Japanese Quartet. With. Nikolina Otržan

Size: px
Start display at page:

Download "Japanese Quartet. With. Nikolina Otržan"

Transcription

1 Japanese Quartet With Nikolina Otržan

2 List of tools and materials for this class: - Clean & Flat Surface - Pasta Machine - Round Kemper Cutters - A Rigid Blade - A Ruler - A Pen - A Needle Tool - Coarse Nail File/ Coarse Sanding Paper ( Grit) - Stiff Brush - A Pair Of Scissors - A Saucer - Aprox. 4 Oz Of White Clay (Solid) - Liquid Polymer Clay - Black Acrylic Paint - Promarkers (Black, Duck Egg & Lilac) - White And Black Oil Paint - Old Business Card - Photocopy Paper - Baby Wipes - Paper Towel - Couple Of Toothpicks - Varnish Of Your Choice (I m Using Glossy Accents & Pym Ii) - Double-Side Sticky Tape - Pair Of Disposable Gloves (Optional)

3 1 st pattern Condition a pack of clay. Roll out a sheet of some 4x4. Thickness should be the second thickest on your pasta machine. Since I m using Atlas, that s number two. Get your round Kemper cutters out. Surface for this pattern could be anything you normally work on. I ve chosen the 3 rd smallest Kemper cutter here. I ll start from the edge, pressing cutter into the clay, but I ll be careful not to cut it thru. Circles should be positioned one next to each other, without any space between them.

4 And I ll continue until I have the whole sheet covered. And now I can start making circles across the edges of four neighboring ones. They should also be next to each other, same as the first bunch. And the sheet is finished! I ll use a blade to slowly peel it off from my work surface.

5 2 nd pattern For this pattern we will need: 1. Kemper cutters number 1, 2, and 4 2. An old business card or a piece of paper of similar strength 3. A pair of scissors 4. An ink pad and 5. A sheet of white clay rolled out thru the second thickest setting, aprox. an oz For this pattern, we need to make a template. So, first we ll get some ink on our cutter, on the largest one we ve chosen and we ll stamp a circle on a business card. And we shall also stamp another two, to make our pattern. After we ve done stamping, we ll wipe the cutter clean with baby wipes.

6 Then we shall use that very same cutter to cut out some circles from that white sheet we ve prepared. We ll cut out as many circles we can out of that sheet and as we cut them out, we ll turn them upside down to avoid having that cutter mark on its face. So here you can see that I m really trying to use the whole sheet, leaving no room between cutouts.

7 And now we ll mark all our cutouts with one smaller cutter and then with the smallest one. And now it s the time for our template! Grab a pair of scissors and cut it out. Always pick up your circles with a blade, otherwise you ll distort them.

8 So, place a template on top of a circle and.use your cutter, the largest one, to cut the excess. Now you ll roll out a thin sheet of clay, the thinnest possible you can handle and you ll be putting your cutout circles on top of it.

9 Important thing here is to remember that you should pick up and handle your circles using a needle tool like I m doing here And if there s a something to correct or smooth, use the other end of your needle tool or something similar in a way I m doing it here. Once you re finished, trim the edges and again, peel it from the surface and pick it up with your blade.

10 3 rd pattern For our third pattern we will need: - A sheet of white, rolled thru the second thickest setting - Kemper cutter of your choosing - An ink pad - An old business card - A pair of scissors As you can see, I ve already stamped a circle and two additional ones for my template. Now we ll cut the template out. Like I did it here. And now we ll be cutting the circles out with our cutter, identical as with previous pattern. As you cut them, turn them to the other side.

11 And once we ve done that, we ll place the template on top of each and cut the excess from the sides. Using a needle tool, we ll carefully place them next to each other, alternating the sides on the top of a thin sheet of clay. Exactly the same as with our previous pattern. Important thing here is to have a flow between pieces.

12 Again, if there is something to correct/smooth, do it with the end of your needle tool, don t touch it with your fingers. And when you re done, take a sheet of paper and lightly burnish it. And now all I need to do is to size it down.

13 4 th pattern For our last pattern we shall need: - Approx. an oz of white clay - A cutter of your choice here I prefer a smaller one (the second smallest for example) - A length of an old business card - A ruler and - A pen First you need to measure your cutter and mark it on a business card along its length. Size here is some 8 mm ( ). Now you can put that ruler away.

14 Position that marked business card along the length of clay and imprint every other half circle. You have to do it slowly and carefully because you really do need those marks to be as identical as possible. You don t want to have one half circle, then one quarter of a circle. Put your card behind the cutter when you re marking your first circle and keep it there until you finish the whole row, so all of your markings are the same. It s your decision how wide your strips will be. Now do the same at the other end.

15 Use your blade to carefully lift it up and put aside. Start another strip. After you ve done the second one you can see how you re doing and if you re doing it properly. Those half circles from one strip should touch the edges of half circles from the other one. So keep adding new ones until you have the sheet in size that you need.

16 Add thin sheets of clay to the lower two tiles and bake all 4, according your clay manufacturer's instruction for 30 minutes. If you're concerned about them turning yellow during baking, you can put small paper tents over them. Once the tiles are baked and cool, we ll take a nail file or some coarse sand paper and we ll carefully sand the surface of those tiles. And now we shall prepare: - Black acrylic paint - A brush (stiff rather than soft) - Paper towel - Baby wipes - Nail file

17 We ll put some acrylic paint right on the tile and use the brush to push the paint into those crevices. When we are sure we ve applied paint all over properly, we ll use brush to take the excess off and a paper towel to wipe the rest. Once the paint dries, we ll take again that nail file and using circular motions, lightly sand away that black coat.

18 Like I did it here. And in the end, we ll wipe them clean using baby wipes. Now leave them for some half an hour to dry before you start coloring. As you can see, I ve decided on two Promarkers: blue duck egg color and lilac. And I left some bits white where I ll apply the mix of liquid polymer and oil paint.

19 To mix those two mediums in/on, you can use whatever is really handy. And you ll need a toothpick! First we ll pour some of that liquid clay And then we ll add a bit of color.

20 Once I m happy with the mixture, I m starting to apply the color. When I m done with white, I will add a touch of that dolphin grey. We ll apply the grey mix and bake the tiles for 35 minutes.

21 If you used just Promarkers, you can finish the tile off with PYM II. If you were making just faux enamel, use Glossy accents. If you re mixing them, use both finishes, as explained in the class. Or use your own varnish, but make sure it s compatible with this type of faux enamel. Thank you for taking this class!

22

23

stars nikolina otržan with Stars with Nikolina Otržan A CraftArtEdu Class Web: Customer Service:

stars nikolina otržan with Stars with Nikolina Otržan A CraftArtEdu Class Web:  Customer Service: stars with nikolina otržan TOOLS & MATERIALS: pasta machine acrylic roller stiff blade craft knife/scalpel needle tool shape cutter or a template coarse sandpaper or a texture hand drill curved base for

More information

doodle me - do nikolina otržan Doodle me - do with Nikolina Otržan A CraftArtEdu Class Web: Customer Service:

doodle me - do nikolina otržan Doodle me - do with Nikolina Otržan A CraftArtEdu Class Web:  Customer Service: Doodle me - do with Nikolina Otržan doodle me - do by nikolina otržan TOOLS & MATERIALS: flat clean surface (glass would be ideal) pasta machine acrylic roller rigid blade ruler photocopy & parchment paper

More information

Colori. Part I Geometry

Colori. Part I Geometry Colori Part I Geometry 1 2 Determine the size of your cane. TOOLS & MATERIALS FOR BUILDING A CANE: - photocopy paper - ruler - pen or a black marker - color markers (optional) - pasta machine - clay of

More information

pen doodle MODERN TIMES pendant

pen doodle MODERN TIMES pendant pen doodle MODERN TIMES pendant with NIKOLINA OTRŽAN TOOLS & MATERIALS LIST: 1. Flat clean surface 2. Pasta machine 3. Stiff blade 4. Lightbulb (any, mine is 2.5") 5. Round cutter aprox. the same size

More information

ANY DREAM WILL DO. Nikolina Otržan 2015

ANY DREAM WILL DO. Nikolina Otržan 2015 ANY DREAM WILL DO Nikolina Otržan 2015 LIST OF tools: pasta machine blade roller shape template akto knife texturing sponge (clay-yo middle one or similar) curved baking base rubber stamps small brush

More information

polymer clay. by Jill Erickson

polymer clay. by Jill Erickson intermediate polymer clay You ought to be in pictures... Transfer your favorite photographs to jewelry using polymer clay. by Jill Erickson This direct image-transfer technique is easy to master and does

More information

Hollow metal clay forms are typically built over organic cores like. Coreless Construction: Rethinking the Metal Clay

Hollow metal clay forms are typically built over organic cores like. Coreless Construction: Rethinking the Metal Clay PROJECT INTERMEDIATE METAL CLAY Coreless Construction: Rethinking the Metal Clay Build this four-sided pendant using forethought and a 3-D template. by Cindy Ambrose FCT-MWON0216_ART17 Hollow metal clay

More information

DIY DISNEY CHAR M BR ACELET

DIY DISNEY CHAR M BR ACELET DIY CHAR M BR ACELET YOU WILL NEED: Polymer clay in various colors 5/32 Silver/Gold eyelets Sculpting tools Clay gloss varnish or polyurethane matte varnish* Paint brush Craft knife An oven and pan A ruler

More information

Building the Gothic Church

Building the Gothic Church Building the Gothic Church Mold #54 does not contain all of the blocks to build this church. You will need extra regular blocks (1/2" x 1/2" x 1") and square blocks (1/2" x 1/2" x 1/2"). These blocks can

More information

Introduction 6 Basics 7 Materials 7 Tools 8 Safety 9 Color 10 Workspace 11

Introduction 6 Basics 7 Materials 7 Tools 8 Safety 9 Color 10 Workspace 11 Contents Kalmbach Books 21027 Crossroads Circle Waukesha, Wisconsin 53186 www.kalmbach.com/books 2012 Lori Wilkes All rights reserved. Except for brief excerpts for review, this book may not be reproduced

More information

Building the Wizards Tower

Building the Wizards Tower Building the Wizards Tower Building Instructions You will need to fill this mold 18 times to have enough blocks to build the tower. Also, the blocks should be completely dry before gluing them together.

More information

Openwork. Pendant. Bezel-Set Cabochon. with Free Form. open spaces and a bezel-set stone. Frame a dimensional design accented with.

Openwork. Pendant. Bezel-Set Cabochon. with Free Form. open spaces and a bezel-set stone. Frame a dimensional design accented with. ADVANCED Openwork Pendant with Free Form Bezel-Set Cabochon FCT-CRON0316_ART105 Frame a dimensional design accented with open spaces and a bezel-set stone. by Deb Fitz To create the focal point of my pendant,

More information

4 th of July USA flag Millefiori Cane

4 th of July USA flag Millefiori Cane 4 th of July USA flag Millefiori Cane by Iris Mishly Photos Iris Mishly For all you who wants to make a nice cane for the american independence day (or just for fun) a USA flag! Materials: Working space,

More information

Personalize. Metal Clay and Resin. Making your own molds is one way to. Make your own texture molds, use your own photo.

Personalize. Metal Clay and Resin. Making your own molds is one way to. Make your own texture molds, use your own photo. intermediate metal clay/resin Personalize CAPTURE A MOMENT Metal Clay and Resin Make your own texture molds, use your own photo. by Elaine D. Luther FCT-CR-050718-02 Making your own molds is one way to

More information

Bang! Zoom! Off to the Moon!

Bang! Zoom! Off to the Moon! Bang! Zoom! Off to the Moon! by Christi Friesen Get ready for a blast from the past when you create this steampunk rocket ship pendant from polymer clay. In the late 1800 s people s imaginations were fired

More information

Enchanting Venus table decorations

Enchanting Venus table decorations Enchanting Venus table decorations Use your favourite pictures to create your very own impressive deco items. From classic masterpiece to family photo you can transform them all into unique objects using

More information

Cardboard Model Buildings

Cardboard Model Buildings Cardboard Model Buildings Get more model kits from http://www.modelbuildings.org PRINTING & ASSEMBLY TIPS: These OO designs can easily be resized by reducing the print percentage as follows: OO scale is

More information

Illustrated Art Lessons

Illustrated Art Lessons African Art Making Papier Mâché Masks Materials: papier-mâché paste 8" balloons corrugated cardboard squares brown paper towels scissors glue bucket bowls newspaper Note: Several hours before beginning

More information

Tape Measure Metal Clippers Screw Bit Set With Extensions

Tape Measure Metal Clippers Screw Bit Set With Extensions IMPORTANT: Read through instructions thoroughly before beginning to replace any damaged material. Minor damage can be fixed with a fiberglass repair kit and color matched paint. Tools Required Tape Measure

More information

Building the Circular Tower

Building the Circular Tower Building the Circular Tower You will need to fill this mold 18 times to have enough blocks to build the circular tower. Be sure the blocks are completely dry before gluing them together. For detailed instructions

More information

Freehand Back-Filling: Polymer Clay and Resin Tutorial

Freehand Back-Filling: Polymer Clay and Resin Tutorial Page 1 of 9 Eugena Topina, 2016 Freehand Back-Filling: Polymer Clay and Resin Tutorial This tutorial is offered for your personal use only. Please do not distribute. Back-filling is a simple and very versatile

More information

HP Create. HP Create: Polymer Clay Photo Pendant

HP Create. HP Create: Polymer Clay Photo Pendant : Polymer Clay Photo Pendant I love custom handmade gifts, especially if they include a photo. My little Polymer Clay Photo Pendants are perfect gifts to share to spread the love! You can make them into

More information

How to Make Faux Porcelain Pendants with Transfer Sheets & Gel Du Soleil

How to Make Faux Porcelain Pendants with Transfer Sheets & Gel Du Soleil How to Make Faux Porcelain Pendants with Transfer Sheets & Gel Du Soleil We look forward to bringing you exclusive innovations and distinctive products this year and beyond. www.nunndesign.com www.nunndesign.com

More information

Coat Rack. Materials: Directions:

Coat Rack. Materials: Directions: Coat Rack 2x2 wooden poplar (foundation of the rack) 3/4 inch diameter wood dowels (5-8 depending on how many arms you want) 1/4 inch dowel screw 1/4 inch drill bit Power drill Ruler Pencil Paint/spray

More information

MAKE YOUR OWN GLUE. DESIGN CHALLENGE Make and test your own homemade glue. For each team or each glue-making station:

MAKE YOUR OWN GLUE. DESIGN CHALLENGE Make and test your own homemade glue. For each team or each glue-making station: Grades 3 5, 6 8 20 60 minutes MAKE YOUR OWN GLUE DESIGN CHALLENGE Make and test your own homemade glue. SUPPLIES AND EQUIPMENT For each team or each glue-making station: Liquid measuring cup (1 cup size)

More information

Nanton Grain Mill Assembly

Nanton Grain Mill Assembly ( 1 ) Nanton Grain Mill Assembly Locate package for assembling storage building. These are cut from 1/8 masonite. Inspect and lightly sand edges where it will be bonded. Use white glue or CA glue to bond.

More information

DIY Shaving Cream. Ingredients:

DIY Shaving Cream. Ingredients: DIY Shaving Cream Ingredients: 1/3 cup coconut oil (solid, not fractioned) 1/3 cup shea butter ¼ cup sweet almond oil 4-6 drop tobacco bay leaf fragrance oil Plastic bale jar Tools: Microwave-safe bowl

More information

Metal clay. Skill Set. Whether you want to learn how to bezel-set a cabochon, Step Up Your. earring project.

Metal clay. Skill Set. Whether you want to learn how to bezel-set a cabochon, Step Up Your. earring project. PROJECT INTERMEDIATE METAL CLAY Step Up Your Metal clay Skill Set Improve your craft à la carte in this technique-packed earring project. by Deb Fitz FCT-CRON0216_ART48 Whether you want to learn how to

More information

Football Silhouettes Project Sheet 1 of 2: Classic Beads

Football Silhouettes Project Sheet 1 of 2: Classic Beads Project Sheet 1 of 2: Classic Beads This project as shown at left has 4 designs 2 in classic beads and 2 in mini beads. They are intended to be displayed together; however, you may choose to make only

More information

DIY CROWN MARACAS DISNEY

DIY CROWN MARACAS DISNEY DIY CROWN MARACAS YOU WILL NEED: For the crowns: 3 clean tea tins (or hot cocoa tin, seasoning containers, etc. Anything cylindrical with a lid) Gold glitter paper or vinyl Various jewels & gems Filling:

More information

Golden angels in an elegant design

Golden angels in an elegant design Golden angels in an elegant design The magic of advent these modern-looking, golden-gowned angels are simply perfect for giving your home a festive Christmas feel. Made using the clay-like FIMOair basic

More information

Take a Crash Course in Metal Clay with this. Appliquéd. Bisque-bead. Pendant. Discover how to use four types of metal clay paper, paste,

Take a Crash Course in Metal Clay with this. Appliquéd. Bisque-bead. Pendant. Discover how to use four types of metal clay paper, paste, PROJECT INTERMEDIATE METAL CLAY Take a Crash Course in Metal Clay with this Appliquéd Bisque-bead Pendant Discover how to use four types of metal clay paper, paste, syringe, and lump to create a detailed

More information

shine to by Jana Roberts Benzon

shine to by Jana Roberts Benzon intermediate/ advanced polymer clay Taking a shine to polymer clay Give polymer clay a glossy surface with sandpaper and a quick buffing. FCT-CRON0216_ART30 The featured pendant s intricate cane pattern

More information

Applications Engineering Notes

Applications Engineering Notes Applications Engineering Notes Document Title Document Number Operating Instructions for the US Conec AEN-1408 Revision Number 1.0 Effective Date December 15, 2011 THE USE OF SAFETY GLASSES FOR EYE PROTECTION

More information

THE DIPPING TECHNIQUE

THE DIPPING TECHNIQUE THE DIPPING TECHNIQUE An Alternative Finishing Technique By B. L. Herm Ely INTRODUCTION: A good finish should excite the senses. When touched with the finger tips, the finish should feel silky smooth.

More information

Mustang Eleanor Style Louvers - Pre-painted (05-10) - Installation Instructions

Mustang Eleanor Style Louvers - Pre-painted (05-10) - Installation Instructions Mustang Eleanor Style Louvers - Pre-painted (05-10) - Installation Instructions The below installation instructions work for the following products: Mustang Eleanor Style Louvers - Pre-painted (05-10)

More information

HICKORY HOMESTEAD. by Debby Forshey-Choma

HICKORY HOMESTEAD. by Debby Forshey-Choma HICKORY HOMESTEAD by Debby Forshey-Choma EXCLUSIVE Hickory Homestead by Debby Forshey-Choma PALETTE DecoArt Americana Acrylics Avocado #13052 Black Green #13157 Black Plum #13172 Bleached Sand #13251 Charcoal

More information

Tips & Tricks using Part 24

Tips & Tricks using Part 24 Tips & Tricks using Part 24 Finishing the River Sections... 2 Making Tentacles... 4 Making Fish... 6 Adding the Water... 8 Making the Plank Bridge... 13 Making Crystal Piles... 15 Finishing Various Accessories...

More information

Installation Guide. Pionite Decorative Surfaces One Pionite Road, Auburn, Maine PIONITE ( )

Installation Guide. Pionite Decorative Surfaces One Pionite Road, Auburn, Maine PIONITE ( ) Installation Guide A Subsidiary of Panolam Surface Systems SMPBRO00-012 6/14 Pionite decorative laminates are designed for finished interior surfaces which require high impact, wear and stain resistance

More information

A Precision 2000 Mixed Media Project

A Precision 2000 Mixed Media Project Día de los Muertos (Day of the Dead) Panel A Precision 2000 Mixed Media Project PROJECT TITLE: Día de los Muertos (Day of the Dead) Panel DESIGNED BY: Andy Spencer SKILL LEVEL: (Adult 1-5: 1 being the

More information

WINTER WATCH. by Debby Forshey-Choma

WINTER WATCH. by Debby Forshey-Choma WINTER WATCH by Debby Forshey-Choma EXCLUSIVE Winter Watch by Debby Forshey-Choma PALETTE DecoArt Americana Acrylics Grape Juice #13236 Graphite #13161 Lamp Black #13067 Purple Pizzazz #13543 Slate Grey

More information

C Paint. Product Information Sheets

C Paint. Product Information Sheets T A T G O E C Paint Product Information Sheets Cottage Paint- 8oz jar Available in many pre-tinted colors -see chart. Used for painting furniture and cabinetry. Water based Clay paint that is easily distressed

More information

Basic Stenciling Techniques

Basic Stenciling Techniques Metal Stencil Techniques For each technique you ll need the equipment listed in addition to your stencil and removable tape. To avoid bending your stainless steel stencils, keep them flat at all times.

More information

Fee Fi Faux Fabulous

Fee Fi Faux Fabulous Fee Fi Faux Fabulous Mimicking enamel and metal with polymer and mixed media A floral focal pendant project with Christi Friesen For this project you will need:. polymer clay I recommend Premo for this

More information

JOY, PEACE AND HOPE. by Debby Forshey-Choma

JOY, PEACE AND HOPE. by Debby Forshey-Choma JOY, PEACE AND HOPE by Debby Forshey-Choma EXCLUSIVE Joy, Peace And Hope by Debby Forshey-Choma PALETTE DecoArt Americana Acrylics Antique Maroon #13160 Black Green #13157 Cadmium Red #13015 Grey Sky #13111

More information

How to make climbing grips. By,

How to make climbing grips. By, How to make climbing grips By, Items needed: * Items may be needed depending on your preference. - Carving Foam - Level Table - Cardboard - Pen - Ruler - Straight Edge - Box cutter - Hot melt glue gun

More information

Great Escape- Upcycle Cereal Boxes Sue Kohlman September 27, 2015

Great Escape- Upcycle Cereal Boxes Sue Kohlman September 27, 2015 Great Escape- Upcycle Cereal Boxes Sue Kohlman September 27, 2015 Drawer Organizers http://iheartorganizing.blogspot.com/2013/01/diy-cereal-box-drawerdividers.html Materials Pretty papers, {both wrapping

More information

*** If you'd like additional info on the quirky way I make my blends, you can take a peak at the three FREE blend classes I have on CraftArtEdu

*** If you'd like additional info on the quirky way I make my blends, you can take a peak at the three FREE blend classes I have on CraftArtEdu Peacock Feather Polymer Clay Canes with Cathy Harm a CraftArtEdu class Web: www.craftartedu.com Customer Service: info@craftartedu.com Peacock Feather Polymer Clay Canes with Cathy Harm -This handout is

More information

Mr. & Mrs. H. Dumpty

Mr. & Mrs. H. Dumpty Mr. & Mrs. H. Dumpty 2004 Robyn R. Warne All Rights Reserved. Page 1 of 6 Mr. & Mrs. H. Dumpty List of supplies 2 - unfinished wood eggs 2 - unfinished wood egg cups gesso JW etc. Right Step Sealer sandpaper

More information

Mirrorcraft Project Especially for Dogs

Mirrorcraft Project Especially for Dogs Mirrorcraft Project Especially for Dogs DIY Customized Pet Mirror Make a mirror photo frame to Display your Pets Photo Irene Jacobs April 2007 Mirrorcraft is a fun craft to easily create you own customized

More information

Art Play Date 2014 Multimedia Poinsettia 2014 by Sandi Strecker

Art Play Date 2014 Multimedia Poinsettia 2014 by Sandi Strecker Multimedia Poinsettia 2014 by Sandi Strecker PALETTE BY DECO ART Soft Sage, Wasabi Green, Soft Blue, Whispering Turquoise, Salem Blue, Spice Pink, Country Red, Deep Burgundy, Bubblegum Pink, Snow White,

More information

Percy Pumpkin Head Light A KraftyBlok project.

Percy Pumpkin Head Light A KraftyBlok project. Percy Pumpkin Head Light A KraftyBlok project. DESIGNED BY: Jeanne Baruth for Diamond Tech SKILL LEVEL: (Adult 1-5: 1 being the easiest, 5 being most difficult) 3 TIME TO COMPLETE: 2 hours not including

More information

Clay Magic Eye Painting Pictorial

Clay Magic Eye Painting Pictorial Clay Magic Eye Painting Pictorial Clay Magic Eye Painting Instructions Eye Painting tips Brush Quality, VERY IMPORTANT!! Use good quality brushes that are in excellent condition. Poor quality brushes or

More information

How To Paint A LadyBug

How To Paint A LadyBug How To Paint A LadyBug Copyright 2013 - TheDonTolman.com How To Paint A LadyBug - Copyright 2013 TheDonTolman.com 1 The simple design and bold colors make this ladybug an ideal Ladybug Stone. Success depends

More information

MIXED-MEDIA LINKS. With three different paisley-shaped links and four ways to embellish. Combine woven wire and polymer clay to make bold links.

MIXED-MEDIA LINKS. With three different paisley-shaped links and four ways to embellish. Combine woven wire and polymer clay to make bold links. Soldered wire frames are the backbone of each link in the bracelet. 8½ x 1¼ in. (21.6 x 3.2cm). WIRE AND POLYMER CLAY BRACELET MIXED-MEDIA LINKS Combine woven wire and polymer clay to make bold links.

More information

MAGNUM BOARD INTERIOR INSTALLATION GUIDELINES

MAGNUM BOARD INTERIOR INSTALLATION GUIDELINES TECHNICAL BULLETIN No.: 090509-1405 Subject: Issue Date: September 4, 2009 Issue No.: II MAGNUM BOARD INTERIOR INSTALLATION GUIDELINES 1. CUTTING MAGNUM BOARD You can easily cut Magnum Board with carbide

More information

Design and Build a Bracelet. a la Carte. by Deborah Francis

Design and Build a Bracelet. a la Carte. by Deborah Francis PROJECT BEGINNER METAL Design and Build a Bracelet a la Carte Use basic cold connections to mix and match found objects, base metals, and polymer components. by Deborah Francis This inexpensive bracelet

More information

Building the Bell Tower

Building the Bell Tower Building the Bell Tower Mold #55 does not contain all of the blocks to build this tower. You will need extra regular blocks (1/2" x 1/2" x 1") and square blocks (1/2" x 1/2" x 1/2"). These blocks can be

More information

SGTalon s Enterprise-A Foamie Build Guide. SGTalon s. Enterprise. Enterprise--A. Assembly Instructions

SGTalon s Enterprise-A Foamie Build Guide. SGTalon s. Enterprise. Enterprise--A. Assembly Instructions SGTalon s Enterprise SGTalon s Enterprise--A Enterprise Assembly Instructions Page 1 4-13-2013 SGTalon s Enterprise *******Recommended Hardware******** 2.6oz 250w Motor and Speed Control with 8x6 prop

More information

Build a Better. hollow-form metal clay beads. Use tools designed for polymer clay to make. intermediate metal clay OPENWORK BEADS

Build a Better. hollow-form metal clay beads. Use tools designed for polymer clay to make. intermediate metal clay OPENWORK BEADS intermediate metal clay OPENWORK BEADS Use tools designed for polymer clay to make hollow-form metal clay beads. Build a Better Hollow The metal clay beads and bead caps are constructed over a bead form

More information

Pop UPS with Ease JUDI WATANABE. Design by: 2006 Craft TV Weekly, Inc.

Pop UPS with Ease JUDI WATANABE. Design by: 2006 Craft TV Weekly, Inc. Pop UPS with Ease Design by: JUDI WATANABE 1 It s poppin fresh! Judi Watanabe from JudiKins pops in to show how to add a fun 3-D element to pages--the pop up! She creates a beautiful layout of a day exploring

More information

Starry Night by Christi Friesen

Starry Night by Christi Friesen Starry Night by Christi Friesen As you may know, glitters and powders are a wonderful way to add additional color, texture and shading to your polymer clay creations. But there are other tricks you can

More information

Tips & Tricks using Part 2

Tips & Tricks using Part 2 Tips & Tricks using Part 2 Using the cobblestone mold #210...1 Making a dungeon diorama...2 Making torches...3 Making a textured door...4 Making a portcullis...5 Adding moss...6 Tips & Tricks using Bruce

More information

COLORED PENCIL WITH MIXED MEDIA with Sarah Becktel

COLORED PENCIL WITH MIXED MEDIA with Sarah Becktel SUPPLY LIST COLORED PENCIL WITH MIXED MEDIA with Sarah Becktel Lesson 1: Introduction to Materials and Techniques Strathmore 500 Series Mixed Media Board or Strathmore 400 Series Mixed Media Paper Artist-grade

More information

Max Launch Abort System Prod. No *Kevlar is a registered trademark of Dupont

Max Launch Abort System Prod. No *Kevlar is a registered trademark of Dupont Flying Model Parts List Max Launch Abort System Prod. No. 3014 A 11820 - Body Tube 3.5 Diam x 5.5" Long B 11824 - Orange Capsule Base Shoulder Ring C 16032 - Laser-cut Ring motor mount rear D 16033 - Laser-cut

More information

1983 Jaguar XJS Interior Wood Trim Repair and Refinishing

1983 Jaguar XJS Interior Wood Trim Repair and Refinishing The following describes and shows one method of wood trim repair/restoration/refinishing for wood trim on Jaguar cars, specifically this 1983 Jaguar XJS, although the wood trim should be the same in all

More information

French Bunnies. Kerryanne English 2012

French Bunnies. Kerryanne English 2012 French Bunnies Kerryanne English 2012 Page2 French Bunnies Kerryanne English 2012 When I designed the bunnies I wanted something that could be used not only for Easter, but at any time of the year for

More information

Building an Unfeathered Paddle with a Wood Shaft and Carbon Fiber Blades

Building an Unfeathered Paddle with a Wood Shaft and Carbon Fiber Blades Building an Unfeathered Paddle with a Wood Shaft and Carbon Fiber Blades by Duane Strosaker Choosing the Wood Two 3/4" pieces of Sitka spruce laminated with epoxy for an unfeathered one-piece paddle. For

More information

The Essential Guide to Embossing.

The Essential Guide to Embossing. The Essential Guide to Embossing How to WOW! This guide will run you through a whole host of Embossing Techniques from the basic Stamp, Sprinkle, Tap, Heat, WOW! to the more complex and beautiful effects

More information

Hostess Rewards Project Instructions Australia New Zealand

Hostess Rewards Project Instructions Australia New Zealand Hostess Rewards Project Instructions Australia New Zealand Level 2 Hostess Rewards Artwork: Hostess Rewards Products Needed: A1195 My Acrylix Lovely Leaves M1150 My Acrylix Little Leaves 1388 Colonial

More information

Jewelry Making Techniques

Jewelry Making Techniques Jewelry Making Techniques ITSY BITSY LEAVES: The itsy bitsy leaves are created by taking a piece of clay about one half the size of a pea and making a small leaf shape. The leaves do not have to be exact.

More information

Pixel Pillow Skill Level: Beginner

Pixel Pillow Skill Level: Beginner Pixel Pillow Skill Level: Beginner Designed By Kati Spencer Sewn By Kati Spencer www.fromthebluechair.com This pillow is the perfect introduction to pixel piecing using very small squares. Sample use Essex

More information

STEP 14 STEP 13. With a #8 to #12 shader, begin at the top of the design background and begin by applying pure black to the top 1/3 of the design.

STEP 14 STEP 13. With a #8 to #12 shader, begin at the top of the design background and begin by applying pure black to the top 1/3 of the design. STEP 13 Cut the frisket along the outside pattern lines of your design. You are freeing the remaining background frisket from the pattern work area. Cut along the outer boundary line of your design; this

More information

Application guidance for Printed Vinyl decals

Application guidance for Printed Vinyl decals Paint Masks - Dry Rub Decals - Waterslides - Printed media Telephone: Website: email: +44(0)7872 181119 (mobile) http://www.flightlinegraphics.com sales@flightlinegraphics.com Application guidance for

More information

Eerie Halloween by Nunn Design

Eerie Halloween by Nunn Design Eerie Halloween by Nunn Design Approximate finished length: 20 inches Beads and other products needed for necklaces: 1 - Pewter Itsy Square Bezel Pendant with Flat Loop by Nunn Design - Antique Gold -

More information

ARLENE LINTON A LACE DOILY ART PLAY DATE 2015

ARLENE LINTON A LACE DOILY ART PLAY DATE 2015 ARLENE LINTON A LACE DOILY ART PLAY DATE 2015 A Lace Doily Palette (FolkArt): Vintage White (515) Brushes: Scharff Series 3000 Kolinsky Sable Round (#4) Surface: 8-inch Scooped Plate (#WPSCO) Available

More information

From My Sketchbook 2009 Janelle Johnson CDA, TDA

From My Sketchbook 2009 Janelle Johnson CDA, TDA From My Sketchbook 2009 Janelle Johnson CDA, TDA Cozy Nest Designs PO Box 219 Rose Hill, KS 67133-0219 janelle@janellejohnson.com * janellejohnson.com * (316) 776-0440 Study of Blue Baby Blue-Eyes 1 Prismacolor

More information

Triangles. Pendulum. Dangling from handmade curvilinear ear wires, Construct earrings from carefully fitted panels. METAL CLAY EARRINGS

Triangles. Pendulum. Dangling from handmade curvilinear ear wires, Construct earrings from carefully fitted panels. METAL CLAY EARRINGS The front of each earring is impressed with a slightly different pattern than those used on the sides and backs. 1¾ in. (44mm). beginner/intermediate metal clay METAL CLAY EARRINGS Pendulum Triangles Construct

More information

Get the benefits of oil with the ease of latex

Get the benefits of oil with the ease of latex One of the most rewarding home improvement projects is putting a fresh coat of paint on your kitchen cabinets. A new color brightens up your kitchen, and can give it a complete updated look. But at the

More information

Fab Feathers by Amanda Greene / #21008 / 31 Designs

Fab Feathers by Amanda Greene / #21008 / 31 Designs by Amanda Greene / #21008 / 31 Designs Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity when rescaling or rotating

More information

Materials Required. Gravel / Small Stones. Floor Tile Bases* Multi Tool. Masking Tape. Toothpaste Cap. Nails. Bits of Bark Paperclips.

Materials Required. Gravel / Small Stones. Floor Tile Bases* Multi Tool. Masking Tape. Toothpaste Cap. Nails. Bits of Bark Paperclips. Materials Required Gravel / Small Stones Floor Tile Bases* Masking Tape Multi Tool Nails Toothpaste Cap Bits of Bark Paperclips Paint Glue Sculpty (Oven Bake Clay) Basing Materials Required Hobby Lichen

More information

Loop-de-Loop DesignWorks #21016DW / 15 Designs / 38 Files

Loop-de-Loop DesignWorks #21016DW / 15 Designs / 38 Files oop-de-oop DesignWorks #21016DW / 15 Designs / 38 Files Note: Use DesignWorks Software to edit CutWork, PaintWork and CrystalWork designs, including rescaling, rotating, and mirror imaging. 21016-01_DW

More information

Tips & Tricks using Part 17

Tips & Tricks using Part 17 Tips & Tricks using Part 17 Making a Secret Door Using Mold #96...1 Using Cotton Swabs For Antiquing...4 Planning Dungeon Waterways...5 Pouring and Texturing Water...6 Making Water for Fountains...11 Tips

More information

The Papernator 2003 created and designed by Clive Davis, NAR #80412

The Papernator 2003 created and designed by Clive Davis, NAR #80412 The Papernator 2003 created and designed by Clive Davis, NAR #80412 CG with motor loaded= 3.75 (9.6 cm) from base nose weight = 1/2 oz or 15 grams body tube nose cone shock cord mount fins (4 qty) launch

More information

How to use a Touch Up Bottle & Brush

How to use a Touch Up Bottle & Brush How to use a Touch Up Bottle & Brush Tech Tips General Definitions Base Color (Basecoat): A color coat requiring a clear coat. Base Color provides color and appearance, while the clear coat provides gloss

More information

Building the 1, 2, or 3 Car

Building the 1, 2, or 3 Car Building the 1, 2, or 3 Car Garage kit by Railroad Kits. Thanks to Bob Butts for doing the building construction and writing / taking pictures. If this is your first craftsman kit or Railroad Kits purchase

More information

Explorer Wiring Kit (assembled)

Explorer Wiring Kit (assembled) Explorer Wiring Kit (assembled) For Vintage, Firestorm & Standard Series Please Read All Instructions Before Beginning. Tools you will need: Soldering Iron (35 watt preferably) Solder Wet Sponge Wire Clippers

More information

BEFORE YOU GET STARTED... MATERIALS & TOOLS

BEFORE YOU GET STARTED... MATERIALS & TOOLS BEFORE YOU GET STARTED... MATERIALS & TOOLS You will need the following materials and craft tools to be able to make your diorama 5x sheets of A4 colored paper* 1x sheet of A4 white paper or card 1x cutting

More information

Making Paper. A Wood Magic Show Project for Kids

Making Paper. A Wood Magic Show Project for Kids Making Paper A Wood Magic Show Project for Kids 2001 Contents: Introduction 1 Before you begin 2 What you will need 3 Instructions Making your frames Making your slurry Making your paper mat Drying your

More information

ProSeal Instructions for RB67 film back and camera body

ProSeal Instructions for RB67 film back and camera body ProSeal Instructions for RB67 film back and camera body Please read these instructions completely before you start. Knowledge strengthens confidence, and like most jobs, this is better done right the first

More information

Make Your Own Dept 56 Accessories Tombstones. Tombstones

Make Your Own Dept 56 Accessories Tombstones. Tombstones Make Your Own Dept 56 Accessories This is one of the many Make Your Own Dept 56 Accessories reports that describe, in detail, the necessary steps to make you own D56 accessories. All accessories are made

More information

San Felipe: Step by Step Pack 3

San Felipe: Step by Step Pack 3 Pack 3 Your parts Bulwarks Gun port covers x 2 Tools and equipment Wood glue Sandpaper Brushes Wood stain Hammer Pin pusher/nails Razor saw a Remove the longer bulwark and test-fit it in place at the bow

More information

The galaxy nightlight glass will sit over the LED candle, which will shine through to make all the comets and stars and planets pulse with color.

The galaxy nightlight glass will sit over the LED candle, which will shine through to make all the comets and stars and planets pulse with color. The galaxy nightlight glass will sit over the LED candle, which will shine through to make all the comets and stars and planets pulse with color. 2 10 9 8 7 6 5 4 3 2 Blast Off! Let s begin! MAKING PLANETS

More information

Assembly Instructions

Assembly Instructions Assembly Instructions Parts Included: 1 Nose Cone 1 Body Tube 3 1/8 Balsa Fins 1 Thrust Ring 1 Motor Tube 1 Motor Hook 1 Motor Sleeve 2 Centering Rings 1 Launch Lug 1 Kevlar Shock Cord (yellow) 1 Elastic

More information

WITCHES BREW. by Shannon B. Reilly

WITCHES BREW. by Shannon B. Reilly WITCHES BREW EX C L by Shannon B. Reilly U SI VE Witches Brew by Shannon B. Reilly PALETTE: DecoArt Acrylics Antique Gold Deep 13146 Avocado 13052 Banana Cream 13545 Burnt Orange 13016 Honey Brown 13163

More information

Poured Paint. Create with Yarn and. Use yarn and poured paint to create a vibrant folk-art style painting

Poured Paint. Create with Yarn and. Use yarn and poured paint to create a vibrant folk-art style painting Level: Beginner to Intermediate Flesch-Kincaid Grade Level: 7.3 Flesch-Kincaid Reading Ease: 69.84 Drawspace Curriculum 8.4.A4-6 Pages and 12 Illustrations Create with Yarn and Poured Paint Use yarn and

More information

Snowball Tree by Deb Antonick

Snowball Tree by Deb Antonick Snowball Tree by Deb Antonick Snowball Tree By Deb Antonick Palette: DecoArt Americana SoSoft Acrylics Antique Gold #14400 Baby Blue #14402 Brown #14408 Burnt Sienna #14409 Buttermilk #14410 Cadmium Orange

More information

A Colorful World Illustrated Art Lessons

A Colorful World Illustrated Art Lessons A Colorful World Preparing to Paint Materials: paint egg cartons paintbrushes newspaper paper towels water jars paper Gather materials. If possible, provide a variety of brushes: small round, medium round,

More information

Thank you for purchasing E.L. Moore Window & Door.

Thank you for purchasing E.L. Moore Window & Door. Thank you for purchasing E.L. Moore Window & Door. Instructions Version 4.28.15 I ve named this kit after one of the greatest modelers I ve ever known, the late Elliot Moore Jr. Rest in peace my friend.

More information

Creative Line Quilting by Amanda Greene / #82013 / 45 Designs

Creative Line Quilting by Amanda Greene / #82013 / 45 Designs Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity when rescaling or rotating designs in your software, always rescale

More information