maker is selling, and the process used to achieve this look is crucial.
|
|
- Blaze Collins
- 5 years ago
- Views:
Transcription
1 WASTE REDUCTION -- POLLUTION IN THE FURNITURE AND CABINET INDUSTRIES: NEW TECHNOLOGIES FOR REDUCING FINISHING WASTES AND VOC EMISSIONS Because furniture finishing products have been traditionally solvent-based, the issue of reducing wastes from finishing products is bound up with the issue of reducing volatile organic compound (VOC) emissions. Currently, it is VOC emission regulation, much more than a concern about reducing wastes, that is driving whatever movement there is in the industry toward substitute finisiiing products and technologies. Furniture finishing, as it relates to high quality residential furniture, involves a process which may consist of steps. The process may include application of various kinds of stains, fillers, glazes sealers, wash coats, and top coats which are used to achieve a specific and distinctive final appearance. It is this distinctive appearance that the furniture maker is selling, and the process used to achieve this look is crucial. In may cases, the individual finishing processes have evolved over long periods, perhaps 50 years, and represent substantial investments on the part of the manufacturers in time and process research. The processes were developed using very specific finishing products, and while some modern finishing products-- stains, for instance--may be acceptable substitutes for 1
2 WASTE REDUCTION OPTIONS FOR COATING OPERATIONS WASTE REDUCTION ASSESSMENT AND TECHNOLOGY TRANSFER (WRATT) TELECONFERENCE MARCH , UNIVERSITY OF TENNESSEE CENTER FOR INDUSTRIU SERVICES NASHVILLE, TN BY VINCENT R. ROSS PRESIDENT ROSS ASSOCIATES, INC. 33 MINERAL SPRINGS ROAD ASHEVILLE, NC 28805
3 older ones, in many cases substitutions dramatically alter the appearance of the finished product. This is particularly true in the case of top coatings: substituting the more recently developed water-based coatings for organic solvent-borne coatings upon which the processes were originally based may change thb entire process and alter the distinctive appearance of the final product. Although some of the major finishing product manufacturers have worked on developing water-based top coats, they have been unable to achieve the clarity that many furniture manufacturers need. Some Segments of the Furniture Industry Can take Advantage of Alternative Coating Technologies Manufacturers of contemporary furniture--particularly contemporary furniture with high-gloss finishes, which is essentially constructed from panels that lend themselves to flat-line finishing, can now rely on largely non-polluting finishing processes such as ultraviolet curing and/or electron beam curing. These processes can help certain segments of the furniture industry reduce finishing wastes because they use high-solid materials and very little solvent to produce almost instantaneous cures. These processes are not suitable, however, for finishing carved furniture such as the Chippendale style. Metal furniture can be finished using powder coating and electrostatic application techniques, which again use very little solvent. Many manufacturers of juvenile furniture also successfully use electrostatic... PV",a nnt #. so much with the toxicity. These to high-quality, quality of the finish as with its nonprocesses, however, are not applicable fashion furniture.
4 So, some segments of the furniture industry can significantly reduce their use of solvents and therefore their generation of solvent waste. -However, there are few substitute products or techniques manufacturers of high-quality residential and office furniture cah take advantage of, and there seems to be little cooperation between the furniture makers and the manufacturers of finishing products to develop acceptable substitutes. The furniture makers take the position that when something satisfactory is available, they will use it, and the finishing products manufacturers take the position that it is not reamnabla to expect them to make the entire investment in research and development since they can sell their current products with no problem. Breaking out of this stand-off may require that furniture industry associations, such as the American Furniture Manufacturers Association or the National Kitchen Cabinet Association, get out front and take a proactive position on the waste reduction issue. The industry may also need help in encouraging wider adoption of the available successful techniques from universities, where a lot of the technology resides but has not been transferred. The cause of waste reduction needs to be given impetus in the furniture industry because it is going to become necessary, and there is no use in waiting until our backs are against the wall to respond. WZS 1 Drnh1-m- ran Create Unexpected Crises for Manufacturers Recently I visited a furniture plant which had just received word that the supplier of the rags used 4 3
5 in the company's wiping stain process is going out of business. The rag supplier had also been laundering the rags and had been told that their waste water treatment plant can no long comply with EPA regulations. The furniture manufacturer was faced with reevaluating its entire finishing process, which it hdd been using for many years, in two weeks. Another substance that the furniture industry is going to have to deal with soon is urea formaldehyde. Most of the glue that is used in production gluing such as veneer or plastic lamination, is based on urea formaldehyde. Regulations regarding this substance have become very stringent, about one part per million, and that's almost zero. Furniture manufacturers are going to have to address both the emission of VOCs from finishing products and glues they use and the disposal of wastes from these products. Still, no one has taken the initiative to aggressively address the issue. Some processes that are beginning to offer partial solutions to VOC and waste problems for furniture manufacturers are the new high-tech coating methods, some of which I referred to earlier. As I have explained, these new methods are excellent for some uses but totally inadequate for others, so they are not a cure-all. However, solving the problems we can solve is a first step, and more widespread adoption of these processes would certainly have benefits. The coating o Electrostatic spray coating uses the attractive force between materials of opposite electrical charge to aid in applying a 4
6 uniform coating to various surfaces. This method reduces overspray and waste, thus improving application efficiency over ordinary spray coating processes. Organic emissions are reduced because of this efficient procedure. For solvent and wate2- borne coatings, the amount of coating solids and corresponding solvent carrier needed for a specific coating job are also reduced. Electrostatic spray coating is used to apply solvent-borne, water-borne, or powder coatings. o Hot melt formulations are applied in a molten state. There is no solvent to evaporate so about 100 percent of the materials that are deposited remain as a solid part of the coating. Hot melt coatings are most Often applied to paper, paperboard, cloth, and plastic. Because hot melts work only for certain purposes, they cannot be judged universally applicable in the paper and fabric coating industry. 0 High-solids coatings reduce solvent emissions. The basic ingredient in an organic coating is the binder or resin, which is a film-forming organic polymer with glassy, plastic, or rubbery properties in the dried state. There are two categories of high solids resins: two component ambient heat converted. High-solids coatings can be used to reduce solvent emissions in a variety of industrial coating processes. 5
7 0 Electron beam curing is a process in which high energy electrons are used to cure electron beam-curable coatings. Electrons bombard a coating and produce free radicals throughout the coating, thus initiating h cross-linking reaction that continues until the coating is cured. This process is most effective on flat surfaces where the electron beam strikes the surface vertically. If the beam strikes the surface at an angle closer to horizontal, the amount of absorbed energy is too small and causes the coating to cure improperly. o Ultraviolet curing is a process in which ultraviolet light reacts with photosensitizers in the coating to initiate crosslinking to form a solid film. The main components of an ultraviolet curable coating are an ultraviolet-curable base polymer, diluent monomers, and ultraviolet photochemical initiators. Ultraviolet light for curing is useful and effective on flat surfaces where the light reaches the surface vertically. When the ultraviolet light strikes a surface at an angle closer to the horizontal, the amount of absorbed light is too small for effective curing. 6
8
9 ,, _.....I
WASTE REDUCTION - POLLUTION PREVENTION IN THE FURNITURE INDUSTRY POLLUTION PREVENTION WASTE REDUCTION FOR INDUSTRIAL AIR TOXIC EMISSIONS
WASTE REDUCTION - POLLUTION PREVENTION IN THE FURNITURE INDUSTRY POLLUTION PREVENTION WASTE REDUCTION FOR INDUSTRIAL AIR TOXIC EMISSIONS APRIL 24-25, 1989 FOUR SEASONS HOLIDAY INN GREENSBORO, NC BY VINCENT
More informationFOCUS TECHNOLOGY THE BEAUTY OF A LACQUERED SURFACE
FOCUS TECHNOLOGY FOCUS TECHNOLOGY THE BEAUTY OF A LACQUERED SURFACE Snaidero is one of the few companies on the market with more than 50 years experience in the development of lacquered kitchens. Its product
More informationBest Products to Use in a Healthcare Facility Repaint Project
Best Products to Use in a Healthcare Facility Repaint Project Introduction 03 Types of Products to Consider in Healthcare Painting Projects 04 Paints, Oil-based Paints, Water-based Paints 05 Paint Finishes,
More informationUnique Waterborne Alternatives
Unique Waterborne Alternatives MAY 8 to Traditional Solvent-based Coatings for Industrial Wood Applications By Laurie Morris Alberdingk Boley, Inc. Solvent-based varnishes and lacquers have been the coatings
More informationAdvantages of Powder Coating vs. Wet Paint
Advantages of Powder Coating vs. Wet Paint F irst pioneered in the 1950s, powder coating has evolved as a popular dry finishing process used for functional (protective) and decorative finishes in manufacturing.
More informationDecorative Coatings producers contribute to sustainable development The successful lowering of VOC contents in decorative paints
Decorative Coatings producers contribute to sustainable development The successful lowering of VOC contents in decorative paints A CEPE opinion on efforts and results related to the complying with the
More informationThe matte surface is created and protected with acrylic varnishes, the high gloss surface is proteced by pressing with melamine.
veneer Product Description The product name veneer is applied to decorative high-pressure laminates (HPL) with a face made from genuine wood veneers. veneer is composed from one type of wood or available
More informationCoatings Overview
Wood Coatings 101 Coatings 101 - Overview Understanding Valspar and the Valspar Wood Division Basic Composition of Wood Coatings Types of Professional Wood Coatings Appropriate use of Finishes Stains and
More informationThe Power of Print in Laminated Card Manufacturing
The Power of Print in Laminated Card Manufacturing ICMA EuroForum 2014-9 th / 10 th October Robin McMillan & John Schneiderhan working for you. Overview Current print processes and related inks Introduction
More informationFABRICATING ARBOR. koroseal.com/arbor Arbor Veneered Components
Arbor Veneered Components Arbor natural wood veneer can be applied to any substrate and is flexible enough to be formed around the tightest radii providing the ultimate wood finish. From vertical wall
More informationDezign A Door MD Duarte de Franca explains that the
Dezign A Door implements first automated water-based UV coating line Krugersdorp-based indoor kitchen, cupboard and built-in door manufacturer Dezign A Door reports that it is the first manufacturer in
More informationVENEERING AND LAMINATING SOLUTIONS
With over 35 years experience in the adhesives industry, Alansons have become known as a solutions provider, rather than a mere supplier of adhesive products. Nowhere is this fact better demonstrated than
More informationSutherland Welles Ltd.
Sutherland Welles Ltd. INSTRUCTIONS FURNITURE & BUILT-INS Helpful Hint! Our easliy applied Polymerized Tung Oil wiping finishes are ideal for novice finishers and for projects that have carvings, applied
More informationK.D. Feddersen Indonesia Office Adhesives
K.D. Feddersen Indonesia Office Adhesives In cooperation with Laboratorios Rayt, s.a. K.D. Feddersen Ueberseegesellschaft mbh Representative Office Indonesia Member of the Feddersen Group People. Expertise.
More informationCOMPATIBILITY WITH TIMBERS
GENERAL INSTRUCTION FOR WOOD PAINTING WITH WATERBORNE PRODUCTS Waterborne paints represent the technological future where carpenters, furniture and window makers shall address. These paints are endowed
More informationToolkit for Establishing Laws to Control the Use of Lead in Paint Module A
Toolkit for Establishing Laws to Control the Use of Lead in Paint Module A The Problem With Lead Paint 1 Outline Background Paint basics What components of paint can contain lead? Why lead paint is a problem?
More informationCopyright 2000 Society of Manufacturing Engineers. FUNDAMENTAL MANUFACTURING PROCESSES Painting & Powder Coating
FUNDAMENTAL MANUFACTURING PROCESSES Painting & Powder Coating SCENE 1. CG: FBI warning white text centered on black to blue gradient SCENE 2. CG: disclaimer white text centered on black to blue gradient
More information1. Initial Precautions 2. Technical Precautions and Suggestions 3. General Information and Cure Stages 4. Understanding and Controlling Cure Time
How to apply Arctic Silver Premium Thermal Adhesive 1. Initial Precautions 2. Technical Precautions and Suggestions 3. General Information and Cure Stages 4. Understanding and Controlling Cure Time 5.
More informationTHEIMER - lamps. The optimal type for every application. Ga - Fe doped: Multi spectrum type TH...2 Ga - Pb doped: Dual spectrum type THS...
The optimal type for every application 12 12 1 1 8 8 6 6 4 4 2 2 3 35 4 45 5 55 6 65 7 Xenon puls: For reprographic camera type KX... 3 32 34 36 38 4 42 44 46 48 5 52 54 56 58 6 Hg undoped: For UV curing
More informationInstructors Guide. Composites Fabricators Association. September, 1998
Controlled Spraying Training Instructors Guide September, 1998 Composites Fabricators Association Composites Fabricators Association 1655 N. Ft. Myer Dr., Arlington, VA 22209 (703)-525-0511 CFA 1998 CFA
More informationMold Release, Break-In, Maintenance and Storage. Linda Bergstrom
Mold Release, Break-In, Maintenance and Storage Linda Bergstrom Mold Release Requirements Form a barrier between the mold and molded part Provide a lubricating film which allows the molded part to be easily
More informationSECTION INTERIOR FINISH CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS
SECTION 062023 - INTERIOR FINISH CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationDESCRIPTION/APPLICATION HK RESEARCH GEL COATS DESCRIPTION
Product Data 908 LENOIR ROAD POST OFFICE BOX 1809 HICKORY, NORTH CAROLINA 28603-1809 TELEPHONE (828) 328-1721 TOLL FREE (800) 334-5975 FAX (828) 328-4572 DESCRIPTION/APPLICATION HK RESEARCH GEL COATS DESCRIPTION
More informationTechnical Sheet 11.11
Technical Sheet ALPIlignum 11.11 Collection Wood Grey Product ALPI Dark Grey Lati Texture Quartered Size 3150x640 mm ALPIkord 11.11 K Size 2500x1250/3050x1300 mm Wax Groove Light Gloss Bright Gloss ALPIrobur
More informationLOW VOC & BEYOND FORMALDEHYDE ABATEMENT PAINT AGENDA SATHISH KUMAR D NIPPON PAINT. Company Profile. Green Commitment. Next Level on Combating VOC
LOW VOC & BEYOND FORMALDEHYDE ABATEMENT PAINT SATHISH KUMAR D NIPPON PAINT AGENDA Company Profile Green Commitment Next Level on Combating VOC COMPANY PROFILE NIPPON PAINT Nippon Paint founded in Japan,
More informationAdhesives. Page 1 of 5
Adhesives Adhesives are not a recent development but have been in use throughout history. From the Romans that caulked their ships with beeswax and wood tar to the Egyptians that used gum from the acacia
More informationPRIMAX EXCEL THE NEW BENCHMARK IN PRIMERS FOR ENGINEERED WOOD POWDER COATING BREAKTHROUGH TECHNOLOGY
PRIMAX EXCEL THE NEW BENCHMARK IN PRIMERS FOR ENGINEERED WOOD POWDER COATING BREAKTHROUGH TECHNOLOGY FOR AN INDUSTRY THAT SEEKS EFFICIENCY There is increasing pressure in the engineered wood industry to
More informationCONVERTING RECLAIMED SCRAP PET TO USEFUL PROCESS CHEMICALS
GPEC 2004 Paper Abstract #36: EvCo Research, Inc. creating solutions... shaping the future CONVERTING RECLAIMED SCRAP PET TO USEFUL PROCESS CHEMICALS SCOTT O. SEYDEL EvCo Research specializes in using
More informationA. This Section includes surface preparation and the application of paint systems on the following substrates:
SECTION 09900 - PAINTING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification Sections, apply
More informationTHE BEAUTY OF SURFACES
No Finish Line can Highlight and Complement THE BEAUTY OF SURFACES LIKE Complete line of finishes that give ultimate control over sheen, color, contrast and tonality. Time-tested Durability Renowned as
More informationA. Section includes surface preparation and the application of paint systems on exterior substrates.
SECTION 09 91 13 - EXTERIOR PAINTING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationFEATURE-SERVICE. Clever Adhesives for High-Quality Woods. Number 2, December 2011
Wacker Chemie AG Hanns-Seidel-Platz 4 81737 München, Germany www.wacker.com FEATURE-SERVICE Number 2, December 2011 Clever Adhesives for High-Quality Woods Nature is moving into the home thanks to wood.
More informationUNITED STATES DEPARTMENT OF AGRICULTURE - FOREST SERVICE - FOREST PRODUCTS LABORATORY - MADISON, WIS RESEARCH NOTE
UNITED STATES DEPARTMENT OF AGRICULTURE - FOREST SERVICE - FOREST PRODUCTS LABORATORY - MADISON, WIS U. S. FOREST SERVICE RESEARCH NOTE May 1964 IMPROVING THE GLUING CHARACTERISTICS OF PLYWOOD SURFACES
More informationProduct Overview. Innovative engineering, quality manufacturing and dedicated support, for over 100 years.
Product Overview Innovative engineering, quality manufacturing and dedicated support, for over 100 years. Black Bros. equipment can be found worldwide, working in a variety of industries: founders 1 Furniture
More informationUnit PO0205K Knowledge of Applying Fillers and Foundation Materials
Assessment Requirements Unit PO0205K Knowledge of Applying Fillers and Foundation Materials Content: The types of substrates likely to be found in vehicle refinishing a. List types of substrate to include:
More informationTechnical Information 50.G.003 Radiation-curing Systems General Information, Services
Technical Information 50.G.003 Radiation-curing Systems General Information, Services NewV UV curing inks and varnishes for flexo printing Direction for use NewV flex_direction for use 06/2017 en TABLE
More informationRoll Coater and Adhesive Spreader Roll Arrangements
Corporate Headquarters BLACK BROS. CO. 501 Ninth Avenue P.O. Box 410 Mendota, IL 61342-0410 Phone: 815.539.7451 Fax: 815.538.2451 www.blackbros.com info@blackbros.com Southeast BLACK BROS. CO. SOUTHEAST
More informationTechnical Sheet 10.74
Technical Sheet ALPIlignum 10.74 Collection Wood Evergreen/Legacy Curated by Piero Lissoni Product ALPI Teak Texture Quartered Size 3150x640 mm ALPIkord 10.74 K Size 2500x1250/3050x1300 mm Wax Groove Light
More informationWhat paint can do Part 3
What paint can do Part 3 In addition to pure color pigments, there are also special-effect pigments. A very prominent type of effect pigment is a metallic effect. Here, small aluminum flakes in the paint
More informationWhat paint can do Part 2
What paint can do Part 2 Paint raw materials How can the properties of the individual paint layers be achieved? To answer this question, let's peek into a paint can and take a closer look at the individual
More informationCan Prepainted Metal Benefit Your Production Process? Technical Paper
Can Prepainted Metal Benefit Your Production Process? Technical Paper Today, an increasing number of end-use manufacturers are converting to prepainted metals to achieve multiple production benefits, from
More informationMarble Magik Corporation
+91-8048756405 Marble Magik Corporation https://www.magikgroup.in/ We Marble Magik Corporation are one of the leading manufacturers and suppliers of wide range water base GREEN PRODUCT of marble care products.
More informationHandbook for zero microplastics from textiles and laundry
Handbook for zero microplastics from textiles and laundry Good practice guidelines for the textile industry 1. Explanation of the topic and purpose of the guidelines Polyester and acrylic are the main
More informationENERGY SCIENCES INC. EB COATING DEVELOPMENTS FOR GRAPHIC ARTS
ENERGY SCIENCES INC. EB COATING DEVELOPMENTS FOR GRAPHIC ARTS WHAT IS EB? INNOVATIVE METHOD OF IMMEDIATELY DRYING INKS COATINGS ADHESIVES WITHOUT HEAT OR LIGHT. HOW DOES AN E-BEAM WORK? Ø FILAMENTS EMIT
More informationGreen Label Product Paints (TGL-4-R4-14)
Green Label Product Paints (TGL-4-R4-14) Revision Approved on 24 July 2014 Thailand Environment Institute (TEI) 16/151 Muang Thong Thani, Bond Street, Bangpood, Pakkred, Nonthaburi 11120 Thailand Phone:
More informationUNIT TITLE: KNOWLEDGE OF APPLYING FILLERS AND FOUNDATION MATERIALS
UNIT REF: PO0205K UNIT TITLE: KNOWLEDGE OF APPLYING FILLERS AND FOUNDATION MATERIALS Level: 2 Route: Knowledge Credit Value: 6 GLH: 45 Mapping: This unit is mapped to the IMI NOS PO2 and PO5 Rationale:
More informationPREPAINT VS. POST-PAINT DURING THE PRODUCTION PROCESS CONSIDERATIONS FOR CONVERTING TO SHERWIN- WILLIAMS COIL COATINGS PREPAINTED METAL.
PREPAINT VS. POST-PAINT DURING THE PRODUCTION PROCESS CONSIDERATIONS FOR CONVERTING TO SHERWIN- WILLIAMS COIL COATINGS PREPAINTED METAL White Paper OVERVIEW Today, an increasing number of end-use manufacturers
More informationTimber Floors & Floor Finishes
Timber Floors & Floor Finishes Australian Timber Flooring Association ABN 16 524 524 226 11 Oleander Avenue Shelley Beach Qld 4551 Email flierman@ozemail.com.au 1.0 INTRODUCTION This data sheet outlines
More informationFinish System Identification Numbers
Finish System Identification Numbers The Architectural Woodwork Institute (AWI) has developed a numbering system for identifying different finishes that are available in the wood finishing industry. The
More information+91-8048077796 Astra Chemtech Private Limited http://www.astrachemtech.com/ Valued as a reliable manufacturer and exporter, we are engaged in offering the premium quality of Adhesives & Chemicals. Owing
More informationDESIGNER EDITION L EXINGTON
DESIGNER EDITION L EXINGTON U.S. GREEN BUILDING COUNCIL R COMMERCIAL GRADE FINISH High performance finish is ideally suited for high traffic commercial areas, thanks to the abrasion resistant and anti-microbial
More informationFinishes and Finishing Techniques
Finishes and Finishing Techniques TED 126 Spring 2007 Review pages 147-150, 284-294 Finishes and finishing techniques The finishing process to choose depends partly on the type of wood and the appearance
More informationEXTERIOR PAINTING
SECTION 099113 - EXTERIOR PAINTING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationUnion County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 099123 - INTERIOR PAINTING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationA. Section includes surface preparation and the application of paint systems on the following exterior substrates: 1. Steel and iron.
Farmington, Missouri Project Number M1801~01 PART 1 ~GENERAL 1.1 RELATED DOCUMENTS Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationINSPIRED INTERIOR FLAT
INSPIRED ODOR* INSPIRED INTERIOR FLAT may Self-priming over surfaces previously painted with water-based paint. For the best finish over new drywall or plaster, prime with Colorhouse Multi-Purpose Primer.
More informationUV TECHNOLOGY. Relatively new, but rapidly emerging technology. AZON Q UV PRODUCT CATALOG
UV TECHNOLOGY Relatively new, but rapidly emerging technology. UV curing has been widely adopted in many industries including automotive, telecommunications, electronics, graphic arts, converting and metal,
More informationEB Gravure Novel Printing Concept for Sustainable Packaging
EB Gravure Novel Printing Concept for Sustainable Packaging Mikhail Laksin, Sean Evans, Ken Fontaine and Subh Chatterjee Amgraph Packaging, Versailles, CT and IdeOn LLC, Hillsborough, NJ USA Abstract Packaging
More informationAdhesives and Glues 1
Adhesives and Glues 1 Definition An adhesive is a compound that adheres or bonds two items together. The use of the terms adhesive and glue is confused. Historically natural compounds used as an adhesive
More informationDefinitions. Forestry 240 Wood Science
Definitions Forestry 240 Wood Science Chapter 15 Nonstructural Panels Panel products made from wood-based veneer and particle products that are not suitable for structural applications. Used for Decorative
More informationThis increased demand
R E P O R T WOOD FINISHES AND STAINS FEBRUARY 2005 The overall market for wood finishes -- coatings which, unlike paint, do not completely mask the wood s appearance -- has been growing, along with the
More informationJowat Information. Textile Industry. Thermoplastic Hot hot melts Melts Pressure-sensitive Hot hot melts Melts Dispersions
Textile Industry Reactive Hot hot melts Melts Thermoplastic Hot hot melts Melts Pressure-sensitive Hot hot melts Melts Dispersions PUR Tex Jowat adhesives Adhesives in the textile Textile industry Industry
More informationKirei Board. zen modern. Architectural Millwork Interior Design Wall Covering Cabinetry Retail Displays Flooring. Finished Products Hotel
Kirei Board zen modern Kirei Board is a strong, lightweight, durable, environmentally friendly substitute for wood usable in furniture, cabinetry, casework, and interior design elements. Manufactured from
More informationHenkel s innovation engine hits full speed
Press release April 26 th 2017 Ligna 2017: High-performance adhesives from Henkel new developments, new applications Henkel s innovation engine hits full speed Hannover Henkel has a long history as a trusted
More informationSHER-WOOD FINISHING SYSTEMS
FINISHING SYSTEMS F o r p r o f e s s i o n a l w o o d f i n i s h e r s TYPICAL APPLICATIONS WOOD NOVELTIES STANDARD ARCHITECTURAL PREMIUM WOODWORKING Knock-down furniture Casework Cabinetry Kitchen
More informationIndustrial wood. Technically advanced and environmentally friendly solutions for machine manufactured and hand-crafted joinery.
Industrial wood Technically advanced and environmentally friendly solutions for machine manufactured and hand-crafted joinery Pioneers in in We have been providing high quality, water-based and environmentally
More informationProduct Considerations Other Than Color When Planning a Commercial Repaint Project
Product Considerations Other Than Color When Planning a Commercial Repaint Project Introduction 03 Time to Repaint Your Commercial Property 04 Let s Get Started 05 Who Will Do The Work? 05 Planning a Commercial
More informationPaint Masks - Stencils - Dry Rub Decals - Waterslides +44(0) (mobile)
Paint Masks - Stencils - Dry Rub Decals - Waterslides Telephone: Website: email: +44(0)7872 181119 (mobile) http://www.flightlinegraphics.com sales@flightlinegraphics.com Dry Rub Decals Dry rub decals
More informationOptimal dispersion. Seite/Page: 144
Optimal dispersion Latex/pigment composite particles improve waterborne paints. The quality of paint is to a large degree dependent on the quality of the pigment particles dispersion. Latex particles containing
More informationReport No. 83 ADHESIVES. February A private report by the PROCESS ECONOMICS PROGRAM PARK, CALIFORNIA STANFORD RESEARCH INSTITUTE I
Report No. 83 ADHESIVES by WING SIEN FONG February 1973 A private report by the PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE I MENLO PARK, CALIFORNIA CONTENTS 1 INTRODUCTION........................
More informationDesign Analysis Process
Prototype Design Analysis Process Rapid Prototyping What is rapid prototyping? A process that generates physical objects directly from geometric data without traditional tools Rapid Prototyping What is
More informationCoatings. Industrial wood. Technically advanced and environmentally friendly solutions for machine manufactured and hand-crafted joinery
Industrial wood Coatings Banbury, England 01608 683 494 sales@teknos.co.uk Livingston, Scotland 01506 436 222 sales.scotland@teknos.co.uk Magherafelt, Ireland 02879 301 472 sales.ireland@teknos.co.uk Technically
More informationIndustry Related Manufacturing Technology
Industry Related Manufacturing Technology Focus Area: Timber Products and Furniture Technologies (Preliminary) Materials Timber and timber products structure: sapwood heartwood earlywood latewood cambium
More informationSOLUTIONS, MACHINERY AND PLANTS FOR TEXTILE AND FOR NONWOVEN SINCE 1953
SOLUTIONS, MACHINERY AND PLANTS FOR TEXTILE AND FOR NONWOVEN SINCE 1953 Italian Quality in Machinery Construction Sicam s.r.l. (Società italiana Costruzioni Aeromeccaniche); via Selvanesco 57-20141-Milano-Italia;
More informationRENOVATING WOOD. 2 - Planning your work
RENOVATING WOOD Renovating wood is not difficult, but it does require patience and application. Don't be tempted to work on fine or antique furniture - leave that to the experts! Always wear a face mask
More informationAN UPDATE ON THE CURRENT MARKET SITUATION FOR UV/EB CURING AND AN INSIGHT INTO THE DEVELOPMENT OF NEW MARKETS FOR UV/EB PROCESSING
AN UPDATE ON THE CURRENT MARKET SITUATION FOR UV/EB CURING AND AN INSIGHT INTO THE DEVELOPMENT OF NEW MARKETS FOR UV/EB PROCESSING David Harbourne Heraeus Noblelight Fusion UV Inc. 910 Clopper Road Gaithersburg,
More informationAutomotive Refinish Terminology
Automotive Refinish Terminology Accelerator: A substance that when added to a paint will speed up the rate of cure. Acetone: A very fast evaporating solvent with high solvency for certain types of compounds
More informationKent Kings Cross Bench KKCB5500
Kings Cross Bench Kent Kings Cross Bench Specify: Kent Kings Cross Bench ; 5500mm overall length; European Oak Timber (IFSE Certified) treated with Danish Oil; Grade 316L Stainless Steel; Bead Blasted
More informationConcurrent Engineering
DENSO MANUFACTURING: A FORMULA FOR SUCCESS WHAT S DRIVING OUR GLOBAL MOMENTUM? Cars are now being designed to accommodate an ever-growing array of new functions and capabilities. This alone is supporting
More informationPaints and varnishes Corrosion protection of steel structures by protective paint systems. Part 5: Protective paint systems
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 12944-5 Third edition 2018-02 Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 5: Protective paint
More informationFURNITURE & BEDDING. Nonwovens
FURNITURE & BEDDING Nonwovens 2 EDILFLOOR SPA Edilfloor is today one of the main suppliers of needlepunched technical textiles to the European upholstery and furniture industry. Edilfloor supplies several
More informationCOLORS & FINISHES SPECS: ABOUT OUR PAINT SUPPLIERS: THE ENVIRONMENTAL CHOICE: THE QUAKER DIFFERENCE: WARRANTIES:
SPECS: ABOUT OUR PAINT SUPPLIERS: Our product finishes meet the high specifications required in today s building market. AAMA and 2605 (Powder Coating on Aluminum) specifications. Characteristic ASTM #
More information13 Congresso Internacional de Tintas 13ª Exposição Internacional de Fornecedores para Tintas
HIGH PERFORMANCE ADDITIVES FOR WATER BASED AND LOW VOC PAINTS AND COATINGS Daniel de Moura Massarente, Wolfgang Geuking Croda Coatings and Polymers The replacement of solvent-based coatings by water based
More informationGet the benefits of oil with the ease of latex
One of the most rewarding home improvement projects is putting a fresh coat of paint on your kitchen cabinets. A new color brightens up your kitchen, and can give it a complete updated look. But at the
More informationthe newclay process AN ILLUSTRATED LEAFLET
the newclay process AN ILLUSTRATED LEAFLET small models For chunky little models such as those shown here there will be no need to treat Newclay with the hardener. The clay alone will be quite strong enough.
More informationSketchpaint. Ideal for turning any smooth surface into a whiteboard. Ready to use in 5 days
Sketchpaint Ideal for turning any smooth surface into a whiteboard SketchPaint - A whiteboard straight out of a tin! White Gloss or Transparent Finish Simple application Tin size available: 3m² or 6m²
More informationMasking: Each mirrored sheet is well protected by a durable paint backing and
STORAGE Horizontal storage: If mirror sheets are stored flat, care must be taken to avoid warping, slipping and scratching. If different sizes are stored together the largest panels should at the bottom
More informationR O Z A C H I M ROZAHIM AD. Chemical Company POLYMER EMULSION FOR EVERY CUSTOMER. & Paint guide for every paint
R O Z A C H I M Chemical Company ROZAHIM AD POLYMER EMULSION FOR EVERY CUSTOMER & Paint guide for every paint Rozachim offers a wide range of polymer emulsions. Our vinyl, styrene and pure emulsion are
More informationTechnical Information 50.G.001 Radiation-curing Systems General Information, Services
Technical Information 50.G.001 Radiation-curing Systems General Information, Services NewV UV curing inks and varnishes for offset printing Direction for use NewV offset Direction for use 06/2017 en TABLE
More informationCleaning Procedure INTRODUCTION:
Cleaning Procedure INTRODUCTION: Many elements can contaminate the surface of a vehicle s paint film, such as waxes, grease, polishes, road film, tar and general dirt. Pre-cleaning to remove any existing
More informationHide Glue in the Modern Wood Shop
Hide Glue in the Modern Wood Shop Get ready for some whiplash Last month EMGW meeting on CNC machines covered computer driven high-tech high cost high volume woodworking technology This month EMGW meeting
More informationGetting the Most Out of Airless Spray
P Getting the Most Out of Airless Spray aint application using airless equipment is, and has been for many years, the method of choice for large industrial painting projects. Although the industry is aware
More informationSECTION WOOD AND PLASTIC DOORS. A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION.
SECTION 081416 PART 1 GENERAL 1.01 GENERAL REQUIREMENTS A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION. B. Examine all conditions as they exist at the project prior to submitting
More informationTimberflex & Flexboard Technical Guide
Timberflex & Flexboard Technical Guide A bendable substrate material that can be formed first and laminated last Patent #5,618,601; #5,232,762; #5,824,382 Doors Larger radius and small doors are easily
More informationIndustry looks for new ways to reduce the environmental impact of paints and coatings
Chemical and Engineering News Greening The Paint Market October 16, 2006 Industry looks for new ways to reduce the environmental impact of paints and coatings Marc S. Reisch For years, producers of paint
More informationIDC Innovators: Plastic-Based 3D Printing, 2018
IDC Innovators IDC Innovators: Plastic-Based 3D Printing, 2018 Tim Greene THIS IDC INNOVATORS EXCERPT FEATURES: RIZE IN THIS EXCERPT The content for this excerpt was taken directly from IDC Innovators:
More informationCelebrating one year of more space exclusively at The Home Depot
Cabinets for Kitchen, Bath, Study, Laundry Room and More CABINETS A PRODUCT TRAINING GUIDE Celebrating one year of more space exclusively at The Home Depot The InnerMost Product Difference InnerMost represents
More informationFigure 1: BrazeSkin spraying technique. Page 1
BrazeSkin Pre-brazing techniques for nickel-based and CuproBraze brazing alloys Dr. H. Schmoor, BrazeTec GmbH - Degussa Löttechnik - Hanau 1. Introduction The BrazeSkin technology for applying nickel-based
More informationFrequently asked questions about Alcolin Waterproof Glue
Frequently asked questions about Alcolin Waterproof Glue 1. How can I lengthen the time to assemble my glued furniture? Apply adhesive to both surfaces. Of the polyvinyl acetate type adhesives, Alcolin
More informationKey products guide: External water based preservatives and isolating products
water based preservatives and isolating products Teknol Aqua 1410 A topical preservative meeting Class 3, BS EN 335-1 when used in Teknos factory applied protection system Tested to BS EN 599-1 BPD, NHBC
More information