TL494 PULSE-WIDTH-MODULATION CONTROL CIRCUITS

Size: px

Start display at page:

Download "TL494 PULSE-WIDTH-MODULATION CONTROL CIRCUITS"

Erica Dean
5 years ago
Views:

1 FEATURES Complete PWM Power-Control Circuitry Uncommitted Outputs for 200-mA Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either Output Variable Dead Time Provides Control Over Total Range Internal Regulator Provides a Stable 5-V Reference Supply With 5% Tolerance Circuit Architecture Allows Easy Synchronization TL494 PULSE-WIDTH-MODULATION CONTROL CIRCUITS SLVS074E JANUARY 1983 REVISED FEBRUARY 2005 D, DB, N, NS, OR PW PACKAGE (TOP VIEW) 1IN+ 1IN FEEDBACK DTC CT RT GND C IN+ 2IN REF OUTPUT CTRL V CC C2 E2 E1 DESCRIPTION The TL494 incorporates all the functions required in the construction of a pulse-width-modulation (PWM) control circuit on a single chip. Designed primarily for power-supply control, this device offers the flexibility to tailor the power-supply control circuitry to a specific application. The TL494 contains two error amplifiers, an on-chip adjustable oscillator, a dead-time control (DTC) comparator, a pulse-steering control flip-flop, a 5-V, 5%-precision regulator, and output-control circuits. The error amplifiers exhibit a common-mode voltage range from 0.3 V to V CC 2 V. The dead-time control comparator has a fixed offset that provides approximately 5% dead time. The on-chip oscillator can be bypassed by terminating RT to the reference output and providing a sawtooth input to CT, or it can drive the common circuits in synchronous multiple-rail power supplies. The uncommitted output transistors provide either common-emitter or emitter-follower output capability. The TL494 provides for push-pull or single-ended output operation, which can be selected through the output-control function. The architecture of this device prohibits the possibility of either output being pulsed twice during push-pull operation. The TL494C is characterized for operation from 0 C to 70 C. The TL494I is characterized for operation from 40 C to 85 C. AVAILABLE OPTIONS PACKAGED DEVICES (1) T SHRINK SMALL THIN SHRINK A SMALL OUTLINE PLASTIC DIP SMALL OUTLINE OUTLINE SMALL OUTLINE (D) (N) (NS) (DB) (PW) 0 C to 70 C TL494CD TL494CN TL494CNS TL494CDB TL494CPW 40 C to 85 C TL494ID TL494IN (1) The D, DB, NS, and PW packages are available taped and reeled. Add the suffix R to device type (e.g., TL494CDR). Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

2 TL494 PULSE-WIDTH-MODULATION CONTROL CIRCUITS SLVS074E JANUARY 1983 REVISED FEBRUARY 2005 FUNCTION TABLE INPUT TO OUTPUT CTRL V I = GND V I = V ref OUTPUT FUNCTION Single-ended or parallel output Normal push-pull operation FUNCTIONAL BLOCK DIAGRAM OUTPUT CTRL (see Function Table) RT CT DTC V Oscillator Dead-Time Control Comparator 1D C1 13 Q1 8 9 C1 E1 1IN+ 1IN V Error Amplifier 1 + PWM Comparator Pulse-Steering Flip-Flop Q C2 E2 2IN+ 2IN Error Amplifier 2 + Reference Regulator V CC REF 7 GND FEEDBACK ma 2

3 Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) Recommended Operating Conditions TL494 PULSE-WIDTH-MODULATION CONTROL CIRCUITS SLVS074E JANUARY 1983 REVISED FEBRUARY 2005 MIN MAX UNIT V CC Supply voltage (2) 41 V V I Amplifier input voltage V CC V V O Collector output voltage 41 V I O Collector output current 250 ma D package 73 DB package 82 θ JA Package thermal impedance (3)(4) N package 67 C/W NS package 64 PW package 108 Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds 260 C T stg Storage temperature range C (1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) All voltages are with respect to the network ground terminal. (3) Maximum power disipation is a function of T J (max), θ JA, and T A. The maximum allowable power dissipation at any allowable ambient temperatire is P D = (T J (max) T A )/θ JA. Operating at the absolute maximum T J of 150 C can affect reliability. (4) The package thermal impedance is calculated in accordance with JESD MIN MAX UNIT V CC Supply voltage 7 40 V V I Amplifier input voltage 0.3 V CC 2 V V O Collector output voltage 40 V Collector output current (each transistor) 200 ma Current into feedback terminal 0.3 ma f OSC Oscillator frequency khz C T Timing capacitor nf R T Timing resistor kω TL494C 0 70 T A Operating free-air temperature C TL494I

4 TL494 PULSE-WIDTH-MODULATION CONTROL CIRCUITS SLVS074E JANUARY 1983 REVISED FEBRUARY 2005 Electrical Characteristics over recommended operating free-air temperature range, V CC = 15 V, f = 10 khz (unless otherwise noted) Reference Section Oscillator Section C T = 0.01 µf, R T = 12 kω (see Figure 1) N (x n X) 2 n 1 N 1 Error-Amplifier Section See Figure 2 TL494C, TL494I PARAMETER TEST CONDITIONS (1) UNIT MIN TYP (2) MAX Output voltage (REF) I O = 1 ma V Input regulation V CC = 7 V to 40 V 2 25 mv Output regulation I O = 1 ma to 10 ma 1 15 mv Output voltage change with temperature T A = MIN to MAX 2 10 mv/v Short-circuit output current (3) REF = 0 V 25 ma (1) For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. (2) All typical values, except for parameter changes with temperature, are at T A = 25 C. (3) Duration of short circuit should not exceed one second. TL494C, TL494I PARAMETER TEST CONDITIONS (1) UNIT MIN TYP (2) MAX Frequency 10 khz Standard deviation of frequency (3) All values of V CC, C T, R T, and T A constant 100 Hz/kHz Frequency change with voltage V CC = 7 V to 40 V, T A = 25 C 1 Hz/kHz Frequency change with temperature (4) T A = MIN to MAX 10 Hz/kHz (1) For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. (2) All typical values, except for parameter changes with temperature, are at T A = 25 C. (3) Standard deviation is a measure of the statistical distribution about the mean as derived from the formula: (4) Temperature coefficient of timing capacitor and timing resistor are not taken into account. TL494C, TL494I PARAMETER TEST CONDITIONS UNIT MIN TYP (1) MAX Input offset voltage V O (FEEDBACK) = 2.5 V 2 10 mv Input offset current V O (FEEDBACK) = 2.5 V na Input bias current V O (FEEDBACK) = 2.5 V µa 0.3 to Common-mode input voltage range V CC = 7 V to 40 V V V CC 2 Open-loop voltage amplification V O = 3 V, V O = 0.5 V to 3.5 V, R L = 2 kω db Unity-gain bandwidth V O = 0.5 V to 3.5 V, R L = 2 kω 800 khz Common-mode rejection ratio V O = 40 V, T A = 25 C db Output sink current (FEEDBACK) V ID = 15 mv to 5 V, V (FEEDBACK) = 0.7 V ma Output source current (FEEDBACK) V ID = 15 mv to 5 V, V (FEEDBACK) = 3.5 V 2 ma (1) All typical values, except for parameter changes with temperature, are at T A = 25 C. 4

5 TL494 PULSE-WIDTH-MODULATION CONTROL CIRCUITS SLVS074E JANUARY 1983 REVISED FEBRUARY 2005 Electrical Characteristics over recommended operating free-air temperature range, V CC = 15 V, f = 10 khz (unless otherwise noted) Output Section Dead-Time Control Section See Figure 1 PWM Comparator Section See Figure 1 Total Device Switching Characteristics T A = 25 C PARAMETER TEST CONDITIONS MIN TYP (1) MAX UNIT Collector off-state current V CE = 40 V, V CC = 40 V µa Emitter off-state current V CC = V C = 40 V, V E = µa Collector-emitter saturation voltage Common emitter V E = 0, I C = 200 ma Emitter follower V O(C1 or C2) = 15 V, I E = 200 ma Output control input current V I = V ref 3.5 ma (1) All typical values, except for temperature coefficient, are at T A = 25 C. PARAMETER TEST CONDITIONS MIN TYP (1) MAX UNIT Input bias current (DEAD-TIME CTRL) V I = 0 to 5.25 V 2 10 µa V I (DEAD-TIME CTRL) = 0, C T = 0.01 µf, Maximum duty cycle, each output 45 % R T = 12 kω Input threshold voltage (DEAD-TIME CTRL) (1) All typical values, except for temperature coefficient, are at T A = 25 C. Zero duty cycle Maximum duty cycle 0 PARAMETER TEST CONDITIONS MIN TYP (1) MAX UNIT Input threshold voltage (FEEDBACK) Zero duty cyle V Input sink current (FEEDBACK) V (FEEDBACK) = 0.7 V ma (1) All typical values, except for temperature coefficient, are at T A = 25 C. PARAMETER TEST CONDITIONS MIN TYP (1) MAX UNIT Standby supply current R T = V ref, V CC = 15 V 6 10 All other inputs and outputs open V CC = 40 V 9 15 Average supply current V I (DEAD-TIME CTRL) = 2 V, See Figure ma (1) All typical values, except for temperature coefficient, are at T A = 25 C. PARAMETER TEST CONDITIONS MIN TYP (1) MAX UNIT Rise time ns Common-emitter configuration, See Figure 3 Fall time ns Rise time ns Emitter-follower configuration, See Figure 4 Fall time ns V V ma (1) All typical values, except for temperature coefficient, are at T A = 25 C. 5

6 TL494 PULSE-WIDTH-MODULATION CONTROL CIRCUITS SLVS074E JANUARY 1983 REVISED FEBRUARY 2005 PARAMETER MEASUREMENT INFORMATION V CC = 15 V Test Inputs 50 kω kω µf DTC FEEDBACK RT CT 1IN+ 1IN 2IN+ 2IN OUTPUT CTRL V CC GND 12 Error Amplifiers 7 8 C1 Output 1 E1 C2 E2 REF Ω 2 W 150 Ω 2 W Output 2 TEST CIRCUIT Voltage at C1 Voltage at C2 V CC 0 V V CC 0 V Voltage at CT DTC Threshold Voltage 0 V FEEDBACK 0.7 V Duty Cycle 0% Threshold Voltage MAX 0% VOLTAGE WAVEFORMS Figure 1. Operational Test Circuit and Waveforms 6

7 TL494 PULSE-WIDTH-MODULATION CONTROL CIRCUITS PARAMETER MEASUREMENT INFORMATION SLVS074E JANUARY 1983 REVISED FEBRUARY 2005 V I + Amplifier Under Test FEEDBACK + V ref Other Amplifier Figure 2. Amplifier Characteristics 15 V Each Output Circuit 68 Ω 2 W Output C L = 15 pf (See Note A) 90% 10% t f 10% tr 90% NOTE A: TEST CIRCUIT C L includes probe and jig capacitance. OUTPUT VOLTAGE WAVEFORM Figure 3. Common-Emitter Configuration 15 V Each Output Circuit C L = 15 pf (See Note A) 68 Ω 2 W Output 10% 90% 90% 10% t r t f TEST CIRCUIT OUTPUT VOLTAGE WAVEFORM NOTE A: C L includes probe and jig capacitance. Figure 4. Emitter-Follower Configuration 7

8 TL494 PULSE-WIDTH-MODULATION CONTROL CIRCUITS SLVS074E JANUARY 1983 REVISED FEBRUARY 2005 f Oscillator Frequency and Frequency Variation Hz 100 k 40 k 10 k 4 k 1 k TYPICAL CHARACTERISTICS OSCILLATOR FREQUENCY AND FREQUENCY VARIATION vs TIMING RESISTANCE 2% 1% C T = 1 µf 0% 0.1 µf 0.01 µf Df = 1% 10 1 k 4 k 10 k 40 k 100 k 400 k 1 M R T Timing Resistance Ω V CC = 15 V T A = 25 C µf Frequency variation ( f) is the change in oscillator frequency that occurs over the full temperature range. Figure 5. A Amplifier Voltage Amplification db AMPLIFIER VOLTAGE AMPLIFICATION vs FREQUENCY V CC = 15 V V O = 3 V T A = 25 C k 10 k 100 k 1 M f Frequency Hz Figure 6. 8

9 PACKAGE OPTION ADDENDUM 24-Jan-2013 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan TL494CD ACTIVE SOIC D Green (RoHS TL494CDE4 ACTIVE SOIC D Green (RoHS TL494CDG4 ACTIVE SOIC D Green (RoHS TL494CDR ACTIVE SOIC D Green (RoHS TL494CDRE4 ACTIVE SOIC D Green (RoHS (2) Lead/Ball Finish MSL Peak Temp (3) Op Temp ( C) CU NIPDAU Level-1-260C-UNLIM 0 to 70 TL494C CU NIPDAU Level-1-260C-UNLIM 0 to 70 TL494C CU NIPDAU Level-1-260C-UNLIM 0 to 70 TL494C CU NIPDAU Level-1-260C-UNLIM 0 to 70 TL494C CU NIPDAU Level-1-260C-UNLIM 0 to 70 TL494C TL494CDRG3 PREVIEW SOIC D 16 TBD Call TI Call TI 0 to 70 TL494C TL494CDRG4 ACTIVE SOIC D Green (RoHS TL494CJ OBSOLETE CDIP J 16 TBD Call TI Call TI TL494CN ACTIVE PDIP N Pb-Free (RoHS) TL494CNE4 ACTIVE PDIP N Pb-Free (RoHS) TL494CNSR ACTIVE SO NS Green (RoHS TL494CNSRG4 ACTIVE SO NS Green (RoHS TL494CPW ACTIVE TSSOP PW Green (RoHS TL494CPWE4 ACTIVE TSSOP PW Green (RoHS TL494CPWG4 ACTIVE TSSOP PW Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 70 TL494C CU NIPDAU N / A for Pkg Type 0 to 70 TL494CN CU NIPDAU N / A for Pkg Type 0 to 70 TL494CN CU NIPDAU Level-1-260C-UNLIM 0 to 70 TL494 CU NIPDAU Level-1-260C-UNLIM 0 to 70 TL494 CU NIPDAU Level-1-260C-UNLIM 0 to 70 T494 CU NIPDAU Level-1-260C-UNLIM 0 to 70 T494 CU NIPDAU Level-1-260C-UNLIM 0 to 70 T494 TL494CPWLE OBSOLETE TSSOP PW 16 TBD Call TI Call TI TL494CPWR ACTIVE TSSOP PW Green (RoHS TL494CPWRE4 ACTIVE TSSOP PW Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 70 T494 CU NIPDAU Level-1-260C-UNLIM 0 to 70 T494 Top-Side Markings (4) Samples Addendum-Page 1

10 PACKAGE OPTION ADDENDUM 24-Jan-2013 Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan TL494CPWRG4 ACTIVE TSSOP PW Green (RoHS TL494ID ACTIVE SOIC D Green (RoHS TL494IDE4 ACTIVE SOIC D Green (RoHS TL494IDG4 ACTIVE SOIC D Green (RoHS TL494IDR ACTIVE SOIC D Green (RoHS TL494IDRE4 ACTIVE SOIC D Green (RoHS TL494IDRG4 ACTIVE SOIC D Green (RoHS TL494IN ACTIVE PDIP N Pb-Free (RoHS) TL494INE4 ACTIVE PDIP N Pb-Free (RoHS) (2) Lead/Ball Finish MSL Peak Temp (3) Op Temp ( C) CU NIPDAU Level-1-260C-UNLIM 0 to 70 T494 CU NIPDAU Level-1-260C-UNLIM -40 to 85 TL494I CU NIPDAU Level-1-260C-UNLIM -40 to 85 TL494I CU NIPDAU Level-1-260C-UNLIM -40 to 85 TL494I CU NIPDAU Level-1-260C-UNLIM -40 to 85 TL494I CU NIPDAU Level-1-260C-UNLIM -40 to 85 TL494I CU NIPDAU Level-1-260C-UNLIM -40 to 85 TL494I CU NIPDAU N / A for Pkg Type -40 to 85 TL494IN CU NIPDAU N / A for Pkg Type -40 to 85 TL494IN TL494MJ OBSOLETE CDIP J 16 TBD Call TI Call TI -55 to 125 TL494MJB OBSOLETE CDIP J 16 TBD Call TI Call TI -55 to 125 Top-Side Markings (4) Samples (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS - please check for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS : TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) Addendum-Page 2

11 PACKAGE OPTION ADDENDUM 24-Jan-2013 (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) Only one of markings shown within the brackets will appear on the physical device. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 3

12 PACKAGE MATERIALS INFORMATION 14-Mar-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Reel Diameter (mm) Reel Width W1 (mm) A0 (mm) B0 (mm) K0 (mm) P1 (mm) W (mm) Pin1 Quadrant TL494CDR SOIC D Q1 TL494CDR SOIC D Q1 TL494CDRG4 SOIC D Q1 TL494CDRG4 SOIC D Q1 TL494CNSR SO NS Q1 TL494CPWR TSSOP PW Q1 TL494IDR SOIC D Q1 TL494IDRG4 SOIC D Q1 Pack Materials-Page 1

13 PACKAGE MATERIALS INFORMATION 14-Mar-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TL494CDR SOIC D TL494CDR SOIC D TL494CDRG4 SOIC D TL494CDRG4 SOIC D TL494CNSR SO NS TL494CPWR TSSOP PW TL494IDR SOIC D TL494IDRG4 SOIC D Pack Materials-Page 2

TL494 PULSE-WIDTH-MODULATION CONTROL CIRCUITS

TL494 PULSE-WIDTH-MODULATION CONTROL CIRCUITS www.ti.com FEATURES Complete PWM Power-Control Circuitry Uncommitted Outputs for 200-mA Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double