3/16 x 5/8 Bolt. 2 Handle 7 Front Plinth 1 G. Connector. Shelf Support. 4 Hinge 10 Left Door 1 J. Bracket. L Stud

Transcription

1 ASSEMBLY INSTRUCTIONS 2 DOOR DISPLAY UNIT / BOOKCASE IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR 2 DORO DISPLAY UNIT / BOOKCASE. PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. ASSEMBLY INSTRUCTIONS: Please check contents and read instructions carefully before commencing assembly. To avoid damages assemble the item on a soft, clean surface. Assemble in the room of use. HEALTH & SAFETY: DO NOT use this item if any parts are missing, damaged or worn. DO NOT use this item unless all fixings are secured. Always use on a level, even surface. It is recommended that two people handle and assemble the item. Keep small parts out of the reach of children. CARE & MAINTENANCE: This product is manufactured in pine which is a wood with natural characteristics including knots, grains, clusters or indentations. On unpacking the item you may notice an odour due to the production process, however, this will disappear after a period of time. DO NOT place the item next to a radiator or direct sunlight as this item is susceptible to temperature change. It is recommended to maintain an even room temperature with no sudden fluctuations. For general cleaning use a duster or damp cloth (almost dry) not wet do not use soap and water, detergents, aerosol sprays or any polish as the use of these materials would invalidate any claims. You may wish to re-treat the surface to maintain the original finish. This can be done using block wax (unperfumed). Please follow the manufacturer s instructions carefully. DO NOT place the item onto wet or damp flooring as staining may occur to the floor. Periodically check all screws & fixings to ensure they are secure. DO NOT push the item as this will damage the base. Keep any sharp objects away from the item. Page 1 of 9

2 Parts List Hardware List Part Description Qty Part Description Qty 1 Top Panel 1 A 4 x 30 mm Screw 9 2 Left Panel 1 B 3.5 x 14 mm Screw 36 3 Right Panel 1 C 3/16 x 5/8 Bolt 2 4 Front Frame 1 D 10 x 10 mm Tack 26 5 Base Panel 2 E 8 x 25 mm Wooden Dowel 26 6 Side Plinth 2 F 2 Handle 7 Front Plinth 1 G Connector 2 8 Shelf 3 H Shelf Support 12 9 Back Panel 1 I 4 Hinge 10 Left Door 1 J Bracket 2 11 Right Door 1 K 3.5 x 35 mm Screw 28 ** You will need a small mallet and a screwdriver. L Stud 6 Page 2 of 9

3 Step 1: Insert hardware parts E and H using a small mallet (not provided). Step 2: Connect the left panel (2) and right panel (3) to the base panels (5) using hardware part K and a screwdriver (not provided). Page 3 of 9

4 Step 3: Attach top panel (1) using hardware part K and a screwdriver (not provided). Step 4: Attach the front frame (4) using hardware part K and a screwdriver (not provided). Page 4 of 9

5 Step 5: Attach the side plinths (6) using hardware part A, then fix hardware part J to the base panels (5) using hardware part B. You will need to use a screwdriver (not provided). Step 6: Attach the front plinth (7) using hardware part A and a screwdriver (not provided). Page 5 of 9

6 Step 7: Attach hardware part I to the left door (10) and right door (11) using hardware part B. Fix hardware part F to each door using hardware part C. You will need to use a screwdriver (not provided). Step 8: Fix hardware part G to each door using hardware part B and a screwdriver (not provided). Page 6 of 9

7 Step 9: Attach the left door (10) and right door (11) using hardware part B and a screwdriver (not provided). Step 10: Secure hardware parts G using hardware part B and a screwdriver (not provided). Page 7 of 9

8 Step 11: Insert the shelves (8). Step 12: Attach the back panel (9) using hardware part D and a small mallet (not provided). Page 8 of 9

9 Step 13: Insert hardware part L using a small mallet (not provided). Additional Information: Page 9 of 9