LUXEON Altilon Intense 1x2

Transcription

1 AUTOMOTIVE LUXEON Altilon Intense 1x2 Industry-leading solutions for compact high performance headlight systems LUXEON Altilon Intense LEDs, with their miniaturized form factor, are designed to support low and high beam applications. The Lumileds automotive binning structure meets both SAE and ECE color specifications and is hot binned at 85 C, consistent with actual automotive operational environments. All LUXEON Altilon Intense LEDs are both IEC60810 and AEC-Q102 qualified. FEATURES AND BENEFITS Standard packaging for low cost and ease of manufacturability PRIMARY APPLICATIONS Adaptive Lighting Hot binned at 85 C MP to match closer to operating conditions ADB IEC/PAS White LED Matrix Beam Headlight Low Beam High Beam DS229 LUXEON Altilon Intense 1x2 Product Datasheet 2018 Lumileds Holding B.V. All rights reserved. RoHS COMPLIANT

2 Table of Contents General Product Information...2 Product Test Conditions...2 Part Number Nomenclature...2 Environmental Compliance...2 Performance Characteristics...3 Product Selection Guide....3 Optical Characteristics...3 Electrical and Thermal Characteristics....3 Absolute Ratings...4 JEDEC Moisture Sensitivity...4 Characteristic Curves...5 Spectral Power Distribution Characteristics...5 Light Output Characteristics...5 Forward Current and Voltage Characteristics....6 Color Shift Characteristics...7 Radiation Pattern Characteristics...9 Operating Limits Characteristics....9 Product Bin and Labeling Definitions...10 Designing with LUXEON Altilon Intense 1x Decoding Product Bin Labeling Luminous Flux Bins...10 Color Codes...11 Color Bin Definitions...12 Forward Voltage Bins...13 Mechanical Dimensions Reflow Soldering Guidelines...14 Packaging and Labeling Information Pocket Tape Dimensions...15 Reel Dimensions...15 Product Labeling...16 DS229 LUXEON Altilon Intense 1x2 Product Datasheet Lumileds Holding B.V. All rights reserved. i

3 General Product Information Product Test Conditions LUXEON Altilon Intense 1x2 LEDs are tested and binned using a 20ms monopulse (MP) at 1000mA drive current, case temperature, T c, of 85 C. Part Number Nomenclature Part numbers for LUXEON Altilon Intense 1x2 follow the convention below: Where: A 1 S L B D H 0 C C C C 0 B designates number of die (2=2 die) C C C C designates minimum luminous flux bin or custom part number Therefore, the following part number is used for a LUXEON Altilon Intense 1x2 with a minimum luminous flux of 460 lumens: A 1 S L D H Environmental Compliance Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Altilon Intense 1x2 is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). DS229 LUXEON Altilon Intense 1x2 Product Datasheet Lumileds Holding B.V. All rights reserved. 2

4 Performance Characteristics Product Selection Guide Table 1. Product selection for LUXEON Altilon Intense 1x2 at 20ms MP, 1000mA, T c =85 C. CONFIGURATION 1x2 PART NUMBER A1SL-58502DH0xxxx0 Optical Characteristics Table 2. Typical optical characteristics for LUXEON Altilon Intense 1x2 at 20ms MP, 1000mA, T c =85 C. PART NUMBER CORRELATED COLOR TEMPERATURE (CCT) TYPICAL TOTAL INCLUDED ANGLE [1] TYPICAL VIEWING ANGLE [2] θ 0.90V 2θ 1/2 MINIMUM MAXIMUM A1SL-58502DH0xxxx0 5500K 6250K Notes for Table 2: 1. Total angle at which 90% of total luminous flux is captured. 2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value. Electrical and Thermal Characteristics Table 3. Typical electrical and thermal characteristics for LUXEON Altilon Intense 1x2. PART NUMBER FORWARD VOLTAGE [1] (V f ) ELECTRICAL THERMAL RESISTANCE, R th j-c electr [2] (K/W) REAL THERMAL RESISTANCE, R th j-c real [3] (K/W) MINIMUM MAXIMUM TYPICAL MAXIMUM TYPICAL MAXIMUM A1SL-58502DH0xxxx Notes for Table 3: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. R th j-c el : Electrical thermal resistance (junction to case). 3. R th j-c real : Real thermal resistance (junction to case) with wall plug efficiency included (reference JESD51-51, JESD51-14, 4.1.3). 4. Dynamic resistance is the inverse of the slope in linear forward voltage model for LEDs. 5. Measured between 80 C and 90 C at binning current. DS229 LUXEON Altilon Intense 1x2 Product Datasheet Lumileds Holding B.V. All rights reserved. 3

5 Absolute Ratings Table 4. Absolute ratings for LUXEON Altilon Intense 1x2. PARAMETER PERFORMANCE Minimum DC Forward Current Maximum DC Forward Current Maximum DC Forward Current 1000h max 50mA 1125mA 1500mA Maximum Junction Temperature [1] 150 C Maximum Junction Temperature for Short Time Applications [1] 175 C Operating Case Temperature at Test Current [1] -40 C to 125 C Operating Case Temperature at Maximum Current [1] 125 C LED Storage Temperature -40 C to 130 C Soldering Temperature JEDEC 020c 260 C ESD Sensitivity [3] Reverse Voltage (V reverse ) ±8kV HBM, ±2kV CDM, ±400V MM LUXEON LEDs are not designed to be driven in reverse bias Notes for Table 4: 1. Proper current derating must be observed to maintain junction temperature below the maximum allowable. LUXEON Altilon Intense 1x2 LEDs driven at or above maximum LED case temperature may have a shorter lifetime. 2. Short time operations of less than 200 hours. 3. Measured using human body model (per JESD22 A114), machine model (per JESD22 A115) and charged device model (per JESD22 C101). JEDEC Moisture Sensitivity Table 5. Moisture sensitivity levels for LUXEON Altilon Intense 1x2. FLOOR LIFE STANDARD SOAK REQUIREMENTS LEVEL TIME CONDITIONS TIME CONDITIONS 1 Unlimited 30 C / 85% RH 168 Hours +5 / C / 85% RH DS229 LUXEON Altilon Intense 1x2 Product Datasheet Lumileds Holding B.V. All rights reserved. 4

6 Characteristic Curves Spectral Power Distribution Characteristics Figure 1. Typical normalized power vs. wavelength for LUXEON Altilon Intense 1x2 at 20ms MP, 1000mA, T C =85 C. Light Output Characteristics Figure 2. Typical normalized light output vs. case temperature for LUXEON Altilon Intense 1x2 at 20ms MP, 1000mA. DS229 LUXEON Altilon Intense 1x2 Product Datasheet Lumileds Holding B.V. All rights reserved. 5

7 Figure 3. Typical normalized light output vs. forward current for LUXEON Altilon Intense 1x2 at T C =85 C. Forward Current and Voltage Characteristics Figure 4. Typical forward current vs. forward voltage for LUXEON Altilon Intense 1x2 at T C =85 C. DS229 LUXEON Altilon Intense 1x2 Product Datasheet Lumileds Holding B.V. All rights reserved. 6

8 Figure 5. Typical forward voltage vs. case temperature for LUXEON Altilon Intense 1x2 at 20ms MP, 1000mA, T C =85 C. Color Shift Characteristics Figure 6. Typical color shift in CIE 1931 x and y coordinates for LUXEON Altilon Intense 1x2 at 20ms MP, 1000mA. DS229 LUXEON Altilon Intense 1x2 Product Datasheet Lumileds Holding B.V. All rights reserved. 7

9 Figure 7. Typical color shift in CIE 1931 x, y coordinates vs. forward current for LUXEON Altilon Intense 1x2 at 20ms MP, 1000mA. Figure 8. Typical color shift in CIE 1931 x and y coordinates over angle for LUXEON Altilon Intense 1x2 at 20ms MP, 1000mA. DS229 LUXEON Altilon Intense 1x2 Product Datasheet Lumileds Holding B.V. All rights reserved. 8

10 Radiation Pattern Characteristics Figure 9. Typical radiation pattern for LUXEON Altilon Intense 1x2 at 20ms MP, 1000mA, T C =85 C. Operating Limits Characteristics Figure 10. Maximum forward current vs. case temperature for LUXEON Altilon Intense 1x2. DS229 LUXEON Altilon Intense 1x2 Product Datasheet Lumileds Holding B.V. All rights reserved. 9

11 Product Bin and Labeling Definitions Designing with LUXEON Altilon Intense 1x2 Flux bins supportable for car programs depend on product color and program start-of-production and end-of-production dates. Flux roadmaps by year and product color are maintained and available from the sales representative. Please contact a local sales representative to request the flux bin range with best supportability for program timing. Decoding Product Bin Labeling In the manufacturing of semiconductor products, there are variations in performance around the average values given in the technical datasheets. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point or dominant wavelength and forward voltage. LUXEON Altilon Intense 1x2 LEDs are labeled using a 4-digit alphanumeric CAT code following the format below: A B C D Where: A designates luminous flux bin (example: C=420 to 440 lumens, G=460 to 480 lumens) B C designates color bin (example: 1B, 2C, 3D, 4A) D designates forward voltage bin (example: B=6.8V to 7.6V, C=7.6V to 8.4V) Therefore, a LUXEON Altilon Intense 1x2 with a lumen range of 420 to 440, color bin of 1B, and a forward voltage range of 6.8 to 7.6V has the following CAT code: C 1 B B Luminous Flux Bins Table 6 lists the standard luminous flux bins for LUXEON Altilon Intense 1x2 emitters. Product availability in a particular bin varies by color and platform start-of-production date. Contact your local sales representative for best supportability of programs. Table 6. Luminous flux bin definitions for LUXEON Altilon Intense 1x2, T c =85 C. BIN LUMINOUS FLUX/DIE [1] (lm) LUMINOUS FLUX/PACKAGE [1] (lm) MINIMUM MAXIMUM MINIMUM MAXIMUM A C E G J L N Notes for Table 6: 1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements. DS229 LUXEON Altilon Intense 1x2 Product Datasheet Lumileds Holding B.V. All rights reserved. 10

12 Color Codes y x Figure 11. Color bin structure in CIE 1931 color space for LUXEON Altilon Intense 1x2. Notes for Figure 11: 1. Lumileds supports the following bins for LUXEON Altilon Intense 1x2: 1D, 2C, 3B and 4A. 2. LUXEON Altilon Intense 1x2 color bins must be ordered by fine bin designators, shown below. H1 = 1A, 1B, 1C, 1D H2 = 2A, 2B, 2C, 2D H3 = 3A, 3B, 3C, 3D H4 = 4A, 4B, 4C, 4D HC = 1D, 2C, 3B, 4A DS229 LUXEON Altilon Intense 1x2 Product Datasheet Lumileds Holding B.V. All rights reserved. 11

13 Color Bin Definitions Table 7. Color bin definitions for LUXEON Altilon Intense 1x2. BIN x [1, 2]] y [1, 2] 6-DIGIT IEC CODE [3] 2B 2D 4B 4D 2A 2C 4A 4C TYPICAL CCT BIN x [1, 2] y [1, 2] 6-DIGIT IEC CODE [3] ebvg K 1B ebyg K 1D ecbg K 3B eceg K 3D ebvd K 1A ebyd K 1C ecbd K 3A eced K 3C Notes for Table 7: 1. Lumileds maintains a tester tolerance of ±0.005 on x and y color coordinates. 2. CIE 1931 x and y coordinate frame. 3. Per IEC/ PAS fbwa23 fbya33 fcba33 fcea33 fbwd23 fbyd33 fcbd33 fced33 TYPICAL CCT 6390K 6050K 5680K 5350K 6390K 6050K 5680K 5350K DS229 LUXEON Altilon Intense 1x2 Product Datasheet Lumileds Holding B.V. All rights reserved. 12

14 Forward Voltage Bins Table 8. Forward voltage bin definitions for LUXEON Altilon Intense 1x2. BIN MINIMUM FORWARD VOLTAGE [1] (V f ) MAXIMUM A B C Notes for Table 8: 1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Several bins are outlined; product availability in a particular bin varies by production run and product performance. Mechanical Dimensions 2.70 ± ANGULARITY TOLERANCE 2.5 AT 2 PLACES ±0.050 (0.16) (4X) LINE WIDTH Max 0.12 (4X) 0.74 C L ± X LIGHT EMITTER TOLERANCES (UNLESS OTHERWISE SPECIFIED) LINEAR: XX. 0.1mm XX.X 0.05mm XX.XX 0.025mm ANGULAR: XX. 230' XX.X 1 XX.XX 030' Figure 12. Mechanical dimensions for LUXEON Altilon Intense 1x2. Notes for Figure 12: 1. Drawings are not to scale. 2. All dimensions are in millimeters. DS229 LUXEON Altilon Intense 1x2 Product Datasheet Lumileds Holding B.V. All rights reserved. 13

15 Reflow Soldering Guidelines Figure 13. Visualization of the acceptable reflow temperature profile as specified in Table 9. Table 9. Reflow profile characteristics for LUXEON Altilon Intense 1x2. PROFILE FEATURE LEAD FREE ASSEMBLY Preheat Minimum Temperature (T smin ) 150 C Preheat Maximum Temperature (T smax ) 200 C Preheat Time (t smin to t smax ) Ramp-Up Rate (T smax to T p ) 60 to 180 seconds 3 C / second maximum Liquidus Temperature (T L ) 217 C Time Maintained Above Temperature T L (t L ) 60 to 150 seconds Peak / Classification Temperature (T p ) 260 C Time Within 5 C of Actual Temperature (t p ) Ramp-Down Rate Time 25 C to Peak Temperature Notes for Table 9: 1. All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body. 20 to 40 seconds 6 C / second maximum 8 minutes maximum DS229 LUXEON Altilon Intense 1x2 Product Datasheet Lumileds Holding B.V. All rights reserved. 14

16 Packaging and Labeling Information Pocket Tape Dimensions ± ± ± B 1.75 ± ±0.10 (Bo) A A 5.50 ± ±0.15 SECTION B-B 5 Max ±0.10 B 1.50 Min 1 Carrier tape ±0.10 (Ko) ± Cover tape, thickness (20 ) 3.25 ±0.10 (Ao) 5 Max SECTION A-A Figure 14. Pocket tape dimensions for LUXEON Altilon Intense 1x2. Notes for Figure 14: 1. Drawings are not to scale. 2. All dimensions are in millimeters. Reel Dimensions 1.1 ±0.1 (2X) LABEL ANODE CATHODE LED ELECTRICAL ORIENTATION 20.0 ± ±0.5 HUB DIA 63.3 ±0.2 B 20.0 ±0.5 A UNIT LABEL DIRECTION OF UNREELING 13.4 ±1.0 1) LEADER LENGTH 150 POCKETS (MINIMUM) 2) TRAILER LENGTH 90 POCKETS (MINIMUM) 2.0 ±0.5 (3X) DATE CODE ANODE PAD CAVITY CODE YEAR CODE Notes for Figure 15: 1. Drawings are not to scale. 2. All dimensions are in millimeters. CATHODE PAD DETAIL A DETAIL B ARBOR HOLE Figure 15. Reel dimensions for LUXEON Altilon Intense 1x2. DS229 LUXEON Altilon Intense 1x2 Product Datasheet Lumileds Holding B.V. All rights reserved. 15

17 Product Labeling (1) (2) (3) (4) (5) (10) (6) (7) (8) (9) Figure 16. Example of box label for LUXEON Altilon Intense 1x2. Notes for Figure 16 Box Label descriptions for customer use: Field labels not described are for Lumileds internal use only. 1. Material number. 2. Total number of LED emitters in a box. 3. Lumileds part number. 4. Customer part number. 5. LED test date in YYWW format. 6. Pattern. 7. Lot identification number. This number is required for traceability purposes. 8. Country of origin. 9. Product bin 4-digit alphanumeric CAT code. 10. Production order. DS229 LUXEON Altilon Intense 1x2 Product Datasheet Lumileds Holding B.V. All rights reserved. 16

18 About Lumileds Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with them to push the boundaries of light. With over 100 years of inventions and industry firsts, Lumileds is a global lighting solutions company that helps customers around the world deliver differentiated solutions to gain and maintain a competitive edge. As the inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation, quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is making the world better, safer, more beautiful with light. To learn more about our lighting solutions, visit lumileds.com Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com DS229 LUXEON Altilon Intense 1x2 Product Datasheet Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided as is, and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. A listing of Lumileds product/patent coverage may be accessed at lumileds.com/patents.