$50.00 net All prices are each. Taxes extra as applicable Our plant, stocking warehouse.
|
|
- Geoffrey Brooks
- 6 years ago
- Views:
Transcription
1 AURORA BRAND Pipe Hangers SCHEDULE: H-2010 EFFECTIVE: 5-Apr and Supports 2010 Subject to change without notice. GENERAL NOTES MINIMUM INVOICE: S: F.O.B. : PAYMENT TERMS: OTHER TERMS: ONTARIO 1387 Cornwall Road Oakville, ON L6J 7T5 PHONE (2283) FAX TOLL FREE (2283) HALIFAX SALES OFFICE PHONE (2283) $50.00 net All prices are each. Taxes extra as applicable Our plant, stocking warehouse. Any single order having a total order value of $1000 or more for shipment to a single destination, will have full freight allowed at the lowest published rate for the most economical way. Shipments to remote locations may, at our option, be subject to less than full freight allowance. Net 30 days. The "General Terms and Conditions" apply to all orders. ALBERTA rd Avenue NW Edmonton, AB T6B 3G2 BRITISH COLUMBIA #4 480 Audley Boulevard Delta, BC V3M 5S4 PHONE PHONE FAX FAX TOLL FREE TOLL FREE QUEBEC SALES OFFICE TOLL FREE (2283)
2 Contents Description Page Description Page Adjustable Swivel Ring Hangers 3 2 Hole Pipe Straps 14 Clevis Hangers 4,5,6, 12 Welded Beam Brackets 15 Riser Clamps 6,7 Pipe Rollers 15,16 2 Bolt Pipe Clamps 7,8,12 Adjustable Socket Ends 15 Heavy Duty Short Strap 8 Roller Hangers/Chairs 17 3 Bolt Pipe Clamps 9 Insulation Shields 17 U-Bolts/Coach Screws 10,11,12 Protections Saddles 18 C-Clamps 11 Forged Steel Turnbuckle 19 Top Beam Clamps 11 Forged Steel Clevis W/Pin 19 Offset Pipe Clamp 13 Weldless Eye Nuts 19 Underground Bell Clamp 13 Side Beam Brackets 19 One Hole Pipe Strap 13 Pipe Stays/Strut Components 20,21 Hook and Tie Bolt 13 Ceiling Flanges/Rod Couplings 21 Split Ring Hangers Threaded Rod/ Strut Channel 2
3 SWIVEL RING HANGER ZINC PLATED ROD SIZE PIPE SIZE 3/8" 1/2" 3/8" 3/4" 3/8" 1" 3/8" 1 1/4" 3/8" 1 1/2" 3/8" 2" 3/8" 2 1/2" 3/8" 3" 3/8" 4" 1/2" 5" 1/2" 6" 1/2" 8" CTN. QTY A SWIVEL RING HANGER COPPER PLATED ROD SIZE PIPE SIZE CTN. QTY /8" 1/2" /8" 3/4" /8" 1" /8" 1 1/4" /8" 1 1/2" /8" 2" /8" 2 1/2" /8" 3" /8" 4" EPOXY COATED SWIVEL RING HANGER A 250 C A 275 E COP SIZE I P PIPE SIZE CTN. QTY /2" 3/8" /4" 1/2" " 3/4" /4" 1" /2" 1 1/4" " 1 1/2" " /2" /2" " " " "
4 LIGHT DUTY CLEVIS HANGER ZINC PLATED ROD CTN. PIPE SIZE SIZE QTY /2" 3/8" /4" 3/8" " 3/8" /4" 3/8" /2" 3/8" " 3/8" /2" 1/2" " 1/2" /2" 1/2" " 1/2" " 5/8" " 3/4" " 3/4" " 12" 7/8" 7/8" EPOXY CTD. CLEVIS HANGER A 210 A 280 E COP SIZE I P PIPE SIZE CTN. QTY /2" 3/8" /4" 1/2" " 3/4" /4" 1" /2" 1 1/4" " 1 1/2" " /2" /2" " " " " COPPER CLEVIS HANGER A 310 C PIPE SIZE ROD SIZE CTN. QTY /2" 3/8" /4" 3/8" " 3/8" /4" 3/8" /2" 3/8" " 3/8" /2" 3/8" " 3/8" " 3/8"
5 STANDARD CLEVIS HANGER ZINC PLATED A 235 ROD CTN. PIPE SIZE SIZE QTY /2" 3/8" /4" 3/8" " 3/8" /4" 3/8" /2" 3/8" " 3/8" /2" 1/2" " 1/2" /2" 1/2" " 5/8" " 5/8" " 3/4" " 3/4" " 7/8" " 7/8" " 16" 18" 1" 1" 1" " 1 1/4" " 1 1/4" STANDARD CLEVIS HANGER BLACK A 235 B ROD CTN. PIPE SIZE SIZE QTY /2" 3/8" /4" 3/8" " 3/8" /4" 3/8" /2" 3/8" " 3/8" /2" 1/2" " 1/2" /2" 1/2" " 5/8" " 5/8" " 3/4" " 3/4" " 7/8" " 7/8" " 1" " 1" " 1" " 1 1/4" " 1 1/4"
6 CLEVIS HANGER F/ DUCTILE IRON PIPE OR A/C PIPE A " " " " STANDARD RISER CLAMP ZINC PLATED A /2" /4" " /4" /2" " /2" " /2" " " " " " " " " " " STANDARD RISER CLAMP BLACK A 150 B /2" /4" " /4" /2" " /2" " /2" " " " " " "
7 SHORT TONGUE RISER CLAMP A " " " COPPER PLATED RISER CLAMP A 325 C /2" /4" " /4" /2" " /2" " " STANDARD 2 BOLT CLAMP ZINC PLATED A /2" /4" " /4" /2" " /2" " /2" " " " " " " " " " " "
8 STANDARD 2 BOLT CLAMP BLACK A 125 B /2" /4" " /4" /2" " /2" " /2" " " " " " " " " " " " HEAVY 2 BOLT CLAMP A " " " " " " " " HEAVY DUTY SHORT STRAP A /4" " /4" /2" " /2" " " " " " " " -- 8
9 LIGHT DUTY 3 BOLT PIPE CLAMP A /4" " /4" /2" " /2" " /2" " " " " " " " " STANDARD 3 BOLT PIPE CLAMP A /2" /4" " /4" /2" " /2" " " " " " " " " " "
10 STANDARD BLACK U BOLTS W/NUTS A /2" /4" " /4" /2" " /2" " /2" " " " " " " " " " " " STANDARD ZINC PLATED U BOLTS W/NUTS A /2" /4" " /4" /2" " /2" " " " " " " " " " " " "
11 COACH SCREW ROD A 425 TOTAL ROD SIZE LENGTH /8" 4" /8" 6" /8" 8" /8" 10" /8" 12" /2" 6" /2" 8" /2" 12" #2 X 16 WOOD DRIVE SCREWS A 05 SCREW SIZE CTN. QTY X C CLAMP C/W LOCK NUT A /8" /2" /8" /4" TOP BEAM CLAMP /8" /2" /8" /4" WIDE MOUTH TOP BEAM CLAMP /8" /2"
12 STAINLESS STEEL U BOLT W/NUTS A 175 SS /2" /4" " /4" /2" " /2" " " " * Prices subject to change without notice STAINLESS STEEL 2 BOLT PIPE CLAMP A 125 SS /2" /4" " /4" /2" " /2" " " " " * Prices subject to change without notice STAINLESS STEEL CLEVIS HANGER A 235 SS /2" /4" " /4" /2" " /2" " /2" " " " 8" " " * Prices subject to change without notice 12
13 OFFSET PIPE CLAMP A /4" " /4" /2" " /2" " " " " " " " -- UNDERGROUND BELL CLAMP A " " " " " " " ONE HOLE PIPE CLAMP A /8" /2" /4" " /4" /2" " HOOK TIE BOLT F/ W.W. A /4" 25 13
14 ZINC PLATED HINGED SPLIT RING HANGER A 131 ROD CTN. PIPE SIZE SIZE QTY /2" 3/8" /4" 3/8" " 3/8" /4" 3/8" /2" 3/8" " 3/8" /2" 1/2" " 1/2" " 1/2" COPPER COATED HINGED SPLIT RING HANGER A 131C ROD CTN. PIPE SIZE SIZE QTY /2" 3/8" /4" 3/8" " 3/8" /4" 3/8" /2" 3/8" " 3/8" /2" 1/2" " 1/2" " 1/2" ZINC PLATED 2 HOLE STRAP A /8" /2" /4" " /4" /2" " /2" " "
15 WELDED BEAM BRACKET L/ BOLT A /8" /2" /8" /4" /8" " /8" /4" /2" /4" " /4" -- WELDED BEAM BRACKET C/W BOLT ROD SIZE CTN. QTY. A 330 B /8" /2" /8" /4" /8" " /4" PIPE ROLLER A 320 ADJUSTABLE SOCKET ENDS A 46 PIPE SIZE SOCKET NUM. ROD/AXLE SIZE CTN. QTY. CTN. QTY #1 3/8" - 3/8" #3 5/8" - 5/8" #5 7/8" - 7/8" #7 1" - 1 1/4" #9 1 1/2"-1 1/2" /2"-2" /2"-3" /2"-4" " " " " " " #2 1/2" - 1/2" #4 3/4" - 3/4" #6 1" - 1" #8 1 1/4"-1 1/4" --
16 SINGLE PIPE ROLL A " /4" /2" " /2" " /2" " " " " " " " " " " " " -- ADJ. PIPE ROLL C/W 12" ROD A " /4" /2" " /2" " /2" " " " " " " " " " " " " -- 16
17 STANDARD ROLLER CHAIR A /2"-2" /2"-3" /2"-4" " " " " " " " " -- 20" -- STANDARD ROLLER HANGER A /2"-2" /2"-3" /2"-4" " " " " " " 16" " " -- GALVANIZED INSULATION SHIELD A 203 SIZE # CTN. QTY. SHIELD
18 80-95 SERIES PIPE SIZE 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 3 1/2" 4" 5" 6" 8" 10" 12" 14" 16" 18" SERIES PIPE SIZE 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 3 1/2" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20 INDUSTRIAL SERIES STEEL PIPE PROTECTION SADDLES A #80, 84, 88, 90, 92, 95 1" INSULATION 1 1/2" INSULATION 2" INSULATION # 80 #84 # /2" INSULATION 3" INSULATION 4" INSULATION # 90 # 92 #
19 FORGED STEEL TURNBUCKLE A /8" /2" /8" /4" /8" " /8" /4" /2" FORGED STEEL CLEVIS C/W PIN A /8" /2" /8" /4" /8" " /4" /2" /4" " WELDLESS EYE NUT A /8" /2" /8" /4" /8" " /8" /4" /2" " -- SIDE BEAM BRACKET A /8" /2" /8" /4" /8"
20 STANDARD PIPE STAY A /2" C /4" C " C /4"C /2" C /2" IP " IP EXTENDED PIPE STAY A /2" C /4" C " C /4"C STRUT NUTS W/ SPRING A /4" /8" /2" STRUT NUTS L/ SPRING A /4" /8" /2" -- 20
21 STRUT CLAMPS FOR PIPE A /2" /4" " /4" /2" " /2" " /2" " " " " -- ZINC PLATED CEILING FLANGE A 22 Z /8" /2" ZINC PLATED ROD COUPLING A /4" /8" /2" /8" /4" /8" " /4" /2" -- ZINC PLATED SWIVEL NUTS A 01 - A /8" /2"
22 THREADED ROD BLACK 10' LENGTHS A 925 WEIGHT PER ROD SIZE C' /4" /16" /8" /2" /8" /4" /8" " 223 THREADED ROD PLATED 10' LENGTHS A 926 WEIGHT PER ROD SIZE C' /4" /8" /2" /8" /4" /8" " THREADED ROD STAINLESS STEEL 6' LENGTHS A 926 SS WEIGHT PER ROD SIZE C' /8" /2" /8" /4" /8" 170 STRUT CHANNEL ROD SIZE WEIGHT /8"x1-5/8"x3' /8"x1-5/8"x10'
AURORA BRAND Pipe Hangers and Supports
AURORA BRAND Pipe Hangers and Supports SCHEDULE: H-2015-1 EFFECTIVE: November 15 2015 Subject to change without notice. GENERAL NOTES MINIMUM INVOICE: S: F.O.B. : PAYMENT TERMS: OTHER TERMS: ONTARIO 4151
More informationAURORA BRAND Pipe Hangers
AURORA BRAND Pipe Hangers SCHEDULE: H-2017 EFFECTIVE: March 6 and Supports 2017 Subject to change without notice. GENERAL NOTES MINIMUM INVOICE: S: F.O.B. : PAYMENT TERMS: OTHER TERMS: ONTARIO 4151 North
More informationCopper Tubing Hangers Clevis Hangers. Copper Tubing Hangers
Copper Tubing Hangers Clevis Hangers Copper Tubing Hangers Fig. CT-69 Adjustable Swivel Rug Fig. CT-138R Fig. CT-65 Fig. CT-109 Extension Split Light Weight Adjustable Clevis Fig. CT-99 & CT-99C Split
More informationIndex Pipe Hangers and Straps
Index Pipe Hangers and Straps Fig. 1 Standard Clevis Hanger MSS-SP-69, Type 1 WW-H-171E, Type 1 Page 14 Fig. 1CI Clevis Hanger for A.W.W.A. Page 16 Fig. 81 Clevis Hanger WW-H-171E, Type 12 Page 70 Fig.
More informationSuperstrut. Metal Framing. Beam Clamps. Design Loads. Finishes and Special Materials
Loads Where design loads are indicated, they provide for a safety factor of 3 in conformance with the merican Standard Code for Pressure Piping. For more information, see page 57 for Engineering Data and
More informationSuperstrut. Metal Framing. Beam Clamps. Design Loads. Finishes and Special Materials
Loads Where design loads are indicated, they provide for a safety factor of 3 in conformance with the merican Standard Code for Pressure Piping. For more information, see page 57 for Engineering Data and
More informationPRODUCT CATALOG Meadowview Rd Junction City, OR fax
Made in the USA, since 1972 PRODUCT CATALOG Nichols Manufacturing 292 Meadowview Rd Junction City, OR 97448 541-485-60 sales@nicholsmanufacturing.com www.nicholsmanufacturing.com 122616 Nichols Manufacturing
More informationBeam and Purlin Clamps Beam Clamps
Metal Framing & Cable Tray Steel City Hangers, Clamps & Fasteners Beam and Purlin Clamps Beam Clamps Fits beam flanges to 2" Supports 4" and 8" threaded rod, S-hooks, electrical boxes, conduit and bridle
More informationWire Mesh Cable Tray System for Channeling of Cable Wiring
Wire Mesh Cable Tray System for Channeling of Cable Wiring A Simple-to-Install basket for safe and proper installation of facility wiring in the ceiling and under the floor. Wall Mount Ceiling Mount s
More informationSWAY BRACE PIPE ATTACHMENT FIG. 010
Function: Designed for bracing pipe against sway and seismic disturbance. The pipe attachment component of a sway brace system used in conjunction with a PHD Manufacturing structural attachment fitting,
More informationMax. Rec. Load. Wt. Per Inch lbs. kn lbs. kn lbs. kg. Wt. Per Inch lbs. kn lbs. kn lbs. kg 750 F (399 C)
FIG. 10 FIG. 15 & 15L Function: Designed for use in pipe hanger assemblies. (Type 304 or 316 Stainless Steel upon request) Ordering: Specify figure number, rod size, length (), material, and finish. 650
More informationRESIDENTIAL HANGERS. ABBREVIATED CATALOG & BASE PRICE LIST RH-0608 (Cancels Base Price List RH-0308)
RESIDENTIAL HANGERS ABBREVIATED CATALOG & BASE PRICE LIST RH-0608 (Cancels Base Price List RH-0308) CONSTRUCTION FASTENERS TERMS and CONDITIONS of SALE Effective 1-3-2007 1. PRICES & DESIGNS: Prices and
More informationOffering a full range of anchoring and tie down systems including:
Offering a full range of anchoring and tie down systems including: BE SURE TO CONSULT LOCAL REGULATORS FOR CODE QUESTIONS AND THE MANUFACTURERS INSTALLATION MANUAL FOR PROPER MATERIALS. Anchors Pan Systems
More informationM2 Antenna Systems, Inc. Model No: HFTB6MXP20-2X2
M2 Antenna Systems, Inc. Model No: HFTB6MXP20-2X2 FRONT OF SYSTEM REAR OF SYSTEM SPECIFICATIONS: Model... HFTB6MXP20-2X2 Band... 6M Antenna... 6MXP20 T-Brace... Y Cross Boom Dia... 4.5 Wind Load w/o Ant.....
More informationSuperstrut Stainless Steel Channels and Accessories
In this section... Superstrut Stainless Steel Channels and Accessories Superstrut Stainless Steel Channels and Accessories Channels...46 Channel Fittings and Hardware...47 49 Clamps and Hangers...50 52
More informationThe fast track. in cable management systems for power, voice and data cables. Reduce installation time up to 50%
The fast track in cable management systems for power, voice and data cables Reduce installation time up to 50% Save TIME QuikLok tray connections at record speed In any project, installation time is key.
More informationHEARNE STEEL CO., INC.
HEARNE STEEL CO., INC. INDUSTRIAL PARK 1011 VAUGHN LANE HEARNE, TEXAS 77859 Leading Manufacturers Of Chain Link Fence Fittings J.C. AMOS, (1921-2008) OFFICE ADDRESS: R.W. AMOS, President P. O. BOX 1239
More informationMAXIMA TRADITIONAL JUST ASK FOR THE WOOD GATE HARDWARE QUICK & EASY TO INSTALL AVOID TYPICAL INSTALLATION PROBLEMS END USER SATISFACTION
ORNAMENTAL GATE HARDWARE JUST ASK FOR THE MAXIMA TRADITIONAL QUICK & EASY TO INSTALL Patent No. 4,871,203 No. 4,690,440 j j j j j PRE-ASSEMBLED You do not have to put it together EASIEST INSTALLATION Two
More informationFactory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
More informationcontent Introduction Some good reasons to use SMARTr products Reducers, Plugs Conduit Reducer Stopping Plug
CONTENT 1 2 Introduction Some good reasons to use SMARTr products G.I. CONDUITS SMARTr BS4568 : PT1 : 1970 Class 4, IEC 61386-21 : 2004 IEC60614-2 - 1 : 1993, BS EN 50086-2 -1 : 1996 SMARTr BS4568 : PT1
More informationB3199R - Ceiling Flange B3199RCT - Ceiling Flange Dura-Copper Coated. TOLCO Fig All Steel Ceiling Plate. 216 Eaton
ttachments 3199R - eiling Flange 3199RT - eiling Flange ura-opper oated Size Range: 3 /8"-16 & 1 /2"-13 rod Material: Malleable Iron (Stainless Steel Type 304 available) Standard 3199RT is UR-OPPER coated
More informationAt Ridgeline Fasteners Ltd.
About Ridgeline Fasteners Ltd. At Ridgeline Fasteners Ltd. we have over twelve years experience importing, distributing, stocking and supplying fasteners to the manufacturing industry. We know how to meet
More informationPart No. Thread Size B Design Load Approx. Wt./100 A in. (mm) Lbs. (kn) Lbs. (kg)
ttachments Fig. 3199R - eiling Flange Fig. 3199RT - eiling Flange ura-opper oated Size Range: 3 /8"-16 & 1 /2"-13 rod Material: Malleable Iron (Stainless Steel Type 304 available) Standard 3199RT is UR-OPPER
More informationMATERIALS LIST - DARQUEST INDUSTRIES, CORP.
MATERIALS LIST - DARQUEST INDUSTRIES, CORP. Order these items direct from Darquest QTY ITEM # DESCRIPTION PRICE ea. EXTENSION NAILS 0015 20d (3 3/4") ARDOX DECK NAILS -per lb. 0010 10d (2 7/8") ARDOX DECK
More informationClassic Roll Tarp. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 1944 Classic Roll Tarp Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com
More informationPipe Hangers, Supports and Accessories Base Price List. v
Pipe Hangers, Supports and Accessories Base Price List. v 04302018.1 v 04302018.1 pipe hangers & supports, strut & strut accsessories base price list Filling industry s needs for pipe hangers, supports,
More informationH HD Adult Wheelchair Swing Frame & Hangers(perm) IMPORTANT
Page 1 IMPORTANT PLEASE READ THESE INSTRUCTIONS BEFORE COMMENCING ASSEMBLY. All equipment must be installed in accordance with these instructions. Check your shipment against Bill of Lading and Parts list.
More informationKhathij Industrial Fasteners
Dear Sir/Madam, Khathij Industrial Fasteners This is Saqubar Sadique representing 'KHATHIJ INDUSTRIAL FASTENERS' from Chennai, India. We 'Khathij industrial fasteners' like to introduce us as a Stockist
More informationClassic Roll Tarp. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 1944 Classic Roll Tarp Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com
More informationPARTS MANUAL Rev A
PARTS MANUAL 4000394 Table of Contents Part Index for Trailer --------------------------------------------- 2 Trailer Figure ----------------------------------------------------- 6 Trailer Figure 2 -----------------------------------------------------
More informationWESTERN WIRE PRODUCTS
WESTERN WIRE PRODUCTS Celebra ng 100 years of Quality and Service 1914 2014 Thanks to our dedicated employees and customers we are celebra ng 100 years of being in business and we look forward to servicing
More informationPOLE LINE HARDWARE POLE LINE HARDWARE. HI-LINE UTILITY SUPPLY CO. Phone: Fax:
146 MACHINE BOLTS w/ square nut Rolled threads; s six inches or longer have con-type points. Hot dip galvanized. 860412 3/8" 4.5" 3" 250 8706 6" 3" 100 8707 7" 3" 100 8708 1/2" 8" 4" 100 8710 10" 4" 50
More informationFRONT AND REAR HOOD ASSEMBLY (GRAIN CART) REF PART# DESCRIPTION QTY RETAIL
FRONT AND REAR HOOD ASSEMBLY (GRAIN CART) 1 0001-014311 GRAIN CART STEEL FRONT HOOD 1 1A 0001-014313 GRAIN CART 5" OFFSET STEEL FRONT HOOD 1 2 0001-014312 GRAIN CART STEEL REAR HOOD 1 N/A 0001-014901 GRAIN
More informationIF YOU DON T SEE IT HERE
www.smithfast.com Drills & Taps & Bits Screws Cotter Drilling Bolts / Hex Capscrews Lag Carraige Hitch Grade 8 Machine Grade Elevator 5 Sheet Spring Metal Roll Grade Eye 2 Square Taper Head set A325 Hex
More informationPIPE/CONDUIT SUPPORTS
PIPE/CONDUIT SUPPORTS Pipe/Conduit Clamps...102-105 Unicushion... 106 Pipe & Tubing (Cush-A-Clamp ) Clamps...107-110 Pipe Hangers... 111 Pipe Rollers...111-112 Pipe Brackets... 113 Reference Tables...114-120
More informationPole Line Hardware. Heavy duty spool rack SS401E 1 9 1/ SS802E / SS803E /
Heavy duty spool rack CATALOGUE NUMBER OVERALL WEIGHT (100 pcs) STD NO. WIRES LENGTH (in.) lb kg PKG SS401E 1 9 1/2 300 136.3 10 SS802E 2 17 1/2 520 236.3 5 SS803E 3 25 1/2 780 354.5 5 SS804E 4 33 1/2
More informationWheeler Rex Ashtabula, Ohio Tel: Fax:
Wheeler Rex Ashtabula, Ohio Tel: 800 321 7950 Fax: 440 992 2925 wheeler@wheelerrex.com www.wheelerrex.com December 2012 There are three different types of shell cutters. Nominal Hole Size Part No. 4" 3395
More informationTable of Contents. Prime Industries, Inc.
MARINE HARDWARE Table of Contents Deck Cleats...1-2 Chocks...2 Deck Fills...3 Top Fittings... 4-6 Pull Pins & Accessories...6-7 Noise Reduction Top Fittings... NEW!...7 Snap Hooks & Additional Hardware...8
More informationWire Mesh Cable Tray System for Channeling of Cable Wiring
Wall Mount A Simple-to-Install basket for safe and proper installation of facility wiring in the ceiling and under the floor. Floor Mount Wire Mesh Cable Tray System for Channeling of Cable Wiring Features
More informationSIGN MOUNTED BEACON SIG-027-A SINGLE SIGN MOUNTED FLASHING BEACON INSTALLED ON ONE WOOD POST DETAIL "A-1"
1 1/2" x 60" Galvanized (thread both ends) Top Bolt See Detail "A-1" and Slotted Channel Parallel Conduit Clamp Warning Sign 3 Equal Bolt Spacings (3 places at 12" min. spacing) (1) 3/8"x 7" min. (4"x
More informationInstruction Sheet For: SCM-2
Instruction Sheet For: SCM-2 For more information, please contact us at: 345 Log Canoe Circle, Stevensville, Maryland 2666 Toll Free: 877.28.269 Phone: 40.643.6390 Fax: 40.643.665 www.videomount.com 27
More informationP2784 3" (76.2) (31.8) 25 to 45 PFL2-37
P289 (2.0) (.) 2 (.2) 2 (2.4) 2 (.2) hreaded esign (Safety Factor of 4) (angles 2 ) - 0 Lbs (2.4 kn) ) - 0 Lbs (.4 kn) Safety Factor 4 orque: Ft-Lbs (8 N m) PFL2- to (.2 to 9.) 2 2 2 2 to 4 t/00 : Lbs
More informationCat. No. A1200 A1200-S A1200-KO. Finishes & Materials. E142-1/4x100EG 1/4 x 1 A100-5/16EGC A100-3/8EGC. Standard Finish: Electrogalvanized
Superstrut Support Systems 1-5/8 in. x 1-5/8 in. Channel and Hardware Superstrut 1-5/8 in. x 1-5/8 in. - 12 Gauge Channel Type A Solid Base Punched Description Solid base -P Punched -HS Half slots Half
More informationKwik-Lock. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 1944 Installation Instructions Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com
More informationFord Water Meter Couplings & Accessories
Section H 2/2001 Ford Water Meter Couplings & Accessories The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260/563-3171 FAX: 1-800-826-3487 Overseas
More informationPole Line Hardware. Heavy-Duty Spool Rack (200 A) No. of Wires. Anti-Vibration Kit for Spool Rack. Heavy-Duty Spool Rack (400 A) No.
Heavy-Duty Spool Rack (200 A) SS401E - SS802E - SS803E - SS804E No. of Wires Overall Length SS401E 1 9-1/2 300 136.3 10 SS802E 2 17-1/2 520 236.3 SS803E 3 25-1/2 780 354.5 5 SS804E 4 33-1/2 1040 472.7
More informationCABLE TRAYS & STRUTS CATALOUGE
CABLE TRAYS & STRUTS CATALOUGE We are the Manufacturer for Copper Bonded Ground Rod and Contract Manufacturing Company for other products made from Brass, Copper, Gunmetal, Bronze, Cast Iron, Malleable
More information8" PIVOT. Model 8000 Pivot - Prior to Feb 2002
" PIVOT Model 000 Pivot - Prior to Feb 00 " Pivot Table of Contents Description Rev. # Pg. # Overall Assembled View... 0-0... Legs & Braces... 0-0... Ladder... 0-0... Collector Ring "J" Tube... 0-0...
More informationDown Stage Right -Theatrical and Entertainment Rigging Supplies
Shackle Plates There are five uniquely different designs in the Shackle Plates Dynasty. Each one allows you the freedom of choice as you design the rigging requirements of your scenery, as well as meeting
More informationfax
310-324-7622 fax 310-324-7644 Founded in 1998, Commercial Scaffolding Sales, Inc. (CSSI) has quickly established itself as the premier source of scaffold products for North American markets. CSSI carries
More informationDesign Engineering Manufacturing. CEMA Stock Components
Design Engineering Manufacturing CEMA Stock Components KWS profile Founded in 1972, KWS Manufacturing Company, Ltd, is the leader in the design and manufacture of conveying equipment for the bulk material
More informationLeveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
More informationBUY A COMPLETE MOLD CLAMP ASSEMBLY OR INDIVIDUAL PARTS
Machined Mold s FEATURES: Our complete line of mold clamps are available in an extensive range of sizes. s are available in open-toe and closed-toe styles, as well as heavy duty and extra heavy duty versions.
More informationHD38, HD58, HD78 REV
HD38, HD58, HD78 REV. 07.29.2014 COVER for HD38, HD58, HD78 5 P004868 1/4-20x3/4 Button Head Cap Screw Stainless Steel 2 6 P001450 Lockwasher - Internal Tooth.250 6 8 P005200 Wave Disc Washer 4 10 P004869
More informationSECTION COMMON WORK RESULTS FOR HVAC
SECTION 23 05 00 COMMON WORK RESULTS FOR HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ball Valve. 2. Hangers and Supports. 3. Identification Tags and Sleeves. 1.2 INCLUDED SECTIONS A. Section
More informationMcKissick 380 Series Easy Reeve Crane Blocks
McKissick 380 Series Easy Reeve Crane Blocks Standard block configurations can be from a single sheave design to a five sheave design. Available from 5 to 80 metric tons. Larger models and configurations
More informationMEFA mounting accessories
MEFA mounting accessories Mounting accessories Base plates Page 5/2 Double holder Page 5/4 Height-adjustable suspensions Page 5/5 Pendular bolt joints Page 5/6 Trapeze hanger Page 5/7 Threaded hooks, distance
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
MULTIPURPOSE CLAMPS - USA SERIES 7: Lightweight and 4% stronger than C clamps. Floating jaws that always stay parallel. Designed to eliminate distorting or twisting action. Cantilever action provides 4:
More informationMainz Product Catalogue
2018 Mainz Product Catalogue Stainless steel wire, fittings, hardware and tools for wire balustrades Stainless steel wire Stainless steel hardware and fittings Tools Mainz Pty Ltd Ph: (08) 92756246 www.wirebalustrades.com.au
More informationset of safety brace steel cable draw-up gate kpl
0324101 7108020 8208100 Order-nr. Description Number 0324101 safety brace steel cable draw-up gate 2 7108020 hexagon-head tap bolt M8x20 galv. 2 8208100 hexagon nut M8 galv. 2 set of safety brace steel
More informationSection COUPLINGS AND COUPLING ADAPTERS. This Section covers couplings and coupling adapters for ductile iron and steel pipe.
PART 1 GENERAL 1.01 SUMMARY Section 15155 This Section covers couplings and coupling adapters for ductile iron and steel pipe. 1.02 MEASUREMENT AND PAYMENT A. No separate payment for Work performed under
More informationTransmission Line Support Systems
Antenna Support Bracket for transmission line The Antenna Support Bracket angle mounts directly to a 4-1/2" (114 mm) OD antenna pipe mount or tower leg. This is ideal for supporting transmission line runs
More informationLaser Safety Curtains Page 1 of 5
Laser Safety Curtains Page 1 of 5 Overview For any laser curtain intallation and or hardware questions please do not hesitate to contact Laservision USA at 1-800-393-5565 or chat with our Certified Laser
More informationAPPENDIX FENCE GENERAL NOTES
APPENDIX FENCE GENERAL NOTES 1. Fabric: 9 gage, 2" mesh, knuckle top and bottom, placed on the outside of posts, single fabric width for the entire height. 2. All fencing to be standard galvanized finish.
More informationTel / (USA & CANADA) /
Tel.58.847 / 8.388.459 (USA & CANADA) / Email sales@msdiscounttool.com MULTIPURPOSE CLAMPS - USA SERIES 7: Lightweight and 4% stronger than C clamps. Floating jaws that always stay parallel. Designed to
More informationInstallation Instructions TMW Antenna Tower Mount for 4ft (1.2m) Antennas.
Description The following pages show the steps required to assembly and fit the antenna mount to a vertical tower pipe of diameter 48 to 115 mm (1.9 to 4.5"). This mount provides ±20 azimuth or ±15 elevation
More informationScaffolding ACCESSORIES
Scaffolding ACCESSORIES INITIA COMPONENTS FIXED BASE For flat surfaces. With holes in the spigot for attaching the cradle head. The reinforced base plate has a thickness of 5 mm and a surface area of 120
More informationNUMBER 1 Di-Acro Hand Notcher
OPERATOR S MANUAL & INSTRUCTIONS NUMBER Di-Acro Hand Notcher Di-Acro, Incorporated PO Box 9700 Canton, Ohio 7 373 Progress Street N.E. Canton, Ohio 705 330-55-9 330-55-00 (fax) Revised 0/0 Sale or distribution
More informationCOMPONENTS AND ACCESSORIES FOR FITTING TIPPERS
Hinges for aluminium side boards M 15020 Raw light perforated support M 15010 Zinc-plated light double opening hinge X 40070 Zinc-plated head cap screw 8x20 M 15030 Light raw locking plate M 15620 Zinc-plated
More informationAUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
More informationMOTORIZED STANDARD SHADE WITH CABLES Installation Instructions
Tools Needed Drill Measuring Tape Pencil 2 Level Plumb Line ¼ Masonry Drill Bit Hammer Linesmans Pliers Cable Cutters Phillips & Flat-Head Screw Driver 11/32 Socket or Open End Wrench 5/32 Allen Wrench
More informationSTEP 1 STEP 2 LEVELER KIT OPTION MOBILE CASTER KIT OPTION
B SERIES INDUSTRIAL BENCHES TOOLS REQUIRED FOR ASSEMBLY Socket set, Open end wrench set, Cordless drill with 3/8" socket bit (Magnetic recommended). BEFORE ASSEMBLY Read through the assembly instructions
More information42in Bagger 2011 and After TimeCutter 4000 Series Riding Mower
Form No. 3367-348 Rev A 42in Bagger 2011 and After TimeCutter 4000 Series Riding Mower Model No. 79334 Serial No. 311000001 and Up Register at www.toro.com. Original Instructions (EN) Ordering Replacement
More informationA-SL-1 A-SL-1 HAND RAIL STAIRS STRUCTURE/ ARCH SLIDE FOUNDATION 12" ROUND PIER 20" SQUARE PIER CAP DRILL AND EPOXY BOLTS *SEE FOUNDATION DETAILS
2X2 SQUARE TUBING /" WALL ON STRUCTURAL FRAME /8" WALL RAFTERS & INFILL NO. ISSUE HOUSE # GALVANIZED STEEL STAIRS SLIDE 2 GA SS POLISHED FINSHED LASER CUT FOUNDATION 2" ROUND PIER 20" SQUARE PIER CAP DRILL
More informationPORTABLE UNITS BASKETBALL SCHELDE SUPER SAM MULTI-ADJUST
PORTABLE UNITS SCHELDE SUPER SAM MULTI-ADJUST Highest class unit with regulated projection (within range of 245-325 cm) equipped with SAM (Spring Assisted Mechanism) - unique solution which avails to set
More information2009 MODEL ASSEMBLY, INSTALLATION AND MAINTENANCE INSTRUCTIONS
2009 MODEL ASSEMBLY, INSTALLATION AND MAINTENANCE INSTRUCTIONS It is important that these instructions are adhered to in their entirety. Please read the instructions fully before starting installation
More informationTHREADING MACHINES & REPLACEMENT PARTS PRODUCTION PIPE FABRICATION EQUIPMENT PORTABLE ROLL GROOVERS PIPE STANDS
www.edcos.com THREADING MACHINES & REPLACEMENT PARTS RIDGID THREADING MACHINES RIDGID DIES REPLACEMENT PARTS FOR RIDGID 300 ROTHENBERGER PIPE FABRICATION EQUIPMENT REPLACEMENT PARTS FOR RIDGID 700 DIES
More informationHex Head Bolt Set N - Includes lock nut. Used to connect male and female T connectors. Galvanized. 3/4" x 3-1/2". Standard Grade (f) Part #24279
a Standard Grade (3/16 ) and Commercial Grade(1/4 ) Tie Down Is designed for use with 1-1/2" thick lumber (minimum width 6"). All hardware is mounted with 3/8" carriage bolts. All male and female dock
More informationInstallation Instructions
Installation Instructions For Models: Model Number / Description File Name 1540 Classic Series P-Lam Toilet Partitions 1540.pdf 1 INSTALLATION INSTRUCTIONS LAMINATED PLASTIC TOILET PARTITIONS 1540 Classic
More informationA = 4-1/2 B = 1/4 C = 5/16. Pin Dia. Use with C-11, C-12, C-13, C-19 Use with C-10, C-12, C-13, C dia. A = 4-1/3 A = /16 1-5/8
B C-10 Dia. Pin C-11 Dia. Pin C-12 Dia. Pin Bi-fold Pins & Associated Parts A A = 4- B = C = A = 4-1/6 B = C = A = 4- B = C = C Pin Dia. C-11, C-12, C-13, C-19 C-10, C-12, C-13, C-16 C-13 Dia. Cap C-16
More informationThe DeltaGrip System. Safety and Operating Instructions. Trigger. Air Supply Connection. Handle Assembly. Air Line Assembly.
The DeltaGrip System Safety and Operating Instructions Trigger Air Supply Connection Handle Assembly Air Line Assembly Punch Die Pneumatic Diaphragm Assembly Shackle, Pin & Jam Nut Jaw Frame Shoulder Screw
More informationVPN: ISBXLR. Copyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax
VPN: ISBXLR Copyright 2003. Black Box Corporation. All rights reserved. 1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746 JULY 2003 RM649-R2 RM657 RM664 RM861 RM650 RM658-R2 RM665-R2
More informationPART MATERIALS. Section Fencing Materials. Description
PART 03000 - MATERIALS Section 03010 - Fencing Materials Description 03010.00 Scope - This section consists of the test requirements, specifications and tolerances for barbed wire, woven wire and chain
More informationNo. 412, 414, 416 Operations Manual
No. 412, 414, 416 Operations Manual CARE: Occasional oiling of moving parts with machine oil will ease operation and extend the life of the brake. Occasionally check and tighten the lower beam bracket
More informationW & A PARTS MANUAL STACKER BUSTER LEVEL BANDER. Model No Quality Products from W & A MANUFACTURING COMPANY
W & A PARTS MANUAL 12 ROW @ 38 STACKER BUSTER LEVEL BANDER Model No. 3668 SPECIALIZED FARM EQUIPMENT Quality Products from W & A MANUFACTURING COMPANY P.O. Box 5238, Pine Bluff, Arkansas 71611 Phone: (870)
More informationVersatile Solutions from POWER-STRUT
POWER-STRUT Quick Reference Guide Versatile Solutions from POWER-STRUT Step 1 Step 2 Channels, Fittings, & Accessories Electrical Raceway Components Concrete Inserts Brackets & Clamps Available Finish
More informationHPH Series J-Hook Installation Instructions
HPH Series J- Installation Instructions 1 Mounting to a vertical surface: HPH16, HPH32, HPH48 and HPH64 Use a nail*, bolt* or screw* with a minimum head diameter of 0.329 (1-A) and an appropriate length
More informationFENCING PRODUCTS FENCING PRODUCTS. Please call:
YardGard brand of quality Chain Link borders and fencing meet the needs of residential property owners, industry and municipalities. Manufactured and distributed by Midwest Air Technologies, Inc,. F or
More informationPowerLock. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 1944 FOR Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com Indianapolis,
More informationM2 Antenna Systems, Inc. Model No: 20M5LD
M2 Antenna Systems, Inc. Model No: 20M5LD SPECIFICATIONS: Model... 20M5LD Frequency Range... 14.0 14.350 MHz *Gain (Full Band)... 10.2 dbi Typical Front to back... 23 db Typical Beamwidth... E=50 / H=66
More informationEspecially suitable for work in restricted working spaces.
Innovative ratchet pipe cutter with a worldwide patent and ratchet mechanism allows you to cut a pipe without having o completely rotate the tool. Especially suitable for work in restricted working spaces.
More informationtable of contents Sliding Door Accessories Page Latches & Snuggers Stay Rollers Brackets & Stops
table of contents Square Track & Accessories Pages 4-7 Square Track Options Page 4 Light Duty Track Page 4 Square Track Brackets Page 5 Square Track Accessories Page 5 Square Track Trolleys Page 6-7 Offset
More informationInstallation Instructions
Column & Beam Units with Debris Netting Installation Instructions Laminated Wood Systems, Inc. Seward, Nebraska 800-949-3526 2015 LWS, INC. AVR-NET INSTALL 05-12-16 AVR Installation Notes 1 Safety The
More informationPC-196 B-3-A 7-1/2 NYCOPAC BRAKE ASSEMBLIES PARTS CATALOG. Publication 501-TAB 8
B-3-A 7-1/2 NYCOPAC BRAKE ASSEMBLIES PARTS CATALOG Publication 501-TAB 8 Revision A November 1, 1991 APPROX. COMPLETE HANDBRAKE NET WT PART NO. TON WHEEL WHEEL ASSEMBLY LBS (CAR SET) CAR BASE DIA. PART
More informationred rooster REV. TCR500 / TCR 1000 Link Plate 2TE Air Trolley (2TE/AT/4) DESCRIPTION Air Hoist PART NUMBER DRG TCR 1000 DRG
ITEM QTY PART NUMBER DRG 5- TCR DRG 5- DESCRIPTION TE Air Trolley (TE/AT/) Air TCR5 / TCR Link Plate TE and Trolley 6/6/ - 6kg Title of project Material Weight REV. Designed by Checked by Approved by B.
More informationParts list Instruction guide Warnings Please read carefully before assembling and using product.
Parts list Instruction guide Warnings Please read carefully before assembling and using product. Jet Rail XL Part Number 27377 Tools required for assembly Hammer 9/16 Wrench 3/4 Wrench Ratchet 9/16 Socket
More informationPENNING FEATURES PENNING-1 SEPT/2014
PENNING PENNING-1 FEATURES Panels available in all sizes suitable for loose housing, finishing, nursery, etc. Flexible system can be easily combined with plastic panelling. Shows animals well and allows
More informationTuf-Lite III Fans 3000K Series Hub
Tuf-Lite III Fans 3000K Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 11 thru 15 Diameter Hudson Tuf-Lite III fan blades Hudson Tuf-Lite III fan blades are of single piece fiberglass reinforced
More informationEASY CHOICE STALL FEATURES
EASY CHOICE STALL STALLS-1 Protection for loose-housed sows. The Easy-Choice sow stall gives a gestating sow protection while she s feeding in a loose sow-housing environment. The stall is simple and strong,
More informationHang-TITE Rod Hanger Screws
Description The Hang-TITE Rod Hanger Screw is a one-piece, internally threaded anchor designed for suspending threaded rod for applications like cable-tray, pipe hanging, fire protection, and electrical
More information