South Australian Historical Tool Association. Auction Catalogue
|
|
- Dylan Miller
- 5 years ago
- Views:
Transcription
1 South Australian Historical Tool Association 21st March 2018 "Auction of Vintage Tools" Colonel Light Gardens RSL Auction Catalogue Conditions of Sale: 1. Bidders must be financial members of SAHTA Inc. 2. Every effort is made to accurately describe each lot. The bidder must satisfy themselves by inspection. 3. All lots are sold on an "as is, where is" basis. No warranty is implied or given by SAHTA Inc. 4. The minimum initial bid on any lot will be $ The bidder with the highest bid recognised by the auctioneer at the fall of the hammer is deemed the purchaser. 6. In all matters during the auction, the auctioneer's decision will be final. 7. Payment for all items must be finalised at the end of the auction. Goods cannot be removed until "paid in full". Best of luck with bidding to all members.
2 1 Chisels - Assorted vintage - Marples 2 Miscellaneous - Pop rivet set, tap and die set 3 Plane - Stanley No. 113 compass plane 4 Miscellaneous - Assorted pliers, multigrips, tinsnips etc. 5 Spokeshaves - 4x assorted wood and metal 6 Shifters - 4x assorted - King Dick etc. 7 Saws - 1x tenon, 1x dovetail saw 8 Drills - box assorted drill bits and right angle 9 Tapes - 4x assorted tape measures 10 Chisels - 7x assorted bevel edge and firmer 11 Level - brass faced sighting level 12 Miscellaneous - wad punches, spring balance, small vice 13 Miscellaneous - assorted pliers, pincers, side cutters etc 14 Miscellaneous - assorted squares, bevels etc. 15 Miscellaneous - assorted tinsnips 16 Miscellaneous - assorted screwdrivers, turnscrews 17 Plane - 19th century infill plane 18 Saws - Large assortment of hand saws, hacksawse etc. 19 Miscellaneous - assorted folding rules, steel rules 20 Miscellaneous - assorted caliper, pushdrills, dividers etc. 21 Clamps - 4x assorted F clamps 22 Clamps - 5x assorted cast iron G clamps 23 Clamps - 4x assorted F clamps 24 Miscellaneous - assorted Stilsons, fencing pliers, shifter etc. 25 Clamps - 9x assorted small F and G clamps 26 Miscellaneous - assorted hammers, scrapers etc. 27 Plane - Stanley No. 6 fore plane 28 Planes - Stanley No. 4 and Stanley No Miscellaneous - Hatchet, axe head, hammer heads 30 Chisels - 3x Marples patternmakers gouges 31 Drawknife - approx 9" blade 32 Miscellaneous - Tin of wire brushes 33 Hammers - 3x ball pein hammers 34 Books - 3 x vintage engineering books 35 Spanners - set of ring spanners 36 Miscellaneous - Drill brace, egg beater drill, rasps, etc.
3 37 Miscellaneous - large assortment of screw drivers 38 Miscellaneous - large assortment of files - flat, round etc. 39 Miscellaneous - box of trowels, scrapers etc. 40 Miscellaneous - large assortment of spanners 41 Miscellaneous - 2x garden sieves 42 Plane - Stanley No. 78 rabbet plane 43 Miscellaneous - assorted pliers, saw sets, multigrips 44 Miscellaneous - assorted hand saws, mitre clamp etc. 45 Miscellaneous - tool tote with electric drill, screwdriver etc. 46 Hammers - 4x assorted claw etc. 47 Miscellaneous - assorted squares, steel tape etc. 48 Saws - assorted hacksaws, fretsaws etc. 49 Miscellaneous - mallet, turnscrew and soldering irons 50 Miscellaneous - assorted marking gauges 51 Saws - assorted tenon, keyhole etc. 52 Miscellaneous - assorted tinsnips, fibre cutter, nippers 53 Saw - Black and Decker 8" circular saw and blades 54 Miscellaneous - parts?draners complete with contents 55 Chisels - several in leather pouch with carver's mallet 56 Plane - beech wedge arm plough plane 57 Drill - Dawn Globe mounted post drill with electric motor 58 Saws - assorted hand, tenon, pruning saws and spare blades 59 Miscellaneous - spanners, shifters etc. 60 Planes - 6x assorted wood planes - joiner, smoother etc. 61 Planes - 5x assorted wood planes - joiner, smoother etc. 62 Miscellaneous - assorted mallets and hammers - claw, ball pein 63 Miscellaneous - assorted tape measures 64 Miscellaneous - tub of assorted sockets, spanners etc. 65 Miscellaneous - 3x assorted hatchets and 1x axe 66 Plane - Stanley No. 110 block plane 67 Planes - 1x Pope No. 4 and 1x Acorn No Planes - 1x Falcon No. 4 1/2 and 1x Stanley No Miscellaneous - Finger jointed box and contents 70 Planes - 1x Mathieson beech fore plane and 1x European smoother 71 Miscellaneous - paper guillotine 72 Miscellaneous - 4x assorted egg beater drills
4 73 Miscellaneous - files and Surform rasps 74 Plane - Stanley No. 55 multi plane 75 Miscellaneous - Black and Decker industrial dust extractor 76 Saws - assorted hand saws and pruning saws etc. 77 Miscellaneous - dumpy level, staff and tripod 78 Cowley staff and tripod 79 Miscellaneous - assorted string lines and plumb bob 80 Chisels - 10x assorted chisels in wood case 81 Drills - 4x bit braces and quantity of bits 82 Chisels - 6x assorted chisels and bearing scraper 83 Spanners - assorted ring and open ended spanners 84 Miscellaneous - quantity of blow torches and propane kit 85 Miscellaneous - assorted pliers, tinsnips, cutters etc. 86 Miscellaneous - assortment of tapes, turnscrew, marking gauge, bevel etc. 87 Miscellaneous - assortment of oil cans and oil syringes 88 Miscellaneous - assortment of Stanley knives, scissors, glass cutters etc. 89 Miscellaneous - 2x battery chargers 90 Spanners - assortment of keys and ignition spanners 91 Planes - assorted wooden smoothers, spokeshave and Stanley No Miscellaneous - 3x Yankee type screwdrivers and tin of bits 93 Spanners - assorted shifters and Stilsons 94 Spanners - 3x Stilson style pipe wrenches 95 Miscellaneous - assorted abrasive stones - oil stones 96 Miscellaneous - opportunity lot 97 Miscellaneous - assorted boxed sets of drill bits 98 Miscellaneous - tub of saw sets, filing guides etc. 99 Miscellaneous - chisels, clamps, files etc. 100 Miscellaneous - levels, nail puller, square etc. 101 Clamps - 4x 200mm Dawn G clamps 102 Miscellaneous - Marples holdfast in box 103 Miscellaneous - Eclipse magnetic base - Mercer dial indicator 104 Miscellaneous - Mayer micrometer stand in box 105 Miscellaneous - Moore and Wright boxed surface gauge 106 Miscellaneous - 6x telescopic gauges and 1x scriber 107 Miscellaneous - box of rivet sets and punches (15 pieces) 108 Miscellaneous - soldering oven, porcelain pot, soldering irons and solder
5 109 Miscellaneous - box of sanding drums 110 Miscellaneous - bucket of trowels 111 Vice - small carpenter's vice 112 Plane - Rapier plough plane 113 Miscellaneous - 3x pipe flaring tools - incomplete 114 Plane - Stanley No. 6 fore plane 115 Plane - Stanley No. 55 with 4x boxes of blades 116 Plane - Groz No. 5 plane in box 117 Miscellaneous - Black and Decker dovetail jig 118 Spanners - assorted spanners 119 Spanners - assorted sockets 120 Drills - 2x brace and 1x two speed hand drill 121 Miscellaneous - 5x tinsmith stakes, stakeholder and 1x tongs 122 Miscellaneous - assorted light bulbs 123 Miscellaneous - toolbox and assorted tools 124 Miscellaneous - Dremel with stand 125 Miscellaneous volt remote stop/start switch 126 Miscellaneous - 3x steel tins, tubs of rubber bands and transporter wheels 127 Saw - two man cross cut saw 128 Miscellaneous - wooden barrel on metal stand 129 Drill - brace and bits 130 Miscellaneous - assorted files and rasps 131 Miscellaneous - assorted chisels, pliers etc. 132 Miscellaneous - assorted mixed workshop tools 133 Planes - 3x wooden planes 134 Miscellaneous - 2x hammers, 2x wrenches, 2x soldering irons 135 Saws - mixed lot of saws 136 Planes - 6x wooden smoothing planes 137 Saws - mixed lot of saws 138 Planes - 1x wooden razee jointer and 1x wooden panel plane 139 Planes - 5x wooden German jack planes 140 Miscellaneous - wooden carpenter's trunk and till
WASSCE / WAEC FURNITURE MAKING SYLLABUS
WASSCE / WAEC FURNITURE MAKING SYLLABUS WWW.LARNEDU.COM Visit www.larnedu.com for WASSCE / WAEC syllabus on different subjects and more great stuff to help you ace the WASSCE in flying colours. SCHEME
More informationA Page No. 1. Electrode Drying oven thermostatically controlled temperature C
A Page No. 1 Package No 1. : Machinery of Welding, Sr. Name of Item Rate to be quoted by tenderer (in rupees) along with specification and make Electrode Drying oven thermostatically controlled temperature
More informationASSIGNMENT 3. Textbook Assignment: 3-5. Which of the following types of hammers is used for driving and pulling nails?
ASSIGNMENT 3 Textbook Assignment: "Clamps," "Jacks," Hammers, Mallets, and Mauls," "Screwdrivers," "Manual Drills," "Screw and Tap Extractors," "Wrenches," "Chisels," and "Punches," chapters 19 through
More informationFACILITY ACCREDITATION CHECKLIST R: 01/16/97 APPRENTICESHIP. Rating Code: Y = Yes * N = No * R = Required * AUDIT AREA: DATE: / / LAYOUT TOOLS Y N R
FACILITY ACCREDITATION CHECKLIST R: 01/16/97 APPRENTICESHIP Designated Trade: Level 1 2 3 (circle one) Institution: Evaluator(s) / / Rating Code: Y = Yes * N = No * R = Required * * Please use a CHECKMARK
More informationPATINA Auction Lot List
PATINA Auction Lot List - 2018 LOT # 1 SAHRPENING STONES 2 DREMEL AND PRESS 3 ROTARY TOOL AND ACCESSORIES 4 DRILLING AND BORING TOOLS 5 ANVIL 6 MEASURING TOOLS 7 MISC HAND TOOLS 8 MISC MINI PWR TOOLS (4)
More informationTool ID. Team Score Format: A team shall be comprised of 4 members. The top 3 team members scores will count toward the final team score.
Tool ID Purpose: To develop the student s ability to correctly identify the names and uses of a variety of tools commonly used in the agricultural industry. Team Score Format: A team shall be comprised
More informationNOTICE INVITING QUOTATIONS. Description : Equipment for Engineering Workshop in Mechanical Engg. Department. NIQ No : RGUKT-B/Proc/ME/EWS/Q03/2019
RAJIV GANDHI UNIVERSITY OF KNOWLEDGE TECHNOLOGIES Basar, Nirmal District Constituted under the Act 18 of 2008 Ref: RGUKT-B/Proc/ME/EWS/Q03/2019, dated.07.02.2019 NOTICE INVITING QUOTATIONS Description
More informationASSIGNMENT 4. Textbook Assignment: The point, edge, face, heel, and tang are the five parts of which of the following tools?
ASSIGNMENT 4 Textbook Assignment: "Files," "Grinders and Sharpening Stones," "Scrapers," "Awls," "Bolt and Cable Cutters," "Glass Cutters," "Knives,' 'Pipe Cutting and Threading Tools," "Tube Cutting and
More informationACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Machinist AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students
More informationACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Carpenter AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students
More informationCARPENTRY. Carpentry tools: The following are the tools that are made use of in all the wood working operations.
CARPENTRY INTRODUCTION: Carpentry may be defined as the process of making wooden components. It starts from a marketable form of wood and ends with a finished product. It Deals with the building work,
More informationSkills. Pupil Homework Name :- Lesmahagow High School Technical Department. Homework Name the tool shown opposite.
Homework 27 1. Name the tool shown opposite. (Page 38) (1) Lesmahagow High School Technical Department 2. Name the tool shown opposite. (Page 39) (1) Practical Woodworking 3. Name the tool shown opposite.
More informationESL - DESIGN AND TECHNOLOGY / TECHNICS HANDTOOL IDENTIFICATION AND TERMINOLOGY
ESL - DESIGN AND TECHNOLOGY / TECHNICS HANDTOOL IDENTIFICATION AND TERMINOLOGY One of the biggest difficulties in teaching ESL students practical skills is the lack of exposure to related technology and
More informationSingla Steels. https://www.indiamart.com/singlasteels/
+91-8071677322 Singla Steels https://www.indiamart.com/singlasteels/ We are the leading Manufacturer, Exporter and Supplier of all types of Hand Tools. All our products are known for their precise design,
More informationFireFighterPrep Comprehensive Guide to Canadian Fire Service Exams
FireFighterPrep Comprehensive Guide to Canadian Fire Service Exams Copyright 2009 Dekalam Hire Learning Incorporated TOOLS Hammers Hammers are instruments used for pounding. For the most part they serve
More informationHand Tools. 1. Marking Out Tools
Hand Tools 1. Marking Out Tools Steel Rule Used for measuring Measure twice, cut once, golden rule of woodwork Rule should begin from the edge of the metal Millimetres are used, nothing else will do 10mm
More informationHand Tool Identification Worksheet. Name: Screw driver. Purpose: To turn the screws. Name: chisels. Purpose: To remove/chip away materials
Hand Tool Identification Worksheet Name: Screw driver Purpose: To turn the screws Safety Facts: Don t use for prying or as a chisel Name: chisels Purpose: To remove/chip away materials Safety Facts: Always
More informationShuttering Carpenter
Lab Specifications Shuttering Carpenter An initiative of Ministry of Skill Development & Entrepreneurship, Govt. of India and National Skill Development Corporation 02 If we have to promote the development
More informationALL TOOLS SHOULD BE AMERICAN MADE
1 st PERIOD MILLWRIGHT APPRENTICE TOOL LIST Effective September 1 st, 2016 Required Tools: Tongue and Groove Pliers (Channel Lock) 2 set Cold Chisel 2 nd PERIOD MILLWRIGHT APPRENTICE TOOL LIST Required
More informationAffiliate: Richmond Tool Inventory As Of: 4/16/2018
Affiliate: Richmond Tool Inventory As Of: 4/16/2018 NOTE: The Total Inventory quantity does not reflect current tool type availability; please call the Richmond ToolBank at 804-301-0750 for more information.
More informationPrice list- catalogue goods
Hammers Hammer- machinist Machinist hammer 28/100 g 8590343002004 5,56 Machinist hammer 28/200 g 8590343002028 5,96 Machinist hammer 28/300 g 8590343002042 6,36 Machinist hammer 28/400 g 8590343002059
More informationProf. Steven S. Saliterman Introductory Medical Device Prototyping
Introductory Medical Device Prototyping Department of Biomedical Engineering, University of Minnesota http://saliterman.umn.edu/ You must complete safety instruction before using tools and equipment in
More informationPRIVATE SECONDARY SCHOOLS AUTHORITY
PRIVATE SECONDARY SCHOOLS AUTHORITY ASSESSMENT AND GRADING OF FACILITIES PROVIDED IN A SPECIALIST ROOM RECKONED AS: TECHNOLOGY WORKSHOP - YEAR 05 SUBJECT APPELLATION AND LEVEL DESIGN AND TECHNOLOGY UP
More informationIWB-40 - Industrial Work Bench
IWB-40 - Industrial Work Bench 1800 x 750 x 900mm 1000kg Load Capacity On Sale Ex GST Inc GST $398.00 $343.48 $457.70 $395.00 ORDER CODE: A420 MODEL: Type: IWB-40 Steel with Laminated Top Table Top Load
More informationITC (HS), 2012 SCHEDULE 1 IMPORT POLICY CHAPTER 82 TOOLS, IMPLEMENTS, CUTLERY, SPOONS AND FORKS, OF BASE METAL; PARTS THEREOF OF BASE METAL
CHAPTER 82 NOTES: TOOLS, IMPLEMENTS, CUTLERY, SPOONS AND FORKS, OF BASE METAL; PARTS THEREOF OF BASE METAL 1. Apart from blow lamps, portable forges, grinding wheels with frameworks, manicure of pedicure
More informationLABORATORY MANUAL W-SHOP TECHNOLOGY LAB ME-105-F
LABORATORY MANUAL W-SHOP TECHNOLOGY LAB ME-105-F ME-105F : WORKSHOP TECHNOLOGY MAHARISHI DAYANAND UNIVERSITY ROHTAK SYLLABUS B.TECH. FIRST YEAR LIST OF EXPERIMENTS S.No. NAME OF EXPERIMENTS PAGE No. FROM
More informationWe are well-known Manufacturer and Supplier of broad gamut of Hand Tools such as Wrenches, Pipe Die Sets, Drilling Machines, Hand Tools, etc.
We are well-known Manufacturer and Supplier of broad gamut of Hand Tools such as Wrenches, Pipe Die Sets, Drilling Machines, Hand Tools, etc. These are highly appreciated for optimum quality, corrosion
More informationEYEGLASSES SCREWDRIVERS PIN VICES AND DRAW PLATES
EYEGLASSES SCREWDRIVERS PIN VICES AND DRAW PLATES EYEGLASSES SCREWDRIVERS PIN VICES AND DRAW PLATES 111-1 10.0x 0.012 111-1.5 6.5x 111-2 5.0x 111-2.5 4.0x 111-3 3.5x 111-3.5 3.0x 111-4 2.5x Plastic eyeglass
More informationSET CM.160A WITH 8-DRAWER ROLLER CABINET JET.8GM3 AND CHEST JET.C4GM3
SET CM.160A WITH 8-DRAWER ROLLER CABINET JET.8GM3 AND CHEST JET.C4GM3 : Weight: 239 kg. Qty JET.8GM3 1 JET+ 8-drawer roller cabinets - 3 modules per drawer JET.C4GM3 1 JET+ 4-drawer chest - 3 modules per
More informationGalloway Woodturners Auction 2016 Sunday 23 October 2016, Viewing 11am, Auction starts 1pm
Galloway Woodturners Auction 2016 Sunday 23 October 2016, Viewing 11am, Auction starts 1pm 001 DeLonghi Radia 1500W heater 002 Bench grinder, Clarke 6", CBG6RP 003 Reciprocating saw, Workzone 710W, 004
More informationTCW Industrial Tooling Cabinet
TCW-1200 - Industrial Tooling Cabinet 881 x 653 x 1200mm 100kg per Drawer Ex GST Inc GST $1,070.00 $1,230.50 ORDER CODE: MODEL: T772 TCW-1200 Number of Drawers (No.): 7 Drawer Load Capacity (kg): 100 Maximum
More information1 1 John Deere DI55 48" Cut, 54 hrs 2 1 John Deere L MASTERHAND ROLLCAB TOOL CHEST 4 1 NORTHSTAR PRESSURE WASHER 5 1 AIRTANK 6 1 LP TANK 7 1
1 1 John Deere DI55 48" Cut, 54 hrs 2 1 John Deere L100 3 1 MASTERHAND ROLLCAB TOOL CHEST 4 1 NORTHSTAR PRESSURE WASHER 5 1 AIRTANK 6 1 LP TANK 7 1 STANDS 8 1 HYDRAULIC JACK 9 1 TROLLEY HYDRAULIC JACK
More informationperf india made economical items EYEGLASSES PE 2 SCREWDRIVERS PE 4 PIN VICES PE 6 DRAW PLATES PE 7 HAMMERS AND SAW FRAMES PE 8 HAND TOOLS PE 9
perf india made economical items EYEGLASSES PE 2 SCREWDRIVERS PE 4 PIN VICES PE 6 DRAW PLATES PE 7 HAMMERS AND SAW FRAMES PE 8 HAND TOOLS PE 9 CASE TOOLS PE 9 BRACELET TOOLS PE 13 VICES PE 14 CASE HOLDERS
More informationIWB-12 - Industrial Work Bench
IWB-12 - Industrial Work Bench 1200 x 750 x 900mm 1000kg Load Capacity Ex GST Inc GST $270.00 $297.00 ORDER CODE: A415 MODEL: Type: IWB-12 Steel with Laminated Top Table Top Load Capacity (kg): Number
More informationTools for Plumbing. Introduction
2 Tools for Plumbing Introduction So far, we have studied the importance of plumbing system, its stages and the role and responsibilities of a plumber. We will now look at the various tools that help a
More informationUnit Drawback when cenvat facilities has not been availed Drawback Rate
Chapter No 82: Tools, Implements, Cutlery, Spoons and Forks, of Base Metal; Parts thereof of Base Metal Chapter Description of Goods Unit Drawback when cenvat facilities has not been availed Drawback Rate
More informationTCW-900NP - Industrial Mobile Tooling Cabinet with Backing Panel
TCW-900NP - Industrial Mobile Tooling Cabinet with Backing Panel 565 x 580 x 1400mm 100kg per Drawer Package Deal Ex GST Inc GST $724.55 $797.00 Package Contents - SAVE $61.00 (Inc) 1x 1x 1x 1x T764 -
More informationIWB-12P2 - Industrial Work Bench Package Deal 1200 x 750 x 1725mm 1000kg Load Capacity
IWB-12P2 - Industrial Work Bench Package Deal 1200 x 750 x 1725mm 1000kg Load Capacity On Sale Ex GST Inc GST $599.13 $565.22 $689.00 $650.00 Package Contents - SAVE $148.10 (Inc) 1x 1x 4x 4x 1x 1x 1x
More informationArchitecture and Construction Plumbing and Pipefitting Revised 8/30/2012 Item Number Price Per Piece Total
Architecture and Construction Plumbing and Pipefitting Revised 8/30/2012 Item Number Price Per Piece Total 2ft. Level 3 $7.00 $21.00 4ft. Level 2 $14.00 $28.00 Pipe Rack 2 $300.00 $600.00 Adjustable Pipe
More informationTrade of Sheet Metalwork. Module 1: Sheetmetal Fundamentals Unit 1: Induction Phase 2
Trade of Sheet Metalwork Module 1: Sheetmetal Fundamentals Unit 1: Induction Phase 2 Table of Contents List of Figures... 5 List of Tables... 7 Document Release History... 8 Module 1 Sheetmetal Fundamentals...
More informationBSC Industrial Storage Cabinet
BSC-900 - Industrial Storage Cabinet 900 x 450 x 900mm 150kg Shelf Load Capacity Ex GST Inc GST $320.00 $368.00 ORDER CODE: MODEL: Shelf Load Capacity (kg): Drawer Load Capacity (kg): Dimensions (L x W
More informationWTC Industrial Mobile Tooling Cabinet Workstation
WTC-1450 - Industrial Mobile Tooling Cabinet Workstation 1170 x 580 x 1450mm 100kg per Drawer Ex GST Inc GST $1,050.00 $1,155.00 ORDER CODE: MODEL: T773 WTC-1450 Number of Drawers (No.): 5 Drawer Load
More informationSFWW Quality Tool Sale
SFWW Quality Tool Sale SFWW has been commissioned by Dave Coole, a former celebrated senior engineer and toolmaker at the prestigious Royal Aircraft Establishment in Farnborough. David joined the RAE as
More informationElectrical Construction Name:
Tools of the Trade The following are common tools that are used in the electrical industry. This hand-out is to help familiarize you with the tools, the terminology, and their use. Retractable Steel tape
More informationMeasuring7 & Marking
Marking7 Measuring & Try & Mitre Squares Part No 150mm Try & Mitre (200mm Overall Length) H105672 $22.60 $20.30 6 200mm Try & Mitre (250mm Overall Length) H105673 $28.20 $25.40 6 250mm Try & Mitre (300mm
More informationQuality Tool Sale All Welcome 19:15 Thursday 27 September
Quality Tool Sale All Welcome September The Southern Fellowship of Woodworkers is privileged to present this sale of exceptional quality tools, accessories and books to SFWW members, associates and guests.
More informationRoyal Corporation, Chennai
+91-8071676709 Royal Corporation, Chennai https://www.indiamart.com/royalcorporation/ We are the trader of measuring instruments, cutting tools, lifting tools and magnetic tools. All our products find
More informationPG Tools catalogue
CATALOGUE 208-03 PG Tools catalogue 208-03 MINI ROTARY TOOL KIT ASSORTED ACCESSORIES FOR MINI POWER TOOLS 35 W No-load speed 8000-33000 RPM 640 g 2 m PG95A kit 95 accessories 07077 PG38W - ergonomically
More informationAzmeera & Sons.
+91-8071681915 Azmeera & Sons https://www.indiamart.com/azmeerasons/ We have garnered a distinct position in the market as wholesaler, retailer and trader of a range of Industrial Tools & Accessories.
More informationProfessional Tools for Craftsmen
TOOLS Professional Tools for Craftsmen Roofers Sheet Metal Workers TOOLS TOOLS Snips Genuine Aviation Snips 01280240 Stainless steel, compound leverage 09.45 x 3.15 0.83 lb. for stainless steel sheets,
More informationTOOLS, IMPLEMENTS, CUTLERY, SPOONS AND FORKS, OF BASE METAL; PARTS THEREOF OF BASE METAL
CHAPTER 82 TOOLS, IMPLEMENTS, CUTLERY, SPOONS AND FORKS, OF BASE METAL; PARTS THEREOF OF BASE METAL Notes 1. Apart from blowlamps, portable forges, grinding wheels with frameworks, manicure and pedicure
More informationMatch the tool with its name.
Handyperson Special Index Activity Page Match the tool with its name. Hammer Drill Nail Screw Nut Level Ladder Pliers Wrench Screwdriver Measuring Tape Tool Time Word Search BOARD BOLT BRICK CEMENT CONSTRUCTION
More informationSAFETY, SAFETY, SAFETY
Key Points Safety considerations. Cost considerations. Basic Tools used in everyday model railroading. Advanced Tools used in model railroading. Optional Homemade Tools SAFETY, SAFETY, SAFETY This hobby
More informationHynds Tool Range. Built Trade Tough
Hynds Tool Range Built Trade Tough P3 HYNDS TOOL RANGE BROCHURE 2017 Contents Insulated Non-Conductive Range P4-5 Shovels, Spades & Rakes P6-8 Wheelbarrow P8 Pliers & Shears P9 Wrenches P10 Allen Keys
More information*0600/401* 0600/401. CRAFT AND DESIGN STANDARD GRADE Foundation Level. Fill in these boxes and read what is printed below. Full name of centre
FOR OFFICIAL USE F 6/4 NATIONAL QUALIFICATIONS 29 MONDAY, 8 MAY 9. AM. AM Total CRAFT AND DESIGN STANDARD GRADE Foundation Level Fill in these boxes and read what is printed below. Full name of centre
More informationTC Industrial Tooling Cabinet
TC-900 - Industrial Tooling Cabinet 900 x 450 x 900mm 75kg per Drawer Ex GST Inc GST $820.00 $700.00 $902.00 $770.00 Special Ends 25/11/2018 ORDER CODE: MODEL: Number of Drawers (No.): Drawer Load Capacity
More informationEVOLVE TOOL CHEST 7 DRAWER
ALL PRICES INCLUDE GST OFFER VALID UNTIL 31/10/2015 Offer available in Australia only. APPRENTICES ONLY! 999 00 214 PCE EVOLVE TOOL KIT Part No. P1400 EVOLVE TOOL CHEST 7 DRAWER 666 x 410 x 475mm 93 Piece
More informationGUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT. Course Curriculum. ENGINEERING WORKSHOP PRACTICES (Code: ) Aeronautical Engineering
GUJARAT TECHNOLOGICAL UNIVERSITY, AHMEDABAD, GUJARAT Course Curriculum ENGINEERING WORKSHOP PRACTICES (Code: 3301901) Diploma Programme in which this course is offered Aeronautical Engineering Semester
More informationSTC-COMBI - Industrial Storage & Tooling Cabinet Package Deal
STC-COMBI - Industrial Storage & Tooling Cabinet Package Deal 900 x 450 x 1800mm 150kg Shelf Load & 75kg per Drawer Load Capacity Ex GST Inc GST $1,060.00 $1,166.00 ORDER CODE: MODEL: Shelf Load Capacity
More informationClass 8. Explanatory Note. Hand tools and implements (hand-operated); cutlery; side arms; razors.
Class 8 Hand tools and implements (hand-operated); cutlery; side arms; razors. Explanatory Note Class 8 includes mainly hand-operated implements used as tools in e respective professions. This Class includes,
More informationINTRODUCTION. A space, room or building in which goods are manufactured or repaired is know as workshop.
INTRODUCTION A space, room or building in which goods are manufactured or repaired is know as workshop. A workshop may also be defined as a room or building which provides both the area and tools (or machinery
More informationOffice of the Chairman IMC of Industrial Training Institute, Udhampur. RE-TENDER NOTICE.
Office of the Chairman IMC of Industrial Training Institute, Udhampur. RE-TENDER NOTICE. This Industrial Training Institute intends to purchase Tools, Machinery and Equipments for use in the trades fall
More informationBD Toolbox PN: 2018-FCS-MRT-BD
BD Toolbox PN: 2018-FCS-MRT-BD PELI tool case trolley made out of synthetic resin, black, watertight, impact-resistant, with pressure equalizing valve, Inlays in two colors, red/anthracite, Skydrol resistant
More informationIndustrial Tools and Equipments
Industrial Tools and Equipments www.arabigsis.com Serving the industry for over 30 years Industrial Tools Industrial Tools is the flagship division of the company representing various leaders in Industrial
More informationSSB-18WS - Stainless Steel Work Bench
SSB-18WS - Stainless Steel Work Bench 1800 x 700 x 900mm Ex GST Inc GST $430.00 $473.00 ORDER CODE: MODEL: Type: Table Top Load Capacity (kg): Number of Drawers (No.): Table Dimensions (L x W x H) (mm):
More informationHYGIENIC AND BEAUTY IMPLEMENTS FOR HUMANS AND ANIMALS
Class 8 Hand tools and implements (hand-operated); cutlery; side arms; razors. Explanatory Note Class 8 includes mainly hand-operated implements used as tools in e respective professions. This Class includes,
More informationKIT DAD OUT FOR THE SEASON
ON SALE 1st Aug - 31st Oct 14 KIT DAD OUT FOR THE SEASON 213PC TOOL KIT 6 Drawer Toolchest with BBS Multiple inserts for organised tools 30PC Hexagon Key AF 24PC Comb Spanner 54PC Bit PC ¼ & 3/8 DR Socket
More informationCARPENTRY & MEASURING TOOLS CATALOGUE
CARPENTRY & MEASURING TOOLS CATALOGUE 2 CARPENTRY TOOLS CARPENTRY TOOLS 3 SMC - 431 T - BAR CRAMPS Bar Manufactured From Special 'T' Bar Section Steel Head & Slide Made Of Cast Iron Suitable For Heavy
More informationAGRICULTURAL TOOLS AND MATERIALS CAREER DEVELOPMENT EVENT Rules for the State FFA Event
AGRICULTURAL TOOLS AND MATERIALS CAREER DEVELOPMENT EVENT Rules for the State FFA Event Chapter Guide to State FFA Activities Sponsor This event is sponsored by Mr. and Mrs. C.V. Tart, and Interstate Bolt
More informationName: Class: Teacher:..
Name: Class: Teacher:.. 1 Metals All metals in use today are either PURE METALS or ALLOYS. Copper, iron, tin, lead, gold and silver are all examples of PURE METALS which have been mined from the Earth
More informationMaking a Finished Product from Wood (National 4) level 4 (6 SCQF credit points)
Making a Finished Product from Wood (National 4) SCQF: level 4 (6 SCQF credit points) Unit code: H25Y 74 Unit outline This is the Added Value Unit in the National 4 Practical Woodworking Course. The general
More informationSTRIKING TOOLS (Users and bystanders - always wear safety goggles when using striking tools) Basic Safety Rules that Apply to the use of Hammers
STRIKING TOOLS (Users and bystanders - always wear safety goggles when using striking tools) Hammers and other striking tools are perhaps the most widely used, and probably the most often abused of all
More informationTool Kits. Discover more at rspro.com
Tool Kits 42 Piece Technicians Tool Kit RS ITEM # 136-3400 02 03 04 05 12 15 14 06 07 08 09 10 11 13 16 17 18 19 20 21 1 Double Open End Wrench - 5x5.5 / 6x7 / 8x10 mm 2 6 Piece Needle File Set 3 Gas Soldering
More informationModule One: Non Powered Hand Tools
Module One: Non Powered Hand Tools What is included in this module Why are we learning this? Safety rules Right tool for the right job Identity of Tools Hands on time Quiz Why are we here? Basic knowledge
More informationTerms of reference. Set up training lab in the different location as per distribution centre list.
Terms of reference Request for Quotation for the supply of Machines & Tools (equipment) to deliver NTVQ Training Program on Carpentry Lacquer Polish and Upholstery The Bangladesh Skills for Employment
More informationGreenfaulds High School
Greenfaulds High School Technical Department Standard Grade Craft & Design Knowledge & Understanding In Metal Page 1 Metals All metals in use today are either PURE METALS or ALLOYS. Copper, iron, tin,
More informationTOOL KITS. THEY MATTER
TOOL KITS. THEY MATTER Discover more at se.rs-online.com/rspro 42 Piece Technicians Tool Kit RS ITEM # 1363400 02 03 04 05 12 15 14 06 07 08 09 10 11 13 16 17 18 19 20 21 1 Double Open End Wrench - 5x5.5
More informationMACHINIST (3 Month Course) Revised May, 2009
GOVERNMENT OF THE PUNJAB TECHNICAL EDUCATION & VOCATIONAL TRAINING AUTHORITY CURRICULUM FOR CURRICULUM FOR MACHINIST (3 Month Course) Revised May, 2009 CURRICULUM SECTION ACADEMICS DEPARTMENT 96-H, GULBERG-II,
More informationItem ID Item Type Name
Item ID Item Type Name Amount / Fee Manufacturer 1 Power Drills Power Drill (corded) 3 Makita 2 Power Drill 3/8in Power Drill (corded) 3 Black & Decker 3 Power Drills Power Drill (corded) 3 DeWalt 4 Cordless
More informationQuestion 1. Flat file. Half -round. Round file. Three square ( triangle ) Needle files. Page 1 of 46
Question 1 Name Picture Cross section Uses: Cut pattern:: Flat file Half -round Round file Three square ( triangle ) Needle files Page 1 of 46 Question 2 The graph shown below is the data collected for
More informationDESIGN AND TECHNOLOGY 6043/01 Paper 1 Technology For Examination from 2016 SPECIMEN MARK SCHEME 2 hours 30 minutes MAXIMUM MARK: 100
Cambridge International Examinations General Certifi cate of Education Ordinary Level DESIGN AND TECHNOLOGY 6043/01 Paper 1 Technology For Examination from 2016 SPECIMEN MARK SCHEME 2 hours 30 minutes
More informationAgricultural Mechanics and Technology Power Tool Safety Rules
Agricultural Mechanics and Technology Power Tool Safety Rules Name: BAND SAW Use: Cutting curves, circles and irregular shapes. 1. Use clean SHARP blades. 2. The teeth should always point DOWN. 3. Adjust
More informationDesign and Technology Resistant materials Key words and definitions
Design and Technology Resistant materials Key words and definitions Word Acrylic Definition a type of thermoplastic, which is hard and can be transparent. Used to make shop signs. Perspex is a trade/brand
More informationSALE LISTING of HAND TOOLS etc
Aberdeen & Northern Marts Thainstone Centre, Inverurie. AB51 5XZ Saturday 22 nd September 2018 Sale of Commercial Vehicles, 4 x 4s, Excavators, Digger Loaders, Trailers, Tractors, Agricultural Machinery
More informationProduct Brochure For T739. Description. Features. Sydney: (02) Brisbane: (07) Melbourne: (03) Perth: (08)
ITB-S3 - Industrial Tool Box Set (30", 36", 48") Package Deal 1 x Gas Strut on 36", 2 x Gas Struts 48" (762 x 356 x 254mm) + (915 x 432 x 540mm) + (1220 x 615 x 720mm) Ex GST Inc GST $590.00 $649.00 ORDER
More informationREPORT. Misconception: most of the candidates gave any plastic they know.
0189 2017 REPORT GENERAL OVERVIEW The question paper consisted of 16 questions of which 10 were short general questions which were compulsory and formed part A. Part B was in two sections, section1 consisted
More informationTOOL DEAL & PROMOTIONAL DISPLAYS TOOL DEAL ET AFFICHE PROMOTIONNELLE
TOOL DEAL & PROMOTIONAL DISPLAYS TOOL DEAL ET AFFICHE PROMOTIONNELLE 1021 NO ITEM # DESCRIPTION QTY Item No: 199512 Hottest package deal from Toolway 1 199512 200 PC Picture Hanging Set 12 2 199512 2 PC
More informationFlat file. Round file. Hand file. Half -round. Mill file. Square file
Name Picture Cross section Uses: Cut pattern:: Hand file used for roughing and finishing. It has double cut teeth on two faces, single cut teeth on one edge, and one safe edge Flat file used for roughing
More information6043 DESIGN AND TECHNOLOGY
www.onlineexamhelp.com www.onlineexamhelp.com CAMBRIDGE INTERNATIONAL EXAMINATIONS GCE Ordinary Level MARK SCHEME for the October/November 2013 series 6043 DESIGN AND TECHNOLOGY 6043/01 Paper 1, maximum
More informationIndex to General Catalogue i
Index to General Catalogue i Abbeydale Back Saws... D 12 Hand Saws... D 9 American Hay Rakes... A 7 Ring Poles... A 7 Axes, Granite......... Q 3 Back Saws....... D 11,12 ;, Abbeydale... D 12 Brass......
More informationSCOPE DOCUMENT. Competition Year 2012 Competition location Edmonton, AB Trade Number 15. Post-Secondary
SCOPE DOCUMENT Competition Year 2012 Competition location Edmonton, AB Trade Number 15 Trade Name Plumbing Level Post-Secondary 1. INTRODUCTION 1.1 Purpose of the Challenge. To assess the contestant s
More informationActivity Sheet Solutions
Activity Sheet Solutions Health & Safety 2 Q. 1 Only one person at a time allowed on the machine Wear safety goggles when drilling Grip the metal tightly in the vice Q. 2 To prevent accidents Q. 3 Keep
More information0445 DESIGN AND TECHNOLOGY
CAMBRIDGE INTERNATIONAL EXAMINATIONS International General Certificate of Secondary Education MARK SCHEME for the May/June 2014 series 0445 DESIGN AND TECHNOLOGY 0445/33 Paper 3 (Resistant Materials),
More informationAIR FORCE TO ARMY TM NAVY M6290-AJ-MAN-1010 MARINE CORP TM /1
AIR FORCE TO 32-1-101 ARMY TM 9-243 NAVY M6290-AJ-MAN-1010 MARINE CORP TM 10209-10/1 TECHNICAL MANUAL USE AND CARE OF HAND TOOLS AND MEASURING TOOLS DISTRIBUTION STATEMENT A - Approved for public release;
More informationMechanical Workshop Practice
Second Edition Mechanical Workshop Practice K.C. John MECHANICAL WORKSHOP PRACTICE SECOND EDITION K.C. JOHN Professor and Head Department of Production Engineering Vidya Academy of Science and Technology
More informationAIN SHAMS UNIVERSITY FACULTY OF ENGINEERING DESIGN AND PRODUCTION ENGINEERING DEPARTMENT
AIN SHAMS UNIVERSITY FACULTY OF ENGINEERING DESIGN AND PRODUCTION ENGINEERING DEPARTMENT Credit hours System PRODUCTION TECHNOLOGY MDP 024 Freshman Students Group (3) Report On: (1) Carpentry النجارة Student
More informationCabinetmaking & Millwork CIP Task Grid
1 Secondary Task List 100 DEMONSTRATE PERSONAL SAFETY. 101 Demonstrate knowledge of general safety rules for working in the cabinetmaking lab. 102 Identify cabinetmaking lab tools and equipment. 103 State
More informationWritten by Bill Tarplee Wednesday, 11 April :03 - Last Updated Thursday, 07 January :47
Bull-Nosed Planes Quite a number of planes were designed so that the blade was situated toward the front of the sole, in other words you could plane into a corner. If the blade was covered by part of the
More informationHand Tools and Power Tools
Lesson Outcomes The student will be able to: Identify a variety of hand tools and power tools and describe their purpose, application and how they are operated in a safe and proper manner. A wide variety
More information6043 DESIGN AND TECHNOLOGY 6043/01 Paper 1 (Technology), maximum raw mark 95
UNIVERSITY OF CAMBRIDGE INTERNATIONAL EXAMINATIONS GCE Ordinary Level MARK SCHEME for the October/November 2009 question paper for the guidance of teachers 6043 DESIGN AND TECHNOLOGY 6043/01 Paper 1 (Technology),
More information