MULTI-AXIS CNC MACHINING & GEAR FACILITY AUCTION CONDUCTED BY:

Transcription

1 PUBLIC AUCTION MCCOY GLOBAL CANADA Thursday, December 14, :30 A.M. MST A Avenue NW, Edmonton, Alberta, T5L 5H2 INSPECTION: Wednesday, December 13 from 9:00 A.M. to 5:00 P.M. & morning of auction to start of auction. ONSITE & ONLINE MULTI-AXIS CNC MACHINING & GEAR FACILITY AUCTION CONDUCTED BY: 74 Berkeley Street, Toronto, Ontario, Canada M5A 2W

2 ALL ASSETS HAVE BEEN EXCEPTIONALLY MAINTAINED STATION HEAD CHANGER View of FANUC Oi-TC CNC control VIPER VTL-16/20 CNC vertical live milling & turning center View of jaw chuck TRAVELS: X-120, Y-63, Z-31.5 TOYODA WELE SB-316 CNC bridge type vertical machining center TRAVELS: X-87.8, Y-63, Z KAO MING KMC-2000SD CNC bridge type vertical machining center VIPER CNC VERTICAL TURNING & LIVE MILLING CENTER VIPER (2008) VTL-16/20 CNC vertical turning & live milling center with FANUC Oi-TC CNC control, diameter 4-jaw chuck, max turning diameter, max turning height, live milling, 12 station head changer, #50 taper, 50 hp spindle drive, HABOR chiller, coolant, chip conveyor, s/n CNC BRIDGE TYPE VERTICAL MACHINING CENTERS TOYODA WELE (2012) SB-316 CNC bridge type vertical machining center with FANUC SERIES 31i-MODEL B CNC control, 118 x 59 table, 22,000 LBS max table load capacity, travels X-120.5, Y-63.00, Z-31.50, max distance spindle nose to table top, max distance between columns, speeds to 6000 RPM, 35 HP spindle drive, 60 station ATC, CAT 50 taper, RENISHAW OMI2 probe system, coolant, dual chip augers, chip conveyor, fourth axis ready, s/n KAO MING (2005) KMC-2000SD CNC bridge type vertical machining center with FANUC SERIES 18-M CNC control, x table, 84 x 66 sub table, 13,000 LBS max table load capacity, travels X-87.80, Y-63.00, Z-27.56, max distance spindle nose to table top, max distance between columns, speeds to 5200 RPM, 35 HP spindle drive, 60 station ATC, CAT 50 taper, coolant, dual chip augers, chip conveyor, s/n M CONTACT TO CONSIGN EQUIPMENT AT AN UPCOMING AUCTION

3 CNC GEAR, TURNING & MACHINING ASSETS AVAILABLE 2013 WE BUY & SELL YOUR SURPLUS MACHINERY MIDACO PALLET CHANGER HURCO VMX64i/50T twin pallet CNC vertical machining center ONE MACHINE OR ENTIRE PLANTS, WE HAVE OVER 60 YEARS EXPERIENCE TO SELL YOUR EQUIPMENT AT FAIR MARKET VALUE. CONTACT US TODAY TO LEARN MORE! O.E.M CNC REMANUFACTURED LOW HOURS FELLOWS-BOURN & KOCH TYPE 36 3-axis CNC gear shaper HAAS UMC axis CNC vertical machining center QTY OF TOOLING AVAILABLE FELLOWS-BOURN & KOCH HS axis CNC gear shaper CNC VERTICAL MACHINING CENTERS HURCO (2013) VMX64i/50T twin pallet CNC vertical machining center with HURCO WINMAX MILL V ST CNC touch screen control, 35 x 66 table, 6,000 lbs table load capacity, travels X-64 Y-34 Z-30, 36 max distance spindle nose to table top, speeds to 8,000 RPM, CAT 50 taper, 30 HP spindle drive, high pressure coolant through spindle, 32 station ATC, MIDACO SERIES A60SD twin station APC with 31.5 x pallets, MITSUBISHI touch screen control and integration, BRADCO chip conveyor, ROYAL FILTERMIST fume extractor, s/n H HAAS () VF-6/50 CNC vertical machining center with HAAS CNC control, 64 x 28 table, 4,000 lbs table load capacity, travels X-64 Y-32 Z-20, speeds to 7,500 RPM, CAT 50 taper, 30 HP spindle drive, coolant through spindle, 30 station ATC, chip auger, fourth axis ready 5-AXIS CNC VERTICAL MACHINING CENTER HAAS (2014) UMC axis CNC vertical machining center with HAAS CNC control, 19.7 diameter table, 660 lbs max table load capacity, travels X-30, Y-20, Z-20, B +110/-35 degrees tilt, C-360 degrees rotation, 24 max distance spindle nose to table top, speeds to 8,000 RPM, CAT 40 taper, 30 HP spindle drive, 40 station ATC, coolant through spindle, RENISHAW touch probe system, chip conveyor, s/n TO SCHEDULE AN AUCTION CONTACT

4 MAKE USE OF YEAR END CAPITAL SPENDING BUDGETS! 2013 HURCO VMX50i 4-axis CNC vertical machining centers 2 AVAILABLE 2004 HAAS VF-6/50 4-axis CNC vertical machining center HAAS VF-6/50 4-axis CNC vertical machining center HYUNDAI-KIA SKT-460 CNC turning center X 62 CAPACITY CNC VERTICAL MACHINING CENTER HURCO (2013) VMX50i 4-axis CNC vertical machining center with HURCO WINMAX MILL V ST CNC touch screen control, 59 x 26 table, 3,300 lbs table load capacity, travels X-50 Y-26 Z-24, optional high torque spindle package with speeds to 6,500 RPM, CAT 50 taper, 24 HP spindle drive, high pressure coolant through spindle, 30 station ATC, chip conveyor, HURCO HSC- 9C 9 fourth axis CNC rotary table with 2.75 bore and tailstock (may be sold separately), s/n H THIS BROCHURE IS ONLY A PARTIAL LISTING. PLEASE VISIT OUR WEBSIT

5 CNC FLOW WATERJET, HYUNDAI-KIA TURNING CENTERS & MORE! 2012 FLOW MACH3 3020B CNC waterjet X 28.3 CAPACITY HYUNDAI-KIA SKT-300 CNC turning center 2 AVAILABLE HYUNDAI-KIA SKT-25 CNC turning center 60,000 PSI CNC TURNING CENTERS HYUNDAI-KIA () SKT-460 CNC turning center with FANUC 21i-TB CNC control, swing, max turning diameter, max turning length, travels X Z-62.00, 5.11 spindle bore, 24 3-jaw hydraulic chuck, speeds to 2000 RPM, HP spindle drive, 12 station turret, hydraulic tailstock, coolant, tool checker probe, chip conveyor, s/n SKT HYUNDAI-KIA (2005) SKT-300 CNC turning center with FANUC Oi-TC CNC control, swing, max turning diameter, max turning length, travels X Z-29.50, 4.01 spindle bore, KITAGAWA 15 3-jaw hydraulic chuck, speeds to 3000 RPM, HP spindle drive, 12 station turret, hydraulic tailstock, coolant, tool checker probe, chip conveyor, s/n SKT HYUNDAI-KIA () SKT-25 CNC turning center with FANUC Oi-TC CNC control, swing, max turning diameter, max turning length, travels X-9.84 Z-29.50, 3.5 spindle bore, KITAGAWA 12 3-jaw hydraulic chuck, speeds to 3600 RPM, HP spindle drive, 12 station turret, hydraulic tailstock, coolant, tool checker probe, chip conveyor, s/n SKT HYUNDAI-KIA () SKT-25 CNC turning center with FANUC Oi-TC CNC control, swing, max turning diameter, max turning length, travels X-9.84 Z-29.50, 3.5 spindle bore, KITAGAWA 12 3-jaw hydraulic chuck, speeds to 3600 RPM, HP spindle drive, 12 station turret, hydraulic tailstock, coolant, tool checker probe, chip conveyor, s/n SKT E FOR MORE DETAILED LISTINGS AND PHOTOS. 5

6 CAN T ATTEND IN PERSON? BID ONLINE AT HYD-MECH V18 SERIES II semi automatic tilting frame vertical band saw 2011/RECERTIFIED O.E.M 2014 FARO FAROARM EDGE portable CMM HYDRAULIC BUNDLING HYD-MECH H14A automatic dual post horizontal band saw 21 X 80 CAPACITY ROYAL S2180G gap bed engine lathe TARNOW TUR-630M engine lathe 6 CONTACT TO CONSIGN EQUIPMENT AT AN UPCOMING AUCTION

7 PLEASE MARK YOUR CALENDARS & WE LL SEE YOU AT THE SALE! CNC WATERJET TABLE FLOW (2012) MACH3 3020B 6x12 integrated flying bridge cantilever type CNC water jet cutting table with FLOWMASTER PC based CNC control, 100 x137 x36 catcher tank, 87 x125 table, FLOW MS-2258 HYPLEX intensifier pump with 55,000 PSI output pressure, 60,000 PSI max pressure, 50 HP motor, PHASER ECL cutting heads, s/n PORTABLE CMM LIVE MILLING GILDEMEISTER CTX 500 SERIES 2 CNC live milling and turning center 2008 FARO (2011/RECERTIFIED O.E.M 2014) FAROARM EDGE portable CMM set with FARO CAM2 Q MEASURE 10 measuring software on DELL laptop PC with dongle, probe, calibration sphere, FARO optional optical laser scanning attachment, FARO folding tripod with case, travel case & documentation, s/n E WHEELABRATOR rotary tumblast shot blast system 2 AVAILABLE SUMMIT 3UH universal milling machine CNC GEAR SHAPERS FELLOWS-BOURN & KOCH () HS axis CNC gear shaper with FANUC SERIES 300i MODEL A CNC control, 27 table, swing, SPM, max external diameter, 25 max internal diameter, (6) CNC controlled axes, coolant, magnetic chip conveyor, approx 5800 cutting hours recorded on meter at the time of listing, s/n H FELLOWS-BOURN & KOCH (2008 O.E.M CNC REMANUFACTURED) TYPE 36 3-axis CNC gear shaper with FANUC POWER MATE CNC control, 36 table, swing, SPM, max external diameter, max internal diameter, 45 degrees max helix angle, (3) CNC controlled axes, approx 180 cutting hours recorded on meter at the time of listing, coolant, s/n AUTOMATIC BAND SAWS 2 AVAILABLE MODERN TF-1300H radial arm drill KAO MING KMR-700 DS 32 radial arm drill HYD-MECH () H14A automatic dual post horizontal band saw with digital microprocessor control, 14 x14 max cutting capacity, 1.25 X168 blade, hydraulic feed, hydraulic shuttle vise, coolant, roller conveyor, s/n HYD-MECH V18 SERIES II semi automatic tilting frame vertical band saw with 18 x 31 max cutting capacity, +/- 45 degrees miter capability, 6 degree canting head, 34.5 x table, 18 throat, 7.5 HP, coolant, s/n J TO SCHEDULE AN AUCTION CONTACT

8 MCCOY GLOBAL CANADA Thursday, December 14 Edmonton, AB, Canada UPRIGHT MX19 electric scissor lift 2011 POWERSTAR PIONEER ECLIPSE 21 LPG walk behind power scrubber 5+ AVAILABLE MECHANICS EDGE stainless steel rolling tool box & chest combination 15+ AVAILABLE Partial view of hydraulic vises available Partial view of CAT 50 & CAT 40 tool holders 3 AVAILABLE MICRO AIR portable welding fume extractor FEATURING: WHEELABRATOR BCP (REBUILT ADS-SHOTBLAST) A rotary tumblast shot blast machine with 15 cu/ft capacity, 35 HP single wheel, rubber belt, dust collector with media recovery, s/n 1288; McCOY CUSTOM freestanding gantry crane system with underslung 1.5 TON capacity overhead bridge with JET 3,000 LBS cap electric chain hoist, approx 25 span, 36 runway, 13.5 height under the hook, all bolted construction, s/n n/a; ALSO: LRG QTY of precision tooling, CAT 50 holders, MILLER MIG & TIG welders, gear cutters, machine vises, assortment of adjustable cantilever racking, fireproof cabinets, LISTA cabinets, carbide inserts & tooling, fume extractors, general plant support equipment & MUCH MORE! THIS IS A PARTIAL LISTING ONLY! FOR FURTHER INFORMATION, PLEASE VISIT AUCTION DETAILS ONSITE & ONLINE SALE HELD PROUDLY IN CONJUNCTION WITH: INSPECTION Wednesday, December 13 from 9:00 A.M. to 5:00 P.M. and morning of auction to start of auction. PAYMENT A Buyer s Premium will apply at this sale. International & online bidders may need a refundable deposit to bid. REMOVAL Small items: Thursday, December 15 by 5:00 P.M. Remaining items: Thursday, December 28 by 5:00 P.M. TERMS Corporate Assets Inc. assumes no liability for errors or omissions in this brochure. Corporate Assets Inc. expressly reserves the right to determine the manner of conducting the auction as it may deem appropriate. All subject to prior sale. AFFILIATIONS Please refer to our website at or call for further information. Pour les services en français, composez le We Accept Please visit our website as specific terms and conditions may apply. BID ONLINE AT: 2017 CORPORATE ASSETS INC. ALL RIGHTS RESERVED. ASSET SALES, INC. 163 Associates Lane Indian Trail, NC SUBSCRIBE TO OUR NEWSLETTER AND GET THE LATEST AUCTION UPDATES corpassets.com/newsletter-signup