Operating instructions Measured signal converter for temperature sensors. TP323x / / 2010
|
|
- Christopher Marcus Warren
- 5 years ago
- Views:
Transcription
1 Operating instructions Measured signal converter for temperature sensors TPx / / 00
2 Contents Preliminary note.... Symbols used... Safety instructions... Functions and features... Function... 5 Installation... 6 Electrical connection... 7 Parameter setting Operation Scale drawing Technical data...6 Factory setting...7 Preliminary note. Symbols used Instruction > Reaction, result Cross-reference Important note Non-compliance can result in malfunction or interference. Safety instructions Please read this document prior to set-up of the unit. Ensure that the product is suitable for your application without any restrictions. Improper or non-intended use may lead to malfunctions of the unit or to unwanted effects in your application. That is why installation, electrical connection, set-up, operation and maintenance of the unit must only be carried out by qualified personnel authorised by the machine operator.
3 Functions and features In connection with a temperature probe the unit monitors the system temperature in machines and plants. Connectable temperature probes: Temperature sensors TM, TS, TT. Resistance thermometer RTD (Pt 00 or Pt 000). The unit detects the connected sensor type and configures itself accordingly. Function The unit converts the measured signal into a temperature-proportional analogue signal:...0 ma at [OU] = [I] / 0... ma at [OU] = [Ineg]. The analogue signal can be scaled. Factory setting 0 Technical data. In addition, the unit provides the measured signal via IO-Link. The unit is laid out for fully bidirectional communication. So, the following options are possible: -- Remote display: reading and displaying the current system temperature. -- Remote parameter setting: reading and changing the current parameter setting. For IO-Link parameter setting IO-Device Description (IODD) at: com Service Download 5 Installation Connect the unit to a temperature probe. : Connection for voltage supply and output signals : Connection for temperature probe
4 6 Electrical connection The unit must be connected by a qualified electrician. The national and international regulations for the installation of electrical equipment must be adhered to. Voltage supply to EN 5078, SELV, PELV. Disconnect power. Connect the unit as follows: L+ L L+ L IO-Link L LED LED / : Connection Ub and output signals Pin Pin Pin (OUT) Pin (OUT) Ub+ Ub- Data channel for bidirectional communication. Analogue signal for temperature. : Connection of a -wire measuring probe; links between / and /. A wire fault can be corrected in the menu COF. : Connection of a -wire measuring probe. LED : lit in case of operation as -wire unit, IO-Link communication is possible. LED : lit in case of a load on the analogue output.
5 7 Parameter setting Connect the unit via the IO-Link interface to the PC or PLC. In case of parameter setting with the user interface of the ifm Container program, the values can be directly entered in the specified fields. For IO-Link parameter setting IO-Device Description (IODD) at: com Service Download The following parameters can be set: OU ASP AEP COF FOU Uni Output function for OUT: Analogue signal:...0 ma [I] or 0... ma [Ineg]. Analogue start value for temperature. Measured value at which the output signal is ma (0 ma at [OU] = [Ineg]). Analogue end value for temperature. Measured value at which the output signal is 0 ma ( ma at [OU] = [Ineg]). Zero-point calibration. Setting range: ±0 K in steps of 0. K. The internal measured value "0" is shifted by this value. Behaviour of output in case of an internal fault. --[On] = the analogue signal goes to the upper end stop value (.0 ma). --[OFF] = the analogue signal goes to the lower end stop value (.5 ma.) Unit of measurement for system temperature: C or F. 8 Operation After power on, the unit is in the Run mode (= normal operating mode). Response of the analogue output in case of a fault: Value below the set measuring range --The output signal falls to min..8 ma (at [OU] = [I]), --rises to max. 0.5 ma (at [OU] = [Ineg]). Value above the set measuring range --The output signal rises to max. 0.5 ma (at [OU] = [I]), --falls to min..8 ma (at [OU] = [Ineg]). Value below or above the detection Analogue signal acc. to setting [FOU]. zone of the sensor 5
6 9 Scale drawing 5 Mx 8 LED 5 Mx Dimensions in mm : Connection for voltage supply and output signals : Connection for temperature sensor 0 Technical data Measuring range [ C] / [ F] / Communication interface... IO-Link.0 Baud rate [kbaud] Operating voltage [V] DC Short-circuit protection (pulsed); reverse polarity protection, overload protection Integrated watchdog Analogue output ma Max. load [Ω]...00 Rise time analogue output [ms]...00 Accuracy - measured value via IO-Link [K]... ± 0. + (± 0. % of the measuring span) - analogue output [K]... ± 0. + (± 0. % of the measuring span) Resolution [K] Temperature coefficient (in % of the span per 0 K)
7 Housing materials... PA PACM (TROGAMID); PET; sealing: FPM (Viton);... coupling nut: stainless steel 6L /.0; connector: TPU Ambient temperature [ C] Storage temperature [ C] Protection rating... IP 67 Protection class...iii Shock resistance [g] (DIN / IEC 68--7, ms) Vibration resistance [g]... 0 ( DIN / IEC 68--6, Hz) EMC... EN 66- Factory setting Factory setting TP TP TP TP7 OU I I I I ASP AEP COF FOU OFF OFF OFF OFF Uni C C F C User setting More information at 7
Operating instructions Measured signal converter for temperature sensors TP / / 2010
Operating instructions Measured signal converter for temperature sensors TP7 7068 / 00 0 / 00 Contents Preliminary note.... Symbols used... Safety instructions... Functions and features... Function...
More informationOperating instructions Temperature transmitters. TA2xxx / / 2015
Operating instructions Temperature transmitters TA2xxx UK 80026566 / 00 05 / 2015 Contents 1 Remark...2 1.1 Explanation of symbols...2 2 Safety instructions...3 3 Functions and features...3 Function...
More informationOperating instructions. Electronic pressure sensor PY2068 ENGLISH
Operating instructions R Electronic pressure sensor PY068 704803/00 06/00 ENGLIH Contents afety instructions................................ page 0 Controls and indicating elements.....................
More informationOperating instructions optical fork sensor OPU200 OPU200 / / 2018
Operating instructions optical fork sensor OPU200 OPU200 / 0 08 / 208 Contents Preliminary note.... Symbols used... 2 Functions and features... Installation... 4 Operating and display elements... 5 Electrical
More informationPI2794. Flush pressure sensor with display. 1 alphanumeric display 4-digit 2 status LEDs 3 programming button. Made in Germany
1 alphanumeric display 4-digit 2 status LEDs 3 programming button Made in Germany Application Application hygienic systems Media viscous media and liquids with suspended particles; liquids and gases Medium
More informationOperating instructions Magnetic-inductive flow meter SM6050 SM7050 SM / / 2016
Operating instructions Magnetic-inductive flow meter SM6050 SM7050 SM8050 UK 80237074 / 00 06 / 2016 Contents 1 Preliminary note...3 2 Safety instructions...3 3 unctions and features...4 4 unction...4
More informationOperating instructions. Combined pressure sensor PN /00 11/03
Operating instructions R Combined pressure sensor PN 7080/00 /03 Contents afety instructions..................................... page 5 Controls and indicating elements.......................... page
More informationOperating instructions Electronic level sensor LK / / 2008
Operating instructions Electronic level sensor LK31 UK 704046 / 00 01 / 2008 Contents Safety instructions...2 Menu structure...3 Controls and indicating elements...4 Function and features...5 Functional
More informationOperating instructions Switching amplifier for fibre optics. OBF5xx / / 2009
Operating instructions Switching amplifier for fibre optics OBF5xx 704513 / 00 04 / 009 Contents 1 Preliminary note...3 1.1 Symbols used...3 Functions and features...3.1 Applications...3 3 Installation...3
More informationOperating instructions Magnetic-inductive flow meter FMM FMM FMM
Operating instructions Magnetic-inductive flow meter FMM50-1002 FMM75-1002 FMM100-1002 Scan or Click the above QR Code or go to https://www.automationdirect.com/vid-fl-0003 for a short quick start video.
More informationOriginal operating instructions Fail-safe inductive sensor GG507S / / 2013
Original operating instructions Fail-safe inductive sensor GG507S 80005283 / 00 05 / 2013 Contents 1 Preliminary note...3 1.1 Explanation of symbols...3 2 Safety instructions...4 2.1 Safety-related requirements
More informationOperating instructions Electronic level sensor LR / / 2012
Operating instructions Electronic level sensor LR3300 UK 706148 / 00 02 / 2012 Contents 1 Preliminary note...4 1.1 Symbols used...4 2 Safety instructions...4 3 Items supplied...5 4 Functions and features...6
More informationAnalogue Temperature Transmitter Model T24.10, PC configurable, Head Mounting
Electrical Temperature Measurement Analogue Temperature Transmitter Model T24.10, PC configurable, Head Mounting WIKA Data Sheet TE 24.01 Applications T Machinery, plant construction T Process industry
More informationOperating instructions Contrast sensor O5K / / 2016
Operating instructions Contrast sensor O5K500 707 / 00 / 06 Contents Preliminary note. Symbols used Functions and features Installation. Installation conditions Operating and display elements 5 5 Electrical
More informationOperating instructions Diffuse reflection sensor with background suppression O1D101 O1D / / 2018
Operating instructions Diffuse reflection sensor with background suppression O1D101 O1D104 706114 / 00 02 / 2018 Contents 1 Preliminary note...3 1.1 Symbols used...3 1.2 Warning signs used...3 2 Safety
More informationMiniature resistance thermometer Model TR33, thread-mounted
Electrical temperature measurement Miniature resistance thermometer Model TR33, thread-mounted WIKA data sheet TE 60.33 Applications Machine building, plant and vessel construction Propulsion technology,
More informationOperating instructions Electronic pressure sensor. PF205x /00 06/2011
Operating instructions Electronic pressure sensor PF205x UK 706066/00 06/20 Contents Preliminary note...3. ymbols used...3 2 afety instructions...3 3 Functions and features...4 3. Applications...4 4 Function...4
More informationElectronic Temperature Transmitters
Electronic Temperature Transmitters ELECTRONIC TEMPERATURE TRANSMITTERS As with the pressure transmitters, HYDAC ELECTRONIC also has temperature transmitters appropriate for every application. The transmitters
More informationOriginal operating instructions Fail-safe inductive sensor GG507S
Original operating instructions Fail-safe inductive sensor GG507S 80236827 / 00 09 / 2016 Contents 1 Preliminary note...3 1.1 Symbols used...3 1.2 Warning signs used...3 2 Safety instructions...4 2.1 Safety-related
More informationOEM miniature resistance thermometer Models TR31-3 and TR31-K, thread-mounted
Electrical temperature measurement OEM miniature resistance thermometer Models TR31-3 and TR31-K, thread-mounted WIKA data sheet TE 60.31 Applications Machine building, plant and vessel construction Propulsion
More informationInstallation Instructions Electronic pressure sensor. PTD25-10-xxxxx PTD25-20-xxxxx
Installation Instructions Electronic pressure sensor PTD25-0-xxxxx PTD25-20-xxxxx 704954 / 00 / 200 Contents Safety instructions... 2 Function and features... 4 Installation... 5 Electrical connection...
More informationTT2780. Temperature head transmitter For resistance thermometers Pt100, settable using a PC, for installation in a sensor head Form B, BUZ, BUZ-H
Postal address: House address Fon (+49) 0 22 42-8703-0 Postbox 1261 Löhestr. 37 Fax (+49) 0 22 42-8703-20 http: // www.tematec.de 53759 Hennef 53773 Hennef e-mail: team@tematec.de TT2780 Data Sheet TT2780
More informationResistance thermometer Model TR31, miniature design
Electrical temperature measurement Resistance thermometer Model TR31, miniature design WIKA data sheet TE 60.31 Applications Machine building, plant and vessel construction Propulsion technology, hydraulics
More informationOriginal operating instructions Fail-safe inductive sensor GM504S / / 2010
Original operating instructions Fail-safe inductive sensor GM504S 704070 / 01 06 / 2010 Contents 1 Preliminary note 3 1.1 Explanation of symbols 3 2 Safety instructions 4 2.1 Safety-related requirements
More informationOperating instructions Magnetic-inductive flow meter FMM FMM FMM
Operating instructions Magnetic-inductive flow meter FMM50-1001 FMM75-1001 FMM100-1001 Scan or Click the above QR Code or go to https://www.automationdirect.com/vid-fl-0003 for a short quick start video.
More informationOptical laser distance sensors. Dimensioned drawing
ODSLR 96B Optical laser distance sensors Dimensioned drawing en 05-2012/11 50110336 60 2000mm 18-30 V DC We reserve the right to make changes DS_ODSLR96BMCV62000_en_50110336.fm Reflection-independent distance
More informationRTD Temperature Sensor omnigrad T -TSM 480, TR 480. Hygienic RTD sensor with Pt 100, class A TSM 480 with electronics programmable via PC
Technical Information TI 273T/02/en 60021667 RTD Temperature Sensor omnigrad T -TSM 480, TR 480 Hygienic RTD sensor with Pt 100, class A TSM 480 with electronics programmable via PC Application The Omingrad
More informationOperating instructions Electronic level sensor LK31xx
Operating instructions Electronic level sensor LK31xx UK 80264298/ 00 06 / 2017 Contents 1 Preliminary note...4 1.1 ymbols used...4 2 afety instructions...4 3 Functions and features...5 3.1 Application
More informationScrew-in resistance thermometers with plug connector
Data Sheet 90.2004 Page 1/7 s with plug connector for temperatures from -50 to +300 C highly resistant to shock and vibration connector locked in for reliable contact, IP65 or IP69K protection available
More informationOperating instructions Electronic level sensor LR / / 2012
Operating instructions Electronic level sensor LR3000 UK 706147 / 00 01 / 2012 Contents 1 Preliminary note...4 1.1 Symbols used...4 2 Safety instructions...4 3 Items supplied...5 4 Functions and features...6
More informationAnalogue Temperature Transmitter
TE 19.01 Electrical Temperature Measurement Analogue Temperature Transmitter Configurable Ranges, Head Mounting for Pt100 Resistance Thermometers for Thermocouples Applications Plant construction Power
More informationOriginal operating instructions Fail-safe inductive sensor GM705S
Original operating instructions Fail-safe inductive sensor GM705S 80236832 / 00 09 / 2016 Contents 1 Preliminary note...3 1.1 Symbols used...3 1.2 Warning signs used...3 2 Safety instructions...4 2.1 Safety-related
More informationomnigrad T - TSM 480, TR 480. Technical Information. RTD Temperature Sensor Hygienic design TSM 480 with electronics programmable via PC
Technical Information omnigrad T - TSM 480, TR 480 RTD Temperature Sensor Hygienic design TSM 480 with electronics programmable via PC Application areas The onmigrad T easytemp TSM 480 and TR 480 thermometers
More informationMiniature resistance thermometer Explosion-protected version Model TR34, thread-mounted
Electrical temperature measurement Miniature resistance thermometer Explosion-protected version Model TR34, thread-mounted WIKA data sheet TE 60.34 Applications Machine building, plant and vessel construction
More informationOperating instructions Flow sensor SAxx00 SAxx10 SAxx30 SAxx40
Operating instructions Flow sensor SAxx00 SAxx10 SAxx30 SAxx40 UK 80260078 / 00 01 / 2017 Contents 1 Preliminary note...4 2 Safety instructions...4 3 Functions and features...5 4 Function...5 4.1 Operating
More informationOperating instructions Diffuse reflection sensor with background suppression. OJ51xx laser / / 2010
Operating instructions Diffuse reflection sensor with background suppression OJ51xx laser 704811 / 00 05 / 2010 Contents 1 Preliminary note3 1.1 Symbols used 3 2 Safety instructions 3 3 Functions and features
More informationOperating instructions Electronic level sensor LR / / 2016
Operating instructions Electronic level sensor LR3000 UK 80236081 / 00 02 / 2016 Contents 1 Preliminary note...4 1.1 Symbols used...4 2 Safety instructions...4 3 Items supplied...5 4 Functions and features...7
More informationInstallation instructions SmartController XL CR / / 2014
Installation instructions martcontroller X 80003974 / 00 04 / 2014 martcontroller X Contents 1 Preliminary note................................................. 4 1.1 ymbols used...............................................
More informationDS 400 DS 400. Intelligent Electronic Pressure Switch Completely in Stainless Steel. piezoresistive stainless steel sensor
GmbH Postal address: House address Fon (+49) 0 22 42-870-0 Postbox 26 Löhestr. 7 Fax (+49) 0 22 42-870-20 http: // www.tematec.de 5759 Hennef 577 Hennef e-mail: team@tematec.de Data Sheet Page /5 Intelligent
More informationDigital Temperature Transmitters Model T12.10, Universally Programmable, Head Mounting Model T12.30, Universally Programmable, Rail Mounting
Electrical Temperature Measurement Digital Temperature Transmitters Model T12.10, Universally Programmable, Head Mounting Model T12.30, Universally Programmable, Rail Mounting WIKA Data Sheet TE 12.03
More informationOPTITEMP TT 20 Technical Datasheet
OPTITEMP TT 20 Technical Datasheet Analog PC-programmable two-wire transmitters for Pt100 Efficient PC-configuration without recalibration Very stable output Very fast response time The documentation is
More informationEY-EM 527: Remote I/O module, ecolink527
Product data sheet 94.078 EY-EM 527: Remote I/O module, ecolink527 How energy efficiency is improved Regulation, control, monitoring and optimisation of operational systems, e.g. room automation or HVAC
More informationPOSICHRON position sensor in stick design. Protection class. Voltage: V, 3 wire Current: ma, 3 wire
POSICHRON Position Sensor Stick Design with Analog Specifications POSICHRON position sensor in stick design Protection class IP67 Measurement range 0... 100 up to 0... 5750 mm Absolute position measurement
More informationTemperature Transmitters - Head Mounted
XTH Features - Non-programmable Models Sensor Types: Models for thermocouple Types J, K, or T Models for RTD Type Pt100 3-wire Select from a variety of pre-configured measuring ranges Internal cold junction
More informationIndoor, outdoor and duct resistance thermometers
Phone: 49 661 60030 Fax: 49 661 6003607 email: mail@jumo.net Phone: 44 1279 635533 Fax: 44 1279 635262 email: sales@jumo.co.uk 1800554JUMO Data Sheet 90.2523 Page 1/6 Indoor, outdoor and duct resistance
More informationOptical laser distance sensors. Dimensioned drawing
Dimensioned drawing en 02-2012/11 50118552 50 100mm 18-30 V DC We reserve the right to make changes DS_ODSL9L100_en_50118552.fm High resolution 0.01mm Reflection-independent distance information Highly
More informationTemperature head transmitter itemp PCP TMT 181
Technical information TI 070R/09/en Mat.-Nr.: 510 01110 Temperature head transmitter itemp PCP TMT 181 Universal head transmitter for resistance thermometers (RTD), thermocouples, resistance and voltage
More informationTemperature transmitter itemp PCP DIN rail TMT 121
Technical information TI 087R/09/en 510 03671 Temperature transmitter itemp PCP DIN rail TMT 121 Universal temperature transmitter for resistance thermometers (RTD), thermocouples, resistance and voltage
More informationJUMO Wtrans E01. Measuring probe for humidity, temperature, and CO 2 with wireless data transmission. Brief description. Universal Wtrans receiver
Page 1/13 JUMO Wtrans E01 Measuring probe for humidity, temperature, and CO 2 with wireless data transmission Humidity from 0 to 100 % RH (incl. -40 to +80 C) or CO 2 from 0 to 2000/5000/10000 ppm or Temperature
More informationSystem protection by Vibration monitoring
Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and heating Products Tunnel Fans System protection by Vibration monitoring for fans 2 Ventilatoren Vibration monitoring for fans
More informationOEM miniature resistance thermometer Models TR31-3 and TR31-K, thread-mounted
Electrical temperature measurement OEM miniature resistance thermometer Models TR31-3 and TR31-K, thread-mounted WIKA data sheet TE 60.31 further approvals see page 10 Applications Machine building, plant
More informationPressure measurement PBMR Fully welded pressure transmitter for railway applications
Fully welded pressure transmitter for railway Product highlights Ecellent accuracy and long term stability up to % FS Active temperature compensation over the entire operating temperature range Sensor
More informationElectronic Pressure Switch Type MEP
MAKING MODERN LIVING POSSIBLE Data sheet Electronic Pressure Switch Type MEP MEP 2200 and MEP 2250 versions: Dual output Output : Switch output Hysteresis % FS Time constant ms Output 2: Analogue output
More information0 2 1 â Ó. itemp HART TMT182. Technical Information
Technical Information itemp HART TMT182 Temperature head transmitter Head transmitter for resistance thermometers (RTD), thermocouples (TC), resistance and voltage transmitters (mv), HART -protocol, for
More informationTechnical Information itemp TMT180
TI00088R/09/EN/14.16 71315611 Technical Information itemp TMT180 Temperature head transmitter for resistance thermometers Pt100 Configurable using a PC, for installation in a terminal head, form B Application
More informationUSER S MANUAL. Rail-mounted temperature transmitter ATL
IO.ATL (ENG) USER S MANUAL Rail-mounted temperature transmitter ATL APLISENS S.A., 03-192 Warszawa, ul. Morelowa 7 tel. +48 22 814 07 77; fax +48 22 814 07 78 www.aplisens.pl, e-mail: aplisens@aplisens.pl
More informationResistance thermometer Model TR30, compact design
Electrical temperature measurement Resistance thermometer Model TR30, compact design WIKA data sheet TE 60.30 Applications Machine building, plant and vessel construction Propulsion technology, hydraulics
More informationAnalogue temperature transmitter Model T91.10, head mounting version DIN form B Model T91.20, head mounting version form J
Electrical temperature measurement Analogue temperature transmitter Model T91.10, head mounting version DIN form B Model T91.20, head mounting version form J WIKA data sheet TE 91.01 for further approvals
More informationTechnical data Model F1301 F13C1 ATEX/IECEX 2) F13C1 (Option) Nominal load F nom 10 / 20 / 30 / 50 / 100 / 200 kn 10 / 20 / 30 / 50 / 100 / 200 kn 10
Compression force transducer with Thin-film sensor Accuracy: 1 % Output signal: 4...20 ma; 2-wire, 0...10 VDC; 3-wire Optional Optional ATEX/IECEX II 2G Ex ib IIC T4/T3 for SIL3-Applications with 2-channel
More informationTemperature Transmitters - DIN Rail Mounted
XTD Features - Non-programmable Models Sensor Types: Models for thermocouple Types J, K, or T Models for RTD Type Pt100 3-wire Select from a variety of pre-configured measuring ranges Internal cold junction
More informationPressure Transmitter SIL
Pressure Transmitter SI Characteristics - TRANSDUCER - Pressure: Range: Output: Accuracy: Temperature of medium: Material enclosure: Pressure connection: Electrical connection: Protection: relative / absolute
More informationPressure transmitter for general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter for general industrial applications Model A-10 WIKA data sheet PE 81.60 Applications Machine building Machine tools Measurement and control technology
More informationph or ORP Transmitter
ph or ORP Transmitter Programmable outputs: two transistor and single or dual analog 4-20 ma (Process + Temp) Removable backlighted display Universal process connection Compatible with 120 mm ph/ ORP probes
More informationResistance thermometer Model TR30, compact design
Electrical temperature measurement Resistance thermometer Model TR30, compact design WIKA data sheet TE 60.30 Applications Machine building, plant and vessel construction Propulsion technology, hydraulics
More informationDMP 343. Industrial Pressure Transmitter. Without Media Isolation. appmeas.co.uk +44 (0)
DMP 4 Industrial Pressure Transmitter Without Media Isolation accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 0 mbar up to 0... 000 mbar Product characteristics excellent linearity
More information0 2 1 â Ó. itemp HART TMT182. Technical Information
Technical Information itemp HART TMT182 Temperature head transmitter Head transmitter for resistance thermometers (RTD), thermocouples (TC), resistance and voltage transmitters (mv), HART -protocol, for
More informationOptical laser distance sensors. Dimensioned drawing
Dimensioned drawing en 02-2012/11 50112361 150 800mm 10-30 V DC We reserve the right to make changes DS_ODSL96BS800_en_50112361.fm Small laser light spot for measurements on small, structured or metallic
More informationSmart Power Relay E I...
Smart Power Relay E-48-8I... Description The Smart Power Relay E-48-8I.- is a remotely controllable electronic load disconnecting relay with three functions in a single unit: l electronic relay l electronic
More informationHigh-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals
Accessories High-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals WIKA data sheet AC 80.03 Applications Machine building
More informationAdditel 875 Series Dry Well Calibrators
Additel 875 Series Dry Well Calibrators Three models ranging from -40 to 660 Portable, rugged, and quick to temperature Metrology-level performance in stability, uniformity, accuracy and loading effect
More informationPressure transmitter for general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter for general industrial applications Model A-10 WIKA data sheet PE 81.60 Applications Machine building Machine tools Measurement and control technology
More informationResistance thermometer Model TR30, compact design
Temperature Resistance thermometer Model TR30, compact design WIKA data sheet TE 60.30 for further approvals see page 8 Applications Machine building, plant and vessel construction Propulsion technology,
More informationInstallation instructions BasicController CR0401 CR / / 2012
Installation instructions BasicController CR0401 CR0403 7390824 / 00 01 / 2012 Contents 1 Preliminary note................................................. 4 1.1 Symbols used...............................................
More informationTemperature head transmitter itemp PCP TMT 181
Technical information TI 070R/09/en Mat.-Nr.: 510 01110 Temperature head transmitter itemp PCP TMT 181 Universal head transmitter for resistance thermometers (RTD), thermocouples, resistance and voltage
More informationTemperature Transmitter itemp RTD DIN rail TMT 127
Technical Information TI 095R/09/en No. 51004790 Temperature Transmitter itemp RTD DIN rail TMT 127 Temperature Transmitter for Pt100 Resistance Thermometer Application Temperature transmitter with fixed
More informationTechnical data. General specifications. Measurement range min max. 360
Model Number Features Very small housing High climatic resistance 12 Bit singleturn Analog output Surge and reverse polarity protection Description This absolute rotary encoder with internal magnetic sampling
More informationfor installation into terminal head form B and for installation on DIN rail Output signals : 4 to 20 ma : 4 to 20 ma 0 to 10 V
sales@jumo.co.uk info.us@jumo.net Page 1/12 JUMO dtrans T0 Programmable twowire transmitter for installation into terminal head form B and for installation on DIN rail Brief description The transmitters
More informationNOVOHALL Rotary Sensor non-contacting. Series RSC2800 analog
NOVOHALL Rotary Sensor non-contacting Series RSC2800 analog The RSC 2800 sensor utilizes a contactless magnetic measurement technology to determine the measured angle. Unlike conventional Hall sensors,
More informationInstallation instructions for encoders. RM3xxx RM7xxx RN3xxx RN7xxx /02 08/2015
Installation instructions for encoders RMxxx RM7xxx RNxxx RN7xxx 897/ 8/ Contents Preliminary note.... Notes on this document.... Symbols used... Safety instructions.... General.... Installation and connection...
More informationTemperature Transmitters TMT 136, TMT 137
Technical Information TI 066R/09/en Part No. 51000855 Temperature Transmitters TMT 136, TMT 137 For Pt100 Resistance Thermometers 2-wire head transmitter Standard- and instrinsically safe versions Head
More information2-WiRE LEvEL TRansmiTTER PRELEvEL 5343 ConTEnTs
2-wire level transmitter PRelevel 5343 Contents EC declaration of conformity... 14 Application... 15 Technical characteristics... 15 Mounting / installation... 15 Applications... 16 Electrical specifications...
More informationPOSICHRON position sensor in a stainless steel pressure case. Voltage: V, 3 wire Current: ma, 3 wire
Rod Profile with Analog Specifications POSICHRON position sensor in a stainless steel pressure case Protection class IP68 Compression-proof up to 15 bar Measurement range 0... 100 to 0... 5750 mm Absolute
More informationDigital flowmeter for continuous flow measurement
8025 Flowmeter INSERTION Digital flowmeter for continuous flow measurement Compact or remote version for DN06 to DN400, PN10 Displays both flow rate and volume (with two totalizers) On site calibration
More informationWS12EX Position Sensor with Analog output Dust explosion-proof
Sensor for Hostile Environments Class IP67 Measurement Range: 0... 100 mm to 0... 3000 mm With Analog Output Dust Ex proof, category 3, zone 22 II 3D EEx T80 C IP67 Specifications Outputs Material Resolution
More informationDigital flowmeter for continuous flow measurement
8025 Flowmeter INSERTION Digital flowmeter for continuous flow measurement Compact or remote version for DN06 to DN400, PN10 Displays both flow rate and volume (with two totalizers) On site calibration
More informationTemperature Transmitters
Temperature Transmitters measuring monitoring analysing KM O O Wide supply voltage range: 7.5... 5 V DC O O Operation, visualisation and maintenance via PC Universal setting with HART protocol T O O Fault
More informationElectronic temperature switch with display Model TSD-30
Electrical temperature measurement Electronic temperature switch with display Model TSD-30 WIKA data sheet TE 67.03 Applications Machine tools Hydraulic power packs Coolant and lubrication systems Machine
More informationOperator Manual. Transmitters Series KAT-... Analog transmitters in 2-wire technique
Operator Manual Transmitters Series KAT-... Analog transmitters in 2-wire technique Important Safety Notes! In the case of non-observance of the installation and safety notes or improper use of the transmitter
More informationJUMO dtrans T04 Four-wire Transmitter, settable via DIP switch/pc setup program
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
More informationPower supply CP-D 24/4.2 Primary switch mode power supply
Data sheet Power supply CP-D 24/4.2 Primary switch mode power supply The CP-D range of modular power supply units in MDRC design (modular DIN rail components) is ideally suited for installation in distribution
More informationOutside Temperature Sensors
1 814 1814P01 Symaro Outside Temperature Sensors QAC31 Active sensors for acquiring the outside temperature Operating voltage AC 24 V or DC 13535 V Signal output DC 010 V or 420 ma Use The QAC31 outside
More informationOEM pressure transmitter for general industrial applications Models O-10 (T), O-10 (5)
Electronic pressure measurement OEM pressure transmitter for general industrial applications Models O-10 (T), O-10 (5) WIKA data sheet PE 81.65 Applications Hydraulics and pneumatics Pumps and compressors
More informationPROGRAMMABLE FIELD TEMPERATURE TRANSMITTER
Configuration Code TM01 Series 642 Programmable HART Field Temperature The Series 642 programmable HART field temperature transmitter is a 2-wire unit with analog output. It includes input for RTDs; resistance
More informationDMP 343. Industrial Pressure Transmitter. Without Media Isolation. accuracy according to IEC 60770: 0.35 % FSO. Nominal pressure
DMP 4 Industrial Pressure Transmitter Without Media Isolation accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 0 mbar up to 0... 000 mbar Product characteristics excellent linearity
More informationValve Island with Electronic I/O
Screw in Temperature /Switch with display for ON/OFF Control Indication, monitoring, transmission and ON/OFF control in one device Extra large display Menu guided parametrisation Complete communication
More informationINSERTION paddle wheel flowmeter for continuous flow measurement
INSERTION paddle wheel flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both
More informationJUMO ecotrans Lf 03 Microprocessor Transmitter / Switching Device for conductivity or resistivity and temperature
Data Sheet 20272 Page /7 JUMO ecotrans Lf 0 Microprocessor Transmitter / Switching Device for conductivity or resistivity and temperature Type 20272 Housing for DIN rail mounting (5 x 7.5 mm to DIN EN
More informationJUMO Dtrans T100 Screw-in RTD Temperature Probe with/without Transmitter
ata Sheet 902815 Page 1/13 JUMO trans T100 Screw-in RT Temperature Probe with/without Transmitter For temperatures between -50 and +260 C RoHS conformity for EU and China Configuration with setup program
More informationOEM pressure sensor For industrial applications Models O-10 (T), O-10 (5)
Pressure OEM pressure sensor For industrial applications Models O-10 (T), O-10 (5) WIKA data sheet PE 81.65 for further approvals see page 11 Applications Hydraulics and pneumatics Pumps and compressors
More informationDigital temperature transmitter for resistance sensors Model T15.H, head mounting version Model T15.R, rail mounting version
Temperature Digital temperature transmitter for resistance sensors Model T15.H, head mounting version Model T15.R, rail mounting version WIKA data sheet TE 15.01 for further approvals see page 10 Applications
More information