(Watertown, SD)
|
|
- Leslie Neal
- 5 years ago
- Views:
Transcription
1 A Notes updated and cosmetic changes REV ph: DESC / PAGE NUMBERS AFFECTED fax: (Sherman, TX) DATE augertools@terex.com Rev 09/13/11
2 Spin-Bottom, Drill Bucket 3/4 wall thickness* Standard 40 barrel length Choice of teeth: Choice of pilot bits (refer to foundation auger tool section for options) Used for drilling loose sandy soil, small cobble stones and mud conditions when material will generally not adhere to the auger flighting. PART NO. CODE NO. DESCRIPTION APPLICATION TX212 TX212 carbide tooth Fits W05 Block TK225 A RC31HD Notes: 1) See Page 56 for Ordering Specifications. 2) Custom options available upon request Heat-treated dirt tooth regular gauge Heat-treated dirt tooth outside gauge tooth Four tip conical carbide 1/2 thick. conical carbide brazed Normal dirt digging situations. Outside tooth for normal dirt digging situations. Rock cutting tooth heat treated for strength and durability. For drilling most soils and broken or laminated rock. GO TO TEETH & BLOCK Rev 09/13/11 2
3 Spin-Bottom, Clean Out Bucket 3/4 wall thickness standard* Standard 40 barrel length 3/4 x 4 steel scraper blade Also known as muck bucket or mud bucket Used to remove fluid type (mud) material from drilled shaft when material generally will not adhere to auger flighting. Rev 09/13/11 3
4 Dump-Bottom, Drill Bucket 3/4 wall thickness* Standard 40 barrel length Choice of teeth Choice of pilot bits (refer to foundation auger tool section for options) Standard manual dump mechanism (auto-dump optional) Used for drilling loose sandy soil, small cobblestones and mud conditions when material will generally not adhere to the auger flighting. PART NO. CODE NO. DESCRIPTION APPLICATION TX212 TX212 carbide tooth Fits W05 Block TK225 A RC31HD Notes: 1) See Page 56 for Ordering Specifications. 2) Custom options available upon request Heat-treated dirt tooth regular gauge Heat-treated dirt tooth outside gauge tooth Four tip conical carbide 1/2 thick. conical carbide brazed Normal dirt digging situations. Outside tooth for normal dirt digging situations. Rock cutting tooth heat treated for strength and durability. For drilling most soils and broken or laminated rock. Rev 09/13/11 4
5 Dump-Bottom, Clean Out Bucket 3/4 wall thickness* Standard 40 barrel length 3/4 x 4 steel scraper blade Choice of pilot bits (refer to foundation auger tool section for options) Manual dump mechanism is standard. Option is the auto dump mechanism. Also known as muck bucket or mud bucket Used to remove fluid type (mud) material from drilled shaft when material generally will not adhere to auger flighting. This bucket is also commonly known as a muck bucket or a mud bucket. Rev 09/13/11 5
6 Latch Mechanism Automatic Dump: Manual Dump: Rev 09/13/11 6
7 Core Barrels 3/4 wall thickness* Standard 40 barrel length 5-tooth cut pattern Inner & outer wear bars Available with bullet tooth, J-tooth, or hex tooth configuration. Relief slots around barrel circumference Coring of fracturable and non-fracturable rock, non-reinforced and reinforced concrete. For use when material cannot be effectively drilled with conventional rock auger tools. PART NO. CODE NO. DESCRIPTION APPLICATION A A A RB1SR-SN RC10F RC31HD Heavy duty block with mounting surface parallel to tooth axis Fractured and non-fractured materials, frozen soils, and abrasive materials. For buckets, barrels, and special applications. For drilling most soils and broken or laminated rock. A RC30F Heavy duty block A RJC2 Tooth,RJC2 (center) For buckets, barrels, and special applications. A RJR2 Tooth,RJR2 (right) A RJL2 Tooth,RJL2 (left) RJ2 Block,RJ2 Accepts RJ2 A A A HEX TEETH 3/4 HEX 1-1/8 HEX Excellent for coring through reinforced concrete (rebar). GO TO TEETH & BLOCK Notes: 1) See Page 56 for Ordering Specifications. 2) Custom options available upon request Rev 09/13/11 7
8 Core Barrel Rings 3/4 wall thickness* Standard 12 ring height 5-tooth pattern Inner & outer wear bars Available with bullet tooth, J-tooth, or hex tooth configuration. Coring of fracturable and non-fracturable rock, nonreinforced and reinforced concrete. Weld on replacement rings for rebuild of existing core barrels. PART NO. CODE NO. DESCRIPTION APPLICATION A RB1SR-SN Fractured and non-fractured materials, frozen soils, and abrasive materials. A RC10F Heavy duty block with mounting surface parallel to tooth axis For buckets, barrels, and special applications. A RC31HD For drilling most soils and broken or laminated rock. A RC30F Heavy duty block A RJC2 Tooth,RJC2 (center) For buckets, barrels, and special applications. A RJR2 Tooth,RJR2 (right) A RJL2 Tooth,RJL2 (left) RJ2 Block,RJ2 Accepts RJ2 A A A HEX TEETH 3/4 HEX 1-1/8 HEX 1-3/4 HEX Excellent for coring through reinforced concrete (rebar). GO TO TEETH & BLOCK Notes: 1) See Page 56 for Ordering Specifications. 2) Custom options available upon request Rev 09/13/11 8
9 Buckets & Barrels Standard barrel length is 40 Spin-Bottom, Clean out Bucket 3/4 wall thickness* Dump-Bottom, Clean Out Bucket and Drill Buckets 3/4 standard wall thickness Core barrels 3/4 standard wall thickness DIAMETER inch mm LENGTH inch mm Note: Custom options available upon request Rev 09/13/11 9
FROST TEXOMA AUGER TOOLING, INC.
www.frosttexomaaugertooling.com FROST TEXOMA AUGER TOOLING, INC. 130 MISSION DR. P.O. Box 728 SHERMAN, TEXAS 75092 TOLL FREE: 1-800-866-6458 OFFICE: 903-421-0536 FAX: 903-421-0537 SINGLE ROW/DBL FLIGHT
More informationFOUNDATION AUGERS. FOR USE ON THE FOLLOWING CARRIES Foundation Drill Rigs
FOR USE ON THE FOLLOWING CARRIES Foundation Drill Rigs PENGO AUGER SOIL CHART Pengo has developed the chart below to help you decide which auger will be best suited for your project. The above triangles
More informationKTSB14 Step Drill Bit #14 Double-Fluted, 3/16 to 7/8" Descriptions Description STEP DRILL BIT #14 DOUBLE-FLUTED, 3/16 TO 7/8"
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 KTSB14 Step Drill Bit #14 Double-Fluted, 3/16 to 7/8" Klein Tools Catalog Number Manufacturer Weight per unit Product
More informationDrilling tools field guide
Drilling tools field guide Ver. 3 Jeffrey Machine Team Jeffrey Sager President Cindy Wood Office Executive Ronald Granberry Plant Manager Casi Prince Office Assistant 2 JEFFREY MACHINE CORPORATE OFFICE
More informationAUGER TOOLS. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD
AUGER TOOLS MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD www..com AUGER TOOLS TABLE OF CONTENTS AUGER OVERVIEW... 3 HOLLOW STEM AUGERS... 4-12 2 1/4" Hollow Stem Augers...
More information53932 Wood Boring Bit, 78" Features. Descriptions. Manufacturer Information. Taxonomies, Classifications, and Categories.
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 53932 Wood Boring Bit, 78" Klein Tools Catalog Number 53932 Manufacturer Klein Tools Weight per unit 0.3500 (lbs/each)
More informationDrilled Shaft Inspector CBT Lesson 2 Equipment and Tools Welcome to the Drilled Shaft Inspector Course. This is Lesson 2, Equipment and Tools.
Drilled Shaft Inspector CBT Lesson 2 Equipment and Tools Welcome to the Drilled Shaft Inspector Course. This is Lesson 2, Equipment and Tools. In this lesson we will discuss the typical equipment and tools
More informationSectional HDD Reamer Package
Sectional HDD Reamer Package Recommended for Sand, Soft Soil, Sand Stone, Coral Mix and Gravel Carbides Internally welded leaving an external groove. Using a thin grinder blade, worn out carbides can be
More informationVIEWING OPTIONS: In Adobe PDF Viewer, from the main toolbar choose View, then Page Display, turn on Two-Up and Show Cover Page During Two-Up
VIEWING OPTIONS: To make our catalog easier to read we recommend using a two page display, as some sections have one page for the exploded view and one for the parts listing. Changing these settings will
More informationNEED HDD TOOLS, PARTS & ACCESSORIES?
NEED HDD TOOLS, PARTS & ACCESSORIES? Visit us on-line at straightlinehdd.com STRAIGHTLINE Produce Profitable Solutions In All Ground Conditions. THE RIGHT REAMER AVAILABLE FOR EVERY DRILL. StraightLine
More informationIPS ROCK BITS CATALOG
IPS ROCK BITS CATALOG 2016-2017 Bearing series Content Features of Bearing Series Baleros series X - (Sellado journal, ¾ a 17 ½ ) Baleros series M - (Sellado journal:motor de Fondo, ¾ a 15 ½ ) Baleros
More informationModule 9 Lecture 35 to 40 DRILLED-SHAFT AND CAISSON FOUNDATIONS
Topics Module 9 Lecture 35 to 40 DRILLED-SHAFT AND CAISSON FOUNDATIONS 35.1 INTRODUCTION 35.2 DRILLED SHAFTS 35.3 TYPES OF DRILLED SHAFTS 35.4 CONSTRUCTION PROCEDURES Use of Casings and Drilling Mud Inspection
More informationTR53 (IADC 5-3-1) MEDIUM SOFT FORMATIONS
TR52 (IADC 5-2-1) SOFT TO MEDIUM SOFT FORMATIONS AMS TR52 designed for efficient drilling of soft to medium formations such as shale, red bed, limestone and other strata of low compressive strength with
More informationHolemaking Products & Accessories
Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get
More informationPower Tool Accessories
Milwaukee Tool MilwaukeeTool.com Power Tool Accessories Masonry Diamond Cutting Diamond Cutting Blades Milwaukee Diamond Cutting Blades are designed to the highest standards only using quality diamonds.
More informationARMADOR Consultancy Machinery Export Ltd.
ARMADOR Consultancy Machinery Export Ltd. Rotary Bored Piling Tools Catalogue 07 ARMADOR Danışmanlık Müm. Makina Metal Sanayi İç ve Dış Tic. Ltd. Şti. Kucukesat Ballibaba Sokak No. 89/A Cankaya 06660 Ankara
More informationMasonry & Specialty Drilling
www.irwin.com Masonry & Specialty Drilling SDS-Plus SPEEDHAMMER POWER FEATURES Powers Through rebar With 125 years of experience in drill bit manufacturing, product innovation, design, and development,
More informationHolemaking Products & Accessories
Holemaking Products & Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy
More informationMasonry & Specialty Drilling
Masonry & Specialty Drilling www.irwin.com SDS-Plus POWERS THROUGH REBAR With 125 years of experience in drill bit manufacturing, product innovation, design, and development, and a full range of products
More informationHollow Stem Auger Modifications
Hollow Stem Auger Modifications Auger Extensions Auger Extensions are used to compensate for the distance from the ground up to the rig. To order these extensions please specify: 1. Length: standards are
More informationInstallation Guide. Capped Cellular PVC Fencing. Table of Contents. Storage and Handling Tools Needed Fence Layout and Locating Posts
Capped Cellular PVC Fencing Installation Guide Table of Contents Storage and Handling Tools Needed Fence Layout and Locating Posts Installation instructions 4 x 4 Over Sleeve Post - 3.5 Rail Privacy Shadowbox
More informationGuided Bore Cutting Head Swivel Style. Solutions for difficult boring material with Pilot Bores
Guided Bore Cutting Head Swivel Style Solutions for difficult boring material with Pilot Bores Celebrating our 50 th year! Michael Byrne Manufacturing is a manufacturer of Horizontal Earth Boring Machines,
More information#3 Domed Head Plow Bolt Standard Thread and Body Length
#3 Domed Plow Bolt Standard Thread and Body Length Flat vs Dome Plow Bolts Flat (per ASME B18.9) Domed Designs Supplied by Earnest (per Cat 1E44) Industry practice is to call a # 3 head plow bolt that
More informationGENERAL DESCRIPTION BUCKETS AUGERS CORE BARRELS SPECIAL TOOLS CASINGS TREMIE PIPES CONTINUOUS FLIGHT AUGERS FULL DISPLACEMENT PILES SPARE PARTS
INTRODUCTION TABLE OF CONTENTS General description GENERAL DESCRIPTION BUCKETS Buckets 11 AUGERS Augers 21 CORE BARRELS Core Barrels 39 SPECIAL TOOLS Special Tools 47 CASINGS Casings 61 TREMIE PIPES Tremie
More informationCode Desc. Ø mm Ø hole mm. Code Desc. Ø mm Ø hole mm. With wire of corrugated steel. Suitable for removing rust, scale etc.. Employee of grinders.
Circular brush steel wire Corrugated steel wire high strength. Suitable for deburring, satin finishing and polishing, to remove rust and metal cleaning. Code Desc. Ø Ø hole Thickness 3002700 77-150x16
More informationFastener Type Chart. Fastener Categories. Sheet Metal Screws Fully threaded screws with a point for use in sheet metal. Abbreviated SMS.
Fastener Categories Wood Screws Machine Screws Thread Cutting Machine Screws Screws with a smooth shank and tapered point for use in wood. Abbreviated WS. Screws with threads for use with a nut or tapped
More informationDrill Bits & Hole Saws
F o r P Drill Bits & Hole Saws r o f e s s i o n a l s. Klein drill bits provide accuracy and consistency for professionals. Made of top-of-the-line materials for longer-lasting performance, Klein drill
More information1.5 C a b l e I n s t a l l a t i o n S o l u t i o n s
1.5 C a b l e I n s t a l l a t i o n S o l u t i o n s H o l e S a w s Starrett HellermannTyton, aware of the needs of the professional user, presents a range of Starrett hole saws. Starrett bi-metal
More informationAppendix B Drilling Methods
Appendix B Drilling Methods B-1. Introduction A brief discussion of available drilling methods is included below. It is not the intent of this manual to include a detailed description of these methods.
More informationPower Tool Accessories
Milwaukee Tool MilwaukeeTool.com Power Tool Accessories Steel Hawg Cutters Threaded Steel Hawg Cutters Faster cutting: Alternating tooth form geometry makes fast work of cutting steel Long life: Abrasion-resistant
More informationESCO Corporation. ESCO Engineered Products
ESCO Blade Products ESCO Corporation With a history of proprietary products and a reputation for engineering and metallurgical expertise, ESCO is a leading manufacturer of technically-rich ground engaging
More informationPRODUCT CATALOGUE AUGERS TEETH WEAR PARTS
PRODUCT CATALOGUE AUGERS TEETH WEAR PARTS Table of CONTENTS FOUNDATION AUGERS Augers & Accessories Foundation Augers...3 Drilling Buckets...4 Taper Rock Augers/Cleaning Buckets...5 Core Barrels...6 Drilling
More information1.5. Installer & Connection Solutions. Starrett. The Hidden Edge Knife. Hole Saws & Kits
1.5 Starrett HellermannTyton, aware of the needs of the professional user, presents a range of Starrett hole saws. Starrett bi-metal hole saws are constructed of hardened, heat and abrasion resisting high-speed
More informationHAMMER chisels & breaker steels
83 HAMMER chisels & breaker steels HAMMER chisels & breaker steels SDS PLUS haer chisels SDS MAX haer chisels pneumatic breaker steels electric breaker steels SDS plus chisels 84 MORTAR RAKING DP-SDS-MRC
More informationMasonry Tools Index. Impact Hammer Drills. Percussion Bits. Spline Bits, Impact Hammer. Percussion Core Drills. Masonry Drill & Sets
Index Impact Hammer Drills Type 606 Slot Drive System...... 112 Type 609 Extra Heavy-Duty...... 114 Masonry Drill & Sets Type 214 All-Purpose, HD........ 110 Type 215 Fast Spiral, HD........ 108 Type 216
More informationThis document downloaded from vulcanhammer.net vulcanhammer.info Chet Aero Marine
This document downloaded from vulcanhammer.net vulcanhammer.info Chet Aero Marine Don t forget to visit our companion site http://www.vulcanhammer.org Use subject to the terms and conditions of the respective
More informationComplete line of Holemaking Products and Accessories
Complete line of Holemaking Products and Accessories I N T R O D U C I N G Holemaking Products Klein Tools has expanded our line of Holemaking products. We have added new flexible drill bits and related
More informationClick Here To View Item at
Click Here To View Item at www.gappower.com (Parts Pages Follow) ATTENTION If you need an Owner s/operator s Manual and/or safety signs (decals), then please contact Danuser. Provide your Model Number
More informationBlackhawk by Proto pliers are manufactured to meet and exceed the demands of the automotive and industrial professionals. Alloy steel construction
PLIERS DESIGNED TO GET THE JOB DONE Blackhawk by Proto are manufactured to meet and exceed the demands of the automotive and industrial professionals. Alloy steel construction and heat-treated for strength
More informationConstruction Tools. Ballantine Mineral and Ground Engineering Tools. Product Catalog
Construction Tools Ballantine Mineral and Ground Engineering Tools Product Catalog 550 SERIES Features sleeved retainers. For use in Augering, Trenching, Milling and HDD backreamers. 550CSF24 Flared body
More informationProtective titanium nitrite coating. Double-fluted design. No. of Hole Sizes 1/8 to 1/2 13. Drill Diameter Sizes (In.) 1/4 to 7/8 11 1/16
Step Drill Bits 35-511 35-512 35-513 35-514 Trust IDEAL step drill bits for precise, repetitive drilling through the toughest materials including brass, carbon steel, cast iron, stainless steel, and more.
More informationSHADOWBOX INSTALLATION FOR: Standard 6 H x 8 W Shadowbox Fence 5 x 5 Routed Posts Dog Ear or Straight-Edge Pickets 1.75 x 3.5 Rail
SHADOWBOX INSTALLATION FOR: Standard 6 H x 8 W Shadowbox Fence 5 x 5 Routed Posts Dog Ear or Straight-Edge Pickets 1.75 x 3.5 Rail Storage and Handling Fence Preparation and Layout Locate and Set Posts
More informationPRIVACY INSTALLATION FOR: Standard 6 H x 8 W Privacy Fence 4 x 4 Post Sleeve & Brackets Dog Ear or Straight-Edge Pickets 1.75 x 3.
PRIVACY INSTALLATION FOR: Standard 6 H x 8 W Privacy Fence 4 x 4 Post Sleeve & Brackets Dog Ear or Straight-Edge Pickets 1.75 x 3.5 Rail Storage and Handling Fence Preparation and Layout Locate and Set
More informationAgricultural Mechanics and Technology Power Tool Safety Rules
Agricultural Mechanics and Technology Power Tool Safety Rules Name: BAND SAW Use: Cutting curves, circles and irregular shapes. 1. Use clean SHARP blades. 2. The teeth should always point DOWN. 3. Adjust
More informationINSTALLATION INSTRUCTIONS for EVERROCK SKIRTING
INSTALLATION INSTRUCTIONS for EVERROCK SKIRTING EVERLOCK SYSTEMS, INC. (ESI) has provided these suggested instructions as installation guidelines. ESI; however, neither installs the panels nor has any
More informationAMS POWER DRILLS. Drill Adapters. AMS Cross Handles & Extensions. AMS Augers for 2" Bait Stations. AMS Augers for 3" Bait Stations
PHONE: 800-635-7330 208-226-2017 ONLINE: www.ams-samplers.com/industry/pest-control.html AMS POWER DRILLS AMS Augers AMS Augers are used to dig holes that fit popular termite bait stations. Their bits
More informationDraft Short Manual On Baptist Well Drilling Methodology
Draft Short Manual On Baptist Well Drilling Methodology First trials in Chimoio Mozambique, June 2006 Arrakis & Agua para todos www.arrakis.nl 2006 Arrakis/Agua para Todos 1 TABLE OF CONTENTS 1 Introduction...
More informationchisels & breakers HAMMER chisels & breaker steels SDS PLUS hammer chisels SDS MAX hammer chisels pneumatic breaker steels electric breaker steels
107 chisels & breakers HAMMER chisels & breaker steels SDS PLUS haer chisels SDS MAX haer chisels pneumatic breaker steels electric breaker steels MASONRY AND CONCRETE SDS plus chisels 108 MORTAR RAKING
More informationAvoiding Common Problems in Saw Preparation
Avoiding Common Problems in Saw Preparation Bruce Lehmann, P.Eng, Ph.D. This talk draws on the expertise of experienced sawfilers, and some research results to show practical techniques and possible problems
More informationMiTek Machinery Service Bulletin
MiTek Machinery Service Bulletin Product(s) Affected Description Cyber, Cyber A/T, SmartSet, SmartSet Pro, EasySet, and CombiSet Saws Installation of a Date 05/16/2003 MiTek 301 Fountain Lakes Industrial
More informationHENSLEY...YOUR WEAR SOLUTIONS SPECIALIST
MINING PRODUCTS TABLE OF CONTENTS Hydraulic Excavator Buckets... 5 Wheel Loaders Buckets... 5 Front Shovel Buckets... 7 Lip Systems...8-9 Cast Lips...8 LHD Edge System...9 XS Tooth System...10-11 TS Tooth
More informationANCHORS SLEEVE ANCHORS BOLT DIAMETER
SLEEVE ANCHORS No hole spotting. No mis-alignments. Simply drill through the fixture into concrete, insert and tighten. Preassembled for fast, easy installation. No special tools necessary; meets federal
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
Tel: 20-5-8 / Fax: 20-59-7 50 Huyler St / So. Hackensack, NJ 070 USA JIG AND RECIPROCATING Starrett offers industrial quality high speed steel edge bi-metal saw blades. These blades have a high speed steel
More informationChapter 25. Other Machining Processes. Materials Processing. MET Manufacturing Processes. Shaping Planing Broaching Sawing Filing
MET 33800 Manufacturing Processes Chapter 25 Other Machining Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Other Machining Processes Shaping
More informationAgri-Fab OWNERS MANUAL. Model No BOX SCRAPER ATTACHMENT (FOR GRADER BLADE)
Agri-Fab OWNERS MANUAL Model No. 45-0358 CAUTION: Read Rules for Safe Operation and Instructions Carefully BOX SCRAPER ATTACHMENT (FOR 45-0354 GRADER BLADE) Safety Assembly Operation Maintenance Parts
More informationMASONRY DRILL and CHISEL
MASONRY DRILL and CHISEL STRAIGHT SHANK MASONRY DRILL 8 Available in common size Made from carbide alloy Drill tip is welded with YG-carbide alloy steel Content of KW00537: Size: 4, 5, 6, 8, 0mm Content
More informationPower Tool Accessories
Milwaukee Tool MilwaukeeTool.com Power Tool Accessories Band Saw Blades Deep Cut Band Saw Blades Overview Maximize your band saw performance and make straight, accurate cuts in a variety of materials with
More informationDRILL RODS & SUBS. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD
DRILL RODS & SUBS MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD www..com DRILL RODS & SUBS TABLE OF CONTENTS DRILL ROD & SUB OVERVIEW...2 API THREAD GUIDE...3 DRILL RODS...
More informationHICKORY SAW & TOOL, INC.
HICKORY SAW & TOOL, INC. 406 9 th Street S.E., Hickory, N.C. 28602 P.O. Box 2407, Hickory, N.C. 28603 Telephone: (828) 324-5585 1-800-762-9899 Fax: (828) 324-5588 1-800-762-6845 www.hickorysawandtool.com
More informationSAW ARBORS B MADE IN THE * * * * * * * USA USA * * * * * * * A B C D E SSA-500
SAW ARBORS B SIDE MILLING SAW ARBORS With Quad Key Drive Assist FEATURES: The only SEMI-FLUSH keyed (removable) arbor for cutter with or without a drive key.0004 TIR Made from domestic 4340 aircraft alloy
More informationSECTION 19: Endwood Fusion Welded Gate Installation Guide
SECTION 19: Endwood Fusion Welded Gate Installation Guide ASSEMBLY AND INSTALLATION FOR: Fusion Welded Gates Gate Frame with Full Size Pickets Privacy & Board on Board California & Shadowbox Gate width
More informationCUTTING TOOLS SECTION Q DEALER PRODUCTS, INC TH ST. GRAND PRAIRIE, TX
CUTTING TOOLS SECTION Q DEALER PRODUCTS, INC 1185 108TH ST. GRAND PRAIRIE, TX 75050 800-999-8828 Section Q INDEX DEALER PRODUCTS, INC 1185 108TH ST. GRAND PRAIRIE, TX 75050 800-999-8828 Q SECTION INDEX
More information> Installation Instructions
SmarterFence BY BEDFORD TECHNOLOGY > Installation Instructions BEFORE YOU START > Check to see if a permit is needed in your area. > Check with your local utility companies to locate any underground utilities.
More informationTABLE OF CONTENTS DIAMOND TOOLS DOWN THE HOLE DRILL RIGS PUMPS DRILLING ADDITIVES & LUBRICANTS SURVEY SYSTEMS ACCESSORIES GEOTECHNICAL EQUIPMENT
TABLE OF CONTENTS DIAMOND TOOLS DOWN THE HOLE DRILL RIGS PUMPS DRILLING ADDITIVES & LUBRICANTS SURVEY SYSTEMS Denver, Colorado, United States, 2008 Jeff Deel ACCESSORIES GEOTECHNICAL EQUIPMENT WWW.FORDIA.COM
More informationCOLLEGE OF ENGINEERING MACHINE SHOP FACILITIES AND PRACTICES Prepared by Mike Allen July 31, 2003 Edited by Scott Morton February 18, 2004
1 COLLEGE OF ENGINEERING MACHINE SHOP FACILITIES AND PRACTICES Prepared by Mike Allen July 31, 2003 Edited by Scott Morton February 18, 2004 I. OBJECTIVE To provide an overview and basic knowledge of the
More informationHEAVY-DUTY BASKETBALL BACKSTOPS
INSTALLATION, OPERATION &MAINTENANCE MANUAL HEAVY-DUTY BASKETBALL BACKSTOPS No. 00195-580 Single Extension No. 00195-582 Double Extension No. 00195-582 5'-0" 5'-0" 5'-0" No. 00195-580 THE OWNER OF THIS
More informationSawing Basics V63WCWO3. Operator Variables That Aid Sawing Performance
Sawing Basics V63WCWO3 Operator Variables That Aid Sawing Performance When making blade recommendations, there are a few questions we need to answer: Which blade do we use? Which tooth pitch do we use?
More informationThe Ultimate Choice in Any Band Sawing Application
LLC The Ultimate Choice in Any Band Sawing Application We at Towerleaf, have a long standing emphasis on quality and perfection. The result of this tradition is our high quality products, that are backed
More informationS E R I E S C ATA L O G U E
SERIES CATALOGUE Safety Precautions WARNINGS Wear working clothes suitable for the operation. In particular, eye protection equipment must be worn to prevent shavings from getting into your eyes. Prepare
More informationStrippers. Global website Sales support. Stripping flat telephone cables
Strippers Stripping flat telephone cables Stripping wires Gripping Cutting wires Wire spring 2 blade stripping coaxial cables is outcome 3 blade stripping coaxial cables 3 is Cutting wires For cutting
More informationWoodworking Tools.
Woodworking Tools Owning quality woodworking tools says a lot about how serious a woodworker you are. Superbly balanced chisels and built tough bar clamps are products that have been designed to give users
More informationInstallation Instructions
Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install in accordance with manufacturer s installation instructions. Failure
More informationSTRENGTH Aligned teeth provide superior gripping power over standard vertical teeth. STRENGTH Diamond serrated jaws provide a firm grip
STRENGTH Aligned teeth provide superior gripping power over standard vertical teeth STRENGTH Diamond serrated jaws provide a firm grip PLIERS AND SNIPS Locking Pliers Slip Joint Pliers Electrician s Pliers
More informationCANE FEED & WASHING TABLE CHAINS
Chains in Cane Feed and Washing Table conveyors are exposed to a highly corrosive, abrasive environment and heavy shock loads. Viking Chains offer several different options to meet these requirements:
More informationROOP LAL Unit-6 (Milling) Mechanical Engineering Department
Notes: Milling Basic Mechanical Engineering (Part B, Unit - I) 1 Introduction: Milling is a machining process which is performed with a rotary cutter with several cutting edges arranged on the periphery
More informationROYAL ULTRA-PRECISION ER COLLETS " TIR
ROYAL C EXPANDING COLLETS q Unlike chucks and most collets that grip the OD of a workpiece, C expanding collets are designed to grip on the ID of a part. q Accu-length design ensures precise workpiece
More informationMaterial HRC Body Handle. Model No. SR-363A. Blister card SR-363B. Individual. Model No. 1PK-3001E. Blister card 1PK-3002E. 7 In 1 Tool. Model No.
CP-3001D / CP-3002D Precision Wire Stripper SR-363A/SR-363B 2 in 1 Round Cable Cutter & Stripper The stripper is processed by CNC machining process to ensure its accuracy. 6 49 5 Ø12 156 Stripping wires
More informationSTEEL RULE. Stock TRY SQUARE
FITTING INTRODUCTION Fitting consists of a handwork involved in fitting together components usually performed at a bench equipped with a vice and hand tools. The matting components have a close relation
More informationPost & Rail. Includes: Crossbuck, 2-Rail, 3-Rail and 4-Rail POST SUPPORT OPTIONS
Post & Rail Includes: Crossbuck, 2-Rail, 3-Rail and 4-Rail STAGGER RAIL ENDS FOR GREATER STRENGTH ALLOW 1-1/2" GAP ON HINGE SIDE OF GATE AND 1-1/4" ON LATCH SIDE OF GATE HARDWARE DIG HOLES 30" MINIMUM
More informationSteel Construction Tools
F o r P Steel Construction Tools r o f e s s i o n a l s. Klein has combined unique design features with skillful engineering and manufacturing to create a superior line of steel construction tools. These
More informationIADC Dull Grading for PDC Drill Bits
IADC Dull Grading for PDC Drill Bits SPE/IADC 23939 First Revision to the IADC Fixed Cutter Dull Grading System ~ 1992 Version 2.4 How is Dull Grading Useful? Quick and simple way to describe the dull
More informationSCREW FLIGHTS and Auger Blades
SCREW FLIGHTS and Auger Blades Applications Conveyor Spirals Foundation, Piling & Digging Augers Screw Piles & Ground Anchors Archimedean Turbines Ribbon Blenders Decanters... and many more Common Problems
More informationCutting, Grinding and Abrasive Accessories
High quality range of abrasive cutting discs, grinding discs and surface preparation accessories engineered for ultimate performance Universal Diamond Blades Cutting and Grinding Discs The essential construction
More informationSharewell, LP. LoTorque Hole Opener
Sharewell, LP LoTorque Hole Opener User Operating Manual Operating Procedures, Installation, and Maintenance Guide Office: 713-983-9818 Fax: 713-983-9820 Hole Opening Planning and Procedures Proper planning
More informationHorizontal Directional Drilling (HDD)
Horizontal Directional Drilling (HDD) Horizontal Directional Drilling (HDD) continues to be the most popular method of installing electrical cable, fiber optics, utility conduits and irrigation lines in
More informationProduct Information Report Maximizing Drill Bit Performance
Overview Drills perform three functions when making a hole: Forming the chip The drill point digs into the material and pushes up a piece of it. Cutting the chip The cutting lips take the formed chip away
More informationDitch Witch 1230 BALLANTINE. Trencher Replacement Parts. American Made. American Strong.
Trencher Replacement Parts American Made. American Strong. Faster Service Better Quality Lower Prices Replacement Parts for Ditch Witch Trenchers Ditch Witch is a registered trade mark of Charles Machine
More informationAssembly, Installation, Maintenance and Operation Instructions For
Assembly, Installation, Maintenance and Operation Instructions For Spacefile LT Storage System January 2010 SPACEFILE INTERNATIONAL CORP. 1145 FEWSTER DRIVE, MISSISSAUGA, ON, CANADA L4W 1A2 TOLL FREE 1
More informationOPERATOR, UNIT MAINTENANCE, AND DIRECT SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) FOR EARTH AUGER ASSEMBLY
OPERATOR, UNIT MAINTENANCE, AND DIRECT SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) FOR EARTH AUGER ASSEMBLY MODEL 1650EH-MS LOWE Manufacturing Company NSN 2590-01-384-6857
More informationPunches. SYNEO, the leading edge in medical automation solutions, is. pleased to announce the ISO 9001:2008 certification of its Texas
Punches SYNEO MANUFACTURERS VERY PRECISE, SUPER SHARP, DURABLE, HOLE-MAKING CUTTERS FOR PLACING HOLES IN CATHETER-BASED MEDICAL DEVICES. SYNEO CUTTERS ARE MANUFACTURED TO VERY TIGHT TOLERANCES TO ENSURE
More informationHDD TOOLING FOR McCLOSKEY
HDD TOOLING FOR McCLOSKEY HDD TOOLING FOR McCLOSKEY TRANSMITTER HOUSINGS: BOLT-ON SIDE-LOAD, BOLT-ON TRANSMITTER HOUSINGS Designed for 2-cell DigiTrak Transmitters Heat-treated, chrome-nickel-moly alloy
More informationDTU Animal Cart Programme
DTU Animal Cart Programme TECHNICAL 25 LIGHT STEEL AND WOOD DONKEY CART RELEASE Development Technology Unit, Department of Engineering, University of Warwick, Coventry, CV4 7AL UK, tel: +44 (0)203 523523
More informationSPECIALTY SMART N CLEVER PRODUCTS
REVERSIBLE DRUM ANGEL 316L STAINLESS STEEL REVERSIBLE DRUM ANGEL Empty or fill a 55-US gallon drum (45 Imperial/205L) in under 90 seconds! Reversible unit fills and empties a drum SMART N CLEVER MORE THAN
More information4/6 variable tooth configuration. Fleem ground teeth for longer life
Disston E127 E128 Notes Hole Saws Bi-Metal Hole Saws Large openings on the backing plate allow for quick removal of cut materials. The diamond-shaped sidewall cutouts increase visibility while cutting.
More informationComparing Guided Auger Boring Techniques under Challenging Conditions
North American Society for Trenchless Technology (NASTT) NASTT s 2014 No-Dig Show Orlando, Florida April 13-17, 2014 TM1-T4-02 Comparing Guided Auger Boring Techniques under Challenging Conditions Matthew
More informationCCC Project Manual WEDGE RAMPS
CCC Project Manual WEDGE RAMPS Project Components & How-To s Wedge Ramp Components Dimensions Length: Make wedge ramps 4 long (half sheet of plywood) when possible. Any shorter and the ramp may too steep.
More informationRebuilding Worn 9N/2N Shift Covers by John Korschot - (March 2010)
Rebuilding Worn 9N/2N Shift Covers by John Korschot - www.johnsoldiron.com (March 2010) If you have a 9N, chances are that your shift cover looks like this. This particular shift cover is an aluminum one
More informationMODEL NO (S ) POST HOLE DIGGER OWNER S MANUAL
MODEL NO. 2100220 (S24045500) POST HOLE DIGGER OWNER S MANUAL ASSEMBLY & OPERATING INSTRUCTIONS THIS SAFETY ALERT SYMBOL IDENTIFIES IMPORTANT SAFETY MESSAGES IN THIS MANUAL. FAILURE TO FOLLOW THIS IMPORTANT
More informationGENERAL MACHINING PRACTICE FOR CMI ELECTROMAGNETIC IRON
GENERAL MACHINING PRACTICE FOR CMI ELECTROMAGNETIC IRON Electromagnetic Iron can be readily machined when proper tool angles are used. Tools should be ground to more acute cutting edge angles than are
More informationQuickbits - Adaptors - Attachments - Drills - Countersinks - Drill Countersinks QUICKBITS
Quickbits - Adaptors - Attachments - Drills - Countersinks - Drill Countersinks QUICKBITS Quickbits Quickbits Index 66 Quickbits Adaptors & Extensions 68 Quickbits Adaptors Socket 66 Quickbits Chuck Mini
More information