Amphenol Cable. Features Allows for mass termination Up to 64 conductors

Size: px

Start display at page:

Download "Amphenol Cable. Features Allows for mass termination Up to 64 conductors"

Elwin Caldwell
5 years ago
Views:

1 G80.7mm Economical Flat Ribbon 94V-0 A G80 X X XX X FLAT RIBBON CABLE.7mm Up to 64 conductors VARIATION CODE Blank: Standard PACAGING LENGTH NUMBER OF CONDUCTORS : 500 Feet 09: 9 Position : 400 Feet 4: 4 Position 3: 50 Feet 5: 5 Position 4: 00 Feet 6: 6 Position 0: 0 Position WIRE SIZE 4: 4 Position : 6 AWG 5: 5 Position : 8 AWG 6: 6 Position 3: 30 AWG 34: 34 Position 36: 36 Position 37: 37 Position 40: 40 Position 50: 50 Position 60: 60 Position 64: 64 Position PNS-800 Rev. A AMTA Typical Flat Ribbon 3C.7mm Colour Coded Grade A Ribbon Ideal for digital and analog signal applications. Designed for mass termination, the colour coding allows for easy circuit tracing and routing. 00 ft 94V-0 A Impedance 05Ω Capacitance 3 pf/ft nom. Crosstalk (0 sample, 5ns rise time) NE= 4.t%, FE = 4.3% Propagation delay.5ns/ft nom. Up to 64 conductors Alternate Colour Coded Stranded Core s (mm) Wire Gauge Part Number (AWG) System: XX XX XX No. of s Dimensions XX A B XX XX XX XX XX For High Flex Life Ribbon use Spectra-Flex TM Series 9-8.7mm pitch 8AWG Gray only XX For Halogen-free Ribbon use Series Gray only X T-

2 Twist n Flat Twisted Pair Ribbon Combines the time and cost savings of mass termination with the electrical performance of twisted pairs Series Loose Pair Ribbon 50 ft 30AWG (7/38 strand) 0.75A 50V Impedance 0Ω 95Ω 0Ω 3 Capacitance 3pf/ft 8pf/ft 3pf/ft 3 Attenuation 5MHz 4dB/00 0MHz 5dB/00 Propagation delay.5ns/ft DC Resistance 06Ω/000 Measured Singled-Ended with one conductor of each pair commoned to one Bus (SCSI mode) 3 Loose pair configuration allows for air flow Double sided lamination acts as strain relief Series Solid Core Ribbon 50 ft 30AWG (solid) 0.75A 50V Impedance 90Ω 5Ω Capacitance MHz MHz Propagation delay.59ns/ft DC Resistance Delay Skew 06Ω/ ns/ft max. UL/CSA certified Recommended for LVD SCSI high frequency Significant crosstalk isolation Fully laminated for tighter impedance control Series Stranded Core Planar 50 ft 30AWG (7/38 strand) 0.75A 50V Impedance 80Ω 0Ω Capacitance MHz MHz Propagation delay.59ns/ft DC Resistance Delay Skew 95Ω/ ns/ft max. UL/CSA certified Recommended for LVD SCSI high frequency Significant crosstalk isolation Fully laminated for tighter impedance control Typical Loose Pair Stranded Core TnF Planar Typical d Pair Solid Core Planar (figure shown above) Type , same as shown above except with stranded cores (7/38AWG) T-4

7%, FE =.45% Propagation delay.6ns/ft nom. Up to 3 pairs (64 conductors) Drain wire 00 ft 8AWG (7/38 strand) Extruded black PVC 80 C ± 457.mm ± 50.

3 Twist n Flat.7mm Twisted Pair Ribbon Combines the time and cost savings of mass termination with the electrical performance of twisted pairs. 3 Series Ribbon 5 Series ed 59 Series Round 00 ft 80 C ± 457.mm ± 50.8mm A Impedance 00Ω Capacitance 5 pf/ft nom. Crosstalk (0 sample, 5ns rise time) Unbalanced NE= 4%, FE = 3.5% Balanced NE =.7%, FE =.45% Propagation delay.6ns/ft nom. Up to 3 pairs (64 conductors) Drain wire 00 ft 8AWG (7/38 strand) Extruded black PVC 80 C ± 457.mm ± 50.8mm A Impedance 75Ω Capacitance pf/ft nom at MHz Crosstalk (0 sample, 5ns rise time) Unbalanced NE= 4%, FE = 3.5% Balanced NE =.7%, FE =.45% Propagation delay.6ns/ft nom. EMI/RFI ed 00 ft Foil with 85% covered braid -0 C to 05 C ± 444.5mm ± 63.5mm A Impedance 70Ω Capacitance 5 pf/ft nom at MHz Crosstalk (0 sample, 5ns rise time) Balanced NE =.3%, FE =.3% Propagation delay.65ns/ft nom. Up to 3 pairs (64 conductors) Meets FFC regulations Pairs C B Pairs Outer Ø Twist N Flat configuration the same as 3 Series Alternate Twist N Flat Halogen-free (Flame Retardant) XX 65~50 C Halogen-free 3-8-0XX Halogen-free Loose Pair XX* Alternate ed Twist N Flat No, No Drain XX Copper Mesh XX Alternate Twist N Flat Round No Braid, ed XX No Braid, No XX Loose Pair ed XX* Halogen-free Loose Pair ed XX* 65~50 C Halogen-free XX* T-3

65 Series Skewclear for LVDS Channel Link TM Available in in 4 different gauges, this cable was designed to provide GREATER BANDWIDTH for Channel Link Low Differential Signalling (LVDS).

4 65 Series Skewclear for LVDS Channel Link TM Available in in 4 different gauges, this cable was designed to provide GREATER BANDWIDTH for Channel Link Low Differential Signalling (LVDS). These parallel pair conductors are avaialble in 30; 8; 6 and 4AWG. This enables GIGABIT interconnections in telecommunication and data communication applications. Length Supplied No Standard Length Signal wires Solid silver plated copper Drain wire Solid tinned copper Polyolefin Pair ester Overall Aluminized polyester Overall Braid tinned copper Up to 50 Pairs High cross-talk isolation Consistent Skew Control Stable Impedance 65-XXXX-XXX Impedance 00Ω ±5 Ω Capacitance 30AWG 8/6/4AWG 5 pf/m 43 pf/m nom Skew (within pair) 98.4ps/0M Skew 350 ps/0m Crosstalk 60dB min MHz to GHz Attenuation 30AWG 693MHz 8AWG 40MHz 693MHz 6AWG 40MHz 693MHz 40MHz 693MHz Applications Flat Panel Displays Monitor Links SCI Processor Interconnection Printer Engine Links Digital Copiers System Clusters Multimedia Peripheral Links Switches Add/Drop Multiplexers Hubs Box to Box, Rack to Rack WIRE GAUGE CONDUCTOR CODE 3099: 30AWG see table below 899: 8AWG 699: 6AWG 499: 4AWG No of pairs Code AWG OD Code AWG OD Code AWG OD Code AWG OD Series Spectr-Coax TM Coax Planar Coax planar cable with high speed signal capability that can be mass terminated. It is available in 93; 75 and 50 Ohms.54mm 00 ft Centre 93 & 75Ω 30AWG copper 50Ω 8AWG copper Dielectric 93 & 75Ω Foamed Polypropylene 50Ω Solid Polypropylene Drain wire 8AWG tinned copper Aluminum Poly Foil 93Ω Red PVC 75Ω Gray PVC 50Ω High Signal Speed Controlled Impedance Up to 33 s Mass Termination Impedance Capacitance 93Ω 75Ω 50Ω Crosstalk 843--XXXX-0XX 93Ω ± 5Ω 75Ω ± 4Ω 50Ω ± 3Ω 4 ± pf/ft 7. ± pf/ft 3 ± pf/ft <% NE and FE unbalanced, 0 foot cable Rise time 3.5 or 7 nanosec CABLE TYPE CONDUCTOR CODE 300: 93Ω 0: Position 300: 75Ω : 803: 50Ω 33: 33 Position (see table) A Dim B Propagation delay 93 & 75Ω.35 nanosec/ft 50 Ω.54 nanosec/ft Propagation velocity 93 & 75Ω 78% 50 Ω 66% Risetime degradation 93 & 75Ω <350 picosec/0ft 50Ω <400 picosec/0ft Attenuation /00ft. nom. 00MHz 93Ω 6dB 75Ω 7.3dB 50Ω db T-

Specialised Flat Ribbon Qwik Strip 33-803 Ground Plane Ribbon 00 ft Copper Mesh Ground Plane Gray PVC 94V-0 05 C A Impedance 65Ω Capacitance 9pf/ft Propagation delay.

5% Measured from to Ground Easy cable preparation Cost saving termination labour Cosistant peel back Controlled crosstalk and EMI/RFI ed 5 Series ed Ribbon 00 ft 30AWG (solid) Gray PVC Drain Wire

5 Specialised Flat Ribbon Qwik Strip Ground Plane Ribbon 00 ft Copper Mesh Ground Plane Gray PVC 94V-0 05 C A Impedance 65Ω Capacitance 9pf/ft Propagation delay.65ns/ft Crosstalk (0 sample, 5ns rise time) NE.% FE 3.5% Measured from to Ground Easy cable preparation Cost saving termination labour Cosistant peel back Controlled crosstalk and EMI/RFI ed 5 Series ed Ribbon 00 ft 30AWG (solid) Gray PVC Drain Wire 30AWG (solid) -0~05 C 0.8A 50V Impedance 55Ω Capacitance MHz Inductance MHz Propagation delay.55ns/ft Unbalanced Crosstalk (0ft, 5ns rise time) NE 0.8% FE.8% Measured ground-signal-ground with grounded Rugged flexible protection Excellent electrical performance Round n Flat TM 59 Ribbon in Round 00 ft Braid Liner between and Braid Paper -0~05 C 0.75A Impedance 75Ω Capacitance MHz Inductance MHz Propagation delay.6ns/ft Measured ground-signal-ground with grounded Round cable that mass terminates Highly flexible Helps meet FCC requirements Cond. A B Cond. C Cond. A B For 0.635mm 30 AWG Ground Plane Ribbon Use Spectra-GP XX Available in: 0; 6; 0; 6; 34; 40; 50; 60; 64; 80 and 00 positions. ( characteristics vary from this specification sheet) For.7mm 8 AWG ed and ed Ribbon Use Series XXX Available in: 9; 0; 4; 5; 6; 0; 4; 5; 6; 34; 37; 40; 50; 60 and 64 positions. ( characteristics vary from this specification sheet) Alternate Round n Flat No Braid, Foil only XX No Braid, No Foil XX For 0.635mm pitch 30AWG Braid and Foil XX No Braid, Foil only XX No Braid, No Foil XX Available in: 0; 6; 0; 6; 34; 40; 50; 60; 64; 68 and 80 positions T-5

Microwave Coax Cable

Microwave Coax Cable Cable LINCOS microwave coaxial cable basic construction is shown below : Ø 1. Inner Conductor : Solid or Strand Sliver Plated Copper Ø 2. Insulation : Wrapped Low Density PTFE Ø 3. Outer Conductor : Sliver