ASPEN 530 T SINGLE HUNG. Each lite of glass was channel glazed with a reducing vinyl gasket.

Size: px
Start display at page:

Download "ASPEN 530 T SINGLE HUNG. Each lite of glass was channel glazed with a reducing vinyl gasket."

Transcription

1 TESTED FOR Date : July 29, 2004 FLEETWOOD ALUMINUM PRODUCTS Page : 1 of Railroad Street Corona, CA PURPOSE The purpose of this report is to present the testing methods employed and the test obtained during the performance testing of one (1) Thermally Broken Aluminum Single Hung Window described in paragraph 4.0 of this report. 2.0 TEST REFERENCES 2.1 Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors. AAMA/NWWDA 101/I.S.2-97: H HC55 60 x 96 (With Sub-sill) 2.2 CAWM Forced Entry Resistance Tests for Windows. 3.0 SUMMARY The test results in paragraphs 5.0 and 6.0 indicate that the test sample described in paragraph 4.0 of this report complied with the performance requirements of the above referenced specifications. 4.0 SAMPLE SUBMITTED SERIES: ASPEN 530 T SINGLE HUNG CONFIGURATION: O/X FRAME SIZE: 60.00" x 95.93" SASH SIZE: 57.37" x 47.62" FIXED SIZE: 57.37" x 47.62" GLASS: GLAZING: WEEPAGE: The fixed and operable panel were each glazed with a single lite of 1/4" clear annealed glass. Each lite of glass was channel glazed with a reducing vinyl gasket. The sub-sill exterior face contained a 1" x 1/4" weep slot punched at each end. The standard sill contained four (4) 1" x 1/4" weep slots equally spaced throughout the sill span allowing water to dump into sub-sill. WEATHERING: The frame head, on the interior retaining leg, contained a full length strip of 0.230" overall polypile with a 0.260" center fin facing out.

2 Page : 2 of 5 WEATHERING (cont d): Each jamb center retaining leg contained a full length strip of 0.230" overall polypile with a 0.260" center fin facing in and one strip full length facing out. The frame sill contained a full length strip of bulb vinyl weatherstrip which slipped into a rigid PVC insert in the center of the sill. The fixed panel contained the following: 1) The top rail contained a full length strip of 0.230" overall polypile with a 0.260" center fin facing in. 2) The stiles each contained a full length strip of 0.230" overall polypile with a 0.260" center fin facing out. 3) The interlock contained a full length strip of 0.290" overall polypile with a center fin facing in. Each end notch of the interlock also contained a 1⅝" strip of 0.500" overall polypile weatherstrip with a center fin and a 1⅜" self adhesive strip of 0.320" overall polypile facing in The operable panel contained the following: 1) The bottom rail contained a full length strip of 0.230" overall polypile with a 0.260" center fin facing in. 2) The stiles each contained a full length strip of 0.230" overall polypile with a 0.260" center fin facing in. 3) The interlock contained a full length strip of 0.500" overall polypile weatherstrip with a center fin and a 1⅜" self adhesive strip of 0.320" overall polypile facing out. HARDWARE: The operable panel was supported in the frame with a block and tackle balance. The operable panel interlock contained a metal cam lock 19 inches in from each end fastened with a pair of #10 x 1/2" Ph Flat head When closed and locked, each cam lock engaged its respective metal keeper fastened to the fixed interlock with a pair of #10 x 1/2" Ph Flat head A metal pull handle was fastened to the midspan of the operable panel bottom rail with a pair of #8 x 3/4" Ph Flat head CONSTRUCTION: The frame corners were mechanically fastened with a pair of #8 x 3/4" Ph Pan Head The standard sill sat on the sub sill and was sealed full length on the outside and inside running joints. The sill was secured to the sub-sill on the interior edge with four (4) #8 x 1" Ph Pan head screws equally spaced throughout the sill span. Fixed Panel 1) The top rail to stiles was mechanically joined with a pair of #8 x 1½" Ph Pan head 2) The interlock to stiles was mechanically joined with a pair of #8 x 2" Ph Flat head Operable Panel 1) The bottom rail to stiles was mechanically joined with a pair of #8 x 1½" Ph Pan head 2) The interlock to stiles was mechanically joined with a pair of #8 x 2" Ph Flat head

3 Page : 3 of 5 CONSTRUCTION (cont d): The operable panel stiles also contained a T-clip which slipped into the interlock. The clip was secured to the stiles with a #8 x 3/4" Ph Pan head screw. The fixed panel was fastened to the frame head with a #8 x 3/4" Ph Pan Head screw at each end. An aluminum extruded screen adapter was fitted in the fixed channel which also supported the fixed panel above. CAULKING: ANCHORING: The following were sealed: 1) All frame corners were sealed full profile. 2) The interior and exterior metal to metal running joints of sill to sub-sill were sealed. 3) The ends of the sub-sill were caulked shut. 4) All glazing gasket corners were sealed on the interior and exterior prior to assembly. The sub-sill was mounted into 2" x 6" wood rough opening and fastened with #8 x 1½" Ph Flat head screws every 16" on center. The window frame sill was then secured to the sub-sill with four (4) #8 x 3/4" Ph Pan head screws and through the head and jambs with #8 x 1½" Ph Flat Head screws every 16" on center. 5.0 TEST PROCEDURES AND RESULTS 5.1 All testing procedures were performed in accordance with the performance requirements of the test specifications referenced in paragraph 2.0 of this report. 5.2 TEST RESULTS PARAGRAPH TEST DESCRIPTION MEASURED ALLOWED Operating Force (ASTM E 2068) Motion 33.5 lbf. 45 lbf Air Infiltration (ASTM E 283) 1.57 PSF 0.3 CFM/Ft CFM/Ft 2 The tested specimen meets the performance requirements specified in AAMA/NWWDA 101/I.S.2-97 for Air Infiltration Water Penetration (ASTM E 547 & ASTM E 331) 6.00 PSF No Leakage No Leakage Uniform Load Structural (ASTM E 330) 60.0 PSF POS 0.00" 0.23" Set 60.0 PSF NEG 0.00" 0.23" Set Deglazing (ASTM E 987) 70 lbf. Rails 5% Less than 100% 50 lbf. Stiles 2% Less than 100% Page : 4 of 5

4 5.3 OPTIONAL PERFORMANCE GRADES TEST RESULTS PARAGRAPH TEST DESCRIPTION MEASURED ALLOWED 4.3 Water Penetration (ASTM E 547 & ASTM E 331) 8.25 PSF No Leakage No Leakage Uniform Load Deflection (ASTM E 330) Allowable deflection is based on L/ PSF POS 0.30" 0.33" Defl PSF NEG 0.32" 0.33" Defl Uniform Load Structural (ASTM E 330) 82.5 PSF POS 0.03" 0.23" Set 82.5 PSF NEG 0.04" 0.23" Set 5.4 ADDITIONAL TESTING TEST DESCRIPTION MEASURED ALLOWED Water Penetration (ASTM E 547 & ASTM E 331) PSF No Leakage No Leakage Uniform Load Structural (ASTM E 330) 90.0 PSF POS 0.05" 0.23" Set 90.0 PSF NEG 0.05" 0.23" Set CAWM FORCED ENTRY RESISTANCE TEST RESULTS Type "I" Window TEST RESULTS DESCRIPTION Passed Disassembly A Passed With sliding sash in normal position, apply a concentrated load of 200 pounds from the exterior (when possible), to each member incorporating a locking device, at a point on the sash member within 6 inches of the locking device, in direction parallel to the plane of the glass that tends to open the window B Passed Repeat Test A while simultaneously applying a concentrated load of 75 pounds to the sash member containing the locking device, within 6 inches of the locking device in direction perpendicular to the plane of the glass toward the interior. Page : 5 of 5

5 CAWM FORCED ENTRY RESISTANCE TEST RESULTS (cont d) Type "I" Window TEST RESULTS DESCRIPTION C Passed Repeat Test A while simultaneously applying a concentrated load of 75 pounds to the sash member containing the locking device, within 6 inches of the locking device in direction perpendicular to the plane of the glass toward the exterior E Passed Hand and Tool Manipulation D Passed With sliding sash toward the frame jamb to the full limit within the confines of the window frame, repeat Test B, while simultaneously applying a concentrated load of 25 pounds inward at the corner of the operating sash near the interlock stile E Passed Hand and Tool Manipulation For a complete description of the tested sample refer to the attached cross section drawings. Assembly and die drawings of frame members are on file and have been compared to the sample submitted. Test sample sections, drawings and a copy of this report will be retained at the test laboratory for four years. This report may not be modified in any way without the written consent of Fenestration Testing Laboratory. The above test results were obtained by using the applicable ASTM and CAWM Test Methods. This report does not constitute Certification of this product. Certification can only be granted by an approved Administrator and/or Validator. Testing Completed: July 28, 2004 Report Completed: July 29, 2004 Pete Cruz Test Engineer Melchor Ordaz Test Technician

TESTED FOR Report No. : A04H-009 Date : February 10, 2004 FLEETWOOD ALUMINUM PRODUCTS, INC. Page : 1 of Railroad Street Corona, CA 91720

TESTED FOR Report No. : A04H-009 Date : February 10, 2004 FLEETWOOD ALUMINUM PRODUCTS, INC. Page : 1 of Railroad Street Corona, CA 91720 TESTED FOR Date : February 10, 2004 FLEETWOOD ALUMINUM PRODUCTS, INC. Page : 1 of 5 2485 Railroad Street Corona, CA 91720 1.0 PURPOSE The purpose of this report is to present the testing methods employed

More information

GLENWOOD 510 C Horizontal Slider

GLENWOOD 510 C Horizontal Slider TESTED FOR Date : October 28, 1998 FLEETWOOD ALUMINUM PRODUCTS, Inc. Page : 1 of 5 2485 Railroad Street Corona, CA 91720 1.0 PURPOSE The purpose of this report is to present the testing methods employed

More information

ENTRY DOOR TEST REPORT. Rendered to: The Vistawall Group

ENTRY DOOR TEST REPORT. Rendered to: The Vistawall Group ENTRY DOOR TEST REPORT Rendered to: The Vistawall Group Product: Single 500 Wide Stile Outswing Full-Lite Aluminum Entry Door w/ Standard TH-43 Threshold and Woolpile Weathering Title Air Infiltration@

More information

MIAMI-DADE COUNTY PERFORMANCE TEST REPORT. Rendered to: FLEETWOOD WINDOWS AND DOORS Corona, California

MIAMI-DADE COUNTY PERFORMANCE TEST REPORT. Rendered to: FLEETWOOD WINDOWS AND DOORS Corona, California MIAMI-DADE COUNTY PERFORMANCE TEST REPORT This report contains in its entirety: Cover Page: 1 page Report Body: 14 pages Sketch: 1 page Drawings: 5 pages Report No.: E8384.03-301-18 Rendered to: FLEETWOOD

More information

ASTM E 1886 and ASTM E 1996 TEST REPORT. Rendered to: PRL ALUMINUM ARCHITECTURAL PRODUCTS City of Industry, California

ASTM E 1886 and ASTM E 1996 TEST REPORT. Rendered to: PRL ALUMINUM ARCHITECTURAL PRODUCTS City of Industry, California Architectural Testing ASTM E 1886 and ASTM E 1996 TEST REPORT Report No.: D1090.02-301-44 Rendered to: PRL ALUMINUM ARCHITECTURAL PRODUCTS City of Industry, California PRODUCT TYPE: Bi-Fold Door SERIES/MODEL:

More information

ASTM E1886 and ASTM E1996 TEST REPORT. Rendered to: FLEETWOOD WINDOWS AND DOORS Corona, California

ASTM E1886 and ASTM E1996 TEST REPORT. Rendered to: FLEETWOOD WINDOWS AND DOORS Corona, California This report contains in its entirety: Cover Page: 1 page Report Body: 11 pages Sketch: 1 page Drawings: 12 pages ASTM E1886 and ASTM E1996 TEST REPORT Report No.: E8390.02-301-18 Rendered to: FLEETWOOD

More information

Architectural Testing AAMA 501 TEST REPORT. Report Number: C Rendered to: Tubelite, Inc. Walker, Michigan

Architectural Testing AAMA 501 TEST REPORT. Report Number: C Rendered to: Tubelite, Inc. Walker, Michigan Architectural Testing AAMA 501 TEST REPORT Report Number: C1529.01-450-44 Rendered to: Tubelite, Inc. Walker, Michigan MODEL DESIGNATION: E4500 PRODUCT TYPE: Non-Thermal Storefront This report contains

More information

ASTM E1886 and ASTM E1996 TEST REPORT. Rendered to: FLEETWOOD WINDOWS AND DOORS Corona, California

ASTM E1886 and ASTM E1996 TEST REPORT. Rendered to: FLEETWOOD WINDOWS AND DOORS Corona, California This report contains in its entirety: Cover Page: 1 page Report Body: 11 pages Sketch: 1 page Drawings: 5 pages ASTM E1886 and ASTM E1996 TEST REPORT Report No.: E8384.02-301-18 Rendered to: FLEETWOOD

More information

3-LITE PATIO DOOR INSTALLATION INSTRUCTIONS

3-LITE PATIO DOOR INSTALLATION INSTRUCTIONS 3-LITE PATIO DOOR INSTALLATION INSTRUCTIONS IMPORTANT: Read the instructions and familiarize yourself with the door parts and pieces before beginning assembly and installation. TOOLS NEEDED: Tape Measure

More information

INOVO 2-LITE SLIDING PATIO DOOR

INOVO 2-LITE SLIDING PATIO DOOR INOVO 2-LITE SLIDING PATIO DOOR ASSEMBLY AND INSTALLATION INSTRUCTIONS IMPORTANT: READ THE INSTRUCTIONS AND FAMILIARIZE YOURSELF WITH THE DOOR PARTS AND PIECES BEFORE BEGINNING ASSEMBLY AND INSTALLATION.

More information

ASTM E 283, ASTM E 547, AND ASTM E 330 TEST REPORT. Rendered to: SIMPSON DOOR COMPANY

ASTM E 283, ASTM E 547, AND ASTM E 330 TEST REPORT. Rendered to: SIMPSON DOOR COMPANY ASTM E 283, ASTM E 547, AND TEST REPORT Rendered to: SIMPSON DOOR COMPANY SERIES/MODEL: Simpson Door Fir 1501 PRODUCT TYPE: Wood Inswing Door with Side Lites Report No: Test Date: 04/02/04 Report Date:

More information

4-lite Patio Door. Installation Instructions

4-lite Patio Door. Installation Instructions 4-lite Patio Door Installation Instructions IMPORTANT: Read the instructions and familiarize yourself with the door parts and pieces before beginning assembly and installation. Note: Only the 5-0 x 6-8

More information

INOVO 4-LITE SLIDING PATIO DOOR ASSEMBLY AND INSTALLATION INSTRUCTIONS

INOVO 4-LITE SLIDING PATIO DOOR ASSEMBLY AND INSTALLATION INSTRUCTIONS INOVO 4-LITE SLIDING PATIO DOOR ASSEMBLY AND INSTALLATION INSTRUCTIONS IMPORTANT: READ THE INSTRUCTIONS AND FAMILIARIZE YOURSELF WITH THE DOOR PARTS AND PIECES BEFORE BEGINNING ASSEMBLY AND INSTALLATION.

More information

REPORT OF PRODUCT EVALUATION CONDUCTED ON A

REPORT OF PRODUCT EVALUATION CONDUCTED ON A REPORT OF PRODUCT EVALUATION CONDUCTED ON A KRISTRACK ECLIPSE E2 TM 1L3R FOLDING DOOR SYSTEM WITH DOOR PANELS BY B.C. DOOR CO. LTD. 146 x 100 HGD-LC25 FOR KRISTRACK MANUFACTURING, A DIVISION OF A. K. DRAFT

More information

Legend W White B Bronze S Silver (Gray) K Black M Mill. Figure

Legend W White B Bronze S Silver (Gray) K Black M Mill. Figure Figure Description Part No. Additional Part Manual No. Color Code Page No. 1 Frame head N/A Not shown 2 Screen adaptor N/A Not shown 3 Frame jamb N/A Not shown 4 Frame sill N/A Not shown 5 Frame sill adaptor

More information

PERFORMANCE TEST REPORT. Rendered to: GLASSCRAFT DOOR COMPANY

PERFORMANCE TEST REPORT. Rendered to: GLASSCRAFT DOOR COMPANY PERFORMANCE TEST REPORT Rendered to: GLASSCRAFT DOOR COMPANY SERIES/MODEL: Buffalo Forge Steel Doors / Arch Top Double PRODUCT TYPE: In-swing Arch Top Double Door RH-4-5/8 Title Uniform Load Deflection

More information

Series 7600 Installation Instructions Aluminum Multi-Slide Door (Pocketing)

Series 7600 Installation Instructions Aluminum Multi-Slide Door (Pocketing) Series 7600 Installation Instructions Aluminum Multi-Slide Door (Pocketing) Things to Know Before You Start Things to Know Before You Start Removal of Old Fenestration Products Ensure any old fenestration

More information

Vinyl Sliding Glass Door Assembly Instructions

Vinyl Sliding Glass Door Assembly Instructions Vinyl Sliding Glass Door Assembly Instructions SERIES SGD 5470/5570 Para instrucciones en español, visite: http://bit.ly/pgtassemblyinstructions Parts List ITEM 4 5 6 7 8 9 0 4 5 6 7 8 SGD 5470/5570 PARTS

More information

Mulling & Transom General Installation Instructions

Mulling & Transom General Installation Instructions 1. Overview: This document outlines general recommended instructions for combining Fleetwood s window and door products in the field. Additional detailed information on mulling and transoms is also available

More information

Series 6000 Vinyl Single Hung

Series 6000 Vinyl Single Hung Series 6000 Horizontal Slider Series 6000 Vinyl Single Hung Contents List of Architectural Drawings...6000SH - 3 Elevations - Single Hung...6000SH - 4 Available Sizes - Single Hung...6000SH - 5 Series

More information

(Non Handed Kits) Slotted Hand Screwdriver. Power Driver & Bits. Work Gloves

(Non Handed Kits) Slotted Hand Screwdriver. Power Driver & Bits. Work Gloves Patio Door Kit Assembly Instructions -- 2-Panel Patio Door with Non-Assembled Frame and Assembled Sash Panels. (Non Handed Kits) Project Requirements: ~ This door was manufactured for installation into

More information

Thermally Broken Framing and Door Installation

Thermally Broken Framing and Door Installation INSTALLATION INSTRUCTIONS Thermally Broken Framing and Door Installation IMPORTANT: Read all instructions before beginning installation. These instructions are provided to help prevent installation problems

More information

InSTallaTIon InSTruCTIonS For 4-lITe PaTIo Door unassembled

InSTallaTIon InSTruCTIonS For 4-lITe PaTIo Door unassembled InSTallaTIon InSTruCTIonS For 4-lITe PaTIo Door unassembled Measuring Tape Pencil Shims Drill & Drill bits: 6", 8", 5 6", 7 6" Tools & materials You Will need: Square Hammer or Mallet Level Stiff Putty

More information

Sliding Glass Door Assembly and Installation Guide

Sliding Glass Door Assembly and Installation Guide Sliding Glass Door Assembly and Installation Guide Index Door System Components and Hardware The following components are needed to complete the installation of your Sliding Patio Door unit. Check all

More information

Dear Contractor, I am glad that you are interested in our window rebate program.

Dear Contractor, I am glad that you are interested in our window rebate program. Dear Contractor, I am glad that you are interested in our window rebate program. I have included three documents with this letter. One is our form to indicate your intention to participate in the program.

More information

Series 9000 Vinyl Single Hung

Series 9000 Vinyl Single Hung Series 9000 Single Hung Series 9000 Vinyl Single Hung Contents List of Architectural Drawings...9000SH - 3 Elevations - Single Hung...9000SH - 4 Available Sizes - Single Hung...9000SH - 5 Elevations -

More information

Series 6000 Vinyl Horizontal Slider

Series 6000 Vinyl Horizontal Slider Series 6000 Horizontal Slider Series 6000 Vinyl Horizontal Slider Contents List of Architectural Drawings...6000HS - 3 Elevations - XO or OX...6000HS - 4 Available Sizes - XO or OX...6000HS - 5 Elevations

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Thermally Broken Framing and Door Installation SL-450TB (2" x 4-1/2" with 1" Glazing) & SL-600TB (2" x 6" with 1" Glazing) IMPORTANT: Read all instructions before beginning installation.

More information

STACKING MULTI-SLIDE DOOR SYSTEM INSTALLATION INSTRUCTIONS

STACKING MULTI-SLIDE DOOR SYSTEM INSTALLATION INSTRUCTIONS STACKING MULTI-SLIDE DOOR SYSTEM INSTALLATION INSTRUCTIONS 1290363 Revision 1 12/16 Page 1 Weather Shield Mfg., Inc. NOTICE CAUTION! Failure to install and maintain our product according to these instructions

More information

Doors & Windows. Series 700 Windows, Single Hung Tilt Standard Features. Slider Lock. Vinyl Windows. J-Rail '

Doors & Windows. Series 700 Windows, Single Hung Tilt Standard Features. Slider Lock. Vinyl Windows. J-Rail ' Vinyl Windows Series 700 Windows, Single Hung Tilt Standard Features Constructed with white virgin PVC vinyl 2-3/8" overall frame dimension: 1" face to fin; lap pocket for vinyl siding Fusion welded frame

More information

Knock Down Patio Door Assembly Instructions Regular & Impact

Knock Down Patio Door Assembly Instructions Regular & Impact Knock Down Patio Door Assembly Instructions Regular & Impact 72 x 80 72 x 82 72 x 96 96 x 80 96 x 82 96 x 96 Impress the Weather KD Patio Door Regular & Impact Sizes 72 x 80 72 x 82 72 x 96 96 x 80 96

More information

western window systems westernwindowsystems.com installation instructions non-pocket 2-1/4 panels

western window systems westernwindowsystems.com installation instructions non-pocket 2-1/4 panels series 2600 multi-slide non-pocket 2-1/4 panels windowsystems.com windowsystems.com movement, which can cause warping and other problems. Frame kit components: Each door will have a head assembly, a threshold

More information

AAMA Voluntary Guideline For Engineering Analysis of Window and Sliding Glass Door Anchorage Systems

AAMA Voluntary Guideline For Engineering Analysis of Window and Sliding Glass Door Anchorage Systems A M E R I C A N A R C H I T E C T U R A L AAMA 2501-06 Voluntary Guideline For Engineering Analysis of Window and Sliding Glass Door Anchorage Systems M A N U F A C T U R E R S A S S O C I A T I O N TABLE

More information

Metal & Vinyl, Flush Mount and Recessed Fin Windows Recommended Installation Instructions

Metal & Vinyl, Flush Mount and Recessed Fin Windows Recommended Installation Instructions PO Box 480 Ph: 417-235-7821 Monett, MO 65708 Fax: 417-737-7140 Metal & Vinyl, Flush Mount and Recessed Fin Windows Recommended Installation Instructions These installation instructions are recommendations

More information

INSTALLATION INSTRUCTIONS. Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING

INSTALLATION INSTRUCTIONS. Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING JANUARY, 2014 1 INSTALLATION Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING INSTRUCTIONS 2 FRAME ASSEMBLY JANUARY, 2014 601442 SHEAR BLOCK BALL BEARING NRP BUTT (FACTORY APPLIED

More information

SERIES 5001 SLIDING GLASS DOOR PATIO DOORS INSTALLATION GUIDE

SERIES 5001 SLIDING GLASS DOOR PATIO DOORS INSTALLATION GUIDE PATIO DOORS INSTALLATION GUIDE These instructions cover general installation conditions. Improper installation could affect your doors operation and warranty. Deviations from these instructions should

More information

Pocket Door Installation Instructions

Pocket Door Installation Instructions Installation Instructions Before getting started: Read instructions thoroughly. Be sure that you have the necessary tools and materials before starting the installation. Consult your local building code

More information

Single-Hung Windows Premium Atlantic Aluminum

Single-Hung Windows Premium Atlantic Aluminum TABLE OF CONTENTS Specifications... 2-2 QuickSpecGuide... 2-3 Elevations: Scale Single-Hung-FloridaSizes... 2-4 Grille Patterns... 2-5 SectionDetails: 6 Scale... 2-6 InstallationWallDetails... 2-10 PagethroughthePDFusingthebutonsontheright,

More information

PERFORMANCE TEST REPORT. Rendered to: GLASSCRAFT DOOR COMPANY. PRODUCT TYPE: 6' x 8' Double Inswing Hardwood Door with Half Circle Transom

PERFORMANCE TEST REPORT. Rendered to: GLASSCRAFT DOOR COMPANY. PRODUCT TYPE: 6' x 8' Double Inswing Hardwood Door with Half Circle Transom PERFORMANCE TEST REPORT Rendered to: GLASSCRAFT DOOR COMPANY PRODUCT TYPE: 6' x 8' Double Inswing Hardwood Door with Half Circle Transom Title Uniform Load Deflection Test Pressure Uniform Load Structural

More information

STRUCTURAL PERFORMANCE TEST REPORT

STRUCTURAL PERFORMANCE TEST REPORT Architectural Testing STRUCTURAL PERFORMANCE TEST REPORT TEST #31 Rendered to: COMMERCIAL DOOR SYSTEMS 320 Carner Drive Bensalem, Pennsylvania 19020 Report No: 01-39570.01 Test Date: 06/14/01 Report Date:

More information

Heavy Wall Applied Stop Tube Frame and Door Installation

Heavy Wall Applied Stop Tube Frame and Door Installation INSTALLATION INSTRUCTIONS Heavy Wall Applied Stop Tube Frame and Door Installation Read all instructions before beginning installation. These instructions are provided to help prevent installation problems

More information

Series 9000 Vinyl Horizontal Slider

Series 9000 Vinyl Horizontal Slider Series 9000 Horizontal Slider Series 9000 Vinyl Horizontal Slider Contents List of Architectural Drawings...9000HS - 3 Elevations - XO or OX...9000HS - 4 Available Sizes - XO or OX...9000HS - 5 Elevations

More information

Window Frame Installation Instructions For Nail-on and Block Frames

Window Frame Installation Instructions For Nail-on and Block Frames General The key to any window or door installation is preparation. This extends from storage of the product to the final installation and to all points in between. Careful planning and attention to detail

More information

4. Partially open the operating panel and tilt the top toward the interior of the door (Figure 4). Lift the panel off the sill and set it aside.

4. Partially open the operating panel and tilt the top toward the interior of the door (Figure 4). Lift the panel off the sill and set it aside. Effective Date: 10/1/2017 Tools Needed Kit Contents Hardware Kit Safety Glasses Cordless drill Phillips screw bit Two-step drill bit (3/8-1/8 ) utility knife Interior Mullion Exterior Mullion Cover clamps

More information

SLIDING GLASS DOOR ASSEMBLY INSTRUCTION Series 680/780

SLIDING GLASS DOOR ASSEMBLY INSTRUCTION Series 680/780 10/07 M0200030 GENERAL NOTICE READING THESE INSTRUCTIONS FIRST AND FOLLOWING THE PROCEDURES IN PROPER SEQUENCE WILL REDUCE FRUSTRATION, COSTLY MISTAKES AND WASTED TIME. Protect main frame only with light

More information

Series 7650 Installation Instructions Sliding Glass Door

Series 7650 Installation Instructions Sliding Glass Door Series 7650 Installation Instructions Sliding Glass Door Things to Know Before You Start Things to Know Before You Start Removal of Old Fenestration Products Ensure any old fenestration products are removed

More information

Contemporary 3 Panel Classic 5 Panel French Panel

Contemporary 3 Panel Classic 5 Panel French Panel Contemporary 3 Panel Classic 5 Panel French Panel (X) Operating / Lock Panel Left (O) Fixed Panel Right Note : Glazing Beads For All Panel Face To The Exterior 2 Panel XO Left Is Shown Above Opposite =

More information

Block Frame Inovo Patio Door/Transom/Sidelite Field Mulling Instructions. simonton.com/installation. If mulling sidelites, skip to Step 5.

Block Frame Inovo Patio Door/Transom/Sidelite Field Mulling Instructions. simonton.com/installation. If mulling sidelites, skip to Step 5. Effective Date: 10/1/17 Tools Needed Kit Contents Safety Glasses Cordless Drill Phillips Screw Bit Two-step Drill Bit (3/8-1/8 ) Utility Knife Interior Mullion Exterior Mullion Cover Hardware Kit Clamps

More information

Installation Recommendations for Finless Frame Doors

Installation Recommendations for Finless Frame Doors Installation Recommendations for Finless Frame Doors These installation recommendations are made available by MI Windows and Doors, LLC (MI) to assist with the integration of finless or flange sliding

More information

Visions 2000 Single Hung Tilt Window Parts Reference Catalog

Visions 2000 Single Hung Tilt Window Parts Reference Catalog Visions 2000 Single Hung Tilt Window Parts Reference Catalog (Includes Parts and Information for Single Hung Tilt Picture and Basement and Miscellaneous Parts for Single Hung Tilt Oriel and Single Hung

More information

Air Infiltration The amount of air leaking in and out of a building through cracks in walls, windows, and doors.

Air Infiltration The amount of air leaking in and out of a building through cracks in walls, windows, and doors. Air Infiltration The amount of air leaking in and out of a building through cracks in walls, windows, and doors. Aluminum Clad Sill Heavy extruded aluminum over wood that provides a long lasting, weatherproof

More information

InstallatIon InstructIons for 2-lIte PatIo Door unassembled

InstallatIon InstructIons for 2-lIte PatIo Door unassembled InstallatIon InstructIons for -lite PatIo Door unassembled tools & materials You will need: Measuring Tape Pencil Shims Drill & Drill bits: 6", 8", 5 6", 7 6" Utility Knife High-Performance Premium Silicone

More information

6400, 8400 and 9400 Series Sliding Patio Door

6400, 8400 and 9400 Series Sliding Patio Door Contemporary 3 Panel Classic 5 Panel French Panel 6400, 8400 and 9400 Series Sliding Patio Door (O) Fixed Panel Left (X) Operating / Mullion Panel Right (X) Operating / Lock Panel Left (O) Fixed Panel

More information

SERIES 4070-T GENERAL ASSEMBLY AND INSTALLATION INSTRUCTIONS

SERIES 4070-T GENERAL ASSEMBLY AND INSTALLATION INSTRUCTIONS Table of Contents I. Care and Maintenance... 2 II. Tools / Materials, Sealant Requirements, & Anchor Instructions... 2 III. Structure Verification & Sub-Sillpan Installation... 3 1. Opening Verification...3

More information

INSTALLATION INSTRUCTIONS FOR REPLACEMENT FORGENT WOOD GLASTRA WINDOWS RECOMMENDATIONS FOR COMMON INSTALLATION OF ALL REPLACEMENT WINDOWS.

INSTALLATION INSTRUCTIONS FOR REPLACEMENT FORGENT WOOD GLASTRA WINDOWS RECOMMENDATIONS FOR COMMON INSTALLATION OF ALL REPLACEMENT WINDOWS. INSTALLATION INSTRUCTIONS FOR REPLACEMENT FORGENT WOOD GLASTRA WINDOWS RECOMMENDATIONS FOR COMMON INSTALLATION OF ALL REPLACEMENT WINDOWS. Installer: DO NOT DISCARD Please leave the Installation Guide

More information

1200 SERIES 2 PANEL DOOR rev.1 DETAILED INSTALLATION INTRUCTIONS

1200 SERIES 2 PANEL DOOR rev.1 DETAILED INSTALLATION INTRUCTIONS 1200 SERIES 2 PANEL DOOR 10.2013 rev.1 DETAILED INSTALLATION INTRUCTIONS GENERAL: Door elevations shown in these instructions are as viewed from the outside. X denotes the active or moving panel(s). O

More information

Vinyl Windows Manufactured by VPI Quality Windows

Vinyl Windows Manufactured by VPI Quality Windows Vinyl Windows Manufactured by VPI Quality Windows Part Number: 531&591 Installation 531 & 591 SERIES SLIDING AND HUNG WINDOW INSTALLATION INSTRUCTIONS Installation Instructions for Typical Construction.

More information

SERIES 3070-T MULTI-SLIDE ASSEMBLY & INSTALLATION INSTRUCTIONS

SERIES 3070-T MULTI-SLIDE ASSEMBLY & INSTALLATION INSTRUCTIONS Table of Contents I. Care and Maintenance...2 II. Tools / Material & Sealant Requirements...2 III. Assembly and Installation...2 IV. Glazing Assembly...3 V. Panel Assembly...3 1. X Panel...3 2. O Panel...4

More information

SERIES 360. Single Hung Windows. NOTE: Read instructions completely before attempting any installation.

SERIES 360. Single Hung Windows. NOTE: Read instructions completely before attempting any installation. Installation Instructions SERIES 360 Single Hung Windows Page 2: Opening Preparation and Wood Buck Installation and Figure 1 Page 3-5: Installation Instructions for Series 360 WINDOWS Page 6: Figure 2:

More information

VYTEX PREMIUM SLIDING GLASS DOOR. Table of Contents. Precautions and Safety 2. Tools Required...3. Inspect and Prepare Door...4

VYTEX PREMIUM SLIDING GLASS DOOR. Table of Contents. Precautions and Safety 2. Tools Required...3. Inspect and Prepare Door...4 VYTEX PREMIUM SLIDING GLASS DOOR Table of Contents Precautions and Safety 2 Tools Required...3 Inspect and Prepare Door...4 Hardware and Parts Check List....4 Master Frame Assembly 5 Master Frame Installation..7

More information

Architectural Information Page: Series 514 Double-hung Window Standard Wrap Around Sash Introduction

Architectural Information Page: Series 514 Double-hung Window Standard Wrap Around Sash Introduction Design Features Architectural Information Page: 22. 1 Standard Wrap Around Sash Introduction Scale: Not to scale 1. Successfully tested for compliance with Australian Standard AS 2047. 2. Optional mullion

More information

1Woodwright Insert Windows

1Woodwright Insert Windows 1Woodwright Insert Windows Parts Catalog Main Menu Section TOC Search What s in This Section Double-Hung, Picture & Transom Insert Windows....................... Page 3 Parts Illustration...........................................................

More information

Non-Reinforced Joining Guide (2-Way Horizontal and Vertical Joining) for Andersen 200 Series Tilt-Wash Double-Hung and Transom Windows

Non-Reinforced Joining Guide (2-Way Horizontal and Vertical Joining) for Andersen 200 Series Tilt-Wash Double-Hung and Transom Windows (2-Way Horizontal and Vertical Joining) for Andersen 200 Series Tilt-Wash Double-Hung and Transom Windows Congratulations! You have just purchased one of the many fine Andersen products. Proper assembly,

More information

Installation Guidelines For ALUMINUM M-SERIES 3 PANEL SLIDING DOOR

Installation Guidelines For ALUMINUM M-SERIES 3 PANEL SLIDING DOOR www.quakerwindows.comv www.quakercommercialwindows.com PO Box 128 504 Highway 63 South Freeburg, MO 65035 800-347-0438 573-469-4151 (fax) Installation Guidelines For ALUMINUM M-SERIES 3 PANEL SLIDING DOOR

More information

Rhino series thermally broken 2 3/8" aluminum windows Information book

Rhino series thermally broken 2 3/8 aluminum windows Information book Gerkin Windows & Doors P.O Box 3203 Sioux City IA. 51102 Phone: (402) 494-6000 (800) 475-5061 Fax: (402) 494-6765 Web site: www.gerkin.com E-Mail: gerkin @gerkin.com Rhino series thermally broken 2 3/8"

More information

POCKETING MULTI-SLIDE DOOR SYSTEM

POCKETING MULTI-SLIDE DOOR SYSTEM PMSD POCKETING MULTI-SLIDE DOOR SYSTEM INSTALLATION INSTRUCTIONS READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ANY INSTALLATION! CAUTION Lead-based paint may be present in older homes, and the removal

More information

Curtain Wall Installation Guide

Curtain Wall Installation Guide Curtain Wall Installation Guide Curtain Wall Installation Guide 1 IMPORTANT NOTICES! Important Notices & Information Manufacturer s Notes: The building envelope must be correctly prepared with weather

More information

Please read and understand all instructions before beginning. These instructions cover the non-impact aluminum sliding glass door.

Please read and understand all instructions before beginning. These instructions cover the non-impact aluminum sliding glass door. The performance and proper operation of a door is only as good as the installation. By following these instructions, the probability of a good installation greatly increases. Please read and understand

More information

Flashing Materials. Rough Opening Preparation

Flashing Materials. Rough Opening Preparation Installation Instructions for CertainTeed New Construction Windows Handling vinyl windows CAUTION: Always store vinyl windows and doors in an upright position on a slight angle. Never lay them flat or

More information

Installation Guidelines for all Quaker products with nail fins New Construction nail fin installation with a Zip sheathing system.

Installation Guidelines for all Quaker products with nail fins New Construction nail fin installation with a Zip sheathing system. www.quakerwindows.com www.quakercommercialwindows.com PO Box 128 504 Highway 63 South Freeburg, MO 65035 800-347-0438 573-469-4151 (fax) Installation Guidelines for all Quaker products with nail fins New

More information

TAS 201, TAS 202, TAS 203 and ASTM E330 PERFORMANCE TEST REPORT. Rendered to: DIAMOND DOOR PRODUCTS

TAS 201, TAS 202, TAS 203 and ASTM E330 PERFORMANCE TEST REPORT. Rendered to: DIAMOND DOOR PRODUCTS Architectural Testing TAS 201, TAS 202, TAS 203 and ASTM E330 PERFORMANCE TEST REPORT Rendered to: DIAMOND DOOR PRODUCTS SERIES/MODEL: Diamond GEM 130 MPH Series PRODUCT TYPE: Out-Swing Steel Entry Door

More information

CROSSBAR RAFTER ISOMETRIC

CROSSBAR RAFTER ISOMETRIC Super Sky Products' typical glazing system consists of glass panels or "lites" which are attached to the main framing members using extruded aluminum "retainers" or "pressure plates". These retainers are

More information

Installation Guidelines For Quaker Window Products Aluminum flange fin sub sill & receptor system using a T mulled twin window unit.

Installation Guidelines For Quaker Window Products Aluminum flange fin sub sill & receptor system using a T mulled twin window unit. Installation Guidelines For Quaker Window Products Aluminum flange fin sub sill & receptor system using a T mulled twin window unit. Installer: Read these instructions completely before starting any installation.

More information

Please read and understand all instructions before beginning. These instructions cover the non-impact aluminum French Door 101.

Please read and understand all instructions before beginning. These instructions cover the non-impact aluminum French Door 101. The performance and proper operation of a door is only as good as the installation. By following these instructions, the probability of a good installation greatly increases. Please read and understand

More information

4300Wi WOOD INTERIOR CASEMENT VINYL WINDOW gerkin.com

4300Wi WOOD INTERIOR CASEMENT VINYL WINDOW gerkin.com 00Wi 800.75.506 gerkin.com 00Wi Decades Of Proven Performance Gerkin is one of the industry s most respected manufacturers of vinyl window and door products. We blend new material technology with innovative

More information

Aluminium Window Scheme to BS4873 & PAS24:2016

Aluminium Window Scheme to BS4873 & PAS24:2016 SCOPE OF CERTIFICATION Aluminium Window Scheme to BS4873 & PAS24:2016 Manufacturer of Enhanced Security Windows in accordance with the Exova BM TRADA Q-Mark Scheme requirements. (Check with Secured by

More information

Fold-A-Way Patio Door ASSEMBLY & INSTALLATION GUIDE

Fold-A-Way Patio Door ASSEMBLY & INSTALLATION GUIDE Fold-A-Way Patio Door ASSEMBLY & INSTALLATION GUIDE This instruction guide provides the minimum recommended procedures to correctly prepare the rough opening, install a fold-a-way patio door unit and apply

More information

7500/7550 Series Casement Windows (2002 to 2010)

7500/7550 Series Casement Windows (2002 to 2010) 7500/7550 Series Casement Windows (2002 to 2010) What s in This Section Standard and Custom Windows...................................... Page 3 Parts Illustration...........................................................

More information

Tools required by installer: Materials required by installer:

Tools required by installer: Materials required by installer: Installation Guidelines For Quaker Window Products Vinyl product line (Single Hung, Double Hung, Sliding Window, Fixed Window, Casement, Awning, and Hopper) Installer: Read these instructions completely

More information

ASSEMBLY AND INSTALLATION INSTRUCTIONS for Premium Aluminum and Premium Atlantic Aluminum Sliding Patio Doors (JII020)

ASSEMBLY AND INSTALLATION INSTRUCTIONS for Premium Aluminum and Premium Atlantic Aluminum Sliding Patio Doors (JII020) for Premium Aluminum and Premium Atlantic Aluminum Sliding Patio Doors (JII020) Thank you for selecting jeld-wen products. Attached are jeld-wen s recommended installation instructions for Premium Aluminum

More information

Installation Instructions

Installation Instructions edium + Heavy duty READ BEFORE INSTALLING UNIT Preliminary instructions: 1. Check window opening size: the mounting parts furnished with this air conditioner are made to install in a wooden sill double-hung

More information

READ BEFORE INSTALLING UNIT INSTALLATION WARNINGS AND CAUTION

READ BEFORE INSTALLING UNIT INSTALLATION WARNINGS AND CAUTION edium + Heavy duty READ BEFORE INSTALLING UNIT INSTALLATION WARNINGS AND CAUTION Carefully read the installation manual before beginning. Pay attention to danger and safety notices. be exposed: Carefully

More information

METL-VISION WINDOW SYSTEM FOR HORIZONTAL WALL PIONEERING INSULATED METAL PANEL TECHNOLOGY

METL-VISION WINDOW SYSTEM FOR HORIZONTAL WALL PIONEERING INSULATED METAL PANEL TECHNOLOGY METL-VISION WINDOW SYSTEM FOR HORIZONTAL WALL Window assembly GUIDE PIONEERING INSULATED METAL PANEL TECHNOLOGY PIONEERING INSULATED METAL PANEL TECHNOLOGY CONTENTS DETAIL TITLE FILE NO. PAGE NO. INTRODUCTION..................................................................

More information

Installation Instructions Double-Hung, Single-Hung, Casement, Awning, Sliding, Picture & Shapes Non-Impact & Impact Resistant Nailing Fin Windows

Installation Instructions Double-Hung, Single-Hung, Casement, Awning, Sliding, Picture & Shapes Non-Impact & Impact Resistant Nailing Fin Windows Installation Instructions Double-Hung, Single-Hung, Casement, Awning, Sliding, Picture & Shapes Non-Impact & Impact Resistant Nailing Fin Windows americancraftsmanwindows.com Project Requirements: Read

More information

Designed for Your Life. Guaranteed. Premium Vinyl Replacement Windows

Designed for Your Life. Guaranteed. Premium Vinyl Replacement Windows by Designed for Your Life. Guaranteed. Premium Vinyl Replacement Windows Silent Guard Double Hung windows Introducing the Silent Guard Window a replacement window line specifically manufactured with our

More information

Revision Date: April 01, Paramount Enclosure

Revision Date: April 01, Paramount Enclosure Paramount Enclosure www.urbanindustries.com 15 Urban Industries, Inc. 2008 Tools The following tools are recommended for the installation of the Paramount Aluminum Enclosure and roof. 1 2 Level 1 4 Level

More information

Eagle clad double-hung window installation instructions

Eagle clad double-hung window installation instructions Eagle clad double-hung window installation instructions These instructions are for typical installation in new typical wood frame wall construction. These instructions and methods are not intended for

More information

Featuring classic style combined with the latest in innovative window technology, the Sierra Pacific aluminum clad. Carmel Double Hung

Featuring classic style combined with the latest in innovative window technology, the Sierra Pacific aluminum clad. Carmel Double Hung Featuring classic style combined with the latest in innovative window technology, the Sierra Pacific aluminum clad window is a true aesthetic beauty. No visible PVC jambliners to mar the beauty of the

More information

SYSTEMS ALUMINUM WINDOW ACCESSORIES gerkin.com

SYSTEMS ALUMINUM WINDOW ACCESSORIES gerkin.com 800.475.5061 gerkin.com SUBFRAME SYSTEM FEATURES Gerkin subframe is a thermally broken receptor system that is designed to make window installation quick, easy and can be used in both new construction

More information

EURO (3876) Euro-C2 Installation Instructions Euro-Wall Systems, LLC

EURO (3876)   Euro-C2 Installation Instructions Euro-Wall Systems, LLC 888.989.EURO (3876) www.euro-wall.com Euro-C2 Installation Instructions Installation Instructions Euro-C2 step A.1) Assemble Bottom corner Pre-caution: it is recommended to use screw wax to prevent screw

More information

~ CONSTRUCTION CONSULTING LABORATORY, INTERNATIONAL

~ CONSTRUCTION CONSULTING LABORATORY, INTERNATIONAL ~ ~ CONSTRUCTION CONSULTING LABORATORY, INTERNATIONAL TEST REPORT: ASTM E 330-97 PERFORMANCE TEST U.S. ALUMINUM JC-462/M-411 Prepared for: UNITED STATES ALUMINUM CORPORATION 200 Singleton Drive Waxahachie,

More information

Heavy Wall Applied Stop Tube Frame and Door Installation

Heavy Wall Applied Stop Tube Frame and Door Installation INSTALLATION INSTRUCTIONS Heavy Wall Applied Stop Tube Frame and Door Installation IMPORTANT: Read all instructions before beginning installation. These instructions are provided to help prevent installation

More information

Note: Installation and Glazing Manuals are product specific. FOR REVIEW ONLY! FEBRUARY 2012

Note: Installation and Glazing Manuals are product specific. FOR REVIEW ONLY! FEBRUARY 2012 Note: Installation and Glazing Manuals are product specific. FOR REVIEW ONLY! Phone: 1-866-OLDCASTLE (653-2278) Web Address: www.oldcastlebe.com FG-1000 & FG-2000 INSTALLATION & GLAZING INSTRUCTIONS These

More information

I n s t a l l a t i o n I n s t r u c t i o n s S E N T I N E L S E R I E S 1 50 SLIDING GLASS DOORS

I n s t a l l a t i o n I n s t r u c t i o n s S E N T I N E L S E R I E S 1 50 SLIDING GLASS DOORS I n s t a l l a t i o n I n s t r u c t i o n s S E N T I N E L S E R I E S 1 50 SLIDING GLASS DOORS Page 2-9: Installation Instructions, Figures 1, 2, & 3 Page 10-12: Figures A-1, A-2, & A-3: Installation

More information

UNIFIED FACILITIES GUIDE SPECIFICATIONS

UNIFIED FACILITIES GUIDE SPECIFICATIONS USACE / NAVFAC / AFCEC / NASA UFGS-08 51 69.10 (April 2006) ----------------------------- Preparing Activity: NAVFAC Replacing without change UFGS-08582 (August 2001) UNIFIED FACILITIES GUIDE SPECIFICATIONS

More information

Vinyl Windows and Doors Manufactured by VPI Quality Windows

Vinyl Windows and Doors Manufactured by VPI Quality Windows Vinyl Windows and Doors Manufactured by VPI Quality Windows Part Number: 511_Installation ENDURANCE CASEMENT\AWNING\PW INSTALLATION INSTRUCTIONS Installation Instructions for Typical Construction These

More information

YVS 400 TU Window System

YVS 400 TU Window System YVS 400 TU SYSTEM DESCRIPTION YVS 400 TU PERFORMANCE FEATURES 4 Overall Depth ThermaBond Plus Poured & Debridged Thermal Break Variations: Single Hung, Double Hung & Fixed Windows 1 /8 & 1 1 /16 Glazing

More information

Series Sloped glazed Curtain wall. Installation Instructions

Series Sloped glazed Curtain wall. Installation Instructions Series 5600 Sloped glazed Curtain wall Installation Instructions Part NO. Y308 February 2013 SECTION TABLE OF CONTENTS PAGE I. General Notes & Guidelines. 3-4 II. Gutter and Mullion Assembly.. 5 III. End

More information

4500 Series. Fabrication and Installation Instructions

4500 Series. Fabrication and Installation Instructions 4500 Series Fabrication and Installation Instructions E4500 Series July, 2017 Table of Contents GENERAL CONSTRUCTION NOTES... 3 EXTRUDED ALUMINUM PARTS... 5 ACCESSORIES... 7 OVERVIEW... 8 FRAME FABRICATION...

More information

SENTINEL SERIES 110 SINGLE HUNG WINDOWS

SENTINEL SERIES 110 SINGLE HUNG WINDOWS Installation Instructions SENTINEL SERIES 110 SINGLE HUNG WINDOWS Page 2: Opening Preparation, Wood Buck Installation and Figure 1 Page 3-6: Installation Instructions and Figure 2 Page 7: Figure 3: Installation

More information