HLG-120H-12 HLG-120H-15 HLG-120H-20 HLG-120H-24 HLG-120H-30 HLG-120H-36 HLG-120H-42 HLG-120H-48 36V 18 ~ 36V 10A 8A 6A 5A 4A 3.4A 2.9A 2.

Size: px

Start display at page:

Download "HLG-120H-12 HLG-120H-15 HLG-120H-20 HLG-120H-24 HLG-120H-30 HLG-120H-36 HLG-120H-42 HLG-120H-48 36V 18 ~ 36V 10A 8A 6A 5A 4A 3.4A 2.9A 2."

Pierce Shaw
5 years ago
Views:

120W Single Output Switching ower Supply I65 I67 HLG-120H series SECIFICATION MODEL OUTUT INUT ROTECTION ENVIRONMENT SAFETY & EMC OTHERS NOTE DC VOLTAGE CONSTANT CURRENT REGION Note.

1 120W Single Output Switching ower Supply I65 I67 HLG-120H series SECIFICATION MODEL OUTUT INUT ROTECTION ENVIRONMENT SAFETY & EMC OTHERS NOTE DC VOLTAGE CONSTANT CURRENT REGION Note.4 6 ~12V RATED CURRENT RATED OWER RILE & NOISE (max.) Note.2 150mVp-p VOLTAGE ADJ. RANGE Note ~ 13.5V CURRENT ADJ. RANGE VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION SETU, RISE TIME HOLD U TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE OWER FACTOR EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT( Typ.) LEAKAGE CURRENT OVER CURRENT SHORT CIRCUIT OVER VOLTAGE OVER TEMERATURE WORKING TEM. WORKING HUMIDITY SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE EMS IMMUNITY MTBF Note.8 Note.5 STORAGE TEM., HUMIDITY TEM. COEFFICIENT VIBRATION HLG-120H-12 HLG-120H-15 HLG-120H-20 HLG-120H-24 HLG-120H-30 HLG-120H-36 HLG-120H-42 HLG-120H-48 12V Can be adjusted by internal potential meter or through output cable 5 ~ 10A 2.5% 2500ms, 50ms at full load 230VAC / 115VAC ; B type 2500ms, 200ms at 95% load 230VAC / 115VAC 12ms at full load 230VAC / 115VAC 90 ~ 305VAC 127 ~ 431VDC 47 ~ 63Hz 15V 4 ~ 8A 2.0% F 0.95/230VAC F 0.98/115VAC at full load and rated output voltage F 0.9 at 50 ~ 100% load 92% 92% 93% 93% 93% 93% 93% 93.5% 93.5% 1.4A / 115VAC 0.6A / 230VAC 0.55A / 277VAC COLD START 75A/230VAC <0.75mA / 277VAC 7.5 ~ 15V 95 ~ 108% Note.4 rotection type : Constant current limiting, recovers automatically after fault condition is removed Constant current limiting, recovers automatically after fault condition is removed 14 ~ 17V 18 ~ 21V 23 ~ 27V 28 ~ 34V 34 ~ 38V 41 ~ 46V 47 ~ 53V 54 ~ 60V 59 ~ 65V (RTH2) rotection type : Shut down o/p voltage, recovers automatically after temperature goes down -40 ~ full load ; 60% load (Refer to derating curve) 20 ~ 95% RH non-condensing -40 ~ +80, 10 ~ 95% RH 0.03%/ (0 ~ 50 ) 3 ~ 6A 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes Note.7 UL8750, EN , EN independent I65 or I67 approved ; Design refer to UL , TUV EN I/-O/:3.75KVAC I/-FG:1.88KVAC O/-FG:0.5KVAC I/-O/, I/-FG, O/-FG:100M Ohms / 500VDC / 25 / 70% RH EMI CONDUCTION & RADIATION Compliance to EN55015, EN55022 (CISR22) Class B HARMONIC CURRENT Compliance to EN Class C ( 50% load) ; EN V 10 ~ 20V 1.0% 192.2Khrs min. MIL-HDBK-217F (25 ) 24V 12 ~ 24V 2.5 ~ 5A 1.0% DIMENSION 220*68*38.8mm (L*W*H) ACKING 1.12Kg; 12pcs/14.4Kg/0.76CUFT 2 ~ 4A 1.0% 1.7 ~ 3.4A 1.0% 1.4 ~ 2.9A 1.2 ~ 2.5A 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 2.0% 1.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 30V 15 ~ 30V 36V 18 ~ 36V 10A 8A 6A 5A 4A 3.4A 2.9A 2.5A 1.0% 48V 24 ~ 48V 120W 120W 120W 120W 120W 122.4W 121.8W 120W 150mVp-p 13.5 ~ 17V 150mVp-p 17 ~ 22V 150mVp-p 22 ~ 27V 200mVp-p 27 ~ 33V 200mVp-p 33 ~ 40V rotection type : Shut down o/p voltage with auto-recovery or re-power on to recovery 42V 21 ~ 42V 200mVp-p 38 ~ 46V 200mVp-p 43 ~ 53V Compliance to EN ,3,4,5,6,8,11; ENV50204, EN61547, EN55024, heavy industry level (surge 4KV), criteria A 1.0% HLG-120H-54 54V 27 ~ 54V 2.3A 124.2W 200mVp-p 49 ~ 58V 1.1 ~ 2.3A 1.0% 0.5% 0.5%

2 120W Single Output Switching ower Supply HLG-120H series Mechanical Specification Case No.994A Unit:mm Blank:(HLG-120H) FG (Green/Yellow) AC/L(Brown) AC/N(Blue) A Type:(HLG-120H-_A) FG (Green/Yellow) AC/L(Brown) AC/N(Blue) SJTW 18AWG 3C I67 rated. Cable for I/O connection SJTW 18AWG 3C Vo Io ADJ. ADJ SJTW 14AWG 2C 4.2 4L SJTW 14AWG 2C 4.2 4L -V(Black) +V(Red) V(Black) +V(Red) 38.8 I65 rated. Output voltage and constant current level can be adjusted through internal potential meter. (Can access by removing the rubber stopper on the case.) File Name:HLG-120H-SEC

3 120W Single Output Switching ower Supply HLG-120H series B Type:(HLG-120H-_B) FG (Green/Yellow) AC/L(Brown) AC/N(Blue) SJTW 18AWG 3C SJTW 18AWG 2C SJTW 14AWG 2C 4.2 4L DIM+(Blue) DIM-(White) -V(Black) +V(Red) I67 rated. Output constant current level can be adjusted through output cable by connecting a resistor or 1 ~ 10Vdc or 10V WM signal between DIM+ and DIM-. lease DO NOT connect "DIM-" to "-V". Reference resistance value for output current adjustment (Typical) Resistance value ercentage of rated current 10K 10% 20K 20% 30K 30% 40K 40% 50K 50% 60K 60% 70K 70% 80K 80% 90K 90% 100K 100% OEN 102%~108% 1 ~ 10V dimming function for output current adjustment (Typical) Dimming value ercentage of rated current 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% OEN 102%~108% 10V WM signal for output current adjustment (Typical): Frequency range :100HZ ~ 3KHz Duty value 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% OEN ercentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 102%~108% Block Diagram Fosc : 100KHz I/ FG EMI FILTER & RECTIFIERS FC CIRCUIT FC CONTROL O.L.. O.T.. OWER SWITCHING WM CONTROL RECTIFIERS & FILTER O.V.. O.L.. DETECTION CIRCUIT +V -V DIM+ DIM- (B Type) Derating Curve Static Characteristics fosc : 100KHz LOAD (%) LOAD (%) AMBIENT TEMERATURE ( ) (HORIZONTAL) INUT VOLTAGE (V) 60Hz File Name:HLG-120H-SEC

4 120W Single Output Switching ower Supply HLG-120H series ower Factor Characteristic ower factor will be higher than 0.9 when output loading is 50% or higher. Constant Current Mode F % 60% 70% 80% 90% 100% 230VAC 110VAC LOAD EFFICIENCY vs LOAD (48V Model) HLG-120H series possess superior working efficiency that up to 93.5% can be reached in field applications. EFFICIENCY (%) % 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD 230VAC 110VAC DRIVING METHODS OF LED MODULE There are two major kinds of LED drive method "direct drive" and "with LED driver". A typical LED power supply may either work in "constant voltage mode (CV) or constant current mode (CC)" to drive the LEDs. Mean Well's LED power supply with CV+ CC characteristic can be operated at both CV mode (with LED driver, at area (A) and CC mode (direct drive, at area (B). 100 Vo(%) 50 (A) Constant Voltage area (B) Constant Current area Io (%) Typical LED power supply I-V curve File Name:HLG-120-SEC

5 120W Single Output Switching ower Supply HLG-120H series Direct driving : Under direct driving, the power supply will work in "constant current mode (CC)" and output voltage of the power supply will be clamped by sum of forward voltage (V F) of the LED strip. The total forward voltage of series connecting LEDs is suggested for 60%~95% of power supply rated output voltage due to concern of the best F value and efficiency. ~ AC source I/ HLG-120H O/ With LED driver Using additional driver, the power supply will work in "constant voltage mode (CV)" and output voltage of the power supply will be kept in rated value. In this drive mode, several design issues need to be considered: 1.Output voltage of SU must be higher than total forward voltage of series connecting LEDs by 3V minimum. 2.Input capacitor (Cin) of LED driver circuit should use 47uF ~ 100uF(typ.) of rating depends on the operating frequency of the LED driver. The higher the operating frequency is used, the smaller value of Cin should be chosen, and vice versa. 3.Do not use B type with LED driver. AC source I/ HLG-120H O/ R Cin Cout VF L ~ IC Circuit DIMMING OERATION(for B-type only) Using the built-in dimming function on B-type model can't turn the lighting fixture totally dark. lease refer to the connection method below to achieve 0% brightness of the lighting fixture connecting to the LED power supply unit. Dimming connection diagram for turning the lighting fixture ON/OFF : N FG L Relay Switch Adjuster 0~100K Ohms resistance 1~10V DC Voltage 10V WM Signal Green/ Yellow Brown Blue AC/L AC/N HLG-120H B Type DIM+ DIM- V(-) V(+) Blue White Black Red LED Lighting Using a switch and relay can turn ON/OFF the lighting fixture. 1.Output constant current level can be adjusted through output cable by connecting a resistor or 1~10Vdc or 10V WM signal between DIM+ and DIM-. 2.The LED lighting fixture can be turned ON/OFF by the switch. File Name:HLG-120H-SEC

6 120W Single Output Switching ower Supply HLG-120H series EMI DEBUG SUGGESTION C LED CC driver Chassis of LED Lamp AC source I/ HLG-120H O/ CC IC ~ FG B A D A A. Add a common mode ferrite choke on output wires to reduce the common emission between 10M ~ 300MHz per lighting EMI regulation. B. Chassis of LED lamp and chassis of HLG-120H or the FG wire should be connected to the safety ground to reduce the EMI noise, including the conduction and radiation emission. C. The additional X-Cap and discharge resistor can reduce the low frequency conduction noise between 9K ~ 1MHz per lighting EMI regulation. D. L-C filter should be added at the DC input of LED constant current driver to avoid the differential emission and high frequency noise generated by the CC driver. WATERROOF CONNECTION Waterproof connector Waterproof connector can be assembled on the output cable of HLG-120H to operate in dry/wet/damp or outdoor environment. AC source I/ HLG-120H O/ Size in Configuration (Female) Size in Configuration (Female) M12 Order No. Suitable Current 4-IN 5A/IN M A max. 5-IN 5A/IN M A max. M15 Order No. Suitable Current 2-IN 12A/IN M A max. LED Lamp Cable Joiner Suitable for 14AWG~22AWG 25 Up to four wires can be connected through this cable joiner by soldering or clamping by tools. LED Lamp HLG-120H O/ Wires File Name:HLG-120H-SEC

Test Report: HLG-120H-15 120W Single Output Switching ower Supply DESIGN VERIFY TEST Output Function Test Input Function

7 Test Report: HLG-120H W Single Output Switching ower Supply DESIGN VERIFY TEST Output Function Test Input Function Test rotection Function Test Other Test Component Stress Test SAFETY & E.M.C. TEST Safety Test E.M.C. Test RELIABILITY TEST

8 HLG-120H series DESIGN VERIFY TEST OUTUT FUNCTION TEST NO TEST ITEM SECICATION TEST CONDITION RESULT VERDICT 1 RILE & NOISE V1: 150 mvp-p (Max ) I/: 230 VAC V1: 18.4 mvp-p (Max ) O/:FULL LOAD 2 OUTUT VOLTAGE ADJUST RANGE CH1: 13.5V~17 V I/: 230 VAC I/:115VAC O/:MIN LOAD 3 CURRENT ADJ RANGE 4A~8A I/: 230 VAC O/:FULL LOAD 4 CONSTANT CURRENT REGION 7.5V~15V I/: 230 VAC O/:CV MODE 5 OUTUT VOLTAGE V1: -2 % ~ 2 % (Max) I/: 100 VAC /305VAC TOLERANCE O/:FULL/ 0 % LOAD V~17.442V /230VAC V~ V/115VAC 3.68 A~ 8.96 A O/=7.5V: 8.21 A O/=14V: 8.28 A V1: -0.4 %~ 0.4 % 6 LINE REGULATION V1: - 0.5% ~ 0.5 % (Max) I/:100 VAC ~305 VAC O/:FULL LOAD 7 LOAD REGULATION V1: - 1.5% ~ 1.5 % (Max) I/: 230 VAC O/:FULL ~MIN LOAD 8 SET U TIME 230VAC/ 2500 ms (Max) I/: 230 VAC 115VAC/ 2500 ms (Max) I/: 115 VAC O/:FULL LOAD 9 RISE TIME 230VAC/ 50 ms (Max) I/: 230 VAC 115VAC/ 50 ms (Max) I/: 115 VAC O/:FULL LOAD 10 HOLD U TIME 230VAC/ 12 ms (Typ) I/: 230 VAC 115VAC/ 12 ms (Typ) I/: 115 VAC O/:FULL LOAD 11 OVER/UNDERSHOOT TEST < +5% I/: 230 VAC O/:FULL LOAD 12 DYNAMIC LOAD V1: 1500 mvp-p I/: 230 VAC O/:(1)FULL /Min LOAD 90%DUTY/1KHZ (2)FULL /Min LOAD 90%DUTY/120HZ V1: 0 %~ 0 % V1: -0.4 %~ 0.4 % 230VAC/ 682 ms 115 VAC/ 1364 ms 230VAC/ 8 ms 115 VAC/ 8 ms 230VAC/ 22 ms 115 VAC/ 22 ms TEST:< 5 % 804 mvp-p 860 mvp-p Model: HLG-120H-15 Test Report 2 / 8

9 HLG-120H series INUT FUNCTION TEST NO TEST ITEM SECICATION TEST CONDITION RESULT VERDICT 1 INUT VOLTAGE RANGE 90VAC~305 VAC I/:TESTING O/:FULL LOAD 76 V~305V I/: TEST: OK (1)LOW-LINE-3V=87 V (2)HIGH-LINE=305 V O/:FULL/MIN LOAD ON: 30 Sec. OFF: 30 Sec 10MIN ( AC OWER ON/OFF NO DAMAGE ) 2 INUT FREQUENCY RANGE 47HZ ~63 HZ NO DAMAGE OSC 3 OWER FACTOR 0.95/ 230 VAC FULL LOAD (TY) 0.98/ 115 VAC FULL LOAD (TY) 0.9/ 230 VAC 50% LOAD (TY) 0.9/ 115 VAC 50%LOAD (TY) I/: 100 VAC ~305VAC O/:FULL~MIN LOAD I/: 230 VAC I/: 115 VAC O/:FULL LOAD / 65% LOAD OK F=0.964/230V/100%LOAD F=0.996 /115V/100%LOAD F=0.921/230V/50%LOAD F=0.989 /115V/50%LOAD 4 EFFICIENCY 92% (TY) I/: 230 VAC O/:FULL LOAD 5 INUT CURRENT 277V/ 1 A I/: 277 VAC 230 V/ 1 A I/: 230 VAC 115 V/ 2 A I/: 115 VAC O/:FULL LOAD 6 INRUSH CURRENT 230 V/ 75A (Typ) I/: 230 VAC COLD START O/:FULL LOAD % I =0.493 A/ 277VAC I = 0.57 A/ 230VAC I = 1.14 A/ 115VAC I = 61 A/ 230VAC ROTECTION FUNCTION TEST NO TEST ITEM SECICATION TEST CONDITION RESULT VERDICT 1 OVER LOAD ROTECTION 95 %~108 % I/: 305VAC I/: 230 VAC I/: 100 VAC O/:TESTING 106 %/305VAC 106 %/ 230VAC 106 %//100VAC Constant Current Limiting 2 OVER VOLTAGE ROTECTION V1: 14V~ 17V I/: 305VAC I/: 230 VAC I/: 90 VAC O/:MIN LOAD 19.1 V/ 305VAC 19.1 V/ 230VAC 19.1 V/ 100VAC Shut down o/p voltage with auto recovery or re-power on to recovery 3 OVER TEMERATURE ROTECTION SEC: RTH2: 100±10 O.T.. NO DAMAGE I/: 230 VAC O/:FULL LOAD O.T.. Active Shut down o/p voltage with auto recovery or re-power on to recovery 4 SHORT ROTECTION SHORT EVERY OUTUT 1 HOUR NO DAMAGE I/: 305VAC O/: FULL LOAD NO DAMAGE Hiccup Mode Model: HLG-120H-15 Test Report 3 / 8

10 HLG-120H series OTHER TEST NO TEST ITEM RESULT 1 OWER FACTOR CONSTANT CURRENT MODE CHARACTERISTIC I/:230V/110V O/:100/90/80/70/60/50% LOAD CONSTANT CURRENT MODE BLUE WIRE=110V;RED WIRE=230V 2 EFFIENCY VS LOAD I/:230V/110V O/:100/90/80/70/60/50/40/30/20/10% LOAD BLUE WIRE=110V;RED WIRE=230V Model: HLG-120H-15 Test Report 4 / 8

11 HLG-120H series COMONENT STRESS TEST NO TEST ITEM SECIFICATION TEST CONDITION RESULT VERDICT 1 ower Transistor ( D to S) or (C to E) eak Voltage Q5 Rated STF13NM50N 12A/500V 2 Diode eak Voltage Q101 Rated 1018EbF 79A/60V I/:High-Line +3V = 308V O/: (1)Full Load Turn on (2) Output Short (3)Fulll load continue I/:High-Line +3V =308V O/: (1)Full Load Turn on (2)Output Short (3)Fulll load continue (1) 474 V (2) 450 V (3) 454 V (1) 40.2 V (2) 10.2 V (3) 33 V Q102 Rated I/:High-Line +3V = 308 V (1) 53.4 V 1018EbF 79A/60V O/: (1)Full Load Turn on (2) 58 V (2)Output Short (3) 35.2 V (3)Fulll load continue 3 Input Capacitor Voltage C5 Rated: 82u/450V 10Kh KXG 4 Control IC Voltage Test U 900 Rated L6599AD 8.85V~16V 5.F.C Transistor Q1 RatedI ( D to S) or (C to E) eak Voltage ST21NM60N 17A/600V I/:High-Line +3V = 308V O/: (1)Full Load Turn on /Off (2) Min load Turn on /Off (3)Full Load /Min load Change I/:High-Line +3V = 308V O/: (1)Full Load Turn on /Off (2) Min load Turn on /Off (3)Full Load /Min load Change I/:High-Line +3V = 308 V O/: (1)Full Load Turn on (2)Output Short (3)Fulll load continue (1) V (2) V (3) V (1) V (2) V (3) V (1) 508 V (2) 450 V (3) 456 V Model: HLG-120H-15 Test Report 5 / 8

12 HLG-120H series SAFETY & EMC TEST SAFETY TEST NO TEST ITEM SECICATION TEST CONDITION RESULT VERDICT 1 WITHSTAND VOLTAGE IEC I/-O/: 4 KVAC/min I/-O/: ma I/-O/: 3.75KVAC/min<10mA I/-FG: 2.256KVAC/min I/-FG: ma I/-FG:1.88 KVAC/min<10mA O/-FG: 1.8 KVAC/min O/-FG: 3.65 ma O/-FG:1.5KVAC/min<10mA NO DAMAGE 2 ISOLATION RESISTANCE I/-O/:500VDC>100MΩ I/-FG: 500VDC>100MΩ O/-FG:500VDC>100MΩ I/-O/: 500 VDC I/-FG: 500 VDC O/-FG: 500 VDC I/-O/: 30 GΩ I/-FG: 30 G Ω O/-FG: 30 G Ω NO DAMAGE 3 GROUNDING CONTINUITY IEC FG(E) TO CHASSIS OR TRACE < 100 mω 40A / 2min 11 mω 4 LEAKAGE CURRENT IEC AROVAL 0 < 0.75 ma / 240VAC I/: 240 VAC O/:Min LOAD L-FG: 0.22 ma N-FG: 0.22 ma E.M.C TEST NO TEST ITEM SECICATION TEST CONDITION RESULT VERDICT 1 HARMONIC EN CLASS A CLASS C CLASS D I/: 240VAC/50HZ LOAD:LED/ELECTRONIC LOAD O/:100%/50% LOAD ASS 2 CONDUCTION EN55022 EN55015 I/: 230 VAC (50HZ) ASS CLASS B O/:FULL/50% LOAD Test by certified Lab 3 RADIATION EN55022 EN55015 I/: 230 VAC (50HZ) ASS CLASS B O/:FULL LOAD Test by certified Lab 4 E.S.D EN I/: 230 VAC/50HZ CRITERIA A INDUSTRY O/:FULL LOAD AIR:8KV / Contact:4KV 5 E.F.T EN INDUSTRY INUT: 2KV I/: 230 VAC/50HZ O/:FULL LOAD CRITERIA A 6 SURGE IEC INDUSTRY L-N :2KV L,N-E:4KV I/: 230 VAC/50HZ O/:FULL LOAD CRITERIA A Model: HLG-120H-15 Test Report 6 / 8

HLG-120H series Reliability Test NO TEST ITEM SECIFICATION TEST CONDITION RESULT VERDICT 1. THERMO TRACER TEST Before potted ( ROOM AMBIENT) MODEL:HLG-120H-24 TEST CONDITION:230V FULL LOAD TA=23.

13 HLG-120H series Reliability Test NO TEST ITEM SECIFICATION TEST CONDITION RESULT VERDICT 1. THERMO TRACER TEST Before potted ( ROOM AMBIENT) MODEL:HLG-120H-24 TEST CONDITION:230V FULL LOAD TA= TEMERATURE RISE TEST MODEL:HLG-120H ROOM AMBIENT BURN-IN:2.5 HRS I/: 230VAC O/: FULL LOAD Ta= HIGH AMBIENT BURN-IN: 5.5 HRS I/: 230VAC O/: FULL LOAD Ta=54.8 osition Temp 1 LF LF C BD Q L1 coil Q C T1 coil C C Q C C LF NO osition /N ROOM AMBIENT Ta= 27.6 HIGH AMBIENT Ta= BD1 4A/800V GLASS GBU Q1 IRFB20N50K 20A/500V L2 TF Q5 STF13NM50N 12A/500V D2 BYV29X-600 7A/600V RTH2 1/2W 200KΩ 1% C5 82u/450V 10Kh *30 KXG T1 TF Q101 IRF1404bF 202A/40V D9 BYV26EG 1A/1KV C u/16V UL10Kh 10*20 ZLH C201 47u/50V UL10Kh 6.3*11 YXM C38 100u/25V UL10Kh 6.3*11 YXM U900 WM L6599AD U1 NC1608B CASE U CASE OVER LOAD BURN-IN TEST NO DAMAGE 1 HOUR ( MIN ) 4 LOW TEMERATURE TURN ON AFTER 2 HOUR TURN ON TEST I/: 305 VAC O/:O/ SHORT TEST I/: 305 VAC/230 VAC/100VAC O/:95% load Ta= -40 TEST:OK TEST:OK 5 HIGH HUMIDITY HIGH TEMERATURE HIGH VOLTAGE TURN ON TEST AFTER 12 HOURS IN CHAMBER ON CONTROL 60 NO DAMAGE I/: 305 VAC O/:95% load Ta= 60 HUMIDITY= 95 %R.H TEST:OK Model: HLG-120H-15 Test Report 7 / 8

14 HLG-120H series 6 TEMERATURE %(0~50 ) I/: 230 VAC + 0 %(0~50 ) COEFFICIENT O/:FULL LOAD 7 STORAGE TEMERATURE TEST 1. Thermal shock Temperature: -45 ~ Temperature change rate :25 / MIN 3. Dwell time low and high temperature : 30 MIN/EACH 4. Total test cycle:5 CYCLE 5. Input/Output condition: STATIC OK 8. THERMAL SHOCK TEST 1. Thermal shock Temperature: -35 ~ Temperature change rate :25 / MIN 3. Dwell time low and high temperature : 30 MIN/EACH 4. Total test cycle:10 CYCLE 5. Input/Output condition: 230VAC/Full Load TURN ON/58 SEC;TURN OFF/2 SEC. OK 9 VIBRATION TEST 1 Carton & 1 Set (1) Waveform: Sine Wave (2) Frequency:10~500Hz (3) Sweep Time:12min/sweep cycle (4) Acceleration:5G (5) Test Time:72min in each axis (X.Y.Z) (6) TEST:OK 10 CAACITOR LIFE CYCLE HLG-120H-12:SUOSE C102 IS THE MOST CRITICAL COMONENT (1) I/: 230VAC O/:FULL LOAD Ta= 25 LIFE TIME (2) I/: 230VAC O/:FULL LOAD Ta= 60 LIFE TIME (1) HRS (2) HRS 11 MTBF MIL-HDBK-217F NOTICES2 ARTS COUNT TOTAL FAILURE RATE: K HRS DATE SAMLE TEST RESULT TESTER AROVAL 2010/3/3 RD SAMLE ASS SANFORD SU VINCENT TSENG 2010/5/10 RODUCT SAMLE ASS SANFORD SU VINCENT TSENG 2003/12/12 A50-F023 Model: HLG-120H-15 Test Report 8 / 8

125W Single Output with PFC Function

125W Single Output with PFC Function Jameco SKU Number: 2102465 125W Single Output with FC Function S-125 s e ries SECIFICATION MODEL OUTUT INUT ROTECTION ENVIRONMENT SAFETY & EMC (Note 4) OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE