400 W Surface Mount Transient Voltage Suppressor

Transcription

1 DO-AC (SMA) Voltage 6.8 V to 540 V (Uni) 6.8 V to 260 V (Bid) Power 400 W /ms (0W above 2 V) R Maximun Ratings and Electrical Characteristics at 25 C FEATURES Low profile package Ideal for automated placement 400 W peak pulse power capability with a 0/000 µs waveform, repetitive rate (duty cycle): 0.0 % Excellent clamping capability Very fast response time Low incremental surge resistance Available in uni-directional and bi-directional Solder dip 260ºC, 0s AEC-Q0 qualified Component in accordance to RoHS /65/EU and WEEE 2/96/EC Meets MSL level, per J-STD-0, LF maximum peak of 260º C Halogen-free available according to IEC definition MECHANICAL DATA Case: DO-AC (SMA). Epoxy meets UL 94V-0 flammability rating. Polarity: For unidirectional types color band denotes cathode end. No marking on bidirectional types. Terminals: Matte tin plated leads, solderable per MIL-STD-7 Method 26, J-STD-002 and JESD-B02. Consumer grade, meets JESD class A whisker test. HE3 suffix for high reliability grade, meets JESD class 2 whisker test. TYPICAL APPLICATIONS Used in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive and telecommunication. P PPM Peak Pulse Power Dissipation with 0/000 µs exponential pulse (Note 3) 400 W, 0W I FSM Peak Forward Surge Current 8.3 ms. (Jedec Method) (Note ) (Note 2) 40 A V F Max. forward voltage drop at I F = 25 A (Note ) 3.5 V T j Operating temperature range V BR 43 V V BR > 43 V 65 to + C 65 to + C T stg Storage temperature range 65 to + C Notes:. Only for Unidirectional 2. Mounted on 0.3 x 0.3" (8.0 x 8.0 mm) copper pads to each terminal 3. Rating is 0W above 2V. Version: May-4 Page Number: /8

2 Ordering information PREFERRED P/N PACKAGE CODE DELIVERY MODE BASE QUANTITY UNIT WEIGHT (g) P4SMAA TRTB P4SMAA TRTS PSMAA HE3 TRTB P4SMAA HE3 TRTS TRTB 3" diameter tape and reel 7, TRTS 7" diameter tape and reel, TRTB 3" diameter tape and reel 7, TRTS 7" diameter tape and reel, P4MAA HF TRTB TRTB 3" diameter tape and reel 7, P4SMACA TRTB P4SMACA TRTS P4SMACA HE3 TRTB TRTB 3" diameter tape and reel 7, TRTS 7" diameter tape and reel, TRTB 3" diameter tape and reel 7, P4SMACA HE3 TRTS TRTS 7" diameter tape and reel, P4SMACA HF TRTB TRTB 3" diameter tape and reel 7, Package Outline Dimensions: (mm) DO-AC (SMA) 5. ± ± ± ± ± ±0. Week code Mounting Pad Layout MC WW Y 2.6 ±0.3 2 Marking code Year code Version: May-4 Page Number: 2/8

3 Type Unidirectional P4SMA6V8 P4SMA6V8A P4SMA7V5 P4SMA7V5A P4SMA8V2 P4SMA8V2A P4SMA9V P4SMA9VA P4SMA0 P4SMA0A P4SMA P4SMAA P4SMA2 P4SMA2A P4SMA3 P4SMA3A P4SMA5 P4SMA5A P4SMA6 P4SMA6A P4SMA8 P4SMA8A P4SMA P4SMAA P4SMA P4SMAA P4SMA P4SMAA P4SMA P4SMAA P4SMA P4SMAA P4SMA P4SMAA P4SMA P4SMAA P4SMA39 P4SMA39A () Tested with pulses. Pulse test: tp ms; d < 2% Marking Code AD AE AF AG AH AK AL AM AN AP AQ AR AS AT AU AV AW AX AY AZ BD BE BF BG BH BK BL BM BN BP BQ BR BS BT BU BV BW BX Maximum Reverse () Breakdown Voltage Max. Clamping Voltage Leakage Current V BR at I R V CL at I PP I RM at V RM max. ms. Expo. (µa) Min Nom Max (ma) (A) Version: May-4 Page Number: 3/8

4 Type Unidirectional P4SMA43 P4SMA43A P4SMA47 P4SMA47A P4SMA5 P4SMA5A P4SMA56 P4SMA56A P4SMA62 P4SMA62A P4SMA68 P4SMA68A P4SMA P4SMAA P4SMA82 P4SMA82A P4SMA9 P4SMA9A P4SMA00 P4SMA00A P4SMA0 P4SMA0A P4SMA P4SMAA P4SMA P4SMAA P4SMA P4SMAA P4SMA60 P4SMA60A P4SMA70 P4SMA70A P4SMA80 P4SMA400A P4SMA440A P4SMA480A P4SMAA Marking Code BY BZ CD CE CF CG CH CK CL CM CN CP CQ CR CS CT CU CV CW CX CY CZ DD DE DF DG DH DL DM DN DP DQ DR DJ DK WJ WL Maximum Reverse () Breakdown Voltage Max. Clamping Voltage Leakage Current V BR at I R V CL at I PP I RM at max. ms. Expo. (µa) V RM Min. Nom. Max. (ma) (A) P4SMA80A P4SMA P4SMAA P4SMA0 P4SMA0A P4SMA2A DS DT DU DV DX DW P4SMA0A DY P4SMA3A DZ P4SMA540A WN () Tested with pulses. Pulse test: tp ms; d < 2% Version: May-4 Page Number: 4/8

5 400 W Surface Mount Transient Voltage Suppressor Maximum Reverse () Breakdown Voltage Max. Clamping Voltage Leakage Current V V at I CL BR at I pp Type R I RM at V RM max. ms. Expo. Bidirectional Marking Code (µa) Min. Nom. Max. (ma) (A) P4SMA6V8C P4SMA6V8CA P4SMA7V5C P4SMA7V5CA P4SMA8V2C P4SMA8V2CA P4SMA9VC P4SMA9VCA P4SMA0C P4SMA0CA P4SMAC P4SMACA P4SMA2C P4SMA2CA P4SMA3C P4SMA3CA P4SMA5C P4SMA5CA P4SMA6C P4SMA6CA P4SMA8C P4SMA8CA P4SMAC P4SMACA P4SMAC P4SMACA P4SMAC P4SMACA P4SMAC P4SMACA P4SMAC P4SMACA P4SMAC P4SMACA P4SMAC P4SMACA P4SMA39C P4SMA39CA RB () Tested with pulses. Pulse test: tp ms; d < 2% RA RC RD RE RF RG RH RI RJ RK RL RM RN RO RP RR RS RT RU RV CC RX RY RZ SA SB SC SD SE SF SG SH SI SJ SK SL SM Version: May-4 Page Number: 5/8

6 Maximum Reverse () Breakdown Voltage Max. Clamping Voltage Leakage Current V I V at CL BR at I pp Type R I RM at V RM max. ms. Expo. Bidirectional Marking Code (µa) Min. Nom. Max. (ma) (A) P4SMA43C SN P4SMA43CA P4SMA47C P4SMA47CA P4SMA5C P4SMA5CA P4SMA56C P4SMA56CA P4SMA62C P4SMA62CA P4SMA68C P4SMA68CA P4SMAC P4SMACA P4SMA82C P4SMA82CA P4SMA9C P4SMA9CA P4SMA00C P4SMA00CA P4SMA0C P4SMA0CA P4SMAC P4SMACA P4SMAC P4SMACA P4SMAC P4SMACA P4SMA60C P4SMA60CA P4SMA70C P4SMA70CA P4SMA80C P4SMA80CA P4SMAC P4SMACA P4SMA0C P4SMA0CA P4SMA2C P4SMA2CA SO SP SR SS CA ST CB SU CI SW UY SY SZ WA PB WC PC WE CJ WG PJ WI PO WK NA WM NB WO NC WR NI WT NO WV MA WX MB MI MJ P4SMA260CA MO () Tested with pulses. Pulse test: tp ms; d < 2% Version: May-4 Page Number: 6/8

7 Peak Pulse Power (P PP ) or Current (I PP ) Derating in Percentage, % 400 W Surface Mount Transient Voltage Suppressor Ratings and Characteristics (Ta 25 ºC unless otherwise noted) Ipp, Peak Pulse Current - % Ipp 00 I pp I pp / VBR 43 V VBR > 43 V 0 µs t - time T J - Initial Temperature ( C) ms Pulse wave form 0/000 Pulse Power or Current vs. Initial Junction Temperature PEAK PULSE POWER RATING CURVE TYPICAL JUNCTION CAPACITANCE Ppp, - Peak Pulse Power (W) C J - Junction Capacitance (pf) Bi-Directional T = 25 C f =.0 MHz V sig = mvp-p Measured at Stand-Off Voltage V WM Uni-Directional 0 2 µs 0µs 00µs ms 0ms Pulse time-t VBR - Breakdown Voltage Version: May-4 Page Number: 7/8

8 Revision History Date Revision Description of Changes 4-Sep-2 0 Original Data Sheet 0-Mar-3 -Jun-3 2-May V to 540V Reference included for Unidirectional 3V Reference included for Unidirectional Update Peak Pulse Power Derating Curve. Disclaimer All product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. Fagor Electrónica, S.Coop., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Fagor"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Fagor makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Fagor disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Fagor's knowledge of typical requirements that are often placed on Fagor products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Fagor's terms and conditions of purchase, including but nos limited to the warranty expressed therein. Except as expressly indicated in writing. Fagor products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Fagor product could result in personal injury or death. Customers using or selling Fagor products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Fagor and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attomeys fees, even if such claim alleges that Fagor or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Fagor personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Fagor, Product names and markings noted herein may be trademarks of their respective owners. Version: May-4 Page Number: 8/8