Architectural Nylon. Architectural. Nylon
|
|
|
- Arleen Hodge
- 6 years ago
- Views:
Transcription
1 Architectural Nylon Architectural Nylon
2
3 Contents Paris Series Pull Handles and Accessories
4 Architectural Nylon HOPPE nylon levers and pull handles are manufactured to exacting standards from polyamide nylon giving good tensile properties, impact strength and wear resistance. nylon gives good antistatic behaviour and resistance to corrosion and chemicals. HOPPE nylon levers are available in both solid and steel cored versions. The steel cored version being suitable for fi re doors. Full Profile Spindle Lever Handle Spindle The spindle is very easily introduced into the lever Introduce grub screw into hole. The grub screw point must locate into the slot in the spindle where it will bore a hole Once fi tted correctly this will achieve solid fi xing Spindles: HOPPE Full Profile Spindle HOPPE nylon levers are supplied with full profi le spindles. HOPPE full profi le spindles have a tension spring running the full length of the spindle. In screwing the lever handle grub screw into the slots in the middle of the spring, the tension spring expands achieving a secure fi x to the lock follower. Maintenance HOPPE nylon furniture can be cleaned with water and or propriety detergents. Colours F1004 Golden Yellow LRV: F3003 Red (Rouge) LRV: 7.97 F3005 Claret (Burgundy) LRV: 4.84 F5002 Cobalt Blue LRV: 5.09 F5003 Midnight (Dark) Blue LRV: 4.85 F6016 Green (Viridian) LRV: F7043 Flint (Dark) Grey LRV: 9.49 F7506 Manhattan Grey LRV: F8017 Brown (Sienna) LRV: 4.97 F9016 Diamond White LRV: F9017 Black (Ebony) LRV:
5 The Disability Discrimination Act BS8300 Document M The DDA is an Act of Parliament dealing with Human Rights Legislation, making it unlawful to discriminate against anyone on grounds of any disability whether permanent or temporary. BS8300: 2001 Design of buildings to meet the needs of disabled people Code of Practice. This provides guidance on good practice in the design of buildings so that access is convenient for all. Approved Document M (Doc M) of the building regulations (England and Wales), requires that reasonable provision shall be made for people to gain access to and use the building and its facilities. Lever Handles Lever handles should be of the return to door type. They do not have to be round bar. They should not have sharp edges or immediate changes of direction. They should be securely fi xed to door by bolt through fi xings and with minimum dimensions as stated in the diagram. Min. 95mm Inside Secure Bolt Fix Min. 45mm Min. 19mm diameter Pull Handles Pull handles should be bolt fi xed to door and have roses to aid the partially sighted. Minimum dimensions are stated in the following diagram. The upper fi xing should be a minimum of 1400mm above fl oor level. Pull handles can be longer but not shorter than these dimensions. Kick Plates To prevent damage to doors from wheelchairs, kick plates should be at least 400mm high. Tonal Contrast To assist the partially sighted, door furniture should contrast with the door, by a minimum of 20 points. This so called light refl ectance value is measured on a scale of 0 to 100 with pure black being 0 and pure white 100. Hardware and door manufacturers should be able to give the value (from 0 to 100) of their products. Min. 400mm Min. 45mm 19mm to 35mm diameter 1400mm 1000mm Cold to the touch External handles should not be cold to the touch. Nylon, wooded and powder coated handles or handrails will satisfy this, but not metal versions. 271
6 Architectural Nylon 272
7 Paris Series
8 Paris Series HOPPE Paris Series K138 Solid Nylon Lever on Round Rose (unsprung) Ø 21mm Supplied with wood screw fi xings Supplied with 8mm x 105mm full profi le spindle (630905) Suitable for 38mm to 47mm door thickness NOT to be used on Fire Doors Suitable for use with ARRONE Plus escape locks 8 ø21 standards and certification Conformity Statement: Meets the dimensional recommendations of BS8300 and Approved Document M AR600/10 Lever on round rose Comprising AR600L lever and AR600R rose AR600/10/20 Spring cassette for above (single) Steel Cored Lever on Round Rose (unsprung) Ø 21mm Supplied with wood screw fi xings Supplied with 8mm x 105mm full profi le spindle (630905) Suitable for 38mm to 47mm door thickness Suitable for use on Fire Doors Suitable for use with ARRONE Plus escape locks ø21 standards and certification Conformity Statement: Meets the dimensional recommendations of BS8300 and Approved Document M AR600/20 Lever on round rose Comprising AR600SCL steel cored lever and AR600R rose AR600/10/20 Spring cassette for above (single) 274
9 HOPPE Paris Series K138 Solid Nylon Lever on Radius Plate (unsprung) Ø 21mm Supplied with wood screw fi xings Supplied with 8mm x 105mm full profi le spindle (630905) Suitable for 38mm to 47mm door thickness NOT to be used on Fire Doors standards and certification Conformity Statement: Meets the dimensional recommendations of BS8300 and Approved Document M AR600/11 AR600/12 Long plate latch furniture (AR600PLA plate and AR600L Lever) Lock furniture (AR600PLO plate and AR600L Lever) ø21 AR600/13 AR600/13-72 AR600/14 AR600/15 AR600/15-78 Euro profi le lock furniture 47.6mm centres (AR600PP plate and AR600L Lever) Euro profi le lock furniture 72mm centres (AR600PP-72 plate and AR600L Lever) Oval profi le lock furniture 48.5mm centres (AR600PO plate and AR600L Lever) Bathroom furniture 57mm centres (AR600PB plate and AR600L Lever) Bathroom furniture 78mm centres (AR600PB-78 plate and AR600L Lever) LATCH LEVER KEY EURO OVAL BATHROOM 275
10 Paris Series HOPPE Paris Series K138 Steel Cored Lever on Radius Plate (unsprung) Ø 21mm Supplied with wood screw fi xings Supplied with 8mm x 105mm full profi le spindle (630905) Suitable for 38mm to 47mm door thickness Suitable for use on Fire Doors standards and certification Conformity Statement: Meets the dimensional recommendations of BS8300 and Approved Document M 9 ø AR600/21 Long plate latch furniture (AR600PLA plate and AR600SCL Lever) AR600/22 AR600/23 AR600/23-72 AR600/24 AR600/25 AR600/25-78 Lock furniture (AR600PLO plate and AR600SCL Lever) Euro profi le lock furniture 47.6mm centres (AR600PP plate and AR600SCL Lever) Euro profi le lock furniture 72mm centres (AR600PP-72 plate and AR600SCL Lever) Oval profi le lock furniture 48.5mm centres (AR600PO plate and AR600SCL Lever) Bathroom furniture 57mm centres (AR600PB plate and AR600SCL Lever) Bathroom furniture 78mm centres (AR600PB-78 plate and AR600SCL Lever) LATCH LEVER KEY EURO OVAL BATHROOM 276
11 Solid Nylon Levers on Rectangular Plate (unsprung) Ø 21mm HOPPE Paris Series K138 Supplied with wood screw fi xings Supplied with 8mm x 105mm full profi le spindle (630905) Suitable for 38mm to 47mm door thickness NOT to be used on Fire Doors standards and certification Conformity Statement: Meets the dimensional recommendations of BS8300 and Approved Document M AR600/31 AR600/32 Long plate latch furniture (AR6/11 plate and AR600L Lever) Lock furniture (AR6/12 plate and AR600L Lever) ø21 AR600/33 AR600/33-72 AR600/34 AR600/35 AR600/35-78 Euro profi le lock furniture 47.6mm centres (AR6/13 plate and AR600L Lever) Euro profi le lock furniture 72mm centres (AR6/13-72 plate and AR600L Lever) Oval profi le lock furniture 48.5mm centres AR6/14 plate and AR600L Lever) Bathroom furniture 57mm centres (AR6/15 plate and AR600L Lever) Bathroom furniture 78mm centres (AR6/15-78 plate and AR600L Lever) LATCH LEVER KEY EURO OVAL BATHROOM 277
12 Paris Series HOPPE Paris Series K138 Steel Cored Levers on Rectangular Plate (unsprung) Ø 21mm Supplied with wood screw fi xings Supplied with 8mm x 105mm full profi le spindle (630905) Suitable for 38mm to 47mm door thickness Suitable for use on Fire Doors standards and certification Conformity Statement: Meets the dimensional recommendations of BS8300 and Approved Document M 9 ø AR600/41 Long plate latch furniture (AR6/11 plate and AR600SCL Lever) AR600/42 AR600/43 AR600/43-72 AR600/44 AR600/45 AR600/45-78 Lock furniture (AR6/12 plate and AR600SCL Lever) Euro profi le lock furniture 47.6mm centres (AR6/13 plate and AR600SCL Lever) Euro profi le lock furniture 72mm centres (AR6/13-72 plate and AR600SCL Lever) Oval profi le lock furniture 48.5mm centres (AR6/14 plate and AR600SCL Lever) Bathroom furniture 57mm centres (AR6/15 plate and AR600SCL Lever) Bathroom furniture 78mm centres (AR6/15-78 plate) LATCH LEVER KEY EURO OVAL BATHROOM 278
13 HOPPE Escutcheons, Indicator & Turn K15S Escutcheon (8mm) Ø 52mm with 38mm fi xing centres AR600/26 AR600/27 AR600/28 AR600/30 Lever key escutcheon (pair) Euro profi le escutcheon (pair) Oval profi le escutcheon (pair) Blank escutcheon (pair) LEVER KEY EURO OVAL BLANK 8 Bathroom Indicator & Turns (8mm Rose) 5mm Spindle Disabled bathroom turn is colour coated aluminium AR600/29 AR600/29D-H Bathroom turn and indicator Disabled Bathroom turn and indicator AR-6/7/8-SLEEVE Spindle sleeve pack converts 5m spindle to either 6, 7 or 8mm TURN & INDICATOR DISABLED TURN & INDICATOR 8 279
14
15 Pull Handles and Accessories
16 Pull Handles and Accessories HOPPE Pull Handles Steel Cored Straight Pull Handles ( D Handles) Ø 23mm Concealed Screw Fixing HOPPE Ref. K5050 Suitable for 40mm to 50mm door thickness AR602/165CF 165mm centres, pull handle Steel Cored Straight Pull Handles ( D Handles) Ø 34mm Concealed Screw Fixing HOPPE Ref. K ø ø34 Suitable for 40mm to 50mm door thickness standards and certification Conformity Statement: Pull Handles with a length of 400mm and above meet the dimensional recommendations of BS8300 and Approved Document M 9 12 AR602/220CF AR602/300CF AR602/425CF AR602/600CF 220mm centres, pull handle 300mm centres, pull handle 425mm centres, pull handle 600mm centres, pull handle 282
17 Steel Cored Straight Pull Handles ( D Handles) Ø 23mm Bolt Through Fixing HOPPE Ref. K5050 HOPPE Pull Handles Suitable for 40mm to 50mm door thickness Supplied with bolt through fi xing and matching bolt cover caps AR602/165BF 165mm centres, pull handle Steel Cored Straight Pull Handles ( D Handles) Ø 34mm Bolt Through Fixing HOPPE Ref. K5030 ø23 64 ø34 85 Suitable for 40mm to 50mm door thickness Supplied with two bolt through fi xings ( ) and matching bolt cover caps ø ø standards and certification 8 12 Conformity Statement: Pull Handles with a length of 400mm and above meet the dimensional recommendations of BS8300 and Approved Document M AR602/220BF AR602/300BF AR602/425BF AR602/600BF 220mm centres, pull handle 300mm centres, pull handle 425mm centres, pull handle 600mm centres, pull handle Steel Cored Straight Pull Handles ( D Handles) Ø 34mm Back-to-Back Fixing HOPPE Ref. K5030 Suitable for 40mm to 50mm door thickness Supplied with back-to-back fi xing (592302) Supplied with inner pull handle drilled, with grub screws to lock back-toback fi xing standards and certification Conformity Statement: Pull Handles with a length of 400mm and above meet the dimensional recommendations of BS8300 and Approved Document M 85 AR602/220BB AR602/300BB AR602/425BB 220mm centres, pull handle 300mm centres, pull handle 425mm centres, pull handle ø AR602/600BB 600mm centres, pull handle 283
18 Pull Handles and Accessories HOPPE Pull Handles Steel Cored Cranked Pull Handles Ø 34mm Concealed Screw Fixing HOPPE Ref. K5130 Suitable for 40mm to 50mm door thickness AR603/200CF AR603/300CF 200mm centres, pull handle 300mm centres, pull handle ø Steel Cored Cranked Pull Handles Ø 34mm Bolt Through Fixing HOPPE Ref. K5130 Suitable for 40mm to 50mm door thickness Supplied with two bolt through fi xings ( ) and matching bolt cover caps AR603/200BF AR603/300BF 200mm centres, pull handle 300mm centres, pull handle ø34 284
19 Steel Cored Cranked Pull Handles Ø 34mm Back-to-Back Fixing HOPPE Ref. K5130 HOPPE Pull Handles Suitable for 40mm to 50mm door thickness Supplied with back-to-back fi xing (592302) Supplied with inner pull handle drilled, with grub screws to lock back-toback fi xing AR603/200BB AR603/300BB 200mm centres, pull handle 300mm centres, pull handle 85 ø
20 Pull Handles and Accessories HOPPE Pull Handles Steel Cored V Shaped Pull Handles Ø 34mm Bolt Through Fixing HOPPE Ref. K5230 Suitable for 40mm to 50mm door thickness Supplied with two bolt through fi xings ( ) and matching bolt cover caps AR604/300BF 300mm centres, pull handle ø34 Steel Cored V Shaped Pull Handles Ø 34mm Back-to-Back Fixing HOPPE Ref. K5230 Suitable for 40mm to 50mm door thickness Supplied with back-to-back fi xing (592302) Supplied with one inner pull handle drilled, with grub screws to lock back-toback fi xing AR604/300BB 300mm centres, pull handle 85 ø
21 Steel Cored Semi-Circular Pull Handles Ø 34mm Bolt Through Fixing HOPPE Ref. K5330 HOPPE Pull Handles Suitable for 40mm to 50mm door thickness Supplied with bolt through fi xing set (618668) and matching bolt cover caps Supplied with pull handle drilled, with grub screws AR605/300BF 300mm centres, pull handle ø34 Steel Cored Semi-Circular Pull Handles Ø 34mm Back-to- Back Fixing HOPPE Ref. K5330 Suitable for 40mm to 50mm door thickness Supplied with two back-to-back fi xings (600168) Supplied with both pull handles drilled, with grub screws to lock back-to-back fi xing AR605/300BB 300mm centres, pull handle 85 ø
22 Pull Handles and Accessories HOPPE Accessories AR607IM AR607IF AR607ID 80mm x 150mm concealed fi xing, international male sign 80mm x 150mm concealed fi xing, international female sign 80mm x 150mm concealed fi xing, international disabled sign AR612 AR613 Ø 32mm fl oor/wall mounted door stop 20mm projection Ø 52mm fl oor/wall mounted door stop 40mm projection AR615 Ø 52mm bell push AR617A AR617B AR618 AR619 Face fi xing hat and coat hook (20mm wide) Concealed fi xing hat and coat hook (20mm wide) Face fi xing coat hook (20mm wide) Concealed fi xing coat hook (20mm wide) AR620 AR620PP Ø 20mm toilet roll holder Ø 20mm locking toilet roll holder AR620PP-KEY Key for AR620PP AR mm x 220mm towel ring AR621 Ø 40mm cupboard knob 40mm projection AR622A AR622B AR622C 10mm x 64mm screw fi xing from back, cabinet handle 32mm projection 12mm x 96mm screw fi xing from back, cabinet handle 38mm projection 20mm x 128mm screw fi xing from back, cabinet handle 55mm projection 288
23 ARRONE Nylon Accessories AR607M AR607F AR607D 100mm x 150mm rectangular male sign 100mm x 150mm rectangular female sign 100mm x 150mm rectangular disabled sign AR624A AR624B 75mm x 305mm square end, self adhesive fi nger plate 75mm x 305mm radiused end, self adhesive fi nger plate AR625 Self adhesive kicking plate Cut to order 289
24 Pull Handles and Accessories ARRONE Colour Coated Accessories AR606S AR606YP AR606U Cylinder pull for standard rim cylinder Cylinder pull for euro profi le cylinder Cylinder pull for oval profi le cylinder AR610A AR610B 150mm surface door bolt 200mm surface door bolt AR610C 19mm x 200mm lever action fl ush bolt AR614 Wall mounted door stop 75mm projection AR628A AR628B AR628C AR628D 75mm x 50mm x 1.75mm Colour coated steel butt hinge with matching screws (1838 type) (See Hinges section) 100mm x 75mm x 2.25mm Colour coated steel butt hinge with matching screws (1838 type) (See Hinges section) 75mm x 63mm x 2.75mm Colour coated steel butt hinge with matching screws (451 type) (See Hinges section) 100mm x 75mm x 2.75mm Colour coated steel butt hinge with matching screws (451 type) (See Hinges section) 290
25 Bathroom Hardware for Inclusive Design AR763 Folding Grab Rail Also available in Stainless Steel: see Stainless Steel section AR763-WH Folding grab rail AR764 Backrest Also available in Stainless Steel: see Stainless Steel section AR764-WH Back rest AR765 Grab/Towel Rail Ø 34mm x 600mm Also available in Stainless Steel: see Stainless Steel section AR765-WH Ø 34mm X 600mm Grab/towel rail DOC-M Packs Also available in Stainless Steel: see Stainless Steel section AR767-WH Doc M Pack including 1no AR763, 1 No AR764 & 3 no AR AR768-WH Doc M Pack including 1no AR763, 1 No AR764 & 4 no AR
26 Pull Handles and Accessories HOPPE Nylon Series Spares and Fixings Spindles mm x 105mm full profi le spindle to suit up to 44mm door thickness mm x 125mm full profi le spindle to suit up to 54mm door thickness mm x 135mm full profi le spindle to suit up to 64mm door thickness mm x 75mm solid spindle for bathroom furniture upto 50mm thick door Screws AR-GRUB-FULL-SAA Spare grub screw to suit full profi le spindle AR200FP Furniture fi xing pack comprising 2 male/female bolt fi xings and 4 wood screws Pull Handle Fixings AR602BF Single M12 x 90mm bolt for bolt fi xing Ø 34mm pull handles AR602, 603 & ARBF-25/30 Pair bolts for bolt fi xing Ø 34mm pull handles AR AR602BB Pair back to back fi xings for Ø 34mm pull handles AR602, 603 & 604, door thickness 40-50mm ARBB-3 Pair back to back fi xings for Ø 34mm pull handles AR602, 603 & 604, door thickness 50-60mm ARBB-25/30-44 Single back to back fi xing for Ø 34mm pull handles AR Back to back fi xings for glass doors (8-13mm) Ø 34mm pull handles AR602, 603 & ARBB-25/30-8/13 Back to back fi xings for glass doors (8-13mm) Ø 34mm pull handles AR
HOPPE Paris Series 138S/42K (Grade 3 BS EN1906: 2002) Lever on Round Rose Ø 19mm
Paris Series Paris Series HOPPE Paris Series 138S/42K (Grade 3 BS EN1906: 2002) Lever on Round Rose Ø 19mm features 52 9 66 38 54 143 Supplied with both bolt through and wood screw fi xings AR200FP (701742)
Commercial & Residential Hardware Pocket Guide
2010 EDITION Commercial & Residential Hardware Pocket Guide HOPPE (UK) Ltd Welcome to HOPPE (UK) Ltd Founded in 1988 HOPPE (UK) Ltd is now recognised as market leader in the field of door and window hardware
BOLOTA 316 OTHER PRODUCT RANGES SERVICE
BOLOTA 316 BOLOTA 316 OTHER PRODUCT RANGES SERVICE INDEX Lever Handles Escutcheons & Bathroom Turns Academy Range Pull Handles Push Plates & Kick Plates Signage Lockcases Cylinders Door Controls Hinges
HOPPE (UK) Ltd. Introducing ARRONE Plus Anti-Ligature Range. About HOPPE (UK) Ltd ARRONE
Anti-Ligature Range HOPPE (UK) Ltd Introducing ARRONE Plus Anti-Ligature Range It is a generally accepted statistic, supported by government figures, that several thousand people are seriously or fatally
The Fire Resistance Performance Of Timber Or Mineral Composite Based Insulated Doorsets When Fitted With HOPPE and ARRONE Pull Handles
Exova Warringtonfire Holmesfield Road Warrington WA1 2DS United Kingdom T : +44 (0) 1925 655 116 F : +44 (0) 1925 655 419 E : warrington@exova.com W: www.exova.com Title: The Fire Resistance Performance
L2C25 Deadlocking mortice nightlatch. L2C26 Mortice escape sashlock. 2C27 Mortice bathroom lock 3 M F 2 B B M F 2 B C 2 0
L2C25 Deadlocking mortice nightlatch Cylinder key operation from the outside of the door and handle operation from inside Latchbolt is automatically locked by the anti-thrust bolt - stainless steel latch
ARCHITECTURAL HARDWARE
ARCHITECTURAL HARDWARE Door furniture Keeping people safe and secure where they live, work and visit. - Introduction Quality starts with performance and durability The first point of contact for anyone
ARCHITECTURAL HARDWARE
ARCHITECTURAL HARDWARE Door furniture Keeping people safe and secure where they live, work and visit. - Introduction Quality starts with performance and durability The first point of contact for anyone
Fusion/Door Furniture/by John Planck
Fusion/Door Furniture/by John Planck J O H N P L A N C K L t d a r c h i t e c t u r a l h a r d w a r e Fusion Door Furniture The Door Furniture section comprises of items that generally fit on the face
Door furniture & accessories. Product overview
Door furniture & accessories Product overview Briton door furniture & accessories The first point of contact for anyone entering and moving around a building is the door hardware, whether that is a pull
door & window furniture
1 door handles 160 door furniture 169 door security 179 door stops 186 window furniture 188 159 order online at www.hinges.co.uk door handles NO.680/V NO.681/V SOLID BRASS VICTORIAN STRAIGHT LEVER LATCH
LEVER HANDLES MORTICE KNOBS PULL HANDLES GATE FURNITURE FRONT DOOR TEE HINGES AND HINGE FRONTS WINDOW FITTINGS CABINET HARDWARE ACCESSORIES CREATION
O L D H I L L I R O N W O R K S B L A C K A N T I Q U E C A S T I R O N 1 2 O L D H I L L I R O N W O R K S O L D H I L L I R O N W O R K S C O N T E N T S P A G E P A G E P A G E P A G E P A G E PAGE
Modern/Door Furniture/by John Monaghan JOHN MONAGHAN
Modern/Door Furniture/by John Monaghan JOHN MONAGHAN Modern/Door Furniture The Door Furniture section comprises of items that generally fit on the face of the door allowing the door to be opened and locked.
Organisational Kitchen Fittings Kitchen Cabinet Accessories
Kitchen waste bin systems Single waste bin, capacity 1 litres Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side panel Housing: Steel, plastic
Hinges and Flap Fittings Information
Information METALLAMAT Adjustment options Lateral adjustment Adjusting on concealed hinge + mm Height adjustment Via mounting plates adjusting ± 2 mm Depth adjustment Adjusting on concealed hinge + 4 mm,
Hardware Fitting Accessories Bolts
Lever action flush bolt With slide Width: 19 mm Stroke (a): 25 mm 1 Flush bolt 1 Set of fastening material With lever arm Width: 19 mm Stroke (a): 18 mm 1 Flush bolt 1 Set of fastening material Stainless
modric THE BRITISH DESIGN CLASSIC Modric was the original. The first ironmongery range with a uniform aesthetic across a co-ordinated range. Providing a consistent faultless finish, modric changed the
KEY FEATURES HARDWARE ICON BI-FOLD OPERATOR
ICON BI-FOLD OPERATOR This swivel bi-fold operator throws locking bolts into the frame at top and bottom of the panel. Optional key-locking (separately installed) is available. Having an operator handle
Furniture Fittings Concealed Hinges
Blum Clip Top Blumotion, opening angle 110 Material: Steel cup and arm : Screw fixing Installation: Door onto carcase without tools (Clip system) Adjustment: 3 dimensional (with appropriate mounting plate)
BJ WALLER ARCHITECTURAL IRONMONGERS. B J Waller Limited DOOR HARDWARE
B J Waller Limited DOOR HARDWARE Levers on Roses Peterhouse Designer Levers on Roses 45.10103 Peterhouse Designer Lever on 50x8mm Rose CP 45.10113 Peterhouse Designer Lever on 50x8mm Rose SC Trinity Designer
Fast Fix Hardware STOCKLIST Items Marked (*) are non stocked items
Fast Fix Hardware STOCKLIST Items Marked (*) are non stocked items Tubular lever handles T H 1 0 1 T H 1 0 4 T H 1 0 2 TH105 TH111 TH114 Satin stainless steel sprung levers on 8mm rose. Th101 Return to
RestoRation.
RestoRation Door Furniture and Accessories Other Door Accessories and Fittings Hinges Cabinet Hardware Window Hardware Hooks Stair Fittings and Accessories Alphabet and Numerals www.delfarchitectural.com.au
Standard push bar panic and emergency exit devices.
Briton Series - Panic and emergency exit hardware Briton Series - Panic exit hardware Standard push bar panic and emergency exit devices. In distinct contrast to the modular nature of the Briton 560-0
STEELWORX SSL LEVERS ON SQUARE ROSE
STEELWORX SSL LEVERS ON SQUARE ROSE Introduction Eurospec is a brand of Carlisle Brass used for commercially orientated hardware. Eurospec levers are designed to provide beautifully engineered stainless
Company profile WITH EVERY STEP WE MAKE, WE WANT TO KEEP CONTRIBUTING TO OUR GOOD REPUTATION OF A STRONG CZECH MANUFACTURER OF LOCKS AND FITTINGS
Furniture fittings Company profile TOKOZ a.s. is a company working in the field of security mechanisms for more than 90 years. Thanks to years of experience we have become real experts on manufacturing
Introduction to Allgood Washroom
Introduction to Allgood Washroom 16. grabrails contents 1. introduction P.06 5. Spare toilet roll holders 2. Added value P.08 P.14 8. Towel rails P.20 11. Buffered coat hooks 12. Cabinet knobs handles
Material Packing Brown Grey Pine Black White
RTA Connectors Minifix Zinc alloy For housing: 12 or 18 Bolt hole: Ø 7 or 8, depending on choice of connecting bolt Drilling distance B: Distance from centre of Minifix housing to shelf front edge (24
Door Bolt - Satin Chrome. High quality solid brass, chrome plated surface fix bolt.
Bolts Door Bolt - Polished Brass Door Bolt - Polished Chrome Door Bolt - Satin Chrome Door Bolt - Florentine Bronze High quality solid brass surface fix bolt. High quality solid brass, chrome plated surface
Door Knob Sets. Door Furniture DF2:010. Fixings
oor Knob Sets Four classic non-sprung oor Knob designs available in a variety of sizes, functions, and configurations. 1022 3048 uncontrolled, hinged, solid residential doors and are supplied with finish
Bathroom Fittings. Hardware Bathroom Washroom Handrail Wardrobe Signs KNUD HOLSCHER H DESIGN
KNUD HOLSCHER H DESIGN www.dline.com Bathroom Fittings Hardware Bathroom Washroom Handrail Wardrobe Signs d line no: 1038-1215 Carl F as, Denmark E-mail: dline@dline.com Internet: www.dline.com Photography:
Hardware Bathroom Washroom Handrail Signs. Bathroom Fittings
Bathroom Fittings Hardware Bathroom Washroom Handrail Signs 2 Marine Quality Stainless Steel The high humidity levels in the bathroom setting necessitates the use of a non-corrosive rustresistant. On
Section 7 Wooden Door Locks
Section 7 Wooden Door Locks SASH LOCKS COMMERCIAL VERSION- CxC 57mm Specification Technical Features Bolt Tested: Robust construction for high level durability... - 500 kg side push resistant...and security
Auxiliary Hardware Brass Padlocks
Brass Padlocks Gainsborough offer a selection of quality 45mm and 50mm brass padlocks, featuring brass and steel materials and 6 pin cylinder security. The range includes hardened steel or brass shackles
Artefact Series II Door Furniture. Keeler Hardware. telephone
Artefact Series II Door Furniture AA ABLOY, the global leader in door opening solutions Contents Lockwood Door Furniture Handing Convention 2 Square Corner Plates 3 10mm Radius Corner Plates 5 Round End
BRITISH STANDARD MORTICE LOCKS
BRITISH STANDARD MORTICE LOCKS FOREND EASILY REVERSIBLE LATCH (NO NEED TO REMOVE TOP PLATE) SPRING SLOTS TO ACCOMMODATE BOLT THROUGH FURNITURE ERA British Standard Mortice Locks are manufactured to conform
Kitchen Fittings Hanging Cabinets and Accessories
Cabinet hanger Knock-in version, load bearing capacity 130 kg/pair Depth adjustment Finish: Galvanized Concealed mounting of cabinet hanger behind the rear panel (Min. 16 mm free space required) Mounting
Section 7 Wooden Door Locks
Section 7 Wooden Door Locks file:///l /CATALOGUES/General J an 2009/c us tom er/purdue/catalog/pic ture Library /Wooden Door/Leggelatc h.jpg SASH LOCKS COMMERCIAL VERSION- CxC 57mm Specification Technical
PANIC & EXIT HARDWARE
CI/SfB (32) Xt7 PANIC & EXIT HARDWARE Uncompromising safety 2 CEN Standards European CEN Standards 1997. There are two standards. - Where panic situations can be foreseen and occupants of the building
THEMES exclusive bronze designs
THEMES exclusive bronze designs 4, The Courtyard Wootton Park Business Centre Alcester Road Wootton Wawen Warwickshire B95 6HJ T: 00 +44 (0)845 003 7522 F: 00 +44 (0)845 003 7523 E: sales@louisfraser.co.uk
Anti-Ligature. Door Furniture Range Construction Trade
ARCHITECTURAL IRONMONGERY LTD Anti-Ligature Door Furniture Range 2011 Architectural Practice Construction Trade National Health Service & Health Authorities 176 Long Lane, Halesowen, West Midlands, B62
Testing and CE Marking
Briton Series - Panic and emergency exit hardware Briton Series - Panic exit hardware Testing and CE Marking In distinct contrast to the modular nature of the Briton 560-0 Series, the long established
Jonathan Elwell Bespoke Joinery Ltd. Unit H Greenfield Business Park 1 Greenfield, Holywell. CH8 7HJ HB27
Our contemporary doors are made from solid wood. They are supplied pre-hung into the frame with a Secured by Design locking system, handles and a full factory stain or paint finish HB27 HB01 Contemporary
STAINLESS STEEL FURNITURE
STAINLESS STEEL FURNITURE Introduction Introduction UNION offers a range of high quality lever and pull handles suitable for use in public, commercial, institutional and residential buildings, where there
Stainless Steel and Brass Flush Handles Meets DS/ISO standard 2768m Page 5-1
Izerwaren Order number 51.004 Stainless Steel and Brass Flush Handles Meets DS/ISO standard 2768m Page 5-1 Flush Door Lever Handle, for use with entry set with Profile Cylinder 304 Stainless Steel 100
Door Hinges Drill-in Hinges
Drill-in hinge StarTec Frame part For timber lining frames For rebated doors Maintenance-free friction bearing To use in combination with receiver Max. door weight: 40 kg Knuckle: Ø15 mm Drilling bit Ø7.2
DORMA Coastal Series. 316 Solid Stainless Steel Door Furniture
DORMA Coastal Series 316 Solid Stainless Steel Door Furniture DORMA COASTAL SERIES Solid Stainless Steel Rose and Plate Door Furniture DORMA in Australia and New Zealand is developing into a leading manufacturer
Designers & Manufacturers of Architectural Hardware. Traditionally Cast. RusticBronze. Made in England
F R A N K A A R T esigners & Manufacturers of Architectural Hardware RusticBronze Traditionally Cast Made in England Evoking the Traditions of Yesteryear... Welcome to Frank Allart s traditionally cast
COASTAL SERIES. 316 Solid Stainless Steel Door Furniture
316 Solid Stainless Steel Door Furniture DORMA COASTAL SERIES SOLID STAINLESS STEEL ROSE AND PLATE DOOR FURNITURE DORMA in Australia and New Zealand is developing into a leading manufacturer of solid stainless
Leebotwood Shrewsbury Ludlow Newport The Collection. Newport
Leebotwood 01694 751444 Shrewsbury 01584 875538 Newport 01952 810038 Official Stockists of: Hand Forged Traditional Ironmongery The Collection Door & Window Furniture 44 Shrewsbury Newport 01952 810038
Drake & Wrigley s extensive range of architectural hardware is produced entirely in commercial grade nonferrous metals, primarily solid brass, zinc and stainless steel. A wide choice of colours can also
One programme many advantages. Type C-BASIC the extremely sturdy WC cubicle made of HPL
BASIC WC cubicles BASIC contents One programme many advantages............................ page 3 Type C-BASIC the extremely sturdy WC cubicle made of HPL................ page 4 / 5 Type D-BASIC the inexpensive
77 cm. 5243/3-GA (3 pcs.) 5243/3-BO (3 pcs.)
ARCHIMEDE ST.102-4ENG SPECIFICATION Range: ARCHIMEDE Design: Caimi Lab 5203-GA, 5203-BO, 5213-GA, 5213-BO, 5223-GA, 5223-BO, 5233/3-GA, 5233/3-BO, 5241/3-GA, 5241/3-BO, 5243/3-GA, 5243/3-BO, 5245/3-GA,
HCS the HOPPE Compact System. for all HOPPE door- and window handles!
HCS the HOPPE Compact System for all HOPPE door- and window handles! HCS the HOPPE Compact System...... is a unique product developed by HOPPE. ... opening, closing and locking all in one HCS the HOPPE
Door Ironmongery included within your quotation
Door Ironmongery included within your quotation Configuration Specifications All Ironmongery has been initially quoted with a Satin or Polished Brass finish (unless specified), for further options on Ironmongery
+91-8042903743 Alumex International http://www.alumexmetal.com/ Alumex International is engaged in manufacturing and exporting of various Metallic Household Goods and Hardware Products as Door Handle,
Aurora Door Concepts Practicality in Design
Aurora Door Concepts Practicality in Design Aurora Door Concepts This collection of commercial doors and related accessories has been designed to enhance our partition suites. The range has evolved due
Push and Pull Door Furniture. Plate Door Furniture Door Furniture and General Hardware
Plate Door Furniture Push and Pull Door Furniture Door Furniture and General Hardware 3.109 184 Offset Pull Made from brass and designed to compliment 1800 and 2800 Series Brass Plate Furniture, the 184
Adjustment Has adjustment strike block screw for sealing action adjustment.
RP8 Si A concealed, acoustic automatic door bottom silicon seal for medium temperature smoke and fire door applications. RP8Si is spring loaded to lift clear off the floor as soon as the door leaf is opened
Catalogue. Locks for aluminium. The global leader in door opening solutions
Catalogue Locks for aluminium The global leader in door opening solutions Summary Locks for aluminium 1 POINT LOCKS............................................................ 2 3 POINTS LOCKS...........................................................
An ASSA ABLOY Group company
An ASSA ABLOY Group company AS A SPECIALIST MANUFACTURER OF WINDOW ACCESSORIES FOR TOPHUNG OUTWARD PROJECTING WINDOWS, RIVALU OFFERS YOU A COMPLETE RANGE OF SOLUTIONS FOR THE CLOSING OF YOUR WINDOW IMPERVIOUSNESS
Hardware Fitting Accessories Accessories
Door viewer Suitable for door thicknesses (a) 34 52 mm Telescopic version Without flap Angle of vision: 160º Door drilling: 12 mm Suitable for door thicknesses (a) 35 78 mm Telescopic version Without flap
Connector Technology, Shelf Supports Connection Fittings
MODULAR Connection fitting for recess mounting Finish: Burnished : For recess mounting The plate should allways be installed so that the supporting plate butts against the end of the recess. For rapid
Lift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge
Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge Pivot door
ARCHITECTURAL & BUILDERS HARDWARE THE MILLENNIUM COLLECTION. Click here for index A - K. Click here for index K - Z. Click here for introduction
CI/SfB (31.59) X t 7 Click here for index A - K Click here for index K - Z Click here for introduction THE MILLENNIUM COLLECTION Click here for contacts ARCHITECTURAL & BUILDERS HARDWARE A MONAGHAN GROUP
Silver Kite Architectural Ironmongery - Classic Range Mortice Knobs - 1 of 6
Mortice Knobs - 1 of 6 34020 34021 34022 34023 34020 Mortice knob knob diameter 66 rose diameter 66 34021 Mortice knob knob diameter 57 rose diameter 58 34022 Mortice knob knob diameter 49 rose diameter
Ovation Series Door Furniture. ASSA ABLOY, the global leader in door opening solutions
Ovation Series Door Furniture AA ABLOY, the global leader in door opening solutions Contents Ovation General Information 1 Ovation Lever Furniture 3 Ovation Escutcheons and Turns 4 Privacy Adaptor 5 Thicker
Locks and Catches Catches and Furniture Bolts
Magnetic catch with low noise closure Material: Plastic housing Version: with closed surface and internal magnet, magnets no viewable : Press fixing Pull 0. kg, for drilling hole Ø8 mm white 26.01.701
Door Knob Sets. Door Furniture DF2:010. Fixings. How to Order. Finishes - See our price list or website for finish availability.
oor Knob Sets Four classic non-sprung oor Knob designs available in a variety of sizes, functions, and configurations. 1022 3048 uncontrolled, hinged, solid residential doors and are supplied with finish
DICTATOR RTS Tube Door Closer
Tube Door Closer RTS v long DICTATOR RTS Tube Door Closer The "Invisible" Door Closer The DICTATOR RTS tube door closer is built into the door and therefore is as good as invisible. The joint can only
Tubular Latches. 3 a. Heavy Duty Lever Latches Series HLL Features Ordering String Functions Dummy Mounts Trim Sets Specifications
3 Tubular Latches 3 a 3 4 6 8 12 14 Heavy Duty Lever Latches Series HLL Features Ordering String Functions Dummy Mounts Specifications 2016 02 2 FSB North America Heavy Duty Lever Latch HLL Series Quality
Architectural Solutions
Architectural Solutions Kaba - since 1862 Kaba since 1862 The Kaba Group runs operations in more than 60 countries and employs a workforce of around 10,000. As the technological forerunner Kaba develops
Clamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
ADJUSTABLE 3D CONCEALED HINGES FOR DOORS
ADJUSTABLE 3D CONCEALED HINGES FOR DOORS Introduction Eurospec is a brand of Carlisle Brass used for commercially orientated hardware. Products are designed to provide beautifully engineered door hardware
FURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS
www.hafeleindia.com FURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS ABOUT ITALIANA FERRAMENTA ITALIANA FERRAMENTA is specialized in the production of high quality accessories
Pull Handles Fixing Types. One-sided installation. Installation per pair. Wood, plastic profiles, 2-3 chamber aluminium profiles
Pull Handles Fixing Types One-sided installation Wood, plastic profiles, 2-3 chamber aluminium profiles Installation per pair Wood, plastic profiles, 2-3 chamber aluminium profiles 204 HEWI Hardware Technology
The Collection Issue Nine
nv From the lr The Collection Issue Nine Issue Nine Introduction Welcome to the 2015 showcase of From the Anvil s finest range yet. Our latest catalog e int oduces over 200 new products, desig ed and developed
Parts List (Continued) 18 each: #8 x 0.625" Truss Head Phillips Screw 20 each: #8 x 1.75" Flat Head Phillips Screw 4 each: #8 x 1.25" Flat Head Philli
EVO Tall Pull-Out Wood Pantry Important Notes Always read the instructions completely and carefully before beginning assembly. Remove and check contents for damage and/or missing parts. Keep the original
DOOR SAVERS AVAILABLE IN STEEL, STAINLESS STEEL (32D), BRIGHT BRASS (3), BRONZE (10) AND OIL RUBBED BRONZE (10B)
SAVERS K1 : 9 High For cylindrical locksets 2-1/8 bore, 2-3/8 and 2-3/4 backsets K 188 2-3/8 1-3/8 K 184 2-3/8 1-3/4 K 148 2-3/4 1-3/8 K 144 2-3/4 1-3/4 K5 144 5 SPECIFY K3 : 9 High For cylindrical locksets
Contract range of locks and latches
Contract range of locks and latches E N 1 2 2 0 9-2 0 0 3 Tested The Gridlock Security Products contract range of locks and latches has all been successfully tested at Warrington Certification Ltd to meet
UNION Optimus 3 Specification Mortice Lock Range. ASSA ABLOY, the global leader in door opening solutions
UNION Optimus 3 Specification Mortice Lock Range ASSA ABLOY, the global leader in door opening solutions Introducing the new Optimus 3 specification mortice lock range from UNION UNION s new specification
Locks. Locks OUTLETS NATIONWIDE
OUTLETS NATIONWIDE 500 Now it s easy to find just the right padlock for any security application. Choose from a wide selection of padlocks suitable for medium to high quality insurance quality and suitable
P USHbutton 500 series
Dimensions 35 60mm 178mm Model 500/505 For use with existing lock 1 6 2 7 3 8 4 9 5 0 1 6 2 7 3 8 4 9 5 0 Features ode Free Entry Mode by turning the slotted button 90 degrees after entering the code (models
930 Series Mortice Exit Device
930 Series Mortice Exit Device BS EN 1125:1997+A1:2001 Classification Code 37601322B The Adams Rite 930 Series Mortice Exit Device is a life safety device which is designed to fit timber or hollow steel
LINK OPENING SYSTEMS FOR FLAP AND DROP DOWN DOORS. click 2 INSTALLATION UNHANDED MECHANISM COVER CAP INSERTION
INSTALLATION Recommended fi xing countersunk head wood screws Ø 4 x 18 mm for door 18 mm min. thick. Pre-inserted screw Ø 3,5 x 16 mm - PZ2. The door bracket has to be placed with the narrow part of the
Architectural Door Furniture
Architectural Door Furniture ALCOM Architectural Door Furniture Acclaimed for the production and supply of premium affordable security solutions, Australian Lock Company is proud to expand its product
JEB HARDWARE JEB Hardware Catalogue Version#1_2018
JEB HARDWARE JEB Hardware Catalogue Version#1_2018 Content 3 Lever Handle 5-6 Pull Handle 8-11 Lockcase 13 Cylinder 15 Hinge 17-23 Others Remark: Standard delivery lead time: 2 weeks ** Order upon request.
HORIZON EXCLUSIVE SOLID BRASS DOOR FURNITURE
HORIZON EXCLUSIVE SOLID BRASS DOOR FURNITURE Oria Lever on Rose Contents HORIZON Exclusive Door Furniture created from premium solid forged brass components. Levers on Rose Escutcheons 5 12 Fitting Instructions
Door Furniture - Visca
31 Door Furniture - Visca Manufactured in the heart of Italy, Visca is a remarkable collection by some of Europe s most esteemed designers. All Visca products are made of Solid Brass or Stainless Steel
Executive furniture KARA
Executive furniture KARA Features Kara combines contemporary fi nishes and effi cient offi ce solutions! Sturdy melamine desktops and expansive work surfaces, combined with practical storage solutions
DIY GLASS BALUSTRADE AND POOL FENCING THE CHOICE IS SIMPLE
DIY GLASS BALUSTRADE AND POOL FENCING THE CHOICE IS SIMPLE SAFE STYLISH AND AFFORDABLE FOR DIY GLASS FENCE SOLUTIONS THE CHOICE IS SIMPLE Bring your outdoor areas to life with clear views and clean lines.
Gota cassette. Version 1.10 Sun Protection AVZ 3G.1
Version 1.10 Sun Protection AVZ G.1 G.2 Sun Protection AVZ Version 1.10 Part number Description Paint finish Length in m 1 4211 772-090 Alu wall bracket 140 mm Mill finish 4211 772-008 Idem RAL 705 light
Strand Antipanic Emergency Exit and Panic Hardware
SHA01 Strand Antipanic Emergency Exit and Panic Hardware StrandHardware Ltd Strand Antipanic Emergency Exit and Panic Hardware Strand Hardware Ltd supplies high quality Window and Door Hardware for commercial
SIMPLICITY SERIES. Affordable hardware for multi-residential developments made easy.
SIMPLICITY SERIES Affordable hardware for multi-residential developments made easy. i An ASSA ABLOY Group brand Contents Simplicity Series Kit Simplicity Series Leversets Simplicity Series Door Escutcheons
M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information
![M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information](/thumbs/77/74547895.jpg "M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information")
Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4
Installation Manual for Metal Toilet Partitions Elite & Elite Plus Series
P a g e 1 Table of Contents Page General Notes and Tools Required 3 STEP 1: Establish Floor Bracket Locations 4 STEP 2: Fasten Floor Brackets 4 & 5 STEP 3: Erect Panels 6 STEP 4: Erect Wall Pilaster 7
NEWS Part. N /0 MINITEC NEWS
NEWS 2009 Part. N 95.0423/0 MINITEC NEWS 2009 1 TABLE OF CONTENT INTRODUCTION CONTENTS 3 END CAP Z WITH HAMMER TAPS 3 END CAP 45X45 VA 4 ANGLE 25 GD-Z 4 ANGLE 45X90 GD-Z 5 ANGLE 90 GD-Z 5 HINGE 19 S 6
Introduction to Ashley Norton 2009
Introduction to Ashley Norton 2009 Introduction to Ashley Norton Overview Manufacturer of architectural door hardware with two key product lines Solid Brass Collection Solid Bronze Collection Operating
D-FINE. CONTENTS Introduction to D-Fine 2-3 D-Fine range with push bar 4-5 D-Fine range with touch bar 6-7 D-Fine outside access device 8
D-FINE GRADE 316 out the best way D-FINE Strand Hardware Ltd supplies high quality Window and Door Hardware for commercial buildings sourced from top European manufacturers and from its own locally manufactured
DOOR TECHNOLOGY ORDER CATALOG SECTION SECURY Automatic Door Lock & Gripset Handle
DOOR TECHNOLOGY ORDER CATALOG SECTION 03.3 SECURY Automatic Door Lock & Gripset Handle Table of Contents 03.3 SECURY Automatic Door Lock & Gripset Handle SECURY Automatic Door Lock...03.3.5 Automatic
Locks. Closing force up to 100kg up to 200kg above 200kg 15N Grade 7 Grade 8 Grade 9 25N Grade 4 Grade 5 Grade 6 50N Grade 1 Grade 2 Grade 3 2-1
Lock Testing and Specification BS EN 12209:2003 has introduced a classification system allowing lock manufacturers to test locks with a wide range of purposes and qualities to a set of common standards.