48x48. Digital panel meter 3½-digit DV3, DT3. Without setpoints. Analog output
|
|
- Ruby Benson
- 5 years ago
- Views:
Transcription
1 kw Digital panel meter ½-digit DV, DT Without setpoints Analog status /0/04 - panelmeter_gb.doc page subject to alterations; errs including printer s errs
2 Digital panel meter Direct voltage Direct current Shunt Alternating voltage Alternating current Resistance Potentiometer PT00/PT000 Thermocouple kw Direct voltage, direct current ORDER NUMBER OF TYPE (without options) 0 V 0/4-0 ma 0 V signal input (DC) Power supply Power supply ( ) DV B DV B Transmitter connections see page 6 Direct voltage (Shunt) 60 mv 50 mv 0 V signal input (DC) Power supply Power supply ( ) DV B DV B Alternating voltage, alternating current 0 V 5 A 0 V signal input (AC) Power supply Power supply ( ) Standard DV B True effective value RMS DV B Standard DV B True effective value RMS DV B Resistance, potentiometer Rx Thermocouple L, J K Thermocouple Power supply Measuring range Power supply Measuring range ( ) Power supply Power supply ( ) 0kΩ DV B Measuring range 00kΩ DV B Measuring range MΩ DV B 0kΩ DV B Measuring range 00kΩ DV B Measuring range MΩ DV B DT.40x.850B DT.40x.870B Typ L (FeCuNi - DIN) -50 up to 500 C Typ J (FeCuNi - americ.) -50 up to 500 C Typ K (NiCrNi) -00 up to 800 C (fill in the desired type of thermocouple in the der number instead of x) status /0/04 - panelmeter_gb.doc page subject to alterations; errs including printer s errs DV, DT
3 PT00 ( wire) Power supply ORDER NUMBER OF TYPE (without options) wire DT.0.850B (99,9 C) wire DT B (600 C) wire DT.0.850B (99,9 C) wire DT B (600 C) Power supply wire DT.0.870B (99,9 C) PT00 ( wire) ( ) wire DT B (600 C) wire DT.0.870B (99,9 C) wire DT B (600 C) PT00 -wire PT00 -wire PT00 -wire PT000 ( wire) PT000 -wire Power supply Power supply ( ) Power supply Power supply ( ) wire DT B (99,9 C) wire DT B (99,9 C) wire DT B (600 C) wire DT B (600 C) OPTIONS DV Direct voltage DV Shunt DV Alternating voltage DV Resistance DT.40x... Thermocouple DT.x0.../.x06... PT00/0 ( wire) l LED green x x x x x x Protection IP54 at the front x x x x x x Protection IP65 at the front x x x Plug in terminal x x x x x Analog 0-0 VDC/ ma x x x x x x Analog 0-0 ma/load 500 Ω x x x x x x Analog 4-0 ma/load 500 Ω x x x x x x Analog 0-0 VDC/ ma (supply voltage ) x x x x x x Analog 0-0 ma/load 500 Ω (supply voltage ) x x x x x x Analog 4-0 ma/load 500 Ω (supply voltage ) x x x x x x Analog with customer specified offset (S6) x x x x x x Analog and protection IP65 See series PVE 8 signs) x x x x X x Other power supplies on demand x x x x X x Setpoints See series PVE status /0/04 - panelmeter_gb.doc page subject to alterations; errs including printer s errs DT
4 Technical data f all units of the DV, DT serie, if not indicated otherwise Dimensions Housing B48 x H48 x T mm, including screw terminal (T=47 mm, including plug in terminal) Assembly cut out x mm Fastening special quick plastic clamp proper to fix in wall thickness up to 50 mm Housing material PC/ABS-blend, colour black, UL94V-0 Protective system at the front IP40 connection IP00 Weight approx. 0.8 kg Connection at the rear side via terminals up to.5 mm Input DV Direct voltage, Direct current Measuring range 0-0 V, 0-0 ma ma - all ranges selectable via connection terminal Offset adjustment suppted by offset potentiometer (-500 up to 500) Input resistance Ri with 0 V = ~55 kω 0 ma = ~00 Ω DV Direct voltage (Shunt) Measuring range 0-60 mv, 50 mv - all ranges selectable via connection terminal Offset adjustment suppted by offset potentiometer (-00 up to 00) Input resistance Ri with 60 mv = ~5 kω 50 mv = ~9 kω DV Direct voltage, Direct current Measuring range 0 V, A, 5 A all ranges selectable via connection terminal Offset adjustment suppted by offset potentiometer (-00 up to 00) Input resistance Ri with 0 V = ~00 kω A = ~76 mω 5 A = ~56 mω DV Resistance Measuring range 0 kω, 00 kω, MΩ Offset adjustment suppted by offset potentiometer (-00 up to 00) DT.x0... PT00 Sens -wire, -wire Measuring range up to 99.9 C Sens current approx. ma DT.x06... PT00 Sens -wire, -wire Measuring range -00 up to 600 C Sens current approx. ma DT PT000 Sens -wire Measuring range -55 up to 99,9 C Sens current approx. 0. ma DT PT000 Sens -wire Measuring range -00 up to 600 C Sens current approx. 0. ma DT.40x... Thermocouple L FeCuNi (DIN) -50 up to 500 C J FeCuNi (americ.) -50 up to 500 C K NiCrNi -00 up to 800 C Output F all versions Analog 0-0 VDC/ ma (0.% of measuring value, /-0.05% of full scale) 0-0 ma, 4-0 ma - load 500 Ω (0.% of measuring value, /-0.05% of full scale) Offset Not changeable, offset cresponds to 0 digit, see options. Final value Adjustable to 0 V 0 ma, within the indication range 50 to 999. (The measuring inputs are not from the!) DT.x0... Final value 00 C 0 V 0 ma adjustable f range from 5.0 C up to 99.9 C DT.x06... Final value 600 C 0 V 0 ma adjustable f range from 80 C up to 600 C DT.40x... Final value 500 C 0 V 0 ma adjustable f range from 80 C up to 500 C Final value 800 C 0 V 0 ma adjustable f range from 80 C up to 800 C status /0/04 - panelmeter_gb.doc page 4 subject to alterations; errs including printer s errs
5 Technical data Accuracy F all versions Measuring principle Dual-Slope-Integration DV Temp. drift ~ 00 ppm/k DV ~ 50 ppm/k DV I ~ 00 ppm/k / U ~ 00 ppm/k DV ~ 00 ppm/k DT.40x... ~ 00 ppm/k DT.x0... ~ 00 ppm/k DT.x06... ~ 00 ppm/k F all versions Measuring fault /-0.% of measuring value, /- digit DV.0x4... Frequency range Nominal precision 40 Hz up to 000 Hz Measuring fault Voltage range: /-0.5% of measuring value, /-digit A range: /-0.5% of measuring value, /-digit 5 A range: /-0.5% of measuring value, /-digit Measuring principle (input) Via rectifier effective value with sine wavefm only DV.x4... Frequency range Nominal precision 40 Hz up to 000 Hz Measuring fault Voltage range: /-0.5% of measuring value, /-digit, crest fact A range: /-0.5% of measuring value, /-digit, crest fact 5 A range: /-0.5% of measuring value, /-digit, crest fact Measuring principle (input) True effective value RMS DT.x0... Measuring fault max. /-0.5 C, /- digit DT.x06... Measuring fault max. /- C, /- digit DT.60x... Measuring fault R L 0 Ω = /-K R L > 0 Ω 0 Ω = /-K DT.40x... Measuring fault type J, L max. 5 C Measuring fault type K range from -00 C up to -50 C max. 5 C range > -50 C up to 600 C max 5 C range > 600 C up to 800 C max 5 C F all versions Resolution /-999 digit DT.x C DT.x06... C DT.40x... C Power unit Supply voltage /- 0% (50-60 Hz), (8-0 V), (/-0%) Consumption max. 5 VA Indication Display LED with 7 segments, 0 mm high, red ½-digit = indication 999 Overflow by showing on the fourth digit DV DV DV Decimal point Adjustable by bridging on front side. Measuring time sec. Blanking Blanking out of last digit (selectable by bridge). Plus sign Selectable by bridging on front side DV Decimal point Adjustable by bridging on front side. Measuring time sec. Blanking Blanking out of last digit (selectable by bridge). DT.xx... DT.xx6... Measuring time sec. Ambient Wking temperature 0 up to 60 C conditions Sting temperature -0 up to 80 C Housing: mm 48 mm 48 mm mm(with plug in terminal 48 mm) 4 mm 4 mm 0,6 mm 45,0 mm -0,0 mm Assembly cut out 0,6 mm 45,0 mm -0,0 mm 6 mm status /0/04 - panelmeter_gb.doc page 5 subject to alterations; errs including printer s errs
6 Connection diagrams DV wire: 4-0 ma -wire: 0-0 ma -wire: 0-0 V /0-5 V 4-0 ma 0- V / -6 V Signal - Transmitter Signal Transmitter Transmitter i.e. /DC - i.e. /DC - i.e./dc Signal Ordering code DV, DT Digital panel meter D V B Basic model Internal index Mechanical options Voltage metering V 0 Protection IP40 Temperature metering T Protection IP65 Protection IP54 5 Plug in terminal, protection IP54 Number of digits 6 Plug in terminal, protection IP40 ½ digits 7 Plug in terminal, protection IP65 Sens supply Power supply No sens supply ( ) Temperature devices PT00- wire PT00- wire Size of housing PT000- wire 6 8 Thermocouple 4 Resistance Measuring input Measuring range up to 0 kω 5 Direct voltage, direct current Measuring range up to 00 kω 6 Direct voltage, shunt measuring Measuring range up to MΩ 7 4 Alternating voltage, alternating current 6 Resistance Alternating voltage, current Range PT00/000 (00 C) f DT Standard 0 6 Range PT00/000 (600 C) f DT True effective RMS L Thermocouple type L f DT J Thermocouple type J f DT K Thermocouple type K f DT Outputs No V 0-0 ma 4-0 ma status /0/04 - panelmeter_gb.doc page 6 subject to alterations; errs including printer s errs
96x48. m/s. Digital panel meter 3½-digit DV3, DT3. Without setpoints. Analog output. Sensor supply
m/s Digital panel meter 3½digit DV3, DT3 Without setpoints Analog Sens supply status /0/04 panelmeter6x4_gb.doc page subject to alterations; errs including printer s errs 6x4 Digital panel meter Direct
More information96x48. m/s. Digital panel meter 3½-digit DV3, DT3. Without setpoints. Analog output. Sensor supply
m/s Digital panel meter 3½digit DV3, DT3 Without setpoints Analog Sens supply status 06/03/0 panelmeter_gb.doc page subject to alterations; errs including printer s errs Digital panel meter Direct voltage
More information72x36. Digital panel meter with microprocessor based technology 4-digit PVE4, PTE4, PFE4, PFL4. Galvanically insulated
P VA Digital panel meter with microprocess based technology digit PVE, PTE, PFE, PFL Galvanically insulated free scalable s/hysteresis Analogue galvanically insulated Min/max memy status //0 panelmeterx6analog_gb.doc
More informationm/min Digital panel meter with 4½-digit PV4, PT4, PF4, PW4 galvanically insulated 8 free scalable setpoints/hysteresis optical setpoint indication
P m/min Digital panel meter with 4½digit PV4, PT4, PF4, PW4 galvanically insulated free scalable setpoints/hysteresis optical setpoint indication analog galvanically insulated sens supply galvanically
More informationDIGITAL PANEL INSTRUMENTS
DIGITAL PANEL STRUMENTS PVE, PTE, PFE, PFL Programmable Digital Panel Instrument x mm Programmable digital panel f moniting and control with different interfaces and inputs Direct voltage / current PT00/PT000
More informationminimal installation depth: 70 mm without plug-in terminal 30 additional adjustable setpoints (parameter driven)
Digital panel meter 5-digit M2 red display of -19999 99999 digits (optional green, orange, blue or tricolour display) minimal installation depth: 70 mm without plug-in terminal adjustment via factory default
More informationminimal installation depth: 57 mm without plug-in terminal min-/max-value recording display flashing at threshold exceedance / undershooting
Digital panel meter 4-digit M1 red display of -1999 9999 digits (optional green, orange or blue display) minimal installation depth: 57 mm without plug-in terminal adjustment via factory default or directly
More informationminimal installation depth: 25 mm without plug-in terminal min-/max-value recording display flashing at threshold exceedance / undershooting
Digital panel meter 4-digit M1 red display of -1999 9999 digits (optional green, orange or blue display) minimal installation depth: 25 mm without plug-in terminal adjustment via factory default or directly
More informationDigital panelmeter with microprocessor based technology 5 digit. 4 free scalable setpoints/hysteresis/delay time (option)
1 2 3 4 P Digital panelmeter with microprocessor based technology 5 digit PU5 Universal measuring input free configurable Measuring inputs: voltage, current, shunt, thermocouple, resistance, resistor thermocouple
More informationinstallation depth: 90 mm without plug-in terminal 30 additional adjustable setpoints permanent MIN/MAX-value recording volume measuring (totaliser)
Digital panel meter 5-digit M3 red display from -19999 99999 Digits (optional green, orange or blue display) installation depth: 90 mm without plug-in terminal adjustment via factory default or directly
More informationLight-strip indicator
/2 s /2 PROLUX 96 x 24 mm with 5 segments, /6 PROLUX 144 x 24 mm with 101 segments, /10 PROLUX 144 x 6 mm with 71 segments, Siemens MP 12 200 PROLUX 96 x 24 mm with 5 segments, Design The PROLUX light-strip
More informationinstallation depth: 90 mm without plug-in terminal display flashing at threshold exceedance / threshold undershooting
Digital panel meter 5-digit M3 red display from -19999 99999 Digits (optional green, orange or blue display) installation depth: 90 mm without plug-in terminal min-/max-memory 30 additional adjustable
More informationEconomical Digital Indicators For Process and Electrical Measurement
Economical Digital Indicators For Process and Electrical Measurement DP18 Series Panel Punches Available DP18-P5, 4 to 20 ma input. DP18-EC, thermocouple input visit omega.com/thermocouple for thermocouples.
More informationDIGITAL PANEL INSTRUMENTS
M2-1V.../ M2-1T... M2-1V.../ M2-1T... Case 96 x 48 mm Programmable Digital Panel 96 x 48 mm Red display of -1999 up to 99999 (optional green, orange, blue or tricolour display) Minimal installation depth:
More informationProcess displays For standard signals, temperature, resistance measurement
Features Inputs: Voltage ±10 V, ±200 V / Current ±20 ma / thermocouples J,K,T,N,Pt100,Pt1000 / resistance measurement / potentiometer Display range can be linearised Two limits output Min, Max functions
More informationminimal installation depth: 97 mm without plug-in terminal min-/max-value recording display flashing at threshold undercut/ exceedance
Digital panel meter 4-digit M1 red display with -1999 9999 digits (optional green, orange or blue displays) minimal installation depth: 97 mm without plug-in terminal adjustment via factory default or
More informationHigh-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals
Accessories High-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals WIKA data sheet AC 80.03 Applications Machine building
More informationDigital Indicator DS 96/48 PK
Data Sheet 10/33-2.1-EN Digital Indicator DS 9/48 P Digital Indicator DS 9/48 PK Inputs Direct current, direct voltage Thermocouple Resistance thermometer Programmable via front keys or PC software Limit
More informationHigh-quality digital indicator for panel mounting Model DI35-M, with multi-function input Model DI35-D, with two inputs for standard signals
Accessories Highquality digital indicator for panel mounting Model DI35M, with multifunction input Model DI35D, with two inputs for standard signals WIKA data sheet AC 80.03 Applications Machine building
More informationSINEAX V 604s Programmable multifunctional transmitter
SINEAX V 60s f direct currents, direct voltages, temperature senss, teletransmitters potentiometers 00 SINEAX V60s is a multifunctional transmitter f top-hat rail assembly with the following main characteristics:
More informationDP2000 ORDERING GUIDE To Order MODEL NO.
1 8 DIN VERSATILE PROCESS MONITORS CONFIGURABLE DP2000-S, 1 8 DIN meter, shown smaller than actual size. DP2000 Series Complete with Input Board RoHS 2 Compliant DP2000-J1, with TJ36-ICSS-116G-12, transition
More informationAdjustable Digital Process Instrument MDK480
Description The adjustable Digital Process Instrument MDK480 is designed to measure and display process variables in industrial applications.the instrument is panel mounted with front frame dimensions
More informationMODEL: KS. Plug-in Signal Conditioners K-UNIT
Plug-in Signal Conditioners K-UNIT DC ALARM Functions & Features Providing relay contact closures at preset DC input levels Dual (Hi/Lo) trip Multi-turn screwdriver setpoint adjustments Monitor jacks provided
More informationDIGEM f 96 x 48 EK. Applications. Description
3-349-002-03 1/7.98 Front panel dimensions: 96 x 48 mm LED display: red or green, 14 mm high Max. display range: 19 999 to + 32 765 Modular connectors for flexible use Simple adjustments at front panel
More informationBASIC FEATURES C %RH. Shimaden, Temperature and Humidity Control Specialists. CP3701: Thermocouple Temperature Converter
Shimaden, Temperature and Humidity Control Specialists C %RH CP3701: Thermocouple Temperature Converter CP3702: R.T.D. Temperature Converter CP3703: mv DC-DC Converter CP3704: V/mA DC-DC-Converter CP3705:
More informationTheta 60R. Technical Data Sheet. Special Features. Fig. 2 Theta R, 2 channel version, in housing S17 hole mounting brackets pulled out.
Technical Data Sheet Theta 60R 60 R 60 R Fig. Theta R, channel version, in housing S7 clipped on to a top - hat rail. Fig. Theta R, channel version, in housing S7 hole mounting brackets pulled out. Theta
More informationDigital indicator for panel mounting With multi-function input Model DI25
Accessories Digital indicator for panel mounting With multi-function input Model DI25 WIKA data sheet AC 80.02 Applications Plant construction Machine tools Plastics technology and processing Ventilation
More informationTrip amplifier, 1 channel
Trip amplifier, channel Features I II III + + P I out I U out 4 Relay overrange Relay overrange Relay overrange ç 4...0 ma IM4-4-SRi: è 0...0 ma IV + + + > 50 kw 5 6 7 8 9»8 V < 5 ma 50 W Pwr GN/RD 4 5
More informationMODEL: W2TS. Mini-MW Series
Space-saving Dual Output Signal Conditioners Mini-MW Series THERMOCOUPLE TRANSMITTER Functions & Features Accepts direct input from a thermocouple and provides a standard process signal 5-segment linearization
More informationMCU-10. Display. Adjustments. Analogue Output, Measuring. Analogue Output, Setpoint. Standard Process Signal. LED Indication. LCD Display.
Introduction & Selection Guide INTRODUCTION The Brodersen monitoring relays are high quality products incorporating up-to-date circuit design together with modern, efficient components to ensure a long
More informationDigital Indicator DS 96/24
Data Sheet 10/33-2.11-EN Digital Indicator DS 96/24 This indicator is suitable for measuring direct voltage or direct current. By using potentiometers, the digital display can be assigned to any input
More informationMODEL: 47LV. Digital Panel Meters 47 Series
Digital Panel Meters 7 Series DC INPUT DIGITAL PANEL METER ( ½ digit, LED display type) Functions & Features ½ digit DC input digital panel meter /8 DIN size Moving average function to suppress the display
More informationLAUREL ELECTRONICS, INC.
LAUREL ELECTRONICS, INC. Laureate True RMS AC Voltage & Current Meter with 1 Cycle Update at 50/60 Hz Features True AC or AC plus DC RMS measurement with crest factor of 3.0 at FS Fast response: reading
More informationBasic Series Square Panel Meters Features Benefits
Features Benefits Worldwide sales and service All panel meters can be supplied ex stock 1) Shunt resistors without protective cover (nominal current up to 1.5 ka) ASK 31.3 / ASK 412.4 current transformers
More informationSefram. Sefram SEFRAM A new family of thermal recorders 6 to 36 channels. Make sure to visit our Website
Make sure to visit our Website http://wwwseframfr Sefram Sefram SEFRAM A new family of thermal recorders 6 to 36 channels 6 to 36 analogue channels Measurement boards : - 6 isolated channels universal
More informationDIGITAL THERMOMETER VIEW RECORDERS Digital Thermometer FEATURES
Digital Thermometer High-Accuracy Reference Junction Compensation: Compensation accuracy (±0.2 C) Input terminals are provided on both front and rear panels, and an input site is switch selectable. The
More informationTransmitter / Signal Conditioning
GHM GROUP CORPORATE GHM Messtechnik GmbH Schloßstr. 6 88453 Erolzheim GERMANY Phone +49 7354 937233-76 Fax +49 7354 937233-88 Transmitter / Signal Conditioning System Measuring input Direct connection
More informationAssembly. Front view. Parametrization interface. Power Bus
Temperature Converter Features Assembly 1-channel signal conditioner 24 V DC supply Thermocouple, RTD, potentiometer or mv input Input for PTC thermistor Current and voltage output Line fault (LFD) and
More informationPROGRAMMABLE CONTROLLER
SERIES FP21 High Accuracy ±0.1% Programmable 9 Patterns and 9 Steps (81 Steps Max.) Auto-Tuning PID RA / DA Selectable User-Selectable Inputs (Thermocouple) User-Selectable Ranges Programmable Scaling
More informationDRG-SC Series Signal Conditioners
DRG-SC Series Signal Conditioners DRG-SC Series 245 Basic unit Models Available for Thermocouples, RTDs, DC Voltage and Current, Frequency, Strain Gage Bridge, AC Voltage and Current Field Configurable
More informationMODEL: M2VF MODEL: M2VF [1][2] [3][4]
Super-mini Signal Conditioners Mini-M Series SIGNAL TRANSMITTER (high speed response) Functions & Features Converts DC input from a sensor into a standard process signal Isolation between input and output
More informationElectronic Thermostat TE-1 Version according to EN
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 3639 Fulda, Germany Postal address: 3635 Fulda, Germany Phone: +49 661 63- Fax: +49 661 63-67 e-mail: mail@jumo.net Internet: www.jumo.net JUMO
More informationSEFRAM DAS Sefram. Sefram. A new family of paperless recorders 6 to 72 channels, to cover all your applications
Sefram SEFRAM Make sure to visit our Website http://wwwseframfr A new family of paperless recorders 6 to 72 channels, to cover all your applications 6 to 72 analogue channels Measurement boards : - 6 isolated
More informationR24 DISPLAY MODULE WITH ACTIVE OUTPUT AND RELAY
Čapkova 22 678 01 Blansko tel.: +420 516 416942, 419995 fax: +420 516 416963 R24 DISPLAY MODULE WITH ACTIVE OUTPUT AND RELAY Display module is designed for measuring the resistance, the signal from the
More information[3] MOUNTING DIRECTION
Bargraph Indicators N Series BARGRAPH INDICATOR Functions & Features Displays two process variables in dual graphic bargraphs of LED segments Single and dual bargraphs IP front cover plate is easily replaced
More informationMCU-10. Display. Adjustments. Analogue Output, Measuring. Analogue Output, Setpoint. Standard Process Signal. LED Indication.
Introduction & Selection Guide INTRODUCTION The Brodersen monitoring relays are high quality products incorporating up-to-date circuit design together with modern, efficient components to ensure a long
More informationDigital Multimeters R6451A/6452A. R6451A/6452A Digital Multimeters. 5 1/2 Digit DMM Series Enabling Dual Input and Display
5 1/2 Digit DMM Series Enabling Dual Input and Display R6451A/6452A R6451A: General-Purpose Low-Price DMM with Standard Functions R6452A: Full-Functional DMM with Dual- Channel Input and Dual Display (Photo
More informationDIGITAL THERMOMETER Digital Thermometer FEATURES INDEX RECORDERS
Digital Thermometer 23 88 350 mm 3 kg (8-5/8 3-/2 3-3/4" 6.6 lbs) The Digital Thermometer has 6 ranges of temperature sensors and measuring functions of DC V and Ω. YOKOGAWA-original A/D converter (feedback
More informationMODEL: 47LPA. [2] ALARM OUTPUT 0: None 1: N.O. relay contact, 4 points 2: SPDT relay contact, 2 points. Digital Panel Meters 47 Series
Digital Panel Meters 47 Series FREQUENCY INPUT DIGITAL PANEL METER (4½ digit, LED display type) Functions & Features 4 ½ digit digital panel meter 1/8 DIN size Accepts a pulse train input to measure rotation
More informationMODEL: M2XU MODEL: M2XU [1][2] [3][4]
Super-mini Signal Conditioners Mini-M Series UNIVERSAL TRANSMITTER (PC programmable) Functions & Features Accepts direct inputs from various sensors and provides a standard process signal I/O types and
More informationJUMO di 32 / di 08. Brief description. Block structure
M. K. JUCHHEIM GmbH & Co Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 (0) 661 60 037 25 Fax: +49 (0) 661 60 036 81 EMail: mail@jumo.net Internet:
More informationData sheet IDM 99III Digital Multimeter
RS Stock No. 7575116 Data sheet IDM 99III Digital Multimeter Feature: 6000 count digital display with 62 segment bar graph Extra Large scale display and white backlit AC+DC True RMS 0.08% basic DCV accuracy
More informationSC-FI Series Frequency to Current Signal Conditioner
SC-FI Series Frequency to Current Signal Conditioner 99829 08/27/01 INDEX DESCRIPTION... 1 SPECIFICATIONS... 1 TYPICAL WIRING HOOKUP... 1 INPUT & OUTPUT SETTINGS... 2 "L" OPTION SPECIFICATIONS... 3 "L"
More informationDATA SHEET. Voltmeters and Ammeters,
DATA SHEET Voltmeters and Ammeters, Moving Coil (type ) Q48, Q72, Q96, Q144 90 or 240 pointer Accuracy class 1.5 Exchangeable scale (type x) Document no.: 4921210012S Application: Moving-coil instruments
More informationCONTA-ELECTRONICS. Converter Units
CONTA-ELECTRONICS Whether for manufacturing, electrical machine and plant instrumentation, control engineering, power distribution, building automation, or process engineering it is always important to
More informationJUMO dtrans T02 Programmable 4-wire Transmitter (Smart Transmitter)
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
More informationMODEL: M6SXU MODEL: M6SXU [1][2] [3][4]
Tension-Clamp Ultra-Slim Signal Conditioners M6S Series UNIVERSAL TRANSMITTER (PC programmable) Functions & Features Maintenance-free tension clamp connection Universal input (mv, V, ma, T/C, RTD and potentiometer)
More informationSHIMADEN DIGITAL INDICATORS
Shimaden, Temperature and Humidity Control Specialists C %RH Series SD16A & SHIMADEN DIGITAL INDICATORS approved,ul applied BASIC FEATURES compliance DIN Size 48 x 96 mm ±.3% High Accuracy Indication Large
More informationCTP16-Rotate. KMT - Kraus Messtechnik GmbH
KMT - Kraus Messtechnik GmbH Gewerbering 9, D-83624 Otterfing, Germany, 08024-48737, Fax. 08024-5532 Home Page http://www.kmt-telemetry.com, Email: info@kmt-telemetry.com CTP16-Rotate 16 channel telemetry
More informationDigital Panel Meters DC/AC Current and Voltage Indicator/Controller Type LDM40
Digital Panel Meters Current and Voltage Indicator/Controller Type LDM40 Multi-input instrument 4-DGT LED 0.1% RDG basic accuracy TRMS AC current and voltage measurements AC/DC current measurements: selectable
More informationDVM98. True RMS Digital Multimeter. 1 Safety information. 1.1 Preliminary. 1.2 During use
True RMS Digital Multimeter DVM98 1 Safety information This multimeter has been designed according to IEC - 1010 concerning electronic measuring instruments with an overvoltage category (CAT II) and pollution
More informationKS 40-1 burner Universal Burner Controller
Universal Burner Controller BluePort interface and BlueControl software aintenance anager and error list odulating, two or three stage regulation Automatic/manual and function key External setpoint and
More informationAPPENDIX APPENDIX A 1
A 1 SPECIFICATIONS Ratings Supply voltage 100 to 240 VAC, 50/60 Hz 24 VAC, 50/60 Hz/24 VDC Operating voltage range 85 to 110% of rated supply voltage Power consumption 7VA 4VA/2.5W Sensor input Thermocouple
More informationSHIMADEN DIGITAL INDICATORS
Shimaden, Temperature and Humidity Control Specialists C %RH Series SD16 & SHIMADEN DIGITAL INDICATORS & NRTL /C approved BASIC FEATURES DIN Size 48 x 96 mm ±.3% High Accuracy Indication Large 2 mm bright
More informationD7F. Detects Changes in Machine. Vibration. Vibration Sensor with Linear Output or Manual Setting. Ordering Information
with Linear Output or Manual Setting Detects Changes in Machine ON/OFF output can be set and checked quickly and easily from the vibration level meter. waveforms can be checked using the AC monitor output.
More informationFalcon F35 & F45 Digital Panel Meters
1/8 DIN Indicator 3-1/2 or 4-1/2 digit bright red LED display Front panel pops off for easy decimal point setting and display scaling Only 3.12 (79mm) required behind panel Optional excitation output NEMA
More informationDUAL OUTPUT AC CURRENT/VOLTAGE TRANSDUCER
OPERATOR S MANUAL DUAL OUTPUT AC CURRENT/VOLTAGE TRANSDUCER Masibus Automation & Instrumentation Pvt. Ltd. B/30, GIDC Electronics Estate, Sector-25, Gandhinagar-382044, Gujarat, India Web Site: www..com
More informationC330 / C330X PC-Programmable Universal, 2-wire Transmitter
C330 / C330X PC-Programmable Universal, 2-wire Transmitter The IPAQ C330 transmitter is a universal, isolated, temperature transmitter with additional voltage and resistance input. Its robust design and
More informationUniversal measuring transducer
Universal measuring transducer EM4000 Compact housing High accuracy Full galvanic separation MODbus (RS232/RS485) 3 Analogue + 1 Pulse output Direct voltagemeasurement up to 690V 48 hour service EXW ELEQ
More informationVariTrans P V. Safe and Sound.
1000 V. Safe and Sound. VariTrans P 29000 Compact high-voltage isolation amplifiers with safe galvanic isolation, VariPower broad-range power supply and genuine calibrated range selection. Isolation Amplifiers
More informationDisplay. Characteristics. Applications. Product information
GHM GROUP CORPORATE GHM Messtechnik GmbH Schloßstr. 6 88453 Erolzheim GERMANY Phone +49 7354 937233-76 Fax +49 7354 937233-88 Product s s Color Case Front dimensions 7-segment 7.6, 10, 14, 20 mm Red, green,
More informationMODEL: W2DYS SEN TRONIC AG. Mini-MW Series
MODEL: WDYS Space-saving Dual Output Signal Conditioners Mini-MW Series CURRENT LOOP SUPPLY Functions & Features Powers a 0 ma DC current loop Short circuit protection Applicable to smart transmitters
More informationTrue RMS Bench Multimeters 2831E and 5491B
Data Sheet True RMS Bench Multimeters and True RMS Bench Multimeters with Dual Display The B&K Precision models and are versatile and dependable bench multimeters suitable for applications in education,
More informationData sheet IDM 98III Digital Multimeter
RS Stock No. 7575110 Data sheet IDM 98III Digital Multimeter FEATURE: 6000 count digital display with 62 segment bar graph Extra Large scale display and white backlit AC+DC True RMS 0.1% basic DCV accuracy
More informationEnergy Management Modular Smart Power Transducer Type SPT-90
Energy Management Modular Smart Power Transducer Type SPT-90 Class 0.5 (current/voltage) 16-bit µp-based modular smart power transducer Measurements of: W, Wavg, VA, VAr, PF, Wh, VAh, VArh, Amax (among
More informationMODEL: M2SES SEN TRONIC AG [3] OUTPUT
Super-mini Signal Conditioners Mini-M Series HIGH/LOW SELECTOR Functions & Features Monitors two DC input signals and transmits an output signal proportional to the higher or lower input CE marking UL
More informationFluke 83V and 87V Digital Multimeters
Fluke 83V and 87V Digital Multimeters Detailed Specifications For all detailed specifications: is given as ±([% of reading] + [number of least significant digits]) at 18 C to 28 C, with relative humidity
More informationTemperature Input Module for Zone 1 Series 9482/32
www.stahl.de > 8 channels for temperature sensors > Intrinsically safe inputs Ex ia > For Pt-, Ni- and Cu-resistance temperature detectors according to DIN, IEC and GOST in 2-, 3- and 4-wire circuits >
More informationMODEL: M2DYS SEN TRONIC AG
Super-mini Signal Conditioners Mini-M Series CURRENT LOOP SUPPLY Functions & Features Powers a 20 ma DC current loop Short circuit protection Applicable to smart transmitters CE marking UL approval Typical
More informationGeneral Specifications
General Specifications GS J0X02-01E WX2 Series Computing Units (Variable/Fixed Software Type) Moving Average Unit, Dead Time Unit, Velocity Unit, First Order Lug Unit, First Order Lead Unit, Velocity Limiter,
More informationSHIMADEN PROGRAMMABLE CONTROLLER
SHIMADEN PROGRAMMABLE CONTROLLER Shimaden, Temperature and Humidity Control Specialists SERIES FP21 High Accuracy ±0.1% Programmable 9 Patterns and 9 Steps (81 Steps Max.) Auto-Tuning PID RA / DA Selectable
More informationSR25. SHIMADEN DIGITAL CONTROLLER Shimaden, Temperature and Humidity Control Specialists MICROPROCESSOR-BASED AUOT-TUNING PID CONTROLLER
SHIMADEN DIGITAL CONTROLLER Shimaden, Temperature and Humidity Control Specialists SERIES SR25 MICROPROCESSOR-BASED AUOT-TUNING PID CONTROLLER High Accuracy ±0.1% High Sampling Cycle 0.1 sec. Auto-Tuning
More informationEA16, EB16, EA17, EA19
MOVING-IRON METERS EA16, EB16, EA17, EA19 and EA12 TYPES AMMETERS and VOLTMETERS CATEGORIES OF METER CLIMATIC VERSIONS If it is not written otherwise in the order, these meters are intended to use in moderate
More informationRM3-IV-LPI. 4-20mA Loop Powered Signal Isolators ma & DC Volts Inputs Operation and Instruction Manual
RMIVLPI Loop Powered ignal Isolators & DC Volts s Operation and Instruction Manual Introduction This manual covers the installation and operation of output loop powered signal isolator model. Model RMIV
More informationQuadrupole Power Supply Unit QPS400-3
http://www.cgc-instruments.de/ Quadrupole Power Supply Unit QPS400-3 Instruction Manual Document version 1.00, created on 12.07.2004 Technical Data Quadrupole Power Supply Unit 3 400 V QPS400-3 Version
More informationAMM-1022 Digital Multimeter USER`S MANUAL
Digital Multimeter USER`S MANUAL www.tmatlantic.com CONTENTS 1. SAFETY INFORMATION.3 2. DESCRIPTION..6 3. SPECIFICATIONS.8 4. OPERATING INSTRUCTION..11 4.1 Voltage measurement...11 4.2 Current measurement
More informationDigital Meters With A Multicolour Bargraph LEL-NA3 one-channel LEL-NA5 one-channel LEL-NA6 two-channel
Digital Meters With A Multicolour Bargraph LEL-NA3 one-channel LEL-NA5 one-channel LEL-NA6 two-channel Digital-analogue meters of LEL-NA series with a multicolour bargraph have a universal input destined
More informationDIGITAL PANEL METER N24 AND N25 METER SERIES
DIGITAL PANEL METER N24 AND N25 METER SERIES USER S MANUAL Contents 1. APPLICATION...5 2. METER SET...5 3. OPERATIONAL SAFETY...6 4. INSTALLATION...7 4.1 Fixing Way...7 4.2 External Connection Diagrams...8
More informationFor non-electrical quantities
Controlgear 3UG3 monitoring relays 3RS17 interface converters N nsb0346h nsb0348h nsb0775h For electrical quantities For non-electrical quantities 3RS17 interface converter Selection and ordering data
More informationDC1010/DC1020/DC1030/DC1040
05/0 0-10-10-0-EN Page 1 of DC1010/DC1020/DC100/DC1040 DIGITAL CONTROLLERS Specification Overview The DC1000 Series are microprocessorbased controllers designed with a high degree of functionality and
More informationQ.raxx A slimline RS / EC
The Q.raxx slimline product is based on the standardized 19 technology, one rack unit (1 U) and is designed for measurements with a high level of flexibility, reliability and accuracy in the field of stationary
More informationSpecifications. 744 Users Manual
80T-150U Temperature Probe 80PK series thermocouples 80i-410 Clamp-on DC/AC Current Probe 80i-1010 Clamp-on DC/AC Current Probe 80i-500s Clamp-on AC Current Probe (requires the Y9108 adapter) 80i-1000s
More informationENGLISH. Datasheet Stock No RS PRO IDM 99III Digital Multimeter. Feature: 6000 count digital display with 62 segment bar graph
ENGLISH Datasheet Stock No. 123-3249 RS PRO IDM 99III Digital Multimeter Feature: 6000 count digital display with 62 segment bar graph Extra Large scale display and white backlit AC+DC True RMS 0.08% basic
More informationGeneral Specifications
General Specifications GS 77J04H0-0E Model MH Isolator (Free Range Type) General The MH is a plug-in type isolator that converts DC current or DC voltage signals into isolated DC current or DC voltage
More informationIsolators A3/1. Temperature Transmitter Field Circuit Non-Ex i Series
Temperature Transmitter Series 9182 > One unit for nearly all temperature sensors indivdually configurable > Signal duplication possible > Galvanic isolation between input, output, power supply and configuration
More informationMeasurement and Instrumentation
POWER QUALITY ENERGY PERFORMANCE Measurement and Instrumentation Overview of ranges Selection guide Info & advice Economical range for industrial use μdigi1 - μdigi2 ranges Programmable range for universal
More informationSINEAX V604s Programmable multifunctional transmitter
SINAX V60s for direct currents, direct voltages, temperature sensors, teletransmitters or potentiometers SINAX V60s is a multifunctional transmitter for tophat rail assembly with the following main characteristics:
More informationVariTrans P D1 TRMS
Isolation Amplifiers Transmitters Indicators Process Analytics Portable Meters Laboratory Meters Sensors Fittings VariTrans P 41000 D1 TRMS VariTrans P 41000 TRMS AC/DC High-Voltage Transmitters With True
More informationMODEL: AS4V. Plug-in Signal Conditioners M-UNIT
Plug-in Signal Conditioners M-UNIT DC ALARM (dual or quad alarm trip; field-configurable) Functions & Features Provides relay outputs at preset DC input levels Quad or dual trip Setting and display in
More informationAUTOMOTIVE CURRENT TRANSDUCER HAH3DR 700-S02
AUTOMOTIVE CURRENT TRANSDUCER Introduction The HAH3DR family, a tri-phase tranducer is for the electronic measurement of DC, AC or pulsed s in high power automotive applications with galvanic isolation
More information