RTA-3520 DIMENSIONS MAXIMUM WEIGHT CAPACITIES. Product Size: 47.5"W x 23"D x 30"H
|
|
- Frederick Burns
- 5 years ago
- Views:
Transcription
1 MODEL RTA Thanks for purchasing one of our products. Please read carefully the assembly instructions before the installation. Please save this manual for future reference. Complete video assembly demonstration is available at: MODEL RTA-3520
2 RTA-3520 DIMENSIONS Product Size: 7.5"W x 23"D x 30"H MAXIMUM WEIGHT CAPACITIES DO NOT exceed this limit Please use care and good judgement when placing objects on wood surface
3 RTA-3520 P.3 PARTS LIST Left Panel Middle Panel Studs Top Panel X 2 Horizontal Panel Bottom Panel Back Panel Front Base Panel Side Structure Right Panel Back Structure Main Panel Right Left X X 1 SET X 2 Keyboard Panel Slider Base Keyboard Slider Support Tubes
4 RTA-3520 P X 3 X 3 X 3 X 3 Drawer Left Panel Drawer Right Panel Drawer Front Panel Drawer Bottom Panel 21 X 3SET Left Right Left Right X 3 Drawer Back Panel Drawer Slider Handle X 3 LIST PART QTY. ITEM PART QTY. ITEM A 2 3X15 MM I 2 6X60 MM B 26 6X0 MM J X35 MM C 6X75 MM K 6 X20 MM D 6X35 MM L 2 E 2 6X25 MM 1 F 6X MM G X MM H X1 MM
5 RTA-3520 P.5
6 RTA-3520 P.6
7 RTA-3520 P.7 ASSEMBLY STEPS: Complete video assembly demonstration is available at: PCS 22 3PCS Left Right A 3X15 MM PCS Grab all the flat shaped Drawer Sliders (22) and set aside the L shaped ones. With the Left & Middle Panels (1&2) oriented as illustrated, assemble the flat sliders (22) to the holes on their inside faces. The wheels will be located at the front and facing down Detailed instructions on PAGE 5 TOP OF PANEL B 6X0 MM 5PCS Join the Front Base Panel (8) to the Bottom Panel (6) by inserting the wood pins of (8) into the holes of (6) as shown. Screw the Bolts (B) to the corresponding holes on the inside face of Left Panel (1), then assemble to it the Horizontal Panel (5), Bottom Panel (6) and Small Front Panel (8) by turning all the corresponding cam locks Slide in the Back Panel (7) thru the channels in between the Horizontal Panel (5) and Bottom Panel (6) as shown. Make sure the panel fits inside all the channels.
8 RTA-3520 P.8 2 Detailed instructions on PAGE 5 Screw the Bolts (B) to the corresponding holes on the inside face of Middle Panel (2), then assemble the Middle Panel (2) to the Horizontal Panel (5), Bottom Panel (6) and Front Base Panel (8) by turning all the corresponding cam locks B 6X0 MM 5PCS Screw the Bolts (B) to the corresponding holes on the inside face of Top Panel (), then assemble it to the cabinet by turning the corresponding cam locks. Detailed instructions on PAGE 5 B 6X0 MM PCS Use Screws (C) to assemble the Right Panel (10) to the Side Structure (9). Please refer to PAGE 6 to troubleshoot this step. Screw the Studs (3) to the Side Structure (9). C 6X75 MM PCS 9 3 2PCS
9 RTA-3520 P.9 8 E D D 6X35 MM 2PCS Use Screws (D & E) to assemble the Back Structure (11) between the Middle Panel (2) and Side Structure (9). E 6X25 MM 2PCS PCS 1 PCS Right Left Use Screws (F) to affix the Slider Bases (1) to the Main Panel (). F 6X MM PCS Use Screws (G) to fix the Keyboard Slider (15) to the Slider Bases (1) as illustrated. Please note the position of the tabs on the sliders. G X MM PCS 11 Use Screws (H) to affix the Support Tubes (16) to the Main Panel (). 16 2PCS H X1 MM 8PCS
10 RTA-3520 P.10 L 2PCS I D D I 9 Place the plastic washer (L) in between the Top Panel () and Support Tubes (16), and assemble the Main Panel () using screws (D) on the LEFT and (I) on the RIGHT. I D 6X60 MM 6X35 MM 2PCS 2PCS 13 Use Screws (H) to assemble the Keyboard Panel (13) to the Keyboard Slider (15) H X1 MM PCS Screw Bolts (B) to the holes on the inside face of Drawer Front Panel (), then assemble the Drawer Left & Right Panels (17 &18) as shown by turning the cam locks Detailed instructions on PAGE 5 B 6X0 MM PCS Slide in the Drawer Bottom Panel (20) thru the channels in between panels (17) & (18) as shown. Make sure the panel fits inside all the channels.
11 RTA-3520 P Assemble the Drawer Back Panel (21) between the Drawer Left & Right Panels (17&18) using Screws (J) as shown J X35 MM PCS Place the drawer upside-down. Grab the L shaped sliders (22) and assemble them to the drawer using Screws (A), with wheels facing towards the back of the drawer. Make sure the sliders are touching the side panels, and that they are not up in the air. A 3X15 MM PCS Assemble the Handle (23) to the Drawer Front Panel () using Screws (K) as shown. PLEASE REPEAT STEP 1 TO FOR OTHER TWO DRAWERS K X20 MM 2PCS Carefully insert all the drawers starting from the bottom. Make sure the wheels from the drawers engage and roll in the middle of the sliders.
12
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS MODEL RTA - 4985 Thanks for purchasing one of our products. Please read carefully the assembly instructions before the installation. Please save this manual for future reference.
More informationThanks for shopping with Improvements! Wellesley Cart with Gate Leg Desk Extension Item #504992
Thanks for shopping with Improvements! Wellesley Cart with Gate Leg Desk Extension Item #504992 To order, call 1-800-642-2112 West Chester, OH 45069 Made in China PR-1015 If you have questions regarding
More informationWhite Black Espresso Corner Desk Assembly Instructions
White Black Espresso Corner Desk Assembly Instructions Page 1 White / Black / Espresso Corner Desk Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on
More informationItem # Thanks for shopping with Improvements!
Thanks for shopping with Improvements! Hampshire -Door Cabinet Item #5505 To order, call -800-64- West Chester, OH 45069 Made in China PR-6 If you have questions regarding this product, call -800-64- Mon.-Fri.
More informationTHANK YOU FOR PURCHASING OUR STUDIO RTA PROJECT STATION
THANK YOU FOR PURCHASING OUR STUDIO RTA MODEL# 50040 BLACK/MAPLE, 50042 PEWTER/CHERRY IF YOU REQUIRE ANY ASSISTANCE WITH ASSEMBLY, PARTS, OR INFORMATION ON OTHER PRODUCTS, PLEASE VISIT OUR WEBSITE: www.studiorta.com
More informationThanks for shopping with Improvements! Mandarin Tansu Step Cabinet Item #512735
Thanks for shopping with Improvements! Mandarin Tansu Step Cabinet Item #512735 This unit can be assembled so the top and middle cabinets are on the left or on the right. Use these instructions for a right-sided
More informationThanks for shopping with Improvements! Chapin Secretary Desk Item #398643
Thanks for shopping with Improvements! Chapin Secretary Desk Item #398643 Note: You will receive this desk in two boxes. To order, call 1-800-642-2112 West Chester, OH 45069 Made in China 1111 If you have
More informationPedestal Desk IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches
88 5549 181 Pedestal Desk IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have taken
More informationWellington Wallbed 700 Series Assembly Instructions
Wellington Wallbed 700 Series Assembly Instructions 1. Read all instructions before proceeding. Not following instructions may result in personal harm or damage to the furniture. 2. 2 people are required
More informationThanks for shopping with Improvements! Hamper Cabinet with Drawer Item #512188
Thanks for shopping with Improvements! Hamper Cabinet with Drawer Item #512188 IMPORTANT: Since the bin pivots forward, this unit must sit on the floor for safety reasons. Other items of the same width
More informationWellesley Gift Wrap Station
Thanks for shopping with Improvements! Wellesley Gift Wrap Station Item #504054 Note: Read these instructions carefully before assembling. Tools required: Phillips screwdriver, flat screwdriver. Find a
More informationBarnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratch
88 5516 653 Barnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have
More informationCopyright 2010, by Walker Edison Furniture Co., LLC. All rights reserved.
General Assembly Guidelines I. Insure that all parts and hardware are available before beginning assembly. II. III. IV. Follow each step carefully to insure the proper assembly of this product. Two people
More informationList of Parts: List of Hardware: Assembly Instructions for Adjustable Height Executive Desks Y11741-Y11752 A B C. ControlUnitBracket.
www.modernofficefurniture.com Assembly Instructions for Adjustable Height Executive Desks Y11741-Y11752 List of Parts: ControlUnitBracket : Hardware Bag Front cross beam List of Hardware: A B C D Qty 19
More informationKitchen Work Cabinet Item #377635
Thanks for shopping with Improvements! Kitchen Work Cabinet Item #377635 To order, call 1-800-642-2112 West Chester, OH 45069 Made in Thailand 0912 Rev B If you have any questions regarding this product,
More informationKA327700TX MARTINVILLE KITCHEN CART - White Assembly Instructions
KA327700TX MARTINVILLE KITCHEN CART - White Assembly Instructions For assistance with assembly contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com www.seidal.com MARTINVILLE
More informationThanks for shopping with Improvements! Stafford Entryway Bench Item #547396
Thanks for shopping with Improvements! Stafford Entryway Bench Item #547396 Note: Read these instructions carefully before assembling. Tools required: Philips screwdriver (not included) Find a clean, smooth
More informationThanks for shopping with Improvements! Rolling Kitchen Storage Cart with Wood Top Item #583649
Thanks for shopping with Improvements! Rolling Kitchen Storage Cart with Wood Top Item #58349 Note: Read these instructions carefully before assembling. Tools required: Philips screwdriver (not included).
More informationThanks for shopping with Improvements! Dover Rolling Cart Item #583244
Thanks for shopping with Improvements! Dover Rolling Cart Item #58344 Note: Read these instructions carefully before assembling. Tools required: Philips screwdriver (not included). Find a clean, smooth
More informationRYAN 6 DRAWER TALLBOY PARTS LIST
RYAN 6 DRAWER TALLBOY Congratulations on your purchase of your RYAN 6 DRAWER TALLBOY. The RYAN Collection is made in New Zealand from 100% New Zealand made MDF an environmentally sound and renewable resource.
More informationRYAN 5 DRAWER LINGERIE CHEST
RYAN 5 DRAWER LINGERIE CHEST Congratulations on your purchase of your 5 DRAWER LINGERIE CHEST. The RYAN Collection is made in New Zealand from 100% New Zealand made MDF an environmentally sound and renewable
More informationFor additional assistance call
The following pages will help guide you through the process of assembling your new 48 custom prize wheel. Choose an assembly area with plenty of room to lay your pieces on the floor and also a bench or
More information#916 CLASSIC 16 GUN CABINET ASSEMBLY INSTRUCTIONS
Thank you for purchasing this quality product. A list of PARTS and INSTRUCTIONS is included to assist you. Unpack and identify all parts included on the Parts List and Hardware List. If parts are missing,
More informationThanks for shopping with Improvements! Louvered Pedestal Sink Cabinet Item #512042
Thanks for shopping with Improvements! Louvered Pedestal Sink Cabinet Item #512042 Note: Read these instructions carefully before assembling. Tools required: Philips screwdriver (not included). Find a
More informationHampshire Buffet Cabinet with Glass Doors
Thanks for shopping with Improvements! Hampshire Buffet Cabinet with Glass Doors Item #55919 Note: Read these instructions carefully before assembling. Tools required: Philips screwdriver (not included).
More informationLOCK ASSEMBLY INSTRUCTIONS
LOCK ASSEMBLY INSTRUCTIONS Use the drawing below as a key to determine which lock assembly instruction to follow. There are three different types of locks used, and the instructions for each are on the
More informationColonial Classic Bar
88 5528 991 Colonial Classic Bar IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts.
More informationASSEMBLY INSTRUCTIONS MANUAL
PAGE 1 OF 9 RECOMMENDED TOOLS FOR ASSEMBLY: ALLEN WRENCH (INCLUDED) BOX WRENCH (INCLUDED) PHILLIPS SCREW DRIVER (NOT INCLUDED) PARTS IN CARTON: ALLEN WRENCH SCREWS (20 EACH) ROUND HEAD SCREWS (8 EACH)
More informationThanks for shopping with Improvements! Providence Storage Bench Item #567493
Thanks for shopping with Improvements! Providence Storage Bench Item #5679 To order, call -800-6- West Chester, OH 5069 Made in China PR-06 If you have questions regarding this product, call -800-6- Mon.-Fri.
More informationCorner Desk Assembly Instruction PO# HO664200TX White. HO664300TX Black. HO664400TX- Espresso
HO664200TX White HO664300TX Black HO664400TX- Espresso Corner Desk Assembly Instruction For assistance with assembly contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com
More informationPIVOT BUFFET HARDWARE TOOLS REQUIRED COMPONENTS. 8 - cams 8 - cam screws bolts 44 - flat washers shelf pins.
PIVOT BUFFET HRDWRE 8 - cams 8 - cam screws 44 - bolts 44 - flat washers 44 - spring washers 8 - screws 16 - shelf pins Thank you for purchasing the Pivot Buffet. This page lists all the contents included
More informationM. Door 1 Pc. 1 Pc. Door 1 Pc. 1 Pc. M3x20 Wood Screw (long) 8 Pcs. (+1 extra) M3x10 Wood Screw for Magnet 8 Pcs. (+1 extra)
88 5516 653 Barnside Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have
More informationAssembly Instructions
Claremont Convertible Media Fireplace FA9316R0TX-Brown Mahogany Assembly Instructions For assistance with assembly contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com
More informationTennyson Fireplace. FA8545ARTX- Classic Espresso. Assembly Instructions
Tennyson Fireplace FA8545ARTX- Classic Espresso Assembly Instructions For assistance with assembly contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com www.seidal.com 1
More informationASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS UltraHD Lighted Workcenter (Model No. 20247) 48 in W X 24 in D X 65.5 in H (1.21 m x 60.9 cm x 1.66 m) TR140410 PARTS LIST (pg 1 of 8) Please check the parts carefully according to
More informationThanks for shopping with Improvements! Slanted Shoe Shelves Item #512142
Thanks for shopping with Improvements! Slanted Shoe Shelves Item #512142 Note: Read these instructions carefully before assembling. Tools required: Philips screwdriver (not included). Find a clean, smooth
More informationThanks for shopping with Improvements! Serena File Cart with Charging Station Item #513376
Thanks for shopping with Improvements! Serena File Cart with Charging Station Item #513376 Note: Read these instructions carefully before assembling. Tools required: Philips screwdriver (not included).
More informationASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS ITEM No. :Quilty/ 3 A helpful Assembly Video can be found on www.arrowcabinets.com in the Video Section under Quilty Incorrect Correct The turning direction of attaching The arrow
More informationBY ALIEN TECHNOLOGIES CORP
BY ALIEN TECHNOLOGIES CORP Assembly Instructions TopLift Pros YOU MAY ALSO REVIEW OUR ASSEMBLY VIDEO, PLAY AND PAUSE AT YOUR CONVENIENCE. JUST VISIT US AT WWW.TOPLIFTPROS.COM AND GO TO Customer Support
More informationBASE 4 DRAWER UNIT ASSEMBLY GUIDE
ISO 001 LicQEC0756 ASSEMBLY GUIDE BASE 4 DRAWER UNIT IMPORTANT Before Commencing Assembly: Read all instructions COMPLETELY Ensure all listed parts are present (if any parts are missing please contact
More informationStar Trac Turbo Trainer Assembly & Setup
Star Trac Turbo Trainer Use the following procedures to unpack and assemble your Turbo Trainer manufactured by Star Trac. UNPACKING AND PARTS LIST Position the shipping carton so the Heavy End logo is
More information400A 40113V, 401A 40120V, & 401AL 40120VL ALUMINUM VERTICAL 4000 LB LIFT INCLUDES SCREW LEG ASSEMBLY INSTRUCTIONS
12/11/07 PAGE 1 OF 12 400A 40113V, 401A 40120V, & 401AL 40120VL ALUMINUM VERTICAL 4000 LB LIFT INCLUDES SCREW LEG ASSEMBLY INSTRUCTIONS Thank you for purchasing our product! *Please read these instructions
More informationIAC INDUSTRIES 895 BEACON STREET BREA, CA Phone (714) Fax (714) Workmaster Assembly Instructions
INDUSTRIES WORKMASTER SERIES Part #1 REV. (022011) IAC INDUSTRIES 895 BEACON STREET BREA, CA 92821-2926 Phone (714) 990-8997 Fax (714) 990-0557 www.iacindustries.com Workmaster Assembly Instructions Table
More informationHZ8864A0TX / HZ8864B0TX. Metal/Glass Sliding-Door Display Cabinet. Assembly Instructions PO: Each shelf supports up to lb.
HZ8864A0TX / HZ8864B0TX Metal/Glass Sliding-Door Display Cabinet Assembly Instructions For assistance with assembly, contact: Southern Enterprises Inc. Customer Service: 1-800-633-5096 service@seidal.com
More informationINSTALLATION INSTRUCTIONS
NOTE: Bolts should remain hand tight until all bolts are installed. STEP 1 Installing the door base (both sides). 1. Locate the outer, roll cage, mounting bolt (passenger side is shown in the illustration).
More informationRH-412 STEEL DOORS INSTALLATION INSTRUCTIONS
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.
More informationINSTALLATION INSTRUCTIONS RH 412 STEEL DOORS
By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side. Note: Having the hood open makes the job
More informationINSTALLATION INSTRUCTIONS DODGE RAM 2 & 4WD 1500 PART # P5058
INSTALLATION INSTRUCTIONS 2009-13 DODGE RAM 2 & 4WD 1500 PART # P5058 PARTS LIST: Qty Description Qty Description 1 Grille Guard 12 12-1.75mm Hex Nuts 2 Upper Frame Mounting s (for trucks without tow hooks
More informationINSTALLATION INSTRUCTIONS GRILLE GUARD RAM 1500 PART # 5058/5058-2
INSTALLATION INSTRUCTIONS GRILLE GUARD PART # 5058/5058-2 PARTS LIST: Qty Description Qty Description 1 Grille Guard 8 12-1.75mm x 35mm Hex Bolts 2 Upper Frame Mounting s (for trucks without tow hooks
More informationFollow these steps to assemble your Hiddenbed 1 Construct the 3 main parts 2 Assemble them together 3 Add a mattress. YOUR HIDDENBED IS READY! 2
Mounting Instructions Item No.: 271.97.300 Hiddenbed Furniture parts supplied by the customer Follow these steps to assemble your Hiddenbed 1 Construct the 3 main parts 2 Assemble them together 3 Add a
More informationC PART LIST HARDWARE LIST. Kitchen Cart IMPORTANT NOTE
88 9200 006C Kitchen Cart IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken
More informationThanks for shopping with Improvements! Laundry Folding Table with 3 Clothes Hampers Item #
-- Thanks for shopping with Improvements! Laundry Folding Table with 3 Clothes Hampers Item # 568376 Note: Read these instructions carefully before assembling. Tools required: Philips screwdriver (not
More information4-Piece Table Tennis Table
Item# 45-6074 4-Piece Table Tennis Table Please keep this instruction manual for future reference If you have any problems with your new product, please contact Triumph Sports USA at 1-866-815-4173, or
More informationv1.0 ASSEMBLY GUIDE Mia Wide Bookcase
v1.0 ASSEMBLY GUIDE Mia Wide Bookcase Components Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase.
More informationO-Sullivan King 4 Poster Bed O-Sullivan Queen 4 Poster Bed Parts and Hardware List
Parts and Hardware List A. Left Headboard Post 1 pc B. Right Headboard Post 1 pc C. Left Footboard Post 1 pc D. Right Footboard Post 1 pc E. Headboard Panel 1 pc F. Footboard Rail 1 pc. Spindles 4 pcs
More informationVertical Offset Base and Safety Rail System Installation Instructions
Section 5 Vertical Offset Base and Safety Rail System Installation Instructions The vertical offset base and safety rail assembly are designed to be used in residential construction for sloped or flat
More informationHZ487300TX Javu 2-Drawer Storage
HZ487300TX Javu 2-Drawer Storage Assembly Instructions For assistance with assembly contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com www.seifurniturestore.com Page
More informationFLAT PANEL CART WITH OR WITHOUT A PULL OUT SHELF
FP42UL FP60UL FP42MUL FP60MUL FLAT PANEL CART WITH OR WITHOUT A PULL OUT SHELF WARNING: FP42 carts are intended to hold monitors up to 75 lbs and FP60 carts are intended to hold monitors up to 100 lbs.
More informationShowpiece Cabinet Integrated Stand For 32" - 52" LCD HDTV
Showpiece Cabinet Integrated Stand For 32" - 52" LCD HDTV Installation and Assembly Instructions 2009 Incredible Technologies Inc. Version 0109 Showpiece Cabinet Integrated Stand for 32" - 52" LCD HDTV
More informationHomestead Bar Cabinet IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent s
88 5527 991 Homestead Bar Cabinet IMPRTANT NTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts.
More informationDisplay-Top Apothecary Cabinet. Assembly Instructions. Page 1
Display-Top Apothecary Cabinet Assembly Instructions Page 1 Display-Top Apothecary Cabinet Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean,
More information#709 Magnum Shear Stand
#709 Magnum Shear Stand Mounting Brackets Sold Separately Operators Manual Assembly Operation Parts List Warnings Bullet Tools 800-406-8998 3390 W. Hayden Avenue, Hayden, ID 83835 www.bullettools.com Congratulations
More informationThanks for shopping with Improvements! Providence Shoe/Boot Bench Item #457353
Thanks for shopping with Improvements! Providence Shoe/Boot Bench Item #457353 Note: Read these instructions carefully before assembling. It will help you become familiar with the parts and construction.
More informationBX1956 Installation Instructions Chrysler PT Cruiser (Include Turbo)
BX1956 Installation Instructions 2001-04 Chrysler PT Cruiser (Include Turbo) Serial No. The front fascia and metal bumper are removed for baseplate installation. Factory metal bumper will not be reinstalled.
More informationA. Top Unit 1 Pc. For assembly see instructions in carton:
88 5005 9441 Kitchen Island IMPRTANT NTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have taken
More informationLeft Unit. G. Shelf 1 pc. Small Cam Lock 6 pcs.(+1 extra) Cam Lock Screw 2 pcs.(+1 extra) Cam Lock Screw 6 pcs.(+1 extra)
88 5180 181 Art & Craft Computer Desk (Cottage Oak) IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring
More informationMODEL T28173/T28174 ROLLER TABLES INSTRUCTIONS
MODEL T28173/T28174 ROLLER TABLES INSTRUCTIONS FOR MODELS MFD. SINCE 10/17 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Rails Rollers Reversible
More information-- Gym Glide -- (Recreational Game Standard) Installation Instructions
-- Gym Glide -- (Recreational Game Standard) Installation Instructions Call Jaypro Sports Equipment at 1-800-243-0533 during regular business hours for technical support. www.jaypro.com Rev- Page 1 of
More informationFloating Headboard & Nightstand System. Assembly Instructions. Model # Queen: HHQ K King: HHK K. Required Tools
Assembly Instructions DATE STAMP CONTACT US FIRST parts@prepacmfg.com 1-877-PREPAC1 1-877-773-7221 Mon - Fri 7am - 4pm PST 10am - 7pm EST Floating Headboard & Nightstand System Model # Queen: HHQ-0520-2K
More informationASSEMBLY GUIDE. Mia Narrow Bookcase
ASSEMBLY GUIDE Mia Narrow Bookcase Components: Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase. Step
More informationAgri-Fab OWNERS MANUAL MODEL NO CU. FT. FARM/YARD CART. CAUTION: Read Rules for Safe Operation and Instructions Carefully
Agri-Fab OWNERS MANUAL MODEL NO. 45-01772 CAUTION: Read Rules for Safe Operation and Instructions Carefully 14 CU. FT. FARM/YARD CART Safety Assembly Operation Maintenance Parts the fastest way to purchase
More informationThanks for shopping with Improvements! Essex Tilt-Out Shoe Bench Item #513134
Thanks for shopping with Improvements! Essex Tilt-Out Shoe Bench Item #513134 Note: Read these instructions carefully before assembling. Tools required: Philips screwdriver (not included). Find a clean,
More informationThank you for purchasing out product! *Please read these instructions and follow them step by step. *
Page 1 of 7 AD17 AA DS 4 X 16 T12 Thank you for purchasing out product! *Please read these instructions and follow them step by step. * STEP 1. Slide two support posts (REF. # 24) into the two outside
More informationAssembly Instruction Item No. : HF SKU No. : Description: 48IN CHERRY CORNER FIREPLACE
ssembly Instruction Item No. : H170192 SKU No. : 810392478 Description: 48IN HRRY ORNR IRPL Option Option To prevent serious injury or death, this product is equipped with a wall anchoring system. efore
More information200A FLB VERTICAL 22113V LIFT W/CHAIN DRIVE WINCH
PG. 1 OF 11 PORTA-DOCK, INC. 200A FLB VERTICAL 22113V LIFT W/CHAIN DRIVE WINCH STEP 1. Separate and group like parts and fasteners together. Locate the winch side member with the longer upright tube and
More informationThanks for shopping with Improvements! Space-Saving Wall-Mount Drying Rack - Small Item #504668
Thanks for shopping with Improvements! Space-Saving Wall-Mount Drying Rack - Small Item #504668 Note: Read these instructions carefully before assembling. Tools required: Phillips screwdriver, flat screwdriver
More informationPantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or oth
88 5076 691 Pantry IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occurring to the parts. We have taken great
More informationThe Bowflex Revolution XP Home Gym Assembly Instructions. P/N: Rev ( /0 )
P/N: 001-7057 Rev ( /0 ) The Bowflex Revolution XP Home Gym Assembly Instructions 2 Table of Contents Before You Start... 2 Tools You Will Need / Hardware Contents... 3 Box Contents... 6 Assembling Your
More informationModular Teacher s Desk Systems
Modular Teacher s Desk Systems ssembly Instructions 1 Modular Teacher s Desk Components Part Drawing Description Qty Part Drawing Description Qty 90390 djustable Leg-1S 90369 Modular Pedestal 90391 djustable
More informationNantucket Buffet
88 5022 611 Nantucket Buffet IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts. We
More informationSentinel Series Cigar Humidor End Tables
Sentinel Series Cigar Humidor End Tables Assembly Instructions Models: Sentinel 500, 1000 and 1500 Style: Contemporary SENTINEL ASSEMBLY INSTRUCTIONS Congratulations! You have purchased a superior cigar
More informationHow to Assemble Your Solar Light & Accessories
1 How to Assemble Your Solar Light & Accessories geolitesolar.com customerservice@geolitesolar.com 2 Table of Contents 1. Put on Cotton Gloves...3 2. Assemble Base...3 3. Secure Base to Ground...4 4. Attach
More informationFor assembly see instructions in carton
88 5523 943 Kitchen Island IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occurring to the parts. We have
More informationJunior Trampoline With Handle
Junior Trampoline With Handle Model No: TRMI-0004 WARNING Read these instructions prior to assembling and using this trampoline - Warning - This trampoline is subject to a 35 kgs weight limit. Do not allow
More informationTriple Bypass System
Triple Bypass System ASSEMBLY INSTRUCTIONS TRIPLE BYPASS SYSTEM Recommended Tools Drill with 1/4 Drill Bit and Phillips Screw Bit 7/16 Combination Wrench Socket Wrench with 7/16 and 9/16 Socket Level Tape
More informationWhalen Furniture Mfg. Factory No. 5 Page # 1
If you have any questions regarding assembly or if you are missing parts, do not return this item to Sam s Wholesale Club Please call our customer service number and have your instructions and parts list
More informationframe bracket Dodge x 2 & 4 x 4 (6-1/2 & 8 Boxes Includes Mega Cab)
, Rev 4 02/19 frame bracket 8552026 Dodge 3500 4 x 2 & 4 x 4 (6-1/2 & 8 Boxes Includes Mega Cab) 14 5 7 2 4 11 9 10 17 3 6 1 8 13 15 16 18 12 ITEM PART # DESCRIPTION QTY. 1 00085.50 FLAT WASHER 10 2 00248
More informationTHANK YOU FOR PURCHASING THE M/T METAL SERIES MODULAR JK FRONT BUMPER
THANK YOU FOR PURCHASING THE M/T METAL SERIES MODULAR JK FRONT BUMPER Your safety and the safety of others is very important. Please read and understand all safety precautions before installing this or
More informationThanks for shopping with Improvements! Weatherby Corner Storage Cabinet Item #511676
Thanks for shopping with Improvements! Weatherby Corner Storage Cabinet Item #57 Note: Read these instructions carefully before assembling. Tools required: short Philips screwdriver (not included). Find
More informationHYDRAULIC CONTROL DETAILS PARTS LIST
Always give model number, serial number and part number when ordering repair parts. HYDRAULIC CONTROL DETAILS PARTS LIST REF NO. PART NUMBER DESCRIPTION 1 101939 Hydraulic Tank 2 101940 Hydraulic Tank
More informationS T E P 1. Tools Needed. Curved Needle Nose Pliers. L Shaped Tool (Supplied w/ kit) Flathead Eyeglasses Screwdriver
Curved Needle Nose Pliers Flathead Eyeglasses Screwdriver L Shaped Tool (Supplied w/ kit) Tools Needed 2 Make sure weapon is pointed in a safe direction, unloaded, and on safe. 3 Remove lower receiver
More informationStuff-Your-Stuff Platform Bed (Twin and Full)
Stuff-Your-Stuff Platform Bed (Twin and Full) Pre-Assembly: Please read all instructions before beginning assembly. Assembly by two people is a must. Save all packing materials until assembly is complete
More informationPilates IQ Reformer Set-Up
Pilates IQ Reformer Set-Up NOTE: Prior to assembly, check the parts and components you received against the following list. If you are missing any parts, please contact the Balanced Body customer service
More informationThanks for shopping with Improvements! Louvered Space Saver Cabinet Item #512059
Thanks for shopping with Improvements! Louvered Space Saver Cabinet Item #512059 Note: Read these instructions carefully before assembling. Tools required: Philips screwdriver (not included). Find a clean,
More informationRiverside. Windhaven Queen Storage Bed Assembly Instructions
Queen Storage Bed Page 1 of 7 2 pcs. 4 pcs. 4 pcs. 4 pcs. 2 pcs. 5/0 Queen Storage Bed 50773 -- 5/0 Storage Footboard w/platform Note: The 50773 Storage Footboard can be used with the 50770 Panel Headboard
More informationRiverside. Harbor Hill Queen Storage Bed Assembly Instructions
Queen Storage Bed Page 1 of 7 8 pcs. 8 pcs. 1 pc. 2 pcs. 3 pcs. 3 pcs. 4 pcs. 4 pcs. 4 pcs. 1 pc. 1 pc. 8 pcs. 8 pcs. 8 pcs. 2 pcs. 8 pcs. 1 pc. 25770 -- 4/6-5/0 Panel Headboard (NOTE: the 25775 Leather
More information4832A Installation Sheet Part List
4832A Installation Sheet Part List (1) 4016A-43-003 Qty 1- (2) 4016A-43-002 Qty 1- (3) 4016A-43-001 Qty 2- (4) 4016A-10-005 Qty 1- (5) 4016A-43-004L Qty 1- Mounting Bolt Kit (A) (K) Qty 2 - Qty 6 - M10
More informationBX2173 Installation Instructions Ford Focus (including the 2.3L engine) 2003 Ford Focus SVT
BX2173 Installation Instructions 2000-04 Ford Focus (including the 2.3L engine) 2003 Ford Focus SVT Serial No. The front fascia, coolant line bracket and anti-pollution devices are removed for baseplate
More information12 X 18 SOLARIUM ASSEMBLY INSTRUCTIONS
1218 12 X 18 SOLARIUM ASSEMBLY INSTRUCTIONS Assembly by more than one person is recommended. Base Dimensions 12 ½ x18 11, Largest Dimensions 13 6 x20 ½ (see pg.1) L:\WP51\Instructions\SOLARIUMS INSTRUCTION
More informationVersion 1.0 WIGGLES LOWBOY 3 DRAWER.
Version 1.0 WIGGLES LOWBOY 3 DRAWER Enjoy Your purchase from Australia s Best Value Furniture Store PAGE 2 Assembly checklist Read through the instructions carefully care before you y begin. g Make sure
More information