MODEL VXIbus UNIVERSAL METER. Page 1 of 5

Transcription

1 Page of 5 MODEL 5854 VXIbus UNIVERSAL POWER METER UNIVERSAL POWER MEASUREMENT Introducing the 5854 Universal Power Meter. The lastest member of the Giga-tronics family of innovative VXIbus microwave test and measurement solutions. Now, for the very first time, you can get NIST traceable, lab grade CW and peak power measurements quickly and accurately from a singleslot VXIbus module. POWER MEASUREMENTS INSTANTLY The Giga-tronics 5854 is te fastest VXI power meter available. Measurement speeds exceed 5 readings per second, and our exclusive Burst Mode captures more than 5, readings in the same tick of a clock. In fact, the 5854 is so fast you can measure the power level of many swept signals, giving you the capability of a scalar analyzer without the addtional cost. Because the 5854 supports the scpi command language the standard for VXI computer controlled testing. Think about what all this will do for your ATE productivity as well as for your company s bottom line. FAST, EASY PEAK POWER MEASUREMENT The 5854 is the only VXI meter that lets you measure peak power directly. And it s as simple as attaching a peak power sensor. There are no time-consuming, unreliable duty cycle corrections.view the pulsed signal s amplitude profile on a scope and see the exact power measurement point on the pulse. THE SECRET IS THE SENSORS The Giga-tronics 5854 Universal Power Meter delivers incredible performance by taking full advantage of the speed and dynamic range of diode sensors. Giga-tronics has solved the challenge that previously limited diode sensors to the square law region below - dbm by utilizing a builtin power sweep calibration system. The power sweep calibrator uses a 5 MHz amplitude controlled oscillator to step from -3 to + dbm in db increments. Each step is set using an internal thermistor the standard for linearity. You get thermistor linearity, plus diode speed and dynamic range, for measuring signals

2 Giga-tronics Model 5854 VXIbus Uniersal Power Meter Page of 5 accurately over a full 9 db power range. And for incredible versatility, we offer a full range of CW and Peak sensor tailored to your spsecific needs. Our sensors cover frequency ranges from MHz to 4 GHz with up to 9 db dynamic range.there are to 5 Watt high power sensors, too. Use our diode-based True RMS sensors to accurately measure quadrature modulated signals, intermodulation distortion power and db gain compression. Use our Low VSWR sensor for unequalled CW measurement accuracy. Or connect a Precision Return Loss Bridge and measure Return Loss or VSWR using only a single channel. TWO CHANNEL OPERATION The 5854 provides two channel operation, so you can see readings from both channels simultaneously. Use one channel for CW and the other for peak measurements, and see both readings at the same time. Or read one channel in db and the other in mw for measuring gain and output power simultaneously. With all you ve got to do, imagine the ti you ll save. Accuracy Audit Assume the power meter is being used to measure the output power at GHz from a source with a VSWR=.5:. Displayed power level is -5 dbm. Noise and mismatch calculations assume Standard CW Power Sensors. Worst RSS Case System Linearity at 5 MHz.5%.5% Power Linearity at -5 dbm and GHz.%.% Calibrator Uncertainty at 5 MHz.%.% Calibrator/Sensor Mismatch at 5 MHz.3%.3% Calibration Factor Uncertainty at GHz.9% 3.6% Zero Error.6%.6% Noise.6%.6% Mismatch (Sensor/Source) 4.% 4.% Total 4.6% 9.6%

3 Giga-tronics Model 5854 VXIbus Uniersal Power Meter Page 3 of 5 Giga-tronics CW Power Sensor Selection Guide mw CW Power Sensors 83A MHz to 8 GHz +3 dbm ( mw) 7 to dbm: ±. db Type N(m) 4.5 mm 3 mm.8 kg.:. - GHz 7 to + dbm to + dbm: ±.5 db/ db 5Ω (4.5 in) (.5 in) (.4 lb).: -.4 GHz 83A MHz to 8 GHz +3 dbm ( mw) 7 to dbm: ±. db APC mm 3 mm.8 kg.9:.4-8 GHz 7 to + dbm to + dbm: ±.5 db/ db 5Ω (4.5 in) (.5 in) (.4 lb) 833A MHz to 6.5 GHz +3 dbm ( mw) 7 to dbm: ±. db Type K(m) 4.5 mm 3 mm.8 kg.:. - GHz 7 to + dbm to + dbm: ±. db/ db 5Ω (4.5 in) (.5 in) (.4 lb).: -.4 GHz 834A MHz to 4 GHz +3 dbm ( mw) 7 to dbm: ±. db Type K(m) 4.5 mm 3 mm.8 kg.38:.4-8 GHz 7 to dbm to dbm: ±. db/ db 5Ω (4.5 in) (.5 in) (.4 lb).43: GHz.9: GHz Low VSWR CW Power Sensors 83A MHz to 8 GHz +9 dbm (8 mw) 64 to 4 dbm: ±. db Type K(m) 7 mm 3 mm.3 kg.3:. - GHz 64 to +6 dbm 4 to +6 dbm: ±.5 db/ db 5Ω (5. in) (.5 in) (.5 lb).6: - GHz 833A MHz to 6.5 GHz +9 dbm (8 mw) 64 to 4 dbm: ±. db.3: - 8 GHz 64 to +6 dbm 4 to +6 dbm: ±. db/ db.9: GHz 834A MHz to 4 GHz +9 dbm (8 mw) 64 to 4 dbm: ±. db.5: GHz 64 to +6 dbm 4 to +6dBm: ±. db/ db W CW Power Sensors 83A MHz to 8 GHz +3 dbm ( W) 6 to dbm:±. db Type K(m) 7 mm 3 mm.3 kg.:. - GHz 6 to +3 dbm to +3 dbm: ±.5 db/ db 5Ω (5. in) (.5 in) (.5 lb).: - GHz 833A MHz to 6.5 GHz +3 dbm ( W) 6 to dbm: ±. db.8: - 8 GHz 6 to +3 dbm to +3 dbm: ±. db/ db.: GHz 834A MHz to 4 GHz +3 dbm ( W) 6 to dbm: ±. db.36: GHz 6 to + dbm to + dbm: ±. db/ db 5 W CW Power Sensor 83A MHz to 8 GHz +37 dbm (5 W) 5 to dbm: ±. db Type N(m) 5 mm 3 mm.3 kg.:. - 6 GHz 5 to +37 dbm to +37 dbm: ±.5 db/ db 5Ω (5.9 in) (.5 in) (.5 lb).5: GHz.35:.4-8 GHz 5 W CW Power Sensor 3 83A MHz to 8 GHz +44 dbm (5 W) 4 to + dbm: ±. db Type N(m) 3 mm 4 mm.3 kg.:. - 6 GHz 4 to +44 dbm + to +44 dbm: ±.5 db/ db 5Ω (9. in) (4. in) (.6 lb).3: GHz.4:.4-8 GHz 5 W CW Power Sensor 3 835A MHz to 8 GHz +47 dbm (5 W) 4 to + dbm: ±. db Type N(m) 3 mm 4 mm.3 kg.5:. - 6 GHz 4 to +47 dbm + to +47 dbm: ±.5 db/ db 5Ω (9. in) (4. in) (.6 lb).35: GHz.45:.4-8 GHz Giga-tronics True RMS Sensors Selection Guide (f m >.5 MHz) True RMS Sensors (-3 dbm to + dbm) 833A MHz to 8 GHz +33 dbm ( W) 3 to + dbm: ±. db Type K(m) 5 mm 3 mm.7 kg.:. - GHz 8333A MHz to 6.5 GHz 5Ω (6. in) (.5 in) (.6 lb).5: - 8 GHz 8334A MHz to 4 GHz.8: GHz.9: GHz Giga-tronics Bridge Selection Guide Power Range Power (Frequency > 8 GHz) Input Test Port Directivity Weight VSWR Precision CW Return Loss Bridges 85 MHz to 8 GHz +7 dbm (.5 W) 35 to + dbm: ±. db Type N(f) Type N(f) 38 db.34 kg <.7:. - 8 GHz 35 to + dbm + to + dbm: ±. db 5Ω 5Ω <.7: 8-8 GHz ±.5 db/db 854 MHz to 4 GHz +7 dbm (.5 W) 35 to + dbm: ±. db Type K(f) Type K(f) 3 db.98 kg <.35: GHz 35 to + dbm + to + dbm: ±. db 5Ω 5Ω <.44: GHz ±.5 db/db The K connector is electrically and mechanically compatible with the APC-3.5 and SMA connectors. Note: Use a Type N(m) to SMA(f) adapter (part no. 9835) for calibration of power sensors with Type K(m) connectors. Power coefficient equals <. db/watt. 3 Power coefficient equals <.5 db/watt. 4 For frequencies above 8 GHz, add power linearity to system linearity. 5 Power coefficient equals <. db/watt (Average). 6 Power coefficient equals <.5 db/watt (Average). 7 Peak operating range above CW maximum range is limited to <% duty cycle. 8 Square root of the sum of the individual uncertainties squared (RSS). 9 Cal Factor numbers allow for 3% repeatability when reconnecting attenuator to sensor and 3% for attenuator measurement uncertainty and mismatch of sensor/pad combination.

4 Giga-tronics Model 5854 VXIbus Uniersal Power Meter Page 4 of 5 Giga-tronics Peak Power Sensor Selection Guide mw Peak Power Sensors 835A 45 MHz to 8 GHz +3 dbm ( mw) 3 to dbm: ±. db Type N(m) 65 mm 37 mm.3 kg.:.45 - GHz to + dbm, Peak CW or Peak to + dbm: ±.5 db / db 5Ω (6.5 in) (.5 in) (.7 lb).: -.4 GHz 3 to + dbm, CW.37:.4-8 GHz 8353A 45 MHz to 6.5 GHz +3 dbm ( mw) 3 to dbm: ±. db Type K(m) 65 mm 37 mm.3 kg.5: GHz to + dbm, Peak CW or Peak to + dbm: ±. db / db 5Ω (6.5 in) (.5 in) (.7 lb).9: GHz 3 to + dbm, CW 8354A 45 MHz to 4 GHz +3 dbm ( mw) 3 to dbm: ±. db Type K(m) 65 mm 37 mm.3 kg to +. dbm, Peak CW or Peak to. dbm: ±. db / db 5Ω (6.5 in) (.5 in) (.7 lb) 3 to +. dbm, CW 5 W Peak Power Sensor 5, 7 835A 45 MHz to 8 GHz CW: +37 dbm to + dbm: ±. db Type N(m) mm 37 mm.3 kg.5:.45-4 GHz to +4 dbm, Peak (5 W Average) + to +4 dbm: ±.5 db / db 5Ω (7.9 in) (.5 in) (.7 lb).5: GHz to +37 dbm, CW Peak: +43 dbm.35:.4-8 GHz 5 W Peak Power Sensor 6, 7 835A 45 MHz to 8 GHz CW: +44 dbm. to + dbm: ±. db Type N(m) 8 mm 4 mm.3 kg.:.45-6 GHz + to +5 dbm, Peak (5 W Average) + to +5 dbm: ±.5 db / db 5Ω (. in) (4. in) (.7 lb).3: GHz. to +44 dbm, CW Peak: +53 dbm.4:.4-8 GHz 5 W Peak Power Sensor 6, A 45 MHz to 8 GHz CW: +47 dbm. to + dbm: ±. db Type N(m) 8 mm 4 mm.3 kg.5:.45-6 GHz + to +5 dbm, Peak (5 W Average) + to +5 dbm: ±.5 db / db 5Ω (. in) (4. in) (.7 lb).35: GHz. to +47 dbm, CW Peak: +53 dbm.45:.4-8 GHz Sensor Calibration Factor Uncertainties Frequency (GHz) Root Sum of Squares (RSS) Uncertainties(%) 8 833A 83A 834A 83A 83A 83A 9 833A 83A 8353A 833A 833A 83A A Lower Upper 835A 8354A 834A 834A 835A A The K connector is electrically and mechanically compatible with the APC-3.5 and SMA connectors. Note: Use a Type N(m) to SMA(f) adapter (part no. 9835) for calibration of power sensors with Type K(m) connectors. Power coefficient equals <. db/watt. 3 Power coefficient equals <.5 db/watt. 4 For frequencies above 8 GHz, add power linearity to system linearity. 5 Power coefficient equals <. db/watt (Average). 6 Power coefficient equals <.5 db/watt (Average). 7 Peak operating range above CW maximum range is limited to <% duty cycle. 8 Square root of the sum of the individual uncertainties squared (RSS). 9 Cal Factor numbers allow for 3% repeatability when reconnecting attenuator to sensor and 3% for attenuator measurement uncertainty and mismatch of sensor/pad combination.

5 Giga-tronics Model 5854 VXIbus Uniersal Power Meter Specifications Page 5 of 5 Specifications describe the instrument s warranted performance, and apply when using 83A Series Power Sensors. Typical performance, (shown in italics), is non-warranted. METER Frequency Range: MHz to 4 GHz Power Range: -7 dbm to +47 dbm ( pw to 5 Watt) Single Sensor Dynamic Range: CW Power Sensors: 9 db Peak Power Sensors: 4 db, Peak 5 db, CW ACCURACY Calibrator:Power Sweep calibration signal to dynamically linearize the sensors. Frequency: 5 MHz, nominal. Settability: The mw (. dbm) level in the Power Sweep Calibrator is factory set to ±.7% traceable to the NIST.. dbm Accuracy: ±.% worst case for one year, over temperature range of 5 to 35 C. Connector: Type N(f) connector, 5 Ω. VSWR: <.5 (Return Loss >33 db). System Linearity at 5 MHz for Standard CW Sensors: ±. db over any db range from -7 to +6 dbm. ±. db + (+, -.5 db/db) from +6 to + dbm. ±.4 db from -7 to +6 dbm. 83A A A A A A A -3-84A, 86A (CW) SENSORS TYPICAL ERROR (db) Input, (dbm) Graph shows linearity plus zero set and noise vs. input power Zeroing Accuracy: (Standard CW Sensors) Zero Set: <±5 pw Zero Drift: <± pw during hour Noise Uncertainty: <±5 pw measured over a minute interval. MEASUREMENT SPEED Measurement speed increases significantly using data storage capabilities. Storing data in the power meter s memory for later down loading to your controller reduces word serial protocol and protocol conversion overhead. Up to 8, readings can be buffered. The table below illustrates typical maximum measurement rates for 83 Series Peak Power Sensors. Measurement rate depends on several factors including controller speed and number of averages. Burst Mode speed shown does not include bus communication time. Normal Mode Swift Mode Burst Mode Non-Buffered Buffered Data Buffered Data 55 rdgs/s 5 rdgs/s 5 rdgs/s Data is read immediately after measurement in Normal Mode. Swift Mode allows triggering of individual data points, and stores the data in the 5854 s memory. Burst Mode also buffers measurement data. Triggering is controlled by setting the time interval between measurements. FRONT PANEL CONNECTIONS Analog Output: Provides an output voltage con figurable in either Lin or Log units. Normal Mode. Trigger Input: Used to connect EXT trigger. Swift and Burst Modes Voltage proportional to Frequency: Allows automated Cal Factor correction. Input the analog VpropF signal level from the microwave source. Normal Mode. RETURN LOSS BRIDGES Return Loss Bridge Frequency Response: Use the standard Open/Short supplied with the bridge to frequency compensate 5854 return loss and VSWR measurements. Bridge Insertion Loss: 6.5 db, nominal, from input port to test port. Measurement Error (db) Graph shows Bridge Linearity of the GENERAL SPECIFICATIONS Temperature Range: Operating: to 5 C (+3 to + F) Storage: -4 to 7 C (-4 to +58 F) Power Requirements: +5 8 ma +4 5 ma -4 5 ma Physical Characteristics: Dimensions: C-size, single slot VXI standard 3 mm (. in) wide, 34 mm (9. in) high, 34 mm (3.4 in) deep. Weight:.5 kg (5.5 lbs) ORDERING INFORMATION ACCESSORIES One Operation and Maintenance Manual and two detachable sensor cables are included. OPTIONS Add 8K buffer for fast measurements. Stores 8K single channel readings or 64K each dual channel. Depending on sensor used. MAP (Modulated Average Power), PAP (Pulse Average Power), BAP (Burst Average Power). Specifications subject to change without notice. 996 Giga-tronics Incorporated GT-79-B Giga-tronics Incorporated 465 Norris Canyon Road San Ramon, California Telephone: or Telefax: Web Site: