Leadenhall Collection Desk Model # JCS I

Size: px
Start display at page:

Download "Leadenhall Collection Desk Model # JCS I"

Transcription

1 LOT NUMBER: DATE PURCHASED: / / Leadenhall Collection Desk ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES AS RECEIVED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased. Please call our toll-free customer service number and have your instructions and parts list ready to provide the model name, part name or factory number: Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday Or visit our web site 24 hours a day, 7 days a week for product assistance at Or your request to parts@whalenfurniture.com THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Whalen Furniture Mfg., Inc. Page 1 Factory No

2 Important Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and nonabrasive surface. You will need the parts identified on page 3, 4 and 5 of this instruction manual. NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED OFF WITH DAMP CLOTH. Insert Dowel at least half way by tapping lightly with a rubber mallet IF NECESSARY. CAM LOCK SYSTEM OPERATION HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS 1. Screw Cam Bolt into the pre-drilled small holes on panel. 2. Connect both panels together; making sure Cam Bolt goes into pre-drilled hole on the end of panel with Cam Lock. 3. Insert Cam Lock into pre-drilled large hole on panel. Make sure arrow on Cam Lock is pointed toward Cam Bolt. 4. Once Cam Bolt is connected inside Cam Lock, take a Phillips screwdriver and tighten Cam Lock clockwise. 5. Plug Cam Cap into the cross slot of the Cam Locks to conceal the cam. You are now ready to assemble the KD unit. Whalen Furniture Mfg., Inc. Page 2 Factory No

3 Parts and Hardware List Please read completely through the instructions and verify that all parts listed are present before beginning assembly. A- Desk Top (1) B- Left Pedestal Left Side (1) C- Left Pedestal Right Side (1) D- Left Pedestal Bottom Stretcher (2) E- Right Pedestal Left Side (1) F- Right Pedestal Right Side (1) G- Right Pedestal Bottom Panel (1) H- Modesty Panel (1) I- Pedestal Back Panel (2) J- Door Panel (1) K- Middle Crossbar (2) L- Bottom Front/Back Molding (4) M- Bottom Side Molding (4) N- Adjustable Shelf (1) P- Middle Drawer Front (1) P1- Middle Drawer Back Panel (1) P2- Middle Drawer Left Side (1) P3- Middle Drawer Right Side (1) P4- Middle Drawer Bottom Panel (1) P5- Middle Drawer Bottom Support (1) Q- Right Drawer Front (1) Whalen Furniture Mfg., Inc. Page 3 Factory No

4 Parts and Hardware List Please read completely through the instructions and verify that all parts listed are present before beginning assembly. Q1- Right Drawer Back Panel (1) Q2- Right Drawer Left Side (1) Q3- Right Drawer Right Side (1) Q4- Right Drawer Bottom Panel (1) R- Left Drawer Front (2) R1- Left Drawer Box Front (1) R2- Left Drawer Back Panel (1) R3- Left Drawer Left Side (1) R4- Left Drawer Right Side (1) R5- Left Drawer Bottom Panel (1) S- File Drawer Front (1) S1- File Drawer Back Panel (1) S2- File Drawer Left Side (1) S3- File Drawer Right Side (1) S4- File Drawer Bottom Panel (1) T- Guide Rail (2) U- File Hanger (2) V- 16 inch 3-packed Slides (2) W- 14 Ball Bearing Slides (2) X- 16 inch 2-packed Slides (2) CL- Left Slide Track (1) CR- Right Slide Track (1) DL- Left Slide Runner (1) DR- Right Slide Runner (1) Whalen Furniture Mfg., Inc. Page 4 Factory No

5 Parts and Hardware List Please read completely through the instructions and verify that all parts listed are present before beginning assembly. (1) Cam Lock (2) Cam Bolt (3) Large Wood Dowel (4) Small Wood Dowel (48+2 extra) (48+2 extra) (31+1 extra) (8+1 extra) (5) M3.5 x 12 mm Zinc Screw (6) M3.5 x 12 mm Screw (7) M5 x 30 mm Screw (8) M5 x 38 mm Screw (4+1 extra) (12+1 extra) (12+1 extra) (22+1 extra) (9) M3.5 x 12 mm Pan Head Screw (10) M5 x 14 mm Pan Head Screw (11) M4 x 25 mm Pan Head Screw (64+2 extra) (10+1 extra) (4+1 extra) (12) Cam Cap (13) Shelf Pin (14) Plastic Connector (15) Large Plastic Bracket (11+1 extra) (4+1 extra) (8) (2) (16) Small Plastic Bracket (17) Floor Protector (18) Door Hinge (19) Drawer Handle (2) (8+1 extra) (2) (6) (20) Door Knob (1) (21) 22 mm Handle Bolt (9) (22) 19 mm Handle Bolt (4) (23) Medium Plastic Bracket (2) Glue (1) Touch-up Pen (1) Tools required: Phillips screwdriver and Hammer (not provided). Whalen Furniture Mfg., Inc. Page 5 Factory No

6 File Drawer Assembling 1. Unpack the unit and confirm that you have all the hardware and required parts listed. 2. Pick up 16 inch 3-packed Ball Bearing Slides (V) and separate the Slide Runners for later step. Extend the Slide Runner all the way forward. Press the plastic release lever of the ball bearing slides up and pull the Slide Runner complete out. 3. Attach the separated Slide Runners (V) to File Drawer Left and Right Side (S2 and S3) respectively with three M3.5 x 12 mm Pan Head Screws (9) per slide runner. Ensure the closed end of Slide Runner against the front edge of drawer side panel. S2 S3 4. Using the pilot holes as a guide, attach two Large Plastic Brackets (15) onto the File Drawer Front (S) with four M5 x 14 mm Pan Head Screws (10). Be sure the tabs of Plastic Bracket facing outward. S Whalen Furniture Mfg., Inc. Page 6 Factory No

7 File Drawer Assembling 5. Connect File Drawer Left and Right Side (S2 and S3) to the File Drawer Front (S) using four M3.5 x 12 mm Pan Head Screws (9). Make sure the grooves line up with each other. Tighten the screws with a Phillips Screwdriver. S3 S S2 6. Slide File Drawer Bottom Panel (S4) all the way into the grooves with finished surface up. S4 S3 S S2 Whalen Furniture Mfg., Inc. Page 7 Factory No

8 File Drawer Assembling 7. Fasten the File Drawer Back Panel (S1) to File Drawer Side Panels (S2 and S3) using four M5 x 38 mm Screws (8). Make sure that Drawer Bottom Panel (S4) fits securely into the groove of the Drawer Back Panel (S1). Tighten all the screws with a Phillips Screwdriver. S1 8 S3 S1 S3 S4 S2 S Turn the assembled drawer upright. Position Guide Rails (T) onto the File Drawer Side Panels (S2 and S3) with the high side facing inward. 9. Hook 2 File Hangers (U) onto the high edge of Guide Rails (T). Slide the File Hangers forward and backward to keep hanging files organized. 10. Attach a Drawer Handle (19) to the outside of File Drawer Front (S) using two 22 mm Handle Bolts (21) provided. U U T S1 S3 S2/S3 S2 S 19 Whalen Furniture Mfg., Inc. Page 8 Factory No

9 Left Drawer Assembling 11. Pick up 14 Ball Bearing Slides (W) and separate the Slide Runners for later step. Extend the Slide Runner all the way forward. Press the plastic release lever of the ball bearing slides up and pull the Slide Runner complete out. 12. Attach the separated Slide Runners (W) to Left Drawer Left and Right Side (R3 and R4) respectively with three M3.5 x 12 mm Pan Head Screws (9) per slide runner. Ensure the closed end of Slide Runner against the front edge of drawer side panel. R3 R4 13. Attach the Drawer Handle (19) to the outside of Left Drawer Faces (R) using the 19 mm Handle Bolts (22) provided. R 22 R 22 Whalen Furniture Mfg., Inc. Page 9 Factory No

10 Left Drawer Assembling 14. Using the pilot holes as a guide, fasten Left Drawer Box Front (R1) to both Left Drawer Faces (R) with four M4 x 25 mm Pan Head Screws (11). Tighten the screws with a Phillips Screwdriver. 15. Connect Left Drawer Left and Right Side (R3 and R4) to the Left Drawer Box Front (R1) using four M5 x 38 mm Screws (8). Make sure the grooves line up with each other. Tighten the screws with a Phillips Screwdriver. 8 R4 R R1 Whalen Furniture Mfg., Inc. Page 10 Factory No

11 Left Drawer Assembling 16. Slide Left Drawer Bottom Panel (R5) all the way into the grooves with finished surface up. R5 R4 R R1 17. Fasten the Left Drawer Back Panel (R2) to Left Drawer Side Panels (R3 and R4) using four M5 x 38 mm Screws (8). Make sure that Drawer Bottom Panel (R5) fits securely into the groove of the Drawer Back Panel (R2). Tighten all the screws with a Phillips Screwdriver. R2 8 8 Whalen Furniture Mfg., Inc. Page 11 Factory No

12 Middle Drawer Assembling 18. Pick up 16 inch 2-packed Slides (X) and separate the Slide Runners for later step. Extend the Slide Runner all the way forward. Press the plastic release lever of the slides up and pull the Slide Runner complete out. 19. Attach the separated Slide Runners (X) to Middle Drawer Left and Right Side (P2 and P3) respectively with three M3.5 x 12 mm Pan Head Screws (9) per slide runner. Ensure the closed end of Slide Runner against the front edge of drawer side panel. X X P2 P3 20. Using the pilot holes as a guide, attach two Small Plastic Brackets (16) onto the Middle Drawer Front (P) with two M5 x 14 mm Pan Head Screws (10). Be sure the tabs of Plastic Bracket point towards the short end of drawer front vertically. 21. Screw one Cam Bolt (2) all the way into the designated small hole on Middle Drawer Front (P) as shown in the illustration. Whalen Furniture Mfg., Inc. Page 12 Factory No

13 Middle Drawer Assembling 22. Connect Middle Drawer Left and Right Side (P2 and P3) to the Middle Drawer Front (P) using four M3.5 x 12 mm Pan Head Screws (9). Make sure the grooves line up with each other. Tighten the screws with a Phillips Screwdriver. P2 23. Insert one Large Wood Dowel (3) into the back large hole on Middle Drawer Front (P) as a guide. Align and attach Middle Drawer Bottom Support (P5) to the Middle Drawer Front (P) by engaging one Cam Lock (1) as shown. (Refer to page #2 on Cam Lock system operation supplement). Make sure that you use a small amount of glue with both ends of all dowels. 24. Slide Middle Drawer Bottom Panel (P4) all the way into the grooves with finished surface up. P3 Whalen Furniture Mfg., Inc. Page 13 Factory No

14 Middle Drawer Assembling 25. Fasten Middle Drawer Back Panel (P1) to the Drawer Side Panels (P2 and P3) and Drawer Bottom Support (P5) using six M5 x 38 mm Screws (8). Make sure that Drawer Bottom Panel (P4) fits securely into the groove of the Drawer Back Panel (P1). Tighten all the screws with a Phillips Screwdriver P 26. Turn the assembled drawer upright. 27. Attach two Drawer Handles (19) to the outside of Middle Drawer Front (P) using four 22 mm Handle Bolts (21) provided. P3 P Whalen Furniture Mfg., Inc. Page 14 Factory No

15 Right Drawer Assembling 28. Using the pilot holes as a guide, align and attach Left Slide Runner (DL) to Right Drawer Left Side (Q2) using three M3.5 x 12 mm Screws (6). Make sure the roller end of Slide Runner facing backward. Tightly fasten with a Phillips Screwdriver. 29. Repeat the last step to attach Right Slide Runner (DR) to Right Drawer Right Side (Q3). 30. Using the pilot holes as a guide, attach two Medium Plastic Brackets (23) onto the Right Drawer Front (Q) with four M5 x 14 mm Pan Head Screws (10). Be sure the tabs of Plastic Bracket point towards the short end of drawer front vertically. Whalen Furniture Mfg., Inc. Page 15 Factory No

16 Right Drawer Assembling 31. Connect Right Drawer Left and Right Side (Q2 and Q3) to the Right Drawer Front (Q) using four M3.5 x 12 mm Pan Head Screws (9). Make sure the grooves line up with each other. Tighten the screws with a Phillips screwdriver. Q3 Q Q2 32. Slide the Right Drawer Bottom Panel (Q4) all the way into the grooves with the finished surface up. Whalen Furniture Mfg., Inc. Page 16 Factory No

17 Right Drawer Assembling 33. Fasten the Right Drawer Back Panel (Q1) to Right Drawer Left and Right Side (Q2 and Q3) using four M5 x 38 mm Screws (8). Make sure that Drawer Bottom Panel (Q4) fits securely into the groove of the Drawer Back Panel (Q1). Tighten all the screws with a Phillips Screwdriver. 34. Turn the assembled drawer upright. 35. Attach one Drawer Handle (19) to the outside of Right Drawer Front (Q) using two 22 mm Handle Bolts (21) provided. Q Whalen Furniture Mfg., Inc. Page 17 Factory No

18 Left Pedestal Assembling 36. Insert and screw the Cam Bolts (2) into the designated small holes on Desk Top (A) and 4 Bottom Front/Back Moldings (L) as shown in the illustration. A 37. Attach separated 16 inch 3-packed Slide Tracks (V) and 14 Slide Tracks (W) to the Left Pedestal Left and Right Side Panels (B and C) respectively with three M3.5 x 12 mm Pan Head Screws (9) per slide track. Ensure the opening of Slide Track facing front of the unit. 38. Insert and screw the Cam Bolts (2) into the designated small holes on Left Pedestal Left and Right Side Panels (B and C) as shown in the illustration. V W B C Whalen Furniture Mfg., Inc. Page 18 Factory No

19 Left Pedestal Assembling 39. Insert two Small Wood Dowels (4) into the inner holes of one Bottom Side Molding (M) as a guide. Make sure that you use a small amount of glue with both ends of all dowels. Fasten the Bottom Side Molding (M) to the Left Pedestal Left Side Panel (B) using three M5 x 30 mm Screws (7). Tighten all the screws with a Phillips Screwdriver. 40. Gently tap two Floor Protectors (17) onto the bottom of Pedestal Left Side Panel (B). Make sure the Floor Protectors rest on the center of side panel for avoiding any damage or crack. 41. Repeat last two steps with the Left Pedestal Right Side Panel (C). M B C M 4 B/C M Insert one Large Wood Dowel (3) into the middle large hole of one Bottom Front/Back Molding (L) and attach to one Left Pedestal Bottom Stretcher (D) using two Cam Locks (1). Ensure the Cam Locks will face the floor. (Refer to page #2 on Cam Lock system operation supplement) 43. Repeat the same procedure to attach the other Pedestal Bottom Stretcher (D) to the other Bottom Front/Back Molding. Whalen Furniture Mfg., Inc. Page 19 Factory No

20 Left Pedestal Assembling 44. Insert five Large Wood Dowels (3) into the designated large holes on the Left Pedestal Right Panel (C) as a guide. Align and attach the Pedestal Back Panel (I), Middle Crossbar (K) and 2 Bottom Stretcher assemblies to the Left Pedestal Right Panel (C) using six Cam Locks (1). Ensure the Cam Locks point towards inside of the unit. I C 45. Repeat last step to attach the Left Pedestal Left Panel (B) at the opposite end. B I Whalen Furniture Mfg., Inc. Page 20 Factory No

21 Assembly Instructions 46. Fasten the Bottom Front and Back Moldings (L) to Left Pedestal Side Panels (B and C) by attaching four Plastic Connectors (14) at the joints with two M3.5 x 12 mm Pan Head Screw (9) in each, using the pilot holes as a reference. 47. Using the pilot holes as a guide, align and attach Left Slide Track (CL) to the Right Pedestal Left Panel (E) using three M3.5 x 12 mm Screws (6) through the small holes on the track into place. Make sure the roller end of Slide Track facing forward. Tightly fasten with a Phillips Screwdriver. 48. Repeat last step to attach Right Slide Track (CR) to the Right Pedestal Right Panel (F). 49. Insert and screw Cam Bolts (2) all the way into the designated small holes on Right Pedestal Left and Right Panels (E and F) as shown in the illustration. E F 2 Whalen Furniture Mfg., Inc. Page 21 Factory No

22 Right Pedestal Assembling 50. Insert two Small Wood Dowels (4) into the inner holes of one Bottom Side Molding (M) as a guide. Fasten the Bottom Side Molding (M) to the Right Pedestal Left Side Panel (E) using three M5 x 30 mm Screws (7). Tighten all the screws with a Phillips Screwdriver. 51. Repeat last step to attach the remaining Side Molding (M) to the Right Pedestal Right Side Panel (F). 52. Gently tap two Floor Protectors (17) onto the bottom of each Right Pedestal Side Panel (E and F). Make sure the Floor Protectors rest on the center of side panel for avoiding any damage or crack. E F L Insert the Large Wood Dowel (3) into each middle hole of Right Pedestal Bottom Panel (G) as a guide. Align and attach Bottom Front and Back Moldings (L) to the Right Pedestal Bottom Panel (G) using four Cam Locks (1). Ensure the Cam Locks will point towards the bottom of unit. (Refer to page #2 on Cam Lock system operation supplement) G Whalen Furniture Mfg., Inc. Page 22 Factory No L

23 Right Pedestal Assembling 54. Insert four Large Wood Dowels (3) into the designated large holes on the Right Pedestal Right Panel (F) as a guide. Align and attach the other Pedestal Back Panel (I), Middle Crossbar (K) and Bottom Panel assembly to the Right Pedestal Right Panel (F) using six Cam Locks (1). Ensure the Cam Locks point towards inside of the unit. G K L F 55. Repeat last step to attach the Right Pedestal Left Panel (E) at the opposite end. E G/I F Whalen Furniture Mfg., Inc. Page 23 Factory No

24 Right Pedestal Assembling 56. Fasten the Bottom Front and Back Moldings (L) to Right Pedestal Side Panels (E and F) by attaching four Plastic Connectors (14) at the joints with two M3.5 x 12 mm Pan Head Screws (9) in each, using the pilot holes as a reference. 57. Extend the Door Hinges (18) and rest the Hinge Cups onto the cutouts of Door Panel (J). Secure the Door Hinges (18) in place by using two M3.5 x 12 mm Zinc Screws (5) in each. 58. Pick up the Door Panel (J) and fasten the Hinge Bases onto the Right Pedestal Right Panel (F) with the enclosed self-tapping bolts. DO NOT fully tighten the bolts. 59. Close the Door Panel (J) to double check the alignment. If you find that the door need to be adjusted slightly, please refer to the door hinge sticker on the door panel and turn the appropriate screws for a perfectly aligned door. After adjusted tighten the screws on Hinge Base to lock the hinges in place. 60. Attach the Door Knob (20) to the outside of Door Panel (J) using one 22 mm Handle Bolt (21) provided. J F J Whalen Furniture Mfg., Inc. Page 24 Factory No

25 Assembly Instructions 61. Attach separated 16 inch 2-packed Slide Tracks (X) to the Left Pedestal Right Panel (C) and Right Pedestal Left Panel (E) respectively with three M3.5 x 12 mm Pan Head Screws (9) per slide track. Ensure the opening of Slide Track facing front of the unit. 62. Insert and screw Cam Bolts (2) all the way into the designated small holes on Left Pedestal Right Panel (C) and Right Pedestal Left Panel (E) as shown in the illustration. X B X X C E 63. Attach Modesty Panel (H) between the assembled Left and Right Pedestal using four Cam Locks (1) and two Large Wood Dowels (3). (Refer to page #2 on Cam Lock system operation supplement). Make sure that you use a small amount of glue with both ends of all dowels. C H E F H 3 2 C/E B 1 Whalen Furniture Mfg., Inc. Page 25 Factory No

26 Assembly Instructions 64. Insert 6 Large Wood Dowels (3) into the top holes of the assembled unit as a guide. DO NOT put dowels into the Cam Bolt holes. Position Desk Top (A) onto the inserted Wood Dowels (3) and attach in place by engaging 11 Cam Locks (1). (Refer to page #2 on Cam Lock system operation supplement). 65. Plug Cam Caps (12) onto the visible Cams Locks (1) to conceal the Cams. A B/C/E/F/H 66. Insert drawers into desk frame. Extend the Ball Bearing Slide Tracks (V, W and X) on the Side Panels (B, C and E) all the way forward (including ball bearing cart). Then align the Slide Runners on the assembled drawers with the Slide Tracks and push the drawer carefully inside until it stops. NOTE: If they do not go smoothly, please take out and repeat the step. If you need to remove the drawer, please pull the drawer all the way out, then simultaneously push the plastic release lever of the ball bearing slides up on one side and down on the other side, and then pull it completely out. 67. To insert the assembled Right Drawer into place, tip the front of drawer down and drop the rollers of the drawer Slide Runners behind the rollers of Slide Tracks on the unit. Lift the front of the drawer up and slide it into the unit. 68. Put the rubber bumper onto each Shelf Pin (13). Open the door and insert the other end of Shelf Pins in your desired location inside the compartment. Make sure you place the Shelf Pins in the same level so the shelf is not tilted. Rest the Adjustable Shelf (N) onto the Shelf Pins installed. P3 Q F P R N S3 S2 S N Whalen Furniture Mfg., Inc. Page 26 Factory No

27 Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage your furniture s finish. Never use water to clean your furniture as it may cause damage to the finish. Always use coasters under beverage glasses and flowerpots. Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing. Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create spotting within the furniture finish. Stains or marks from crayons or ink markers will be difficult to remove. In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a professional to repair your furniture. Check bolts/screws periodically and tighten them if necessary. Further advice about wood furniture care It is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity changes can cause fading, warping, shrinking and splitting of wood. It is advised to keep furniture away from direct sunlight as sun may damage the finish. Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful tips will enhance your furniture as it ages. A Touch-up Pen has been provided to repair any small nicks or scratches that may occur during assembly or shipping. We hope you enjoy your purchase for many years. Thank you for your purchase! QUALITY GUARANTEE We are confident that you will be delighted with your Whalen Furniture purchase. Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace it for up to one (1) year from date of purchase. Every Whalen Furniture product is designed to meet your highest expectations. We guarantee that you will immediately see the value of our fine furniture. This warranty gives you specific legal rights and you may also have other rights which vary from province to province (state to state). Customer Service: :30 a.m. - 4:30 p.m. PST, Monday to Friday Whalen Furniture Mfg., Inc. Page 27 Factory No

28 IF YOU NEED TO ORDER ANY PARTS PLEASE USE THE LIST BELOW Leadenhall Collection Desk (JCS I) *JCS I-1-DT Desk Top *JCS I-25-RDB Right Drawer Bottom *JCS I-49-CB Cam Bolt *JCS I-2-LPLS Left Pedestal Left Side *JCS I-26-LDF Left Drawer Front *JCS I-50-LWD Large Wood Dowel *JCS I-3-LPRS Left Pedestal Right Side *JCS I-27-LDBF Left Drawer Box Front *JCS I-51-SWD Small Wood Dowel *JCS I-4-LPBS Left Pedestal Bottom Stretcher *JCS I-28-LDBP Left Drawer Back Panel *JCS I-52-M3.5x12ZS M3.5 x 12 mm Zinc Screw *JCS I-5-RPLS Right Pedestal Left Side *JCS I-29-LDLS Left Drawer Left Side *JCS I-53-M3.5x12BS M3.5 x 12 mm Black Screw *JCS I-6-RPRS Right Pedestal Right Side *JCS I-30-LDRS Left Drawer Right Side *JCS I-54-M5x30S M5 x 30 mm Screw *JCS I-7-RPBP Right Pedestal Bottom Panel *JCS I-31-LDB Left Drawer Bottom *JCS I-55-M5x38S M5 x 38 mm Screw *JCS I-8-MP Modesty Panel *JCS I-32-FDF File Drawer Front *JCS I-56-M3.5x12PHS M3.5 x 12 mm Pan Head Screw *JCS I-9-PBP Pedestal Back Panel *JCS I-33-FDBP File Drawer Back Panel *JCS I-57-M5x14PHS M5 x 14 mm Pan Head Screw *JCS I-10-DP Door Panel *JCS I-34-FDLS File Drawer Left Side *JCS I-58-M4x25PHS M4 x 25 mm Pan Head Screw *JCS I-11-MC Middle Crossbar *JCS I-35-FDRS File Drawer Right Side *JCS I-59-CC Cam Cap *JCS I-12-BFBM Bottom Front/Back Molding *JCS I-36-FDB File Drawer Bottom *JCS I-60-SP Shelf Pin *JCS I-13-BSM Bottom Side Molding *JCS I-37-GR Guide Rail *JCS I-61-PC Plastic Connector *JCS I-14-AS Adjustable Shelf *JCS I-38-FH File Hanger *JCS I-62-LPB Large Plastic Bracket *JCS I-15-MDF Middle Drawer Front *JCS I-39-DH Drawer Handle *JCS I-63-SPB Small Plastic Bracket *JCS I-16-MDBP Middle Drawer Back Panel *JCS I-40-DK Door Knob *JCS I-64-22HB 22 mm Handle Bolt *JCS I-17-MDLS Middle Drawer Left Side *JCS I PS 16 inch 3-packed Slides *JCS I-65-19HB 19 mm Handle Bolt *JCS I-18-MDRS Middle Drawer Right Side *JCS I-42-14BBS 14 Ball Bearing Slides *JCS I-66-FP Floor Protector *JCS I-19-MDB Middle Drawer Bottom *JCS I PS 16 inch 2-packed Slides *JCS I-67-G Glue *JCS I-20-MDBS Middle Drawer Bottom Support *JCS I-44-LST Left Slide Track *JCS I-68-TUP Touch-up Pen *JCS I-21-RDF Right Drawer Front *JCS I-45-RST Right Slide Track *JCS I-69-DH Door Hinge *JCS I-22-RDBP Right Drawer Back Panel *JCS I-46-LSR Left Slide Runner *JCS I-70-MPB Medium Plastic Bracket *JCS I-23-RDLS 23 Right Drawer Left Side *JCS I-47-RSR 47 Right Slide Runner *JCS I-CH CH Complete Hardware *JCS I-24-RDRS Right Drawer Right Side *JCS I-48-CL Cam Lock

Leadenhall Collection Hutch Model # JCS H

Leadenhall Collection Hutch Model # JCS H LOT NUMBER: DATE PURCHASED: / / Leadenhall Collection Hutch ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES AS RECEIVED If you have any questions regarding assembly

More information

Jasper Chrome & Glass Desk Model # ODUS-CGTD

Jasper Chrome & Glass Desk Model # ODUS-CGTD LOT NUMBER: DATE PURCHASED: / / Jasper Chrome & Glass Desk ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES AS RECEIVED If you have any questions regarding assembly

More information

Steele TV Stand Stock # BH

Steele TV Stand Stock # BH LOT NUMBER: DATE PURCHASED: / / Steele TV Stand Stock # BH46-084-899-02 ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store

More information

Samford Contemporary Computer Desk Model # JCS AD

Samford Contemporary Computer Desk Model # JCS AD LOT NUMBER: DATE PURCHASED: / / Samford Contemporary Computer Desk ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES AS RECEIVED If you have any questions regarding

More information

Raine File White Model # SPLS-RFL-WH

Raine File White Model # SPLS-RFL-WH LOT NUMBER: DATE PURCHASED: / / Raine File White ADULT ASSEMBLY REQURED f you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased.

More information

Belhaven Executive Desk Model # BEHED

Belhaven Executive Desk Model # BEHED LOT NUMBER: DATE PURCHASED: / / Belhaven Executive Desk ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased.

More information

TV Console Model # AVCLEC60-DB

TV Console Model # AVCLEC60-DB LOT NUMBER: DATE PURCHASED: / / TV Console ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased. Please

More information

Braxton 7-pc Dining Set (Chair) Model # BRA7PD-E

Braxton 7-pc Dining Set (Chair) Model # BRA7PD-E LOT NUMBER: DATE PURCHASED: / / Braxton 7-pc Dining Set (Chair) ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where

More information

Media Fireplace Console Stock # WMFP48FH-10

Media Fireplace Console Stock # WMFP48FH-10 LOT NUMBER: DATE PURCHASED: / / Media Fireplace Console ADULT ASSEMBLY AND SET-UP REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where

More information

Belhaven Workstation Model # BEHWS

Belhaven Workstation Model # BEHWS LOT NUMBER: DATE PURCHASED: / / Belhaven Workstation ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased.

More information

Dalton Park 5pc Dining Set

Dalton Park 5pc Dining Set Stock #: BH12-084-499-04 Lot Number: Date Purchased: Date 2014-09-10 Rev. 2 Factory: WOFUVI THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. STOP

More information

Raine Desk White Model #SPLS-RDS-WH

Raine Desk White Model #SPLS-RDS-WH LOT NUMER: DATE PURCHASED: / / Raine Desk White ADULT ASSEMLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased.

More information

Avignon 5-pc Dining Set (Side Chair) Model # AN5PD

Avignon 5-pc Dining Set (Side Chair) Model # AN5PD LOT NUMBER: DATE PURCHASED: / / Avignon 5-pc Dining Set (Side Chair) ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where

More information

Victory 7-pc Dining Set (Table) Model # VIC7PD-S

Victory 7-pc Dining Set (Table) Model # VIC7PD-S LOT NUMBER: DATE PURCHASED: / / Victory 7-pc Dining Set (Table) ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where

More information

Pearson Open Bookcase Model # PSBK

Pearson Open Bookcase Model # PSBK LOT NUMBER: DATE PURCHASED: / / Pearson Open Bookcase ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased.

More information

TV Console Model # AVCBEC60-SMB

TV Console Model # AVCBEC60-SMB LOT NUMER: DATE PURCHASED: / / TV Console ADULT ASSEMLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased. Please

More information

Triton Wood Veneer Bookcase Model # ODUS-TWVB

Triton Wood Veneer Bookcase Model # ODUS-TWVB Triton Wood Veneer Bookcase LOT NUMBER: DATE PURCHASED: / / ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was

More information

Mercer Dining Bench Stock # BH

Mercer Dining Bench Stock # BH LOT NUMBER: DATE PURCHASED: / / Mercer Dining Bench ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased.

More information

Belhaven Open Bookcase Model # BEHBK

Belhaven Open Bookcase Model # BEHBK LOT NUMBER: DATE PURCHASED: / / Belhaven Open Bookcase ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased.

More information

Base Cabinet w/drawers

Base Cabinet w/drawers Base Cabinet w/drawers WSBC-4C Dark Cherry finish WSBC-4W White finish ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES AS RECEIVED Pacific Standard Time: 8:30 a.m.

More information

ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS SKU # 693964 Model #WSFP46ECHD-8 ASSEMBLY INSTRUCTIONS Grafton 46 inch Media Console Infrared Electric Fireplace in Medium Brown Finish Questions, problems, missing parts? Before returning to the store,

More information

Menards_ BARSTON 42'' DUAL-USE FIREPLACE Model # WS /WS

Menards_ BARSTON 42'' DUAL-USE FIREPLACE Model # WS /WS LOT NUMBER: DATE PURCHASED: / / Menards_ BARSTON 42'' DUAL-USE FIREPLACE ADULT ASSEMBLY AND SET-UP REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item

More information

Big Sky Counter Height Table

Big Sky Counter Height Table LOT NUMBER: ATE PURCHASE: / / Big Sky Counter Height Table Model # BSKY-6806 AULT ASSEMBLY REQUIRE If you have any questions regarding assembly or if parts are missing, O NOT return this item to the store

More information

Leland 42" Fireplace Console

Leland 42 Fireplace Console LOT NUMBER: DATE PURCHASED: / / Leland 42" ireplace Console Model # WS42OW23W ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the

More information

Sumner Corner Media Fireplace Stock # SUMCMF-23

Sumner Corner Media Fireplace Stock # SUMCMF-23 LOT NUMBER: DATE PURCHASED: / / Sumner Corner Media Fireplace ADULT ASSEMBLY AND SET-UP REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store

More information

Media Fireplace Console Stock # MFC-23

Media Fireplace Console Stock # MFC-23 LOT NUMBER: DATE PURCHASED: / / Media Fireplace Console Stock # MFC- ADULT ASSEMBLY AND SET-UP REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to

More information

Stanford Fireplace Console Model # GOE57CON26FP

Stanford Fireplace Console Model # GOE57CON26FP LOT NUMBER: DATE PURCHASED: / / Stanford Fireplace Console ADULT ASSEMBLY AND SET-UP REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store

More information

Menards_ GLENMORE 60'' MEDIA FIREPLACE Model # WS /WS

Menards_ GLENMORE 60'' MEDIA FIREPLACE Model # WS /WS LOT NUMBER: DATE PURCHASED: / / Menards_ GLENMORE 60'' MEDIA FIREPLACE ADULT ASSEMBLY AND SET-UP REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to

More information

Santa Fe Kitchen Cart with Metal Shelves Stock # SFKCWMS

Santa Fe Kitchen Cart with Metal Shelves Stock # SFKCWMS LOT NUMBER: TE PURHSE: / / Santa Fe Kitchen art with Metal Shelves ULT SSEMBLY REQUIRE If you have any questions regarding assembly or if parts are missing, O NOT return this item to the store where it

More information

Autumn Lane 5-pc Dining Set Stock # BH

Autumn Lane 5-pc Dining Set Stock # BH LOT NUMBR: DAT OF PURCHAS: / / Autumn Lane 5-pc Dining Set ADULT ASSMBLY RQUIRD If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased.

More information

CHARLESTON 54'' Media Fireplace Model # WS FP

CHARLESTON 54'' Media Fireplace Model # WS FP LOT NUMBER: DATE PURCHASED: / / CHARLESTON 54'' Media Fireplace Model # WS3062426FP ADULT ASSEMBLY AND SET-UP REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return

More information

Academy Work Center Model # SPUS-ACA-D

Academy Work Center Model # SPUS-ACA-D LOT NUMBER: DTE PURCHSED: / / cademy Work Center DULT SSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased.

More information

9 Piece Counter Height Dining Set

9 Piece Counter Height Dining Set 9 Piece ounter Height Dining Set ITM. / ART. 2000706 Model # SAV9PH-N ASSEMLY INSTRUTIONS IMPORTANT, RETAIN FOR FUTURE REFERENE: READ AREFULLY If you have any questions regarding assembly or if parts are

More information

Geneva Workstation Model #: Made in China

Geneva Workstation Model #: Made in China ASSEMBLY INSTRUCTIONS Geneva Workstation Model #: 6278-544 Made in China THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Lot Number: Date Purchased:

More information

TV Console. ITM. / ART Model # DER66C-R1 ASSEMBLY INSTRUCTIONS IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY

TV Console. ITM. / ART Model # DER66C-R1 ASSEMBLY INSTRUCTIONS IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY LOT NUMBER: DATE PURCHASED: / / TV Console ITM. / ART. 1129857 Model # DER66C-R1 ASSEMBLY INSTRUCTIONS IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY If you have any questions regarding assembly

More information

Bookcase ITM. / ART Model # KARLBK-N1 ASSEMBLY INSTRUCTIONS

Bookcase ITM. / ART Model # KARLBK-N1 ASSEMBLY INSTRUCTIONS Bookcase ITM. / ART. 1158049 Model # KARLBK-N1 ASSEMBLY INSTRUCTIONS IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY If you have any questions regarding assembly or if parts are missing, DO NOT

More information

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY LOT NUMER: DTE PURCHSED: / / Savonne 9 Piece Counter Height Dining Set ITM. / RT. 844024 (U.S., Costco.com, Taiwan) ITM. / RT. 924710 (Mexico, CostcoMX.com) Model # SV9PCH SSEMLY INSTRUCTIONS IMPORTNT,

More information

Metro 3-in-1 TV Console (SMXL-6)

Metro 3-in-1 TV Console (SMXL-6) Metro 3-in-1 TV Console (SMXL-6) LOT NUMBER: DATE PURCHASED: / / This item is designed to be 3-in-1 configuration. Please choose which of the 3 options suits your needs. DO NOT discard any of the hardware

More information

Sheldon 48" Fireplace Model # WSF48SH26C # WSF48SH26M

Sheldon 48 Fireplace Model # WSF48SH26C # WSF48SH26M LOT NUMBER: DATE PURCHASED: / / Sheldon 48" Fireplace Model # WSF48SH26C # WSF48SH26M ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item

More information

Sagemoor 2-pk Dining Chairs

Sagemoor 2-pk Dining Chairs LOT NUMR: DAT PURHASD: / / Sagemoor 2-pk Dining hairs Model # SAG2PK- ASSMLY INSTRUTIONS IMPORTANT, RTAIN FOR FUTUR RFRN: RAD ARFULLY If you have any questions regarding assembly or if parts are missing,

More information

54" 3-in-1 TM Console Model # XLMEC54-LR U.S. Patents 8,079,311 & 8,191,485

54 3-in-1 TM Console Model # XLMEC54-LR U.S. Patents 8,079,311 & 8,191,485 LOT NUMBER: DATE PURCHASED: / / 54" 3-in-1 TM Console U.S. Patents 8,079,311 & 8,191,485 This item is designed to be a 3-in-1 configuration. Please choose the option that best suits your needs. DO NOT

More information

2 ADULTS REQUIRED FOR ASSEMBLING

2 ADULTS REQUIRED FOR ASSEMBLING 2 ADULTS REQUIRED FOR ASSEMBLING If you have any questions regarding assembly or if you are missing parts, do not return this item to Retailer Store Please call our customer service number and have your

More information

Santa Fe 3-in-1 TM Console Stock # XLSFEC54-WN U.S. Patent 8,622,005

Santa Fe 3-in-1 TM Console Stock # XLSFEC54-WN U.S. Patent 8,622,005 LOT NUMBER: DATE PURCHASED: / / Santa Fe 3-in-1 TM Console U.S. Patent 8,22,00 This item is designed to be a 3-in-1 configuration. Please choose the option that best suits your needs. DO NOT discard any

More information

9-piece Dining Set. ITM. / ART Model # CSC9PD-3 ASSEMBLY INSTRUCTIONS IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY

9-piece Dining Set. ITM. / ART Model # CSC9PD-3 ASSEMBLY INSTRUCTIONS IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY 9-piece Dining Set ITM. / RT. 1158046 Model # CSC9PD-3 SSEMLY INSTRUCTIONS IMPORTNT, RETIN FOR FUTURE REFERENCE: RED CREFULLY If you have any questions regarding assembly or if parts are missing, DO NOT

More information

Ottoman Gaming Chair Model #WC-502D

Ottoman Gaming Chair Model #WC-502D LOT NUMBER: DTE PURHSED: / / Ottoman Gaming hair Model #W-502D DULT SSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it

More information

B. Side Panel. E. Middle Panel 1 pc. 1 pc. 1 pc. S. Side Rack. 1 pc. T. Base Rack. U. Pipe 3 pcs. M6x35 Head Cap Bolt 14 pcs.

B. Side Panel. E. Middle Panel 1 pc. 1 pc. 1 pc. S. Side Rack. 1 pc. T. Base Rack. U. Pipe 3 pcs. M6x35 Head Cap Bolt 14 pcs. IMPORTANT 88 5089 95C Kitchen Cart Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly

More information

2 ADULTS REQUIRED FOR ASSEMBLING

2 ADULTS REQUIRED FOR ASSEMBLING 2 ADULTS REQUIRED FOR ASSEMBLING If you have any questions regarding assembly or if you are missing parts, do not return this item to Retailer Store Please call our customer service number and have your

More information

Kitchen Island IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches o

Kitchen Island IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches o 88 5170 943 Kitchen Island IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these

More information

Signa Gaming Theater TM 3-in-1 TM TV Stand Model # SIG3IN1CGT U.S. Patents 8,079,311 & 8,191,485 and other Patent Pending

Signa Gaming Theater TM 3-in-1 TM TV Stand Model # SIG3IN1CGT U.S. Patents 8,079,311 & 8,191,485 and other Patent Pending LOT NUMBER: DATE PURCHASED: / / Signa Gaming Theater TM 3-in-1 TM TV Stand Model # SIG3IN1CGT U.S. Patents 8,079,311 & 8,191,485 and other Patent Pending This item is designed to be a 3-in-1 configuration.

More information

Graysen Manager s Chair Model # WC-666

Graysen Manager s Chair Model # WC-666 LOT NUMBER: DATE PURCHASED: / / Graysen Manager s Chair ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES AS RECEIVED. If you have any questions regarding assembly or

More information

Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or oth

Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or oth 88 5076 691 Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occurring to the parts. We have taken great

More information

Please read these instructions before use and keep for future reference

Please read these instructions before use and keep for future reference Wardrobe Assembly Guide Allen Key Provided (if required) Philips Screwdriver Required Hammer Required Please read these instructions before use and keep for future reference Caution! Two Person Assembly

More information

Hastings 3-in-1 Gaming Theater TM Console Model # HST3IN1C U.S. Patents 8,079,311 & 8,191,485 and other Patent Pending

Hastings 3-in-1 Gaming Theater TM Console Model # HST3IN1C U.S. Patents 8,079,311 & 8,191,485 and other Patent Pending LOT NUMBER: DATE PURCHASED: / / Hastings 3-in-1 Gaming Theater TM Console U.S. Patents 8,079,311 & 8,191,485 and other Patent Pending This item is designed to be a 3-in-1 configuration. Please choose the

More information

J. Shelf 4 pcs. L. Door. K. Door. 1 pc. Magnet. 2 pcs. Adjustable Pin. 16 pcs. (+1 extra)

J. Shelf 4 pcs. L. Door. K. Door. 1 pc. Magnet. 2 pcs. Adjustable Pin. 16 pcs. (+1 extra) 88 5523 61 Buffet IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly

More information

Display-Top Apothecary Cabinet. Assembly Instructions. Page 1

Display-Top Apothecary Cabinet. Assembly Instructions. Page 1 Display-Top Apothecary Cabinet Assembly Instructions Page 1 Display-Top Apothecary Cabinet Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean,

More information

Pedestal Desk. D. Side Panel 1 pc. E. Side Panel. I. Back Panel. 2 pcs.

Pedestal Desk. D. Side Panel 1 pc. E. Side Panel. I. Back Panel. 2 pcs. IMPORTANT 88 5530 182 Pedestal Desk Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these

More information

Pedestal Desk IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches

Pedestal Desk IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches 88 5549 181 Pedestal Desk IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have taken

More information

Flat Panel Console (PRO-9)

Flat Panel Console (PRO-9) LOT NUMBER: DATE PURCHASED: / / Flat Panel Console (PRO-9) Entertainment Center MADE IN CHINA Model: PRO-9 IMPORTER: COMERCIALIZADORA MÉXICO AMERICANA, S. DE R.L. DE C.V. AV. NEXTENGO NO. 78 COL. SANTA

More information

For assembly see instructions in carton

For assembly see instructions in carton 88 5523 943 Kitchen Island IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occurring to the parts. We have

More information

Copyright 2010, by Walker Edison Furniture Co., LLC. All rights reserved.

Copyright 2010, by Walker Edison Furniture Co., LLC. All rights reserved. General Assembly Guidelines I. Insure that all parts and hardware are available before beginning assembly. II. III. IV. Follow each step carefully to insure the proper assembly of this product. Two people

More information

C. Side Panel 1 pc. B. Side Panel. 1 pc. J2. Shelf. 4 pcs. Adjustable Pin 24 pcs. (+1 extra) M3.5x16 Wood Screw 20 pcs. (+1 extra) 2 pcs.

C. Side Panel 1 pc. B. Side Panel. 1 pc. J2. Shelf. 4 pcs. Adjustable Pin 24 pcs. (+1 extra) M3.5x16 Wood Screw 20 pcs. (+1 extra) 2 pcs. IMPORTANT 20 05180 0307 Hutch Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly

More information

Barnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratch

Barnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratch 88 5516 653 Barnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have

More information

Left Unit. G. Shelf 1 pc. Small Cam Lock 6 pcs.(+1 extra) Cam Lock Screw 2 pcs.(+1 extra) Cam Lock Screw 6 pcs.(+1 extra)

Left Unit. G. Shelf 1 pc. Small Cam Lock 6 pcs.(+1 extra) Cam Lock Screw 2 pcs.(+1 extra) Cam Lock Screw 6 pcs.(+1 extra) 88 5180 181 Art & Craft Computer Desk (Cottage Oak) IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring

More information

Laminate Cabinet Installation Instructions

Laminate Cabinet Installation Instructions Laminate Cabinet Installation Instructions www.easygaragestorage.com/installation How To Use These Instructions Thank you for your purchase! Please read each step of this manual thoroughly to ensure proper

More information

Colonial Classic Bar

Colonial Classic Bar 88 5528 991 Colonial Classic Bar IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts.

More information

Whalen Furniture Mfg. Factory No. 5 Page # 1

Whalen Furniture Mfg. Factory No. 5 Page # 1 If you have any questions regarding assembly or if you are missing parts, do not return this item to Sam s Wholesale Club Please call our customer service number and have your instructions and parts list

More information

Tuscany 32" x 79" Open Bookcase

Tuscany 32 x 79 Open Bookcase Tuscany 32" x 79" Open Bookcase ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES If you have any questions regarding assembly or if you are missing parts, do not return

More information

Expandable Bar Cabinet CF4001

Expandable Bar Cabinet CF4001 Expandable Bar Cabinet CF4001 Congratulations! You have purchased a stylish piece of Crosley Furniture. We strive to provide fine furniture products, built with quality materials and hand finished details.

More information

C PART LIST HARDWARE LIST. Kitchen Cart IMPORTANT NOTE

C PART LIST HARDWARE LIST. Kitchen Cart IMPORTANT NOTE 88 9200 006C Kitchen Cart IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken

More information

Closet Wall Drawer Unit

Closet Wall Drawer Unit IMPORTANT 88 5531 752 Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions

More information

RYAN 6 DRAWER TALLBOY PARTS LIST

RYAN 6 DRAWER TALLBOY PARTS LIST RYAN 6 DRAWER TALLBOY Congratulations on your purchase of your RYAN 6 DRAWER TALLBOY. The RYAN Collection is made in New Zealand from 100% New Zealand made MDF an environmentally sound and renewable resource.

More information

Should you experience any missing or damaged parts, do not return to the store. Please contact us directly at

Should you experience any missing or damaged parts, do not return to the store. Please contact us directly at Congratulations! You have purchased a stylish piece of Crosley Furniture. We strive to provide fine furniture products, built with quality materials and hand finished details. Please carefully follow the

More information

White Black Espresso Corner Desk Assembly Instructions

White Black Espresso Corner Desk Assembly Instructions White Black Espresso Corner Desk Assembly Instructions Page 1 White / Black / Espresso Corner Desk Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on

More information

FA968800TX Manchester Fireplace Console - Brown Mahogany Assembly Instructions

FA968800TX Manchester Fireplace Console - Brown Mahogany Assembly Instructions FA968800TX Manchester Fireplace Console - Brown Mahogany Assembly Instructions For assistance with assembly, contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com www.seidal.com

More information

MH60/MH72 DESK HUTCH IMPORTANT!

MH60/MH72 DESK HUTCH IMPORTANT! MH60/M2 DESK HUTCH IMPORTANT! Assembly may require the assistance of another person. Before you begin assembly: READ THE DIRECTIONS all the way through one time. This will speed up the process and help

More information

Thanks for shopping with Improvements! Mandarin Tansu Step Cabinet Item #512735

Thanks for shopping with Improvements! Mandarin Tansu Step Cabinet Item #512735 Thanks for shopping with Improvements! Mandarin Tansu Step Cabinet Item #512735 This unit can be assembled so the top and middle cabinets are on the left or on the right. Use these instructions for a right-sided

More information

WARM SHAKER / NORFOLK / LEXINGTON TV MEDIA STAND

WARM SHAKER / NORFOLK / LEXINGTON TV MEDIA STAND SIMP II H O M E L I F E Y D E S I GN WARM SHAKER / NORFOLK / LEXINGTON TV MEDIA STAND 1/21 FOR REPLACEMENT PARTS OR HELP WITH ASSEMLY PLEASE CONTACT US AT: simpli-home.com/customer-support PLEASE ENSURE

More information

M. Door 1 Pc. 1 Pc. Door 1 Pc. 1 Pc. M3x20 Wood Screw (long) 8 Pcs. (+1 extra) M3x10 Wood Screw for Magnet 8 Pcs. (+1 extra)

M. Door 1 Pc. 1 Pc. Door 1 Pc. 1 Pc. M3x20 Wood Screw (long) 8 Pcs. (+1 extra) M3x10 Wood Screw for Magnet 8 Pcs. (+1 extra) 88 5516 653 Barnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have

More information

Streamline L-Shaped Desk

Streamline L-Shaped Desk www.teknikoffice.co.uk Teknik For all your newfangled gadgetry. Streamline L-Shaped Desk Model 5414417 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE

More information

Item # Thanks for shopping with Improvements!

Item # Thanks for shopping with Improvements! Thanks for shopping with Improvements! Hampshire -Door Cabinet Item #5505 To order, call -800-64- West Chester, OH 45069 Made in China PR-6 If you have questions regarding this product, call -800-64- Mon.-Fri.

More information

RYAN 5 DRAWER LINGERIE CHEST

RYAN 5 DRAWER LINGERIE CHEST RYAN 5 DRAWER LINGERIE CHEST Congratulations on your purchase of your 5 DRAWER LINGERIE CHEST. The RYAN Collection is made in New Zealand from 100% New Zealand made MDF an environmentally sound and renewable

More information

IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damag

IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damag IMPORTANT 20 05520 0772 Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions

More information

Storage Island. M3x25 Wood Screw for Side Panels 4 pcs. (+1 extra) Adjustable Pin 12 pcs. (+1 extra)

Storage Island. M3x25 Wood Screw for Side Panels 4 pcs. (+1 extra) Adjustable Pin 12 pcs. (+1 extra) IMPORTANT 88 5531 923 Storage Island Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these

More information

CROWN IMPERIAL ASSEMBLY INSTRUCTIONS

CROWN IMPERIAL ASSEMBLY INSTRUCTIONS CROWN IMPERIAL ASSEMBLY INSTRUCTIONS Standard Drawer Box Page 1 of 14 Standard Drawer Box Parts Parts Supplied B C D A E F G Page 2 of 14 Part Letter Part Name Quantity 300-600 Deep Pan A Base Panel 1

More information

DOREL ASIA KITCHEN CART

DOREL ASIA KITCHEN CART DOREL ASIA Model No: WM6545N (Natural) WM6545W (White) UPC CODE: 0-65857-16525-8 (Natural) 0-65857-16526-5 (White) NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND

More information

Installation Instructions

Installation Instructions by Plato Woodwork Installation Instructions Plato Woodwork, Inc. 200 Third Street SW P.O. Box 98 Plato, MN 55370 www.platowoodwork.com 800.328.5924 SECTION GUIDE GETTING STARTED PAGE # Installation Methods...

More information

Pantry IMPORTANT NOTE

Pantry IMPORTANT NOTE 88 5022 69 Pantry IPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great

More information

! WARNING: FALL HAZARD - To prevent death or serious injury from

! WARNING: FALL HAZARD - To prevent death or serious injury from pottery barn kids ARMOIRE CHANGING TABLE! WARNING: FALL HAZARD - To prevent death or serious injury from falls, always keep child within arm s reach. Read all instructions before use of the changing table.

More information

Vigilant Cigar Humidor Vault. Assembly Instructions

Vigilant Cigar Humidor Vault. Assembly Instructions Vigilant Cigar Humidor Vault Assembly Instructions Models: 1000, 1500, and 2000 Congratulations! You have purchased a superior cigar humidor. These humidors have been specifically designed to properly

More information

Assembly Instructions COMO DESK CORNER

Assembly Instructions COMO DESK CORNER Assembly Instructions COMO DESK CORNER WARNING NG FAILURE TO FOLLOW THESE BASIC STEPS CAN LEAD TO DAMAGE THAT IS NOT COVERED BY YOUR WARRANTY 2 Read Instructions carefully. Check no parts are missing.

More information

pottery barn kids MADISON CABINET HUTCH

pottery barn kids MADISON CABINET HUTCH pottery barn kids MADISON CABINET HUTCH IMPORTANT SAFETY INSTRUCTIONS: Please read all instructions carefully before assembling. For your safety, assembly by two adults is recommended. PRE-ASSEMBLY: Remove

More information

PRINCESS SINGLE BED WITH TRUNDLE

PRINCESS SINGLE BED WITH TRUNDLE PRINCESS SINGLE BED WITH TRUNDLE If you have any questions regarding assembly or if you are missing parts, do not return this item to Sam s Wholesale Club Please call our customer service number and have

More information

WARNING: Failure to follow these warnings and assembly instructions could

WARNING: Failure to follow these warnings and assembly instructions could OXFORD BUNK BED TWIN OVER TWIN & FULL OVER FULL For Bunk Bed Twin Over Twin WARNING: Failure to follow these warnings and assembly instructions could result in serious injury or death. To help prevent

More information

Sentinel Series Cigar Humidor End Tables

Sentinel Series Cigar Humidor End Tables Sentinel Series Cigar Humidor End Tables Assembly Instructions Models: Sentinel 500, 1000 and 1500 Style: Contemporary SENTINEL ASSEMBLY INSTRUCTIONS Congratulations! You have purchased a superior cigar

More information

D. Middle Panel. C. Middle Panel. 1 pc. B. Side Panel 1 pc. I. Back Stretcher. 1 pc. J. Front Stretcher. 1 pc. S. Door 1 pc. T.

D. Middle Panel. C. Middle Panel. 1 pc. B. Side Panel 1 pc. I. Back Stretcher. 1 pc. J. Front Stretcher. 1 pc. S. Door 1 pc. T. itchen Cart IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great care

More information

Hodedah ASSEMBLY INSTRUCTION HI K78 (MICROWAVE CART)

Hodedah ASSEMBLY INSTRUCTION HI K78 (MICROWAVE CART) ASSEBLY INSTRUCTION HI K8 (ICROWAVE CART) ~ Before assembly, please read the instructions ~ ~ Keep these instructions for future reference ~ ~ Follow these steps to assemble the icrowave Cart ~ FRONT VIEW

More information

E DRAWER BEDSIDE

E DRAWER BEDSIDE EPSOM collection E7102 2 DRAWER BEDSIDE Congratulations on your purchase of your EPSOM 2 DRAWER BEDSIDE. The EPSOM Collection is made in New Zealand from 100% New Zealand made MDF an environmentally sound

More information

Sentinel Series Cigar Humidor End Tables

Sentinel Series Cigar Humidor End Tables Sentinel Series Cigar Humidor End Tables Assembly Instructions Models: Sentinel 500, 1000 and 1500 Style: Traditional SENTINEL ASSEMBLY INSTRUCTIONS Congratulations! You have purchased a superior cigar

More information

SUMMIT HUTCH ASSEMBLY HARDWARE WALL MOUNTING HARDWARE TOOLS REQUIRED COMPONENTS. 4 - large. 4 - bolts 4 - flat 4 - spring small screws.

SUMMIT HUTCH ASSEMBLY HARDWARE WALL MOUNTING HARDWARE TOOLS REQUIRED COMPONENTS. 4 - large. 4 - bolts 4 - flat 4 - spring small screws. SSEMBLY HRDWRE Missing hardware? Please call 800.606.6387 for replacements. 20 - small 4 - large 4 - bolts 4 - flat 4 - spring washers washers 8 - shelf pins 4 - cam 4 - cams 2 - connecting brackets WLL

More information

TV/Media Stand- Mission Oak Finish. Assembly Instructions

TV/Media Stand- Mission Oak Finish. Assembly Instructions TV/Media Stand- Mission Oak Finish Assembly Instructions TV/Media Stand Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Before

More information