CURRICULUM ASSESSMENT CHECKLIST

Size: px
Start display at page:

Download "CURRICULUM ASSESSMENT CHECKLIST"

Transcription

1 CURRICULUM ASSESSMENT CHECKLIST Machinist - Level 1 Apprenticeship Manitoba prescribes time and content specific curriculum standards for technical training in the trade of Machinist. To assist accreditation applicants in meeting industry approved standards, this form is to be completed independently or in consultation with a member of the Program Standards Unit. The completed form should be signed and submitted as part of the original Accreditation Application Package or with supporting documentation when there are changes to the approved standards. Applicants should also be aware that their observance of these standards, as declared by completing the Curriculum Assessment Checklist, will be reviewed by Branch staff for the purpose of quality assurance. Example of a completed learning objective: Code Descriptors (Unit and objectives) Please specify reference(s) indicating where in your program this objective is covered, and the approximate time allocated to this content. Reference(s) Time A3.4 Identify communicating skills. When declaring where in the program the objective is covered using codes for reference, please identify what the code is in reference to and supply a document of outline. How much time is allotted for this objective? 5 Hours Please fill out the two columns on the right-hand side only, including time-weighting for each of the learning objectives (A1.1, A1.2 etc.). The completed form should be submitted for review to: Accreditation Unit Apprenticeship Manitoba Entrepreneurship, Training & Trade York Avenue Winnipeg MB R3C 0P8 School/College: AC#: Instructor(s): Rev. 10/01

2 Code A1 Descriptors (Unit and objectives) Safety in the Machine Shop Please specify reference(s) indicating where in your program this objective is covered, and the approximate time allocated to this content. Reference(s) Time A1.1 Identify the safety requirements as they apply to WHMIS. A1.2 Identifies and complies with machine shop (basic) safety. A1.3 Identify block and tackle fundamentals. A2 Professional Development A2.1 Identify work practices of the trade. A2.2 Describe and identify standards. A2.3 Identify lifelong learning and continuing education. A2.4 Identify careers in metalworking industry. A2.5 Describe history of machines Rev. 10/01

3 A2.6 Identify factories of the future. A3 Communication 25 hours A3.1 Describe team-building skills. A3.2 Describe problem-solving skills. A3.3 Describe collaborating skills. A3.4 Identify communicating skills. A4 Hand Tools, Power Tools and Benchwork 22 hours A4.1 Identify holding, striking and assembling tools. A4.2 Identify cutting hand tools. A4.3 Identify hand tools and safety procedures. A4.4 Identify taps and dies. A4.5 Identify hand reamers and hand broaching. A4.6 Use and maintain holding, striking and assembling tools. A4.7 Use and maintain cutting hand tools Rev. 10/01

4 A4.8 Use and maintain hand tools. A4.9 Use and maintain taps and dies. A4.10 Use and maintain hand reamers and hand broaching. A5 Drill Presses, Accessories and Drill Press Operations 15 hours A5.1 Identify drill press safety. A5.2 Identify drilling machines. A5.3 Identify drilling machine accessories. B1 Read and Interpret Drawings I 32 hours B1.1 Identify the procedures for proper care and handling of basic engineering drawings. B1.2 Describe the terms used in engineering drawings, their meaning and use. B1.3 Describe and interpret the markings used on engineering drawings. B1.4 Describe the procedures used to perform accurate reading and transfer of sizes. B1.5 Describe the procedures used to transfer information to the workpiece Rev. 10/01

5 B1.6 Locate and interpret welding symbols. C1 Trade Mathematics I 24 hours C1.1 Perform basic arithmetic. C1.2 Perform basic algebra. D1 Trade Science I 24 hours D1.1 Identify and describe basic metallurgy. D1.2 Identify and describe heat treatment. E1 Basic Measurement 15 hours E1.1 Identify basic measurement and applied mathematics. E1.2 Identify simple measuring tools and instruments. E1.3 Identify fixed gauges. E1.4 Identify precision measurement. E1.5 Perform basic measurement and applied mathematics. E1.6 Use fixed gauges. E1.7 Perform precision measurement Rev. 10/01

6 F1 Basic Layout Materials, Tools and Accessories F1.1 Describe the different types of layout tools, their applications and use. F1.2 Describe the different accessories for layout work, their applications and use. F1.3 Describe the datum or reference surfaces, their applications and advantages. F1.4 Describe the procedures used to perform accurate layout of work. F2 Basic or Semiprecision Layout 8 hours F2.1 Identify layout hole locations, slots, and radii. F2.2 Identify layout of a keyseat in a shaft. F2.3 Perform layout of hole locations, slots, and radii. F2.4 Perform layout of a keyseat in a shaft. G1 Types of Metal Saws G1.1 Identify power saw safety. G1.2 Identify saw types, attachments and applications. G1.3 Identify power cutting tools Rev. 10/01

7 H1 Engine Lathe Parts and Accessories 15 hours H1.1 Describe safety procedures related to lathe operation. H1.2 Identify precautions related to lathe operation. H1.3 Identify conventional lathes. H1.4 Describe lathe accessories and workholding devices, their purpose and applications. H2 Lathe Operations I 85 hours H2.1 Lathe operations. H2.2 Cutting speed, feed and depth of cut. H2.3 Physics of metal cutting. H2.4 Machinability of metals. H2.5 Cutting tools. H2.6 Operating conditions and tool life. H2.7 Carbide cutting tools specialty tools. H2.8 Cutting fluids. H2.9 Lathe centres Rev. 10/01

8 H2.10 Tapers and taper turning. H2.11 Threads and thread cutting. H2.12 Grinding lathe cutting tools. I1 Milling Operations I 15 hours I1.1 Identify milling machine safety. I1.2 Identify milling machines. I1.3 Describe the various types of cutters and their applications. I1.4 Identify cutting speed, feed and depth of cut. I1.5 Identify milling operations. I1.6 Identify milling machine setup. I1.7 Use and maintain milling operations. I1.8 Perform milling machine setup. K1 Offhand Grinding K1.1 Describe safety concerns when grinding. K1.2 Describe abrasives. K1.3 Describe the processes involved in grinding wheel manufacture. K1.4 Describe the factors involved in selection of a grinding wheel Rev. 10/01

9 K1.5 Read interpret grinding wheel codes. K1.6 Describe the types of grinding wheels, their characteristics and applications. K1.7 Describe the procedures for inspecting grinding wheels. K1.8 Identify the lapping method and procedures. K1.9 Describe honing techniques and procedures. Submitted by: (Signature) Date: For Office Use Only Date Received: Original Submission Date Sent for Review: Curriculum Update Reviewed by: Declaration verified by: Approved Denied Rev. 10/01

CURRICULUM ASSESSMENT CHECKLIST

CURRICULUM ASSESSMENT CHECKLIST CURRICULUM ASSESSMENT CHECKLIST Industrial Mechanic (Millwright) Level 1 Apprenticeship Manitoba prescribes time and content specific curriculum standards for technical training in the trades of Industrial

More information

Machinist NOA (1998) Subtask to Unit Comparison

Machinist NOA (1998) Subtask to Unit Comparison Machinist NOA (1998) Subtask to Unit Comparison NOA Subtask Task 1 Demonstrates safe working practices. 1.01 Recognizes potential health and safety hazards. A1 Safety in the Machine Shop 1.02 Recognizes

More information

Machinist A Guide to Course Content

Machinist A Guide to Course Content Machinist A Guide to Course Content Machinists work with metals; operate metal-cutting and shaping machinery. Training Requirements: To graduate from each level of the apprenticeship program, an apprentice

More information

Machinist NOA (2010) Subtask to Unit Comparison

Machinist NOA (2010) Subtask to Unit Comparison Machinist NOA (2010) Subtask to Unit Comparison NOA Subtask Task 1 Organizes work. 1.01 Interprets documentation. A16 Job Planning 1.02 Plans sequence of operations. A16 Job Planning 1.03 Maintains safe

More information

Machinist Level 4 Rev. December 12, 2012

Machinist Level 4 Rev. December 12, 2012 Machinist Level 4 Machinist Unit: A14 Reconditioning Level: Four Duration: 12 hours Theory: Practical: 12 hours 0 hours Overview: This unit of instruction is designed to introduce knowledge of the procedures

More information

Work Experience Form Machinist

Work Experience Form Machinist 2013 - National Occupational Analysis (NOA) Work Experience Form Machinist 1-877-978-7233 www.manitoba.ca/tradecareers Personal Information (please print) Legal First Name Middle Initial Legal Last Name

More information

COMPETENCY ANALYSIS PROFILE GENERAL MACHINIST 429A. (All unshaded skill sets must be demonstrated/completed)

COMPETENCY ANALYSIS PROFILE GENERAL MACHINIST 429A. (All unshaded skill sets must be demonstrated/completed) COMPETENCY ANALYSIS PROFILE GENERAL MACHINIST 429A (All unshaded skill sets must be demonstrated/completed) SKILL SETS SKILLS PROTECT SELF AND OTHERS Identify health and safety hazards. Wear, adjust, and

More information

Total Related Training Instruction (RTI) Hours: 144

Total Related Training Instruction (RTI) Hours: 144 Total Related Training (RTI) Hours: 144 Learning Unit Unit 1: Benchwork and Layout Layout tools Tapping Reaming Filing Engraving Stamping Unit 2: Cutting and Drilling Cutting Operations Drilling Operations

More information

JOB QUALIFICATION STANDARD (JQS)

JOB QUALIFICATION STANDARD (JQS) Occupation: Work Process: Maintenance Mechanic Machine Shop Practical Hours: 250 hrs. JOB QUALIFICATION STANDARD (JQS) DOL Standard: Manual Machining Fundamentals: Apply a working knowledge of metal removal

More information

Tool and Die Maker Level 1

Tool and Die Maker Level 1 Tool and Die Maker Level 1 Tool and Die Maker Unit: A1 Safety in the Machine Shop Level: One Duration: 7 hours Theory: Practical: 7 hours 0 hours Overview: This unit of instruction is designed to introduce

More information

COMPETENCY ANALYSIS PROFILE Tool and Die Maker 430A (All unshaded skill sets must be demonstrated/completed)

COMPETENCY ANALYSIS PROFILE Tool and Die Maker 430A (All unshaded skill sets must be demonstrated/completed) COMPETENCY ANALYSIS PROFILE Tool and Die Maker 430A (All unshaded skill sets must be demonstrated/completed) SKILL SETS SKILLS PROTECT SELF AND OTHERS Identify health and safety hazards. Wear, adjust,

More information

COMPETENCY ANALYSIS PROFILE MOULD MAKER 431A (All unshaded skill sets must be demonstrated/completed)

COMPETENCY ANALYSIS PROFILE MOULD MAKER 431A (All unshaded skill sets must be demonstrated/completed) COMPETENCY ANALYSIS PROFILE MOULD MAKER 431A (All unshaded skill sets must be demonstrated/completed) SKILL SETS SKILLS PROTECT SELF AND OTHERS Identify health and safety hazards in the workplace. Wear,

More information

Job Ready Assessment Blueprint. Precision Machining. Test Code: 4052 / Version: 01. Copyright All Rights Reserved.

Job Ready Assessment Blueprint. Precision Machining. Test Code: 4052 / Version: 01. Copyright All Rights Reserved. Job Ready Assessment Blueprint Precision Machining Test Code: 4052 / Version: 01 Copyright 2009. All Rights Reserved. General Assessment Information Blueprint Contents General Assessment Information Written

More information

Entry Level Assessment Blueprint Precision Machining

Entry Level Assessment Blueprint Precision Machining Blueprint Precision Machining Test Code: 4152 / Version: 01 Specific Competencies and Skills Tested in this Assessment: Organization and Shop Practices Demonstrate safe work habits and operating procedures

More information

ACCREDITATION FACILITY AUDIT CHECKLIST

ACCREDITATION FACILITY AUDIT CHECKLIST ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Machinist AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students

More information

APPENDIX A TOOLMAKER D.O.T. CODE O*NET CODE As Revised for MACNY, The Manufacturers Association

APPENDIX A TOOLMAKER D.O.T. CODE O*NET CODE As Revised for MACNY, The Manufacturers Association STATE OF NEW YORK DEPARTMENT OF LABOR APPENDIX A TOOLMAKER D.O.T. CODE 601.280-042 O*NET CODE 51-4111.00 As Revised for MACNY, The Manufacturers Association This training outline is a minimum standard

More information

Machine Tool Technology/Machinist CIP Task Grid Secondary Competency Task List

Machine Tool Technology/Machinist CIP Task Grid Secondary Competency Task List 1 100 ORIENTATION / SAFETY 101 Describe the Occupational Safety and Health Administration (OSHA) and its role in the machining industry. 2 2 2 1 0.5 102 Identify & explain safety equipment and procedures.

More information

JOB QUALIFICATION STANDARD (JQS)

JOB QUALIFICATION STANDARD (JQS) Occupation: Work Process: MACHINIST (CNC) CNC Setup Practical Hours: 2000 hrs. DOL Standard: CNC Setup: Apply a working knowledge in the setup of Computer Numerical Controls (CNC) machines that execute

More information

Perkins Statewide Articulation Agreement. Documentation item: Secondary Competency Task List Coversheet

Perkins Statewide Articulation Agreement. Documentation item: Secondary Competency Task List Coversheet Perkins Statewide Articulation Agreement Documentation item: Secondary Task List Coversheet The Secondary School agrees to: A. Implement the approved PDE Program(s) of Study. B. Provide assessment of student

More information

NOVA SCOTIA APPRENTICESHIP CURRICULUM STANDARD

NOVA SCOTIA APPRENTICESHIP CURRICULUM STANDARD NOVA SCOTIA APPRENTICESHIP CURRICULUM STANDARD for the Occupation of Based on the Interprovincial Program Guide (pg. 12 for Program Structure) Machinist New Levels 1, 2, 3 & 4 in September 2014 See Page

More information

Interim Logbook TOOL & DIE MAKER

Interim Logbook TOOL & DIE MAKER Interim Logbook TOOL & DIE MAKER Department of Advanced Education and Skills Apprenticeship and Trades Certification Division Note to Apprenticeship Applicants This form can only be used to record hours

More information

Pennsylvania College of Technology One College Ave. Williamsport, PA Student ID Number:

Pennsylvania College of Technology One College Ave. Williamsport, PA Student ID Number: Pennsylvania College of Technology One College Ave. Williamsport, PA. 17701-5799 Name: School: Student ID Number: Date: COMPETENCY ASSESSMENT FOR MACHINIST GENERAL (MG) MACHINE TOOL TECHNOLOGY (MY) AUTOMATED

More information

Tool and Die Maker Level 2

Tool and Die Maker Level 2 Level 2 B2 Read and Interpret Drawings II Duration: 32 hours 32 hours 0 hours This unit of instruction introduces the Tool and Die Maker Apprentice with the knowledge and skills necessary to read and interpret

More information

Machinist On-the-Job Training Guide

Machinist On-the-Job Training Guide Machinist On-the-Job Training Guide Machinists work with metals and other materials and operate lathes, milling machines and other tools to produce shapes to a required finish and size. Training Requirements:

More information

POS Perkins Statewide Articulation Agreement Documentation Coversheet

POS Perkins Statewide Articulation Agreement Documentation Coversheet POS Perkins Statewide Articulation Agreement Documentation Coversheet Student Name: Secondary School Name: Secondary School Address: CTE Program of Study: CIP # CIP Program Name Grade 9 1. CAREER AND TECHNICAL

More information

July 2001 Florida Department of Education CLUSTER CURRICULUM FRAMEWORK. Program Title: Machining Occupational Area: Industrial Education

July 2001 Florida Department of Education CLUSTER CURRICULUM FRAMEWORK. Program Title: Machining Occupational Area: Industrial Education July 2001 Florida Department of Education CLUSTER CURRICULUM FRAMEWORK Program Title: Machining Occupational Area: Industrial Education Components: One Core, Four Occupational Completion Points Secondary

More information

Machine Tool Technology/Machinist CIP Task Grid

Machine Tool Technology/Machinist CIP Task Grid 1 100 ORIENTATION / SAFETY 101 Describe the Occupational Safety and Health Administration (OSHA) and its role in the machining industry. 102 Identify & explain safety equipment and procedures. 103 Identify

More information

Course Title: Advanced Manufacturing Technology MACH 110 Instructor: Conrad Mercurius Contact Information: Conrad.Mercurius@raritanval.edu Course Meeting Dates, Days, and Times: Total # hours: 250 Course

More information

Name: Machine Tool Technology ( )

Name: Machine Tool Technology ( ) Name: Machine Tool Technology (58.0501) Directions: Evaluate the student by checking the appropriate number to indicate the degree of competency. Rating Scale (0-6): 0 No Exposure no experience/knowledge

More information

MACHINIST TECHNICIAN - LATHE (582)

MACHINIST TECHNICIAN - LATHE (582) DESCRIPTION Students will demonstrate technical knowledge and skills to plan, manufacture, assemble, test products, and modify metal parts using machine shop and CNC processes in support of other manufacturing,

More information

Annual Report for Assessment of Outcomes Machine Manufacturing Technology (MMT) Program

Annual Report for Assessment of Outcomes Machine Manufacturing Technology (MMT) Program Annual Report for Assessment of Outcomes 2011-2012 Machine Manufacturing Technology (MMT) Program 1. Describe changes that have been implemented towards improving students attainment of outcomes that resulted

More information

Machine Tool Technology/Machinist CIP Task Grid

Machine Tool Technology/Machinist CIP Task Grid 1 Secondary Task List 100 ORIENTATION / SAFETY 101 Describe the Occupational Safety and Health Administration (OSHA) and its role in the machoning industry. 102 Identify & explain safety equipment and

More information

Revised April Unit/Standard Number. High School Graduation Years 2016, 2017 and 2018

Revised April Unit/Standard Number. High School Graduation Years 2016, 2017 and 2018 Unit/Standard Number High School Graduation Years 2016, 2017 and 2018 Machine Tool Technology/Machinist CIP 48.0501 Task Grid Secondary Competency Task List 100 ORIENTATION / SAFETY 101 Describe the Occupational

More information

Duties and Standards. for. Screw Machining--Level III

Duties and Standards. for. Screw Machining--Level III Duties and Standards for Screw Machining--Level III Single-and Multiple-Spindle Automatic Bar and Chucking Machines Approved by The National Institute for Metalworking Skills, Inc. October 1996 Prepared

More information

Hand Tools and Basic Layout

Hand Tools and Basic Layout MCH-0100 Hand Tools and Basic Layout NOA Reference: The material covered satisfies in whole or in part, the requirements of National Occupational Analysis sub-tasks 1.08, 4.04, 4.05, 42.01-42.12. Description:

More information

Strands & Standards MACHINING 2

Strands & Standards MACHINING 2 Strands & Standards MACHINING 2 COURSE DESCRIPTION This course is the second in a sequence that will use technical knowledge and skills to plan and manufacture projects using machine lathes, mills, drill

More information

Computer Numerical Control (CNC) Machinist POA (2004) Subtask to Unit Comparison

Computer Numerical Control (CNC) Machinist POA (2004) Subtask to Unit Comparison Computer Numerical Control (CNC) Machinist POA (2004) Subtask to Unit Comparison NOA Subtask Task 1 Participates in workplace health and safety practices. 1.01 Maintains a safe workplace environment. 1.02

More information

UNIT TO COURSE COMPARISON (UCC) FORM. Carpenter Level 1

UNIT TO COURSE COMPARISON (UCC) FORM. Carpenter Level 1 UNIT TO COURSE COMPARISON (UCC) FORM Carpenter Level 1 The Apprenticeship and Certification Board prescribes time and content specific curriculum standards for technical training. To assist training providers

More information

SAN DIEGO COMMUNITY COLLEGE DISTRICT CITY COLLEGE ASSOCIATE DEGREE COURSE OUTLINE

SAN DIEGO COMMUNITY COLLEGE DISTRICT CITY COLLEGE ASSOCIATE DEGREE COURSE OUTLINE SAN DIEGO COMMUNITY COLLEGE DISTRICT CITY COLLEGE ASSOCIATE DEGREE COURSE OUTLINE SECTION I SUBJECT AREA AND COURSE NUMBER: Machine Technology 140 COURSE TITLE: Machine Technology UNITS: 4.00 Grade O nly

More information

Interprovincial Program Guide. Machinist. Human Resources and Skills Development Canada. Ressources humaines et Développement des compétences Canada

Interprovincial Program Guide. Machinist. Human Resources and Skills Development Canada. Ressources humaines et Développement des compétences Canada Interprovincial Program Guide 2012 Machinist Human Resources and Skills Development Canada Ressources humaines et Développement des compétences Canada Interprovincial Program Guide Machinist 2012 Trades

More information

The National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level I NIMS/ANSI

The National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level I NIMS/ANSI The National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level I NIMS/ANSI 101-2001 Developed By: Copyright July 1997-Revised September 2001 Distributed by: The National

More information

Metropolitan Community College COURSE OUTLINE FORM LEC: 9 LAB:

Metropolitan Community College COURSE OUTLINE FORM LEC: 9 LAB: Course Title: Machine Tool II Course Prefix & No.: PRMA 1402 LEC: 9 LAB: 0 Credit Hours: 9 COURSE DESCRIPTION: Students construct basic machine projects using various pieces of shop equipment including

More information

MACHINIST TECHNICIAN - LATHE (582)

MACHINIST TECHNICIAN - LATHE (582) DESCRIPTION Students will demonstrate technical knowledge and skills to plan, manufacture, assemble, test products, and modify metal parts using machine shop and CNC processes in support of other manufacturing,

More information

SEMET19 Producing toolroom components using NC/CNC turning machines

SEMET19 Producing toolroom components using NC/CNC turning machines Producing toolroom components using NC/CNC turning machines Overview This unit identifies the competences you need to prepare, set up and run numerically controlled (NC) turning machines, computer numerically

More information

Roll No. :.. Invigilator s Signature :.. CS/B.Tech (ME)/SEM-5/ME-504/ TECHNOLOGY OF MACHINING. Time Allotted : 3 Hours Full Marks : 70

Roll No. :.. Invigilator s Signature :.. CS/B.Tech (ME)/SEM-5/ME-504/ TECHNOLOGY OF MACHINING. Time Allotted : 3 Hours Full Marks : 70 Name : Roll No. :.. Invigilator s Signature :.. CS/B.Tech (ME)/SEM-5/ME-504/2009-10 2009 TECHNOLOGY OF MACHINING Time Allotted : 3 Hours Full Marks : 70 The figures in the margin indicate full marks. Candidates

More information

NIMS Machining Level I Preparation Guide. Job Planning, Benchwork, and Layout

NIMS Machining Level I Preparation Guide. Job Planning, Benchwork, and Layout NIMS Machining Level I Preparation Guide Job Planning, Benchwork, and Layout Table of Contents Overview pages 2 5 Introduction page 2 Who Wrote the Questions page 2 How to Prepare for the Credentialing

More information

Machining I DESCRIPTION. EXAM INFORMATION Items

Machining I DESCRIPTION. EXAM INFORMATION Items EXAM INFORMATION Items 50 Points 62 Prerequisites NONE Grade Level 10-12 Course Length ONE SEMESTER DESCRIPTION Students will demonstrate technical knowledge and skills to plan, manufacture, assemble,

More information

DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK ME6402 MANUFACTURING TECHNOLOGY II UNIT I PART A 1. List the various metal removal processes? 2. How chip formation occurs in metal cutting? 3. What is

More information

Jig and Fixture Design. Chapter 1: Types and Functions of Jigs and Fixtures

Jig and Fixture Design. Chapter 1: Types and Functions of Jigs and Fixtures Jig and Fixture Design Chapter 1: Types and Functions of Jigs and Fixtures Purpose of Tool Design Objectives: Provide simple, easy-to-operate tools for maximum efficiency Reduce manufacturing expenses

More information

Apprenticeship Training Standard. Schedule of Training. Mould or Die Finisher. Trade Code: 277M. Development Date: 2003

Apprenticeship Training Standard. Schedule of Training. Mould or Die Finisher. Trade Code: 277M. Development Date: 2003 Apprenticeship Training Standard Schedule of Training Mould or Die Finisher Trade Code: 277M Development Date: 2003 This document is the property of the apprentice named inside and represents the official

More information

Machining components using vertical boring machines

Machining components using vertical boring machines Unit 319 Machining components using vertical boring machines UAN: Level: 3 Credit value: 77 GLH: 161 Relationship to NOS: Assessment requirements specified by a sector or regulatory body: Aim: Y/600/5430

More information

Setting vertical boring machines for production

Setting vertical boring machines for production Unit 318 Setting vertical boring machines for production UAN: Level: 3 Credit value: 91 GLH: 210 Relationship to NOS: Assessment requirements specified by a sector or regulatory body: Aim: F/600/5423 This

More information

The National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level II NIMS/ANSI

The National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level II NIMS/ANSI The National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level II NIMS/ANSI 101-2001 Developed By: Copyright July 1997-Revised September 2001 Distributed by: The National

More information

Curriculum for Mechanical Sub Overseer

Curriculum for Mechanical Sub Overseer Curriculum for Mechanical Sub Overseer Council for Technical Education and Vocational Training Curriculum Development Division Sanothimi, Bhaktapur 2005 Course Structure of 15 Month Curriculum of Mechanical

More information

VALLIAMMAI ENGINEERING COLLEGE DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK ME6402 MANUFACTURING TECHNOLOGY II UNIT-I PART A 1. List the various metal removal processes? (BT1) 2. Explain how chip

More information

Apprenticeship Training Standard. Schedule of Training. Draftsperson Mechanical. Trade Code: 614A

Apprenticeship Training Standard. Schedule of Training. Draftsperson Mechanical. Trade Code: 614A Apprenticeship Training Standard Schedule of Training Draftsperson Mechanical Trade Code: 614A Development Date: March 2000 NOTICE OF COLLECTION OF PERSONAL INFORMATION 1. At any time during your apprenticeship

More information

Tech 046: Machine Operation and Management. Course Syllabus

Tech 046: Machine Operation and Management. Course Syllabus SAN JOSE STATE UNIVERSITY Department of Aviation and Technology Tech 046: Machine Operation and Management Course Syllabus Semester and Year: Fall, 2013 Course Sections: 1 & 11 Course Code: S1: 43304 Class

More information

The National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level III NIMS/ANSI

The National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level III NIMS/ANSI The National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level III NIMS/ANSI 101-2001 Developed By: Copyright July 1997-Revised September 2001 Distributed by: The

More information

SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE

SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO Sault College COURSE OUTLINE COURSE TITLE: CODE NO. : SEMESTER: 2 PROGRAM: AVIATION MACHINING AUTHOR: ROBERT ZUCCATO TIM CANDIDO Bob.zuccato@saultc.on.ca

More information

Competency, knowledge and skill areas often offer varying definitions. For purposes of this toolkit, NIMS defines them in the following manner:

Competency, knowledge and skill areas often offer varying definitions. For purposes of this toolkit, NIMS defines them in the following manner: Toolkit Roadmap Title of report Credential name Narrative description of credential DEFINITION OF TERMS Competency, knowledge and skill areas often offer varying definitions. For purposes of this toolkit,

More information

Big Sandy Community and Technical College. Course Syllabus

Big Sandy Community and Technical College. Course Syllabus Big Sandy Community and Technical College Course Syllabus PS Number: 81212 Semester: Spring Year: 2017 Faculty Name: Charles K. Moore Title: Associate Professor Course Prefix and Number: IMT-116 Course

More information

TOOL, JIG AND DIE MAKER

TOOL, JIG AND DIE MAKER MERSETA - TRAINING SCHEDULE PAGE 1 TRADE: TOOL, JIG AND DIE MAKER INDUCTION ID1 Recall applicable sections of the Manpower Training Act (No 56, 1981) with special reference to discipline and legal responsibilities.

More information

STATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES

STATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES STATEWIDE CAREER/TECHNICAL EDUCATION COURSE ARTICULATION REVIEW MINUTES Articulation Agreement Identifier: _INT 153 (2005-1) Instruction version number (e.g.; INT 100 (2007-1)). Identifier is the postsecondary

More information

TIMTOS 2017 EXHIBITS PROFILE

TIMTOS 2017 EXHIBITS PROFILE TIMTOS 2017 EXHIBITS PROFILE Product Code Product Name METAL CUTTING MACHINE TOOL Lathes and Turning Machines 160101 Lathes, Swiss Type 160502 Bench Lathes 160503 High Speed Lathes 160504 Automatic Lathes

More information

Performance Standards Benchwork

Performance Standards Benchwork Performance Standards Benchwork Materials A block of cold rolled mild steel 1.00 x 2.00 x 3.00 milled or filed to length (see Duties and Standards for Machining Skills Level I, September 2001) or as specified

More information

Manufacturing Technician Training

Manufacturing Technician Training Mike McKinney / Jefferson College I. Objective: Developed to meet the industry demands and provide a six-week certification program to fast track individuals to secure a position in the manufacturing industry

More information

Chapter 23: Machining Processes: Turning and Hole Making

Chapter 23: Machining Processes: Turning and Hole Making Manufacturing Engineering Technology in SI Units, 6 th Edition Chapter 23: Machining Processes: Turning and Hole Making Chapter Outline 1. Introduction 2. The Turning Process 3. Lathes and Lathe Operations

More information

Travis Bishop. Submitted to: Dr. John Davis. Date: 3 December Course: ETME 310 Section: 004. Lab Topic: Milling Project (Vise)

Travis Bishop. Submitted to: Dr. John Davis. Date: 3 December Course: ETME 310 Section: 004. Lab Topic: Milling Project (Vise) Travis Bishop Submitted to: Dr. John Davis Date: 3 December 2012 Course: ETME 310 Section: 004 Lab Topic: Milling Project (Vise) Introduction: Purpose of Experiment: This experiment was conducted to teach

More information

MACHINE SHOP (420) Machine Shop (420)

MACHINE SHOP (420) Machine Shop (420) Machine Shop (420) 2019-2020 1 MACHINE SHOP (420) 420-120. Machine Tool/Fabrication. (2 Credits) This course is designed to provide fabrication students with knowledge and applications of machine tool

More information

Dr Ghassan Al-Kindi - MECH2118 Lecture 9

Dr Ghassan Al-Kindi - MECH2118 Lecture 9 Dr Ghassan Al-Kindi - MECH2118 Lecture 9 Machining A material removal process in which a sharp cutting tool is used to mechanically cut away material so that the desired part geometry remains Most common

More information

SEMAE3218 Setting CNC turning machines for production of aircraft components

SEMAE3218 Setting CNC turning machines for production of aircraft components Setting CNC turning machines for production of aircraft components Overview This standard identifies the competences you need to prepare and set up Computer Numerical Control (CNC) machines or CNC machining

More information

CHAPTER 53 MACHINERY REPAIRMAN (MR) NAVPERS E CH-65

CHAPTER 53 MACHINERY REPAIRMAN (MR) NAVPERS E CH-65 CHAPTER 53 MACHINERY REPAIRMAN (MR) NAVPERS 18068-53E CH-65 Updated: January 2016 SCOPE OF RATING GENERAL INFORMATION MACHINERY REPAIR APPRENTICE FABRICATIONS AND MANUFACTURING MACHINE OPERATIONS PRE-MANUFACTURING

More information

Preparing and using CNC Machining Centres F/508/4727

Preparing and using CNC Machining Centres F/508/4727 Unit Title Ofqual unit reference number (code) Organisation Reference Preparing and using CNC Machining Centres F/508/4727 QU051501 Unit Level Level 2 Unit Sub Level None GLH 64 Unit Credit Value 14 Sector

More information

C L A S S C A T A L O G

C L A S S C A T A L O G C L A S S C A T A L O G Summary of Industries Served Machining Knowledge is confidence. Workholding Manual Machining Metal Cutting Abrasives CNC CNC Controls: Haas CNC Controls: GE Fanuc CNC Controls:

More information

Preparing and using CNC machining centres

Preparing and using CNC machining centres Unit 017 Preparing and using CNC machining centres Level: 2 Credit value: 14 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to cover

More information

Trade of Toolmaking Module 2: Turning Unit 3: Drilling, Reaming & Tapping Phase 2

Trade of Toolmaking Module 2: Turning Unit 3: Drilling, Reaming & Tapping Phase 2 Trade of Toolmaking Module 2: Turning Unit 3: Drilling, Reaming & Tapping Phase 2 Published by SOLAS 2014 Unit 3 1 Table of Contents Document Release History... 3 Unit Objective... 4 Introduction... 4

More information

Session 10 Dimensions, Fits and Tolerances for Assembly

Session 10 Dimensions, Fits and Tolerances for Assembly Session 10 Dimensions, Fits and Tolerances for Assembly Lecture delivered by Prof. M. N. Sudhindra Kumar Professor MSRSAS-Bangalore 1 Variations in Production It is necessary that the dimensions, shape

More information

Typical Parts Made with These Processes

Typical Parts Made with These Processes Turning Typical Parts Made with These Processes Machine Components Engine Blocks and Heads Parts with Complex Shapes Parts with Close Tolerances Externally and Internally Threaded Parts Products and Parts

More information

UNIT TO COURSE COMPARISON (UCC) FORM. Welder Level 1

UNIT TO COURSE COMPARISON (UCC) FORM. Welder Level 1 UNIT TO COURSE COMPARISON (UCC) FORM Welder Level 1 The Apprenticeship and Certification Board prescribes time and content specific curriculum standards for technical training. To assist training providers

More information

UNIT TO COURSE COMPARISON (UCC) FORM ESTHETICIAN GRADE 10 INTRODUCTION TO ESTHETICS

UNIT TO COURSE COMPARISON (UCC) FORM ESTHETICIAN GRADE 10 INTRODUCTION TO ESTHETICS UNIT TO COURSE COMPARISON (UCC) FORM ESTHETICIAN GRADE 10 INTRODUCTION TO ESTHETICS The Apprenticeship and Certification Board prescribes time and content specific curriculum standards for technical training.

More information

PROGRAM OUTLINE. Tool and Die Maker

PROGRAM OUTLINE. Tool and Die Maker PROGRAM OUTLINE Tool and Die Maker The latest version of this document is available in PDF format on the ITA website www.itabc.ca To order printed copies of Program Outlines or learning resources (where

More information

SYLLABUS. Apprenticeship Training Scheme

SYLLABUS. Apprenticeship Training Scheme SYLLABUS For the trade of JIGS AND FIXTURE MAKER UNDER Apprenticeship Training Scheme Government of India Ministry of Labour & Employment Directorate General of Employment & Training New Delhi-110001 GENERAL

More information

CNC Lathe Production Technician

CNC Lathe Production Technician Brief Program Description The CNC Lathe Production Technician program is a 9 week online program designed to help students gain the skills and knowledge required for work as entry-level CNC lathe production

More information

Machinist--Cert Students apply industry standard safety practices and specific safety requirements for different machining operations.

Machinist--Cert Students apply industry standard safety practices and specific safety requirements for different machining operations. MTT Date: 09/13/2018 TECHNOLOGY MTT Machine Tool Technology--AA Students apply industry standard safety practices and specific safety requirements for different machining operations. Students calculate

More information

061 MECHANICAL ENGINEERING CRAFT PRACTICE

061 MECHANICAL ENGINEERING CRAFT PRACTICE 061 MECHANICAL ENGINEERING CRAFT PRACTICE EXAMINATION STRUCTURE The examination for this syllabus wills cover the underlisted two major areas of groupings and 193 Building/Engineering Drawing as the related

More information

Preparing and using milling machines. Outcome one

Preparing and using milling machines. Outcome one 006 UNIT 012 Preparing and using milling machines Learning outcomes 1 2 Know how to prepare and use milling machines Performance evidence must be the main form of evidence gathered. Candidates are required

More information

Syllabus: Basic Manual Machining

Syllabus: Basic Manual Machining Syllabus: Basic Manual Machining Subject Code: 172302 Course Number: GM9006 CIP Code: 48.0501 SOC Code: 51-4041 C-TEC of Licking County 150 Price Road Newark, Ohio 43055 Instructor: Bob Bronkar Instructor

More information

CREDITS: 6-8/year (may count for math credits; inquire with your high school)

CREDITS: 6-8/year (may count for math credits; inquire with your high school) MACHINING TECHNOLOGY Gregory W. Carmack Instructor 1005 Franklin Valparaiso, IN. 46383 219-531-3170 Fx 219-531-3173 COURSE SYLLABUS CREDITS: 6-8/year (may count for math credits; inquire with your high

More information

24-27 MAY 2017 PUTRA WORLD TRADE CENTRE. THE 23 rd ASEAN INTERNATIONAL MACHINE TOOLS AND METALWORKING TECHNOLOGY EXHIBITION KUALA LUMPUR, MALAYSIA

24-27 MAY 2017 PUTRA WORLD TRADE CENTRE. THE 23 rd ASEAN INTERNATIONAL MACHINE TOOLS AND METALWORKING TECHNOLOGY EXHIBITION KUALA LUMPUR, MALAYSIA 24-27 MAY 2017 PUTRA WORLD TRADE CENTRE KUALA LUMPUR, MALAYSIA THE 23 rd ASEAN INTERNATIONAL MACHINE TOOLS AND METALWORKING TECHNOLOGY EXHIBITION EXHIBITORS PROFILE MACHINE TOOLS Boring, Broaching, CNC

More information

MACHINIST (3 Month Course) Revised May, 2009

MACHINIST (3 Month Course) Revised May, 2009 GOVERNMENT OF THE PUNJAB TECHNICAL EDUCATION & VOCATIONAL TRAINING AUTHORITY CURRICULUM FOR CURRICULUM FOR MACHINIST (3 Month Course) Revised May, 2009 CURRICULUM SECTION ACADEMICS DEPARTMENT 96-H, GULBERG-II,

More information

Apprenticeship Training Standard Log Book

Apprenticeship Training Standard Log Book Apprenticeship Training Standard Log Book Tool and Die Maker 430A What Is This About? The Apprenticeship Training Standard Log Book identifies all the skills associated with your trade in Ontario. It is

More information

Other Lathe Operations

Other Lathe Operations Chapter 15 Other Lathe Operations LEARNING OBJECTIVES After studying this chapter, students will be able to: Safely set up and operate a lathe using various work-holding devices. Properly set up steady

More information

SEMPEO SQA Unit Code FP2J 04 Preparing and using CNC turning machines

SEMPEO SQA Unit Code FP2J 04 Preparing and using CNC turning machines Overview This standard covers a broad range of basic computer numerical control (CNC) turning competences that will prepare you for entry into the engineering or manufacturing sectors, creating a progression

More information

STATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK

STATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK STATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE MECH 121 - MANUFACTURING PROCESSES I Prepared By: Daniel Miller Updated By: Daniel Miller (April 2015) CANINO SCHOOL OF

More information

Ahsanullah University of Science and Technology (AUST) Department of Mechanical and Production Engineering

Ahsanullah University of Science and Technology (AUST) Department of Mechanical and Production Engineering Ahsanullah University of Science and Technology (AUST) Department of Mechanical and Production Engineering LABORATORY MANUAL For the students of Department of Mechanical and Production Engineering 1 st

More information

National Skill Standards (NIMS) PMT201 PMT104 PMT104 PMT104

National Skill Standards (NIMS) PMT201 PMT104 PMT104 PMT104 1of 16 Institute for Metalworking s. Pennsylvania Task # Content s, Titles Task Statements 00 SAFETY AND CAREER THWAYS A MACHINE SHOP KNOWLEDGE AND SAFETY PRACTICES A001 workplace safety A002 Demonstrate

More information

THEORY OF METAL CUTTING

THEORY OF METAL CUTTING THEORY OF METAL CUTTING INTRODUCTION Overview of Machining Technology Mechanism of chip formation Orthogonal and Oblique cutting Single Point and Multipoint Cutting Tools Machining forces - Merchant s

More information

WASSCE / WAEC METALWORK SYLLABUS

WASSCE / WAEC METALWORK SYLLABUS WASSCE / WAEC METALWORK SYLLABUS WWW.LARNEDU.COM Visit www.larnedu.com for WASSCE / WAEC syllabus on different subjects and more great stuff to help you ace the WASSCE in flying colours. 1. PREAMBLE The

More information

Producing components using hand fitting techniques

Producing components using hand fitting techniques Unit 005 Producing components using hand fitting techniques Level: 2 Credit value: 14 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required

More information

HOME WORKSHOP HANDBOOK Rugged BENCH GRINDER. By JOEL B. LONG

HOME WORKSHOP HANDBOOK Rugged BENCH GRINDER. By JOEL B. LONG 6 HOME WORKSHOP HANDBOOK Rugged BENCH GRINDER W By JOEL B. LONG ITH this bench grinder you can keep your cutting tools sharp and do general offhand grinding, and can, with the aid of various attachments,

More information