EASIER MAKING HARD WORK. Since 1948, SENCO has been synonymous with professional results, quality, increased productivity and craftsmanship.

Transcription

1

2 MAKING HARD WORK EASIER Since 948, SENCO has been synonymous with professional results, quality, increased productivity and craftsmanship. Customers around the world have put SENCO s innovative products to work in a variety of demanding applications, counting on them to perform everyday. Today, SENCO continues to pioneer new technologies in all areas of professional fastening solutions. At SENCO, our mission is to be the undisputed provider of choice for quality fastening solutions that increase productivity and make work safer and easier to perform. We promise to be a true partner for fastening solutions; focused on the needs of our customers and users by providing expertise and innovations that make hard work easier. We design and engineer every SENCO fastening system to deliver outstanding results and maximize productivity. We have a focus on safety because we want everyone who uses our product to have a long and injury free career. We value input from our users and focus on responsive innovations that make fastening simpler and more efficient. At SENCO, we are dedicated to bringing you only the best in professional fastening systems. 420 Ivy Pointe Blvd. Cincinnati, OH

3 THE CORDLESS TOOL FOR ANY PROFESSIONAL CORDLESS FINISH & TRIM WITH FUSION TECHNOLOGY NOTHING ELSE COMPARES Requires no hose, no compressor, and no costly fuel cells. Scan to learn about FUSION Tools Drives like a traditional pneumatic nailer, with the convenience of cordless. Provides an instant shot when trigger is pulled. The Cordless Tool for any professional Requiring no fuel cell, compressor or hose. Our Li-ion battery powered finish and brad nailers featuring Fusion Technology are available in, 6, and 8 gauge. Delivering the power and utility of a pneumatic tool combined with the convenience of a cordless. The permanently sealed air cylinder maintains constant pressure ensuring an instant shot every time the trigger is pulled with no ramp-up or delay. GA 4 Cordless 2½" Angled Finish Nailer Finish and Trim, Baseboard, Cabinets, Chair Rail, Decorative Trim, Door & Window Casing, Furniture Trim, Paneling. Patented Instant-Shot Design Robust Aluminum Drive Cylinder Rugged Aluminum Magazine Eco-Friendly Energy - 8v Li-ion Battery Selectable Drive Switch Nose Mounted LED Light Adjustable Belt Hook Thumbwheel Depth-of-Drive Innovative EZ-Clear Feature Includes Storage Bag & Charger Item#: N000N Tool Weight: 6.2 lbs (2.8 kg) Height: " (0 mm) Length: " (0 mm) Width: " (6 mm) Battery: Li-ion 8v Charger: 80% in minutes, 00% in 4 Minutes Drives up to 00 fasteners on a single charge Capacity: 0 Gauge: Range: ¼" 2½" Collation: 4 angled taped strip DA.02 _¼ 2½ For fasteners see pae Series DA F- Item #: N000N 6GA 20 Cordless 2½" Angled Finish Nailer Finish and Trim, Baseboard, Cabinets, Chair Rail, Decorative Trim, Door & Window Casing, Furniture Trim, Paneling. Patented Instant-Shot Design Robust Aluminum Drive Cylinder Rugged Aluminum Magazine Eco-Friendly Energy - 8v Li-ion Battery Selectable Drive Switch Nose Mounted LED Light Adjustable Belt Hook Thumbwheel Depth-of-Drive Innovative EZ-Clear Feature Includes Storage Bag & Charger Scan to learn about the F- Item#: P000N Tool Weight: 6.2 lbs (2.8 kg) Height: " (0 mm) Length: " (0 mm) Width: " (6 mm) Battery: Li-ion 8v Charger: 80% in minutes, 00% in 4 Minutes Drives up to 00 fasteners on a single charge Capacity: 0 Gauge: 6 Range: ¼" 2½" Collation: 20 angled glued strip RH.06 ¼ MAKING HARD WORK EASIER F-6A Item #: P000N Scan to learn about the F-6A 2½ For fasteners see page 2 Series RH

4 CORDLESS FINISH & TRIM WITH FUSION TECHNOLOGY 6GA Cordless 2½" Finish Nailer Finish and trim, baseboard, cabinets, chair rail, decorative trim, door & window casing, furniture trim, paneling. Patented Instant-Shot Design Robust Aluminum Drive Cylinder Rugged Aluminum Magazine Eco-Friendly Energy - 8v Li-ion Battery Selectable Drive Switch Nose Mounted LED Light Adjustable Belt Hook Thumbwheel Depth-of-Drive Innovative EZ-Clear Feature Includes Storage Bag & Charger Item#: 6U000N Tool Weight: 6 lbs (2.2 kg) Height: " (0 mm) Length: " (26 mm) Width: " (6 mm) Battery: One Li-ion 8v Charger: 80% in minutes, 00% in 4 Minutes Drives up to 00 fasteners on a single charge Capacity: 0 Gauge: 6 Range: ¾" 2½" Collation: Straight glued strip A4, M0.06 ¾ 2½ FINISH & TRIM F-6S Item #: 6U000N 8GA Cordless 2 8" Brad Nailer F-8 Item #: 6E000N Molding and decorative trim, furniture trim, blind pinning of upholstered and trim panels, scribe molding, cabinets, drawers and picture frames. Patented Instant-Shot Design Robust Aluminum Drive Cylinder Rugged Aluminum Magazine Eco-Friendly Energy - 8v Li-ion Battery Selectable Drive Switch Nose Mounted LED Light Adjustable Belt Hook Thumbwheel Depth-of-Drive Innovative EZ-Clear Feature Includes Storage Bag & Charger Scan to learn about the F-6S Item#: 6E000N Tool Weight: 6 lbs (2.2 kg) Height: " (0 mm) Length: " (26 mm) Width: " (6 mm) Battery: One Li-ion 8v Charger: 80% in minutes, 00% in 4 Minutes Drives up to 00 fasteners on a single charge Capacity: 0 Gauge: 8 Range: 8" 2 8" Collation: Straight glued strip Scan to learn about the F-8 For fasteners see page 2 Series M0 & A4 AY.0468 AX For fasteners see page Series AY & AX Whether it's finish & trim, cabinets, furniture, hardwood flooring, trim to steel studs, baseboards, upholstery trim panels to door or window casings, we have the finish tool for you. SENCO offers a wide selection of through 2 gauge finish nailers. GA 4 2½" Angled Finish Nailer Unrivaled Durability 60 Adjustable Exhaust No tools required, quiet design Magnesium Mainbody Durable & ultra-light Rugged Internal Engine Design High-strength driver with threaded connection Metal cylinder Robust piston Over-molded Grip Reduces vibration and fatigue, increases productivity Never-Lube Design Oil-free operation Belt hook Lets the tool go where you go Baseboards, cabinets, case goods, trim, trim to steel studs, furniture and paneling. Item#: 4G000N Sequential actuation trigger Reg. Operating Pressure: 0-20 psi ( bar) Air Consumption (60 cycles per min.):.8 scfm Air Inlet: /4" NPT Tool Weight: 4. lbs (2. kg) Height:.2" (286 mm) Length: " (0 mm) Width:." (89 mm) Capacity: 04 Gauge: Range: ¼" 2½" Collation: 4 angled taped strip EZ-Clear Latch Clear jams fast Two No-Mar Pads Protects woodwork Adjustable Depth-of-Drive Allows user to achieve precise fastener placement DA.02 Driver Machined from high-strength tool steel Robust Piston/Drive Assembly Threaded Assembly The only time you'll put the FinishPro42XP down is when it's time to go home! _¼ FinishPro 42XP Item # 4G000N For fasteners see page Series DA 2½ 4

5 FINISH & TRIM GA 4 2½" Angled Finish Nailer Finish and trim, baseboard, cabinets, caskets, chair rail, decorative trim, door & window casing, furniture trim and paneling. Magnesium Mainbody-durable & ultra-light Oil-Free Motor eliminates oil carryover onto the work surface Selectable Trigger lets you control the fastening method with the flip of a switch Adjustable Depth-of-Drive EZ-Clear Latch Rotatable Belt Hook and Exhaust Includes Case, Swivel Plug and Wrench Item#: 6G000N Sequential actuation trigger Reg. Operating Pressure: 0-20 psi ( bar) Air Consumption (60 cycles per min.):.2 scfm Air Inlet: /4" NPT Tool Weight: 4.6 lbs (2. kg) Height: 2.2" ( mm) Length: " (0 mm) Width:.4" (89.6 mm) Capacity: 0 Gauge: Range: ¼" 2½" Collation: 4 angled taped strip DA.02 _¼ 6GA 2½" Finish Nailer Baseboards, cabinets, case goods, chair rail, crown molding, decorative trim, door & window casing, sash and millwork, book shelves and exterior and interior trim. Adjustable Depth-Of-Drive Ez-Clear Latch 60 Adjustable Exhaust Comfort Grip Belt Hook No-Mar Pad Includes Case Item#: X020N Sequential actuation trigger Reg. Operating Pressure: 0-20 psi ( bar) Air Consumption (60 cycles per min.): 2.6 scfm Air Inlet: ¼" NPT Tool Weight: 4.2 lbs (.9 kg) Height: 0.88" (26 mm) Length: 2.6" (0 mm) Width: " (6 mm) Capacity: 0 Gauge: 6 Range: ¼" 2½" Collation: Straight glued strip FINISH & TRIM M0, A4.06 ¼ 2½ 2½ FinishPro Mg Item #: 6G000N GA 4 2" Angled Finish Nailer Finish and trim, baseboard, cabinets, caskets, chair rail, decorative trim, door & window casing, furniture trim and paneling. Lightweight.6 lbs. Never-Lube Design Belt Hook attached to either side Adjustable Depth-of-Drive EZ-Clear Latch Adjustable Exhaust for user comfort Ergonomically Designed Comfort Grip handle No-Mar Pad to protect work surfaces Includes Case Item#: N Sequential actuation trigger Reg. Operating Pressure: 0-20 psi ( bar) Air Consumption (60 cycles per min.): 2.6 scfm Air Inlet: ¼" NPT Tool Weight:.6 lbs (.6 kg) Height: 9.62" (244 mm) Length: 2" (0 mm) Width:.2" (82. mm) Capacity: 04 Gauge: Range: " 2" Collation: 4 angled taped strip For fasteners see page Series DA DA.02 _ FinishPro 2 Item #: X020N 8GA 2 8" Brad Nailer Decorative trim, furniture trim, window beading, blind pinning of upholstered and trim panels, rattan, scribe molding, cabinets, drawers and picture frame assembly. Drives both slight and medium head brads Adjustable depth-of-drive. Never-lube design Comfort grip Belt hook No-mar pad Includes case Item#: 6002N Sequential actuation trigger Reg. Operating Pressure: 0-20 psi ( bar) Air Consumption (60 cycles per min.):.92 scfm Air Inlet: ¼" NPT Tool Weight: 2. lbs (.2 kg) Height: 9.9" (2 mm) Length: 9.8" (249 mm) Width: 2.2" (6 mm) Capacity: 0 Gauge: 8 Range: 8" 2 8" Collation: Straight glued strip For fasteners see page 2 Series MO & A4 AY.0468 AX SFN0 Item #: N 6GA 20 2½" Angled Finish Nailer Finish and trim, baseboard, cabinets, caskets, chair rail, decorative trim, door & window casing, furniture trim and paneling. Magnesium Mainbody-durable & ultra-light Oil-Free Motor eliminates oil carryover onto the work surface Selectable Trigger lets you control the fastening method with the flip of a switch Adjustable Depth-of-Drive EZ-Clear Latch Rotatable Belt Hook and Exhaust Includes Case, Swivel Plug and Wrench Item#: 6F000N Selectable actuation trigger Reg. Operating Pressure: 0-20 psi ( bar) Air Consumption (60 cycles per min.): 2.22 scfm Air Inlet: ¼" NPT Tool Weight:.8 lbs (.4 kg) Height:." (292 mm) Length: 2" (0 mm) Width: " (6 mm) Capacity: 0 Gauge: 6 Range: ¼" 2½" Collation: 20 angled strip For fasteners see page Series DA RH.06 ¼ FinishPro 2XP Item #: 6002N 8GA 8" Brad Nailer Decorative trim, furniture trim, window beading, blind pinning of upholstered and trim panels, rattan, scribe molding, cabinets, drawers and picture frame assembly. Drives both slight and medium-headed brads Requires minimum maintenance for trouble-free upkeep Muffler ensures quieter operation Never-Lube Design Includes Case Item#: 400N Sequential actuation trigger Reg. Operating Pressure: 0-20 psi ( bar) Air Consumption (60 cycles per min.):.92 scfm Air Inlet: ¼" NPT Tool Weight: 2. lbs ( kg) Height: 8.2" (20 mm) Length: 9." (24 mm) Width: 2" (0 mm) Capacity: 0 Gauge: 8 Range: 8" 8" Collation: Straight glued strip For fasteners see pages 2- Series AY & AX AY AX FinishPro Mg Item #: 6F000N 2½ For fasteners see page 2 Series RH SLP20XP Item #: 400N For fasteners see pages 2- Series AX & AY 6

6 FINISH & TRIM FINISH & TRIM 8GA 2 8" Brad Nailer Decorative trim, furniture trim, window beading, blind pinning of upholstered and trim panels, rattan, scribe molding, cabinets, drawers and picture frame assembly. Magnesium Mainbody - durable & ultra-light Metal Cylinder for increased durability Oil-Free Design Adjustable Depth-of-Drive Selective Actuation Trigger Rotatable Rear Exhaust and Belt Hook Swivel Air Plug Over-Mold Rubber Comfort Grip Includes Case and Wrench FinishPro 8Mg Item #: U002N Item#: U002N Selectable actuation trigger Reg. Operating Pressure: 0-20 psi ( bar) Air Consumption (60 cycles per min.): 2.4 scfm Air Inlet: ¼" NPT Tool Weight: 2.48 lbs (.2 kg) Height: 9." (248 mm) Length: 0." (26 mm) Width: 2." (6. mm) Capacity: 0 Gauge: 8 Range: 8" 2 8" Collation: Straight glued strip AX For fasteners see page Series AX 2GA 8" Headless Pinner Light wood assembly, finish and trim work, molding and decorative trim, dowel and joint pinning, lightweight paneling, external softwood trim, display and sign work. Powerful - ensures complete drives into hard substrates Automatically adjusts for different fastener lengths Reversible belt hook Rear exhaust with embedded muffler Ergonomic handle for all-day comfort Last nail lockout prevents dry-firing Ultra-narrow nose for tight corners Item#: 8F000N Mode of Operation: sequential trigger with lock Reg. Operating Pressure: 0-20 psi ( bar) Air Inlet: ¼" NPT Tool Weight: 2. lbs (. kg) Height:.6" (92 mm) Length:.8" (200 mm) Width:.8" (4 mm) Capacity: 00 Gauge: 2 Range: ½"- " ( mm - mm) Collation: Straight glued strip FinishPro 2SXP Item #: 8F000N CZ.026. _½ For fasteners see page for SENCO Headless Pins 2GA 2" Pinner Light wood assembly, finish and trim work, molding and decorative trim Extra Power ensures complete drives into hard substrates Automatic adjustable magazine Reversible belt hook Ergonomic handle for comfortable and all-day operation Last nail lockout prevents dry-firing Onboard storage for extra no-mar pad and jam clearing wrench Includes Case, Fittings, Wrench and Tool Oil Item#: 8M000N Sequential dual trigger safety Reg. Operating Pressure: 0-20 psi ( bar) Air Consumption (60 cycles per min.):.2 scfm Air Inlet: ¼" NPT Tool Weight: 2. lbs (.2 kg) Height: 8.89" (226 mm) Length:.8" (200 mm) Width:.8" (4 mm) Capacity: 00 Gauge: 2 Range: " 2" Collation: Straight glued strip FinishPro 2LXP Item #: 8M000N ZX.0294 For fasteners see page for SENCO 2 Ga. Pins 2 2GA 2" Headless Pinner Light wood assembly, finish and trim work, molding and decorative trim, dowel and joint pinning, lightweight paneling, external softwood trim, display and sign work. Most powerful tool in its class - ensures complete drives into hard substrates Automatically adjusts for different fastener lengths Reversible belt hook Rear exhaust with embedded muffler Ergonomic handle for all-day comfort Last nail lockout prevents dry-firing Ultra-narrow nose for tight corners Item#: 8L000N Mode of Operation: Sequential trigger with lock Reg. Operating Pressure: 0-20 psi ( bar) Air Consumption (60 cycles per min.):.2 scfm Air Inlet: ¼" NPT Tool Weight: 2. lbs (.2 kg) Height: 8.89" (226 mm) Length:.8" (200 mm) Width:.8" (4mm) Capacity: 00 Gauge: 2 Range: ½"-2" ( mm - 0 mm) Collation: Straight glued strip FinishPro 2LXP Item #: 8L000N CZ.026 _½ _2 For fasteners see page for SENCO Headless Pins 8 9

7 COMPARE APPLICATIONS & FEATURES FINISH & TRIM Gauge Gauge Gauge Gauge 6 Gauge 6 Gauge 6 Gauge 6 Gauge 8 Gauge 8 Gauge 8 Gauge 8 Gauge 2 Gauge 2 Gauge 2 Gauge 2 Gauge APPLICATIONS F- FIP42XP FIPMg SFN0 F-6A F-6S FIPMg FIP2 F-8 FIP2XP SLP20XP FIP8Mg FIP2LXP FIP0 FIP2LXP FIP2SXP Cabinets Baseboards Chair rail Decorative trim Door/window casings Furniture Hardwood floors Molding & trim Picture frames Scribe molding Trim to steel studs Window beading FEATURES Range ¼"-2½" ¼"-2½" ¼"-2½" "-2" ¼"-2½" ¾"-2½" ¼"-2½" ¼"-2½" 8"-2 8" 8"-2 8" 8"- 8" 8"-2 8" 8"-2" ½"- " ½"- 2" ½"- 8" Shank.02".02".02".02".06".06".06".06".09".09".09".09".0298".026".026".026" Capacity Weight 6.2 lbs 4. lbs 4.6 lbs.6 lbs 6.2 lbs 6 lbs.8 lbs 4.2 lbs 6 lbs 2. lbs 2. lbs 2.48 lbs 2. lbs 2.4 lbs 2. lbs 2. lbs Height ".2" 2.2" 9.62" " "." 0.88" " 9.9" 8.2" 9." 8.89" 6." 8.89".6" Length " " " 2" " " 2" 2.6" " 9.8" 9." 0.".8" 8.89".8".8" Mainbody Al / Composite Mg Mg Composite Al / Composite Al / Composite Mg Mg Al / Composite Al Al Mg AL Al Al Al Depth-of-Drive Jam EZ-Clear Trigger Actuation* Sel S, C S S, C Sel Sel Sel S Sel S, C S, C Sel Sel S S S Belt Hook NeverLube/No-oil design Exhaust Adjustable Adjustable Adjustable Adjustable Adjustable Adjustable Fixed Rear Adj. Rear Adj. Rear Rear Rear Warranty 2 yrs yrs yrs yrs 2 yrs 2 yrs yrs yrs 2 yrs yrs yrs yrs yrs yrs yrs yrs Item # N000N 4G000N 6G000N N P000N 6U000N 6F000N X020N 6E000N 6002N 400N U002N 8M000N 2C000N 8L000N 8F000N * Trigger Actuation: S: Sequential, C: Contact, Sel: Selectable Scan to learn about SENCO Mg Finish Nailers 0

8 FRAMING & SHEATHING 4 4 ¼" Paper Taped Framing Nailer Framing, sheathing, truss building, sub-flooring and decks. Other applications include crate and box assembly, pallet making, furniture frame assembly and fencing. Well balanced, ergonomic design Highly efficient internal design, means less wear and tear on the compressor Dry Fire Lockout Reduced jams and mis-feeds - Patented TrueDrive magazine Aggressive toenail safety Fits easily between studs and joists Retractable Rafter Hanger Contact or sequential trigger actuation - Patented drive selector For engineered lumber, framing, sheathing, truss building, sub-floor, decking, crate, box assembly, pallet making, furniture frame assembly, fencing and industrial applications. 20% more powerful than standard framing nailers yet weighs only 8. lbs. Tool-Free Adjustable Depth-of-Drive Retractable Rafter Hanger Reduced jams and mis-feeds Patented TrueDrive Magazine Low profile design fits easily between studs and joists. Contact or Sequential Trigger Actuation Patented drive selector Item#: 4Z00N Selectable actuation trigger Reg. Operating Pressure: 0-20 psi ( bar) Air Consumption (60 cycles per min.):.2 scfm Air Inlet: " NPT Tool Weight:.9 lbs (.8 kg) Height:.9" (02 mm) Length:." (440 mm) Width: 4." (4 mm) Capacity: 8 Shank Diameter:." -.48" Range: 2" ¼" Collation: 4 angled taped strip FramePro 2XP Item #: 4Z00N 4" Paper Taped Framing Nailer Item#: B000N Selectable actuation trigger Reg. Operating Pressure: 0-20 psi ( bar) Air Consumption (60 cycles per min.):.9 scfm Air Inlet: " NPT Tool Weight: 8. lbs (.86 kg) Height:.8" ( mm) Length:." (440 mm) Width: 4.6" (2 mm) Capacity: 8 Shank Diameter:.".48" Range: 2 8" 4" Collation: 4 angled taped strip Scan to learn about FramePro 2XP SENCO offers a wide selection of strip and coil framing and sheathing nailers. So whether you are framing, sheathing, truss building, subflooring, decking, crate and box assembly, pallet making or fencing, we have the tool for you G6, H6, K G6, H6, K6 _2 8 _2 G, H, K G, H, K ¼ _2 8 ¼ HF2 HF GE, HE, GE, HE _2 8 GC, HC, KC, ¼ GC, HC, KC _2 _2 _2 For fasteners see page 4- Series HF, GE, HE, GC, HC, KC. Page ProHead Series G, H, K, H6, H6, K6 KC _2 8 ¼. 20 ¼" Full Round Head Framing Nailer Framing, sheathing, truss building, sub-flooring and decks. Other applications include crate and box assembly, pallet making, furniture frame assembly and fencing. Well balanced and ultra-light.9 lbs. Uses less air to drive nails Highly efficient internal design Reduced jams and mis-feeds Patented TrueDrive magazine Tool-Free Adjustable Depth-of-Drive Easily fits between studs and joists Retractable rafter hanger Contact or sequential trigger actuation Patented drive selector FRAMING & SHEATHING Item#: 4H00N Selectable actuation trigger Reg. Operating Pressure: 0-20 psi ( bar) Air Consumption (60 cycles per min.):.2 scfm Air Inlet: " NPT Tool Weight:.9 lbs (.8 kg) Height:.9" (02 mm) Length:." (440 mm) Width: 4." (4 mm) Capacity: 64 Shank Diameter:.".48" Range: 2" ¼" Collation: 20 angled plastic strip FramePro 2FRHXP Item #: 4H00N 20 ½" Full Round Head Framing Nailer Framing, sheathing, truss building, sub-flooring and decks. Other applications include crate and box assembly, pallet making, furniture frame assembly and fencing. Well balanced and weight only 8.4 lbs. Uses less air to drive nails Highly efficient internal design Reduced jams and mis-feeds Patented TrueDrive magazine Tool-Free Adjustable Depth-of-Drive Easily fits between studs and joists Retractable rafter hanger Contact or sequential trigger actuation Patented drive selector SN92XP Item #: A000N Item#: A000N Selectable actuation trigger Reg. Operating Pressure: 0-20 psi ( bar) Air Consumption (60 cycles per min.):.9 scfm Air Inlet: " NPT Tool Weight: 8.4 lbs (.8 kg) Height:." (4 mm) Length: 20." (6 mm) Width: 4." (2 mm) Capacity: 64 Shank Diameter:.20".62" Range: 2 ₈" ½" Collation: 20 angled plastic strip _2 8 2 GL, HL _2 GD, HD, KD, MD _2 ¼ For fasteners see page 9-60 Series GL, HL, GD, HD, KD, MD GL, HL _2 8 GD, HD, KD, MD, M0 _2 8 HJ: Roof Tile Nail with oversize head ½ For fasteners see page 9-60 Series GL, HL, GD, HD, KD, MD.20 _2½ SN9XP Item # B000N For fasteners see page 4- Series HF, GE, HE, GC, HC, KC. Page ProHead Series G, H, K, H6, H6, K6 4 ½ ½ ½ 2

9 JOIST HANGER NAILERS JOIST HANGER NAILERS 4 ½" Metal Connector Nailer Joist hangers, foundation anchors, seismic and hurricane straps and ties, post caps and bass, plus many other metal framing hardware. Leads with the nail tip, providing accurate placement into metal connector holes patent pending nosepiece design Lightweight and well-balanced Dry-fire lockout Powerful enough to drive through engineered lumber Adjustable rafter hanger Tool-Free adjustable exhaust deflector Item #: L000N Sequential Trigger Reg. Operating Pressure: 0-20 psi ( bar) Air Consumption: (60 cycles per min): 2. scfm Air Inlet: " NPT Tool Weight: 4.6 lbs (2.08 kg) Height:.9" (02 mm) Length: 0." (26 mm) Width: 4.0" (00 mm) Capacity: 0 Shanks:."-.48" Range: ½" Collation: 4 paper tape strip..48 KJ MD _½ For fasteners see page 8Series KJ, MD JoistPro 0XP Item #: L000N 4 ½"- 2½" Metal Connector Nailer Joist hangers, foundation anchors, seismic and hurricane straps and ties, post caps and bass, plus many other metal framing hardware. Nose piece probe locates metal connector holes providing accurate nail placement Lightweight and well-balanced Dry-fire lockout Powerful enough to drive through engineered lumber Adjustable rafter hanger Tool-Free adjustable exhaust deflector Item #: 6K000N Sequential Trigger Reg. Operating Pressure: 0-20 psi ( bar) Air Consumption: (60 cycles per min.) 4. scfm Air Inlet: " NPT Tool Weight:.9 lbs (2.68 kg) Height: 4." (9 mm) Length:.8" (0 mm) Width: 4." (0mm) Capacity: 20 Shanks:."-.62" Range: ½"-2½" Collation: 4 paper tape strip JoistPro 20XP Item #: 6K000N Build it Safer and Faster with our Metal Connector System We Provide A Range Of Tools and s For Metal Framing Hardware...48,.62 KJ, MD, ND _½ _2½ For fasteners see page 8 Series KJ, MD, ND These little hand nailers are light, well-balanced and are easy to handle because of their soft rubber hand pad and size. A magnetic nail guide holds nail in place. Just a little pressure activates the firing mechanism for trouble-free fastening. Both are ideal for joist hangers, metal straps, ties and other metal framing hardware. 2" - ½" Bulk Nailer Joist hangers, foundation anchors, seismic and hurricane straps, ties and other metal framing hardware. Compact & powerful enough to drive 2 - ½ bulk nails Small size for accessibility Ultra-light at just lbs Magnetic Nose holds nail in place for safe, accurate placement Nail point can be easily placed within a recess for safe, efficient fastening Included Fitting provides plug-and-play convenience out of the box 6 per case in a retail friendly display package Mini Hand Nailer Item #: PC9 2" - " Bulk Nailer Joist hangers, foundation anchors, seismic and hurricane straps, ties and other metal framing hardware. Drives bulk nails from 2" to " Soft rubber palm pad for comfortable grip Magnetic Nose holds nail in place for safe, accurate placement Includes Leather Strap - reduces fatigue Item #: PC9 Reg. Operating Pressure: 60-0 psi (4-.6 bar) Air Consumption (60 cycles per min.): 2-4 scfm Air Inlet: /4" NPT Tool Weight: lbs (.4 kg) Height: 4" (0 mm) Length: 2." (0 mm) Width: 2" (.6 mm) Capacity: Range: Bulk nails from 2"- ½" Item #: PC08 Reg. Operating Pressure: 0-2 psi (.-8.4 bar) Air Consumption (60 cycles per min.): 2-4 scfm Air Inlet: " NPT Tool Weight: 2.4 lbs (. kg) Height:.8" (22 mm) Length: 4" (0 mm) Width:.2" (8 mm) Capacity: Range: Bulk nails from 2"- ½" and up to " with optional guide tips _2 ½ _2 _2 ½ _2 _2 ½ _2 Scan to learn about JoistPro nailers A20 Hand Nailer Item # PC08 4

10 COMPARE APPLICATIONS & FEATURES FRAMING & SHEATHING 0o-4o Paper Tape Collation Nailers 20o Full Round Head Nailers APPLICATIONS FramePro2XP SN9XP JoistPro0XP JoistPro20XP FramePro2FRHXP SN92XP Mini Hand Nailer A20 Framing/Sheathing Truss building Subflooring Decking Fencing Pallets Crate, boxes Siding Clay tiles Wood to green concrete Metal framing hardware FEATURES Range 2"-¼" 2"- 4" ½" ½"- 2½" 2"-¼" 2"-½" 2"-½" 2"- Shank."-.48"."-.48 "."-.48"."-.62"."-.48"."-.62" Capacity Weight.9 lbs 8. lbs 4.6 lbs.9 lbs.9 lbs 8.4 lbs lb 2.4 lbs Height.9".8".9" 4.".9" 4." 4".8" Length."." 0.".8"." 20." 2." 4" Depth-of-Drive Trigger Actuation* Sel. Sel. S S Sel. Sel. Rafter Hook Warranty yrs yrs yr yr yrs yrs yr yr Item # 4Z00N B000N L000N 6K000N 4H00N A000N PC9 PC08 * Trigger Actuation: S: Sequential, C: Contact, Sel: Selectable 6

11 ROOFING SENCO has dependable tools for all your roofing applications, including our popular RoofPro Coil Nailers and our " Wide Crown WC0RXP Stapler for asphalt and fiberglass shingle fastening. For installing house wrap and felt paper we offer the BC8 Button Cap Stapler and A Stapler. ¾" Coil Nailer Asphalt and fiberglass shingle nailing, for new roofs and reroofing. Attaching waterproof tar paper, metal drip edges, insulation board, and with an optional attachment MA00 for vinyl and aluminum siding. Aluminum Mainbody and Cap Easy one-handed operation, just.4 lbs. Tool-Free Adjustable Depth-of-Drive Durable Molded Comfort Grip 60 Tool-Free Adjustable Exhaust Adjustable Shingle Guide Steel Wear plates reduce shingle abrasion Adjustable Nail Canister Tool Includes Case, Tool Oil and Wrench RoofPro 4XP Item #: D00N Item#: D00N Sequential actuation trigger Reg. Operating Pressure: 0-20 psi ( bar) Air Consumption (60 cycles per min.): 6.4 scfm Air Inlet: /4" NPT Tool Weight:.4 lbs (2. kg) Height: 0." (26 mm) Length: 0.2" (260 mm) Width: 4." (0 mm) Capacity: 20 Gauge: (.20") (.0 mm) Range: ¾" ¾" Collation: Angular, flat wire wound coil M00.20 _¾ ¾ For fasteners see page 64 coil roofing nails Vinyl Siding Attachment for RoofPro 4XP Convert your RoofPro 4XP to a vinyl siding nailer. Order part # MA00 and within minutes your ready to install siding. 6GA " Crown ½" Roofing Stapler : Asphalt and fiberglass shingles, roofing felt, carton-to-skid, furniture frames, wire lathing, butt-joints, and foam insulation board. Adjustable Depth-of-Drive Carbide Wear Plates protect tool from shingles High-Strength Composite Magazine helps eliminate skipping, jams, and misfires EZ -Clear Latch provides easy access to clear fasteners Long Lasting Wear Plates and Carbide Safety Rotating Belt Hook makes the tool portable and easily to stow WC0RXP Item #: 4X000N 2GA ½" Crown 8" Staple + " Button Cap For house wrap and roofing felt installation. Cap Capacity 0 cap collation Easy Load System for staples and caps Aluminum Housing ultra-light 4. lbs. Balanced and fast for high production Belt Hook Side Mount Cap Collator holds caps regardless of tool position Includes Case, Hex Wrenches, Tool Oil, ¼ Male Coupler and Manual Item#: 4X000N: Contact actuation trigger Operating Pressure: 0-20 psi ( bar) Air Consumption (60 cycles per min.):.8 scfm Air Inlet: " NPT Tool Weight:. lbs (2. kg) Height: 9" (229 mm) Length:.2" (8 mm) Width: 4" (0 mm) Capacity: 60 Gauge: 6 Crown: " Range: ¾" ½" Collation: Straight glued and taped strip Item#: 4A000N Contact actuation trigger Reg. Operating Pressure: 60-9 psi (4.-6. bar) Air Inlet: /4" NPT Tool Weight: 4. lbs (2 kg) Height: 8." (26 mm) Length: 2." ( mm) Width:." (89 mm) Capacity: 0 Item#: M button caps and staples per box. Staple: Gauge: 2, Crown ½" Range: 8 galv. Cap: plastic, driven with staple in tandem. BC8 Button Cap Stapler Item #: 4A000N 20GA 6" Crown 8" Hammer Stapler Fast and hose free stapler for installation of roofing felt, plastic sheeting, moisture wrap and insulation. Rugged all-steel Construction Easy to service and maintain Comfortable Fluted Handle with Grip Magazine holds 68 staples Item#: PC000 Tool Weight: 2 lbs (.9 kg) Height:." (44.4 mm) Length: 2." (2.4 mm) Capacity: 68 Gauge: 20 Range: 8" Crown: 6" 8 P For fasteners see page 0 Series P ½ ROOFING M Crown: 2 (2.mm) Gauge: button caps and staples per box. Drives 2 ga. staples with plastic caps in tandem. _ 4 _½ For fasteners see page 2 Series M Button Cap H 6 8 For fasteners see page 66 Series H 8 A Stapling Hammer Item #: PC000 9

12 SPECIALTY ROOFING APPLICATIONS COMPARE APPLICATIONS & FEATURES ROOFING COIL NAIL " CROWN STAPLE " BUTTON CAP /6" CROWN STAPLE COIL NAIL /6" CROWN STAPLE 20 FRH NAILER APPLICATIONS RP4XP WC0RXP BC8 A SCN49XP SNS SERIES SN92XP Composite Shingles When installing wood shakes go with our SCN49 Coil Nailer or the SNS Series of Staplers using our stainless steel nails or staples. Clay tiles can be laid faster without breakage with our SN92XP Nailers driving the HJ oversized head roof tile nail. Wood Shakes Clay Tile Shingles Cedar Shakes: 2½" Coil Nailer.092,. EL, GL 6GA Cedar Shakes: 6" Crown 2" Heavy Wire Staplers N 6 Roofing Felt Vapor Barriers Insulation Board _ 8 _¼ Cement Board FEATURES 20 Clay Roof Tiles: ½" Full Round Head Nailers : Stainless steel fasteners are recommended Shank Diameter:.082. SCN49XP Item #: J000N : See page 2 for tool specifications 20 SN92XP Item #: A000N _2½ For stainless fasteners see page 6 Series GL. EL Clay Roof Tiles and framing, sheathing, truss building, sub-flooring and decks. Other applications include crate and box assembly, pallet making, furniture frame assembly and fencing. Well balanced and weight only 8.4 lbs. Uses less air to drive nails Highly efficient internal design Reduced jams and mis-feeds Patented TrueDrive magazine Tool-Free Adjustable Depth-of-Drive Easily fits between studs and joists Retractable rafter hanger Contact or sequential trigger actuation Patented drive selector SNS4 SNS200XP-BST SNS200XP SNS Series SNS4, SNS200XP-BST, SNS200XP See pages 0- for tool specifications Item#: A000N Selectable actuation trigger Reg. Operating Pressure: 0-20 psi ( bar) Air Consumption (60 cycles per min.):.9 scfm Air Inlet: " NPT Tool Weight: 8.4 lbs (.8 kg) Height:." (4 mm) Length: 20." (6 mm) Width: 4." (2 mm) Tile Drives oversize head roof tile nails 20 smooth shank Shank Diameter:.20" HJ Tile Nail Range: 2½" " _2 Capacity 60, Gauge: 6, Crown: 6" Range: ¼" - 2" stainless steel staples For stainless fasteners see page 69 Series N HJ2.20 _2½ HJ2.20 _ For fasteners see page 9 Series HJ Range ¾"-¾" ¾"-½" 8 ", " Cap 8" ¼"-2½" "- 2" 2½"-" Shank/Crown.20" 6 ga. x " 2" Cr. 20 ga. x 6".082"-." -6 ga. x 6" Capacity Tile Nail Range.20" Weight.4 lbs.. lbs. 4. lbs. 2 lbs.. lbs. See pages 8.4 lbs. Height 0." 9" 8."." 2" 0- for model." Length 0.2".2" 2." 2." 2.2" dimensions 20." Depth-of-Drive Jam EZ-Clear Trigger Actuation* S, C C C Sel. S, C Sel. Exhaust Adjustable Cap-fixed Adjustable Adjustable Adjustable Cap-fixed Warranty yrs yrs yrs yr yrs yrs yrs Item # D00N 4X000N 4A000N PC000 J000N See Specs. A000N * Trigger Actuation: S: Sequential, C: Contact, Sel: Selectable 2

13 COIL NAILERS SENCO has the right Coil Nailer for your application, be it framing and sheathing, decking, subflooring, wood to masonry, cement board, underlayment, pallets, packaging, crate and box assembly, siding or fencing. Available in XtremePro, ProSeries and PalletPro with nail ranges from ¼" - 8". ½" Coil Nailer For on-site, manufactured housing, including framing, sheathing, decking, subflooring, and exterior decks. Also, industrial markets such as heavy-duty pallet construction, pallet repair, and crate and box assembly. Highest Power-to-Weight Ratio in its class Light enough for one-handed operation Adjustable Depth-of-Drive Fast cycle time increases productivity E-Z Load Design saves time Standard Item#: 400N Contact actuation trigger with flat safety Framers Item#: 4004N Contact actuation trigger with toenail safety Reg. Operating Pressure: 0-20 psi ( bar) Air Consumption (60 cycles per min.): 9.4 scfm Air Inlet: " NPT Tool Weight: 8 lbs (.6 kg) Height: 4." (9 mm) Length: 2.88" (2 mm) Width:.8" ( mm) Capacity: 22-2 Shank Diameter:.099" -." Range: 2" ½" Collation: Flat, angled coil wire BK, HK _ 2 _ ¼ BL, BT, GL, HL _ 2 _ 2 _ BJ Wood to masonry _ 2¼ GD, HD, KD SCN49XP Item #: J000N 2½" Coil Nailer 2¼" Coil Nailer Siding, exterior decks, decking, exterior trim, fencing, subflooring, wood shingles, crate and box assembly and floor sheathing. Well balanced and lightweight Selectable Trigger you select mode of operation Dual Collation Allows the choice between wire or plastic collation Adjustable Depth-of-Drive A lightweight and versatile tool for boxes and crates, carton-to-skid and pallets. Aluminum Mainbody weighs.9 lbs. Adjustable Nail Canister accommodates wide range of nails High Capacity Nylon Magazine fast and easy loading Body Protection Side Steel Wear plates reduce abrasion of tool High Durability Driver and Piston Bumper for long life Item#: J000N Selectable actuation trigger Reg. Operating Pressure: 0-20 psi ( bar) Air Consumption (60 cpm.):.9 scfm Air Inlet: " NPT Tool Weight:. lbs (2. kg) Height: 2" (04 mm) Length: 2.2" (4 mm) Width:.9" (2 mm) Capacity: 20- Shank:.082"-." Range: ¼" 2½" Collation: angular flat wire wound or plastic carrier strip Item#: 4L000N Contact actuation trigger Reg. Operating Pressure: 0-20 psi ( bar) Air Consumption (60 cycles per min.):.0 scfm Air Inlet: " NPT Tool Weight:.9 lbs (2.6 kg) Height:.2" (286 mm) Length:.88" (02 mm) Width:.2" ( mm) Capacity: 00-0 Shank:.082"-.092" Range: " 2¼" Collation: angular, flat wire wound coil.082, SE, EL BE, BL, BT, GL* _¼ 2¼ COIL NAILERS.082 SE ED, EJ 2 ¼ ¾ EL _¾ _ 2¼.092 BK* _2¼ ED, EJ ¾ 2 _ 2¼.092 GD _ 2 8* _ 2½ * For soft woods only when driving 2½"Screw or Ring nails. For fasteners see page 6-64 Series SE, BE, BL, BT, EL, GL, ED, EJ, BK, GD _2¼ ¾ 2 SCN6XP Item #: 400N, 4004N 2¾" Coil Nailer For on-site, manufactured housing, including sheathing, decking, subflooring, and exterior decks. Also, industrial markets such as heavy-duty pallet construction, pallet repair, and crate and box assembly. Light and fast for greater productivity Adjustable Depth-of-Drive High Load Capacity Fast Cycle Time increases productivity E-Z Load Design saves time Item#: 200N Contact actuation trigger Reg. Operating Pressure: 0-20 psi ( bar) Air Consumption (60 cycles per min.): 8.29 scfm Air Inlet: " NPT Tool Weight:. lbs (.4 kg) Height: 2.8" (4 mm) Length: 2.88" (2 mm) Width:.8" ( mm) Capacity: 20-2 Shank Diameter:.099" -." Range: 2" 2¾" Collation: Flat, angled coil wire BK _ 2 _ 2 _ 2 _ 2½ BL, BT, GL _ 2 GD _ 2½ HR*.20 _ ½ For fasteners see page 6 & 62 Series BK, HK, BL, BT, GL, HL, BJ, GD, HD, KD *Requires a modified SCN60XP - special order # XA9 PalletPro FXP Item #: 4L000N For fasteners see page 6 Series SE, EL, ED, EJ _ 2 SCN60XP Item #: 200N For fasteners see page 60 & 6 Series BK, BL, BT, GL, GD, HR* 22 2

14 COIL NAILERS COMPARE APPLICATIONS & FEATURES COIL NAILERS 4" Coil Nailer Pallets, Truss Attachment, Heavy Duty Framing, Engineered Lumber, Docks and Commercial Application. Includes Heavy Duty Threaded T-handle for use when appropriate, or removal when not desired Flexible Collation Deflector and dust guard for improved safety in commercial environments Strengthened Driver and Bumper for extended use and reliable service Item#: L000N Contact actuation trigger Reg. Operating Pressure: 0-20 psi ( bar) Air Consumption (60 cycles per min.):.4 scfm Air Inlet: " NPT Tool Weight:. lbs (.24 kg) Height: 6." (48 mm) Length:.2" (8 mm) Width: 6" ( mm) Capacity: Shank:.099"-.48" Range: 2¼" 4" Collation: angular, flat wire wound coil BK, HK BL, BT, BE, GL, HL GD, HD, KD 2¼ 2¼ 2 8 APPLICATIONS SCN6XP SCN60XP SCN49XP PALFXP PAL00XP PAL0XP Pallets Packaging Crates/es Carton to Skid Framing/Sheathing ¼ ½ Subfloor/Decking Underlayment Cement Board PalletPro 00XP Item #: L000N Note: A special order tool 8 " Coil Nailer Pallets, Truss Attachment, Heavy Duty Framing, Engineered Lumber, Docks and Commercial Application. Includes heavy duty threaded T-handle for use when appropriate, or removal when not desired Flexible collation deflector and dust guard for improved safety in commercial environments Strengthened driver and bumper for extended use and reliable service Item#: M000N Sequential actuation trigger Reg. Operating Pressure: 0-20 psi ( bar) Air Consumption (60 cycles per min.):.4 scfm Air Inlet: " NPT Tool Weight: lbs (.9 kg) Height: 8" ( mm) Length: " (0 mm) Width: 6.6" (68 mm) Capacity: Shank:.20"-.48" Range: " 8" Collation: angular, flat wire wound coil HK.20 HL For fasteners see page 6 & 62 Series BK, HK, BL, BT, BE, GL, HL, GD, HD, KD,.20 HD.20 KD. MD.48 Siding Fence Boards Wood Shakes FEATURES Range 2"-½" 2"-2¾" ¼"-2½" " - 2¼" 2¼"-4" "- 8" Shank.099"-.".099"-.".082"-.".082"-.092".099"-.48".20"-.48" Capacity Weight 8 lbs. lbs. lbs.9 lbs. lbs lbs Height 4." 2.8" 2".2" 6." 8" Length 2.88" 2.88" 2.2".88".2" " Depth-of-Drive Jam EZ-Clear Trigger Actuation* S, C C Sel. C C S, C _ ¼ _ ¼ ½ Exhaust Adj. Adj. Adj. Adj. Fixed Fixed Warranty yrs yrs yrs yrs yrs yrs Item # 200N J000N 4L000N L000N M000N PalletPro 0XP Item #: M000N Note: A special order tool For fasteners see page 6 & 62 Series HK, HL, HD, KD, MD _ 400N with Flat Safety 4004N with Toenail Safty 24 * Trigger Actuation: S: Sequential, C: Contact, Sel: Selectable 2

15 FINE WIRE STAPLERS FINE/MEDIUM WIRE STAPLERS 8 " Crown, 8 " Fine Wire Stapler 22GA Upholstering operations, furniture assembly, cabinets, automotive vinyl roofs and interior trim, bedding manufacture, TV and stereo grill cloth, picture frames, shoe making, molding, house wrap, and roofing felt. Full " lip length - makes getting into tight spots easier Rounded Steel Cap - won't snag fabric Rear Exhaust - keeps oil off fabric Rear Magazine Bumper - protects fabric Comfort Grip - reduces fatigue Item#: 4C000N Reg. Operating Pressure: 60-9 psi (4.-6. bar) Air Consumption (60 cycles per min.):. scfm Air Inlet: /4" NPT Tool Weight: 2. lbs (0.9 kg) Height: 6" (2 mm) Length: 9.2" (2 mm) Capacity: 0-68 Gauge: 22 Range: /2" - " Crown: " Collation: Straight glued strip 8 C 2 8 SENCO has three categories of staplers; Fine, Medium and Heavy Wire. For upholstery, felt insulation, shoe making, dust cover, roof shingles and felt, spring attachments, insulating sheathing, underlayment, hardwood floors, drawers, sheathing, siding, wood shakes, manufactured housing, packaging, furniture frames, subflooring, pallets and box assembly. Available with staples from 22 - Gauge. SFW09 Item #: 4C000N For s see page 6 Series C 22GA 20GA SFT0XP 6 ", 8 ", 6 ", 2 " Crowns, 8 " Fine Wire Staplers Upholstery, furniture assembly, cabinets, bedding, picture frames, molding, roof felt, house wrap, RV construction. Heavy-Duty Steel Cap minimal recoil Rear Exhaust keeps oil off fabric Short Trigger Stroke quick precise operation Compact Tool Design One-Handed Magazine opening for fast reloads Optional Automatic Fire up to 0 drives/second Optional Double Length Magazines SFT0XP models and item numbers Item Code Description Crown Ga. UPC A/D Wire 6S000N SFT0XP A/D-wire stapler /6" S00N SFT0XP A/D-wire auto stapler /6" B Wire 6S00N SFT0XP B-wire stapler /2" S02N SFT0XP B-wire D/L stapler /2" S0N SFT0XP B-wire auto D/L stapler /2" C Wire 6S002N SFT0XP C-wire stapler " S02N SFT0XP C-wire auto stapler " S022N SFT0XP C-wire D/L stapler " S02N SFT0XP C-wire auto D/L stapler " S042N SFT0XP C-wire long nose stapler " E Wire 6S00N SFT0XP E-wire stapler /6" F Wire 6S004N SFT0XP F-wire stapler /2" S04N SFT0XP F-wire auto D/L stapler /2" G Wire 6S00N SFT0XP G-wire stapler " S02N SFT0XP G-wire D/L stapler " S0N SFT0XP G-wire auto D/L stapler " H Wire 6S06N SFT0XP H-wire auto D/L stapler /6" Item#: See below Reg. Operating Pressure: 60-9 psi (4.-6. bar) Air Consumption (60 cycles per min.):. scfm Air Inlet: /4" NPT Tool Weight: 2. lbs (0.9 kg) Height: 6." (6 mm) Length: 8.8" (42 mm) capacity: 0-92 Double Length Magazine: 20-0 Gauges: Range: /2" - " Crowns: /6", ", /6", /2" Collation: Straight glued strip SFT0XP Long Nose 22 Gauge A 6 20 Gauge E 6 G B ½ 8 ¼ ½ 8 8 ¼ 8 ¼ ½ For s see page 6-66 Series A, B, C, D, E, F, G, H SFT0XP Double Length Magazine D 6 F ½ H 6 C ¼ ½ ¼ 8 8GA ¼" Crown, 8" Medium Wire Stapler Cabinets, soffit, fascia, drawer assembly, picture frames, case backs, craft assembly. Magnesium Mainbody - durable & ultra-light Metal Cylinder for increased durability Oil-Free Design Adjustable Depth-of-Drive Selective Actuation Trigger Rotatable Rear Exhaust and Belt Hook Swivel Air Plug Over-Mold Rubber Comfort Grip Includes Case and Wrench SLS8Mg Item #: W002N 8GA ¼" Crown, 9 6" Medium Wire Stapler Cabinets, soffit, fascia, drawer assembly, picture frames, case backs, craft assembly. Magnesium mainbody provides a durable and ultra light tool for comfortable extended use. Oil free motor eliminates oil onto work surface Selectable trigger controls the fastening method Rotatable rear exhaust and belt hook Comfort rubber grip and reload indicator will keep you working comfortably and efficiently Nose Mounted LED Light - Illuminated work surface Includes case and wrench. SLS0Mg Item #: 8C000N Item #: W002N Selectable actuation trigger Reg. Operating Pressure: 0-20 psi ( bar) Air Consumption (60 cycles per min.): 2.4 scfm Air Inlet: /4" NPT Tool Weight: 2.6 lbs (.8 kg) Height: 9." (24 mm) Length: 0.2" (260 mm) Width: 2." (6. mm) Capacity: 0 Gauge: 8 Range: 2" - 8" Crown: ¼" Collation: Straight glued strip Item #: 8C000N Selectable actuation trigger Reg. Operating Pressure: 0-20 psi ( bar) Air Consumption (60 cycles per min.): 2.4 scfm Air Inlet: /4" NPT Tool Weight: 2.6 lbs (.8 kg) Height: 9." (24 mm) Length: 0.2" (260 mm) Width: 2." (6. mm) Capacity: 0 Gauge: 8 Range: 8" - 9 6" Crown: ¼" Collation: Straight glued strip L ¼ For fasteners see page 6 Series L L ¼ For fasteners see page 6 Series L

16 MEDIUM/HEAVY WIRE STAPLERS 9GA 28 8GA 6", ¼", 8" Crowns, ½" Fine & Medium Wire Staplers SLS20XP Item #: see specifications 8GA ¼", ₈" Crowns, ½" Medium Wire Staplers Drawers, casebacks, cabinet frame assembly, underlayment sheathing, paneling, molding/trim, soffits, pre finished gypsum and siding for on-site and manufactured housing. Ultra-Light (2.6 lbs.) for ease of handling Ergonomically Designed with comfort-grip Adjustable Depth-of-Drive No-Mar Pad Never-Lube Design means easier maintenance and no lubrication to stain fine wood Heavy Duty Components, including an aluminum sleeve and piston, rugged durability even in high volume production environments SLS2XP Item #: see specifications 8GA 6GA,Furniture manufacturing, cabinet frame assembly, underlayment sheathing, paneling, molding/trim, soffits, pre-finished gypsum, and siding for on-site and manufactured housing, upholstery. Ultra-Light (2. lbs.) for ease of handling Ergonomically Designed with Comfort-Grip Adjustable Depth-of-Drive No-Mar Pad Never-Lube Design means easier maintenance and no lubrication to stain fine wood Heavy Duty Components, including an aluminum sleeve and piston, rugged durability even in high volume production environments Item #: SLS2XP-L: 8200N SLS2XP-M: 8200N Contact actuation trigger (Is available with Sequential actuation trigger) Reg. Operating Pressure: -20 psi ( bar) Air Consumption (60 cycles per min.):.92 scfm Air Inlet: /4" NPT Tool Weight: 2.6 lbs (.2 kg) Height: 9" (229 mm) Length: 2" (0 mm) Width: 2" ( mm) Capacity: 68 Gauge: 8 Range: 8" - ½" Crowns: ¼", 8" Collation: Straight glued strip ¼", 8 ", 6 " Crowns, ½" Medium-Heavy Wire Stapler Drawer assembly, cabinets, corner and glue block fastening, and spring clip attachment in furniture assembly, doors and window casings, trim, and moldings. On-site construction uses for aluminum and vinyl siding, underlayment, and attachment of roofing sheathing and decking materials. E-Z Load, EZ-Clear System Quiet operation Long " Lip to get into tight spots Never-Lube Design means easier maintenance and no lubrication to stain fine wood SKSXP Item #: see specifications Item #: SLS20XP-K: 4900N SLS20XP-L: 4900N SLS20XP-L W/Case: 4900N SLS20XP-L Sencomatic:4900N SLS20XP-M Sencomatic: N SLS20XP-M: 4900N SLS20XP-R: 490N Sequential actuation triggers Reg. Operating Pressure: 0-20 psi ( bar) Air Consumption (60 cycles per min.):.92 scfm Air Inlet: /4" NPT Tool Weight: 2. lbs (. kg) Height: 8." (26 mm) Length: 2" (0 mm) Capacity: 68 Gauge: 9, 8 Range: 8" - ½" Crowns: 6", ¼", 8" Collation: Straight glued strip Item #: SKSXP-L: 0020N SKSXP-M: 002N SKSXP-N: 0084N Reg. Operating Pressure: 0-20 psi ( bar) Air Consumption (60 cycles per min.): 2.6 scfm Air Inlet: /4" NPT Tool Weight: 4.2 lbs (.9 kg) Height: 9.2" (28 mm) Length: 2.8" (4 mm) Capacity: 4 Gauge: 8, 6 Range: ¾" - ½" Crowns: ¼", 8", 6" Collation: Straight glued strip L For fasteners see page 6-68 Series K, R, M, L L ¼ M 8 ½ 8 Gauge 6 Gauge M 8 ¼ 8 6 N 8 ½ ¾ ¾ ¾ ½ 9 Gauge R 6 8 Gauge L ¼ 2 8 For fasteners see page 6-68 Series L, M ½ K ¼ ½ For fasteners see page 6-69 Series L, N, M M ½ ½ COMPARE APPLICATIONS & FEATURES: FINE/MEDIUM WIRE STAPLERS APPLICATIONS SFT0XP SFW09 SLS8Mg SLS0XP SLS20XP SLS2XP SKSXP Upholstery Shoe making Casebacks Trim & molding Cabinets & drawers Picture frames Furniture frames Underlayment Fascia & soffits Felt insulation Window & door units Siding Fencing Lathing Packaging FEATURES Range 2"- 8" 2"- 8" 2"- 9 6" 8"- 8" 8"- ½" 8"- ½" ¾"- ½" Crown 6" ½" 8" ¼" ¼" 6", ¼", 8" ¼", 8" ¼", 8", 6" Gauge , Capacity Weight 2. lbs 2. lbs 2.6 lbs 2.6 lbs 2. lbs 2.6 lbs 4.2 lbs Height 6." 6" 9." 9." 8." 9" 9.2" Length 8.8" 9.2" 0.2" 0.2" 2" 2" 2.8" Belt Hook Depth of Drive Jam EZ Clear Trigger Actuation* S, Auto D Sel. Sel. S, C, Sen. S, C C Never Never-Lube/No-oil Design Exhaust Rear Rear Rear Adj. Rear Adj. Cap fixed Cap fixed Cap fixed Warranty yrs yrs yrs yrs yrs yrs yrs Item # 4C000N W002N 8C000N Staple Item # Description Crown Ga. A/D Wire 6S000N SFT0XP A/D-wire stapler /6 22 6S00N SFT0XP A/D-wire auto stapler /6 22 B Wire 6S00N SFT0XP B-wire stapler /2 22 6S02N SFT0XP B-wire D/L stapler /2 22 6S0N SFT0XP B-wire auto D/L stapler /2 22 C Wire 6S002N SFT0XP C-wire stapler 22 6S02N SFT0XP C-wire auto stapler 22 6S022N SFT0XP C-wire D/L stapler 22 6S02N SFT0XP C-wire auto D/L stapler 22 6S042N SFT0XP C-wire long nose stapler 22 E Wire 6S00N SFT0XP E-wire stapler /6 20 F Wire 6S004N SFT0XP F-wire stapler /2 20 6S04N SFT0XP F-wire auto D/L stapler /2 20 G Wire 6S00N SFT0XP G-wire stapler 20 6S02N SFT0XP G-wire D/L stapler 20 6S0N SFT0XP G-wire auto D/L stapler 20 H Wire 6S06N SFT0XP H-wire auto D/L stapler /6 20 Staple Item # Description Crown Ga. K Wire 4900N SLS20XP-K-wire stapler /4 9 L Wire 4900N SLS20XP-L-wire stapler / N SLS20XP-L-wire stapler, with case / N SLS20XP-L-wire stapler, Sencomatic /4 8 M Wire 4900N SLS20XP-M-wire stapler N SLS20XP-M-wire stapler, Sencomatic 8 R Wire 490N SLS20XP-R-wire stapler /6 9 Staple Item # Description Crown Ga. L Wire 8200N SLS2XP-L-wire stapler /4 8 M Wire 8200N SLS2XP-M-wire stapler 8 Staple Item # Description Crown Ga. L Wire 0020N SKSXP-L-wire stapler /4 8 M Wire 002N SKSXP-M-wire stapler 8 N Wire 0084N SKSXP-N-wire stapler /6 6 * Trigger Actuation: S: Sequential, C: Contact, D: Dual Triggers, Sel: Selectable, Sen: Sencomatic 29

17 HEAVY WIRE STAPLERS HEAVY WIRE STAPLERS 6GA 6GA " Wide Crown, ½" Heavy Wire Stapler " Wide Crown, 2" Heavy Wire Stapler Wire lathing, structural insulated sheathing, corrugated carton to skid, butt-joints and furniture/cabinet frames and attaching foam insulation board. Lightweight.0 pounds Robust Firing Valve Design makes the tool fast, powerful, efficient and easy to maintain Positive-Locking Adjustable Depth-of-Drive ensures consistently flush drives EZ-Clear Latch virtually eliminates downtime caused by fastener jams. High-Strength Composite Magazine and Metal Magazine Guide prevents wear Large Inlet for increased air flow during high volume usage Durable Deflector Cap for superior impact resistance WC0XP Item #: 4W000N Wire lathing, structural insulated sheathing, corrugated carton to skid, furniture/cabinet frames, and butt-joints. Also capable of handling asphalt roof shingles and attaching foam insulation board. Lightweight. pounds Robust Firing Valve Design makes the tool fast, powerful, efficient and easy to maintain Positive-Locking Adjustable Depth-of-Drive ensures consistently flush drives EZ-Clear Latch virtually eliminates downtime caused by fastener jams. High-Strength Composite Magazine and Metal Magazine Guide prevents wear Large Inlet for increased air flow during high volume usage Durable Deflector Cap for superior impact resistance WC200XP Item #: 4Y000N Item #: 4W000N Contact actuation trigger Reg. Operating Pressure: 0-20 psi ( bar) Air Consumption (60 cycles per min.):.8 scfm Air Inlet: " NPT Tool Weight: lbs (2. kg) Height: 9" (229 mm) Length:.2" (8 mm) Width:." (89 mm) Capacity: 60 Gauge: 6 Range: 4" - ½" Short Staples Order block-out kit YK086 to drive staples under ¾ Crown: " Collation: Straight glued strip Item #: 4Y000N Contact actuation trigger Reg. Operating Pressure: 0-20 psi ( bar) Air Consumption (60 cycles per min.):.4 scfm Air Inlet: " NPT Tool Weight:. lbs (2.4 kg) Height: 0" (24 mm) Length:.2" (8 mm) Width:." (89 mm) Capacity: 60 Gauge: 6 Range: 8" - 2" Crown: " Collation: Straight glued and taped strip P ¾ ½ For fasteners see page 0 Series P P 8 2 For fasteners see page 0 Series P GA GA 6GA 6GA 6" Crown, Heavy Wire Stapler Sheathing, furniture framing, roof decking, subflooring, boxes and crate assembly, cedar shingles, furring, metal tie-down straps, fascia and soffits, ridge beam assembly, pallets and pallet repair. % more powerful than all other construction staplers in its class Innovative magazine removal mechanism maintains a clean, narrow line of sight for precise staple placement Well-balanced, ergonomic design for all-day use lip length allows access into tight corners Durable all-metal magazine construction Precision-machined drive track ensures accurate, jam-free staple drives Adjustable Depth-of-Drive and Belt Hook SNS200XP Item #: B000N 6" Crown, Heavy Wire Stapler Sheathing, furniture framing, roof decking, subflooring, crate and box assembly, pallets, cedar shingles, furring, metal tie-down straps, fascia and soffits, ridge beam assembly. 20% more powerful than the standard SNS200XP for the most demanding applications Innovative magazine removal mechanism maintains a clean, narrow line of sight for precise staple placement Well-balanced, ergonomic design for all-day use lip length allows access into tight corners Durable all-metal magazine construction Precision-machined drive track ensures accurate, jam-free staple drives Adjustable Depth-of-Drive and Belt Hook SNS200XP-BST Item #: C000N Item #: B000N Contact actuation trigger Reg. Operating Pressure: 0-20 psi ( bar) Air Consumption (60 cycles per min.): 6. scfm Air Inlet: " NPT Tool Weight:. lbs (2.4 kg) Height: " (29 mm) Length: " (8 mm) Width:." (89 mm) Capacity: 60 Gauge: (O-wire), 6 (N-wire) Range: " - 2" Crown: 6" Collation: Straight glued and taped strip Item #: C000N Contact actuation trigger Reg. Operating Pressure: 0-20 psi ( bar) Air Consumption (60 cycles per min.):.2 scfm Air Inlet: " NPT Tool Weight:.9 lbs (2.6 kg) Height: " (29 mm) Length: 4" (6 mm) Width: 4.0" (02 mm) Capacity: 60 Gauge: (O-wire), 6 (N-wire) Range: " - 2" Crown: 6" Collation: Straight glued and taped strip Gauge O 6 Gauge O Gauge N 6 For fasteners see page Series O, N Scan to learn about SNS200XP & SNS200XP_BST 6 Gauge N 6 For fasteners see page Series O, N 2 2 GA 6GA 6" Crown, 2" Heavy Wire Stapler Sheathing, sub-flooring, fascia and soffits, aluminum and vinyl siding, cedar shingles, furring, ridge beam assembly, and metal tie down straps, crate-box assembly and light furniture framing. Durable Construction, minimizes downtime and operating costs Adjustable Depth-of-Drive EZ-Clear Latch Comfort Grip Handle Item #: L000N Contact actuation trigger Reg. Operating Pressure: psi (.-8. bar) Air Consumption (60 cycles per min.):.4 scfm Air Inlet: " NPT Tool Weight: 4.6 lbs (2. kg) Height: 0." (2 mm) Length: " (8 mm) Capacity: 60 Gauge:, 6 Range: " - 2" Crown: 6" Collation: Straight glued and taped strip Gauge 6 Gauge O N 6 6 ¼ 4 2 For fasteners see page Series O, N GA 6" Crown, 2½" Heavy Wire Stapler Framing, decking, furniture frames, furring, sidewall sheathing, subflooring, window units, crate and box assembly, boxes, crates, pallets and pallet repair. Rugged Dependability Fast - up to staples per second Adjustable Depth-of-Drive All the features you want, including adjustable power for softer drives EZ-Clear latch Adjustable exhaust Item #: 6600N Contact actuation trigger Reg. Operating Pressure: psi (.-8. bar) Air Consumption (60 cycles per min.): 6.4 scfm Air Inlet: " NPT Tool Weight:.9 lbs (2. kg) Height: 2" (0 mm) Length: 4.8" (6 mm) Width:.6" (92 mm) Capacity: 0 Gauge: Range: ¼" - 2½" Crown: 6" Collation: Straight glued and taped strip Q 6 ¼ 2½ SNS4 Item #: L000N SQSXP Item #: 6600N For fasteners see page 0 Series Q 0

18 COMPARE APPLICATIONS & FEATURES: MEDIUM/HEAVY WIRE STAPLERS APPLICATIONS SKSXP WC0XP WC200XP SNS4 SNS200XP SNS200XP-BST SQSXP Cabinets & drawers Furniture frames Underlayment Decking Structural Insulated Sheathing, Insulative sheathing Window & door units Siding Fencing Wood Shakes Framing & sheathing Lathing Packaging Pallets FEATURES Range ¾"- ½" * 4"- ½" 8"- 2" "- 2" "- 2" "- 2" ¼"- 2½" Crown ¼", 8", 6" " " 6" 6" 6" 6" Gauge Capacity Weight 4.2" lbs. lbs 4.6 lbs. lbs.9 lbs.9 lbs Height 9.2" 9" 0" 0." " " 2" Length 2.8".2".2" " " " 4.8" Belt Hook Depth of Drive Jam EZ Clear Trigger Actuation* C C C C C C C Never Never-Lube/No-oil Design Exhaust Cap fixed Cap fixed Cap fixed Adjustable Cap fixed Cap fixed Adjustable Warranty yrs yrs yrs yrs yrs yrs yrs Item # 4W000N 4Y000N L000N B000N C000N 6600N Staple Item # Description Crown Ga. L Wire 0020N SKSXP-L-wire stapler /4 8 M Wire 002N SKSXP-M-wire stapler 8 N Wire 0084N SKSXP-N-wire stapler /6 6 * Trigger Actuation: S: Sequential, C: Contact, D: Dual Triggers, Sel: Selectable, Sen: Sencomatic **WC0XP Short Staples Order block-out kit YK086 to drive staples under ¾ ½" Standard Pressure Pneumatic Concrete and Steel Pinner Designed for fastening of drywall track, wood furring, hat channel,ceiling grid to concrete, concrete block and steel, wire lath to block/concrete*. 0 Times faster than powder-actuated systems No Licensing required to operate Operates in Contact or Sequential Trigger actuation modes Contact or sequential actuation trigger - patented drive selector Works with conventual air compressors, hoses, and fittings Operates in extreme temperature and altitudes SCP40XP Item #: J000N 6" Crown, 9 6" Senclamp Designed to do a wide range of wood fastening applications such as butt joints, cabinets, caskets, curios, mirror and picture frames better, faster and cheaper. Senclamp s pull the joint together during driving for a tight, permanent fit Eliminate milling, doweling, clamping, screwing and other time-consuming, cost adding operations The Senclamp High-Carbon Steel derives added strength from its special webbed design Item #: J000N Contact or Sequential actuation triggers Reg. Operating Pressure: psi (.-8. bar) Air Consumption (60 cycles per min.):.2 scfm Air Inlet: /4" NPT Tool Weight:. lbs (.2 kg) Height: 2.22" (0 mm) Length: 8.2" (462 mm) Width: 4." (4.4 mm) Concrete and Steel Capacity: 42 Smooth Shank Diameter:.09" Step Shank Diameter:.04"-.8" Head Diameter:.20" Range: ½"- ½" Shank Style: Smooth/Step Finish: Zinc plated and black oxide Collation: Standard washer style Item #: 2200N Sequential actuation triggers Item #: 4E0002N Cycle-thru restricted trigger Reg. Operating Pressure: 80-0 psi (.-. bar) Air Consumption (60 cycles per min.):.8 scfm Air Inlet: " NPT Tool Weight: 6. lbs (2.8 kg) Height: 9.8" (249 mm) Length: 2." (22 mm) Capacity: 20 Gauge: 2 Range: 6"- 9 6" Crown: 6" Collation: Straight glued strip SCXP Senclamp Item #: 2200N " Crown, ½" Corrugated Designed to do butt joints, cabinets, caskets, curios, mirror and picture frames, pallets and pallet repair, trusses, crate and box assembly better, faster and cheaper. Added Strength for larger butt joints Powerful for hard and dense material Eliminate gluing, milling, doweling, screwing and clamping Sencor Corrugated s provide twice the joint strength of ordinary fasteners Item #: 4000N Sequential actuation trigger Reg. Operating Pressure: 80-0 psi (.-. bar) Air Consumption (60 cycles per min.):. scfm Air Inlet: " NPT Tool Weight: 6.9 lbs (. kg) Height: 9.44" (240 mm) Length: 2." (8 mm) Capacity: 80 Gauge: 2 Range: ¼" - ½" Crown: " Collation: Straight glued strip SPECIALTY TOOLS.09/.8 W For s see page Concrete and Steel Collated Pins X Y ½ ½ Magnetic nosepiece for attaching -/4" galvanized metal washers (must be purchased separately) See Specialty s p For s see page Series Y 9 6 For fasteners see page Series X ¼ ½ 2 SC2 Sencor Item #: 4000N

19 SPECIALTY TOOLS SPECIALTY TOOLS 2" Pneumatic Mallet Actuated Hardwood Flooring Cleat Nailer For the installation of /2"-/4" (2-9 mm) hardwood and hardwood laminate flooring Easy on the arm, it's pneumatic action requires a single strike to drive fastener. Innovative non-marring base that adjust between ½ and ¾ flooring without the use of tools. Lightweight and well-balanced, yet % more powerful than competitive flooring nailers Safety trigger prevents accidental ejection of fasteners Extra-long ergonomic handle reduces the amount the operator has to bend over Included mallet, oil, wrenches, /4" air fitting SHF200 Item #: 8D000N Item #: 8D000N Reg. Operating Pressure: 90-0 psi ( bar) Air Inlet: /4" NPT Tool Weight: 0. lbs (4.8 kg) Height: 2." (46 mm) Length:.8" (42 mm) Width:." (8 mm) Capacity: 0 Range: ½" 2" Collation: L type cleat nails glued strips RW.06 For fasteners see page Series RW Scan to learn about SHF200 _½ _2 8GA 6" Crown, 8" Staple Clinch Tool Sisal Anvil Corrugated box fabrication, stapling bedding, light assembly and packaging, shoe making, recessed-end packaging, pre-assembled setup, boxes and displays High capacity magazine holds 2 staples less reloading means maximum production Tool-free adjustable anvil opening Rubber comfort grip reduces vibration, slipping, and fatigue Bottom-load magazine for quick reloading year limited warranty Item #: FSXP Sisal Anvil: 8J000N Sequential actuation trigger Reg. Operating Pressure: 6-00 psi (4- bar) Air Inlet: /4" NPT Tool Weight: 4.9 (2.24 kg) Height: 2.9" (2 mm) Length: 4.9" (80 mm) Width: ( mm) Jaw Openings:." or.8" Throat Depth FSXP: ¾", Capacity: 2 Gauge: 8, Range: 6"- 8" Crown: 6" Collation: Glued strip FSXP Sisal Anvil Item #: 8J000N J For fasteners see p. 66 Series J.GA 2" Pneumatic Mallet Actuated Hardwood Flooring Stapler Uses " - 2". gauge, /2" crown staplesfor the installation of /2"-/4" (2-9 mm) hardwood and hardwood laminate flooring Easy on the arm, it's pneumatic action requires a single strike to drive fastener. Innovative non-marring base that adjust between ½ and ¾ flooring without the use of tools. Lightweight and well-balanced, yet % more powerful than competitive flooring nailers Safety trigger prevents accidental ejection of fasteners Extra-long ergonomic handle reduces the amount the operator has to bend over Included mallet, oil, wrenches, /4" air fitting SHFS200 Item #: 8D0002N Item #: 8D0002N Reg. Operating Pressure: 90-0 psi ( bar) Air Inlet: /4" NPT Tool Weight:. lbs (.0 kg) Height: 2." (46 mm) Length:.8" (42 mm) Width:." (8 mm) Capacity: 02 Range: " 2" Collation: Glued strip FL 2 ½ ¾ For fasteners see page Series FL 2 8GA 6" Crown, 8" Staple Clinch Tool Corrugated box fabrication, stapling bedding, light assembly and packaging, shoe making, recessed-end packaging, pre-assembled setup, boxes and displays High capacity magazine holds 2 staples less reloading means maximum production Tool-free adjustable anvil opening Rubber comfort grip reduces vibration, slipping, and fatigue Bottom-load magazine for quick reloading 6.9 throat allows for extended reach into cartons year limited warranty Item #: FLXP Long Reach Anvil: 8J0002N Sequential actuation trigger Reg. Operating Pressure: 6-00 psi (4- bar) Air Inlet: /4" NPT Tool Weight: 4.9 (2.24 kg) Height: 2.9" (2 mm) Length: 4.9" (80 mm) Width: ( mm) Jaw Openings:." or.8" Throat Depth FLXP: 6.9" Capacity: 2 Gauge: 8, Range: 6"- 8" Crown: 6" Collation: Glued strip FLXP Clinch Tool Item #: 8J0002N J For fasteners see p. 66 Series J 9GA 6" Crown, " Hardwood & Laminate Floor Stapler For /4", /6", and " thick solid hardwood and hardwood laminate floors. Front block easily adjusts to floor thickness Industry-exclusive safety controls staple placement Power adjusted motor drives staples to consistent and controllable depth Soft rubber palm pad for comfortable grip Weighs just 2. lbs. Never-Lube design SLS20XP-HF Item #: 49002N Item #: 49002N Sequential actuation trigger Reg. Operating Pressure: 0-20 psi ( bar) Air Inlet: /4" NPT Tool Weight:.2 lbs (. kg) Height: 9" (228 mm) Length: " (2 mm) Width: " (6 mm) Capacity: 68 Gauge: 9 Range: 8" " Crown: 6" Collation: Straight glued strip R 6 _ 8 For s see page 6 & Series R 20GA 20 Ga. ½" Crown, ½" Staple Clinch Tool DFPXP Clinch Tool Item #: 8H000N Used wherever two materials must be stapled and clinched together. Corrugated box fabrication, light assembly and packaging, shoe making. High capacity magazine holds 20 staples less reloading means maximum production Tool-free adjustable anvil opening Rubber comfort grip reduces vibration, slipping, and fatigue Bottom-load magazine for quick reloading 6.9 throat allows for extended reach into cartons year limited warranty Item #: 8H000N Sequential actuation trigger Reg. Operating Pressure: 6-00 psi (4- bar) Air Inlet: /4" NPT Tool Weight: 4.9 lbs (2.24 kg) Height: 2.9" (2 mm) Length: 4.9" (80 mm) Throat Depth : 6.9" ( mm) Capacity: 20 Gauge: 20 Range: 6"- 8" Crown: ½" Collation: Glued strip F ½ 6 ½ For fasteners see p. 66 Series F 4

20 FINISH NAILER AND COMPRESSOR & TOOL KITS 8GA 2" FinishPro 8 Brad Nailer and PC00 Compressor Kit : Everything to get you started on the job is included in this one kit. Perfect for interior trim, cabinets, chair rail, crown molding, baseboards, book shelves and exterior trim. PC094 FinishPro 8 Brad Nailer gallon electric oil-less compressor ¼ x 2 coil hose All necessary air fittings Tool oil & Safety glasses Manuals Variety pack of 8 ga. brad nails FinishPro 8 Adjustable depth-of-drive control Adjustable exhaust Belt hook, comfort grip, no-mar pad Lightweight and powerful PC00 Compressor ½hp. (running), Oil free Motor Gallon capacity Tank 4 V, 2 PSI max output ¼" Quick Disconnect Coupler Individual Gauges for tank and regulated output pressure Hand Carry Lightweight - 20 lbs. (9 kg) Extremely Quiet: 68 db A FinishPro 8 Brad Nailer Reg. Operating Pressure: 0-9 psig Contact actuation trigger Air Inlet: /4" NPT Tool Weight: lbs (.6 kg) Height: 9." (28 mm) Length: 9." (248 mm) Capacity: 0 Gauge: 8 Range: 8"- 2" PC00 Compressor Power source: Electric Max. amp: 4 V Horsepower: ½ hp. (running) Pump: Oil free 90 psi: 0. Pump-up time: 0-2 psi 28 seconds Recovery time: 90-2 psi seconds Max pressure: 2 psi Tank storage: gallon Weight: 20 lbs. (9.09 kg) Dimensions: length 4", height ", width 0" AX.0468 _ 8 2 For fasteners see page Series AX MAKING HARD WORK EASIER INTRODUCING OUR PC094 2GA " Micro Pinner and PC00 Compressor Kit : Everything to get you started on the job is included in this one kit. Perfect for cabinet doors, small trim, glazing bead, carvings and ornamentals, picture frames, birdhouses, beehive assembly. PC094 FinishPro 0 Micro Pinner gallon electric oil-less compressor ¼ x 2 coil hose All necessary air fittings Safety glasses & Tool oil Manuals Variety pack of 2 ga. micro pins FinishPro 0 Micro Pinner Sequential actuation trigger Reg. Operating Pressure: 0-9 psi Air Inlet: /4" NPT Tool Weight: 2.4 lbs (. kg) Height: 6." ( mm) Length: 8.89" (22 mm) Width:.64" (4 mm) CZ.026 _½ COMPRESSORS More stored energy Longer air tool run time 200 PSI Efficiently maintains tool operating pressure FinishPro 0 Extra power for use with hard wood Easy fastener length adjustment Rear exhaust Low load fastener indicator Magazine bumper pad PC00 Compressor ½hp. (running), Oil free Motor Gallon Capacity Tank 4 V, 2 PSI max output ¼" Quick Disconnect Coupler Individual Gauges for tank and regulated output pressure Hand carry Lightweight - 20 lbs. (9 kg) Extremely Quiet: 68 db A Capacity: 0 Gauge: 2 Range: ½" " PC00 Compressor Power source: Electric Max. amp: 4 Horsepower: ½ hp.(running) Pump: Oil free 90 psi: 0. Pump-up time: 0-2 psi 28 seconds Recovery time: 90-2 psi seconds Max pressure: 2 psi Tank storage: gallon Weight: 20 lbs. (9.09 kg) Dimensions: length 4", height ", width 0" _ For fasteners see page - Series CZ PC00N OIL-FREE 0. 90psi max psi 0. hp gallon PC280 PC0968N PC0969 PC090 OIL-FREE psi 0 max psi. hp 6 gallon OIL-FREE psi 200 max psi. hp 4. gallon OIL-FREE psi 200 max psi. hp 4. gallon OIL-FREE psi 200 max psi. hp gallon PC094 6 With all of the reliability and innovation that you ve come to expect from Scan to learn about our SENCO line of compressors.

21 COMPRESSORS SENCO Compressors are made to exacting standards. Only the highest quality components are specified to provide the reliability you expect from a SENCO product. COMPRESSORS ½ hp (Running) Gallon Finish and Trim Air Compressor hp (running) 2½ Gallon Finish and Trim Air Compressor PC00N Quiet operation 68 db A Light weighs only 2 lbs. Induction motor efficient, long life operation Oil free pump design maintenance free Integrated control panel easy access to couplers and pressure control knob; highly visible gauges Rugged roll cage protects critical components Item#: PC00N Power Source: Electric Current Draw: 4 amps@v Horse Power: ½ (running) Pump: Oil free Motor: Induction 90 psi: 0. Pump Up Time : 2 seconds (0 psi) Recovery Time : 0 seconds (0 psi) Max psi: psi Tank Size: gallon Weight: 2 lbs Dimensions Length:. Width: 4. Height: 2.2" PC0 Cast Iron Cylinder for superior pump life Direct Drive Pump and induction motor for efficient operation Lightweight hot dog Design for easy maneuverability Draws only amps, so it won t trip circuit breakers Cold Start Valve allows for easy start-up in cold climates Oil-Splash Design for exceptional durability Electric Overload protection switch with manual reset Includes ¼" Universal Coupler and Compressor Oil CSA approved Item#: PC0 Power source: Electric Current Draw. Horsepower: (running) Pump: Oil-splash 90 psi:. Pump-up time: 0-2 psi 9 seconds Recovery time: 90-2 psi 0 seconds Max pressure: 2 psi Tank storage: 2. gallon Weight: 9 lbs. Dimensions Length: 20." Width: 8" Height: 8." ½ hp (Running) Gallon Finish and Trim Air Compressor ½ hp (running) 6 Gallon Pancake Air Compressor PC00 Ultra Quiet operation 68 db A Hand Carry - ultra-light, only 20 lbs. Direct Drive induction motor/pump for efficient operation hp. (peak).hp.(running), oil-free motor Gallon air capacity 4 V, 2 PSI Max Output /4" Quick Disconnect Coupler Individual gauges for tank and regulated output pressure Oil free Pump CSA approved Item#: PC00 Power source: Electric Max. amp: 4 Horsepower: ½ (running) Pump: Oil free 90 psi: 0. Pump-up time: 0-2 psi 28 seconds Recovery time: 90-2 psi seconds Max pressure: 2 psi Tank storage: gallon Weight: 20 lbs. Dimensions Length: 4" Width: 0" Height: " PC280 Oil free pump design maintenance free, no oil leaks Draws only 2 amps will not trip circuit breakers Integrated control panel easy access to couplers and pressure control knob; highly visible gauges Pancake tank design keeps compressor compact and well balanced Weighs only 8 pounds Dual couplers run 2 hoses simultaneously Fully shrouded protects critical components 0 Maximum psi Item#: PC280 Power source: Electric Current Draw. 2 Horsepower: ½ (running) Pump: Oil free Motor: Universal 90 psi: 2.8 Pump-up time: 2 seconds (0-0 psi) Recovery time: seconds (20-0 psi) Max pressure: 0 psi Tank storage: 6 gallon Weight: 8. lbs. Dimensions Length: " Width: 6." Height: 8" hp (Running) 2½ Gallon Twin Tank Finish and Trim Air Compressor ¾ hp (running) 4½ Gallon Twin Stack Air Compressor PC0968 Oil free design for less maintenance and no oil leaks Direct drive pump and induction motor for efficient operation Weighs 8 lbs., easy hand-carry use Twin stack tanks Draws only 8 amps, won t trip circuit breakers Cold start valve allows easy start-up in cold climates Includes: ¼ quick disconnect coupler, regulator, tank and outlet pressure gauges CSA approved Item#: PC0968 Power source: Electric Max. amp: 8 Horsepower: (running) Pump: Oil free 90 psi: 2.2 Pump-up time: 0 - psi 82 seconds Recovery time: 90 - psi seconds Max pressure: psi Tank storage: 2. gallons Weight: 8 lbs. Dimensions Length: 6" Width: " Height:." PC0968N Induction motor efficient, long life operation Oil free pump design maintenance free Integrated control panel easy access to couplers and pressure control knob; highly visible gauges Dual couplers run 2 hoses simultaneously Rugged roll cage protects critical components and provides multiple grip points for handling and portability Low-volt start at 9 volts 200 Maximum psi - More stored energy - Longer air tool run time - Efficiently maintains tool operating pressure Item #: PC0968N Power Source: Electric Current Draw: 4 Horsepower: ¾ (running) Pump: Oil free Motor: Induction 90 psi: 4.9 Pump-up time: 9 seconds (0-200 psi) Recovery time: 0 seconds ( psi) Max pressure: 200 psi Tank storage: 4. gallon Weight: 6 lbs Dimensions Length:.2 Width: 2 Height:." 8 9

22 COMPRESSORS COMPARE APPLICATIONS & FEATURES 2 hp (running) 4. Gallon Twin Tank Air Compressor PC ¾ hp (running) 4½ Gallon Roll Away Air Compressor PC0969 ¾ hp (running) Gallon Vertical Electric Air Compressor PC090 Cast Iron Cylinder for superior pump life Direct Drive Pump and induction motor for efficient operation Oil-Splash Design for exceptional durability Draws only 4 amps, so it won t trip circuit breakers Cold Start Valve allows for easy start-up in cold climates Twin Vertical Stack Tanks Electric overload protection switch with manual reset Includes ¼" Universal Coupler and Compressor Oil CSA approved Induction motor efficient, long life operation Oil free pump design maintenance free Integrated control panel easy access to couplers and pressure control knob; highly visible gauges Dual couplers run 2 hoses simultaneously Rugged roll cage protects critical components and provides multiple grip points for handling and portability Telescoping handle stays compact when unit is stored, extends for easy transporting Semi-pneumatic wheels rugged, easy portability Low-volt start at 9 volts 200 Maximum psi - More stored energy - Longer air tool run time - Efficiently maintains tool operating pressure Induction motor efficient, long life operation Oil free pump design maintenance free Integrated control panel easy access to couplers and pressure control knob; highly visible gauges Dual couplers run 2 hoses simultaneously Rugged roll cage protects critical components and provides multiple grip points for handling and portability Telescoping handle stays compact when unit is stored, extends for easy transporting Semi-pneumatic wheels rugged, easy portability Low-volt start at 9 volts 200 Maximum psi - More stored energy - Longer air tool run time - Efficiently maintains tool operating pressure Power source: Electric Current Draw. 4 Horsepower: 2 (running) Pump: Oil-splash 90 psi: 4.4 Pump-up time: 0-2 psi 6 seconds Recovery time: 90-2 psi 6 seconds Max pressure: 2 psi Tank storage: 4. gallon Weight: 60 lbs. Dimensions Length: 20." Width: 6." Height: 4." Item #: PC0969 Power Source: Electric Current Draw: 4 Horsepower: ¾ (running) Pump: Oil free Motor: Induction 90 psi: 4.9 Pump-up time: 9 seconds (0-200 psi) Recovery time: 0 seconds ( psi) Max pressure: 200 psi Tank storage: 4. gallon Weight: 8 lbs Dimensions Length: 8 Width : Height: 2" Item #: PC090 Power Source: Electric Current Draw: 4 Horsepower: ¾ (running) Pump: Oil free Motor: Induction 90 psi: 4.9 Pump Up Time : 20 seconds (0 200 PSI) Recovery Time : 8 seconds ( PSI) Max psi: 200 psi Tank Size: gallon Weight: 99 lbs Dimensions Length: 8., Width: 9.2, Height: 40" APPLICATIONS PC00N PC00 PC0968 PC0 PC280 Hobbies Upholstery Finish, trim Light wood assembly Picture Frames Cabinets FEATURES Power Source Electric Electric Electric Electric Electric Max v HP Running ½ ½ ½ Pump Oil free Oil free Oil free Oil splash Oil free 90 psig Pump Up/Recovery time 2 sec./ 0 sec. 28 sec../ sec. 82 sec./ sec. 9 sec./ 0 sec 2 sec./ sec. Max pressure psi 2 psi psi 2 psi 0 Tank storage gal. gal. Twin 2. gal. 2. gal. 6 gal.. Weight 2 lbs. 20 lbs. 8 lbs. 9 lbs. 8 lbs Length/ Width/Height./4"/2.2" 4"/0"/" 6"/"/." 20.""." "/6."" Cold start valve Breaker CSA Approved Warranty yr yr yr yr yr APPLICATIONS PC0968N PC PC0969 PC090 Upholstery Finish, trim Roofing Siding Decking/Subfloors Framing/Sheathing Pallets/Packaging FEATURES Power Source Electric Electric Electric Electric Max 20v 4 4@ v 4 4 HP Running ¾ 2 ¾ ¾ Pump Oil free Oil splash Oil free Oil free 90 psig Pump Up/Recovery time 9 sec./0 sec. 6 sec../ 6 sec. 90 sec./ 0 sec. 20 sec./ 8 sec. Max pressure 200 psi 2 psi 200 psi 200 psi Tank storage Twin 4. gal. 4. gal. 4. gal. gal. Weight 6 lbs. 60 lbs. 8 lbs. 99 lbs. Length/ Height/Width.2"/2"/." 20."/6."/4." 8"/"/2" 8."/9.2/40" Cold start valve Breaker CSA Approved Warranty yr yr yr yr 40 4

23 SENCO AUTO-FEED SCREWDRIVERS SENCO AUTO-FEED SCREWDRIVERS SENCO's Auto-Feed Screw Systems are the perfect solution for high volume production as well as one man operations, it's like having an extra hand. Our auto-feed screw systems will dramatically increase your productivity and job site safety, saving you time and money on every job. 2" Cordless 8v Li-ion,000 RPM Drywall to wood, drywall to steel, cement board, sheathing to wood, underlayment and flooring, fiberglass backed gypsum sheathing, sheathing to steel, wood decking, metal framing, structural steel decking. 000 rpm high-speed motor Patent pending corner-fit feed system Tool-free screw length adjustment Precise depth-of-drive adjustment with depth lock Quick slide button bit change Variable speed trigger with lock and reverse Belt hook -right or left handed adjustable DS2-8V 4X FASTER than corded screwdrivers and loose screws* Increase Job Site Productivity By 0%! Item #: W000N 2" Cordless 8v Li-ion 2,00 RPM An Average 200 Sq. ft. home Uses 800 Sq. ft. of drywall SENCO Duraspin Auto-Feed Screw Systems increase overall site productivity by 0% over traditional installation methods. On Average a Duraspin Auto-Feed Screw System tool user can hang a sheet of 4 x 2 drywall in just over 60 seconds, as compared to 4-8 minutes using none auto-feed screwdriver. Loading and driving screws were reduced from 4- seconds (required by bulk screwdrivers) to under second per screw with SENCO Duraspin. Duraspin Auto-Feed Screw Systems eliminates the need to reach for fasteners and position them on magnetic screw tip. Duraspin Cordless tools eliminates tangled extension cords, tripping hazards and slowdowns resulting from unplugging cords. Duraspin allows for one-handed screw fastening with either the right or left hand, freeing the second hand to steady your work surface. DuraSpin Screw Fastening System Time & Motion Study. July, 200. R.S.MEANS. CONSULTING SERVICES. 42 Screwdrivers vs. with loose screws Duraspin Auto-Feed Screw Systems DS22-8V = 4.0 days to complete home Includes Two-8V li-ion batteries, charger, drywall nosepiece, wood nosepiece, storage bag, 2 drive bits Item #: X000N " Cordless 8v Li-ion 2,00 RPM Can hang 2000 Sq. ft. of Drywall per Day Underlayment and flooring, fiberglass backed gypsum sheathing, sheathing to wood, drywall to steel, metal framing, sheathing to steel, drywall to wood, wood decking, cement board, structural steel decking, composite decking. 200 rpm high-torque motor Patent pending corner-fit feed system Tool-free screw length adjustment Precise depth-of-drive adjustment with depth lock Quick slide button bit change Variable speed trigger with lock and reverse Belt hook -right or left handed adjustable An independent productivity analysis compared SENCO AUTO-FEED SCREW SYSTEMS to loose screw fastening - and the results were dramatic. PRODUCTIVITY FINDINGS Includes Two-8V li-ion batteries, charger, drywall nosepiece, wood nosepiece, storage bag, 2 drive bits Can hang 2640 Sq. ft. of Drywall per Day =.0 days Sheathing to wood, sheathing to steel, wood decking, composite decking, rigid foam insulation, cement board, underlayment and flooring, drywall to wood, drywall to steel, fiberglass backed gypsum sheathing, metal framing, structural steel decking rpm high-torque motor Patent pending corner-fit feed system Patented sliding screw guide Tool-free screw length adjustment Precise depth-of-drive adjustment with depth lock Quick slide button bit change Variable speed trigger with trigger lock Belt hook -right or left handed adjustable to complete home [with crew members working an eight hour day] DS2-8V Includes Two-8V li-ion batteries, charger, drywall nosepiece, wood nose piece, storage bag, 2 drive bits Item #: Y000N Item# W000N RPM: 0,000 Battery: 8-Volt. Ah Compact Li-ion Torque: 60 inlb Weight:.2 lbs. (2.6 kg) Height: 9." (24 mm) Length: " (8 mm) Width:.4" (86 mm) Recharge Time: hour Drives per charge: Screw Diameters: #6 #8 Screw Lengths: " 2"* For fasteners see page - Sold separately * FC0822 Nosepiece drives /2 2 screws. Drive Bits-two per pack: EA029, EA0298, EA0299 Accessories page 8-9 Item# X000N RPM: 0 2,00 Battery: 8-Volt. Ah Compact Li-ion Torque: 90 inlb Weight: 4.9 lbs. (2.24 kg) Height: 9." (24 mm) Length: " (8 mm) Width:.4" (86 mm) Recharge Time: hour Drives per charge: Screw Diameters: #6 #0 Screw Lengths: " 2"* For fasteners see page - Sold separately * FC0822 Nosepiece drives /2 2 screws. Drive Bits-two per pack: EA029, EA0298, EA0299 Accessories page 8-9 Item# Y000N RPM: 0 2,00 Battery: 8-Volt. Ah Compact Li-ion Voltage: 8 Torque: 90 inlb Weight:. lbs. (2. kg) Height: 9." (24 mm) Length:." (94 mm) Width:.4" (86 mm) Recharge Time: hour Drives per charge: Screw Diameters: #6 #0 Screw Lengths: " " For fasteners see page - Sold separately Drive Bits-two per pack: EA000, EA00, EA002 Accessories page 8-9 4

24 SENCO AUTO-FEED SCREW SYSTEMS AND ATTACHMENTS SENCO AUTO-FEED SCREWDRIVERS 2" Corded,000 RPM Drywall to wood, drywall to steel, cement board, sheathing to wood, underlayment and flooring, fiberglass backed gypsum sheathing, sheathing to steel, wood decking, composite decking, metal framing, structural steel decking. 000 rpm high-speed AC motor Patent pending corner-fit feed system Tool-free screw length adjustment Precise depth-of-drive adjustment with depth lock Quick slide button bit change Variable speed trigger with lock and reverse Belt hook-right or left handed adjustable Includes Drywall nosepiece, wood nosepiece, storage bag, 2 drive bits DS2-AC Item #: T000N 2" Corded 2,00 RPM Sheathing to steel, sheathing to wood, drywall to steel, underlayment and flooring, fiberglass backed gypsum sheathing, metal framing, drywall to wood, wood decking, composite decking, cement board, structural steel decking rpm high-torque AC motor Patented-pending corner access feed system Variable speed trigger with reverse Tool-free screw length adjustment Precise depth-of -adjustment with depth lock Slide button bit change Belt hook -right or left handed adjustable 2" Auto-feed Attachment for Screwdrivers Item #: T000N RPM: 0,000 Torque: 0 inlb Amp draw: 6.0 Voltage: 20 V/60 Hz Weight:. lbs. (2.8 kg) Height: 9.2" (2 mm) Length: 6." (42 mm) Width: 2." (0 mm) Precise depth-of-drive adjustment with depth lock Patented sliding rail Patent pending corner-fit feed system Screw Diameters: #6 #0 Screw Lengths: " 2"* For fasteners see page - Sold separately * FC0822 Nosepiece drives /2 2 screws. Drive Bits-two per pack: EA029, EA0298, EA0299 Accessories page 8-9 Item #: U000N RPM:0 2,00 Torque: 00 inlb Amp draw: 6.0 Voltage: 20 V/60 Hz Weight: 4. lbs. (2. kg) Height: 9.2" (2 mm) Length: 6." (42 mm) Width: 2." (0 mm) Screw Diameters: #6 #2 Screw Lengths: " 2"* Includes Drywall nosepiece, wood nosepiece, storage bag, 2 drive bits DS22-AC Item #: U000N " Corded 2,00 RPM Sheathing to steel, rigid foam insulation, drywall to wood, drywall to steel, cement board, wood decking, composite decking, underlayment and flooring, fiberglass backed gypsum sheathing, structural steel decking, metal framing rpm high-torque AC motor Patent pending corner-fit feed system Variable speed trigger with lock and reverse Tool-free screw length adjustment Patented sliding screw guide Precise depth-of-drive adjustment with depth lock Quick slide button bit change Belt hook-right or left handed adjustable Includes Drywall nosepiece, wood nosepiece, storage bag, 2 drive bits DS2-AC Item #: V000N 44 Sold separately * FC0822 Nosepiece drives /2 2 screws. Drive Bits-two per pack: EA029, EA0298, EA0299 Screw Diameters: #6 #0 Screw Lengths: " 2"* For fasteners see page - Bulk Screwdriver adapter for major brands DS220 Item#: 6W000N " Auto-feed Attachment for Screwdrivers Item Code: 6W000N Weight:. lbs (.68 kg) Height:." (89 mm) Length: 20." (2 mm) Width: 2." (0 mm) Requires Assembly to Screwdriver Sold separately *FC0822 Nosepiece drives /2 2 screws. Drive Bits-two per pack For fasteners see page - : Drywall to wood, drywall to steel, sheathing to wood, sheathing to steel, wood decking, cement board, composite decking, underlayment and flooring, metal framing, structural steel decking, fiberglass backed gypsum sheathing. Accessories see page 8-9 : Sheathing to wood, sheathing to steel, wood decking, composite decking, underlayment and flooring, structural steel decking, drywall to wood, drywall to steel, cement board, fiberglass backed gypsum sheathing, rigid foam insulation, metal framing. Item #: 6W000N Weight:. lbs (.6 kg) Height:." (89 mm) Length: 20." (2 mm) Width: 2." (0 mm) Requires Assembly to Screwdriver Precise depth-of-drive adjustment with depth lock Patented sliding rail Patent pending corner-fit feed system Includes extension pole with adjustable power grip handle for driving screws in a standing position. Screw Diameters: #6 #2 Screw Lengths: " " Includes Attachment, extension pole with adjustable power grip handle, and toe-nail nose piece. For fasteners see page - Sold separately Drive Bits-two per pack Bulk Screwdriver adapter for major brands Accessories see page 8-9 Accessories page 8-9 Item# V000N RPM: 0 2,00 Torque: 00 inlb Amp draw: 6.0 Voltage: 20 V/60 Hz Weight: 4.8 lbs. (2. kg) Height: 9.2" (2 mm) Length:.2" (48 mm) Width: 2." (0 mm) Screw Lengths: " " Screw Diameters: #6 #2 For fasteners see page - Sold separately Drive Bits-two per pack: EA000, EA00, EA002 Accessories page 8-9 DS20 Item #: 6W000N 4

25 SENCO AUTO-FEED ATTACHMENT KITS SENCO SCREWDRIVERS Models available with 200 or 4000 RPM Screwdrivers. in TOOL ) Extension for subfloor and decking 2) to Auto-Feed Attachment ) Drives bulk screws Scan to learn about Auto-Feed Screwdrivers " Corded Attachment with 200 RPM Screwdriver Kit : Sheathing to wood, sheathing to steel, wood decking, cement board, underlayment and flooring, drywall to wood, drywall to steel, composite decking, fiberglass backed gypsum sheathing, structural steel decking, rigid foam insulation, metal framing. Includes extension pole with adjustable power grip handle for driving screws in a standing position Precise depth-of-drive adjustment with depth lock Patented sliding rail High torque 200 rpm motor Patent pending corner-fit feed system Rugged storage bag fits fully assembled kit Quick release for easy bit access DS42AC Item #: 6W002N " Corded Attachment with 4000 RPM Screwdriver Kit Includes SENCO SG20 screwdriver, industrial grade DS20 attachment, extension pole with adjustable power grip handle, storage bag and drive bits. : Sheathing to wood, sheathing to steel, wood decking, composite decking, underlayment and flooring, structural steel decking, cement board, drywall to steel, fiberglass backed gypsum sheathing, metal framing, rigid foam insulation, drywall to wood. DS440AC Item #: 6W00N 46 Includes SENCO SG400 screwdriver, industrial grade DS20 attachment, extension pole with adjustable power grip handle, storage bag and drive bits These High Performance SENCO screwdrivers are the ideal tools for users who require power, speed, and versatility. The SG20 and SG400 tools feature a high-torque, variable-speed motor to tackle tough drywall, wood, and steel applications. High Performance 4,000 RPM Screwdrivers Sheathing to wood, sheathing to steel, wood decking, cement board, underlayment and flooring, drywall to wood, drywall to steel, composite decking, fiberglass backed gypsum sheathing, structural steel decking, rigid foam insulation, metal framing. Metal gear housing for increased durability and reliability Depth sensitive clutch with adjustable nose cone for precise depth control For a perfect mate to Senco s DuraSpin Auto-Feed attachments use MB0 adapter High speed 4000 rpm motor 0' cord for greater mobility Reversing lever Trigger lock Screw Lengths: " " Screw Diameters: #6 #2 For fasteners see page 4- Sold separately Drive Bits-two per pack EA04 EA0 EA06 SG400 Item #: 6X0004N Accessories see page 8-9 Includes extension pole with adjustable power grip handle for driving screws in a standing position Precise depth-of-drive adjustment with depth lock Patented sliding rail High speed 4000 rpm motor Patent pending corner-fit feed system Rugged storage bag fits fully assembled kit Quick release for easy bit access Item# 6W002N RPM: Torque : 00 inlb Amps draw: 6.4 Weight: 6.. lbs ( kg) Height: 8" (20 mm) Length: 20." (2 mm) with extension pole: 9.0 (990 mm) Width: 2." (0 mm) Kit Item# 6W00N RPM: Torque : 82 inlb Amps draw: 6.4 Weight: 6.8 lbs (.08 kg) Height: 8" (20 mm) Length: 20." (2 mm) with extension pole: 9.0" (990) Width: 2." (0 mm) Sheathing to wood, sheathing to steel, wood decking, composite decking, underlayment and flooring, structural steel decking, cement board, drywall to steel, fiberglass backed gypsum sheathing, metal framing, rigid foam insulation, drywall to wood. Metal gear housing for increased durability and reliability Depth sensitive clutch with adjustable nose cone for precise depth control For a perfect mate to Senco s DuraSpin Auto-Feed attachments use MB0 adapter High torque 200 rpm motor 0' cord for greater mobility Reversing lever Trigger lock For fasteners see page 4- Accessories see page 8-9 Sold separately Drive Bit Tips-two per pack EEA008 Accessories see page 8-9 High Performance 2,00 RPM Screwdrivers Screw Lengths: " " Screw Diameters: #6 #2 Sold separately Drive Bits-two per pack EA04 EA0 EA06 Includes Two drive bit tips Item #: 6X0004N Bit Shank Size: /4 hex Volts: 20 Amps: 6.4 No Load Speed: Torque: 82 inlb Clutch: Standard Weight:. lbs (.4 kg) Height: 8" (20 mm) Length: 9.' (24 mm) Width: 2.6" (6 mm) Includes Two drive bit tips SG20 Item #: 6X0002N Item #: 6X0002N Bit Shank Size: /4 hex Volts: 20 Amps: 6.4 No Load Speed: Torque: 00 inlb Clutch: Standard Weight:. lbs (.6 kg) Height: 8" (20 mm) Length: 0' (24 mm) Width: 2.6" (6 mm) Sold separately Drive Bit Tips-two per pack EEA008 Accessories see page 8-9 4

26 COMPARE APPLICATIONS & FEATURES SENCO AUTO-FEED SCREW SYSTEMS Screw Systems Recommendations Good Better BEST Cordless 8v Li-ion Corded Attachments & Screwdriver with Attachment Kits Auto-Feed Screwdrivers: APPLICATIONS DS2-8v DS22-8v DS2-8v DS2-AC DS22-AC DS2-AC DS220 DS20 DS440AC DS42AC Drywall to Wood Drywall to Steel Sheathing to Wood Sheathing to Steel Wood Decking Composite Decking Cement Board Underlayment & Flooring Fiberglass Backed Gypsum Sheathing Metal framing Structural Steel Decking Rigid Foam Insulation FEATURES Screw Range " - 2" " - 2" " - " " - 2" " - 2" Screw Diameter #6 - #8 #6 - #0 #6 - #0 #6 - #0 #6 - #2" Speed (RPM) Torque (in lbs) Current (Amps) Voltage (Volts) Weight (lbs).2 lbs 4.9 lbs. lbs. lbs 4. lbs Reversible Yes Yes Yes Yes Yes Power Type 8v Li-ion 8v Li-ion 8v Li-ion Corded Corded Assembly to Screwdriver Warranty yr yr yr yr yr Item # W000N X000N Y000N T000N U000N " - " " - 2" " - " " - " " - " #6 - #2 #6 - #0 #6 - #2 #6 - #2" #6 - # lbs. lbs. lbs 6.8 lbs 6. lbs Yes - - Yes Yes Corded - - Corded Corded - Yes Yes Included Included yr yr yr yr yr V000N 6W000N 6WOOON 6W00N 6W002N Scan to see Duraspin Auto-Feed Screwdrivers in D Scan to learn about our line of SENCO Auto-Feed Screwdrivers 48 49

27 FASTENER CODING SENCO Identification Charts Identification -DIGIT STAPLE CODING SYSTEM st DIGIT 2nd & rd DIGIT Crown Width Thk. Ga. Leg Length A / (mm) B / /2 (4mm) C /6 (mm) D / /4 (6mm) E / /6 (8mm) F / (0mm) G /6 (mm) H / /2 (2mm) J / /6 (4mm) K / (6mm) L / /4 (9mm) M (22mm) N / (2mm) O / (28mm) P /4 (2mm) Q / (mm) R / /2 (8mm) S / (4mm) T /4 (44mm) U / (48mm) W / (0mm) X (4mm) Y / /4 (6mm) Z Special s (60mm) /2 (6mm) 26 2-/4 (0mm) 2 (6mm) 28 -/4 (82mm) 29 -/2 (90mm) 4th DIGIT Point. A Blunt B Chisel C Inside Chisel D Outside Chisel E Easy Clinch F Divergent G Outside Chisel Div. H Cross Cut Chisel J Cross Cut Chisel Div. K Spear L Chisel Div. M Self Clinch N Sharp Chisel R Step 8-DIGIT NAIL CODING SYSTEM th DIGIT Wire Chem. & Fin A Galv. Std. Tensile. A in N,P,Q, S wire staples only Class Galvanized B Galv. High Tensile C Liq. Fin. Std. High Ten. D Liq. Fin. Ult. High Ten. E Liq. Fin. Low Tensile F Senclamp G Stainless Steel H Stainless Steel Hi. Ten. AISI-04 J Monel K Steel Core Aluminum L Steel Core Bronze M Aluminum N Bronze P Reg. Galv. (flash) or Greater Q Class Galv. Std. Tensile R Brt. Basic Std. Tensile S Special Hardened Steel U Stainless Steel, AISI-6 6th DIGIT Coating A Clear Glue B Sencote C Painted & Sencote D Painted & Sencote E Coated F To be Painted G Extractable Example: G08BAA G = Crown,.04 Width,.02 Thickness 08 = /2 Leg Length B = Chisel Point A = Galvanized Standard Tensile (Class Galv. only for N, P, Q, S staples) A = Plain th DIGIT B Bandline C Container G Glue N Carton count change P Bulk pack R Retail pack S Special strong glue T Taped strips V Angular strips Z Coiled Staples GA 4 DA FinishPro 42XP FinishPro Mg SFN0 (2d) (d) (4d) (d) (6d) (d) (8d) _ Finish Nails Angled Strip DA ¼ DA ½ DA9 ¾ F- GT6DA DA2 2_ DA2 2¼ DA2 2½ SENCO Ga. 4 Angled Strip Finish Nails Furniture and cabinets, molding and trim, baseboard, chair rail, doors and window casings Length Item Code Count Point Finish Coating Package FASTENERS DAEPBN 4.M Chisel Bright Sencote ¼ DAEPBN 4.M Chisel Bright Sencote ½ DAEPBN 4.M Chisel Bright Sencote ¾ DA9EPBN 4.M Chisel Bright Sencote 2 DA2EPBN 4.M Chisel Bright Sencote 2¼ DA2EPBN 4.M Chisel Bright Sencote 2½ DA2EPB.M Chisel Bright Sencote ½ A000 0.M Chisel Bright Sencote Clamshell ¾ A00 0.M Chisel Bright Sencote Clamshell 2 A M Chisel Bright Sencote Clamshell 2½ A M Chisel Bright Sencote Clamshell ¼ DAEABN 4.M Chisel Galv Sencote ½ DAEABN 4.M Chisel Galv Sencote ¾ DA9EABN 4.M Chisel Galv Sencote 2 DA2EABN 4.M Chisel Galv Sencote 2½ DA2EAB.M Chisel Galv Sencote 2 A M Chisel Galv Sencote Clamshell 2½ A M Chisel Galv Sencote Clamshell 2 DA2EGBN 2.M Chisel Stainless Sencote 2½ DA2EGB.2M Chisel Stainless Sencote ½ DAAIA 4.M Diamond Hardened* Plain ¾ DA9AIA 4.M Diamond Hardened* Plain *Hardened reg. galv. heat treated gauge for steel stud and trim application st DIGIT 2nd DIGIT rd & 4th DIGIT th DIGIT 6th DIGIT th DIGIT 8th DIGIT Gauge inch Head/Shank Form Length Point. Wire Chem. & Fin Finish A A Brad, Smooth 08 /2 (2mm) 46 mm (-) A Diamond A Reg. Galv. Std. Ten. A Plain A Coil, flat wnd., angular wire, 6.0mm Euro, bulk pack B C Flat, Smooth 0 (6mm) 4 40mm (-9/6) B Blunt Diamond B Reg. Galv. Olive Drab B Sencote B Coil, flat wound, straight wire, carrier strip C D Flat, Smooth FRH /4 (9mm) 49 4mm (-/4) C Blunt D Exterior C Painted C Coil, flat wound, angular wire,carrier strip D..02 E Flat, Ring Shank 2 (22mm) 0mm (2) E Chisel E Hot Dip Galv. Heat Trtd. D Painted & Sencote D FRH-paper tape, 4 collation E..092 F Flat, Screw Shank (2mm) 2 mm (2-) F Blunt Chisel G Stainless Stl. AISI-04 E Coated by Vendor F Coil, flat wound, angular wire, 8.2mm spacing F G Conical, Ring Drywall FRH 4 (28mm) 4 60mm (2-) G Semi-Blunt H Bright Basic Ht. Trtd. F Sencoted-Full Cov. G Coil, flat wound, straight wire G.. H T-head, Smooth /4 (2mm) 6mm (2-9/6) X Special I Reg. Galv. Ht. Trtd. S New Glue H Coil, flat wound, angular wire,.0mm spacing H..20 J Flat, Smooth O/S FRH 6 (mm) 6 0mm (2-/4) J Hot Dip Galv. Med. Carbon J Special head feature I..24 K Flat, Screw O/S FRH /2 (8mm) mm () M Aluminum K Special strip length J 2..0 L Flat, Ring FRH 8 (4mm) 8 80mm (-) P Bright Basic Std. Ten. L FRH plastic collation.mm spacing K 0.2. M Flat, Ring O/S FRH 9 /4 (44mm) 9 90mm (-9/6) Q Bright Basic Med. Carbon N Carton count change L 0.2. N Flat, Smooth U/S FRH 20 (48mm) 60 00mm (4) R Reg. Galv. Yel. Chromate P Bulk pack or high load coil M R Duplex Head 2 2 (0mm) 6 0mm (4-/6) S Hot Dip Galv. 4 Micron Q.00 DI. head drywall nail N S Flat, Ring, Dome, FRH 22 2 (4mm) 62 mm (4-/2) T Flash Galv. or Greater R Retail packaging P..086 T Full Length Step Ring 2 2 /4 (6mm) 6 20mm (4-/4) U Stainless Stl. AISA-6 S FRH-Strip, plastic collation R U Bugle, Smooth FRH 24 2 (60mm) 64 2mm (4-) X Hot Dip Galv. 0 Micron T FRH, 20 paper tape collation S..082 V Bugle, Ring FRH 2 2 /2 (6mm) 6 0mm (-) Z Bronze U Coil, inverted con. wnd., angular, plastic collation T 6.8 W L-head Cleat Flooring Nail 26 2 /4 (0mm) 66 mm (-/6) V Coil, con. wnd., angular, wire collation U X Med. Head Brad 2 (6mm) 6 40mm (4-/2) W Con. wnd., straight wire collation, 8.2mm spacing W..22 Y Slight Head Brad 68 4mm (-/4) X Three-quarter strip length Z Special Fast. Z Headless Pin 29 /2 (90mm) 69 0mm (6) Y Coil, Inverted con. wnd., straight plastic collation..0 Flat, / Ring 0 2 (66mm) 0 60mm (6-/2) Z Coil, con. wnd., straight wire. & 6.mm spacing Flat, / Screw 4 (02mm) 4 2 (mm) Finish nail alternate angle collation..04 Dome, Smooth, O/S 2 4 /4 (08mm) 8 8mm (-/6) 4 FRH nail, plastic collation 9 9mm (-/4) 4 Dome, Ring O/S Offset FRH, Smooth 6 Offset FRH, Ring FRH = Full Round Head O/S = Oversize Head U/S = Undersize Head 28 /4 (82mm) 4 /2 (4mm) 4 (2mm) Example: KC2APB K =." C = Flathead, Smooth Shank 2 = nail A = Diamond Point P = Bright Basic, Standard Tensile B = Sencoted 0

28 FASTENERS FASTENERS 6GA 6GA 20 8 GA Finish Nails Straight Strip M (2d).06 ¾_ M0000 A40009 (2d) (d) (4d) (d) (6d) (8d) _ Finish Nails Angled Strip M00002 A4029 ¼ RHEAA ¼ M0000 A4009 F-6S ½ RHEAA FinishPro 2 M00004 A409 ¾ RH9EAA M0000 A F-6A FinishPro Mg GT6RHA RH2EAA 2_ M0000 A ½ (d) (4d) (d) (6d) (8d) AZ08 ½ Brad Nails Headless & Slight Head ¾ AZ = headless brad AY = slight-headed brad 2_ RH2EAA 2½ F-8, SLP20XP LS FinishPro 2XP /2 AZ /4 AZ AY0 AY /4 AY _ SENCO 6 Ga. Straight Strip Finish Nails Furniture and cabinets, molding and trim, baseboard, chair rail, window casings and upholstery trim panels Length Item Code Count Head Point Finish Coating Package ¾ M M T-head Chisel Galv Sencote M M T-head Chisel Galv Sencote Plastic ¼ M M T-head Chisel Galv Sencote Plastic ½ M M T-head Chisel Galv Sencote Plastic ¾ M M T-head Chisel Galv Sencote Plastic 2 M M T-head Chisel Galv Sencote Plastic 2½ M M T-head Chisel Galv Sencote Plastic A M T-head Chisel Galv Plain Clamshell ¼ A4029.2M T-head Chisel Galv Plain Clamshell ½ A M T-head Chisel Galv Plain Clamshell ¾ A409 0.M T-head Chisel Galv Plain Clamshell 2 A M T-head Chisel Galv Plain Clamshell 2½ A M T-head Chisel Galv Plain Clamshell Variety *A M T-head Chisel Galv Plain Clamshell ½ M0000GR 0.M T-head Chisel Stainless Plain 2 M0000GR 0.M T-head Chisel Stainless Plain 2½ M0000GR 0.M T-head Chisel Stainless Plain *packs contain assorted ¼, ½, 2, 2½ nails. 6 ga. Stright Strip 6 ga 200 Angled Strip SENCO 6 Ga. 20 Angled Strip Finish Nails* Length Item Code Count Head Point Finish Coating Package ¼ RHEAA 2.M T-head Chisel Galv Sencote Plastic ½ RHEAA 2.M T-head Chisel Galv Sencote Plastic ¾ RH9EAA 2.M T-head Chisel Galv Sencote Plastic 2 RH2EAA 2.M T-head Chisel Galv Sencote Plastic 2½ RH2EAA 2.M T-head Chisel Galv Sencote Plastic *NOTE: ONLY Fits 6 Gauge 20-Degree Finish Nailers SENCO 8 Ga. Brad Nails Cabinets, decorative trim, picture frames and ornamentals Length Item Code Count Head Finish Coating Package ½ AZ08EAA.M Headless Galv Plain ¾ AZEAA.M Headless Galv Plain AZEAA.M Headless Galv Plain 8 AY0EAA.M Slight Galv Plain ¾ AYEAA.M Slight Galv Plain AYEAA.M Slight Galv Plain 8 GA 2GA 2GA Brad Nails Straight Strip AX0 FinishPro 2N SLP20XP FinishPro 8 Combo Kit F-8 FinishPro 8Mg FinishPro 2XP A Variety Pack A Variety Pack AX /4 AX _ AX = medium-headed brad FinishPro2SXP FinishPro2LXP FinishPro 0 Combo Kit FinishPro0 FinishPro A09809 Variety Pack A09909 Variety Pack /2 AX /4 Medium Head Pins Straight Strip Headless Pins Straight Strip ZX0 AX ZX /4 AX8 /2 /4 FinishPro 2LXP /4 2 Ga. Micro Pins, Straight Strip ZX AX9 ZX6 AX2 ¼ 2_ ZX8 ½_ AX22 2 ZX2 2_ 2_ SENCO 8 Ga. Brad Nails Cabinets, decorative trim, picture frames and ornamentals Length Item Code Count Head Finish Coating Package 8 AX0EAA.M Medium Galv Plain ¾ AXEAA.M Medium Galv Plain AXEAA.M Medium Galv Plain ¼ AXEAA.M Medium Galv Plain ½ AXEAA.M Medium Galv Plain 8 AX8EAA.M Medium Galv Plain ¾ AX9EAA.M Medium Galv Plain 2 AX2EAAN.M Medium Galv Plain 2 8 AX22EAAN.M Medium Galv Plain A20009.M Medium Galv Plain Clamshell ¼ A2029.M Medium Galv Plain Clamshell ½ A M Medium Galv Plain Clamshell 2 A M Medium Galv Plain Clamshell 8--¼ A M Medium Galv Plain Clamshell* -2 A M Medium Galv Plain Clamshell* AXEGAR.M Medium Stainless Plain Clamshell ¼ AXEGAR.M Medium Stainless Plain Clamshell ½ AXEGAR.M Medium Stainless Plain Clamshell 2 AX2EGAR.M Medium Stainless Plain Clamshell SENCO 2 Ga. Medium Head Pins The 2 gauge pins offer significant holding power while leaving a much smaller indent than an 8 gauge brad. Length Item Code Count Head Finish Coating Package 8 ZX0EAA.M Medium Galv Plain ¾ ZXEAA.M Medium Galv Plain ZXEAA.M Medium Galv Plain 8 ZX6EAA.M Medium Galv Plain 8 ZX8EAA.M Medium Galv Plain 2 ZX2EAA.M Medium Galv Plain 8 ZX0EAANR.M Medium Galv Plain Clamshell ¾ ZXEAANR.M Medium Galv Plain Clamshell ZXEAANR.M Medium Galv Plain Clamshell 8 ZX6EAANR.M Medium Galv Plain Clamshell 8 ZX8EAANR 0.8M Medium Galv Plain Clamshell 2 ZX2EAANR 0.8M Medium Galv Plain Clamshell SENCO 2 Ga. Headless Pins Pins fasten the smallest of trim securely leaving a nearly invisible hole. Length Item Code Count Head Finish Coating Package ½ CZ08EAAN.M Headless Galv Plain 8 CZ0EAAN.M Headless Galv Plain ¾ CZEAAN.M Headless Galv Plain ½ A M Headless Galv Plain Clamshell 8 A M Headless Galv Plain Clamshell ¾ A M Headless Galv Plain Clamshell A M Headless Galv Plain Clamshell ¼ A M Headless Galv Plain Clamshell 8 A09 2.6M Headless Galv Plain Clamshell ½ A M Headless Galv Plain Clamshell 2 A M Headless Galv Plain Clamshell ½- A M Headless Galv Plain Clamshell* -2 A M Headless Galv Plain Clamshell* * Variety pack 2

29 FASTENERS 4 4 Framing Nails Paper Taped Smooth Shank Framing Nails Paper Taped Ring Shank FASTENERS FP2XP, FP60 SN90XP SN9XP (6d) (d) (8d) (8d) (0d) GC2 GC2 GC24 GC2 HC2 2_ 2 /4 2 2 /2 FP60 FP2XP, SN90XP _ SN9XP (0d) (2d) (2d) (6d) (6d)..20..,.. KC2 HC28 KC28 KC29, LC29 KC SENCO 4 Smooth Shank Paper Taped Collated Nails Framing, sheathing, subfloor, decks, trusses and pallets Length Item Code Count Point Finish Coating 2¼ x. GC2AHAK.0M Diamond Bt. Hardened Plain 2 x. GC2APBX 2.M Diamond Bright Sencote 2¼ x. GC2APBX 2.M Diamond Bright Sencote 2 8 x. GC24APBX 2.M Diamond Bright Sencote 2½ x. GC2APBX 2.M Diamond Bright Sencote x.20 HC2APBX 2.M Diamond Bright Sencote ¼ x.20 HC28APBX 2.M Diamond Bright Sencote x. KC2APBX 2.M Diamond Bright Sencote ¼ x. KC28APBX 2.M Diamond Bright Sencote ½ x. KC29APBX 2.M Diamond Bright Sencote ½ x. LC29APBK 2.M Diamond Bright Sencote 4 x. KCAPBX 2.M Diamond Bright Sencote 2½ x. GC2AABX 2.M Diamond Galv Sencote 2 8 x. GC24ASBX 2.M Diamond Hot Dip Sencote x.20 HC2ASBX 2.M Diamond Hot Dip Sencote x. KC2ASBX 2.M Diamond Hot Dip Sencote ¼ x. KC28ASBX 2.M Diamond Hot Dip Sencote ½ x. KC29ASBX 2.M Diamond Hot Dip Sencote x. KC2AGBK.M Diamond Stainless Sencote Wood to masonry hardened nail GC2AHAK (d). 4 GE2 (6d) (8d) (0d) _ FP2XP, FP60, SN90XP GE24 2 SN9XP HE2 _ Framing Nails Paper Taped Screw Shank FP2XP, FP60, SN90XP, SN9XP (0d).20 SENCO 4 Ring Shank Paper Taped Collated Nails HF2 Framing, sheathing, subfloor, decks, trusses and pallets Length Item Code Count Point Finish Coating 2 x. GE2APAX 2.M Diamond Bright Plain 2 8 x. GE24APBX 2.M Diamond Bright Sencote 2 x. GE2ASBX 2.M Diamond Hot Dip Sencote 2 8 x. GE24ASBX 2.M Diamond Hot Dip Sencote x.20 HE2ASBX 2.M Diamond Hot Dip Sencote 2 8 x. GE24AGBK.M Diamond Stainless Sencote 2 /4 SENCO 4 Screw Shank Paper Taped Collated Nails Framing, sheathing, subfloor, decks, trusses and pallets Length Item Code Count Point Finish Coating x.20 HF2EPAK.M Chisel Bright Plain x.20 HF2EDB.M Chisel Exterior Sencote x.20 HF2AGBK.M Diamond Stainless Sencote _ /4 /4 /2 4_ 4

30 GA GA GA GA GA 8GA 2 20 GA 4 0 Framing Nails ProHead Smooth & Ring Shank Paper Taped 4 FASTENERS SENCO s offset full round head nail. This design allows round ProHead nails to be collated in a nested shank-to-shank 4 strip PROHEAD and Benefits Superior holding power. ProHead is a uniquely engineered fastener with a robust head configuration that beats competitors offset full round head in head pull through testing. Fewer partial-drives. Sencote is a proprietary coating that acts as a lubricant to ensure more fully completed drives. Less pull-outs. Sencote is also an adhesive, scoring SENCO fasteners one of the highest withdrawal values in the industry. Superior strip integrity. SENCO uses processes that yield clean wire, producing nail strips that have superior tape adhesion for high humidity environments. Proudly manufactured in Cincinnati, Ohio. Diameter..." thru." Shank...Smooth & Ring Length...2 thru ½ (0mm-90mm) Point...Diamond Finish...Bright Basic & Hot Dipped Coating...Sencote Collation paper tape strip Fits SN90XP SN9XP FramePro 0XP FramePro XP FramePro 60 FramePro 2XP FP2XP, SN90XP SN9XP FP60, FP0XP, FPXP (2d) (8d) (0d) (0d) (0d) (2d) (6d) G2 G24 H2 K2 K2 K28 K /4 /2 FP2XP, SN90XP SN9XP FP60, FP0XP, FPXP (6d) (8d) (0d) (0d) (2d) (2d) G62 G624 H62 K62 K628 K ½ _ SENCO ProHead Smooth Paper Taped Nails Framing, sheathing, subfloor, decks, trusses and pallets Length Item Code Count Point Finish Coating x.20 H2APBXR 0.M Diamond Bright Sencote x. K2APBXR 0.M Diamond Bright Sencote ¼ x. K28APBXR 0.M Diamond Bright Sencote x. K2ASBXR 0.M Diamond Hot Dip Sencote ¼ x. K28ASBXR 0.M Diamond Hot Dip Sencote 2 x. G2APBXN 2.M Diamond Bright Sencote 2 8 x. G24APBXN 2.M Diamond Bright Sencote x.20 H2APBXN 2.M Diamond Bright Sencote 2½ x. K2APBXN 2.M Diamond Bright Sencote x. K2APBXN 2.M Diamond Bright Sencote ¼ x. K28APBXN 2.M Diamond Bright Sencote ½ x. K29APBXN 2.M Diamond Bright Sencote 2 x. G2ASBXN 2.M Diamond Hot Dip Sencote 2 8 x. G24ASBXN 2.M Diamond Hot Dip Sencote x.20 H2ASBXN 2.M Diamond Hot Dip Sencote x. K2ASBXN 2.M Diamond Hot Dip Sencote ¼ x. K28ASBXN 2.M Diamond Hot Dip Sencote ½ x. K29ASBXN 2.M Diamond Hot Dip Sencote SENCO ProHead Ring Paper Taped Nails Framing, sheathing, subfloor, decks, trusses and pallets Length Item Code Count Point Finish Coating 2 8 x. G624ASBXNR 0.M Diamond Hot Dip Sencote x.20 H62ASBXNR 0.M Diamond Hot Dip Sencote 2 x. G62APBXN 2.M Diamond Bright Sencote 2 8 x. G624APBXN 2.M Diamond Bright Sencote x.20 H62APBXN 2.M Diamond Bright Sencote ¼ x. K628APBXN 2.M Diamond Bright Sencote 2 x. G62ASBXN 2.M Diamond Hot Dip Sencote 2 8 x. G624ASBXN 2.M Diamond Hot Dip Sencote x.20 H62ASBXN 2.M Diamond Hot Dip Sencote x. K62ASBXN 2.M Diamond Hot Dip Sencote ¼ x. K628ASBXN 2.M Diamond Hot Dip Sencote ½ x. K629ASBXN 2.M Diamond Hot Dip Sencote Note: Fits FramePro60 released 202 /4 /2 Scan to learn more You can also enter this link in your web browser: click on Videos/Senco s 6

31 FASTENERS FASTENERS 4 Metal Connector 20 Framing Nails Full Round Head Smooth Shank 20 KJ M00226 BB, M Galv. ½ _ JoistPro0 JoistPro ,.48 ½ _ MD ½ _ HN0..48 MD, M00226 BB, M Galv. ½ _ KJ ½_ KJ2, MD2 2½_ HN20.48 MD2, M00226 BB, M Galv. 2½_ SN60MC..48 MD ½_ ND2 2½_ M00226 BB, M ½_ MD SENCO 4 Heat Treated Metal Connector Nails Joist hangers, foundation anchors, seismic and hurricane straps and ties. Length Item Code Count Point Finish Coating Collation ½ x. KJAHBD 2.M Diamond Bright Plain 4 Paper Tape, Strip ½ x.48 MDAHBD 2.M Diamond Bright Plain 4 Paper Tape, Strip 2½ x. KJ2AHBD 2.M Diamond Bright Plain 4 Paper Tape, Strip 2½ x.48 MD2AHBD.M Diamond Bright Plain 4 Paper Tape, Strip 2½ x.62 ND2AHBD.2M Diamond Bright Plain 4 Paper Tape, Strip ½ x. KJAEBD 2.M Diamond Hot Dip Plain 4 Paper Tape, Strip ½ x.48 MDAEBD 2.M Diamond Hot Dip Plain 4 Paper Tape, Strip 2½ x. KJ2AEBD 2.M Diamond Hot Dip Plain 4 Paper Tape, Strip 2½ x.48 MD2AEBD.M Diamond Hot Dip Plain 4 Paper Tape, Strip 2½ x.62 ND2AEBD.2M Diamond Hot Dip Plain 4 Paper Tape, Strip SENCO 4 Non-Heat Treated Metal Connector Nails Joist hangers, foundation anchors, seismic and hurricane straps and ties, standard tensile, non-hardened nails. Length Item Code Count Point Finish Coating Collation ½ x. M M Diamond Bright Plain 4 Paper Tape, Strip ½ x.48 M M Diamond Bright Plain 4 Paper Tape, Strip 2½ x.48 M00226.M Diamond Bright Plain 4 Paper Tape, Strip 2½ x.62 M M Diamond Bright Plain 4 Paper Tape, Strip ½ x. M M Diamond Hot Dip Plain 4 Paper Tape, Strip ½ x.48 M M Diamond Hot Dip Plain 4 Paper Tape, Strip 2½ x.48 M M Diamond Hot Dip Plain 4 Paper Tape, Strip 2½ x.62 M M Diamond Hot Dip Plain 4 Paper Tape, Strip SENCO 20 Non-Heat Treated Metal Connector Nails Joist hangers, foundation anchors, seismic and hurricane straps and ties, standard tensile, non-hardened nails, Length Item Code Count Point Finish Coating Collation ½ x.48 MDAPAT 2.M Diamond Bright Plain 20 Paper Tape, Strip 2½ x.48 MD2APBT 2.M Diamond Bright Plain 20 Paper Tape, Strip ½ x.48 MDASAT 2.M Diamond Hot Dip Plain 20 Paper Tape, Strip 2½ x.48 MD2ASBT 2.M Diamond Hot Dip Plain 20 Paper Tape, Strip GD2 KD28 (6d) (d) (8d) (8d) (8d) (0d) (0d) _ (2d). GD2 FP2FRHXP SN902XP /4 2 /4 KD29 (6d). MD2 GD24 2 FP602 (0d).48 2 /4 SN92XP FP2FRHXP, FP602, SN902XP MD2 GD2 2 /2 FP2FRHXP SN902XP SN92XP (0d).48 _ MD28 KD2 2 /2 (2d).48 /4 M0020 HD2 (6d).62 _ KD2 Roof Tile Nail Oversize Head HJ2* (0d).20 2 /2 HD28 (2d).20 /4 SENCO 20 Smooth Shank Plastic Collated Nails Framing, sheathing, subfloor, decks, trusses and pallets Length Item Code Count Point Finish Coating x. KD2APBSR 0.M Diamond Bright Sencote ¼ x. KD28APBSR 0.M Diamond Bright Sencote x. KD2ASBSR 0.M Diamond Hot Dip Sencote ¼ x. KD28ASBSR 0.M Diamond Hot Dip Sencote 2¼ x. GD2AHAS 2.8M Diamond Bt. Hardened Plain 2 x. GD2APBSN.M Diamond Bright Sencote 2¼ x.48 MD2APBSN 4.M Diamond Bright Sencote 2 8 x. M M Diamond Bright Sencote 2 8 x. GD24APBSN.M Diamond Bright Sencote 2½ x. GD2APBSN.M Diamond Bright Sencote 2½ x. KD2APBSN 4.M Diamond Bright Sencote 2½ x. M M Diamond Bright Sencote x.20 HD2APBSN 4.M Diamond Bright Sencote x. KD2APBSN 4.M Diamond Bright Sencote x. KD2APBSR 0.M Diamond Bright Sencote x.48 MD2APBSN 4.M Diamond Bright Sencote x.48 M M Diamond Bright Sencote ¼ x.20 HD28APBSN 4.M Diamond Bright Sencote ¼ x. KD28APBSN 4.M Diamond Bright Sencote ¼ x. KD28APBSR 0.M Diamond Bright Sencote ¼ x.48 MD28APBSN 4.M Diamond Bright Sencote ½ x. KD29APBSN 4.M Diamond Bright Sencote ½ x. M M Diamond Bright Sencote 2½ x. GD2AABSN.M Diamond Galv Sencote 2½ x.20 HJ2ADBS* 2.M Diamond Exterior Sencote 2½ x. KD2AABS 2.M Diamond Galv Sencote x. KD2ASBS 2.M Diamond Hot Dip Sencote x. KD2ASBSR 0.M Diamond Hot Dip Sencote x. KD2AABSN 4.M Diamond Galv Sencote ¼ x. KD28ASBS 2.M Diamond Hot Dip Sencote ¼ x. KD28ASBSR 0.M Diamond Hot Dip Sencote ¼ x. KD28AABSN 4.M Diamond Galv Sencote ½ x. KD29ASBS 2.M Diamond Hot Dip Sencote ½ x. KD29AABSN 4.M Diamond Galv Sencote ¼ x. KD28AGBS.M Diamond Stainless Sencote * Roof tile nails, drive with the FramePro 2XP or SN92XP Full Round Head Strip Nails /2 /2 2½_ 8 9

32 FASTENERS FASTENERS 20 Framing Nails Full Round Head Ring Shank Framing Nails Smooth & Ring Shank SN92XP FP2FRHXP, FP602, SN902XP (6d) (8d) (0d)...20 GL2 GL24 HL2 2_ 2 SENCO 20 Ring Shank Plastic Collated Nails Framing, sheathing, subfloor, decks, trusses, and pallets Length Item Code Count Point Finish Coating 2 8 x. GL24ASBSR 0.M Diamond Hot Dip Sencote 2 x. GL2APBSN.M Diamond Bright Sencote 2 8 x. GL24APBSN.M Diamond Bright Sencote 2 8 x. M M Diamond Bright Sencote 2 x. GL2ASBS 2.M Diamond Hot Dip Sencote 2 8 x. GL24AABSN.M Diamond Galv Sencote 2 8 x. M M Diamond Galv Sencote 2 8 x. GL24ASBS 2.M Diamond Hot Dip Sencote x.20 HL2AABSN 4.M Diamond Galv Sencote x.20 HL2ASBS 2.M Diamond Hot Dip Sencote 2 8 x. GL24AGBS.M Diamond Stainless Sencote x.20 HL2AGBS.M Diamond Stainless Sencote SCN49 SCN60XP PAL0 PAL00 SCN6XP (6d) (8d) (8d) (8d) (0d) (2d) (0d) (2d) (6d) GD2 GD24 GD2 KD2 HD2 HD28 KD2 KD28 KD29 MD 2_ 2 2 /2 2 /2 SENCO Smooth Shank Framing Coil Nails Framing, sheathing, pallets, subfloor, decks and trusses Length Item Code Count Point Finish Coating Collation 2 x. GD2APBF 6.M Diamond Bright Sencote Angular, flat wire wound 2 8 x. GD24APBF 6.M Diamond Bright Sencote Angular, flat wire wound 2½ x. GD2APBF 6.M Diamond Bright Sencote Angular, flat wire wound 2½ x. KD2APBF.6M Diamond Bright Sencote Angular, flat wire wound x.20 HD2APBF 4.M Diamond Bright Sencote Angular, flat wire wound x. KD2APBF.6M Diamond Bright Sencote Angular, flat wire wound x. M M Diamond Bright Sencote Angular, flat wire wound ¼ x.20 HD28APBF 4.M Diamond Bright Sencote Angular, flat wire wound ¼ x. KD28APBF.6M Diamond Bright Sencote Angular, flat wire wound ¼ x. M M Diamond Bright Sencote Angular, flat wire wound ½ x. KD29APBF.6M Diamond Bright Sencote Angular, flat wire wound x.48 MD4APBF.8M Diamond Bright Sencote Angular, flat wire wound 2 x. GD2AABF 6.M Diamond Galv Sencote Angular, flat wire wound 2½ x. GD2AABF 6.M Diamond Galv Sencote Angular, flat wire wound x. KD2AABF.6M Diamond Galv Sencote Angular, flat wire wound x. KD2ASBF 2.4M Diamond Hot Dip Sencote Angular, flat wire wound ¼ x. KD28AABF.6M Diamond Galv Sencote Angular, flat wire wound ¼ x. KD28ASBF 2.4M Diamond Hot Dip Sencote Angular, flat wire wound / 4 /4 Flooring Nails Full Round Head Ring Shank SENCO s BT2APBF Coil Flooring Nails Superior fastening in floor applications. Ideal for use in SENCO s SCN60XP nailer Patented unique ring shank design reduces the potential of the nail backing out - address one of the most common flooring problems. The BT2APBF has been tested and proven under actual conditions - is preferred. Expect to not experience squeaky floors, uneven surfaces, raised fasteners and minimize problems and call-backs. : Full Ring Shank Coil Nail:.099" x 2¼ BT (.099) Item Code Diameter Wound/Shank Length Point Finish Coating M/ Wt/ BT2APBF.099 Coil, angular, flat wound 2 Diamond Bright Basic. Sencote Unique ring shank design lbs 2 /2 PAL0 PAL00 SCN60XP, SCN49 SCN6XP (6d) (6d) (d) (6d) (8d) (0d) BL2 BT2 BE2, BL2 GL2 GL24 HL2 2_ 2_ 2_ 2 /4_ 2 _ SENCO Ring Shank Framing Coil Nails Framing, sheathing, pallets, subfloor, decks and trusses Length Item Code Count Point Finish Coating Collation 2 x.099 BL2APBF 6.6M Diamond Bright Sencote Angular, flat wire wound 2 x.099 BT2APBF 6.6M Diamond Bright Sencote Angular, flat wire wound 2 x. GL2APBF 6.M Diamond Bright Sencote Angular, flat wire wound 2¼ x.099 BL2APBF 6.6M Diamond Bright Sencote Angular, flat wire wound 2 8 x. GL24APBF 6.M Diamond Bright Sencote Angular, flat wire wound 2¼ x.099 BE2AABF 6.6M Diamond Galv Sencote Angular, flat wire wound 2 8 x. GL24AABF 6.M Diamond Galv Sencote Angular, flat wire wound 2 8 x. GL24ASBF 2.M Diamond Hot Dip Sencote Angular, flat wire wound x.20 HL2AABF.6M Diamond Galv Sencote Angular, flat wire wound x.20 HL2ASBF 2.4M Diamond Hot Dip Sencote Angular, flat wire wound 2 8 x. GL24AGBF 2.M Diamond Stainless Sencote Angular, flat wire wound x.20 HL2AGBF 2.4M Diamond Stainless Sencote Angular, flat wire wound Wire Weld Coil Nails 60 6

33 FASTENERS Framing Nails Packaging, Siding Screw, Duplex Shanks & Wood to Masonry Smooth Shank Smooth & Ring Shank BK2 SCN49 SCN60XP SCN6XP PAL00 PAL0 (6d) (d) (8d) (0d) BK2 BK2 HK2 SENCO Screw Shank Framing Coil Nails Framing, sheathing, pallets, subfloor, decks and trusses Length Item Code Count Point Finish Coating Collation 2 x.099 BK2BPBFN 9.M Blunt Dia. Bright Sencote Angular, flat wire wound 2 x.099 BK2EPBF 6.6M Chisel Bright Sencote Angular, flat wire wound 2¼ x.099 BK2BPBFN 9.M Blunt Dia. Bright Sencote Angular, flat wire wound 2¼ x.099 BK2EPBF 6.6M Chisel Bright Sencote Angular, flat wire wound 2½ x.099 BK2BPBFN 6.M Blunt Dia. Bright Sencote Angular, flat wire wound x.20 HK2APBFN 4.M Diamond Bright Sencote Angular, flat wire wound (d) (6d) ED9 /4 SCN49, PALF ED2, EJ2 (d).092 ED2, EJ2 SENCO Smooth Shank-Packaging and Siding Coil Nails Packaging, siding, fencing, pallets and underlayment Length Item Code Count Point Finish Coating Collation FASTENERS ¾ x.092 ED9ASBC.6M Diamond Hot Dip Sencote Angular plastic carrier strip wound 2 x.092 ED2AABH.6M Diamond Galv Sencote Angular, flat wire wound 2 x.092 ED2ADBH.6M Diamond Exterior Sencote Angular, flat wire wound 2 x.092 EJ2ADBC 6.4M Diamond Exterior Sencote Angular plastic carrier strip wound 2 x.092 EJ2ADBH.2M Diamond Exterior Sencote Angular, flat wire wound 2¼ x.092 ED2AABH.6M Diamond Galv Sencote Angular, flat wire wound 2¼ x.092 ED2ADBH.6M Diamond Exterior Sencote Angular, flat wire wound 2¼ x.092 ED2ASBC.6M Diamond Hot Dip Sencote Angular plastic carrier strip wound 2¼ x.092 EJ2ADBH.2M Diamond Exterior Sencote Angular, conical wire wound 2¼ x.092 EJ2ASBC.6M Diamond Hot Dip Sencote Angular plastic carrier strip wound 2 M000 / /4 SCN6XP.099 M /4 2 /2 HR22* SCN60XP Modified* (0d) (0d) HR4* SENCO Smooth Shank Stiff Stock Coil Nails Wood to masonry Length Item Code Count Point Finish Coating Collation ½ x.099 M000.M Diamond Bright Sencote Angular, flat wire wound 2¼ x.099 M0002.M Diamond Bright Sencote Angular, flat wire wound SENCO Duplex Smooth Shank Coil Nails Framing, trusses, crating and concrete forms Length Item Code Count Point Finish Coating Collation 2 8 x.20 HR22APAF.4M Diamond Bright Plain Angular, flat wire wound 2 8 x.20 HR4APAF.6M Diamond Bright Plain Angular, flat wire wound *Requires a special order modified SCN60XP Tool (order XA9) SE /4 SCN49, PALF (d) (4d) (d) (d) (6d) (d) (d) SE /2 SE9 /4 EL9 /4 EL20 EL2 Drywall Nails Ring Shank 2 2 /4 EL2 2 /4 SENCO Ring Shank-Packaging and Siding Coil Nails Packaging, siding, fencing, wood shingles, crating and pallets Length Item Code Count Point Finish Coating Collation ¼ x.082 SEAPB.M Diamond Bright Sencote Angular, conical wire wound ¼ x.082 SEAPBH 4.M Diamond Bright Sencote Angular, flat wire wound ½ x.082 SEAPB 2.M Diamond Bright Sencote Angular, conical wire wound ½ x.082 SEAPBH.2M Diamond Bright Sencote Angular, flat wire wound ¾ x.082 SE9APB 2.M Diamond Bright Sencote Angular, conical wire wound ¾ x.082 SE9APBH.2M Diamond Bright Sencote Angular, flat wire wound ½ x.092 ELADBH 9.M Diamond Exterior Sencote Angular, flat wire wound ¾ x.092 EL9ASBC.6M Diamond Hot Dip Sencote Angular plastic carrier strip wound ¾ x.092 EL9ASBH.6M Diamond Hot Dip Sencote Angular, flat wire wound 8 x.092 EL20AABH.6M Diamond Galv Sencote Angular, flat wire wound 8 x.092 EL20ASBH.6M Diamond Hot Dip Sencote Angular, flat wire wound 2 x.092 EL2ASBH.6M Diamond Hot Dip Sencote Angular, flat wire wound 2¼ x.092 EL2AABH.6M Diamond Galv Sencote Angular, flat wire wound 2¼ x.092 EL2ASBC.6M Diamond Hot Dip Sencote Angular plastic carrier strip wound 2¼ x.092 EL2ASBH.6M Diamond Hot Dip Sencote Angular, flat wire wound ¾ x.092 EL9AGBH.6M Diamond Stainless Sencote Angular, flat wire wound 8 x.092 EL20AGBH.6M Diamond Stainless Sencote Angular, flat wire wound 2 x.092 EL2AGBH.6M Diamond Stainless Sencote Angular, flat wire wound 2¼ x.092 EL2AGBH.6M Diamond Stainless Sencote Angular, flat wire wound SCN40DW (4d) (d) SENCO Drywall Ring Shank Bugle Head Coil Nails BG BG8 Length Item Code Count Point Finish Coating Collation ½ x.099 BGAAA 9.6M Diamond Galv Plain Angular, conical wire wound ½ x.099 BGAAAQ 6.4M Diamond Galv Plain Angular, conical wire wound 8 x.099 BG8AAA 9.6M Diamond Galv Plain Angular, conical wire wound 8 x.099 BG8AAAQ 6.4M Diamond Galv Plain Angular, conical wire wound 2 8 ½

34 FASTENERS FASTENERS Plastic Carrier Fine Wire Staples Strip Smooth and Ring Siding Nails 22 GA SENCO s hot-dipped, full round head, plastic carrier strip coil siding nails eliminate the wire flagging that may occur with wire collated siding nails. By using Plastic Carrier Strip Nails you eliminate wire flagging, improve the overall appearance of your work, reduce the risk of rust, stains and improve the application of paints and sealants. Our hot-dipped galvanization meets or exceeds ASTM A Class D, the accepted and code-specified standard for hot-dipped galvanization. These nails may be used with pressure treated lumber, including ACQ. ¾ 2¼ ED (.092) (.28) 2 2¼ EL (.092) EJ (.092) (.28) (.2) M000 M0002 Roofing Nails Smooth Shank M000 RoofPro40 / 4XP (d) (2d) (d) /4 : Plastic Carrier Strip Coil Nails: ¾" 2¼ Item Code Diameter Wound/Shank/Head Length Point Finish Coating M/ Wt/ /Skid UPC Code ED9ASBC.092 Flat., Smooth FRH (.28) ¾ Diamond Hot Dip Galv. Sencote Plastic Carrier Strip, Coil.6 4 lbs ED2ASBC.092 Flat., Smooth FRH (.28) 2¼ Diamond Hot Dip Galv. Sencote Plastic Carrier Strip, Coil.6 lbs EJ2ASBC.092 Flat., Smooth, Oversize FRH (.2) 2 Diamond Hot Dip Galv. Sencote Plastic Carrier Strip, Coil.6 lbs EJ2ASBC.092 Flat., Smooth, Oversize FRH (.2) 2¼ Diamond Hot Dip Galv. Sencote Plastic Carrier Strip, Coil.6 lbs EL9ASBC.092 Flat., Ring, FRH (.28) ¾ Diamond Hot Dip Galv. Sencote Plastic Carrier Strip, Coil.6 4 lbs EL2ASBC.092 Flat., Ring, FRH (.28) 2¼ Diamond Hot Dip Galv. Sencote Plastic Carrier Strip, Coil.6 lbs These nails are primarily intended for siding, fencing, light pallets, packaging and crating. and Benefits No flagging or wire fragments under the nail head results in no rust stains or cut fingers from sharp wire Hot-dipped galvanization provides excellent corrosion resistance M0004 /4 M000 (4d).20 /2 (d).20 M0006 /4 Also Fits: SENCO: SCN6, HITACHI : NV6AH, NVAG SENCO Smooth Shank Roofing Coil Nails Asphalt & fiberglass shingles, siding and vapor barriers Length Item Code Count Point Finish Coating Collation ¾ x.20 M000.2M Diamond Galv Plain Angular, flat wire wound 8 x.20 M0002.2M Diamond Galv Plain Angular, flat wire wound x.20 M000.2M Diamond Galv Plain Angular, flat wire wound ¼ x.20 M0004.2M Diamond Galv. Plain Angular, flat wire wound ½ x.20 M000.2M Diamond Galv Plain Angular, flat wire wound ¾ x.20 M0006.2M Diamond Galv Plain Angular, flat wire wound ¾ Works best with SCN49 ¼" - 2½" Coil Nailer Item#: J000N See page 2 for tool specifications SENCO has a complete line of tools, fasteners, and compressors for all your roofing applications. 2¼ 2GA Crown: /6 (4.8mm) Width:.00 Thickness:.02 Gauge: 22 THICKNESS CROWN 4 8 Crown: /2 (2.mm) Width:.00 Thickness:.02 Gauge: 22 /2 C04 /4 /6 C0 Crown: (9.mm) Width:.00 Thickness:.02 Gauge: 22 4 B06 ½ C02 /6 /2 Crown: /6 (4.8mm) Width:.02 Thickness:.02 Gauge: 2 WIDTH LEG LENGTH B04 ½ SFW09 /6 SFT0XP-A/D A04 A06 A SFT0XP-B 6 SFT0XP-A/D D0 8 2 SFT0XP-C, SFW09 C0 SFT0XP-C, SFW09 C C0 W0 /6 B0 ½ B08 ½ /4 6 C06 C0 W /6 SENCO 22 Ga. /6" Crown Fine Wire Furniture upholstery, felt, insulation, casebacks, screening and shoes Length Item Code Count Point Finish Coating ¼ A04BAAN 0.M Chisel Galv Sencote 8 A06BABN 0.M Chisel Galv Sencote 8 A06BABP 40.M Chisel Galv Sencote ½ A08BAB 20.M Chisel Galv Sencote ½ A08BABP 0.M Chisel Galv Sencote 8 D0BABN 20.M Chisel Galv Sencote 8 D0BABPN 2.M Chisel Galv Sencote SENCO 22 Ga. /2" Crown Fine Wire Furniture upholstery, felt, insulation, casebacks, screening and shoes Length Item Code Count Point Finish Coating ¼ B04BAAPN 2.M Chisel Galv Plain 6 B0BAAP 4.M Chisel Galv Plain 6 B0DAA 4.M Outside Chisel Galv Plain 8 B06BAAP 40.M Chisel Galv Plain ½ B08BAAP 2.M Chisel Galv Plain SENCO 22 Ga. " Crown Fine Wire Furniture upholstery, felt, insulation, casebacks, screening and shoes Length Item Code Count Point Finish Coating 2 C02BAAPN 60.M Chisel Galv Plain 6 C0BAAPN.M Chisel Galv Plain ¼ C04BAAP.M Chisel Galv Plain 6 C0BAAPN 28.M Chisel Galv Plain 8 C06BAAP 0.M Chisel Galv Plain 6 C0BAAPN 40.M Chisel Galv Plain ½ C08BAAP.M Chisel Galv Plain 8 C0BAAP 2.M Chisel Galv Plain 6 C0BGAN 2.M Chisel Stainless Plain ¼ C04BGAN 2.M Chisel Stainless Plain 8 C06BHA 0.M Chisel Stainless* Plain 8 C06BGA 0.M Chisel Stainless Plain *Stainless Steel High Tensile AISI-04 SENCO 2 Ga. /6" Crown Fine Wire Cabinets, casebacks, soffits, molding & lattice Length Item Code Count Point Finish Coating 8 W0BAB 0.M Chisel Galv Sencote 4 WBABN 0.M Chisel Galv Sencote 64 6

35 FASTENERS FASTENERS 20GA 8GA Fine Wire Staples Crown: /6 (4.8mm) Width:.00 Thickness:.09 Gauge: 20 /6 Crown: /2 (2.mm) Width:.00 Thickness:.09 Gauge: 20 /4 G04 Crown: (9.mm) Width:.04 Thickness:.02 Gauge: 20 Crown: /6 (mm) Width:.00 Thickness:.09 Gauge: 20 F04 DFPXP Self-Clinching F0 F06 F08 ½ ½ ½ Crown: /6 (mm) Width:.0 Thickness:.02 Gauge: 8 G06 SFT0XP-F SFT0XP-G /2 /4 /2 G08 G0 SFT0-H A H06 FSXP, FLXP J06 J08 J0 /6 /2 /6 SFT0XP-E E06 E08 E0 6 /2 6 ½ /6 /6 6 SENCO 20 Ga. /6" Crown Fine Wire Furniture upholstery, felt, insulation, casebacks, screening and shoes Length Item Code Count Point Finish Coating 8 E06BAA 0.M Chisel Galv Plain ½ E08BAA 0.M Chisel Galv Plain 8 E0BAA.M Chisel Galv Plain SENCO 20 Ga. /2" Crown Fine Wire Upholstery, felt, insulation and casebacks, D Tool: Bedding, packaging and set-up boxes Length Item Code Count Point Finish Coating ¼ F04BAAN 0.M Chisel Galv Plain ¼ F04BAAP.M Chisel Galv Plain 6 F0BAAP 24.M Chisel Galv Plain 8 F06BAA 0.M Chisel Galv Plain 8 F06BAAP 24.M Chisel Galv Plain ½ F08BAAN 0.M Chisel Galv Plain ½ F08BAAP.M Chisel Galv Plain 8 F06BGA 0.M Chisel Stainless Plain ½ F08BGA 0.M Chisel Stainless Plain SENCO 20 Ga. " Crown Fine Wire Upholstery, felt, insulation and casebacks Length Item Code Count Point Finish Coating ¼ G04BAAN 0.M Chisel Galv Plain 8 G06BABN.M Chisel Galv Plain ½ G08BAB.M Chisel Galv Plain 8 G0BAB.M Chisel Galv Plain *Stainless Steel High Tensile AISI-04 SENCO 20 Ga. /6" Crown Fine Wire Insulation, vapor barriers & roofing felt Length Item Code Count Point Finish Coating 8 H06BAA.M Chisel Galv Plain SENCO 8 Ga. /6" Crown Fine Wire Packaging, joining materials to corrugated Length Item Code Count Point Finish Coating 8 J06BAA.M Chisel Galv Plain ½ J08BAAN.M Chisel Galv Plain 8 J0BAAN.M Chisel Galv Plain 9GA 8GA Medium Wire Staples /2 K08 /2 K0 /4 SLS20XP-K K K2 SLS20XP-HF K ¼ ¼ ¼ ¼ ¼ Crown: ¼ (6.4mm) Width:.04 Thickness:.00 Gauge: 9 SLS20XP-R R0 R R Crown: /6 (mm) /4 Width:.04 Thickness:.00 Gauge: 9 SKSXP-L SLS0Mg FinishPro 2N SLS8Mg, SLS20XP-L SLS2XP-L L06 L0 L08 L0 L ¼ ¼ ¼ ¼ ¼ /6 /2 /4 FinishPro 2N SKSXP-L, SLS0Mg, SLS8Mg, SLS20XP-L, SLS2XP-L L2 L L4 L L ¼ ¼ ¼ ¼ ¼ R08 6 Crown: /4 (6.4mm) Width:.00 Thickness:.044 Gauge: 8 /4 /2 SENCO 9 Ga. /4" Crown Medium Wire Cabinets, drawers, soffits, lattice, casebacks Length Item Code Count Point Finish Coating ½ K08BABN 0.M Chisel Galv Sencote 8 K0BABN 0.M Chisel Galv Sencote ¾ KBAB 0.M Chisel Galv Sencote 8 K2BAB.M Chisel Galv Sencote KBABN.M Chisel Galv Sencote SENCO 9 Ga. /6" Crown Medium Wire Hardwood flooring, cabinets, drawers, lattice Length Item Code Count Point Finish Coating ½ R08BAB.M Blunt Galv Sencote 8 R0BAB.M Blunt Galv Sencote ¾ RBAB.M Blunt Galv Sencote RBAB.M Blunt Galv Sencote SENCO 8 Ga. /4" Crown Medium Wire Cabinets,casebacks, drawers, upholstery, soffits, underlayment, lattice & insulative sheathing Length Item Code Count Point Finish Coating Package ¾ LBRB.M Chisel Bright Sencote LBRBN.M Chisel Bright Sencote LBRBP.M Chisel Bright Sencote 8 L4BRB.M Chisel Bright Sencote ¼ LBRB.M Chisel Bright Sencote 8 L06BAB 0.M Chisel Galv Sencote 6 L0BABP 24.M Chisel Galv Sencote 6 L0BQBP 24.M Chisel Class Galv Sencote ½ L08BABN.M Chisel Galv Sencote ½ L08BAB 0.M Chisel Galv Sencote 8 L0BABN.M Chisel Galv Sencote 8 L0HABN.M Cross Cut Chisel Galv Sencote ¾ LBAB.M Chisel Galv Sencote ¾ LHBB.M Cross Cut Chisel Galv* Sencote ¾ LHAB.M Cross Cut Chisel Galv Sencote 8 L2BAB.M Chisel Galv Sencote 8 L2BQB.M Chisel Class Galv Sencote LBABN.M Chisel Galv Sencote LHABN.M Cross Cut Chisel Galv Sencote 8 L4BAB.M Chisel Galv Sencote ¼ LBAB.M Chisel Galv Sencote ½ LBAB.M Chisel Galv Sencote 8 A M Chisel Galv Sencote Clamshell ¾ A8009.9M Chisel Galv Sencote Clamshell A M Chisel Galv Sencote Clamshell ¼ A8029.M Chisel Galv Sencote Clamshell ½ A8009.6M Chisel Galv Sencote Clamshell Variety A M Chisel Galv Sencote Clamshell The A variety packs contain 900 assorted /2, and -/2 8 gauge /4 crown staples. 8 L0BHA.M Chisel Stainless** Plain ¾ LBGA.M Chisel Stainless Plain 8 L4BGA.M Chisel Stainless Plain * Galv High Tensile **Stainless High Tensile AISI

36 FASTENERS FASTENERS 8GA Medium Wire Staples 6GA Heavy Wire Staples GA /4 M06 8 M2 8 /2 Crown: (9.mm) Width:.00 Thickness:.044 Gauge: 8 Crown: 6 (.mm) Width:.08 Thickness:.00 Gauge: O6 SLS20XP-M / SLS2XP-M M08 8 M Heavy Wire Staples O M0 SKSXP-M SLS20XP-M / SLS2XP-M 8 /4 8 M 8 /4 /2 SNS200XP, SNS200-XP-BST SNS4*, SNS44XP*, SNS4XP* O O /2 SKSXP-M /4 M 8 M 8 O9 6 SENCO 8 Ga. " Crown Medium Wire Cabinets, casebacks, drawers, upholstery, soffits, underlayment, lattice and sheathing Length Item Code Count Point Finish Coating 8 M0BRBN.M Chisel Bright Sencote ¾ MBRBN.M Chisel Bright Sencote MBRB.M Chisel Bright Sencote 8 M06BABN 0.M Chisel Galv Sencote ½ M08BAB 0.M Chisel Galv Sencote 8 M0BABN.M Chisel Galv Sencote ¾ MBABN.M Chisel Galv Sencote 8 M2BAB.M Chisel Galv Sencote MBAB.M Chisel Galv Sencote ¼ MBAB 0.M Chisel Galv Sencote ½ MBAB 0.M Chisel Galv Sencote SENCO Ga. /6" Crown Heavy Wire Furniture frames and crates Length Item Code Count Point Finish Coating Collation ¼ OBRBB 0.M Chisel Bright Sencote Glued 8 O6BRBB 0.M Chisel Bright Sencote Glued ½ OBRBB 0.M Chisel Bright Sencote Glued 8 O8BRBB 0.M Chisel Bright Sencote Glued 4 O9BRBB 0.M Chisel Bright Sencote Glued * Drives only from SNS44XP and SNS4XP staplers manufactured after 0/200, and SNS4 manufactured after 09/200. For older tools, order upgrade kits: SNS4-YK094, SNS44-YK09, SNS4-FA086 /2 /4 THICKNESS Note: N08 6 N N0 6 SKSXP-N Crown: 6 (.mm) Width:.062 Thickness:.0 Gauge: 6 /4 N 6 SNS4, SNS200XP, SNS200XP-BST SKSXP-N N2 N 6 N8 /4 SNS4, SNS200XP, SNS200XP-BST 6 N9 2 N4 6 N CROWN N6 WIDTH LEG LENGTH /2 Model numbers specify which tool or tools drive designated fasteners. N 6 Gauge /2 Crown staple fits: Paslode: Cordless 6 Gauge Standard Crown Stapler, Impulse 200-S6, 0-S6, 200-S6, 200-S6P, 200-S6, MA-S6L, S200-S6, PA-200, DeWalt: D4 Fasco: RC HD-40 VIL-SID, Spotnails: MS6-860, XS6-860, /2 M SENCO 6 Ga. /6" Crown Heavy Wire Cabinets, casebacks, drawers, upholstery, soffits, underlayment, lattice and sheathing Length Item Code Count Point Finish Coating Collation ¾ NBRB.M Chisel Bright Sencote Glued NBRB.M Chisel Bright Sencote Tape 8 N4BRB 0.M Chisel Bright Sencote Tape ¼ NBRB 0.M Chisel Bright Sencote Tape 8 N6BRB 0.M Chisel Bright Sencote Tape 8 N6RRB 0.M Step Bright Sencote Tape ½ NBRB 0.M Chisel Bright Sencote Tape 8 N8BRB 0.M Chisel Bright Sencote Tape ¾ N9BRB 0.M Chisel Bright Sencote Tape 2 N2BRB 0.M Chisel Bright Sencote Tape ½ N08BABN.M Chisel Class Galv Sencote Tape ½ N08BBBN.M Chisel Galv* Sencote Glued ½ N08FBB.M Divergent Galv* Sencote Glued 8 N0BAB.M Chisel Class Galv Sencote Glued ¾ NBAB.M Chisel Class Galv Sencote Glued ¾ NFBB.M Divergent Galv* Sencote Glued 8 N2BABN.M Chisel Class Galv Sencote Glued 8 N2FABN.M Divergent Class Galv Sencote Glued NBAB.M Chisel Class Galv Sencote Glued NFAB.M Divergent Class Galv Sencote Glued 8 N4BAB 0.M Chisel Class Galv Sencote Tape 8 N4FAB 0.M Divergent Class Galv Sencote Glued ¼ NBAB 0.M Chisel Class Galv Sencote Tape ¼ NFAB 0.M Divergent Class Galv Sencote Glued 8 N6BAB 0.M Chisel Class Galv Sencote Tape ½ NBAB 0.M Chisel Class Galv Sencote Tape ½ NBPE 0.M Chisel Reg. Galv Sencote Tape 8 N8BAB 0.M Chisel Class Galv Sencote Glued ¾ N9BAB 0.M Chisel Class Galv Sencote Tape ¾ N9BPE 0.M Chisel Reg. Galv Sencote Glued 2 N2BAB 0.M Chisel Class Galv Sencote Tape 2 N2BPE 0.M Chisel Reg. Galv Sencote Glued ¼ NBGB.M Chisel Stainless Sencote Glued ½ NBGB.M Chisel Stainless Sencote Glued ¾ N9BGBN.M Chisel Stainless Sencote Glued 2 N2BGBN.M Chisel Stainless Sencote Glued SENCO 6 Ga. /2" Crown Heavy Wire Length Item Code Count Point Finish Coating Collation ½ M M Chisel Reg. Galv Sencote Tape * Galv High tensile Note: Class Galv. finish is required to meet most building code requirements

37 FASTENERS SPECIALTY FASTENERS 6GA /2 Heavy Wire Staples PW * WC0XP P06 P08 P2 MWXP WC0XP, WC0RXP PW * WC0XP PW P0 P MWXP, PW, WC0XP, WC0RXP, WC200XP P P MWXP WC0XP, WC0RXP /4 WC200XP P P9 P2 /4 SENCO 6 Ga. " Crown Heavy Wire Sheathing, house wrap, composite roofing, roofing felt, corrugated containers, foam insulation board, furniture/cabinet frames and butt-joints Length Item Code Count Point Finish Coating Collation 8 P06BAA 0.M Chisel Class Galv Plain Glued ½ P08BABT 0.M Chisel Class Galv Sencote Taped 8 P0BAB 0.M Chisel Class Galv Sencote Taped 8 P0FAB 0.M Divergent Class Galv Sencote Glued 8 P0BPE 0.M Chisel Reg. Galv Coated Taped ¾ PBAB 0.M Chisel Class Galv Sencote Taped ¾ PBPE 0.M Chisel Reg. Galv Coated Glued 8 P2BAB 0.M Chisel Class Galv Sencote Taped PBAB 0.M Chisel Class Galv Sencote Taped PBPE 0.M Chisel Reg. Galv Sencote Glued ¼ PBAB 0.M Chisel Class Galv Sencote Taped ¼ PBRE 0.M Chisel Reg. Galv Sencote Taped ¼ PBPE 0.M Chisel Reg. Galv Coated Glued ½ PBAB 0.M Chisel Class Galv Sencote Taped ¾ P9BAB.M Chisel Class Galv Sencote Taped 2 P2BAB.M Chisel Class Galv Sencote Taped 2 P2BPE.M Chisel Reg. Galv Coated Glued PBGBN.M Outside Chisel Stainless Sencote Taped Note: Class Galv. finish is required to meet most building code requirements. Flooring Cleats and Staples SHF200 Cleats Nailer SHFS200 Stapler Concrete and Steel Pins SHF200, SHF0, SHF.06 /2 GT40CP SCP40XP /4 2_ ½ ¾.09/ ½ ¾ 2 SHFS200 2 SENCO 6 Ga. L Head Flooring Cleat Nails Installation of ½" - 2" hardwood flooring Length Item Code Count Point Finish Collation ½ x.06 RWBPE.M Blunt Diamond Bright Straight Glued, strip 4 x.06 RW9BPE.M Blunt Diamond Bright Straight Glued, strip 2 x.06 RW2BPE.M Blunt Diamond Bright Straight Glued, strip 2 x.06 RW2BGE.M Blunt Diamond Stainless Straight Glued, strip SENCO. Ga. ½" Crown Flooring Staples Installation of ½" - ¾ Length Item Code Count Point Finish Coating ½ FLBAB.2M Chisel Galv. Sencote 4 FL9BAB.2M Chisel Galv. Sencote 2" FL2BAB.2M Chisel Galv. Sencote SLSXP-HF Stapler /4 SLSXP-HF SENCO Concrete and Steel Collated Pins 6 SENCO 9 Ga. /6" Crown SLS20XP-HF Hardwood flooring Staples For ¼", / 6", and / 8" thick solid hardwood and hardwood laminate floors. Length Item Code Count Point Finish Coating 8 R0BAB.M Blunt Galv Sencote ¾ RBAB.M Blunt Galv Sencote RBAB.M Blunt Galv Sencote Fastening drywall track, wood furring, hat channel, metal washers, ceiling grid to concrete, concrete block and steel. Length x Shank Item Code Count Head Diam Shank Style Finish Collation ½ x.09 W00YXS.M.20 Smooth/Step Zinc Plated Standard Washer Style ¾ x.09 W0PXC.M.20 Smooth Black Oxide Standard Washer Style ¾ x.09 W0YXC.M.20 Smooth Zinc Plated Standard Washer Style x.09 W00YXC.M.20 Smooth Zinc Plated Standard Washer Style ¼ x.09 W2YXC.M.20 Smooth Zinc Plated Standard Washer Style /2 Crown: (2.4mm) Width:.062 Thickness:.0 Gauge: 6 GA /4 Crown: /6 (.mm) Width:.04 Thickness:.06 Gauge: Q /6 /2 /4 Q /6 /4 Q9 /6 2 SQSXP Q2 2 /6 2 /4 Q2 /6 2 /2 Q2 /6 * WC0XP Short Staples Order block-out kit YK086 to drive staples under ¾ SENCO Ga. /6" Crown Heavy Wire Framing, sheathing, subflooring, decking, lathing, door & window units, fencing, pallets, crate and box assembly, furring and furniture framing Length Item Code Count Point Finish Coating Collation ½ QBRB.M Chisel Bright Sencote Taped ¾ Q9BRB.M Chisel Bright Sencote Taped 2 Q2BRB.M Chisel Bright Sencote Taped 2¼ Q2BRB.M Chisel Bright Sencote Taped 2½ Q2BRB.M Chisel Bright Sencote Taped ¼ QBAB.M Chisel Class Galv Sencote Taped ½ QBAB.M Chisel Class Galv Sencote Taped ¾ Q9BAB.M Chisel Class Galv Sencote Taped 2 Q2BAB.M Chisel Class Galv Sencote Taped 2¼ Q2BAB.M Chisel Class Galv Sencote Taped 2½ Q2BAB.M Chisel Class Galv Sencote Taped ¾ Q9BGBN 2.2M Chisel Stainless Sencote Taped 2½ Q2BGBN.M Chisel Stainless Sencote Taped Note: Class Galv. finish is required to meet most building code requirements. SCP40XP drives pins form /2" to -/2" Corrugated s /4 SC2 X04 X06 X08 Crown: " (2mm) Thickness:.020 Gauge: 2 Crown: /6 (mm) Thickness:.020 Gauge: 2 /2 Y0 /6 Y0 /6 Y09 /6 ¼ /6 SCXP 9 /6 /6 For A6 Steel ½ W00YXS Zinc Plated For Concrete and Masonry ¾ W0PXC Black Oxide ¾ W0YXC Zinc Plated W00YXC Zinc Plated ¼ W2YXC Zinc Plated 000 pins per pack, standard washer style. SENCO Sencor 2 Ga. Corrugated Butt and miter joints See page 2 for specfications on magnetic nosepiece for attaching -/4" galvanized metal washers (must be purchased separately) Crown x Length Item Code Count Point Finish Coating x /4 X04NRA 8.M Sharp Chisel Bright Plain x X06NRA.M Sharp Chisel Bright Plain x /2 X08NRA 4.M Sharp Chisel Bright Plain SENCO Senclamp 2 Ga. Joint Butt and miter joints Crown x Length Item Code Count Point Finish Coating /6 x /6 Y0BFA.M Chisel Bright Plain /6 x /6 Y0BFA.M Chisel Bright Plain /6 x 9/6 Y09BFA.M Chisel Bright Plain 0

38 SPECIALTY FASTENERS Building Wrap & Felt Fastening System SCREW IDENTIFICATION SENCO AUTO-FEED SCREWS Example of 2-Digit Code rd Digit: Application/ 0M0YKFT4X: 0 M 0 Y K F T 4 X digit Screw Coding #0" /4" Yellow Zinc M Flat Pan Fine 22 TPI T4 Rex -2 Digits Digit 4-6 Digits Digit 8 Digit 9 Digit 0 Digit Digit 2 Digit Diameter Application Length Coating/Finish Carton Count Head Type Thread Point Drive Type 06 #6 A Drywall to Wood 044 /6" mm C Clear Zinc B Bulk A Round Washer C Coarse T P Phillips 8 ½ Crown: 2 (2.mm) Gauge: 2 Plaster, Stucco & Building Wrap Fastening Systems : Fits BC8 Buton Cap Stapler System, 2200 caps and staples per box. Drives staple and plastic button cap in tandem saving time and money when installing felt paper and house wrap. M " Button Cap & ½" Crown 2 Ga. Staple House wrap and roof felt installation Item# Crown x Length Count Point Finish Collation Fits M Staple /2 x 2.2M Chisel Galv Glued strip BC8 Button Cap Button Plastic Laser weld stack Metal & Plastic Washers Reduce install time by using collated screws or pins s available for wood, steel, concrete, and block substrates. Galvanized Metal Washer Senco galvanized metal washers are ideal for installation and repair of plaster and stucco. Washers are designed for use with screws or concrete pins. Fits Item# Diameter Count Screw Series SWM2A ¼ M 06A, 06B, 06C, 0A Fits Item# Diameter Count GT40CP, SCP40XP pins SWM2B ¼ M.09 Dia. Concrete Pins Plastic Washer Plastic washers are designed to secure building wrap products and felt paper to the exterior of buildings. We offer screws for steel or wood studs. Fits Item# Diameter Count Screw Series SWMA ¾ M 06A, 06B, 06C, 0A (forms seal around screw) Nose Pieces for Washer Simple snap-in washer holders available for selected Senco & TyRex auto-feed screw systems and SCP40XP pneumatic or GT40CP gas concrete pinners. Metal Washer Nose Pieces Auto-feed Screw Systems Fits Tools Range Item# SENCO DS2-8v ¼ NPC00 SENCO DS00-AC TyRex DCF000 ¼ NPC02 TyRex TY00 Concrete Pinners Fits Tools Range Item# GT40CP ¼ NPC0 SCP40XP Magnetic washer nose piece Plastic Washer Nose Pieces Auto-feed Screw Systems Fits Tools Range Item# SENCO DS2-8v ¾ NPC029 SENCO DS00-AC TyRex DCF000 ¾ NPC028 TyRex TY00 0 # B Drywall to Lt. Ga. Steel 00 /2" 2mm P Phosphate K B Bugle Head D Double 4 T4 S Square 08 #8 C Drywall to Heavy. Ga. Steel 062 6mm S Stainless Steel T Tub C Composite Deck E Fine 8 TPI T X Rex 09 #9 D Decking Wood to Wood 0 /4" 9mm W Exterior L Loose F Flat Pan F Fine A Wing T 0 #0 F Flooring Plywood to Wood 08 " 22mm Y Yellow Zinc H Hex H Hi-Lo B Wing T4 2 #2 G Sheathing to Steel 00 " 2mm L Flat T Fine 22 TPI C Wing T 4 #4 L Flooring (Novadeck) 2 -/4" 2mm N Reduced Wafer D Drill M Metal to Metal 0 -/2" 8mm M Mod. Flat Pan N Spoon Q Underlayment 62 -" 4mm P Pan P Pilot R Composite Decking-Trim Hd -/4" 44mm R Reduced Mod. Truss S Sharp S Composite Deck-Cup Hd 200 2" 0mm T Trim T Type T Cement Board 20 2-/2" 6mm W Wafer Head W Wing X Specialty 00 " mm 0 Digit Painted Composite Deck Screws Coding -2 Digits Digit 4-6 Digits Digit 8-0 Digits Diameter Application Length Coating/Finish Painted screws only Carton Count Head Type Thread Point Drive Type 08 #8 S Composite Deck-Cup Head 20 2-/2" 6mm W Exteriors 00 Gray 800 Tub Composite Deck /2 Coarse Sharp Square 00 " mm 6 SS6 49 Brown 92 Tan 96 Red Material or Profiles & for s by Application When Fastening to/application Head Type Point Drive Thread Finish Wood Bugle Sharp Phillips Coarse Grey Phosphate Interior Drywall Light Steel Bugle Sharp Phillips Double Thread Grey Phosphate Heavy Steel Bugle Drill Phillips Fine Clear Zinc/Exterior Exterior Drywall/Gypsum Sheathing Heavy Steel Bugle Drill Phillips Fine Clear Zinc/Exterior Subflooring-Wood Wood Flat Sharp/ Type Square Coarse or ¾ Coarse Yellow Zinc Subflooring-Engineered Lumber Wood Trim Head + nibs Sharp Square High Low Yellow Zinc Wood Framing Interior Flat Sharp Square Coarse or ¾ Coarse Yellow Zinc Exterior Flat Type Square ¾ Coarse Stainless/Exterior Wood Flat Sharp / Type Square Coarse or ¾ Coarse Clear/ Yellow Zinc Sheathing Light Steel Flat Sharp Square Double Thread Clear Zinc Heavy Steel Flat/Wafer/Wafer+Nibs/Reduced Wafer Drill/Pilot/Wing Drill Square/Phillips/Rex Fine Clear / Yellow Zinc or Exterior Decking Wood Flat Type Square ¾ Coarse Stainless/Exterior Composite Cupped Pan or Trim Sharp/ Type Square ½ or ¾ Coarse Colored Exterior Wood Flooring Wood Flat Type Square Coarse Clear Zinc Crating & Pallets Wood Trim Head+Nibs Sharp Phillips/Square High Low Grey Phosphate Cement Board Metal Framing Wood Light Gauge Metal Wafer + Nibs Framing Pan/Reduce Mod Truss Spoon Sharp/ Drill Square Phillips High Low Fine / Double Exterior Grey Phosphate / Clear Zinc Steel Heavy Gauge Metal Wafer + Nibs Flat Pan/Mod Flat Pan/Reduced Wafer Drill Drill Square Square/Phillips/Rex Fine Fine / 22 TPI Exterior Clear / Yellow Zinc General Purpose Non Countersinking/ Round Washer Drill/ Type Square Coarse / Double Clear Zinc Underlayment Wood Trim Head+Nibs Sharp PhillipsSquare High Low Grey Phosphate 2

39 Drywall to Wood Sharp point drywall screws used for fastening interior Drywall to wood. SENCO AUTO-FEED SCREWS Wood to Wood General purpose wood screws commonly used for interior subflooring. Wood to Heavy Steel Pilot point screw designed for use in sheathing to heavy steel. SENCO AUTO-FEED SCREWS Wood to Heavy Steel (continued) Up to /6" thick, wing drill point screws designed for use in sheathing to steel members. #2 Phillips Bugle Sharp 06A2P #6 /4 Coarse Gray Phosphate 000 Tub 06A2PB #6 /4 Coarse Gray Phosphate A62P #6 Coarse Gray Phosphate 000 Tub 06A62PB #6 Coarse Gray Phosphate A200P # 2 Coarse Gray Phosphate 000 Tub 08A20PK #8 2 /2 Coarse Gray Phosphate A62W #6 Coarse Exterior 000 Tub #2 Square Flat Sharp 08F0Y #8 /2 Coarse Yellow Zinc 000 Tub 08FY #8 /4 2/ Coarse Yellow Zinc 000 Tub 08F200Y #8 2 2/ Coarse Yellow Zinc 000 Tub 08F20Y #8 2 /2 2/ Coarse Yellow Zinc 800 Tub 08F00Y #8 2/ Coarse Yellow Zinc 800 Tub 0F200Y #0 2 2/ Coarse Yellow Zinc 000 Tub Type point for quick drives, commonly used for interior Nova Deck (same as particle board) and subflooring. #2 Square Flat Pilot 08G200CKLFPS #8 2 Fine Clear Zinc 000 Wing Drill point screws designed for use in sheathing to heavy steel. Rex Flat Wing T drill 2GYKLFAX #2 /4 Fine Yellow Zinc 000 Up to /2" thick, wing drill point screws designed for use in sheathing to steel members. Drywall to Light Steel Sharp point, fine thread, Drywall screws used for fastening interior Drywall to light gauge metal studs. #2 Square Flat Type 08LYB #8 /4 Coarse Yellow Zinc 4000 #2 Square Wafer + nibs Wing drill 08G62CTWFWS #8 Fine Clear Zinc 000 Tub 0G62CTWFWS #0 Fine Clear Zinc 000 Tub 08G200CTWFWS #8 2 Fine Clear Zinc 000 Tub 08G20CTWFWS #8 2 /2 Fine Clear Zinc 800 Tub 08G00CTWFWS #8 Fine Clear Zinc 800 Tub Rex Flat Wing T drill 2G200YKLFCX #2 2 Fine Yellow Zinc 000 2G20YKLFCX #2 2 /2 Fine Yellow Zinc 000 #2 Phillips Bugle 06B2P #6 /4 Double Thread Gray Phosphate 000 Tub 06B2PB #6 /4 Double Thread Gray Phosphate B62P #6 Double Thread Gray Phosphate 000 Tub Drywall to Heavy Steel Sharp Underlayment Trim head screws designed for underlayment, high speed wood to wood and crating/pallet applications. 08G200WTWFWS #8 2 Fine Exterior 000 Tub Low profile head ideal for sheathing to steel studs where sheathing density or finish requirements restrict deep countersinking of the fastener. Wood to Light Steel Sharp point wood screw designed for use in sheathing to metal applications. Drywall screws with a self drilling point used for fastening interior Drywall board to heavy gauge metal studs. #2 Phillips Bugle 06C00C #6 Fine Clear Zinc 000 Tub 06C2C #6 /4 Fine Clear Zinc 000 Tub 06C2CB #6 /4 Fine Clear Zinc C62C #6 Fine Clear Zinc 000 Tub 06C62CB #6 Fine Clear Zinc C200C #6 2 Fine Clear Zinc 000 Tub Gypsum to Heavy Steel Drill Screws with a self drilling point used for fastening exterior Gypsum board to heavy gauge metal studs. 06C2WK #6 /4 Fine Exterior C62WK #6 Fine Exterior C00WK #8 2/ Fine Exterior 000 #2 Phillips Sharp 0Q00PB # High Low Gray Phosphate Q2PB # /4 High Low Gray Phosphate 4000 #2 Square Trim head + nibs Trim head + nibs Sharp 0Q2PBQ # /4 High Low Gray Phosphate 4000 Specially designed wood screw intended for use in harder engineered lumber and flooring materials. #2 Square Trim Sharp head + nibs 08F200YBTHSS #8 2 High Low Yellow Zinc 4000 #2 Phillips Reduced wafer Drill 08G00CKNFDP #8 Fine Clear Zinc 000 Drill point screw designed for sheathing to heavy steel. #2 Square Wafer Drill 0G2CBWFDS #0 /4 Fine Clear Zinc 4000 #2 Square Flat Sharp 08G0CTLDSS #8 /2 Double Clear Zinc 000 Tub DRYWALL/ GYPSUM SHEATHING Finishes COMPOSITE DECKING METAL TO METAL SHEATHING (SUBFLOOR, UNDERLAYMENT, CEMENT BOARD) SPECIALTY DECKING Exterior Gray Phosphate Exterior/Brown Exterior/Gray Exterior/Red Exterior/Tan Stainless 04 Zinc, Clear Zinc, Yellow 4

40 Wood Flooring Self tapping interior screw for attaching wood flooring to wood. SENCO AUTO-FEED SCREWS Composite Decking Trim head screws for attaching composite decking to wood. Metal to Metal General purpose metal to metal screws SENCO AUTO-FEED SCREWS Light Metal Framing Self taping metal framing screw. #2 Square Flat Type 08L2CBLCTS #8 /4 Coarse Clear Zinc 4000 #2 Square Trim Type Stainless 04 08R20W #8 2 /2 2/ Coarse Exterior 800 Tub 08R00W #8 2/ Coarse Exterior 800 Tub 08R20S #8 2 /2 2/ Coarse Stainless Tub #2 Square Modified flat pan Drill 0M0CTMFDS #0 /4 Fine Clear Zinc 000 Tub 0M00CKMFDS #0 Fine Clear Zinc 000 #2 Phillips Framing pan Sharp 0M044PTPDSP # /6 Double Grey Phosphate 000 Tub Cement Board Cement board, Hardie board to wood. Exterior finish. Specially designed cup head screws eliminate the mushrooming around the screw head common with composite deck installation. #2 Phillips Reduced wafer Drill 0M0CKNFDP #0 /4 Fine Clear Zinc 000 #2 Phillips Reduced mod truss Drill 08M00CTRFDP #8 /2 Fine Clear Zinc 000 Tub #2 Square Wafer + nibs Spoon 08T2W #8 /4 High Low Exterior 000 Tub 08T200W #8 2 High Low Exterior 000 Tub Cement board, Hardie board to steel studs. Exterior finish. #2 Square Cupped Pan Sharp 08S20W00 #8 2 /2 /2 Coarse Exterior/Gray 800 Tub 08S00W00 #8 /2 Coarse Exterior/Gray 800 Tub 08S20W92 #8 2 /2 /2 Coarse Exterior/Tan 800 Tub 08S00W92 #8 /2 Coarse Exterior/Tan 800 Tub Rex Drive Flat pan Drill 0M0YTFFDX #0 /4 Fine Yellow Zinc 000 Tub Rex Drive Flat pan T4 Drill 0M0YLFT4X #0 /4 22 TPI Clear Zinc 8000 Loose 0M0YKFT4X #0 /4 22 TPI Clear Zinc 000 2M08YKFF4X #2 Fine Yellow Zinc M00CTRFSP #8 /2 Fine Clear Zinc 000 Tub Specialty #2 Phillips Reduced mod truss Sharp General purpose screws used in a wide array of applications including window installation and crating. Ideal for applications where the screw is not intended to countersink below the surface. #2 Square Wafer + nibs Drill 08T0WBWFDS #8 /2 Fine Exterior 4000 Decking and Docks 08S20W96 #8 2 /2 /2 Coarse Exterior/Red 800 Tub 08S00W96 #8 /2 Coarse Exterior/Red 800 Tub 08S20W49 #8 2 /2 /2 Coarse Exterior/Brown 800 Tub 08S00W49 #8 /2 Coarse Exterior/Brown 800 Tub Rex Drive Flat pan T Drill 2M00YKFFX #2 Fine Yellow Zinc 000 #2 Square Round washer Type 08X2CBACTS #8 /4 Coarse Clear Zinc 4000 Exterior wood screws for any exterior project like decks, fencing, siding, docks and more. Rex Drive Flat pan Drill 0M062CBFFDX #0 Fine Clear Zinc M0CTFFDX #2 /2 Fine Clear Zinc 000 Tub #2 Square Round Washer Drill 08X2CKADDS #8 /4 Double Clear Zinc X200CKADDS #8 /2 Double Clear Zinc 000 #2 Square Flat Type Stainless 04 08DW #8 /4 2/ Coarse Exterior 000 Tub 08D200W #8 2 2/ Coarse Exterior 000 Tub 08D20W #8 2 /2 2/ Coarse Exterior 800 Tub 08D00W #8 2/ Coarse Exterior 800 Tub 08D20S #8 2 /2 2/ Coarse Stainless Tub 09D00S #9 2/ Coarse Stainless Tub DRYWALL/ GYPSUM SHEATHING Finishes COMPOSITE DECKING METAL TO METAL SHEATHING (SUBFLOOR, UNDERLAYMENT, CEMENT BOARD) SPECIALTY DECKING Exterior Exterior/Brown Exterior/Gray Exterior/Red Exterior/Tan Gray Phosphate Stainless 04 Zinc, Clear Zinc, Yellow 6

41 Bits Integrated Auto-Feed Screw System two drive bits per pack Bits Fits item# item# item# DS200-AC EA022 EA02 EA0269 DS202-4V DS20-4V DS22-8V EA029 EA0298 EA0299 DS2-8V DS22-AC DS2-AC DS2-8V EA040 EA04 EA020 DS00-AC DS2-8V EA000 EA00 EA002 DS2-AC Integrated tools include 2 bits Bits Screwdriver Attachment Kit two drive bits per pack Bits Fits item# item# item# DS2AC EA02 EA022 EA02 DS40AC DS42AC EA04 EA0 EA06 DS440AC Attachment Kits include bits Bit Tips Bulk Screwdriver 0 drive bits per pack Bits Fits SG20 SG400 item# EA008 Bit Tips & Holders Auto-Feed Screw System five bit tips and one holder per pack For use with prior Duraspin tools Bit Tip Holder Bit Tips Fits item# item# item# DS62-4V XC006 EA042 EA04 DS200-AC DS200-4V DS202-4V DS20-4V DS2-8V XC000 DS00-AC DS00-24V SENCO AUTO-FEED SCREWS ACCESSORIES Bits Screwdriver & Attachments two drive bits per pack Screwdriver & Attachment Combinations SENCO SG20 item# item# item# + DS0 EA02 EA028 EA029 + DS20 EA02 EA028 EA029 + DS220 EA0 EA02 EA0 + DS0 EA02 EA022 EA02 + DS20 EA04 EA0 EA06 SENCO SG400 + DS0 EA02 EA028 EA029 + DS20 EA02 EA028 EA029 + DS220 EA0 EA02 EA0 + DS0 EA02 EA022 EA02 + DS20 EA04 EA0 EA06 Makita with ADP09 and MB04 + DS0 EA02 A028 EA029 + DS20 EA02 EA028 EA029 + DS220 EA0 EA02 EA0 + DS0 EA02 EA022 EA02 + DS20 EA04 EA0 EA06 Makita with ADP0 and AD DS0 EA0280 EA028 EA DS20 EA0280 EA028 EA DS220 EA0 EA08 EA09 + DS0 EA024 EA02 EA026 + DS20 EA020 SEA02 EA022 Black & Decker, DeWalt, Hitachi, Makita with ADP0 ADP020, TY800 + DS0 EA0280 EA028 EA DS20 EA0280 EA028 EA DS0 EA024 EA02 EA026 + DS220 EA0 EA08 EA09 + DS20 EA020 EA02 EA022 Nosepieces for Wood, Drywall & Metal Framing SENCO AUTO-FEED SCREWS ACCESSORIES SENCO Wood Drywall Metal Framing Fits Tools Range item# item# Range item# DS200 "-2" FA02 FA098 6" - ¼" FC0489 DS200-S4 DS200-AC DS202-4v DS22-8v '-2" FB0 FC088 ½" - 2" FC0822 DS2-8v DS220 DS22-AC DS2-AC DS2-8v "-" FB09 FC089 ½" - " FC088 DS20 DS2-AC DS42AC DS44OAC Nosepieces & Metal Washers for Lath & Building Wrap, Plaster, PM, Stucco, One Coat And Hard Coat SENCO Fits Tools Range Item# DS2-8v ¼ NPC00 DS00-AC TyRex DCF000 ¼ NPC02 TY00 Item# Diameter Count Fits Screw Series SWM2A ¼ M 06A, 06B, 06C, 0A Nosepieces & Plastic Washers Building Wrap, Eifs Installation, PB, PM, Stucco, One Coat And Hard Coat SENCO Fits Tools Range Item# DS2-8v ¾ NPC029 DS00-AC TyRex DCF000 ¾ NPC028 TY00 Item# Diameter Count Fits Screw Series SWMA ¾ M 06A, 06B, 06C, 0A (forms seal around screw) 8 9

42 Adapter for Bulk Screwdrivers For use when attaching bulk screwdrivers to attachments Screwdriver SENCO Adapter Fits Tools item# SG20 MB0 SG400 SG200 ADP0 SG4000 DeWalt DW22 ADP009 DW2 DW2 DW2 DW266 DW22 DW26 MAKITA FS2200 ADP09 FS200 FS4200 FS6200 FS20 MB04 680BV ADP ADP HITACHI W6V4 ADP00 W6VA4 W6VB W6VM W8VB2 WH4DM ADP0 TyRex TY800 ADP04 SIOUX Screwdrivers with ¼" Internal Hex feature ADP08 SENCO AUTO-FEED SCREWS ACCESSORIES Battery Systems Works with all 8-volt Li-ion SENCO FUSION and Duraspin II tools.8v Li-ion Battery 8v Li-ion Battery item# VB0 Fits DS22-8v DS2-8v DS-8v 8v Li-ion Charger item# VB06 Charges VB0 VB08 4.4v NiCd Battery item# VB002 Fits DS202-4v DS20-4v 8v (NiCd) Battery item# VB006 Fits DS2-8v NiCd Charger item# VB0002 Charges VB002 VB006 ACCESSORIES Filters, Regulators, Lubricants, Plugs, Couplers, Hoses, Part Kits and more. Filters, Regulators & Lubricators SENCO's assortment of filters, regulators, lubricators and gauges are precision engineered to meet the demanding requirements of professional contractors. Be sure that your compressor is running at peak performance by using SENCO certified replacement parts and accessories. PC066 PC06 PC06 Air Regulation Accessories: Regulator with Gauge Item # Description Max psig Max airflow FPT Size NPT Gauge PC066 Mini Regulator with Gauge 20 4 SCFM /4" " PC06 Regulator with Gauge 00 4 SCFM /4" " PC06 Regulator with Gauge SCFM " " Item # Description Max psig Max airflow FPT Size NPT Gauge PC0660 Filter/Regulator with Gauge 0 4 SCFM /4" " PC06 Filter 0 4 SCFM /4" Item # Description Max psig FPT Size MPT Gauge PC046 In-Line Regulator 0 /4" /4" Regulate multiple tools from one compressor PC00 Back-Mount Pressure Gauge 60 " PC00 Back-Mount Pressure Gauge 60 /4" Plugs & Couplers Blister-packed for easy display Also available bulk-packed in boxes of 0 Stainless steel locking ball bearings Positive alignment and free swiveling action to reduce hose torque Packaged hose assembly sets include a plug and a coupler Plug and Coupler Hose Assembly Sets Industrial Interchange Item # Description Body Size NPT Size Pack Qty PC06 Connects to hose with MPT fittings /4" /4" FPT PC06 Connects to hose without MPT fittings /4" /4" LHB Universal Couplers Just push plug into coupler, no need to pull back on sleeve Item # Description BodySize NPT Size Pack Qty PC0900 Universal Coupler (female) /4" /4" FPT PC0698 Universal Coupler (female) /4" /4" FPT 0 PC090 Universal Coupler (male) /4" /4" FPT PC0699 Universal Coupler (male) /4" /4" FPT 0 PC0660 PC06 PC066 PC06 PC06 PC00 PC046 PC00 Available Styles Plugs and couplers come in two styles, Industrial Interchange and Tru-Flate. Stay within one of these two system, or use a universal coupler to complete the connection. female male 80 8

43 ACCESSORIES Plugs & Couplers Industrial Interchange Plug Male Plug Female Plug Push-On Locking Barb Plug Push-On Standard Barb Plugs Industrial Interchange Item # Description Body Size Size Pack Qty PC049 Plug (male) /4" /4" MTP 2 PC02 Plug (male) /4" /4" MTP 0 PC0480 Plug (male) /4" " MTP 2 PC04 Plug (male) /4" " MTP 0 PC0486 Plug (male) " /4" MTP 2 PC048 Plug (male) " " MTP 2 PC04 Plug (female) /4" /4" FTP 2 PC029 Plug (female) /4" /4" FTP 0 PC048 Plug (female) /4" " FTP 2 PC040 Plug (female) /4" " FTP 0 PC06 Plug (push-on barb) /4" /4" LHB PC02 Plug (push-on barb) /4" /4" LHB 0 PC0 Plug (push-on barb) /4" " LHB PC042 Plug (push-on barb) /4" " LHB 0 PC024 Plug (push-on barb) /4" /4" SHB 0 Coupler Male Coupler Female CouplerPush-On Locking Barb Couplers Industrial Interchange Item # Description Body Size Size Pack Qty PC00 Coupler (male) /4" /4" MPT PC020 Coupler (male) /4" /4" MPT 0 PC004 Coupler (male) /4" " MPT PC080 Coupler (male) /4" " MPT 0 PC009 Coupler (male) " " MPT PC00 Coupler (male) " /4" MPT PC00 Coupler (female) /4" /4" FPT PC0209 Coupler (female) /4" /4" FPT 0 PC002 Coupler (female) /4" " FPT PC08 Coupler (female) /4" " FPT 0 PC00 Coupler (female) " " FPT PC00 Coupler (push-on barb) /4" /4" LHB PC020 Coupler (push-on barb) /4" /4" LHB 0 PC006 Coupler (push-on barb) /4" " LHB PC09 Coupler (push-on barb) /4" " LHB 0 PC02 Coupler (push-on barb) /4" /4" SHB 0 LHB - Locking Hose Barb, no clamp required when used with SENCO Quick Couple Hose. SHB - Standard Hose Barb, requires hose clamps. See page 8 for hose clamps. Danger: Failure to use proper hose clamp with SHB fittings may result in hose detaching from fitting and causing personal injury. Air Hoses SENCO offers a wide variety of air hoses in various materials, sizes and specifications for your job site. Quick Couple Rubber Hose SENCO s Best Handles up to 20 psi working pressure 4 to working pressure to burst safety factor Oil resistant nitrile tube Tough, flexible neoprene cover Braided textile reinforcing for max strength & kink resistance Remains flexible, temperature ranges: -40 F to 200 F Item # Description Hose Size Length Qty. PC004 Gray without fittings (Use with LHB type fittings) /4" 0 ft. PC0046 Gray without fittings (Use with LHB type fittings) /4" 00 ft. PC0048 Gray without fittings (Use with LHB type fittings) " 0 ft. Coupler Push-On Standard Barb Gray without fittings PC0049 Gray without fittings (Use with LHB type fittings) " 00 ft. Gray with MPT ends PC009 Gray with MPT ends (Use with FPT type fittings) /4" 0 ft. PC0060 Gray with MPT ends (Use with FPT type fittings) /4" 00 ft. PC0062 Gray with MPT ends (Use with FPT type fittings) " 0 ft. Gray with Plug & Coupler PC006 Gray with MPT ends (Use with FPT type fittings) " 00 ft. PC0064 Gray with Indusstrial Interchange Plug & Coupler fittings /4" 0 ft. PC2 Gray with Indusstrial Interchange Plug & Coupler fittings /4" 00 ft. PC006 Gray with Indusstrial Interchange Plug & Coupler fittings " 0 ft. PC004 Bulk Gray without fittings (Use with LHB type fittings) /4" 40 ft. & up PC0042 Bulk Gray without fittings (Use with LHB type fittings) " 40 ft. & up Bulk hose can only be purchased in reels of 40 feet and up combined length with a maximum of four sections. Priced by the foot. Not packaged for retail. Bulk Gray Hose Air Hoses ProFlex Reinforced Polyurethane Red Air Hose Lightest available non-marring flexible hose! Flexible in cold weather, temperature range: -48 F to 0 F Durable oil and fuel resistant Working pressure: 20 psi With MPT Threaded Ends Item # Description Hose Size Length Qty. PC09 ProFlex with MPT ends (Use with FPT type fittings) /4" 0 ft. PC098 ProFlex with MPT ends (Use with FPT type fittings) /4" 00 ft. PC099 ProFlex with MPT ends (Use with FPT type fittings) " 0 ft. PC0980 ProFlex with MPT ends (Use with FPT type fittings) " 00 ft. PVC Air Hose Specially formulated polyvinyl chloride Resistant to lubricating oils, chemicals and ultraviolet sunlight Flexible temperatures: -20 F to 0 F Handles up to 00 psi working pressure With MPT Threaded Ends Item # Description Hose Size Length Qty. PC09 PVC with MPT ends (Use with FPT type fittings) /4" 0 ft. PC098 PVC with MPT ends (Use with FPT type fittings) " 0 ft. Air Hose Accessories Splicer Item # Description Size Qty PC064 Push-On Barbed Hose Splicer /4" LHB 2 PC0644 Push-On Barbed Hose Splicer " LHB 2 ProFlex Hose Fittings Item # Description Size Qty PC098 Brass hose end /4" MPT PC0984 Brass hose end " MPT PC098 Brass hose end & Splicer /4" MPT PC0988 Brass hose end & Splicer " MPT Hose Clamps Item # Description Pack Qty PC02 /4" Hose Clamp PC0 " Hose Clamp PC04 " Hose Clamp PC044 Hose Clamp Crimping Pliers Tri-Pod Manifold Item # Description Inlet Thread Outlet Thread Qty PC0444 -Way Round Manifold " FPT /4" FPT PC8 -Way Flat Manifold /4" plug /4" coupler Industrial Interchange Blow Gun Item # Description Inlet Thread Qty PC0489 Air Blow Gun /4" FPT Teflon Thread Sealing Tape Item # Description Qty PC049 /2" x 260 ft. Sealing Tape ACCESSORIES ProFlex with MPT ends PVC with MPT ends 82 8

44 ACCESSORIES Lubricants, Oil, Cleaners and Coating Pneumatic Tool Oil Premium-grade oils formulated with high-quality paraffin distillate stocks Contains a carefully balanced rust and oxidation inhibitor with an effective anti-foaming additive Item # Description BottleSize Case Qty. PC00 Pneumatic Tool Oil /2 pint 8 oz 2 PC002 Pneumatic Tool Oil quart 2 oz 2 PC00 Pneumatic Tool Oil gallon 28 oz 4 Compressor Pump Oil Premium-grade oils formulated with high-quality naphthenic distillate stocks Recommended for all oil-splash compressors Protects against corrosion Lubricates to extend part life Item # Description BottleSize Case Qty. PC044 Compressor Pump Oil quart 2 oz 2 Moisture Shield Tool Lubricant For use in cold weather and/or high moisture areas Protects against corrosion Lubricates to extend part life Special additive to minimize exhaust fog Item # Description BottleSize Case Qty. PC29 Moisture Shield Tool Lubricant quart 2 oz 2 Tool Lubricant Protects against corrosion Lubricates to extend part life Special additive to minimize exhaust fog Item # Description BottleSize Case Qty. YB02 Tube of Tool Lubricant 4 oz tube 2 Safety Glasses SENCO s safety glasses offer the ultimate in style and comfort while providing the highest level of eye protection. Produced with a strong, lightweight poly carbonate lens that meets or exceeds ANSI Z8. and CE EN 66 safety standards. Item # Description Case Qty. PC66 Wrap-around design filters 99.9% of UVA & UVB rays. For indoor and outdoor us 0 PC284 Standard Clear Glasses 0 Tool Belt Hooks Item # Description Size Qty. PC00 Attaches to /4" air fitting on tool Standard PC0629 Attaches to /4" air fitting on tool X-Wide PC0 Attaches to " air fitting on tool Standard PC060 Attaches to " air fitting on tool X-Wide PC094 Attaches to BELT Fits FinishPro42XP Drain Cock Item # Description Size Qty. PC0 Drains moisture from tank, finger adjustable. /4" MPT Standard width X-wide width FIP42XP Belt Hook No-Mar Pads No-Mar Pads replacement, one per pack Item # No-Mar Pads Fit: Item # No-Mar Pads Fit: HF008 AF2, CF2 HC0626 GT6DA HF009 AF4, CF4 HC062 GT6RHA HC046 FIP HA0200 GT90CH HC006 FIP, FIP8 HA020 GT90FRH HC0 FIPMg, FIP8Mg HC06 SCN49 HF0064 FIP2XP 0006 SCN6 HC096 FIP2* HF009 SFN0, SFN40, SFNI HCO40 FIP2** HB00 SFN2 HF009 FIP4XP, FIP42XP HC00 SLS, SLS8 HF0 FNAX HC02 SLSMG, SLS8Mg HF00 FN6DA HF0028 SLS20, SLS20XP (K, L, & R crowns) HF0046 & HC02 FP Series HF0029 SLS20, SLS20XP (M crown) HA00 FP60, FP602, FP6, FP62 HF0028 SLS2-L, SLS2XP-L HF0046 & HC02 FP00 Series AF: AirFree, CF: Cordless Finish, FIP: FinishPro, FP: FramePro, FN: Fusion, GTL: Gas Tool *Reverse Safety, After Fall 2006 **Forward Safety, Pre-Fall 2006 VB0 8 volt Li-ion Battery SENCO's VB0 8v Li-ion battery is compatible with all the SENCO 8v Li-ion cordless tools. High quality, reliable cells. amp hour Low self-discharge rate longer storage life Charges to 80% in -20 minutes NOTE: VB0 & VB06 batteries requires the SENCO battery charger model VB06 LED Fuel Gauge Charging Indicator display ACCESSORIES Li-ion Batteries and Chargers One Common Battery Platform. Works with all 8-volt Li-ion SENCO FUSION and Duraspin II tools. SENCO's 8-volt Li-ion battery is designed for long running times with quick recharges and operates at full speed until depleted, so there is no gradual drop in power during use. Batteries can be charged hundreds of times without any noticeable loss in capacity, and a special LED fuel gauge displays the battery life with a touch of a button. VB0 Li-ion Battery Fits these FUSION Tools: F- (N000N), F-6A (P000N), F-6S (6U000N) F-8 (6E000N) Fits these Duraspin tools: DS2-8v (W000N), DS22 (X000N), DS2-8v (Y000N) NiCd Slide Batteries and Charger NiCd Powered DuraSpin, Finish Cordless, AirFree Cordless Tools VB06 8 volt Li-ion Battery Charger VB06 Battery Charger can be used interchangeably with SENCO VB0 and VB08 batteries. Quick charging system reaches 80% in just -20 minutes Battery charge indicators display the charge status of your battery NOTE: Older charger model VB020 included with early Fusion tools will NOT charge the VB0 battery VB06 Li-ion Battery Charger Charges these batteries: VB08, VB0 Scan for more on SENCO's 8 volt Li-ion battery & charger. Item# NiCd Slide Battery Systems Qty Fits VB002 VB002 Battery 4.4v (2.0Ah) From 06/0 on: DS202-4v, DS20-4v, AirFree 2, 2 & 4, Cordless Finish 2, 2 and 4 VB006 Battery 8v (2.0Ah) DS2-8v VA00 Battery 24v (2.0Ah) DS00-24v VB0002 Charger 9.6v-24v Charges VB0022, VB002, VB006 & VB00 Batteries VB006 VB

45 PARTS KITS ITEM CODE TOOL INDEX SENCO repair kits are designed to provide the parts normally needed to properly maintain and service your Senco tools. For XP tools, there are two kits available: a Firing/Triggering System Kit to repair top air leaks or sluggish operation and a Piston Stop Kit to repair bottom air leaks or poor return. For Pro Series tools, these two kits are combined into one convenient kit. Tool Model Description Kit No. FinishPro, 8, 2N...Repair Kit... YK09 FinishPro Mg, 8Mg...Repair Kit... YK080 FinishPro2LXP...Repair Kit... YK08 FinishPro2SXP...Repair Kit... YK084 FinishPro 2XP...Frg/Trg System Kit... YK028 FinishPro 2XP...Piston Stop Kit... YK0282 FinishPro 2...Repair Kit... YK094 FinishPro Mg...Repair Kit... YK08 FinishPro...Repair Kit... YK06 FinishPro 4XP, 42XP...Frg/Trg System Kit... YK06 FinishPro 4XP, 42XP...Piston Stop Kit... YK062 FramePro 60, 602, 6, 62...Repair Kit... YK060 FramePro XP 0, 2, 02, 2...Frg/Trg System Kit... YK024 FramePro XP 0, 2, 02, 2...Piston Stop Kit... YK0244 HN0, HN20...Repair Kit... BA08 JoistPro0XP...Repair Kits... YK082, YK824 JoistPro20XP...Repair Kits... YK082, YK0826 LSXP...Repair Kit... YK088 MW...Repair Kit... YK0 PALF...Repair Kit... YK0446 PAL0...Repair Kit... YK044 PAL90...Repair Kit... YK04 PAL00...Repair Kit... YK0 PW0, PW200...Repair Kit... YK0402 PW0R...Repair Kit... YK040 RoofPro 4XP...Frg/Trg System Kit... YK0424 RoofPro 4XP...Piston Stop Kit... YK042 RoofPro 40...Repair Kit... YK0426 SC...Repair Kit... YK00 SC2...Repair Kit... YK0 SCN48...Repair Kit... YK069 SCN49...Repair Kit... YK0 SCN60, SCN6...Repair Kit... YK066 SFN, SKS, SPS...Repair Kit... YK06 SFN, SKS, SPS...Retrofit Kit... Yj00 SFN0...Repair Kit... YK068 SFN40...Repair Kit... YK06 SFT0XP, SFT0XP D/L, SFT0XP Long Nose..Piston Stop Kit... YK0802 SFT0XP, SFT0XP D/L, SFT0XP Long Nose...Kit Frg/Trg System Kit... YK080 SFT0XP (Auto)...Piston Stip Kit... YK0802 SFT0XP (Auto)...Kit Frg/Trg System Kit... YK0804 SFT0XP (Auto D/L)...Piston Stip Kit... YK0802 SFT0XP (Auto D/L)...Kit Frg/Trg System Kit... YK0804 SFW09...Repair Kit... YK0 SFW0XP...Piston Stop Kit... YK02 SFW0XP...Frg/Trg System Kit... YK022 SLP20...Repair Kit... YK0 SLS, SLS8...Repair Kit... YK09 SLSMg, 8Mg...Repair Kit... YK080 SLS20...Repair Kit... YK02 SLS2XP...Piston Stop Kit... YK029 SLS2XP...Frg/Trg System Kit... YK09 SCP40XP...Frg/Trg System Kit... YK0444 SCP40XP...Piston Stop Kit... YK044 SN90XP, SN902XP, FramePro2XP...Frg/Trg System Kit... YK0444 SN90XP, SN902XP, FramePro2XP...Piston Stop Kit... YK044 SN9XP, SN92XP...Frg/Trg System Kit... YK0444 SN9XP, SN92XP...Piston Stop Kit... YK068 SNS40...Repair Kit... YK04 SNS4...Repair Kit... YK042 SNS4 (Retrofit Kit)...Cap/Firing valve... YJ004 SNS44XP...Frg/Trg System Kit... YK042 SNS44XP...Piston Stop Kit... YK0422 SNS4XP...Frg/Trg System Kit... YK020 SNS4XP...Piston Stop Kit... YK02 SNS0XP, SQSXP...Repair Kit... YK0 SNS200XP-BST...Frg/Trg System Kit... YK088 SNS200XP-BST...Piston Kit... YK089 SNS200XP...Frg/Trg System Kit... YK0840 SNS200XP...Piston Kit... YK084 SNS200XP...Block Out Kit... YK080 SNS200XP...Siding Safety Kit... HC048 WC0RXP, WC0XP, WC200XP...Repair Kit... YK08 WC0RXP, WC0XP, WC200XP...Block Out Kit... YK08 WC0XP.../4" Staples Block Out Kit... YK086 WC0RXP, WC0XP, WC200XP...Retrofit Kit Solid Safety... YJ00 See tool parts chart for complete list of available individual parts. Download SENCO tool parts charts at Item Code Description s Used page G00N... FramePro 60 Framing Nailer ((0º-4º)...2" Thru -/2"... U002N... FinishPro 8Mg 8 gauge Brad Nailer..." Thru 2-"... 8 W002N... SLS 8Mg 8 gauge (L wire /4" crown), w/case..." Thru -"... 2 X020N... FinishPro 2, 6 gauge, Finish Nailer, w/case...-/4" Thru 2-/2"... 2C000N... FinishPro 0, 2 gauge Micro Pinner.../2" Thru " D00N... FinishPro 2N, 8 gauge, w/case... " -/4" Brads, /2" " Staples N... SCXP Senclamp.../6" Thru 9/6"... C000N... RoofPro 40 Roofing Coil Nailer.../4" Thru -/4"... 8 D00N... RoofPro 4XP Roofing Coil Nailer.../4" Thru -/4"... 8 L000N... SNS4-6 gauge. (O/N wire /6" crown) w/case..." Thru 2"...20, N... SKSXP -L 8 gauge ( L wire /4" crown).../4" Thru -/2" N... SKSXP-M 8 gauge (M wire " crown)... /4" Thru -/2" N... SKSXP-N 6 gauge (N wire /6" crown)... /4" Thru -/2" A000N... BC8 Button Cap Stapler, w/case..." staple into " button C000N... SFW09 22 gauge (C wire " crown).../2" Thru " N... SCXP Senclamp, Cycle-thru restricted trigger.../6 Thru 9/6... 4G000N... FinishPro 42XP ga Finish Nailer, w/case...-/4" Thru 2-/2"... 4H00N... FramePro2FRHXP...2" Thru -/4" L000N... PalletPro FXP Coil Nailer..." Thru 2-/4"...2 4W000N... WC0XP 6 gauge (P wire " crown)..." Thru -/2" X000N... WC0RXP Roofing 6 gauge (P wire " crown)..." Thru -/2" Y000N... WC200XP Lathing 6 gauge (P wire " crown)..." Thru 2" Z00N... FP2XP Framing Nailer (0º-4º)...2 Thru -/ N... SLP20XP 8 gauge Brad Nailer, w/case... " Thru -" N... SC2XP Corrugated Tool.../4" Thru /2" N... SLS20XP-M 8 gauge (M wire " crown) Sencomatic.." Thru -/2" N... SLS20XP-K 9 gauge (K wire /4" crown)... /2" Thru " N... SLS20XP-L 8 gauge ( L wire /4" crown)... " Thru -/2" N... SLS20XP-L 8 gauge (L wire /4" crown) w/case... " Thru -/2" N... SLS20XP-L 8 gauge ( L wire /4" crown) Sencomatic... " Thru -/2" N... SLS20XP-M 8 gauge (M wire " crown)... " Thru -/2" N... SLS20XP-R 9 gauge (R wire /6" crown).../2" Thru " N... SLS20XP-HF Hardwood Flooring 9 ga. (R wire /6" cr.).." Thru "...4 A000N... SN92XP Framing Nailer (full round head)...2-" Thru -/2"..., 20 B000N... SN9XP Framing Nailer (0º-4º)...2-" Thru 4"... 2 J000N... SCN49XP Siding Coil Nailer...-/4 Thru 2-/2"...20, 2 L000N... PalletProXP00 Coil Nailer...2-/4" Thru 4" M000N... PalletProXP0 Coil Nailer..." Thru " N000N... FUSION F- Battery ga. 4º Finish Nailer, w/case...-/4" Thru 2-/2"... P000N.... FUSION F-6A Battery 6 ga. 20º Finish Nailer, w/case..-/4" Thru 2-/2" N... SCN60XP Coil Nailer...2" Thru 2-/4" N... SCN6XP Coil Nailer...2" Thru -/2" N... SCN6XP Coil Nailer, Toenail Safety...2" Thru -/2" E000N... FUSION F-8 Battery 8 gauge Brad Nailer, w/case..." Thru 2-"... 4 GF000N... FinishPro Mg 6 gauge 20º Finish Nailer, w/case...-/4" Thru 2-/2" G000N... FinishProMg gauge 4º Finish Nailer, w/case...-/4" Thru 2-/2" K000N.... JoistPro20XP Metal connector nailer /2" Thru 2-/2" S000N... SFT0XP-A/D 22 gauge (A/D wire /6 crown).../4" Thru " S00N... SFT0XP-A/D Auto 22 gauge (A/D wire /6 crown).../4 Thru S00N... SFT0XP-A/D Auto 22 gauge (A/D wire /6 crown)... /4" Thru " S02N... SFT0XP-B D/L 22 gauge (B wire /2 crown)... /4" Thru /2" Item Code Description s Used page 6S0N... SFT0XP-B D/L 22 gauge (B wire /2 crown)..../4" Thru /2" S00N... SFT0XP-B Auto D/L 22 gauge (B wire /2 crown).../4" Thru /2" S002N... SFT0XP-C 22 gauge (C wire " crown).../2" Thru " S02N... SFT0XP-C Auto 22 gauge (C wire " crown)..../2" Thru " S022N... SFT0XP-C D/L 22 gauge (C wire " crown).../2" Thru " S02N... SFT0XP-C Auto D/L 22 gauge (C wire " crown).../2" Thru " S042N... SFT0XP-C Long nose 22 gauge (C wire " crown)..../2" Thru " S00N... SFT0XP-E 20 gauge (E wire /6" crown)...." Thru " S004N... SFT0XP-F 20 gauge (F wire /2" crown)..../4" Thru /2" S04N... SFT0XP-F Auto 20 gauge (F-wire /2" crown).../4" Thru /2" S00N... SFT0XP-G 20 gauge (G wire crown).../4" Thru " S02N... SFT0XP-G D/L 20 gauge G wire crown).../4" Thru " S0N... SFT0XP-G Auto D/L 20 gauge (G wire crown)..../4" Thru " S06N... SFT0XP-H Auto D/L 20 gauge (H wire /6 crown)...." U000N... FUSION F-6S Battery 6 ga. Finish Nailer, w/case..../4" Thru 2-/2" X0002N... SG RPM Screwdriver...Bulk Screws X0004N... SG RPM Screwdriver...Bulk Screws W000N... DS220 Auto-Feed Screw Driver Attachment... Thru W000N... DS20 Auto-Feed Screw Driver Attachment... Thru W00N... DS440AC Auto-Feed Screw Driver Attachment Kit... Thru W002N... DS42AC Auto-Feed Screw Driver Attachment Kit.... Thru N.... SFN0 gauge Finish Nailer, w/case..." Thru 2" N... SQSXP gauge (Q wire /6" crown)...-/4" Thru 2-/2"... B000N... SNS200XP, 6- gauge (O &N wire /6 crown)..." Thru 2"...20, C000N... SNS200XP-BST, 6- gauge (O &N wire /6 crown)..." Thru 2"... 20, J000N... SCP40XP Pneumatic Concrete and Steel Pinner.../2" Thru -/2"... L000N... JoistPro0XP Joist hanger nailer...-/2"... 4 T000N... DS2-AC Auto-Feed Screw Driver Thru U000N... DS22-AC Auto-Feed Screw Driver... Thru V000N... DS2-AC Auto-Feed Screw Driver... Thru...44 W000N... DS2-8v Auto-Feed Screw Driver... Thru X000N.... DS22-8v Auto-Feed Screw Driver... Thru Y000N.... DS2-8v Auto-Feed Screw Driver... Thru N... FinishPro2XP, 8 Gauge Brad Nailer, w/case..." Thru 2-"... 8C000N... SLS0Mg-L 8 gauge (L wire /4 crown).../2 Thru -9/ D000N... SHF200 Hardwood Flooring Nailer...-/2 Thru D0002N... SHFS200 Hardwood Flooring Stapler.../2 Thru F000N... FinishPro2SXP, 2 gauge Headless Pinner, w/case.../2 Thru H000N... DFPXP Staples Clinch tool 20 gauge (F wire /2 crown.../6 Thru /2... 8J000N... FSXP Staples Sisal Anvil tool 8 gauge (J wire /6 crown /6 Thru... 8J0002N... FLXP Staples Clinch tool 8 gauge (J wire /6 crown../6 Thru... 8L000N... FinishPro2LXP, 2 gauge Headless Pinner, w/case..../2 Thru M000N... FinishPro2LXP, 2 gauge Medium Head Pinner, w/case.. Thru N... SLS2XP-L 8 gauge (L wire /4" crown)...." Thru -/2" N... SLS2XP-M 8 gauge (M wire " crown)...." Thru -/2" MA00... Vinyl Siding attachment for RoodPro4XP (D00N).../4" Thru -/4"... 8 PC A Stapling Hammer 20 gauge (H wire /6" crown)..."... 9 PC08... A20 Hand Nailer...2" Thru "... PC ga. Brad Nailer & Compressor Kit...." Thru 2"... 6 PC FinishPro 0 Micro Pinner Compressor Kit..../2" Thru "... 6 PC9... Mini Hand Nailer...2" Thru -/2"