Media Fireplace Console Stock # MFC-23
|
|
- Phoebe Lamb
- 6 years ago
- Views:
Transcription
1 LOT NUMBER: DATE PURCHASED: / / Media Fireplace Console Stock # MFC- ADULT ASSEMBLY AND SET-UP REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased. Please call our customer service number and have your instructions and parts list ready to provide the model name, part name or factory number: Pacific Standard Time: 8:0 a.m. - 4:0 p.m., Monday - Friday Or visit our web site 4 hours a day, 7 days a week for product assistance at Or your request to parts@whalenfurniture.com THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Whalen Furniture Mfg., Inc. Page Factory No. 468 Date Rev. Factory: SFOFUR
2 QUALITY GUARANTEE Stock # MFC- We are confident that you will be delighted with your Whalen Furniture purchase. Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace it for up to one () year from date of purchase. Every Whalen Furniture product is designed to meet your highest expectations. We guarantee that you will immediately see the value of our fine furniture. This warranty gives you specific legal rights and you may also have other rights which vary from State to State. Customer Service: :0 a.m. - 4:0 p.m., PST, Monday to Friday MAXIMUM RECOMMENDED WEIGHT LOADS MANUFACTURER: Whalen Furniture Mfg., Inc. CATALOG: Media Fireplace Console (MFC-) DATE OF MANUFACTURE: August 04 MADE IN CHINA FITS UP TO MOST 45 FLAT PANEL TVs MAXIMUM LOAD 00 lb. (45. kg) PLACE TV BEHIND THE STOPPER MAXIMUM LOAD 50 lb. (.6 kg) THIS UNIT IS NOT INTENDED FOR USE WITH CRT TVS. USE ONLY WITH FLAT PANEL TVS AND AUDIO/VIDEO EQUIPMENT MEETING RECOMMENDED SIZE AND WEIGHT LIMITS. NEVER USE WITH LARGER/HEAVIER THAN RECOMMENDED FLAT PANEL TVS OR EQUIPMENT. TO AVOID INSTABILITY, PLACE FLAT PANEL TV IN THE CENTRE OF THE UNIT; DO NOT ALLOW TV TO OVERHANG UNIT IN ANY DIMENSION. IMPROPERLY POSITIONED FLAT PANEL TVS, OR FLAT PANEL TVS OR OTHER EQUIPMENT THAT EXCEED RECOMMENDED SIZE AND WEIGHT LIMITS COULD FALL OFF OR BREAK THE UNIT, CAUSING POSSIBLE SERIOUS INJURY. Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page Factory No. 468
3 Important Stock # MFC- Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and nonabrasive surface. You will need the parts identified on page 4 and 5 of this instruction manual. NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED OFF WITH DAMP CLOTH. Insert the Dowel at least half way by tapping lightly with a rubber mallet, IF NECESSARY. 4 X X FINAL CAM LOCK SYSTEM OPERATION HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS. Screw the Cam Bolt into the threaded inserts on the panel. Connect both panels together; making sure Cam Bolt goes into the pre-drilled hole on the end of panel for Cam Lock.. Insert the Cam Lock into the pre-drilled large hole on the panel. Make sure the arrow on the face of Cam Lock faces out and points towards Cam Bolt.. Take a Phillips screwdriver and rotate the Cam Lock clockwise to lock the Cam Bolt in place. 4. Plug the Cam Lock Cover into the cross slot of the Cam Lock to conceal the Cam. You are now ready to assemble the KD unit. Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page Factory No. 468
4 Parts and Hardware List Stock # MFC- Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. A- Top Panel () B- Left Upper Side Panel () C- Right Upper Side Panel () D- Left Upper Front Panel () E- Right Upper Front Panel () F- Center Shelf () G- Left Lower Side Panel () H- Right Lower Side Panel () I- Left Lower Front Panel () J- Right Lower Front Panel () K- Center Front Molding () L- Bottom Panel () M- Back Bottom Stretcher () N- Front Bottom Stretcher () O- Front Bottom Molding () P- Side Molding () Q- Back Panel () Fireplace Insert () Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 4 Factory No. 468
5 Parts and Hardware List Stock # MFC- Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. () Cam Lock () Cam Bolt () M8 x 0 mm Wood Dowel (4) M6 x 0 mm Wood Dowel (9+ extra) (9+ extra) (0+ extra) (8+ extra) (5) #6 x mm Screw (6) #8 x 8 mm Screw (7) #0 x 5 mm Screw (8) #0 x 50 mm Wood Screw (4+ extra) (4+ extra) (6+ extra) (0+ extra) (9) Acrylic Stopper (0) Ø x 4 mm Washer Head Screw () Cam Lock Cover () (6+ extra) (8+ extra) () Metal Bracket () () Floor Protector (6+ extra) Glue () Touch-up Pen () Tipping Restraint Hardware Kit () (Included in plastic bag) Tools required: Phillips screwdriver and Rubber Mallet (not provided). Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 5 Factory No. 468
6 Stock # MFC- A A/F/L F L Cam Bolt ( used in this step). Unpack the unit and confirm that you have all the hardware and required parts. Assembly the unit on a carpeted floor or the empty carton to avoid any scratch.. Locate the Top Panel (A), Center Shelf (F) and Bottom Panel (L) with the holes facing up. Securely screw the Cam Bolts () into the designated small holes by a Phillips screwdriver. As shown above. Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 6 Factory No. 468
7 Stock # MFC- 7 7 G 4 P G Cam Bolt ( used in this step) M6 x 0 mm Wood Dowel ( used in this step) 4 #0 x 5 mm Screw (4 used in this step) 7. Insert two M6 x 0 mm Wood Dowels (4) into the middle holes of one Side Molding (P). Tap in with a rubber mallet, if necessary. Make sure that you use a small amount of glue with both ends of all dowels. NOTE: It is very important to use a small amount of glue on both ends of dowels. 4. Align and attach the Side Molding (P) to the Left Lower Side Panel (G) with four 5 mm Screws (7). Tighten the screws by a Phillips screwdriver. Make sure that the bottom edges are flush with each other. 5. Securely screw three Cam Bolts () into the designated small holes on the Left Lower Side Panel (G), as shown. Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 7 Factory No. 468
8 Stock # MFC- 7 H 7 4 P H Cam Bolt ( used in this step) M6 x 0 mm Wood Dowel ( used in this step) 4 #0 x 5 mm Screw (4 used in this step) 7 6. Repeat the same procedure to combine the Right Lower Side Panel (H) and the other Side Molding (P) together. 7. Securely screw three Cam Bolts () into the designated small holes on the Right Lower Side Panel (H). As shown. Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 8 Factory No. 468
9 Stock # MFC- I I G Cam Lock ( used in this step) Cam Bolt ( used in this step) M8 x 0 mm Wood Dowel ( used in this step) 8. Securely screw three Cam Bolts () into the designated small holes on Left Lower Front Panel (I), as shown. 9. Insert two M8 x 0 mm Wood Dowels () into the inner end holes of the Left Lower Side Panel (G). 0. Align the drilled holes on the Left Lower Front Panel (I) with the inserted Wood Dowels () on the Left Lower Side Panel (G) and then press them together. Attach the Left Lower Front Panel (I) in place by engaging three Cam Locks () (Refer to page on Cam Lock system operation supplement). As shown. Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 9 Factory No. 468
10 Stock # MFC- J J H Cam Lock ( used in this step) Cam Bolt ( used in this step) M8 x 0 mm Wood Dowel ( used in this step). Repeat the same procedure to combine the Right Lower Front Panel (J) and Right Lower Side Panel (H) together. Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 0 Factory No. 468
11 Stock # MFC- M L Cam Lock ( used in this step) M8 x 0 mm Wood Dowel ( used in this step). Align and attach the Back Bottom Stretcher (M) to the Bottom Panel (L) by using two M8 x 0 mm Wood Dowels () and three Cam Locks (). As shown. Make sure the Cam Locks face inward. Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page Factory No. 468
12 Stock # MFC- I G M L J H Cam Lock (6 used in this step) M8 x 0 mm Wood Dowel (6 used in this step). Insert six M8 x 0 mm Wood Dowels () into the end holes of the Bottom Panel (L) and Back Bottom Stretcher (M) at both ends. As shown. DO NOT insert the wood dowels into the cam bolt holes. 4. Align the large holes on the Left Side Panel (G) with the inserted Wood Dowels () on last assembly and press them together. Attach the Left Side Panel (G) in place by engaging three Cam Locks (). As shown. 5. Repeat the same process to attach the assembled Right Side Panel (H) at the opposite end. Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page Factory No. 468
13 Stock # MFC- I 8 L J M 8 H #0 x 50 mm Wood Screw (4 used in this step) 8 6. Insert four 50 mm Wood Screws (8) through the countersunk holes underneath the Bottom Panel (L) and securely screw into the Lower Front Panels (I and J) by a Phillips screwdriver, as shown above. Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page Factory No. 468
14 Stock # MFC- I N L J H Cam Lock ( used in this step) M8 x 0 mm Wood Dowel ( used in this step) 7. Align and attach the Front Bottom Stretcher (N) to the Bottom Panel (L) by using two M8 x 0 mm Wood Dowels () and three Cam Locks (). As shown. Make sure that the Cam Locks face inward. Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 4 Factory No. 468
15 Stock # MFC- 6 I G N 6 J H #8 x 8 mm Wood Screw (4 used in this step) 6 8. Insert four 8 mm Wood Screws (6) through the countersunk holes on the Front Bottom Stretcher (N) and securely screw into the Lower Side Panels (G and H) by a Phillips screwdriver. As shown. Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 5 Factory No. 468
16 Stock # MFC- 4 4 O 7 N M6 x 0 mm Wood Dowel (4 used in this step) 4 #0 x 5 mm Screw (8 used in this step) 7 9. Fasten the Front Bottom Molding (O) to the Front Bottom Stretcher (N) by using four M6 x 0 mm Wood Dowels (4) and eight 5 mm Screws (7). As shown. Make sure that the bottom edges are flush with each other. Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 6 Factory No. 468
17 Stock # MFC- 0 MM I G 5 MM O N 0 MM J M H 5 MM Floor Protector (6 used in this step) 0. Gently tap six Floor Protectors () onto the bottom of Side Panels (G and H) and the Bottom Stretchers (M and N) as proper size. Make sure the Floor Protectors rest on the center of panels for avoiding any damage or crack.. Stand the assembled unit upright. Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 7 Factory No. 468
18 Stock # MFC- D E D E B C Cam Lock (4 used in this step) Cam Bolt (4 used in this step) M8 x 0 mm Wood Dowel ( used in this step). Secure screw the Cam Bolts () into the designated small holes on Upper Front Panels (D and E), as shown in the illustration.. Align and attach the Left Upper Front Panel (D) to Left Upper Side Panel (B) by using one M8 x 0 mm Wood Dowel () and two Cam Locks (). As shown. Ensure the outside edges are flush with each other. 4. Repeat last step to combine the Right Upper Front Panel (E) and Right Upper Front Panel (C) together. Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 8 Factory No. 468
19 Stock # MFC- E C D B A Cam Lock (6 used in this step) M8 x 0 mm Wood Dowel (4 used in this step) 5. Insert two M8 x 0 mm Wood Dowels () into the inner holes on the top edge of Left Upper Side Panel (B) and attach it the Top Panel (A) by engaging three Cam Locks (). As shown. 6. Repeat the same process with the Right Upper Side Panel (C). Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 9 Factory No. 468
20 8 Stock # MFC F E C D A B M8 x 0 mm Wood Dowel (4 used in this step) #0 x 50 mm Wood Screw (6 used in this step) 8 7. Insert four M8 x 0 mm Wood Dowels () into the inner holes on the bottom edge of the assembled Upper Side Panels (B and C). As shown. 8. Properly position the Center Shelf (F) onto the inserted Wood Dowels () making sure the back edges are flush with each other. Insert six 50 mm Wood Screws (8) through the countersunk holes underneath the Center Shelf (F) and securely screw into the Upper Side Panels (B and C) by a Phillips screwdriver. As shown. Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 0 Factory No. 468
21 Stock # MFC- K F A Cam Lock ( used in this step) M8 x 0 mm Wood Dowel ( used in this step) 9. Align and attach the Center Front Molding (K) to the Center Shelf (F) by using two M8 x 0 mm Wood Dowels () and three Cam Locks (). As shown. Make sure that the Cam Locks face inward. Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page Factory No. 468
22 Stock # MFC- A B C F F J I G H L G/H/I/J Cam Lock (8 used in this step) M8 x 0 mm Wood Dowel (4 used in this step) 0. Insert four M8 x 0 mm Wood Dowels () into the inner holes on the top of both Lower Side Panels (G and H). DO NOT insert the wood dowels into the cam bolt holes.. Align the large holes on the Center Shelf (F) with the inserted Wood Dowels () on the Lower Side Panels (G and H) and press them together. Attach the Center Shelf (F) into place by engaging eight Cam Locks (). As shown. Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page Factory No. 468
23 Stock # MFC- K I/J 5 #6 x mm Screw (4 used in this step) 5 Metal Bracket ( used in this step) A C K I G H. With the pilot holes as a guide, fasten the Center Front Molding (K) to the Lower Front Panels (I and J) by attaching two Metal Brackets () at the joints, using two mm Screws (5) per bracket. As shown. Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page Factory No. 468
24 Stock # MFC- A C Q A H Q 0 Ø x 4 mm Washer Head Screw (6 used in this step) 0. Now, go back and securely tighten all the Cam Locks and the Screws. Make sure that all the parts are tight and there are no gaps between the pieces. This will help keep the unit square. 4. Pick up the Back Panel (Q) and align the pre-drilled holes against the upper long edge with the pilot holes on the back stretcher of the Top Panel (A). Attach the Back Panel (Q) in place using the provided 4 mm Washer Head Screws (0). As shown. Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 4 Factory No. 468
25 Stock # MFC- A L Fireplace 5. Unpack the fireplace insert from the inner box and follow the instructions to install the Top Trim and Side Trims to the fireplace insert. 6. Lift the fireplace insert carefully into the back of the assembled mantel and center it in the opening. DO NOT drag the insert across the Bottom Panel (L) as it may scratch the unit. Check the alignment, and then attach the Fireplace Insert to the Lower Front Panels (I and J) by inserting two Inserts Screws through the drilled holes on each Side Trim and securely screw into place by a Phillips screwdriver. Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 5 Factory No. 468
26 Stock # MFC- A A A E B D Acrylic Stopper ( used in this step) 9 Cam Lock Cover (8 used in this step) NOTE: You must install the Acrylic TV Stopper to prevent the TV from tipping when placing your flat panel television directly on the Top Panel (A). 7. Remove the tape of the Acrylic Stopper (9) and place it in the cut-out of the acrylic stopper template on the front of the Top Panel (A). Make sure it is properly aligned before applying pressure. 8. Remove the acrylic stopper template carefully, as shown above. 9. Plug the Cam Lock Covers () onto the visible Cams Locks to conceal the Cam Locks. Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 6 Factory No. 468
27 Stock # MFC- A Tools required: Phillips Screwdriver, Power Drill, /8 Drill Bit and Rubber Mallet. 40. Ask for assistance to position the assembled mantel at the desired location against a wall. 4. Now, follow the instructions printed on the plastic bag containing the Tipping Restraint Hardware to attach the tip-over restraint to the unit and the wall, as shown in the illustration. NOTE: Young children can be seriously injured by tipping furniture. You must install the Tipping Restraint Hardware with the unit to prevent the unit from tipping, causing any accidents or damage. The tipping restraints are intended only as a deterrent, they are not a substitute for proper adult supervision. The tipping restraints are not earthquake restraints. If you wish to add the extra security of earthquake restraints, they must be purchased and installed separately. 4. Connect the fireplace to a power transformer. Follow the separated operating manual of electric fireplace to control your fireplace. Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 7 Factory No. 468
28 Care and Maintenance Stock # MFC- Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polishes is not necessary. Should you choose to use polishes, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Never use water to clean your furniture as it may cause damage to the finish. Always use coasters under beverage glasses and flowerpots. Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing. Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create spotting within the furniture finish. Stains or marks from crayons or ink markers will be difficult to remove. In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a professional to repair your furniture. Check bolts/screws periodically and tighten them if necessary. Further advice about wood furniture care It is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity changes can cause fading, warping, shrinking and splitting of wood. It is advised to keep furniture away from direct sunlight as sun may damage the finish. Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful tips will enhance your furniture as it ages. Cleaning trim for fireplace Clean the metal trim using a soft cloth, slightly dampened with citrus oil based product and buff with a clean soft cloth. DO NOT use brass polish or household cleaners as these products will damage the metal trim. Citrus oil based products can be obtained at supermarkets or hardware stores. A Touch-up Pen has been provided to repair any small nicks or scratches that may occur during assembly or shipping. We hope you enjoy your purchase for many years. Thank you for choosing Whalen Furniture! Please call for replacement parts or assistance: Whalen Furniture Mfg., Inc. Page 8 Factory No. 468
29 IF YOU NEED TO ORDER ANY REPLACEMENT PARTS, PLEASE USE THE LIST BELOW Media Fireplace Console (MFC-) *MFC---TP Top Panel *MFC--6-SM Side Molding *MFC---G Glue *MFC---LUSP Left Upper Side Panel *MFC--7-BP Back Panel *MFC---TRHK Tipping Restraint Hardware Kit *MFC---RUSP Right Upper Side Panel *MFC--8-CL Cam Lock *MFC---TUP Touch-up Pen *MFC--4-LUFP Left Upper Front Panel *MFC--9-CB Cam Bolt *MFC--CH Complete Hardware *MFC--5-RUFP Right Upper Front Panel *MFC--0-M6x0WD M6 x 0 mm Wood Dowel *MFC--H Heater (SF0-H) *MFC--6-CS Center Shelf *MFC---M8x0WD M8 x 0 mm Wood Dowel *MFC--B Blower (SF0-B) *MFC--7-LLSP Left Lower Side Panel *MFC---S #6 x mm Screw *MFC--FGDM Flame Generator Drive Motor (SF0-FGDM) *MFC--8-RLSP Right Lower Side Panel *MFC---5S #0 x 5 mm Screw *MFC--RS Reflector Spindle (SF0-RS) *MFC--9-LLFP Left Lower Front Panel *MFC--4-8S #8 x 8 mm Screw *MFC--FIGF Fireplace Insert Glass with Frame (SF0-FIG) *MFC--0-RLFP Right Lower Front Panel *MFC--5-50WS #0 x 50 mm Wood Screw *MFC--EBL Ember Bed/Logs (SF0-EBL) *MFC---CFM Center Front Molding *MFC--6-4WHS Ø x 4 mm Washer Head Screw *MFC--LB Light Bulb (SF0-LB) *MFC---BP Bottom Panel *MFC--7-CLC Cam Lock Cover *MFC--TT Top Trim (SF0-TT) *MFC---FBS Front Bottom Stretcher *MFC--8-MB Metal Bracket *MFC--ST Side Trim (SF0-ST) *MFC--4-BBS Back Bottom Stretcher *MFC--9-AS Acrylic Stopper *MFC--IS Insert Screw (SF0-IS) *MFC--5-FBM Front Bottom Molding *MFC--0-FP Floor Protector *MFC--CFI Complete Fireplace Insert (SF0-)
Media Fireplace Console Stock # WMFP48FH-10
LOT NUMBER: DATE PURCHASED: / / Media Fireplace Console ADULT ASSEMBLY AND SET-UP REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where
More informationSumner Corner Media Fireplace Stock # SUMCMF-23
LOT NUMBER: DATE PURCHASED: / / Sumner Corner Media Fireplace ADULT ASSEMBLY AND SET-UP REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store
More informationMenards_ BARSTON 42'' DUAL-USE FIREPLACE Model # WS /WS
LOT NUMBER: DATE PURCHASED: / / Menards_ BARSTON 42'' DUAL-USE FIREPLACE ADULT ASSEMBLY AND SET-UP REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item
More informationSteele TV Stand Stock # BH
LOT NUMBER: DATE PURCHASED: / / Steele TV Stand Stock # BH46-084-899-02 ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store
More informationLeland 42" Fireplace Console
LOT NUMBER: DATE PURCHASED: / / Leland 42" ireplace Console Model # WS42OW23W ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
More informationMenards_ GLENMORE 60'' MEDIA FIREPLACE Model # WS /WS
LOT NUMBER: DATE PURCHASED: / / Menards_ GLENMORE 60'' MEDIA FIREPLACE ADULT ASSEMBLY AND SET-UP REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to
More informationTV Console Model # AVCLEC60-DB
LOT NUMBER: DATE PURCHASED: / / TV Console ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased. Please
More informationStanford Fireplace Console Model # GOE57CON26FP
LOT NUMBER: DATE PURCHASED: / / Stanford Fireplace Console ADULT ASSEMBLY AND SET-UP REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store
More informationCHARLESTON 54'' Media Fireplace Model # WS FP
LOT NUMBER: DATE PURCHASED: / / CHARLESTON 54'' Media Fireplace Model # WS3062426FP ADULT ASSEMBLY AND SET-UP REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return
More informationJasper Chrome & Glass Desk Model # ODUS-CGTD
LOT NUMBER: DATE PURCHASED: / / Jasper Chrome & Glass Desk ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES AS RECEIVED If you have any questions regarding assembly
More informationASSEMBLY INSTRUCTIONS
SKU # 693964 Model #WSFP46ECHD-8 ASSEMBLY INSTRUCTIONS Grafton 46 inch Media Console Infrared Electric Fireplace in Medium Brown Finish Questions, problems, missing parts? Before returning to the store,
More informationBelhaven Open Bookcase Model # BEHBK
LOT NUMBER: DATE PURCHASED: / / Belhaven Open Bookcase ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased.
More informationTV Console Model # AVCBEC60-SMB
LOT NUMER: DATE PURCHASED: / / TV Console ADULT ASSEMLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased. Please
More informationPearson Open Bookcase Model # PSBK
LOT NUMBER: DATE PURCHASED: / / Pearson Open Bookcase ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased.
More informationLeadenhall Collection Hutch Model # JCS H
LOT NUMBER: DATE PURCHASED: / / Leadenhall Collection Hutch ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES AS RECEIVED If you have any questions regarding assembly
More informationMercer Dining Bench Stock # BH
LOT NUMBER: DATE PURCHASED: / / Mercer Dining Bench ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased.
More informationRaine File White Model # SPLS-RFL-WH
LOT NUMBER: DATE PURCHASED: / / Raine File White ADULT ASSEMBLY REQURED f you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased.
More informationSheldon 48" Fireplace Model # WSF48SH26C # WSF48SH26M
LOT NUMBER: DATE PURCHASED: / / Sheldon 48" Fireplace Model # WSF48SH26C # WSF48SH26M ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item
More informationAvignon 5-pc Dining Set (Side Chair) Model # AN5PD
LOT NUMBER: DATE PURCHASED: / / Avignon 5-pc Dining Set (Side Chair) ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where
More informationDalton Park 5pc Dining Set
Stock #: BH12-084-499-04 Lot Number: Date Purchased: Date 2014-09-10 Rev. 2 Factory: WOFUVI THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. STOP
More informationBelhaven Workstation Model # BEHWS
LOT NUMBER: DATE PURCHASED: / / Belhaven Workstation ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased.
More informationBraxton 7-pc Dining Set (Chair) Model # BRA7PD-E
LOT NUMBER: DATE PURCHASED: / / Braxton 7-pc Dining Set (Chair) ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where
More informationTriton Wood Veneer Bookcase Model # ODUS-TWVB
Triton Wood Veneer Bookcase LOT NUMBER: DATE PURCHASED: / / ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was
More informationBelhaven Executive Desk Model # BEHED
LOT NUMBER: DATE PURCHASED: / / Belhaven Executive Desk ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased.
More informationBig Sky Counter Height Table
LOT NUMBER: ATE PURCHASE: / / Big Sky Counter Height Table Model # BSKY-6806 AULT ASSEMBLY REQUIRE If you have any questions regarding assembly or if parts are missing, O NOT return this item to the store
More informationSamford Contemporary Computer Desk Model # JCS AD
LOT NUMBER: DATE PURCHASED: / / Samford Contemporary Computer Desk ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES AS RECEIVED If you have any questions regarding
More informationVictory 7-pc Dining Set (Table) Model # VIC7PD-S
LOT NUMBER: DATE PURCHASED: / / Victory 7-pc Dining Set (Table) ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where
More informationBase Cabinet w/drawers
Base Cabinet w/drawers WSBC-4C Dark Cherry finish WSBC-4W White finish ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES AS RECEIVED Pacific Standard Time: 8:30 a.m.
More informationBookcase ITM. / ART Model # KARLBK-N1 ASSEMBLY INSTRUCTIONS
Bookcase ITM. / ART. 1158049 Model # KARLBK-N1 ASSEMBLY INSTRUCTIONS IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY If you have any questions regarding assembly or if parts are missing, DO NOT
More informationRaine Desk White Model #SPLS-RDS-WH
LOT NUMER: DATE PURCHASED: / / Raine Desk White ADULT ASSEMLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased.
More informationTV Console. ITM. / ART Model # DER66C-R1 ASSEMBLY INSTRUCTIONS IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
LOT NUMBER: DATE PURCHASED: / / TV Console ITM. / ART. 1129857 Model # DER66C-R1 ASSEMBLY INSTRUCTIONS IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY If you have any questions regarding assembly
More informationAutumn Lane 5-pc Dining Set Stock # BH
LOT NUMBR: DAT OF PURCHAS: / / Autumn Lane 5-pc Dining Set ADULT ASSMBLY RQUIRD If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased.
More informationSanta Fe 3-in-1 TM Console Stock # XLSFEC54-WN U.S. Patent 8,622,005
LOT NUMBER: DATE PURCHASED: / / Santa Fe 3-in-1 TM Console U.S. Patent 8,22,00 This item is designed to be a 3-in-1 configuration. Please choose the option that best suits your needs. DO NOT discard any
More informationSanta Fe Kitchen Cart with Metal Shelves Stock # SFKCWMS
LOT NUMBER: TE PURHSE: / / Santa Fe Kitchen art with Metal Shelves ULT SSEMBLY REQUIRE If you have any questions regarding assembly or if parts are missing, O NOT return this item to the store where it
More information9 Piece Counter Height Dining Set
9 Piece ounter Height Dining Set ITM. / ART. 2000706 Model # SAV9PH-N ASSEMLY INSTRUTIONS IMPORTANT, RETAIN FOR FUTURE REFERENE: READ AREFULLY If you have any questions regarding assembly or if parts are
More information54" 3-in-1 TM Console Model # XLMEC54-LR U.S. Patents 8,079,311 & 8,191,485
LOT NUMBER: DATE PURCHASED: / / 54" 3-in-1 TM Console U.S. Patents 8,079,311 & 8,191,485 This item is designed to be a 3-in-1 configuration. Please choose the option that best suits your needs. DO NOT
More informationMetro 3-in-1 TV Console (SMXL-6)
Metro 3-in-1 TV Console (SMXL-6) LOT NUMBER: DATE PURCHASED: / / This item is designed to be 3-in-1 configuration. Please choose which of the 3 options suits your needs. DO NOT discard any of the hardware
More informationLeadenhall Collection Desk Model # JCS I
LOT NUMBER: DATE PURCHASED: / / Leadenhall Collection Desk ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES AS RECEIVED If you have any questions regarding assembly
More information2 ADULTS REQUIRED FOR ASSEMBLING
2 ADULTS REQUIRED FOR ASSEMBLING If you have any questions regarding assembly or if you are missing parts, do not return this item to Retailer Store Please call our customer service number and have your
More informationGeneva Workstation Model #: Made in China
ASSEMBLY INSTRUCTIONS Geneva Workstation Model #: 6278-544 Made in China THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Lot Number: Date Purchased:
More informationSigna Gaming Theater TM 3-in-1 TM TV Stand Model # SIG3IN1CGT U.S. Patents 8,079,311 & 8,191,485 and other Patent Pending
LOT NUMBER: DATE PURCHASED: / / Signa Gaming Theater TM 3-in-1 TM TV Stand Model # SIG3IN1CGT U.S. Patents 8,079,311 & 8,191,485 and other Patent Pending This item is designed to be a 3-in-1 configuration.
More informationIMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
LOT NUMER: DTE PURCHSED: / / Savonne 9 Piece Counter Height Dining Set ITM. / RT. 844024 (U.S., Costco.com, Taiwan) ITM. / RT. 924710 (Mexico, CostcoMX.com) Model # SV9PCH SSEMLY INSTRUCTIONS IMPORTNT,
More informationFlat Panel Console (PRO-9)
LOT NUMBER: DATE PURCHASED: / / Flat Panel Console (PRO-9) Entertainment Center MADE IN CHINA Model: PRO-9 IMPORTER: COMERCIALIZADORA MÉXICO AMERICANA, S. DE R.L. DE C.V. AV. NEXTENGO NO. 78 COL. SANTA
More informationHastings 3-in-1 Gaming Theater TM Console Model # HST3IN1C U.S. Patents 8,079,311 & 8,191,485 and other Patent Pending
LOT NUMBER: DATE PURCHASED: / / Hastings 3-in-1 Gaming Theater TM Console U.S. Patents 8,079,311 & 8,191,485 and other Patent Pending This item is designed to be a 3-in-1 configuration. Please choose the
More informationAcademy Work Center Model # SPUS-ACA-D
LOT NUMBER: DTE PURCHSED: / / cademy Work Center DULT SSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased.
More information2 ADULTS REQUIRED FOR ASSEMBLING
2 ADULTS REQUIRED FOR ASSEMBLING If you have any questions regarding assembly or if you are missing parts, do not return this item to Retailer Store Please call our customer service number and have your
More informationOttoman Gaming Chair Model #WC-502D
LOT NUMBER: DTE PURHSED: / / Ottoman Gaming hair Model #W-502D DULT SSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it
More informationSagemoor 2-pk Dining Chairs
LOT NUMR: DAT PURHASD: / / Sagemoor 2-pk Dining hairs Model # SAG2PK- ASSMLY INSTRUTIONS IMPORTANT, RTAIN FOR FUTUR RFRN: RAD ARFULLY If you have any questions regarding assembly or if parts are missing,
More informationADULT ASSEMBLY REQUIRED
ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if you are missing parts, do not return this item to the Retailer Store Please call our customer service number and have your instructions
More informationTuscany 32" x 79" Open Bookcase
Tuscany 32" x 79" Open Bookcase ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES If you have any questions regarding assembly or if you are missing parts, do not return
More informationADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES
ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES If you have any questions regarding assembly or if you are missing parts, do not return this item to the retailer.
More information9-piece Dining Set. ITM. / ART Model # CSC9PD-3 ASSEMBLY INSTRUCTIONS IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
9-piece Dining Set ITM. / RT. 1158046 Model # CSC9PD-3 SSEMLY INSTRUCTIONS IMPORTNT, RETIN FOR FUTURE REFERENCE: RED CREFULLY If you have any questions regarding assembly or if parts are missing, DO NOT
More informationWhalen Furniture Mfg. Factory No. 5 Page # 1
If you have any questions regarding assembly or if you are missing parts, do not return this item to Sam s Wholesale Club Please call our customer service number and have your instructions and parts list
More informationModel # XL-44 / XL-44E. U.S. Patent 8,561,551 CA Patent 2,811,974
3-in-1 TM TV Stand Model # XL-44 / XL-44E U.S. Patent 8,561,551 CA Patent 2,811,974 LOT NUMBER: ATE PURCHASE: / / This item is designed to be a 3-in-1 configuration. Please choose the option that best
More informationADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES
ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES If you have any questions regarding assembly or if you are missing parts, do not return this item to the Sam s Wholesale
More informationGraysen Manager s Chair Model # WC-666
LOT NUMBER: DATE PURCHASED: / / Graysen Manager s Chair ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES AS RECEIVED. If you have any questions regarding assembly or
More informationIMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damag
IMPORTANT 20 05520 0772 Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions
More informationLOGAN HUTCH WITH SHELVES 36
LOGAN HUTCH WITH SHELVES 36 Date: 12-May-15 www. potterybarn.com Page 1 of 9 Important Safety Instructions: Please read all instructions carefully before assembling. For your safety, assembly by two or
More informationExpandable Bar Cabinet CF4001
Expandable Bar Cabinet CF4001 Congratulations! You have purchased a stylish piece of Crosley Furniture. We strive to provide fine furniture products, built with quality materials and hand finished details.
More informationC. Side Panel 1 pc. B. Side Panel. 1 pc. J2. Shelf. 4 pcs. Adjustable Pin 24 pcs. (+1 extra) M3.5x16 Wood Screw 20 pcs. (+1 extra) 2 pcs.
IMPORTANT 20 05180 0307 Hutch Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly
More informationCDAS CDAS39 SHELF UNIT
BY CDAS CDAS39 SHELF UNIT 0708 IMPORTANT! Assembly may require the assistance of another person. Before you begin assembly: READ THE DIRECTIONS all the way through one time. This will speed up the process
More informationWARM SHAKER / NORFOLK / LEXINGTON TV MEDIA STAND
SIMP II H O M E L I F E Y D E S I GN WARM SHAKER / NORFOLK / LEXINGTON TV MEDIA STAND 1/21 FOR REPLACEMENT PARTS OR HELP WITH ASSEMLY PLEASE CONTACT US AT: simpli-home.com/customer-support PLEASE ENSURE
More informationJ. Shelf 4 pcs. L. Door. K. Door. 1 pc. Magnet. 2 pcs. Adjustable Pin. 16 pcs. (+1 extra)
88 5523 61 Buffet IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly
More informationStuff-Your-Stuff Platform Bed (Twin and Full)
Stuff-Your-Stuff Platform Bed (Twin and Full) Pre-Assembly: Please read all instructions before beginning assembly. Assembly by two people is a must. Save all packing materials until assembly is complete
More informationLOGAN BASE WITH DOORS 36
(NOTE : This product comes with only 1 shelf that is adjustable please refer to Assembly Instruction) LOGAN BASE WITH DOORS 36 Date: 2 Apr 15 www. potterybarn.com Page 1 of 7 Important Safety Instructions:
More informationASSEMBLY INSTRUCTIONS FOR YOUR 6501 & 7501 SP & TH CONVERTIBLE CRIBS
Furniture 20 Corporation Row, Edison, NJ 08817 Phone (718) 478 5100, Fax (718) 478 5117 www.rominafurniture.com D O N O T T H R O W T H I S INSTRUCTION BOOKLET ASSEMBLY INSTRUCTIONS FOR YOUR 6501 & 7501
More informationMCH42 / MCH48 MODULAR SERIES 2400/3000 CORNER HUTCH
/ MODULAR SERIES 2400/3000 CORNER HUTCH IMPORTANT! Assembly may require the assistance of another person. Before you begin assembly: READ THE DIRECTIONS all the way through one time. This will speed up
More informationDOREL ASIA KITCHEN CART
DOREL ASIA Model No: WM6545N (Natural) WM6545W (White) UPC CODE: 0-65857-16525-8 (Natural) 0-65857-16526-5 (White) NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND
More information3-in-1 TM Flat Panel Console Model # XL-10
LOT NUMBER: DATE PURCHASED: / / 3-in-1 TM Flat Panel Console This item is designed to be a 3-in-1 configuration. Please choose the option that best suits your needs. DO NOT discard any of the hardware
More informationKitchen Island IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches o
88 5170 943 Kitchen Island IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these
More informationMH60/MH72 DESK HUTCH IMPORTANT!
MH60/M2 DESK HUTCH IMPORTANT! Assembly may require the assistance of another person. Before you begin assembly: READ THE DIRECTIONS all the way through one time. This will speed up the process and help
More informationB. Side Panel. E. Middle Panel 1 pc. 1 pc. 1 pc. S. Side Rack. 1 pc. T. Base Rack. U. Pipe 3 pcs. M6x35 Head Cap Bolt 14 pcs.
IMPORTANT 88 5089 95C Kitchen Cart Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly
More informationCloset Wall Hanging Unit
IMPORTANT 88 5531 772 Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions
More informationDisplay-Top Apothecary Cabinet. Assembly Instructions. Page 1
Display-Top Apothecary Cabinet Assembly Instructions Page 1 Display-Top Apothecary Cabinet Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean,
More informationQWALL 5.2 (2 Back Panels)
QWALL 5. ( Back Panels) SHOWER ACRYLIC WALL INSTALLATION INSTRUCTIONS IMPORTANT DreamLine TM reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date
More informationDOREL ASIA COUNTER HEIGHT DESK NEED HELP! Model No: WM3514 UPC CODE:
DOREL ASIA COUNTER HEIGHT DESK Model No: UPC CODE: 0-65857-15762-8 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Lot number: (TAKEN FROM
More information3-in-1 TM TV Console Model # XL-25E U.S. Patent 8,622,005
LOT NUMBR: DAT PURCHASD: / / 3-in-1 TM TV Console Model # XL-2 U.S. Patent 8,22,00 This item is designed to be a 3-in-1 configuration. Please choose the option that best suits your needs. DO NOT discard
More informationELLIS 2 DOOR 2 DRAWER SIDBOARD
John Lewis ELLIS 2 DOOR 2 DRAWER SIDBOARD Stock Number: 87702732 Thank you for purchasing this Ellis 2 Door 2 Drawer Sideboard. Please read the instructions carefully before use to ensure safe and satisfactory
More informationLaminate Cabinet Installation Instructions
Laminate Cabinet Installation Instructions www.easygaragestorage.com/installation How To Use These Instructions Thank you for your purchase! Please read each step of this manual thoroughly to ensure proper
More informationASSEMBLY INSTRUCTIONS FOR YOUR 5510s STATIONARY CRIB
THIS CRIB CONFORMS TO APPLICABLE REGULATIONS PROMULGATED BY THE CONSUMER PRODUCT SAFETY COMMISION AND BY THE AMERICAN SOCIETY FOR TESTING AND MATERIALS ASSEMBLY INSTRUCTIONS FOR YOUR 10s STATIONARY CRIB
More informationTV/Media Stand- Mission Oak Finish. Assembly Instructions
TV/Media Stand- Mission Oak Finish Assembly Instructions TV/Media Stand Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Before
More informationCloset Wall Drawer Unit
IMPORTANT 88 5531 752 Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions
More informationLW36 LAB WORKSTATION IMPORTANT!
BY LW36 LAB WORKSTATION 01/06 IMPORTANT! Assembly may require the assistance of another person. Before you begin assembly: READ THE DIRECTIONS all the way through one time. This will speed up the process
More informationQWALL 4 ACRYLIC SHOWER WALL INSTALLATION INSTRUCTIONS
QWALL 4 ACRYLIC SHOWER WALL INSTALLATION INSTRUCTIONS IMPORTANT DreamLine TM reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical
More information! WARNING: FALL HAZARD - To prevent death or serious injury from
pottery barn kids ARMOIRE CHANGING TABLE! WARNING: FALL HAZARD - To prevent death or serious injury from falls, always keep child within arm s reach. Read all instructions before use of the changing table.
More informationPlease read these instructions before use and keep for future reference
Wardrobe Assembly Guide Allen Key Provided (if required) Philips Screwdriver Required Hammer Required Please read these instructions before use and keep for future reference Caution! Two Person Assembly
More informationELLIS SIDEBOARD. Pre-assembly preparation. Necessary Tools. John Lewis
John Lewis ELLIS SIDEBOARD Stock Number: 87702726 Thank you for purchasing this Ellis sideboard. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product.
More informationHUTCH BOOKCASE. Fine Baby Furniture MADE IN VIETNAM
DOLCE BABI Fine Baby Furniture HUTCH BOOCASE IMPORTANT! Please keep these instructions for future reference. Please read these instructions before assembly and use of this product. Adult assembly is required.
More informationRiverside. Windward Bay EntertaInment Wall System Assembly Instructions. Made In Viet Nam. Right Pier. Bridge & Back Panel.
EntertaInment Wall System Page 1 of 12 Product No. 42840 42848 42849 42843 Product Description Console Left Pier Right Pier Bridge & Back Panel Right Pier Bridge & Back Panel Left Pier 63" Inch Ent. Console
More informationStreamline L-Shaped Desk
www.teknikoffice.co.uk Teknik For all your newfangled gadgetry. Streamline L-Shaped Desk Model 5414417 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE
More informationASSEMBLY INSTRUCTION FOR WYTHE BURLED WOOD BAR
ASSEMBLY INSTRUCTION FOR WYTHE BURLED WOOD BAR IMPORTANT SAFETY INSTRUCTIONS: Please read all instructions carefully before assembling. For your safety, assembly by two or more adults is strongly recommended.
More informationADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES
SHELF MAXIMUM CAPACITY: 1,000 lb/ 454 kg EVENLY DISTRIBUTED. ENTIRE UNIT MAXIMUM CAPACITY: 5,000 lb/ 2,268 kg EVENLY DISTIRBUTED. CONCENTRATED LOAD CAPACITY: 150 lb/ 68.18 kg (PSF) PER SQUARE FOOT. ADULT
More informationWhite Black Espresso Corner Desk Assembly Instructions
White Black Espresso Corner Desk Assembly Instructions Page 1 White / Black / Espresso Corner Desk Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on
More informationTilting Wall Mount Fits 37" to 70" Flat Panel TVs Model No: DCD13020
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Lot Number: Date: Tilting Wall Mount Fits 37" to 70" Flat Panel TVs Model No: DCD1300 MIN:7.87
More informationShould you experience any missing or damaged parts, do not return to the store. Please contact us directly at
Congratulations! You have purchased a stylish piece of Crosley Furniture. We strive to provide fine furniture products, built with quality materials and hand finished details. Please carefully follow the
More informationVINTNER WINE TOWER HARDWARE TOOLS REQUIRED COMPONENTS cam covers cams 16 - cam screws. 1 - pull small screws.
HRDWRE 16 - cams 16 - cam s 16 - cam covers 1 - pull 1 - pull bolt 40 - wood dowels 28 - small s 8 - medium s Thank you for purchasing the Vintner Wine Tower. This page lists all the contents included
More informationWARNING: Failure to follow these warnings and assembly instructions could
OXFORD BUNK BED TWIN OVER TWIN & FULL OVER FULL For Bunk Bed Twin Over Twin WARNING: Failure to follow these warnings and assembly instructions could result in serious injury or death. To help prevent
More informationOWNER'S MANUAL 5 PC DINING SET DATE OF PURCHASE: NOTE: MODEL #: DASE3583 UPC CODE: RECEIPT OF PURCHASE: ATTACH HERE NEED HELP!
OWNER'S MANUAL 5 PC DINING SET MODEL #: NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION PLEASE READ AND KEEP FOR FUTURE REFERENCE. RECEIPT OF PURCHASE: DATE OF PURCHASE: ATTACH HERE
More informationUNIDOOR (STYLE B & C)
UNIDOOR (STYLE B & C) SHOWER DOOR GLASS PANEL INSTALLATION INSTRUCTIONS IMPORTANT DreamLine TM reserves the right to alter, modify or redesign products at any time without prior notice. For the latest
More informationBELGIAN EXT. REC DINING TABLE
BELGIAN EXT. REC DINING TABLE Date: Williams 20 Jul. 2015 Sonoma Product Information Dept. www.williams sonoma.com Page 1 of 5 Page 1 of 5 Important Safety Instructions: Please read all instructions carefully
More information