NÜVO CABINET HARDWARE
|
|
- Anabel Hoover
- 6 years ago
- Views:
Transcription
1 NÜVO HINGES DRAWER SYSTEMS ACCESSORIES CABINET HARDWARE
2 HINGES NÜVO 8mm Dowels Screw-in S Self-Close 11 mm Ø 8 mm Ø 35 mm 110 NÜVO Hinge cover Code Price: 5 each (250 per box) 60 mm 45 mm NÜVO 9.5 mm SPECIAL - Get your hinge covers for free when you buy a box! FULL OVERLAY CO-1517 S S * RECOMMENDED SCREW NÜVO FLAT HEAD #6 HALF OVERLAY CO-1514 S INSET CO-1512 S FULL OVERLAY ADJ-2017 WITH CAM S H HAR L T D K H=5+K-D T HALF OVERLAY ADJ-2014 WITH CAM S INSET ADJ-2012 WITH CAM S HINGES NÜVO TM HARDWARE 1 HINGES
3 NÜVO HINGES 8mm Dowels Screw-in S/C Soft-Close 11 mm 105 NÜVO Hinge cover Ø 8 mm Ø 35 mm 60 mm 45 mm Code Price: 5 each (250 per box) NÜVO 9.5 mm SPECIAL - Get your hinge covers for free when you buy a box! FULL OVERLAY SC-4717 S/C S/C HALF OVERLAY SC-4714 S/C S/C INSET SC-4712 S/C S/C mm Dowels S Self-Close NÜVO Hinge cover Code ANGLE CO-2314 S mm Dowels S Self-Close NÜVO Hinge cover Code ANGLE CO-2313 S mm Dowels Screw-in PIE-CUT CORNER Code Box HINGES PLATE AJ NUVO D20I1JO Code Box PLATE AJ NUVO D20I1J Code Box HAR HINGES 2 NÜVO TM HARDWARE
4 HINGES NÜVO 8mm Dowels S Self-Close S/C Soft-Close 11 mm Ø 8 mm Ø 35 mm mm 45 mm NÜVO 9.5 mm SPECIAL - Get your hinge covers for free when you buy a box! FULL OVERLAY CO-3117 S HALF OVERLAY CO-3114 S INSET CO-3112 S FULL OVERLAY SC-B-3127 S/C Mounting plates for NÜVO hinges Euro screw Screw-in MOUNTING PLATE FOR SELF-CLOSE HINGES Code Box Screw-in Euro NO SCREWS INCLUDED HAR EURO SCREWS INCLUDED MOUNTING PLATE FOR SOFT-CLOSE HINGES Code Box Screw-in Euro Recommended Screw NÜVO Flat Head #6 HINGES NÜVO TM HARDWARE 3 HINGES
5 NÜVO HEIGHT: 1-1/2 COLOUR: WHITE NÜVO HIGH QUALITY EPOXY DRAWER SLIDE Material: Cold rolled steel, epoxy coated Packaging: 25 pairs per box 3/4 extension self-closing drawer slide 32mm mounting hole pattern 75lb./34kg load rating Simple innovative design Side clearance: ½ (12.7mm) plus 1/32 minus 0 clearance each side 50,000 cycles test certified NÜVO HIGH QUALITY EPOXY DRAWER SLIDE Code Length Colour White White White White White Installation Dimensions *All measurements are in millimeters. Recommended Screw NÜVO Flat Head #6 HAR NÜVO TM HARDWARE
6 NÜVO LOAD CAPACITY: 100LB./ 45KG FULL EXTENSION BALL BEARING SLIDE Packaging: 10 pairs per box Full extension ball bearing drawer slide 32mm hole pattern with breathing tabs 100lb./45kg load rating Positive stop for fully extended drawers Side clearance: ½ (12.7mm) plus 1/32 Hold-in feature to prevent bounce back Open access design for easy cabinet installation Steel ball bearing movement Lever disconnect for easy drawer removal Finish-Anochrome (ANO) 50,000 cycles test certified Installation Dimensions FULL EXTENSION BALL BEARING SLIDE Code Length Colour Zinc Zinc Zinc Code Length Colour Black Black Black Black HAR *All measurements are in millimeters. Recommended Screws NÜVO Flat Head #6 NÜVO Pan Head #8 5 Drawer length Installation Demonstration 3 Front cabinet Minimum cabinet depth NÜVO TM HARDWARE 5
7 NÜVO LOAD CAPACITY: 100LB./ 45KG SOFT-CLOSE FULL EXTENSION BALL BEARING SLIDE Packaging: 10 pairs per box SOFT-CLOSE FULL EXTENSION BALL BEARING SLIDE Full extension drawer slide with integrated soft-close mechanism 32mm hole pattern with breathing tabs 100lb./45kg load rating Positive stop for fully extended drawer Side clearance: ½ (12.7mm) plus 1/32 Hold-in feature to prevent bounce back Open access design for easy cabinet installation Steel ball bearing movement Lever disconnect for easy drawer removal Finish-Anochrome (ANO) 50,000 cycles test certified Code Length Installation Dimensions Installation Demonstration closed drawer handle *All measurements are in millimeters. Screw locations on the drawer Screw locations on the gable *Installation Note: Screw locations to ensure a better performance. Recommended Screws NÜVO Flat Head #6 NÜVO Pan Head #8 HAR NÜVO TM HARDWARE
8 NÜVO LOAD CAPACITY: 100LB./ 45KG FULL EXTENSION ADJUSTABLE BALL BEARING SLIDE Packaging: 10 pairs per box Full extension innovative adjustable design drawer slide 32mm hole pattern with breathing tabs 100lb./45kg load rating Positive stop for fully extended drawers Side clearance: 1/2 (12.7mm) plus 1/32 Hold-in feature to prevent bounce back Open access design for easy cabinet installation Steel ball bearing movement Lever disconnect for easy drawer removal Finish-Anochrome (ANO) 50,000 cycles test certified FULL EXTENSION ADJUSTABLE BALL BEARING SLIDE Code Length Colour Zinc Zinc Zinc Zinc Zinc Zinc Zinc Zinc Zinc Zinc Code Length Colour HAR Recommended Screws NÜVO Flat Head #6 NÜVO Pan Head #8 *All measurements are in millimeters Black Black NÜVO TM HARDWARE 7
9 NÜVO LOAD CAPACITY: 55LB./ 25KG SOFT-CLOSE FULL EXTENSION BALL BEARING SLIDE Packaging: 10 pairs per box LIQUIDATION SALE WHILE SUPPLIES LAST Full extension drawer slide with integrated smooth closing mechanism 32mm hole pattern 55lb./25kg load rating Positive stop for fully extended drawer Side clearance: ½ (12.7mm) plus 1/32 Hold-in feature to prevent bounce back Open access design for easy cabinet installation Steel ball bearing movement Lever disconnect for easy drawer removal Finish-Anochrome (ANO) 50,000 cycles test certified SOFT-CLOSE FULL EXTENSION BALL BEARING SLIDE Code Length Installation Dimensions 45.6 Installation Demonstration *All measurements are in millimeters. Recommended Screws NÜVO Flat Head #6 NÜVO Pan Head #8 HAR NÜVO TM HARDWARE
10 NÜVO LOAD CAPACITY: 66LB./ 30KG SOFT-CLOSE FULL EXTENTION UNDERMOUNT SLIDE Packaging: 10 pairs per box FRONT CLIPS INCLUDED Full extension smooth closing undermount drawer slide 32mm hole pattern with breathing tabs 66lb./30kg load rating Soft sliding with lateral stability Complete with front locking clips Vertical height adjustment of 3mm without tools Easy mounting and removal 50,000 cycles test certified SOFT-CLOSE FULL EXTENTION UNDERMOUNT SLIDE Code Length Colour Silver Silver Silver Silver Silver Silver Attachment brackets available separately Installation Demonstration HAR Assemble the clips on the bottom of cabinet Assemble the left and right slide on each side of cabinet Pull out the left and right drawer slide Put the drawer on the top of the slides Close the drawer Recommended Screws NÜVO Flat Head #6 NÜVO Pan Head #8 NÜVO TM HARDWARE 9
11 NÜVO Drawer Assembly Dimensions Drawer side Drawer front Gable Bottom of drawer Gable Drawer underside Groove Back of drawer Groove Installation Dimensions *All measurements are in millimeters. Front of unit HAR NÜVO TM HARDWARE
12 12 LOAD CAPACITY: 66LB./ 30KG SOFT-CLOSE FULL EXTENSION UNDERMOUNT SLIDE Packaging: 10 pairs per box NÜVO ADJUSTABLE ±1.5mm ± 1mm HORIZONTAL AND VERTICAL ADJUSTMENTS Full extension smooth closing undermount drawer slide 32mm hole pattern 66lb./30kg load rating Soft sliding with high lateral stability Complete with front locking clips Full vertical and horizontal adjustability Vertical 3mm and horizontal 2mm adjustments without tools Easy mounting and removal 50,000 cycles test certified FRONT CLIPS INCLUDED SOFT-CLOSE FULL EXTENSION UNDERMOUNT SLIDE Code Length Colour Grey Grey Grey Grey Grey Grey Attachment brackets available separately Drawer Assembly Dimensions (A-46) 13~16 HAR Recommended Screws NÜVO Flat Head #6 NÜVO Pan Head #8 L1 L L A A 26.6 view A NÜVO TM HARDWARE 11
13 NÜVO Drawer Assembly Dimensions Drawer side Drawer front Gable Bottom of drawer Gable Drawer underside Groove Back of drawer Groove Installation Dimensions L A *All measurements are in millimeters. view A L1 290 L1 340 L1 390 L1 440 L L L Front of unit HAR NÜVO TM HARDWARE
14 DRAWER SYSTEMS NÜVO LOAD CAPACITY: 75LB./ 34KG EURO NÜVO METAL BOX DRAWER SLIDE Front facing brackets included Packaging: 10 pairs per box LIQUIDATION SALE WHILE SUPPLIES LAST Self-close and 3/4 extension drawer slide Extra smooth operation 75lb./34kg load rating Front facing brackets included in price 50,000 cycles test certified White no dowel EURO NÜVO METAL BOX DRAWER SLIDE - 86MM White with dowels Metallic Silver Length Qty / Box pairs pairs pairs pairs pairs White no dowel EURO NÜVO METAL BOX DRAWER SLIDE - 118MM White Metallic with dowels Silver Length Qty / Box pairs pairs pairs pairs pairs pairs pairs HAR Drawer Assembly and Installation Dimensions White no dowel EURO NÜVO METAL BOX DRAWER SLIDE - 150MM White Metallic with dowels Silver Length Qty / Box pairs pairs pairs White no dowel EURO NÜVO METAL BOX DRAWER SLIDE - 200MM White with dowels Metallic Silver Length Qty / Box pairs pairs pairs pairs FRONT FACE ATTACHMENT WITH DOWEL Code Qty / Box For Heights pairs 86mm / 118mm / 150mm pairs 200mm DRAWER SYSTEMS NÜVO TM HARDWARE 13 DRAWER SYSTEMS
15 NÜVO DRAWER SYSTEMS LOAD CAPACITY: 77LB./ 35KG NÜVO-PRO DOUBLE WALL DRAWER SLIDE SYSTEM Front and back assembly brackets included Packaging: 1 pair per box AJUSTABLE ± 2mm ± 1mm Full extension smooth closing drawer slide 32mm hole pattern 77lb./35kg load rating System from innovative European design Drawer wall height 86mm Soft-sliding with high lateral stability Integrated 3D front adjustment for quick installation and precise alignment Easy mounting and removal 50,000 cycles test certified NÜVO-PRO DOUBLE WALL DRAWER SLIDE SYSTEM Code Sizes Colour x 400mm Silver front-face attachment / screw in x 400mm Silver front-face attachment / with dowels x 450mm Silver front-face attachment / screw in x 450mm Silver front-face attachment / with dowels x 500mm Silver front-face attachment / screw in x 500mm Silver front-face attachment / with dowels x 550mm Silver front-face attachment / screw in x 550mm Silver front-face attachment / with dowels x 400mm White / screw in x 400mm White / with dowels x 450mm White / screw in x 450mm White / with dowels x 500mm White / screw in x 500mm White / with dowels x 550mm White / screw in x 550mm White / with dowels FRONT ATTACHMENT BRACKETS WITH DOWELS - CODE: DRAWER SYSTEMS Accessories (to increase drawer height) Lateral tubes kit Back ties included * C164mm Kit = 2 lateral tubes with brackets * C204mm Kit = 4 lateral tubes with brackets Recommended Screws NÜVO Flat Head #6 NÜVO Pan Head #8 ACCESSORIES (to increase drawer height) Code Dimensions Colour C164 X 400mm Silver C164 X 450mm Silver C164 X 500mm Silver C164 X 550mm Silver C204 X 400mm Silver C204 X 450mm Silver C204 X 500mm Silver C204 X 550mm Silver NÜVO-PRO KITS (to increase drawer height) C164 X 400mm White C164 X 450mm White C164 X 500mm White C164 X 550mm White C204 X 400mm White C204 X 450mm White C204 X 500mm White C204 X 550mm White * ACRYLIC DRAWER SIDES Code Dimensions x 400mm x 450mm x 500mm x 550mm x 400mm x 450mm x 500mm x 550mm * DRAWER SIDE CONNECTORS Code Dimensions Colour mm Silver mm Silver mm White mm White * Drawer sides and drawer side connectors are sold separately. HAR DRAWER SYSTEMS 14 NÜVO TM HARDWARE
16 DRAWERS ACCESSORIES NÜVO NEW INTERIOR STYLE DRAWER SYSTEM FOR THE NÜVO PRO PRODUCT LINE The set is made of front corner brackets (sold by pair) and a silver metal front to be cut to the required width. The front portion is sold as a separate item. These sets will allow your customers to make interior style drawer heights of or 204mm. The silver front metal portion comes in 1100mm lengths which is cut to the required width by your customer. For heights of more then 86mm you might want to add a tube that is sold in lengths of 1100mm to be cut to the required length. A handle is also available. NÜVO-PRO ENG FRONT Code Length Colour Height Qty / Box mm Silver 86mm Per Unit 86mm HAR NÜVO-PRO ENG FRONT CORNER BRACKETS Code Colour Qty / Box Grey Pair NÜVO-PRO ENG FRONT CORNER BRACKETS Code Colour Qty / Box Grey Pair NÜVO-PRO ENG FRONT CORNER BRACKETS Code Colour Qty / Box Grey Pair NÜVO-PRO ENG FRONT CORNER BRACKETS Code Colour Qty / Box Grey Pair NÜVO-PRO ENG FRONT PANEL HANDLE Code Colour Qty / Box Grey Per Unit NÜVO-PRO ENG FRONT PANEL TUBE Code Length Colour Qty / Box mm Silver Per Unit 86mm 140mm 164mm 204mm DRAWERS ACCESSORIES NÜVO TM HARDWARE 15 DRAWERS ACCESSORIES
17 NÜVO LIQUIDATION SALES LIQUIDATION SALE WHILE SUPPLIES LAST ASK YOUR LOCAL SALES REPRESENTATIVE FOR PRICING AND PRODUCTS AVAILABILITY EURO NÜVO METAL BOX DRAWER SLIDE - 86MM Metallic Silver Length Qty / Box pairs pairs pairs NÜVO-PRO DOUBLE WALL DRAWER SLIDE SYSTEM Code Sizes Colour X 16'' Stainless Steel front-face attachment / screw in X 18'' Stainless Steel front-face attachment / screw in X 20'' Stainless Steel front-face attachment / screw in X 22'' Stainless Steel front-face attachment / screw in LIQUIDATION SALES EURO NÜVO METAL BOX DRAWER SLIDE - 118MM Metallic Silver Length Qty / Box pairs pairs pairs EURO NÜVO METAL BOX DRAWER SLIDE - 150MM Metallic Silver Length Qty / Box pairs pairs pairs EURO NÜVO METAL BOX DRAWER SLIDE - 200MM Metallic Silver Length Qty / Box pairs pairs pairs ACCESSORIES (to increase drawer height) Code Tubes Sizes Colour C164 16'' Stainless Steel C164 18'' Stainless Steel C164 20'' Stainless Steel C164 22'' Stainless Steel C204 16'' Stainless Steel C204 18'' Stainless Steel C204 20'' Stainless Steel C204 22'' Stainless Steel SOFT-CLOSE FULL EXTENSION BALL BEARING SLIDE Code Length HAR LIQUIDATION SALES 16 NÜVO TM HARDWARE
18 TORONTO 25 Dansk Court Rexdale, ON M9W 5N6 (416) (800) BOUCHERVILLE 100 rue de Vaudreuil Boucherville, QC J4B 5G4 (514) (800) boulevard du Golf Anjou, QC H1J 2Y7 (514) (800) BRAMPTON 89 Summerlea Road Brampton, ON L6T 4V2 (905) (800) WINNIPEG 1865 Burrows Avenue Winnipeg, MB R2X 2V9 (204) (888) LONDON 1010 Green Valley Road London, ON N6N 1E3 (519) (800) NORTH BAY 12 Old Sturgeon Falls Road North Bay, ON P1B 8G5 (705) (800) QUEBEC 5850 rue des Tournelles Quebec, QC G2J 1E4 (418) (877) eforestproducts.com 60 Rayette Road Concord, ON L4K 2G4 (416) (800) PETERBOROUGH 2001 Fisher Drive Peterborough, ON K9J 7H7 (705) (800) DARTMOUTH 30 Williams Avenue Dartmouth, NS B3B 2E2 (902) (800) ST-LAURENT 3500 Pitfield St-Laurent, QC H4S 1W1 (514) (800) QUEBEC 5300 Armand Viau Quebec, QC G2C 1Y7 (418) (800) WATERLOO 100 Randall Drive Waterloo, ON N2J 4A9 (519) (800) OTTAWA 2950 Swansea Crescent Ottawa, ON K1G 3W4 (613) (877) W.C EDWARDS LUMBER 955 Mackay Street Pembroke, ON K8B 1A2 (613) MONCTON 135 Driscoll Crescent Moncton, NB E1E 4C8 (506) (800) OTTAWA 1881 Bantree Street Ottawa, ON K1B 4X3 (613) (800) NÜVO
FURNITURE HARDWARE AND KITCHEN ACCESSORIES
FURNITURE AND KITCHEN ACCEORIE KITCHEN ACCEORIE DITRIBUTED BY: CREW HANDLE COLLECTION LOCK Limited Lifetime Warranty For Commercial Products nuvoconcept.com This Limited Lifetime Warranty is given to the
More informationNÜVO SCREWS THE MOST TECHNOLOGICALLY ADVANCED SCREW FOR PANELS AND HARDWOOD
NÜVO SYNERGY TECHNOLOGY QUALITY SCREWS THE MOST TECHNOLOGICALLY ADVANCED SCREW FOR PANELS AND HARDWOOD PRODUCT ADVANTAGES NÜVO The most technologically advanced screw for panels and hardwood NÜVO DRIVE
More informationPOIGNÉES/HANDLES COLLECTION 2018
POIGNÉES/HANDLES COLLECTION 2018 24-532-4 24-231-0 24-514-4 CHROME / CHROME CC 22 x 20 x 25 Impérial / Imperial ¹³/₁₆ x ¹³/₁₆ x 1 24-271-0 NOIR MAT AVEC BORDURE ARGENTÉE / MATTE BLACK WITH SILVER EDGE
More informationATTRACTION drawer. Twin-walled seel drawer. Complete. 50 Kilos resistance. indamatic. Range of concealed runners up to. self closing and soft closing.
F U R N I T U R E F I T T I N G S M A N U F A C T U R E R Twin-walled seel drawer. Complete Range of concealed runners up to 50 Kilos resistance. indamatic self closing and soft closing. Double wall 405
More informationFunctional Hardware HINGES:
Functional Hardware»» One Stop Shop for all cabinet manufacturing hardware including hinges, slides, screws, door bumpers, shelf pins, catches and more»» Third Party Testing on hinges and slides to meet
More informationZARGEN AND INTEGRA ZARGEN & INTEGRA STEEL DRAWER SYSTEMS.
ZARGEN AND INTEGRA ZARGEN & INTEGRA STEEL DRAWER SYSTEMS Zargen and Integra steel drawer systems provide flexibility to please the most demanding design needs. www.grassusa.com Zargen and Integra Drawer
More informationStaples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Item # Size Finish Material Case Qty.
Edge Protector Staples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Size Finish Material Case PX91000N* 1-[½]"L x [⅝]" x [ 9 / 16]" Natural Plastic
More informationHeavy Duty Ball Bearing Drawer Slides Full Extension
301FU Series Heavy Duty Ball Bearing Drawer Full Extension Ordering Length 10 12 350mm 14 16 18 20 22 24 26 28 Zinc 301FU10 301FU12 301FU350 301FU14 301FU16 301FU18 301FU20 301FU22 301FU24 301FU26 301FU28
More informationMODEL 9301E. Extra Heavy Duty Full Extension Drawer Slide Up to 600-lb. [272 kg.] Load Rating Optional Accessory Platform Brackets*
1 MODEL 9301E APPLICATIONS: This versatile slide is designed for use in a variety of heavy-duty storage applications. Please preview the application information provided on the following pages for further
More informationTheDrawerDepot.com DYNAPRO DYNAPRO SLIDE SYSTEM. The new generation of concealed undermount slides. Elegant, comfortable, and precision engineered.
TheDepot.com DYNAPRO DYNAPRO SLIDE SYSTEM The new generation of concealed undermount slides. Elegant, comfortable, and precision engineered. TheDepot.com TheDepot.com To create a product innovation is
More informationRouter Table Floor Stand
Router Table Floor Stand Owner s Manual 05J20.40 Introduction The Veritas Router Table Floor Stand has been designed as a free-standing router table workstation to work with the existing Veritas Router
More informationTANDEM plus BLUMOTION
TANDEM plus BLUMOTION Premium Concealed Runners for Wood Drawers TANDEM plus BLUMOTION TANDEM plus BLUMOTION brings together all of the features, innovations and benefits that Blum has developed since
More informationMOVENTO. The Evolution of Motion
The Evolution of Motion is the latest advancement in concealed runner technology. It brings together all of the features, innovations and benefits that Blum has developed since first manufacturing drawer
More informationWaste/recycle sets. Waste/recycle sets Premium TANDEM and TANDEMBOX solutions for waste/recycle cabinets. blum.com
Waste/recycle sets Waste/recycle sets Premium TANDEM and TANDEMBOX solutions for waste/recycle cabinets blum.com Waste/recycle solutions for every kitchen Blum s new TANDEM and TANDEMBOX waste/recycle
More informationSTANDARD. Drawer runner program. Perfecting motion.
STANDARD Drawer runner program Perfecting motion STANDARD drawer runners Table of Contents Blum STANDARD drawer runners apply proven technology built upon years of experience to ensure a solid performance
More informationRH-412 STEEL DOORS INSTALLATION INSTRUCTIONS
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.
More informationWaste/recycle sets. Waste/recycle sets. Premium TANDEM and TANDEMBOX solutions for waste/recycle cabinets. blum.com
Waste/recycle sets Waste/recycle sets Premium TANDEM and TANDEMBOX solutions for waste/recycle cabinets blum.com SERVO-DRIVE BLUMOTION Waste/recycle solutions for every kitchen Blum s new TANDEM and TANDEMBOX
More informationINSTALLATION INSTRUCTIONS RH 412 STEEL DOORS
By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side. Note: Having the hood open makes the job
More informationMounting Brackets for 8450 Drawer Slides KV Front Bracket 20 $1.30 KV P Rear Bracket 20 $5.20
Mounts bottom or side 1/2 clearance plus 1/32 0 lb. load with model Almond finish Integrated soft-close mechanism 32mm hole pattern with direct access mounting Lever disconnect for easy drawer removal
More informationUtensil sets. 15" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides. 21" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides
Utensil sets a 15" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides 11-5/8" 6-1/8" 4-1/4" 18" Drawer length ZHI.457FI1A 21" Drawer length ZHI.533FI1A 21" wide cabinets with 1-1/2" frames and
More informationCopyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax
Copyright 2003. Black Box Corporation. All rights reserved. 1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746 JULY 2003 RM3010A RM315-R2 RM323-R2 RM329 RM451 RM457 RM3020A RM316 RM324-R2
More informationSimple, practical and economical. Largest range on the market. SlowMotion Zeta optional
256 Affordable drawer system Simple, practical and economical Largest range on the market SlowMotion Zeta optional Uniset Uniset drawers are used by a very large base of Kitchen and bathroom manufacturers
More informationASSEMBLY HARDWARE ASSEMBLY HARDWARE. Installation and assembly hardware for professional efficiency
ASSEMBLY HARDWARE ASSEMBLY HARDWARE Installation and assembly hardware for professional efficiency www.grassusa.com Installation and assembly aids for all product families designed to suit our customer
More informationFURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS
www.hafeleindia.com FURNITURE HARDWARE & ACCESSORIES - PART 2 : SHELF SUPPORT AND SHELVING SYSTEMS ABOUT ITALIANA FERRAMENTA ITALIANA FERRAMENTA is specialized in the production of high quality accessories
More informationSOLO Concealed Runners for wood drawers
SOLO Concealed Runners for wood drawers Perfecting motion Table of contents Application Chart Drawer Thickness Cabinet type Load Capacity 5/8" 3/4" Frame Panel Dynamic Static Page SOLO 262H 75 lb. 100
More informationACCESSORIES. Wooden Dowels. Fasteners. Miscellaneous. Shelf Supports
ACCESSORIES ACCESSORIES Fasteners PMI has a variety of Fasteners and Connectors for any application. Euro-Bolts, Spiral Cam Connectors, Screws and Sleeves - we have your solution! Shelf Supports Assorted
More informationLEGRABOX. Drawer Assembly and Removal. Drawer Assembly Step 1. Step 2. Step 3. Step 4. Step 5. Drawer Removal
Drawer Assembly and Removal Drawer Assembly Step 1 Measure inside cabinet width (ICW) Use inside cabinet width (ICW) to calculate the drawer bottom and back dimensions. Formulas are found on the specification
More informationASSEMBLY INSTRUCTIONS RIGHT & LEFT HAND "J" TABLE
ASSEMBLY INSTRUCTIONS RIGHT & LEFT HAND "J" TABLE (1) COMPONENT LIST FOR RIGHT & LEFT HAND "J" TABLE NOTE: Please count and inspect all pieces before disposing of any carton or packing materials. 24" x
More informationOrganisational Kitchen Fittings Kitchen Cabinet Accessories
Kitchen waste bin systems Single waste bin, capacity 1 litres Carcase width: Min. 400 mm For door mounting: For left and right hand use Installation: Screw fixing to side panel Housing: Steel, plastic
More information35mm 110 Deg. Concealed Hinge with Mounting Plate. 35mm 110 Deg. Soft Closing Concealed Hinge. 26mm 95 Deg. Concealed Hinge with Mounting Plate
35mm 110 Deg. Concealed Hinge with Mounting Plate Most economical of our 35mm concealed hinges. 386 41102 00 386 41102 08 386 41102 15 Slide-on Full overlay Self Closing Slide-on Half overlay Self Closing
More informationThanks for shopping with Improvements! Mandarin Tansu Step Cabinet Item #512735
Thanks for shopping with Improvements! Mandarin Tansu Step Cabinet Item #512735 This unit can be assembled so the top and middle cabinets are on the left or on the right. Use these instructions for a right-sided
More informationSelekta Pro 2000 Fast assembly hinges for office and commercial furniture
Fast assembly hinges for office and commercial furniture 99 The program opening angles 180 and 270 with pre-mounted pan-head screws with eccentric height adjustment ± 2 mm with eccentric overlay adjustment
More informationWORKSHOP INTERIOR FOR THE COMMITTED
WORKSHOP INTERIOR FOR THE COMMITTED EVERYTHING IN ITS PLACE For a modern workshop to be efficient, safe and profitable, order must be maintained. Everything in its place. The workshop interior from Kamasa
More informationExtended Stiles (EXT)
This section details the options that are available on the RTA. The Available Options section mirrors the options bar you see associated with each cabinet in the WALL, BASE, TALL, VANITY and HOME OFFICE
More informationv1.0 ASSEMBLY GUIDE Mia Wide Bookcase
v1.0 ASSEMBLY GUIDE Mia Wide Bookcase Components Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase.
More informationMOVENTO. The Evolution of Motion For 1/2" Drawer Material Thickness
The Evolution of Motion For 1/2" Drawer Material Thickness is the latest advancement in concealed runner technology. It brings together all of the features, innovations and benefits that Blum has developed
More informationCopyright Black Box Corporation. All rights reserved.
Copyright 2008. Black Box Corporation. All rights reserved. 1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746 4-Post Steel Open Rack AUGUST 2008 RM7000A RM7001A RM7002 RM7003A RM7004A
More informationDrawer slide technology with superior running conditions. Dynamic NT
slide technology with superior running conditions System Information The slide of the superlatives. Superior concealed roller bearing slides for wooden drawer boxes. Full Extension and Full Access slides
More informationMaterial Packing Brown Grey Pine Black White
RTA Connectors Minifix Zinc alloy For housing: 12 or 18 Bolt hole: Ø 7 or 8, depending on choice of connecting bolt Drilling distance B: Distance from centre of Minifix housing to shelf front edge (24
More informationInstallation Instructions
by Plato Woodwork Installation Instructions Plato Woodwork, Inc. 200 Third Street SW P.O. Box 98 Plato, MN 55370 www.platowoodwork.com 800.328.5924 SECTION GUIDE GETTING STARTED PAGE # Installation Methods...
More informationSTANDARD 430E Series. Bottom mounted full extension drawer runners 430E E E E E E E E E4000
STANDARD 430E Series Bottom mounted full extension drawer runners Specifications Runner 430E8000 430E7500 430E7000 430E6500 430E6000 430E5500 430E5000 430E4500 430E4000 430E3500 430E3000 430E2500 Nominal
More informationHARDWOOD CLOSET SYSTEM
ITEM #0020720 HARDWOOD CLOSET SYSTEM MODEL #WSCO-72C-AR ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service
More informationTable and Furniture Base Fittings Plinth Adjusting Fittings
Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.
More informationFurniture Fittings Concealed Hinges
Blum Clip Top Blumotion, opening angle 110 Material: Steel cup and arm : Screw fixing Installation: Door onto carcase without tools (Clip system) Adjustment: 3 dimensional (with appropriate mounting plate)
More informationSTANDARD. Drawer runner program. Perfecting motion. blum.com
STANDARD Drawer runner program blum.com Perfecting motion Proven technology - built upon years of experience Blum testing criteria Cycle life/dynamic load capacity test Side pressure test 100,000 open/close
More informationCABINETRY Assembly Instructions
www.hdicabinetry.com Assembly Instructions TABLE OF CONTENTS Category Page(s) Section 1: Framed Series Base Cabinet Instructions Wall Cabinet Instructions Easy Reach Cabinet Instructions 1.01-1.04 1.05-1.06
More informationTried-and-tested quality.
Tried-and-tested quality. Rugged single and full-extension drawer slides in tried-and-tested quality for top requirements. www.grass.at, info@grass.eu Roller slides Tried-and-tested quality and functionality.
More informationCloset System Installation Manual
Closet System Manual Thank you For choosing our Custom Closet Collection to fit all your needs Closets come fully assembled to make your project an enjoyable and satisfying experience. With quality Custom
More informationZooM stock range - CoMMonWeAlth plywood. Simple everyday solutions
ZooM stock range - CoMMonWeAlth plywood Simple everyday solutions 2012 2016 02 CONTENT ZOOM products & services. Simple everyday solutions Contents Availability 03 Product Overview 04 Textures 06 Decors
More informationSteele TV Stand Stock # BH
LOT NUMBER: DATE PURCHASED: / / Steele TV Stand Stock # BH46-084-899-02 ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store
More informationTHE COMPLETE CABINET
THE COMPLETE CABINET ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE WELCOME TO ONE-STOP SHOPPING. THE ONLY ALUMINUM DOOR PROGRAM YOU LL NEED. This is
More informationTHE COMPLETE CABINET
THE COMPLETE CABINET ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE WELCOME TO ONE-STOP SHOPPING. THE ONLY ALUMINUM DOOR PROGRAM YOU LL NEED. This is
More informationFURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS
www.hafeleindia.com FURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS ABOUT ITALIANA FERRAMENTA ITALIANA FERRAMENTA is specialized in the production of high quality accessories and ironmongery
More informationLaminate Cabinet Installation Instructions
Laminate Cabinet Installation Instructions www.easygaragestorage.com/installation How To Use These Instructions Thank you for your purchase! Please read each step of this manual thoroughly to ensure proper
More informationCROWN IMPERIAL ASSEMBLY INSTRUCTIONS
CROWN IMPERIAL ASSEMBLY INSTRUCTIONS Standard Drawer Box Page 1 of 14 Standard Drawer Box Parts Parts Supplied B C D A E F G Page 2 of 14 Part Letter Part Name Quantity 300-600 Deep Pan A Base Panel 1
More informationRTA-3520 DIMENSIONS MAXIMUM WEIGHT CAPACITIES. Product Size: 47.5"W x 23"D x 30"H
MODEL RTA - 3520 Thanks for purchasing one of our products. Please read carefully the assembly instructions before the installation. Please save this manual for future reference. Complete video assembly
More informationPATENTED NO WELD SYSTEM!
PATENTED NO WELD SYSTEM! Patented no weld aluminium batten system Various batten sizes snap onto simple fixing clip Fit to face of walls and ceilings or between pillars or posts Cut to size system with
More informationHinges and Flap Fittings Information
Information METALLAMAT Adjustment options Lateral adjustment Adjusting on concealed hinge + mm Height adjustment Via mounting plates adjusting ± 2 mm Depth adjustment Adjusting on concealed hinge + 4 mm,
More informationPULLOUT SHELF ROCKLER BUILD IT WITH BUILD CUSTOMIZE
BUILD Stock Item 12229 Drawer s, 2 1 2" x 48" 63420 Baltic Birch Ply, 1/4" x 24" x 30" 38742 Maple, 3/4" x 3" x 24" 45953 100# Zinc Over-Travel Drawer Slides - Centerline 757-20" 30254 #8 x 1 1 4" Square
More informationroom essentials >> assembly instructions Drawer dresser w/ door Video instruction as Help to assembly, scan the QR code and see the video.
room essentials 4 Drawer dresser w/ door DPCI # 249-05-0418 (Black Woodgrain) DPCI # 249-05-0419 (Virginia Walnut) >> assembly instructions 92380 Video instruction as Help to assembly, scan the QR code
More informationStandard drawer runner program
Standard drawer runner program i 230M Single extension, Blumatic self-closing drawer runners s: 250mm (10") to 650mm (26") 230 series drawer runners Cabinet profile Drawer profile Rear mount sockets available
More informationInterior Equipment/Shop Fittings
Interior Equipment/ Contents Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Hook-in profile Hook-in profile Eilox SHOPTEC Shopfitting system Wall channel Bracket Column Accessories
More informationCanterbury 4 DRW CHEST
Canterbury 4 DRW CHEST Assembly Instructions - Please save for future reference 553/4801 565/2178 572/6080 25 kg 55 lbs 9 kg 20 lbs max. Dimensions Width - 84.3cm Depth - 41.9cm Height - 99.7cm Important
More informationLIBRA H7 APPLICATIONS: SCREW FIXING and DOWEL FIXING WITH OPTIONAL ALUMINIUM BARS
LIBRA H7 APPLICATIONS: SCREW FIXING and DOWEL FIXING WITH OPTIONAL ALUMINIUM BARS BENEFITS OF LIBRA H7 HANGING SYSTEM: - Vertical and in-depth adjustments as well as the locking of the cabinet, can be
More informationMighty Mo GX Series Cabinet Installation Guide. OR Rev /11
Mighty Mo GX Series Cabinet Installation Guide OR-71601787 Safety and Warning ATTENTION The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating
More informationBLIND CORNER ACCESSORIES
Let Rev-A-Shelf end your blind corner dilemma with our line of innovative organizational accessories. Specially designed to maximize the storage capacity of your cabinets, each product incorporates revolutionary
More informationPREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
PROFILE SYSTEM PRE-ASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS s r ood gni d i l s dna gni t f i l r o f s t neme l e de l bme s s a - er P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS MINITEC
More informationTechnical product descriptions WORKTOPS STANDARD SLIM LINE. 1. Material thickness 38 mm. 2. Core/substrate material Chipboard
Technical product descriptions WORKTOPS I STANDARD 1. 38 mm 2. Chipboard 3. Surface material Laminate (CPL, HPL) 4. Laminate thickness 0,6-0,8 mm 5. Surface structure Wood pore or relief, matt, gloss 6.
More informationTANDEM plus BLUMOTION
TANDEM plus BLUMOTION TANDEM plus BLUMOTION Made in the USA Blum's newest generation of TANDEM plus BLUMOTION concealed drawer runners offers four-dimensional adjustment, elongated holes for depth adjustment,
More informationArchitectural Door & Cabinet Hardware
Architectural Door & Cabinet Hardware TYDIX Flush Pulls TYDIX Flush Pulls are ground and polished to furnish a square, flat dress face usually free of blemishes. All outside edges and corners are clean
More informationHampshire Buffet Cabinet with Glass Doors
Thanks for shopping with Improvements! Hampshire Buffet Cabinet with Glass Doors Item #55919 Note: Read these instructions carefully before assembling. Tools required: Philips screwdriver (not included).
More informationThese 15U, 22U, 37U, 42U, and 51U racks provide exceptional stability.
RM7000A-R2 RM7003A-R2 RM7006 RM7001A-R2 RM7004A-R2 RM7007 RM7002 RM7005A-R2 RM7008A-R2 RM7010 4-Post Steel Open Racks These 15U, 22U, 37U, 42U, and 51U racks provide exceptional stability. Hold up to 2200
More informationSLIDING DOOR SYSTEM_ S42 PRODUCT LIST. System description Accessories
SLIDING DOOR SYSTEM_ S42 PRODUCT LIST System description Accessories 1 SLIDING DOOR SYSTEM_ S42 1.0_ System description_ page 03 2.0_ Profiles_ page 04 3.0_ System description S1600 fixed panels_ page
More informationOxford Stalls Installation Instructions
Oxford Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 8/15/17 Before You Start Typical stall sizes are 10 x 10, 12 x 12 or
More informationMANAGED CARE QUICK CABINETS
Clinton Managed Quick Care Cabinets are the quickest and most economical way to get quality cabinets for office, clinic or exam rooms. Clinton cabinets ship in pre-assembled units and are easy to install.
More informationFunctional movement systems for furniture in offices and public buildings. SINGLE-JOINT HINGES
SINGLE-JOINT HINGES Functional movement systems for furniture in offices and public buildings. QUALITY CERTIFICATE Reduced to the essentials. For us, that means focusing on quality, design and function.
More informationArchitectural Door & Cabinet Door
Architectural Door & Cabinet Door A1 TYDIX Flush Pulls TYDIX Flush Pulls are ground and polished to furnish a square, flat dress face usually free of blemishes. All outside edges and corners are clean
More informationFortress Railing Overview ACTUAL FREIGHT CHARGES APPLY TO ALL FORTRESS RAIL ORDERS
Fortress Railing Overview 4 3 1 Fe 26 Iron Railing Systems Fortress Use the steps below for the following pages to complete your rail Vertical Cable and Glass Options Available Fortress Iron Railing System
More informationINSTALLATION GUIDE FOR METAL LABORATORY CASEWORK
LABORATORY Casework & Cabinets INSTALLATION GUIDE FOR METAL LABORATORY CASEWORK RDM Industrial Products, Inc. RDM LAB CABINET INSTALLATION GUIDE TABLE OF CONTENTS GENERAL INFORMATION...1 Freight Damage...1
More informationLocks and Catches Catches and Furniture Bolts
Magnetic catch with low noise closure Material: Plastic housing Version: with closed surface and internal magnet, magnets no viewable : Press fixing Pull 0. kg, for drilling hole Ø8 mm white 26.01.701
More informationC PART LIST HARDWARE LIST. Kitchen Cart IMPORTANT NOTE
88 9200 006C Kitchen Cart IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken
More informationDesigned for Your Convenience
Table of Contents Intro & Blum Drawer Box Adjustments Removing Drawer Alignment Dimensions Glide Adjustments Front Adjustments Hinge Adjustments Removing s Full Overlay Inset Concealed (CH) Inset Revealed
More informationSection 1. Kitchen installation. Base cabinets
Section 1 Kitchen installation Base cabinets Pre-build - Cabinet leg... page 16 Pre-build - Alternative cabinet leg... page 18 Pre-build - Cabinets.... page 19 Pre-build - Corner base cabinet centre upright
More informationSLIDING DOOR SYSTEM_ S34 PRODUCT LIST. System description Accessories
SLIDING DOOR SYSTEM_ S34 PRODUCT LIST System description Accessories SLIDING DOOR SYSTEM_ S34 1.0_ System description_ page 03 2.0_ Profiles_ page 04 3.0_ Profile finishes_ page 08 4.0_ Panels_ page 09
More informationThanks for shopping with Improvements! Hamper Cabinet with Drawer Item #512188
Thanks for shopping with Improvements! Hamper Cabinet with Drawer Item #512188 IMPORTANT: Since the bin pivots forward, this unit must sit on the floor for safety reasons. Other items of the same width
More informationNEWS Part. N /0 MINITEC NEWS
NEWS 2009 Part. N 95.0423/0 MINITEC NEWS 2009 1 TABLE OF CONTENT INTRODUCTION CONTENTS 3 END CAP Z WITH HAMMER TAPS 3 END CAP 45X45 VA 4 ANGLE 25 GD-Z 4 ANGLE 45X90 GD-Z 5 ANGLE 90 GD-Z 5 HINGE 19 S 6
More informationTECHN. DATA/ITEMS SUPPLIED APPLICATIONS ASSEMBLY. - Connection of profiles
MOUNTING BRACKET 45 Part N 21.1411/0 - GD Zn, powder coated, grey Weight 0,426 kg - Connection of profiles - For subsequent fitting of profiles into existing constructions, displacable in direction of
More informationBase Cabinet. Assembly Guide. Give Us A Call at ext 2. Or You Can Watch The Assembly Videos Here
Base Cabinet Assembly Guide 1 Hey there! Assembling our cabinets is really simple, but in case you re a little nervous, this guide should help. Simply follow this quick guide and you ll be a cabinet assembly
More informationTender No Section St. James - Assiniboia Centennial Pool Fitness Facility Addition Page 1
Fitness Facility Addition Page 1 PART 1 GENERAL 1.1 SECTION INCLUDES.1 Finish carpentry items including shop prefabricated casework and countertops..2 Hardware and attachment accessories..3 Wood Benches..4
More informationSection J-2: Glides and Levelers. Section J-2: Glides and Levelers. Glides and Levelers. Last Updated: 07/02/10
Section J-2: Glides and Levelers Section J-2: Last Updated: 07/02/10 Maverick Hardware Section J-2: Light Duty Glides Adjustable Suggested applications: residential, RTA furniture, and store fixtures.
More informationKitchen Fittings Hanging Cabinets and Accessories
Cabinet hanger Knock-in version, load bearing capacity 130 kg/pair Depth adjustment Finish: Galvanized Concealed mounting of cabinet hanger behind the rear panel (Min. 16 mm free space required) Mounting
More informationProduct Spec Sheet & Order Form
Product Spec Sheet & Order Form 7601 E. Treasure Dr Ste 2120 North Bay Village, - FL 33141 Ph: 305-9991543 Email:info@steelkitchenweb.com Web:www.steelkitchenweb.com MODULAR KITCHEN CABINETS Material Specs:
More informationKnobsandPulls.com. Presents. A Simplified Approach to Building Cabinets Using the 32mm System
KnobsandPulls.com Presents the KISS II system. A Simplified Approach to Building Cabinets Using the 32mm System Available online at www.cabsystems.com Revised September 2007 by Joel Ketner or www.kissii.com
More informationW INE S TORAGE INSTALLATION INSTRUCTIONS
W INE S TORAGE INSTALLATION INSTRUCTIONS SUB-ZERO WINE STORAGE The importance of the installation of the Sub-Zero Wine Storage unit cannot be overemphasized. Installation should be done by a qualified
More informationHOUSE PARTS PACKED IN HOUSE BOX PARTS IN PLASTIC BAG (HARDWARE) PARTS IN SMALL PLASTIC BAG (FLOOR CLIPS) PARTS PACKED IN BUNDLE
Check parts against this list before starting assembly. Refer to illustrations on pages 6 and 7 to view house parts. If any shortages are found, refer to Packing Slip for claim instructions. Item 3 5 6
More informationGO STEEL STEEL FURNITURE. Mile End Office Furniture
GO STEEL Mile End Office Furniture GO STEEL FURNITURE www. mileendofficefurniture.com.au Mile End Office Furniture 107 Henley Beach Road, Mile End SA 5031 Australia t. +618 8229 7676 f. +618 8234 1618
More informationInstallation Guide Installation Kit for Mounting Philips MP20/30/40/50 on Datex-Ohmeda Aisys Anesthesia Machine
Installation Guide Installation Kit for Mounting Philips MP20/30/40/50 on Datex-Ohmeda Aisys Anesthesia Machine The purpose of this guide is to: 1. Describe mounting of Counterweight (page 2). 2. Describe
More informationMODUL general specifications
hinges general specifications inge-to-door attachment Mounting plate-to-cabinet Press-in Use #6 wood screws Pre-attached dowels, install with lum MINIPRESS lum boring pattern Door-to-cabinet attachment
More informationSYMBOLS AND AND FINISHES LEGEND
SYMBOLS AND AND FINISHES LEGEND SYMBOLS = SHELF = SHELF SAFELY SAFELY LOCKED LOCKED DURING DURING TRANSPORTATION AND AND AT HOME. AT HOME. LOCK LOCK = ANTI-TURNOVER = LOCKING LOCKING SYSTEM SYSTEM = NORMS
More informationCopyright 2010, by Walker Edison Furniture Co., LLC. All rights reserved.
General Assembly Guidelines I. Insure that all parts and hardware are available before beginning assembly. II. III. IV. Follow each step carefully to insure the proper assembly of this product. Two people
More information