AUCTION. At the Premises of RT PRECISION MACHINERY, LP E. Hammond Dr. PORTER (Houston Area), TEXAS (See Directions on Back Page)

Transcription

1 AUCTION PRECISION MACHINE SHOP CLOSING Featuring: (2) HAAS Mdl. EC-1600 Horiz. Machining Centers as new as 2011; (7) HAAS & HURCO Vert. Machining Centers; (4) CNC Lathes Incl. HAAS SL40L-B Long Bed Big Bore new in 2008; (5) Engine Lathes; (4) Vert. Turret Mills; Bandsaws; GEM Microfinisher; Huge Qty. of Precision Machine Accessories & Expendable Tooling; (3) Marking Machines; Huge Qty. Q.C. & Measuring Machines Incl. FARO PLATINUM new in 2006, TRIMOS & TESA-HITE Gauges; Air Compressors; Forklifts; Box Truck & Pickup; MORE! BUILDING FOR LEASE SEE PAGE AXIS 4-AXIS HAAS MDL. EC1600 HORIZONTAL MACHINING CENTER HAAS MDL. EC1600-4X HORIZONTAL MACHINING CENTER ELECTRONIC HEIGHT GAUGES At the Premises of RT PRECISION MACHINERY, LP E. Hammond Dr. PORTER (Houston Area), TEXAS (See Directions on Back Page) 7" SPNDL. HOLE 2008 SAMPLE VIEW OF TOOLING AUCTION: TUESDAY MARCH 28 10:00 A.M. HAAS MDL. SL40L-B MACHINING CENTER On-Site Bidding in Porter, Texas or Bid Via Webcast at 2006 INSPECTION: Monday, March 27, 9:00 A.M. to 4:00 P.M. & Morning of Sale BUYER S PREMIUM: 15% ON-SITE 18% WEBCAST > FARO PLATINUM MEASURING ARM HUGE QUANTITY OF KURT VISES Sale Conducted By: Read Partial Terms and Conditions on Back Page of Brochure Headquarters: 1304 Langham Creek Drive, Suite 454 Houston, Texas Ron Moore, Texas Lic. #7314 HOUSTON DALLAS ST. LOUIS PHONE: (713) FAX: (713) pmi@pmi-auction.com WEBSITE:

2 AXIS AXIS HAAS MDL. EC1600 HORIZONTAL MACHINING CENTER HAAS MDL. EC1600-4X HORIZONTAL MACHINING CENTER HAAS MDL. EC1600, new 2/2011, 32" x 64" tbl., 10,000-lb. tbl. load, 30" built-in 4th axis rotary tbl., 64" X-, 50" Y- and 32" Z-axis travels, CAT-50, 7,500 RPM, 30 HP motor, 30-pos. side-mount ATC, hi-pressure thru spndl. coolant, tool probe, programmable coolant nozzle, chip conveyor, S/N HORIZONTAL MACHINING CENTERS HAAS MDL. EC1600-4X, new 3/2008, 36" x 64" tbl., 10,000-lb. tbl. load, 30" built-in 4th axis rotary tbl., 64" X-, 40" Y- and 32" Z-axis travels, CAT-50, 6,000 RPM, 30 HP 2-spd. geared drive, hi-pressure thru spndl. coolant, 30- pos. side-mount ATC, programmable coolant nozzle, wired for 5th axis, dual chip conveyors, S/N " SPNDL. HOLE 2008 HAAS MDL. SL40L-B CNC LATHE CNC LATHES HAAS MDL. SL40L-B LONG BED, new 1/2008, 25.5" max. cutting dia., 80" max. cutting length, 7" bar. cap., 1,400 RPM, 55 HP motor, 12-pos. turret w/6,000 RPM live tooling, C-axis spndl., 21" dia. 3-jaw hyd. hollow spndl. chuck, tool presetter, Atling Type LE hyd. steadyrest, tailstock, chip conveyor, S/N HAAS MDL. SL20T, new 12/2007, 23" sw. over apron, 9.5" sw. over crossslide, 10.3" turning dia., 2" spndl. bore, C-axis spndl., 4,000 RPM, 20 HP motor, 10-station turret, live tooling, tailstock, 8" hyd. chuck, tool presetter, chip conveyor, parts catcher, S/N FEMCO MDL. HL-55S, new 2007, Fanuc 0i-TC control, 15" dia. 3-jaw hollow spndl. chuck, 49.21" max. turning length, 28.62" max. sw. over bed, 24.21" max. turning dia., 2,500 RPM, 40 HP motor, 4.53" bar cap., 12-pos. vert. turret, hyd. tailstock, chip conveyor, S/N FORTUNE MDL. V TURN-26, Fanuc 0T CNC control, 24.1" sw. over bed, 10.24" turning dia., 13.78" sw. over carriage, 42.91" Z-axis travel, spds.: 35 3,500 RPM, 25 HP motor, 3.43" spndl. thru hole, 10" dia. 3-jaw thru hole chuck, 10-pos. vert. turret, hyd. tailstock, chip conveyor, S/N UA1564. INSPECTION: Monday, March 27, 9:00 A.M. to 4:00 P.M. & Morning of Sale 2

3 AUCTION: TUESDAY, MARCH 28 10:00 A.M. HAAS MDL. VF6 VERT. MACHINING CENTER HURCO MDL. BMC6434/40T VERT. MACHINING CENTER VERTICAL MACHINING CENTERS HAAS MDL. VF6, new 9/1997, 28" x 64" tbl., 64" X-, 32" Y- and 30" Z-axis travels, CAT-40, 10,000 RPM, 15 HP motor, 20-pos. ATC, wired for 4th axis, S/N HURCO MDL. BMC6434/40T, Ultimax dual screen control, 35" x 66" tbls., 64" X-, 34" Y- and 30" Z-axis travels, CAT-40, 8,000 RPM, 20 HP, 24-pos. side-mount ATC, HAAS MDL. VF4 VERT. MACHINING CENTER 1-1/2" aluminum drilled and tapped sub-plate, S/N B AB. HAAS MDL. VF4, new 4/1998, 18" x 52" tbl., 50" X-, 20" Y- and 25" Z-axis travels, CAT-40, 7,500 RPM, 20 HP, 20-pos. ATC, wired for 4th axis, programmable coolant nozzle, S/N HAAS MDL. VF3, new 4/1998, 23" x 52" tbl., 40" X-, 20" Y- and 25" Z-axis travels, CAT-40, 7,500 RPM, 20 HP, programmable coolant nozzle, 20-pos. ATC, Vector 20 HP drive, wired for 4th axis, S/N HAAS MDL. VF3, new 5/1995, 18" x 48" tbl., 40" X-, 20" Y- and 25" Z-axis travels, CAT-40, 7,500 RPM, HAAS MDL. VF3 VERT. MACHINING CENTER 15 HP, wired for 4th axis, 20-pos. ATC, programmable coolant nozzle, S/N HAAS MDL. VF0, new 10/1997, 14" x 26" tbls., 20" X-, 16" Y- and 20" Z-axis travels, CAT-40, 7,500 RPM, wired for 4th axis, 20-pos. ATC nozzle, chip conveyor, S/N HURCO MDL. BMC4020HT/SSM, Ultimax SSM control, 24-pos. ATC, S/N 842SM CC (Note: this machine is currently out of service.) CNC ROTARY TABLES HAAS 16" ROTARY TBL., w/6" thru hole, 14" dia. 3-jaw Adjust-Tru chuck and tailstock; HAAS 12" 4TH AXIS ROTARY TBL., w/3" thru hole, 8" dia. 3-jaw Adjust-Tru chuck and tailstock; HAAS 8" CNC ROTARY INDEXER w/digital box. On-Site Bidding in Porter, Texas or Bid Via Webcast at 2007 HAAS MDL. SL20T CNC LATHE 2007 FEMCO MDL. HL-55S CNC LATHE FORTUNE MDL. V TURN-26 VIEW OF CNC ROTARY TABLES At the Premises of RT PRECISION MACHINERY, LP E. Hammond Dr. PORTER (Houston Area), TEXAS (See Directions on Back Page) 3

4 AUCTION PORTER (Houston Area) TEXAS SUMMIT 28" X 120" ENGINE LATHE AXELSON 27-1/2" X 96" ENGINE LATHE CLAUSING COLCHESTER 15" X 50" ENGINE LATHE KINGSTON 22" X 60" MDL. HD2260 GAP BED ENGINE LATHE INSPECTION: Monday, March 27, 9:00 A.M. to 4:00 P.M. & Morning of Sale ENGINE LATHES SUMMIT 28" X 120", 4-1/4" spndl. hole, spds.: 16 1,250 RPM, taper attach, 2-axis D.R.O., steadyrest, 12" dia. 3-jaw hollow spndl. chuck, rapid traverse, S/N AXELSON 27-1/2" X 96", spds.: RPM, 2-axis D.R.O., 16" dia. 3-jaw chuck, (4) assorted roller jaw steadyrests, S/N KINGSTON 22" X 60" MDL. HD2260 GAP BED, new 1997, spds.: 20 1,200 RPM, 2-axis D.R.O., 3-jaw chuck, inch/metric thdng., taper attach., S/N CH CLAUSING COLCHESTER 15" X 50", spds.: 25 2,000 RPM, inch/metric thdng., 8" dia. 3-jaw chuck, 2-axis D.R.O., taper attach., S/N LTR50S1LFV/ CLAUSING COLCHESTER 13" X 40", spds.: 30 2,500 RPM, inch/metric thdng., 8" dia. 3-jaw chuck, 2-axis D.R.O., collet nose, S/N 5/0014/ VERTICAL TURRET MILLING MACHINES BRIDGEPORT MDL. EZ-TRAK DX PROGRAM- MABLE, 9" x 48" tbl., 2 HP variable spd. head, pwr. drawbar, S/N E. BRIDGEPORT SERIES 1, 9" x 48" tbl. w/pwr. feed, 2 HP motor, 6" riser block, chrome ways, S/N BIRMINGHAM, 9" x 48" tbl. w/pwr. feed, spds.: 60 4,200 RPM, 2 HP motor, digital Quill D.R.O., 2-axis D.R.O., S/N WELLS INDEX MDL. 847, 9" x 48" tbl. w/pwr. feed, spds.: 50 4,200 RPM, 2-axis D.R.O., S/N TILT FRAME VERTICAL BANDSAW MARVEL SERIES 8 MARK II, S/N BRIDGEPORT MDL. EZ-TRAK DX PROGRAMMABLE VERT. TURRET MILLING MACHINE PARTIAL VIEW OF TURRET MILLS On-Site Bidding in Porter, Texas or Bid Via Webcast at CNC MICROFINISHER G.E.M. (GRINDING EQUIPMENT & MACHINERY) MDL. C4155 CNC: This machine puts a mirror finish on axles, bars, etc. GEM polishing head w/4" wide file cap., MachMotion Mdl. H CNC control, GEM variable spd. oscillation drive and film drive, approx. 24" length x 3" dia. max. part cap., filtration system, S/N

5 DEVIBE BARS AMADA 10" MDL. HA250 HORIZ. BANDSAW SCHMIDT MDL. STINGER MARKING MACHINE MARVEL SERIES 8 MARK II TILT-FRAME VERT. BANDSAW AUCTION: TUESDAY, MARCH 28 10:00 A.M. HORIZONTAL BANDSAW AMADA 10" MDL. HA250, new 1998, 1" blade size, auto. index feed, S/N MISCELLANEOUS MACHINES SCHMIDT MDL. STINGER MARKING MACHINE; TELESIS MDL. TMP6100 PIN STAMP MARKING MACHINE; PORTABLE KUNTAI PNEUMATIC MARK- ING MACHINE; DELTA 15" PEDESTAL DRILL PRESS, w/adj. ht. tbl.; CRAFTS- MAN 10" H.D. RADIAL ARM SAW; RYOBI 14" ABRASIVE CUT-OFF SAW; MEYER 25 T. CAP. H-FRAME ARBOR PRESS w/adj. bed; DAREX MDL. B390 DRILL SHARPENER; DAREX DRILL SHARPENER on pedestal stand; MILLER MDL. SRH333 WELDING MACHINE, v., 60% duty cycle, stick leads, S/N JA435577; CLEAN FORCE MDL PRESSURE WASHER. CUTTING TOOLS INDEXABLE CARBIDE DRILLS; SPADE DRILLS AND HOLDERS; INDEXABLE CARBIDE TURNING TOOLS; WIDE SELECTION OF DRILL INDEXES, w/jobber length drills in letter, number and fractional sizes; WIDE SELECTION OF END- MILLS in 2-flute and 4-flute sgl. and dbl. ended; INDEXABLE CARBIDE DRILLS; BORING BARS; TURNING TOOLHOLDERS; REAMERS; CHAMFER- ING TOOLS; CARBIDE ENDMILLS; CARBIDE INSERTS; SPADE DRILLS. PRECISION MACHINE ACCESSORIES (100 s) CAT-50 AND CAT-40 MACHINING CENTER TOOLHOLDERS, DEVIBE BARS; ENDMILL HOLDERS; SHELL MILL HOLDERS; COLLET STYLE HOLD- ERS; TAPPING HOLDERS; RIGHT ANGLE HEAD, 3,000 RPM, No. 40 taper, collet nose; WIDE SELECTION OF NUMBER AND LETTER STENCILS in various sizes; AND BLOCKS; H.D. BORING BARS; ALORIS QUICK CHANGE TOOLPOST AND HOLDERS in several sizes; LIVE AND DEAD CEN- TERS; L&W DIVIDING HEAD w/index plates; VARIOUS 3 AND 4-JAW CHUCKS; KURT 6" AND 8" ANGLE LOCK MILLING VISES; YUASA 12" INDEXER; V BLOCKS; GROUND PARALLELS; (15) 2 X 4 X 6 PRECISION GROUND SET-UP BLOCKS; (9) 2 X 3 X 4 PRECISION GROUND SET- UP BLOCKS; (12) 2 X 4 X 10 PRECISION GROUND SET-UP BLOCKS; 10" H.D. MILLING VISE; LARGE QTY. OF HAND AND POWER TOOLS; (2) 8" X 14" TILTING FIXTURE TBLS.; 2 PC. VISE SETS; PLAIN T-SLOTTED BOX TBL.; (2) 8" X 48' X 16" FABRICATED ANGLE PLATES; DRILLED AND TAPPED TOMBSTONE; DEVLIEG 18" X 24" CAST IRON ANGLE PLATE; WELDING SCREENS; POWER AND HAND TOOLS; POLISHING STAND; RYOBI BENCH TOP BANDSAW; BENCH GRINDERS; 2 T. CAP. LEVER TYPE ARBOR PRESS; TILTING VISES; BRIDGEPORT RIGHT ANGLE AND QUILL MASTER ATTACHMENTS; (2) YUASA 8" INDEXERS; THEMAC TOOLPOST GRINDER. PARTIAL VIEW OF ANGLE PLATES HUGE QUANTITY OF KURT VISES SAMPLE VIEW OF TOOLING PARTIAL VIEW OF TOOL POST AND TOOL HOLDERS PLUG & RING GAUGE TOOL HOLDERS MISCELLANEOUS SHOP SUPPORT EQUIPMENT 5

6 2006 MEASURING ARM FARO PLATINUM, new 2006, roller tripod base, bolt-on machine mount base, Dell laptop computer w/measuring software, transit case, S/N P FARO PLATINUM MEASURING ARM PRECISION INSTRUMENTS TRIMOS MDL. V1000G DIGITAL HEIGHT GAUGE, S/N 1166/I0.00; TESA-HITE MDL. 400 DIGITAL HEIGHT GAUGE, Item No , S/N 3J02702; GAGEMAKER MDL. RG7000 1" TO 4" GAUGE; DAKOTA ULTRASONIC THICKNESS GAUGE; WIDE ARRAY OF THREADED AND NON-THREADED RING AND PLUG GAUGES; (2) MITUTOYO DIAL BORE GAUGE SETS; WIDE ARRAY OF THREADED AND NON-THREADED RING AND PLUG GAUGES; WIDE ARRAY OF MEYER GAGE- MAKER PIN GAUGES; MUEHLER BORE GAUGE; SPI DIAL BORE GAUGE; GAGEMAKER DEPTH GAUGE; SEVERAL MITUTOYO DIAL TYPE BORE GAUGES; GAGEMAKER PG6000 DIAL TYPE GAUGE; GAGEMAKER MDL. PG6001 DIAL TYPE GAUGE; MICROMETER SETS 1" to 12", 0 to 12" and 0 to 6"; MITUTOYO 12" TO 18" MICROMETER SET; (3) MITUTOYO 12" TO 18" MICROMETERS; SHARS 20" TO 24" MICROMETER; 16" TO 20" MICROMETER; END MEASUR- ING RODS; MITUTOYO MDL. SJ210 SURFACE ANALYSER; DEPTH MICROMETERS; PRECISION MACHINE LEVEL; ASSORTED GAGEMAKER SETS; (2) METRIC 1" TO 12" MICROMETER SETS; 1MM DIGITAL CALIPER; SEVERAL BLADE MICROMETERS; (2) 24" X 36" X 4" THK. PRECISION GRANITE SURFACE PLATES, Grade A, on fabricated stand; 48" X 60" X 6" THK. GRANITE SURFACE PLATE, Grade A, on fabricated stand; 36" X 48" X 4" THK. PRECISION GRANITE SURFACE PLATE, Grade A, on fabricated stand; MITUTOYO VERNIER CALIPERS; OKO SEIKI MDL. 896 ROCKWELL HARDNESS TESTER; CLARK MDL. CR-8, S/N 8083; SEVERAL DIGITAL VERNIER CALIPERS; NO. 50 TAPER ATC ALIGNMENT TOOL; HARDENED AND GROUND V BLOCKS; 24" X 36" PRECISION GRANITE SURFACE PLATE on fabricated stand; STANDRIDGE 24" X 36" GRANITE SURFACE PLATE on fabricated stand. VERNIER CALIPERS AND HEIGHT GAUGES O.D. MICROMETERS ELECTRONIC HEIGHT GAUGES AIR COMPRESSORS (2) SPEEDAIRE MDL. 1W072 RECIPROCATING TYPE, new 2002, 10 HP motor, PSI, horiz. tank mtd., S/N 100D22, S/N N.A. PUMA MDL. TUE7580VM RECIPROCATING TYPE, 7-1/2 HP motor, 24.8 CFM, mtd. to 80 gal. vert. tank, S/N INGERSOLL RAND DRYSTAR HOT REFRIGERATED TYPE AIR DRYER. PORTABLE, 1 HP motor, tank mtd. RAW MATERIALS SELECTION OF CARBON STEEL, STAINLESS STEEL AND ALUMINUM on pallets. PIN GAUGE SETS OFFICE FURNITURE & EQUIPMENT DESKS; TBLS.; EXECUTIVE SWIVEL CHAIRS; SECRETARIAL CHAIRS; MODULAR CUBICLE STYLE FURNITURE AND DIVIDERS; LATERAL AND CONVENTIONAL FILE CABINETS; SHELF UNITS; COMPUTERS; PRINTERS; MONITORS; BED TYPE SCANNER; LUNCH ROOM TBLS. AND SHELF UNITS; REFRIGERATOR; SCOTSMAN PRODIGY ICE MACHINE. HUGE QUANTITY MEASURING EQUIPMENT INSPECTION: Monday, March 27, 9:00 A.M. to 4:00 P.M. & Morning of Sale 6 GAGEMAKER GAUGES O.D. MICROMETER SETS (1 OF 2) SPEEDAIRE 10 HP AIR COMPRESSORS

7 HYSTER 7,650-LB. CAP. MDL. S80XL2BC FORKLIFT CLARK 2,800-LB. CAP. MDL. NP300D30 ELECTRIC REACH FORKLIFT GORBEL 1 T. X APPROX. 18' REACH PEDESTAL JIB CRANE HYDRAULIC SHOP TOOLS FORKLIFT HYSTER 7,650-LB. CAP. MDL. S80XL2BC, LP engine, 7,650-lb. 24" L.C., 2-stage mast, 145.7" max. lift ht., side shift, cushion tires, S/N D004D11067Y. ELECTRIC REACH TRUCK CLARK 2,800-LB. CAP. MDL. NP300D30, 2,800-lb. 24" L.C., 198" max. lift, 24 v., charger, 1,750 H.O.M., S/N NP MATERIAL HANDLING EQUIPMENT HYDRAULIC PALLET JACK; (2) HYDRAULIC CAR JACKS; HYDRAULIC BOTTLE JACKS; CHAINS AND SLINGS; EYEBOLTS; HUOT TOOL CARTS AND TOOL RACKS; KENNEDY ROLLER DRAWER TOOL CABINETS; FLAMMABLE MATERIAL STORAGE CABINETS; VIDMAR, KENNEDY AND LISTA ROLLER DRAWER TOOL STORAGE CABINETS; BANDING CART w/banding tools; LADDERS; CANTILEVER ARM MATERIAL STORAGE RACK; TIER DROP STYLE PALLET RACKING; CHIP CARTS; SCISSOR TYPE ROLLER BED HYDRAULIC LIFT CARTS; SEVERAL TECHNO- MAGNETE MAX 250 PERM. LIFTERS; INSCALE DIGITAL PLATFORM SCALE w/d.r.o. box. PEDESTAL JIB CRANES GORBEL 1 T. X APPROX. 18' REACH, 8' ht. under hook, CM Loadstar 1 T. cap. elec. chain hoist. GORBEL 1 T. X APPROX. 18' REACH, approx. 12' ht. under hook, Coffing 1 T. cap. elec. chain hoist w/pwr. trolley. BOX TRUCK 2002 CHEVROLET MDL. W4500, 2 T. cap., turbo intercooled diesel engine, Supreme Corp. box end, 15' hyd. lift gate, TX License No. DTR9249, VIN J8BC4B PICKUP TRUCK 2006 DODGE RAM 2500 MEGA CAB, 3/4 T. cap., Cummins turbo diesel engine, bed liner, bed mtd. toolbox, TX License No. BC16231, VIN 3D7KR29C26G (1 OF 4) TILTING HOPPERS W/COVERS 2002 CHEVROLET BOX TRUCK 2006 DODGE RAM PICKUP TRUCK REAL ESTATE AVAILABLE FOR LEASE 1.55± ACRE AVAILABLE FOR LEASE: total building sq. ft.: 12,000; office sq. ft.: 2,000; inspection area/lab 1,000 sq. ft.; manufacturing/warehouse sq. ft. 9,000; wired for 3-phase 2,000 amps; plumbed for air; insulated and air-conditioned; 16' eave ht.; (1) grade level door; water and sewer available on site through mud district; outside storage. FOR MORE INFORMATION CALL TED MCLEAN (832)

8 P.O. Box Houston, TX PUBLIC INVITED AUCTION: TUES., MARCH 28 10:00 A.M. DATED MATERIAL PLEASE DELIVER PRECISION MACHINE SHOP CLOSING Featuring: (2) HAAS Mdl. EC-1600 Horiz. Machining Centers as new as 2011; (7) HAAS & HURCO Vert. Machining Centers; (4) CNC Lathes Incl. HAAS SL40L-B Long Bed Big Bore new in 2008; (5) Engine Lathes; (4) Vert. Turret Mills; Bandsaws; GEM Microfinisher; Huge Qty. of Precision Machine Accessories & Expendable Tooling; (3) Marking Machines; Huge Qty. Q.C. & Measuring Machines Incl. FARO PLATINUM new in 2006, TRIMOS & TESA-HITE Gauges; Air Compressors; Forklifts; Box Truck & Pickup; MORE! BUILDING FOR LEASE SEE PAGE 7 AUCTION PORTER (Houston Area), TEXAS ASSOCIATION OF MACHINERY AND EQUIPMENT APPRAISERS ATTENTION: PLANT MANAGER OR EQUIPMENT BUYER Presorted First Class Mail U.S. Postage PAID Eugene, Oregon Permit No. 17 DIRECTIONS & LODGING FROM HOUSTON S GEORGE BUSH AIRPORT: Follow the signs out of the airport to I-69. Go north on I-69 for approx. 15 miles to the exit for Northpark Drive. Turn right (east) onto Northpark and proceed to the next intersection at Loop 494. Turn left (north) on Loop 494 and proceed to E. Martin Drive. Turn right (east) onto E. Martin Drive and proceed to Cunnigham Drive. Turn left (north) onto Cunningham Drive and proceed to E. Hammond Drive. Turn left onto E. Hammond Drive and the plant is on that corner. Watch for auction signs. Courtyard by Marriott... (281) Northpark Plaza Drive, Kingwood, Texas Holiday Inn Express... (281) US-59, Kingwood, Texas La Quinta Inn & Suites... (281) US-59, Kingwood, Texas UNABLE TO ATTEND? Bid on-line in real time at TO PARTICIPATE YOU MUST: 1. Register at Use the link to BidSpotter on PMI s website calendar. DO IT NOW. 2. Either send wire transfer, or, overnight delivery service a cashier s check deposit in the amount of $3,000 (U.S. Bidders) or $10,000 (Foreign Bidders) to: Plant & Machinery Inc Langham Creek Drive, Suite 454, Houston, TX Wire transfer instructions can be found at pmi-auction.com You must be registered and have your deposit in the hands of Plant & Machinery, Inc. at least 24 hours prior to the start of the auction. Failure to register and/or failure to send your deposit to Plant & Machinery, Inc. may disqualify you from bidding. DON T WAIT. If you need assistance, don t hesitate to call (713) ALL WEBCAST BIDS ARE SUBJECT TO AN 18% BUYER S PREMIUM. FINANCE YOUR AUCTION PURCHASE Conserve Your Cash & Increase Your Bidding Power AuctionLea$e Provides M&E Financing With Approvals from $5,000 to $999,000 (800) Apply Online: A 15% Buyer s Premium Will Apply On-site. An 18% Buyer s Premium Will Apply to Webcast Bids. See Above Rules for Participation. Everything will be sold to the highest bidder or bidders for cash in accordance with the auctioneer s Customary Terms of Sale, copies of which will be posted on the premises. ALL PAYMENTS MUST BE MADE BY CASH, CASHIER S CHECK, WIRE TRANSFER OR COMPANY CHECK WITH BANK LETTER GUARANTEEING PAYMENT TO PLANT & MACHINERY INC. Here is an example of what your letter should be: Mr. Customer Name is a customer of this bank. This bank will guarantee unqualified payment to PMI on the account listed herein up to the amount of $. This letter is good until April 28, In default of payment of bills in full within the time therein specified, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. All items must be removed by the time announced at the start of the sale. Lots not paid for and/or removed within the time allowed may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charge of resale, will be charged to the defaulting purchaser. The buyer acknowledges that he or an agent has inspected all of the assets upon which he will be bidding and/or does purchase. Buyer agrees to accept assets purchased AS IS, WITH ALL FAULTS AND WITH REMOVAL AT BUYER S RISK AND EXPENSE. THE AUCTIONEER EXPRESSLY DISCLAIMS ON THE QS PARTIAL TERMS & CONDITIONS PART OF THE AUCTIONEER AS AGENT AND THE SELLER, ANY WARRANTY AS TO FITNESS OR USABILITY OF ALL THE ASSETS, AND THE BUYER EXPRESSLY WAIVES ANY CLAIM IN RESPECT TO ANY POSSIBLE FUTURE USE OF ANY ASSET PURCHASED FOR ANY PURPOSE WHATSOEVER. The buyer does hereby assume and does agree to indemnify and hold the auctioneer harmless from any future claim which shall pertain to the fitness or use of that asset as being purchased. Riggers, movers, electricians and buyers performing work at the Auction Site must provide PMI with evidence of insurance. The insurance coverage must be at a level acceptable to PMI and to the seller. PMI reserves the right to withdraw items, alter the order of the sale, accept bids from the seller, and group lots as it may deem appropriate. This auction may include consignment items. Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained, or contained in our catalog. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the auction. Although it is not likely, auction sales are subject to cancellation or postponement. Kindly contact auctioneer prior to attendance. These terms and conditions may be modified or supplemented by language in the catalog available at the sale site or by announcement at the start of the sale. Bidders should be attentive to those announcements and to the catalog language.