Visit us at or
|
|
- Gilbert Lewis
- 6 years ago
- Views:
Transcription
1 Features of AFA server rack 1. Disassembled packing, saving shipping space and warehouse storage. 2. Latest out looking design: double section side panels; pluggable front door, rear door and external hinges; embedded castors design. 3. Special designed frame could be connected by 8 pieces of screws. Cabinet is with very high intensity, maximum static loading capacity is up to 1300kgs. 4. Both front and rear doors are with two-point locking design, therefore doors and frames fit tight. 5. Sliding and adjustable cable entries at top and bottom, edges of the cable entries are with the design to prevent cut wires. 6. Fan units are installed from outside of cabinets, easy to install and maintain. 7. Internal cabinets reserve the dedicated channel alignment. 8. Installation positions of mounting rails could be adjusted quickly. 9. Cabinet structure is with patent. 10. Maximum static loading capacity: 1300kgs
2 Top Cable entries on the top/bottom are with adjustable sizes. Cable entry panels are with the bended edges, protecting the cables from cutting.
3 Top panel Frames are limited by the bending of top plates which ensure good rigidity, no parallelogram will be caused.
4 Mounting angles and mounting rails Special designed mounting angles which are nearly to closed condition, ensure good intensity. Mounting rails are inserted safely and stably into the mounting angles, could be installed and positioned quickly.
5 Top crossbeam Both ends of top crossbeams are welded with thick closed strengthen plates, which ensures rigidity of top crossbeams.
6 Frames Special designed frames with high intensity to ensure the maximum loading capacity. Static loading capacity is up to 1300kgs.
7 Castor pallets and side frames Multi-bending craft and thick plate design ensure the good rigidity of castor pallets. Castors pallets and special bending bear the equipments weight transferred from the side mounting angles.
8 Castors Embedded castors design
9 Cable entries at bottom Sliding and adjustable cable entries at bottom, edges of the cable entries are with the design to prevent cut wires.
10 Adjustable feet 4 pieces of adjustable feet included in each cabinet. Wheels and feet could be installed simultaneously
11 Baying kits How to baying the cabinets: remove the side panels, install the metal plates by 2 screws.
12 Anti-tilt bracket Installation holes of anti-tilt brackets are available. Anti-tilt brackets could be installed to prevent the cabinets from dumping when heavy sliding equipments installed.
13 Plinth Install to the mounting holes of adjustable feet.
14 Double section door Double section door is with two-point locking design, therefore doors and frames fit tight.
15 Single section door Single section door is with two-point locking design, therefore doors and frames fit tight.
16 Side panels Side locks are with burglar and quick open functions. Side panels are with split design, light weight and easy to remove.
17 Frames Frames are connected by 8 screws only, internal frames are pre-assembled. Channel alignment is reserved in vertical direction.
Factory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
More informationInner Width (w1) mm
inorax-st Network Cabinet Inorax-ST, a cost effective network rack cabinet system ful lls high density cabling and data center requirements. ith its modular structure, a practical option for your future
More informationIBM xseries 345 Third Party Slide Rail Kit
RackSolutions.com Patent(s) Pending IBM xseries 345 Third Party Slide Rail Kit Installation Instructions Kit P/N: 2URAIL-IBM-345 info@racksolutions.com Technical Support & Sales 903.453.0801 Kit Contents
More informationASSEMBLY MANUAL WALL MOUNT RACK SR-WM-10U SR-WM-12U SR-WM-16U
ASSEMBLY MANUAL WALL MOUNT RACK SR-WM-10U SR-WM-12U SR-WM-16U STRONG WALL MOUNT RACKS Strong equipment wall racks are available in sizes 10U, 12U, and16u, and are constructed with 11 gauge (3mm) thick
More informationRMA RMA. Welded cabinet with removable side panels and rear cover, IP20, capacity 400 kg
RM 0 0 0 0 0 1 1 0 0 1 0 0 0 1 1 1 1 0 1 0 1 0 1 0 1 1 1 1 RM Welded cabinet with removable side panels and rear cover, IP20, capacity kg 19 RM Rigid construction RM has a robust welded construction. High
More informationCopyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax
Copyright 2003. Black Box Corporation. All rights reserved. 1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746 JULY 2003 RM3010A RM315-R2 RM323-R2 RM329 RM451 RM457 RM3020A RM316 RM324-R2
More informationMighty Mo GX Series Cabinet Installation Guide. OR Rev /11
Mighty Mo GX Series Cabinet Installation Guide OR-71601787 Safety and Warning ATTENTION The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating
More informationPlease read these instructions before use and keep for future reference
Wardrobe Assembly Guide Allen Key Provided (if required) Philips Screwdriver Required Hammer Required Please read these instructions before use and keep for future reference Caution! Two Person Assembly
More information4 Post Adapter Kit for Dell PowerEdge 2U & 3U
RackSolutions.com Patent(s) Pending 4 Post Adapter Kit for Dell PowerEdge 2U & 3U Installation Instructions Kit P/N: 2UKIT-101 Kit P/N: 2UKIT-106 info@racksolutions.com Technical Support & Sales 903.453.0801
More informationASSEMBLY MANUAL WALL MOUNT RACK SWING KIT SR-WM-SWING-10U-3IN SR-WM-SWING-12U-3IN SR-WM-SWING-16U-3IN
ASSEMBLY MANUAL WALL MOUNT RACK SWING KIT SR-WM-SWING-10U-3IN SR-WM-SWING-12U-3IN SR-WM-SWING-16U-3IN STRONG WALL MOUNT SWING KITS Strong Equipment Racks are available in sizes 10U, 12U, and16u, and are
More informationaluminium profile system
aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction
More informationBi-Pass And Bi-Fold Sliders
Bi-Passs and Bi-Fold Sliders Installation Guide Bi-Pass And Bi-Fold Sliders Tools required: Hand Drill Counter Sink Drill BitSet #8 Philips Screw Driver Measuring Tape Level What s Included: Panels with
More informationCM543 STOP READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID
CM543 STOP READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID NET-SERV Co-Location Cabinet (S752S2C122B) Panduit Corp. 2011 INSTRUCTIONS CM543 FRONT OF CABINET REAR OF CABINET NOTE:
More informationTried-and-tested quality.
Tried-and-tested quality. Rugged single and full-extension drawer slides in tried-and-tested quality for top requirements. www.grass.at, info@grass.eu Roller slides Tried-and-tested quality and functionality.
More informationSTOP. V00029AC Rev. 04 READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID TOOL LIST. NET-ACCESS S-Type Network Cabinets
Rev. 04 STOP READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID NET-ACCESS S-Type Network Cabinets -Phillips screwdriver -Flatblade screwdriver -22mm socket wrench -15mm socket wrench
More informationATTRACTION drawer. Twin-walled seel drawer. Complete. 50 Kilos resistance. indamatic. Range of concealed runners up to. self closing and soft closing.
F U R N I T U R E F I T T I N G S M A N U F A C T U R E R Twin-walled seel drawer. Complete Range of concealed runners up to 50 Kilos resistance. indamatic self closing and soft closing. Double wall 405
More informationNetRack. Please take a moment to make sure that you received everything that s included with your order. Each product is described below.
What You Should Have Received NetRack DECEMBER 2002 RM500A-R3 RM507-R2 RM501-R3 RM508-R3 RM502-R2 RM314 RM503-R3 RM315-R2 RM505A-R3 RM615-R2 RM506-R3 Please take a moment to make sure that you received
More informationV00029KX READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID
READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID Net-Verse D-Type Cabinets Tool List 10mm Socket Wrench 122mm (48 ) Level 19mm Wrench 8mm Hex Drive T25 Torx driver Net-Verse D-Type
More informationAssembly Instructions
Assembly Instructions * Pro Version shown Platform - Safety Rail Assembly Platform - Safety Rail Assembly IMPORTANT: To avoid assembly problems follow these instructions exactly. Note: If assembling the
More informationSRS IT cabinets. Installation height numbering as a standard
Among the core products of BKT ELEKTRONIK are metal IT cabinets and casings and related metal accessories. Cabinets are intended for passive and active network equipment with standard dimensions of 10",
More informationPowerware Series. Eaton Rail Kit 9- and 12-Slot Cabinets Installation Guide
Powerware Series Eaton 9170 + Rail Kit 9- and 12-Slot Cabinets Installation Guide Eaton and Powerware are registered trademarks of Eaton Corporation or its subsidiaries and affiliates. Phillips is a registered
More informationCM340B STOP READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING SERVER CABINET FROM SKID
CM340B STOP READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING SERVER CABINET FROM SKID NET-ACCESS Server Cabinets Panduit Corp. 2010 INSTRUCTIONS CM340B CS1 (1) Base Cabinet (2) Solid Side Panels
More informationEF-Series EuroFrame Gen 2 Cabinet System User Manual
EF-Series EuroFrame Gen 2 Cabinet System User Manual www.chatsworth.com +44 1628 524-834 (UK) 2017 Chatsworth Products, Inc. All rights reserved. Chatsworth Products, Clik-Nut, CPI, CPI Passive Cooling,
More informationWinthrop (864) Bungalow, Tree of Life
Compatibility: 864TRV, 864HH, 864ST Fireplace Packing List: Left and Right Side Door with (2) Magnets Each (2) Door Handles (4) Optional Mesh Screen Inserts (Bungalow Only) (2) Hinge Brackets (for mounting
More information19-in. Mini-Rack Cabinet, Type 1
Spec-00466 19-in. DP FX (763) Mini-Rack 422-2588 422-2661 Cabinet, Components and Accessories Free-Stand Networking Cabinets 19-in. Mini-Rack Cabinet, Type 1 Industry Standards NEMA Type 1 EIA 310-D /
More informationLOW-PROFILE WALLMOUNT CABINETS
USER MANUAL RMT35X SERIES LOW-PROFILE WALLMOUNT CABINETS 24/7 AT OR VISIT BLACKBOX.COM TABLE OF CONTENTS SAFETY INFORMATION... 3 Receiving, Unpacking, and Removing the Low-Profile Wallmount Cabinet from
More informationY1160A EIA Rack Sliding Shelf Installation Note
Y1160A EIA Rack Sliding Shelf Installation Note This installation note contains procedures for mounting L4400 Series LXI instruments in EIA rack cabinets using the Y1160A sliding shelf rack mount kit.
More informationFEET, WHEELS, FLOOR FASTENINGS, SUPPORTS
SYSTEM COMPONENTS FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS s t r oppu S, s gn i n e t s af r oo l F, s l eehw, t e ef FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS 136 MINITEC PROFILE SYSTEM BASE AND TRANSPORT
More informationOnSite 19 /15U Wall Rack Model WR-15U
WR-15U November 2018 001-01-000091 Rev.001 OnSite 19 /15U Wall Rack Model WR-15U 1. OVERVIEW... 1 2. APPLICATIONS... 1 3. DESCRIPTION... 2 4. INSTALLATION... 2 5. TESTING AND TROUBLESHOOTING... 5 6. CUSTOMER
More informationREC Series Rack Installation Guide
REC Series Rack Installation Guide 1 REC Series Rack Installation Guide TABLE OF CONTENTS SECTION SAFETY WARNINGS 1 600 WIDE EXPLODED VIEW 2 800 WIDE EXPLODED VIEW 3 SWITCHING DOOR HANDING 4 STABILIZING
More information4Post and 2Post Sliding Rails for Lenovo/IBM M5
Patent(s) Pending 4Post and 2Post Sliding Rails for Lenovo/IBM M5 4Post Page 2 2Post Center Page 4 Installation Instructions Kit P/N: 122-4818 Kit Contents Kit Contents: (2) (Left & Right) (2) Inner Rail
More informationPATENTED NO WELD SYSTEM!
PATENTED NO WELD SYSTEM! Patented no weld aluminium batten system Various batten sizes snap onto simple fixing clip Fit to face of walls and ceilings or between pillars or posts Cut to size system with
More informationStandard Product. Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories
Spec-00466 F763.422.2661 763.422.2588 Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories 19-in. Mini-Rack
More informationN-Series TeraFrame Gen 3 Cabinet System User s Manual
N-Series TeraFrame N-Series TeraFrame Gen 3 Cabinet System User s Manual techsupport@chatsworth.com www.chatsworth.com 2014 Chatsworth Products, Inc. All rights reserved. Chatsworth Products, CPI, CPI
More informationOnSite 19 /15U Wall Rack Model WR-15U
WR-15U Aug 2017 001-01-000091 Rev.000 OnSite 19 /15U Wall Rack Model WR-15U 1. OVERVIEW... 1 2. APPLICATIONS... 1 3. DESCRIPTION... 2 4. INSTALLATION... 2 5. TESTING AND TROUBLESHOOTING... 5 6. CUSTOMER
More informationFURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS
www.hafeleindia.com FURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS ABOUT ITALIANA FERRAMENTA ITALIANA FERRAMENTA is specialized in the production of high quality accessories and ironmongery
More informationCROWN IMPERIAL ASSEMBLY INSTRUCTIONS
CROWN IMPERIAL ASSEMBLY INSTRUCTIONS Standard Drawer Box Page 1 of 14 Standard Drawer Box Parts Parts Supplied B C D A E F G Page 2 of 14 Part Letter Part Name Quantity 300-600 Deep Pan A Base Panel 1
More informationGF-Series GlobalFrame
GF- Series GlobalFrame GF-Series GlobalFrame Gen 2 Cabinet System User s Manual 2013 Chatsworth Products, Inc. All rights reserved. CPI, CPI Passive Cooling, MegaFrame, Saf-T-Grip, Seismic Frame, SlimFrame,
More informationMOVENTO. The Evolution of Motion
The Evolution of Motion is the latest advancement in concealed runner technology. It brings together all of the features, innovations and benefits that Blum has developed since first manufacturing drawer
More informationSlide Rail Kit DVA-ASRK-28A DVA-ASRK-36A. Installation Manual
Slide Rail Kit DVA-ASRK-28A DVA-ASRK-36A en Installation Manual Slide Rail Kit Installation Manual Table of Contents en 3 Table of Contents 1 Introduction.......................................................................
More informationParamount Enclosure. Installation Guide
Paramount Enclosure Installation Guide Wright Line LLC 160 Gold Star Boulevard Worcester, MA 01606 Tel: 800-225-7348 508-852-4300 Fax: 508-365-6178 info@wrightline.com All products and company names are
More informationEaton Data Center Racks
Eaton Data Center Racks U 1. Product Overview In today's world, network equipment is one of the most important investments a business can make. How you store and protect this equipment is just as crucial.
More informationNEWS Part. N /0 MINITEC NEWS
NEWS 2009 Part. N 95.0423/0 MINITEC NEWS 2009 1 TABLE OF CONTENT INTRODUCTION CONTENTS 3 END CAP Z WITH HAMMER TAPS 3 END CAP 45X45 VA 4 ANGLE 25 GD-Z 4 ANGLE 45X90 GD-Z 5 ANGLE 90 GD-Z 5 HINGE 19 S 6
More information10-PIECE. Garage Storage Set OWNER'S MANUAL. Patent pending
10-PIECE Garage Storage Set OWNER'S MANUAL Patent pending IMPORTANT When you open the cartons, carefully check the units and make sure there IS NO damage. If you have any problems with the units or with
More informationMounting Instructions Item No.: xxx
Mounting Instructions Item No.: 271.92.xxx Wall-Beds 1 General Notes For vertical folding beds Successful and safe installation of Bed-Lift and construction of casework requires a professional skill level
More informationFA968800TX Manchester Fireplace Console - Brown Mahogany Assembly Instructions
FA968800TX Manchester Fireplace Console - Brown Mahogany Assembly Instructions For assistance with assembly, contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com www.seidal.com
More information2Post Flush Racking System
RackSolutions.com Patent(s) Pending 2Post Flush Racking System Installation Instructions Kit P/N: 4UKIT-003BLK for 1U 7U Servers info@racksolutions.com Technical Support & Sales 903.453.0801 Kit Contents
More informationHeacent 3D printer assembly manual. Prusa i3
Heacent 3D printer assembly manual Prusa i3 Y-axis assembly 1. Y axis motor section: Find the belowing parts bag, Y-axis motor Assembled parts are separated as shown below, note that the motor between
More informationCW-Type Wall Mounted Cabinets Installation Instructions
Instruction Sheet 860446194 Issue 2, March 2013 CW-Type Wall Mounted Cabinets Installation Instructions General CommScope wall mount cabinets are available in 24-inch (610mm), 36-inch (914mm) and 48-inch
More information4Post and 2Post Universal Shelf System for 19 Racks
Patent(s) Pending 4Post and 2Post Universal Shelf System for 19 Racks Installation Instructions Kit P/N: 108-4013 108-4261 Kit Contents (1) Shelf (2) Rear Brackets Front Hardware Kit (4) 8-32 x.375 Flat
More informationIR-2012, IR-2022 studio rack
IR-2012, IR-2022 studio rack assembly instructions Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de
More informationABM International, Inc. Navigator Assembly Manual
ABM International, Inc. 1 1.0: Parts List Tablet (Qty. 1) Tablet mount (Qty. 1) NOTE: Mount may appear and operate different then image below Control Box (Qty. 1) Motor Power Supply (Qty. 1) 2 X-axis motor
More information25-200H. 12 Planer / Jointer. with Helical Cutterhead. Parts List.
25-200H 12 Planer / Jointer with Helical Cutterhead 4001824 Parts List www.rikontools.com CABINET ASSEMBLY PARTS EXPLOSION & PARTS LIST KEY NO. DESCRIPTION KEY NO. DESCRIPTION 1 Pan Head Screw M6x12 P25-200H-1
More informationMAXIMA TRADITIONAL JUST ASK FOR THE WOOD GATE HARDWARE QUICK & EASY TO INSTALL AVOID TYPICAL INSTALLATION PROBLEMS END USER SATISFACTION
ORNAMENTAL GATE HARDWARE JUST ASK FOR THE MAXIMA TRADITIONAL QUICK & EASY TO INSTALL Patent No. 4,871,203 No. 4,690,440 j j j j j PRE-ASSEMBLED You do not have to put it together EASIEST INSTALLATION Two
More informationPREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
PROFILE SYSTEM PRE-ASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS s r ood gni d i l s dna gni t f i l r o f s t neme l e de l bme s s a - er P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS MINITEC
More informationTIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together
More informationAllow 60 from door face
Setbacks Allow 60 from door face TOOLS NEEDED Tape Measure Marker or Pencil Masonry Drill Bit 3/8 Hammer Drill Hammer Socket Wrenches and Wrench: 9/16, 1/2, 7/16, 1/4 drive socket wrench and 1/2 socket
More information300 Series Racks. 19" Wide Opening Stand-Alone Wall Cabinet with Adjustable Rails. Applications. Features. In The Box. Options
300 Series Racks 19" Wide Opening Stand-Alone Wall Cabinet with Adjustable Rails Applications The 300 Series is ideal to house electronic equipment for any type of application, both commercial and residential,
More informationOPA-11. Communications & Data Seismic Solutions. OSHPD Pre-Approved Numbers
OPA-11 Communications & Data Seismic Solutions OSHPD Pre-Approved Numbers OSHPD Pre-Approved Numbers Cooper B-Line is committed to supporting your networks and data systems securely in areas with seismic
More informationZ4- Series SeismicFrame
Z4- Series SeismicFrame Z4-Series SeismicFrame Cabinet System User s Manual While every effort has been made to ensure the accuracy of all information, CPI does not accept liability for any errors or omissions
More informationNetShelter VS Enclosure. User s Manual
NetShelter VS Enclosure User s Manual Contents Product Description...1 NetShelter VS enclosures.......................... 1 Product Features.................................... 2 Hardware, grommets, and
More informationTOYOTA TUNDRA CARGO DIVIDER Preparation. Part Number: PT
Preparation Part Number: PT767-34070 Kit Contents 1 1 Divider Screen 2 1 LH Bracket with Warning Label 3 1 RH Bracket without Warning Label NOTE: Part number of this accessory may not be the same as the
More informationPRODUCT INFORMATION Penco Wide-Span Shelving
PRODUCT INFORMATION Penco Wide-Span Shelving 2946 Larimer St. Denver, CO 80205 303-295-1100 / 800-373-7693 FAX 303-295-2464 Email info@snyderequipment.com www.snyderequipment.com Wide Span Shelving Penco
More informationInstalling the Exterior Cosmetics
This chapter describes how to install the exterior cosmetics on the Cisco NCS 6000 LCC and includes the following topics: Overview of the Exterior Cosmetics, page Installing the Front Exterior Cosmetics,
More informationMAG-CONV Basic, 48, 48R & Midline Front Mount
Parts Required: Tools Used: Mag Wheels Brakes Brake Rods Mounting Bracket Anti Tippers 7/16" Wrench Screw Driver Rubber Mallet 5/8 Wrench 5mm Allen Wrench Step Execution Figures 1 Remove front 5" total
More informationKitchen Fittings Hanging Cabinets and Accessories
Cabinet hanger Knock-in version, load bearing capacity 130 kg/pair Depth adjustment Finish: Galvanized Concealed mounting of cabinet hanger behind the rear panel (Min. 16 mm free space required) Mounting
More informationEmagiKit. Privacy Pod Plus. Quiet. Easy. Affordable. INSTRUCTIONS ASSEMBLY
EmagiKit Privacy Pod Plus Quiet. Easy. Affordable. INSTRUCTIONS ASSEMBLY DIMENSIONS AND COMPONENTS 47 47 Ceiling Unit 2-B 2-L 2-R Glass Door Corner Trim Door Handle 90 Adjustable Height Work Surface 1-B
More informationOrbital Truss Kiosk 02
Orbital Truss Kiosk 02 OR-KIOSK-02 Orbital Express Truss Kiosks are the perfect way to display media and/or literature at any trade show, event, retail or corporate space. Kiosks complement the Orbital
More informationFree Wheelchair Mission GEN 2 Assembly
Free Wheelchair Mission GEN 2 Assembly This guide contains instructions detailing how to assemble your GEN 2. Written By: Garrett Goff ifixit CC BY-NC-SA www.ifixit.com Page 1 of 10 TOOLS: 10mm Wrench
More informationSection 8. Curved units. Curved units
Section 8 Curved units Curved units Curved corner post... page 94 Curved base cabinet... page 95 Curved wall cabinet... page 96 Curved deep wall cabinet... page 97 Curved plinth - Joining... page 99 www.howdens.com
More informationSection 9: Finishing Touches - Other Decor Units
Section 9: Finishing Touches - Other Decor Units Butler Sink Units Important: This unit is designed to be used with either This unit is always used between other units. Level the units. Fix together and
More informationThis procedure will cover the steps to properly pack up the ARES for shipment.
TA Instruments Packing the ARES Instrument This procedure will cover the steps to properly pack up the ARES for shipment. Packing Materials Provided: Standard LS Shipping carton Shipping carton Shelf for
More informationWaste/recycle sets. Waste/recycle sets Premium TANDEM and TANDEMBOX solutions for waste/recycle cabinets. blum.com
Waste/recycle sets Waste/recycle sets Premium TANDEM and TANDEMBOX solutions for waste/recycle cabinets blum.com Waste/recycle solutions for every kitchen Blum s new TANDEM and TANDEMBOX waste/recycle
More informationINSTALLATION MANUAL FOR KINESIS STATIONS STEP MH67E EQUIPMENT REQUIRED FOR INSTALLATION
1 02/02/2012 INSTALLATION MANUAL FOR KINESIS STATIONS STEP MH67E EQUIPMENT REQUIRED FOR INSTALLATION Phillips screwdriver T wrenches size 5-6-8-10 Combination ratcheting wrench 17 and/or open-end wrench
More informationOptical Cable Entry Facility (OCEF) Installation Instructions
Instruction Sheet 860380690 Uniprise Solutions Optical Cable Entry Facility (OCEF) Installation Instructions General The Optical Cable Entry Facility (OCEF) cabinets store optical fiber splices between
More informationInstallation and Maintenance Manual IM 770-1
Installation and Maintenance Manual IM 770-1 Group: Applied Air Systems Part Number: IM 770 Date: March 2014 Skyline Outdoor Air Handler Roof Curb Table of Contents General Description... 3 Curb-Ready
More informationADJUSTABLE MOUNTING POST
C Part Number 069 B EACH CARTON CONTAINS D Floor Mounting Kit A. Bottom Post Assembly B. Top Post Assembly C. Flange Head Bolts (x2) D. Floor Mounting Kit. 5/8 Wx/6 Hx0 L framing channels (x2) 2. /8-6x4
More informationRMR Modular Enclosure
RMR Modular Enclosure RMR Modular Enclosure User Manual techsupport@chatsworth.com www.chatsworth.com 2016 Chatsworth Products, Inc. All rights reserved. Chatsworth Products, CPI, CPI Passive Cooling,
More informationSAM. Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual. Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" Page 20
SAM Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" 20 Step 6 LCD Mobile Lift Stand Model: STV-C65 Cable management
More informationTheDrawerDepot.com DYNAPRO DYNAPRO SLIDE SYSTEM. The new generation of concealed undermount slides. Elegant, comfortable, and precision engineered.
TheDepot.com DYNAPRO DYNAPRO SLIDE SYSTEM The new generation of concealed undermount slides. Elegant, comfortable, and precision engineered. TheDepot.com TheDepot.com To create a product innovation is
More informationThanks for shopping with Improvements! Louvered Pedestal Sink Cabinet Item #512042
Thanks for shopping with Improvements! Louvered Pedestal Sink Cabinet Item #512042 Note: Read these instructions carefully before assembling. Tools required: Philips screwdriver (not included). Find a
More informationETC Installation Guide
ETC Installation Guide Unison Using this Guide This document is intended to guide you through the installation of the DRd Semi-Recessed installation kit. Reference the Unison DRd Rack Enclosure Installation
More informationDisplay-Top Apothecary Cabinet. Assembly Instructions. Page 1
Display-Top Apothecary Cabinet Assembly Instructions Page 1 Display-Top Apothecary Cabinet Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean,
More informationMounting a BalanceBox 400 to a brick wall
Unpack the BalanceBox 400 and remove the Wall frame cover and its bag of screws. Slide the cover out at the top. NOTE: the cover is NOT included with the BalanceBox 400H LOCK SCREW HOLE MOBILE STAND MOUNTING
More informationS214 / S215 ASSEMBLY INSTRUCTIONS. Assembly tools required : Hammer, Phillips # 2, #3 and regular screwdriver, 10 and 17mm wrenches
S14 / S15 ASSEMBLY INSTRUCTIONS Assembly tools required : Hammer, Phillips #, #3 and regular screwdriver, 10 and 17mm wrenches Special Notes : To make the assembly simple and well done, you have to be
More informationSetting Up the Polycom RealPresence Group Series Media Center
Setting Up the Polycom RealPresence Group Series Media Center Setting Up the Polycom RealPresence Group Series Media Center with a Single 55 or 65 Display or 55 Dual Displays Base Legs (4) M10 x 50 flanged
More informationY1160A EIA Rack Sliding Shelf Installation Note
Y1160A EIA Rack Sliding Shelf Installation Note Rack Mount Kit Contents Procedure This installation note contains procedures for mounting L4400 Series LXI instruments in EIA rack cabinets using the Y1160A
More informationParts List (Continued) 18 each: #8 x 0.625" Truss Head Phillips Screw 20 each: #8 x 1.75" Flat Head Phillips Screw 4 each: #8 x 1.25" Flat Head Philli
EVO Tall Pull-Out Wood Pantry Important Notes Always read the instructions completely and carefully before beginning assembly. Remove and check contents for damage and/or missing parts. Keep the original
More informationASSEMBLY INSTRUCTIONS for : Version 4
ASSEMBLY INSTRUCTIONS for : Version 4 Hardware Pack 80080 Hardware List Hardware Pack Cont' (a) (j) Qty 4 - Qty 32-1/2" x 2-1/4" Button Head Bolt 5/16" Nylock Nut (b) (k) Qty 4 - Qty 4-1/2" Nylock Jam
More informationShowpiece Cabinet Integrated Stand For 32" - 52" LCD HDTV
Showpiece Cabinet Integrated Stand For 32" - 52" LCD HDTV Installation and Assembly Instructions 2009 Incredible Technologies Inc. Version 0109 Showpiece Cabinet Integrated Stand for 32" - 52" LCD HDTV
More informationContainAire Dual Sliding Door Unit Pictogram User Installation Guide
ContainAire Dual Sliding Door Unit Pictogram User Installation Guide 2014 Tate Access Floors, Inc. 1 Introduction Thank you for choosing a Tate Airflow product. Tate Airflow products are engineered to
More informationMounting Brackets for 8450 Drawer Slides KV Front Bracket 20 $1.30 KV P Rear Bracket 20 $5.20
Mounts bottom or side 1/2 clearance plus 1/32 0 lb. load with model Almond finish Integrated soft-close mechanism 32mm hole pattern with direct access mounting Lever disconnect for easy drawer removal
More informationOpen shipping crate and separate all of the different parts. Over The Top Shelters LLC
ASSEMBLY INSTRUCTIONS FOR MODEL SH122110GN and SH122110GY Open shipping crate and separate all of the different parts. Count each part and match up with parts list. Shortages or damaged parts should be
More informationNorthcote Wardrobe with Toy Box Base & Shelf L2988
Thank you for shopping with GLTC, we hope you enjoy having this product in your home. www.gltc.co.uk Northcote Wardrobe with Toy Box Base & Shelf L2988 We know assembling furniture, toys or accessories
More informationLeveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
More informationFOLDING POCKET DOOR SYSTEM ALT-F Installation Manual
FOLDING POCKET DOOR SYSTEM ALT-F Installation Manual Thank you for selecting our product. Before starting installation, please read this manual thoroughly to ensure correct installation. Please keep this
More informationEXCERPT FROM THE Jobsite saw OWNERS MANUAL
Table and Fence Table and Fence Parts List 0 0 0 0 0 0 0 0 Table JSS-00 Fence Roller Pin (mm x mm) JSS-0 Rear Lock Down Screw for Insert JSS-00 0 mm O-Ring JSS-00 Extension Wing JSS-00 Fence Roller Wheel
More informationPROJECT PLAN OUTFEED TABLE
BUILD IT WITH ROCKLER PROJECT PLAN OUTFEED TABLE BUILD Stock # Item 00 ' Universal T-Track () 0 T-Track Intersection Kit 70 JIG IT Universal Drawer Slide Jig 0 " Drawer Slides () 77 Auto-Adjust Jig Clamp
More informationRack-Mount Angles and Accessories
Spec-00433 FPH FX (763) 422-2600 422-2211 Modular Enclosure Systems PROLINE Internal Components PROLINE Rack Angles Overview PROLINE Rack Angles are available in 19-, 23- and 24-in. configurations. All
More informationRHINO CART MOBILE FIXTURING STATION ALL-IN-ONE METRIC CATALOG CHARGE RIGHT THROUGH YOUR MOST CHALLENGING PROJECTS!
RINO CART MOBILE FIXTURING STATION Table + Fixture Kit ALL-IN-ONE M obility & Storage METRIC CATALOG CARGE RIGT TROUG YOUR MOST CALLENGING PROJECTS! Strong and Tools Strong and Tools MOBILE FIXTURING STATION
More information