FREE KENNEDY FOR MORE INFO VISIT JETTOOLS.COM JET 10" HORIZONTAL AUTO SAW JET JLH SERIES LEVER HOIST STARTING AT $ SEE PAGE 30 SEE PAGE 5

Transcription

1 S A V I N G S E V E N T JET 10" HORIZONTAL AUTO SAW STARTING AT $20, SEE PAGE 5 JET JLH SERIES LEVER HOIST STARTING AT $ SEE PAGE 30 KENNEDY ROLLER CABINET SEE INSIDE PAGE FOR DETAILS FOR MORE INFO VISIT JETTOOLS.COM PRICES EFFECTIVE: September 1 - December 31, 2010

2 S A V I N G S E V E N T Jet partners with Kennedy Manufacturing Receive a White 4 Drawer roller storage cabinet with the purchase of select promo products. See Flyer for details. CONTENTS: Sawing Turning Milling Drilling Finishing Forming Overhead Lifting Warehouse & Dock Hydraulic Shop Air Tools SPECIAL BONUS OFFER Free 5 Gallon Pail of coolant from Rustlick with purchase of a select* JET bandsaw, mill or lathe. For your 5 gallon pail of Rustlick cutting fluid please fill out the online form at Requests can also be submitted by ing the required information to egibbons@rocolnorthamerica. com or by completing the form on the back at faxing it to Please make sure to include all information, incomplete requests will not be honored. *See JET flyer for qualified machines. Bandsaws: PowerSaw Synthetic fluid for sawing Mills & Lathes: PowerCool Water-soluble oil for machining

3 Save $26! JET 5" x 6" HORIZONTAL/VERTICAL BANDSAW UL listed single phase motor Exclusive design heavy-duty 14-gauge stand Large diameter wheels and built-in handle allows easy movement Front legs feature adjustable leveling pads STOCK NO $ Save $167! JET 5" x 8" HORIZONTAL METAL CUTTING BANDSAWS Adjustable hydraulic feed system Adjustable ball bearing guides Heat treated steel worm gear and bronze drive gear STOCK NO $ Save $ ! JET 7" x 12" HORIZONTAL BANDSAWS Blade Guides: Side: Eccentric shaft, ball bearing Rear: Ball bearings Blade drive is steel, heat treated worm, driving a bronze worm gear in oil bath Heavy-duty cast iron saw head and table Oil bath hardened and ground worm gear Rapid acting vise STOCK NO $1, Save $173! JET 7" x 12" HORIZONTAL/VERTICAL BANDSAW W/COOLANT SYSTEM UL listed motor Heavy cast iron bow and bed Hydraulic downfeed for ease of cut Hardened and ground worm gear Roller cabinet with built-in chip tray Automatic shut-off after cut STOCK NO $1, Stock Number HVBS-56M Round at 90 (in.) 5 Round at 45 (in.) 3 Rectangle at 90 (in.) 5 x 6 Rectangle at 45 (in.) 5 x 3 Vertical Worktable (in.) 9-5/8 x 9-1/2 Vise Swivels (deg.) 45 Blade Size (in.) 1/2 x x 64-1/2 Blade Wheel Diameter (in.) 7-3/8 Blade Speeds (FPM) 80, 120, 200 1/2HP, 1Ph, 115/230V, Prewired 115V Net Weight (lbs.) 115 List Price $ Sale Price $ Stock Numbers Number J-3230K Round at 90 (in.) 5 Round at 45 (in.) 4 Rectangle at 90 (in.) 5 x 7-1/2 Rectangle at 45 (in.) 4-1/2 x 5 Blade Size (in.) 1/2 x.025 x 68-1/2 Blade Speeds (SFPM) Blade Wheel Diameter (in.) 7-1/2 Bed Height (in.) 23-/12 1/2HP, 115V, 1Ph, 1725 RPM Floor Space Required (in./l x W x H) 37 x 16 x 37 Net Weight (lbs.) 165 List Price $ Sale Price $ Stock Numbers Number J-3410 J Round at 90 (in.) 7 7 Round at 45 (in.) 6 6 Rectangle at 90 (in.) 7 x 10 7 x 10 Rectangle at 45 (in.) 6 x 7 6 x 7 Blade Size (in.) 3/4 x.035 x 93 3/4 x.035 x 93 Blade Speeds (SFPM) Blade Wheel Diameter (in.) 11-7/ /16 Bed Height (in.) 23-1/2 23-1/2 3/4HP, 115V, 1Ph, 1725 RPM 3/4HP, 220V, 1Ph, 1725 RPM Floor Space Required (in./l x W x H) 50 x 18 x x 18 x 41 Net Weight (lbs.) List Price $1, $1, Sale Price $1, $1, Stock Number HVBS-7MW Cutting Capacity: Round at 90 (in.) 7 Round at 45 (in.) 4-1/2 Rectangle at 90 (in.) 7 x 11 Rectangle at 45 (in.) 5 x 4-1/2 Throat Depth (in.) 7 Vertical Worktable (in.) 9-3/8 x 10 Vise Swivels 45 Blade Size (in.) 3/4 x.035 x 93 Blade Speeds (SFPM) 80, 130, 180, 285 Blade Wheel Diameter (in.) 11-3/4 Bed Height (in.) 23 3/4HP, 115/230V, 1Ph, Prewired 115V Floor Space Required (in./l x W x H) 20-1/2 x 49-1/2 x 38 Net Weight (lbs.) 330 List Price $1, Sale Price $1, METALWORKING OVERHEAD LIFTING WAREHOUSE & DOCK HYDRAULIC & SHOP 3

4 PRICES EFFECTIVE: September 1 - December 31, SAWING INDUSTRIAL overhaul : : SAVINGS EVENT Save $581! JET 8" x 13" HORIZONTAL BANDSAW Heavy duty, rigid steel and cast iron construction Oil bath, gear reduction power train, along with precision blade guides and a hydraulic feed system Conveniently located control panel and an easily accessible coolant system Dual voltage electrics (115V/230V) with overload and low voltage protection STOCK NO $2, Save $50! JET 8" x 14" HORIZONTAL GEAR HEAD BANDSAW Heavy-duty geared head transmission for quick speed changes Easy accessible control panel for operator use Hydraulic feed Portable on wheels Hardened and ground worm gears Miters at 45 Quick action vise STOCK NO $1, Save $1076! JET 9 x 16 HORIZONTAL BANDSAW Large handwheel and built-in gauge for easy blade tensioning Coolant is distributed through the blade guides Blade guides feature parallel double row ball bearing support Blade brush is built-in and self-propelled STOCK NO $3, Save $1226! JET 10" x 16" HORIZONTAL BANDSAWS Variable speed drive system allows the operator to fine tune the blade speed fast and easily Exclusive 6 contact point blade guide assemblies STOCK NO $4, Stock Number J-7015 Cutting Capacity: Round Capacity at 90 (in.) 9 Round Capacity at 45 (in.) 9 Rectangle Capacity at 90 (in.) 9 x 13 Rectangle Capacity at 45 (in.) 9 x 8 Blade Size (in.) 1 x.035 x Blade Wheel Diameter (in.) 11-5/8 Blade Speed (SFPM) 82, 132, 170, 235 Bed Height (in.) 27-1/2 1.5HP, 115/230V, 1Ph, Prewired 115V Floor Space Required (in./ L x W x H) 62-1/2 x 23 x 48 Net Weight (lbs.) 551 List Price $3, Sale Price $2, Stock Number HBS-814GH Cutting Capacity: Round at 90º (in.) 8 Round at 45º (in.) 6-1/2 Rectangle at 90º (in.) 14 x 8 Rectangle at 45º (in.) 6-1/2 x 4-1/2 Vise Swivels 45 Blade Size (in.) 3/4 x.035 x 97 Blade Speeds (SFPM) 135, 197, 256 Blade Wheel Diameter (in.) 12 Bed Height (in.) 26 1HP, 115/230V, 1Ph, Prewired 115V Floor Space Required (in./l x W X H) 51-1/2 x 18-1/8 x 44 Net Weight (lbs.) 440 List Price $1, Sale Price $1, Stock Number HBS-916W Cutting Capacity: Round at 90 (in.) 9 Round at 45 (in.) 9 Rectangle at 90 (in.) 9 x 14 Rectangle at 45 (in.) 9 x 6-1/8 Vise Swivels 45 Blade Size (in.) 1 x.035 x 119-1/2 Blade Speeds (SFPM) 82, 132, 170, 235 Blade Wheel Diameter (in.) 13 Bed Height (in.) /2HP, 115/230V, 1Ph, Prewired 115V Floor Space Required (in./l x W x H) 65 x 28 x 42 Net Weight (lbs.) 706 List Price $4, Sale Price $3, Stock Number Number J-7020 J-7040 J (in.) (in.) 9 x 16 9 x 16 9 x 16 Blade Size (in.) 1 x.035 x x.035 x x.035 x 135 Blade Wheel Speeds (SFPM) Blade Wheels (in.) Height of Work Table (in.) 23-1/2 23-1/2 23-1/2 Coolant Tank (gal) /2HP, 115/230V, 1 Ph, prewired 230V 2HP, 220V, 3Ph 2HP, 440V, 3Ph Ship Weight (lbs.) List Price $5, $5, $5, Sale Price $4, $4, $4, GALLONS OF RUSTLICK POWERSAW & KENNEDY ROLLER CABINET $698 VALUE

5 Save $976! JET 10" x 14" HORIZONTAL SWIVEL HEAD BANDSAWS Unique design features a swivelhead for miter cutting structurals, pipe and tubing Miter head swivels from 90 to 45, while the stock remains in the same position Large, easy to read scale for positioning saw head STOCK NO $4, Save $1,240! JET 10" x 16" MITER BANDSAWS Variable speed drive system allows the operator to fine-tune the blade speed fast and easily Exclusive six contact point blade adjustable guide assemblies STOCK NO $5, Save $1300! JET 10" x 18" HORIZONTAL BANDSAW Large handwheel and built-in gauge for easy blade tensioning Coolant is distributed through the blade guides Blade guides feature parallel double row ball bearing support Blade brush is built-in and self-propelled Quick-positioning vise with fully adjustable jaws swivels to 45 STOCK NO $3, Save $1600! JET 12" x 20" SEMI-AUTOMATIC Horizontal Bandsaw Variable speed drive system allows the operator to fine-tune the blade speed fast and easily Exclusive swivel control panel Heavy-duty transmission utilizes hardened and ground gears operating in an oil bath STOCK NO $7, GALLONS OF RUSTLICK POWERSAW & KENNEDY ROLLER CABINET Stock Number MBS-1014W-1 MBS-1014W-3 Cutting Capacity: Round at 90 (in.) Round at 45 (in.) 9 9 Rectangle at 90 (in.) 10 x x 14 Rectangle at 45 (in.) 9 x 10 9 x 10 Vise Swivels Blade Size (in.) 1 x.035 x x.035 x 130 Blade Speeds (SFPM) 82, 132, 210, , 132, 210, 330 Blade Wheel Diameter (in.) Bed Height (in.) HP, 230V only, 1Ph 3HP, 230/460V, 3Ph, Prewired 230V Floor Space Required (in./l x W x H) 26 x 69 x x 69 x 44 Net Weight (lbs.) 1,067 1,067 List Price $5, $5, Sale Price $4, $4, GALLONS OF RUSTLICK POWERSAW & KENNEDY ROLLER CABINET Stock Number Number J-7020M J-7040M J-7040M-4 (in.) (in.) 9 x 16 9 x 16 9 x 16 Blade Size (in.) 1 x.035 x x.035 x x.035 x 135 Blade Wheel Speeds (SFPM) Coolant Tank (gal) /2HP, 115/230V, 1Ph 2HP, 220V, 3Ph 2HP, 440V, 3Ph Ship Weight (lbs.) List Price $6, $6, $6, Sale Price $5, $5, $5, GALLONS OF RUSTLICK POWERSAW & KENNEDY ROLLER CABINET $698 VALUE $698 VALUE Stock Number HBS-1018W Round at 90 (in.) 10 Round at 45 (in.) 10 Rectangle at 90 (in.) 10 x 15 Rectangle at 45 (in.) 10 x 7-1/4 Vise Swivels 45 Blade Size (in.) 1 x.035 x 130-1/2 Blade Speeds (SFPM) 82, 132, 210, 330 Blade Wheel Diameter (in.) 14 Bed Height (in.) 25 2HP, 230V only, 1Ph Floor Space Required (in./l x W x H) 70 x 31 x 44 Net Weight (lbs.) 801 List Price $4, Sale Price $3, $698 VALUE 5 GALLONS OF RUSTLICK POWERSAW & KENNEDY ROLLER CABINET $698 VALUE Stock Number Number J-7060 & 45 (in.) 12 (in.) 12 x 20 (in.) 12 x 12 Blade Size (in.) 1 x.035 x 156 Blade Wheel Speeds (SFPM) 82 to 262 Blade Wheels (in.) 17 3HP, 230/460V, 3Ph, Prewired 230V Ship Weight (lbs.) 1456 Floor Space Required (in./l x W x H) 87 x 31-1/2 x 53 List Price $9, Sale Price $7, METALWORKING OVERHEAD LIFTING WAREHOUSE & DOCK HYDRAULIC & SHOP 5

6 PRICES EFFECTIVE: September 1 - December 31, 2010 INDUSTRIAL overhaul : : SAVINGS EVENT Save $2,000! JET 10" HORIZONTAL auto saw FEATURES FCD50, a highly rigid material, is used to cast a majority of.the machine structure. It is combined with an advanced torque enhanced transmission and give 30% more productivity in sawing steel and stainless steel Blade breakage detector 10 PLC-controlled programs 3300lbs load capacity Material detecting sensor Bundle cutting Saw Frame-work height selector Broken blade sensor Automatic chip-cleaning system Dual-vise shuttle feeding system Heavy-duty one-piece base assembly Heavy duty taper bearing in blade wheels Power driven blade brush Hydraulic blade tensioning system Large ball-bearing supporting the blade guides Material-size sensor for rapid travel Inverter blade speed control Vise pressure regulator STANDARD EQUIPMENT 2 Meter (6.5FT) Roller Stand Numerical Control Feed and Speed System PLC Memorize Programable Cutting (10 programs) Chip Cart Auger-Type Hydraulic/Automatic Chip Conveyor Hydraulic Vertical Press Clamping (Nesting Fixture) Blade Breakage Detector Work Lamp Inverter Blade Speed Control Dual Vise Shuttle System Saw Frame Work Height Selector Out of Stock Sensor Hydraulic Blade Tension Full Stroke Vises Vise Pressure Regulator Bundle Clamps Power Driven Blade Cleaning Brush STOCK NO $20, STOCK NUMBER Number AB-1012W CUTTING CAPACITIES Round Diameter (in.) 10 Rectangle (W x H) 10 x 12 Bundle Width (in.) 6-10 Bundle Height (in.) 4-6 Minimum Residual Work Length (in.) 2 Maximum Feeding Stroke (in.) 15-3/4 Minimum Stock Diameter (in.) 3/8 No Material Detecting Diameter (in.) 1-1/4 PLC-NC Programable Cutting Quantities 10 programs Work Load Capacity (lbs.) 3,306 Blade Size (in.) 1 x x 138 Blade Speed (ft/min) Blade Speed (m/min) Main 3HP, 230V, 3Ph Coolant 1/6HP Hydraulic 1HP Coolant Tank Capacity (gal.) 10.5 Hydraulic Tank Capacity (gal.) 8 Roller Stand Load Capacity (lbs.) 2,200 Table Height (in.) 30 Packaging Size (in./ L x W x H) 90 x 87 x 75 Net Weight (lbs.) 3,153 List Price $22, Sale Price $20, SAWING $125 VALUE 5 GALLONS OF RUSTLICK POWERSAW

7 Save $1026! JET 13" x 21" SEMI-AUTOMATIC HORIZONTAL BANDSAW Semi-automatic bow raises after cut is complete to predetermined height Fully adjustable hydraulic downfeed controls the rate of descent STOCK NO $8, Save $10.99! Horizontal Material Support Stand Heavy-duty cast iron and steel construction.chrome plated ball bearing roller head Locking screws provide added safety The roller heads are interchangeable STOCK NO $ STOCK NUMBER Weight Holding Capacity (lbs.) 2,000 2,000 Maximum Stock Diameter (in.) - 1 Maximum Stock Diameter (in.) - 12 Length of Horizontal Roller (in.) 14 - Height Range (in.) Base/3 Legs Area Required (in.) 16.5 x 16.5 Square 16.5 x 16.5 Square Stand Dimensions (in./ L x W x H) 22 x 22 x 5 22 x 22 x 5 Net Weight (lbs.) List Price $ $ Sale Price $ $ Save $393! JET 14" WOOD/METAL VERTICAL BANDSAWS Cast iron frame Solid, one-piece steel base for extra stability Conveniently located on/off switch Variable speed drive system (J-8201VS & J-8203VS) Exclusive gear box design allows wood/metal model saws to be used for a wider variety of metal, wood, non-ferrous metal and plastic cutting applications STOCK NO K...$ Horizontal V-Roller Stock Numbers K K Number J-8210K J-8203K J-8201VS J-8203VS Under Guide (in.) Under Guide with Riser Block (in.) Throat Depth (in.) 13-1/2 13-1/2 13-1/2 13-1/2 Blade Size (in.) 3/8 x.025 x 92-1/2 3/8 x.025 x 92-1/2 3/8 x.025 x 92-1/2 3/8 x.025 x 92-1/2 Cutting Speeds Wood (SFPM) Cutting Speeds Metal (SFPM) 39, 57, 78, 107, 142, 196, , 57, 78, 107, 142, 196, , Variable Speed , Variable Speed Table Tilt to Right Table Tilt to Left Table Height at 90 (in.) Table Size (in.) 14 x x x x 14 Miter Gauge Groove Wide x Deep (in.) 3/4 x 3/8 3/4 x 3/8 3/4 x 3/8 3/4 x 3/8 1HP,115V,1Ph, 1725 RPM 1HP,230/460V, 3Ph, 1725 RPM, Prewired 230V 5 GALLONS OF RUSTLICK POWERCOOL & KENNEDY ROLLER CABINET 1HP,115V, 1Ph, 1725 RPM $698 VALUE 1HP,230/460V, 3Ph, 1725 RPM, Prewired 230V Floor Space Required (in./l x W x H) 20 x 16 x x 16 x x 16 x x 16 x 68 Net Weight (lbs.) List Price $1, $1, $1, $1, Sale Price $ $ $1, $1, Stock Number HBS-1321W Round at 90 (in.) 13 Round at 45 (in.) 10 Rectangle at 90 (in.) 13 x 18 Rectangle at 45 (in.) 10 x 11-1/2 Blade Size (in.) 1-1/4 x.042 x 161-1/2 Blade Speeds (SFPM) 66 to 264 Blade Wheel Diameter (in.) 18 Bed Height (in.) 32 3HP, 230/460V, 3Ph, Prewired 230V Coolant 1/6HP Floor Space Required (in./l x W x H) 84 x 32-1/2 x 55 Net Weight (lbs.) 1,276 List Price $9, Sale Price $8, Save $300! JET 7" and 8-3/4" ZIP MITER HORIZONTAL BANDSAW Adjustable hydraulic feed system Eccentric shaft ball bearings Heavy duty cast iron saw head and base Mitering capability to 60 Convenient control panel STOCK NO $1, STOCK NUMBER Number J J-9225 CUTTING CAPACITIES Round Capacity at 90 (in.) 7 8-3/4 Round Capacity at 45 (in.) 4-1/2 6-1/4 Rectangle Capacity at 90 (in.) 7 x 7 8-3/4 x 7 Rectangle Capacity at 45 (in.) 4-1/2 x 4-1/2 6-1/4 x 7-1/4 Vise Swivels (deg.) Blade Size (in.) 3/4 x.035 x 82 1 x.035 x 96-1/2 Blade Wheel Diameter (in.) 10-1/2 11-5/8 Bed Height (in.) 35-7/8 38-7/16 1HP, 230V, 3Ph 1-1/2HP, 230V, 3Ph Floor Space Required (in./ L x W x H) 47 x 29 x 56-1/2 51 x 33 x 59-1/4 Net Weight (lbs.) List Price $2, $3, Sale Price $1, $2, Save $186! JET 18" METAL/WOOD VERTICAL BANDSAW Exclusive quick-release, precision T-square style rip fence Built-in cutting height scale Extra large 19 x 19 cast iron table Convenient speed changes with no tools required Ball bearing guide system reduces friction for longer blade life Lower blade wheel brush and dust collection port STOCK NO $2, Stock Number VBS-18MW Cutting Capacity: Height (max./in) 12 Throat Depth (max./in) 18-3/8 Rip left of blade w/fence (max./in) 16-1/2 Blade Size (in.) 137 x 3/4 x.035 Blade Length (approx./in.) 137 Blade Width (min-max./in.) 1/8-1-1/2 (Wood) Cutting Speeds Wood (SFPM) 1000, 1800, 3200 Cutting Speeds Metal (SFPM) 80, 150, 265 Table Size (in.) 19 x 19 Table Tilt R-45, L 10 Table Height at 90 (in.) 37-1/2 1 HP, 115/230V, 1Ph, Prewired 115V Net Weight (lbs) 440 List Price $2, Sale Price $2, $125 VALUE 5 GALLONS OF RUSTLICK POWERCOOL METALWORKING OVERHEAD LIFTING WAREHOUSE & DOCK HYDRAULIC & SHOP 7

8 PRICES EFFECTIVE: September 1 - December 31, 2010 INDUSTRIAL overhaul : : SAVINGS EVENT Save $1,326! JET 14", 16", 20" AND 36" VERTICAL BANDSAWS Specially designed for shop or production use, including the cutting of ferrous type materials Heavy-duty, completely enclosed steel frame Blade welder, cutter and grinder are included STOCK NO $3, KENNEDY ROLLER CABINET $599 VALUE Save $150! JET J-F225 FERROUS COLDSAW Self-centering vise has dual jaws for burr-free cuts Sturdy oil bath gear box design Magnetic starter with overload protection Cutting head swivels up to 45 for miter cuts STOCK NO $ Stock Number J-F225 1HP, 115V, 1Ph Blade Speed (RPM) 52 Blade Size (mm.) / /4 Floor Space Required (in./l x W x H) 30 x 17 x 32 List Price $1, Sale Price $ Save $504! JET NON-FERROUS HIGH SPEED MANUAL COLD SAWS Mitering capabilities- stops at 90, 45 left and 45 right Double self-centering vise for burr-free cuts Two cutting speeds Includes one high speed NF 350mm blade (579052) STOCK NO K...$4, Stock Numbers VBS-1408 VBS-1610 VBS-2012 VBS-3612 Height (in.) Throat Depth (in.) / Blade Speeds (SFPM) Low Low 82 to 330; High 985 to 3950 Low , High 390 3,280 Low , High Table Size (in.) 20 x x x 22-1/2 23-5/8 x 27-1/2, 17-3/4 x 27-1/2 Table Tilt 8 F & B, 12 L & 15 R 8 F & B, 12 L & 15 R 8 F & B, 15 R & 12 L 10 L, 45 R Table Height at /2 40 Welder (KVA) / HP, 115/230V, 1Ph, Prewired 115V 2HP, 230/460V, 3Ph, Prewired 230V 2HP, 230/460V, 3Ph, Prewired 230V 3HP, 230/460V, 3Ph, Prewired 230V Floor Space Required (in./l x W x H) 34 x 24 x 68-1/2 37 x 28 x 72-1/2 42 x 29 x x 33 x 78 Net Weight (lbs.) ,244 1,760 List Price $4, $6, $9, $10, Sale Price $3, $4, $6, $8, Save $196! JET MANUAL FERROUS COLDSAW Heavy duty cast iron frame base standard Cast dual pivot saw head Two cutting speeds Hardened and ground worm and wheel gear box Blade included STOCK NO $1, Save $554! JET FERROUS MANUAL COLD SAWS Sturdy gear box design Manually cuts from 45 left to 45 right Miter stops at 90, 45,and 45 right Double self-centering vise for burr-free cuts Two cutting speeds Includes one 350mm blade (579039) STOCK NO K...$4, Stock Number Number CS-275 CS-315 Cutting Capacity Solid (in.): Cutting Capacity Tubing (in.): Round at 90 Degrees (in.): Round at 45 Degrees (in.): Rectangle at 90 Degrees (in.): 3.1 x x 3.2 Square at 90 Degrees (in.): 2.5 x x 3.2 Blade Size (in.): Blade Speeds (RPM): 54, , 104 Maximum Vise Opening (in.): : 1.5HP, 220V, 3Ph 2HP, 220V, 3Ph Rectangle at 45 Degrees (in.): 2.2 x x 3.2 Square at 45 Degrees (in.): 2.2 x x 2.6 Ship Weight (lbs.) List Price $1, $2, Sale Price $1, $1, SAWING sawing Stock Number K K Number CK350-2K CK350-4K Cutting Capacity for Tubing: Round at 90 (in.) 4-1/2 4-1/2 Round at 45 (in.) 3-1/2 3-1/2 Square at 90 (in.) 4-1/4 x 4-1/4 4-1/4 x 4-1/4 Square at 45 (in.) 3-1/2 x 3-1/2 3-1/2 x 3-1/2 Rectangle at 90 (in.) 5-1/2 x 3-3/4 5-1/2 x 3-3/4 Rectangle at 45 (in.) 3-1/2 x 3-1/2 3-1/2 x 3-1/2 Round at 90 (in.) 3 3 Round at 45 (in.) 2-1/2 2-1/2 Square at 90 (in.) 3 x 3 3 x 3 Square at 45 (in.) 2-1/2 x 2-1/2 2-1/2 x 2-1/2 Blade Size (mm) 350 x 32 x x 32 x 3.4 Blade Speeds (RPM) 1750, , 3500 Maximum Vise Opening (in.) 6 6 2HP, 230V, 3Ph 2HP, 460V, 3Ph Floor Space Required (in./l x W x H) 25 x 52 x x 52 x 73 Net Weight (lbs.) List Price $4, $4, Sale Price $4, $4, Stock Number K K Number FK350-2K FK350-4K Cutting Capacity for Tubing: Round at 90 (in.) 4-1/2 4-1/2 Round at 45 (in.) 3-1/2 3-1/2 Square at 90 (in.) 4-1/4 x 4-1/4 4-1/4 x 4-1/4 Square at 45 (in.) 3-1/2 x 3-1/2 3-1/2 x 3-1/2 Rectangle at 90 (in.) 5-1/2 x 3-3/4 5-1/2 x 3-3/4 Rectangle at 45 (in.) 3-1/2 x 3-1/2 3-1/2 x 3-1/2 Round at 90 (in.) 2 2 Round at 45 (in.) 1-3/4 1-3/4 Square at 90 (in.) 2 x 2 2 x 2 Square at 45 (in.) 1-3/4 x 1-3/4 1-3/4 x 1-3/4 Blade Size (mm) 350 x 32 x x 32 x 2.5 Blade Speeds (RPM) 44, 88 44, 88 Maximum Vise Opening (in.) 6 6 2HP, 230V, 3Ph 2HP, 460V, 3Ph Floor Space Required (in./l x W x H) 50 x 28 x x 28 x 60 Net Weight (lbs.) List Price $4, $4, Sale Price $4, $4,395.00

9 Save $24! JET 9" x 20" BELT DRIVE BENCH LATHE PACKAGE Spindle supported by precision tapered roller bearings Hardened and ground bedways Power longitudinal feed allows threading Standard 1-1/2 x 8 TPI spindle mount allows for many aftermarket accessories Reversing switch included for added versatility STOCK NO $1, Shown with Optional Stand INCLUDES: 3-Jaw & 4-Jaw Chucks, Face Plate, 4-Way Tool Post, Single Tool Post & Steady & Follow Rest BD-920W Swing Over Bed (in.) 8-3/4 Swing Over Cross Slide (in.) 5-1/4 Distance Between Centers (in.) 20 Spindle Bore (in.) 25/32 Spindle Mount (in. x TPI) 1-1/2 x 8 Spindle Taper with Sleeve MT-3 Spindle Speeds 6 Spindle Speed Range (RPM) 130-2,000 Longitudinal Feeds/Cross Feed Rates 27 Longitudinal Feed Range (IPR) Number Inch Threads 27 Inch Thread Range (TPI) /4HP, 1Ph, 115V only Net Weight (lbs.) 285 Stock Number BD-920W Lathe Package List Price Sale Price BD-920W 9" Swing 20" Centers, 3/4HP, 1Ph, 115V Only $1, $1, K BD-920W, Lathe with S-920N Stand $1, $1, S-920N, Cabinet Stand $ $ Save $400! JET 13 x 40 BELT DRIVE BENCH LATHE PACKAGES One of the most popular JET lathes now comes with an enclosed gearbox as a standard feature Enclosed gearbox design provides smooth, quiet operation Fast, easy speed changes Low voltage motor controls Helical cut headstock gears reduce noise Change gears allow metric threading Spindle is supported by precision tapered roller bearings V-way bed is induction hardened and ground Gap bed section provided for large diameter work Independent leadscrew and feed rod T-slotted compound slide with four-way tool post Carriage mounted spindle control lever Automatic feeding and threading are fully interlocked Feed selectors travel in grooved ways STOCK NO A...$3, Shown with Optional Stand AK INCLUDES: 3-Jaw & 4-Jaw Chucks, Steady Rest, Follow Rest, 4-Way Tool Post and Face Plate BDB-1340A Swing over Bed (in.) 13 Swing over Cross Slide (in.) 7-25/32 Swing over Gap (in.) 18-3/4 Length of Gap (in.) 8 Distance between Centers (in.) 40 Spindle Bore (in.) 1-3/8 Spindle Mount D1-4 Spindle Taper (with sleeve) MT-5 (MT-3) Number of Spindle Speeds 12 Range of Spindle Speeds (RPM) 60-1,240 2HP, 230V, 1Ph Net Weight (lbs.) 1055 Stock Number BDB-1340A Lathe Package List Price Sale Price A BDB-1340A, Belt, 13" Swing 40" Centers, 2HP, 1Ph, 230V Only $3, $3, AK BDB-1340A, Lathe with CBS-1340A Stand $4, $3, BDB-1340A, Lathe with Taper Attachment Installed $5, $4, AK CBS-1340 Cabinet Stand for A & A $ $ METALWORKING OVERHEAD LIFTING WAREHOUSE & DOCK HYDRAULIC & SHOP 18pc Premium 5C Collet Set $200 VALUE 9

10 TURNING PRICES EFFECTIVE: September 1 - December 31, 2010 INDUSTRIAL overhaul : : SAVINGS EVENT Shown with AK Cabinet Stand. A $525 VALUE! INCLUDES: 3-Jaw & 4-Jaw Chucks, Steady Rest, Follow Rest, 4-Way Tool Post, Face Plate and Splash Guard Save $385! JET 13 x 40 AND 14 x 40 GEARED HEAD BENCH LATHE One of the most popular JET lathes now comes with an enclosed gearbox as a standard feature Enclosed gearbox design provides smooth, quiet operation Fast, easy speed changes Hardened and ground gears are featured in the headstock and gearbox D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings Headstock is constantly oiled during operation Gear box gives wide inch threading and feed capabilities with no gear changes V-way bed design is induction hardened and ground Tolerance test certificate included STOCK NO K...$4, Up To a $525 Value! JET BENCH LATHE CABINET STAND AK-Cabinet Stand for 13" & 14" Bench lathes Sturdy steel metal stand with chip pan 2 side doors for storing supplies GHB-1340A GHB-1440A Swing Over Bed (in.) Swing Over Cross Slide (in.) 7-25/32 8 Swing Through Gap (in.) 18-3/4 19 Length of Gap (in.) 8 8 Distance Between Centers (in.) Spindle Bore (in.) 1-3/8 1-3/8 Spindle Mount D1-4 D1-4 Spindle Taper (With Sleeve) MT-5 (MT-3) MT-5 (MT-3) 2HP, 230V, 1Ph 2HP, 230V, 1Ph, Prewired 230V Net Weight (lbs.) 1,215 1,200 Stock Number GHB-1340A Lathe Packages List Price Sale Price GHB-1340A Lathe with Collet Closer & Taper Attachment $6, $6, GHB-1340A Lathe with ACU-RITE VUE DRO $6, $5, AK GHB-1340A Lathe with CBS-1340A Stand $5, $4, GHB-1340A, Bench Lathe with Collet Closer $5, $5, AK GHB-1340A Lathe with ACU-RITE VUE DRO & STAND $6, $6, GHB-1340A Lathe with Taper Attachment Installed $5, $5, Stock Number GHB-1440A Lathe Packages List Price Sale Price K GHB-1440A Bench Lathe with Stand $5, $4, GHB-1440A with ACU-RITE VUE DRO $6, $5, GHB-1440A Bench Lathe with Taper Attachment $5, $4, GHB-1440A Bench Lathe with Collet Closer & Taper Attachment $6, $5, GHB-1440A Lathe W/ ACU-RITE VUE DRO & Collet Closer $8, $6,

11 Buy a JET W Series Lathe and get a 18pc Save $1,169! JET 13" x 40" AND 14" x 40" GEARED HEAD ENGINE LATHE Uniquely designed exclusively by JET Hardened and ground gears are featured in the headstock and gearbox D1-4 spindle is precision ground for accuracy and supported by high-quality tapered roller bearings Headstock is constantly oiled during operation Splined, not keyed, shafts are utilized in the headstock Gearbox gives large threading and feed capabilities with no gear changes V-way bed design is induction hardened and ground STOCK NO $7, Stock Number GH-1340W-1 GH-1340W-3 GH-1440W-1 GH-1440W-3 Swing Over Bed (in.) Swing Over Cross Slide (in.) 7-1/2 7-1/2 8-1/2 8-1/2 Swing Through Gap (in.) Distance Between Centers (in.) Spindle Bore (in.) 1-1/2 1-1/2 1-1/2 1-1/2 Spindle Mount D1-4 D1-4 D1-4 D1-4 Spindle Taper (With Sleeve) MT-5 (MT-3) MT-5 (MT-3) MT-5 (MT-3) MT-5 (MT-3) Number of Spindle Speeds Range of Spindle Speeds (RPM) 40 1, , , ,800 Number of Longitudinal and Cross Feedsw Range of Longitudinal Feeds (in./rev.) Range of Crossfeeds (in./rev.) Number of Inch Threads Range of Inch Threads (TPI) Number of Metric Threads Range of Metric Threads (mm) Maximum Tool Size (in.) 5/8 x 5/8 5/8 x 5/8 5/8 x 5/8 5/8 x 5/8 Maximum Compound Slide Travel (in.) 3-1/2 3-1/2 3-1/2 3-1/2 Maximum Cross Slide Travel (in.) 6-3/8 6-3/8 6-3/8 6-3/8 Maximum Carriage Travel (in.) 37-1/2 37-1/2 37-1/2 37-1/2 Tailstock Spindle Travel (in.) 4-3/4 4-3/4 4-3/4 4-3/4 Taper in Tailstock Spindle MT-3 MT-3 MT-3 MT-3 Steady Rest Capacity (in.) 3-3/4 3-3/4 3-3/4 3-3/4 Follow Rest Capacity (in.) 2-3/4 2-3/4 2-3/4 2-3/4 Width of Bed (in.) 10-1/2 10-1/2 10-1/2 10-1/2 3HP, 230V, 1Ph, Prewired 230V 3HP, 230 /460V, 3Ph, Prewired 230V 3HP, 230V, 1Ph 3HP, 230V/460V, 3Ph, Prewired 230V Floor Space Required (in./l x W x H) 73-3/4 x 29-1/2 x 46-3/4 73-3/4 x 29-1/2 x 46-3/4 73-3/4 x 29-1/2 x 47-1/2 73-3/4 x 29-1/2 x 47-1/2 Net Weight (lbs.) List Price $8, $8, $9, $9, Sale Price $7, $7, $7, $7, JET GH1340W-1 GEARED HEAD ENGINE LATHE DRO & ACCESSORY PACKAGES List Price Sale Price GH-1340W-1 Lathe with Collet Closer $9, $8, GH-1340W-1 Lathe with 200S DRO & Collet Closer $12, $10, GH-1340W-1 Lathe with Taper Attachment Installed $10, $8, GH-1340W-1 with ACU-RITE 200S DRO Installed $11, $9, GH-1340W-1 with ACU-RITE 200S DRO, Taper Attachment and Collet Closer Installed $14, $11, GH-1340W-1 with ACU-RITE 200S & Taper Attachment $11, $10, GH-1340W-1 with NEWALL DP700 DRO Installed $11, $9, GH-1340W-1 with D9700 DRO and Collet Closer $12, $10, GH-1340W-1 with DP700 DRO & Taper Attachment $12, $10, JET GH1340W-3 GEARED HEAD ENGINE LATHE DRO & ACCESSORY PACKAGES List Price Sale Price GH-1340W-3 Lathe with Taper Attachment Installed $9, $8, GH-1340W-3 with TAPER ATTACH & COLLET CLSR $10, $9, GH-1340W-3 Lathe with ACU-RITE 200S DRO Installed $11, $9, GH-1340W-3 Lathe with ACU-RITE 200S DRO, Taper Attachment and Collet Closer Installed $14, $11, GH-1340W-3 Lathe with NEWALL DP700 DRO Installed $11, $9, GH-1340W-3 Lathe with Collet Closer Installed $10, $8, GH-1340W-3 Lathe with NEWALL DP700 DRO and Taper Attachment $12, $10, GH-1340W-3 Lathe with ACU-RITE 200S DRO and Collet Closer $12, $10, GH-1340W-3 Lathe with ACU-RITE 200S DRO and Taper Attachment $12, $10, GH DP700 DRO & Collet Closer 5-C Collet Set(650015)! A $ Value! INCLUDES: 3-Jaw & 4-Jaw Chucks, Face Plate, 4-way Tool Rest, Follow Rest, Steady Rest, Full Length Splash Guard, Work Lamp, Foot Brake and Micro Carriage Stop Newall DP700 $12, $10, Acu-Rite 200S 18 pc Premium 5C collet set 1/16" to 1-1/8" by 16th with Metal Rack JET GH1440W -1 GEARED HEAD ENGINE LATHE DRO & ACCESSORY PACKAGES List Price Sale Price GH-1440W-1, Lathe with Taper Attachment Installed $10, $8, GH-1440W-1 Lathe with Collet Closer Installed $10, $8, GH-1440W-1 Lathe with ACU-RITE 200S DRO and Collet Closer Installed $13, $9, GH-1440W-1 with Taper Attachment & Collet Closer $11, $9, GH-1440W-1 Lathe with ACU-RITE 200S DRO Installed $11, $9, GH-1440W-1 Lathe with ACU-RITE 200S DRO and Taper Attachment Installed $13, $10, GH-1440W-1 Lathe with ACU-RITE 200S DRO, Collet Closer & Taper Attachment Installed $14, $11, GH-1440W-1 Lathe with NEWALL DP700 DRO $11, $9, GH-1440W-1 Lathe with NEWALL DRO and Collet Closer $13, $10, JET GH1440W-3 GEARED HEAD ENGINE LATHE DRO & ACCESSORY PACKAGES List Price Sale Price GH-1440W-3 with COLLET CLOSER $10, $8, GH-1440W-3 Lathe with Taper Attachment Installed $10, $8, GH-1440W-3 Lathe with ACU-RITE 200S DRO Installed $11, $8, GH-1440W-3 Lathe with ACU-RITE 200S Taper Attachment $13, $9, GH-1440W-3 Lathe with NEWALL DP700 DRO Installed $11, $9, GH-1440W-3 Lathe with 200S, Taper Attachment and Collet Closer $15, $10, GH-1440W-3 Lathe with DP700 DRO and Taper Attachment $13, $10, GH-1440W-3 Lathe with DP700 DRO and Collet Closer $13, $10, GH-1440W-3 Lathe with ACU-RITE 200S DRO and Collet Closer $13, $10, METALWORKING OVERHEAD LIFTING WAREHOUSE & DOCK HYDRAULIC & SHOP 11

12 PRICES EFFECTIVE: September 1 - December 31, 2010 INDUSTRIAL overhaul : : SAVINGS EVENT 12 TURNING INCLUDES: 3-Jaw & 4-Jaw Chucks, Face Plate, 4-way Tool Rest, Follow Rest, Steady Rest, Full Length Splash Guard, Work Lamp, Foot Brake and Micro Carriage Stop Save $1,800! JET 14", 16", 18", AND 22" ZX SERIES LARGE SPINDLE BORE LATHES Uniquely designed exclusively by JET ISO 9001 certified manufacturer 3-1/8 bore spindle is supported by two tapered and one ball bearing Chrome molybdenum headstock gears are hardened, ground, and shaved Universal gearbox allows inch, metric, diametral, and module pitch threads, no change gears required Carriage features one-shot lubrication and TurciteB on bed sliding surfaces T-slotted compound slide featuring a four-way tool post One-piece cast iron base absorbs vibration allowing heavier cuts STOCK NO $12, Stock Number GH-1440ZX GH-1460ZX GH-1640ZX GH-1660ZX GH-1840ZX GH-1860ZX GH-1880ZX GH-2280ZX Swing Over Bed (in.) Swing Over Cross Slide (in.) 7-5/8 7-5/ Swing Through Gap (in.) 23-5/8 23-5/8 25-7/8 25-7/8 27-1/2 27-1/2 27-1/2 29-1/2 Length of Gap (in.) 12-1/4 12-1/4 12-1/4 12-1/4 12-1/4 12-1/4 12-1/4 12-1/4 Distance Between Centers (in.) Spindle Bore (in.) 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 3-1/8 Spindle Mount D1-8 D1-8 D1-8 D1-8 D1-8 D1-8 D1-8 D1-8 Spindle Taper (With sleeve) MT-7 (MT-5) MT-7 (MT-5) MT-7 (MT-5) MT-7 (MT-5) MT-7 (MT-5) MT-7 (MT-5) MT-7 (MT-5) MT-7 (MT-5) Number of Spindle Speeds Range of Spindle Speeds (RPM) 42 to 1, to 1, to 1, to 1, to 1, to 1, to 1, to 1, /2HP, 230/460V, 3Ph, Prewired 230V 7-1/2HP, 230/460V, 3Ph, Prewired 230V 7-1/2HP, 230/460V, 3Ph, Prewired 230V 7-1/2HP, 230/460V, 3Ph, Prewired 230V 7-1/2HP, 230/460V, 3Ph, Prewired 230V 7-1/2HP, 230/460V, 3Ph, Prewired 230V 7-1/2HP, 230/460V, 3Ph, Prewired 230V 10HP, 230/460V, 3Ph, Prewired 230V Net Weight (lbs.) 5,401 5,380 5,475 5,795 5,980 6,316 6,790 6,790 List Price $14, $15, $15, $16, $17, $18, $20, $22, Sale Price $12, $12, $13, $13, $14, $14, $15, $18, GH-1440ZX LATHE DRO AND ACCESSORY PACKAGES List Price Sale Price GH-1440ZX Lathe with Taper Attachment Installed $16, $13, GH-1440ZX Lathe with Acu-Rite 300S Dro $16, $14, GH-1440ZX Lathe with 300S Dro,Taper Attachment & Collet Closer $20, $16, GH-1440ZX Lathe with 300S Dro & Taper Attachment Installed $19, $15, GH-1440ZX Lathe with 300S Dro & Collet Closer $18, $15, GH-1440ZX Lathe with DP900 DRO & Taper Attachment $19, $15, GH-1440ZX Lathe with Newall DP900 DRO $16, $14, GH-1440ZX Lathe with DP900 & Collet Closer $18, $15, GH-1440ZX Lathe with DP900, Taper Attachment & Collet Closer $20, $16, GH-1460ZX LATHE DRO AND ACCESSORY PACKAGES List Price Sale Price GH-1460ZX Taper Attachment Lathe with Taper Attachment Installed $17, $13, GH-1460ZX Lathe with Acu-Rite 300S DRO $18, $14, GH-1460ZX Lathe with 300S DRO & Taper Attachment Installed $20, $15, GH-1460ZX Lathe with 300S DRO & Taper Attachment Installed $22, $16, GH-1640ZX LATHE DRO AND ACCESSORY PACKAGES List Price Sale Price GH-1640ZX Lathe with Collet Closer $17, $14, GH-1640ZX Taper Attachment Lathe with Taper Attachment Installed $18, $14, GH-1640ZX Lathe with DP900 DRO & Collet Closer $20, $16, GH-1640ZX Lathe with ACU-RITE 300S DRO $18, $15, GH-1640ZX Lathe with 300S DRO & Taper Attachment Installed $20, $16, GH-1640ZX Lathe with 300S Dro & Collet Closer $20, $16, GH-1640ZX Lathe with NEWALL DP900 DRO $18, $15, GH-1640ZX Lathe with DP900 & Taper Attachment Installed $19, $16, GH-1640ZX Lathe with DP900 Dro,Taper Attachment & Collet Closer $21, $17, GH-1660ZX LATHE DRO AND ACCESSORY PACKAGES List Price Sale Price GH-1660ZX Lathe with Collet Closer $16, $14, GH-1660ZX Lathe with Taper Attachment Installed $18, $14, GH-1660ZX Lathe with Taper Attachment & Collet Closer Installed $20, $15, GH-1660ZX Lathe with DP900, Taper Attachment & Collet Closer $22, $17, GH-1660ZX Lathe with ACU-RITE 300S DRO $19, $15, GH-1660ZX Lathe with 300S DRO & Taper Attachment Installed $21, $16, GH-1660ZX Lathe with 300S Dro & Collet Closer $21, $16, GH-1660ZX Lathe with 300S Dro,Taper Attachment & Collet Closer $22, $17, GH-1660ZX Lathe with NEWALL DP900 DRO $19, $15, GH-1660ZX Lathe with DP900 Dro & Collet Closer $21, $16, GH-1840ZX LATHE DRO AND ACCESSORY PACKAGES List Price Sale Price GH-1840ZX Lathe with Taper Attachment Installed $19, $15, GH-1840ZX Lathe with ACU-RITE 300S DRO $19, $16, GH-1840ZX Lathe with 300S & Collet Closer $21, $17, GH-1840ZX Lathe with 300S Dro,Taper Attachment & Collet Closer $23, $18, GH-1840ZX Lathe with 300S DRO & Taper Attachment Installed $21, $17, GH-1840ZX Lathe with Newall DP900 DRO $19, $16, GALLONS OF RUSTLICK POWERCOOL & KENNEDY ROLLER CABINET + ADD a DRO! $698 VALUE Add a Acu-Rite 300S or Newall DP S DRO Features: For Milling & Turning 5.7, 320x240 Resolution COLOR displays 2-, 3- or 4-axis milling & 2-, 3- and 4-axis turning and grinding Absolute/Incremental Reading Multi-lingual readout gear Newall DP900 Features: Rugged Die-Cast Chassis Feather-Touch, Cap-Sense Keypad 5.7" QVGA Blue STN with CCFL Backlight 2, 3, or 4 Axis with Optional Rotary Axis GH-1860ZX LATHE DRO AND ACCESSORY PACKAGES List Price Sale Price GH-1860ZX Lathe with Taper Attachment & Collet Closer $22, $16, GH-1860ZX Lathe with Taper Attachment Installed $20, $15, GH-1860ZX Lathe with ACU-RITE 300S DRO $21, $16, GH-1860ZX Lathe with 300S DRO & Taper Attachment Installed $23, $17, GH-1860ZX Lathe with 300S DRO & Collet Closer $23, $17, GH-1860ZX Lathe with 300S DRO, Taper Attachment & Collet Closer $25, $18, GH-1860ZX Lathe with Newall DP 900 DRO $21, $16, GH-1880ZX LATHE DRO AND ACCESSORY PACKAGES List Price Sale Price GH-1880ZX Lathe with Taper Attachment Installed $22, $16, GH-1880ZX Lathe with Acu-Rite 300S DRO $23, $17, GH-1880ZX Lathe with Newall DP900 DR0 $23, $17, GH-1880ZX Lathe with 300S DRO & Taper Attachment Installed $25, $18, GH-1880ZX Lathe with 300S & Collet Closer $25, $18, GH-1880ZX Lathe with 300S, Collet Closer & Taper Attachment $27, $19, GH-2280ZX LATHE DRO AND ACCESSORY PACKAGES List Price Sale Price GH-2280ZX, with Collet Closer $23, $19, GH-2280ZX, with Taper Attachment $24, $19, GH-2280ZX, with Taper Attachment & Collet Closer $25, $20, GH-2280ZX Lathe with ACU-RITE 300S DRO $26, $20, GH-2280ZX Lathe with 300S DRO Taper Attachment Installed $27, $21, GH-2280ZX Lathe with 300S DRO & Collet Closer $27, $21, GH-2280ZX Lathe with DP900 DRO & Taper Attachment Installed $26, $21, GH-2280ZX Lathe with 300S DRO, Taper Attachment & Collet Closer $29, $22,499.00

13 Save $1,500! JET CL-1640ZX-CNC LATHE W/ ANILAM 4200T CONTROL Anilam 4200T with 12.1" TFT Flat Screen CNC Control Dual electronic handwheels for manual control Hardened and precision ground bed ways High alloy gears hardened, ground and honed 3-Bearing spindle support Automatic homing Easy access chip removal 4 Station Programable Turret Automatic lubrication system Coolant system 10" 3-jaw chuck 16" Face plate Work light Tool box and tools Teach In Mode 255 Pairs of Tool Offsets Rigid Tapping is Standard Fully enclosed Cabinet CL-1640ZX-CNC Swing over Bed (in.): 16 Swing Through Gap (in.): 25-7/8 Distance Between Center s (in.): 40 Spindle Bore (in.): 3-1/8" Spindle Mount: D1-8 Spindle Taper W/ Sleeve: MT-7 Range of Spindle Speeds (RPM): Range of Longitudinal Feeds (IPR): 394in/min Range of Cross Feeds (IPR): 315in/min Max Tool Size (in.): 1 x 1 Cross Slide Travel (in.): 9 Carriage Travel (in.): 35 Tailstock Spindle Travel (in.): 5 Taper in Tailstock Spindle: MT-5 Steady Rest Capacity (in.): 3/8 to 7 Width of Bed (in.): 13-1/4 : 10HP, 230V, 3Ph STOCK NO $31, Stock Number Description List Price Sale Price GH-1640ZX-CNC LATHE W/ANILAM 4200T CNTRL $32, $31, MANUAL MODE: In manual mode, the lathe can be operated just as simply if it had been a conventional lathe. Up to two electronic handwheels can be connected to run the axes. In addition, the 4200T provides a wealth of data and many useful features, for example constant surface speed (CSS). SEMIAUTOMATIC MODE: The dual hand-wheel mode allows the machinist to cut in perfect arcs, tapers and chamfers. As only one hand-wheel is cranked, the 4200T will precisely control both axes to produce the desired shape. COME SEE US AT THE IMTS SHOW IN CHICAGO BOOTH S-9059 FOR A CHANCE TO WIN A CL-1640ZX-CNC LATHE! CL1640ZX-CNC Lathe sold through authorized distributors only. Please check jettools.com for a dealer in your area. CNC TRAINING 4 HOURS OF IN-HOUSE TRAINING FROM ACU-RITE AND ANILAM AUTOMATIC MODE: During automatic operation, the 4200T will control everything from start to finish. The machinist has several options on how to generate the program and some very powerful programming tools are available. METALWORKING OVERHEAD LIFTING WAREHOUSE & DOCK HYDRAULIC & SHOP 13

14 PRICES EFFECTIVE: September 1 - December 31, 2010 Save $60! JET 22-PIECE TOOLING KIT FOR 13" AND 14" W SERIES AND BENCH SERIES LATHES Kit Includes Three double ended boring bars Parting tool holder Adjustable turning tool holder Revolving knurling tool with three pairs of knurls Half dead center Carbide tipped dead center Heavy-duty live center Cut off tool Eight HSS tool bits Four hex key wrenches Works with 13 and 14 W Series and Bench Series Lathes STOCK NO $ parting tool holder live center HSS KNURLING TOOL HOLDER carbide dead center adjustable turning TOOL HOLDER half dead center hss tool bit boring bars Save $80! JET 23-PIECE TOOLING KIT FOR ZX LATHES Kit Includes Three double ended boring bars Parting tool holder Adjustable turning tool holder Revolving knurling tool with three pairs of knurls Half dead center Carbide tipped dead center Heavy-duty live center Cut off tool Eight HSS tool bits Four hex key wrenches Works with all ZX Series Lathes boring bars HSS KNURLING TOOL HOLDER hss tool INDUSTRIAL overhaul : : SAVINGS EVENT Save $41! JET Quick Change Tool Post Set Wedge Type Sets consist of one toolpost and 5 tool holders: #1Boring & Facing #2 Boring, Turning & Facing #4 Boring, Heavy Duty #7 Universal Parting Blade #10 Knurling, Facing & Turning STOCK NO $ carbide dead center STOCK NO $ half dead center Save $136! JET 5C Collet Sets and Racks Precision hardened and ground 5C Collets for use on lathes and tool and cutter grinder applications Premium collets with mm T.I.R. adjustable turning TOOL HOLDER parting tool holder STOCK NO $ live center drill sleeves TURNING Stock Number Description Swing List Price Sale Price Series Wedge Type Tool Post Set 10-15" $ $ Series Wedge Type Tool Post Set 13-18" $ $ Series Wedge Type Tool Post Set 14-20" $ $ C Lathes List Price Sale Price CS-5C 16 pcs 5-C collet set 1/8" to 1 1/16" by 1/16th $ $ pc Premium 5C collet set 1/16" to 1-1/8" by 16th with Metal rack $ $ pc Premium 5C collet set 1/16" to 1-1/8" by 32nds with Metal Rack $ $ C Lathe Collet Racks List Price Sale Price Metal collet rack holds 30 5C collets $14.50 $ Metal collet rack holds 72 5C collets $36.00 $29.99

15 Save $600! JET JVM-836 VERTICAL MILLING MACHINES Precision bored and honed milling head Large diameter quill is chromed High precision spindle bearings Over 10" of front to back ram travel Locks on all movable surfaces Hardened and ground precision table Head tilts left or right STOCK NO $4, Save $1,300! JET JTM-1 & JTM-2 VERTICAL MILLING MACHINES The JET Step Pulley milling machine is the perfect solution for maintenance shops, repair shops, job shops, schools and light production. Meehanite casting Precision bored and honed milling head Large diameter quill is chromed High precision Class 7 Spindle head is internally cooled Satin chrome finished dials Heavy-duty splined motor drive STOCK NO $5, $99 VALUE 5 GALLONS OF RUSTLICK POWERCOOL VISIT JETTOOLS.COM/COOLANT Stock Number JTM-1 JTM-2 Table Size (in.) 9 x 42 9 x 42 Spindle Taper R-8 R-8 Diameter of Quill (in.) 3-3/8 3-3/8 Number of Spindle Speeds 16 8 Range of Spindle Speeds (RPM) Downfeeds of Spindle (IPR) Spindle Travel (in.) 5 5 Head Movement (degrees) 90 R & L 45 F & B 90 R & L 45 F & B Distance Spindle to Table (max./in.) 17-1/2 17-1/2 Distance Spindle to Column (min./in.) 4-1/2 4-1/2 Distance Spindle to Column (max./in.) Longitudinal Table Travel (in.) (X-axis) 23-7/8 23-7/8 Cross Travel (in.) (Y-axis) 12-1/2 12-1/2 Collet Capacity (in.) 1/8-7/8 1/8-7/8 T-slots, Number & Size (in.) 3 and 5/8 3 and 5/8 2HP, 230V, 3Ph 2HP, 115/230V, 1Ph, Prewired 230V Overall Dimensions (in./w x D x H) 57 x 64 x x 64 x 82 Net Weight (lbs.) 2,200 2,200 List Price $7, $7, SALE PRICE $5, $5, JVM JVM Table Size (in.) 7-7/8 x 35-3/4 7-7/8 x 35-3/4 Spindle Taper R-8 R-8 Diameter of Quill (in.) 3-3/8 3-3/8 Number of Spindle Speeds 5 10 Range of Spindle Speeds (RPM) Spindle Travel (in.) 5 5 Head Movement (degrees) 90 R & L 90 R & L Distance Spindle to Table (max./in.) 13-3/4 13-3/4 Distance Spindle to Column (min./in.) 5-1/4 5-1/4 Distance Spindle to Column (max./in.) 15-3/4 15-3/4 Longitudinal Table Travel (in.) (X-axis) 22-1/4 22-1/4 Cross Travel (in.) (Y-axis) 9-1/2 9-1/2 Collet Capacity (in.) 1/8-7/8 1/8-7/8 T-slots, Number & Size (in.) 3 and 5/8 3 and 5/8 T-Slots Centers (in.) 2-1/2 2-1/2 Maximum Weight of Workpiece (lbs.) Travel of Knee (in.) (Z-axis) Travel of Ram (in.) 10-1/2 10-1/2 1-1/2HP, 115/230V, 1Ph, Prewired 115V 1-1/2hp, 230V, 3 Ph, Prewired 115V Overall Dimensions (in./w x D x H) 55 x 52 x x 52 x 78 Net Weight (lbs.) 1,544 1,544 List Price $5, $5, SALE PRICE $4, $4, JVM-836 VERTICAL MILLING MACHINES List Price Sale Price JVM Mill with X Powerfeed Installed $6, $5, JVM Mill with X Powerfeed Installed $6, $5, Shown with optional Powerfeed JTM-1 MILLING MACHINE DRO AND ACCESSORY PACKAGES List Price Sale Price JTM-1 Mill with X Powerfeed Installed $8, $6, JTM-1 Mill with ANILAM 411 DRO $8, $7, JTM-1 Mill with ANILAM 411 DRO & X Powerfeed Installed $9, $7, JTM-2 MILLING MACHINE DRO AND ACCESSORY PACKAGES List Price Sale Price JTM-2 Mill with X Powerfeed Installed $8, $6, JTM-2 Mill with 411 DRO $8, $7, JTM-2 Mill with 411 DRO & X Powerfeed Installed $9, $7, METALWORKING OVERHEAD LIFTING WAREHOUSE & DOCK HYDRAULIC & SHOP 15

16 PRICES EFFECTIVE: September 1 - December 31, 2010 Save $1,688! JET Variable Speed Miilling Machine JTM-4VS Meehanite casting Precision bored and honed milling head Large diameter quill is chromed High precision Class 7 spindle bearings Chrome plated motor shaft with lower bearing support Spindle head is internally cooled Satin chrome finished dials Heavy-duty splined motor drive 5 GALLONS OF RUSTLICK POWERSAW & KENNEDY ROLLER CABINET $724 VALUE Save $2,600! JET Variable Speed Vertical Milling Machines JTM-1050 Meehanite casting Hardened and ground table Chrome lead screws on X and Y axis Turcite B on X and Y axis Satin chrome finished dials Precision bored and honed milling head Large diameter quill is chromed High precision Class 7 spindle bearings Spindle head is internally cooled STOCK NO $10, GALLONS OF RUSTLICK POWERSAW & KENNEDY ROLLER CABINET $724 VALUE INDUSTRIAL overhaul : : SAVINGS EVENT Shown with optional 3-Axis DRO Shown with optional Powerfeed Shown with optional DRO Shown with optional Powerfeed 16 MILLING JTM-4VS VARIABLE SPEED VERTICAL MILLING MACHINES Stock Number List Price Sale Price JTM-4VS, 9" x 49" Table, R-8 Taper, 2HP, 1Ph, 115/230V $8, $7, JTM-4VS, 9" x 49" Table, R-8 Taper, 3HP, 3Ph, 230/460V $8, $7, Stock Number JTM-4VS MILLING MACHINE DRO AND ACCESSORY PACKAGES List Price Sale Price JTM-4VS Mill with ANILAM 411 DRO & X Powerfeed Installed $10, $8, JTM-4VS Mill with X Powerfeed Installed $9, $7, JTM-4VS-1 Mill with X Powerfeed Installed $8, $7, JTM-4VS-1 Mill with 411 DRO & X Powerfeed Installed $10, $8, JTM-4VS-1 Mill with 200S DRO & X Powerfeed Installed $11, $9, JTM-4VS Mill with ACU-RITE 200S DRO & X Powerfeed Installed $11, $9, JTM-4VS MILL W/300S DRO & X Powerfeed Installed $11, $9, JTM-4VS MILL W/DP 900 DRO & X Powerfeed Installed $11, $9, JTM-4VS-1 MILL W/300S DRO & X Powerfeed Installed $11, $9, Stock Number JTM-1050 THRU JTM-1055 SERIES VARIABLE SPEED VERTICAL MILLING MACHINES List Price Sale Price JTM-1050, 10" x 50", R-8 Taper, 3HP, 3Ph, 230/460V $11, $10, Stock Number JET JTM-1050 MILLING MACHINE DRO AND ACCESSORY PACKAGES List Price Sale Price JTM-1050 Mill with X Powerfeed Installed $13, $10, JTM-1050 Mill with 411 DRO & X Powerfeed Installed $13, $11, JTM-1050 Mill with ACU-RITE 200S DRO & X Powerfeed Installed $15, $12, JTM-1050 MILL W/300S DRO & X Powerfeed Installed $15, $12, JTM-1050 MILL W/DP900 DRO & X Powerfeed Installed $15, $12,999.00

17 Save $1,800! JET JTM-1054R/JTM-1055 FEATURES Meehanite casting Hardened and ground table certified to be 52C Rockwell hardness Chrome leadscrews on X and Y axis Box style ways on Y and Z axis Satin chrome finished dials Precision bored and honed milling head Large diameter quill is chromed High precision Class 7 spindle bearings Chrome plated motor shaft has lower bearing support pulleys are ground to increase belt lift One-piece quill pinion and shaft STANDARD EQUIPMENT One-shot lubrication system Way covers Draw bar tool box with tools STOCK NO $12, Stock Number $698 VALUE 5 GALLONS OF RUSTLICK POWERCOOL & KENNEDY ROLLER CABINET JTM-1050 THRU JTM-1055 SERIES VARIABLE SPEED VERTICAL MILLING MACHINES List Price Sale Price JTM-1054R, 10" x 54" Table, R8 Taper, 5HP, 3Ph, 230/460V $14, $12, JTM-1055, 10" x 54" Table, #40 Taper, 5HP, 3Ph, 230/460V $14, $12, JTM-1054R 5 MILLING MACHINE DRO AND ACCESSORY Stock Number PACKAGES List Price Sale Price JTM-1054R Mill with 200S DRO & X Powerfeed Installed $16, $13, JTM-1054R Mill with 411 DRO & X Powerfeed Installed $15, $12, JTM-1054R MILL W/300S DRO & X Powerfeed Installed $16, $14, JTM-1054R MILL W/DP900 DRO & X Powerfeed Installed $16, $14, JTM-1055 MILLING MACHINE DRO AND ACCESSORY Stock Number PACKAGES List Price Sale Price JTM-1055 Mill with Anilam 411 Wizard DRO and X Powerfeed Installed $16, $13, JTM-1055 MILL W/300S DRO & X Powerfeed Installed $18, $14, CNC TRAINING Save $1,560! JET CNC VERTICAL TURRET MILLING MACHINES Meehanite casting Precision bored and honed milling head Large diameter quill is chromed High precision Class 7 spindle bearings Chrome plated motor shaft with lower bearing support ACU-RITE MILLPWR 2- OR 3-AXIS CONTROL Increased Productivity, mill more efficiently and effectively Bolthole Calculations, calculate bolthole patterns instantly Tool Offsets and Tool Library Jog Control, move quickly from one location to another using one axis at a time or any two axes simultaneously 3-D Contouring, ability to import and run G-code files from CAD/CAM programs STOCK NO $20, HOURS OF IN-HOUSE TRAINING FROM ACU-RITE JTM-4VSCNC, 2-axis CNC JTM-4VSCNC, 3-axis CNC JTM-1050CNC, 2-axis CNC JTM-1050CNC, 3-axis CNC Number of CNC Control Axis Table Size (in.) 9 x 49 9 x x x 50 Spindle Taper R-8 R-8 R-8 R-8 Diameter of Quill (in.) 3-3/8 3-3/8 3-3/8 3-3/8 Number of Spindle Speeds Variable Variable Variable Variable Range of Spindle Speeds (RPM) 60-4, , , ,800 Downfeeds of Spindle (per/rev./in.) Spindle Travel (in.) Head Movement (degrees) 90 R & L 45 F & B 90 R & L 45 F & B 90 R & L 45 F & B 90 R & L 45 F & B Distance Spindle to Table (max./in.) 17-1/2 17-1/ Distance Spindle to Column (max./in.) /2 26-1/2 Distance Spindle to Column (min./in.) 6-3/4 6-3/4 6 6 Collet Capacity (in.) 1/8-7/8 1/8-7/8 1/8-7/8 1/8-7/8 Longitudinal Table Travel (in.) (X-axis) Cross Travel (in.) (Y-axis) T-slot Number & Size (in.) 3 and 5/8 3 and 5/8 3 and 5/8 3 and 5/8 T-slot Centers (in.) 2-1/2 2-1/2 2-1/2 2-1/2 Maximum Weight of Work piece (lbs.) Travel of Knee (in.) (Z-axis) /2 16-1/2 Travel of Ram (in.) 12-1/4 12-1/4 21-1/4 21-1/4 $698 VALUE 5 GALLONS OF RUSTLICK POWERCOOL & KENNEDY ROLLER CABINET 3HP, 230/460V, 3Ph, Prewired 230V 3HP, 230/460V, 3Ph, Prewired 230V 3HP, 230/460V, 3Ph, Prewired 230V 3HP, 230/460V, 3Ph, Prewired 230V Overall Dimensions (in./w x D x H) 65-1/2 x 63 x /2 x 63 x /4 x 68-3/4 x /4 x 68-3/4 x 87 Net Weight (lbs.) 2,900 2,900 3,200 3,200 Stock Number JET CNC Vertical Turret Milling Machines List Price Sale Price JTM-4VS Mill with ACU-RITE 2-axis CNC Installed $22, $20, JTM-4VS Mill with ACU-RITE 3-axis CNC Installed $26, $22, JTM-1050 Mill with ACU-RITE 2-axis CNC Installed $26, $24, JTM-1050 Mill with ACU-RITE 3-axis CNC Installed $29, $27, METALWORKING OVERHEAD LIFTING WAREHOUSE & DOCK HYDRAULIC & SHOP 17

18 PRICES EFFECTIVE: September 1 - December 31, 2010 Save $80! JET 24 pc. Milling Tool Kit for R8-Spindle Milling Machines 5 pc Wiggler Set 5pc 1/2" HSS Boring Bars 1pc Drill Drift 3pc Edge Finders 1pc Arbor JT6 to R8 1pc Adapter R8 to MT3 1pc 3/4" Shank 1pc 3/4" Boring Head 3pc. Hex Keys 1pc 2-1/2" Fly Cutter 1pc 3/8 x 3" Square Tool Bit 1pc Blank R8 Arbor STOCK NO $ Save $490! JET Milling Accessory Kit Collet Set CS-R8, 6 pc. R-8 Collet Set 1/8"- 3/4" by 1/8ths for Mills Clamping Kit includes metal storage tray can be mounted on machine or wall, Three complete sets to choose from 52 pc. kit includes: Six T-slot nuts Tooling Kit 24 pc. Milling Tool Kit for R8-Spindle Milling Machines Verti-lock Machine Vise STOCK NO KT...$ INDUSTRIAL overhaul : : SAVINGS EVENT Stock Number Description List Price Sale Price piece Milling Tool Kit for R8-Spindle Milling Machines $ $ Save $4! JET Block Set Squareness: Parallelism: Height accuracy in pairs +/ Hardness HRC pc 3/8-16 socket head cap screws 1pc hex key Plastic Case STOCK NO $31 99 List Stock Number Description Price Sale Price Block Set In Plastic Case $36.00 $31.99 Save $50! JET CLAMPING KITS Metal storage tray can be mounted on machine or wall 3 complete sets to choose from 52-piece kit includes: six T-slot nuts, six Flange nuts, four Coupling nuts, six Step blocks, six Step clamps, twenty-four Studs, four each (3, 4, 5, 6, 7, and 8 lengths) STOCK NO $79 99 Stock Number Description List Price Sale Price KT Milling Accessory Kit $1, $ Save $16! JET 20-PIECE TiN COATED END MILL SETS TiN (Titanium Nitride) coating provides extreme hardness and heat resistance allowing tool to run at higher speeds and feeds. Excellent for general-purpose use as TiN provides higher lubricity for freer chip flow, reduced buildup edge formations and catering. Square end mill types are used for general milling applications STOCK NO $ Stock Number Description List Price Sale Price PC TiN Coated Double End Mill Set 3/16-3/4" by 16ths 1 ea 2 & 4 Flute $ $ PC TiN Coated Single End Mill Set 3/16-3/4" by 16ths 1 ea 2 & 4 flute $95.00 $85.99 Save $28! R8 collet sets and racks Precision hardened and ground R8 Collets for use on milling machines Premium collets with mm T.I.R. STOCK NO $ MILLING 18 Stock Number Stud Size T-Slot Sizes (in.) List Price Sale Price CK-12 1/2" - 13 T.P.I. 9/16 and 5/8 $ $ CK-38 3/8" - 16 T.P.I 7/16 and 1/2 $ $ CK-58 5/8" - 11 T.P.I. 11/16 and 3/4 $ $ Stock Number COLLET SETS, 5C AND R8 COLLET SETS List Price Sale Price CS-R8, 6-piece R-8 Collet Set 1/8" - 3/4" by 1/8ths for Mills $ $ Premium 14 PC R-8 Collet Set with Rack 16TH $ $ pc Premium R-8 collet set 2mm -20mm by 1mm with Rack $ $ Stock Number COLLET RACKS List Price Sale Price R-8 Collet Rack - Holds 12 Collet $13.00 $ R-8 Vertical Collet Rack - Holds 48 $25.00 $ R-8 Wooden Collet Rack - Holds 14 $10.00 $7.99

19 Save $150! Kennedy Drawer Roller Cabinet with top mat Universal Drawer Slide System offers unlimited flexibility of drawer configuration and drawer slide selection. Ongoing vibration, load impact and other destructive testing in engineering facilities makes sure the products are built right. Heavy-gauge steel top, bottom and back panels are securely welded to the double-wall side panels; giving the cabinet a tight, solid fit. Three member, full ball-bearing slides with four levels of ball bearings permit effortless, feather-light movement even though drawers are fully loaded. Cabinet top panels are reinforced for added strength and rigidity. Powder finish that is resistant to corrosion, abrasions and chipping. The heavy-gauge steel, one-piece cabinet bottom panels are reinforced to provide added strength and greater load capacity without sagging. The tamper-proof, internal drawer locking system cannot be reached by bolt cutters or hacksaw. STOCK NO $ Stock Number JET Kennedy Tool Boxes List Price Sale Price Kennedy Drawer Roller Cabinet with top mat $ $ Kennedy Portable 2 Drawer Chest 220 $ $ Save $200! JET MILLING/DRILLING MACHINES One-piece cast iron column for added support Belt cover quick slide latch allows faster belt adjustment to change spindle speeds Base taper allows for easier clean-up Larger hand wheel knobs Extra large work tables Heavy-duty tapered roller bearings support the spindle resulting in greater tolerance and more accurate drilling depth 360 head swivel STOCK NO $1, Save $60! JET 15 & 20 Step Pulley Drill Presses Cast iron head Large quill allows greater accuracy Head casting features a permanently lubricated ball bearing spindle assembly, using four heavy duty ball bearings mounted in an enclosed quill for extended life Massive T-slotted production work table ( J-2550 only) Large ground steel column diameter for maximum head and table support STOCK NO $ MADE IN THE USA Shown with Stand. A $305 VALUE! (350045) Can be paired with the Drawer Chest for a handy combo! 4-Drawer Roller Cabinet 2-Drawer Chest Overall Dimensions 21"W x 18" D x 28" H 20-1/2"W x 8-3/4" D x 9-34" H Drawer Dimensions (2) 16-1/2" W x 16-1/2" D x 2-3/4" H (1) 16-1/2" W x 16-1/2" D x 6" H (2) 18-1/4" W x 7-3/8" D x 2-4/4" H (1) 16-1/2" W x 16-1/2" D x 9" H Top Tilt Dimensions - 20"W x 8-3/8" x 2-/4" H Stock Number JMD-15 JMD-18 JMD-18PFN Drilling Cap y (in.) 1 1-1/4 1-1/4 Face Mill Cap y (in.) 2-1/2 3 3 End Mill Cap y (in.) 1/2 3/4 3/4 Number of Spindle speeds: Max Distance Spindle to Table ( in.): Spindle Taper: R-8 R-8 R-8 Quill Diameter (in.): 2 1/2 3 3 T-Slots Number and Size (in.): 4 and 9/16 4 and 5/8 4 and 5/8 : 1HP, 115/230V,1Ph 2HP, 230V Only, Prewired 115V 1Ph 2HP, 1Ph, 230V Only T-Slot Centers (in.): 1 13/ / /16 Distance Base to Spindle Table Size (in.): 7-1/2 x /2 x 31-3/4 9-1/2 x 31-3/4 Net Weight(lbs): Floor Space Required L 37" X W 38" X H 37" L 43" X W 40" X H 44" L 42" X W 40" X H 52" List Price $1, $2, $2, Sale Price $1, $1, $2, Packages & Accessories List Price Sale Price CS-18, Stand for & $ $ Stock Number Number J-2530 J-2500 J-2550 Type 15" Bench 15" Floor 20" Floor Drills to Center of Circle (in.) Cast Iron Drilling Capacity (max./in.) 5/8 5/8 3/4 Steel Drilling Capacity (max./in.) 1/2 1/2 5/8 Quill Diameter (in.) 1-7/8 1-7/8 2-1/4 Quill Travel (in.) 3-3/8 3-3/8 4-3/4 Spindle Taper 2 MT 2 MT 3 MT Separate Number & Range of Spindle Speeds (RPM) 12 (250, 340, 390, 510, 600, 650, 990, 1550, 1620, 1900, 2620, 3100) 12 (250, 340, 390, 510, 600, 650, 990, 1550, 1620, 1900, 2620, 3100) 12 (150, 260, 300, 440, 490, 540, 1150,1550,1840, 2220, 2950, 4200) Overall Table Size (in.) 10 x x /2 x 16-1/2 Column Diameter (in.) 2-7/8 2-7/8 3-5/8 Base Size (in.) 11 x 18-1/2 11 x 19-1/2 22-3/4 x 17-3/4 Spindle to Base (in.) 24-1/2 48-3/4 43-1/2 3/4HP, 115V, 1Ph, 1725 RPM 3/4HP, 115V, 1Ph, 1725 RPM 1-1/2HP, 115V, 1Ph, 1725 RPM Floor Space Required (in./l x W x H) 26 x 13-3/8 x x 13-3/8 x 63-1/2 34 x 21 x 67 Net Weight (lbs.) List Price $ $ $1, Sale Price $ $ $ METALWORKING OVERHEAD LIFTING WAREHOUSE & DOCK HYDRAULIC & SHOP 19

20 DRILLING PRICES EFFECTIVE: September 1 - December 31, 2010 INDUSTRIAL overhaul : : SAVINGS EVENT 20 SAWING Save $200! JET 15" 6-SPEED STEP PULLEY DRILL PRESS Constructed to provide a solid base for drilling Offers a grater range in spindle speeds than others in this class Larger quill provides greater accuracy STOCK NO $1, Save $300! JET 15" VARIABLE SPEED DRILL PRESSES Speeds from 400 to 5,000 RPM Handwheel adjustment sets the speeds Large 2-1/4 quill allows greater accuracy 3" column diameter for maximum head support Accurate depth stop for precise hole depths STOCK NO $1, Save $250! JET 20" STEP PULLEY DRILL PRESS Hinged metal belt and pulley cover coupled with quick adjustment motor mount allow rapid changing of spindle speeds Rotating, 45 tilting, crank-operated worktable with quick release clamp On/off switch located on front of the drill press head A 1/2 diameter external positive depth stop with three nut locking features for quick adjustment STOCK NO $ Stock Number J-A3816 : 1HP, 115/230VAC, 1ph, Prewired 115VAC Number of Spindle speeds: 6 Range of Spindle Speeds (RPM): 375, 625, 1125, 1950, 3400, 5000 Spindle Taper: 2MT Quill Diameter (in.): 2-1/4 Max Distance Spindle to Table ( in.): 41 T-Slots Number and Size (in.): 2 x 1/2 Work Table Weight Capacity (lbs.): 100 Column Diameter (in.): 3 Base Dimensions (LxWxH/ in.): 30 x 20 Drilling Capacity Cast Iron (in.): 5/8 Drilling Capacity Mild Steel (in.): 1/2 Quill Travel (in.): 6 Distance Base to Spindle (in.): 47-1/2 Table Size (in.): 12-1/2 x 14-1/2 Chuck Size (in.): 1/2 Drills to Center of Circle (in): 15 Spindle Distance to Base (in.): 47-1/2 Quill Feed: Manual Spindle Travel (in.): 6 Table Dimensions: 15-1/4 x 17-3/4 List Price $1, Sale Price $1, Stock Number Number J-A5816 J-A5818 Type 15" Floor 15" Floor Range of Spindle Speeds (RPM): 400 to to 5000 Spindle Taper: 2 MT 2 MT Quill Diameter (in.): 2 1/4 2 1/4 T-Slots Number and Size (in.): 2 & 1/2 2 & 1/2 Work Table Weight Capacity (lbs.): 12-1/2 x 14-1/2 12-1/2 x 14-1/2 Column Diameter (in.): 3 3 Drilling Capacity Cast Iron (in.): 5/8 5/8 Drilling Capacity Mild Steel (in.): 1/2 1/2 Quill Travel (in.): 6 6 Table Size (in.): 15-1/4 x 17-3/4 15-1/4 x 17-3/4 Spindle Distance to Base (in.): 47-1/2 47-1/2 Net Weight: : 1 HP, 115/230V, 1Ph, Prewired 115V 1HP, 220/440V, 3Ph, Prewired 220V List Price $1, $1, Sale Price $1, $1, $160 VALUE CAM-ACTION VISE Stock Number JPD-20MF Drills to Center of Circle (in.) 20-1/2 Drilling Capacity (in.) 1 Chuck Size 3/4 Number of Spindle Speeds 12 Spindle Taper MT-3 T-slot Size (in.) 5/8 Column Diameter (in.) 3-3/8 Base Demensioins (in./l x W) 13-5/8 x 22-3/8 Quill Travel 4-5/8 1-1/2HP, 1Ph 115/2320V Prewired 115V Floor Space Required (in./l x W) 13-5/8 x 22-3/8 Net Weight (lbs.) 293 List Price $ Sale Price $749.00

21 Save $600! JET 20" VARIABLE SPEED DRILL PRESSES Variable spindle speeds from 300 to 2000 RPM External #3 Morse Taper Front mounted positive control depth stop Massive 3" quill diameter Heavy-duty cast iron design Table rotates 360 around column STOCK NO $2, Save $700! JET 20" ELECTRONIC VARIABLE SPEED DRILL PRESSES Runs quieter and smoother than a conventional variable speed head 230V model can run on single phase power Low maintenance head has less moving parts Incorporates a high-low box to maintain low speed torque Chrome molybdenum gears are hardened, ground, and shaved STOCK NO $3, Save $800! JET 20" GEARED HEAD DRILL PRESS Heavy duty design allows a variety of precision drilling applications Easy to read internal depth gauge (GHD-20) Three power down feeds (GHD-20PF) Calibrated fine down feed built-in Built-in spindle lock Head tilts left or right Easy accessible table raiser Large production table and T-slotted base STOCK NO $2, Stock Number Number J-2221VS J-2223VS Drills to Center of Circle (in.) Cast Iron Drilling Capacity (in.) 1-1/4 1-1/4 Steel Drilling Capacity (in.) 1 1 Column Diameter (in.) 4-1/2 4-1/2 Range of Spindle Speeds (RPM) 300 to to 2000 Spindle Travel (in.) 6 6 Spindle Taper 3 MT 3 MT Quill Diameter (in.) 3 3 Table Size (in.) 18-1/8 x 14-3/4 18-1/8 x 14-3/4 T-Slots Number & Size (in.) 2 & 5/8 2 & 5/8 Table Travel (in.) 32-3/8 32-3/8 Base Working Surface (in.) 15-1/4 x 12-1/ /4 x 12-1/16 Base Slots Number & Size (in.) 2 & 5/8 2 & 5/8 2HP, 115/220V, 1Ph, Prewired 115V 2HP, 220/440V, 3Ph, Prewired 440V Floor Space Required (in./l x W x H) 34-1/4 x 27 x 77-1/4 34-1/4 x 27 x 77-1/4 Net Weight (lbs.) List Price $3, $3, Sale Price $2, $2, Stock Number JDP-20EVS/230 JDP-20EVS/460 Drills to Center of Circle (in.) Cast Iron Drilling Capacity (in.) 1-1/2 1-1/2 Steel Drilling Capacity (in.) 1-3/8 1-3/8 Steel Tapping Capacity (in.) 3/4 3/4 Column Diameter (in.) 4-1/2 4-1/2 Spindle Taper MT-3 MT-3 Spindle Travel (in.) 6 6 Number of Spindle Speeds Variable Variable Range of Spindle Speeds (RPM) Table Size (in.) 22 x 18-3/4 22 x 18-3/4 T-slot (Number & Size) (in.) 2 & 5/8 2 & 5/8 Main 2HP, 230V, 3Ph 2HP, 460V, 3Ph Coolant 1/8HP, 3Ph 1/8HP, 3Ph Floor Space Required (in./l x W x H) 37 x 37 x 82-1/4 37 x 37 x 82-1/4 Net Weight (lbs.) List Price $4, $4, Sale Price $3, $3, Stock Number GHD-20 GHD-20PF Drills to Center of Circle (in.) Cast Iron Drilling Capacity (in.) 1-1/2 1-1/2 Steel Drilling Capacity (in.) 1-1/4 1-1/4 Column Diameter (in.) 4-1/2 4-1/2 Distance Spindle to Column (max./in.) Spindle Taper MT-3 MT-3 Spindle Travel (in.) (GHD-20) 5 5 Spindle Travel (in.) (GHD-20PF) Manual 4-1/2 4-1/2 Spindle Travel (in.) (GHD-20PF) Auto 4-1/4 4-1/4 Quill Diameter (in.) 3 3 Spindle Distance to Base (in.) 44-3/8 44-3/8 Spindle Distance to Table (in.) 30-7/8 30-7/8 Table Size (in.) 21-1/4 x 18-1/2 21-1/4 x 18-1/2 T-slots, Number & Size (in.) 2 & 5/8 2 & 5/8 T-slot Centers (in.) 9 9 Number of Spindle Speeds Range of Spindle Speeds (RPM) 60 & 3, & 3,000 Number of Powerfeeds (GHD-20PF) - 3 Range of Powerfeeds.004,.007, ,.007,.01 2HP, 230V only, 3Ph, 2 Speed 2HP, 230V only, 3Ph, 2 Speed Floor Space Required (in./l x W x H) 32 x 24 x x 24 x 71 Net Weight (lbs.) List Price $3, $4, Sale Price $2, $3, METALWORKING OVERHEAD LIFTING WAREHOUSE & DOCK HYDRAULIC & SHOP 21

22 PRICES EFFECTIVE: September 1 - December 31, SAWING DRILLING INDUSTRIAL overhaul : : SAVINGS EVENT Save $900! JET 20" GEARED HEAD DRILLING & TAPPING PRESSES Heavy-duty design allows a variety of precision drilling and tapping applications Easy to read internal depth gauge Three power down feeds (GHD-20PFT) Built-in spindle lock Head tilts left or right Easy accessible table raiser Large production table and T-slotted base STOCK NO $3, Stock Number Number GHD-20T GHD-20PFT Drills to Center of Circle (in.) Cast Iron Drilling Capacity (in.) 1-1/2 1-1/2 Cast Iron Tapping Capacity (in.) 13/16 13/16 Steel Drilling Capacity (in.) 1-1/4 1-1/4 Column Diameter (in.) 4-1/2 4-1/2 Distance Spindle to Column (max./in.) Spindle Taper MT-3 MT-3 Spindle Travel: Manual 5 4-1/2 Spindle Travel: Auto 4-1/4 Tapping 4-7/8 4-7/8 Quill Diameter (in.) 3 3 Spindle Distance to Base (in.) 44-3/8 44-3/8 Spindle Distance to Table (in.) 30-7/8 30-7/8 Table Size (in.) 21-1/4 x 18-1/2 21-1/4 x 18-1/2 T-slots, number & size 2 & 5/8 2 & 5/8 T-slot Centers 6-1/4 6-1/4 Number of Spindle Speeds Range of Spindle Speeds (RPM) 60-3, ,000 Number of Powerfeeds 3 Range of Powerfeeds.004,.007,.01 2HP, 230V, 3Ph, 2-speed 2HP, 230V, 3Ph, 2-speed Floor Space Required (in./l x W x H) 32 x 24 x x 24 x 71 Net Weight (lbs.) List Price $4, $4, Sale Price $3, $4, Save $1,400! JET /ARBOGA 26" GEAR HEAD DRILL PRESSES w/ power downfeed Helical gears for smooth, quiet operation Quick release drill ejector English/Metric Depth gauge Machined T-Slotted base plate Head and table rotate 360 degrees around column STOCK NO $7, Made In Sweden Stock Number Number J-A3008M-PF2 J-A3008M-PF4 Drills to Center of Circle (in.) Drilling Capacity Mild Steel (in.) 1-1/4 1-1/4 Tapping Capacity Mild Steel (in.) 5/8 5/8 Column Diameter (in.) 4-1/2 4-1/2 Range of Spindle Speeds (RPM) 90, 190, 320, 530, 640, 1060, 1790, , 190, 320, 530, 640, 1060, 1790, 3610 Spindle Taper 3MT 3MT Quill Feed Power Feed Power Feed Distance Spindle to Table (max./in.) Quill Feed Rates (IPR) 4(.004,.006,.009,.012) 4(.004,.006,.009,.012) Quill Travel (in.) 6 6 Quill Diameter (in.) 2-7/16 2-7/16 Vertical Movement of Drill Head (in.) 9 9 Table Size (in.) 15-3/4 x 19-3/4 15-3/4 x 19-3/4 T-slot Number & Size (in) 2 x 9/16 2 x 9/16 Table Weight Capacity (lbs.) Vertical Movement of Table (in.) /2-2HP, 220V, 3ph 1-1/2-2HP, 440/460V, 3ph Net Weight (lbs.) List Price $9, $9, Sale Price $7, $7, Save $800! JET /ARBOGA 20" GEAR HEAD DRILL PRESSES Helical gears for smooth, quiet operation Quick release drill ejector Safety latch to prevent head dropping when unclamped STOCK NO $4, Made In Sweden Stock Number Number J-A2608-1/J-A Drills to Center of Circle (in.) 20 Drilling Capacity Mild Steel (in.) 1-1/4 Tapping Capacity Mild Steel (in.) 1/2 Column Diameter (in.) 3-15/16 Distance Spindle to Table (max./in.) 35-5/8 Spindle Taper 3 MT Spindle Speeds (RPM) 8 (130, 260, 420, 840, 535, 1070, 1745, 3480) Quill Feed Manual Quill Travel (in.) 5-1/8 Quill Diameter (in.) 2-3/8 Vertical Movement of Drill Head 8-5/8 Table Size (in.) 15-3/4 x 19-3/4 T-slot Number & Size (in) 2 & 9/16 Table Weight Capacity (lbs.) 350 Vertical Movement of Table (in.) 24-1/2 for (2 speed) 3/4 to 1HP, 115V, 1Ph for (2 speed) 1 to 1-1/2HP, 220V, 3Ph for (2 speed) 1 to 1-1/2HP, 440/460V, 3Ph Floor Space Required (in./l x W x H) 24 x 22 x 72 Net Weight (lbs.) 492 List Price $5, $5, $5, Sale Price $4, $4, $4, Save $900! JET /ARBOGA 26" GEAR HEAD DRILL PRESSes Helical gears for smooth, quiet operation Quick release drill ejector English/Metric depth gauge Machined T-slotted base plate STOCK NO $5, Made In Sweden Stock Number Number J-A J-A : 1-1/2-2HP, 220V, 3ph 1-1/2-2HP, 440/460V, 3ph Number of Spindle speeds: 8 8 Range of Spindle Speeds (RPM): 90, 190, 320, 530, 640, 1060, 1790, , 190, 320, 530, , 1790, 3610 Spindle Taper: 3MT 3MT Quill Diameter (in.): 2-7/16 2-7/16 Max Distance Spindle to Table ( in.): T-Slots Number and Size (in.): 2 x 9/16 2 x 9/16 Work Table Weight Capacity (lbs.): Column Diameter (in.): 4-1/2 4-1/2 Base Dimensions (LxWxH/ in.): 28 x x 24 Drilling Capacity Cast Iron (in.): 1-3/8 1-3/8 Drilling Capacity Mild Steel (in.): 1-1/4 1-1/4 Tapping Capacity Cast Iron (in.): 3/4 3/4 Tapping Capacity Mild Steel (in.): 5/8 5/8 Net Weight (lbs.) List Price $6, $6, Sale Price $5, $5,999.00

23 DRILLING Save $2,000! JET ARBOGA 26" GEAR HEAD DRILL PRESSES Helical gears for smooth, quiet operation Quick release drill ejector English/Metric depth gauge Machined, T-Slotted base plate Head and table rotate 360 around column No-volt release prevents spindle start when power returns after shut down Fully enclosed spindle Large T-Slotted Table STOCK NO $11, Made In Sweden Stock Number / Number J-A4008M-PF2 / J-A4008M-PF4 Drills to Center of Circle (in.) 26 Drilling Capacity Mild Steel (in.) 1-7/8 Tapping Capacity Mild Steel (in.) 1 Column Diameter (in.) 5-1/2 Range of Spindle Speeds (RPM) 8 (108, 162, 240, 360, 528, 805, 1175, 1800) Spindle Taper 4 MT Quill Feed Power Feed Quill Feed Rates (IPR) 4 (.004,.006,.009,.013 ) Quill Travel (in.) 8 Quill Diameter (in.) 2-3/4 Distance Spindle to Table (max./in.) 32 Table Size (in.) 20 x 24 Table Weight Capacity (lbs.) 550 Vertical Movement of Table (in.) 25 for A4008-2/ A4008M-PF2 3HP, 220V, 3Ph for A4008-4/ A4008M-PF4 3HP, 440/460V, 3Ph Floor Space Required (in./l x W x H) 23 x 28 x 81 Net Weight (lbs.) 820 List Price $13, Sale Price $11, Save $996! JET DIRECT DRIVE DRILL PRESSES WITH MECHANICAL CLUTCH Two speed forward and reverse switch Mechanical Powerfeed clutch engagement Heavy duty quill and spindle tempered, ground spindle with internal taper mounted in precision bearings for maximum accuracy, minimizing deflection STOCK NO $14, Stock Number Number J-2350 J-2360 J-2380 Drilling Capacity Cast Iron (in.) 1-7/8 2-5/32 2-7/8 Drilling Capacity Mild Steel (in.) 1-3/ /4 Distance Column to Spindle (in.) /2 Range of Spindle Speeds (RPM) 82, 120, 180, 240, 354, 55, 98, 156, 198, 346, 456, 576, 822, 1338 Made In Spain 42, 58, 86, 116, 154, 249, 304, 412, 554, 748, 1098, 1458 Spindle Travel (in.) Spindle Distance to Base (in.) Spindle Distance to Table (max./in.) 30-1/2 30-1/2 30-1/2 Table Size (in.) 22 x x /2 x 23-1/2 T-Slots Number and Size (in.) 2 & 5/8 3 & 5/8 3 & 5/8 Work Table Weight Capacity (lbs.) Spindle Taper MT-4 MT-4 MT-5 Base Dimensions (in./ LxWxH) 102 x 25 x x 30 x x 33 x 54 Base Slots Number & Size (in.) 3 & 5/8 3 & 5/8 3 & 5/8 3HP, 230/460V, 3 Ph, Prewired 230V 4HP, 230/460V, 3 Ph, Prewired 230V 7-1/2HP, 230/460V, 3 Ph, Prewired 230V Floor Space Required (in./ LxWxH) 40 x 30 x x 30 x x 33 x 110 Net Weight (lbs.) List Price $14, $15, $22, Sale Price $13, $14, $21, Save $3,000! JET 3' & 4' RADIAL DRILL PRESSES The power train gears and spline shafts are made of the finest quality, heat treated and ground nickel chrome steel giving extra strength and smoothness to high torque loads The spindle is made of the finest case hardened steel for extra strength and wear STOCK NO $21, Stock Number Number J-720R J-1100R J J-1230R J-1230R-4 Steel Drilling Capacity (in.) 1-1/2 1-3/4 1-3/4 1-7/8 1-7/8 Cast Iron Drilling Capacity (in.) 2 2-1/4 2-1/4 2-5/16 2-5/16 Steel Tapping Capacity (in.) 3/ Cast Iron Tapping Capacity (in.) 1 1-1/4 1-1/4 1-1/2 1-1/2 Steel Boring Capacity (in.) 2-3/4 3-3/8 3-3/8 3-3/8 3-3/8 Cast Iron Boring Capacity (in.) 4 4-3/4 4-3/4 4-3/4 4-3/4 Column Diameter (in.) 8-1/4 10-1/4 10-1/ / /16 Distance from Column to Spindle (max./in.) 29-1/2 43-5/ / Distance from column to spindle center, 8-5/8 9-5/8 9-5/8 13-3/4 13-3/4 (min./in.) Travel of head (Horizontal/in.) 20-7/8 33-5/8 33-3/ Distance from base to spindle end, (max./in.) 41-3/4 50-3/8 50-3/ Distance from base to spindle end, (min./in.) 9-5/8 12-5/8 12-5/8 19-3/8 19-3/8 Travel of arm (Vertical/ in.) 23-13/ /8 34-5/8 Table Size (in.) 23-5/8 x 17-1/2 x /4 x 24-3/4 x 27-7/8 x 27-7/8 x 20-1/2 x 20-1/2 x 20-1/2 x 20-1/2 x 16-1/2 16-1/2 16-1/2 16-1/2 T-slot Number & Size (in) 3 & 3/4 3 & 3/4 3 & 3/4 3 & 3/4 3 & 3/4 Base Dimensions (in.) Range of Spindle Speeds (RPM) Feed Rates (IPR) 49-5/8 x 25-3/16 x 6-9/32 6 ( ).002,.004,.006 3HP, 230/460V, 3Ph, Prewired 230V 67-3/4 x 28 x 6-1/2 67-3/4 x 28 x 6-1/2 67-3/4 x 28 x 6-1/2 67-3/4 x 28 x 6-1/2 12 ( ) 12 ( ) 12 ( ) 12 ( ) 3 (.002,.004,.006) 1-1/2 to 3HP, 230V, 3Ph 3 (.002,.004,.006) 1-1/2 to 3HP, 460V, 3Ph KENNEDY ROLLER CABINET 3 (.002,.004,.006) 2-1/2 to 5HP, 230V, 3Ph $599 VALUE 3 (.002,.004,.006) 2-1/2 to 5HP, 460V, 3Ph Elevating 1HP 1HP 1HP 1HP 1HP Clamping 1HP 1HP 1HP 1HP Coolant Pump 1/8HP 1/8HP 1/8HP 1/8HP 1/8HP Machine Height from Floor (max./in.) 85-7/ / /2 Floor Space Required (in./l x W x H) 64 x 32 x x 34 x x 34 x x 39 x x 39 x 89 Shipping Weight (lbs.) List Price $11, $17, $17, $24, $24, METALWORKING OVERHEAD LIFTING WAREHOUSE & DOCK HYDRAULIC & SHOP 23 Sale Price $10, $16, $16, $21, $21,999.00

24 PRICES EFFECTIVE: September 1 - December 31, 2010 Kennedy Roller Cabinet $599 VALUE Save $2,500! JET 5' ARM RADIAL DRILL PRESS The power train gears and spline shaft are made of the finest quality, heat treated and ground nickel-chrome steel, giving extra strength and smoothness to high torque loads The spindle is made of the finest case hardened steel for extra strength and wear The spindle is supported by double row taper roller and thrust ball bearings at the nose, with thrust and radial axis bearings at the top The spindle is built to withstand exceptionally heavy drilling and boring loads and to insure maximum accuracy STOCK NO $40, STOCK NUMBER Number J-1600R J-1600R-4 Drilling Capacity Mild Steel (in.) 2-1/2 2-1/2 Drilling Capacity Cast Iron (in.) 2-5/16 2-7/8 Tapping Capacity Mild Steel (in.) 2 2 Tapping Capacity Cast Iron (in.) 2-3/8 2-3/8 Boring Capacity Steel (in.) 5 5 Boring Capacity Cast Iron (in.) 7-3/8 7-3/8 Column Diameter (in.) Distance Column to Spindle (min/in.) 13-3/8 13-3/8 Distance Column to Spindle (max/in.) 62-1/4 62-1/4 Travel of Head Horizontal (in.) 44-7/8 44-7/8 Distance Base to Spindle (min/in.) Distance Base to Spindle (max/in.) Arm Travel Vertical (in.) 33-15/ /32 Table Dimensions (in.) 27-7/8 x 19-5/8 x 15-3/4 27-7/8 x 19-5/8 x 15-3/4 Base Dimensions (in.) 97-5/8 x 41-11/32 x 8-1/4 97-5/8 x 41-11/32 x 8-1/4 Quill Travel (in.) 14-9/ /16 Spindle Taper MT-5 MT-5 Quill Travel w/ Powerfeed engaged (in.) Number of Spindle speeds (RPM) 12 ( ) 12 ( ) Quill Down feed Rates (IPR) 6 ( IPR) 6 ( IPR) 7-1/2HP, 230/460V, 3Ph, 1HP Prewired 230V 7-1/2HP, 460V, 3Ph 1/8HP Elevating 2HP 2HP Coolant Pump 1/8HP 1/8HP Machine Hieght from Floor (in.) Overall Dimensions (in./ LxWxH) 116 x 55 x x 55 x 116 Net Weight (lbs.) List Price $42, $42, Sale Price $40, $40, INDUSTRIAL overhaul : : SAVINGS EVENT Save $20! JET 1" x 42" & 2" x 42" BENCH BELT & DISC SANDERS Hinged idler wheel cover Power off, allows for mounting an optional flex shaft, used to do carving, drum sanding, deburring and dozens of other jobs Deluxe miter gauge that turns and locks for common angles 45 both left and right STOCK NO $ Save $100! JET COMBINATION BELT & DISC FINISHING MACHINE 6 x 48 Belt 10 Disc Two cast iron tilting tables for mitering applications Full access to the belt when tilted in the horizontal position Dust collection shrouds on belt and disc STOCK NO K...$ Stock Number Number J-4002 J Belt Size (in./w x L) 1 x 42 2 x 42 Belt Speed (SFPM) Belt Table Size (in.) 6-1/8 x 7-1/8 10 x 6 Belt and Disc Table Tilt 45 Out 0 to 45 Disc Diameter (in.) 8 8 Disc Speed (RPM) Disc Table Size (in.) 4 x /4 x 7-1/2 Dust Collection Outlet Diameter (in.) 1-1/2 1-1/2 1/3HP, 115V, 1Ph 3/4HP, 1Ph, 115V Machine Dimensions (in./w x D x H) 21 x 22 x /2 x 22-3/4 x 20 Net Weight (lbs.) List Price $ $ Sale Price $ $ Stock Number K Number J-4210K Belt Size (in./w x L) 6 x 48 Belt Speed (SFPM) 1650 Belt Table Size (in./w x L) 6 x 10-1/2 Disc Size (in.) 10 Disc Speed (RPM) 2100 Disc Table Size (in.) 7-1/2 x 13 Table Slots (in.) 5/8 Table Tilt 45 Out 1HP, 115V, 1Ph Net Weight (lbs.) 215 List Price $ Sale Price $ SAWING FINISHING Save $376! JET INDUSTRIAL COMBINATION BELT & DISC FINISHING MACHINES Belt operates at any angle Powered by a heavy-duty, UL/CSA approved, 1-1/2HP TEFC motor Contour, finishing, mitering, flat finishing, beveling and precision Fully machined balanced disc runs vibration free STOCK NO $1, Stock Number Number J-4200A J-4200A-2 J-4202A Belt Size (in./w x L) 6 x 48 6 x 48 6 x 48 Belt Speed (SFPM) Belt Table Size (in.) 7-3/8 x 14-3/4 7-3/8 x 14-3/4 7-3/8 x 14-3/4 Belt Table Tilt 45 Out, 20 Platen 45 Out, 20 Platen 45 Out, 20 Platen Disc Size (in.) Disc Speed (RPM) Disc Table Size (in./w x L) 12 x 16-3/8 12 x 16-3/8 12 x 16-3/8 Disc Table Tilt 45 Out; 20 In 45 Out; 20 In 45 Out; 20 In Miter Gauge Groove (in.) 3/8 x 3/4 3/8 x 3/4 3/8 x 3/4 1-1/2HP, 115V, 1Ph 1-1/2HP, 230V, 1Ph 1-1/2HP, 230V, 3Ph Net Weight (lbs) List Price $1, $1, $1, Sale Price $1, $1, $1,649.00

25 FINISHING Save $400! JET 6" INDUSTRIAL BELT FINISHING MACHINES Table tilts 45 out, and 20 in for all angle finishing operations Adjustable dust deflector and dust chute Completely enclosed drums and guarded sanding belt Fine thread adjustment for simple and easy belt tracking STOCK NO $1, Save $500! JET 2" x 72" Square Wheel Grinder Platen setting is the perfect angle for high speed, precision flat and level grinding For grinding, and refinishing cylindrical shapes. Yoke surface conforms to shape of the surface to produce an even, smooth finish Serrated contact wheel is used for removing heavy stock, cleaning up a weld or snagging a casting STOCK NO $2, Save $500! JET 20" Industrial disc SanderS Direct motor drive Tilting table capability adds flexibility of 45 forward and 15 backward on positive lock rack and gear Table can be lowered below the disc to accommodate large work pieces STOCK NO $1, Save $50! JET INDUSTRIAL BENCH GRINDERS UL listed Totally enclosed, pre-lubricated ball bearings Heavy-duty guarded toggle switch on 8 and 10 Rubber mounts prevent movement STOCK NO $ Save $4! JET PEDESTAL STAND Heavy-duty cast iron construction provides strength and durability Wide stance base gives you a stable grinder workstation. STOCK NO $74 99 Stock Number Numbers J-4300A J-4301A Belt Size (in./w x L) 6 x 48 6 x 48 Belt Speed (SFPM) Table Tilt 45 Out, 20 In 45 Out, 20 In Platen (in.) 7-3/8 x 14-3/4 6-1/4 x 14-3/4 1-1/2HP, 115/230V, 1Ph- Prewired 115V 1-1/2HP, 230V, 3Ph Overall Dimensions (in./w x D x H) 25-1/2 x 19 x 57-1/2 (Width when belt is in horizontal position) 25-1/2 x 19 x 57-1/2 (Width when belt is in horizontal position) Net Weight (lbs.) List Price $1, $1, Sale Price $1, $1, Stock Number Number J-4103 Belt Size (in./w x L) 2 x 72 Kennedy Belt Speed (SFPM) 4600 Roller Cabinet Contact Wheel (in.) 8 Contact Wheel Durometer 70 $599 VALUE Stock Number Number J J Disc Size (in.) Disc Speed (RPM) Table Size (in.) 27-1/2 x 10-1/2 27-1/2 x 10-1/2 Table Slot (in.) 3/8 x 10-1/2 3/8 x 10-1/2 Table Tilt 45 forward, 15 backward 45 forward, 15 backward 3HP, 230V, 3Ph 3HP, 440V, 3Ph Net Weight (lbs.) List Price $2, $2, Sale Price $1, $1, Stock Number JBG-6A JBG-8A JBG-10A Shaft Diameter (in.) 1/2 5/8 1 Wheel Diameter (dia. x W/in.) 6 x 3/4 8 x 1 10 x 1 Wheel Speed (RPM) 3,450 3,450 1,725 Wheel Grits 36/60 36/60 24/46 1/2HP, 1Ph, 115V 1HP, 1Ph, 115V 1-1/2HP, 1Ph,115V Overall Dimensions (L x W x H/in.) 18 x 8-1/2 x 10-1/2 19 x 10 x 12-1/2 24-1/2 x 13 x 12-1/4 Net Weight (lbs.) List Price $ $ $ Sale Price $ $ $ Stock Number JPS-2A Mounting Surface (L x W/in.) 11 x 10 Overall Height (in.) 31 Net Weight (lbs.) 52 List Price $79.00 Sale Price $ HP, 115/230V, 1Ph Net Weight (lbs.) 113 List Price $2, Sale Price $2, MADE IN THE USA METALWORKING OVERHEAD LIFTING WAREHOUSE & DOCK HYDRAULIC & SHOP 25

26 PRICES EFFECTIVE: September 1 - December 31, 2010 INDUSTRIAL overhaul : : SAVINGS EVENT Save $381! JET HYDRAULIC SHOP PRESSES For pressing, bending and straightening operations Easy-to-use, hand-operated with pressure gauge for direct pressure readings Tables raise and lower easily with use of hand crank on the 15-, 35- and 60-ton models Side frames are open for inserting long material Fast setup ram extension screw STOCK NO $ Save $170! JET rotary machine Long throat makes unit highly versatile Performs burring, edging, elbowing, flanging, flattening and turning Adjustable roll pressure by means of top mounted hand crank Can be used in both forward and reverse Operation is smooth, fast and precise Table mount with clamp is standard Six interchangeable rolls with 27/32" I.D. STOCK NO $ Save $30! JET PIPE BENDERS Simple manual operation for ease of use Six bending dies included standard (1/2, 3/4, 1, 1-1/4, 1-1/2, 2 ) Rotating stand locks in three positions for stability and versatility STOCK NO $ Save $76! JET PORTABLE SHEARS Capable of shearing sheet steel, steel bars and rods plus many non-metallic materials Replaceable high quality stainless steel blades are hardened and tempered for maximum service life An adjustable hold down clamp aids in securing material Compound leverage allows the operator to easily perform work within shears rated capacity Includes 35-1/2" handle STOCK NO K...$ Stock Number HP-5A HP-15A HP-35A Capacity (tons) Ram Diameter (in.) 1-3/4 2-1/2 3 Piston Stroke (in.) 4 4-1/2 4-3/4 Screw Stroke (in.) 3 3-1/8 4 Work Table (in.) 19 x 5-1/2 24-3/4 x 7-1/2 31 x 10-3/8 Lateral Movement (in.) /16 15 Vert Table Travel (in.) 15-3/4 22-3/ /8 Auxiliary Hand Press (lbs.) Base Size (in.) 23-1/2 x /8 x 29-1/2 33-1/2 x 42 Height (in.) 51-1/2 65-1/2 68 Net Weight (lbs.) List Price $1, $2, $3, Sale Price $ $1, $2, STOCK NUMBER Number RM-22N Distance Between Shaft Centers (in.) 2 Frame Throat Depth (in.) 7 Overall Dimensions (in./ L x W x H) 18 x 8 x 16 Cutting Capacity (Gauge) 22 Net Weight (lbs.) 64 List Price $ Sale Price $ Stock Number JHPB-20 JHPB-30 Pipe Size 1/2-2 1/2-3 Max. Pipe wall thickness (in.) 1/5 6/25 Maximum Load (Tons) 9 20 Piston Stroke (in.) 10-1/4 12-5/8 Ram Diameter (in.) 1-3/4 2-1/3 Net Weight (lbs.) List Price $ $ Sale Price $ $ STOCK NUMBER K K Number SS-8N SS-12N Sheet Capacity (Mild Steel/in.) 3/16 1/8 Flat Capacity (Mild Steel/in.) 2-3/4 x 1/4 2-3/8 x 5/32 Round Capacity (Mild Steel/in.) 1/2 1/2 Cutting Blade Length (in.) /4 Overall Dimensions (in./ L x W x H) 15 x 6 x x 6 x 17 Net Weight (lbs.) List Price $ $ Sale Price $ $ SAWING FORMING Save $220! JET HAND NOTCHER Made of cast iron Capable of notching virtually any shearable material Can notch angles of more than 90 through a two step process STOCK NO $ Stock Number HN-16N Cutting Capacity (Gauge) 16 Piercing Capacity (Gauge) 18 Maximum Notch (in.) 6X6 Stroke (in.) 3/4 Overall Dimensions (in./l x W x H) 24 x 21 x 26 Net Weight (lbs.) 175 List Price $ Sale Price $ Stock Number Optional Equipment Floor Stand List Price Sale Price S-16N Stand for HN-16N Hand Notcher $ $199.00

27 Save $166! JET COMBINATION SHEAR, BRAKE AND ROLL Combination shear, brake and roll in one compact machine Right or left hand operation STOCK NO $ Stock Number SBR-30N SBR-40N Shearing Capacity (mild steel) (Gauge x in.) 20 x x 40 Bending Capacity (mild steel) (Gauge x in.) 20 x x 40 Rolling Capacity (mild steel) (Gauge x in.) 20 x x 40 Size of Slip Roll (in./l x W) 30 x 1-1/2 40 x 1-5/8 Width of Upper Dies (in.) 1, 2, 3, 6, 8, 10 1, 1-1/2, 2, 2-1/2, 4, 7,10, 15 Upper Die Height (in.) 4-3/8 3-3/8 Net Weight (lbs.) List Price $ $1, Sale Price $ $1, Optional Equipment Floor Stand Stock Number S-30N S-40N List Price $ $ Sale Price $ $ Save $51! JET BENCH & FLOOR MODEL HAND BRAKES Suitable for many types of metal forming operations All body sections are welded steel plate STOCK NO $ Save $49! JET Bench Box and Pan Brakes Incorporates all the features of our standard hand brakes but with greater range of applications With fingers installed it can be used as a full-length nose bar, turning the machine into a straight bending brake STOCK NO $ Save $336! JET FLOOR BOX AND PAN BRAKE Simplicity of design, improved truss rod construction and a minimum number of moving parts make the JET hand brake easy to operate All body sections are welded steel plate with heavy truss rods and braces designed to give greater strength and durability STOCK NO $3, Stock Number HB-2248N HB-1648N HB-1697H Mild Steel Capacity (Gauge) Maximum Lift of Beam (in.) 7/8 1-1/4 2-1/4 Bending Length Capacity (in.) Beam Adjustment (in.front to rear) 1/8 5/8 1 Overall Dimensions (in./l x W x H) 61 x 21 x x 21 x x 31 x 57 Net Weight (lbs) List Price $ $1, $4, Sale Price $ $ $4, Accessories List Price Sale Price Stand for HB-2248N & HB-1648N $ $ Stock Number BP-2248N BP-1648H Mild Steel Capacity (Gauge) Bending Length Capacity (in.) Maximum Box Depth (in.) 3 4 Maximum Lift of Beam (in.) 7/8 1-1/4 Beam Adjustment (in.) 1/8 5/8 Number and Width of Fingers (in.) 5@2, 6@3, 5@4 5@2, 6@3, 5@4 Finger Nose Angle Finger Nose Radius (in.) 1/32 1/32 Overall Dimensions (in./l x W x H) 61 x 21 x x 21 x 30 Net Weight (lbs.) List Price $ $1, Sale Price $ $1, Stock Number Number BP-1248N Mild Steel Capacity (Gauge) 12 Bending Length Capacity (in.) 48 Maximum Box Depth (in.) 4 Maximum Lift of Beam (in.) 1-1/2 Beam Adjustment (in./front to rear) 7/8 Number and Width of Fingers (in.) 5@3, 2@4, 5@5 Finger Nose Angle 45 Finger Nose Radius (in.) 1/32 Overall Dimensions (in./l x W x H) 69-3/4 x 33-1/2 x 52 Net Weight (lbs.) 1477 List Price $3, Sale Price $3, METALWORKING OVERHEAD LIFTING WAREHOUSE & DOCK HYDRAULIC & SHOP 27

28 PRICES EFFECTIVE: September 1 - December 31, 2010 Save $400! JET FOOT SHEARS Ideal for precision shearing of mild steel up to 16 gauge Can also be used on aluminum, brass, copper, lead, plastic and zinc STOCK NO $1, Stock Number FS-1636H FS-1652H Capacity (Mild Steel Gauge) Shearing Length Capacity (in.) Back Gauge Capacity (in.) 25-1/2 25-1/2 Front Gauge Capacity (in.) Overall Dimensions (in./l x W x H) 47-1/4 x 78-1/4 x /2 x 78-1/4 x 41-1/2 Net Weight (lbs.) List Price $1, $2, Sale Price $1, $1, INDUSTRIAL overhaul : : SAVINGS EVENT Save $100! JET 52" PNEUMATIC POWER SHEAR Hi-quality cast-iron grade frame to eliminate deflection across the blade-span and blade framwork Low cutting angle to cut narrow strips without twisting STOCK NO $3, Save $126! JET SLIP ROLLS, BENCH MODELS Suitable for many industrial, educational and vocational shop uses Precision turned carbon steel rolls that are ground and polished Large roll adjusting screws facilitate lifting upper roll for easy material removal STOCK NO $ Stock Number SR-2024N SR-2236N SR-1650N Capacity (Mild Steel Gauge) Max. Forming Length (in.) Number and Diameter of rolls (in.) 3 and 2 3 and 2 3 and 3 Min. Forming Radius (in.) Wire Grooves (in.) 3/16, 1/4, 5/16 3/16, 1/4, 5/16 1/4, 5/16, 3/8 Overall Dimensions (in./l x W x H) 37 x 14-1/2 x 13-3/4 49 x 17 x /2 x 16-1/2 x 19-1/4 Net Weight (lbs.) List Price $ $ $2, Sale Price $ $ $1, Stock Number PS-1652E Overall Dimensions (in./l x W x H): 60 x 24 x 43 Strokes per Minute (Full Length) 40 Air Consumption per Stroke (CFM) 1.3 Air Consumption (CFM) 25.3 Max. Soft Alloy Cutting Capacity (gauge) Max. Mild Steel Cutting Capacity (gauge) 16 Net Weight (lbs.): 1,300 List Price $3, Sale Price $3, Optional Equipment Floor Stand Stock Number S-24N S-36N S-50N List Price $ $ $ Sale Price $ $ $ SAWING FORMING Save $100! JET 50" ELECTRIC SLIP ROLL Valuable machine tool for sheet metal forming in HVAC- and FAB-shops Three-roll machine with two driven rolls. Rolls are made of hardened polished high-carbon steel. STOCK NO $2, Stock Number ESR-1650 Min. Forming Radius (in.) 2 Wire Grooves (in.): 1/4, 5/16, 3/8 Number and Diameter of Rolls: 3 rolls x 3in diameter Mild Steel Capacity (Gauge/in.): 16 Overall Dimensions (in./l x W x H): 67 x 42 x 20 Max. Forming Length (in.): 50 Net Weight (lbs.): 810 List Price $2, Sale Price $2,699.00

29 Save $40! JET 24" PROFESSIONAL PLANISHING HAMMER Smooths beads and forms mild steel sheet metal up to 16 gauge Smooths beads and forms aluminum and copper up to 1/8" thick Machine is supplied with an upper and anvil die set 3-Position airflow regulates speeds of pneumatic hammer Machine controled with 110vac foot control Quick change of upper dies STOCK NO $ Stock Number PH-24 Frame Tube Size (in.) Save $100! JET 45" PROFESSIONAL ENGLISH WHEEL Rolls beads and forms mild steel sheet metal up to 16 gauge Rolls beads and forms aluminum and copper up top 1/8" thick Machine supplied with 10 anvils and 4 rolling wheels Three sets of popular fender groove shaping wheels Screw lift assembly designed for comfortability and precise pressure setup Quick cam handle releases the work piece STOCK NO $1, Stock Number WH-45 Frame Tube Size (in.) 4x4 Throat (in.) 45 Head Opening (in.) 6 Head and Anvil Sit Swivel Rolling Wheels Diameter (in.) 6 Overall Dimension (HxWxD - in.) 4x4 Throat (in.) 24 Head Opening (in.) 2-1/2 Maximum Pressure (psi) 90 Air Consumption (CFM.) Speed Regulator (bits per min.) / / Noise Level (db) Approximate Weight (lbs.) 220 List Price $ Sale Price $ o Approximate Weight (lbs.) x31x58 List Price $1, Sale Price $1, METALWORKING OVERHEAD LIFTING WAREHOUSE & DOCK HYDRAULIC & SHOP 29

30 RAISING TOUGH TO A NEW LEVEL

31

32 PRICES EFFECTIVE: September 1 - December 31, SAWING OVERHEAD LIFTING INDUSTRIAL overhaul : : SAVINGS EVENT From mining, petro-chemical, industrial construction and fabrication, lever hoists are used in some of the most demanding environments in the world. To combat these environments, we have designed and tested our lever hoists to be the best in the industry. Zinc plating on all internal and non-moving parts Drive pinion with phosphate finish to increase corrosion resistance Coating other key components with Dacromet JLH Series Lever Hoists.8T-1.6T NEW SIZE JET JLH SERIES LEVER HOISTS 3/4 ton to 9 ton Capacities Available in 5ft, 10ft, 15ft, and 20ft lifts standard, custom lifts available Light weight, compact design for low head room applications All units feature premium 100 grade chain for extreme wear resistance Patented fused break disc design for low maintenance Caged roller bearings used on load sprocket increase ease of use and efficiency STOCK NO $ Save up to $1, on select JLH hoists! LIFETIME BRAKE WARRANTY Stock Number Rated Capacity (Ton) Standard Lift (FT) List Price Sale Price.8-ton Lever Hoists JLH $ $ JLH $ $ JLH $ $ JLH $ $ ton Lever Hoists JLH $ $ JLH $ $ JLH $ $ JLH $ $ ton Lever Hoists JLH $ $ JLH $ $ JLH $ $ JLH $ $ ton Lever Hoists JLH $ $ JLH $ $ JLH $ $ JLH $ $ ton Lever Hoists JLH $ $ JLH $ $ JLH $ $ JLH $ $ ton Lever Hoists JLH $ $ JLH $1, $ JLH $1, $ JLH $1, $ ton Lever Hoists JLH $1, $1, JLH $2, $1, JLH $2, $1, JLH $2, $1,750.00

33 JET JLP Series Lever Hoists Economical lever hoist designed for years of trouble-free operation 1/4-ton to 6-ton capacities 5, 10, 15 and 20 lifts standard, custom length lifts available All steel construction with a durable powder coat finish Completely enclosed Weston type automatic brake system holds load in any position Easy-to-use with single hand operation and control STOCK NO $ Stock Number Rated Capacity (Ton) Standard Lift (FT) List Price Sale Price 1/4 Ton Lever Hoists JLP /4 5 $ $ /2 Ton Lever Hoists JLP /2 5 $ $ JLP /2 10 $ $ /4 Ton Lever Hoists JLP /4 5 $ $ JLP /4 10 $ $ JLP /4 15 $ $ JLP /4 20 $ $ /2 Ton Lever Hoists JLP /2 5 $ $ JLP /2 10 $ $ JLP /2 15 $ $ JLP /2 20 $ $ Ton Lever Hoists JLP $ $ JLP $ $ JLP $ $ JLP $ $ Ton Lever Hoists JLP $ $ JLP $ $ Save up to $ on select JLP hoists! METALWORKING OVERHEAD LIFTING WAREHOUSE & DOCK HYDRAULIC & SHOP 33

34 PRICES EFFECTIVE: September 1 - December 31, SAWING OVERHEAD LIFTING INDUSTRIAL overhaul : : SAVINGS EVENT JET L-100 SERIES CHAIN HOISTS All steel construction with a durable powder coat finish Lightweight, compact design for low headroom applications triple-spur gears provide high efficiency with minimum effort Heat treated and hardened 100 grade load chain Smooth rolled edge on hand chain cover prevents side pull jamming Dropped forged alloy steel safety hooks feature wide throats for ease of rigging Patented fused disc brakes offer longer life and ease of replacement Sealed ball bearing supported load sheave s with slip clutch overload protection available STOCK NO $ NEW SIZE NEW SIZE Stock Number Rated Capacity (Ton) Standard Lift (FT) List Price Sale Price 1/4-ton Hand Chain Hoists L /4 10 $ $ L /4 15 $ $ L /4 20 $ $ L /4 30 $ $ /2-ton Hand Chain Hoists L /2 10 $ $ L /2 15 $ $ L /2 20 $ $ L /2 30 $ $ ton Hand Chain Hoists L $ $ L $ $ L $ $ L $ $ /2-ton Hand Chain Hoists L /2 10 $ $ L /2 15 $ $ L /2 20 $ $ L /2 30 $ $ ton Hand Chain Hoists L , 2 10 $ $ L $ $ L $ $ L $ $ ton Hand Chain Hoists L $ $ L $1, $ L $1, $ L $1, $ ton Hand Chain Hoists L $1, $ L $1, $ L $1, $1, L $1, $1, ton Hand Chain Hoists L $2, $1, L $3, $2, L $3, $2, ton Hand Chain Hoists L $5, $3, L $5, $3, L $5, $4, ton Hand Chain Hoists L $6, $4, L $7, $4, L $8, $5, Save up to $2, on select L100 hoists! LIFETIME BRAKE WARRANTY

35 JET SMH Series Hand Chain Hoists Full range capacity 1/2- to 10-tons Standard features found only in higher priced models Economical hand chain hoist designed for years of trouble-free service 10, 15, 20 and 30 lifts standard, custom length lifts available All steel construction with a durable powder coat finish Lightweight, compact design for low headroom applications Needle bearing supported load sheave for smooth operation STOCK NO $ Stock Number Rated Capacity (Ton) Standard Lift (FT) List Price Sale Price 1/2-ton Hand Chain Hoists SMH-1/2T-10 1/2 10 $ $ SMH-1/2T-15 1/2 15 $ $ SMH-1/2T-20 1/2 20 $ $ SMH-1/2T-30 1/2 30 $ $ ton Hand Chain Hoists SMH-1T $ $ SMH-1T $ $ SMH-1T $ $ SMH-1T $ $ /2-ton Hand Chain Hoists SMH-1-1/2T /2 10 $ $ SMH-1-1/2T /2 15 $ $ SMH-1-1/2T /2 20 $ $ SMH-1-1/2T /2 30 $ $ ton Hand Chain Hoists SMH-2T $ $ SMH-2T $ $ SMH-2T $ $ SMH-2T $ $ ton Hand Chain Hoists SMH-3T $ $ SMH-3T $ $ SMH-3T $ $ SMH-3T $ $ ton Hand Chain Hoists SMH-5T $ $ SMH-5T $ $ SMH-5T $ $ SMH-5T $ $ ton Hand Chain Hoists SMH-10T $1, $1, SMH-10T $1, $1, SMH-10T $2, $1, SMH-10T $2, $1, Save up to $ on select SMH hoists! LIFETIME METALWORKING OVERHEAD LIFTING WAREHOUSE & DOCK HYDRAULIC & SHOP BRAKE WARRANTY 35

36 PRICES EFFECTIVE: September 1 - December 31, 2010 INDUSTRIAL overhaul : : SAVINGS EVENT 36 OVERHEAD LIFTING SAVE UP TO $156! JET HD SERIES HEAVY DUTY PLAIN TROLLEYS 1/2-ton through 5-ton capacities Multiple spacer washers make beam flange wide adjustment quick and easy Hardened wheels with lubricated for life, double sealed ball bearings For use with wide-flange H-beams, standard I beams or curved track Proof tested with test certificate Complies with OSHA, ANSI/ASME B30.11 and B30.17 standards STOCK NO $56 00 Beam Flange Width (in.) Min. Radius Curve (in.) Ship Weight (lbs.) Stock Number Capacity (ton) Beam Height (ft.) List Price Sale Price /2-HDT 1/2 2-1/ / $78.00 $ HD / $ $ HDT 2 3-1/ / $ $ HDT / $ $ HDT 5 4-5/ / $ $ SAVE UP TO $43! JET HD SERIES HEAVY-DUTY BEAM CLAMPs For construction, commercial and industrial vertical or horizontal rigging operations Mount hoists or lift beams with portable lightweight clamp Adjusts with ease to fit a broad range of wide-flange H or standard I-beams STOCK NO $50 00 Stock Rated Cap y Beam Flange Width Ship Weight List Sale Number (lbs.) (in.) (lbs.) Price Price HBC / /16 10 $72.00 $ HBC / /16 11 $80.00 $ HBC /8-12-5/8 21 $ $ HBC / /8 24 $ $99.00 SAVE UP TO $62! JET JCH Series Linesman pullers Heavy-duty cable puller designed to lift, lower, stretch, or pull heavy loads 1-1/2 and 2-ton capacities available Drop forged hooks with safety latches standard Complies with ANSI/ASME B30.21 standards STOCK NO $ Handle length (in.) Cable Length (ft.) Cable Diameter (in.) Shipping Weight (lbs.) Stock Number Lever Ratio List Price Sale Price General Line Specifications JCH :1 25-1/4 30 1/4 14-1/2 $ $ JCH :1 29-7/8 20 1/4 16 $ $ SAVE UP TO $21! JET JCP Series Cable Pullers General purpose cable puller designed to lift, lower, stretch or pull heavy loads 1-ton to 4-ton capacities STOCK NO $33 00 Lever Length (in.) Min. Distance Between Hooks (in.) Ship Weight (lbs.) Stock Number Capacity (ton) Lever Ratio Maximum Lift (ft.) List Price Sale Price JCP : / $48.00 $ JCP : / $52.00 $ JCP : / $70.00 $49.00 SAVE UP TO $284! JET Heavy-Duty Grip Pullers Industrial quality grip puller designed to lift, lower, or pull heavy loads 3/4-ton to 3-ton capacities Easy-to-use in any direction, angle, or length of pull or lift STOCK NO K...$ Stock Number Description List Price Sale Price K JG-75A, 3/4T Wire Rope Grip Puller with Cable $ $ K JG-150A, 1-1/2T Wire Rope Grip Puller with Cable $ $ K JG-300A, 3T Wire Rope Grip Puller with Cable $ $662.00

37 SAVE $345! JET J Series Pallet Trucks 5,000 pound capacity High quality welded steel construction with a durable powder coat finish 2-1/2 low profile design for smaller size pallet openings STOCK NO $ Stock Number Description Ship Weight (lbs.) List Price Sale Price PT-1636J, 16"x36" Forks 135 $ $ PT-2036J, 20"x36" Forks 204 $ $ PT-2042J, 20"x42" Forks 177 $ $ PT-2048J, 20"x48" Forks 167 $ $ PT-2742J, 27"x42" Forks 204 $ $ PT-2748J, 27"x48" Forks 204 $ $ PRODUCTIVITY THROUGH INNOVATION SAVE $353! JET PTX Series Pallet Trucks 5,500 lb. capacity 2-1/2 lowered height 210 turning radius STOCK NO $ Stock Number Description Ship Weight (lbs.) List Price Sale Price PTX-2048, 20"x48" Pallet Truck 167 $ $ PTX-2748, 20"x48" Pallet Truck 284 $ $ SAVE $362! JET W Series Pallet Trucks 6,000 pound capacity 200º turning radius allows room to maneuver in tight quarters Articulating 7 poly-over-aluminum steer wheels ensure continual contact with uneven floors STOCK NO $ METALWORKING OVERHEAD LIFTING WAREHOUSE & DOCK HYDRAULIC & SHOP Stock Number Ship Weight (lbs.) List Price Sale Price PT-2036W, 20"x36" Forks 190 $ $ PT-2042W, 20"x42" Forks 190 $ $ PT-2048W, 20"x48" Forks 190 $ $ PT-2742W, 27"x42" Pallet Truck 189 $ $ PT-2748W, 27"x48" Pallet Truck 200 $ $

38 PRICES EFFECTIVE: September 1 - December 31, 2010 INDUSTRIAL overhaul : : SAVINGS EVENT SAVE $451! JPH-1000 PANEL HANDLING CART Floor Locks hold cart steady during infeed and outfeed Positive, dual carriage locks at horizontal and vertical positions for added safety 4 swivel casters for easier positioning of cart High strength tubular frame is welded to base for increased strength and reliability STOCK NO $ Sale Stock Number Description Capacity (lbs.) List Price Price JPH-1000 Panel Handler 1000 $1, $ SAVE $78! JET PUC Series heavy-duty Resin service carts Heavy-duty resin construction resists dents, chips, and rust Handle has built in storage bins Round corners mean no sharp edges to nick walls or furniture Large, quiet, non-marking 5 casters STOCK NO $ Stock Max. Cap'y Upper Shelf Lower Shelf Shipping List Sale Number (lbs.) Shelf Size (in.) Height (in.) Height (in.) Weight (lbs) Price Price PUC /8x17-1/8 33-1/ $ $ PUC /8x25-5/8 33-1/ $ $ SAVE $55! JET SC SERIES SERVICE CARTS 3-1/2" deep metal trays are reversible and hold up to 250 pounds each Rugged, metal trays have rolled edge for added strength 14 gauge support brackets; 20 gauge trays 5" hard rubber casters, two swivel, two fixed, for ease in maneuvering STOCK NO $93 00 Stock Number List Price Sale Price SC-2436, 24" x 36" shelves, 500-lb. capacity $ $ WAREHOUSE & DOCK SAVE $24! JET hardwood dollies Use JET hardwood dollies for moving furniture, bulky crates and many other items Kiln dried oak used to prevent warping or shrinkage Countersunk bolt holes to provide a smooth working surface STOCK NO $38 00 Stock Number Description List Price Sale Price WDF-2416, 24" x 16", Open Style Flush End $62.00 $ WDF-3018, 30" x 18", Open Style Flush End $66.00 $ WDS-2416, 24" x 36", Solid Top $78.00 $ WDS-3018, 30" x 18", Solid Top $80.00 $ WDS-3624, 36" x 24", Solid Top $90.00 $ WDC-3018, 30" x 18", Carpet End $58.00 $ WDC-3624, 36" x 24", Carpet End $66.00 $ WDR-3018, 30" x 18", Rubber End $68.00 $42.00

39 SAVE UP TO $297! JET JHJ SERIES HYDRAULIC BOTTLE JACKS For lifting, pushing, spreading, bending, pressing or straightening requirements Not affected by temperature extremes Low profile truck models or standard models Electrically welded base and cylinders to assure strength and eliminate leaks All models work in upright, angle or horizontal position Complies with ANSI/ASME B30.1 and PALD-1 STOCK NO $44 00 Stock Number Description List Price Sale Price JHJ-2, 2 Ton $64.00 $ JHJ-3, 3 Ton $72.00 $ JHJ-5, 5 Ton $94.00 $ JHJ-8, 8 Ton $ $ JHJ-12-1/2, 12-1/2 Ton $ $ K JHJ-12-1/2L, 12-1/2 Ton, Low Profile, (2 pcs) $ $ JHJ-17-1/2, 17-1/2 Ton $ $ K JHJ-17-1/2L, 17-1/2 Ton, Low Profile, (2 pcs) $ $ JHJ-22-1/2, 22-1/2 Ton $ $ K JHJ-22-1/2L, 22-1/2 Ton, Low Profile, (2 pcs) $ $ K JHJ-35, 35 Ton, (2 pcs) $ $ K JHJ-60, 60 Ton, (2 pcs) $ $ SAVE UP TO $77! JET SJ Series Screw Jacks Contractor quality mechanical jack for all-purpose lifts and supports Holds heavy loads indefinitely - will not creep Heavy-duty bell shaped cast base Less effort required to lift capacity load with new design Corrugated steel swivel head turns easily under load Easy to carry and position with built-in handle STOCK NO $33 00 Stock Number SJ-5T SJ-10T SJ-15T SJ-20T SJ-25T Capacity (ton) Screw Size (ODxL) 1 x 6 1-1/2 x 8-3/8 1-5/8 x 10-1/2 2 x /2 x 12 Bar Hole Size (in.) 9/16 11/16 13/16 13/16 13/16 Head Dia. (in.) 2-3/8 3-1/16 3-1/2 4-1/8 4-3/8 Base Size (in.) 4-1/2 5-1/ /8 8 Height Closed (in.) / /2 Net Weight (lbs.) List Price $52.00 $ $ $ $ Sale Price $33.00 $71.00 $82.00 $ $ Stock Number Number Rated Cap y Toe (ton) Toe Ht Min (in) Head Ht Max (in) List Price Sale Price SJTB-1/2 1/2 x 18 SJ-5 3 $8.00 $ SJTB-5/8 5/8 x 24 SJ-10 4 $12.00 $ SJTB-3/4 3/4 x 36 SJ $16.00 $ SJTB-1 3/4 x 42 SJ $38.00 $24.00 SAVE UP TO $87! JET JTJ Series Industrial-Duty Toe Jacks Heavy-duty, industrial quality, dual purpose jack Designed for lifting loads with very low minimum clearances (toe) or high clearances (head) Ideal for house moving, machinery installation and application at shipyard, bridge building or plant construction sites STOCK NO $ Stock Number Number Rated Cap y Toe (ton) Toe Ht Min (in) Toe Ht Max (in.) Head Ht Min (in.) Head Ht Max (in) List Price Sale Price JTJ-2ST 2 5/8 5-1/16 9-3/8 13-3/4 $ $ JTJ-5ST 5 7/8 5-9/ /4 16-1/8 $ $ JTJ-10ST /8 6-13/ /8 18-1/2 $ $ SAVE $33! JET FARM Jack Multi-purpose jack to lift, push, pull, or clamp Rugged steel construction throughout Automatic step-by-step operation for raising and lowering load Large cast iron base for stability Adjustable cast steel top clamp clevis for clamping operations Safety shear pin protects lifting saddle and dropping of load if jack is overloaded Cast steel large and small runners Reversible upright steel bar for long life Bar holes will accommodate chains, cables, etc. Quick disengage with no load STOCK NO $77 00 Stock Number Description List Price Sale Price FJ-3-1/2, 3-1/2 Ton $ $77.00 SAVE UP TO $156! JET HYDRAULIC BODY REPAIR KITS Straighten, bend press or spread steel with 4 ton or 10 ton capacity models Quick connect design allows assembly in seconds Automatic safety overload system protects equipment Heavy wall extension tubes for tough jobs Rugged blow molded case keeps tools organized STOCK NO $ Stock Number Description List Price Sale Price BRK-4A, 4 Ton Capacity, 18-Pc. Set $ $ BRK-10A, 10 Ton Capacity, 17-Pc. Set $ $ METALWORKING OVERHEAD LIFTING WAREHOUSE & DOCK HYDRAULIC & SHOP 39

40 S A V I N G S E V E N T All JET Air Tools on Sale! contact your local dealer for pricing See your local Jet Distributor for details or VISIT JETTOOLS.COM PRICES EFFECTIVE: September 1 - December 31, 2010 OFFER AVAILABLE AT PARTICIPATING DEALERS ONLY WHILE SUPPLIES LAST. Walter Meier (Manufacturing) Inc. reserves the right to correct any pricing, product specifications or image discrepancies Walter Meier (Manufacturing) Inc. All rights Reserved. Printed in the U.S.A. The color WHITE is a registered trademark of Walter Meier (Manufacturing) Inc. STOCK NO K Walter Meier (Manufacturing) Inc. All Rights Reserved. Printed in the U.S.A. Walter Meier (Manufacturing) Inc. Lavergne, TN U.S.A. waltermeier.com