Fluke 1650 Series. Multifunction Installation Testers. Extended Specifi cations. The installation testing solution for demanding environments
|
|
- Maude Rose
- 5 years ago
- Views:
Transcription
1 Fluke 1650 Series Multifunction Installation Testers Extended Specifi cations The installation testing solution for demanding environments The Fluke 1650 Series testers, with new advanced features, are the perfect installation testing tool for verifying the safety of electrical installations in domestic, commercial, and industrial applications. Ensure that fi xed wiring is correctly installed and compliant with IEC 60364, HD 384 requirements, and all relevant local standards. The 1650 Series is effi cient to use by allowing the user to measure loop impedance without tripping RCD s, eliminating the need to bypass them. Slim reach probes allow you to keep your eyes on the panel while probing hard to reach areas. With easy-to-operate controls, a large display with a wide viewing angle, padded neck strap, and a compact, ergonomic design, these testers are comfortable enough to use for all day testing. 1654B 1652C 1653B
2 Features by Model Measurement Function 1652C 1653B 1654B Other Features Memory, Interface Included Accessories Specifications General Specifications Specification Characteristic
3 Electrical Measurement Specifications Insulation Resistance (R ISO 50 V 100 V 250 V 500 V 1000 V Display Display Display Display Display
4 Continuity (R LO Display Loop Tests (Z I Loop Z I Hi Current Loop Z I No Trip Loop Z I Loop R E Display Display Display Display
5 RCD/FI Tests ( T, I N RCD/FI Time RCD/FI Current Display Display Earth Tests (R E Display
6 AC Voltage Measurement (V Accuracy Overload Range Resolution Input Impedance 50Hz - 60Hz Protection Continuity Testing (R LO Range (Autoranging Resolution Open Circuit Voltage Accuracy Range R LO Test Current Test Probe Zeroing Live Circuit Detection. Insulation Resistance Measurement (R ISO Model 1652C Test Voltages Model 1653B & 1654B Accuracy of Test Voltage (at rated test current Test Voltage Insulation Resistance Range Resolution Test Current Accuracy Auto Discharge Live Circuit Detection Capacitive Load:
7 Loop and Line Impedance (Z I No Trip and Hi Current Modes RCD/FI Mains Input Voltage Range Input Connection (soft key selection Limit on Consecutive Tests Test 400 V Test 230 V Range Resolution Accuracy* Prospective Earth Fault Current Test (PSC/I K Computation Range Resolution and Units Resolution Units Accuracy RCD Testing RCD Types Tested G Test Signals
8 Tripping Speed Test (T Current Settings 1 Multiplier Current Accuracy Current Multiplier *RCD Type Measurement Range Europe UK Trip Time Accuracy Trip Time RCD I N Trip Time Limits RCD/FI-Tripping Current Measurement/Ramp Test (I N Current Range Step Size Dwell Time Measurement Type G Type S Accuracy Specified trip current ranges (EN : Earth Resistance Test (R E Range Resolution Accuracy 1 Range: R E + R PROBE Frequency Live Circuit Detection Test Current Output Voltage
9 Phase Sequence Indication Icon Display of Phase Sequence Mains Input Voltage Range (phase-tophase Mains Wiring Test Operating Ranges and Uncertainties per EN Function Display Range EN Measurement Range Operating Uncertainty I I I I I Nominal s I I I
10 Operating Uncertainties per EN he Operating Uncertainty shows the maximum possible uncertainty when all influence factors E1-E10 are counted. Volts RLo EN RISO EN Z I EN T EN IN EN RE EN Influence Quantity Volts RLo EN RISO EN Z I EN T EN IN EN RE EN Ordering information 1654B 1653B 1652C Included with 1650: Optional accessories Fluke. Keeping your world up and running. Fluke Corporation Fluke Europe B.V. For more information call: Fluke (UK Ltd.
The future of installation testing is here. The Fluke 1650 Series Multifunction Testers
The future of installation testing is here The Fluke 50 Series Multifunction Testers Fluke 50 Series Safer, easier installation testing. The 50 Series testers verify the safety of electrical installations
More informationThe future of installation testing is here. The 1650 Series Multifunction Testers
The future of installation testing is here The 50 Series Multifunction Testers 50 Series Safer, easier installation testing. Robin and Fluke joined forces in 999 to become the largest supplier of hand-held
More informationFluke 1660 Series Multifunction Installation Testers
TECHNICAL DATA Fluke 1660 Series Multifunction Installation Testers Reduce test time up to 40 % with Auto Test Auto Test does 5 required installation tests in one sequence, including selectable Type A,
More information1650 Series Multifunction Installation Testers
1650 Series Multifunction Installation Testers New RCD Type B Compatibility Extra functionality, faster testing, and as rugged as ever Fluke 1654B Fluke 1653B Fluke 1652C Safer, easier installation testing.
More informationFluke 1660 Series Multifunction Installation Testers
TECHNICAL DATA Fluke 1660 Series Multifunction Installation Testers Reduce test time up to 40 % with Auto Test Auto Test does 5 required installation tests in one sequence, including selectable Type A,
More information1650 Series Multifunction Installation Testers
1650 Series Multifunction Installation Testers Fluke 1654B Fluke 1653B Fluke 1652C BS7671 17th Edition IEE Wiring Regulations IEC 60364.6.61, HD 384 6 AA Cell batteries C1600 Hard carrying case Zero Adapter
More informationMultifunction Installation Tester
Multifunction Installation Tester ProInstall-75 User Manual Multifunction Installation Tester ProInstall-75 User Manual English 1/2017, Rev A 2017 Beha-Amprobe. All rights reserved. Limited Warranty and
More information1651B. Users Manual. Electrical Installation Tester
1651B Electrical Installation Tester Users Manual May 2011 2011 Fluke Corporation. All rights reserved. Specifications are subject to change without notice. All product names are trademarks of their respective
More information1507/1503. Insulation Testers. Technical Data. Features and benefits:
1507/1503 Insulation Testers Technical Data The Fluke 1507 and 1503 Insulation Testers are compact, rugged, reliable, and easy to use. With their multiple test voltages, they are ideal for many troubleshooting,
More information1662/1663/1664 FC. Calibration Manual. Electrical Installation Tester
662/663/664 FC Electrical Instation Tester Calibration Manual October 206 206 Fluke Corporation. All rights reserved. Specifications are subject to change without notice. All product names are trademarks
More information5320A. Multifunction Electrical Tester Calibrator. Extended Specifications
5320A Multifunction Electrical Tester Calibrator Extended Specifications General Specifications Warm-Up Time...30 minutes Specifications Confidence Level...99 % Specifications Interval...1 year Temperature
More informationFluke 1660 Series Multifunction Installation Testers
TECHNICAL DATA Fluke 1660 Series Multifunction Installation Testers Reduce test time up to 40 % with Auto Test Auto Test does 5 required installation tests in one sequence, including selectable Type A,
More information165XB. Electrical Installation Tester. Users Manual
165XB Electrical Installation Tester Users Manual April 2008, Rev.1, 10/09 2008, 2009 Fluke Corporation. All rights reserved. Specifications are subject to change without notice. All product names are
More informationHT FAMILY 2000 METERS. Integrated meter for test verifies on electrical installations
HT FAMILY 2000 METERS Integrated meter for test verifies on electrical installations DESCRIPTION ISOTEST200 model performs Insulation Resistance measurements on each electrical installation with test voltage
More informationreturned to your distributor for attention. 14. Do not operate the function switch while the instrument is connected to a circuit.
1. This instrument must only be used by a competent and trained person and operated in strict accordance with the instructions. KYORITSU will not accept liability for any damage or injury caused by misuse
More informationGSC57 Rel of 257/10/05
Integrated meter for test verify and Power Quality analysis Pag 1 of 7 1. ELECTRICAL SPECIFICATIONS VERIFY TESTS Accuracy is indicated as ± (% readings + no. of digits) at 23 C ± 5 C, con relative humidity
More informationInstallation Tester and DMM Kits
Installation Tester and DMM Kits Kit Contents: Part Number FLUKE-1652C-CLAMPKIT FLUKE-1652C05-CLAMPKIT FLUKE-1653B-CLAMPKIT/D FLUKE-1653B02-CLAMPKIT/D FLUKE-1654B-CLAMPKIT/D FLUKE-1654B02-CLAMPKIT/D FLUKE-117/TL175/SB
More information5320A Multifunction Electrical Tester Calibrator. Verify and calibrate electrical test tools with a single instrument
5320A Multifunction Electrical Tester Calibrator Verify and calibrate electrical test tools with a single instrument 5320A Multifunction Electrical Tester Calibrator: Wide workload coverage with a single
More informationINSTRUCTION MANUAL DIGITAL PSC-LOOP TESTER MODEL 4118A KYORITSU ELECTRICAL INSTRUMENTS WORKS,LTD.
INSTRUCTION MANUAL DIGITAL PSC-LOOP TESTER MODEL 4118A KYORITSU ELECTRICAL INSTRUMENTS WORKS,LTD. CONTENTS 1. SAFE TESTING... 1 2. PROCEDURE OF REMOVING COVER... 4 3. FEATURES... 5 3.1 Instrument Layout...
More informationThe first installation safety tester with automated testing based on patent pending AUTO SEQUENCE.
EurotestAT MI 3101 The first installation safety tester with automated testing based on patent pending AUT SEQUENCE. Concentrate on your work instead on the instruction manual of your test instrument.
More informationFluke T5 Electrical Testers. Fluke T and T5-600 Voltage, Continuity and Current Testers
Fluke T5 Fluke T5-1000 and T5-600 Voltage, Continuity and Current Testers Excellent front-line troubleshooting and measurement tool Available in 600 V and 1000 V models OpenJaw current measurement Rotary
More information1587/1577 Insulation Multimeters
1587/1577 Insulation Multimeters Technical Data Two powerful tools in one. The Fluke 1587 and 1577 Insulation Multimeters combine a digital insulation tester with a full-featured, true-rms digital multimeter
More informationInsulation Testers and Earth Ground Testers
Insulation Testers and Earth Ground Testers With a 5000 V MegOhmMeter for industrial-strength insulation testing and a range of compact hand-held instruments, we offer a solution for every troubleshooting
More informationEurotest 61557, Instaltest 61557
, Instaltest 61557, Instaltest 61557 Ultimate Instruments for Complete Testing of Electrical Installations Testing Measuring Analysing Recording No. 118740 VDE 0100 BS 7671 CEI 64.8 HD 384 EN 61557 VDE
More informationPROFiTEST C Test Instrument per DIN VDE /8.14
3-349-075-03 16/8.14 Testing of Residual-Current Devices (RCDs) Measures contact voltage without tripping the RCCB. Contact voltage relative to nominal residual current is measured with 1 / 3 nominal residual
More information165XB. Electrical Installation Tester. Users Manual
165XB Electrical Installation Tester Users Manual April 2008 2008 Fluke Corporation. All rights reserved. Specifications are subject to change without notice. All product names are trademarks of their
More informationINSTRUCTION MANUAL MULTI-FUNCTION TESTER KEW 6016
INSTRUCTION MANUAL MULTI-FUNCTION TESTER KEW 6016 CONTENTS 1. Safe Testing... 1 2. Instruments Layout... 3 3. Accessories... 5 4. Features... 6 5. Specification... 8 5.1 Measurement Specification... 8
More information165X. Users Manual. Electrical Installation Tester
165X Electrical Installation Tester Users Manual September 2003 2003 Fluke Corporation, All rights reserved. Printed in USA All product names are trademarks of their respective companies. LIMITED WARRANTY
More informationDM-III MULTITEST Power Quality Recorder
DM-III MULTITEST Power Quality Recorder Amprobe s full-featured Three-Phase Power Quality Recorders provide the essential functions and capabilities required to operate accurately and effectively in today
More informationInstallation Tester BENNING IT 115. Operating Manual
Installation Tester BENNING IT 115 Operating Manual Manufacturer: BENNING Elektrotechnik und Elektronik GmbH & Co. KG Münsterstraße 135-137 D - 46397 Bocholt Phone: +49 (0) 2871-93 - 0 Fax: +49 (0) 2871-93
More informationHT COMBI419. Innovative meter designed to perform all safety test
HT COMBI419 Innovative meter designed to perform all safety test Description COMBI419 and COMBI420 is an innovative meter designed to perform all safety test verifies on electrical installations in compliance
More informationEurotestEASI MI 3100 SE MI 3100 s Instruction manual Version 1.1, Code no
EurotestEASI MI 3100 SE MI 3100 s Instruction manual Version 1.1, Code no. 20 752 131 Distributor: Manufacturer: METREL d.d. Ljubljanska cesta 77 1354 Horjul Slovenia web site: http://www.metrel.si e-mail:
More informationPROFiTEST C Test Instrument per DIN VDE /11.10
3-349-075-03 15/11.10 Testing of Residual-Current Devices (RCDs) Measures contact voltage without tripping the RCCB. Contact voltage relative to nominal residual current is measured with 1 / 3 nominal
More informationOperating manual Installation Tester BENNING IT 110 / BENNING IT 120 B
Operating manual Installation Tester BENNING IT 110 / BENNING IT 120 B 1 Preface...5 2 Safety and operational considerations...6 2.1 Warnings and notes...6 2.2 Batteries...8 2.3 Charging...9 2.4 Precautions
More informationElectrical Multimeter
113 Electrical Multimeter Instruction Sheet Safety Information A Warning statement identifies hazardous conditions and actions that could cause bodily harm or death. A Caution statement identifies conditions
More informationEurotestXE MI 3102H BT, MI 3102 BT Instruction manual Version 1.0, Code no
EurotestXE MI 3102H BT, MI 3102 BT Instruction manual Version 1.0, Code no. 20 752 160 Distributor: Manufacturer: METREL d.d. Ljubljanska cesta 77 1354 Horjul Slovenia web site: http://www.metrel.si e-mail:
More informationMETREL Measuring and Regulation Equipment
METREL Measuring and Regulation Equipment ELECTRICAL INSTALLATION SAFETY MI 3108 EurotestPV MI 2230 VAFMeter MACHINES/APPLIANCES/SWITCHGEAR SAFETY A 1322 Active 3-phase Adapter MI 3310 SigmaGT HIGH VOLTAGE
More informationFluke and
Fluke 1623-2 and 1625-2 GEO Earth Ground Testers Technical Data The new Fluke 1623-2 and 1625-2 GEO Earth Ground Testers offer data storage and download capabilities via USB port. World class accessories
More informationFluke 345. Power Quality Clamp Meter. The ideal meter for commissioning and troubleshooting modern electrical loads
Fluke 345 Power Quality Clamp Meter Technical Data The ideal meter for commissioning and troubleshooting modern electrical loads With a bright color display to analyze the harmonic spectrum, a low-pass
More informationwww.socketandsee.co.uk 200602 Put us to the Test! Socket & See are committed to providing the easiest to use testers on the market. All our testers are guaranteed against manufacturing defect for two years
More information165X. Users Manual. Electrical Installation Tester
165X Electrical Installation Tester Users Manual September 2003 Rev. 1, 6/04 2003, 2004 Fluke Corporation, All rights reserved. All product names are trademarks of their respective companies. LIMITED WARRANTY
More informationFamily 400 meters Rel /04/2007
COMBI49 COMBI420 ISO40 SPEED48 Pag - 6. MAIN FEATURES OF FAMILY 400 METERS Help on line (available on each function) to support the user while connecting the instrument to the installation under measurement
More information1587/1577. Insulation Multimeters. Technical Data. Two powerful tools in one.
Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com 1587/1577 Insulation Multimeters Technical Data Two powerful tools in one. The Fluke 1587 and 1577 Insulation
More informationC.A 6115N. Safety at all costs. IEE 16th: Electrical installation IEC/EN I E C. Insulation RCD. Earth. Loop. Continuity.
IEE 16th: Safety at all costs C.A 6115N Electrical installation Insulation RCD Earth Loop Continuity Phase rotation I E C CONFIRMS TO CONFIRMS TO IEC/EN 61557 1010-1 III 300V Cat Cat The most complete
More informationTesters: / Ohmmeters Insulation Measuring Instruments. n Compact and rugged for service calls and laboratory use. Scope of delivery:
Table of Contents Testers: / Ohmmeters Insulation Measuring Instruments 51 METRAOHM 413 Article: M630A Digital Low-Resistance Measuring Instrument for Measuring Protective Conductors, Equipotential Bonding
More information# Digital Multimeter
#61-797 Digital Multimeter - 1 - TABLE OF CONTENTS 1.Introduction Precautions and Safety Information Symbols Safety 2.Specifications General Specifications Electrical Specifications Required Equipment
More informationInstallation Tester BENNING IT 130. Operating Manual
Installation Tester BENNING IT 130 Operating Manual Manufacturer: BENNING Elektrotechnik und Elektronik GmbH & Co. KG Münsterstraße 135-137 D - 46397 Bocholt Phone: +49 (0) 2871-93 - 0 Fax: +49 (0) 2871-93
More informationThe KT 64 incorporates Anti Trip Technology (ATT) which electronically bypasses RCDs when performing loop impedance tests. This saves time and money
Contents 1. Safe Testing...... 1 2. Instruments Layout...... 3 3. Accessories.. 4 4. Features. 4 5. Specification.. 6 5.1 Measurement Specification.. 6 5.2 Operating error.... 9 5.3 General Specification.....
More informationFluke 1623 and GEO Earth Ground Testers. Technical Data. Stakeless testing
Fluke 1623 and 1625 GEO Earth Ground Testers Technical Data The new Fluke 1623 and 1625 GEO Earth Ground Testers offer an innovative solution, called Stakeless testing, to make your earth ground loop resistance
More informationQUICK SETUP GUIDE SECULIFE IP
QUICK SETUP GUIDE SECULIFE IP The SECULIFE IP is capable of executing all measurements for testing the effectiveness of safety measures in electrical systems as required by IEC 60364-4 / VDE 0100-600,
More informationFluke 1587 FC/1577 Insulation Multimeters
TECHNICAL DATA Fluke 587 FC/577 Insulation Multimeters The High-Performance 2-in- Insulation DMM The Fluke 587 FC and 577 Insulation Multimeters combine a digital insulation tester with a full-featured,
More informationMFT1800 Series. Multifunction testers. User Manual
MFT1800 Series Multifunction testers User Manual Contents X.1 SAFETY WARNINGS... 4 1. Introduction... 5 2. Overview... 6 2.1 Front panel and controls 6 2.2 Waste electrical and electronic equipment 9 2.3
More information5322A Electrical Safety Tester Calibrator
TECHNICAL DATA 5322A Electrical Safety Tester Calibrator Calibrate to international standards UK 17th Edition BS 7671 17th Edition - Requirements for Electrical Installations, IET Wiring Regulations The
More informationGOSSEN METRAWATT. Testers
Testers 45 Testers Protective measures in electrical systems are intended to prevent bodily injury due to accidents involving electrical current. Of course they also prevent property damage caused by electrical
More informationElectrical Multimeter
113 Electrical Multimeter Instruction Sheet Safety Information A Warning statement identifies hazardous conditions and actions that could cause bodily harm or death. A Caution statement identifies conditions
More information1662/1663/1664 FC. Users Manual. Electrical Installation Tester. 99 Washington Street Melrose, MA TestEquipmentDepot.
99 Washington Street Melrose, MA 02176 800.517.8431 TestEquipmentDepot.com 1662/1663/1664 FC Electrical Installation Tester Users Manual October 2015, Rev. 1, 4/16 20152016 Fluke Corporation. All rights
More informationElectrical Catalog. Fluke. Keeping your world up and running.
Digital Multimeters Clamp Meters Electrical Testers Insulation Testers Earth Ground Testers Installation Testers Portable Appliance Testers Indoor Air Quality Tools Digital Thermometers Thermal Imagers
More informationMFT1800 series. Multifunction testers. User manual
M MFT1800 series Multifunction testers User manual 1 Contents X.1 SAFETY WARNINGS 4 1. Introduction 5 2. Overview 6 2.1 Front panel and controls 6 2.2 Waste electrical and electronic equipment 9 2.3 Battery
More information400Amp True RMS AC Clamp Meter + NCV
User Guide 400Amp True RMS AC Clamp Meter + NCV Model MA410T Introduction Thank you for selecting the Extech MA410 Clamp Meter. This meter measures AC Current, AC/DC Voltage, Resistance, Capacitance, Frequency,
More information1507/1503. Insulation Testers. Users Manual
1507/1503 Insulation Testers 1507/1503 Insulation Testers Introduction The Fluke model 1507 and model 1503 are battery-powered insulation testers (hereafter, "the Tester"). Although this manual describes
More informationHT FAMILY 400 METERS. Innovative meter designed to perform all safety test and power measurements on single phase system
HT FAMILY 400 METERS Innovative meter designed to perform all safety test and power measurements on single phase system Description ISO410 Insulation / Continuity meter with remote probe GEO416 Professional
More informationHT FAMILY 400 METERS. Innovative meter designed to perform all safety test and power measurements on single phase system
HT FAMILY 400 METERS Innovative meter designed to perform all safety test and power measurements on single phase system Description COMBI419 and COMBI420 is an innovative meter designed to perform all
More informationIndeks: WMXXCMM60 Advanced Industrial Multimeter
CMM-60 Indeks: WMXXCMM60 Advanced Industrial Multimeter Description The CMM-60 multimeter allows you to record data thanks to the Trend Capture function of the built-in memory as well as the possibility
More informationGSC57 & GSC53N. Integrated meter for test verify and Power Quality analysis
GSC57 & GSC53N Integrated meter for test verify and Power Quality analysis DESCRIPTION GSC57 is the most complete model of the entire meters designed to verifies both on electrical installations according
More informationSUBJECT TO CHANGE WITHOUT NOTICE
www.sifamtinsley.co.uk DATASHEET Multifunction Meters Transducers & Isolators Temperature Controllers Converters & Recorders Digital Panel Meters ijunior / JUNIOR Current Transformers Analogue Panel Meters
More informationDM-III Multitest & DM-III Multitest F Power Quality Recorders
DM-III Multitest & DM-III Multitest F Power Quality Recorders CAT 600V TRUE RMSz Amprobe s full-featured Three-Phase Power Quality Recorders provide the essential functions and capabilities required to
More informationMEGGER CM300 MK II, CM400 MK II & CM500
MEGGER CM300 MK II, CM400 MK II & CM500 Multi-Function Installation Testers User Guide MEGGER Contents Safety Warnings 3 Initial Setup 4 General Description 6 Features, Controls and Connections 8 Operation
More informationMIT400/2. CAT IV Insulation testers MIT430/2: CAT IV Insulation testers
MIT400/2 Designed for electrical and industrial testing Insulation testing up to 1000 V and 200 GΩ range Stabilized insulation test voltage (New) Single range, faster continuity testing from 0.01 Ω to
More informationMIT400/2 CAT IV Insulation testers
MIT400/2 CAT IV Insulation testers MIT400/2 CAT IV Insulation testers Designed for Electrical and Industrial testing Insulation testing up to 1000 V and 200 GΩ range Stabilised insulation test voltage
More informationMulti-Function Installation Tester MEGGER CM500. User Guide MEGGER
Multi-Function Installation Tester MEGGER CM500 User Guide MEGGER Contents Safety Warnings 3 Initial Setup 4 General Description 6 Features, Controls and Connections 8 Operation 10 Backlight 10 Auto shut-off
More informationMIT415 Insulation tester
MIT415 Insulation tester General features o 10V & 100V ESD testing o 25V, 50V, 250V & 500V additional ranges o Insulation testing up to 50Gohms (500V) o Continuity testing at 200mA or 20mA from 0.01ohms
More informationMFT1700 series. Multifunction testers. User manual
M MFT1700 series Multifunction testers User manual 1 Contents SAFETY WARNINGS...3 1. Introduction...4 2. Overview...4 2.1 Front panel and controls...6 2.2 Waste electrical and electronic equipment...6
More informationAgilent U1231A/U1232A/U1233A Handheld Multimeter. Quick Start Guide
Agilent U3A/U3A/U33A Handheld Multimeter Quick Start Guide Verify that you received the following items in the shipment of your multimeter: One pair of red and black test leads Four.5 V AAA alkaline battery
More informationBMM80 Premium Insulation Multimeters
Insulation measurement to 200 GΩ 200 ma Short Circuit Current output mv Transducer inputs Test lead/transducer null facility Backlight Remote control switched probe included Capacitance Measurement to
More informationGAMMA 10 DIGITAL MULTIMETER
Gamma 10 www.sifamtinsley.co.uk DATASHEET Issue 1.0 Multifunction Meters Transducers & Isolators Temperature Controllers Converters & Recorders Digital Panel Meters Current Transformers Analogue Panel
More informationFluke Clamp Meters Solutions for every need
Fluke Clamp Meters Solutions for every need 381 355 773 more solutions inside Clamp Meter selection chart Job functions Applications Recommended clamp Process Technician/ Automation Specialist Multiple
More informationNEO TELE-TRONIX PVT. LTD. 6/7 Bijoygarh, Kolkata , Tel : ; Fax :
NEO TELE-TRONIX PVT. LTD. 6/7 Bijoygarh, Kolkata - 700 032, Tel : 033 2477 3126; Fax : 033 2477 2403 www.ntplindia.com SPECIFICATION NTPL MAKE MICRO-CONTROLLER BASED AUTOMATIC 50KV/10A AC HIGH VOLTAGE
More informationOscilloscope Calibration Options for Fluke 5500A/5520A Multi-Product Calibrators Extended Specifications
Oscilloscope Calibration Options for Fluke 5500A/5520A Multi-Product Calibrators Extended Specifications These specifications apply to the 5520A-SC1100, 5500A-SC600 and 5500A-SC300 Oscilloscope Calibration
More informationKeysight U1231A/ U1232A/U1233A Handheld Multimeter. Quick Start Guide
Keysight UA/ UA/UA Handheld Multimeter Quick Start Guide Contacting Keysight www.keysight.com/find/assist (worldwide contact information for repair and service) Safety and EMC Information This meter is
More informationT+ and T+ PRO Electrical Tester
T+ and T+ PRO Electrical Tester Instruction Sheet Introduction The Fluke T+ and T+ PRO Electrical Testers (the Tester ) have the following features: AC and dc voltage measurement, 12 V to 600 V, with or
More informationOPERATING MANUAL METER FOR ELECTRICAL INSTALLATION PARAMETERS MPI-505
OPERATING MANUAL METER FOR ELECTRICAL INSTALLATION PARAMETERS MPI-505 SONEL SA ul. Wokulskiego 11 58-100 Świdnica Version 1.04 22.01.2016 The MPI-505 meter is a modern, easy and safe measuring device.
More informationPV200. Why buy the PV200? The most compact I-V curve tracer around.
The PV200 is a compact & cost effective I-V curve tracer that uses simple push button operation making it an efficient and versatile tester for PV systems. 999 datasets can be stored on the instrument
More information8000 SERIES PRECISION MULTIMETER VERIFICATION AND ADJUSTMENT GUIDE
8000 SERIES PRECISION MULTIMETER VERIFICATION AND ADJUSTMENT GUIDE TRANSMILLE LTD. Version 1.1 : Apr 2015 TABLE OF CONTENTS PREPARING FOR CALIBRATION... 4 INTRODUCTION... 4 CALIBRATION INTERVAL SELECTION...
More informationMIT400 CAT IV Industrial Insulation Testers
MIT400 CAT IV MIT400 CAT IV CAT IV 600 V applications TRMS & DC Voltage measurement Insulation testing up to 1000 V and 200 GΩ Continuity testing at 200 ma or 20 ma down to 0.01 Ω Pass/Fail limit alarms
More informationEurotestCOMBO MI 3125 / MI 3125E Short instructions Version 2.2, Code no
EurotestCOMBO MI 3125 / MI 3125E Short instructions Version 2.2, Code no. 20 751 519 Distributor: Manufacturer: METREL d.d. Ljubljanska cesta 77 1354 Horjul Slovenia web site: http://www.metrel.si e-mail:
More information79/26 Series III Multimeter
79/26 Series III Multimeter Instruction Sheet W Read First: Safety Information Never use the meter if the meter or test leads look damaged. Be sure the test leads and switch are in the correct position
More informationMIT400 CAT IV Industrial Insulation Testers
MIT400 CAT IV MIT400 CAT IV CAT IV 600 V applications TRMS & DC Voltage measurement Insulation testing up to 1000 V and 200 GΩ Continuity testing at 200 ma or 20 ma down to 0.01 Ω Pass/Fail limit alarms
More informationGAMMA 12 DIGITAL MULTIMETER
Gamma 12 www.sifamtinsley.co.uk DATASHEET Issue 1.0 Multifunction Meters Transducers & Isolators Temperature Controllers Converters & Recorders Digital Panel Meters Current Transformers Analogue Panel
More informationET 61 - Electrician Theory Examination Marking Schedule
ET 61 - Electrician Theory Examination Marking Schedule Notes:1. means that the preceding statement/answer earns 1 mark. 2. This schedule sets out the accepted answers to the examination questions. A marker
More informationFluke 370 FC Series True-rms Wireless AC/DC Clamp Meters
TECHNICAL DATA Fluke 370 FC Series True-rms Wireless AC/DC Clamp Meters The new Fluke 370 FC Series (376 FC, 375 FC and 374 FC) offers advanced troubleshooting performance. The iflex flexible current allows
More informationMIT480/2 Insulation testers
MIT480/2 Insulation testers MIT480/2 Insulation testers Insulation testing up to 500 V and 100 GΩ range in a hand held instrument 3 wire connection for A, B and E (Tip, Ring and Earth) connection (New)
More informationElectrical safety testers
Electrical safety testers ISO 9001 Certified Dielectric strength tester from 0 to 5 kvac and 0 to 6 kvdc (SXS56, SXS506 models) Insulation resistance from 50 kω up to 200 GΩ (2 TΩ option) Ground continuity
More informationC&G Level 3 Award in the Periodic Inspection, Testing and Certification of Electrical Installations
C&G 2395-01 Level 3 Award in the Periodic Inspection, Testing and Certification of Electrical Installations Phase rotation and verification of voltage drop 1 Outcomes of this Session describe how to assess
More informationINSULATION TESTER SERIES
INSULATION TESTER SERIES Field measuring instruments A Full Line-up of Insulation Testers to Suit Any Need From Basic Testing to High Performance Analysis 2 INSULATION TESTER SERIES Selection guide IR4056-20
More informationMARTINDALE INSTRUCTIONS. E-ZeTest EZ2500 LOOP TESTER ELECTRIC. Trusted by professionals. Other products from Martindale:
Other products from Martindale: 17th Edition Testers All-in-one s Calibration Equipment Continuity Testers Electrician s kits Full Calibration & Repair Service Fuse Finders Digital Clamp Meters Digital
More informationELECTRICIAN S THEORY EXAMINATION 15 November 2014 QUESTION AND ANSWER BOOKLET
Candidate Code No. ET51 For Board Use Only Result Date Int Result Date Int ELECTRICIAN S THEORY EXAMINATION 15 November 2014 QUESTION AND ANSWER BOOKLET INSTRUCTIONS READ CAREFULLY Time Allowed: Three
More informationMeasure voltage without test leads. Product Highlights
Measure voltage without test leads Measure voltage up to 1000 V ac through the open fork, without test lead contact to live voltage. + Without opening covers or removing wire nuts. On wires up to AWG 4/0
More informationTestboy TV 416/432(A) CEE adapter*
Testboy TV 416/432(A) CEE adapter* The Testboy TV 416/432(A) is a compact CEE adapter, comprising of a combination of CEE plug (16 A or 32 A), shockproof socket and self-closing flap cover, as well as
More informationPV210. Why buy the PV210?
The PV210 is a compact & cost effective I-V curve tracer that utilizes NFC technology, eliminating the need for a laptop on site. I-V curve tracing is made fast with simple push button operation; making
More informationMETRATESTER 5+ Tester for DIN VDE /6.15
3-348-817-03 15/6.15 Applications Electrical safety testing of electrical equipment: per DIN VDE 0701-0702: 2008 by means of measurement of: Protective conductor resistance Insulation resistance Protective
More information