SpikeSafe DC Current Source Specifications
|
|
|
- Austen Mason
- 5 years ago
- Views:
Transcription
1 SpikeSafe DC Current Source Specifications Copyright 2017, Vektrex. All rights reserved. SpikeSafe current sources are protected by U.S. and foreign patents. Specifications are subject to change
2 Mode Descriptions Mode Description Typical Application DC Constant current. Any constant current application. LM-85, light measurement, characterization, R&D, production, LM-80, reliability, burn-in Page 2
3 Specifications Model (Max Current) Overall Recommended Min Current 2 339µA 5.9mA 35.7mA Min Voltage 0V Max Voltage 50V, 100V, 200V, 300V, 400V 50V, 100V, 200V 50V Independent Channels/Module 1, 2, 4, 8 Max Power, per Channel 3 200W 400W 800W 1kW 375W Max Power, all Channels 3 1.6kW 3.2kW 6.4kW 8kW 3kW Output Conductor Pairs/Channel 1 Conversion Mode Buck/Boost Buck Low Range Current Max Current 40mA 200mA 400mA Setpoint Resolution 1µA 5µA 10µA Output Current Accuracy 0.05%+10µA 0.04%+175µA 0.2%+1mA Current Measure Accuracy 5 0.7%+200µA 0.4%+5mA 0.1%+1mA 0.5%+5mA High Range Current Max Current 500mA 1A 2A 3A 4A 5A 7.5A Setpoint Resolution 10µA 50µA 100µA 200µA Output Current Accuracy 0.05%+75µA 0.08%+500µA 0.08%+1mA 0.3%+3mA Current Measure Accuracy 5 0.2%+1mA 0.4%+5mA 0.5%+12mA Misc. Nominal Current Ripple 1 DC Ramp Rate: Low Speed Setting DC Ramp Rate: Default Setting DC Ramp Rate: High Speed Setting Current Stability 4 Voltage Monitor Accuracy %+160µA >1A: 0.06% >1A: 0.03%+500µA 10V/s, 50mA/s 10V/s, 500mA/s 1000V/s, 50A/s 70ppm 3%+1V >1A: 0.012%+1mA >1A: 0.03%+1mA Page 3
4 Specifications Model (Max Current) Overall Recommended Min Current mA 71mA 23.6mA 143mA 47.3mA 285mA Min Voltage 0V Max Voltage 50V, 100V, 200V 50V, 100V 50V 50V, 100V, 200V 50V, 100V 50V 50V, 100V, 200V 50V, 100V 50V Independent Channels/Module 1, 2, 4 1, 2 1 Max Power, per Channel 3 1.6kW 1.25kW 750W 3.2kW 2.5kW 1.5kW 6.4kW 5kW 3kW Max Power, all Channels 3 6.4kW 5kW 3kW 6.4kW 5kW 3kW 6.4kW 5kW 3kW Output Conductor Pairs/Channel Conversion Mode Buck Low Range Current Max Current 400mA 800mA 1.6A 3.2A Setpoint Resolution 10µA 20µA 40µA 80µA Output Current Accuracy 0.04%+350µA 0.2%+2mA 0.04%+700µA 0.2%+4mA 0.04%+1.4mA 0.2%+8mA Current Measure Accuracy 5 0.4%+10mA 0.5%+10mA 0.4%+20mA 0.5%+20mA 0.4%+40mA 0.5%+40mA High Range Current Max Current 10A 12.5A 15A 20A 25A 30A 40A 50A 60A Setpoint Resolution 200µA 400µA 800µA 1.6mA Output Current Accuracy 0.08%+2mA 0.3%+6mA 0.08%+4mA 0.3%+12mA 0.08%+8mA 0.3%+24mA Current Measure Accuracy 5 0.4%+10mA 0.5%+10mA 0.4%+20mA 0.5%+20mA 0.4%+40mA 0.5%+40mA Misc. Nominal Current Ripple 1 >1A: 0.012%+2mA <5A: 0.03%+300µA >5A: 0.01%+2mA <5A: 0.05%+250µA >5A: 0.02%+1.8mA <5A: 0.05%+250µA >5A: 0.02%+1.5mA <5A: 0.05%+250µA >5A: 0.02%+4mA DC Ramp Rate: Low Speed Setting 10V/s, 100mA/s 10V/s, 200mA/s 10V/s, 400mA/s DC Ramp Rate: Default Setting 10V/s, 1A/s 10V/s, 2A/s 10V/s, 4A/s DC Ramp Rate: High Speed Setting 1000V/s, 100A/s 1000V/s, 200A/s 1000V/s, 400A/s Current Stability 4 70ppm Voltage Monitor Accuracy 5 3%+1V <10A: 0.05%+200µA >10A: 0.02%+3mA Page 4
5 Specifications Available Packages M-Module 2U-Chassis External Interfaces Remote Pause Remote Disable Output Current Drive Type Output Cabling Recommended Max Output Cable Length Input Power A/C Power Power Conversion General Remote Control Monitoring System Device Protection Calibration Interval Operating Conditions Cooling Particulate Level Other Circuit card module compatible with Vektrex systems Rack mount / benchtop chassis 89mmH x 483mmW x 635mmD (including handles) Optoisolated input, pauses output, selectable polarity Optoisolated input, halts output, selectable polarity Differential drive Single or multiconductor twisted pair 20m Selectable; single and three phase available; 50-60Hz Two-stage: DC-DC converter + analog current regulator 100-base T Ethernet, TCP/IP with SCPI syntax Built-in aquisition system monitors & reports voltage, current, and fault conditions 2nd generation SpikeSafe protection including high-speed over current shutdown, slow start up, leakage detection and other protection algorithms 2 years For indoor use only, 10 to 35C, 70%R.H., <2000m altitude Air cooled Clean lab conditions CE, RoHS Page 5
6 Notes All specifications at 23C+/-5C 1 RMS, 20MHz BW, primary frequency 100kHz or 200kHz 2 Output current that guarantees 3% accuracy at calibration limit 3 With suitable auxilary bulk power supply: Vbulk Compliance Voltage +20V for Buck models, Compliance Voltage/2 for Buck/Boost Models 4 Typical p-p current variation over 1 hour, after warm up at 23C 5 2-wire measurement designed for load monitoring. SpikeSafe Performance Current Sources may be paired with available high-speed DMM s for precise voltage and current measurements 6 Additional power options must be specified. Contact your sales representative or sales@vektrex.com Model Number Guide 6 sales@vektrex.com or visit to get more information and request a quote Page 6
SYSTEM 8800 Model 883 Power Converter
SYSTEM 8800 Model 883 Power Converter With the DANFYSIK SYSTEM 8800 power converter program we are offering our customers a new generation of high performance power converters. The Model 883, which is
DXM 300W-1200W X-RAY GENERATOR MODULE REV. AB
PAGE 1 OF 5 Compact & Lightweight Models from 20kV-160kV, 300W, 600W and 1200W Universal Input, Power Factor Corrected Hot Anode or Hot Cathode X-Ray Tube Capable Standard Digital Interfaces:, Ethernet
LM-80 Integrated Solutions
LM-80 Integrated Solutions Reliable, Energy Efficient, High Capacity Applications: LM-80; LM-79; Reliability Test, Burn In LM-80 Drive Electronics Accurate Reliable Drive Current for 7/24 operation Use
DIFFERENTIAL CURRENT GENERATOR «POCDIF» (AC/DC - 32A - 50V - 12 ranges)
PERFORMANCES 12 ranges of AC current from 16 ma to 128 A peak AC permanent current up to 26 ARMS Nine ranges of DC permanent current from 16 ma to 12 A DC current ± 6mA or ± 10 ma stackable to AC current
High Stability Voltage Source
Bilt System module - BE2100 High Stability Voltage Source Voltage to ±12V, current to ±200mA High Resolution: 21 bits, 6 ½ digits Ultra Low Noise: down to 6µVp-p Clean output noise spectrum with no spike
RF Amplifier Data Sheet. BT02000-AlphaA-100ms 10kHz-3MHz 2kW. Scientific and Industrial Applications
10kHz-3MHz 2kW RF Specifications Type Rated Power P1dB Gain Class AB MOSFET 2000W minimum PEP for input power of 0dBm 1600W minimum Minimum output power at P1dB compression 63dB minimum Scientific and
NI DAQPad -6020E Family Specifications
NI DAQPad -6020E Family Specifications This document lists the I/O terminal summary and specifications for the NI DAQPad-6020E family of devices. This family includes the following devices: NI DAQPad-6020E
RF Amplifier Data Sheet. BT01000-Gamma 5MHz-400MHz 1kW. Scientific and Industrial Applications
RF Specifications Type Class AB MOSFET 5MHz-400MHz 1kW Scientific and Industrial Applications Rated Power P1dB Gain Frequency Gain flatness 1000W minimum PEP for input power of 0dBm 800W minimum Minimum
AIM & THURLBY THANDAR INSTRUMENTS
AIM & THURLBY THANDAR INSTRUMENTS TF960 TF930 PFM3000 High performance 3GHz and 6GHz frequency counters PFM3000-3GHz low-cost handheld frequency counter TF930-3GHz bench/portable universal counter with
VXR D SERIES HIGH RELIABILITY COTS DC-DC CONVERTERS
VXR30-2800D SERIES HIGH RELIABILITY COTS DC-DC CONVERTERS Models Available Input: 9 V to 60 V continuous, 6 V to 100 V transient 30 W, dual outputs of 3.3 V, 5 V, 12 V, 15 V -55 C to 105 C Operation 1.0
Looking For A High Power, Low Profile Power Supply? KEPCO. Has More Than One Way To Help Make Your Decision Easier! AN ISO 9001 COMPANY
Looking For A High Power, Low Profile Power Supply? 146-1977 KEPCO Has More Than One Way To Help Make Your Decision Easier! AN ISO 9001 COMPANY KLP MODEL TABLE MODEL (3) KLP 10-150 KLP 20-120 KLP 36-60
Manual Supplement. This supplement contains information necessary to ensure the accuracy of the above manual.
Manual Title: 5502E Getting Started Supplement Issue: 3 Part Number: 4155211 Issue Date: 9/18 Print Date: November 2012 Page Count: 12 Revision/Date: This supplement contains information necessary to ensure
PEAK OUTPUT CURRENT 1. MAP V 4.7V to 5.8V 8A 11A 0.2% ±1% 1% 4.9V to 5.1V PEAK OUTPUT CURRENT 4 LINE REGULATION
The Bel Power Solutions MAP30/40/42 Series of power supplies combines low cost and universal input in a board-only power solution to meet commercial and industrial requirements. Full international safety,
SC5407A/SC5408A 100 khz to 6 GHz RF Upconverter. Datasheet. Rev SignalCore, Inc.
SC5407A/SC5408A 100 khz to 6 GHz RF Upconverter Datasheet Rev 1.2 2017 SignalCore, Inc. support@signalcore.com P R O D U C T S P E C I F I C A T I O N S Definition of Terms The following terms are used
TOS5300 SERIES Hipot Tester/Hipot Tester with Insulation Resistance Test
A new standard for Hipot & Insulation resistance testing Applied to World-Wide input voltage TOS5301 TOS5300 TOS5302 TOS5300(ACW) TOS5301(ACW/DCW) TOS5302(ACW/IR) New low-cost standard model that provides
This convection-cooled series is designed for use in commercial and industrial environments in temperatures up to 50 C.
RoHS Lead-Solder-Exemption Compliant Automatic 115/230 Input Voltage Selection All Outputs Fully Regulated Remote Sense, Overvoltage Protection and Overtemperature Protection Power Fail Signal Included
Data Sheet SC5317 & SC5318A. 6 GHz to 26.5 GHz RF Downconverter SignalCore, Inc. All Rights Reserved
Data Sheet SC5317 & SC5318A 6 GHz to 26.5 GHz RF Downconverter www.signalcore.com 2018 SignalCore, Inc. All Rights Reserved Definition of Terms 1 Table of Contents 1. Definition of Terms... 2 2. Description...
DATASHEET VXR S SERIES
VXR250-2800S SERIES HIGH RELIABILITY COTS DC-DC CONVERTERS DATASHEET Models Available Input: 11 V to 60 V continuous, 9 V to 80 V transient 250 W, single output of 3.3 V, 5 V, 12 V, 15 V, 28 V -55 C to
5790B/5/AF AC Measurement Standard
/5/AF AC Measurement Standard General Description The /5/AF specifications in Table 1 supersede those published in the Operator and Service Manuals. The specification differences (between the and the /5/AF)
5790A/AF AC Measurement Standard
AC Measurement Standard General Description The 5790A/AF is similar to the standard 5790A AC Measurement Standard except for different performance specifications and added accessories as noted below. The
High Power Programmable DC Power Supplies PVS Series
Data Sheet High Power Programmable DC Power Supplies The PVS10005, PVS60085, and PVS60085MR programmable DC power supplies offer clean output power up to 5.1 kw, excellent regulation, and fast transient
Preliminary Specification
Preliminary Specification CONTENTS 1.1 SCOPE 2 1.2 OPTICAL SPECIFICATION 2 1.3 BEAM DELIVERY FIBER SPECIFICATION 3 1.4 ALIGNMENT LASER 3 1.5 POWER DISTRIBUTION 3 1.6 WATER COOLING REQUIREMENTS 4 1.7 CONTROL
I PM. Current Transducer ITZ 5000-SB FLEX ULTRASTAB = 5000 A
urrent Transducer ITZ 5000-SB FLEX ULTRASTAB I PM = 5000 A For ultra-high precision measurement of current: D, A, pulsed..., with galvanic separation between primary and secondary. Separate magnetic head
2017 Advanced Energy Industries, Inc. HITEK POWER MV2000 SERIES MEDIUM-VOLTAGE HIGH-CURRENT POWER SUPPLIES
2017 Advanced Energy Industries, Inc. HITEK POWER MV2000 SERIES MEDIUM-VOLTAGE HIGH-CURRENT POWER SUPPLIES Medium-voltage rack-mount power supplies Page 2 The MV2000 series high-performance, medium output
NI 6013/6014 Family Specifications
NI 6013/6014 Family Specifications This document lists the I/O terminal summary and specifications for the NI 6013/6014 family of devices. This family includes the following devices: NI PCI-6013 NI PCI-6014
Specifications. PCI Bus. Analog Input Input Characteristics
Specifications A This appendix lists the specifications of the NI 6034E/6035E/6036E. These specifications are typical at 25 C unless otherwise noted. The first section provides the specifications for the
The MPB150 product line is approved to the latest international regulatory standards, and displays the CE Mark.
The MPB150 Series incorporates patented high efficiency circuitry, high power density and active Power Factor Correction (PFC) to meet the requirements of networking and data communications systems, as
DIFFERENTIAL CURRENT GENERATOR «POCDIF» (AC/DC - 32A - 50V - 12 ranges)
PERFORMANCES 12 ranges of AC current from 16 ma to 128 A peak AC permanent current up to 26 ARMS Nine ranges of DC permanent current from 16 ma to 12 A DC current ± 6mA or ± 10 ma stackable to AC current
LDC Channels of Laser Diode Control. 16-Channel Laser Diode Controller. Product Features
Product Features 16 independent, isolated channels for laser and TEC control Wide variety of laser controller modules (current and temperature) with up to 3A available per channel Dual channel laser current
VXR S SERIES 1.0 DESCRIPTION 1.1 FEATURES 1.2 COMPLIANCE 1.3 PACKAGING 1.4 SIMILAR PRODUCTS AND ACCESSORIES
VXR15-2800S SERIES HIGH RELIABILITY COTS DC-DC CONVERTERS Models Available Input: 9 V to 60 V continuous, 6 V to 100 V transient 15 W, single output of 3.3 V, 5 V, 12 V, 15 V -55 C to 105 C Operation 1.0
Advanced Test Equipment Rentals ATEC (2832)
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) Elgar TerraSAS 1kW-1MW Programmable Solar Array Simulator Simulate dynamic irradiance and temperature ranging from a
VXR D SERIES 1.0 DESCRIPTION 1.1 FEATURES 1.2 COMPLIANCE 1.3 PACKAGING 1.4 SIMILAR PRODUCTS AND ACCESSORIES
VXR15-2800D SERIES HIGH RELIABILITY COTS DC-DC CONVERTERS Models Available Input: 9 V to 60 V continuous, 6 V to 100 V transient 15 W, dual outputs of 3.3 V, 5 V, 12 V, 15 V -55 C to 105 C Operation 1.0
NI 6143 Specifications
NI 6143 Specifications This document lists the I/O terminal summary and specifications for the NI PCI/PXI-6143. For the most current edition of this document, refer to ni.com/manuals. Refer to the DAQ
AC/DC Power Supply Series APPLICATION NOTE
ZMS100 AC/DC Power Supply Series APPLICATION NOTE ZMS100 Application Notes Issue 3 Document Number 260160 Page 1 of 15 Contents Contents... 2 1. INPUT... 3 AC INPUT LINE REQUIREMENTS... 3 2. DC OUTPUT...
SPECIFICATIONS. Tunable Single-Frequency Laser Box. DL-BF12-CLSwwwB-Sxxxx-yy-zz
DENSELIGHT SEMICONDUCTORS PTE. LTD. 6 Changi North St. 2, S498831 SINGAPORE Tel: (65) 64154488 Fax: (65) 64157988 www.denselight.com SPECIFICATIONS Tunable Single-Frequency Laser Box DenseLight Semiconductors
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK Synthesized Signal Generator, 10
WORLD LEADING PRODUCTS FOR LASER SCIENTISTS AND ENGINEERS
60 Amp High Power Laser Diode Driver, CW and QCW Modes 60 Amp (CW), 12 Volt High Power Laser Diode Driver Compact: 105 x 81 x 200mm RS-232 or USB, LabView Drivers Integrated QCW Pulse Generator: Pulse
Manual Supplement. This supplement contains information necessary to ensure the accuracy of the above manual.
Manual Title: 550A Getting Started Supplement Issue: Part Number: 415509 Issue Date: 9/18 Print Date: November 01 Page Count: 19 Revision/Date: This supplement contains information necessary to ensure
2520 Pulsed Laser Diode Test System
Complete pulse test of laser diode bars and chips with dual photocurrent measurement channels 0 Pulsed Laser Diode Test System Simplifies laser diode L-I-V testing prior to packaging or active temperature
AUM FAMILY Programmable DC Power Supplies
AUM FAMILY Programmable DC Power Supplies 500W O/P Power 1U Half-Rack Front Panel Encoder & Tactile Switch Inputs 4-Digit Displays for V & I RS-485 & CAN Interface Standard Models IEEE488.2 or LAN, USB
Agilent N3300 Series DC Electronic Loads
Agilent N3300 Series DC Electronic Loads Data Sheet Increase your manufacturing test throughput with fast electronic loads Increase test system throughput Lower cost of ownership Decrease system development
24 VDC, 1000 Watt/ 48 VDC, 2000 Watt Rectifier Installation / Operation Manual
Centurion II Power System 24 VDC, 1000 Watt/ 48 VDC, 2000 Watt Rectifier Installation / Operation Manual Model: C2R-2000 Newmar 2911 W. Garry Ave. Santa Ana, CA 92704 Tel: (714) 751-0488 Fax: (714) 957-1621
Agilent N8700 Series System DC Power Supplies
Agilent N8700 Series System DC Power Supplies Models: N8731A-42A (3.3 kw), N8754A-62A (5 kw) Data Sheet 21 Models: 3300 W and 5000 W output power Up to 600 V and up to 400 A Small, high density 2 U package
DC Current Source AC and DC Current Source
AC and and Source and sink (programmable load) 100fA to 100mA 10 14 W output impedance ensures stable current sourcing into variable loads 65000-point source memory allows executing comprehensive test
8588A Reference Multimeter
8588A Reference Multimeter Product Specifications March 2019 Rev. A 2019 Fluke Corporation. All rights reserved. Specifications are subject to change without notice. All product names are trademarks of
by permanent load resistance, autoranging and a low weight. PFC A highly effective power factor corrector Integrated measurement
High-performance power supplies TOE 8871 1000 W TOE 8872 1500 W TOE 8872-40 Special features Autoranging Active PFC High rise and fall rates High endurance, even under extreme load conditions Best EMC
DC PRECISION "HIGH CURRENT" SOURCES / RANGE EXTENDERS
6623A-PCS SERIES DC PRECISION "HIGH CURRENT" SOURCES / RANGE EXTENDERS World s First MODULAR Series of DC Precision High Current Sources with Leading Uncertainties & Electronic Polarity Switching Guildline
NI PXIe-5601 Specifications
NI PXIe-5601 Specifications RF Downconverter This document lists specifications for the NI PXIe-5601 RF downconverter (NI 5601). Use the NI 5601 with the NI PXIe-5622 IF digitizer and the NI PXI-5652 RF
Input Characteristics. Measurement Range. SPECIFICATIONS NI PXIe-4357
SPECIFICATIONS NI PXIe-4357 This document lists specifications for the NI PXIe-4357 module. These specifications are typical for the range of 0 C to 55 C unless otherwise stated. The system must be allowed
Series OLH10KD 10kW HIGH VOLTAGE POWER SUPPLIES
Series OLH10KD FEATURES 10kW of output power Wide dynamic range with dual supply configuration Output voltages from 60kV to 500kV for high range Output voltages from 6kV to 10kV for low range Robust IGBT
LAB-AUTO AUTORANGING DC POWER SUPPLY
ELECTRONIC TEST & POWER SYSTEMS LAB-AUTO AUTORANGING DC POWER SUPPLY POSITIVE PROBLEM SOLVING The LAB-AUTO's autoranging output allows for many more voltage/current combinations than a traditional DC source.
Minimizing Current Source-Induced Errors in LM-85 Measurements
Minimizing Current Source-Induced Errors in LM-85 Measurements Jeff Hulett, CTO, Vektrex, LM-80 Working Group Chair jhulett@vektrex.com www.vektrex.com - slide 1 1 Abstract. LM-85 describes three methods
CLEARCLOCK POWER OPTIMIZED 0.12ps 5x7mm XO
FEATURES APPLICATIONS 0.125ps typ jitter (150fs MAX f > 200MHz, 25 C) Highest in-class frequency range from 50 to 2100MHz Excellent spurious suppresion 70mA MAX IDD (, any VDD) Lowest in-class power consumption
HMC-T2240. Synthesized Signal Generator, 10 MHz to 40 GHz
Synthesized Signal Generator, 10 MHz to 40 GHz , 10 MHz to 40 GHz Wide Range, 10 MHz to 40 GHz Signal Generator! The is an easy to implement test equipment solution designed to fulfill your signal generation
SC5307A/SC5308A 100 khz to 6 GHz RF Downconverter. Datasheet SignalCore, Inc.
SC5307A/SC5308A 100 khz to 6 GHz RF Downconverter Datasheet 2017 SignalCore, Inc. support@signalcore.com P RODUCT S PECIFICATIONS Definition of Terms The following terms are used throughout this datasheet
LOW POWER TCXO & VCTCXO OSCILLATOR
PETERMANN-TECHNIK GmbH LOW POWER TCXO & VCTCXO OSCILLATOR SERIES TCVCTO-2 10.0 40.0 MHz FEATURES + 100% pin-to-pin drop-in replacement to quartz and MEMS based VCTCXO + Ultra Performance Oscillator for
SMT20C SERIES. Single Output TÜV. SMT20C Series 20 A DC-DC Converter C Class Non-Isolated
SMT20C SERIES Single Output Wide output voltage trim (0.9 Vdc to 5.0 Vdc, 20 A max.) Power good output signal (open collector) Input undervoltage lockout Current sink capability for termination applications
Linear Power Supplies Data Sheet
Features Description Power-One produces the industry s broadest selection of Linear power supplies with output voltages from 5 volts through 250 volts. Rugged technology and proven design merge to create
SIL20C SERIES. Single Output. SIL20C Series 20 A DC-DC Converter C Class Non-Isolated
SIL20C SERIES Single Output Wide output voltage trim (0.9 Vdc to 5.0 Vdc, 20 A max.) Power good output signal (open collector) Input undervoltage lockout Current sink capability for termination applications
Three-phase AC input. Suitable for 3U or 5U height mounting. Single-wire current share or Droop current share
Three-phase C input Suitable for 3U or 5U height mounting Single-wire current share or Droop current share Remote voltage adjust and current monitoring Overtemperature, overload, and overvoltage protection
INPUT VOLTAGE STARTING MINIMUM NORMAL MAXIMUM MAXIMUM INPUT RANGE VOLTAFE VOLTAGE VOLTAGE VOLTAGE CURRENT
RK-23/048RD100-7200 SPECIFICATION SCOPE This functional specification defines the performance characteristics of the switching mode regulated power supply, and also defines world wide safety requirements
Agilent N8973A, N8974A, N8975A NFA Series Noise Figure Analyzers. Data Sheet
Agilent N8973A, N8974A, N8975A NFA Series Noise Figure Analyzers Data Sheet Specifications Specifications are only valid for the stated operating frequency, and apply over 0 C to +55 C unless otherwise
8558A 8 1/2 Digit Multimeter
8558A 8 1/2 Digit Multimeter Product Specifications March 2019 Rev. A 2019 Fluke Corporation. All rights reserved. Specifications are subject to change without notice. All product names are trademarks
SFX Form Factor SST-SX650-G SST-SX500-G. The standard SFX power supply benchmark
SFX Form Factor SST-SX650-G SST-SX500-G The standard SFX power supply benchmark Support standard SFX form factor Silent running 92mm fan with 18 dba minimum All Japanese capacitors High efficiency with
NI PXI-4461 Specifications
NI PXI-446 Specifications Analog Input Input Characteristics This document lists specifications for the NI PXI-446 Dynamic Signal Acquisition (DSA) device. These specifications are typical at 5 C unless
Chapter 6 Specifications
RIGOL This chapter lists the technical specifications and general specifications of the RF signal generator. The technical specifications are valid when the instrument is within the calibration period,
Product Specification sheet
INPUT MINIMUM RATED MAXIMUM Input Voltage 90V AC 100 240V AC 264V AC Input Frequency 47 Hz 50 / 60 Hz 63 Hz Input Current * 350mA Inrush Current **
DATA SHEET A Multimeter 5.5 Digit Dual Display, Benchtop DMM
DATA SHEET 34450A Multimeter 5.5 Digit Dual Display, Benchtop DMM Features Fast reading speed of up to 190 readings/sec 0.015% DCV accuracy Multiple connectivity options USB 2.0, Serial Interface (RS-232)
RF Amplifier Data Sheet. BT00100-AlphaA-CW 10kHz-1MHz 100W. Scientific and Industrial Applications
10kHz-1MHz 100W Scientific and Industrial Applications The BT-AlphaA-CW series is a range of class AB RF power amplifiers covering the 10kHz to 1MHz frequency range. Rugged, solid-state design - high reliability
Metal Case Power Supplies
, 120 480 Watt Features Compact U-bracket and enclosed power supplies Screw terminal block Very high efficiency up to 93 % No internal fan for 120 W & 240 W models. Universal input 90 264 VAC Adjustable
0.5% Accuracy Overload Fuse protection Test Clips/Direct insert jack for easy measurement TES Capacitance Meter
TES-1500 Capacitance 0.5% Accuracy Overload Fuse protection Test Clips/Direct insert jack for easy measurement TES-2620 TRMS Multimeter TES-2700 TES-2712 LCR Multimeter 3-3/4 Digital LCD with bar-graph
Single-output models feature wide-range output adjustability to meet a wide variety of standard and user-specific output voltage requirements.
Bel Power Solutions MAP55 Series of power supplies provides reliable, tightly-regulated DC power for commercial and industrial systems. Wide-range AC input and full international safety, EMI, and ESD compliance
500mA Ultra Low Dropout Voltage Regulator With Inhibit Function
500mA Ultra Low Dropout Voltage Regulator With Inhibit Function DESCRIPTION The TS2938 series of fixed-voltage monolithic micropower voltage regulators is designed for a wide range of applications. This
RTD), LM335 Voltage, or AD592 current. c. Constant TE Current (8350 only)
Photonics and Instrumentation 309 Model 8000 Modular Controller Comprehensive laser diode protection features Large graphics display, allowing full four-channel visibility Complete laser diode characterization
WORLD LEADING PRODUCTS FOR LASER SCIENTISTS AND ENGINEERS
120 Amp Laser Diode Bar and Array Driver; High Power CW & QCW Current Source 120 Amp Current Source Optimized for Laser Diode Bars and Arrays User Configurable Soft-Start Current Ramp and Enhanced High
1586A Super-DAQ Precision Temperature Scanner. The most accurate and flexible temperature data acquisition system on the market. Fluke-Direct.
1586A Super-DAQ Precision Scanner The most accurate and flexible temperature data acquisition system on the market info@ 1586A Super-DAQ Precision Scanner The 1586A Super-DAQ is the most accurate and flexible
Arbitrary/Function Generator AFG1000 Series Datasheet
Arbitrary/Function Generator AFG1000 Series Datasheet 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com Compatible with TekSmartLab
Contents. Software Requirements
CALIBRATION PROCEDURE NI PXIe-4154 This document contains information for calibrating the NI PXIe-4154 Battery Simulator. For more information about calibration, visit ni.com/calibration. Contents Software
Easy-to-Use RF Device & User-Friendly Windows Software
itest+ PicoTime-1U Spec November 30, 2015 Low Cost/Profile High Resolution Frequency Stability Measurement Test Set Pico Second Resolution Instrument Easy-to-Use RF Device & User-Friendly Windows Software
Programmable Linear DC Power Supply
DP800 Series Programmable Linear DC Power Supply /: 3 outputs, 30V/3A 30V/3A, 5V/3A, total power up to 195W /: 3 outputs, 8V/5A 30V/2A, -30V/2A, total power up to 160W A/: 2 outputs, 60V/1A 8V/10A, with
NI PXIe-5630 Specifications
NI PXIe-5630 Specifications RF Vector Network Analyzer This document lists specifications for the NI PXIe-5630 RF vector network analyzer (NI 5630). Specifications are warranted under the following conditions:
Features. Power Module. 2 Amp Single Output RBB RBB DC/DC Converter
Features Power Module 1W buck/boost converter with up to 4A output Input voltage can be higher, lower or same as output voltage >9% efficiency from 1mA 3mA load 7µA standby power consumption Low profile,
Modular Controller. Key Features. Model P hotonics. Comprehensive laser diode protection features. Advanced 16-bit control technology
16 P hotonics LASER DIODE TESTING FIBER OPTIC TEST Key Features Comprehensive laser diode protection features Advanced 16-bit control technology Complete laser diode characterization (L,V,I) using 8500
DEVICE SPECIFICATIONS Phase Matrix PXI GHz PXI Vector Signal Analyzer
DEVICE SPECIFICATIONS Phase Matrix PXI-470 26.5 GHz PXI Vector Signal Analyzer This document lists specifications for the Phase Matrix PXI-470 26.5 GHz vector signal analyzer (VSA). The PXI-470 26.5 GHz
HITEK POWER XR KW X-RAY POWER SUPPLY MODULE
HITEK POWER XR1000 1 KW X-RAY POWER SUPPLY MODULE Component power supply for industrial x-ray systems, elemental analysis equipment, x-ray diffraction spectrometers, and materials process monitoring applications
Fluke 5820A Oscilloscope Calibrator Specifications
Fluke 5820A Oscilloscope Calibrator Specifications Voltage Function Volt Function DC Signal Square Wave Signal 1 Load into 50Ω into 1 MΩ into 50Ω into 1 MΩ Amplitude Range 0V to ±6.6V 0V to ±130V ±1 mv
RF Amplifier Data Sheet. BT00500-AlphaSA-CW 0.5MHz-150MHz 500W. Scientific and Industrial Applications
0.5MHz-150MHz 500W Scientific and Industrial Applications The BT-AlphaSA-CW series is a range of class AB RF power amplifiers covering the 0.5MHz to 150MHz frequency range. Rugged, solid-state design -
HITEK POWER OLH10K SERIES
10KW HIGH VOLTAGE POWER SUPPLIES The HiTek Power OLH10K Series is a range of high reliability single output high voltage power supplies designed to meet the rigorous requirements of ion and electron beam
SC5306B 1 MHz to 3.9 GHz RF Downconverter Core Module. Datasheet SignalCore, Inc.
SC5306B 1 MHz to 3.9 GHz RF Downconverter Core Module Datasheet 2015 SignalCore, Inc. support@signalcore.com SC5306B S PECIFICATIONS Definition of Terms The following terms are used throughout this datasheet
9 Specifications. Specifications NOMINAL CHARACTERISTICS
9 Specifications Specifications NOMINAL CHARACTERISTICS WARRANTED CHARACTERISTICS Nominal characteristics describe parameters and attributes that are guaranteed by design, but do not have associated tolerances.
Power Supply Selector Guide
Tektronix and Keithley Power Supply Selection Guide Brand Model Channel Power Programmable Tektronix PWS2185 1 90 W 18 V 5 A N/A Tektronix PWS2323 1 96 W 32 V 3 A N/A Tektronix PWS2326 1 192 W 32 V 6 A
Model Quality in Test and Measurement Since 1949 OUTSTANDING PERFORMANCE DESCRIPTION APPLICATIONS ADDITIONAL FEATURES
Quality in Test and Measurement Since 1949 DC Source/Calibrators, Tunable Electronic Filters, Wideband Power Amplifiers Precision Phasemeters, Distortion Analyzers Function Generators, RC Oscillators Model
C B. Models. Models 2MOPP
AC/DC Medical Power Supplies High power density 3" x 5" open frame medical power supply 450 Watt with forced air cooling 320 Watt convection cooled without derating up to 50 C Medical certification to
DC Current Source AC and DC Current Source
AC and 6220 and Source and sink (programmable load) 100fA to 100mA 10 14 Ω output impedance ensures stable current sourcing into variable loads 65000-point source memory allows executing comprehensive
VX-703 Data Sheet VX-703. Voltage Controlled Crystal Oscillator Previous Vectron Model V-Type. Description. Features. Applications.
X-703 Data Sheet oltage Controlled Crystal Oscillator Previous ectron Model -Type X-703 Description ectron s X-703 oltage Controlled Crystal Oscillator (CXO) is a quartz stabilized square wave generator
LM2925 Low Dropout Regulator with Delayed Reset
LM2925 Low Dropout Regulator with Delayed Reset General Description The LM2925 features a low dropout, high current regulator. Also included on-chip is a reset function with an externally set delay time.
Voltage Setpoint Accuracy +/-2% max Input Voltage Range 2:1 3:1 4:1 Input Range. +/-0.5% max GENERAL SPECIFICATIONS
FEATURES W DIL PACKAGE INDUSTRY STANDARD PACKAGE 9-8V,8-6V,6-7V,9-7V,8-V, 9-6V,8-7V WIDE RANGE NO EXTERNAL COMPONENTS REQUIRED REGULATED 00% BURN IN HIGH EFFICIENCY UL 9V-0 PACKAGE MATERIAL CUSTOM SOLUTIONS
Elgar SmartWave Series VA V A. High Performance AC/DC Power Source. and Boeing standards
Elgar SmartWave Series High Performance AC/DC Power Source and Boeing standards 1750 22200 VA 156 312 V 6.5 192 A 208 230 400 230 The Elgar SmartWave (SW) Series of AC power sources offers powerful waveform
Specifications for the NI PXI/PCI-6552/6551
Specifications for the NI PXI/PCI-6552/6551 100/50 MHz Digital Waveform Generator/Analyzer Channel Characteristics These specifications are valid for the operating temperature range, unless otherwise noted.
S200 I/O System Units
S200 I/O System Units S200 I/O is a range of cost effective I/O units which are bus compatible with S200L I/O and can be mixed with them in any order on the same DIN rail. The S200 I/O System features