8900 Mortise Lock Exit Device 80 Series
|
|
|
- Darrell Harrell
- 6 years ago
- Views:
Transcription
1 8900 Mortise Lock Exit Device 8900 Series Mortise Lock Exit Device Specifications for 8900 Mortise Lock Exit 8900 Features Designed for standard width stile applications on wood and metal doors Concealed single point guarded latching for additional security Also available as a WS8900 for additional certifications and listings, see Hurricane-Resistant section of this catalog Single door applications Double door applications with Vertical Rod Devices are ANSI A156.3 UL Fire and Panic listed Door Types Rail sizes as determined by door width C908 Standard Strike Curved lip ANSI A Handed. (32mm) lip standard Wood or metal 1-3/4" (44 mm) minimum thickness. For doors over 1-3/4" to 2-1/4" thick, specify thickness and order as 31- Option 4-1/2" (114mm) minimum stile Rails are available in 4 sizes, use door width to determine size needed. Rails will be factory cut to size, if door width is supplied E Rail for 24" to 32" door widths, No cutting required for 32" door F Rail for 33" to 36" door widths, No cutting required for 36" door J Rail for 37" to 42" door widths, No cutting required for 42" door G Rail for 43" to 48" door widths, No cutting required for 48" door Strike C908 Standard Black Nylon Coated ANSI Prep A115.1 Optional Strikes 815 Open Back Strike or 908 Flat Lipped Strike with Black Nylon Dogging Feature Hex key dogging standard on non fired rated devices; specify 16- for cylinder dogging (#41 cylinder supplied) Electric AL- Alarm BT- Beacon PL- SARGuide Photoluminescent Coated TL- SARGuide Illuminated Touchpad 53- LX Latchbolt Monitor 54- Outside Lever Monitoring 55- Request-to-Exit Signal - Rail Monitoring 56- Remote Latch Retraction 57- Delay Egress & Electromagnets 58- Electric Dogging 59- Electroguard Self Contained Delayed Egress Mounting Fasteners Supplied standard with wood and machine screws with through-bolts and mortise (sex) nuts Latch Bolt Brass Nickel Plated, 3/4" (19mm) throw, anti-friction Guarded/DeadLatch Brass Nickel Plated, sliding type Device Centerline 41" (1041mm) for Standard Applications from ed Floor Center Case Dimensions 8-3/8" (213mm) x 2-5/8" (67mm) Projection Pushbar Neutral 3" (76mm) Pushbar Depressed 2-1/8" (54mm) Fire Exit Hardware See Chart Page 3 (32mm) 3-3/8" (86mm) Longer lips in increments of 1/4" (6mm) through 2-7/8" (73mm) available Black nylon 4-7/8" (124mm) coated (32mm) 3/32" (2mm) Single Door Pair of Doors Trim 815 Open back strike; Inactive door with vertical rods Trim 815 Open Back Strike 4-7/8" (124mm) (32mm) 3-3/8" (86mm) ANSI A Open Back Beveled 1/8" (3mm) in 2" (51mm) Specify hand of active door Black nylon coat B label 9
2 8900 s & Trims How to order: Series Rail Lgth Trim Hand Outside Door Width F F ETL RHR " 700 Series ET Trim Exits with ET Trim, specify lever design after the ET designation (e.g., ETL) Lever Designs for ET Controls A, B, E, F, J, L, P, W Also available with Coastal Series & Studio Collection Levers ET with Suffix (Used to order ET without device) 8900 Series: 704, 706, 710, 713, 715, 716, 740, 743, 744, 773, 774, 775 & 776 Freewheeling Trim The lever rotates when the door is locked preventing excessive force from being applied to the horizontal lever Electrified ET Trim and Electrified Mortise Locks Voltage must be specified for the following functions: 73, 74, 75 and 76. Specify: 12VDC or 24VDC Pull & Thumb Piece Trim Section 10 ANSI Description & Cylinder Info (1-3/4" Door) ANSI Type Panic & Fire x ET_ #46 Cylinder Supplied Key unlocks Trim, Trim retracts Latch/ Trim relocks when key is removed 8906 x ET_ #41 Cylinder Supplied No outside operation (No Cylinder) Note: Exit devices are available in all standard finishes, except 14, 15, 26 & 26D. With these finishes, exit devices are supplied in 32 or 32D to match accordingly. 26 or 26D is automatically supplied when 32 or 32D is specified. For nickel finishes, specify 14/32 or 15/32D to receive nickel finished trims and stainless exit devices without cylinder is available as a 73 ** 76 without cylinder is available as a 74 Description & Cylinder Info. (1-3/4" Door) No outside operation (No Cylinder) ET Control is used as Pull Only 8910 x ET_ #41 Cylinder Supplied 8913 x ET_ Passage Only (No cylinder) 8915 x ET_ ** ANSI Key Outside Retracts Latch; Key Unlocks/Locks O/S Trim O/S #46 & I/S #34 Cylinder Supplied No outside Operation (No Cylinder) Dummy Trim #41 Cylinder Supplied Electrified ET Trim - Fail Safe Power Off, Unlocks Lever, Electrified ET Trim - Fail Secure Power Off, Locks Lever, Trim s Use three letter designations (Ex PTB ) when ordering the Exit Device with trim Use the six digit designation (Ex 866-MAL ) when ordering trim without an Exit Device, always specify finish & hand - #41 Cylinder Supplied 814-FLL 814-FLW 814-MAL 814-PTB 814-STS No O/S Operation or Cylinder (Pull Only) 810-FLL 810-FLW 810-MAL 810-PTB 810-STS Passage Only (No cylinder) 828-FLL 828-FLW 828-MAL 828-PTB 828-STS #41 Cylinder Supplied 866-FLL 866-FLW 866-MAL 866-PTB 866-STS Key Outside Retracts Latch; Key Unlocks/Locks Trim; 866-FLL 866-FLW 866-MAL 866-PTB 866-STS O/S #34 & I/S #41 Cylinder Supplied Note: Thumb piece trims for 63 and 66 function devices are identical and are identified as 66 function when trim is ordered separately. Note: FLW trim is not available in 32(629) or 32D(630) Note: Thumb piece trims used with 8900 mortise lock exit devices are handed x ET_ 8940 x ET_ 8943 x ET_ 8944 x ET_ 8975 x ET_ 8976 x ET_ Series 8900 Panic & Fire 8904 x Trim 8910 x Trim 8928 x Trim 8963 x Trim 8966 x Trim 8900 Mechanical : HK BC AL- BT- CPC- LD- PL- SG- TL- Cylinder : UL P P P P P- 73-7P F F BR- LC- *SC- *SE- * are not available with the following functions: 04 x ET, 16, 44, 75 & B 10BE 10BL D 26 26D 32 32D BHMA E
3 Mechanical & Descriptions Mechanical : Categories How to Specify Detailed Description Fire Rated 12- UL Fire Label Exit hardware (not available with 16- & HK-) SVR Bolt 14- Sliding bolt bottom case for 8700 Cylinder Dogging 16- Cylinder lockdown with # 41 Cylinder & # 97 Ring (not available with 12-, 57, 59-, AL- or BT- Option) LD- Less dogging for non fire rated devices Less Touch Pad 19- Pushbar without Lexan touchpad (not available TL-) 8900/8300 Strike /8" (124mm) ANSI flat lip strike (for 8900 & 8300 Series Mortise Lock Exit Devices) Doors over 1-3/4" and/or Panels (Specify door thickness, panel thickness & location as required) Not available for HC8700, FM8700, PP, PR & SP8700, PP, PR & SP8600, LP, LR & LP8700 Extended lip strike supplied for 8300 & 8900 Series Security Fasteners 36- Six lobe security head screws 37- Spanner head screws Flush End cap 43- Flush End Cap (Not available with LP, LR & LS Devices) 53- Latchbolt monitoring switch (not available with 59-, GL-, HC-, WS- or on FM8700, PP/PR/SP8600 & LP/LR/LS8600 Exit Devices) 54- Monitors ET Lever movement with Internal micro switch in ET Control 55- Request to Exit - Signal Switch in Rail (not available with 59- & FM8700) 56- Remote Latch Retraction (not available 57-, 58-, 59-, AL- or BT- Option) 56-HK- Remote Latch Retraction with manual Hex Key dogging (not available 12-, 57-, 58-, 59-, AL- or BT- Option) Electrical Tactile Warning Protection Delayed Egress (Electromagnetic Lock required & purchased separately) (not available 16-, 53-, 56-, 56-HK, 58-, 59-, AL, Bc-59 - or BT, GL, TL Prefixes) ( NB, 54- are available on request) 58- Electric Rail Dogging (Not available 56- & 59-) AL- Thick Doors BC-59- BT- TL- Electroguard Self Contained Delayed Egress Device (not available with 16-, 53-, 55-, 56-, 57-, 58-, AL-, BT-, GL-, HC- & WS Option Prefixes, PP/PR/SP8600, LP/LR/LS8600 Exit Devices) (NB, 54- are available upon request) Alarmed Exit (Not available 16-, 56-, 57-, 59-, BT-, GL-, HC- & WS-) Electroguard Boca Code (Door Status Switch required) (not available with 16-, 55-, 56-, 57-, 58-, AL-, BT-, GL-, HC- & WS- and on NB8700, PP/PR/SP8600 & LP/LR/LS8600 Exit Devices) Beacon- Emergency Audio & Visual egress system with a self contained Laser, Flashing LEDs & Audio alert (not available FM8700 Devices & theses 16-, 56-, 57-, 59-, BC59- and AL) SARGuide Electro-Luminescent Touchpad (not available 19-, 85-, 87- & PL-) 76- Tactile Warning - Milled Outside Lever (not available with Studio & Coastal Levers and the A Lever) 85- Tactile Warning - Abrasive strip on Push Rail (Not available with PL- & TL-) 86- Tactile Warning - Abrasive coating on Outside Lever 87- Tactile Warning - Abrasive strip on Push Rail & Abrasive coating on Outside Lever (not available with PL- & TL-) CPC- SG- Clear Powder Coat ( for 32 & 32D ) MicroShield antimicrobial clear powder coat Top Rod Only NB- Less Bottom Rod & Bolt (for SVR & CVR Devices) Guarded Latch GL- Guarded Latch for Rim Exit Devices (not available 53-, 56-, 59-, AL-, HC- & WS-) SARGuide PL- SARGuide PL Photoluminescent Coated Push Rail (Touchpad eliminated) (not available 85, 87 & TL-) Through Bolts TB- Through Bolts for 8300, 8500, 8600, 8700, 8800 & 8900 Devices 79
4 How to Order Example Order: F ETMR 12VDV RHR 26D 32D 36" 84" 41" Device Type Rail Size Trim Voltage Hand Listing Pgs Mortise WS89 - Mortise 04 - Night Latch 06 - Night latch E 24"-32" F 33"-36" 88 - Rim 10 - Dummy J 37"-42" HC88 - Rim 13 - Classroom G 43"-48" WS88 - Rim 15 - Passage 16 - Rail Sizes 87 - SVR Entrance Listed Below 28 - TP are for LP, LR NB87 - SVR Passage & LS Devices 40 - Only HC87 - SVR FW Dummy 43 - FW FM87 - SVR L 36" Door Classroom 44 - FW MD86 - CVR M 42"-44" 46 - FW AD86 - CVR N 46"-48" 62 - TP WD86 - CVR 63 - TP 85 - Rim Narrow Classroom MD84 - CVR 66 - TP Narrow Entrance How to Order Exit Devices For ET trim specify ET followed by Lever design, See pages For Thumb Piece Trims and Pulls specify Trim as specified by Device Type 12VDC 24V0DC Voltage required for Controlled s - 73, 74, 75 & 76 RHR LHR Outside page 81 page 81 Door Width If door width is supplied rails will be cut to size Opening Height Required for Vertical Rod Exit Devices AFF Center Line of Rail Above Floor 41" Standard AD84 - CVR Narrow 83 - Mortise Narrow PP87 - CTL SVR PR87 - CTL SVR SP87 - CTL SVR PP86 - CTL CVR PR86 - CTL CVR SP86 - CTL CVR LP86 - CTL CVR LR86 - CTL CVR LS86 - CTL CVR 73 - Fail Safe 74 - Fail Secure 75 - Fail Safe w/cyl 76 - Fail Secure w/cyl Legend AD - Aluminum Door HC - Hurricane Code AFF - Above Floor MD - Metal Door CTL - Center & Top Latching Exit NB - No Bottom Rod CVR - Concealed Vertical Rod SVR - Surface Vertical Rod ET - External Lever Trim TP - Thumb Piece Trim FM - FEMA WD - Wood Door FW - Freewheeling Trim WS - Windstorm Mounting Heights 41" (1041mm) from finished floor for standard application 38" (965mm) from finished floor for elementary schools and to meet local accessibility standards when a 100 or 300 Series Auxiliary Control is used (38" AFF must be specified) Hand Left Hand Reverse LHR Outside Right Hand Reverse RHR 81 Door Opening Height 1/8" (3mm) Door 1/4" (6mm) Stop Height ed Floor
5 and Care # BHMA# Description How to clean Avoid these cleaners Polished brass, clear coated Satin brass, clear coated Polished bronze, clear coated Satin bronze, clear coated Mild non-abrasive detergent with damp cloth or sponge 10B 613 Oxidized bronze, oil rubbed 10BE 613E Dark oxidized satin bronze, equivalent 10BL 614 Oxidized satin, bronze, clear coated 14** 618** Polished nickel, clear coated Lemon oil polished with dry cloth 15** 619** Satin nickel, clear coated 20D 624 Statuary dark bronze, clear coated 26** 625** Polished chrome 26D** 626** Satin chrome 32** 629** Polished stainless steel ** Exit devices are available in all standard finishes, except 14, 15, 26 & 26D. With these finishes, exit devices are supplied in 32 or 32D to match accordingly. 26 or 26D is automatically supplied when 32 or 32D is specified. For nickel finishes, specify 14/32 or 15/32D to receive nickel finished trims and stainless exit devices. Note: FLW & FSW are NOT available in 32 or 32D To avoid discoloration and pitting: Keep stainless steel away from contact with other metals Avoid cleaning with mineral acids or chlorine products Avoid cleaning with abrasive products like sandpaper or steel wool To maintain the finish: Remove any contamination before damage occurs Protect with a metal polish or car wax 82 Mild non-abrasive detergent with damp cloth or sponge 32D** 630** Satin stainless steel Plastic pad or bronze wool Cleaners, solvents, bleach, steel wool
Exit Device 5820 SERIES GRADE 1 PUSH BAR SPECIFICATIONS HEAD COVER OPTIONS STRIKES APPLICATION.
Exit Device 5820 SERIES GRADE 1 PUSH BAR 5820F Fire-Rated Mortise Lock Exit Device 5820FSF Failsafe Electric Mortise Exit Device 5820FS Failsecure Electric Mortise Exit Device HEAD COVER OPTIONS HC-1 HC-2
7100(F) series. A conventional exit device for single swing doors or pairs of doors of metal, wood or composite construction.
Page Revised Electronically 12/12 7000 series architectural exit devices introduction Yale 7000 series exit devices deliver an unparalleled combination of durability, breadth of line, innovation and aesthetics.
7100(F) series. A conventional exit device for single swing doors or pairs of doors of metal, wood or composite construction.
Page Revised Electronically 12/12 7000 series architectural exit devices introduction Yale 7000 series exit devices deliver an unparalleled combination of durability, breadth of line, innovation and aesthetics.
7100(F) series. A conventional exit device for single swing doors or pairs of doors of metal, wood or composite construction.
Page Revised Electronically 12/12 7000 series architectural exit devices introduction Yale 7000 series exit devices deliver an unparalleled combination of durability, breadth of line, innovation and aesthetics.
3000 Series Exit Devices Premier Product
00 000 Series Exit Devices Premier Product Certification & Compliance: ANSI/BHMA A56., Grade ANSI A7. Accessibility Code Underwriters Laboratories (UL and CUL) listed for accident hazard (panic) standard.
55 Series. Exit device
55 Series Exit device Introduction The proper selection and application of exit hardware, in addition to safety, are major concerns to all responsible manufacturers. Exit devices are a critical part of
55 Series Exit Device
55 Series Exit Device 55 Exit Devices Index Introduction........................................................................... 3 Exit Hardware Rim device............................................................................
8000 SERIES SERIES HEAVY-DUTY MODELS
GRADE 1 ARCHITECTURAL TYPE EXIT DEVICES 8000 SERIES SERIES HEAVY-DUTY MODELS FEATURES All devices are non-handed design Slight pressure on device touch bar will retract latch(s) for immediate exit Auxiliary
2100 series exit devices. rugged reliability
rugged reliability Yale 2100 introduction It s no secret that the 2100 series flatbar exit device has a reputation as the right choice for meeting the rigors of demanding industry segments. The quality
Introduction Exit Hardware Rim device... 4 Surface mounted vertical rod device... 6 Mortise lock device... 5
88 Exit Device INDEX Introduction... 3 Exit Hardware Rim device... 4 Surface mounted vertical rod device... 6 Mortise lock device... 5 Fire Exit Hardware Rim device... 7 Surface mounted vertical rod device...
88 Series. Exit device
88 Series Exit device Introduction The proper selection and application of exit hardware, in addition to safety, are major concerns to all responsible manufacturers. Exit devices are a critical part of
1800 Series. Flatbar Exit Devices. An ASSA ABLOY Group brand
, BC V3L 3B1, BC V3A 8A7, BC V3B 7W3, BC V6G 2M6 1800 Series Flatbar Exit Devices An ASSA ABLOY Group brand , BC V3L 3B1, BC V3A 8A7, BC V3B 7W3, BC V6G 2M6 introduction Yale 1800 series exit devices are
ED3000 Series. Exit Device Parts Manual
ED3000 Series Exit Device Parts Manual Table of Contents Functions...3 ED3200 Series Rim Exit Device...4 ED3200A Series Rim Exit Device - Fire Rated...5 ED3400 Series Surface Vertical Rod Exit Device...-7
4200 Series. Commercial Exit Device
4200 Series Commercial Exit Device 4200 SERIES COMMERCIAL EXIT DEVICE SUGGESTED ARCHITECTURAL SPECIFICATIONS RIM All exit devices shall be American Eagle 4200 Series rim or surface vertical rod devices.
88 Series. Exit device
88 Series Exit device Introduction Your trusted solution Our brand s reputation, respect and legacy stem from that first exit device in 1908 and they continue because of the quality of Von Duprin products
PUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20
Flat Goods Section TABLE OF CONTENTS EXIT DEVICES PUSH BAR EXIT DEVICES N1500 Heavy Duty Rim Exit Device N1550 Rim Exit Device... 6 N1650 Fire Rated Heavy Duty Exit Device N1700(F) Vertical Rod Heavy Duty
Mortise Locks. Narrow Mortise Locks Series NML Features Ordering String Functions Trim Sets Cylinders Strikes Specifications
2 Mortise Locks 2 b 3 4 6 16 28 29 30 Narrow Mortise Locks Series NML Features Ordering String Functions Cylinders Strikes Specifications 2016 02 FSB North America Narrow Mortise Lock NML Series Quality
ED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS
ED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS Ver.2 1300 SERIES CONCEALED VERTICAL ROD DEVICE Top Strike Latch Screws Strike Screws Release Plunger Top Latch Plunger Screws
An ASSA ABLOY Group brand Series. Flatbar Exit Devices
An ASSA ABLOY Group brand 1800 Series Flatbar Exit Devices Page revised electronically 7/16 1800 series grade 1 exit devices introduction Yale 1800 series exit devices are the ideal choice for economy
Installation Instructions
VON DUPRIN Installation Instructions 98/9947WDC Concealed Vertical Rod Exit Device Wood Door Applications Devices covered by these instructions: 98/9947WDC Concealed Vertical Rod Device 98/9947WDC-F (Fire)
BEST Access Solutions, Inc East 75th Street Indianapolis, IN Phone: Fax:
6161 East 75th Street Indianapolis, IN 46250 Phone: 855-365-2407 Fax: 317-595-7614 www.precisionhardware.com Certified Exit Devices and Trim ANSI/BHMA A156.3 2014 PRECISION Products ANSI Type Device Type
OVERVIEW. Mounting Post (2 places) Cylinder Cam. Handing Pin
DEVICES COVERED IN THIS DOCUMENT: 46CE Cylinder Escutcheon Key locks and 46DT Dummy Trim Pull when dogged unlocks lever 46BE Blank Escutcheon Always operable 46NL Night Latch Key retracts latchbolt 46NK
930 Series Mortice Exit Device
930 Series Mortice Exit Device BS EN 1125:1997+A1:2001 Classification Code 37601322B The Adams Rite 930 Series Mortice Exit Device is a life safety device which is designed to fit timber or hollow steel
INPACT 94 AND 95 Series Exit Device
INPACT 94 AND 95 Series Exit Device America s most preferred exit devices. Von Duprin exit devices are famous for their innovative design and meticulous engineering. There s simply no substitution. That
Monarch XX Series. Crossbar Exit Device
Monarch XX Series Crossbar Exit Device THE FALCON DIFFERENCE S A F E T Y, S E C U R I T Y A N D U N C O M P R O M I S I N G V A L U E At Falcon, we know that every product you sell not only has to meet
33/3547A. Special tools needed: #10-24 tap Drill bits: #25, 5/16, 13/32, 1/2
911404-00 Concealed Vertical Rod Exit Device 33/3547A Installation Instructions Devices covered by these instructions: 33/3547A and 33/3548A Concealed Vertical Rod Exit Device 33/3547A-F and 33/3548A-F
ED8000 Series. Pushpad Exit Devices Parts Manual
ED8000 Series Pushpad Exit Devices Parts Manual Table of Contents ED8200A Rim Exit Device...4 ED8200(B) Rim Exit Device...6 ED8400A Surface Vertical Rod Exit Device...8 ED8400 Surface Vertical Rod Exit
INPACT 94 and 95. Exit device
INPACT 94 and 95 Exit device Introduction The unquestioned leader in innovation, design and durability. Von Duprin invented the exit device in 1908. Since that time, there have been many imitators, but
98/9927. Devices covered by these instructions: Surface Vertical Rod Exit Device
911375-00 Surface Vertical Rod Exit Device 98/9927 Installation Instructions Devices covered by these instructions: 98/9927 Surface Vertical Rod Exit Device 98/9927-F (Fire) Surface Vertical Rod Exit Device
Bravura. UL Listed Commercial Locksets FORGED. Designs from Great European Homes. Fall 2009
Designs from Great European Homes FORGED UL Listed Commercial Locksets Fall 2009 Many hotel, condo, apartment and office projects require locks with a UL fire rating. offers both tubular and mortise locks
MEETS ADA REQUIREMENTS!
PUSH / PULL LATCH HL-6 MEETS ADA REQUIREMENTS! HL-6/EO EXIT ONLY LATCH HL-6/EO Exit Only Latch for applications where only one side of door is used for exit or entry. Ideal for situations where the security
ED5800 (A) Series. Installation Instructions. Concealed Vertical Rod. Exit Device WARNING
Strike Shim (2) Supplied Strike Plate (3) 10-24 x 3/4" PFHMS (6) 10-24 x 1/2" PFHMS Top Latch TopTube Concealed Vertical Rod Exit Device Important: For use with metal doors only. Device is packed ready
Tubular Latches. 3 a. Heavy Duty Lever Latches Series HLL Features Ordering String Functions Dummy Mounts Trim Sets Specifications
3 Tubular Latches 3 a 3 4 6 8 12 14 Heavy Duty Lever Latches Series HLL Features Ordering String Functions Dummy Mounts Specifications 2016 02 2 FSB North America Heavy Duty Lever Latch HLL Series Quality
20 Series Exit Devices Accessories Mullions & Door Kits
20 Series Exit Devices Accessories s & Kits 980 Removable Bottom (2438mm) stock size Up to (3000mm) size 2-1/2" 1-1/2" 1-1/4" 3" 507 Adapter for Narrow Transom Bars Required when soffit is 1-1/4" to 2"
For installation assistance, contact SARGENT at DOORS SHOWN HERE SWING IN FOR ILLUSTRATION PURPOSES ONLY.
SARGENT Installation Instructions for LP8600 x LR8600 & 12-LP8600 x 12-LR8600 Series Low Profile Panic and Fire Exit Devices on Double Egress & Double Doors or LS8600 & 12-LS8600 Low Profile Exit Device
INSTALLATION INSTRUCTIONS FOR ARCHITECTURAL VALUE SERIES ELECTRIC DOGGING / ELECTRIC LATCH RETRACTION AND "H" MODELS (HURRICANE) Endcap P/N:
103104 January 20, 2009 INSTALLATION INSTRUCTIONS FOR ARCHITECTURAL VALUE SERIES ELECTRIC DOGGING / ELECTRIC LATCH RETRACTION AND "H" MODELS (HURRICANE) ED Electric Dogging ER ELECTRIC LATCH RETRACTION
Cross bar. Exit devices
Cross bar Exit devices Table of contents 4 XX-R Series 5 F-XX-R Series 6 XX-V Series 7 F-XX-V Series 8 XX-M Series 9 F-XX-M Series 10 XX-C Series 11 F-XX-C Series 12 1990 Series 13 2090 Series 14-16 Accessories
Mortise Locks. European Mortise Locks Series EML Features Ordering String Functions Trim Sets European Profile Cylinders Specifications
2 Mortise Locks 2 c 3 4 6 9 22 24 European Mortise Locks Series EML Features Ordering String Functions Trim Sets European Profile Cylinders Specifications 2016 02 2 FSB North America European Mortise Lock
33/3527A. Devices covered by these instructions: 33/3527A-F (Fire) Surface Vertical Rod Exit Device
*911403-00* 911403-00 Surface Vertical Rod Exit Device 33/3527A Installation Instructions Devices covered by these instructions: 33/3527A Surface Vertical Rod Exit Device 33/3527A-F (Fire) Surface Vertical
Product Catalog. hardwaresuppliers.com
Product Catalog hardwaresuppliers.com 800-334-5625 2 TABLE OF CONTENTS 22 Series... Pages 3-4 33A & 35A Series... Page 5 88 Series... Pages 6-7 98 Series... Page 8 99 Series... Pages 9-11 X98/99 Series...
BEFORE STARTING INSTALLATION
VON DUPRIN Installation Instructions 22 Rim Device Devices covered by these instructions: 22 Rim Device 22-F Fire Exit Rim Device BEFORE STARTING INSTALLATION 1. Check hardware schedule for strikes, fasteners,
Monarch 18 Series. Touch Bar Exit Device
Monarch 18 Series Touch Bar Exit Device THE FALCON DIFFERENCE S A F E T Y, S E C U R I T Y A N D U N C O M P R O M I S I N G V A L U E At Falcon, we know that every product you sell not only has to meet
Tubular Deadbolts. Deadbolt Series HDD Features Ordering String HDD Functions Trim Sets Suggested Specification
4 Tubular Deadbolts 3 4 6 8 17 Deadbolt Series HDD Features Ordering String HDD Functions Trim Sets Suggested Specification 3 12 14 16 17 Keyed Deadbolt Series KDD Features Ordering String KDD Functions
M O R T I S E L O C K S
MORTISE LOCKS lock design M certification / compliance Locks comply with UL 10B, Fire Tests of Door Assemblies, and UL 10C, Positive Pressure Fire Tests of Door. Door Assemblies and the Uni form Building
NM SERIES. Extra Heavy Duty Mortise Locks Grade 1
NM SERIES Extra Heavy Duty Mortise Locks Grade 1 1 Auxiliary latchbolt Available with Interchangeable Core. Electrified Locks available upon request. 2 N SS TS JS GS 4 4 ¾ 5 ¼ 4 ¾ 2 9 /16 2 2 15 /32 2
Adams Rite. Standard & Heavy Duty Deadlatches Series Heavy Duty Deadlatch
Standard & Heavy Duty Deadlatches 4900 Series Heavy Duty Deadlatch Function: Flexibility of traffic control and installation is offered by the 4900 Series Deadlatches. A reverse turn of the key while bolt
Note: Use 1 Order Form per Buying Program (1 Week or 3 Week Contract) based on the availability of the product
7 & 10 Line Parts Please Program Required Note: Use 1 Order Form per Buying Program (1 Week or 3 Week Contract) based on the availability of the product Ordering Form: 10 Line Parts 10 Line Parts - Description
* * 98/9950WDC. Fire-Rated Devices include these. additional components. 1-Point Latch (LBL)
*24739468* 24739468 98/9950WDC Installation Instructions 1-Point Latch (LBL) Fire-Rated Devices include these additional components Metal Edge Wrap required for 60 and 90-minute applications 2-Point Latch
1530(F) Mortise Exit Devices Installation Instructions
1530(F) Mortise Exit Devices Installation Instructions Singe Doors or Pairs (2) 12-12-24 PFHUM/WS 798 Universal Strike Standard Device Package Devices are packed ready for application reinforced metal
Where plans come together.
Where plans come together. MORTISE LOCK Performance You Can Plan On. Taking a facility from architectural blueprint to completed project can be a complicated process. Decisions have to be made, deadlines
Decorative Lever Designs
Decorative Lever Designs 3 & C 4 & K 12 14 & D 15 & A 16 & B 17 50 51 52 53 54 55 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 2 www.stanleysecuritysolutions.com
1.8. Panic Exit Devices. ED22 Series, ED2227 Series, ED22M Series, Accessories and Parts. Mechanics
1.8 Panic Exit Devices ED22 Series, ED2227 Series, ED22M Series, Accessories and Parts Mechanics OCTOBER 2014 Panic Exit Devices Kaba Panic Exit Devices provide a fast and convenient means of escape in
Adams rite. Deadbolts, Deadlocks & Hookbolts Series maximum security laminated deadlocks/hookbolts
1850 Series maximum security laminated deadlocks/hookbolts dams rite Deadbolts, Deadlocks & Hookbolts For single leaf doors where the gap between door and jamb is large ccepts standard mortise cylinder
33/35A Series. Devices covered by these instructions: Rim Exit Device. CD33/35A Rim Exit Device EL33/35A Rim Exit Device SS33/35A Rim Exit Device
911402-00 Rim Exit Device 33/35A Series Installation Instructions Devices covered by these instructions: 33/35A Rim Exit Device CD33/35A Rim Exit Device EL33/35A Rim Exit Device SS33/35A Rim Exit Device
4600 Series Rim Narrow Stile Exit Device Installation Instructions I-ED01162
DEVICES COVERED IN THIS DOCUMENT: 4600 Series Rim Panic Narrow Stile Exit Device 4600 Series Rim Fire Narrow Stile Exit Device OVERVIEW Outside of Door RHR LHR Inside of Door APPLICATIONS 4950 BLADE STOP
Safety glasses Measuring tape Level Pencil Power drill Center punch Phillips screw driver Saw horse
EX76 Concealed Vertical Rod Exit Device Preparation Guide and Installation Instructions Box Contents EX76 Concealed Vertical Rod Exit Device Back Bar Active Push Bar Filler Plate Door Kit with Templates
Hookbolt. Non Handed. Flat LH Bevel RH Bevel Radius Radius with Weather-strip. Radius Flat Bevel
Mortise Locks deadlatch Deadbolt Hookbolt Function: Deadbolt, Hookbolt, Deadlatch Backset: 31/32", 1-1/8", 1-1/2" Face Plate: 1"W x 6-7/8" L - Aluminum Case Dimensions: 7/8"W x 6"L x Depth specific to
Basic Technical Fundamentals of Builders Hardware Exit Devices
Copyright 2002, 2009, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Page SARGENT History................................................... 1 What is
Trim & Auxiliary. Table of Contents
Trim & Auxiliary At Hager Companies, we know all about the importance of adding the finishing touches to your building projects. That s why we re proud to offer more than 200 different trim & auxiliary
7110(F), 7170(F)(LBR) Surface Vertical Rod Exit Device Series Installation Instructions
7110(F), 7170(F)(LBR) Surface Vertical Rod Exit Device Series Installation Instructions Shim (2) Supplied Strike Plate 791 Strike (3) 10-24 x 3/4 (19mm) PFHMS Strike Angle Must Engage Strike 12-24 FHPMS
Deadlatch 451 Series. Faceplates - Deadlatch. Strikes - Deadlatch. DeadLatch for Aluminum Stile Doors. Non-Handed. 451 NC0772 1¹ 8 Backset Deadlatch 4
Mortise Locks 185 Series Mortise Locks for Aluminum Stile Doors. Non-Handed. 185 NA0019 1¹ 8 Backset Deadbolt HB185 NB0123 Faceplates - Deadbolt FP-DB-F-NH-628 NE0000 Flat FP-DB-F-NH-313 NE0001 FP-DB-B-RH-628
ED5200(A) Series Rim Exit Devices
ED5200(A) Series Rim Exit Devices Installation Instructions (Single Doors or Pairs with Mullion) FM156 4/10 (617350602) For Metal, Composite and Wood Doors of Either Hand End Clamp (3) 8-32 x 5/16" Flat
ARCHITECTURAL DOOR HARDWARE ROLLER LATCHES, PADDLE HANDLES, DOOR HANDLES & BARS CATALOG
ARCHITECTURAL DOOR HARDWARE ROLLER LATCHES, PADDLE HANDLES, DOOR HANDLES & BARS CATALOG January 1, 2017 v3 West Coast Office (800) 544-4422 East Coast Office (800) 225-6737 intldoorclosers.com Index ROLLER
P-8200 Triad. 33 Point Security Mortise Lock
33 Point Security Mortise Lock P-8200 Triad Copyright 2004, 2007, 2009, 2011, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the
World s Leading Manufacturer Of Traffic Doors. Supplemental Instructions for the Single and Double Door Order Form
World s Leading Manufacturer Of Traffic Doors Supplemental Instructions for the Single and Double Door Order Form World s Leading Manufacturer Of Traffic Doors 2809 SW th Street Redmond, OR 97756 Phone:
Steel Hawk 4300 Electrified Deadlatch (elatch)
STEEL HAWK 4300 ELECTRIFIED DEADLATCH (ELATCH) DA-1 STEEL HAWK 4300 ELECTRIFIED DEADLATCH (ELATCH) Steel Hawk 4300 Electrified Deadlatch (elatch) Operation Turn key, apply voltage, or operate handle or
5400LN series cylindrical lever locks. rugged yet refined
rugged yet refined Designed for industrial, commercial and institutional use, the Yale 5400LN Series heavy-duty cylindrical lockset offers no compromise when it comes to rugged reliability and performance.
INSTALLATION INSTRUCTIONS CRL JACKSON
INSTALLATION INSTRUCTIONS CRL JACKSON 2085 CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0250 ORDER OF ASSEMBLY
Hardware Fitting Accessories Bolts
Lever action flush bolt With slide Width: 19 mm Stroke (a): 25 mm 1 Flush bolt 1 Set of fastening material With lever arm Width: 19 mm Stroke (a): 18 mm 1 Flush bolt 1 Set of fastening material Stainless
INSTALLATION INSTRUCTIONS CRL JACKSON
INSTALLATION INSTRUCTIONS CRL JACKSON 3185 MID-PANEL CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0252 ORDER
Headline. Push/Pull Latches
Headline Push/Pull Latches Quality hardware for superior door control 2 Glynn-Johnson has been providing the highest quality door control hardware for 75 years. Glynn-Johnson uses only state-of-the-art
No. 059FL. No. 251FL. No. 260FL. No. 305RE. Etruscan Bronze. Florentine Brass. Siena Brass (D) All designs available in these finishes.
SINCE 1964 No. 059FL No. 251FL No. 260FL No. 305RE 2 Etruscan Bronze (ETR) Florentine Brass (D) Siena Brass (BAS) Venetian Nickel (BPS) All designs available in these finishes. No. 309RE No. 331FL No.
Table of Contents Holders & Stops
Copyright 2003, 2007, 2009-2018, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Overview.... 1 General Information.... 2 Features and Details.... 3 590
Headline Push/Pull Latches
Push/Pull Latches Quality hardware for superior door control Glynn-Johnson has been providing the highest quality door control hardware for over 75 years. Glynn-Johnson uses only state-of-the-art technology
Shim (2) Supplied. Strike Plate. (3) x 5/8" PFHMS or 10 x 1" PFHWS. Top Latch. (3) x 1/4" PRHMS. Latch Cover. (2) 8 x 3/8" PFH AB SMS
Installation Instructions ED5400 (A) Series ED5470 (B) Series Surface Vertical Rod Exit Devices Strike Angle Must Engage Strike Top Strike 10-24 PFHMS Top Bracket and Strike required for ED5470. Shim (2)
4000 Series. The Gainsborough 4000 Series Heavy Duty Cylindrical Locksets KEY IN KNOB LOCKSETS
The Gainsborough 4000 Series Heavy Duty Cylindrical Locksets are designed and manufactured for use in commercial buildings, including hotels and offices, but are also ideal for residential entrances and
SERIES 6000 ELECTRIC STRIKES
SERIES 6000 ELECTRIC STRIKES Electric Strikes provide remote release of a locked door. They allow the door to be opened without retracting the latchbolt. This occurs by the releasing of the electric strike
TOOLS REQUIRED Metal Wood Wood and Metal Screws. #16 Drill #12-24 Tap. 1/8 Drill
DEVICES COVERED IN THIS DOCUMENT: 4700S Surface Vertical Rod Device 4700SF Fire Exit Surface Vertical Rod Device TOOLS REQUIRED Metal Wood Wood and Metal Screws Sex Bolts #7 Drill ¼ -20 Tap #16 Drill #12-24
9875-F/9975-F Mortise Lock Fire Exit Device
9875-F/9975-F Fire Exit 575 Strike 9875-F/9975-F fire exit mortise lock devices for all types of single doors up to 4 x 10 (1219mm x 3048mm) or 8 x 10 (2438mm x 3048mm) double doors installations, UL listed
7130(F) Series Mortise Exit Devices Installation Instructions
7130(F) Series Mortise Exit Devices Installation Instructions Outside Trim Device is packed ready for any Yale 650F or 660F Series Trim. End Clamp (3) 8-32 x 5/16" PUFHMS End Cap (2) 1/4-20 x 1" PPHMS
DOOR TECHNOLOGY ORDER CATALOG SECTION SECURY Automatic Door Lock & Gripset Handle
DOOR TECHNOLOGY ORDER CATALOG SECTION 03.3 SECURY Automatic Door Lock & Gripset Handle Table of Contents 03.3 SECURY Automatic Door Lock & Gripset Handle SECURY Automatic Door Lock...03.3.5 Automatic
Endcap P/N: X. Endcap Bracket P/N: Endcap Bracket with 9V battery holder P/N: Fillerplate SubAssembly
101256 April 20, 2007 Detex Corporation, 302 Detex Drive, New Braunfels, Texas 78130-3045 (830)629-2900 / 1-800-729-3839 / Fax (830)620-6711 E-MAIL: detex@detex.com INTERNET: www.detex.com INSTALLATION
Note: The dimensions of the Template are shown in inches. See attached page for the Metric Conversion Table for millimeters.
801 Avenida Acaso, Camarillo, Ca. 93012 (805) 494-0622 www.sdcsecurity.com E-mail: service@sdcsecurity.com These instructions are presented a in step by step sequence. Please read it through before installation.
MANUFACTURER & WHOLESALER OF WINLY PRODUCTS
MANUFACTURER & WHOLESALER OF WINLY PRODUCTS June 2018 ARCHITECTURAL, DESIGNER, BUILDER HARDWARE CONTENTS Finish Codes Entrance Handlesets & Lever Plate Entrance Handlesets 02 03 Multipoint Lock Gear and
Lockset Program. North American Manual
Lockset Program North American Manual North American Manual About FSB Designer Series Lockset Program Lever, Knob and Trim Designs Sliding Door Hardware Door Pulls and Glass Door Hardware Accessories Window
ED5200S(A) Series ED5200S(A) Series x M107 Windstorm Series SecureBolt Exit Device
ED5200S(A) Series ED5200S(A) Series x M107 Windstorm Series SecureBolt Exit Device Installation Instructions FM532 3/11 (Single Doors or Pairs with Mullion) For Doors of Either Hand In U.S.: Corbin Russwin,
PANIC & EXIT HARDWARE
CI/SfB (32) Xt7 PANIC & EXIT HARDWARE Uncompromising safety 2 CEN Standards European CEN Standards 1997. There are two standards. - Where panic situations can be foreseen and occupants of the building
STANDARD-DUTY CYLINDRICAL LOCKSETS 5300 SERIES CATALOG LOCK CYLINDRICAL
5300 SERIES 5300 CYLINDRICAL LOCK CATALOG STANDARD-DUTY CYLINDRICAL LOCKSETS BUILT TO LAST Yale 5300 Series standard-duty cylindrical locksets offer a unique combination of positive security, trim design
Active Push Bar. Safety glasses Measuring tape Level Pencil Power drill Drill bits: 5/32, 3/4 Center punch Phillips screw driver
EX88 Interlocking Rim Exit Device Preparation Guide and Installation Instructions Box Contents EX88 Interlocking Rim Exit Device Back Bar Filler Plate Active Push Bar Cylinder and Trim Interface Kit Mounting
PRL GLASS PANIC HANDLES DOOR MANUAL PL100 PANIC HANDLE PL100-A SERIES. For all glass doors
DOOR MANUAL PL100 PANIC HANDLE SERIES For all glass doors Content of this manual: DOOR FABRICATION ( panic handle installation ) - page 3 Parts list, tools & supplies required Installation of handle to
Note: Use 1 Order Form per Buying Program (1 Week or 3 Week Contract) based on the availability of the product
7 & 10 Line Parts Please Program Required Note: Use 1 Order Form per Buying Program (1 Week or 3 Week Contract) based on the availability of the product Ordering Form: 10 Line Parts 10 Line Parts - Description
STANDARD KEYWAYS T SERIES PREMIUM KEYWAYS RESTRICTED KEYWAYS
I started Marshall Best Security Corporation in 2004 in order to continue a long family tradition of providing high quality locking products with unequaled customer service at competitive prices. The innovative
LT Series. Decorative tubular locks
LT Series Decorative tubular locks Put your confidence in the consistency of Schlage The LT Series gives you the quality you can count on from Schlage. LT Series decorative tubular locks are built from
Table of Contents Holders & Stops
Copyright 2003, 2007, 2009-2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Overview.... 1 General Information.... 2 How to Select Product... 3 Options,
Contents. The undisputed leader in door accessory hardware /ING BuyLine 2600
08 71 00/ING BuyLine 2600 STEELCRAFT The undisputed leader in door accessory hardware. For more than 120 years Ives has produced a full line of top quality building hardware that delivers the utmost application
98/ Customer Service # Dogging Key (use to lock down pushbar)
911373-00 Rim Exit Device 98/99 Installation Instructions Dogging Key (use to lock down pushbar) Customer Service 1-877-671-7011 www.allegion.com/us Allegion 2014 Printed in U.S.A. 911373-00 Rev. 05/14-f
Installation Instructions for 45H & 47H Mortise Locks
Installation Instructions for 45H & 47H Mortise Locks Contents These installation instructions describe how to install your 45H & 47H Mortise Lock. Topics covered include: Finishing the preparation...
Table Of Contents. Warranty Terms and Conditions
Table Of Contents Warranty... Exit Devices - Mechanical and Electrified Concealed Vertical Rod (CVR) - 28 Series...2 Rim Exit Devices - 29 Series...2 Electrified Concealed Vertical Rod (CVR) and Rim Devices...3
* * 22 & 22-F. Please give these instructions to building owner after device is installed BS EN 1125 : 2008
*911407-00* Rim device 911407-00 22 & 22-F Installation Instructions BS EN 1125 : 2008 Devices covered by these instructions: 22 Rim Exit Device 22-F Rim Fire Exit Device These instructions are presented
INSTALLATION INSTRUCTIONS CRL JACKSON
INSTALLATION INSTRUCTIONS CRL JACKSON 1285 CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0248 ORDER OF ASSEMBLY