SSC SERIES. Overview. SSC Surgical Storage Casework. Carr Corporation Established 1946 Version 3/ th Street, Santa Monica, CA, USA
|
|
- Moris Cameron
- 5 years ago
- Views:
Transcription
1 Overview SSC Surgical Storage Casework Designed for the special needs of ORs, labs, clean rooms Recess, surface and pass through versions Base cabinets and wall cabinets Many height, width and depth sizes Glass doors standard, optional stainless doors Optional storage hooks, scope hangers, cath racks, bins, shelf dividers Specially designed for complete cleaning and sterilization Cabinets easily installed without drilling Complete product documentation
2 Table of contents Page Page 3 Page 6 Page Page 2 Page 3 Page 4 Page 5 Page 8 Overview Features Options Recess mount sizes, model numbers Surface mount sizes, model numbers Optional items model numbers Specifications, General notes Detailed submittal drawings Installation, Operation & Maintenance Manual Carr Corporation Established 946 2
3 Features RECESS OR SURFACE MOUNTED capability in one cabinet Recess cabinets become surface mounted with the addition of a base, side panels and top STAINLESS STEEL CONSTRUCTION is strong, highly chemical resistant, inert and has a lifetime finish FAST, EASY, PRECISE INSTALLATION Cabinets easily ganged together with cabinet connectors Mounting holes provided, no drilling Step by step illustrated instructions INTEGRAL RECESS FLANGE instead of an add-on REINFORCED DAMAGE PRONE AREAS All vertical and horizontal corners on face of cabinet are reinforced from behind WELDED CONSTRUCTION for permanent joints Ground and polished FULL HEIGHT STAINLESS PIANO HINGES for a lifetime of service and effortless operation ROUNDED WINDOW CORNERS facilitate thorough cleaning 3
4 Features SMOOTH EASY TO CLEAN INTERIOR to enable enhanced cleaning procedures required in a sterile environment Shelf ladders are built-in and completely flush HEAVY DUTY SHELVES are height adjustable in /2 increments SOLID STAINLESS HANDLES NYLON ROLLER DOOR CATCHES for smooth, quiet operation and long life TEMPERED SAFETY GLASS is double strength, /4 thick REMOVABLE GLASS for easy replacement
5 Features PLANET FRIENDLY Stainless steel is not only a superior clinical material but also an outstanding Green material It is 00% recyclable and is made from 85% recycled material There is no paint and no plastics Carr casework can count toward meeting LEEDS certification goals Request the report Stainless Steel the Green Material available from Carr or the SSINA Institute COMPLETE DOCUMENTATION is available, tailored to the needs of owners, architects, contractors, government authorities: Descriptive data sheets Specifications CAD File drawings Submittal drawings Seismic calculations OSHPD preapprovals Installation, operation & maintenance manuals UNDAMAGED DELIVERY Cabinets shipped in fully enclosed, reusable crates with biodegradable cushioning material around all sides Freight damage is virtually eliminated
6 Options RECESS MOUNTING Basic cabinets are made in a recess configuration The cabinet is mounted into a hole cut into a wall, concealing the bulk of the cabinet See page for model numbers PASS THROUGH MOUNTING The cabinet is mounted in an opening cut through the wall Doors and a recess flange are added to the back of the cabinet Supplies can be passed through the wall to the adjoining room See page for model numbers Recess mounted Pass Through SURFACE MOUNTING The cabinet sits on the floor, against a wall A basic recess cabinet can be easily modified into a surface mount configuration by adding: Sloped or flat top Side panels Base See page 2 for model numbers Surface mounted 6
7 Options SOLID STAINLESS STEEL DOORS are available instead of standard glass doors Solid doors are sound insulated for quiet operation Option SSDR DOOR LOCKS add security and can be quickly changed by replacing core Multiple cabinet orders are keyed alike with the option of keying differently Option LKDR 7
8 Options SHELF DIVIDERS separate and organize supplies Lateral position easily adjusted Add or remove as needed 3, 6 And 9 high versions See page 3 for model numbers PULL OUT SHELF / DESK brings supplies within easy reach Shelf locks in place and can be used as a convenient work surface Shelf glides smoothly on ball bearing drawer slides Shelf can be placed at any height and repositioned in minutes like an ordinary shelf See page 3 for model numbers 8
9 Options CATHETER RACKS have 6 cath hooks and a card holder, all gliding out smoothly for easy access Several racks can be placed at the top of the cabinet or under a shelf Retracted length 6 /2 Option CR6 STORAGE BINS can be placed anywhere and repositioned in minutes Bins slide forward and are removable Fronts are perforated to view contents Unlike baskets, the smooth stainless steel surface can be easily cleaned 0 And 20 wide, 3, 6, 9 heights See page 3 for model numbers 9
10 Options STORAGE TRACKS accommodate storage hook and hanger attachments Tracks are easily removed for cleaning, eliminating large, heavy pegboards Shelves can used in conjunction with tracks See page 3 for model numbers UTILITY HOOKS are 6 long and hold various table accessories A silicone rubber cushion on top prevents damage Held securely in place by quick release lock Option UH6 CATHETER HANGERS are 6 long and hold items with holes in their packaging Held securely in place by quick release lock Option CH6 ENDOSCOPE HANGERS safely and securely hold one scope in a nylon cradle Held securely in place by quick release lock Option EH6 Drip trays see page 3 for model numbers Utility hook Catheter hanger Endoscope hanger 0
11 Recess and pass through cabinet sizes, model numbers Choose a cabinet of desired size and add pass through option if needed SURGICAL STORAGE CABINETS SSC " W, 60 H, 8 D SSC " W, 60 H, 24 D SSC " W, 72 H, 8 D SSC " W, 72 H, 24 D SSC " W, 80 H, 8 D SSC " W, 80 H, 24 D SSC " W, 60 H, 8 D SSC " W, 60 H, 24 D SSC " W, 72 H, 8 D SSC " W, 72 H, 24 D SSC " W, 80 H, 8 D SSC " W, 80 H, 24 D SSC " W, 60 H, 8 D SSC " W, 60 H, 24 D SSC " W, 72 H, 8 D SSC " W, 72 H, 24 D SSC " W, 80 H, 8 D SSC " W, 80 H, 24 D " 36" " 72 60" * 24" 8" PASS THROUGH OPTION PTGD Pass through option, add glass doors to back PTSD Pass through option, add SS doors to back Recess Pass Through * NOTES: 24 Wide cabinets have door Wall mounted cabinets available in 24, 36 and 48 heights 72 High cabinets are special order 60 And 80 high cabinets are standard and ship significantly faster
12 *** ** * Surface cabinet sizes, model numbers SURGICAL STORAGE CABINETS SSC " W, 60 H, 8 D SSC " W, 60 H, 24 D SSC " W, 72 H, 8 D SSC " W, 72 H, 24 D SSC " W, 80 H, 8 D SSC " W, 80 H, 24 D SSC " W, 60 H, 8 D SSC " W, 60 H, 24 D SSC " W, 72 H, 8 D SSC " W, 72 H, 24 D SSC " W, 80 H, 8 D SSC " W, 80 H, 24 D SSC " W, 60 H, 8 D SSC " W, 60 H, 24 D SSC " W, 72 H, 8 D SSC " W, 72 H, 24 D SSC " W, 80 H, 8 D SSC " W, 80 H, 24 D NOTES: 24 Wide cabinets have door Wall mounted cabinets available in 24, 36 and 48 heights Side panels not required between cabinets that are connected Order 60 high cabinets with 2 high bases Order 72 and 80 high cabinets with 3 high bases 72 High cabinets are special order 60 And 80 high cabinets are standard and ship significantly faster Choose a cabinet of desired size and add a top, side panels and base as needed " 36" " 3" 9" 80" 72 60" * 24" 8" SLOPED TOPS ST248 24" W, 8 D ST " W, 24 D ST368 36" W, 8 D ST " W, 24 D ST488 48" W, 8 D ST " W, 24 D FLAT TOPS FT248 24" W, 8 D FT " W, 24 D FT368 36" W, 8 D FT " W, 24 D FT488 48" W, 8 D FT " W, 24 D SIDE PANELS SP H, 8 D SP H, 24 D SP H, 8 D SP H, 24 D SP H, 8 D SP H, 24 D BASES B2438 B24324 B2428 B24224 B3638 B36324 B3628 B36224 B4838 B48324 B4828 B48224 ** *** 24 W, 3 H, 8 D 24 W, 3 H, 24 D 24 W, 2 H, 8 D 24 W, 2 H, 24 D 36 W, 3 H, 8 D 36 W, 3 H, 24 D 36 W, 2 H, 8 D 36 W, 2 H, 24 D 48 W, 3 H, 8 D 48 W, 3 H, 24 D 48 W, 2 H, 8 D 48 W, 2 H, 24 D 2
13 Optional items model numbers SSDR LKDR CC60 CC72 CC80 PTGD PTSD S248 S2424 S368 S3624 S488 S4824 Stainless steel door option Lock, door Cabinet connector, 60 H cabinets Cabinet connector, 72 H cabinets Cabinet connector, 80 H cabinets Pass thru option, add glass doors to back Pass thru option, add SS doors to back Shelf, additional, for 24 W, 8 D cabinet Shelf, additional, for 24 W, 24 D cabinet Shelf, additional, for 36 W, 8 D cabinet Shelf, additional, for 36 W, 24 D cabinet Shelf, additional, for 48 W, 8 D cabinet Shelf, additional, for 48 W, 24 D cabinet SD38 Shelf divider, 3 H, for 8 D cabinet * SD324 Shelf divider, 3 H, for 24 D cabinet * SD68 Shelf divider, 6 H, for 8 D cabinet * SD624 Shelf divider, 6 H, for 24 D cabinet * SD98 Shelf divider, 9 H, for 8 D cabinet * SD924 Shelf divider, 9 H, for 24 D cabinet * SP248 SP2424 SP368 SP3624 SP488 SP4824 Shelf, pull out for 24" W, 8 D cabinet Shelf, pull out for 24" W, 24 D cabinet Shelf, pull out for 36" W, 8 D cabinet Shelf, pull out for 36" W, 24 D cabinet Shelf, pull out for 48" W, 8 D cabinet Shelf, pull out for 48" W, 24 D cabinet SAMH Shelf accessory mounting holes* BIN038 Bin, storage, 0 W, 3 H, for 8 D cabinet * BIN0324 Bin, storage, 0 W, 3 H, for 24 D cabinet * BIN068 Bin, storage, 0 W, 6 H, for 8 D cabinet * BIN0624 Bin, storage, 0 W, 6 H, for 24 D cabinet * BIN098 Bin, storage, 0 W, 9 H, for 8 D cabinet * BIN0924 Bin, storage, 0 W, 9 H, for 24 D cabinet * BIN2038 Bin, storage, 20 W, 3 H, for 8 D cabinet * BIN20324 Bin, storage, 20 W, 3 H, for 24 D cabinet * BIN2068 Bin, storage, 20 W, 6 H, for 8 D cabinet * BIN20624 Bin, storage, 20 W, 6 H, for 24 D cabinet * BIN2098 Bin, storage, 20 W, 9 H, for 8 D cabinet * BIN20924 Bin, storage, 20 W, 9 H, for 24 D cabinet * CR6 Catheter rack, slide out, 6 hooks,6 /2 D * ST2460 ST2472 ST2480 ST3660 ST3672 ST3680 ST4860 ST4872 ST4880 UH6 CH6 EH6 Storage tracks, 6, for 24 W, 60 H cabinet Storage tracks, 6, for 24 W, 72 H cabinet Storage tracks, 6, for 24 W, 80 H cabinet Storage tracks, 8, for 36 W, 60 H cabinet Storage tracks, 8, for 36 W, 72 H cabinet Storage tracks, 8, for 36 W, 80 H cabinet Storage tracks, 0, for 48 W, 60 H cabinet Storage tracks, 0, for 48 W, 72 H cabinet Storage tracks, 0, for 48 W, 80 H cabinet Utility hook, 6 long Catheter hanger, 6 long Endoscope hanger, 6 long DT248 DT2424 DT368 DT3624 DT488 DT4824 GSKTDR FSC60 FSC72 FSC80 FSB3 FSB2 FSFT8 FSFT24 FSST8 FSST24 FTXX Drip tray, endoscope, for 24" W, 8 D cab Drip tray, endoscope, for 24" W, 24 D cab Drip tray, endoscope, for 36" W, 8 D cab Drip tray, endoscope, for 36" W, 24 D cab Drip tray, endoscope, for 48" W, 8 D cab Drip tray, endoscope, for 48" W, 24 D cab Rubber dust gasket, door Filler, side, cabinet, 60 H, to 2 W Filler, side, cabinet, 72 H, to 2 W Filler, side, cabinet, 80 H, to 2 W Filler, side, base, 3 H, to 2 W Filler, side, base, 2 H, to 2 W Filler, side, flat top, 8 D, to 2 W Filler, side, flat top, 24 D, to 2 W Filler, side, slope top, to 2 W, 8 D Filler, side, slope top, to 2 W, 24 D Filler, top, X W, X H * For each shelf you would like to accept accessories such as shelf dividers, bins or cath racks, order the SAMH option that adds holes to attach these accessories 3
14 Specifications CONSTRUCTION: Heavy gauge stainless steel, type 304, heli-arc welded and spot welded modular assembly Reinforced corners Smooth interior for ease of cleaning FINISH: No 4 stainless steel finish Welds ground and polished smooth HARDWARE: Full height piano door hinges, nylon roller door catches, solid stainless steel handles GLASS: /4 Thick tempered double strength safety glass SHELVES: Height adjustable in /2 increments on flush, built-in ladders INSTALLATION: Provided anchorage holes Cabinet connectors between caninets as needed General notes SHELVES: 80 High cabinets come with 5 shelves 72 High cabinets come with 4 shelves 60 High cabinets come with 3 shelves LOCKS: On multiple cabinet orders, locks are normally keyed alike Locks can be keyed differently on request SHIPPING: To prevent freight damage for surface mounted cabinets, cabinet, top, side panels and base are shipped in separate crates and assembled in the field 4
15 SURGICAL STORAGE CABINET RECESS MOUNTED MODEL SSC DATE: /4/ SCALE: NOT TO SCALE DRAWN BY: JJR DRAWING NO 230 A 24" 8" " D 80" 72" 60" B 24" " C 48" 36" DOOR, SOLID SS, DOUBLE WALL, SOUND INSULATED DOOR, SINGLE GLAZED, DOUBLE WALL, 2" WIDE FRAME, SS GLASS, DBL STRENGTH, TEM- PERED, /4" THICK, REMOVABLE STAINLESS, TYPE 304, # 4 FINISH HANDLE, SOLID STAINLESS FLUSH INTERIOR FACILITATING THOROUGH CLEANING PIANO HINGE, FULL HEIGHT, SS NYLON ROLLER DOOR CATCH, SPRING LOADED, NOT SHOWN RECESSING FLANGE SHELF, HEIGHT ADJUSTABLE IN /2" INCREMENTS, SS 80" HIGH CABINET 5 SHELVES 72" HIGH CABINET 4 SHELVES 60" HIGH CABINET 3 SHELVES SHELF QUANTITY NOTE: ONLY ITEMS WITH MARKED BOXES ARE INCLUDED ALL DIMENSIONS ARE +- /8" WALL OPENING: WIDTH: TOTAL OF "B" OR "C"- /2" HEIGHT: "D" - /2" DEPTH: "A" - 3/4" 230
16 SURGICAL STORAGE CABINET PASS THROUGH VERSION MODEL SSC DATE: /4/ SCALE: NOT TO SCALE DRAWN BY: JJR DRAWING NO 290 /8" A 24" 8" B 22 7/8" 6 7/8" " GLASS DOOR SOLID DOOR " E 80" 72" 60" C 24" " D 48" 36" DOOR, SOLID SS, DOUBLE WALL, SOUND INSULATED DOOR, SINGLE GLAZED, DOUBLE WALL, 2" WIDE FRAME, SS GLASS, DBL STRENGTH, TEM- PERED, /4" THICK, REMOVABLE STAINLESS, TYPE 304, # 4 FINISH HANDLE, SOLID STAINLESS STEEL FLUSH INTERIOR FACILITATING THOROUGH CLEANING PIANO HINGE, FULL HEIGHT, SS NYLON ROLLER DOOR CATCH, SPRING LOADED, NOT SHOWN RECESS FLANGE, SS, BUILT IN RECESS FLANGE, SS,REMOVABLE SHELF, HEIGHT ADJUSTABLE IN /2" INCREMENTS, SS 80" HIGH CABINET 5 SHELVES 72" HIGH CABINET 4 SHELVES 60" HIGH CABINET 3 SHELVES SHELF QUANTITY NOTE: ONLY ITEMS WITH MARKED BOXES ARE INCLUDED ALL DIMENSIONS ARE +- /8" WALL OPENING: WIDTH: TOTAL OF "C" OR "D"- /2" HEIGHT: "E" LESS /2" WALL DEPTH: "B" 290
17 SURGICAL STORAGE CABINET SURFACE MOUNTED MODEL SSC DATE: /4/ SCALE: NOT TO SCALE DRAWN BY: JJR DRAWING NO 23 9" D 80" 72" 60" E 2" 3" A 24" 8" 3" B 24" C 48" 36" SLOPED TOP, SS FLAT TOP, SS SIDE PANEL, SS QTY BASE, SS DOOR, SOLID SS, DOUBLE WALL, SOUND INSULATED DOOR, SINGLE GLAZED, DOUBLE WALL, 2" WIDE FRAME, SS GLASS, DBL STRENGTH, TEM- PERED, /4" THICK, REMOVABLE STAINLESS, TYPE 304, #4 FINISH HANDLE, SOLID STAINLESS FLUSH INTERIOR FACILITATING THOROUGH CLEANING PIANO HINGE, FULL HEIGHT,SS NYLON ROLLER DOOR CATCH, SPRING LOADED, NOT SHOWN SHELF, HEIGHT ADJUSTABLE IN /2" INCREMENTS, SS 80" HIGH CABINET 5 SHELVES 72" HIGH CABINET 4 SHELVES 60" HIGH CABINET 3 SHELVES SHELF QUANTITY NOTE: ONLY ITEMS WITH MARKED BOXES ARE INCLUDED ALL DIMENSIONS ARE +- /8" 23
18 Carr Surgical Consoles - Installation, Operation And Maintenance Page Installation Preparation Page 2 Recess Mounted Cabinet Installation Page 3 Surface Mounted Cabinet Installation Page 4 Pass Through Cabinet Installation Page 5 Operation And Maintenance Manual Number 338, Revised /0 338
19 Carr Surgical Consoles - Installation Preparation Manual No 338 Revised /0 Remove drawers to access mounting holes If cabinets have drawers, remove them to access mounting holes Toggle latches as shown to release To insure correct allignment, drawers should be replaced to their original position by matching the numbers on the inside of the cabinet body to the numbers on the side of the drawers Side view Mounting holes Drawer No 4 Make electrical connections: Electrical connection on top Electrical connections on top Some cabinets require electrical connections Connect and ground electrical wires in conformance to local codes using a qualified electrician prior to placing cabinet in the wall Final connections can be made after installation by opening the electrical access panels as shown Electrical access panel Lighting fixture Remove diffuser Remove raceways to connect outlets / ports as required Remove screws to attach monitor if required Electrical access panel DCD-24 Front view NCC-36,48 Front view Page 338
20 Carr Surgical Consoles - Recess Mounted Cabinet Installation Manual No 338 Revised /0 Cut wall opening, place cabinet and secure: Front Side view Installer provided wall mounting screws Provided /4" dia mounting holes Back Studs For multiple cabinet installation: Front view (drywall removed for clarity) Top view Use between cabinet connector (BCC-0) General notes: Check local codes before installation Seismic calculations available on request /4" Dia mounting holes provided in cabinet Wall mounting screws not supplied Use screws suitable for wall material All other required screws and nuts provided Wall opening width is the front width of the cabinet(s), less /2" Wall opening height is cabinet front height less /2" Wall opening depth is cabinet side less 3/4" Cut wall opening Frame with stud material, making sure cabinet mounting holes allign with studs as shown Check opening is square Attach between cabinet connector to one cabinet if multiple cabinet installation Slide cabinets into wall Do not lift cabinet by door handles or front recess flange as this may cause damage Install mounting screws into provided holes Do not over torque mounting screws as this may cause damage Hand torque only Install remaining screws for cabinet connectors, if any Check cabinet is installed square in the wall to insure proper door movement Shim as required Page 2 338
21 Carr Surgical Consoles - Surface Mounted Cabinet Installation Manual No 338 Revised /0 Secure base: 2 Secure end covers as required: Base Place end cover with spacers on side of cabinet and loosely attach inside screws Loosen outside screws and perfect allignment, eliminating any gaps Tighten screws End covers not req'd between cabinets Notches go in back Spacers 3 Secure top Secure cab to wall: For multiple cabinet installation: Spacers Flat or sloping top Top view Use between cabinet connector (BCC-0) Installer provided wall mounting screws General notes: Check local codes before begining installation Seismic calculations available on request /4" Dia mounting holes are provided Wall mounting screws not supplied, use screws suitable for wall material All other required screws and nuts provided Do not lift cabinet by door handles or front flange as this may cause damage Be sure cabinet is installed square to insure proper door movement Do not over torque mounting screws as this may damage the cabinet Hand torque only Page 3 338
22 Carr Surgical Consoles - Pass Through Cabinet Installation Manual No 338 Revised /0 Cut wall opening and place cabinet: General notes: Front Front Side view Provided /4" dia mounting holes Back Secure cabinet to wall with installer supplied screws Back Back view (drywall removed for clarity) Studs 2 Secure cabinet to wall, attach flanges: IMPORTANT! Do not open doors or remove corner braces untill cabinet is in wall! Screw flanges onto back Check local codes before installation Seismic calculations available on request /4" Dia mounting holes provided in cabinet Wall mounting screws not supplied Use screws suitable for wall material All other required screws and nuts provided Wall opening width is the front width of the cabinet(s), less /2" Wall opening height is cabinet front height less /2" Wall opening depth is cabinet side less 3/4" Cut wall opening Frame with stud material, making sure cabinet mounting holes allign with studs as shown Check opening is square Attach between cabinet connector to one cabinet if multiple cabinet installation Slide cabinets into wall Do not lift cabinet by door handles or front recess flange as this may cause damage Install mounting screws into provided holes Do not over torque mounting screws as this may cause damage Hand torque only Install remaining screws for cabinet connectors, if any Check cabinet is installed square in the wall to insure proper door movement Shim as required Side view Back view (dywall removed for clarity) Page 4 338
23 Carr Surgical Consoles - Operation And Maintenance Manual No 338 Revised /0 Placing / removing hooks on STA cabinets: Insert hook into slots and slide down Ladder on back of cabinet Slots in ladder Hook Lever in unlocked position With hook in place, turn lever to locked position Side view To remove, reverse process Replacing light bulbs: Cleaning: Lighting fixture Remove diffuser Remove and replace light bulbs using no more 40 watt bulbs Clean unit with mild detergent, rubbing with the grain, NOT in a circular motion as this will damage the finish Leave a light coat of mineral oil on the surface DCD-24 Front view NCC-36,48 Front view Page 5 338
SCI-FAB Product Specifications. Casework Section 1. Part 1 General
SCI-FAB Product Specifications Casework Section 1 Part 1 General 1.1 SCOPE OF WORK Includes all factory fabricated stainless steel casework as required by the project drawings. 1.2 TYPICAL INCLUSIONS A.
More informationSolutions AGRICULTURAL LABORATORY & CLASSROOM FURNITURE. Education to Industry. Solutions for Your Workspace & Storage Needs
AGRICULTURAL LABORATORY & CLASSROOM FURNITURE Education to Industry for Your Workspace & Storage Needs www.ageducationalsolutions.com 864-256-0621 info@ageducationalsolutions.com Workbenches Potting Benches
More informationSystem 3000 specifications
System 3000 specifications Scope: Materials: Type of Bookstack: This specification covers delivery and installation of steel library shelving of the bracket type. Height, depth and accessories shall be
More informationOpus Cabinets with "H Storage Unit, continued
66 Health Volume 2 Casegoods Specification Guide Fascia is used to extend cabinets to the ceiling Fascia can only be used on 84"H cabinets Fascia accommodates ceiling heights of 7'6" 9'6" in 1 16" increments
More informationSteel Solutions USA 602 E. Walnut Street Watseka, IL p: (888) f: (815)
Steel Solutions USA 602 E. Walnut Street Watseka, IL 60970 p: (888) 875-5004 f: (815) 432-3364 sales@steelsolutionsusa.com Published February 2011 2011 Steel Solutions USA. All rights reserved. version
More informationInstallation Instructions - Model V4JSD 1
Installation Instructions - Model V4JSD 1 Support Assemblies: Parts list: (Note see enclosed cut sheet for quantities and dimensional information) A vertical structural member (1 ½ x 1 ½ modular frame)
More informationContents. E-Line Series (Wood Casework) K-Line Series (Wood Casework) D-Line Series (Wood Casework)
WOOD CABINET LINES Contents E-Line Series (Wood Casework)... 2-3 K-Line Series (Wood Casework)... 4-5 D-Line Series (Wood Casework)... 6-7 L-Line Series (Wood Casework)... 8-9 M-Line Series (MDF Casework)...
More informationAssembly and Installation Guide
The Easy Hang Closet Solution SM Install Your elfa In An Instant. Enjoy The Benefits For A Lifetime. Basic Tools For elfa Assembly and Installation Level Hand or Power Drill Drill Bits 1/8", 3/8", 5/16"
More informationStaples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Item # Size Finish Material Case Qty.
Edge Protector Staples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Size Finish Material Case PX91000N* 1-[½]"L x [⅝]" x [ 9 / 16]" Natural Plastic
More informationSECTION 12345.1 - MODULAR STEEL LABORATORY CASEWORK 1 PART 1 PRODUCTS 1.01 MANUFACTURER A. Casework and equipment manufacturer: ALIR Systems, Inc., 245 Harrison St, Jamestown, New York, 14701. 1.02 CASEWORK
More informationTIP FOR GETTING STARTED
Tip for getting started TIP FOR GETTING STARTED Be careful not to drill into any electrical wires, ductwork, plumbing or other damagable components. If you have any questions on the locations of these
More informationHEAVY DUTY 11 STEEL CABINET
HEAVY DUTY STEEL CABINET ASSEMBLY INSTRUCTIONS ONE DRAWER BASE CABINET 05-206 Parts List Part No Description Qty Image ONE DRAWER BASE CABINET Part No Description Qty Image SB- Cabinet Body EH-0 Euro Hinge
More information.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1.
PAGE 1 PART 1 GENERAL 1.1 REFERENCE.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1. 1.2 RELATED WORK SPECIFIED ELSEWHERE.1 Installation
More informationMOVENTO. The Evolution of Motion
The Evolution of Motion is the latest advancement in concealed runner technology. It brings together all of the features, innovations and benefits that Blum has developed since first manufacturing drawer
More informationInstallation Instructions
by Plato Woodwork Installation Instructions Plato Woodwork, Inc. 200 Third Street SW P.O. Box 98 Plato, MN 55370 www.platowoodwork.com 800.328.5924 SECTION GUIDE GETTING STARTED PAGE # Installation Methods...
More informationCopyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax
Copyright 2003. Black Box Corporation. All rights reserved. 1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746 JULY 2003 RM3010A RM315-R2 RM323-R2 RM329 RM451 RM457 RM3020A RM316 RM324-R2
More informationPORTA~TRACE. GAGNE, INC. 41 Commercial Dr. Johnson City, New York Phone: Fax: ASSEMBLY INSTRUCTIONS
PORTA~TRACE GAGNE, INC. 41 Commercial Dr. Johnson City, New York 13790 Phone: 1-607-729-3366 Fax: 1-607-729-7644 ASSEMBLY INSTRUCTIONS PORTA~TRACE MODEL 2436T LIGHT TABLE PORTA~TRACE MODEL 3648T LIGHT
More informationCloset Carousel Installation Instructions. Models TKA 5 Through TKA 14 Equipped with Footswitch Controls
Tools Required: Phillips Screwdriver (#2) Adjustable Wrench Level Tape Measure Utility Knife Electric Drill Drill Bits for Anchors Ladder (4 foot) Models TKA 5 Through TKA 14 Equipped with Footswitch Controls
More information#916 CLASSIC 16 GUN CABINET ASSEMBLY INSTRUCTIONS
Thank you for purchasing this quality product. A list of PARTS and INSTRUCTIONS is included to assist you. Unpack and identify all parts included on the Parts List and Hardware List. If parts are missing,
More informationMounting Brackets for 8450 Drawer Slides KV Front Bracket 20 $1.30 KV P Rear Bracket 20 $5.20
Mounts bottom or side 1/2 clearance plus 1/32 0 lb. load with model Almond finish Integrated soft-close mechanism 32mm hole pattern with direct access mounting Lever disconnect for easy drawer removal
More informationCloset System Installation Manual
Closet System Manual Thank you For choosing our Custom Closet Collection to fit all your needs Closets come fully assembled to make your project an enjoyable and satisfying experience. With quality Custom
More informationSTANDARD 430E Series. Bottom mounted full extension drawer runners 430E E E E E E E E E4000
STANDARD 430E Series Bottom mounted full extension drawer runners Specifications Runner 430E8000 430E7500 430E7000 430E6500 430E6000 430E5500 430E5000 430E4500 430E4000 430E3500 430E3000 430E2500 Nominal
More informationMedia Storage Systems Fixed Media Cabinets
Owner s Manual Media Storage Systems Fixed Media Cabinets Contents 1-Column Fixed Media Storage Cabinet Important User Information...........................2 Safety Precautions.................................3
More informationOxford Stalls Installation Instructions
Oxford Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 8/15/17 Before You Start Typical stall sizes are 10 x 10, 12 x 12 or
More informationMaintenance and other important non-personal injury and non-material damage instructions or statements that should be observed.
VIGO INDUSTRIES INSTALLATION GUIDE FOR SHOWER ENCLOSURE ()! SAFETY PRECAUTIONS This Installation Guide uses the following symbols to indicate important information. Always observe the instructions indicated
More informationSTANDARD. Drawer runner program. Perfecting motion.
STANDARD Drawer runner program Perfecting motion STANDARD drawer runners Table of Contents Blum STANDARD drawer runners apply proven technology built upon years of experience to ensure a solid performance
More informationMANAGED CARE QUICK CABINETS
Clinton Managed Quick Care Cabinets are the quickest and most economical way to get quality cabinets for office, clinic or exam rooms. Clinton cabinets ship in pre-assembled units and are easy to install.
More informationAIR MASTER SYSTEMS INSTALLATION GUIDE TABLE OF CONTENTS
AIR MASTER SYSTEMS INSTALLATION GUIDE TABLE OF CONTENTS GENERAL INFORMATION...1 Freight Damage... 1 Repairing Paint Scratches...1 BASE CABINETS... 2 Drawer Removal and Reinstallation...2 Replacing Drawer
More informationINSTALL INSTRUCTIONS WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES NEWAGE STEEL WELDED CABINETRY
NEWAGE STEEL WELDED CABINETRY WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES ALL CABINETS MUST BE MOUNTED TO STUDS ON A SECURE WALL, AS PER THESE INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS
More informationPortofino Installation Guide
vjul16 (for 17 or 24 mm Surface Wall Profiles) DO NOT ASSEMBLE WITHOUT FULLY READING THESE INSTRUCTIONS Page 2 Thank you for purchasing this Portofino shower enclosure. Please study these instructions
More informationDENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION METAL LOCKERS
PART 0 A/E INSTRUCTIONS 0.01 GENERAL DESIGN REQUIREMENTS A. Architect shall coordinate with the DPS Project Manager the type, layout and size of lockers required on the project. B. Varsity athletic Lockers
More informationPortofino Case2 Installation Guide
Portofino Case2 Installation Guide vjun16 (for 17 or 24 mm Surface Wall Profile) DO NOT ASSEMBLE WITHOUT FULLY READING THESE INSTRUCTIONS Page 2 Thank you for purchasing this Portofino Case 2 shower enclosure.
More informationINSTALLATION GUIDE FOR METAL LABORATORY CASEWORK
LABORATORY Casework & Cabinets INSTALLATION GUIDE FOR METAL LABORATORY CASEWORK RDM Industrial Products, Inc. RDM LAB CABINET INSTALLATION GUIDE TABLE OF CONTENTS GENERAL INFORMATION...1 Freight Damage...1
More informationDeauville Installation Guide
vjul16 (for 17 or 24 mm Surface Wall Profiles) DO NOT ASSEMBLE WITHOUT FULLY READING THESE INSTRUCTIONS Page 2 Thank you for purchasing this Deauville shower enclosure. Please study these instructions
More informationSINGLE TRACK BYPASS (patent pending) barn door hardware
SINGLE TRACK BYPASS (patent pending) barn door hardware Installation Manual What is included in your kit: Part number Part name Quantity 1 Inner door hanger 2 2 Outer door hanger 2 3 5/16 x 1.5 lag bolts
More informationLOCKER SPECIFIERS GUIDE. The standard of excellence for business, industry and institutions. Lockers Cabinets Shelving
LOCKER SPECIFIERS GUIDE Lockers Cabinets Shelving The standard of excellence for business, industry and institutions FINISH GUIDE NANO METAL ROLLER LATCHING SYSTEM For unmatched security, nano metal roller
More informationArlink 8000 Workstation
Arlink 8000 Workstation Instructions for Assembly Introduction Basic Frame Assembly Worksurface Assembly Drawer and Power Beam Assembly Light Fixture and Shelves Worksurface Grounding Instructions Wrist
More informationYes 20 Charging Wall Cabinet for Tablets
Built with Anthro-DNA Owner's Manual for Yes 20 Charging Wall Cabinet for Tablets Part # YESCABGMPW Components at a Glance 1 2 4 5 8 7 10 3 6 9 Front of Cabinet (closed) 1. Locking front door to User area.
More informationDeauville Installation Guide
vjul16 (for Recessed Wall Profiles) DO NOT ASSEMBLE WITHOUT FULLY READING THESE INSTRUCTIONS Page 2 Thank you for purchasing this Deauville shower enclosure. Please study these instructions carefully before
More informationRequired Tools: Suggested Additional Tools: 1 Cordless Drill with Robertson Bits 1 Ratchet Wrench 1 7/16 or 11mm socket 1 7/16 or 11mm Gear Wrench
Thank you for your recent purchase of a Cabinets by Hayley garage cabinet system. You are about to experience the best made cabinets that you can purchase. Cabinets by Hayley are designed for beauty and
More informationSpecialty Detention Products
Institutional Furniture ViewAll Wire Mesh/ Screening Safe-T-Feed Leading Innovator of Security Products for Over 80 Years Specialty Detention Products Trussbilt manufactures a variety of specialty detention
More informationVanity Installation Instructions
Vanity Installation Instructions Segments of these instructions will relate to your vanity. Please read these instructions thoroughly and ensure the appropriate instructions are used during the installation
More informationBefore Assembling the Storage Wall
Chapter 1 Assembling the Lista Storage Wall Lista provides two types of standard Storage Walls: B251 and B255. The design, construction, assembly, and quality are identical for both types, however, B251
More informationTANDEM plus BLUMOTION
TANDEM plus BLUMOTION Premium Concealed Runners for Wood Drawers TANDEM plus BLUMOTION TANDEM plus BLUMOTION brings together all of the features, innovations and benefits that Blum has developed since
More informationProduct Guide Specification
Shield Casework February 2014 3421 Merriam Lane Overland Park, Kansas 66203 Phone 913-744-2183 Fax 913-384-3477 Website www.shieldcasework.com E-mail info@shieldcasework.com Product Guide Specification
More informationSTANDARD. Drawer runner program. Perfecting motion. blum.com
STANDARD Drawer runner program blum.com Perfecting motion Proven technology - built upon years of experience Blum testing criteria Cycle life/dynamic load capacity test Side pressure test 100,000 open/close
More information1. Show the following information with additional information necessary to indicate shop compliance with the requirements of this section.
SECTION 12360 LIBRARY SHELVING PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 06100 - Carpentry. 2. 09200 - Metal Studs, Lath, Suspension Ceiling, Plaster and Stucco. 3. 09660 - Resilient Tile Flooring.
More informationFIXED PANEL SLIDER QCI5241
INSTALLATION INSTRUCTIONS FIXED PANEL SLIDER QCI5241 FRAMELESS PANEL / DOOR / PANEL FRAMELESS DOOR / PANEL QCI5241 REV. 0 Page 1 Certified 06/16/2016 Parts List *Quantities may vary QCI5241 REV. 0 Page
More informationDisplay/Accessory Furniture
1 Multimedia Display End-of-Range, 60-013-S00 End-of-range displayer has five 59 1 /2" 19 3 /8" 16" 163 Sloped Shelving Book Displayer sloping shelf spaces for displaying books spine out at an angle for
More informationOXYGEN INSTALLATION. Revision date
12345 1 Hardware List 12345 Flat head wood screw #9 x 7/8 long with #2 Phillips drive, silver Used to attach surfaces and end panels Hex set screw ½-13 x 2 long with 1/4 hex drive, black Used on Legs Hex
More informationMighty Mo GX Series Cabinet Installation Guide. OR Rev /11
Mighty Mo GX Series Cabinet Installation Guide OR-71601787 Safety and Warning ATTENTION The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating
More informationOwner s Manual. Tote-Al Case Carts, Double-door Models
Owner s Manual Tote-Al Case Carts, Double-door Models (without center posts) Durable, heli-arc welded, stainless steel Wide selection of shelf and drawer options Pick from four cabinet lengths and two
More informationSymphony II Adaptable Table System
Symphony II Adaptable Table System 1.00 General 1.01 Conditions 1.02 Scope of work 1. This section covers all materials, equipment, tools and labor for the supply and installation of the laboratory Symphony
More informationRevised
Indentify Non-powered panels and separate from Powered panels. Non-powered panel shown at left.. Powered panel shown at left has powerway mounted at factory. Also separate panels by surface type, width
More informationInstallation Manual for Metal Toilet Partitions Standard Series
For Video instructions http://www.hadrian-inc.com/tech-data/installation/toilet-partitions.aspx P a g e 1 Table of Contents Page General Notes and Tools Required 3 STEP 1: Establish Floor Bracket Locations
More informationASS 70 FD folding / sliding door. Installation Guide
ASS 70 FD folding / sliding door Installation Guide IMPORTANT! These doors should be fitted by competent and trained installers. Please read these instructions thoroughly before beginning the installation.
More informationINSTALLATION INSTRUCTIONS FOR STANDING SHOWER CABIN OWNER'S MANUAL PLEASE READ INSTRUCTIONS BEFORE PROCEEDING Packing List. Door (pc) 2. Hinge (2pc) 3
VIGO INDUSTRIES INSTALLATION GUIDE FOR SHOWER ENCLOSURE ()! SAFETY PRECAUTIONS This Installation Guide uses the following symbols to indicate important information. Always observe the instructions indicated
More informationMUTO COMFORT XL 150 L 80
MUTO COMFORT XL 150 L 80 Installation instructions - Ceiling mount [less DORMOTION] ( door) TABLE OF CONTENTS Overview Intended use Ceiling requirements and fittings Requirements for glass panel Safety
More informationStorage Cabinets SYSTEMS FOR SUCCESS
Storage Cabinets Storage Cabinets Are Not All Created Equally If you thought storage cabinets were all the same, think again. Tennsco storage cabinets offer a real difference. Whether your application
More informationC. Samples for Initial Selection: Manufacturer's color charts showing the full range of colors available.
SECTION 105113 - METAL LOCKERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationtable of contents Sliding Door Accessories Page Latches & Snuggers Stay Rollers Brackets & Stops
table of contents Square Track & Accessories Pages 4-7 Square Track Options Page 4 Light Duty Track Page 4 Square Track Brackets Page 5 Square Track Accessories Page 5 Square Track Trolleys Page 6-7 Offset
More informationStorage Cabinets 9000 Series Assembly Instructions
Storage Cabinets 9000 Series Assembly Instructions Thank you for selecting Salsbury s storage cabinets. We are confident that the quality and construction of the cabinets will prove to be a good investment.
More informationINSTALLATION TORSION SPRING FRONT OR REAR MOUNT LOW HEADROOM. 1 Cutting Vertical Track. 2 Fully Adjustable Jamb Brackets
TORSION SPRING FRONT OR REAR MOUNT LOW HEADROOM Wayne Dalton, a division of Overhead Door Corporation P.O. Box 67, Mt. Hope, OH., 44660 Supplemental insert Copyright 2015 Wayne Dalton, a division of Part
More informationLaminate Cabinet Installation Instructions
Laminate Cabinet Installation Instructions www.easygaragestorage.com/installation How To Use These Instructions Thank you for your purchase! Please read each step of this manual thoroughly to ensure proper
More information19-in. Mini-Rack Cabinet, Type 1
Spec-00466 19-in. DP FX (763) Mini-Rack 422-2588 422-2661 Cabinet, Components and Accessories Free-Stand Networking Cabinets 19-in. Mini-Rack Cabinet, Type 1 Industry Standards NEMA Type 1 EIA 310-D /
More informationMirage Installation Manual
Mirage Installation Manual General Information This installation manual provides necessary information for the safe installation of the Mirage product. WARNING: Failure to follow the instructions in this
More informationWPS crew Doors Installation instructions
WPS-132-133 crew Doors Installation instructions ORDER OF INSTALLATION FOR A COMPLETE ENCLOSURE OF A CREW WPS (Weather Protection System) IS AS FOLLOWS: 1. Heater 2. Rear Thresholds - Right Hand & Left
More information10-PIECE. Garage Storage Set OWNER'S MANUAL. Patent pending
10-PIECE Garage Storage Set OWNER'S MANUAL Patent pending IMPORTANT When you open the cartons, carefully check the units and make sure there IS NO damage. If you have any problems with the units or with
More informationINSTALLATION GUIDE 2009-CURRENT HUMMER H3T PRODUCT CODE:
INSTALLATION GUIDE 2009-CURRENT HUMMER H3T PRODUCT CODE: 268 June 22, 2010 TOOLS NEEDED COMPONENTS INCLUDED P2 Tip 3/8" Drill Rubber Gasket(s) x 2 Bracket(s) x 2 1/2" Drill Bit Bulkhead Flange #2 Phillips
More information6000 Series Modular Cabinetry
6004 6000 Series Modular Cabinetry Four Drawer, 24 (61cm) Base Cabinet High pressure laminate countertop with 4 (10.2cm) backsplash Full extension roller bearing drawer glides Interchangeable drawer fronts
More informationWORKSHOP FURNITURE. Rugged, Heavy Duty, Quality Steel Construction. Optional drawer. Lower shelf same length as worktop
Designed For Todays Technical Workspace Environment Rugged, Heavy Duty, Quality Steel Construction Bench tops are 29" deep, not 24" as with most common benches Superb powder coat finish Modern design Optional
More informationStandard Product. Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories
Spec-00466 F763.422.2661 763.422.2588 Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories Free-Stand Cabinets 19-in. Mini-Rack Cabinet, Components and Accessories 19-in. Mini-Rack
More informationMobile Weapons Storage System Specifications
Mobile Weapons Storage System Specifications Whatever your weapon storage needs, Hi-Density s customized Weapons Storage System will be designed to fit your unique specifications. We recognize that security
More informationMuto Premium Recessed Mount. XL150/80/120 Fixed Panel ONLY - Ceiling mount. Installation instructions
Muto Premium Recessed Mount XL150/80/120 Fixed Panel ONLY - Ceiling mount Installation instructions 936036 05-2018 EN Table of Contents Table of contents 1 Technical specifications 3 1.1 Overview 3 1.1.1
More informationAuxiliary Hardware Brass Padlocks
Brass Padlocks Gainsborough offer a selection of quality 45mm and 50mm brass padlocks, featuring brass and steel materials and 6 pin cylinder security. The range includes hardened steel or brass shackles
More informationChapter 22 - Cabinets & Vanities
Chapter 22 - Cabinets & Vanities Contents Chapter 22 - Cabinets & Vanities... 22-1 Timing & Prerequisites... 22-2 Cabinets... 22-3 Cabinet Layout... 22-3 Wall Cabinets... 22-4 Assemble the Wall Units...
More informationINSTALLATION INSTRUCTIONS GT1006E TALL CABINET, RESIN WALL MOUNT
INSTALLATION INSTRUCTIONS GT1006E TALL CABINET, RESIN WALL MOUNT CARTON CONTENTS PART 1 - CABINET ASSEMBLY QUANTITY DESCRIPTION CARTON #1 1 CABINET COMPONENTS PART 2 - WALL MOUNTING QUANTITY DESCRIPTION
More informationINSTALLATION INSTRUCTIONS FRAMELESS CONTINUOUS HINGE SHOWER ENCLOSURE QCI5233
INSTALLATION INSTRUCTIONS FRAMELESS CONTINUOUS HINGE SHOWER ENCLOSURE QCI5233 QCI5233 Rev 0 Page 1 Certified 06/20/2016 INSTALLATION NOTES: Unpack your unit carefully and inspect for freight damage. Lay
More informationRH-412 STEEL DOORS INSTALLATION INSTRUCTIONS
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.
More informationLOW-PROFILE WALLMOUNT CABINETS
USER MANUAL RMT35X SERIES LOW-PROFILE WALLMOUNT CABINETS 24/7 AT OR VISIT BLACKBOX.COM TABLE OF CONTENTS SAFETY INFORMATION... 3 Receiving, Unpacking, and Removing the Low-Profile Wallmount Cabinet from
More informationTENANT IMPROVEMENT 16 FEBRUARY WEST 27TH STREET, 4TH FLOOR 100% CD OWNER/BID ADD 1-03/08/2018
SECTION 055000 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationtile redi redi DOOR Redi Redi Swing Slide g TM TM...Opening Doors to Stunning Showers! TM TM SERIES: CONFIGURATION: MOUNTING PACKAGE:
redi DOOR INSTALLATION INSTRUCTIONS tile redi Redi Redi Swing Slide g TM TM...Opening Doors to Stunning Showers! TM TM SERIES: CONFIGURATION: MOUNTING PACKAGE: 1100 Door-Door Framed sliding doors RDQCI5023
More informationTIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together
More informationExponents Bench Cushion
Exponents Bench Cushion Power Drill #2 Phillips Bit Bit Holder Page 1 of 2 939500640 Rev A 1. Place cushion on top of the bench, so the black Coalesse tag is in the right rear corner of the bench. 2. From
More informationFlexFrame - Storage Components and Skins
FlexFrame - Storage Components and Skins 1/4 Square Drive Ball-Point Hex-Bit Socket 1/8 Short Hex, 1-1/2 Overall Length McMaster Part # 54075A44 Table of Contents Topic Page Storage Components 2 General
More informationINSTALLATION INSTRUCTIONS FOR PLASCORE F5075 FRAME WALL
INSTALLATION INSTRUCTIONS FOR PLASCORE F5075 FRAME WALL The following information is provided by Plascore, Inc., as a general guideline for the installation of the F5075 Frame Wall System. This information
More informationMusic Area Casework General 1.01 Summary Related Sections Definitions Qualifications and Quality Assurance
1.00 General 1.01 Summary Music Area Casework A. This section includes the following Scope of Work as referred to in the plans: 1. Thermally Fused Laminate manufactured casework, for use in music areas,
More informationINSTALLATION INSTRUCTIONS RH 412 STEEL DOORS
By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side. Note: Having the hood open makes the job
More informationInstallation Manual Flat Track Series
Manual Flat Track Series Contents Safety...1 Parts...2 Hardware.......................................... 2 Tools Required..................................... 4.............................................
More information1. TOOLS + MATERIALS REQUIRED
R INSTALLATION INSTRUCTIONS PRODUCT: BALDUR + ODEN CONFIGURATION: BI-PARTING DOOR MOUNT: TOP MOUNT Product is covered by U.S. patents. For more information visit www.krownlab.com. TOOLS + MATERIALS REQUIRED
More informationPreference Collection and Treatment Console INSTALLATION GUIDE
Preference Collection 5580.69 and 5580.96 Treatment Console INSTALLATION GUIDE WARNING Failure to install the 5580 as described in this installation guide may cause the unit to collapse, resulting in serious
More informationYES 12 Charging Wall Cabinet for Mini-laptops
Built with Anthro-DNA Owner's Manual for YES 12 Charging Wall Cabinet for Mini-laptops Part # YESMLCGMPW Components at a Glance 7 1 9 8 2 4 5 11 6 10 3 Front of Cabinet (closed) 1. Locking front door to
More informationSTOP. Performance Plus 2.0 Series. hazard! ATTENTION: Is your cabinet damaged?
Performance Plus. Series Warning: Excessive Warning: Excessive weight hazard! weight hazard! Use two or more people to move, assemble, or install cabinets and locker to avoid back injury. Do not leave
More informationLinear Hook- on Worksurfaces
Linear Hook- on Worksurfaces Linear Hook-On Worksurfaces come in three depths and seven lengths. Different worksurfaces have different reqirements for installation that are outlined below. 27 inch deep
More informationPreference Collection 5580 Treatment Console INSTALLATION GUIDE
Preference Collection 5580 Treatment Console INSTALLATION GUIDE 0 WARNING Failure to install the 5580 as described in this installation guide may cause the unit to collapse, resulting in serious injury
More informationASS 70 FD folding/sliding door installation guide
ASS 70 FD folding/sliding door installation guide 2 Preparation IMPORTANT These doors should be fitted by competent and trained installers. Please read these instructions thoroughly before beginning the
More informationCopyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax
Copyright 2004. Black Box Corporation. All rights reserved. 1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746 JANUARY 2004 RF500A RF507A RF514A RF521A RF501A RF508A RF515A RF522A RF502A
More informationPRE-ENGINEERED HORSE STALL SYSTEMS SDFD SLIDING DOOR c/w FOLD-DOWN GRILL. & Assembly. Installation Instructions
PRE-ENGINEERED HORSE STALL SYSTEMS 4800 SDFD SLIDING DOOR c/w FOLD-DOWN GRILL & Assembly Installation Instructions 4800 SDFD Sliding Door c/w Fold-Down Grill Components - 1 3 /4" x 2" x 88" channels (2)
More informationCopyright 2017 AIA MasterSpec Premium 05/17 PRODUCT MASTERSPEC LICENSED BY ARCOM TO WEREVER PRODUCTS, INC.
This Product MasterSpec Section is licensed by ARCOM to Werever Products, Inc. ("Licensee"). This proprietary Product MasterSpec Section uses modified original MasterSpec text. Revisions made to the original
More informationFURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS
www.hafeleindia.com FURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS ABOUT ITALIANA FERRAMENTA ITALIANA FERRAMENTA is specialized in the production of high quality accessories and ironmongery
More information