PS , PS A, PS C Intellimod Module Dual-In-Line Intelligent Power Module 3 Amperes/600 Volts
|
|
- Isaac Cox
- 5 years ago
- Views:
Transcription
1 PS , PS A, Dual-In-Line Intelligent Power Module R A D N O P DTAIL "A" X K K V G F H C J L DTAIL "B" AD A PS / PS A AD A R O A N D P X K C L M SID AD DTAIL "B" AG U P R SID Outline Drawing and Circuit Diagram 5 DTAIL "A" PS PS A DTAIL "C" Z 23 Dimensions Inches Millimeters A 1.50± ±0.5 B 0.94± ±0.5 C D ± ±0.5 F 0.74± ±0.5 G 1.15± ±0.5 H J K L 0.06± ±0.05 M N 1.39± ±0.3 O 0.07± ±0.2 P Q R AJ T AF Q AC B G H M AB (PS / ) AA (PS A) 1 (VNC) 2 VUFB 3 VVFB 4 VFB 5 UP 6 VP 7 P 8 VP1 9 VNC* 10 UN J DTAIL "B" SID AH S DTAIL "C" TRMINAL COD 11 VN 12 N 13 VN1 14 FO 15 CIN 16 VNC* 17 NC 18 NC 19 NC 20 N *Use either Pin 9 or Pin 16 for the ground connection V 23 U 24 P 25 NC PS / PS A DTAIL "A" Dimensions Inches Millimeters S T U 0.1± ±0.2 V 1.33± ± X Y Z AA 0.55± ±0.5 AB 0.37± ±0.5 AC 0.22± ±0.5 AD 0 ~ 5 0 ~ 5 A 0.06 Min. 1.5 Min. AF AG Rad. 1.6 Rad. AH Min. 3.0 Min. AJ Min. 2.5 Min. Y Y Description: DIP-IPMs are intelligent power modules that integrate power devices, drivers, and protection circuitry in an ultra compact dual-in-line transfer-mold package for use in driving small three phase motors. Use of 5th generation IGBTs, DIP packaging, and application specif ic HVICs allow the designer to reduce inverter size and overall design time. Features: Compact Packages Single Power Supply Integrated HVICs Direct Connection to CPU Reduced R th Applications: Refrigerators Air Conditioners Small Servo Motors Small Motor Control Ordering Information: PS is a 600V, 3 Ampere short pin DIP Intelligent Power Module. PS A long pin type zigzag pin type
2 Absolute Maximum Ratings, T j = 25 C unless otherwise specified PS , PS A Characteristics Symbol Units Power Device Junction Temperature* T j -20 to 125 C Storage Temperature T stg -40 to 125 C Case Operating Temperature (Note 1) T C -20 to 100 C Mounting Torque, M3 Mounting Screws 6.9 in-lb Module eight (Typical) 10 Grams Heatsink Flatness (Note 2) -50 to 100 µm Self-protection Supply Voltage Limit (Short Circuit Protection Capability)** V CC(prot.) 400 Volts Isolation Voltage, AC 1 minute, 60Hz Sinusoidal, Connection Pins to Heatsink Plate V ISO 1500 Volts *The ma ximum junction temperature rating of the power chips integrated within the DIP-IPM is 150 C (@T C 100 C). However, to ensure safe operation of the DIP-IPM, the average junction temperature should be limited to T j(avg) 125 C (@T C 100 C). **V D = 13.5 ~ 16.5V, Inverter Part, T j = 125 C, Non-repetitive, Less than 2µs IGBT Inverter Sector Collector-mitter Voltage V CS 600 Volts ach Collector Current, ± (T C = 25 C) I C 3 Amperes ach Peak Collector Current, ± (T C = 25 C, Less than 1ms) I CP 6 Amperes Supply Voltage (Applied between P - N) V CC 450 Volts Supply Voltage, Surge (Applied between P - N) V CC(surge) 500 Volts Collector Dissipation (T C = 25 C, per 1 Chip) P C 21.3 atts Control Sector Supply Voltage (Applied between V P1 -V NC, V N1 -V NC ) V D 20 Volts Supply Voltage (Applied between V UFB -U, V VFB -V, V FB -) V DB 20 Volts Input Voltage (Applied between U P, V P, P -V NC, U N, V N, N -V NC ) V IN -0.5 ~ V D +0.5 Volts Fault Output Supply Voltage (Applied between F O -V NC ) V FO -0.5 ~ V D +0.5 Volts Fault Output Current (Sink Current at F O Terminal) I FO 1 ma Current Sensing Input Voltage (Applied between C IN -V NC ) V SC -0.5 ~ V D +0.5 Volts Note 1 T C Measure Point Note 2 Flatness Measurement Position CONTROL TRMINALS DIP-IPM MASURMNT POINT 11.6mm 3.0mm + 4.6mm IGBT CHIP FDi CHIP POR TRMINALS T C POINT SID + PLAC TO CONTACT A
3 lectrical and Mechanical Characteristics, T j = 25 C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units IGBT Inverter Sector Collector-mitter Saturation Voltage V C(sat) V D = V DB = 15V, I C = 3A, V IN = 5V, T j = 25 C Volts V D = V DB = 15V, I C = 3A, V IN = 5V, T j = 125 C Volts Diode Forward Voltage V C -I C = 3A, V IN = 0V Volts Inductive Load Switching Times t on V CC = 300V, µs t rr V D = V DB = 15V, 0.30 µs t C(on) I C = 3A, T j = 125 C, µs t off V IN = 0 5V, µs t C(off) Inductive Load µs Collector Cutoff Current I CS V C = V CS, T j = 25 C 1.0 ma Control Sector V C = V CS, T j = 125 C 10 ma Circuit Current I D V IN = 5V Total of V P1 -V NC, V N1 -V NC 2.80 ma V D = V DB = 15V V UFB -U, V VFB -V, V FB ma V IN = 0V Total of V P1 -V NC, V N1 -V NC 2.80 ma V UFB -U, V VFB -V, V FB ma Fault Output Voltage V FOH V SC = 0V, F O Terminal Pull-up to 5V by 10kΩ 4.9 Volts V FOL V SC = 1V, I FO = 1mA 0.95 Volts Input Current I IN V IN = 5V ma Short Circuit Trip Level* V SC(ref) V D = 15V* Volts Supply Circuit Under-voltage UV DBt Trip Level, T j 125 C Volts UV DBr Reset Level, T j 125 C Volts UV Dt Trip Level, T j 125 C Volts UV Dr Reset Level, T j 125 C Volts Fault Output Pulse idth** t FO 20 µs ON Threshold Voltage V th(on) Applied between Volts OFF Threshold Voltage V th(off) U P, V P, P -V NC, Volts ON/OFF Threshold Hysteresis Voltage V th(hys) U N, V N, N -V NC Volts * Short Circuit protection is functioning only for the low-arms. Please select the value of the external shunt resistor such that the SC trip level is less than 1.7 times the current rating. **Fault signal is asserted only for a UV or SC condition on the low side. On a SC fault the FO duration will be 20µsec. On a UV condition the fault signal will be asserted as long as the UV condition exists or for 20µsec, whichever is longer. 3
4 Thermal Characteristics Characteristic Symbol Condition Min. Typ. Max. Units Junction to Case R th(j-c)q Inverter RC-IGBT (Per 1/6 Module) 4.7 C/att Recommended Conditions for Use Characteristic Symbol Condition Min. Typ. Value Units Supply Voltage V CC Applied between P-N Terminals Volts Control Supply Voltage V D Applied between V P1 -V NC, V N1 -V NC Volts V DB Applied between V UFB -U, Volts V VFB -V, V FB - Control Supply Variation dv D, dv DB -1 1 V/µs Arm Shoot-through Blocking Time t DAD For ach Input Signal, T C 100 C 1.5 µs Allowable Minimum Input P IN(on) 0.5 µs Pulse idth* P IN(off) 0.5 µs V NC Voltage Variation V NC Between V NC -N (Including Surge) Volts *DIP-IPM might not make response or work properly if the input signal plus width is less than the recommended minimum value.
5 Application Circuit
6 Protection Function Timing Diagrams Short-Circuit Protection (Lower-arms only with the external shunt resistor and RC filter) LOR-ARMS CONTROL INPUT A6 A7 PROTCTION CIRCUIT STAT ST INTRNAL IGBT GAT A3 A1 A2 SC A4 OUTPUT CURRNT I C A8 SNS VOLTAG OF TH SHUNT RSISTOR FAULT OUTPUT F O A5 SC RFRNC VOLTAG CR CIRCUIT TIM CONTAINS DLAY (NOT) A1: Normal operation IGBT turn on and conducting current. A2: Short-circuit current detected (SC trigger). A3: IGBT gate hard interrupted. A4: IGBT turn off. A5: F O output with a fixed pulse width of t FO(min) = 20µs. A6: Input L IGBT off. A7: Input H IGBT on is blocked during the F O output period. A8: IGBT stays in off state. Under-Voltage Protection (Lower-side, UV D ) CONTROL INPUT PROTCTION CIRCUIT STAT ST UV Dr CONTROL SUPPLY VOLTAG V D B1 UV Dt B3 B6 B2 B4 B7 OUTPUT CURRNT I C FAULT OUTPUT F O B5 B1: Control supply voltage rise After the voltage level reaches UV Dr, the drive circuit begins to work at the rising edge of the next input signal. B2 : Normal operation IGBT turn on and conducting current. B3: Under-voltage trip (UV Dt ). B4: IGBT turn off regardless of the control input level. B5: F O output during under-voltage period, however, the minimum pulse width is 20µs. B6: Under-voltage reset (UV Dr ). B7: Normal operation IGBT turn on and conducting current.
7 Protection Function Timing Diagrams Under-Voltage Protection (Upper-side, UV DB ) CONTROL INPUT PROTCTION CIRCUIT STAT ST CONTROL SUPPLY VOLTAG V DB UV DBr C1 UV Dt C3 C5 C2 C4 C6 OUTPUT CURRNT I C FAULT OUTPUT F O HIGH LVL (NO FAULT OUTPUT) C1: Control supply voltage rises After the voltage level reaches UV DBr, the drive circuit begins to work at the rising edge of the next input signal. C2: Normal operation IGBT turn on and conducting current. C3: Under-voltage trip (UV DBt ). C4: IGBT stays off regardless of the control input level, but there is no F O signal output. C5: Under-voltage reset (UV Dr ). C6: Normal operation IGBT turn on and conducting current. Typical Interface Circuit 5V LIN MCU 10kΩ DIP-IPM U P, V P, P, U N, V N, N 3.3kΩ (MIN) F O V NC (LOGIC) NOT: RC coupling at each input (parts shown dotted) may change depending on the PM control scheme used in the application and the wiring impedance of the printed circuit board. The DIP-IPM input signal section integrates a 3.3kΩ (min) pull-down resistor. Therefore, when using an external filtering resistor, care must be taken to satisfy the turn-on threshold voltage requirement. iring Method Around Shunt Resistor DIP-IPM iring inductance should be less than 10nH. (quivalent to the inductance of a copper pattern with length = 17mm, width = 3mm, and thickness = 100um.) V NC N R SHUNT (Chip type resistor is recommended.) This GND wiring from V NC should be as close to the shunt resistors as possible. 7
PS21965, PS21965-A, PS21965-C Intellimod Module Dual-In-Line Intelligent Power Module 20 Amperes/600 Volts
S21965, S21965-A, S21965-C Dual-In-Line Intelligent ower Module R O A D N X K C L DD 17 16 15 14 13 12 11 10 S21965-C 9 8 7 6 5 4 DTAIL "A" 3 2 1 K F V G H J DTAIL "B" S21965 / S21965-A DD R O A D N X
More informationPS , PS A, PS C Intellimod Module Dual-In-Line Intelligent Power Module 20 Amperes/600 Volts
PS21965-4, PS21965-4A, PS21965-4C Dual-In-Line Intelligent Power Module R A D N O P 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 PS21965-4C DETAIL "A" X K K V G F E H C J L DETAIL "B" AD AE PS21965-4 / PS21965-4A
More informationPS S Intellimod Module Dual-In-Line Intelligent Power Module 20 Amperes/600 Volts
Dual-In-Line Intelligent Power Module R O A D N P X K C L AF R P 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 18 19 20 U HEATSINK SIDE Outline Drawing and Circuit Diagram Dimensions Inches Millimeters A 1.50±0.02
More informationPS , PS A, PS C Intellimod Module Dual-In-Line Intelligent Power Module 5 Amperes/600 Volts
PS21962-4, PS21962-4A, PS21962-4C Dual-In-Line Intelligent Power Module R A D N O P 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 PS21962-4C DETAIL "A" X K K V G F E H C J L DETAIL "B" AD AE PS21962-4 / PS21962-4A
More informationPS21963-S Intellimod Module Dual-In-Line Intelligent Power Module 10 Amperes/600 Volts
Dual-In-Line Intelligent Power Module R O A D N P X K C L FF R U 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 18 19 20 HEATSINK SIDE Outline Drawing and Circuit Diagram 21 Dimensions Inches Millimeters A
More informationC L DETAIL "B" TERMINAL CODE 1 (VNC) 2 VUFB 3 VVFB 4 VWFB 5 UP 6 VP 7 WP 8 VP1 9 VNC* 10 UN 11 VN 12 WN 13 VN1 HEATSINK SIDE
Dual In-line Intelligent Power Module R S A N D P X K C L AG U P 17 18 16 19 HEATSINK SIDE Y 15 R 14 20 13 12 11 21 10 9 Outline Drawing and Circuit Diagram 8 Dimensions Inches Millimeters A 1.50±0.02
More informationPS21353-GP. Intellimod Module Dual-In-Line Intelligent Power Module 10 Amperes/600 Volts
Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Dual-In-Line Intelligent Power Module Outline Drawing and Circuit Diagram Dimensions Inches Millimeters A 1.93 49.0 B
More informationAB (2 PLACES) 30 NC 31 P 33 V 34 W
Dual-In-Line Intelligent Power Module A D G H R DUMMY PINS J K L Q C HEATSINK SIDE B 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 29 30 E E E F 9 8 F 7 6 5 4 3 2 1 M P 35 35 34 33 32 31 N P
More informationPS21265-P PS21265-AP Intellimod Module Dual-In-Line Intelligent Power Module 20 Amperes/600 Volts
PS21265-P PS21265-AP Dual-In-Line Intelligent Power Module H A DETAIL "A" HEATSINK SIDE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 M B K P N J 22 23 24 25 26 C L Q DETAIL "A" W G DETAIL "C"
More informationPS21867-P. Intellimod Module Dual-In-Line Intelligent Power Module 30 Amperes/600 Volts
Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Dual-In-Line Intelligent Power Module J A N M C BB P B AA 27 28 30 31 33 35 21 1 2 3 4 29 5 6 7 8 32 9 1 12 13 34
More informationN P HEATSINK SIDE 25 UN 26 VUFB 27 UP 30 NC 31 NC 32 NC 33 NC 34 NC 35 NC 28 U(VUFS) 29 NC
Single-In-Line Intelligent Power Module A D G H J K L M N P C W X E 35 34 33 32 31 30 Y V (2 PLACES) F PS21661-RZ AA AK AJ Z B 1 3 2 5 4 7 6 9 8 11 3 12 15 14 17 16 19 18 21 25 26 27 28 20 22 23 24 29
More informationPS21562-P. Intellimod Module Dual-In-Line Intelligent Power Module 5 Amperes/600 Volts
Dual-In-Line Intelligent Power Module A D DUMMY PINS K H L Q R C B 28 27 29 30 26 25 24 23 22 21 20 19 18 17 16 15 14 13 LABEL E E E F 12 11 10 9 8 F 7 6 5 4 3 2 1 M C L P 35 HEATSINK SIDE 35 34 33 32
More informationPS21767 Intellimod Module Dual-In-Line Intelligent Power Module 30 Amperes/600 Volts
ual-in-line Intelligent Power Module B Z H AE AF AJ AK Z AH T E AA AB G F F F F F 28 27 26 25 24 23 22 21 20 19 1817 16 15 14 13 12 1110 9 8 7 6 5 4 3 2 1 31 29 30 32 33 ETAIL "" AB C A ETAIL "A" ETAIL
More informationApplied between V UFB -V UFS, V VFB -V VFS,V WFB -V WFS. Applied between U P,V P,W P -V PC, U N,V N,W N -V NC
Maximum Ratings (Tj=25 C, unless otherwise noted) : Inverter Part: Item Symbol Condition Rating Unit Supply voltage CC Applied between P-NU,N,NW 450 Supply voltage (surge) CC(surge) Applied between P-NU,N,NW
More informationPS11035 Intellimod Module Application Specific IPM 20 Amperes/600 Volts
F A D E G U W X C 2 1 3 5 4 6 7 8 10 14 9 11 12 13 15 16 (S) B J K L M AA BB S T V 21 22 23 24 25 26 27 28 29 30 FF 1 CBU+ 2 CBU- 3 CBV+ 4 CBV- 5 CBW+ 6 CBW- 7 VD 8 UP Outline Drawing and Circuit Diagram
More informationN 36 NU 37 W 38 V 39 U 40 P 41 U 42 V
Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 Dual-In-Line Intelligent Power Module J K Q V 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1718 19 29 41 42 B M (2 PLACES) L (5
More informationPS11036 Intellimod Module Application Specific IPM 30 Amperes/600 Volts
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 A D G H G J K M L GG EE (4 PLACES) BB N P 12 3 4 5 6 7 8 9 10 111213 14 1516 T S Q R U 21 22 23 24 25 26 27 28 29 W V X Z LABEL Outline Drawing and Circuit Diagram
More informationMitsubishi Semiconductors <Dual-In-Line Package Intelligent Power Module> PS21865 Transfer-Mold Type Insulated Type
Pre DS.Kou,M.Sakai,F.Tametani Rev D D S.Kou,T.Iwagami,F.Tametani Apr DM.Fukunaga 02-8/9 M.Fukunaga 03-8/6 Applications : AC100V 200V three-phase inverter drive for small power motor control. Integrated
More informationY Y D T SQ PIN (10 PLS) L N TERMINAL CODE 5 : FNO 4 : VNC N 3 : CN1 2 : NC 1 : VN1 5 : FPO 4 : VPC P 3 : CP1 2 : NC 1 : VP1. FWDi IGBT C2E1.
PM8DV1B6 Powerex, Inc., 173 Pavilion Lane, oungwood, Pennsylvania 1697 (724) 92-7272 www.pwrx.com Single Phase IGBT Inverter Output 8 Amperes/6 Volts F (4 PLACES) A C U V B E H (3 TP) C2E1 E2 C1 4 3 2
More informationMITSUBISHI INTELLIGENT POWER MODULES PM800HSA060 FLAT-BASE TYPE INSULATED PACKAGE
PM8HSA6 A K J L M LABEL V (2 REQD) C E R E B W 5 FO 4 VC CI 2 SR 1 V1 U φ (4 HOLES) G S φ (2 PLS) TYP Q 12 4 5 F D T SQ PIN (5 PLS) P H C Description: Mitsubishi Intelligent Power Modules are isolated
More informationU (2 TYP.) T WFO VUPC IN F O GND GND OUT OT OUT OT S I
Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Three Phase IGBT Inverter W (6 PLACES) X (4 PLACES) AD AA W A B K K L Z V Z U AG Z AB AE AG B N P AC AC AH M M AF
More informationApplication Note Mitsubishi Semiconductors <Dual-In-Line Package Intelligent Power Module> PS21867 Transfer-Mold Type Insulated Type
Application Note Mitsubishi Semiconductors Insulated Type Pre. T.Iwagami Rev. F S.Kou, T.Iwagami, F.Tametani Apr. M.Iwasaki 01-12/21 M.Fukunaga 03-8/6 Applications
More informationU P V VPI VFO WFO UP UFO V VPC GND GND
N A C D Q Q Q 1 234 5678 9 11 13 15 17 2 14 16 18 V (14 TYP.) R (2 TYP.) 1. VUPC 2. UFO 3. UP 4. VUPI 5. VVPC 6. VFO 7. VP 8. VVPI 9. VWPC 10. WFO 11. WP 12. VWPI 13. 14. 15. 16. 17. 18. 19. 20. 21. 22.
More informationU P V VPI VFO R (2 TYP.) WFO UP UFO V VPC GND GND
N A C D Q Q Q 1 234 5678 9 11 13 15 17 2 14 16 18 V (14 TYP.) R (2 TYP.) 1. VUPC 2. UFO 3. UP 4. VUPI 5. VVPC 6. VFO 7. VP 8. VVPI 9. VWPC 10. WFO 11. WP 12. VWPI 13. 14. 15. 16. 17. 18. 19. 20. 21. 22.
More informationT - 4 TYP. XØ (2 PLACES) W SQ. PIN (10 PLACES) TERMINAL CODE 1. VN1 2. SNR 3. CN1 4. VNC 5. FNO VP1 RFO AMP E2 C2E1 C1
PM2DVA12 Powerex, Inc., 2 Hillis Street, Youngwood, Pennsylvania 15697-18 (724) 925-7272 Single Phase IGBT Inverter Output 2 Amperes/12 Volts A D T - 4 TYP. XØ (2 PLACES) B E F J H R S NUTS - 3 TYP. U
More informationPM300DSA060 Intellimod Module Single Phase IGBT Inverter Output 300 Amperes/600 Volts
Powerex, Inc., 2 Hillis Street, Youngwood, Pennsylvania 15697-18 (724) 925-7272 PM3DSA6 Single Phase IGBT Inverter Output 3 Amperes/6 Volts G A B G J N T - DIA. (2 TYP.) N SIDE 1. VN1 2. SNR 3. CN1 4.
More informationPM30CSJ060 Intellimod Module Three Phase IGBT Inverter Output 30 Amperes/600 Volts
Three Phase IGBT Inverter Output N A C D Q Q Q 1 234 5678 9 11 13 15 17 2 14 16 18 V (14 TYP.) R (2 TYP.) 1. VUPC 2. UFO 3. UP 4. VUPI 5. VVPC 6. VFO 7. VP 8. VVPI 9. VWPC 1. WFO 11. WP 12. VWPI 13. 14.
More informationV VPI V (14 TYP.) VFO R (2 TYP.) WFO UP UFO V VPC GND GND GND GND GND GND VCC
Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Three Phase IGBT Inverter Output N A C D Q Q Q 1 234 5678 9 11 13 15 17 2 14 16 18 V (14 TYP.) R (2 TYP.) 1. VUPC 2.
More informationPS22A78-E Transfer-Mold Type Insulated Type
Pre. K.Kuriaki,T.Iwagami,T.Nagahara.Iwagami,T.Nagahara Apr. Y.Nagashima 29-Jan- 07 Rev. D T.Nagahara,M.Sakai,Shang,T.Nakano T.Iwagami 4-Jul.- 08 Applications : 0.2~5.5kW/AC400Vrms three-phase motor variable
More informationAPPLICATION AC100V~200V three-phase inverter drive for small power motor control (1.96) 17.7 (3.5) 35.9 ±0.5 (5.5)
MITSUBISHI SEMICONDUCTOR TYPE TYPE INTEGRATED POWER FCTIONS 600/30A low-loss CSTBT TM inverter bridge with N-side three-phase output DC-to-AC power
More informationPS21562-SP PS21562-SP. APPLICATION AC100V~200V inverter drive for small power motor control. PS21562-SP
MITSUBISHI SEMICONDUCTOR TYPE TYPE INTEGRATED POWER FUNCTIONS 600/5A low-loss 5 th generation IGBT inverter bridge for three phase DC-to-AC power conversion.
More informationSLIMDIP-L TRANSFER MOLDING TYPE INSULATED TYPE
OUTLINE MAIN FUNCTION AND RATINGS RC-IGBT inverter bridge for three phase DC-to-AC power conversion Built-in bootstrap diodes with current limiting resistor Open emitter type APPLICATION AC 100~240V (DC
More informationPM25RSB120 Intellimod Module Three Phase + Brake IGBT Inverter Output 25 Amperes/1200 Volts
PM25RSB12 Three Phase + Brake IGBT Inverter Output 25 Amperes/12 Volts U L Q K J AD AC FO N AD Outline Drawing and Circuit Diagram Dimensions Inches Millimeters V A 3.96 ±.4 1.5 ± 1. B 3.48 ±.2 88.5 ±.5
More informationPS21661-RZ/FR PS21661-FR. APPLICATION AC100V~200V, three-phase inverter drive for small power motor control.
MITSUBISHI SEMICONDUCTOR TYPE TYPE PS21661-RZ PS21661-FR INTEGRATED POWER FUNCTIONS 600/3A low-loss 5th generation IGBT inverter bridge for 3 phase
More informationFPAM30LH60 PFC SPM 2 Series for 2-Phase Interleaved PFC
FPAM30LH60 PFC SPM 2 Series for 2-Phase Interleaved PFC Features Low Thermal Resistance Thanks to Al 2 O 3 DBC Substrate 600 V - 30 A 2-Phase Interleaved PFC Including A Drive IC for Gate Driving and Protection
More informationAPPLICATION AC100V~200V three-phase inverter drive for small power motor control (1.96) 17.7 (12.78) (3.5) 35.9 ±0.5 (5.5) (13.5)
MITSUBISHI SEMICONDUCTOR TEGRATED POWER FUNCTIONS TYPE TYPE 600/30A low-loss CSTBT TM inverter bridge with N-side three-phase output DC-to-AC power
More informationFBA42060 PFC SPM 45 Series for Single-Phase Boost PFC
FBA42060 PFC SPM 45 Series for Single-Phase Boost PFC Features UL Certified No. E209204 (UL1557) 600 V - 20 A Single-Phase Boost PFC with Integral Gate Driver and Protection Low Thermal Resistance Using
More informationPS21A79 MAIN FUNCTION AND RATINGS 3 phase inverter with N-side open emitter structure 600V / 50A (CSTBT)
MAIN FUNCTION AND RATINGS 3 phase inverter with N-side open emitter structure 600V / 50A (CSTBT) APPLICATION AC100 ~ 200Vrms class, motor control INTEGRATED DRIVE, PROTECTION AND SYSTEM CONTROL FUNCTIONS
More informationPSS15S92F6-AG PSS15S92E6-AG TRANSFER MOLDING TYPE INSULATED TYPE
PSS15S92F6-AG PSS15S92E6-AG OUTLINE MAIN FUNCTION AND RATINGS 3 phase DC/AC inverter 600V / 15A (CSTBT) N-side IGBT open emitter Built-in bootstrap diodes with current limiting resistor APPLICATION AC
More informationPM75DSA120 Intellimod Module Single Phase IGBT Inverter Output 75 Amperes/1200 Volts
ingle Phase IGBT Inverter Output C L G A B G C2E1 E2 C1 G U N 1 2 3 4 5 M D T - DIA. (4 TYP.) N IDE 1. VN1 2. NR 3. CN1 4. VNC 5. FNO P IDE 1. VP1 2. PR 3. CP1 4. VPC 5. FPO 1 2345 P Q - DIA. (2 TYP.)
More informationV VPC V FO V WPI W FO W UP UFO V VPI GND GND GND GND V CC OUT OUT. Dimensions Inches Millimeters L
MITSUBISHI TELLIGET POWER MODULES SULATED PACKAGE D R - DIA. (4 TYP.) E H U V J 12 A B 34 7 5 6 8 9 11 13 15 17 19 T (15 TYP.) Q (4 TYP.) 10 12 14 16 18 U V P B W L M M M M M G 6.0 ± 0.1 X 0.8 ± 0.1 MM
More informationFPDB40PH60B PFC SPM 3 Series for 2-Phase Bridgeless PFC
FPDB40PH60B PFC SPM 3 Series for 2-Phase Bridgeless PFC Features UL Certified No. E209204 (UL1557) 600 V - 40 A 2-Phase Bridgeless PFC with Integral Gate Driver and Protection Very Low Thermal Resistance
More informationTYP K "T" (4 TYP) TYP TYP UP UFO V VPI GND GND GND GND IN V CC OUT S I
MITSUBISHI TELLIGENT POWER MODULES PM7RSK6 SULATED PACKAGE B D. UPC. UFO. UP. UPI. PC 6. FO 7. P 8. PI 9. WPC. WFO. WP. WPI. NC. NI. BM 6. UN 7. N 8. WN 9. FO. P. BR... N U. W A E W F G H P J K L 6 7 8
More information< Dual-In-Line Package Intelligent Power Module > PSS25SA2FT TRANSFER MOLDING TYPE INSULATED TYPE
OUTLINE MAIN FEATURES AND RATINGS 3 phase DC/AC inverter 1200V / 25A Built-in LPT-CSTBT (6th generation IGBT) Built-in bootstrap diodes with current limiting resistor Insulated transfer molding package
More informationPSM03S93E5-A TRANSFER MOLDING TYPE INSULATED TYPE
OUTLINE MAIN FUNCTION AND RATINGS 3 phase DC/AC inverter 500V / 3A (MOSFET) N-side MOSFET open source Built-in bootstrap diodes with current limiting resistor APPLICATION AC 100~240Vrms(DC voltage:400v
More informationPSS20S51F6 / PSS20S51F6-C TRANSFER MOLDING TYPE INSULATED TYPE
OUTLINE MAIN FUNCTION AND RATINGS 3 phase DC/AC inverter 600V / 20A (CSTBT) N-side IGBT open emitter Built-in bootstrap diodes with current limiting resistor APPLICATION AC 100~240Vrms(DC voltage:400v
More informationFPDB30PH60 PFC SPM 3 Series for 2-Phase Bridgeless PFC
FPDB30PH60 PFC SPM 3 Series for 2-Phase Bridgeless PFC Features UL Certified No. E209204 (UL1557) 600 V - 30 A 2-Phase Bridgeless PFC with Integral Gate Driver and Protection Very Low Thermal Resistance
More informationPSS10S72FT TRANSFER MOLDING TYPE INSULATED TYPE
OUTLINE MAIN FUNCTION AND RATINGS 3 phase DC/AC inverter 1200V / 10A (CSTBT) N-side IGBT open emitter Built-in bootstrap diodes with current limiting resistor APPLICATION AC 400Vrms(DC voltage:800v or
More informationPSS15MC1FT TRANSFER MOLDING TYPE INSULATED TYPE
OUTLINE MAIN FUNCTION CIB(Converter Inverter Brake) type IPM 3-phase Inverter Brake circuit 3-phase Converter RATING Inverter part : 15A/1200V (CSTBT) APPLICATION AC400V three phase motor inverter drive
More informationPS22A74. < Dual-In-Line Package Intelligent Power Module > Publication Date : January 2012 TRANSFER MOLDING TYPE INSULATED TYPE
OUTLINE MAIN FEATURES AND RATINGS 3 phase DC/AC inverter 1200V / 15A Built-in LPT-CSTBT (5th generation IGBT) Insulated transfer molding package N-side IGBT open emitter APPLICATION AC 400V class motor
More informationLDIP- IPM IM (Preliminary)
LDIP- IPM (Preliminary) Description Cyntec IPM is integrated Drive, protection and system control functions that is designed for high performance 3-phase motor driver application like: Home appliances
More informationL M 1 F O (L) 5 F O (H) DETAIL "A"
MIG6J2CMB1W Powerex, Inc., 2 E. Hillis Street, Youngwood, Pennsylvania 15697-18 (724) 925-7272 Compact IPM Series Dual Module 6 Amperes/6 Volts J A D K L M N W V E2 C1 C DETAIL "A" H B F E C2E1 U W DD
More informationP Q SIGNAL TERMINAL 1 F O (L) 5 F O (H) V S DETAIL "A"
MIG4J2CSB1W Powerex, Inc., 2 E. Hillis Street, Youngwood, Pennsylvania 15697-18 (724) 925-7272 Compact IPM Series Dual Module 4 Amperes/6 Volts J A D K N P Q E W E2 C1 C S F B C2E1 E DETAIL "A" R T U H
More informationPM50RSK060 Intellimod Module Three Phase + Brake IGBT Inverter Output 50 Amperes/600 Volts
Powerex, Inc., 2 Hillis Street, Youngwood, Pennsylvania 15697-18 (724) 925-7272 PM5RSK6 Three Phase + Brake IGBT Inverter Output 5 Amperes/6 olts U J A B EE DD THICK TYPICAL 19 PLACES 12 34 7 5 6 8 9 11
More informationFSBS3CH60 Motion SPM 3 Series Features
FSBS3CH60 Motion SPM 3 Series Features UL Certified No.E209204(SPM27-BA package) 600 V-3 A 3-Phase IGBT Inverter Bridge Including Control ICs for Gate Driving and Protection Three Separate Negative DC-link
More informationPSS25NC1FT TRANSFER MOLDING TYPE INSULATED TYPE
OUTLINE MAIN FUNCTION CI(Converter + Inverter) type IPM 3-phase Inverter 3-phase Converter RATING Inverter part : 25A/1200V (CSTBT) APPLICATION AC400V three phase motor inverter drive * With brake circuit
More informationFPAB30BH60 PFC SPM 3 Series for Single-Phase Boost PFC
FPAB30BH60 PFC SPM 3 Series for Single-Phase Boost PFC Features UL Certified No. E209204 (UL1557) 600 V - 30 A Single-Phase Boost PFC with Integral Gate Driver and Protection Very Low Thermal Resistance
More informationFPAB30BH60B PFC SPM 3 Series for Single-Phase Boost PFC
FPAB30BH60B PFC SPM 3 Series for Single-Phase Boost PFC Features UL Certified No. E209204 (UL1557) 600 V - 30 A Single-Phase Boost PFC with Integral Gate Driver and Protection Very Low Thermal Resistance
More informationSmart Pack Electric Co., Ltd <Intelligent Power Module> SPE10S60F-A TRANSFER-MOLD TYPE FULL PACK TYPE
INTEGRATED POWER FUNCTIONS 600V/10A low-loss 6th generation IGBT inverter bridge for three phase DC-to-AC power conversion. Open emitter type. Figure 1 INTEGRATED DRIVE, PROTECTION AND SYSTEM CONTROL FUNCTIONS
More informationL M DETAIL "A" SIGNAL TERMINAL 3 E(L) 4 V D 5 G(H) 6 F O (H) 7 E(H) 8 OPEN
MG3QYSA Powerex, Inc., E. Hillis Street, Youngwood, Pennsylvania 1597-1 (7) 95-77 Compact IGBT Series Module 3 Amperes/1 Volts J A D K L M N W V E C1 C DETAIL "A" H B F E CE1 U W Outline Drawing and Circuit
More informationL M DETAIL "A" SIGNAL TERMINAL 3 E(L) 4 V D 5 G(H) 6 F O (H) 7 E(H) 8 OPEN
MGQYSA Powerex, Inc., E. Hillis Street, Youngwood, Pennsylvania 1597-1 (7) 95-77 Compact IGBT Series Module Amperes/1 Volts J A D K L M N W V E C1 C DETAIL "A" H B F E CE1 U W Outline Drawing and Circuit
More informationAPPLICATION AC100V~200V three-phase inverter drive for small power motor control. (2.2) 21.4 ±0.5 (10) (11) (10) (4.65) (2.9) 34.9 ± ±0.5 (1.
MITSUBISHI SEMICONDUCTOR TYPE TYPE PS2869 INTEGRTED POWER FUNCTIONS 600/50 low-loss CSTBT inverter bridge for 3 phase DC-to-C power conversion INTEGRTED
More informationFSAM30SH60A Motion SPM 2 Series
FSAM30SH60A Motion SPM 2 Series Features UL Certified No. E209204 600 V - 30 A 3 - Phase IGBT Inverter Bridge Including Control ICs for Gate Driving and Protection Three Separate Open - Emitter Pins from
More informationMotion-SPM FPAB30BH60B. Smart Power Module(SPM ) for Front-End Rectifier. General Description. Features. Applications. April Fig. 1.
FPAB30BH60B Smart Power Module(SPM ) for Front-End Rectifier General Description FPAB30BH60B is an advanced smart power module(spm ) of PFC(Power Factor Correction) that Fairchild has newly developed and
More informationFSB44104A Motion SPM 45 LV Series
FSB44104A Motion SPM 45 LV Series Features UL Certified No.E209204 (UL1557) 40 V, R DS(ON) = 4.1 m Max.) 3-Phase MOSFET Inverter Module with Gate Drivers and Protection Low Thermal Resistance Using Ceramic
More informationFSBB30CH60DF. Motion SPM 3 Series. FSBB30CH60DF Motion SPM 3 Series. Features. General Description. Applications.
FSBB30CH60DF Motion SPM 3 Series Features UL Certified No. E209204 (UL1557) 600 V - 30 A 3-Phase IGBT Inverter with Integral Gate Drivers and Protection Low-Loss, Short-Circuit Rated IGBTs Very Low Thermal
More informationFSBB10CH120D Motion SPM 3 Series
FSBB10CH120D Motion SPM 3 Series Features 1200 V - 10 A 3-Phase IGBT Inverter with Integral Gate Drivers and Protection Low-Loss, Short-Circuit Rated IGBTs Very Low Thermal Resistance Using Al 2 O 3 DBC
More informationM81500FP Intellimod HVIC Single Chip Inverter
M815FP D (TYP.) Q R 33 22 P S A C T U RECOMMENDED MOUNT PAD 1 21 K PIN NUMBER E F V D 1 U PIN 15 U NIN 16 V PIN 17 V NIN 18 W PIN 19 W NIN 2 F O 4 INPUT ACTIVE HIGH V REG INPUT CTROL Outline Drawing and
More informationSmart Pack Electric Co., Ltd <Intelligent Power Module> SPE05M50F-A TRANSFER-MOLD TYPE FULL PACK TYPE
Control Part Applications 500V/5A low-loss MOSFET inverter driver for Small Power AC Motor Drives Figure 1 Features 500V Rds(on)=1.8Ohm(Max)MOSFET 3-Phase inverter with Gate Drivers and protection Separate
More informationS R V U T DETAIL "A" AF AE E1C2 (33) E1C2 (32) Dimensions Inches Millimeters
CM6DXL-24S Powerex, Inc., 73 Pavilion Lane, Youngwood, Pennsylvania 5697 (724) 925-7272 www.pwrx.com Dual IGBTMOD NX-S Series Module D AC K E AB L F R Y Z AA Z AD G H C() C(2) E2(3) E2(4) A B C J K L D
More informationPS21963-ET/-AET/-CET/-ETW TRANSFER-MOLD TYPE INSULATED TYPE
PS21963-ET INTEGRTED POWER FUNCTIONS 600/8 low-loss CSTT TM inverter bridge for three phase DC-to-C power conversion INTEGRTED DRIE, PROTECTION ND SYSTEM CONTROL FUNCTIONS For upper-leg IGTS :, High voltage
More informationVLA500K-01R. Hybrid IC IGBT Gate Driver + DC/DC Converter
Powerex, Inc., 200. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Hybrid IC IGBT Gate Driver + A C B D V D G i V l + V l 1 30 1 2 3 4 6 7 DC-AC CONVRTR 180Ω OPTO COUPLR Outline Drawing
More informationFSBF15CH60BT. Motion SPM 3 Series. FSBF15CH60BT Motion SPM 3 Series. Features. General Description. Applications.
FSBF15CH60BT Motion SPM 3 Series Features UL Certified No. E209204 (UL1557) 600 V - 15 A 3-Phase IGBT Inverter with Integral Gate Drivers and Protection Low-Loss, Short-Circuit Rated IGBTs Built-In Bootstrap
More informationDescription of Terminal Symbols and Terminology
Contents Page 1. Description of Terminal Symbols... 2-2 2. Description of Terminology... 2-3 2-1 1. Description of Terminal Symbols Table 2-1 and 2-2 show the description of terminal symbols and terminology
More informationPM50CLA120. APPLICATION General purpose inverter, servo drives and other motor controls PM50CLA120 FEATURE MITSUBISHI <INTELLIGENT POWER MODULES>
FEATURE a) Adopting new th generation IGBT (CSTBT) chip, which performance is improved by 1µm fine rule process. r example, typical ce(sat)=1.9 @Tj=1 C b) I adopt the over-temperature conservation by Tj
More informationPP400B060-ND. H-Bridge POW-R-PAK IGBT Assembly 400 Amperes/600 Volts
Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com H-Bridge POW-R-PAK IGBT Assembly Q Q J P (8 PLACES) +DC C2E1 R (2 PLACES) PIN 1 N U B M N F DC L (6 PLACES) G
More informationPM25CLA120. APPLICATION General purpose inverter, servo drives and other motor controls PM25CLA120 MITSUBISHI <INTELLIGENT POWER MODULES>
FETURE a) dopting new 5th generation (CSTBT) chip, which performance is improved by 1µm fine rule process. r example, typical ce(sat)=1.9 @Tj=125 b) I adopt the over-temperature conservation by Tj detection
More informationAIM5D05B060M1S. Dual-In-Line Package Intelligent Power Module. Features. External View. Applications. Internal Equivalent Circuit / Pin Configuration
Dual-In-Line Package Intelligent Power Module External View 1 15 16 Size: 33.4 x 15 x 3.6 mm 23 Features UL Recognized: UL1557 File E345245 600V-5A (Trench Shielded Planar Gate IGBT) 3 phase Inverter module
More informationPS21265-P/AP TRANSFER-MOLD TYPE TYPE INSULATED TYPE TYPE
MITSUBISHI SEMICONDUCTOR TYPE TYPE PS21265 INTEGRTED POWER FUNCTIONS 600/20 low-loss 5 th generation IGBT inverter bridge for three phase DC-to-C power
More informationAIM5C05B060N1 Dual-In-Line Package Intelligent Power Module
Dual-In-Line Package Intelligent Power Module External View Features and Functions 15 1 16 23 UL Recognized: UL1557 File E345245 600V-5A (Trench Shielded Planar Gate IGBT) 3 phase Inverter module including
More informationSLLIMM small low-loss intelligent molded module IPM, 3-phase inverter - 15 A, 600 V short-circuit rugged IGBT. Description. Table 1.
SLLIMM small low-loss intelligent molded module IPM, 3-phase inverter - 15 A, 600 V short-circuit rugged IGBT Applications Datasheet - production data 3-phase inverters for motor drives Home appliance,
More informationCP15TD1-24A. DIP-CIB 3Ø Converter + 3Ø Inverter + Brake 15 Amperes/1200 Volts
Outline Drawing and Circuit Diagram Dimensions Inches Millimeters A 2.68±.1 68.±.3 B 1.73±.2 44.±.5 C.58±.4 14.7±.1 D 3.1±.2 79.±.5 E 2.83 72. F.16±.1 4.±.3 G 2.83±.1 72.±.3 H.7 2. J.2±.8 5.±.2 K.87 22.
More informationLarge DIPIPM TM Ver. 4 for Photovoltaic Application
.08 Large DIPIPM TM Ver. 4 for Photovoltaic Application Features 5 th Generation fast Full-gate CSTBT TM Rating: 50V/600V High performance Driver IC for high frequency switching Optional IGBT/FWDi channel
More informationPM200CVA060 PM200CVA060. APPLICATION General purpose inverter, servo drives and other motor controls LABEL PM200CVA060
MITSUBISHI PMC6 PMC6 TYPE PMC6 FETURE φ, 6 Current-sense IGBT for khz switching Monolithic gate drive & protection logic Detection, protection & status indication circuits
More informationTENTATIVE PP225D120. POW-R-PAK TM 225A / 1200V Half Bridge IGBT Assembly. Description:
Description: The Powerex is a configurable IGBT based power assembly that may be used as a converter, chopper, half or full bridge, or three phase inverter for motor control, power supply, UPS or other
More informationPM150RLB060. APPLICATION General purpose inverter, servo drives and other motor controls PM150RLB060.
FLT-BSE TYPE INSULTED PCKGE FETURE a) dopting new 5th generation (CSTBT) chip, which performance is improved by µm fine rule process. r example, typical ce(sat)= @Tj=25 b) I adopt the over-temperature
More informationPM75CL1A120 FLAT-BASE TYPE INSULATED PACKAGE
PMCL1A1 PMCL1A1 FEATURE verter + Drive & Protection IC a) Adopting new th generation Full-Gate CSTBT TM chip b) The over-temperature protection which detects the chip surface temperature of CSTBT TM is
More informationPS22053 PS APPLICATION AC400V 0.2kW~0.75kW inverter drive for small power motor control. PS22053
MITSBISHI SEMIONDTOR TYE TYE INTEGRTED OER FNTIONS 1200/10 low-loss 4 th generation IGBT inverter bridge for 3 phase D-to- power conversion INTEGRTED
More informationFNA V Motion SPM 2 Series. FNA V Motion SPM 2 Series. Features. General Description. Applications.
FNA23060 600 V Motion SPM 2 Series Features UL Certified No. E209204 (UL1557) 600 V - 30 A 3-Phase IGBT Inverter, Including Control ICs for Gate Drive and Protections Low-Loss, Short-Circuit-Rated IGBTs
More informationV (4TYP) U (5TYP) V 0.28 Dia. 7.0 Dia.
QIC68 Preliminary Powerex, Inc., 73 Pavilion Lane, Youngwood, Pennsylvania 697 (724) 9-7272 www.pwrx.com Dual Common Emitter HVIGBT Module 8 Amperes/6 Volts S NUTS (3TYP) F A D F J (2TYP) C N 7 8 H B E
More informationCP10TD1-24A. DIP-CIB 3Ø Converter + 3Ø Inverter + Brake 10 Amperes/1200 Volts
CP1TD1-24A Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 1697-18 (724) 92-7272 1 Amperes/12 Volts Outline Drawing and Circuit Diagram Dimensions Inches Millimeters A 2.68±.1 68.±.3 B 1.73±.2
More informationQID Dual IGBT HVIGBT Module 85 Amperes/6500 Volts
Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com Dual IGBT HVIGBT Module Description: Powerex HVIGBTs feature highly insulating housings that offer enhanced protection
More information<Dual-In-Line Package Intelligent Power Module> Super mini DIPIPM Ver.6 Series APPLICATION NOTE PSS**S92E6-AG/ PSS**S92F6-AG.
Super mini DIPIPM Ver.6 Series APPLICATION NOTE PSS**S92E6-AG/ PSS**S92F6-AG Table of contents CHAPTER 1 INTRODUCTION... 2 1.1 Features of Super mini DIPIPM Ver.6... 2 1.2 Functions... 2 1.3 Target Applications...
More information(0~3 ) HEAT SINK SIDE (3.5) (6.5) (1.5) (0.4) (0.5) (1) (45 ) (30 ) (15 )
ITEGRTED OER FCTIOS 600/5 low-loss 5 th generation inverter bridge for three phase DC-to-C power conversion ITEGRTED DRIE, ROTECTIO D SYSTEM COTROL FCTIOS r upper-leg IGBTS :Drive circuit, High voltage
More informationFSBB15CH60. Motion SPM 3 Series. FSBB15CH60 Motion SPM 3 Series. Features. General Description. Applications. Related Resources
FSBB15CH60 Motion SPM 3 Series Features UL Certified No. E209204 (UL1557) 600 V - 15 A 3-Phase IGBT Inverter with Integral Gate Drivers and Protection Low-Loss, Short-Circuit Rated IGBTs Very Low Thermal
More informationPM150RSE120 FLAT-BASE TYPE TYPE INSULATED PACKAGE
MITSUBISHI FLT-BSE TYE TYE FETURE a) dopting new 4th generation planar IGBT chip, which performance is improved by 1µm fine rule process. b) Using new Diode which is designed
More informationPS21869-P/AP PS21869-P/AP. APPLICATION AC100V~200V inverter drive for small power motor control. PS21869
MITSUBISHI SEMICONDUCTOR TYPE TYPE PS21869 INTEGRTED POWER FUNCTIONS 600/50 CSTBT inverter bridge for three phase DC-to-C power conversion INTEGRTED
More informationAPPLICATION AC100V~200V three-phase inverter drive for small power motor control. (3.556) (1) TERMINAL (0.5) (6.5) (10.5) (1.5) (1.
MITSBISHI SEMICODCTOR TYE TYE TEGRTED OWER FCTIOS 4th generation (planar) IGBT inverter bridge for three phase DC-to-C power conversion. TEGRTED DRIE, ROTECTIO D SYSTEM COTROL
More informationTechnical. Application. Assembly. Availability. Pricing. Phone
6121 Baker Road, Suite 108 Minnetonka, MN 55345 www.chtechnology.com Phone (952) 933-6190 Fax (952) 933-6223 1-800-274-4284 Thank you for downloading this document from C&H Technology, Inc. Please contact
More informationChapter 1. Product Outline
Chapter 1 Product Outline Contents Page 1. Introduction... 1-2 2. Product line-up... 1-4 3. Definition of type name and marking spec... 1-5 4. Package outline dimensions... 1-6 5. Absolute maximum ratings...
More information