Kitchen Base Cabinet: Single Drawer with Double Doors Cabinets from Scratch
|
|
- Flora Barnett
- 6 years ago
- Views:
Transcription
1 Kitchen Base Cabinet: Single Drawer with Double Doors by Cabinets from Scratch Our Home from Scratch LLC Page 1
2 Disclaimer Our Home from Scratch LLC and its legal owners cannot be held responsible for any loss, damage, disappointment, injury or death resulting from following the procedures or techniques described in these plans. Our Home from Scratch LLC and its legal owners assume no risk and cannot be held responsible for any misuse of these plans either directly or indirectly. They make no statements as to the weight or strength capacity of the item described in these plans. These plans may contain errors and Our Home from Scratch LLC and its legal owners cannot be held responsible for any error. No guarantee is made as to the quality of any product that is described herein. Always use appropriate Personal Protection Equipment when working with tools and exercise caution if taking any action associated with these plans. Attempt at your own risk. Some woodworking skills are required. Sorry if that s a bummer. This procedure contains affiliate links. Distribution Policy By downloading these plans you consent to this distribution policy. These plans are not to be distributed in anyway without the express consent of Our Home from Scratch LLC or its legal owners. The individual pictures or procedures contained herein are also not to be copied or shared. Our Home from Scratch LLC Page 2
3 Introduction These plans for a base kitchen cabinet are nearly identical to the kitchen cabinets I built from scratch in my first home in Philadelphia. They design has been updated to include better joinery methods and the doors and drawers are overlay instead of inset, which makes the project easier for entry level woodworkers. The cabinet box is made from 3/4 thick plywood and includes a 3/4" thick back board. While this thicker back board makes the cabinet heavier and slightly more expensive, it also adds strength, rigidity and reduces the different types of plywood you ll need to purchase and manage. It s the same approach I took in my kitchen cabinets. Feel free to add additional fasteners to this project if the sides of the cabinet will be between other cabinets or walls. The drawers are made from solid maple hardwood and birch plywood and I recommend you stick with that material since it s more attractive and it will hold up much better over time compared to pine or other softwoods. If you get stuck on any particular part of these woodworking plans, feel free to me at John@ourhomefromscratch.com with any questions. For full cabinet building training, visit for more information on our comprehensive video training course. I hope you enjoy the challenge of building this project. R, John Gerard Our Home from Scratch LLC Page 3
4 Getting Started These woodworking plans will take you step by step through the build of a kitchen base cabinet with a single drawer and two doors. The first thing you should do is read through these procedures to familiarize yourself with the materials, tools and skill requirements necessary to complete them. Tools The tools and miscellaneous supplies I used for this project include the following: 1. Table Saw with 60 tooth saw blade 2. Miter Saw (also with 60 tooth saw blade) 3. Pneumatic Brad Nail Gun with Pancake Compressor 4. Pocket Screws 5. Dado Blade Set 6. Cordless Drill 7. Wood Glue 8. 3/4" Long Brad Nails 9. K-Body Clamps Dimensions This cabinet is designed to the following dimensions: 1. Width: Height: 34 ½ 3. Depth: 24 This version of the cabinet has ¾ overlay doors and drawers. Feel free to modify the plans to meet your needs. A customizable version of these plans in MS Excel are available to Cabinets from Scratch subscribers. Our Home from Scratch LLC Page 4
5 Material: Listed below in Table 1 is a list of all the lumber you ll need to build one cabinet. All of this lumber should be available at your local large hardware store (Lowe s, Home Depot, True Value, etc.), except for the maple. Half-inch thick hardwood maple boards can be purchased from your local lumberyard or ordered online. Many lumberyards will also plane down a ¾ thick maple board to ½ thick upon request and possibly for a small fee. If you can t find ½ thick maple, feel free to substitute it with ½ thick oak, which is more readily stocked at large home improvement stores. Avoid softwoods like pine for this project. TABLE 1: LUMBER PURCHASE LIST Item Description Width Length (in) Qty 1 3/4" Thick Birch or Oak Plywood /4" Thick Birch or Oak Plywood /4 Thick Poplar or Oak Hardwood 2 ½ /4" Thick Poplar or Oak Hardwood 7 ½ /2" Thick Birch or Oak Plywood /2 Thick Maple Hardwood 4 ½ /4" Thick Birch Plywood Our Home from Scratch LLC Page 5
6 Hardware: You ll also need to purchase the following material to complete your cabinet build. The drawer parts were sized to accept a Blum drawer runner. If you decide to purchase a different drawer runner, you might need to resize the drawer parts. Blum components are not cheap, but they work really well. There are less expensive options available, but again, you ll probably have to resize the drawer box to match different drawer runner hardware. 1. Blum Drawer Runner without Blumotion. PN: 562H5330C 2. Blum Locking Device Right Side: PN: T R 3. Blum Locking Device Left Side: PN: T L 4. Drawer Shelf Pins 5. Door and Drawer Pulls (you pick) 6. 3/4" Overlay Hinges Preparation: To begin this project, you ll need to take your purchased lumber and cut out all of the parts listed in Table 2. Plywood parts should be cut to their final size using a combination of a table saw and a circular saw. Refer to the plywood cut sheets at the end of these plans Hardwood components however, should be cut to their final lengths, but not their final widths. All hardwood boards should be cut slightly wider than their final width on the table saw then brought down to their final width using a jointer or thickness planer. If you skip this process and simply cut your hardwood boards down to their final widths using the table saw you ll end up with boards that have a very rough-cut and uneven edge. It won t look as clean or professional. Our Home from Scratch LLC Page 6
7 TABLE 2: CABINET PARTS LIST Hardwood Cabinet Parts Item Name Length (in.) Width (in.) Thk (in.) Qty. Material 1 Stiles /4 2 Oak or Poplar 2 Top Rail /4 1 Oak or Poplar 3 Mid-Rail /4 1 Oak or Poplar 4 Bottom Rail /4 1 Oak or Poplar 5 Vertical Divider /4 1 Oak or Poplar 6 Drawer Front 33-1/2 6-1/2 3/4 1 Oak or Poplar 7 Shelf Front 33-3/4 1 3/4 1 Oak or Poplar Hardwood Door Parts Item Name Length (in.) Width (in.) Thk (in.) Qty. Material 8 Door Stiles 21-1/2 2 3/4 4 Oak or Poplar 9 Door Rails /4 4 Oak or Poplar Cabinet Plywood Parts Item Name Length (in.) Width (in.) Thk (in.) Qty. Material 10 Sides 34-1/2 23-1/2 3/4 2 Matching Ply 11 Bottom 34-3/4 22-5/8 3/4 1 Matching Ply 12 Back 34-1/2 34-3/4 3/4 1 Matching Ply 13 Shelf 33-3/4 12 3/4 1 Matching Ply Hardwood Drawer Parts Item Name Length (in.) Width (in.) Thk (in.) Qty. Material 14 Sides /4 1/2 2 Maple 15 Front 30-9/16 4-1/4 1/2 1 Maple 16 Back 30-9/16 4-1/4 1/2 1 Maple 17 Sides /4 1/2 2 Maple Plywood Door Parts Item Name Length (in.) Width (in.) Thk (in.) Qty. Material 18 Door Panel /2 2 Matching Ply Plywood Drawer Parts Item Name Length (in.) Width (in.) Thk (in.) Qty. Material 19 Bottom 30-9/ /4 1/4 1 Birch Ply Our Home from Scratch LLC Page 7
8 Machining: With all of your lumber cut to their final dimensions, we can begin machining the lumber to add grooves and pocket screw holes, which will allow us to assemble the cabinet. Face Frame Let s start with the face frame. Lay out all of your face frame boards down on a workbench. Evaluate each board to determine which side looks best. Using a pencil, lightly mark the better side so you know what side is which. Flip all of the boards over. Drill two pocket screw holes on both ends of the backsides of the Top Rail, the Middle Rail and the Bottom Rail. Drill one pock screw hole on the ends of the back of the Vertical Divider. The stiles then get a ¼ deep by ¾ wide groove down the length of the back. These grooves will allow the cabinet box to recess and attach to the face frame during assembly. This groove needs to be located ¼ in from the outside edge of the stiles. Figure 1 illustrates what the back of the face frame will look like once assembled. You don t need to assemble it at this point. Our Home from Scratch LLC Page 8
9 Doors Figure 1: Face Frame Back with Pocket Screw Holes and Stile Grooves Moving onto the doors, you ll need to expose a ¾ long tongue (or tenon) at the ends of each door rail. For a clear instruction on how to accomplish this using a table saw, watch this YouTube video from my channel: Once the tongues are exposed on the door rails, you can cut a ¼ wide by ¼ deep groove down the middle of each door part. Next, raise the table saw blade to ¾ high and make a 2-1/2 long groove on the ends of the door stiles. This will allow the tongues on the rails to plug into the stiles. Test for fit. For another example of this technique, you can watch this YouTube video from my channel: At this point, you can cut a ¼ deep by ¼ wide rabbit all along the edge of the door center panels. You should be able to assemble doors dry without any glue to test its fit up. Make adjustments where necessary. Our Home from Scratch LLC Page 9
10 Drawers The drawer front is easy. Once it s cut to its final dimensions, it s complete. For the drawer box, you ll need to do a little machining. Add ¼ deep by ¼ wide groove down the length of all four hardwood drawer parts. The bottom edge of the groove should allow a ½ of remaining material. See Figure 2 for guidance. This groove will support the drawer bottom once assembled. Figure 2: Groove in the Drawer Box Sides, Front and Back Next we ll need to add notches to both ends of the front and back drawer box parts. These notches are for the side drawer box boards to sit in. See Figure 3 for guidance. The notches can be made on the table saw. You should dry fit the drawer parts together to make sure they fit well. Make adjustments as necessary. Our Home from Scratch LLC Page 10
11 Figure 3: Notches for Drawer Box Front and Back Boards Plywood Boxes Machining the plywood boxes will require adding 3/4 grooves in a few places but first we ll start with the toe kicks. Using a pencil, mark 3-1/2 in from the bottom and 3-1/2 from the front corner of one of the sides. This box will be for the toe kick and can be removed using a circular saw and a handsaw. Repeat this on the other side board. Next, you ll need to add a 3/4 wide by 3/8 deep groove 4-1/4 up from the bottom of one of the sides. A second groove will go down the length of the side board 1/4 in from the back. These grooves should be located on the inside facing surface. Repeat these grooves on the other side board, but make them mirror image to the first. By that I mean you need to have a left and a right box side and not two lefts or two rights. See Figure 4 for guidance on where to locate the grooves. Our Home from Scratch LLC Page 11
12 Figure 4: Box Side Board Left Side The back board will need one 3/4" wide by 3/8 deep groove 4-1/4 up from the bottom edge. See Figure 5 for that image. The bottom board won t need any modifications. Our Home from Scratch LLC Page 12
13 Figure 5: Back Board Assembly: Using wood glue and 1-1/4 long pocket screws, assemble the face frame as per Figure 1. Make sure the Vertical Divider is located at the midpoint of the frame. For the box assembly, dry fit the box components together first before gluing the assembly together. The sides can be stood upright, while the back is inserted into the grooves in each side. You can then insert the bottom board into the grooves in the sides. The bottom board should fully seat into the groove in the back board and will be 1/4" recessed from the front edges of the sides. Use clamps to help you keep the assembly together during dry fit. If everything fits together well without glue, you can disassemble it and glue it together. Liberally apply a bead of wood glue into each groove before you reassemble. You can shoot in a 3/4" long brad nail at an angle into the joints to Our Home from Scratch LLC Page 13
14 keep the assembly together while you are clamping it up. Make sure to clamp the assembly in multiple spots as you go. At this point, you can also glue the face frame to the box assembly and clamp both units together by applying a liberal bead of glue in the face fame groove. Check to ensure the top of the face frame and the top of the box assembly are flush. It might help to position the cabinet upside down on a workbench to ensure they remain flush. Measure the cabinet from diagonal to diagonal at the top of the cabinet to verify the cabinet is square. If it s out of square, use a long clamp over the longer corners and tighten it down until it comes into square. Keep the cabinet clamped together overnight to make sure the glue cures properly. Dry fit and assemble the drawer box in a similar manner. When gluing together, you don t need to put glue in the 1/4 groove for the drawer bottom. The glue should only be applied to where the sides meet the front and back boards. You ll also need to use a couple brad nails at each joint to keep it together. A dovetail joint would be best here, but that s a more advanced technique that requires more equipment and training. Instead, these brad nails and glue should hold up fine under average use. The doors will go together similarly. Only apply glue to the tongues. You don t need to glue the center panel in, but you can if you want to since it s plywood. Make sure the stiles ends are flush to the rails and clamp together overnight. Once the cabinet has been completely glued up, you can install the drawer runners to the cabinet and the runner hardware to the drawer boxes. If you re using Blum Tandem runners, follow the instructions posted here: - ASSEMBLY0. You ll need to add blocking to the inside of the cabinet box near the drawer space to bring the surface flush with the edges of the face frame. The drawer runners can then be screwed into that blocking. More detailed instructions can be found at the Blum link above. Our Home from Scratch LLC Page 14
15 The shelf front board can be attached to the plywood shelf board using glue and brad nails. For the door hinges, it s best to simply follow the manufacturer s instructions provided with the hinges you purchase as they vary from manufacturer to manufacturer. The doors should be installed temporarily to ensure fit and functionality then removed for finishing. The drawer front should be attached to the drawer box temporarily using a clamp to hold it in place. Once it s positioned correctly, two screws from inside the cabinet box can be driven into the drawer front. After installation, remove the drawer front for finishing. Finishing: Before painting or staining, sand every surface lightly using 120-grit sandpaper. Sand every surface again using 220-grit sandpaper and then wipe clean with a clean rag. You can use a tack cloth and a rag with denatured alcohol as well. If you want to paint your cabinet, you should apply two coats of a primer followed by two coats of your finish paint. It s best to spray both applications using an HVLP gun. You can use a shellac-based primer like BIN and a satin lacquer for the final coat. If spraying your paint is not an option, you can use a brush to apply your paint. Read more here about best practices and products for painting cabinets: If you plan to stain your cabinet, apply a pre-stain conditioner first to avoid blotches. Follow that with your stain and then either a clear coat lacquer as a topcoat or satin polyurethane. You should generally avoid anything glossier than satin or eggshell. Our Home from Scratch LLC Page 15
16 For your drawer boxes, don t paint or stain them. You can apply a few thin coats of polyurethane to make sure they don t stain from use. After the finishing process is complete, you can re-assemble your cabinet permanently by re-installing the doors and the drawer front. Resources That s it. If you find any errors, have any suggestions for improvement or any questions, drop me a line at John@ourhomefromscratch.com Thanks and good luck!! Our Home from Scratch LLC Page 16
17 4x8 Plywood Panel Cutsheet Our Home from Scratch LLC Page 17
18 2x4 Plywood Panel Cutsheet Our Home from Scratch LLC Page 18
19 1/2 Thick Door Panel Plywood Cutsheet Our Home from Scratch LLC Page 19
Kitchen Base Cabinet: Multiple Drawers Cabinets from Scratch
Kitchen Base Cabinet: Multiple Drawers by Cabinets from Scratch Our Home from Scratch LLC Page 1 Disclaimer Our Home from Scratch LLC and its legal owners cannot be held responsible for any loss, damage,
More informationKitchen Upper Cabinet: Single Door Cabinets from Scratch
Kitchen Upper Cabinet: Single Door by Cabinets from Scratch Our Home from Scratch LLC Page 1 Disclaimer Our Home from Scratch LLC and its legal owners cannot be held responsible for any loss, damage, disappointment,
More informationKitchen Upper Cabinet: Double Doors Cabinets from Scratch
Kitchen Upper Cabinet: Double Doors by Cabinets from Scratch Our Home from Scratch LLC Page 1 Disclaimer Our Home from Scratch LLC and its legal owners cannot be held responsible for any loss, damage,
More informationMedia Center Woodworking Plans Our Home from Scratch
Media Center Woodworking Plans by Our Home from Scratch Our Home from Scratch LLC Page 1 Disclaimer Our Home from Scratch LLC and its legal owners cannot be held responsible for any loss, damage, injury
More informationShoe Organizer Plans Our Home from Scratch
Shoe Organizer Plans by Our Home from Scratch Our Home from Scratch LLC Page 1 Disclaimer Our Home from Scratch LLC and its legal owners cannot be held responsible for any loss, damage, injury or death
More informationModern Farmhouse Printer Cabinet. Addicted2DIY.com
Modern Farmhouse Printer Cabinet Addicted2DIY.com Before beginning this project please read through all of the plans as well as the blog post associated with this project. Always use safety precautions
More informationHow to Build a Recessed Medicine Cabinet
How to Build a Recessed Medicine Cabinet See post for install info http://www.hertoolbelt.com/recessed-medicine-cabinet/ Materials 6 Inset Cabinet Door Hinges 3 Latches 1 sheet Beadboard or 1/4 plywood
More informationPlans. Easy-to-Build Full-size Deluxe Murphy Bed Plan. For more plans, tools and hardware visit rockler.com
Easy-to-Build Full-size Deluxe Murphy Bed Plan Build a full-size Deluxe Murphy Bed complete with decorative molding and matching side cabinets! Plans For more plans, tools and hardware visit rockler.com
More informationJeff Branch WOODWORKING YOU CAN BUILD A. By adding subtle design elements, a traditional furniture style becomes decidedly modern.
Jeff Branch WOODWORKING YOU CAN BUILD A By adding subtle design elements, a traditional furniture style becomes decidedly modern. Jeff Branch WOODWORKING Publisher: Jeff Branch Editor: Jeff Branch Art
More informationAmerica s leading woodworking authority To download these plans, you will need Adobe Reader installed on your computer. If you want to get a free copy, visit: http://adobe.com/ reader. Having trouble downloading
More informationYou Can Build a Bedside Table
You Can Build a Bedside Table Jeff Branch WOODWORKING If you like making panels, you ll love this project. By JEFF BRANCH M y current home is a modest one. But it is a big improvement over our small starter
More informationKreg Tool Co. All Rights Reserved.
Version 1 p. 1 Materials: Lumber: Qty: Board 2 2x2s 3 ft. long 2 1x2s 8 ft. long 2 1x3s 8 ft. long 6 1x6s 10 ft. long INSTRUCTIONS: Supplies: 1 1 / 4" Kreg Screws (coarse thread for softwoods, fine thread
More informationDress up your dining room with this Southern delicacy. that was used to serve drinks after a hunt. Breeches and jodhpurs are optional.
Dress up your dining room with this Southern delicacy that was used to serve drinks after a hunt. Breeches and jodhpurs are optional. Huntboard Classic Six-Legged My dad has been making this six-legged
More informationMODERN BED FRAME ROCKLER BUILD IT WITH BUILD SIMPLIFY CUSTOMIZE. Plan Value $14.99
BUILD Stock # Item 63446 Baltic Birch Plywood /2" x 24" x 30" (2 qty) Stick veneer - Maple 24" x 96" 3/8" Dowels - Birch Bed Connector Hardware I-Semble Platform Bed Frame - Queen 3/8" Beadlock Basic Starter
More informationENJOY THIS SELECTION FROM. Woodworking 101. Includes Step-by-Step Instructions for 8 Projects. Woodworking
W ENJOY THIS SELECTION FROM Woodworking 101 Includes Step-by-Step Instructions for 8 Projects Woodworking 101 Aimé Fraser, Matthew Teague, and Joe Hurst-Wajszczuk To purchase your copy of Woodworking 101,
More informationHudson Dresser [1] Hudson Dresser Published on Ana White ( Submitted by dan-k [2] on Fri, :43 [1]
[1] Submitted by dan-k [2] on Fri, 2011-03-11 11:43 [1] If you plan on staining this piece, it is recommended that you stain all of the drawer face materials before assembly for a more professional look.
More informationIndustrial Cart. Materials. With High Style Restyle
1 Industrial Cart With High Style Restyle Materials 1 sheet 3/4" plywood 1-1" x 2" x 8' board 2-1" x 3" x 8' board 1-2" x 8" x 10' board 1-2" x 6" x 8' board 3-1/4" x 2 1/2" x 4' poplar hobby boards, or
More informationDIY Farmhouse Cabinet
DIY Farmhouse Cabinet Addicted2DIY.com *Before beginning this project, please read through all of the plans as well as the blog post associated with this project. Always use safety precautions whenever
More informationClassic Kitchen Island
America s leading woodworking authority Step by Step construction instruction. A complete bill of materials. Classic Kitchen Island Exploded view and elevation drawings. How-to photos with instructive
More informationProject 17884EZ: Shaker End Table
Project 17884EZ: Shaker End Table With its clean, simple lines, this piece is unmistakably Shaker style. Ours is made from cherry, a wood commonly used by Shaker craftsman, but we ve also seen this piece
More informationProject 11010EZ: Gun/Bookcase/Curio Cabinet
Project 11010EZ: Gun/Bookcase/Curio Cabinet No man can be all things to all people, but this cabinet comes as close to fitting multiple uses as any inanimate object can. We ve pictured it as a gun cabinet
More informationPROJECT PLAN OUTFEED TABLE
BUILD IT WITH ROCKLER PROJECT PLAN OUTFEED TABLE BUILD Stock # Item 00 ' Universal T-Track () 0 T-Track Intersection Kit 70 JIG IT Universal Drawer Slide Jig 0 " Drawer Slides () 77 Auto-Adjust Jig Clamp
More informationPerformance Rating Scale: Limited Skills... Moderate Skills..High Skills
PERFORMANCE STANDARD EVALUATION CHECKLIST Student Name Instructor s Name School District Performance Rating Scale: 1 2 3 4 5 6 7 8 9 10 Limited Skills..... Moderate Skills..High Skills Performance assessments
More informationMaking a Massive Bookcase Step-by-Step
Making a Massive Bookcase Step-by-Step Jeff Branch WOODWORKING The only thing challenging about this project is its huge size. By JFF BRANCH A t right is a rendering of my first woodworking project completed
More informationCABINETRY Assembly Instructions
www.hdicabinetry.com Assembly Instructions TABLE OF CONTENTS Category Page(s) Section 1: Framed Series Base Cabinet Instructions Wall Cabinet Instructions Easy Reach Cabinet Instructions 1.01-1.04 1.05-1.06
More informationEntrance Cabinet Plans
Entrance Cabinet Plans www.andrewharriswoodwork.com Page 1 of 19 Introduction I have tried to ensure all steps are covered in these plans but if you find any errors in the plans or have a question then
More informationProject 12231EZ: Country Curio Clock
Project 12231EZ: Country Curio Clock This good-looking clock not only reminds you of the time, it also provides a couple of shelves to display favorite curios. No fancy joinery is needed here, just butt
More informationProject 11355EZ: Wall Cabinet with Louvered Doors and Shelf
Project 11355EZ: Wall Cabinet with Louvered Doors and Shelf This Early American style cabinet will look good in any room, although it seems particularly well suited for the kitchen or bathroom. To make
More informationTotal Test Questions: 74 Levels: Grades Units of Credit:.50. Identify career opportunities in the furniture and cabinetmaking industries.
DESCRIPTION Furniture Design and Manufacturing (522) is the second instructional course in a sequence that prepares students to apply technical knowledge and skills to prepare and execute furniture design
More informationDIY Wine Storage Cabinet
DIY Wine Storage Cabinet ADDICTED2DIY.COM *Before beginning this project, please read through all of the plans and the blog post. When building this project, be sure to measure your wood and cut to fit.
More informationPivot-Door Downdraft Cabinet Plans
Pivot-Door Downdraft Cabinet Plans Finished Cabinet Closed Open Exploded View Introduction This simple downdraft-style dust collection cabinet is a great way to keep your shop cleaner and keep your router
More informationDIY Rustic Dresser Addicted2DIY.com
DIY Rustic Dresser Addicted2DIY.com *Before beginning this project, please read through all of the plans as well as the blog post associated with this project. Always use safety precautions whenever using
More informationWAYNESBORO AREA SCHOOL DISTRICT CURRICULUM MATERIALS AND MANUFACTURING IV
UNIT: Safety NO. OF DAYS: 20 KEY LEARNING(S): Safe and proper use of tools and machines UNIT : How do I safely work in materials and manufacturing lab & How to apply machines and tools? 3.4.10. D2. Diagnose
More informationDIY Full-Size Captain s Bed with Storage. Addicted2DIY.com
DIY Full-Size Captain s Bed with Storage Addicted2DIY.com Before beginning this project Please read through all of the plans as well as the blog post associated with this project. Always use safety precautions
More informationThis is a solid wood cabinet. The only plywood used is for the back and drawer bottoms.
Sideboard Sideboard Overview: This project requires basic woodworking skills and access to woodworking machines. Woodworking machines have sharp cutting edges and are NOT forgiving. You should be properly
More informationCopyright WilkerDos.com Dining Table. Project Designed By April Wilkerson - Plan Created By Jay Bates (jayscustomcreations.
Copyright WilkerDos.com 2017 Project Designed By April Wilkerson - Plan Created By Jay Bates (jayscustomcreations.com) Layout & Shopping List Page 2 of 12 Layout & Shopping List Item Quantity Description
More informationCopyright 2010 Springbok Publishing All Rights Reserved- Page 1
Copyright 2010 Springbok Publishing All Rights Reserved- www.woodensaddlerackplans.com Page 1 Legal Information All contents copyright 2010 by Springbok Publishing. All rights reserved. No part of this
More informationCabinetmaking & Millwork CIP Task Grid
1 Secondary Task List 100 DEMONSTRATE PERSONAL SAFETY. 101 Demonstrate knowledge of general safety rules for working in the cabinetmaking lab. 102 Identify cabinetmaking lab tools and equipment. 103 State
More informationThe WoodWorker s Edge
The WoodWorker s Edge Draw-leaf Game Table 1. 2. Layout the area for the tenons. The tenons are 3/8 thick x 4-1/2 long x 1-1/4 deep and offset to the inside. Create the tenons using the step method to
More informationTotal Test Questions: 74 Levels: Grades Units of Credit:.50
DESCRIPTION The third in a sequence of assessments, Cabinetmaking prepares students to apply technical knowledge and skills to set up and operate industrial woodworking machinery and to use such machinery
More informationWorld. Old. Dining Table YOU CAN BUILD AN
YOU CAN BUILD AN Old World Dining Table This design combines heavy oak timbers with period specific elements. The result brings an old world look to a modern sized dining table. Publisher: Jeff Branch
More informationGrade 11 Woods Lift Lid Coffee Table. Based on Under the big Top from Popular Mechanics Website
Grade 11 Woods Lift Lid Coffee Table Based on Under the big Top from Popular Mechanics Website TABLE TOP 1. Select enough lumber to construct a top that is between 22 ½ and 24 wide after jointing. Ensure
More informationThis indicates a diagram detailing the dimensions of a project part and/or the placement for pocket holes, screws, nails, etc.
S i m p le Woodworking: What You'll Need v lumber 2-1 x 12 x 6 hardware/supplies (availability will vary) 1 1/4" pocket hole screws #18 x 1 1/2 brads or pocket hole plugs 12-inch continuous hinge magnetic
More informationPROJECT PLANS MULTIPURPOSE WORK CENTER
R PROJECT PLANS MULTIPURPOSE WORK CENTER This handy project can provide the work space you need anywhere in your home. Whether you need that work space in the shop, the garage, the basement, or in a laundry
More informationProject 13586EZ: Writing Desk. Writing Desk Materials List
Project 13586EZ: Writing Desk This writing desk will make a handsome addition to just about any room in the house. The one shown is made of cherry, a logical choice for a piece like this, but mahogany
More informationNEXUS SERIES CABINETS
NEXUS SERIES CABINETS STANDARD BASE ASSEMBLY INSTRUCTIONS Also applies to: Galaxy Series, Nexus Series, Ridgeline Series, Statesman Series, and Waterford Series FOR YOUR INFORMATION: These assembly instructions
More informationMudroom Unit. Page 1 of 25
Mudroom Unit www.andrewharriswoodwork.com Page 1 of 25 Introduction This plan makes a unit which is 66 ¾ inches tall, 39 ½ inches wide and 18 ½ inches deep. It was custom made for some friends to fit the
More informationWorld. Old. Dining Table YOU CAN BUILD AN
YOU CAN BUILD AN Old World Dining Table This design combines heavy oak timbers with period specific elements. The result brings an old world look to a modern sized dining table. Publisher: Jeff Branch
More informationBUILDING A STORM DOOR
BUILDING A STORM DOOR BY NEAL BARRETT Illustrations by George Retseck If you're in the market for a storm door, you probably know that there are many styles and models available. However, most of them
More informationDisplay Case (for J&S)
Display Case (for J&S) This is constructed of maple plywood with solid maple (soft maple) edge banding. It was made to fit between a door and a kitchen cabinet, and has an elegant circular taper between
More informationleaf table Leaves dropped, this traditional oak table makes an ideal kitchen island. Leaves extended, it s a small breakfast table
leaf table Leaves dropped, this traditional oak table makes an ideal kitchen island. Leaves extended, it s a small breakfast table The drop-leaf table is a traditional favourite, but the one I ve designed
More informationPatrol Box Plans by David J. Yarusso Troop 609
Patrol Box Plans by David J. Yarusso Troop 609 Materials List: 1. One 4 x8 sheet of ½ thick cabinet grade (birch or oak) or AC plywood. If using AC grade, use the A grade surface on the outside for a clean
More informationCOMPLIMENTARY WOODWORKING PLAN
COMPLIMENTARY WOODWORKING PLAN Bookcase This downloadable plan is copyrighted. Please do not share or redistribute this plan in any way. It has been created for Wilton Tools, a division of WMH Tool Group.
More information129 KITCHEN BASE CABINET 480
129 KITCHEN BASE CABINET 480 There are two sorts of kitchen cabinets: base cabinets, which sit on the floor, and wall cabinets. Base cabinets provide both storage space and work surfaces. They often house
More informationSilverware Chest Plan
Silverware Chest Plan 05L14.01 Introduction 1. Measure the space required for your cutlery before beginning this project to be sure that it will fit in the drawers and top compartment. The best way to
More informationCabinetmaking & Millwork CIP Task Grid
1 Secondary Task List 100 FOLLOW RULES FOR WORKING IN THE CABINETMAKING LAB. 101 Review and discuss school rules. 102 Review and demonstrate knowledge of cabinetmaking lab rules. 103 Complete all theory
More information136 PLYWOOD DESK 522
136 PLYWOOD DESK 522 Simple in design and inexpensive, this plywood desk is made from a single 4- x 8-foot panel. Plywood is available with many hardwood veneers; it can also be covered with plastic laminate,
More informationHarriet Chair with Modifications
Harriet Chair with Modifications This modification of the Harriet chair includes a slat back, padded seat, and is 2 inches wider than the original plan. The overall dimensions of the finished chair: 38
More informationPROJECT PLANS WOODEN GIFT BOX
PROJECT PLANS WOODEN GIFT BOX Make the gifts you give even more special by presenting them in this one-of-a-kind gift box. In fact, the box may be valued more than whatever it contains. The box is sized
More informationPULLOUT SHELF ROCKLER BUILD IT WITH BUILD CUSTOMIZE
BUILD Stock Item 12229 Drawer s, 2 1 2" x 48" 63420 Baltic Birch Ply, 1/4" x 24" x 30" 38742 Maple, 3/4" x 3" x 24" 45953 100# Zinc Over-Travel Drawer Slides - Centerline 757-20" 30254 #8 x 1 1 4" Square
More informationULTIMATE ROUTER TABLE PLANS. By Dan Phalen
ULTIMATE ROUTER TABLE PLANS By Dan Phalen January 2017 Ultimate Router Table Plans. Copyright 2012-2017 by Daniel Phalen. Published by Creston Hall Publishing Company. All rights reserved. No part of this
More informationantebellum home in Eutaw, Alabama, built in 1860 (Google it for photos).
You Can Build the Kirkwood Bookcase By Jeff Branch A vid readers will tell you they often need a new way to store all of their books. I ve seen some pretty creative ways to stockpile books - in some instances
More informationKnockdown Bookcase. This slant-sided bookcase was a popular mail-order item in the early 1900s.
Knockdown Bookcase This slant-sided bookcase was a popular mail-order item in the early 1900s. The Arts & Crafts movement was part of an interesting social change in America the advent of mail-order purchases.
More informationMedia Console Table 38"
Copyright 2016 Shanty-2-Chic.com Media Console Table A sleek, modern take on a traditional concept; this console table is as stylish as it is functional and you'll have it done in a weekend. And versatile
More informationDresser. Materials & Tools FEATURING FORMALDEHYDE-FREE TECHNOLOGY. Free Plans to build a Dresser
Free Plans to build a Dresser Materials & Tools Materials: 1-1/4 pocket hole screws 1-1/4 brad nails 3 sets of 18 drawer slides Drawer pulls Edge banding, optional Wood glue Sandpaper (100, 150, 220 grits)
More informationJewelry Cabinet. Materials: 5/8" brad nails 5-1" x 3" x 8' boards (or if not 2 1/2" wide. 1-4' x 8' sheet - 3/4" plywood. wood glue get 1x4's)
1 Jewelry Cabinet Materials: 1-4' x 8' sheet - 3/4" plywood 5/8" brad nails 5-1" x 3" x 8' boards (or if not 2 1/2" wide wood glue get 1x4's) sand paper 1-1" x 6" x 8' board wood filler 1/2 sheet - 3/16"
More informationMaterials and Tools: Printer s Triple Console Cabinet. Free Plans to build a Triple Console Cabinet
Materials and Tools: Materials: 3 sets euro style bottom corner mount drawer slides, 16 length 3 sets inset hinges 24 cup style handles 8 2x2 @ 8 feet long 6 1x3 @ 8 feet long 6 1x2 @ 8 feet long 1 sheet
More informationARTS AND CRAFTS CHAIR
ARTS AND CRAFTS CHAIR 491 MATERIALS LIST--DINING CHAIR Key No. Size and description (use) A 2 1-3/4 x 1-3/4 x 16-1/4'' oak (front leg) B 2 1-3/4 x 3-3/4 x 40-1/2'' oak (rear leg) C 1 1-3/4 x 3-3/16 x 15''
More informationDOWNLOAD PDF HOW TO BUILD KITCHEN CABINETS, ROOM DIVIDERS, AND CABINET FURNITURE
Chapter 1 : How To Build Kitchen Cabinets Room Dividers Furniture Donald Brann DIY ebay How to Build Kitchen Cabinets, Room Dividers, and Cabinet Furniture [Donald R. Brann] on blog.quintoapp.com *FREE*
More informationWOOD MANUFACTURING 30
WOOD MANUFACTURING 30 Description This course is designed to introduce to the student the processes and techniques of leg and rail construction. Student skills will be developed through tool and machine
More informationChief s Shop: Simple Woodworking Bench
Chief s Shop: Simple Woodworking Bench Be sure to read the instructions and review the illustrations and accompanying video for this project BEFORE you start. Follow ALL SAFETY GUIDELINES AND RECOMMENDATIONS
More informationPLANS BY KELLEY FARMHOUSE DESIGNS LOFTED DORM ROOM BED
PLANS BY KELLEY FARMHOUSE DESIGNS LOFTED DORM ROOM BED DIMENSIONS: 82" X 70" X 45" DIFFICULTY LEVEL: INTERMEDIATE TOOLS REQUIRED ONE+ Circular Saw ONE+ AirStrike 16GA Finish Nailer ONE+ Impact Driver ONE+
More information1 ¼-inch Pocket Screws Brad Nailer or Hammer 1 ¼-inch Brad Nails Clamps
MATERIALS: TOOLS: (4) 2 x 6 x 8 Ft. Boards Tape Measure (2) 2 x 4 x 8 Ft. Boards Carpenter s Square (7) 1 x 4 x 8 Ft. Boards Pencil (2) 1 x 3 x 8 Ft. Boards Drill (1) Half Sheet of ¾-inch Thick Plywood
More informationrmoire Materials Hardware
A rmoire No house ever has enough storage space, and I built this armoire to satisfy a couple of needs. Inside the armoire is a shelf large enough for the television. Under the shelf are six drawers that
More informationI I. . i1 AD JUSTABLE SHELVES
ADJUSTABLE SHELVES HAD BEEN TRYNG TO WORK out a really simple (read "fast") way to make an elegant wooden version of the old standby, metal standards and brackets. Although have seen many commercial versions
More informationWhile creating a two-wall
Ready-To-Assemble Cabinets Outfit your shop in a weekend or less. By Gary Lombard with Jim Harrold 32 woodcraftmagazine.com Aug/Sept 2013 While creating a two-wall or larger shop (or a kitchen, for that
More informationChest of Drawers Plans
Chest of Drawers Plans www.andrewharriswoodwork.com Page 1 of 15 Introduction This plan makes a chest of drawers that is 50 inches at the widest point, 19 inches deep and 40.75 inches high. I have tried
More informationYOU CAN BUILD THE JACKSON DRESSER. Combining traditional styling with rustic materials leads to a classic, yet casual look.
YOU CAN BUILD THE JACKSON DRESSER Combining traditional styling with rustic materials leads to a classic, yet casual look. Jeff Branch CONTENTS Jeff Branch Publisher: Jeff Branch Editor-in-Chief: Jeff
More informationBathroom Storage Unit. Wilkerdos.com
Bathroom Storage Unit Wilkerdos.com Copyright 2015 Material List Quantity Item Notes 1 4 x 8 x 3/4 plywood Construction grade 1 2 x 4 x 1/2 plywood Construction grade 11" 7-1/2" Page 1 Some 1 1/4" brad
More informationPROJECT PLANS EXPANDABLE CRAFT CENTER
R PROJECT PLANS EXPANDABLE CRAFT CENTER Whether you re working on craft projects, sewing, or pursuing another hobby, this craft center offers a great place to work. It features a large work surface that
More informationPerkins Statewide Articulation Agreement. Documentation item: Secondary Competency Task List Coversheet
Perkins Statewide Articulation Agreement Documentation item: Secondary Task List Coversheet The Secondary School agrees to: A. Implement the approved PDE Program(s) of Study. B. Provide assessment of student
More informationChapter 22 - Cabinets & Vanities
Chapter 22 - Cabinets & Vanities Contents Chapter 22 - Cabinets & Vanities... 22-1 Timing & Prerequisites... 22-2 Cabinets... 22-3 Cabinet Layout... 22-3 Wall Cabinets... 22-4 Assemble the Wall Units...
More informationMultiple Category Scope and Sequence: Scope and Sequence Report For Course Standards and Objectives, Content, Skills, Vocabulary
Multiple Category Scope and Sequence: Scope and Sequence Report For Course Standards and Objectives, Content, Skills, Vocabulary Wednesday, August 20, 2014, 2:27PM District Basic Woodworking (48.0701)
More informationAbout.com :
http://woodworking.about.com/gi/dynamic/offsite.htm?sit...//www.popularwoodworking.com/features/fea.asp%3fid=1088 (1 of 8)1/28/2004 12:05:01 AM Modern Storage Tower The last thing I want to do when starting
More informationMaterials. Special Tools and Techniques Chisel Long pipe clamps Miters Router with 1/2" rabbet cutter Rabbets Dadoes. Hardware
D esk Our executive desk was built with specific needs in mind. We wanted a large desktop, large drawers, and a cubbyhole to house a rollaway hanging file cabinet. We are thrilled with our finished project.
More informationKitchen Step Stool. Premium Plan. In this plan you ll find: America s leading woodworking authority
America s leading woodworking authority Premium Plan In this plan you ll find: Step-by-step construction instruction. A complete bill of materials. Construction drawings and related photos. Tips to help
More informationThis tailor s cabinet was brought to my attention by a customer
So what if you don t sew? This authentic Shaker case piece is drop-dead gorgeous in any room. This tailor s cabinet was brought to my attention by a customer who wanted one just like it. She had seen the
More informationProject 13519EZ: Shaker Sewing Desk
Project 13519EZ: Shaker Sewing Desk This fine example of a Shaker sewing desk was measured and photographed at Hancock Shaker Village in Hancock, Massachusetts. On the original, the legs and various frame
More informationTools: Drill/Driver Kreg Jig Miter Saw Jigsaw Circular Saw Adjustable Square Tape Measure Veneer Trimmer Sandpaper and Sander
R PROJECT PLANS DROP-FRONT DESK Create a workspace almost anywhere with this drop-front desk. Mounted to a wall, it doesn t take up any floor space, which means you can hang it wherever you need to work.
More informationButterfly Leaf Dining Table Plans
Butterfly Leaf Dining Table Plans Part 1 An attractive dining table with a secret: the leaf folds and stores inside the table. Season 1, Episode 7 P a g e 2 I first saw a butterfly leaf table in a back
More informationPOS Perkins Statewide Articulation Agreement Documentation Coversheet
POS Perkins Statewide Articulation Agreement Documentation Coversheet Student Name: Secondary School Name: Secondary School Address: CTE Program of Study: CIP # CIP Program Name Grade 9 1. CAREER AND TECHNICAL
More informationCorner Cupboard. This space-saving piece enhances any room 46 FINE WOODWORKING
Corner Cupboard This space-saving piece enhances any room BY G A R R E T T H A C K On every trip to the Shelburne Museum near Burlington, Vt., I visit a favorite object a small hanging corner cabinet.
More informationDOCUMENT CHEST. Curly Maple, White Pine
25 DOCUMENT CHEST Curly Maple, White Pine 100 MAKING THE DOCUMENT CHEST After the stock has been thicknessed, ripped to width, and cut to length, plough a 1/4" X 3 /8" groove on the inside faces of the
More informationEco Office File Base. Materials and Tools: Free Plans to build an office file cabinet base
Materials and Tools: Materials: 1 - Sheet 3/4 PureBond Hardwood Plywood (Available at the Home Depot) 1 - Sheet 1/4 PureBond Hardwood Plywood (Available at the Home Depot) 3-21 Drawer Slides, Euro Style
More informationThe Q Frame PROJECT. a picture frame with secrets created exclusively for the Router Forum
The Q Frame PROJECT a picture frame with secrets created exclusively for the Router Forum 007 OR RELEASE FPLANS APPROVED The Q Frame: Project Overview LIST OF MATERIALS Frame Sides & Face 3/4 x 5 1/2 x
More informationClassic Storage Wall Side Base Units [1]
[1] Submitted by Ana White [2] on Thu, 2010-01-21 00:18 [1] Summary: All the beauty and functionality of expensive built-ins, but none of the cost or limitations. Build this base cabinet to keep your media
More informationKitchen Island. By Rob Joseph Leg Dimensions. Drawer Exploded View. Leg Glue-Up
Kitchen Island y Rob Joseph eg imensions Step 1 - ut the legs () slightly longer than the dimensions given in the material list. or the thickness we need, the legs are cut from a piece of 11 2"-thick stock,
More informationHOW TO INSTALL ELITE PANELED WAINSCOTING Using X-Rails with Either Raised, Flat or Beaded Panels
HOW TO INSTALL ELITE PANELED WAINSCOTING Using X-Rails with Either Raised, Flat or Beaded Panels 1. First, remove the cover plates from all electrical outlets. All baseboards should also be removed; the
More informationKentucky 4H Wood Science Plans Notebook. Plans Level 2
Kentucky 4H Wood Science Plans Notebook Plans Level 2 MATERIALS NEEDED: JEWELRY BOX WS201 1 piece wood 1/4" x 4 x 4 1/2" (bottom) 1 piece wood 1/4" x 4 1/2" x 5 (top) 2 pieces wood 1/4" x 2 x 5 (front
More informationTongue & Groove Cabinet Doors Copyright 2014 JaysCustomCreations.com
Tongue & Groove Cabinet Doors Copyright 2014 JaysCustomCreations.com A tongue and groove cabinet door is made up of at least 5 pieces. Two horizontal rails (blue), two vertical styles (green), and one
More information