Papper - Skrivar- och kontorspapper - Krav på papper för torrtonerskrivare och kopiatorer

Size: px
Start display at page:

Download "Papper - Skrivar- och kontorspapper - Krav på papper för torrtonerskrivare och kopiatorer"

Transcription

1 Paper - Printing and business paper - Requirements for copy paper for dry toner imaging processes Papper - Skrivar- och kontorspapper - Krav på papper för torrtonerskrivare och kopiatorer The European Prestandard has the status of a Swedish Standard. This document contains the English version of. Swedish Standards corresponding to documents referred to in this Standard are listed in Catalogue of Swedish Standards, issued by SIS. The Catalogue lists, with reference number and year of Swedish approval, International and European Standards approved as Swedish Standards as well as other Swedish Standards. Den europeiska förstandarden gäller som svensk standard. Detta dokument innehåller den engelska versionen av. Motsvarigheten och aktualiteten i svensk standard till de publikationer som omnämns i denna standard framgår av Katalog över svensk standard, som ges ut av SIS. I katalogen redovisas internationella och europeiska standarder som fastställts som svenska standarder och övriga gällande svenska standarder.

2

3 English version Paper - Printing and business paper - Requirements for copy paper for dry toner imaging processes Papier Papier d impression et de bureau - Papier - Druck- und Büropapiere - Specifications pour papier pour photocopie Anforderungen an Kopierpapier für pour précédes de reproduction par toner sec Vervielfältigen mit Trockentoner This European Prestandard (ENV) was approved by CEN on as a prospective standard for provisional application. The period of validity of this ENV is limited initially to three years. After two years the members of CEN will be requested to submit their comments, particularly on the question whether the ENV can be converted into an European Standard (EN). CEN members are required to announce the existance of this ENV in the same way as for an EN and to make the ENV available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the ENV) until the final decision about the possible conversion of the ENV into an EN is reached. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.

4 Page 2 Provläsningsexemplar / Preview Content Foreword Introduction Scope Normative References Definitions Principle Sampling Conditioning Requirements Migratory substances Annex Annex Packaging Test report A (normative) B (normative) Runnability CEN Master Test Annex C (normative) Determination of cutting quality Page

5 Page 3 Foreword This European Prestandard has been prepared by Technical Committee CEN/TC 172 "Pulp, paper and board, the secretariat of which is held by DIN. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to announce this European Prestandard: Austria, Belgium, Denmark, Finland, France, Germany, Greace, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.

6 Page 4 Provläsningsexemplar / Preview Introduction Paper for use in dry toner imaging processes, the common copy paper, represents one of the major grades of the world s paper market end is therefore of crucial interest for the paper industry. Most copiers and laser-printers work with dry toner imaging. Several national standards for copy paper apply in Europe. Since the implementation of the European Union Act (January 1993) and the growing trade-volume within the European countries (EU and EFTA), there has been an acute need to harmonize existing standards. The aim is to facilitate business and, ultimately, bring about greater customer satisfaction. The CEN/TC 172 standardization work has concentrated on the prevalent features of the bulk of the copy paper market, to avoid making a European Prestandard that would be too complex or too indecisive. When creating this European Prestandard, the responsible working group was faced with the fact that analysis methods were not always precise enough to predict the performance of copy paper in various imaging machines. Therefore, CEN/TC 172 has put aside several technical paper characteristics and focused on defining and specifying the equivalents of printability and runnabiliy, as well as on those paper properties that directly appeal to the end-user. Since a standard copier does not exist and customer demands on some accommodating and aesthetic aspects will vary, several characteristics were not given a required value. In such cases, though, test methods are provided that will facilitate the making of adequate agreements between supplier and customer. CEN/TC 172 has decided to publish this specification as a European Prestandard, because the responsible working group has also developed five test methods that do require limit values, but still lack sufficient practical experience to complete yet. However, it was felt necessary to publish the work to make the market aware of the standard and start using it. The responsible working group will continue the work and has the ambition to finalise it as an EN, within two years, or earlier, if adequate results are obtained. 1 Scope This European Prestandard specifies the requirements for uncoated cut-size paper sheets for dry toner imaging processes (i.e. copy paper), in 80 g/m 2 and in A4 format based on EN Other grammages and sizes of the ISO-A series are covered by this European Prestandard, as long as the requirements specified in this European Prestandard are fulfilled. 2 Normative References This European Prestandard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Prestandard only when incorporated in it by amendment or revision. For dated references the latest edition of the publication referred to applies. EN 644 Paper untrimmed sizes - Primary range and supplementary range designation and tolerance - Expression of direction of manufacture ENV Printing and business paper - Determination of the coefficient of static friction ENV Paper - Printing and business paper - Determination of edge dust ENV Paper - Printing and business paper - Determination of toner adhesion EN Paper, baord and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187: 1990) EN Writing paper and certain classes of printed matter - Trimmed sizes - A and B series (ISO 216: 1975)

7 Page 5 EN EN (ISO 534: 1988) EN ISO 186 EN ISO 536 Determination of moisture content - Oven drying method (ISO 287: 1985) Determination of thickness and apparent bulk density or apparent sheet density Sampling to determine average quality (ISO 186: 1994) Determination of grammage (ISO 536: 1995) ISO 2471 Determination of opacity (paper backing) ISO 3783 Determination of resistance to picking - (Electric model) ISO 4046 Paper, board, pulp and related terms - Vocabulary - Diffuse reflectance method Accelerating speed method using the IGT tester lso/dis ClE-Whiteness (outdoor daylight, D 65/10 ) lso/dis Measurement of curl in cut-sized office writing papers IEC 93 Test method for surface resistivity DIN Testing of paper and board - Determination of abrasion by the abrasion wheel method NF Q Essais des papier et carton - Détermination de la resistance à I abrasion du papier et du carton, selon la méthode TABER 3 Definitions For the purposes of this Prestandard the following definitions apply: 3.1 cut size paper sheet: Sheets, cut according to the ISO-A series standard. 3.2 dry toner: Ink powder used for imaging in printers and copiers [ENV 12283] 3.3 dry toner imaging process: Imaging method using dry toner, that is generally fixed on paper by heat and/or pressure [ENV 12283] 3.4 paper jam: Paper induced failure in the copy/print process path, causing a machine shut-down requiring corrective action by the operator. Included are failures in sorter-bins and/or collection-trays, when operating below 80 % of each single bin s maximum capacity, as stated by the machine manufacturer. Excluded are control panel actions. 3.5 Curl curl: Deformation of a sheet of paper or board over all its surface which therefore tends to roll up on itself (see ISO 4046) curl before copy: Curl of the paper taken directly from the moisture-proof wrapping.

8 Page 6 Provläsningsexemplar / Preview curl paper machine direction K MD : Measurement of curl as the reciprocal of the radius of curvature in the grain direction of paper. This means that for long grain paper, the curl of the 210 mm edge of a sheet or a group of ten sheets, is measured curl paper cross direction K CD : Measurement of curl as reciprocal of the radius of curvature in the grain direction of paper. This means that for short grain paper, the curl of the 297 mm edge of a sheet or a group of ten sheets, is measured angle of curl: The angle of curl is the angle measured between the axis of the machine direction of the paper, and the axis around which the paper is curling. It is positive if the calculated angle of the axis of curl towards machine direction is clockwise. The range is between 0 and 90. Angle of curl is expressed in degrees. 4 Principle Printability and runnability are the main functional properties and a number of characteristics related to these properties are specified. Some of these properties are also very much dependent on the machines and the required Iimits should be agreed between customer and supplier. These properties are curl before and after copy, and toner adhesion. For some properties, limiting values are now given in this European Prestandard, these are jamming, moisture content and surface resistivity. For opacity, a minimum value is given for paper to be used for duplex copying. Full tolerance values will be set for coefficient of friction (see ENV 12448), edge dust (see ENV 12282) and cutting quality at a future date as the test methods for these properties are either new, or are not frequently used for this type of paper. Until more experience is gained only target values or no limit values will be specified. Those with experience of abrasion resistance testing may use this in place of surface strength test. As this test method is very much machine dependant, low tolerance limits have been set. To fully describe the kind of papers, it is recommended to test also some other properties. These are grammage, thickness and whiteness. Provision is made to prevent harmfull contamination of machinery by paper or packaging components. 5 Sampling Samples shall be taken in accordance with EN ISO 186. For the testing of jamming, curl, moisture content and cutting quality, the samples are to be taken directly out of the package. 6 Conditioning The sample from which the specimens are taken shall be conditioned under standard atmosphere 23/50 in accordance with EN 20187, unless specifically stated otherwise. 7 Requirements The performance requirements for copy paper are listed in table 1.

Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 1: Classification

Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 1: Classification Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 1: Classification Färg och lack - Färger och färgsystem för målning på utvändig murning och betong

More information

Tandvård - Extraktionstänger - Del 1: Tångmodeller med skruv- eller stiftlänk (ISO :1991)

Tandvård - Extraktionstänger - Del 1: Tångmodeller med skruv- eller stiftlänk (ISO :1991) Dental extraction forceps - Part 1: Screw and pin joint types (ISO 9173-1:1991) Tandvård - Extraktionstänger - Del 1: Tångmodeller med skruv- eller stiftlänk (ISO 9173-1:1991) The European Standard has

More information

SVENSK STANDARD SS-EN 1904

SVENSK STANDARD SS-EN 1904 SVENSK STANDARD SS-EN 1904 Fastställd Utgåva Sida 2001-04-06 1 1 (1+7) Copyright SIS. Reproduction in any form without permission is prohibited. Precious metals The finenesses of solders used with precious

More information

Soldering and brazing materials Methods for the sampling of soft solders for analysis (ISO 10564:1993)

Soldering and brazing materials Methods for the sampling of soft solders for analysis (ISO 10564:1993) Soldering and brazing materials Methods for the sampling of soft solders for analysis (ISO 10564:1993) Tillsatsmaterial för Iödning - Metoder för provtagning av mjuklöd för analys (ISO 10564:1993) The

More information

SVENSK STANDARD SS-EN ISO

SVENSK STANDARD SS-EN ISO SVENSK STANDARD SS-EN ISO 12224-2 Handläggande organ Fastställd Utgåva Sida SVENSK MATERIAL- & MEKANSTANDARD, SMS 1999-09-30 1 1 (1+6) Copyright SIS. Reproduction in any form without permission is prohibited.

More information

SVENSK STANDARD SS-EN ISO

SVENSK STANDARD SS-EN ISO SVENSK STANDARD SS-EN ISO 8321-2 Handläggande organ Fastställd Utgåva Sida Hälso- och sjukvårdsstandardiseringen, HSS 2000-06-30 1 1 (1+12) Copyright SIS. Reproduction in any form without permission is

More information

Färg och lack- Färger och färgsystem för målning på trä utomhus - Del 1: Klassificering och urval

Färg och lack- Färger och färgsystem för målning på trä utomhus - Del 1: Klassificering och urval Paints and varnishes - Coating materials and coating systems for exterior wood - Part 1: Classification and selection Färg och lack- Färger och färgsystem för målning på trä utomhus - Del 1: Klassificering

More information

SVENSK STANDARD SS-EN 12892

SVENSK STANDARD SS-EN 12892 SVENSK STANDARD SS-EN 12892 Handläggande organ Fastställd Utgåva Sida SVENSK MATERIAL- & MEKANSTANDARD, SMS 2000-09-01 1 1 (1+17) Copyright SIS. Reproduction in any form without permission is prohibited.

More information

SVENSK STANDARD SS-EN 660-2

SVENSK STANDARD SS-EN 660-2 SVENSK STANDARD SS-EN 660-2 Handläggande organ Fastställd Utgåva Sida Byggstandardiseringen, BST 1999-05-21 1 1 (1+10) Copyright SIS. Reproduction in any form without permission is prohibited. Resilient

More information

SVENSK STANDARD SS-EN ISO 6103

SVENSK STANDARD SS-EN ISO 6103 SVENSK STANDARD SS-EN ISO 6103 Handläggande organ Fastställd Utgåva Sida SVENSK MATERIAL- & MEKANSTANDARD, SMS 1999-12-10 1 1 (1+10) Copyright SIS. Reproduction in any form without permission is prohibited.

More information

SVENSK STANDARD SS-EN ISO 15253

SVENSK STANDARD SS-EN ISO 15253 SVENSK STANDARD SS-EN ISO 15253 Fastställd Utgåva Sida 2001-05-04 1 1 (1+27) Copyright SIS. Reproduction in any form without permission is prohibited. Ophthalmic optics and instruments Optical devices

More information

SVENSK STANDARD SS-EN ISO 105-J01

SVENSK STANDARD SS-EN ISO 105-J01 SVENSK STANDARD SS-EN ISO 105-J01 Handläggande organ Fastställd Utgåva Sida Standardiseringsgruppen STG 1999-06-04 1 1 (1+16) Copyright SIS. Reproduction in any form without permission is prohibited. Textiles

More information

Dragskivor Dragskivor för tråd, stång eller rör Råformad hårdmetall

Dragskivor Dragskivor för tråd, stång eller rör Råformad hårdmetall Wire, bar or tube drawing dies As-sintered pellets of hard metal (carbide) Dimensions Dragskivor Dragskivor för tråd, stång eller rör Råformad hårdmetall Mått The International Standard ISO 2804:1996 has

More information

SVENSK STANDARD SS-EN ISO 105-C07

SVENSK STANDARD SS-EN ISO 105-C07 SVENSK STANDARD SS-EN ISO 105-C07 Fastställd Utgåva Sida 2001-08-17 1 1 (1+6) Copyright SIS. Reproduction in any form without permission is prohibited. Textiles Tests for colour fastness Part C07: Colour

More information

SVENSK STANDARD SS-EN

SVENSK STANDARD SS-EN SVENSK STANDARD SS-EN 12668-2 Fastställd Utgåva Sida 2001-06-08 1 1 (1+51) Copyright SIS. Reproduction in any form without permission is prohibited. Non-destructive testing Characterization and verification

More information

SVENSK STANDARD SS-EN 12883

SVENSK STANDARD SS-EN 12883 SVENSK STANDARD SS-EN 12883 Handläggande organ Fastställd Utgåva Sida SVENSK MATERIAL- & MEKANSTANDARD, SMS 2000-09-01 1 1 (1+18) Copyright SIS. Reproduction in any form without permission is prohibited.

More information

SVENSK STANDARD SS-ISO 10549

SVENSK STANDARD SS-ISO 10549 SVENSK STANDARD SS-ISO 10549 Fastställd Utgåva Sida 2001-02-02 1 1 (1+14) Copyright SIS. Reproduction in any form without permission is prohibited. Micrographics A6 size aperture cards Mikrografi Fönsterkort

More information

SVENSK STANDARD SS-EN 13300

SVENSK STANDARD SS-EN 13300 SVENSK STANDARD SS-EN 13300 Fastställd Utgåva Sida 2001-06-08 1 1 (1+6) Copyright SIS. Reproduction in any form without permission is prohibited. Paint and varnishes Water-borne coating materials and coating

More information

Kolfibrer - Bestämning av fiberdiameter och tvärsnittsyta. Carbon fibre - Determination of filament diameter and crosssectional

Kolfibrer - Bestämning av fiberdiameter och tvärsnittsyta. Carbon fibre - Determination of filament diameter and crosssectional Carbon fibre - Determination of filament diameter and crosssectional area Kolfibrer - Bestämning av fiberdiameter och tvärsnittsyta The International Standard ISO 11667:1995 has the status of a Swedish

More information

Fästelement Sextandhålsskruvar med cylinderhuvud (ISO 14580:2001) Hexalobular socket cheese head screws (ISO 14580:2001)

Fästelement Sextandhålsskruvar med cylinderhuvud (ISO 14580:2001) Hexalobular socket cheese head screws (ISO 14580:2001) SVENSK STANDARD SS-EN ISO 14580 Fastställd 2001-09-28 Utgåva 1 Fästelement Sextandhålsskruvar med cylinderhuvud (ISO 14580:2001) Hexalobular socket cheese head screws (ISO 14580:2001) ICS 21.060.10 Språk:

More information

SVENSK STANDARD SS-EN ISO 3668

SVENSK STANDARD SS-EN ISO 3668 SVENSK STANDARD SS-EN ISO 3668 Fastställd Utgåva Sida 2001-06-08 1 1 (1+12) Copyright SIS. Reproduction in any form without permission is prohibited. Paints and varnishes Visual comparison of the colour

More information

SVENSK STANDARD SS-EN ISO 2813

SVENSK STANDARD SS-EN ISO 2813 SVENSK STANDARD SS-EN ISO 2813 Handläggande organ Fastställd Utgåva Sida Standardiseringsgruppen STG 1999-10-29 1 1 (1+11) Copyright SIS. Reproduction in any form without permission is prohibited. Paints

More information

Vägfordon - Hydraulbromssystem - Bromsrör med konisk anslutning

Vägfordon - Hydraulbromssystem - Bromsrör med konisk anslutning Road vehicles - Hydraulic braking systems - Simple flare pipes, tapped holes, male fittings and hose end fittings Vägfordon - Hydraulbromssystem - Bromsrör med konisk anslutning The International Standard

More information

SVENSK STANDARD SS-ISO 12650

SVENSK STANDARD SS-ISO 12650 SVENSK STANDARD SS-ISO 12650 Handläggande organ Fastställd Utgåva Sida Standardiseringsgruppen STG 1999-08-06 1 1 (1+6) Copyright SIS. Reproduction in any form without permission is prohibited. Document

More information

Schemaregler och dokumentation - Flödesscheman för processanläggningar - Allmänna regler Flow diagrams for process plants - General rules

Schemaregler och dokumentation - Flödesscheman för processanläggningar - Allmänna regler Flow diagrams for process plants - General rules Schemaregler och dokumentation - Flödesscheman för processanläggningar - Allmänna regler Flow diagrams for process plants - General rules Flow diagrams for process plants - General rules Schemaregler

More information

lndustrirobotar - Mekaniska verktygsanslutningar - Del 2: Skaft (form A)

lndustrirobotar - Mekaniska verktygsanslutningar - Del 2: Skaft (form A) STANDARDISERINGEN I SVERIGE SWEDISH STANDARDS INSTITUTION SVENSK STANDARD SS-ISO 9409-2 Handläggande organ Fastställd Utgåva Sida MATERIAL- OCH MEKANSTANDARDISERINGEN, MMS 1996-03-15 1 1 (1+9) SIS FASTSTÄLLER

More information

SVENSK STANDARD SS-ISO

SVENSK STANDARD SS-ISO SVENSK STANDARD SS-ISO 3019-2 Fastställd Utgåva Sida 2001-07-27 1 1 (1+22) Copyright SIS. Reproduction in any form without permission is prohibited. Hydraulic fluid power Dimensions and identification

More information

SVENSK STANDARD SS-EN

SVENSK STANDARD SS-EN SVENSK STANDARD SS-EN 10270-1 Fastställd Utgåva Sida 2001-05-04 1 1 (1+26) Copyright SIS. Reproduction in any form without permission is prohibited. Steel wire for mechanical springs Part 1: Patented cold

More information

Fästelement Sexkanthålsskruvar med sänkhuvud (ISO 10642:2004) Hexagon socket countersunk head screws (ISO 10642:2004)

Fästelement Sexkanthålsskruvar med sänkhuvud (ISO 10642:2004) Hexagon socket countersunk head screws (ISO 10642:2004) SVENSK STANDARD SS-EN ISO 10642:2004 Fastställd 2004-03-19 Utgåva 2 Fästelement Sexkanthålsskruvar med sänkhuvud (ISO 10642:2004) Hexagon socket countersunk head screws (ISO 10642:2004) ICS 21.060.10 Språk:

More information

SVENSK STANDARD SS-EN 1807

SVENSK STANDARD SS-EN 1807 SVENSK STANDARD SS-EN 1807 Handläggande organ Fastställd Utgåva Sida SVENSK MATERIAL- & MEKANSTANDARD, SMS 1999-10-15 1 1 (1+80) Copyright SIS. Reproduction in any form without permission is prohibited.

More information

SVENSK STANDARD SS-EN

SVENSK STANDARD SS-EN Provläsningsexemplar / Preview SVENSK STANDARD SS-EN 10246-5 Handläggande organ Fastställd Utgåva Sida SVENSK MATERIAL- & MEKANSTANDARD, SMS 1999-12-17 1 1 (1+12) Copyright SIS. Reproduction in any form

More information

Fasteners Torque/clamp force testing (ISO 16047:2005)

Fasteners Torque/clamp force testing (ISO 16047:2005) SVENSK STANDARD SS- Fastställd 2005-02-18 Utgåva 1 Fästelement Provning av moment/kraftutbyte (ISO 16047:2005) Fasteners Torque/clamp force testing (ISO 16047:2005) ICS 21.060.01 Språk: engelska Publicerad:

More information

Hexagon socket button head screws (ISO 7380:2004)

Hexagon socket button head screws (ISO 7380:2004) SVENSK STANDARD SS-EN ISO 7380:2004 Fastställd 2004-02-06 Utgåva 2 Fästelement Sexkanthålsskruvar med rundat huvud (ISO 7380:2004) Hexagon socket button head screws (ISO 7380:2004) ICS 21.060.10 Språk:

More information

SVENSK STANDARD SS-EN

SVENSK STANDARD SS-EN SVENSK STANDARD SS-EN 13900-3 Fastställd 2003-02-21 Utgåva 1 Pigments and extenders Methods of dispersion and assessment of dispersibility in plastics Part 3: Determination of colouristic properties and

More information

Fästelement Sexkanthålsskruvar (ISO 4762:2004) Hexagon socket head cap screws (ISO 4762:2004)

Fästelement Sexkanthålsskruvar (ISO 4762:2004) Hexagon socket head cap screws (ISO 4762:2004) SVENSK STANDARD SS- Fastställd 2004-03-19 Utgåva 2 Fästelement Sexkanthålsskruvar (ISO 4762:2004) Hexagon socket head cap screws (ISO 4762:2004) ICS 21.060.10 Språk: engelska Publicerad: maj 2004 Copyright

More information

SVENSK STANDARD SS-EN :2004. Stållinor Säkerhet Del 10: Spirallinor för allmänna byggnadsändamål

SVENSK STANDARD SS-EN :2004. Stållinor Säkerhet Del 10: Spirallinor för allmänna byggnadsändamål SVENSK STANDARD SS-EN 12385-10:2004 Fastställd 2004-01-09 Utgåva 1 Stållinor Säkerhet Del 10: Spirallinor för allmänna byggnadsändamål Steel wire ropes Safety Part 10: Spiral ropes for general structural

More information

SVENSK STANDARD SS-EN ISO :2004. Ögonoptik Råkantade färdiga glasögonglas Del 2: Progressiva glas (ISO :2004)

SVENSK STANDARD SS-EN ISO :2004. Ögonoptik Råkantade färdiga glasögonglas Del 2: Progressiva glas (ISO :2004) SVENSK STANDARD SS- Fastställd 2004-03-12 Utgåva 2 Ögonoptik Råkantade färdiga glasögonglas Del 2: Progressiva glas (ISO 8980-2:2004) Ophthalmic optics Uncut finished spectacle lenses Part 2: Specifications

More information

SVENSK STANDARD SS-EN 12717

SVENSK STANDARD SS-EN 12717 SVENSK STANDARD SS-EN 12717 Fastställd Utgåva Sida 2001-05-04 1 1 (1+37) Copyright SIS. Reproduction in any form without permission is prohibited. Safety of machine tools Drilling machines Verktygsmaskiner

More information

SVENSK STANDARD SS-ISO

SVENSK STANDARD SS-ISO SVENSK STANDARD SS-ISO 7588-2 Handläggande organ Fastställd Utgåva Sida SVENSK MATERIAL- & MEKANSTANDARD, SMS 1999-08-27 1 1 (1+7) Copyright SIS. Reproduction in any form without permission is prohibited.

More information

SVENSK STANDARD SS-EN Flexibla tätskikt Bestämning av längd, bredd och rakhet Del 1: Bitumenbaserade tätskikt för tak

SVENSK STANDARD SS-EN Flexibla tätskikt Bestämning av längd, bredd och rakhet Del 1: Bitumenbaserade tätskikt för tak SVENSK STANDARD SS-EN 1848-1 Fastställd 2000-05-26 Utgåva 1 Flexibla tätskikt Bestämning av längd, bredd och rakhet Del 1: Bitumenbaserade tätskikt för tak Flexible sheets for waterproofing Determination

More information

Hexagon socket set screws with cup point (ISO 4029:2003)

Hexagon socket set screws with cup point (ISO 4029:2003) SVENSK STANDARD SS-EN ISO 4029:2004 Fastställd 2004-01-09 Utgåva 1 Fästelement Stoppskruvar med sexkantshål och skål (ISO 4029:2003) Hexagon socket set screws with cup point (ISO 4029:2003) ICS 21.060.10

More information

SVENSK STANDARD SS-EN ISO :2004

SVENSK STANDARD SS-EN ISO :2004 SVENSK STANDARD SS-EN ISO 12224-3:2004 Fastställd 2004-10-08 Utgåva 1 Lödtråd för mjuklödning, massiv och flussfylld Specifikation och provningsmetoder Del 3: Vätningsbalansmetod för bestämning av effektiviteten

More information

Belysningsstolpar Del 2: Allmänna krav och mått

Belysningsstolpar Del 2: Allmänna krav och mått SVENSK STANDARD SS-EN 40-2:2004 Fastställd 2004-10-22 Utgåva 1 Belysningsstolpar Del 2: Allmänna krav och mått Lighting columns Part 2: General requirements and dimensions ICS 93.080.40 Språk: engelska

More information

Plywood Limningskvalitet Del 1: Provning. Plywood Bonding quality Part 1: Test methods

Plywood Limningskvalitet Del 1: Provning. Plywood Bonding quality Part 1: Test methods SVENSK STANDARD SS-EN 314-1:2005 Fastställd 2005-01-14 Utgåva 2 Plywood Limningskvalitet Del 1: Provning Plywood Bonding quality Part 1: Test methods ICS 79.060.10 Språk: engelska Publicerad: februari

More information

Färg och lack Bestämning av härdighet mot filiformkorrosion Del 1: Stålunderlag (ISO :2000)

Färg och lack Bestämning av härdighet mot filiformkorrosion Del 1: Stålunderlag (ISO :2000) SVENSK STANDARD SS-EN ISO 4623-1 Fastställd 2002-07-05 Utgåva 1 Färg och lack Bestämning av härdighet mot filiformkorrosion Del 1: Stålunderlag (ISO 4623-1:2000) Paints and varnishes Determination of resistance

More information

Ritmateriel Stiftpennor Del 3: Svarta stift HB-stifts böjstyrka. Mechanical pencils Part 3: Black leads Bending strengths of HB leads

Ritmateriel Stiftpennor Del 3: Svarta stift HB-stifts böjstyrka. Mechanical pencils Part 3: Black leads Bending strengths of HB leads STANDARDISERINGEN I SVERIGE SWEDISH STANDARDS INSTITUTION SVENSK STANDARD SS-ISO 9177-3 Handläggande organ Fastställd Utgåva Sida MATERIAL- OCH MEKANSTANDARDISERINGEN, MMS 1996-03-15 1 1 (1+5) SIS FASTSTÄLLER

More information

SVENSK STANDARD SS-ISO

SVENSK STANDARD SS-ISO SVENSK STANDARD SS-ISO 7588-1 Handläggande organ Fastställd Utgåva Sida SVENSK MATERIAL- & MEKANSTANDARD, SMS 1999-08-27 2 1 (1+9) Copyright SIS. Reproduction in any form without permission is prohibited.

More information

SVENSK STANDARD SS-ISO

SVENSK STANDARD SS-ISO SVENSK STANDARD SS-ISO 128-23 Fastställd Utgåva Sida 2001-03-16 1 1 (1+15) Copyright SIS. Reproduction in any form without permission is prohibited. Technical drawings General principles of presentation

More information

Ritmateriel Spetsar till handhållna rörtuschpennor för ritpapper Del 1: Definitioner, mått, beteckning och märkning

Ritmateriel Spetsar till handhållna rörtuschpennor för ritpapper Del 1: Definitioner, mått, beteckning och märkning STANDARDISERINGEN I SVERIGE SWEDISH STANDARDS INSTITUTION SVENSK STANDARD SS-ISO 9175-1 Handläggande organ Fastställd Utgåva Sida MATERIAL- OCH MEKANSTANDARDISERINGEN, MMS 1996-03-15 1 1 (1+5) SIS FASTSTÄLLER

More information

Tandvård Roterande instrument Del 2: Putsborr (ISO :2003) Dentistry Rotary bur instruments Part 2: Finishing burs (ISO :2003)

Tandvård Roterande instrument Del 2: Putsborr (ISO :2003) Dentistry Rotary bur instruments Part 2: Finishing burs (ISO :2003) SVENSK STANDARD SS-EN ISO 3823-2:2004 Fastställd 2004-10-08 Utgåva 1 Tandvård Roterande instrument Del 2: Putsborr (ISO 3823-2:2003) Dentistry Rotary bur instruments Part 2: Finishing burs (ISO 3823-2:2003)

More information

SVENSK STANDARD SS-EN

SVENSK STANDARD SS-EN SVENSK STANDARD SS-EN 1870-4 Fastställd Utgåva Sida 2001-04-06 1 1 (1+36) Copyright SIS. Reproduction in any form without permission is prohibited. Safety of woodworking machines Circular sawing machines

More information

SVENSK STANDARD SS-EN 13975

SVENSK STANDARD SS-EN 13975 SVENSK STANDARD SS-EN 13975 Fastställd 2003-08-01 Utgåva 1 In vitro-diagnostik Statistisk acceptanskontroll för in vitro-diagnostiska medicintekniska produkter Statistiska överväganden Sampling procedures

More information

Injection containers and accessories Part 1: Injection vials made of glass tubing (ISO :2003)

Injection containers and accessories Part 1: Injection vials made of glass tubing (ISO :2003) SVENSK STANDARD SS-EN ISO 8362-1:2004 Fastställd 2004-09-24 Utgåva 1 Behållare för injektionsvätskor Del 1: Injektionsflaskor och injektionsampuller tillverkade av glasrör (ISO 8362-1:2003) Injection containers

More information

Workbenches for laboratories Dimensions, safety requirements and test methods

Workbenches for laboratories Dimensions, safety requirements and test methods SVENSK STANDARD SS-EN 13150 Fastställd 2001-11-23 Utgåva 1 Arbetsbänkar för laboratorier Dimensioner, säkerhetskrav och provningsmetoder Workbenches for laboratories Dimensions, safety requirements and

More information

SVENSK STANDARD SS-EN

SVENSK STANDARD SS-EN SVENSK STANDARD SS-EN 13068-1 Handläggande organ Fastställd Utgåva Sida SVENSK MATERIAL- & MEKANSTANDARD, SMS 1999-12-03 1 1 (1+22) Copyright SIS. Reproduction in any form without permission is prohibited.

More information

ISO INTERNATIONAL STANDARD. Nomenclature Specification for a nomenclature system for medical devices for the purpose of regulatory data exchange

ISO INTERNATIONAL STANDARD. Nomenclature Specification for a nomenclature system for medical devices for the purpose of regulatory data exchange INTERNATIONAL STANDARD ISO 15225 First edition 2000-09-15 Nomenclature Specification for a nomenclature system for medical devices for the purpose of regulatory data exchange Nomenclature Spécifications

More information

SVENSK STANDARD SS-EN 14136:2004

SVENSK STANDARD SS-EN 14136:2004 SVENSK STANDARD SS-EN 14136:2004 Fastställd 2004-07-16 Utgåva 1 In vitro-diagnostik Användning av externa kvalitetsbedömningsprogram för utvärdering av hur in vitro-diagnostiska undersökningar fungerar

More information

Ergonomiska principer vid utformning av arbetssystem (ISO 6385:2004) Ergonomic principles in the design of work systems (ISO 6385:2004)

Ergonomiska principer vid utformning av arbetssystem (ISO 6385:2004) Ergonomic principles in the design of work systems (ISO 6385:2004) SVENSK STANDARD SS- Fastställd 2004-02-27 Utgåva 1 Ergonomiska principer vid utformning av arbetssystem (ISO 6385:2004) Ergonomic principles in the design of work systems (ISO 6385:2004) ICS 13.180 Språk:

More information

SVENSK STANDARD SS-EN ISO 2692:2007

SVENSK STANDARD SS-EN ISO 2692:2007 SVENSK STANDARD SS-EN ISO 2692:2007 Fastställd 2007-01-08 Utgåva 1 Geometriska produktspecifikationer (GPS) Form- och lägetoleranser Max materialkrav (MMR), min materialkrav (LMR) och reciprocitet (RPR)

More information

Ritningsregler Järnvägar Del 1: Allmänna principer. Technical drawings Railway applications Part 1: General Principles

Ritningsregler Järnvägar Del 1: Allmänna principer. Technical drawings Railway applications Part 1: General Principles SVENSK STANDARD SS-EN 15016-1:2004 Fastställd 2004-06-18 Utgåva 1 Ritningsregler Järnvägar Del 1: Allmänna principer Technical drawings Railway applications Part 1: General Principles ICS 01.100.01 Språk:

More information

Färg och lack Färger och färgsystem för målning på utvändig murning och betong Del 1: Klassificering

Färg och lack Färger och färgsystem för målning på utvändig murning och betong Del 1: Klassificering SVENSK STANDARD SS-EN 1062-1:2004 Fastställd 2004-06-18 Utgåva 2 Färg och lack Färger och färgsystem för målning på utvändig murning och betong Del 1: Klassificering Paints and varnishes Coating materials

More information

Gummi- eller plastbelagda tyger Bestämning av rivhållfasthet Del 1: Metoder med konstant hastighet (ISO :2003)

Gummi- eller plastbelagda tyger Bestämning av rivhållfasthet Del 1: Metoder med konstant hastighet (ISO :2003) SVENSK STANDARD SS-EN ISO 4674-1 Fastställd 2003-09-26 Utgåva 1 Gummi- eller plastbelagda tyger Bestämning av rivhållfasthet Del 1: Metoder med konstant hastighet (ISO 4674-1:2003) Rubber- or plastics-coated

More information

ISO INTERNATIONAL STANDARD. Non-destructive testing Qualification of radiographic film digitisation systems Part 2: Minimum requirements

ISO INTERNATIONAL STANDARD. Non-destructive testing Qualification of radiographic film digitisation systems Part 2: Minimum requirements INTERNATIONAL STANDARD ISO 14096-2 First edition 2005-06-15 Non-destructive testing Qualification of radiographic film digitisation systems Part 2: Minimum requirements Essais non destructifs Qualification

More information

Provning av betong i färdig konstruktion Del 4: Bestämning av ultraljudhastighet

Provning av betong i färdig konstruktion Del 4: Bestämning av ultraljudhastighet SVENSK STANDARD SS-EN 12504-4:2004 Fastställd 2004-09-10 Utgåva 1 Provning av betong i färdig konstruktion Del 4: Bestämning av ultraljudhastighet Testing concrete Part 4: Determination of ultrasonic pulse

More information

ILNAS-EN 14136: /2004

ILNAS-EN 14136: /2004 05/2004 National Foreword This European Standard EN 14136:2004 was adopted as Luxembourgish Standard in May 2004. Every interested party, which is member of an organization based in Luxembourg, can participate

More information

Hot rolled square steel bars for general purposes Dimensions and tolerances on shape and dimensions

Hot rolled square steel bars for general purposes Dimensions and tolerances on shape and dimensions BRITISH STANDARD BS EN 10059:2003 Hot rolled square steel bars for general purposes Dimensions and tolerances on shape and dimensions The European Standard EN 10059:2003 has the status of a British Standard

More information

Ergonomi Datormanikiner Del 1: Allmänna krav (ISO :2005)

Ergonomi Datormanikiner Del 1: Allmänna krav (ISO :2005) SVENSK STANDARD SS-EN ISO 15536-1:2005 Fastställd 2005-05-20 Utgåva 1 Ergonomi Datormanikiner Del 1: Allmänna krav (ISO 15536-1:2005) Ergonomics Computer manikins and body templates Part 1: General requirements

More information

SVENSK STANDARD SS-EN 12481

SVENSK STANDARD SS-EN 12481 SVENSK STANDARD SS-EN 12481 Handläggande organ Fastställd Utgåva Sida SVENSK MATERIAL- & MEKANSTANDARD, SMS 2001-01-05 1 1 (1+35) Copyright SIS. Reproduction in any form without permission is prohibited.

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 14219:2003 Hexagon bolts with flange with metric fine pitch thread - Small series Hexagon bolts with flange with metric fine pitch thread - Small series EESTI STANDARDIKESKUS EESTI

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 14096-1 First edition 2005-06-15 Non-destructive testing Qualification of radiographic film digitisation systems Part 1: Definitions, quantitative measurements of image quality

More information

SVENSK STANDARD SS-ISO

SVENSK STANDARD SS-ISO SVENSK STANDARD SS-ISO 1984-1 Fastställd Utgåva Sida 2001-06-29 1 1 (1+25) Copyright SIS. Reproduction in any form without permission is prohibited. Test conditions for milling machines with table of fixed

More information

English version. Steel and steel products Location and preparation of samples and test pieces for mechanical testing (ISO 377:1997)

English version. Steel and steel products Location and preparation of samples and test pieces for mechanical testing (ISO 377:1997) EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN ISO 377 July 1997 ICS 77.040.10; 77.140.01 Descriptors: See ISO document English version Steel and steel products Location and preparation of samples

More information

Ståltråd och trådprodukter för stängsel Del 7: Svetsade paneler av tråd För inhägnader

Ståltråd och trådprodukter för stängsel Del 7: Svetsade paneler av tråd För inhägnader SVENSK STANDARD SS-EN 10223-7 Fastställd 2002-10-04 Utgåva 1 Ståltråd och trådprodukter för stängsel Del 7: Svetsade paneler av tråd För inhägnader Steel wire and wire products for fences Part 7: Steel

More information

http://www.sis.se http://www.sis.se http://www.sis.se http://www.sis.se http://www.sis.se Provläsningsexemplar / Preview SVENSK STANDARD SS-EN 4415:2006 Fastställd 2006-09-04 Utgåva 1 Aerospace series

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 1943:2003 Self adhesive tapes - Measurement of static shear adhesion Self adhesive tapes - Measurement of static shear adhesion EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL

More information

Förtillverkade betongprodukter Balkar och pelare. Precast concrete products Linear structural elements

Förtillverkade betongprodukter Balkar och pelare. Precast concrete products Linear structural elements SVENSK STANDARD SS-EN 13225:2004 Fastställd 2004-09-17 Utgåva 1 Förtillverkade betongprodukter Balkar och pelare Precast concrete products Linear structural elements ICS 91.100.30 Språk: engelska Publicerad:

More information

Provläsningsexemplar / Preview

Provläsningsexemplar / Preview SVENSK STANDARD SS-EN ISO 16021 Fastställd 2002-12-13 Utgåva 1 Absorberande hjälpmedel vid urininkontinens Principer för utvärdering av inkontinenshjälpmedel i form av engångsprodukter för vuxna, ur användarens

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 14583:2002 Hexalobular socket pan head screws Hexalobular socket pan head screws EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 13186:2005 Feather and down - Specification for feather and down filled bedding articles Feather and down - Specification for feather and down filled bedding articles EESTI STANDARDIKESKUS

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 8442-1 First edition 1997-12-15 Materials and articles in contact with foodstuffs Cutlery and table holloware Part 1: Requirements for cutlery for the preparation of food Matériaux

More information

Glass in building Special basic products Borosilicate glasses Part 1-1: Definition and general physical and mechanical properties

Glass in building Special basic products Borosilicate glasses Part 1-1: Definition and general physical and mechanical properties SVENSK STANDARD SS-EN 1748-1-1:2004 Fastställd 2004-09-17 Utgåva 1 Byggnadsglas Borosilikatglas Del 1-1: Definitioner och allmänna fysikaliska och mekaniska egenskaper Glass in building Special basic products

More information

SVENSK STANDARD SS-EN ISO :2007

SVENSK STANDARD SS-EN ISO :2007 SVENSK STANDARD SS-EN ISO 0-:00 Fastställd/Approved: 00-0- Publicerad/Published: 00-0-0 Utgåva/Edition: Språk/Language: engelska/english ICS:.00. Geometriska produktspecifikationer (GPS) Dimensionstoleranser

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 8442-8 First edition 2000-12-01 Materials and articles in contact with foodstuffs Cutlery and table holloware Part 8: Requirements for silver table and decorative holloware Matériaux

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 12228:2002 Surfaces for sports areas - Determination of joint strength of synthetic surfaces Surfaces for sports areas - Determination of joint strength of synthetic surfaces EESTI

More information

Oförstörande provning av svetsförband, formvaror av termoplast Del 2: Röntgenprovning

Oförstörande provning av svetsförband, formvaror av termoplast Del 2: Röntgenprovning SVENSK STANDARD SS-EN 13100-2:2004 Fastställd 2004-12-10 Utgåva 1 Oförstörande provning av svetsförband, formvaror av termoplast Del 2: Röntgenprovning Non-destructive testing of welded joints in thermoplastics

More information

SVENSK STANDARD SS-EN Maskinsäkerhet Människans fysiska förmåga Del 3: Rekommenderade kraftgränser vid maskinanvändning

SVENSK STANDARD SS-EN Maskinsäkerhet Människans fysiska förmåga Del 3: Rekommenderade kraftgränser vid maskinanvändning SVENSK STANDARD SS-EN 1005-3 Fastställd 2002-05-17 Utgåva 1 Maskinsäkerhet Människans fysiska förmåga Del 3: Rekommenderade kraftgränser vid maskinanvändning Safety of machinery Human physical performance

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 13300:2001 Paints and varnishes - Water-borne coating materials and coating systems for interior walls and ceilings - Classification Paints and varnishes - Water-borne coating materials

More information

Munkaanyag

Munkaanyag TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16555-6 December 2014 ICS 03.100.40; 03.100.50 English Version Innovation management - Part 6: Creativity management Management

More information

http://www.sis.se http://www.sis.se http://www.sis.se http://www.sis.se http://www.sis.se Provläsningsexemplar / Preview SVENSK STANDARD SS-EN 14411:2007 Fastställd 2007-01-04 Utgåva 2 Keramiska plattor

More information

Provläsningsexemplar / Preview

Provläsningsexemplar / Preview SVENSK STANDARD SS-EN ISO 15156-1 Fastställd 2002-01-11 Utgåva 1 Petroleum- och naturgasindustri Material för användning i miljöer innehållande H 2 S i olje- och gasproduktion Del 1: Allmänna riktlinjer

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN 622-5:2006 Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) EESTI

More information

SVENSK STANDARD SS-ISO 2559:2004

SVENSK STANDARD SS-ISO 2559:2004 SVENSK STANDARD SS-ISO 2559:2004 Fastställd 2004-10-15 Utgåva 1 Glasfiberprodukter Stapelglasmattor och filamentglasmattor Märkning och underlag för specifikationer (ISO 2559:2000, IDT) Textile glass Mats

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 14579:2002 Hexalobular socket head cap screws Hexalobular socket head cap screws EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN

More information

System för fjärrkommunikation med debiteringsmätare Del 2: Fysiskt lager och datalänklager

System för fjärrkommunikation med debiteringsmätare Del 2: Fysiskt lager och datalänklager SVENSK STANDARD SS-EN 13757-2:2004 Fastställd 2004-12-30 Utgåva 1 System för fjärrkommunikation med debiteringsmätare Del 2: Fysiskt lager och datalänklager Communication systems for and remote reading

More information

IS INTERNATIONAL STANDARD. Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position

IS INTERNATIONAL STANDARD. Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position INTERNATIONAL STANDARD IS0 13920 First edition 1996-08-o 1 Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position Soudage - Tolkrances g&wales relatives

More information