1800PT Series. Phase Control Thyristors (Hockey PUK Version), 1800A FEATURES TYPICAL APPLICATIONS. RoHS. Nell High Power Products.

Size: px
Start display at page:

Download "1800PT Series. Phase Control Thyristors (Hockey PUK Version), 1800A FEATURES TYPICAL APPLICATIONS. RoHS. Nell High Power Products."

Transcription

1 Phase Control Thyristors (Hockey PUK ersion), 18 18PT Series FETURES Center amplifying gate Metal case with ceramic insulator lnternational standard case -24 (K-PUK) Nell s D-type Capsule Compliant to Designed and qualified for industrial level TYPICL PPLICTIONS DC motor controls Controlled DC power supplies C controllers -24 (K-PUK) (Nell s D-type Capsule) PRODUCT SUMMRY I T() 18 MOR RTINGS ND CHRCTERISTICS PRMETER I T() I T(RMS) I TSM 2 I t DRM/RRM T T hs HZ 6 HZ HZ 6 HZ TEST CONDITIONS Double side cooled, single phase, Hz, half-sine wave T hs LUES to t q Typical -4 to UNIT 2 k s µs ELECTRICL SPECIFICTIONS OLTGE RTINGS TYPE NUMBER OLTGE CODE DRM/ RRM, MXIMUM REPETITIE PEK ND OFF-STTE OLTGE RSM, MXIMUM NON-REPETITIE PEK REERSE OLTGE l DRM/l RRM, MXIMUM T T = T MXIMUM m PTxxD Page 1 of 6

2 18PT Series FORWRD CONDUCTION Maximum average current at heatsink temperature PRMETER SYMBOL TEST CONDITIONS LUES UNIT Maximum RMS on-state current I T() I T(RMS) conduction, half sine wave double side (single side) cooled DC at 25 C heatsink temperature double side cooled 18(7) 55(85) 33 Maximum peak, one cycle non-reptitive surge current Maximum l²t for fusing I TSM 2 I t No voltage % RRM No voltage % RRM Sinusoidal half wave, initial T = T maximum k s Maximum l² t for fusing 2 I t t =.1 to 1 ms, no voltage k s Low level value of threshold voltage High level value of threshold voltage T(TO)1 T(TO)2 (16.7% x π x l < I < π x l ),T =T maximum T() T() (I > π x l ),T =T maximum T().9 1. Low level value on-state slope resistance High level value on-state slope resistance r t1 r t2 (16.7% x π x l < I < π x l ),T =T maximum T() T() (I > π x l ),T =T maximum T() mω Maximum on-state voltage TM l =4,T =T maximum t =1 ms sine pulse pk, p 1.6 Maximum holding current Typical latching current l H l L T = 25 C, anode supply 12 resistive load 3 m SWITCHING PRMETER SYMBOL TEST CONDITIONS LUES UNIT Maximum non-repetitive rate of rise of turned-on current dl/dt Gate drive, Ω, t 1µs r T =T maximum, anode voltage 8% DRM /µs Typical delay time Typical turn-off time t d t q Gate current 1, dl /dt =1 /µs g =.67, T = 25 C d DRM l TM = 5, T =T maximum, dl/dt = 4/µs. R =, d/dt = /µs, gate Ω, tp = µs 1.9 µs BLOCKING PRMETER SYMBOL TEST CONDITIONS LUES UNIT Maximum critical rate of rise of off-state voltage d/dt T =T maximum linear to 8% rated DRM /µs Maximum peak reverse and l RRM, off-state leakage current l T =T maximum, rated DRM/ RRM applied DRM, m Page 2 of 6

3 18PT Series TRIGGERING LUES PRMETER SYMBOL TEST CONDITIONS UNIT TYP. MX. Maximum peak gate power Maximum average gate power Maximum peak positive gate current Maximum peak positive gate voltage Maximum peak negative gate voltage P GM P G() I GM + GM - GM T = T maximum, t 5 ms p T = T maximum, f = Hz, d% = T = T maximum, t 5 ms p T = T maximum, t 5 ms p W T = -4 C - DC gate current required to trigger DC gate voltage required to trigger I GT GT T = 25 C T = 125 C T = -4 C T = 25 C Maximum required gate current/voltage are the lowest value which will trigger all units 12 anode to cathode applied m T = 125 C.9 - DC gate current not to trigger DC gate voltage not to trigger Maximum gate current/ l GD 1 voltage not to trigger is the T = T maximum maximum value which will not trigger any unit with rated GD.25 DRM anode to cathode applied m THERML ND MECHNICL SPECIFICTIONS PRMETER SYMBOL TEST CONDITIONS LUES UNIT Maximum operating junction temperature range Maximum storage temperature range Maximum thermal resistance, junction to heatsink Maximum thermal resistance, case to heatsink T T stg R th-hs R thc-hs DC operation single side cooled DC operation double side cooled DC operation single side cooled DC operation double side cooled -4 to to K/W Mounting force, ±1% pproximate weight Case style 24 (2) 4-24 (K-PUK), Nell s D-type Capsule N (kg) g RthC CONDUCTION CONDUCTION NGEL SINUSOIDL CONDUCTION RECTNGULR CONDUCTION SINGLE SIDE DOUBLE SIDE SINGLE SIDE DOUBLE SIDE Note The table above shows the increment of thermal resistance R th-hs when devices operate at different conduction angles than DC TEST CONDUCTIONS T = T maximum UNITS K/W Page 3 of 6

4 18PT Series Fig.1 Current ratings characteristics Fig.2 Current ratings characteristics (Single side cooled) R th-hs(dc) =.42K/W Conduction ngle (Single side cooled) 1 R th-hs(dc) =.42 K/W Conduction Period DC verage on-state current () verage on-state current () Fig.3 Current ratings characteristics Fig.4 Current ratings characteristics (Double side cooled) R th-hs(dc) =.21 K/W Conduction ngle 3 3 DC verage on-state current () verage on-state current () (Double side cooled) R th-hs(dc) =.21 K/W Conduction Period Fig.5 On-state power loss characteristics Fig.6 On-state power loss characteristics Maximum average on-state power loss(w) RMS Limit Conduction ngle T = 125 C Maximum average on-state power loss(w) 4 3 DC RMS Limit Conduction Period T = 125 C verage on-state current () verage on-state current () Page 4 of 6

5 Tj = 125 C 18PT Series Fig.7 Maximum non-repetitive surge current single and double side cooled Fig.8 Maximum non-repetitive surge current single and double side cooled Peak half sine wave on-state current() t ny Rated Load Condition nd With Rated RRM pplied Following Surge initial T = 125 6Hz.83 Hz. s Peak half sine wave on-state current() Maximum Non Repetitive Surge Current ersus Pulse Train Duration. Control Of Conduction May Not Be Maintained Initial T = 125 No oltage Reapplied Rated Reapplied RRM Number of equal amplitude half cycle current pulses (N) Pulse train duration (S) Fig.9 On-state voltage drop characteristcs Fig.1 Thermal lmpedance Zth-hs characteristics Instantaneous on-state current () T = 25 C T = 125 C Transient thermal lmpedance Z th-hs (K/W).1.1 Steady state value R =.42K/W th-hs (Single side cooled) R =.21K/W th-hs (Double side cooled) (DC operation) Instantaneous on-state voltage () Square wave pulse duration (s) Fig.11 Gate characteristics Instantaneous gate voltage () 1 1 Rectangular gate pulse a) Recommended load line for rated di/dt :, 1 ohms; tr<=1µs b) Recommended load line for <=3% rated di/dt : 1, 1 ohms tr<=1 µs GD Tj = 25 C (b) Tj = -4 C IGD Frequency Limited by PG() (a) (1) PGM = 16W, tp = 4ms (2) PGM = 3W, tp = 2ms (3) PGM = 6W, tp = 1ms (1) (2) (3) Instantaneous gate current () Page 5 of 6

6 18PT Series ORDERING INFORMTION TBLE Device code 18 PT 16 D Maximum average on-state current I T(), 18 for PT = Phase Control Thyristors oltage code, code = RRM/ RRM - D = PUK case -24 (K-PUK), Nell s D-type Capsule - Terminal type, for eyelet -24 (K-PUK ) ( Nell s D-type Capsule) Creepage distance: 28.88(1.137) minimum Strike distance: 18.(.78) minimum 6.2(.24) Min. Ø74.(2.91) MX. 4.7 (.18) ± (1.7) Ø3.5 (.14) x 2.5 (.1) deep, both ends.7(.3) MIN. Ø47.±.1(1.85) 2 places 27.6(1.9) MX. Pin receptacle MP (.3) MIN. Ø66(2.6) MX. K G ll dimensions in millimeters (inches) Page 6 of 6

ST280C..C SERIES 500A. Features. Typical Applications. Major Ratings and Characteristics. Bulletin I25159 rev. C 02/00. case style TO-200AB (A-PUK)

ST280C..C SERIES 500A. Features. Typical Applications. Major Ratings and Characteristics. Bulletin I25159 rev. C 02/00. case style TO-200AB (A-PUK) Bulletin I25159 rev. C 02/00 ST280C..C SERIES PHASE CONTROL THYRISTORS Hockey Puk Version Features Center amplifying gate Metal case with ceramic insulator International standard case TO-200AB (A-PUK)

More information

Phase Control Thyristors (Hockey PUK Version), 1745 A

Phase Control Thyristors (Hockey PUK Version), 1745 A Phase Control Thyristors (Hockey PUK Version), 1745 A VS- FEATURES Center amplifying gate Metal case with ceramic insulator International standard case K-PUK (A-24) High profile hockey PUK Designed and

More information

ST300S SERIES 300A. Features. Typical Applications. Major Ratings and Characteristics. Bulletin I25158 rev. B 01/94. case style TO-209AE (TO-118)

ST300S SERIES 300A. Features. Typical Applications. Major Ratings and Characteristics. Bulletin I25158 rev. B 01/94. case style TO-209AE (TO-118) ST300S SERIES PHASE CONTROL THYRISTORS Stud Version Features Center amplifying gate Hermetic metal case with ceramic insulator International standard case TO-209AE (TO-118) Threaded studs UNF 3/4-16UNF2A

More information

Phase Control Thyristors (Hockey PUK Version), 1350 A

Phase Control Thyristors (Hockey PUK Version), 1350 A Phase Control Thyristors (Hockey PUK Version), 1350 A FEATURES Center amplifying gate Metal case with ceramic insulator International standard case B-PUK (TO-200AC) Designed and qualified for industrial

More information

Phase Control Thyristors (Hockey-PUK Version), 2310 A

Phase Control Thyristors (Hockey-PUK Version), 2310 A Phase Control Thyristors (Hockey-PUK Version), 2310 A VS- FEATURES Center amplifying gate Metal case with ceramic insulator International standard case K-PUK (A-24) High profile hockey PUK Material categorization:

More information

50RIA SERIES 50 A. Features. Typical Applications. Major Ratings and Characteristics. Bulletin I2401 rev. A 07/00. Case Style TO-208AC (TO-65)

50RIA SERIES 50 A. Features. Typical Applications. Major Ratings and Characteristics. Bulletin I2401 rev. A 07/00. Case Style TO-208AC (TO-65) 50RIA SERIES MEDIUM POWER THYRISTORS Stud Version Features High current rating Excellent dynamic characteristics dv/dt = 0V/µs option Superior surge capabilities Standard package Metric threads version

More information

ST180S SERIES 200A. Stud Version PHASE CONTROL THYRISTORS. Features. Typical Applications. Major Ratings and Characteristics

ST180S SERIES 200A. Stud Version PHASE CONTROL THYRISTORS. Features. Typical Applications. Major Ratings and Characteristics ST180S SERIES PHASE CONTROL THYRISTORS Stud Version Features Center amplifying gate Hermetic metal case with ceramic insulator (Also available with glass-metal seal up to 1200V) International standard

More information

High Voltage Phase Control Thyristor, 12 A

High Voltage Phase Control Thyristor, 12 A High oltage Phase Control Thyristor, 2 3L TO-220B PRIMRY CHRCTERISTICS I T() 8 DRM / RRM 800 TM.2 I GT 5 m T J -40 C to 25 C Package Circuit configuration 2 () (K) (G) 3 3L TO-220B Single SCR FETURES Designed

More information

Thyristor High Voltage, Phase Control SCR, 40 A

Thyristor High Voltage, Phase Control SCR, 40 A Thyristor High Voltage, Phase Control SCR, 40 TO-247C 2 () (K) (G) 3 PRIMRY CHRCTERISTICS I T(V) 35 V DRM /V RRM 800 V, 200 V V TM.45 V I GT 50 m T J -40 C to +25 C Package TO-247C Circuit configuration

More information

Thyristor High Voltage, Phase Control SCR, 16 A

Thyristor High Voltage, Phase Control SCR, 16 A Thyristor High Voltage, Phase Control SCR, 6 3L TO-220B PRIMRY CHRCTERISTICS 2 () (K) (G) 3 I T(V) V DRM /V RRM 800 V, 0 V V TM.4 V I GT 60 m T J -40 C to 25 C Package 3L TO-220B Circuit configuration

More information

Phase Control Thyristors (Stud Version), 200 A

Phase Control Thyristors (Stud Version), 200 A TO209AB (TO93) ST180SPbF Series FEATURES Center amplifying gate International standard case TO209AB (TO93) Hermetic metal case with ceramic insulator (Also available with glassmetal seal up to 1200 ) RoHS

More information

Phase Control Thyristors (Stud Version), 330 A

Phase Control Thyristors (Stud Version), 330 A Phase Control Thyristors (Stud Version), 330 A TO-118 (TO- 209AE) PRIMARY CHARACTERISTICS I T(AV) 330 A 400 V, 800 V, 1200 V, 1400 V, V DRM /V RRM 1600 V, 2000 V V TM 1.52 V I GT 200 ma T J -40 C to +125

More information

Thyristor/Thyristor, 150 A (INT-A-PAK Power Module)

Thyristor/Thyristor, 150 A (INT-A-PAK Power Module) S-/4PbF Thyristor/Thyristor, 5 A (INT-A-PAK Power Module) INT-A-PAK PRIMARY CHARACTERISTICS I T(A) 5 A Type Modules - thyristor, standard Package INT-A-PAK FEATURES Electrically isolated by DBC ceramic

More information

Phase Control SCR, 70 A

Phase Control SCR, 70 A Phase Control SCR, 70 A 70TPS..PbF High oltage Series ishay High Power Products 2 (A) DESCRIPTION/FEATURES The 70TPS..PbF High oltage Series of silicon controlled rectifiers are specifically designed for

More information

Phase Control Thyristors (Stud Version), 300 A

Phase Control Thyristors (Stud Version), 300 A Phase Control Thyristors (Stud Version), 300 A TO-118 (TO- 209AE) PRIMARY CHARACTERISTICS I T(AV) 300 A 400 V, 800 V, 1200 V, 1600 V, V DRM /V RRM 1800 V, 2000 V V TM 1.28 V I GT 200 ma T J -40 C to +125

More information

Phase Control SCR, 70 A

Phase Control SCR, 70 A Phase Control SCR, 70 A 70TPS..PbF High oltage Series ishay High Power Products 2 (A) DESCRIPTION/FEATURES The 70TPS..PbF High oltage Series of silicon controlled rectifiers are specifically designed for

More information

MT..KB SERIES 50 A 90 A 100 A. Power Modules THREE PHASE AC SWITCH. Features. Description. Major Ratings and Characteristics. Bulletin I /97

MT..KB SERIES 50 A 90 A 100 A. Power Modules THREE PHASE AC SWITCH. Features. Description. Major Ratings and Characteristics. Bulletin I /97 MT..KB SERIES THREE PHASE AC SWITCH Power Modules Features Package fully compatible with the industry standard INT-A-pak power modules series High thermal conductivity package, electrically insulated case

More information

Thyristor High Voltage, Phase Control SCR, 40 A

Thyristor High Voltage, Phase Control SCR, 40 A S-40TPS6PbF, S-40TPS6-M3 Thyristor High oltage, Phase ontrol SR, 40 FETURES 2 () High voltage (up to 600 ) Designed and qualified according to JEDE -JESD47 25 max. operating junction temperature TO-247

More information

Phase Control Thyristors (Stud Version), 110 A

Phase Control Thyristors (Stud Version), 110 A Phase Control Thyristors (Stud Version), 110 A TO-209AC (TO-94) PRODUCT SUMMARY I T(AV) 110 A V DRM /V RRM 400 V, 1600 V V TM 1.52 V I GT 150 ma T J -40 C to 140 C Package TO-209AC (TO-94) Diode variation

More information

Thyristor Surface Mount, Phase Control SCR, 16 A

Thyristor Surface Mount, Phase Control SCR, 16 A Thyristor Surface Mount, Phase Control SCR, 6 4 2 D 2 PK (TO-263) PRIMRY CHRCTERISTICS 3 node 2, 4 3 Cathode Gate I T(V) 6 V DRM /V RRM 600 V V TM.25 V I GT 45 m T J -40 C to +25 C Package D 2 PK (TO-263)

More information

AAP Gen 7 (TO-240AA) Power Modules Thyristor/Thyristor, 105 A

AAP Gen 7 (TO-240AA) Power Modules Thyristor/Thyristor, 105 A AAP Gen 7 (TO-240AA) Power Modules Thyristor/Thyristor, 05 A FEATURES High voltage Industrial standard package UL approved file E78996 Low thermal resistance Designed and qualified for industrial level

More information

Medium Power Phase Control Thyristors (Stud Version), 50 A

Medium Power Phase Control Thyristors (Stud Version), 50 A Medium Power Phase Control Thyristors (Stud Version), 50 A VS- TO-208AC (TO-65) PRODUCT SUMMARY Package TO-208AC (TO-65) Diode variation Single SCR I T(AV) 50 A V DRM /V RRM V to 1200 V V TM 1.60 V I GT

More information

Thyristor High Voltage, Phase Control SCR, 25 A

Thyristor High Voltage, Phase Control SCR, 25 A Thyristor High Voltage, Phase Control SCR, 25 TO-220B 2 3 2 () (K) (G) 3 FETURES Easy control peak current at charger power up to reduce passive / electromechanical components Meets JESD 20 class whisker

More information

Medium Power Phase Control Thyristors (Stud Version), 16 A

Medium Power Phase Control Thyristors (Stud Version), 16 A Medium Power Phase Control Thyristors (Stud Version), 16 A VS- PRODUCT SUMMARY TO-208AA (TO-48) Package TO-208AA (TO-48) Diode variation Single SCR I T(AV) 16 A 0 V, 200 V, 400 V, 600 V, 800 V, V DRM /V

More information

Phase Control Thyristors (Stud Version), 110 A

Phase Control Thyristors (Stud Version), 110 A VS-RKI...PbF, VS-RKI...PbF Series Phase Control Thyristors (Stud Version), A TO-94 (TO-29AC) PRIMARY CHARACTERISTICS I T(AV) A V DRM /V RRM 4 V, 8 V, 2 V V TM.57 V I GT 8 ma T J -4 C to +4 C Package TO-94

More information

Thyristor High Voltage Surface Mount Phase Control SCR, 10 A

Thyristor High Voltage Surface Mount Phase Control SCR, 10 A VS-SPbF Series Thyristor High Voltage Surface Mount Phase Control SCR, 0 2 TO-263 (D 2 PK) 3 2, node Cathode 3 Gate PRODUCT SUMMRY Package TO-263 (D 2 PK) Diode variation Single SCR I T(V) 6.5 V DRM /V

More information

IRKU/V41, 56 SERIES 45 A 60 A. ADD-A-pak TM GEN V Power Modules THYRISTOR/ THYRISTOR. Features. Benefits. Mechanical Description

IRKU/V41, 56 SERIES 45 A 60 A. ADD-A-pak TM GEN V Power Modules THYRISTOR/ THYRISTOR. Features. Benefits. Mechanical Description Bulletin I2734 rev. E /2 IRKU/V4, 56 SERIES THYRISTOR/ THYRISTOR ADD-A-pak TM GEN V Power Modules Features High Voltage Industrial Standard Package Thick Al metal die and double stick bonding Thick copper

More information

Thyristor High Voltage, Phase Control SCR, 25 A

Thyristor High Voltage, Phase Control SCR, 25 A Thyristor High Voltage, Phase Control SCR, 25 2 () PRODUCT SUMMRY Package TO-220B Diode variation Single SCR I T(V) 6 V DRM /V RRM 800 V, 200 V V TM.25 V I GT 45 m T J - 40 C to 25 C FETURES Designed and

More information

VS-VSKT91.., VS-VSKH91.., VS-VSKL91.., VS-VSKN91.. Series

VS-VSKT91.., VS-VSKH91.., VS-VSKL91.., VS-VSKN91.. Series AAP Gen 7 (TO-4AA) Power Modules Thyristor/Diode and Thyristor/Thyristor, 95 A FEATURES High voltage Industrial standard package Low thermal resistance UL approved file E78996 Designed and qualified for

More information

ADD-A-PAK Generation VII Power Modules Thyristor/Diode and Thyristor/Thyristor, 45 A/60 A

ADD-A-PAK Generation VII Power Modules Thyristor/Diode and Thyristor/Thyristor, 45 A/60 A ADD-A-PAK Generation II Power Modules Thyristor/Diode and Thyristor/Thyristor, 45 A/6 A FEATURES High voltage Industrial standard package Low thermal resistance UL approved file E78996 Designed and qualified

More information

Medium Power Phase Control Thyristors (Stud Version), 50 A

Medium Power Phase Control Thyristors (Stud Version), 50 A Medium Power Phase Control Thyristors (Stud Version), 50 A VS- TO-208AC (TO-65) PRODUCT SUMMARY Package TO-208AC (TO-65) Diode variation Single SCR I T(AV) 50 A V DRM /V RRM V to 1200 V V TM 1.60 V I GT

More information

Thyristor, Surface Mount, Phase Control SCR, 16 A

Thyristor, Surface Mount, Phase Control SCR, 16 A Thyristor, Surface Mount, Phase Control SCR, 6 2 3 TO-263 (D 2 PK) node 2 3 Cathode Gate PRODUCT SUMMRY Package TO-263 (D 2 PK) Diode variation Single SCR I T(V) 6 V DRM /V RRM 800 V, 200 V V TM.25 V I

More information

Thyristor/Diode and Thyristor/Thyristor (SUPER MAGN-A-PAK TM Power Modules), 500 A

Thyristor/Diode and Thyristor/Thyristor (SUPER MAGN-A-PAK TM Power Modules), 500 A Vishay High Power Products Thyristor/Diode and Thyristor/Thyristor FEATURES High current capability High surge capability Industrial standard package 3 V RMS isolating voltage with non-toxic substrate

More information

IRK.105 SERIES 105 A. THYRISTOR/ DIODE and THYRISTOR/ THYRISTOR. ADD-A-pak TM GEN V Power Modules. Features. Benefits. Mechanical Description

IRK.105 SERIES 105 A. THYRISTOR/ DIODE and THYRISTOR/ THYRISTOR. ADD-A-pak TM GEN V Power Modules. Features. Benefits. Mechanical Description IRK.15 SERIES THYRISTOR/ DIODE and THYRISTOR/ THYRISTOR ADD-A-pak TM GEN V Power Modules Features High Voltage Industrial Standard Package Thick Al metal die and double stick bonding Thick copper baseplate

More information

Thyristor / Diode (Super MAGN-A-PAK Power Modules), 570 A

Thyristor / Diode (Super MAGN-A-PAK Power Modules), 570 A VS- Thyristor / Diode (Super MAGN-A-PAK Power Modules), 570 A FEATURES High current capability High surge capability Industrial standard package 3000 V RMS isolating voltage with non-toxic substrate Designed

More information

Thyristor High Voltage, Surface Mount Phase Control SCR, 16 A

Thyristor High Voltage, Surface Mount Phase Control SCR, 16 A VS-16TTS08S-M3, VS-16TTS12S-M3 Series Thyristor High Voltage, Surface Mount Phase Control SCR, 16 1 2 3 D 2 PK (TO-263) PRIMRY CHRCTERISTICS 2, 4 node 1 Cathode 3 Gate I T(V) V DRM /V RRM 800 V, 1200 V

More information

ADD-A-PAK Generation VII Power Modules Thyristor/Diode and Thyristor/Thyristor, 27 A

ADD-A-PAK Generation VII Power Modules Thyristor/Diode and Thyristor/Thyristor, 27 A FEATURES High voltage Industrial standard package UL approved file E78996 Low thermal resistance Compliant to RoHS directive /95/EC Designed and qualified for industrial level PRODUCT SUMMARY I T(A) or

More information

Thyristor/Thyristor (MAGN-A-PAK Power Modules), 320 A

Thyristor/Thyristor (MAGN-A-PAK Power Modules), 320 A Thyristor/Thyristor (MAGN-A-PAK Power Modules), 32 A MAGN-A-PAK PRIMARY CHARACTERISTICS I T(A) 32 A Type Modules - thyristor, standard Package MAGN-A-PAK FEATURES High voltage Electrically isolated base

More information

Two Separated Thyristor Module, 100A ( Low Profile Package ) 14, 15 I T(AV) CHARACTERISTICS to to 150

Two Separated Thyristor Module, 100A ( Low Profile Package ) 14, 15 I T(AV) CHARACTERISTICS to to 150 NKTA Series Two Separated Thyristor Module, A ( Low Profile Package ) FEATURES High voltage RMS isolating voltage High surge capability Planar SCR chips Heat transfer and isolation through direct copper

More information

Thyristor High Voltage, Phase Control SCR, 50 A

Thyristor High Voltage, Phase Control SCR, 50 A S-50TPS2L-M3 ishay Semiconductors Thyristor High oltage, Phase Control SCR, 50 A 2 3 TO-247AD 3L PRIMARY CHARACTERISTICS 2 (A) (K) (G) 3 I T(A) 50 A DRM / RRM 200 TM (typ.). I GT (typ.) 40 ma T J -40 C

More information

Thyristor High Voltage, Phase Control SCR, 50 A

Thyristor High Voltage, Phase Control SCR, 50 A S-TPS2LHM3 ishay Semiconductors Thyristor High oltage, Phase Control SCR, A 2 (A) FEATURES AEC-Q qualified, meets JESD 20 class A whisker test Flexible solution for reliable AC power rectification 2 3

More information

SERIES IRK.136,.142,.162

SERIES IRK.136,.142,.162 Bulletin I277 rev. C 3/2 THYRISTOR/DIODE and THYRISTOR/THYRISTOR SERIES IRK.36,.42,.62 NEW INT-A-pak Power Modules Features High Voltage Electrically Isolated by DBC Ceramic ( Al 2 O 3 ) 35 V RMS Isolating

More information

SD400C..C SERIES 800A. Hockey Puk Version STANDARD RECOVERY DIODES. Features. Typical Applications. Major Ratings and Characteristics

SD400C..C SERIES 800A. Hockey Puk Version STANDARD RECOVERY DIODES. Features. Typical Applications. Major Ratings and Characteristics SDC..C SERIES STANDARD RECOVERY DIODES Hockey Puk Version Features Wide current range High voltage ratings up to V High surge current capabilities Diffused junction Hockey Puk version Case style DO-AA

More information

Thyristor High Voltage, Phase Control SCR, 40 A

Thyristor High Voltage, Phase Control SCR, 40 A Thyristor High oltage, Phase Control SCR, 40 A FEATURES 2 (A) AEC-Q0 qualified meets ESD 20 class A whisker test 2 3 TO-247AD 3L (K) (G) 3 Flexible solution for reliable AC power rectification Easy control

More information

Inverter Grade Thyristors (Stud Version), 85 A

Inverter Grade Thyristors (Stud Version), 85 A Inverter Grade Thyristors (Stud Version), 85 A TO-94 (TO-209AC) PRIMARY CHARACTERISTICS Package TO-94 (TO-209AC) Circuit configuration Single SCR I T(AV) 85 A V DRM /V RRM 400 V, 0 V, 0 V, 0 V V TM 2.15

More information

SCR/SCR and SCR/Diode (MAGN-A-PAK TM Power Modules), 230 A

SCR/SCR and SCR/Diode (MAGN-A-PAK TM Power Modules), 230 A SCR/SCR and SCR/Diode (MAGNAPAK TM Power Modules), 230 A VSK.230..PbF Series FEATURES High voltage Electrically isolated base plate 3500 V RMS isolating voltage Industrial standard package Simplified mechanical

More information

Thyristor High Voltage, Phase Control SCR, 30 A

Thyristor High Voltage, Phase Control SCR, 30 A Thyristor High Voltage, Phase ontrol SR, 30 2 () FETURES High voltage (up to 1600 V) Designed and qualified according to JEDE -JESD47 TO-247 1 2 3 1 (K) (G) 3 125 max. operating junction temperature Material

More information

Inverter Grade Thyristors (Stud Version), 300 A

Inverter Grade Thyristors (Stud Version), 300 A Inverter Grade Thyristors (Stud Version), 300 A TO-118 (TO- 209AE) PRIMARY CHARACTERISTICS I T(AV) 300 A V DRM /V RRM V, 800 V, 1 V V TM 2.16 V I TSM at 3000 A I TSM at 60 Hz 3150 A I GT ma T J -40 C to

More information

Power Phase Modules Control - Thyristor/Thyristor. 50 Hz 4570 A. 60 Hz 4980 A

Power Phase Modules Control - Thyristor/Thyristor. 50 Hz 4570 A. 60 Hz 4980 A FEATURES High surge capability Qualified for industrial level Thick copper baseplate Easy mounting on heatsink TYPICAL APPLICATIONS Power supplies Machine tools control High power drives Welders Medium

More information

Thyristor High Voltage, Phase Control SCR, 40 A

Thyristor High Voltage, Phase Control SCR, 40 A S-40TPS2LHM3, S-40TPS2ALHM3 Thyristor High oltage, Phase Control SCR, 40 A FEATURES 2 (A) Low I GT parts available AEC-Q0 qualified meets JESD 20 class A whisker test 2 3 TO-247AD 3L (K) (G) 3 Flexible

More information

VS-70TPS12PbF, VS-70TPS16PbF High Voltage Series Thyristor High Voltage, Phase Control SCR, 70 A

VS-70TPS12PbF, VS-70TPS16PbF High Voltage Series   Thyristor High Voltage, Phase Control SCR, 70 A Thyristor High Voltage, Phase Control SCR, 70 A 2 (A) FEATURES High surge capability High voltage input rectification 2 Designed and qualified according to JEDEC -JESD47 3 Super TO-247 (K) (G) 3 Material

More information

Three Phase AC Switch (Power Modules), 50 A to 100 A

Three Phase AC Switch (Power Modules), 50 A to 100 A 54-94-4MT..KPbF Series Three Phase AC Switch (Power Modules), 5 A to A MTK PRODUCT SUMMARY I O RRM Package Circuit 5 A to A 8 to 6 MT-K Three phase AC switch FEATURES Package fully compatible with the

More information

APPLICATION DC motor control, NC equipment, Inverters, Servo drives, contactless switches, electric furnace temperature control, light dimmers. 2 φ5.

APPLICATION DC motor control, NC equipment, Inverters, Servo drives, contactless switches, electric furnace temperature control, light dimmers. 2 φ5. TMR-M,-H TMR-M,-H PPLICTION DC motor control, NC equipment, Inverters, Servo drives, contactless switches, electric furnace temperature control, light dimmers OUTLINE DRWING & CIRCUIT DIGRM 1 4.6 K1 K

More information

IT (AV) A VDRM...400V/600V JEDEC : TO-92. Conditions A IT (AV) Commercial frequency, sine half wave, 180 conduction, Ta=47 C A ITSM

IT (AV) A VDRM...400V/600V JEDEC : TO-92. Conditions A IT (AV) Commercial frequency, sine half wave, 180 conduction, Ta=47 C A ITSM OUTLINE DRWING φ. MX. Dimensions in mm CTHODE NODE GTE OLTGE CLSS TYPE NME. MX. MIN CIRCUMSCRIBE CIRCLE φ.....9 MX IT ().... DRM.../ IGT...µ JEDEC : TO-9 PPLICTION Leakage protector, timer, gas ignitor

More information

Fast Soft Recovery Rectifier Diode, 80 A

Fast Soft Recovery Rectifier Diode, 80 A VS-8PF..PbF Series, VS-8PF..-M3 Series Fast Soft Recovery Rectifier Diode, 8 Base cathode + 2 FETURES Glass passivated pellet chip junction 15 C max. operating junction temperature Low forward voltage

More information

IR Series 25TTS..FP PHASE CONTROL SCR TO-220 FULLPAK V T I TSM V RRM. 800 to 1600V < 16A = 300A. Bulletin I2135 rev.

IR Series 25TTS..FP PHASE CONTROL SCR TO-220 FULLPAK V T I TSM V RRM. 800 to 1600V < 16A = 300A. Bulletin I2135 rev. IR Series 25TTS..FP PHASE CONTROL SCR TO-220 FULLPAK Description/Features The 25TTS..FP IR series of silicon controlled rectifiers are specifically designed for medium power switching and phase control

More information

Fast Soft Recovery Rectifier Diode, 20 A

Fast Soft Recovery Rectifier Diode, 20 A VS-2ETF..PbF Series, VS-2ETF..-M3 Series Fast Soft Recovery Rectifier Diode, 2 FETURES 2 TO-22C 3 Base cathode 2 3 Cathode node Glass passivated pellet chip junction C max operating junction temperature

More information

not Recommend for New Design TM130DZ/CZ/PZ-M,-H HIGH POWER GENERAL USE

not Recommend for New Design TM130DZ/CZ/PZ-M,-H HIGH POWER GENERAL USE TMDZ/CZ/PZ-M,-H TMDZ/CZ/PZ-M,-H (DZ Type) PPLICTION DC motor control, NC equipment, C motor control, Contactless switches, Electric furnace temperature control, Light dimmers OUTLINE DRWING & CIRCUIT DIGRM

More information

SCR/SCR and SCR/Diode (MAGN-A-PAK Power Modules), 170 A, 250 A

SCR/SCR and SCR/Diode (MAGN-A-PAK Power Modules), 170 A, 250 A SCR/SCR and SCR/Diode (MAGNAPAK Power Modules), 17 A, 25 A MAGNAPAK PRIMARY CHARACTERISTICS I T(AV) 17 A, 25 A Type Modules thyristor, standard Package MAGNAPAK FEATURES High voltage Electrically isolated

More information

TFI V DRM V DSM V RRM V RSM

TFI V DRM V DSM V RRM V RSM FAST SWITCHING THYRISTOR V DRM /V RRM = 2200 2400 V I T(AV) = 2500 A (T C = 80 C) I T(AV) = 3400 A (T C = 55 C) I TSM = 40 ka (T Vj = 125 C) Interdigitated amplifying gate Low on-state switching losses

More information

Power Modules, Passivated Assembled Circuit Elements, 25 A

Power Modules, Passivated Assembled Circuit Elements, 25 A Power Modules, Passivated Assembled Circuit Elements, 25 A VS-P Series FEATURES Glass passivated junctions for greater reliability Electrically isolated base plate PACE-PAK (D-9) PRIMARY CHARACTERISTICS

More information

2N5060 Series Preferred Device. Sensitive Gate Silicon Controlled Rectifiers. Reverse Blocking Thyristors

2N5060 Series Preferred Device. Sensitive Gate Silicon Controlled Rectifiers. Reverse Blocking Thyristors Preferred Device Sensitive Gate Silicon Controlled Rectifiers Reverse Blocking Thyristors nnular PNPN devices designed for high volume consumer applications such as relay and lamp drivers, small motor

More information

SCR / SCR and SCR / Diode (MAGN-A-PAK Power Modules), 230 A

SCR / SCR and SCR / Diode (MAGN-A-PAK Power Modules), 230 A VSVSK.23..PbF Series SCR / SCR and SCR / Diode (MAGNAPAK Power Modules), 23 A PRODUCT SUMMARY I T(AV) 23 A Type Modules thyristor, standard Package MAGNAPAK Circuit configuration MAGNAPAK Two SCRs doubler

More information

IT (AV) A VDRM V JEDEC : TO-92. Conditions A IT (AV) Commercial frequency, sine half wave, 180 conduction, Ta=30 C A ITSM

IT (AV) A VDRM V JEDEC : TO-92. Conditions A IT (AV) Commercial frequency, sine half wave, 180 conduction, Ta=30 C A ITSM CRM-8 GLSS PSSITION TYPE CRM-8 OUTLINE DRWING φ. MX. Dimensions in mm T TERMINL T TERMINL GTE TERMINL OLTGE CLSS TYPE NME. MX. MIN CIRCUMSCRIBE CIRCLE φ.....9 MX IT ().... DRM... IGT...µ JEDEC : TO-9 PPLICTION

More information

Power Modules, Passivated Assembled Circuit Elements, 40 A

Power Modules, Passivated Assembled Circuit Elements, 40 A Power Modules, Passivated Assembled Circuit Elements, 4 A FEATURES Glass passivated junctions for greater reliability Electrically isolated base plate PACE-PAK (D-9) PRIMARY CHARACTERISTICS I O 4 A Type

More information

Surface Mountable Phase Control SCR, 16 A

Surface Mountable Phase Control SCR, 16 A D 2 PAK PRODUCT SUMMARY V T at 16 A I TSM V RRM Anode 2 1 3 Cathode Gate < 1.25 V 300 A 800 V to 1600 V FEATURES Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C Compliant to RoHS directive 2002/95/EC

More information

VS-70TPS12PbF, VS-70TPS16PbF High Voltage Series High Voltage Phase Control Thyristor, 70 A

VS-70TPS12PbF, VS-70TPS16PbF High Voltage Series   High Voltage Phase Control Thyristor, 70 A High Voltage Phase Control Thyristor, 70 A Super TO-247 PRODUCT SUMMARY 2 (A) 1 (K) (G) 3 Package Super TO-247 Diode variation Single SCR I T(AV) 70 A V DRM /V RRM 1200 V, 1600 V V TM 1.4 V I GT 100 ma

More information

TK18. Phase Control Thyristor Advance Information Replaces January 2000 version, DS DS July 2001 TK18

TK18. Phase Control Thyristor Advance Information Replaces January 2000 version, DS DS July 2001 TK18 Phase Control Thyristor Advance Information Replaces January 2000 version, DS45253-4.0 DS4253-5.0 July 2001 FEATURES High Surge Capability APPLICATIONS High Power Drives High Voltage Power Supplies DC

More information

High Voltage, Input Rectifier Diode, 20 A

High Voltage, Input Rectifier Diode, 20 A VS-2ETS6PbF, VS-2ETS6-M3 High Voltage, Input Rectifier Diode, 2 2 TO-22C 3 Base cathode 2 3 Cathode node FETURES Very low forward voltage drop 5 C max. operating junction temperature Glass passivated pellet

More information

Single phase bridge. (Power Modules), 25 A/35 A

Single phase bridge. (Power Modules), 25 A/35 A Single Phase Bridge (Power Modules), 25 /35 GBPC... PRODUCT SUMMRY I O V RRM Package Circuit GBPC...W 25 to 35 V to V GBPC.., GBPC..W Single phase bridge FETURES Universal, 3 way terminals: push-on, wrap

More information

POW-R-BLOK TM Dual SCR Isolated Module 250 Amperes / Up to 1600 Volts. ND43 25 Dual SCR Isolated POW-R-BLOK TM Module 250 Amperes / Up to 1600 Volts

POW-R-BLOK TM Dual SCR Isolated Module 250 Amperes / Up to 1600 Volts. ND43 25 Dual SCR Isolated POW-R-BLOK TM Module 250 Amperes / Up to 1600 Volts 25 mperes / Up to 16 olts G J 1 G1 G2 2 OUTLINE DRWING T - M8 THD. (3 TYP.) M U - DI. (4 TYP.) N C B S Q W Description: Powerex Dual SCR Modules are designed for use in applications requiring phase control

More information

VS-VSK.136..PbF, VS-VSK.142..PbF, VS-VSK.162..PbF Series

VS-VSK.136..PbF, VS-VSK.142..PbF, VS-VSK.162..PbF Series VSVSK.36..PbF, VSVSK.42..PbF, VSVSK.62..PbF Series Thyristor/Diode and Thyristor/Thyristor, 35 A to 6 A (New INTAPAK Power Modules) PRODUCT SUMMARY I T(AV) 35 A to 6 A Type Modules Thyristor, Standard

More information

High Voltage, Input Rectifier Diode, 10 A

High Voltage, Input Rectifier Diode, 10 A VS-ETS...PbF Series, VS-ETS...M3 Series High Voltage, Input Rectifier Diode, Base cathode 3 3 TO-C Cathode node PRODUCT SUMMRY Package TO-C I F(V) V R 8 V to V V F at I F. V I FSM 6 T J max. 5 C Diode

More information

301U(R) SERIES 300A. Stud Version STANDARD RECOVERY DIODES. Features. Typical Applications. Major Ratings and Characteristics

301U(R) SERIES 300A. Stud Version STANDARD RECOVERY DIODES. Features. Typical Applications. Major Ratings and Characteristics 301U(R) SERIES STANDARD RECOVERY DIODES Stud Version Features Wide current range High voltage ratings up to 2500V High surge current capabilities Stud cathode and stud anode version High resistance to

More information

PINNING - TO220AB PIN CONFIGURATION SYMBOL

PINNING - TO220AB PIN CONFIGURATION SYMBOL series GENERAL DESCRIPTION QUICK REFERENCE DATA Glass passivated thyristors in a plastic SYMBOL PARAMETER MAX. MAX. MAX. UNIT envelope, intended for use in applications requiring high - 4R 6R 8R bidirectional

More information

LDR3 Outline Dimensions. Dimension Inches Millimeters

LDR3 Outline Dimensions. Dimension Inches Millimeters OUTLINE DRAWING Dual SCR Module 5 Amperes / 16-18 Volts Ordering Information: Select the complete eight-digit module part number from the table below. Example: LDR3165 is a 16V, 5 Ampere Dual SCR Isolated

More information

70HF(R) SERIES 70 A. Stud Version STANDARD RECOVERY DIODES. Features. Typical Applications. Major Ratings and Characteristics

70HF(R) SERIES 70 A. Stud Version STANDARD RECOVERY DIODES. Features. Typical Applications. Major Ratings and Characteristics 70HF(R) SERIES STANDARD RECOVERY DIODES Stud Version Features High surge current capability Designed for a wide range of applications Stud cathode and stud anode version Leaded version available 70 A Types

More information

High Voltage Surface Mount Input Rectifier Diode, 25 A

High Voltage Surface Mount Input Rectifier Diode, 25 A High Voltage Surface Mount Input Rectifier Diode, 25 2 D 2 PK (TO-263) node PRIMRY CHRCTERISTICS 3 ase cathode 2 3 node I F(V) 25 V R 2 V V F at I F.4 V I FSM 3 T J max. 5 C Package D 2 PK (TO-263) Circuit

More information

POW-R-BLOK TM Dual SCR/Diode Isolated Module 150 Amperes / Up to 1800 Volts CD62 15B, CD67 15B

POW-R-BLOK TM Dual SCR/Diode Isolated Module 150 Amperes / Up to 1800 Volts CD62 15B, CD67 15B 5 mperes / Up to Volts B G "J" () OUTLINE DRWING D E F F 6 7 4 5 M "K" () R S Description: Powerex SCR/Diode Modules are designed for use in applications requiring phase control and isolated packaging.

More information

MAXIMUM ALLOWABLE RATINGS

MAXIMUM ALLOWABLE RATINGS PROTON-ELECTROTEX RUSSIA Phase Control Thyristor High power cycling capability Low on-state and switching losses Designed for traction and industrial applications Mean on-state current ITA Repetitive peak

More information

Value Unit I T(RMS) RMS on-state current A A Tj = 25 C I FSM current (Tj initial = 25 C)

Value Unit I T(RMS) RMS on-state current A A Tj = 25 C I FSM current (Tj initial = 25 C) MAIN FEATURES: DIODE / SCR MODULE Symbol Value Unit I T(RMS) 50-70-85 A V DRM /V RRM 800 and 1200 V I GT 50 and 100 ma DESCRIPTION Packaged in ISOTOP modules, the MDS Series is based on the half-bridge

More information

VS-10ETS08S-M3, VS-10ETS10S-M3, VS-10ETS12S-M3 Series High Voltage Surface Mount Input Rectifier Diode, 10 A

VS-10ETS08S-M3, VS-10ETS10S-M3, VS-10ETS12S-M3 Series  High Voltage Surface Mount Input Rectifier Diode, 10 A VS-ETS8S-M3, VS-ETSS-M3, VS-ETSS-M3 Series High Voltage Surface Mount Input Rectifier Diode, FETURES TO-63 (D PK) 3 node ase cathode 3 node Meets MSL level, per J-STD-, LF maximum peak of 6 C Glass passivated

More information

BTA40 and BTA/BTB41 Series

BTA40 and BTA/BTB41 Series STANDARD 4A TRIACS MAIN FEATURES: Symbol Value Unit I T(RMS) 4 A G V DRM /V RRM 6 and 8 V A1 A1 I GT (Q1 ) 5 ma G DESCRIPTION Available in high power packages, the BTA/ BTB4-41 series is suitable for general

More information

BCR5KM. APPLICATION Control of heater such as electric rice cooker, electric pot. BCR5KM OUTLINE DRAWING Dimensions in mm

BCR5KM. APPLICATION Control of heater such as electric rice cooker, electric pot. BCR5KM OUTLINE DRAWING Dimensions in mm Refer to the page 6 as to the product guaranteed maximum junction temperature C OUTLINE DRWING Dimensions in mm ±..8 ±. 1 ±. ±. 6. ±. φ. ±. 1 ±..6 ±. 1.1 ±. 1.1 ±. E. ±.. ±.1. ±.. ±.1 IT (RMS)... DRM...

More information

Fast Soft Recovery Rectifier Diode, 20 A

Fast Soft Recovery Rectifier Diode, 20 A D 2 PK (SMD-22) PRODUCT SUMMRY V F at 2 I FSM V RRM Base common cathode + 2 node - - 2ETF..SPbF Soft Recovery Series Rectifier Diode, 2 3 node

More information

High Voltage Surface Mount Input Rectifier Diode, 20 A

High Voltage Surface Mount Input Rectifier Diode, 20 A VS-2ETS8SPbF, VS-2ETS2SPbF High Voltage Surface Mount Input Rectifier Diode, 2 FETURES 2 TO-263 (D 2 PK) 3 node ase cathode 2 3 node Meets MSL level, per J-STD-2, LF maximum peak of 26 C Glass passivated

More information

BTA16-600BW3G, BTA16-800BW3G,

BTA16-600BW3G, BTA16-800BW3G, BTA6-600BW3G, BTA6-800BW3G, Pb Description Designed for high performance full wave ac control applications where high noise immunity and high commutating di/dt are required. Features Blocking oltage to

More information

SD233N/R SERIES 235A. Features. Typical Applications. Major Ratings and Characteristics. Bulletin I2094 rev. B 10/06. case style B-8.

SD233N/R SERIES 235A. Features. Typical Applications. Major Ratings and Characteristics. Bulletin I2094 rev. B 10/06. case style B-8. SD33N/R SERIES FAST RECOVERY DIODES Stud Version Features High power FAST recovery diode series.5 µs recovery time High voltage ratings up to 5V High current capability Optimized turn on and turn off characteristics

More information

Standard Recovery Diodes, (Stud Version), 40 A

Standard Recovery Diodes, (Stud Version), 40 A Standard Recovery Diodes, (Stud ersion), 40 A S- FEATURES High surge current capability Stud cathode and stud anode version Leaded version available DO-5 (DO-203AB) PRIMARY CHARACTERISTICS I F(A) 40 A

More information

BTA30H-600CW3G, BTA30H-800CW3G

BTA30H-600CW3G, BTA30H-800CW3G BTA30H-600CW3G, BTA30H-800CW3G Pb Description Designed for high performance full-wave ac control applications where high noise immunity and high commutating di/dt are required. Features Blocking oltage

More information

Unit IT (RMS) ITSM. Conditions. Commercial frequency, sine full wave 360 conduction, Tc=98 C 60Hz sinewave 1 full cycle, peak value, non-repetitive

Unit IT (RMS) ITSM. Conditions. Commercial frequency, sine full wave 360 conduction, Tc=98 C 60Hz sinewave 1 full cycle, peak value, non-repetitive OUTLINE DRWING Dimensions in mm MX TYPE NME CLSS.±.. MIN. MX. MX.. φ.6±. 1.. 1.....6. IT (RMS)... DRM.../ IFGT!, IT!, IT #... m (m) 1 1 1T1 TERMINL T TERMINL GTE TERMINL T TERMINL TO- Measurement point

More information

BTB08-600BW3G, BTB08-800BW3G

BTB08-600BW3G, BTB08-800BW3G BTB08-600BW3G, BTB08-800BW3G Pb Description Designed for high performance full-wave ac control applications where high noise immunity and high commutating di/dt are required. Features Blocking oltage to

More information

IRK. SERIES 250A 270A 320A STANDARD RECOVERY DIODES. MAGN-A-pak Power Modules. Features. Description. Major Ratings and Characteristics

IRK. SERIES 250A 270A 320A STANDARD RECOVERY DIODES. MAGN-A-pak Power Modules. Features. Description. Major Ratings and Characteristics Bulletin I279 rev. D 1/6 IRK. SERIES STANDARD RECOVERY DIODES Features High voltage Electrically isolated base plate 3 V RMS isolating voltage Industrial standard package Simplified mechanical designs,

More information

Conditions. Unit IT (RMS) ITSM. Commercial frequency, sine full wave 360 conduction, Tc=86 C 60Hz sinewave 1 full cycle, peak value, non-repetitive

Conditions. Unit IT (RMS) ITSM. Commercial frequency, sine full wave 360 conduction, Tc=86 C 60Hz sinewave 1 full cycle, peak value, non-repetitive OUTLINE DRWING MX Dimensions in mm φ.±.1 TYPE NME CLSS 8 MX 1.±.1.8.8.±..7± MX 1 MIN.. MIN. MX 1 Measurement point of case temperature IT (RMS)... DRM.../6 IFGT!, IT!, IT #... m (1m) 6 ±.1 MX 1T1 TERMINL

More information

Phase Control Thyristor RMS SCRs, 25 A, 35 A

Phase Control Thyristor RMS SCRs, 25 A, 35 A VS-N681, VS-N Series Phase Control Thyristor RMS SCRs, A, 3 A TO-8 (TO-8AA) V DRM /V RRM PRIMARY CHARACTERISTICS I T(AV) 16 A, A I T(RMS) A, 3 A 3 V, V, V, 6 V, 7 V, 8 V, V, V, 1 V, 1 V, V, V, 1 V 1 V

More information

BTA08-800CW3G. Thyristors. Surface Mount 800V > BTA08-800CW3G. Description

BTA08-800CW3G. Thyristors. Surface Mount 800V > BTA08-800CW3G. Description BTA08-800CW3G Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supply crowbar circuits. Features Blocking oltage to 800 On-State

More information

85HF(R) SERIES 85 A. Stud Version STANDARD RECOVERY DIODES. Features. Typical Applications. Major Ratings and Characteristics

85HF(R) SERIES 85 A. Stud Version STANDARD RECOVERY DIODES. Features. Typical Applications. Major Ratings and Characteristics 85HF(R) SERIES STANDARD RECOVERY DIODES Stud Version Features High surge current capability Stud cathode and stud anode version Leaded version available 85 A Types up to 1600V V RRM Typical Applications

More information

Conditions Commercial frequency, sine full wave 360 conduction, Tc=103 C 3. Unit A ITSM. 60Hz sinewave 1 full cycle, peak value, non-repetitive

Conditions Commercial frequency, sine full wave 360 conduction, Tc=103 C 3. Unit A ITSM. 60Hz sinewave 1 full cycle, peak value, non-repetitive Refer to the page 6 as to the product guaranteed maximum junction temperature C OUTLINE DRWING Dimensions in mm TYPE NME CLSS 1. MX 6..±..9 MX 1.... MIN.±. 1.±. MX.±..8.±.1. Measurement point of case temperature

More information

Conditions Commercial frequency, sine full wave 360 conduction, Tc=56 C 4 60Hz sinewave 1 full cycle, peak value, non-repetitive

Conditions Commercial frequency, sine full wave 360 conduction, Tc=56 C 4 60Hz sinewave 1 full cycle, peak value, non-repetitive OUTLINE DRWING φ. MX. Dimensions in mm T TERMINL T TERMINL GTE TERMINL CLSS TYPE NME. MX. MIN CIRCUMSCRIBE CIRCLE φ... IT (RMS)... DRM... 6 IFGT!, IT!, IT #... m IFGT #...m JEDEC : TO-9..9 MX PPLICTION

More information

DCR780G42. Phase Control Thyristor Preliminary Information KEY PARAMETERS FEATURES 4200V 780A 10500A I T(AV) I TSM APPLICATIONS ORDERING INFORMATION

DCR780G42. Phase Control Thyristor Preliminary Information KEY PARAMETERS FEATURES 4200V 780A 10500A I T(AV) I TSM APPLICATIONS ORDERING INFORMATION Phase Control Thyristor Preliminary Information DS5829-1.2 August 27 (LN25545) FEATURES KEY PARAMETERS Double Side Cooling High Surge Capability V DRM I T(AV) I TSM dv/dt* di/dt 42V 78A 15A 15V/µs 4A/us

More information