WINTER 14 EXAMINATION. Model Answer. 1) The answers should be examined by key words and not as word-to-word as given in the
|
|
- Basil Watson
- 5 years ago
- Views:
Transcription
1 WINTER 14 EXAMINATION Subject Code: Model Answer Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given in the model answer scheme. 2) The model answer and the answer written by candidate may vary but the examiner may try to assess the understanding level of the candidate. 3) The language errors such as grammatical, spelling errors should not be given more Importance (Not applicable for subject English and Communication Skills). 4) While assessing figures, examiner may give credit for principal components indicated in the figure. The figures drawn by candidate and model answer may vary. The examiner may give credit for any equivalent figure drawn. 5) Credits may be given step wise for numerical problems. In some cases, the assumed constant values may vary and there may be some difference in the candidate s answers and model answer. 6) In case of some questions credit may be given by judgement on part of examiner of relevant answer based on candidate s understanding. 7) For programming language papers, credit may be given to any other program based on equivalent concept. 1
2 1. Attempt Any Ten of the following: (20 Marks) a. Define active and passive components. Ans. (Each definition 1 Mark) Active Component The electrical components which are capable of amplifying or processing electrical signals are called active components. Example: Diode, Transistor etc. Passive Component The electrical components which are not capable of amplifying or processing electrical signals are called active components. Example: Inductor, Capacitor, Resistor etc. b. Draw the symbol of N-channel and P-channel JFET. Ans. (Correct symbols 1 Mark each) c. Give two applications of light emitting diode. Ans. (Any two correct applications 1 Mark each) 1. Infra-red LEDs are used in burglar alarm systems. 2. For solid state video displays which are rapidly replacing CRT. 3. An image sensing circuit for picture phones 4. In array of different types for displaying alpha-numeric characters. d. Define current gain and voltage gain of common emitter amplifier. Ans. (Correct definitions 1 Mark each) Current Gain Current Gain of CE amplifier is defined as the ratio of collector current (I C ) to the base current (I B ). Voltage Gain Voltage Gain of CE amplifier is defined as the ratio of output voltage (V CE ) to the input voltage (V BE ). 2
3 e. List four specifications of PN Junction Diode. Ans. (Any 4 Correct specifications 2 Marks) The specifications of PN Junction Diode are: 1. Maximum reverse voltage (V) 2. Repetitive peak voltage (V) 3. Maximum forward current (ma) 4. Power dissipation. 5. Repetitive peak forward current. 6. Average forward current (A) 7. Surge current (A) 8. Operating ambient temperature ( 0 C) 9. Maximum junction temperature ( 0 C) 10. Forward voltage (V) f. Give four advantages of IC s. Ans. (Any 4 Correct advantages 2 Marks) 1. The physical size of an IC is extremely small (generally thousand times smaller) than that of discrete circuits. 2. The weight of an IC is very less as compared to that of equivalent discrete circuits. 3. The reduction in power consumption is achieved due to extremely small size of IC. 4. Interconnection errors are non-existent in practice. 5. Temperature differences between components of a circuit are small. 6. Close matching of components and temperature coefficients is possible. 7. In case of circuit failure, it is very easy to replace an IC by a new one. 8. Active devices can be generously used as they are cheaper than passive components. g. Draw the circuit diagram of CLC filter. Ans. (Any Relevant Correct diagram 2 Marks) 3
4 h. Define transconductance (gm) and amplification factor (μ) for a JFET. Ans. (Correct definitions 1 Mark each) Transconductance Transconductance is defined as the ratio of change in Drain current ( I D ) to change in Gate to Source Voltage ( V GS ) at a constant V DS. Amplification Factor Amplification Factor is defined as the ratio of change in Drain to Source Voltage ( V DS ) to change in Gate to Source Voltage ( V GS ) at a constant I D. i. Draw the symbol of zener diode and tunnel diode. Ans. (Zener diode 1 Mark and Tunnel diode 1 Mark) Symbol of a Zener Diode j. Give four applications of analog IC s. Symbols of tunnel diode Ans. (Any Four Correct Applications 2 Marks) Analog IC s are used in: 1. Aircrafts 2. Space Vehicles 3. RADAR 4. Communication Systems 5. Radio k. Draw the symbol of NPN and PNP transistor. Ans. (Each correct symbol 1 Mark) 4
5 l. Draw the symbol of variable resistor and electrolytic capacitor. Ans. (Each correct symbol 1 Mark) 2. Attempt any four of the following: (16 Marks) a. Give four applications of electronics in medical field. Ans. (Any Four Correct Applications 4 Marks) 1. Electro cardiograph (ECG): It is used to find the condition of the heart of a patient. 2. X-Ray Machine: It is used for taking pictures of internal bone structures. 3. Ultra Sound Scanner: It is used to take pictures and examine the functions of Brain, Kidney etc. 4. Electrical Enceplograph (EEG): It is used for neurological investigations. 5. Cathode Ray Oscilloscope: It is used for studying muscle actions within the body. 6. Magnetic Resonance Imaging: It is used for investigating tumors in brain or other parts of body. b. Explain the working principle of varactor diode. Ans. (Diagram 2 Marks, Principle 2 Marks) Working principle: The varactor or varicap is a diode that exhibits the characteristics of a variable capacitor. The depletion region at the p-n junction acts as the dielectric and plates of a common capacitor and is caused to expand and contract by the voltage applied to the diode. This action increases and decreases the capacitance. The schematic symbol for the varactor is shown beside. Varactor diodes are used in tuning circuits and can be used as high-frequency amplifiers. 5
6 c. Explain the working of PNP transistor with the help of constructional diagram. Ans. (Diagram 2 Marks, Explanation 2 Marks) Working (OR) 1) Base emitter junction is forward biased and base collector is reverse biased. 2) The emitter is common and base is the input terminal, collector is the output terminal. 3) IE = IB + IC basic equation of transistor. 4) The holes from emitter are repelled and they move towards the base. Base is lightly doped and they get attracted by collector which is reverse biased. 5) The current gain for CE mode is β= Ic/Ib d. Explain the working of single stage CE amplifier with the help of circuit diagram. Ans. (Diagram 2 Marks, Working 2 Marks) 6
7 Working 1. The circuit diagram of a voltage amplifier using single transistor in CE configuration is shown in figure. It is also known as a small-signal single-stage CE amplifier or RC coupled CE amplifier. It is also known as a voltage amplifier. 2. The potential divider biasing is provided by resistors R1, R2 and RE. 3. It provides good stabilization of the operating point. The capacitors CC1 and CC2 are called the coupling capacitors used to block the AC voltage signals at the input and the output sides. 4. The capacitor CE works as a bypass capacitor. It bypasses all the AC currents from the emitter to the ground and avoids the negative current feedback. It increases the output AC voltage. 5. The resistance RL represents the resistance of whatever is connected at the output. It may be load resistance or input resistance of the next stage. e. Draw the experimental setup for obtaining the reverse characteristics of a zener diode and draw its V-I Characteristics for the same. Ans. (Circuit Diagram 2 Marks, V I Characteristics 2 Marks) 7
8 f. A crystal oscillator has L= 0.33 H and C = pf. Find the series resonant frequency. Ans. (Formula 1 Mark, Steps 2 Marks, Final Answer 1 Mark) Given: L= 0.33 H C = pf To Find: Series Resonant Frequency (f) Formula: f 0 = Solution: f 0 = = = 1.08 MHz Therefore, Series resonant Frequency f 0 = 1.08 MHz Q.3 Attempt any FOUR of the following (16 Marks) a) Compare VDR and LDR on the basis of working principle and characteristics. Ans. (Working Principle 2 Marks, Characteristics 2 Marks) Sr.No Parameter VDR LDR 1 Working Principle 2 Characteristics The variation in voltage is reflected through an appreciable change in resistance. The resistance of VDR decreases. The resistance depends on the intensity of light, as resistance decreases with increase in light intensity. b) Explain the operating principle and characteristics of LED. Ans. (Operating principle 2 Marks, Characteristics 2 Marks) Operating Principle When the LED is forward biased, the electrons in the n-region will cross the junction and recombine with the holes in the p-type material. When the recombination takes place, these electrons return back to the valence band which is at a lower energy level than the conduction band. While returning back, the recombining electrons give away the excess energy in the form of light as shown below. This process is called as electroluminescence. In this way an LED emits light. This is the principle of operation of LED. 8
9 Characteristics c) Draw the construction of P-channel JFET and explain formation of depletion layer. Ans. Construction (1 Mark) Formation of Depletion Region (1 Mark) (OR) In P-type materials the polarities of V GG, V GS, V DD, and V DS are exactly opposite to those for the N-channel device. The direction of drain current is also reversed. The drain current flows due to the majority carriers i.e. holes. The drain current increases with an increase in the negative V DS voltage. The gate to source voltage V GS is positive and the drain current decreases with increase in the positive V GS voltage due to reduction in channel width. 9
10 Depletion Layer Formation Diagram (2 Marks) d) Compare CE and CB configuration on the basis of: i. Input Impedance ii. Output Impedance Ans. (Each correct point 1 Mark) iii. Current Gain iv. Voltage Gain Parameters CB CE Input Impedance Low (20Ω) Medium (1kΩ) Output Impedance Very High (1MΩ) Medium (40kΩ) Current Gain Nearly One High Voltage Gain High Higher than CB e) A transistor has I B = 105μA and I C = 2.05mA. Find β and α of the transistor. Ans. (Formula 1 Mark each, Correct β and α 1 Marks Each) Given: I B = 105μA I C = 2.05mA To find: β and α of the transistor Formula: β = and α = Solution: β = = = α = = = 0.95 Hence, β = and α =
11 f) Draw the circuit diagram of crystal oscillator & write the expression for frequency of oscillation. Ans. (Circuit Diagram 2 Marks, Expression 2 Marks) The frequency of oscillation of Crystal oscillator is given by, f 0 =. Q.4 Attempt any FOUR of the following (16 Marks) a) Give four applications of Schottky Diode. Ans. (Any 4 Correct Applications 1 Mark each) Applications of Schottky Diode 1. Switching Mode Power Supply (SMPS) 2. AC to DC Converter 3. Radar System 4. Schottky TTL logic for computer 5. Mixers and detectors in communication equipment. b) State the need of rectification. Ans. (Correct explanation 4 Marks) 1. Every electronic circuit such as amplifiers needs a dc power source for its operation. 2. This dc voltage has to be obtained from the ac supply. 3. For this the ac supply has to be reduced (stepped down) first using a step down transformer and then converted to dc by using rectifier. 11
12 c) State the advantages of FET over BJT (any four points). Ans. (1 Mark for each any four correct points) Advantages of FET over BJT 1. It has very high input impedance 2. Noise is reduced 3. It has smaller size, longer life and high efficiency 4. It has high power gain 5. As it has a negative temperature coefficient of resistance, it avoids the risk of thermal runaway. 6. Frequency response is excellent 7. It has large bandwidth. d) Draw and explain the working of choke input or LC filter. Ans. (Any relevant Circuit 2 Marks, Working 2 Marks) Note: Circuit without rectifier should also be considered Working The combination of series inductor (L) filter on shunt capacitor (C) filter is known as LC filter. This filter is also known as the rectifier is applied across the input terminals of the choke input filter. The pulsating output of the rectifier contains AC as well as DC component of current. The choke L passes the DC component from the rectifier because its DC resistance R is very small. It opposes the AC component capacitor C bypasses AC component that presents at the output of inductor L but prevents DC component to flow through it. Therefore only DC component reaches to the load resistor RL. 12
13 e) Draw the frequency response curve of single stage RC coupled amplifier. Explain its behavior at low frequencies and high frequencies. (i.e. below 50 Hz and above 20 KHz respectively) Ans. (Frequency Response 2 Marks, Explanation 2 Marks) Explanation Low frequency region: In low frequency region, the voltage gain (or output voltage) decreases with the decrease in frequency of an input AC signal due to the increased reactance of the coupling and bypass capacitors. High frequency region: In high frequency region, the voltage gain (or output voltage) decreases with the increase in frequency of an input AC signal due to the BJT internal capacitances and stray capacitance. f) Draw the circuit diagram of transformer coupled amplifier and its frequency response. Ans. (Circuit Diagram 2 Marks, Frequency Response 2 Marks) Frequency Response of Transformer Coupled Amplifier 13
14 5. Attempt any FOUR of the following: 16 Marks a. Explain the operating principle of PN junction diode under forward bias condition. Ans. (Diagram 2 Marks, Principle 2 Marks) (OR) Principle If the p-region (anode) is connected to the positive terminal of the external DC source and n- side (cathode) is connected to the negative terminal of the DC source then the biasing is said to be forward biasing. Due to the negative terminal of external source connected to the n-region, free electrons from n-side are pushed towards the p-side. Similarly the positive end of the supply will push holes from p-side towards the n-side. With increase in the external supply voltage V, more and more number of holes (p-side) and electrons (n-side) start travelling towards the junction as shown in figure. The holes will start converting the negative ions into neutral atoms and the electrons will convert the positive ions into neutral atoms. As a result of this, the width of depletion region will reduce. Due to reduction in the depletion region width, the barrier potential will also reduce. Eventually at a particular value of V the depletion region will collapse. Now there is absolutely no opposition to the flow of electrons and holes. Hence a large number of electrons and holes (majority carriers) can cross the junction under the influence of externally connected DC voltage. b. State four advantages of centre tapped full wave rectifier over half wave rectifier. Ans. (4 advantages - 1 Mark Each) 1. The DC output voltage and load current values of full wave rectifier are twice than those of half wave rectifier. 2. The ripple factor is much less (0.482) than that of half wave rectifier (1.21). 3. The efficiency of full wave rectifier is twice (81.2%) than that of half wave rectifier (40.6%). 4. The TUF of full wave rectifier is more than that of half wave rectifier. 14
15 c. Draw the experimental setup to plot input and output characteristics of CE configuration and label them. Ans. (Circuit Diagram 2 Marks, Labeling 2 Marks) d. Draw the circuit diagram of bistable multivibrator using transistor and explain its working. Ans. (Correct Diagram 2 Marks, Working 2 Marks) Working 1. When Vcc supply is switched ON one of the transistor will start conducting more than the other then because of feedback action, this transistor will be driven into saturation and the other to cut-off. 2. Assume that Q1 is ON and Q2 is OFF. It is a stable state of circuit. 3. A negative pulse applied to set input will turn OFF the transistor Q1 and Q2 switches ON. 4. Suppose positive pulse is applied at the reset input. It will cause Q2 to conduct. As Q2 conducts its collector voltage falls and it cut-offs Q1. This Q1 is OFF and Q2 is ON. 5. Now if positive pulse is applied at the set input, it will switch the circuit back to its original stable state i.e. Q1 is ON and Q2 is OFF. 15
16 e. List two advantages and two disadvantages of direct coupled amplifier over RC coupled amplifier. Ans. (Any 2 Correct points 2 Marks each) Two Advantages of Direct Coupled Amplifier over RC Coupled Amplifier: 1. The impedance matching is good. 2. Frequency response is good for low frequency. 3. Space and weight is less. 4. Cost is less. Two Disadvantages of Direct Coupled Amplifier over RC Coupled Amplifier: 1. Frequency response is poor in audio range. 2. It cannot amplify high frequency signal. 3. It has poor temperature stability. f. Draw and describe zener diode voltage regulator. Ans. (Correct Diagram- 2 Marks, description 2 Marks) Working For proper operation, the input voltage Vi must be greater than the Zener voltage Vz. This ensures that the Zener diode operates in the reverse breakdown condition. The unregulated input voltage Vi is applied to the Zener diode. Suppose this input voltage exceeds the Zener voltage. This voltage operates the Zener diode in reverse breakdown region and maintains a constant voltage, i.e. Vz = Vo across the load inspite of input AC voltage fluctuations or load current variations. The input current is given by, IS = Vi Vz / Rs = Vi Vo / Rs We know that the input current I S is the sum of Zener current I z and load current IL. Therefore, I S = I z + I L or Iz = Is - I L As the load current increase, the Zener current decreases so that the input current remains constant. According to Kirchhoff s voltage law, the output voltage is given by, Vo = Vi Is. Rs As the input current is constant, the output voltage remains constant (i.e. unaltered or unchanged). The reverse would be true, if the load current decreases. This circuit is also correct for the changes in input voltage. As the input voltage increases, more Zener current will flow through the Zener diode. This increases the input voltage Is, and also the voltage drop across the resistor Rs, but the load voltage Vo would remain constant. The reverse would be true, if the decrease in input voltage is not below Zener voltage. 16
17 Thus, a Zener diode acts as a voltage regulator and the fixed voltage is maintained across the load resistor RL. 6. Attempt any four of the following: (16 Marks) a. Define the following terms with respect to PN junction diode: i. Static Resistance ii. Dynamic Resistance Ans. (Correct definition 2 Marks each) Definition of static resistance: The resistance of a diode at the operating point can be obtained by taking the ratio of VF and IF. The resistance offered by the diode to the forward DC operating conditions is called as DC or static resistance. Definition of Dynamic resistance: The resistance offered by a diode to the AC operating conditions is known as the Dynamic Resistance. b. What is a voltage regulator? State the necessity of voltage regulator. Ans. (Voltage Regulator 2 Marks, Necessity 2 Marks) Voltage Regulator is a circuit which will try to maintain the output voltage constant under all the operating circumstances. The output voltage will not change though there is a change in input voltage. The voltage regulator is the last block in the d.c regulated power supply. Need of Voltage Regulator The expensive electronic instruments cannot use the unregulated dc power supply because the output contains ripples and its content in output will increase with increase in load current. Hence, the output voltage also does not remain constant. So to get a constant output voltage inspite of changes in input voltage, temperature, load current we need the voltage regulator. c. State the need of biasing for transistor. Draw the circuit diagram of voltage divider biasing. Ans. (Need of biasing 2 Marks, Circuit diagram 2 Marks) Need of Biasing for Transistor: (any four) 1. The transistor should be biased in the active region if it is to be used for amplification and in saturation and cut off if it is used as a switch. 2. The Q point should be adjusted approximately at the center of the load line for voltage amplifier application. 3. The value of stability factor (S) should be as small as possible. 4. Q point should be stabilized by introducing a negative feedback in the biasing circuit. 5. The Q-point should not be affected due to temperature changes or device to device variation. 6. Bypass capacitor should be included to avoid reduction in voltage gain due to negative feedback. 7. Transistor should be biased in the linear region of the transfer characteristics. 17
18 Circuit d. Write two applications of astable multivibrator and two application of bistable multivibrator. Ans. (any 2 relevant applications 2 mark each) Two applications of astable multivibrator: 1. It is used in square wave generator. 2. It is used for voltage to frequency converters. 3. In ramp generator. 4. In flasher circuit. Two applications of bistable multivibrator: 1. It is used as a memory element in computer logiv circuit. 2. It is used as a memory element in shift registers. 3. It is used as a memory element in counters. e. Draw the drain characteristics of JFET and show the different regions on it. Ans. (Correct Diagram with labeling of regions 4 Marks) (OR) 18
19 f. Following figure shows a centre tapped full wave rectifier circuit. Assuming both diodes to be ideal determine: 1. DC output voltage (V dc ) 2. Peak Inverse Voltage (PIV) of diode Ans. Given: V 1 = 230V = ½ Mark 1. We know that the secondary voltage V 2 = x V 1 = 230 x = 46 volts 1 Mark Maximum value of secondary voltage V m = 2 x V 2 = 2 x 46 = volts 1 Mark Therefore, DC voltage V dc = = = volts 1 Mark 2. PIV of Diode = V m = volts. ½ Mark 19
MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION (Autonomous) (ISO/IEC Certified)
WINTER 16 EXAMINATION Model Answer Subject Code: 17213 Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given in the model answer scheme. 2)
More informationSummer 2015 Examination. 1) The answers should be examined by key words and not as word-to-word as given in the model answer scheme.
Summer 2015 Examination Subject Code: 17213 Model Answer Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given in the model answer scheme.
More informationMODEL ANSWER SUMMER 17 EXAMINATION 17213
MODEL ANSWER SUMMER 17 EXAMINATION 17213 Subject Title: Basic Electronics Subject Code: Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given
More informationSUMMER 13 EXAMINATION Subject Code: Model Answer Page No: / N
Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given in the model answer scheme. 2) The model answer and the answer written by candidate
More informationScheme Q.1 Attempt any SIX of following: 12-Total Marks a) Draw symbol NPN and PNP transistor. 2 M Ans: Symbol Of NPN and PNP BJT (1M each)
Q. No. WINTER 16 EXAMINATION (Subject Code: 17319) Model Answer Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given in the model answer
More informationMAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION (Autonomous) (ISO/IEC Certified) Summer 2016 EXAMINATIONS.
Summer 2016 EXAMINATIONS Subject Code: 17321 Model Answer Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given in the answer scheme. 2) The
More informationMAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION (Autonomous) (ISO/IEC Certified) Subject Code: Model Answer Page No: 1/
MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION (Autonomous) (ISO/IEC 27001 2005 Certified) SUMMER 13 EXAMINATION Subject Code: 12025 Model Answer Page No: 1/ Important Instructions to examiners: 1) The
More informationSubject Code: Model Answer Page No: / N
Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given in the model answer scheme. 2) The model answer and the answer written by candidate
More informationMAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION (Autonomous) (ISO/IEC Certified) Summer 2016 EXAMINATIONS
Summer 2016 EXAMINATIONS Subject Code: 17213 Model Answer Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given in the answer scheme. 2) The
More informationMODEL ANSWER SUMMER 17 EXAMINATION 17319
MODEL ANSWER SUMMER 17 EXAMINATION 17319 Subject Title: Electronics Devices and Circuits. Subject Code: Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word
More informationMAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION (Autonomous) (ISO/IEC Certified) MODEL ANSWER
Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given in the model answer scheme. 2) The model answer and the answer written by candidate
More informationF.Y. Diploma : Sem. II [CO/CD/CM/CW/IF] Basic Electronics
F.Y. Diploma : Sem. II [CO/CD/CM/CW/IF] Basic Electronics Time : 3 Hrs.] Prelim Question Paper Solutions [Marks : 100 Q.1 Attempt any TEN of the following : [20] Q.1(a) Give the classification of capacitor.
More informationMAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION (Autonomous) (ISO/IEC Certified)
WINTER 18 EXAMINATION Subject Name: Basic Electronics Model Answer Subject Code: 17321 I m p o r t a n t I n s t r u c t i o n s t o e x a m i n e r s : 1) The answers should be examined by key words and
More informationQ1 A) Attempt any six: i) Draw the neat symbol of N-channel and P-channel FET
Subject Code:17319 Model Answer Page1 of 27 Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given in the model answer scheme. 2) The model
More informationWINTER 17 EXAMINATION Subject Name: Basic Electronics Model Answer Sub Code:
Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given in the model answer scheme. 2) The model answer and the answer written by candidate
More informationCode No: Y0221/R07 Set No. 1 I B.Tech Supplementary Examinations, Apr/May 2013 BASIC ELECTRONIC DEVICES AND CIRCUITS (Electrical & Electronics Engineering) Time: 3 hours Max Marks: 80 Answer any FIVE Questions
More informationOBJECTIVE TYPE QUESTIONS
OBJECTIVE TYPE QUESTIONS Q.1 The breakdown mechanism in a lightly doped p-n junction under reverse biased condition is called (A) avalanche breakdown. (B) zener breakdown. (C) breakdown by tunnelling.
More informationPaper-1 (Circuit Analysis) UNIT-I
Paper-1 (Circuit Analysis) UNIT-I AC Fundamentals & Kirchhoff s Current and Voltage Laws 1. Explain how a sinusoidal signal can be generated and give the significance of each term in the equation? 2. Define
More informationDHANALAKSHMI COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING EC6202 ELECTRONIC DEVICES AND CIRCUITS
DHANALAKSHMI COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING EC6202 ELECTRONIC DEVICES AND CIRCUITS UNIT-I - PN DIODEAND ITSAPPLICATIONS 1. What is depletion region in PN junction?
More informationCode No: R Set No. 1
Code No: R05010204 Set No. 1 I B.Tech Supplimentary Examinations, Aug/Sep 2007 ELECTRONIC DEVICES AND CIRCUITS ( Common to Electrical & Electronic Engineering, Electronics & Communication Engineering,
More informationModule 04.(B1) Electronic Fundamentals
1.1a. Semiconductors - Diodes. Module 04.(B1) Electronic Fundamentals Question Number. 1. What gives the colour of an LED?. Option A. The active element. Option B. The plastic it is encased in. Option
More informationShankersinh Vaghela Bapu Institute of Technology INDEX
Shankersinh Vaghela Bapu Institute of Technology Diploma EE Semester III 3330905: ELECTRONIC COMPONENTS AND CIRCUITS INDEX Sr. No. Title Page Date Sign Grade 1 Obtain I-V characteristic of Diode. 2 To
More informationSYLLABUS OSMANIA UNIVERSITY (HYDERABAD)
UNIT - 1 i SYLLABUS OSMANIA UNIVERSITY (HYDERABAD) JUNCTION DIODE Different Types of PN Junction Formation Techniques, PN Junction Characteristics, Biasing, Band Diagrams and Current Flow, Diode Current
More informationScheme Q.1 Attempt any SIX of following 12-Total Marks 1 A) Draw symbol of P-N diode, Zener diode. 2 M Ans: P-N diode
Q. No. WINTER 16 EXAMINATION (Subject Code: 17321) Model Answer Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given in themodel answer scheme.
More informationState the application of negative feedback and positive feedback (one in each case)
(ISO/IEC - 700-005 Certified) Subject Code: 073 Model wer Page No: / N Important Instructions to examiners: ) The answers should be examined by key words and not as word-to-word as given in the model answer
More informationSummer 2015 Examination. 1) The answers should be examined by key words and not as word-to-word as given in the model answer scheme.
Summer 2015 Examination Subject Code: 17215 Model Answer Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given in the model answer scheme.
More informationAE103 ELECTRONIC DEVICES & CIRCUITS DEC 2014
Q.2 a. State and explain the Reciprocity Theorem and Thevenins Theorem. a. Reciprocity Theorem: If we consider two loops A and B of network N and if an ideal voltage source E in loop A produces current
More informationMAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION (Autonomous) (ISO/IEC Certified)
WINTER 2017 EXAMINATION Subject Name: Basic Electronics Model Answer Subject Code: 17321 Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given
More informationSUMMER 14 EXAMINATION Model Answer. Subject Code: Page No: 1/
SUMMER 14 EXAMINATION Model Answer Subject Code: 17215 Page No: 1/ Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given in the model answer
More informationUNIT 3: FIELD EFFECT TRANSISTORS
FIELD EFFECT TRANSISTOR: UNIT 3: FIELD EFFECT TRANSISTORS The field effect transistor is a semiconductor device, which depends for its operation on the control of current by an electric field. There are
More information1 Attempt any TEN: 20- Total Marks. a Define electronics. Give examples of active components. 2M
Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given in themodel answer scheme. 2) The model answer and the answer written by candidate may
More informationFREQUENTLY ASKED QUESTIONS
FREQUENTLY ASKED QUESTIONS UNIT-1 SUBJECT : ELECTRONIC DEVICES AND CIRCUITS SUBJECT CODE : EC6202 BRANCH: EEE PART -A 1. What is meant by diffusion current in a semi conductor? (APR/MAY 2010, 2011, NOV/DEC
More informationR a) Draw and explain VI characteristics of Si & Ge diode. (8M) b) Explain the operation of SCR & its characteristics (8M)
SET - 1 1. a) Define i) transient capacitance ii) Diffusion capacitance (4M) b) Explain Fermi level in intrinsic and extrinsic semiconductor (4M) c) Derive the expression for ripple factor of Half wave
More informationEC6202-ELECTRONIC DEVICES AND CIRCUITS YEAR/SEM: II/III UNIT 1 TWO MARKS. 1. Define diffusion current.
EC6202-ELECTRONIC DEVICES AND CIRCUITS YEAR/SEM: II/III UNIT 1 TWO MARKS 1. Define diffusion current. A movement of charge carriers due to the concentration gradient in a semiconductor is called process
More informationLecture 3: Transistors
Lecture 3: Transistors Now that we know about diodes, let s put two of them together, as follows: collector base emitter n p n moderately doped lightly doped, and very thin heavily doped At first glance,
More informationMAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION (Autonomous) (ISO/IEC Certified)
WINTER 16 EXAMINATION Model Answer Subject Code: 17215 Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given in the model answer scheme. 2)
More informationPESIT BANGALORE SOUTH CAMPUS BASIC ELECTRONICS
PESIT BANGALORE SOUTH CAMPUS QUESTION BANK BASIC ELECTRONICS Sub Code: 17ELN15 / 17ELN25 IA Marks: 20 Hrs/ Week: 04 Exam Marks: 80 Total Hours: 50 Exam Hours: 03 Name of Faculty: Mr. Udoshi Basavaraj Module
More informationReg. No. : Question Paper Code : B.E./B.Tech. DEGREE EXAMINATION, NOVEMBER/DECEMBER Second Semester
WK 5 Reg. No. : Question Paper Code : 27184 B.E./B.Tech. DEGREE EXAMINATION, NOVEMBER/DECEMBER 2015. Time : Three hours Second Semester Electronics and Communication Engineering EC 6201 ELECTRONIC DEVICES
More informationWINTER 14 EXAMINATION. Model Answer. Subject Code: ) The answers should be examined by key words and not as word-to-word as given in the
Subject Code: 17215 WINTER 14 EXAMINATION Model Answer Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given in the model answer scheme. 2)
More informationCHADALAWADA RAMANAMMA ENGINEERING COLLEGE (AUTONOMOUS) Chadalawada Nagar, Renigunta Road, Tirupati
ELECTRONIC DEVICES AND CIRCUITS LABORATORY MANUAL Subject Code : 17CA04305 Regulations : R17 Class : III Semester (ECE) CHADALAWADA RAMANAMMA ENGINEERING COLLEGE (AUTONOMOUS) Chadalawada Nagar, Renigunta
More informationDifference between BJTs and FETs. Junction Field Effect Transistors (JFET)
Difference between BJTs and FETs Transistors can be categorized according to their structure, and two of the more commonly known transistor structures, are the BJT and FET. The comparison between BJTs
More informationSUMMER 13 EXAMINATION Subject Code: Model Answer Page No: / N
Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given in the model answer scheme. 2) The model answer and the answer written by candidate
More informationEC6202- ELECTRONIC DEVICES AND CIRCUITS TWO MARK QUESTIONS AND ANSWERS UNIT- 1 PN JUNCTION DEVICES
EC6202- ELECTRONIC DEVICES AND CIRCUITS TWO MARK QUESTIONS AND ANSWERS UNIT- 1 PN JUNCTION DEVICES 1. What is an ideal diode? An ideal diode is one which offers zero resistance when forward biased and
More informationField Effect Transistors
Field Effect Transistors Purpose In this experiment we introduce field effect transistors (FETs). We will measure the output characteristics of a FET, and then construct a common-source amplifier stage,
More informationScheme I Sample. : Second : Basic. Electronics : 70. Marks. Time: 3 Hrs. 2] b) State any. e) State any. Figure Definition.
Program Name Program Code Semester Course Title Scheme I Sample Question Paper : Diploma in Electronics Program Group : DE/EJ/IE/IS/ET/EN/EX : Second : Basic Electronics : 70 22216 Time: 3 Hrs. Instructions:
More informationSIR PADAMPAT SINGHANIA UNIVERSITY
SIR PADAMPAT SINGHANIA UNIVERSITY SCHOOL OF ENGINEERING BHATEWAR-3360 ELECTRONIC DEVICES AND CIRCUITS LABORATORY MANUAL DEPARTMENT OF ELECTRONICS & COMMUNICATION ENGINEERING [[ Objective: ) P-N JUNCTION
More informationEmitter base bias. Collector base bias Active Forward Reverse Saturation forward Forward Cut off Reverse Reverse Inverse Reverse Forward
SEMICONDUCTOR PHYSICS-2 [Transistor, constructional characteristics, biasing of transistors, transistor configuration, transistor as an amplifier, transistor as a switch, transistor as an oscillator] Transistor
More informationQUESTION BANK EC6201 ELECTRONIC DEVICES UNIT I SEMICONDUCTOR DIODE PART A. It has two types. 1. Intrinsic semiconductor 2. Extrinsic semiconductor.
FATIMA MICHAEL COLLEGE OF ENGINEERING & TECHNOLOGY Senkottai Village, Madurai Sivagangai Main Road, Madurai - 625 020. [An ISO 9001:2008 Certified Institution] QUESTION BANK EC6201 ELECTRONIC DEVICES SEMESTER:
More informationChapter 8. Field Effect Transistor
Chapter 8. Field Effect Transistor Field Effect Transistor: The field effect transistor is a semiconductor device, which depends for its operation on the control of current by an electric field. There
More informationAnalog Electronics. Electronic Devices, 9th edition Thomas L. Floyd Pearson Education. Upper Saddle River, NJ, All rights reserved.
Analog Electronics BJT Structure The BJT has three regions called the emitter, base, and collector. Between the regions are junctions as indicated. The base is a thin lightly doped region compared to the
More informationElectronic Devices 1. Current flowing in each of the following circuits A and respectively are: (Circuit 1) (Circuit 2) 1) 1A, 2A 2) 2A, 1A 3) 4A, 2A 4) 2A, 4A 2. Among the following one statement is not
More information(A) im (B) im (C)0.5 im (D) im.
Dr. Mahalingam College of Engineering and Technology, Pollachi. (An Autonomous Institution affiliated to Anna University) Regulation 2014 Fourth Semester Electrical and Electronics Engineering 141EE0404
More informationTable of Contents. iii
Table of Contents Subject Page Experiment 1: Diode Characteristics... 1 Experiment 2: Rectifier Circuits... 7 Experiment 3: Clipping and Clamping Circuits 17 Experiment 4: The Zener Diode 25 Experiment
More information(a) BJT-OPERATING MODES & CONFIGURATIONS
(a) BJT-OPERATING MODES & CONFIGURATIONS 1. The leakage current I CBO flows in (a) The emitter, base and collector leads (b) The emitter and base leads. (c) The emitter and collector leads. (d) The base
More information4.2.2 Metal Oxide Semiconductor Field Effect Transistor (MOSFET)
4.2.2 Metal Oxide Semiconductor Field Effect Transistor (MOSFET) The Metal Oxide Semitonductor Field Effect Transistor (MOSFET) has two modes of operation, the depletion mode, and the enhancement mode.
More informationSEMICONDUCTOR ELECTRONICS: MATERIALS, DEVICES AND SIMPLE CIRCUITS. Class XII : PHYSICS WORKSHEET
SEMICONDUCT ELECTRONICS: MATERIALS, DEVICES AND SIMPLE CIRCUITS Class XII : PHYSICS WKSHEET 1. How is a n-p-n transistor represented symbolically? (1) 2. How does conductivity of a semiconductor change
More informationEach question is worth 2 points, except for problem 3, where each question is worth 5 points.
Name: Date: DEPARTMENT OF ELECTRICAL ENGINEERING AND COMPUTER SCIENCE MASSACHUSETTS INSTITUTE OF TECHNOLOGY CAMBRIDGE, MASSACHUSETTS 02139 Spring Term 2007 Quiz 1 6.101 Introductory Analog Electronics
More informationELECTRONIC DEVICES AND CIRCUITS
ELECTRONIC DEVICES AND CIRCUITS 1. At room temperature the current in an intrinsic semiconductor is due to A. holes B. electrons C. ions D. holes and electrons 2. Work function is the maximum energy required
More informationSRM INSTITUTE OF SCIENCE AND TECHNOLOGY (DEEMED UNIVERSITY)
SRM INSTITUTE OF SCIENCE AND TECHNOLOGY (DEEMED UNIVERSITY) QUESTION BANK I YEAR B.Tech (II Semester) ELECTRONIC DEVICES (COMMON FOR EC102, EE104, IC108, BM106) UNIT-I PART-A 1. What are intrinsic and
More informationVidyalankar F.Y. Diploma : Sem. II [CO/CD/CM/CW/IF] Basic Electronics V F V K. V K = 0.7 for Si = 0.3 for Ge
F.Y. Diploma : Sem. II [CO/CD/CM/CW/IF] Basic Electronics Time : 3 Hrs. Prelim Question Paper Solution Marks : 100 Q.1 Attempt any TEN of the following: [20] Q.1(a) Draw characteristics of PN junction
More informationVALLIAMMAI ENGINEERING COLLEGE
VALLIAMMAI ENGINEERING COLLEGE SRM NAGAR, KATTANKULATHUR 60320 DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING QUESTION BANK Academic Year: 2018 2019 Odd Semester Subject: EC8353 - ELECTRON DEVICES
More informationUnit/Standard Number. LEA Task # Alignment
1 Secondary Competency Task List 100 SAFETY 101 Demonstrate an understanding of State and School safety regulations. 102 Practice safety techniques for electronics work. 103 Demonstrate an understanding
More informationPAST EXAM PAPER & MEMO N3 ABOUT THE QUESTION PAPERS:
EKURHULENI TECH COLLEGE. No. 3 Mogale Square, Krugersdorp. Website: www. ekurhulenitech.co.za Email: info@ekurhulenitech.co.za TEL: 011 040 7343 CELL: 073 770 3028/060 715 4529 PAST EXAM PAPER & MEMO N3
More informationUNIT I - TRANSISTOR BIAS STABILITY
UNIT I - TRANSISTOR BIAS STABILITY OBJECTIVE On the completion of this unit the student will understand NEED OF BIASING CONCEPTS OF LOAD LINE Q-POINT AND ITS STABILIZATION AND COMPENSATION DIFFERENT TYPES
More informationBasic Electronics: Diodes and Transistors. October 14, 2005 ME 435
Basic Electronics: Diodes and Transistors Eşref Eşkinat E October 14, 2005 ME 435 Electric lectricity ity to Electronic lectronics Electric circuits are connections of conductive wires and other devices
More informationINSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad
INSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad -500 043 COMPUTER SCIENCE AND ENGINEERING TUTORIAL QUESTION BANK Course Name : ELECTRONIC DEVICES AND CIRCUITS Course Code : A30404
More information7. Bipolar Junction Transistor
41 7. Bipolar Junction Transistor 7.1. Objectives - To experimentally examine the principles of operation of bipolar junction transistor (BJT); - To measure basic characteristics of n-p-n silicon transistor
More informationII/IV B. TECH. DEGREE EXAMINATIONS, NOVEMBER Second Semester EC/EE ELECTRONIC CIRCUIT ANALYSIS. Time : Three Hours Max.
Total No. of Questions : 9] [Total No. of Pages : 02 B.Tech. II/ IV YEAR DEGREE EXAMINATION, APRIL/MAY - 2014 (Second Semester) EC/EE/EI Electronic Circuit Analysis Time : 03 Hours Maximum Marks : 70 Q1)
More informationANALOG FUNDAMENTALS C. Topic 4 BASIC FET AMPLIFIER CONFIGURATIONS
AV18-AFC ANALOG FUNDAMENTALS C Topic 4 BASIC FET AMPLIFIER CONFIGURATIONS 1 ANALOG FUNDAMENTALS C AV18-AFC Overview This topic identifies the basic FET amplifier configurations and their principles of
More informationGUJARAT TECHNOLOGICAL UNIVERSITY BE - SEMESTER III EXAMINATION SUMMER 2013
Seat No.: Enrolment No. GUJARAT TECHNOLOGICAL UNIVERSITY BE - SEMESTER III EXAMINATION SUMMER 2013 Subject Code: 131101 Date: 31-05-2013 Subject Name: Basic Electronics Time: 02.30 pm - 05.00 pm Total
More informationSemiconductors, ICs and Digital Fundamentals
Semiconductors, ICs and Digital Fundamentals The Diode The semiconductor phenomena. Diode performance with ac and dc currents. Diode types: General purpose LED Zener The Diode The semiconductor phenomena
More informationElectrical, Electronic and Communications Engineering Technology/Technician CIP Task Grid
Secondary Task List 100 SAFETY 101 Describe OSHA safety regulations. 102 Identify, select, and demonstrate proper hand tool use for electronics work. 103 Recognize the types and usages of fire extinguishers.
More informationCENTURION UNIVERSITY OF TECHNOLOGY AND MANAGEMENT SCHOOL OF ENGINEERING & TECHNOLOGYDEPARTMENT OF ELECTRONICS & COMMUNICATION ENGINEERING
CENTURION UNIVERSITY OF TECHNOLOGY AND MANAGEMENT SCHOOL OF ENGINEERING & TECHNOLOGYDEPARTMENT OF ELECTRONICS & COMMUNICATION ENGINEERING ELECTRONIC DEVICES Section: ECE SEM: II PART-A 1. a) In a N-type
More informationSummer 2015 Examination
Summer 2015 Examination Subject Code: 17445 Model Answer Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given in the model answer scheme.
More informationNEW HORIZON PRE UNIVERSITY COLLEGE LESSON PLAN FOR THE ACADEMIC YEAR Department of ELECTRONICS
NEW HORIZON PRE UNIVERSITY COLLEGE LESSON PLAN FOR THE ACADEMIC YEAR 2017 2018 Department of ELECTRONICS I PUC Month: JUNE I 1. INTRODUCTION TO ELECTRONICS Electronics and its scope: Development of vacuum
More informationELECTRICITY AND ELECTRONICS
ELECTRICITY AND ELECTRONICS (Maximum Marks: 100) (Time allowed: Three hours) (Candidates are allowed additional 15 minutes for only reading the paper. They must NOT start writing during this time.) Answer
More informationHIGH LOW Astable multivibrators HIGH LOW 1:1
1. Multivibrators A multivibrator circuit oscillates between a HIGH state and a LOW state producing a continuous output. Astable multivibrators generally have an even 50% duty cycle, that is that 50% of
More informationUNIT 3 Transistors JFET
UNIT 3 Transistors JFET Mosfet Definition of BJT A bipolar junction transistor is a three terminal semiconductor device consisting of two p-n junctions which is able to amplify or magnify a signal. It
More informationChapter 6. FM Circuits
Chapter 6 FM Circuits Topics Covered 6-1: Frequency Modulators 6-2: Frequency Demodulators Objectives You should be able to: Explain the operation of an FM modulators and demodulators. Compare and contrast;
More informationBJT. Bipolar Junction Transistor BJT BJT 11/6/2018. Dr. Satish Chandra, Assistant Professor, P P N College, Kanpur 1
BJT Bipolar Junction Transistor Satish Chandra Assistant Professor Department of Physics P P N College, Kanpur www.satish0402.weebly.com The Bipolar Junction Transistor is a semiconductor device which
More informationELECTRONIC DEVICES AND CIRCUITS 2 Mark Questions Solved UNIT 1
ELECTRONIC DEVICES AND CIRCUITS 2 Mark Questions Solved UNIT 1 1. What is an ideal diode? An ideal diode is one which offers zero resistance when forward biased and infinite resistance when reverse biased.
More informationFET Channel. - simplified representation of three terminal device called a field effect transistor (FET)
FET Channel - simplified representation of three terminal device called a field effect transistor (FET) - overall horizontal shape - current levels off as voltage increases - two regions of operation 1.
More informationQUESTION BANK SUBJECT: ELECTRONIC DEVICES AND CIRCUITS
QUESTION BANK SUBJECT: ELECTRONIC DEVICES AND CIRCUITS UNIT-I PN JUNCTION DIODE 1. Derive an expression for total diode current starting from Boltzmann relationship in terms of the applied voltage. Nov
More informationPartIIILectures. Multistage Amplifiers
University of missan Electronic II, Second year 2015-2016 PartIIILectures Assistant Lecture: 1 Multistage and Compound Amplifiers Basic Definitions: 1- Gain of Multistage Amplifier: Fig.(1-1) A general
More informationUNIT I Introduction to DC & AC circuits
SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (DESCRIPTIVE) Subject with Code: Basic Electrical and Electronics Engineering (16EE207) Year & Sem: II-B.
More informationExamples to Power Supply
Examples to Power Supply Example-1: A center-tapped full-wave rectifier connected to a transformer whose each secondary coil has a r.m.s. voltage of 1 V. Assume the internal resistances of the diode and
More informationDocument Name: Electronic Circuits Lab. Facebook: Twitter:
Document Name: Electronic Circuits Lab www.vidyathiplus.in Facebook: www.facebook.com/vidyarthiplus Twitter: www.twitter.com/vidyarthiplus Copyright 2011-2015 Vidyarthiplus.in (VP Group) Page 1 CIRCUIT
More informationELC224 Final Review (12/10/2009) Name:
ELC224 Final Review (12/10/2009) Name: Select the correct answer to the problems 1 through 20. 1. A common-emitter amplifier that uses direct coupling is an example of a dc amplifier. 2. The frequency
More informationClass XII - Physics Semiconductor Electronics. Chapter-wise Problems
lass X - Physics Semiconductor Electronics Materials, Device and Simple ircuit hapter-wise Problems Multiple hoice Question :- 14.1 The conductivity of a semiconductor increases with increase in temperature
More informationWINTER 14 EXAMINATION
Subject Code:173 WINTER 14 EXAMINATION Model Answer Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given in the model answer scheme. 2) The
More informationObjective: To study and verify the functionality of a) PN junction diode in forward bias. Sl.No. Name Quantity Name Quantity 1 Diode
Experiment No: 1 Diode Characteristics Objective: To study and verify the functionality of a) PN junction diode in forward bias Components/ Equipments Required: b) Point-Contact diode in reverse bias Components
More informationField Effect Transistors (npn)
Field Effect Transistors (npn) gate drain source FET 3 terminal device channel e - current from source to drain controlled by the electric field generated by the gate base collector emitter BJT 3 terminal
More informationPhy 335, Unit 4 Transistors and transistor circuits (part one)
Mini-lecture topics (multiple lectures): Phy 335, Unit 4 Transistors and transistor circuits (part one) p-n junctions re-visited How does a bipolar transistor works; analogy with a valve Basic circuit
More informationShankersinh Vaghela Bapu Institute of Technology
Shankersinh Vaghela Bapu Institute of Technology B.E. Semester III (EC) 131101: Basic Electronics INDEX Sr. No. Title Page Date Sign Grade 1 [A] To Study the V-I characteristic of PN junction diode. [B]
More informationF.Y. Diploma : Sem. II [DE/EJ/IE/IS/EE/MU/ET/EN/EX] Basic Electronics
F.Y. Diploma : Sem. II [DE/EJ/IE/IS/EE/MU/ET/EN/EX] Basic Electronics Time: 3 Hrs.] Prelim Question Paper Solution [Marks : 70 Q.1 Attempt any FIE of the following : [10] Q.1(a) Draw the symbols for (i)
More informationChapter 3 SPECIAL PURPOSE DIODE
Chapter 3 SPECIAL PURPOSE DIODE 1 Inventor of Zener Diode Clarence Melvin Zener was a professor at Carnegie Mellon University in the department of Physics. He developed the Zener Diode in 1950 and employed
More informationUNIT I PN JUNCTION DEVICES
UNIT I PN JUNCTION DEVICES 1. Define Semiconductor. 2. Classify Semiconductors. 3. Define Hole Current. 4. Define Knee voltage of a Diode. 5. What is Peak Inverse Voltage? 6. Define Depletion Region in
More informationCapacitors, diodes, transistors
Capacitors, diodes, transistors capacitors charging and time response filters (impedance) semi-conductor diodes rectifiers transformers transistors CHM6158C - Lecture 3 1 Capacitors Symbol 2 Capacitors
More informationDE52/DC52 FUNDAMENTALS OF ELECTRICAL & ELECT ENGG DEC 2014
Q.2 a. Derive an expression for the current flowing at any instant during the discharge of a capacitor C across a resistor R. b. The coil of a moving coil instrument is wound with 50 turns of wire. The
More informationSYED AMMAL ENGINEERING COLLEGE
SYED AMMAL ENGINEERING COLLEGE (Approved by the AICTE, New Delhi, Govt. of Tamilnadu and Affiliated to Anna University, Chennai) Established in 1998 - An ISO 9001:2008 Certified Institution Dr. E.M.Abdullah
More information