SAMET SOFT CLOSE DRAWER SYSTEMS DRAWER SYSTEMS. Samet - Europe s Finest. (08) (03)
|
|
- Curtis Wilson
- 5 years ago
- Views:
Transcription
1 9
2 CONTENTS SAMET SAMET SOFT CLOSE DRAWER 11 NEW SMART BOX 12 NEW SMART BOX FEATURES 13 NEW SMART BOX 99MM HIGH DRAWERS 16 NEW SMART BOX 155MM HIGH DRAWERS 18 NEW SMART BOX 219MM HIGH DRAWERS 20 IN-BOX 22 IN-BOX 99MM HIGH DRAWERS 24 IN-BOX 155MM HIGH DRAWERS 26 IN-BOX 219MM HIGH DRAWERS 28 NEW SMART BOX INDUSTRIAL PACKS 30 NEW SMART BOX & IN-BOX DRAWER STABILIZER 32 NEW SMART BOX & IN-BOX ACCESSORIES & JIGS 34 NEW SMART BOX ASSEMBLY INSTRUCTIONS 37 IN-BOX ASSEMBLY INSTRUCTIONS 38 SMART SLIDE 39 SMART SLIDE FULL EXTENSION 40 SMART SLIDE FULL EXTENSION PUSH TO OPEN 42 SLIDEA 44 SLIDEA SINGLE EXTENSION DRAWER WITH LOCK 46 SLIDEA SINGLE EXTENSION DRAWER WITH PIN 48 SLIDEA SINGLE EXTENSION DRAWER WITH LOCK 50 SMART SLIDE DRAWER STABILIZER 52 SMART SLIDE ACCESSORIES 53 SAMET DRAWER JIGS 54 SAM BOX 58 SAM BOX 86MM 60 SAM BOX 118MM 62 SAM BOX 150MM 64 SAM BOX ACCESSORIES 66 SAM BOX DRAWER SOFT CLOSE MECHANISM 67 LOBEK EXPRO SOFT CLOSE DRAWER 68 EXPRO 105MM HIGH DRAWERS 69 EXPRO 185MM HIGH DRAWERS 70 EXPRO 225MM HIGH DRAWERS 71 DRAWER INSTALLATION INFORMATION 72 SAMET & LOBEK ROLLER RUNNERS 74
3 SAMET SOFT CLOSE DRAWER Samet - Europe s Finest For almost 40 years Samet have established themselves as one of the leading cabinet hardware manufacturers in Europe; in fact, Samet is one of the top five across the globe. Established in Turkey in 1973, Samet began by manufacturing furniture accessories. Today Samet manufactures more than 2400 products sold to a total of 90 countries across 5 continents. In Australia, Nessco has the exclusive distribution rights across the country. SAMET (08) sales@nessco.com.au (03) vicsales@nessco.com.au 11
4 SAMET NEW SMART BOX Introducing The New Smart Box The Smart Box Version 3 (V3) boasts an easy drawer locking system, requiring minimal effort in assembly and disassembly, greater stability due to increased rail profile strength and increased dynamic stability with drawers now available rated to 40kgs and 65kgs. The Smart Box V3 has been LGA quality certified and TSE approved, which are amongst the highest certifications in Europe. In 2010, the Smart Box V2 was awarded the MAKSDER award for Best Design in the category of Drawer Systems. 12
5 SAMET NEW SMART BOX FEATURES Smart Click Smart Click enables you to assemble the front panel in one single movement by simply pressing the red button on both sides. The front panel can be adjusted in four directions: up - down ± 2mm & left - right ± 1.5mm. Smart Fit Equipped with Smart Fit, you can easily release the Smart Box drawer with a single lift. No need for disassembling any screws or latches, just pull & lift. (08) sales@nessco.com.au (03) vicsales@nessco.com.au 13
6 SAMET NEW SMART BOX FEATURES 2 Greater Stability 1 Convenient Assembly 3 Even Quieter 7Reasons to buy the new and improved Smart Box design: ÎÎ Convenient Assembly due to the brake system now being located in the side of the drawer, making assembly easier and safer. ÎÎ Greater Stability due to the increased rail profile strength and a new synchronisation system allowing for greater control. ÎÎ Even quieter with an improved carrier system that allows the drawers to operate more smoothly and silently. ÎÎ Smoother Closing due to the soft close mechanism now being located on the drawer rail; the drawer will close slowly even if pushed fast. ÎÎ Improved Dynamic Loading Capacity. The drawers are now available in 40kg and 65kg dynamic loading capacity, meaning the drawers can carry more load than ever before. ÎÎ More Accessory Alternatives to add value to your space and storage. At Nessco we have a large range of accessories to suit all your requirements. ÎÎ Enhanced Safety through the improved rail and drawer-lock mechanism providing you peace of mind. 14
7 SAMET NEW SMART BOX FEATURES 6 More Accessory Alternatives 4 Smoother Closing 5 Improved Dynamic Loading Capacity 7 Enhanced Safety Lifetime Warranty The latest innovation Smart Box drawer systems manufactured by Samet are covered by a lifetime warranty that offers a full replacement guarantee on Smart Box drawer systems. In the unlikely event that you should experience any manufacturing quality issues with Smart Box drawer systems, you can rest assured that you will be covered by this lifetime warranty. The warranty covers the consumer for the replacement of faulty hardware only and does not cover the removal or installation costs of the defective product. Moreover, Samet does not cover consequential / incidental damages, incorrect installation, products exposed to loads in excess of specifications, used for purposes other than that for which they are intended, commercial usages such as hotels, restaurants etc. and vandalism. Samet will not be liable for any consequential or incidental damages resulting from or contributed to by the use, installation, performance or failure of products. (08) sales@nessco.com.au (03) vicsales@nessco.com.au 15
8 SAMET NEW SMART BOX 99MM HIGH DRAWERS Product Details A See page mm High Drawers Soft closing system 40 and 65kg dynamic loading capacity ± 2mm up/down, ± 1.5mm right/left adjustable 68mm backboard height 270/300/350/400/450/500/550mm drawer length for 40kg 450/500/550/600/650mm drawer length for 65kg Smart Click: front panel toolless assembly/disassembly Smartfit easy toolless drawer removal and fitting Long service life New Smart Box main package LOADING CAPACITY 40kg CODE NOMINAL SIZE PACKING SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set New Smart Box main package LOADING CAPACITY 65kg CODE NOMINAL SIZE PACKING SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set Front Connection Pieces CODE PRODUCT TYPE PACKING SB Zamac ø10 with dowels 500pcs MAIN PACKAGE INCLUDES: 1. New Smart Box Slide Right-Left 2. New Smart Box Sides Right-Left 3. Backboard Holder without Gallery Railing Right-Left 4. Front Connection Pieces Screw-On 5. Decorative Covers 16
9 SAMET NEW SMART BOX 99MM HIGH DRAWERS REQUIREMENT FOR CABINET PLACEMENT 17,5 Cabinet Internal Width Chipboard Back Dimensions Width=Cabinet Internal Width Chipboard Screw Ø3,5x16mm ,5 For Ø10 Dowels Hole: Ø10x12 68 Chipboard Back Dimensions Thickness 16 or 18mm 16 Chipboard Screw Ø3,5x16mm min. 32 min. 50 min Wooden Bottom Panel Width=Cabinet Internal Width - 81 Cabinet Internal Width - 35 CHIPBOARD BACK - DIMENSIONS / APPLICATION SLIDE SCREW LOCATION 1. Chipboard Base Dimensions 2. Chipboard Back Dimensions 68 CIW NS - 5 CIW CD= NS+3mm CD CIW NS Cabinet Depth Cabinet Internal Width Nominal Size CIW - 81 METAL BACKBOARD - APPLICATION CIW 16 MBW= CIW-29 CD= NS+3mm 3. Chipboard Base Dimensions NS Metal Back Panel without Gallery Railing Order Requirements: SB *MBW To obtain your desired color please add one of the below-mentioned figures to the end of the seven-digit code. 1= White 3= Gray Calculation for 18mm thick side panels Example for cabinet width of 600mm Cabinet Internal Width= 564mm MBW= 564mm - 29mm= 535mm Order: sb Color MBW Metal Back Panel without Gallery Railing CODE NOMINAL SIZE PACKING SB mm 25 Pcs SB mm 25 Pcs SB mm 25 Pcs SB mm 10 Pcs SB mm 10 Pcs SB mm 10 Pcs CD Cabinet Depth CIW Cabinet Internal Width NS Nominal Size MBW Metal Back Panel Width CIW - 81 *Special order of metal back panels can be made for drawers with wooden side panel thickness other than 18mm (08) sales@nessco.com.au (03) vicsales@nessco.com.au 17
10 SAMET NEW SMART BOX 155MM HIGH DRAWER Product Details A See page mm High Drawers 2 Soft closing system 40 and 65kg dynamic loading capacity ± 2mm up/down, ± 1.5mm right/left adjustable 116mm backboard height 270/300/350/400/450/500/550mm drawer length for 40kg 450/500/550/600/650mm drawer length for 65kg Smart Click: front panel toolless assembly/disassembly Smartfit easy toolless drawer removal and fitting Long service life New Smart Box main package LOADING CAPACITY 40kg CODE NOMINAL SIZE PACKING SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set New Smart Box main package LOADING CAPACITY 65kg CODE NOMINAL SIZE PACKING SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set Front Connection Pieces CODE PRODUCT TYPE PACKING SB Zamac ø10 with dowels 500pcs MAIN PACKAGE INCLUDES: 1. New Smart Box Slide Right-Left 2. New Smart Box Sides Right-Left 3. Backboard Holder with Gallery Railing Right-Left 4. Front Connection Pieces Screw-On 5. Decorative Covers 6. Gallery Rail 7. Steel Side Panel Back Connectors CODE PRODUCT TYPE COLOUR SB Single Gallery Railing White Gallery Rails - STD CODE NOMINAL SIZE COLOUR SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White Plexy Side Panel H:48 CODE LENGTH PACKING COLOUR SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White SB mm 10 Set/Ctn Trans SB mm 10 Set/Ctn Trans SB mm 10 Set/Ctn Trans SB mm 10 Set/Ctn Trans Gallery Rails Easy Mount Screw Fix CODE NOMINAL SIZE COLOUR SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White Steel Side Panel H:48 CODE LENGTH PACKING COLOUR SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White Gallery Rails Easy Mount Dowel Fix CODE NOMINAL SIZE COLOUR SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White 18
11 SAMET NEW SMART BOX 155MM HIGH DRAWER REQUIREMENT FOR CABINET PLACEMENT 14,5 Cabinet Internal Width Cabinet Internal Width -29 Chipboard Back Dimensions Width=Cabinet Internal Width Hole: Ø10 Depth: 12 Chipboard Screw Ø3,5x16mm min For Ø10 Dowels Hole: Ø10x Chipboard Back Dimensions Thickness 16 or 18mm ,5 16 Chipboard Screw Ø3,5x16mm 13 min. 32 min ,5 Wooden Bottom Panel Width=Cabinet Internal Width - 81 Cabinet Internal Width - 35 CHIPBOARD BACK - DIMENSIONS / APPLICATION SLIDE SCREW LOCATION 1. Chipboard Base Dimensions 2. Chipboard Back Dimensions 116 CIW NS - 5 CIW CD= NS+3mm CD CIW NS Cabinet Depth Cabinet Internal Width Nominal Size CIW - 81 METAL BACKBOARD - APPLICATION CIW 16 MBW= CIW-29 CD= NS+3mm 3. Chipboard Base Dimensions NS Metal Backboard Side Panel H:48 Order Requirements:SB *MBW To obtain your desired color please add one of the below-mentioned figures to the end of the seven-digit code. 1= White 3= Gray Calculation for 18mm thick side panels Example for cabinet width of 600mm Cabinet Internal Width= 564mm MBW= 564mm - 29mm= 535mm Order: sb Color MBW Metal Back Panel with Gallery Railing CODE NOMINAL SIZE PACKING SB mm 25 Pcs SB mm 25 Pcs SB mm 25 Pcs SB mm 10 Pcs SB mm 10 Pcs SB mm 10 Pcs CD Cabinet Depth CIW Cabinet Internal Width NS Nominal Size MBW Metal Back Panel Width CIW - 81 *Special order of metal back panels can be made for drawers with wooden side panel thickness other than 18mm (08) sales@nessco.com.au (03) vicsales@nessco.com.au 19
12 SAMET NEW SMART BOX 219MM HIGH DRAWERS Product Details A See page mm High Drawers 2 Soft closing system 40 and 65kg dynamic loading capacity ± 2mm up/down, ± 1.5mm right/left adjustable 180mm backboard height 270/300/350/400/450/500/550mm drawer length for 40kg 450/500/550/600/650mm drawer length for 65kg Smart Click: front panel toolless assembly/disassembly Smartfit easy toolless drawer removal and fitting Long service life New Smart Box main package LOADING CAPACITY 40kg CODE NOMINAL SIZE PACKING SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set New Smart Box main package LOADING CAPACITY 65kg CODE NOMINAL SIZE PACKING SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set Front Connection Pieces CODE PRODUCT TYPE PACKING SB Zamac ø10 with dowels 500pcs MAIN PACKAGE INCLUDES: 1. New Smart Box Slide Right-Left 2. New Smart Box Sides Right-Left 3. Backboard Holder with Gallery Railing Right-Left 4. Front Connection Pieces Screw-On 5. Decorative Covers 6. Gallery Rail 7. Steel Side Panel Back Connectors CODE PRODUCT TYPE COLOUR SB Single Gallery Railing White Plexy Side Panel H:112 CODE LENGTH PACKING COLOUR SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White SB mm 10 Set/Ctn Trans SB mm 10 Set/Ctn Trans SB mm 10 Set/Ctn Trans SB mm 10 Set/Ctn Trans Steel Side Panel H:112 CODE LENGTH PACKING COLOUR SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White Back Connectors CODE PRODUCT TYPE COLOUR SB Double Gallery Railing White Gallery Rails - STD CODE NOMINAL SIZE COLOUR SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White Gallery Rails Easy Mount Screw Fix CODE NOMINAL COLOUR SIZE SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White Gallery Rails Easy Mount Dowel Fix CODE NOMINAL COLOUR SIZE SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White 20
13 SAMET NEW SMART BOX 219MM HIGH DRAWERS REQUIREMENT FOR CABINET PLACEMENT 14,5 Cabinet Internal Width Cabinet Internal Width -29 Chipboard Back Dimensions Width=Cabinet Internal Width Hole: Ø10 Depth: Chipboard Screw Ø3,5x16mm 64 min ,5 For Ø10 Dowels Hole: Ø10x12 16 Chipboard Screw Ø3,5x16mm min. 52 min ,5 CHIPBOARD BACK - DIMENSIONS / APPLICATION SLIDE SCREW LOCATION 1. Chipboard Base Dimensions 2. Chipboard Back Dimensions 180 CIW NS - 5 Wooden Bottom Panel Width=Cabinet Internal Width - 81 Cabinet Internal Width - 35 CIW 16 CD= NS+12mm CD Cabinet Depth CIW Cabinet Internal Width NS Nominal Size CIW - 81 METAL BACKBOARD - APPLICATION CIW 16 MBW= CIW-29 CD= NS + 12mm 3. Chipboard Base Dimensions NS Metal Backboard Side Panel H:112 Order Requirements: SB *MBW To obtain your desired color please add one of the below-mentioned figures to the end of the seven-digit code. 1= White 3= Gray Calculation for 18mm thick side panels Example for cabinet width of 600mm Cabinet Internal Width= 564mm MBW= 564mm - 29mm= 535mm Order: sb Color MBW Metal Back Panel with Gallery Railing CODE NOMINAL SIZE PACKING SB mm 25 Pcs SB mm 25 Pcs SB mm 25 Pcs SB mm 10 Pcs SB mm 10 Pcs SB mm 10 Pcs CD Cabinet Depth CIW Cabinet Internal Width NS Nominal Size MBW Metal Back Panel Width CIW - 81 *Special order of metal back panels can be made for drawers with wooden side panel thickness other than 18mm (08) sales@nessco.com.au (03) vicsales@nessco.com.au 21
14 SAMET IN-BOX Volume In-Box compliments the Smart Box family by allowing greater usability of inner drawers. Smart inner drawers allow easy organisation of your kitchen ingredients and offer greater use of space within your pantry. Experience the comfort of Smart inner boxes with full extension, optional depths, heavy load capacity, AIRBRAKE technology and separation units. 22
15 SAMET IN-BOX Composition Separation units allow you to make small spaces more efficient. Smart inner solutions allow you to simplify your pantry and drawer organisation using interchangeable internal dividers that are easy to mount and demount to suit your requirements. (08) (03)
16 SAMET IN-BOX 99MM HIGH DRAWERS Product Details A See page mm High Drawers Soft closing system 40 and 65kg dynamic loading capacity White color 68mm backboard height 270/300/350/400/450/500/550mm drawer length for 40kg 450/500/550/600/650mm drawer length for 65kg Smart Click: front panel toolless assembly/disassembly Smartfit easy toolless drawer removal and fitting Long service life New Smart Box main package LOADING CAPACITY 40kg CODE NOMINAL SIZE PACKING SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set New Smart Box main package LOADING CAPACITY 65kg CODE NOMINAL SIZE PACKING SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set MAIN PACKAGE INCLUDES: 1. In-Box Slide Right-Left 2. In-Box Side Right-Left 3. Backboard Holder without Gallery Railing Right-Left 4. Front Connection Pieces 5. Decorative Covers 6. In-Box Front Panel Front Panel CODE LENGTH PACKING COLOUR SB mm 10 Set White Front Connectors CODE PRODUCT TYPE COLOUR SB Without Gallery Railing White 24
17 SAMET IN-BOX 99MM HIGH DRAWERS REQUIREMENT FOR CABINET PLACEMENT Cabinet Internal Width Chipboard Back Dimensions Width=Cabinet Internal Width Chipboard Screw Ø3,5x16mm min Chipboard Screw Ø3,5x16mm min. 52 min Wooden Bottom Panel Width=Cabinet Internal Width - 81 CHIPBOARD BACK - DIMENSIONS / APPLICATION SLIDE SCREW LOCATION 1. Chipboard Base Dimensions 2. Chipboard Back Dimensions 68 CIW - 90 CIW CD= NS+12mm NS - 5 CD CIW NS Cabinet Depth Cabinet Internal Width Nominal Size CIW - 81 METAL BACKBOARD - APPLICATION CIW 16 MBW= CIW-29 CD= NS+12mm 3. Chipboard Base Dimensions NS Metal Back Panel without Gallery Railing Order Requirements: SB *MBW To obtain your desired color please add one of the below-mentioned figures to the end of the seven-digit code. 1= White 3= Gray Calculation for 18mm thick side panels Example for cabinet width of 600mm Cabinet Internal Width= 564mm MBW= 564mm - 29mm= 535mm Order: sb Color MBW Metal Back Panel without Gallery Railing CODE NOMINAL SIZE PACKING SB mm 25 Pcs SB mm 25 Pcs SB mm 25 Pcs SB mm 10 Pcs SB mm 10 Pcs SB mm 10 Pcs CD Cabinet Depth CIW Cabinet Internal Width NS Nominal Size MBW Metal Back Panel Width CIW - 81 *Special order of metal back panels can be made for drawers with wooden side panel thickness other than 18mm Calculation Method for Front Panel Dimensions: Cut Measurement = Cabinet Internal Width - 99 (08) sales@nessco.com.au (03) vicsales@nessco.com.au 25
18 SAMET IN-BOX 155MM HIGH DRAWERS Product Details 3 1 A See page mm High Drawers 8 Soft closing system 40 and 65kg dynamic loading capacity White color 116mm backboard height 270/300/350/400/450/500/550mm drawer length for 40kg 450/500/550/600/650mm drawer length for 65kg Smart Click: front panel toolless assembly/disassembly Smartfit easy toolless drawer removal and fitting Long service life New Smart Box main package LOADING CAPACITY 40kg CODE NOMINAL SIZE PACKING SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set New Smart Box main package LOADING CAPACITY 65kg CODE NOMINAL SIZE PACKING SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set MAIN PACKAGE INCLUDES: 1. In-Box Slide Right-Left 2. In-Box Side Right-Left 3. Backboard Holder with Gallery Railing Right-Left 4. Front Connection Pieces Screw-On 5. Decorative Covers 6. In-Box Front Panel 7. Gallery Rail 8. Steel Side Panel Front Connectors CODE PRODUCT TYPE COLOUR SB Single Gallery Railing White Gallery Rails - STD (must be used on In-Box) CODE NOMINAL SIZE COLOUR SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White Back Connectors CODE PRODUCT TYPE COLOUR SB Single Gallery Railing White Plexy Side Panel H:48 CODE LENGTH PACKING COLOUR SB mm 10 Set/ Ctn White SB mm 10 Set/ Ctn White SB mm 10 Set/ Ctn White SB mm 10 Set/ Ctn Trans SB mm 10 Set/ Ctn Trans SB mm 10 Set/ Ctn Trans Front Panel CODE LENGTH PACKING COLOUR SB mm 10 Set White Steel Side Panel H:48 CODE LENGTH PACKING COLOUR SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White 26
19 SAMET IN-BOX 155MM HIGH DRAWERS REQUIREMENT FOR CABINET PLACEMENT Cabinet Internal Width -29 Chipboard Back Dimensions Width=Cabinet Internal Width Chipboard Screw Ø3,5x16mm min Chipboard Screw Ø3,5x16mm 13 min. 32 min. 52 Wooden Bottom Panel Width=Cabinet Internal Width - 81 CHIPBOARD BACK DIMENSIONS / APPLICATION SLIDE SCREW LOCATION 1. Chipboard Base Dimensions 2. Chipboard Back Dimensions 116 CIW NS - 3 CIW CD= NS+3mm CD CIW NS Cabinet Depth Cabinet Internal Width Nominal Size CIW - 81 METAL BACKBOARD - APPLICATION CIW 16 MBW= CIW-29 CD= NS+3mm 3. Chipboard Base Dimensions NS Metal Backboard Side Panel H:48 Order Requirements: SB *MBW To obtain your desired color please add one of the below-mentioned figures to the end of the seven-digit code. 1= White 3= Gray Calculation for 18mm thick side panels Example for cabinet width of 600mm Cabinet Internal Width= 564mm MBW= 564mm - 29mm= 535mm Order: sb Color MBW Metal Back Panel with Gallery Railing CODE NOMINAL SIZE PACKING SB mm 25 Pcs SB mm 25 Pcs SB mm 25 Pcs SB mm 10 Pcs SB mm 10 Pcs SB mm 10 Pcs CD Cabinet Depth CIW Cabinet Internal Width NS Nominal Size MBW Metal Back Panel Width CIW - 81 *Special order of metal back panels can be made for drawers with wooden side panel thickness other than 18mm Calculation Method for Front Panel Dimensions: Cut Measurement = Cabinet Internal Width - 99 (08) sales@nessco.com.au (03) vicsales@nessco.com.au 27
20 SAMET IN-BOX 219MM HIGH DRAWERS Product Details 3 1 A See page mm High Drawers 9 Soft closing system 40 and 65kg dynamic loading capacity White color 180mm backboard height 270/300/350/400/450/500/550mm drawer length for 40kg 450/500/550/600/650mm drawer length for 65kg Smart Click: front panel toolless assembly/disassembly Smartfit easy toolless drawer removal and fitting Long service life New Smart Box main package LOADING CAPACITY 40kg CODE NOMINAL SIZE PACKING SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set Front Panel CODE LENGTH PACKING COLOUR SB mm 10 Set White New Smart Box main package LOADING CAPACITY 65kg CODE NOMINAL SIZE PACKING SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set SB mm 1 Set Top Gallery Railing Bar CODE LENGTH PACKING COLOUR SB mm 10 Set White MAIN PACKAGE INCLUDES: 1. In-Box Slide Right-Left 2. In-Box Side Right-Left 3. Backboard Holder with Gallery Railing Right-Left 4. Front Connection Pieces Screw-On 5. Decorative Covers 6. In-Box Front Panel 7. In-Box Front Rail 8. Gallery Rail 9. Steel Side Panel Front Connectors CODE PRODUCT TYPE COLOUR SB Double Gallery Railing White Plexy Side Panel H:112 CODE LENGTH PACKING COLOUR SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White SB mm 10 Set/Ctn Trans SB mm 10 Set/Ctn Trans SB mm 10 Set/Ctn Trans SB mm 10 Set/Ctn Trans Steel Side Panel H:112 CODE LENGTH PACKING COLOUR SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White SB mm 10 Set/Ctn White Gallery Rails - STD (must be used on In-Box) NOMINAL CODE COLOUR SIZE Gallery Rails Easy Mount Screw Fix NOMINAL CODE SIZE COLOUR Gallery Rails Easy Mount Dowel Fix NOMINAL CODE COLOUR SIZE SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White Back Connectors SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White CODE PRODUCT TYPE COLOUR SB mm White SB mm White SB mm White SB Double Gallery Railing White SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White SB mm White 28
21 SAMET IN-BOX 219MM HIGH DRAWERS REQUIREMENT FOR CABINET PLACEMENT Cabinet Internal Width-29 Chipboard Back Dimensions Width=Cabinet Internal Width min Chipboard Screw Ø3,5x16mm Chipboard Screw Ø3,5x16mm min. 52 min. 32 Wooden Bottom Panel Width=Cabinet Internal Width - 81 CHIPBOARD BACK DIMENSIONS / APPLICATION SLIDE SCREW LOCATION 1. Chipboard Base Dimensions 2. Chipboard Back Dimensions 180 CIW NS - 3 CIW 16 CD= NS+12mm CD Cabinet Depth CIW Cabinet Internal Width NS Nominal Size CIW - 81 METAL BACKBOARD - APPLICATION CIW 16 MBW= CIW-29 CD= NS + 12mm 3. Chipboard Base Dimensions NS Metal Backboard Side Panel H:112 Order Requirements: SB *MBW To obtain your desired color please add one of the below-mentioned figures to the end of the seven-digit code. 1= White 3= Gray Calculation for 18mm thick side panels Example for cabinet width of 600mm Cabinet Internal Width= 564mm MBW= 564mm - 29mm= 535mm Order: sb Color MBW Metal Back Panel with Gallery Railing CODE NOMINAL SIZE PACKING SB mm 25 Pcs SB mm 25 Pcs SB mm 25 Pcs SB mm 10 Pcs SB mm 10 Pcs SB mm 10 Pcs CD Cabinet Depth CIW Cabinet Internal Width NS Nominal Size MBW Metal Back Panel Width CIW - 81 *Special order of metal back panels can be made for drawers with wooden side panel thickness other than 18mm Calculation Method for Front Panel Dimensions: Cut Measurement = Cabinet Internal Width - 99 Calculation Method for Front Panel Dimensions: Cut Measurement = Cabinet Internal Width - 53 (08) sales@nessco.com.au (03) vicsales@nessco.com.au 29
22 SAMET NEW SMART BOX INDUSTRIAL PACKS Product Details See page 21 Industrial Packs Improved soft closing system guarantees smooth running Dynamic load capacity: 40kg ± 2 mm vertical and ± 1,5 mm horizontal adjustment Finish: White Wooden backboard thickness option: 18 mm Drawer Length for 40 Kg: 400/450/500mm Smart-Click: Tool free assembly and removal of front panel Smart-Fit: Simple and tool free assembly, as well as removal of drawer The improved stability guarantees a long product durability New Smart Box Industrial Packs LOADING CAPACITY 40kg CODE DESCRIPTION NOMINAL SIZE HEIGHT 400STD 99x400 STD 40kg Industrial Smart Box Set (kit) 400mm 99mm 400MED 155x400 MED 40kg 1 Gallery Industrial Smart Box Set (kit) 400mm 155mm 400POT 219x400 POT 40kg 1 Gallery Industrial Smart Box Set (kit) 400mm 219mm 400POTI 219x400 POT 40kg 1 Gallery & Infill Industrial Smart Box Set (kit) 400mm 219mm 450STD 99x450 STD 40kg Industrial Smart Box Set (kit) 450mm 99mm 450MED 155x450 MED 40kg 1 Gallery Industrial Smart Box Set (kit) 450mm 155mm 450POT 219x450 POT 40kg 1 Gallery Industrial Smart Box Set (kit) 450mm 219mm 450POTI 219x450 POT 40kg 1 Gallery & Infill Industrial Smart Box Set (kit) 450mm 219mm 500STD 99x500 STD 40kg Industrial Smart Box Set (kit) 500mm 99mm 500MED 155x500 MED 40kg 1 Gallery Industrial Smart Box Set (kit) 500mm 155mm 500POT 219x500 POT 40kg 1 Gallery Industrial Smart Box Set (kit) 500mm 219mm 500POTI 219x500 POT 40kg 1 Gallery & Infill Industrial Smart Box Set (kit) 500mm 219mm MAIN PACKAGE INCLUDES: 1. New Smart Box Slide Left 2. New Smart Box Slide Right 3. Sides Left 4. Sides Right 5. Gallery Rails 6. Decorative Covers 7. Top Gallery Railing Holder 8. Bottom Gallery Railing Holder 9. Front Connection Pieces 10. Side Panels 11. Backboard Holder with Gallery Railing Left 12. Backboard Holder with Gallery Railing Right A. Metal Backboard 30
23 SAMET NEW SMART BOX INDUSTRIAL PACKS New Smart Box Drawer 1-2 New Smart Box Slide Right-Left 3-4 New Smart Box Side Right-Left 6 Decorative Cover x 2 Pcs. 9 Front Connection Pieces x 2 Pcs Without Gallery Railing Backboard Holder Right-Left New Smart Box Drawer with Single Gallery Railing 1-2 New Smart Box Slide Right-Left 3-4 New Smart Box Side Right-Left 5 Gallery Railing Bar x 1 Set 6 Decorative Cover x 2 Pcs. 7 Top Gallery Railing Holder x 2 Pcs. 9 Front Connection Pieces x 2 Pcs Single Gallery Railing Backboard Holder Right-Left New Smart Box Drawer with Double Gallery Railing 1-2 New Smart Box Slide Right-Left 3-4 New Smart Box Side Right-Left 5 Gallery Railing Bar x 2 Set 6 Decorative Cover x 2 Pcs. 7 Top Gallery Railing Holder x 2 Pcs. 8 Bottom Gallery Railing Holder x 2 Pcs. 9 Front Connection Pieces x 2 Pcs Double Gallery Railing Backboard Holder Right-Left New Smart Box Drawer Side Panel H: New Smart Box Slide Right-Left 3-4 New Smart Box Side Right-Left 5 Gallery Railing Bar x 1 Set 6 Decorative Cover x 2 Pcs. 7 Top Gallery Railing Holder x 2 Pcs. 9 Front Connection Pieces x 2 Pcs. 10 Side Panel H=48 x 1 Set Single Gallery Railing Backboard Holder Right-Left New Smart Box Drawer Side Panel H: New Smart Box Slide Right-Left 3-4 New Smart Box Side Right-Left 5 Gallery Railing Bar x 1 Set 6 Decorative Cover x 2 Pcs. 7 Top Gallery Railing Holder x 2 Pcs. 9 Front Connection Pieces x 2 Pcs. 10 Side Panel H=112 x 1 Set H: 112 Side Panel Backboard Holder Right-Left (08) sales@nessco.com.au (03) vicsales@nessco.com.au 31
24 NEW SMART BOX & IN-BOX DRAWER STABILIZER Product Details 1 Stabilizer 2 Front Panel 3 Wooden Floor Drawer Front Stabilizer Recommended for the application with cabinets of 600mm width or more. Used if the front panel of the drawer is a timber. Drawer Front Stabilizer CODE PACKING COLOUR SB pcs Grey FRONT PANEL HOLE DIMENSIONS WOODEN FLOOR HOLE DIMENSIONS Recommened fixing is to locate the mechanism in the middle of the front panel. Use Ø3.5mm diameter chipboard screw when fixing the mechanism 32
25 NEW SMART BOX & IN-BOX ACCESSORIES & JIGS Product Details Smart Distance Bracket SLIDE SCREW LOCATION Smart distance bracket is used for In-Box applications of Smart drawer slides. Ø6mm Euro Screw is recommended to be used as fixing screw. When calculating the drawer dimensions the thickness of the distance bracket should be considered as S=25mm. Smart Distance Bracket CODE ORIENTATION PACKING COLOUR SB Right 50 pcs Grey SB Left 50 pcs Grey Product Details The vertical and horizontal adjustments are made as shown; by assembling the front panel marking template to the drawer in the cabinet. Drawer Front Panel Marking Template This template provides direct application to mark the front panels of Smart Box drawers without any measurement. It can be used for drawers without, with single and with double gallery railing and side panel H: 48 and H: 112 models. Front panel can be horizontally and vertically adjusted on the template. Drawer Front Panel Marking Template CODE PACKING SB Set / Box, 10 Sets / Ctn (08) sales@nessco.com.au (03) vicsales@nessco.com.au 33
26 NEW SMART BOX & IN-BOX ACCESSORIES & JIGS Product Details Drawer Inside Dividing Systems Adjustable cross dividing and lateral dividers. Various color options. Easy to remove and position. IN-BOX SIDE PANEL H:48 IN-BOX SIDE PANEL H: Lateral Divider CODE HEIGHT PACKING COLOUR SA mm 20 Pcs / Ctn White SA mm 20 Pcs / Ctn White Adjustable Aluminium Cross Dividing Panel CODE HEIGHT LENGTH PACKING COLOUR SA mm 1200mm 10 Pcs / Ctn White SA mm 1200mm 10 Pcs / Ctn White 3 Aluminium Cross Dividing Panel CODE HEIGHT LENGTH PACKING COLOUR SA mm 1200mm 10 Pcs / Ctn White SA mm 1200mm 10 Pcs / Ctn White Cross Dividing Connector CODE HEIGHT PACKING COLOUR SA mm 50 Pcs / Ctn White SA mm 50 Pcs / Ctn White 34
27 NEW SMART BOX & IN-BOX ACCESSORIES & JIGS Product Details Bottle Holder Applicable with all drawers used with gallery railings. For bottles with a diameter of Ø30- Ø100mm. The usage is recommended for bottom gallery railings with double gallery railing drawers Bottle Holder CODE PACKING COLOUR SA Pcs/Box, 80 Pcs/Ctn White Adjustable Gallery Railing CODE LENGTH PACKING COLOUR SA mm 10 Pcs/ Ctn White Adapter for Gallery Railing CODE PACKING COLOUR SA Pcs/Box, 200 Pcs/Ctn White Product Details Sink Cabinet Set for mm drawers. Various color options. Can be easily assembled. Sink Cabinet CODE LENGTH PACKING COLOUR SB mm 1 Set / Ctn White SB mm 1 Set / Ctn Grey *For sink cabinet with wire 500mm. Note: NS = 500mm (slide length) NS-3 ICW-81 (08) sales@nessco.com.au (03) vicsales@nessco.com.au 35
28 SAMET NEW SMART BOX ASSEMBLY INSTRUCTIONS New Smart Box Drawer Assembly & Mounting Wooden Drawer Bottom Wooden Backboard Wooden Backboard Mounting Mounting of Front Connecting part Front Panel Mounting Wooden Drawer Floor Mounting Decorative Cover Mounting Slide Mounting to Cabinet Drawer Mounting to Slide Drawer Mounting to Slide Removal of the drawer from the runner Removal of Front Panel *For front panel removal push the red button as indicated on the picture. Removal of Front Panel Click! Adjustment Mounting of wooden drawer base without using screws 1 2 Wooden drawer base is supported to the front panel The claws have to be mounted as shown on the picture. Adjusting mechanism If the lock slots shut down due to a failure; 1. Press the red button as shown on the picture 2. Turn the screw driver as shown on the picture 8 8 Mounting Gallery Railings Mounting of Dowel Mounting of Gallery Railing Mounting of Gallery Railing Holders Mounting of Gallery Railing Mounting of Gallery Raling Decorative Cover Easy Installation Borders Group Dowelled Type Mounting Screwed Type Mounting Mounting of Gallery Railing Mounting of Gallery Railing Mounting of Gallery Railing Ø10mm Ø2mm 36
29 SAMET IN-BOX ASSEMBLY INSTRUCTIONS In-Box Drawer Mounting & Fixing Wooden Drawer Bottom Wooden Backboard Wooden Backboard Mounting Mounting of front connectors Mounting of front connector group Wooden Drawer Floor Mounting Mounting of front panel stabilizer Mounting of Gallery Railing Holders Mounting of Gallery Railing Mounting of Gallery Raling Decorative Cover Decorative Cover Mounting Cabinet Mounting of the Drawer to the Cabinet Click! Removing the Drawer In-Box Side Panel H: Side Panel Mounting Side Panel Mounting Crush the pcs as shown. (08) sales@nessco.com.au (03) vicsales@nessco.com.au 37
30 SAMET SMART SLIDE Traditional Aesthetics If you prefer wood sided drawers, Smart Slide is a perfect solution. Smart Slide complements the Smart range by offering the benefits of Airbrake technology with a heavy 30kg dynamic load capacity. The concealed nature of Smart Slide offers a traditional aesthetic look and feel for your kitchen and bathroom environments. 38
31 SAMET SMART SLIDE Contemporary Solutions Push to Open Smart Slide is the latest technology by Samet that offers a contemporary look and feel in your environment. With the Push to Open Smart Slide you can create sleek surfaces that bring natural elegance to your furniture. (08) sales@nessco.com.au (03) vicsales@nessco.com.au 39
32 SAMET SMART SLIDE FULL EXTENSION Product Details Full Extension Drawer Concealed, full extension wooden drawer slide Forward adjustment is enabled by screw-on Push Open mechanism Easy removal / fitting with Smart Lock With Smart Lock, Right/Left and Up/Down freehand adjustment 30kg dynamic load capacity Maximum 19mm wooden side application 250/300/350/400/450/500/600mm drawer length Long service life Smart Slide Drawer Slide (right-left) CODE NOMINAL SIZE PACKING SL mm 6 Pcs SL mm 6 Pcs SL mm 6 Pcs SL mm 6 Pcs SL mm 6 Pcs SL mm 6 Pcs SL mm 6 Pcs SL mm 6 Pcs Smart Lock (right-left) CODE ORIENTATION PACKING SL Right 100 Pcs SL Left 100 Pcs 40
33 SAMET SMART SLIDE FULL EXTENSION REQUIREMENT FOR CABINET PLACEMENT Cabinet Internal Width DIW=(ICW-45) ±0,5 min. 7 Ø3,5 Chipboard Screw or Ø6 Euro Screw *For 19mm, the formula (DIW = ICW 46mm) should be used while the horizontal adjustment kept in the internal position. *max.18 Ø min. 31,5 12 min. 41 DD=(NS-10) +0-2 NS CD=NS+min.3 SLIDE SCREW LOCATION mm mm mm CD Cabinet Depth CIW Cabinet Internal Width NS Nominal Size MBW Metal Back Panel Width (08) sales@nessco.com.au (03) vicsales@nessco.com.au 41
34 SAMET SMART SLIDE FULL EXTENSION PUSH TO OPEN Product Details Push Open Full Extension Drawer Concealed, single extension wooden drawer slide 3mm backward and forward adjustment is enabled by screw on Push Open mechanism Easy removal and mounting permitted by SmartLock The SmartLock System provides a ±1,5mm horizontal and +2mm upwards adjustment opportunity Dynamic load capacity: 30 Kg Maximum up to 19mm wooden side application Drawer Length alternatives: 250/300/350/400/450/500/550 /600mm Improved stability guarantees product durability Smart Slide Drawer Slide (right-left) CODE NOMINAL SIZE PACKING SL mm 6 Pcs SL mm 6 Pcs SL mm 6 Pcs SL mm 6 Pcs SL mm 6 Pcs SL mm 6 Pcs SL mm 6 Pcs SL mm 6 Pcs Smart Lock (right-left) CODE ORIENTATION PACKING SL Right 100 Pcs SL Left 100 Pcs 42
35 SAMET SMART SLIDE FULL EXTENSION PUSH TO OPEN REQUIREMENT FOR CABINET PLACEMENT Cabinet Internal Width DIW=(ICW-45) ±0,5 min. 7 *For 19mm, the formula (DIW = ICW 46mm) should be used while the horizontal adjustment kept in the internal position. Ø3,5 Chipboard Screw or Ø6 Euro Screw Ø6 *max min. 31, min DD=(NS-10) +0-2 NS CD=NS+min.3 SLIDE SCREW LOCATION mm mm mm CD Cabinet Depth CIW Cabinet Internal Width NS Nominal Size MBW Metal Back Panel Width (08) sales@nessco.com.au (03) vicsales@nessco.com.au 43
36 SAMET SLIDEA A Lifetime of Elegance A very special drawer that has the finest details all taken into consideration by Samet - Slidea. The Slidea drawer system has an opening and closing service life of over 80,000 cycles. It also features a slim design and is durable and elegant. The oil brake and stable moving slide systems allow for longevity and ease of use. 44
37 SAMET SLIDEA Design, Quality & a Long Lifespan, Combined as One Push to Open Slidea offers the most contemporary look and feel for your environment. With Push to Open Slidea you can create sleek surfaces that bring natural elegance to your furniture. (08) sales@nessco.com.au (03) vicsales@nessco.com.au 45
38 SAMET SLIDEA SINGLE EXTENSION WITH LOCK Product Details Single Extension Drawer with Lock (16mm) Concealed, single extension wooden drawer slide Easy removal/fitting with clip system +2,5mm up adjustment option with clip system Max 16mm wooden side application 350/400/450/500mm drawer length Long service life Oil brake soft close Slidea Drawer Slide (right-left) CODE NOMINAL SIZE PACKING SL mm 12 Pcs SL mm 12 Pcs SL mm 12 Pcs SL mm 12 Pcs Slidea Lock (right-left) CODE ORIENTATION PACKING SL Right 100 Pcs SL Left 100 Pcs 46
39 SAMET SLIDEA SINGLE EXTENSION WITH LOCK REQUIREMENT FOR CABINET PLACEMENT CIW +1 DIW=(CIW-42) - 0 max.16 Ø3,5 Chipboard Screw or Ø6 Euro Screw Ø min min. 34 DD=NS Ø6 2 NS CD=NS+min.5 SLIDE SCREW LOCATION 250mm mm mm 500mm min.34mm mm CD Cabinet Depth CIW Cabinet Internal Width NS Nominal Size MBW Metal Back Panel Width (08) sales@nessco.com.au (03) vicsales@nessco.com.au 47
40 5 DRAWER SAMET SLIDEA SINGLE EXTENSION WITH PIN Product Details Single Extension Drawer with Pin (16mm) Concealed, single extension wooden drawer slide Easy removal/fitting with clip system +2,5mm up adjustment option with clip system Max 16mm wooden side application 360/385/410/435/460/485/510mm drawer length Long service life No lock needed Oil brake soft close Slidea Drawer Slide (right-left) CODE NOMINAL SIZE PACKING SL mm 12 Set SL mm 12 Set SL mm 12 Set SL mm 12 Set SL mm 12 Set SL mm 12 Set SL mm 12 Set DRAWER DIMENSIONS AA BB AA BB Ø8 Ø Ø6 a b NOMINAL SIZE NS FITTING PINS A EXIT SAFETY B 360mm 275mm 255mm 385mm 285mm 265mm 410mm 300mm 280mm 435mm 310mm 290mm 460mm 335mm 315mm 485mm 350mm 330mm mm 360mm 340mm
41 SAMET SLIDEA SINGLE EXTENSION WITH PIN REQUIREMENT FOR CABINET PLACEMENT CIW +1 DIW=(CIW-42) - 0 max.16 Ø3,5 Chipboard Screw or Ø6 Euro Screw Ø min min. 34 DD=NS Ø6 2 NS CD=NS+min.5 SLIDE SCREW LOCATION 260 mm mm mm mm mm CD Cabinet Depth CIW Cabinet Internal Width NS Nominal Size MBW Metal Back Panel Width (08) sales@nessco.com.au (03) vicsales@nessco.com.au 49
42 SAMET SLIDEA PUSH-OPEN SINGLE EXTENSION WITH LOCK Product Details Push-Open Single Extension Drawer with Lock (16mm) Concealed, single extension wooden drawer slide Easy removal/fitting with clip system +2,5mm up adjustment option with clip system Max 16mm wooden side application 350/400/450/500mm drawer length Long service life Slidea Drawer Slide (right-left) CODE NOMINAL SIZE PACKING SL mm 12 Pcs SL mm 12 Pcs SL mm 12 Pcs SL mm 12 Pcs Slidea Lock (right-left) CODE ORIENTATION PACKING SL Right 100 Pcs SL Left 100 Pcs 50
43 SAMET SLIDEA PUSH-OPEN SINGLE EXTENSION WITH LOCK REQUIREMENT FOR CABINET PLACEMENT CIW +1 DIW=(CIW-42) - 0 max.16 Ø3,5 Chipboard Screw or Ø6 Euro Screw Ø min min. 34 DD=NS Ø6 2 NS CD=NS+min.5 SLIDE SCREW LOCATION 250mm mm mm 500mm min.34mm mm CD Cabinet Depth CIW Cabinet Internal Width NS Nominal Size MBW Metal Back Panel Width (08) sales@nessco.com.au (03) vicsales@nessco.com.au 51
44 SAMET SMART SLIDE DRAWER STABILIZER Product Details Gear Whell Fixing Part - Left Stabilizer Bar Fixing Part - Right Rack Left Gear Wheel Drawer Stabilizer For drawers with mm dimensions additional stabilizers are recommended Rack Right RACK MOUNTING DIMENSIONS NS CD MIN CD CIW NS DD NS Cabinet Depth Cabinet Internal Width Nominal Size Drawer Depth Nominal Size DIW=ICW-45 CD min=ns + 30mm Bar Length=ICW-63mm min 12 Drawer Stabilizer CODE NOMINAL SIZE PACKING COLOUR SA mm 20 Sets Grey ASSEMBLING According to the height of the drawer, Rack Mounting Connection holes (using the above-mentioned dimensions), have to be drilled on the right and left side of the cabinet. For this procedure the hand tamplet should be used. Racks are screwed to right and left sides of the cabinet The fixing body should be mounted based on the dimensions shown above by using a chip board screw (Ø3.5X25 ) Mount the gear wheel to the bar and place the drawer into the cabinet. 52
45 SAMET SMART SLIDE ACCESSORIES & JIGS Product Details Smart Distance Bracket SLIDE SCREW LOCATION Smart distance bracket is used for In-Box applications of Smart drawer slides Ø6mm Euro Screw is recommended to be used as fixing screw When calculating the drawer dimensions the thickness of the distance bracket should be considered as S=25mm Smart Distance Bracket CODE ORIENTATION PACKING COLOUR SB Right 50 pcs Grey SB Left 50 pcs Grey PREPARING A DRAWER SMART LOCK HOLE AXIS SMART LOCK (SMART SLIDE) Simply pull the latches and remove the drawer. The Smart Lock System permits easy horizontal and vertical adjustment of the Smart Slide drawers. (08) sales@nessco.com.au (03) vicsales@nessco.com.au 53
46 SAMET DRAWER JIGS Product Details Smart Drilling Jig Mark the slide s axis for screw positioning on the cabinet (see figure 1) Align the Smart Drill Jig according to the marked axis (see figure 2) The drilling jag has to be placed into the leading edge on the cabinet s inside wall. Then screwing holes with Ø2mm should be drilled. Euro screws require a Ø5mm diameter drill (see figure 3) Use the screw holes to mount the slide (see figure 4) Smart Drilling Jig CODE SCREW PACKING SB Chipboard 1 pcs SB Euro 1 pcs Figure 1 Figure 2 Figure 3 Figure
47 SAMET DRAWER JIGS Product Details Smart Lock Template To mount the Smart Slide lock (locking and adjustment mechanism) Ø2mm diameter assembly holes are required (see figure 1 and figure 2) To fix the runner to the drawer (back panel) clamp holes with a drill of Ø6mm are required (see figure 3) Attention: While drilling, place the assembly template on the drawer s relevant surface (see figure 1 and figure 3) Smart Lock Template CODE PACKING SB Pcs/Box, 10 Pcs/Crt Figure 1 Figure 2 b a 4 1 b a 2 4 Figure 3 * Slide back retaining hole. a b 3 4 b 2 4 a (08) sales@nessco.com.au (03) vicsales@nessco.com.au 55
48 SAMET DRAWER JIGS Smart Drilling Jig with Ruler The ruler allows to easily drill screw holes in both assembled and disassembled cabinets (See figure 1, 2 and 3) When drilling slide connection holes to assembled cabinets both inside and outside surface of the cabinet bottom can be used as the reference plane (See figure 2 and 3) The locking device allows the fixing of the drilling jig to the cabinet (see Detail C) By moving the template, the assembling of both the normal and inside drawers can be done. Moreover, an adjustability of up to 40mm is provided for inside Drawers (see Detail B) The drilling jig can be used for Smarbox, Smart Slide Single Extension, Smart Slide Full Extension, as well as Sambox drawer slides Assembling holes require a Ø2mm diameter drill Smart Drilling Jig with Ruler CODE SCREW PACKING SB Chipboard 1 set SB Euro 1 set SB Euro 1 set Figure 1 Figure 2 Disassembled Cabinets Assembled Cabinets Detail C Detail A Detail B Figure 3 Assembled Cabinets Sam Box Detail A Detail B Detail C Smart Slide Single Extension After adjusting the desired measures on the ruler, the position is fixed by screwing the hut (see figure 1) The adjustable template allows the assembling of both normal and inside Drawers. Scale needs to be on 0 position for normal drawers (see figure 1) The drilling jig is fixed by using the locking device as indicated by the arrows (see figure 2) Smart Slide Full Extension Smart Box 56
49 SAMET DRAWER (08) (03)
50 SAMET SAM BOX An Elegant & Simple Drawer for a Clean, Sleek Look Sam Box is the traditional drawer system released by Samet. Sam Box offers an economical yet aesthetically pleasing solution for your drawers. With varying heights and colours available plus a dynamic loading capacity of 25kg, Sam Box is well suited for use in kitchens, bathrooms and office furniture. 58
51 SAMET SAM BOX Practical Drawer Solutions Self-closing feature 3 different drawer side heights: 86, 118 and 150mm 250/300/350/400/450/500/550mm slide lengths Electrostatic paint; cream, black, white & metallic grey Durable steel runner with nylon rollers 25 kg. load capacity Safety pull-out stop system Horizontal and vertical front adjustment (08) sales@nessco.com.au (03) vicsales@nessco.com.au 59
52 SAMET SAM BOX 86MM Product Details Sam Box 86mm Aesthetic steel appearance Automatic closure system at a 70mm opening length Drawer Length: 300/350/400/450/500/550mm Finish: Electrostatic (White) Silent running wheel system The improved stability guarantees a long product durability Dynamic load capacity: 25 Kg Safety system to avoid derailing Vertical and horizontal adjustment opportunity ±1,5mm horizontal and ±1mm vertical adjustment opportunity 4 Sam Box Drawer Set Slide CODE LENGTH PRODUCT TYPE PACKING COLOUR SM x 300mm STD 10 Set / Ctn White SM x 350mm STD 10 Set / Ctn White SM x 400mm STD 10 Set / Ctn White SM x 450mm STD 10 Set / Ctn White SM x 500mm STD 10 Set / Ctn White SM x 550mm STD 10 Set / Ctn White Soft Close option for Sam Box now available. See pg 67 for more information. Decorative Cover CODE MATERIAL PACKING COLOUR SM Plastic 200 Pcs/Box White Connecting Fittings CODE MATERIAL SCREW PACKING SM Steel Countersunk 200 Pcs/Box SM Steel Ø 10mm 200 Pcs/Box 60
53 SAMET SAM BOX 86MM MINIMUM INTERNAL CABINET DIMENSIONS min. 24 min ,5 min. 5 8,5 MINIMUM DIMENSION REQUIREMENTS SLIDE SCREW LOCATION Drawer Back Panel Width = Cabinet Internal Width - 31mm Drawer Back Panel Height = Minimum 71mm (for 16mm chipboards) Drawer Wooden Floor Width = Cabinet Internal Width - 31mm Drawer Wooden Floor Length = Side Length - 1mm BACK PANEL APPLICATION 32 34,5 A xmm 9 * A= 34,5 - xmm Chipboard Back Dimensions (08) sales@nessco.com.au (03) vicsales@nessco.com.au 61
54 SAMET SAM BOX 118MM Product Details Sam Box 118mm Aesthetic steel appearance Automatic closure system at a 70mm opening length Drawer Length: 300/350/400/450/500/550mm Finish: Electrostatic (White) Silent running wheel system The improved stability guarantees a long product durability Dynamic load capacity: 25 Kg Safety system to avoid derailing Vertical and horizontal adjustment opportunity ±1,5mm horizontal and ±1mm vertical adjustment opportunity 4 Sam Box Drawer Set Slide CODE LENGTH PRODUCT TYPE PACKING COLOUR SM x 300mm STD 5 Set / Ctn White SM x 350mm STD 5 Set / Ctn White SM x 400mm STD 5 Set / Ctn White SM x 450mm STD 5 Set / Ctn White SM x 500mm STD 5 Set / Ctn White SM x 550mm STD 5 Set / Ctn White Soft Close option for Sam Box now available. See pg 67 for more information. Decorative Cover CODE MATERIAL PACKING COLOUR SM Plastic 200 Pcs/Box White Connecting Fitting CODE MATERIAL SCREW PACKING SM Steel Countersunk 200 Pcs/Box SM Steel Ø 10mm 200 Pcs/Box 62
55 SAMET SAM BOX 118MM MINIMUM INTERNAL CABINET DIMENSIONS min. 24 min min. 5 10,5 8,5 MINIMUM DIMENSION REQUIREMENTS SLIDE SCREW LOCATION Drawer Back Panel Width = Cabinet Internal Width - 31mm Drawer Back Panel Height = Minimum 103mm (for 16mm chipboards) Drawer Wooden Floor Width = Cabinet Internal Width - 31mm Drawer Wooden Floor Length = Side Length - 1mm BACK PANEL APPLICATION ,5 A 9 xmm 9 * A= 34,5 - xmm Chipboard Back Dimensions (08) sales@nessco.com.au (03) vicsales@nessco.com.au 63
56 SAMET SAM BOX 150MM Product Details Sam Box 150mm Aesthetic steel appearance Automatic closure system at a 70mm opening length Drawer Length: 300/350/400/450/500/550mm Finish: Electrostatic (White) Silent running wheel system The improved stability guarantees a long product durability Dynamic load capacity: 25 Kg Safety system to avoid derailing Vertical and horizontal adjustment opportunity ±1,5mm horizontal and ±1mm vertical adjustment opportunity 4 Sam Box Drawer Set Slide CODE LENGTH PRODUCT TYPE PACKING COLOUR SM x 300mm STD 5 Set / Ctn White SM x 350mm STD 5 Set / Ctn White SM x 400mm STD 5 Set / Ctn White SM x 450mm STD 5 Set / Ctn White SM x 500mm STD 5 Set / Ctn White SM x 550mm STD 5 Set / Ctn White Soft Close option for Sam Box now available. See pg 67 for more information. Decorative Cover CODE MATERIAL PACKING COLOUR SM Plastic 200 Pcs/Box White Connecting Fittings CODE MATERIAL SCREW PACKING SM Steel Countersunk 200 Pcs/Box SM Steel Ø 10mm 200 Pcs/Box 64
57 SAMET SAM BOX 150MM MINIMUM INTERNAL CABINET DIMENSIONS min min ,5 min. 5 8,5 MINIMUM DIMENSION REQUIREMENTS SLIDE SCREW LOCATION Drawer Back Panel Width = Cabinet Internal Width - 31mm Drawer Back Panel Height = Minimum 135mm (for 16mm chipboards) Drawer Wooden Floor Width = Cabinet Internal Width - 31mm Drawer Wooden Floor Length = Side Length - 1mm BACK PANEL APPLICATION ,5 A 9 * A= 34,5 - xmm Chipboard Back Dimensions (08) sales@nessco.com.au (03) vicsales@nessco.com.au 65
58 SAMET SAM BOX ACCESSORIES Product Details Sam Box Gallery Railing Profiles 8 Different sizes and 3 different color versions for dimensions between 250 mm and 600 mm The front panel can easily be assembled and adjusted The internal space can be divided as needed The internal space dividers are tool free adjustable Usable with Sambox metal and wooden drawers Adjustable Gallery Railing CODE LENGTH PACKING SM mm 20 Set SM mm 20 Set SM mm 20 Set SM mm 20 Set SM mm 20 Set SM mm 20 Set SM mm 20 Set SM mm 20 Set 2 - Gallery Railing CODE LENGTH COLOUR PACKING SM mm White 10 Pcs / Ctn 3 - Gallery Railing Single Adapter CODE C0LOUR PACKING SM White 50 Pcs / Box 200 Pcs / Ctn 4 - Gallery Railing Double Adapter CODE C0LOUR PACKING SM White 50 Pcs / Box 200 Pcs / Ctn Product Details Sam Box Folder Suspender The front panel can easily be assembled and adjusted The internal space can be divided as needed The internal space dividers are tool free adjustable Usable with Sambox metal and wooden drawers 4 Folder Suspender CODE LENGTH PACKING SM mm 20 Set SM mm 20 Set 66
59 SAMET SAM BOX DRAWER SOFT CLOSE MECHANISM Product Details Sam Box Drawer Soft Close Mechanism It is used to add soft closing function to Sam Box drawers Same product can be used at right and left sides It is advised to use two products for each drawer over 600mm Sam Box Soft Close Mechanism CODE C0LOUR PACKING SM Grey 20 Pcs DRIVE PART ASSEMBLY SOFT CLOSE MECHANISM ASSEMBLY DRAWER HEIGHT 54mm 86mm 118mm 150mm FITTING PINS (A) 26mm 58mm 90mm 122mm After the adjustment process is done, use the fixing screw to retain the mechanism. (08) (03)
60 LOBEK EXPRO SOFT CLOSE DRAWER SYSTEM Silent and Revolutionary "Lobek's Expro Box System will allow you to have all of the comfort and convenience of a soft close drawer to suit your budget. It features a 40kg weight rating and also height and side adjustment. There is also a range of accessories to suit the Lobek drawer to make the most out of your space." LOBEK Characteristic Alteration Lobek s Expro Soft Close Drawer Systems offer different solutions for differing storage needs, with varying depth and functionality. Optional accessories combine to make each draw a tailored solution designed to meet your needs. 68
61 LOBEK EXPRO 105MM HIGH DRAWER Product Details Expro 99mm High Drawers Soft close mechanisms Minimum height 105mm Expro Soft Close Drawer - 105mm CODE COLOUR LENGTH MIN. INSTALL LENGTH MIN. INSTALL HEIGHT LK270EXP105 White 270mm 280mm 105mm LK300EXP105 White 300mm 305mm 105mm LK350EXP105 White 350mm 355mm 105mm LK400EXP105 White 400mm 405mm 105mm LK450EXP105 White 450mm 455mm 105mm LK500EXP105 White 500mm 505mm 105mm LK550EXP105 White 550mm 555mm 105mm MAIN PACKAGE INCLUDES: 1x Drawer Roller Runners & Sides 1x Drawer Sides 2x Front Connectors 1x Rear Connectors BOTTOM & BACK PANEL MEASUREMENT 16MM DENSITY PANEL REQUIREMENT SPACE FOR DRAWER 2 1 LW Inside cabinet width 105mm LW 1 Bottom panel width = Inside cabinet width -75±0.5 Bottom panel length = Runner length -10mm 2 Back panel = 70mm Back panel = Inside cabinet width -84±0.5 NL+5mm NL: Nominal length RUNNER INSTALLATION Basic length : 300, 350, 400, 450, 500, 550 (08) sales@nessco.com.au (03) vicsales@nessco.com.au 69
62 LOBEK EXPRO 185MM HIGH DRAWER Product Details Expro 185mm High Drawer Soft close mechanisms Minimum height 185mm Expro Soft Close Drawer - 185mm CODE COLOUR LENGTH MIN. INSTALL LENGTH MIN. INSTALL HEIGHT LK270EXP185 White 270mm 280mm 185mm LK300EXP185 White 300mm 305mm 185mm LK350EXP185 White 350mm 355mm 185mm LK400EXP185 White 400mm 405mm 185mm LK450EXP185 White 450mm 455mm 185mm LK500EXP185 White 500mm 505mm 185mm LK550EXP185 White 550mm 555mm 185mm MAIN PACKAGE INCLUDES: 1x Drawer Roller Runners 1x Drawer Sides 2x Front Connectors 1x Gallery Railings 1x Rear Connectors BOTTOM & BACK PANEL MEASUREMENT 16MM DENSITY PANEL REQUIREMENT SPACE FOR DRAWER 2 1 LW Inside cabinet width 185mm LW 1 Bottom panel width = Inside cabinet width -75±0.5 Bottom panel length = Runner length -10mm 2 Back panel = 70mm Back panel = Inside cabinet width -84±0.5 NL+5mm NL: Nominal length RUNNER INSTALLATION Basic length : 300, 350, 400, 450, 500,
63 LOBEK EXPRO 225MM HIGH DRAWER Product Details Expro 225mm High Drawer Soft close mechanisms Minimum height 225mm Expro Soft Close Drawer - 185mm CODE COLOUR LENGTH OPTIONAL EXTRA MIN. INSTALL LENGTH MIN. INSTALL HEIGHT LK400EXP225 White 400mm 405mm 225mm LK450EXP225 White 450mm 455mm 225mm LK500EXP225 White 500mm 505mm 225mm LK550EXP225 White 550mm 555mm 225mm MAIN PACKAGE INCLUDES: 1x Drawer Roller Runners 1x Drawer Sides Infills CODE LENGTH COLOUR LK B-WH 500mm White 2x Front Connectors 1x Gallery Railings 1x Rear Connectors BOTTOM & BACK PANEL MEASUREMENT 16MM DENSITY PANEL REQUIREMENT SPACE FOR DRAWER 2 1 LW Inside cabinet width 225mm LW 1 Bottom panel width = Inside cabinet width -75±0.5 Bottom panel length = Runner length -10mm 2 Back panel = 70mm Back panel = Inside cabinet width -84±0.5 NL+5mm NL: Nominal length RUNNER INSTALLATION Basic length : 300, 350, 400, 450, 500, 550 (08) sales@nessco.com.au (03) vicsales@nessco.com.au 71
64 LOBEK DRAWER INSTALLATION INFORMATION Lobek Expro 105mm High Drawer Installation Guide Inside cabinet dimension Front panel mounting positions Front fixing bracket positions Back panel mounting positions B size overlay Front fixing bracket mounting Front panel removing Front panel height adjustment ±2mm Front panel side adjustment: right 1mm Front panel side adjustment: left 1mm Drawer mounting Drawer mounting Fuction of soft closing 72
65 LOBEK DRAWER INSTALLATION INFORMATION Lobek Expro 185mm & 225mm High Drawer Installation Guide Inside cabinet dimension Front panel mounting positions Front fixing brackets positions Back panel mounting positions B size overlay Front fixing brackets mounting Front panel removing Front panel height adjustment: ±2mm Front panel side adjustment: right 1mm Front panel side adjustment: left 1mm Drawer mounting Heightened draw-rod installing Drawer mounting Function of soft closing (08) sales@nessco.com.au (03) vicsales@nessco.com.au 73
66 SAMET & LOBEK ROLLER RUNNERS Drawer Roller Runner - White CODE DESCRIPTION CAPACITY LENGTH COLOUR DRSE250 Drawer Roller Runner 25kg 250 White DRSE300 Drawer Roller Runner 25kg 300 White DRSE350 Drawer Roller Runner 25kg 350 White DRSE400 Drawer Roller Runner 25kg 400 White DRSE450 Drawer Roller Runner 25kg 450 White DRSE500 Drawer Roller Runner 25kg 500 White DRSE550 Drawer Roller Runner 25kg 550 White Drawer Roller Runner - Black CODE DESCRIPTION CAPACITY LENGTH COLOUR DRSE250B Drawer Roller Runner 25kg 250 Black DRSE300B Drawer Roller Runner 25kg 300 Black DRSE350B Drawer Roller Runner 25kg 350 Black DRSE400B Drawer Roller Runner 25kg 400 Black DRSE450B Drawer Roller Runner 25kg 450 Black DRSE500B Drawer Roller Runner 25kg 500 Black DRSE550B Drawer Roller Runner 25kg 550 Black 74
67 DRAWER (08) (03)
ATTRACTION drawer. Twin-walled seel drawer. Complete. 50 Kilos resistance. indamatic. Range of concealed runners up to. self closing and soft closing.
F U R N I T U R E F I T T I N G S M A N U F A C T U R E R Twin-walled seel drawer. Complete Range of concealed runners up to 50 Kilos resistance. indamatic self closing and soft closing. Double wall 405
More informationSimple, practical and economical. Largest range on the market. SlowMotion Zeta optional
256 Affordable drawer system Simple, practical and economical Largest range on the market SlowMotion Zeta optional Uniset Uniset drawers are used by a very large base of Kitchen and bathroom manufacturers
More informationFURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS
www.hafeleindia.com FURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS ABOUT ITALIANA FERRAMENTA ITALIANA FERRAMENTA is specialized in the production of high quality accessories
More informationTheDrawerDepot.com DYNAPRO DYNAPRO SLIDE SYSTEM. The new generation of concealed undermount slides. Elegant, comfortable, and precision engineered.
TheDepot.com DYNAPRO DYNAPRO SLIDE SYSTEM The new generation of concealed undermount slides. Elegant, comfortable, and precision engineered. TheDepot.com TheDepot.com To create a product innovation is
More information14/08/15 AVAILABLE FROM MIDRAND RANDBURG DURBAN UMHLANGA MARGATE CAPE TOWN GHANA
4/08/5 AVAILABLE FROM MIDRAND RANDBURG DURBAN UMHLANGA MARGATE CAPE TOWN GHANA PINETOWN BALLITO KRABY DROP DOWN with Kimana Hinges (pg 3) For further information: www.italianaferramenta.com > CATALOGUE
More informationFURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS
www.hafeleindia.com FURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS ABOUT ITALIANA FERRAMENTA ITALIANA FERRAMENTA is specialized in the production of high quality accessories and ironmongery
More informationTable and Furniture Base Fittings Plinth Adjusting Fittings
Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.
More informationTRIADE MAXI TRIADE MAXI WOOD AND GLASS SHELVING SYSTEMS
is the concealed mounting bracket for shelves minimum 0mm thick. It has been conceived to simplify the shelf installation. It is provided with three indipendent adjustments: 1) VERTICAL Before installing
More informationKitchen Fittings Hanging Cabinets and Accessories
Cabinet hanger Knock-in version, load bearing capacity 130 kg/pair Depth adjustment Finish: Galvanized Concealed mounting of cabinet hanger behind the rear panel (Min. 16 mm free space required) Mounting
More informationOrganisational Kitchen Fittings Kitchen Cabinet Accessories
Kitchen waste bin systems Single waste bin, capacity 1 litres Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side panel Housing: Steel, plastic
More informationFurniture Fittings Concealed Hinges
Blum Clip Top Blumotion, opening angle 110 Material: Steel cup and arm : Screw fixing Installation: Door onto carcase without tools (Clip system) Adjustment: 3 dimensional (with appropriate mounting plate)
More informationDrawer slide technology with superior running conditions. Dynamic NT
slide technology with superior running conditions System Information The slide of the superlatives. Superior concealed roller bearing slides for wooden drawer boxes. Full Extension and Full Access slides
More informationCROWN IMPERIAL ASSEMBLY INSTRUCTIONS
CROWN IMPERIAL ASSEMBLY INSTRUCTIONS Standard Drawer Box Page 1 of 14 Standard Drawer Box Parts Parts Supplied B C D A E F G Page 2 of 14 Part Letter Part Name Quantity 300-600 Deep Pan A Base Panel 1
More informationMOVENTO. The Evolution of Motion
The Evolution of Motion is the latest advancement in concealed runner technology. It brings together all of the features, innovations and benefits that Blum has developed since first manufacturing drawer
More informationTried-and-tested quality.
Tried-and-tested quality. Rugged single and full-extension drawer slides in tried-and-tested quality for top requirements. www.grass.at, info@grass.eu Roller slides Tried-and-tested quality and functionality.
More informationwww.hafeleindia.com www.hafeleindia.com Silver Gold Rose Gold Graphite Dark Bronze PROFIN : ONE RANGE. MANY SOLUTIONS. 2. Stack Modular Shelving Pg. 23-32 3. Rail Door Profiles Pg. 33-41 1. Gola Profiles
More informationLIBRA H7 APPLICATIONS: SCREW FIXING and DOWEL FIXING WITH OPTIONAL ALUMINIUM BARS
LIBRA H7 APPLICATIONS: SCREW FIXING and DOWEL FIXING WITH OPTIONAL ALUMINIUM BARS BENEFITS OF LIBRA H7 HANGING SYSTEM: - Vertical and in-depth adjustments as well as the locking of the cabinet, can be
More informationBathroom Installation Guide
Bathroom Installation Guide Please read instructions carefully and check products before starting. Products should be fitted/installed by an experienced and competent fitter, failure to do so may invalidate
More informationGEZE SLIDING DOOR SYSTEMS
GEZE Perlan 140 Multi-faceted uses with individual accessories The discrete design supports every required room effect and makes the sliding door system with its accessories a guarantee for elegant and
More informationmetal sided pot drawer soft close
Follow these instructions to install your parts and accessories. Things you need to know lways read the full instructions prior to installation. Make sure you leave plumbing and electrical work to qualified
More informationTANDEM plus BLUMOTION
TANDEM plus BLUMOTION Premium Concealed Runners for Wood Drawers TANDEM plus BLUMOTION TANDEM plus BLUMOTION brings together all of the features, innovations and benefits that Blum has developed since
More informationCorner cabinet. Made for the corner!
Corner cabinet Made for the corner! How do you best use the corner spaces in the kitchen and integrate this into your overall design? Our answer: The new corner cabinet solution using full extension TANDEMBOX.
More informationCABINETRY Assembly Instructions
www.hdicabinetry.com Assembly Instructions TABLE OF CONTENTS Category Page(s) Section 1: Framed Series Base Cabinet Instructions Wall Cabinet Instructions Easy Reach Cabinet Instructions 1.01-1.04 1.05-1.06
More informationHinges and Flap Fittings Information
Information METALLAMAT Adjustment options Lateral adjustment Adjusting on concealed hinge + mm Height adjustment Via mounting plates adjusting ± 2 mm Depth adjustment Adjusting on concealed hinge + 4 mm,
More informationDesigning emotions. agantis XP. Harmonious proportions. Elegant lines. Dynamic forms.
Designing emotions agantis XP Harmonious proportions. Elegant lines. Dynamic forms. www.grass.at, info@grass.at 2 Designing emotions Focusing on the essential Dividing systems Drawer Pan drawers System
More informationv1.0 ASSEMBLY GUIDE Mia Wide Bookcase
v1.0 ASSEMBLY GUIDE Mia Wide Bookcase Components Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase.
More informationMOVENTO WITH BLUMOTION
MOVENTO WITH BLUMOTION - 760H/766H MOVENTO WITH BLUMOTION Space Requirement Concealed full extension with integrated BLUMOTION for silent and effortless closing action Synchronised feather-light glide
More information600mm 3 drawer base cabinet
Follow these instructions to build and attach your cabinet. Things you need to know ase cabinets come with different positions for attaching your. If you are choosing the rebated back option make sure
More informationCanterbury 4 DRW CHEST
Canterbury 4 DRW CHEST Assembly Instructions - Please save for future reference 553/4801 565/2178 572/6080 25 kg 55 lbs 9 kg 20 lbs max. Dimensions Width - 84.3cm Depth - 41.9cm Height - 99.7cm Important
More informationwww.hafeleindia.com www.hafeleindia.com INTRODUCTION Intuitive furniture is the need of the hour. In times like these where every extra square meter is considered as good as gold, installing versatile
More informationMOVEMENT SYSTEMS FITTINGS AND ACCESSORIES
MOVEMENT SYSTEMS FITTINGS AND ACCESSORIES We are where our customers are. Because we see customer proximity as an expression of our company culture. GRASS SOUTH AFRICA This catalogue consists of some products
More informationInnoTech drawer system
InnoTech drawer system Technik für Möbel 115 User-friendly and utterly stylish Uniquely different sleek design and fine materials The outside of the drawer profile is classically straight, the smoothly
More informationroom essentials >> assembly instructions Nightstand DCPI # (Black Woodgrain)
room essentials Nightstand DCPI # 249-05 - 0101 (Black Woodgrain) DCPI # 249-05 - 0104 (Espresso) DCPI # 249-05 - 0107 (Natural) DCPI # 249-05 - 0110 (White) >> assembly instructions 92331 F ROOM ESSENTIALS
More informationHeavy Duty Ball Bearing Drawer Slides Full Extension
301FU Series Heavy Duty Ball Bearing Drawer Full Extension Ordering Length 10 12 350mm 14 16 18 20 22 24 26 28 Zinc 301FU10 301FU12 301FU350 301FU14 301FU16 301FU18 301FU20 301FU22 301FU24 301FU26 301FU28
More informationDrawer Organisation Subject to technical modifications and changes to the range without notice
DRAWERS Faber AND cooker RUNNERS hoods Drawer Organisation.4 DRAWERS AND RUNNERS Blum ORGA-LINE for Standard Drawers Specially designed to suit the contoured sides of the Blum TANDEMBOX drawer, ORGA-LINE
More informationaluminium profile system
aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction
More informationSOLO Concealed Runners for wood drawers
SOLO Concealed Runners for wood drawers Perfecting motion Table of contents Application Chart Drawer Thickness Cabinet type Load Capacity 5/8" 3/4" Frame Panel Dynamic Static Page SOLO 262H 75 lb. 100
More informationPATENTED NO WELD SYSTEM!
PATENTED NO WELD SYSTEM! Patented no weld aluminium batten system Various batten sizes snap onto simple fixing clip Fit to face of walls and ceilings or between pillars or posts Cut to size system with
More informationA t l e t r e n r a n t a i t v i e v openings openings Aero
168 lternative openings ERO ero is the FGV alternative openings line. ero application confers a linear and high-end visual appeal to the furniture with a natural and impressive door movement. The complete
More informationSTANDARD. Drawer runner program. Perfecting motion.
STANDARD Drawer runner program Perfecting motion STANDARD drawer runners Table of Contents Blum STANDARD drawer runners apply proven technology built upon years of experience to ensure a solid performance
More informationFunctional movement systems for furniture in offices and public buildings. SINGLE-JOINT HINGES
SINGLE-JOINT HINGES Functional movement systems for furniture in offices and public buildings. QUALITY CERTIFICATE Reduced to the essentials. For us, that means focusing on quality, design and function.
More informationFD50-H SLIDING DOOR SYSTEM Installation Manual (Ceiling Mount Type for Pocket Door, with Dual Soft Close) Part No.FD50DHCP-PD
FD50-H SLIDING DOOR SYSTEM Installation Manual (Ceiling Mount Type for Pocket Door, with Dual Soft Close) Part No.FD50DHCP-PD Thank you for purchasing Sugatsune products. Read the instructions carefully
More informationLEGRABOX. Drawer Assembly and Removal. Drawer Assembly Step 1. Step 2. Step 3. Step 4. Step 5. Drawer Removal
Drawer Assembly and Removal Drawer Assembly Step 1 Measure inside cabinet width (ICW) Use inside cabinet width (ICW) to calculate the drawer bottom and back dimensions. Formulas are found on the specification
More informationAccessories. December Intelligent Solutions for the Furniture Industry. Interior Fittings Furniture Accessories Wardrobe Solutions
Accessories Interior Fittings Furniture Accessories Wardrobe Solutions Intelligent Solutions for the Furniture Industry December 2018 Durban Johannesburg Cape Town Port Elizabeth Contents FR Drawer Runners
More informationMADE IN GERMANY. Developed & Manufactured By. Drawer Runner System.
MADE IN GERMANY Developed & Manufactured By Drawer Runner System www.hafele.com MADE IN GERMANY Overview BASI SYSTEM Drawer sides with multi-functional benefi ts The Moovit drawer system provides completely
More informationCopyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax
Copyright 2003. Black Box Corporation. All rights reserved. 1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746 JULY 2003 RM3010A RM315-R2 RM323-R2 RM329 RM451 RM457 RM3020A RM316 RM324-R2
More informationAccessories. December Intelligent Solutions for the Furniture Industry. Interior Fittings Furniture Accessories Wardrobe Solutions
Accessories Interior Fittings Furniture Accessories Wardrobe Solutions Intelligent Solutions for the Furniture Industry December 207 Durban Johannesburg Cape Town Contents FR Drawer Runners Kitchen cabinet
More informationInterior Equipment/Shop Fittings
Interior Equipment/ Contents Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Hook-in profile Hook-in profile Eilox SHOPTEC Shopfitting system Wall channel Bracket Column Accessories
More informationGeneral Mounting/Installation manual 2019
General Mounting/Installation manual 209 Important, before you start! Read this manual thoroughly! Think about this before you start to mount. Note that this is a general mounting instruction! Pre-assemble
More informationFitted Furniture Installation and Aftercare Guide
Fitted Furniture Installation and Aftercare Guide Customer Service Contact Number 08008 778899 Important Information In the unlikely event that your product is damaged or faulty in any way, this must be
More informationUtensil sets. 15" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides. 21" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides
Utensil sets a 15" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides 11-5/8" 6-1/8" 4-1/4" 18" Drawer length ZHI.457FI1A 21" Drawer length ZHI.533FI1A 21" wide cabinets with 1-1/2" frames and
More informationZARGEN AND INTEGRA ZARGEN & INTEGRA STEEL DRAWER SYSTEMS.
ZARGEN AND INTEGRA ZARGEN & INTEGRA STEEL DRAWER SYSTEMS Zargen and Integra steel drawer systems provide flexibility to please the most demanding design needs. www.grassusa.com Zargen and Integra Drawer
More informationSimplex Baseboard System Baseboard System
Simplex Baseboard System Baseboard System I Complete installation programme I Trouble-free and time-saving installation I Various connection kits for all types of pipe Our service to you I Simplex Products
More informationASSEMBLY GUIDE. Mia Narrow Bookcase
ASSEMBLY GUIDE Mia Narrow Bookcase Components: Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase. Step
More informationSTANDARD 430E Series. Bottom mounted full extension drawer runners 430E E E E E E E E E4000
STANDARD 430E Series Bottom mounted full extension drawer runners Specifications Runner 430E8000 430E7500 430E7000 430E6500 430E6000 430E5500 430E5000 430E4500 430E4000 430E3500 430E3000 430E2500 Nominal
More informationGO STEEL STEEL FURNITURE. Mile End Office Furniture
GO STEEL Mile End Office Furniture GO STEEL FURNITURE www. mileendofficefurniture.com.au Mile End Office Furniture 107 Henley Beach Road, Mile End SA 5031 Australia t. +618 8229 7676 f. +618 8234 1618
More informationTHE COMPLETE CABINET
THE COMPLETE CABINET ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE WELCOME TO ONE-STOP SHOPPING. THE ONLY ALUMINUM DOOR PROGRAM YOU LL NEED. This is
More informationTHE COMPLETE CABINET
THE COMPLETE CABINET ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE WELCOME TO ONE-STOP SHOPPING. THE ONLY ALUMINUM DOOR PROGRAM YOU LL NEED. This is
More informationMODEL 9301E. Extra Heavy Duty Full Extension Drawer Slide Up to 600-lb. [272 kg.] Load Rating Optional Accessory Platform Brackets*
1 MODEL 9301E APPLICATIONS: This versatile slide is designed for use in a variety of heavy-duty storage applications. Please preview the application information provided on the following pages for further
More informationthe slim retracting clothesline product manual
&6 the slim retracting clothesline product manual for 4 and 6-line models HLS0046_4-6 line_owners Manual_v6.indd 1 2 Introduction Congratulations Congratulations on the purchase of your new Hills slim
More informationWaste/recycle sets. Waste/recycle sets Premium TANDEM and TANDEMBOX solutions for waste/recycle cabinets. blum.com
Waste/recycle sets Waste/recycle sets Premium TANDEM and TANDEMBOX solutions for waste/recycle cabinets blum.com Waste/recycle solutions for every kitchen Blum s new TANDEM and TANDEMBOX waste/recycle
More informationACCESSORIES. Wooden Dowels. Fasteners. Miscellaneous. Shelf Supports
ACCESSORIES ACCESSORIES Fasteners PMI has a variety of Fasteners and Connectors for any application. Euro-Bolts, Spiral Cam Connectors, Screws and Sleeves - we have your solution! Shelf Supports Assorted
More informationAVENTOS HK-XS. Small fitting, great convenience.
AVENTOS HK-XS Small fitting, great convenience www.blum.com 2 Small fitting high quality AVENTOS HK-XS is the compact fitting for small stay lifts in high and wall cabinets. Thanks to the narrow style,
More informationAVENTOS lift system. AVENTOS HL lift up. Smooth motion for the lift up. Opening and closing easy and comfortable
lift system Smooth motion for the lift up With HL, the one-part front lifts up parallel to the cabinet. This lift system is ideal for applications in high and wall cabinets with fronts above or in larder
More informationAVENTOS. An inspiring range of lift systems.
AVENTOS An inspiring range of lift systems www.blum.com 2 Ease of motion multitude of options The AVENTOS lift system brings ease of motion to the wall cabinet. Even large and heavy lift systems can be
More informationTechnical product descriptions WORKTOPS STANDARD SLIM LINE. 1. Material thickness 38 mm. 2. Core/substrate material Chipboard
Technical product descriptions WORKTOPS I STANDARD 1. 38 mm 2. Chipboard 3. Surface material Laminate (CPL, HPL) 4. Laminate thickness 0,6-0,8 mm 5. Surface structure Wood pore or relief, matt, gloss 6.
More informationAir - the truly concealed hinge
Air Air - the truly concealed hinge Air is an innovative and functional concealed hinge system, characterized by sophisticated design, compactness and very high performance qualities. Like traditional
More informationMOVENTO. The Evolution of Motion For 1/2" Drawer Material Thickness
The Evolution of Motion For 1/2" Drawer Material Thickness is the latest advancement in concealed runner technology. It brings together all of the features, innovations and benefits that Blum has developed
More informationSTANDARD. Drawer runner program. Perfecting motion. blum.com
STANDARD Drawer runner program blum.com Perfecting motion Proven technology - built upon years of experience Blum testing criteria Cycle life/dynamic load capacity test Side pressure test 100,000 open/close
More informationBAKA Protect Serie 2000 / Protect. BAKA Protect Series 2000 / The adjustable hinge system for timber entrance doors
Protect Serie 2000 / 4000 Protect BAKA Protect Series 2000 / 4000 The adjustable hinge system for timber entrance doors index BAKA Protect 2D BAKA Protect 2010 2D two-dimensionally adjustable up to 120
More informationWaste/recycle sets. Waste/recycle sets. Premium TANDEM and TANDEMBOX solutions for waste/recycle cabinets. blum.com
Waste/recycle sets Waste/recycle sets Premium TANDEM and TANDEMBOX solutions for waste/recycle cabinets blum.com SERVO-DRIVE BLUMOTION Waste/recycle solutions for every kitchen Blum s new TANDEM and TANDEMBOX
More informationStandard drawer runner program
Standard drawer runner program i 230M Single extension, Blumatic self-closing drawer runners s: 250mm (10") to 650mm (26") 230 series drawer runners Cabinet profile Drawer profile Rear mount sockets available
More informationScandi - 3 Door 5 Drawer Wardrobe
Scandi - 3 Door 5 Drawer Wardrobe Assembly Instructions - Please keep for future reference 02250 Dimensions Width : 0.9 cm Depth : 9.0 cm Height: 9.3 cm Assembly Instructions - Please keep for future reference
More informationTechnical Documentation Lift Advanced
Technical Documentation Lift Advanced 1 1 Introduction... 4 2 Basic Information... 5 2.1 Hinge Recommendations... 5 Lift Advanced HF... 5 Lift Advanced HK... 5 2.2 Usage of Aluminium Fronts... 5 19mm Aluminium
More informationLocks and Catches Catches and Furniture Bolts
Magnetic catch with low noise closure Material: Plastic housing Version: with closed surface and internal magnet, magnets no viewable : Press fixing Pull 0. kg, for drilling hole Ø8 mm white 26.01.701
More information4+2 chest of drawers. Please read these instructions before use and retain for future reference. Produced in the Czech Republic
4+2 chest of drawers Please read these instructions before use and retain for future reference If you need help with this product, please contact our helpline on Freephone 0870 10 1490 Your statutory rights
More informationLift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge
Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge Pivot door
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION P 1 / 11 Model No. Description CONCEPT AND MAIN APPLICATIONS Specification Standard equipment TCT saw blade... 1 Rear table set (exclusively Europe, Turkey, South Africa..1 2704 This
More informationPREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
PROFILE SYSTEM PRE-ASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS s r ood gni d i l s dna gni t f i l r o f s t neme l e de l bme s s a - er P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS MINITEC
More informationFunctional Hardware HINGES:
Functional Hardware»» One Stop Shop for all cabinet manufacturing hardware including hinges, slides, screws, door bumpers, shelf pins, catches and more»» Third Party Testing on hinges and slides to meet
More informationFOLDING POCKET DOOR SYSTEM ALT-F Installation Manual
FOLDING POCKET DOOR SYSTEM ALT-F Installation Manual Thank you for selecting our product. Before starting installation, please read this manual thoroughly to ensure correct installation. Please keep this
More informationSB-WM-ART2-L-BL SB-WM-ART2-XL-BL
SB-WM-ART2-L-BL SB-WM-ART2-XL-BL Weatherproof Universal Dual-Arm Articulating Mount for Large TVs INSTALLATION MANUAL WARNING The maximum weight of this wall mount is 150 lbs (68.04 kg). Use with heavier
More informationHinge Systems. Our technology adds movement and flexibility to furniture.
Our technology adds movement and flexibility to furniture. Hinge Systems Without the fitting, any item of furniture, no matter how attractive, fails to fulfill its purpose. This is the Hettich experience.
More informationproduct assembly installation
product assembly installation The I-Channel design is a proven and matured technology from Harn. New fabrication process has led to Straighter, Smoother Finishing & Stronger Channel. The new I-Channel
More informationSection 1. Kitchen installation. Base cabinets
Section 1 Kitchen installation Base cabinets Pre-build - Cabinet leg... page 16 Pre-build - Alternative cabinet leg... page 18 Pre-build - Cabinets.... page 19 Pre-build - Corner base cabinet centre upright
More informationCloset System Installation Manual
Closet System Manual Thank you For choosing our Custom Closet Collection to fit all your needs Closets come fully assembled to make your project an enjoyable and satisfying experience. With quality Custom
More informationLeveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
More informationScandi - 2 Door 2 Drawer Tallboy
Scandi - Door Drawer Tallboy Assembly Instructions - Please keep for future reference 00 Dimensions Width : 8. cm Depth : 49.0 cm Height: 5.9 cm Assembly Instructions - Please keep for future reference
More informationMerloni Elettrodomestici. Technical Fitting Manual FRIDGE. Language Issue/Edition Page GB /
GB 99-11-03/01 1-38 Index 1 CONFORMITY OF APPLIANCE 3 2 MAIN ASSEMBLY TYPES 3 2.1 Under worktop 3 2.2 Double door 10 2.3 Combined 14 2.4 Single door Fridge or single door Freezer 19 2.5 Combined free-standing
More informationInstallation Instructions
by Plato Woodwork Installation Instructions Plato Woodwork, Inc. 200 Third Street SW P.O. Box 98 Plato, MN 55370 www.platowoodwork.com 800.328.5924 SECTION GUIDE GETTING STARTED PAGE # Installation Methods...
More informationroom essentials >> assembly instructions H 1 4 drawer chest DPCI # (Black Woodgrain) DPCI # (Espresso)
room essentials 4 drawer chest DPCI # 249-05 - 0103 (Black Woodgrain) DPCI # 249-05 - 0106 (Espresso) >> assembly instructions 92335 H 1 FREE! Do not go back to your store! we will help you! Missing or
More informationTransition Range Installation, Care & Adjustment Instructions
Introduction The following instructions will enable you to complete the final assembly and adjustment of your new furniture. Hardware Box Each of the cabinets contains a Hardware box that contains all
More informationCirco Kids. >> assembly instructions E. Loft Bed (incl. solid pine slats) DPCI # (White) DPCI # (Chocolate)
Circo Kids Loft Bed (incl. solid pine slats) DPCI # 242-17 - 9390 (White) DPCI # 242-17 - 9391 (Chocolate) >> assembly instructions 92346 E 1 2 Congratulations on your latest Target purchase Don't start
More informationFunctional movement systems for furniture in offices and public buildings. SINGLE-JOINT HINGES
SINGLE-JOINT HINGES Functional movement systems for furniture in offices and public buildings. QUALITY CERTIFICATE Reduced to the essentials. For us, that means focusing on quality, design and function.
More informationInstallation Instructions Tailgate Rack Bracket
Installation Instructions Tailgate Rack Application: Jeep Wrangler 1986 Current Part Number: 41411 www.bestop.com - We re here to help! Visit our web site and click on Ask a Question. Click here for more
More informationConnector Technology, Shelf Supports Connection Fittings
MODULAR Connection fitting for recess mounting Finish: Burnished : For recess mounting The plate should allways be installed so that the supporting plate butts against the end of the recess. For rapid
More informationALUMINUM. Fence Systems. Made. in the USA
Aluminum Fence Systems Gates and Hardware Made in the USA ALUMINUM M Fence Systems Lifetime Warranty KeyLinkFencing.com Table of Contents Gates and Hardware 3 Morgan Accessories 3 4000 Series 4 & 5 2000
More informationSTORAGE & SHELVING SYSTEM - INSTALLATION GUIDE
STORAGE & SHELVING SYSTEM - INSTALLATION GUIDE If you have ordered storage drawers, shelving, hanging rails or shoe racks this guide will help you install your storage and shelving system, together with
More informationDoor Hinges Drill-in Hinges
Drill-in hinge StarTec Frame part For timber lining frames For rebated doors Maintenance-free friction bearing To use in combination with receiver Max. door weight: 40 kg Knuckle: Ø15 mm Drilling bit Ø7.2
More informationMedia Storage Systems Fixed Media Cabinets
Owner s Manual Media Storage Systems Fixed Media Cabinets Contents 1-Column Fixed Media Storage Cabinet Important User Information...........................2 Safety Precautions.................................3
More information