> All Programs -> Autodesk -> Autodesk Inventor 2010
More informationMasterCAM for Sculpted Bench
MasterCAM for Sculpted Bench Check to make sure the nethasp is working/turned on to network. Go to ALL APPs/Mastercam x8/nethasp After the computer reads the nethasp, these programs should show up. If
More informationKerf Bent Clock Front Geometry in MasterCAM
Kerf Bent Clock Front Geometry in MasterCAM Check to make sure the nethasp is working/turned on to network. Go to ALL APPs/Mastercam x8/nethasp After the computer reads the nethasp, these programs should
More informationfor Solidworks TRAINING GUIDE LESSON-9-CAD
for Solidworks TRAINING GUIDE LESSON-9-CAD Mastercam for SolidWorks Training Guide Objectives You will create the geometry for SolidWorks-Lesson-9 using SolidWorks 3D CAD software. You will be working
More informationEngineering Technology
Engineering Technology Introduction to Parametric Modelling Engineering Technology 1 See Saw Exercise Part 1 Base Commands used New Part This lesson includes Sketching, Extruded Boss/Base, Hole Wizard,
More informationDimensioning the Bracket Problem
C h a p t e r 11 Dimensioning the Bracket Problem In this chapter, you will learn the following to World Class standards: 1. Dimensioning a Multiple View Drawing 2. Placing Center Marks on a Multiple View
More informationAn Introduction to Dimensioning Dimension Elements-
An Introduction to Dimensioning A precise drawing plotted to scale often does not convey enough information for builders to construct your design. Usually you add annotation showing object measurements
More information80 ` AutoCAD 2D I. Module 11. Object Snap PREPARED BY. IAT Curriculum Unit. February 2011
80 ` AutoCAD 2D I Object Snap PREPARED BY IAT Curriculum Unit February 2011 Institute of Applied Technology, 2011 Auto CAD Self-paced Learning Modules AutoCAD 2D Object Snap Learning Outcomes: When you
More informationArchitecture 2012 Fundamentals
Autodesk Revit Architecture 2012 Fundamentals Supplemental Files SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial files on enclosed CD Visit
More informationPrasanth. Lathe Machining
Lathe Machining Overview Conventions What's New? Getting Started Open the Part to Machine Create a Rough Turning Operation Replay the Toolpath Create a Groove Turning Operation Create Profile Finish Turning
More informationPrinciples and Applications of Microfluidic Devices AutoCAD Design Lab - COMSOL import ready
Principles and Applications of Microfluidic Devices AutoCAD Design Lab - COMSOL import ready Part I. Introduction AutoCAD is a computer drawing package that can allow you to define physical structures
More informationAlternatively, the solid section can be made with open line sketch and adding thickness by Thicken Sketch.
Sketcher All feature creation begins with two-dimensional drawing in the sketcher and then adding the third dimension in some way. The sketcher has many menus to help create various types of sketches.
More informationTutorial 1 getting started with the CNCSimulator Pro
CNCSimulator Blog Tutorial 1 getting started with the CNCSimulator Pro Made for Version 1.0.6.5 or later. The purpose of this tutorial is to learn the basic concepts of how to use the CNCSimulator Pro
More informationDigital Camera Exercise
Commands Used New Part This lesson includes Sketching, Extruded Boss/Base, Extruded Cut, Fillet, Chamfer and Text. Click File, New on the standard toolbar. Select Part from the New SolidWorks Document
More information1 Sketching. Introduction
1 Sketching Introduction Sketching is arguably one of the more difficult techniques to master in NX, but it is well-worth the effort. A single sketch can capture a tremendous amount of design intent, and
More informationAdvance Dimensioning and Base Feature Options
Chapter 4 Advance Dimensioning and Base Feature Options Learning Objectives After completing this chapter you will be able to: Dimension the sketch using the autodimension sketch tool. Dimension the sketch
More information06/17/02 Page 1 of 12
Understanding the Graphical User Interface When you start AutoCAD, the AutoCAD window opens. The window is your design work space. It contains elements that you use to create your designs and to receive
More information2809 CAD TRAINING: Part 1 Sketching and Making 3D Parts. Contents
Contents Getting Started... 2 Lesson 1:... 3 Lesson 2:... 13 Lesson 3:... 19 Lesson 4:... 23 Lesson 5:... 25 Final Project:... 28 Getting Started Get Autodesk Inventor Go to http://students.autodesk.com/
More information1. Create a 2D sketch 2. Create geometry in a sketch 3. Use constraints to position geometry 4. Use dimensions to set the size of geometry
2.1: Sketching Many features that you create in Fusion 360 start with a 2D sketch. In order to create intelligent and predictable designs, a good understanding of how to create sketches and how to apply
More informationTable of Contents. Lesson 1 Getting Started
NX Lesson 1 Getting Started Pre-reqs/Technical Skills Basic computer use Expectations Read lesson material Implement steps in software while reading through lesson material Complete quiz on Blackboard
More informationAn Introduction to Autodesk Inventor 2011 and AutoCAD Randy H. Shih SDC PUBLICATIONS. Schroff Development Corporation
An Introduction to Autodesk Inventor 2011 and AutoCAD 2011 Randy H. Shih SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation An Introduction to Autodesk Inventor 2011 and AutoCAD 2011
More informationDean Muccio AutoCAD Interior Designer. for the. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.
Dean Muccio AutoCAD 2020 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationIn this tutorial you will open a Dxf file and create the toolpath that cut the external of the part.
Tutorial 2 - Open Dxf file and create the outside Contour toolpath. In this tutorial you will open a Dxf file and create the toolpath that cut the external of the part. Caution: CNC machines are potentially
More informationIntroduction to Polylines and Multilines Chapter 15
Introduction to Polylines and Multilines Chapter 15 Sacramento City College EDT 310 Chapter 15 - Introduction to Polylines and Multilines 1 Polylines Chapter 15 - Introduction to Polylines and Multilines
More informationFlashCut CAD/CAM and CNC Control Software
FlashCut CAD/CAM and CNC Control Software Page ii FlashCut CAD/CAM and CNC Control Software Notices Revised April 10, 2017 Version 7.0.0.146 1997-2017 WPI, Inc., all rights reserved FlashCut CNC is a registered
More informationVersion 8 Tutorial
Version 8 Tutorial 800-989-4243 214-340-9436 support@vertigraph.com www.vertigraph.com 1 Table of Contents A. Overview... 4 B. About the SiteWorx/OS Window... 4 C. File Types Raster, Vector and PDF...
More informationConversational Programming. Alexsys Operator Manual
Conversational Programming Alexsys Operator Manual Alexsys Operator Manual 1. Overview ALEXSYS is a programming system for CNC machining centers. That combines features of CAD / CAM systems with typical
More informationDean Muccio. AutoCAD 2018 for the. Interior Designer. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.
Dean Muccio AutoCAD 2018 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationTutorial Guide to AutoCAD 2014
Tutorial Guide to AutoCAD 2014 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites
More informationAutoCAD Lab 1 Basics and Drawing Fundamentals. EGS 1007 Engineering Concepts and Methods
AutoCAD Lab 1 Basics and Drawing Fundamentals EGS 1007 Engineering Concepts and Methods Will the Computer Ever REPLACE Pencil and Paper Drawings? Maybe someday When a computer becomes as light, small,
More informationIsometric Drawings. Figure A 1
A Isometric Drawings ISOMETRIC BASICS Isometric drawings are a means of drawing an object in picture form for better clarifying the object s appearance. These types of drawings resemble a picture of an
More informationA Practical Guide to AutoCAD 2019
A Practical Guide to AutoCAD 2019 Tracy Chadwick and Rick Ellis Foreword written by Lynn Allen A CADapult Press Publication Copyright Copyright CADapult Press, Inc. 2018 All rights reserved. No part of
More informationTutorial Guide to AutoCAD 2013
Tutorial Guide to AutoCAD 2013 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S Schroff Development Corporation For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com
More informationDrawing a Living Room and Family Room Floorplan
Appendix C Drawing a Living Room and Family Room Floorplan In this chapter, you will learn the following to World Class standards: Draw a Living Room and Family Room Floorplan Draw the Walls and Stairs
More informationParametric Drawing Using Constraints
CHAPTER 10 Parametric Drawing Using Constraints PROJECT EXERCISE This project exercise provides point-by-point instructions for creating the objects shown in Figure P10 1. In this exercise, you will apply
More informationTools for Design. with VEX Robot Kit: Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS
Tools for Design with VEX Robot Kit: AutoCAD 2011 and Autodesk Inventor 2011 2D Drawing 3D Modeling Hand Sketching Randy H. Shih Oregon Institute of Technology INSIDE: SUPPLEMENTAL FILES ON CD SDC PUBLICATIONS
More informationPart 8: The Front Cover
Part 8: The Front Cover 4 Earpiece cuts and housing Lens cut and housing Microphone cut and housing The front cover is similar to the back cover in that it is a shelled protrusion with screw posts extruding
More informationCAD/CAM Lamp Project using 2D Design and the X-660 Laser Cutter
CAD/CAM Lamp Project using 2D Design and the X-660 Laser Cutter Paul Tate 2008 Booklet Version 2 Getting Started the preliminaries The Laser cutter which is going to cut out your acrylic bases and polypropylene
More informationAppendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION
Appendix B: Autocad Booklet YR 9 REFERENCE BOOKLET ORTHOGRAPHIC PROJECTION To load Autocad: AUTOCAD 2000 S DRAWING SCREEN Click the start button Click on Programs Click on technology Click Autocad 2000
More informationRoof Tutorial Wall Specification
Roof Tutorial The majority of Roof Tutorial describes some common roof styles that can be created using settings in the Wall Specification dialog and can be completed independent of the other tutorials.
More informationFUSION 360: SKETCHING FOR MAKERS
FUSION 360: SKETCHING FOR MAKERS LaDeana Dockery 2017 MAKEICT Wichita, KS 1 Table of Contents Interface... 1 File Operations... 1 Opening Existing Models... 1 Mouse Navigation... 1 Preferences... 2 Navigation
More informationAdvance Concrete. Tutorial
Advance Concrete Tutorial Table of contents About this tutorial... 9 How to use this guide... 10 Lesson 1: Creating a building grid... 11 Step 1: Create a default building grid... 11 Step 2: Set the distances
More informationIntroduction to Autodesk Inventor for F1 in Schools (Australian Version)
Introduction to Autodesk Inventor for F1 in Schools (Australian Version) F1 in Schools race car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital
More informationChapter 6 Title Blocks
Chapter 6 Title Blocks In previous exercises, every drawing started by creating a number of layers. This is time consuming and unnecessary. In this exercise, we will start a drawing by defining layers
More informationSheet Metal OverviewChapter1:
Sheet Metal OverviewChapter1: Chapter 1 This chapter describes the terminology, design methods, and fundamental tools used in the design of sheet metal parts. Building upon these foundational elements
More information8 Working Drawings in AutoCAD
8 Working Drawings in AutoCAD Most engineering designs consist of more than a single part. Usually there are a several or many parts that must fit and work together. When we are creating the drawings of
More informationCreate A Mug. Skills Learned. Settings Sketching 3-D Features. Revolve Offset Plane Sweep Fillet Decal* Offset Arc
Create A Mug Skills Learned Settings Sketching 3-D Features Slice Line Tool Offset Arc Revolve Offset Plane Sweep Fillet Decal* Tutorial: Creating A Custom Mug There are somethings in this world that have
More informationTutorial 4 - Open Dxf file and create multiple toolpaths (Contour, Pocket and Drill).
Tutorial 4 - Open Dxf file and create multiple toolpaths (Contour, Pocket and Drill). In this tutorial you will open a Dxf file and create the toolpath that cut the external of the part, another toolpath
More informationCREO.1 MODELING A BELT WHEEL
CREO.1 MODELING A BELT WHEEL Figure 1: A belt wheel modeled in this exercise. Learning Targets In this exercise you will learn: Using symmetry when sketching Using pattern to copy features Using RMB when
More informationNew Sketch Editing/Adding
New Sketch Editing/Adding 1. 2. 3. 4. 5. 6. 1. This button will bring the entire sketch to view in the window, which is the Default display. This is used to return to a view of the entire sketch after
More informationAutodesk. AutoCAD Architecture Fundamentals. Elise Moss SDC PUBLICATIONS. Schroff Development Corporation
Autodesk AutoCAD Architecture 2008 Fundamentals Elise Moss SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com Lesson 3 Floor Plans The floor plan is central to any
More informationIntroduction to IntelliCAD 6
Introduction to IntelliCAD 6 These notes explain the basic concepts and techniques for doing 2D line drawings, with dimensions, arranged onto sheets for printing, using the 6.4 or 6.6 versions of IntelliCAD
More informationAssignment 6 CAD Mechanical Part 1 Editing Tools Objectives
Assignment 6 CAD Mechanical Part 1 Editing Tools Objectives In this assignment you will apply the explode and rectangular array commands, as well as skills learned in earlier assignments. Getting Started
More informationFoamWorks Introduction. David Mrozinski 848 W. Borton Road Essexville, Michigan 48732
FoamWorks 4.0 Introduction Quick Start Registration Registration Menus Files Save a Cut Profile Load a Cut Profile Close Profile/G-code Restore Default Cut Profile Exit Setup Setup Parameters Generate
More informationAutodesk Inventor Module 17 Angles
Inventor Self-paced ecourse Autodesk Inventor Module 17 Angles Learning Outcomes When you have completed this module, you will be able to: 1 Describe drawing inclined lines, aligned and angular dimensions,
More informationMETBD 110 Hands-On 17 Dimensioning Sketches
METBD 110 Hands-On 17 Dimensioning Sketches Why: Recall, Pro/E can capture design intent through the use of geometric constraints, dimensional constraints, and parametric relations. Dimensional constraints
More informationLesson 4 Holes and Rounds
Lesson 4 Holes and Rounds 111 Figure 4.1 Breaker OBJECTIVES Sketch arcs in sections Create a straight hole through a part Complete a Sketched hole Understand the Hole Tool Use Info to extract information
More informationCOURSE: INTRODUCTION TO CAD GRADES: UNIT: Measurement
UNIT: Measurement - Students will demonstrate correctness in measuring using various scales and instruments. Demonstrate the various marks that make up a ruler including 1/16, 1/8, ¼ and ½. Assessment
More informationARC By default AutoCAD will draw an ARC through three selected points. Options can be set at the start and within the command.
DFTG 1309 Final Review Notes I. Draw commands: LINE (draws a series of lines) Valid input: Pick button Cartesian coordinates Absolute (2,3) Relative rectangular (@2,3) Relative polar (@ 2
More informationAutocad Basics 7/28/2009. Chapter 14 - Learning Objectives
Chapter 14 - Learning Objectives Autocad Basics Chapter 14 July 28, 2009 Use grips to stretch, copy, move, rotate, scale, and mirror objects. Edit objects using the Quick Properties panel and the Properties
More information