HALLOWELL HI-TECH SHELVING

Size: px

Start display at page:

Download "HALLOWELL HI-TECH SHELVING"

Lewis O’Neal’
6 years ago
Views:

LLOLL I-C SLVING i-ech Industrial grade steel shelving continues a tradition of quality established generations ago with the goal of providing a

Our complete line of shelving is designed and engineered to the highest standards.

1 LLOLL I-C SLVING i-ech Industrial grade steel shelving continues a tradition of quality established generations ago with the goal of providing a shelving line with the strength needed to handle most industrial applications and versatility for today s modern facilities. Our complete line of shelving is designed and engineered to the highest standards. full complement of accessories including full dividers, partial dividers, label holders, swinging doors, post splices for multilevel installations and foot plates are available to complete your system. 48-OU SIPPING FO, N P UNIS 40

LLOLL I-C SLVING i-ech B FON POSS Beaded for strength Flush to permit straight-in/straight-out shelf installation, shelf changing and shelf loading.

angle shape for maximum strength he long leg is punched on 1-1/2" centers to allow independent shelf adjustment ngle Posts can be used in place of Beaded Front Posts if desired i-ech -POSS

requires four of these sturdy and compact clips Clips key snugly into post slots to hold shelves securely in place Fits both Beaded Front and ngle Back Posts as well as -Posts Provides

bend side flanges for added strength Lapped and welded corners op of shelf is punched to accept shelf dividers Uses four one piece shelf clips per shelf Can be installed together with both

2 LLOLL I-C SLVING i-ech B FON POSS Beaded for strength Flush to permit straight-in/straight-out shelf installation, shelf changing and shelf loading. No tilting needed Get the full use of shelf area Punched on 1-1/2" centers to allow positioning of one shelf independent of other shelves i-ech NGL BCK POSS N -POSS oll formed into a unique angle shape for maximum strength he long leg is punched on 1-1/2" centers to allow independent shelf adjustment ngle Posts can be used in place of Beaded Front Posts if desired i-ech -POSS (Non-Stock Item) esigned for high-density applications More than twice the capacity of standard posts Used at front and back Used with standard i-ech components i-ech ON PIC SLF CLIP ach shelf requires four of these sturdy and compact clips Clips key snugly into post slots to hold shelves securely in place Fits both Beaded Front and ngle Back Posts as well as -Posts Provides independent shelf positioning on 1-1/2" centers Non-Intrusive clip sits flush with inside edge of front posts i-ech VY UY SLVS ubular flange front and rear for greater strength xclusive triple bend side flanges for added strength Lapped and welded corners op of shelf is punched to accept shelf dividers Uses four one piece shelf clips per shelf Can be installed together with both Beaded Front and ngle Back Posts as well as -Posts and -Posts ll units shown on pages 42 thru 44 include allowell eavy-uty shelves with capacities as noted. Standard-uty and xtra heavy-uty units are in stock. Consult factory for availability. 48-OU SIPPING FO, N P UNIS 41

3 LLOLL I-C SLVING I X 87 IG UNIS OPN YP S M OL # 5 S LVS - M OL S LVS - M OL 5511 S S M OL # S S LVS - M OL M OL # 8 S LVS - M OL 5513 NOS: 42 C PCIY M OL # CLOS YP S OPN YP M OL # P S LF S S LVS - M OL C PCIY M OL # P S LF S S LVS - M OL C PCIY M OL # P S LF S S LVS - M OL C PCIY S S LVS - M OL 5523 C PCIY M OL # P S LF CLOS YP P S LF C PCIY P S LF C PCIY P S LF C PCIY S P S LF Color for all components 725 allowell Gray Open units: Starter units include two beaded front posts, two angle back posts, one pair back sway braces, two pair side sway braces and 5-8 shelves. dder units include one beaded front posts, two angle back posts, one pair back sway braces, one pair side sway braces and 5-8 shelves. Closed units:starter units include two beaded front posts, two angle back posts, one back panel, two side panels and 5-8 shelves. dder units include one beaded front posts, two angle back posts, one back panel, one side panel and 5-8 shelves.

4 LLOLL I-C SLVING I X 87 IG UNIS OPN YP S M OL # S S LVS - M OL M OL # S S LVS - M OL SLVS M OL # S S LVS - M OL M OL # S S LVS - M OL NOS: CLOS YP S OPN YP C PCIY CLOS YP M OL # P S LF 5 S LVS - M OL 5620 C PCIY S S S S M OL # P S LF 6 S LVS - M OL 5621 C PCIY M OL # P S LF 7 S LVS - M OL 5622 C PCIY M OL # P S LF 8 S LVS - M OL 5623 C PCIY P S LF C PCIY P S LF C PCIY P S LF C PCIY P S LF Color for all components 725 allowell Gray Open units: Starter units include two beaded front posts, two angle back posts, one pair back sway braces, two pair side sway braces and 5-8 shelves.dder units include one beaded front posts, two angle back posts, one pair back sway braces, one pair side sway braces and 5-8 shelves. Closed units: Starter units include two beaded front posts, two angle back posts, one back panel, two side panels and 5-8 shelves. dder units include one beaded front posts, two angle back posts, one back panel, one side panel and 5-8 shelves. 43

5 LLOLL I-C SLVING I X 84 IG UNIS OPN YP S M OL # S S LVS - M OL M OL # S S LVS - M OL M OL # 7 S LVS - M OL M OL # S S LVS - M OL NOS: 44 C PCIY S SLVS OPN YP P S LF C PCIY P S LF C PCIY P S LF C PCIY P S LF CLOS YP S M OL # S S LVS - M OL M OL # S S LVS - M OL M OL # S S LVS - M OL M OL # S S LVS - M OL CLOS YP C PCIY P S LF C PCIY P S LF C PCIY P S LF C PCIY P S LF Color for all components 725 allowell Gray Open units: Starter units include two beaded front posts, two angle back posts, one pair back sway braces, two pair side sway braces and 5-8 shelves. dder units include one beaded front posts, two angle back posts, one pair back sway braces, one pair side sway braces and 5-8 shelves. Closed units: Starter units include two beaded front posts, two angle back posts, one back panel, two side panels and 5-8 shelves. dder units include one beaded front posts, two angle back posts, one back panel, one side panel and 5-8 shelves.

6 LLOLL I-C SLVING SPCIFICIONS Beaded Front Posts: Fabricated from 14 gauge cold rolled steel and roll formed into an 11/16" wide x 2-9/16" deep tubular section. ear flanges are welded on 6" centers to provide maximum strength. Sides of the post are punched 1-1/2" on center with 3/8" x 7/8" rectangular slots to receive shelf clip. ear flanges of the post have holes punched on 3" centers for the attachment of side sway braces or field attached solid side panels. Provide (1) Beaded Front Post between each adjoining section and at row ends. ngle Back Posts: Fabricated of 14 gauge cold rolled steel and roll formed into a modified unequal angle shape. he long leg shall have holes punched on 1-1/2" centers with 3/8" x 7/8" rectangular slots to receive shelf clip. he leading edge shall have holes punched on 3" centers for the attachment of side sway braces. he short leg shall have holes punched on 3 centers for the attachment of back sway braces or back panels. Provide (1) ngle Back Post at each row end for open-type shelving applications. -Posts: Shall be fabricated of two angle back posts. he posts are welded together back-to-back to form a "". elds are on 6" centers for maximum strength. Posts are used for intermediate back post applications. Provide (1) Post between each adjoining section for open-type shelving applications. Shelves eavy uty: Formed with two ribs along the horizontal front and rear edge and are stamped on the top left corner for identification. Class 1 shelves are fabricated from heavy gauge cold rolled steel and have roll formed rectangular tubular shaped front and rear edges with return bends resistance welded to the under side of shelf. elds are spaced 3" on center to provide maximum strength. Sides are triple flanged to form a channel. ll four corners are lapped and resistance welded to provide a rigid corner and add extra strength to the shelf. op surface shall be punched for attaching Shelf ividers from left to right on 1-1/2" centers, front and back, for 36" wide x 12", 15", 18" and 24" deep shelves. ll other sizes are punched on 3" centers. Front and rear surfaces are punched for attaching accessories. ubular front edge is designed to protect against impact loads. Used for uniformly distributed loads up to pounds. Shelf Clips: Shall be a one piece compression clip drawn from 13 gauge cold rolled steel and zinc plated. Fits snugly against side of post to hold shelves in place. Provide four per shelf. Side Sway Braces: 1" x 11 gauge cold rolled steel strip with safety edges to eliminate sharpness. he center of two identical pieces shall be punched to be bolted together forming an "X". nds shall be radiused and punched for attaching to front and back posts. Provide between adjoining sections and at row ends for open-type shelving applications. Back Sway Braces: 1" x 11 gauge cold rolled steel strip with safety edges to eliminate sharpness. he center of two identical pieces shall be punched to be bolted together forming an "X". nds shall be radiused and punched for attaching to two back posts. Provide at back of all open-type shelving applications. Side Panels: Fabricated from 24 gauge cold rolled sheet steel. he full height panel is field bolted to front and back posts. Provide at all side locations for closed-type shelving sections. Back Panels: Fabricated from 24 gauge cold rolled sheet steel. he two outer edges and the center shall be punched with 5/16" diameter holes on 1" centers running vertically for assembling to back posts. he center row is used to attach to rear of shelf using Back Clips. Provide at back of closed-type shelving sections. Foot Plates: 2-1/4" x 3-1/2" x 12 gauge steel plate with angle bracket welded on top. he angle bracket is punched for fastening to front and back posts. he plate shall have a 7/16" diameter hole punched on one end for floor anchoring and be embossed on the other end for Shim Plate alignment. Provide as required for floor anchoring or when shimming is required for a level installation. Shim Plates: 2-1/4" x 3-1/2" x 16 gauge cold rolled sheet steel. Fabricated to fit under the Foot Plate. One end is embossed to fit into the embossment in the Foot Plate to keep them properly aligned. he other end shall have a 7/16" diameter hole to allow floor anchoring. Provide as required when shimming is required for a level installation. NO: ll units shown on pages 42 thru 44 include allowell heavy-duty shelves with capacities up to lbs/shelf. Standard-duty units with capacities up to lbs/shelf and extra heavy-duty units with capacities up to 1200 lbs/shelf are also available from stock. 48-OU SIPPING FO, N P UNIS 45

Shelving for picking STORAGE TECHNOLOGIES & MATERIAL HANDLING

Shelving for picking STORAGE TECHNOLOGIES & MATERIAL HANDLING M7 Shelving for picking General features - Storage system for manual picking of products following the man-to-goods principle - Possibility of storing medium to heavy loads - Easy assembly - Gauging between