SGM % Efficient Synchronous Step-Up Converter with 1.1A Switch

Size: px
Start display at page:

Download "SGM % Efficient Synchronous Step-Up Converter with 1.1A Switch"

Transcription

1 GERAL DESCRIPTION The SGM0 is a constant frequency, current mode, synchronous step-up switching regulator. Its output currents can go as high as 7mA while using a single-cell alkaline, and discharge it down to 0.9V. It can also be used for generating V at 00mA from a.v rail or a Li-Ion battery. High switching frequency minimizes the sizes of inductor and capacitor. Integrated power MOSFETs and internal compensation make the SGM0 simple to use and fit the total solution into a compact space. For light load current, the SGM0 enters into the power-save mode to maintain high efficiency. Anti-ringing control circuitry reduces EMI concerns by damping the inductor in discontinuous mode. The SGM0 provides true output disconnect and this allows to go to zero volt during shutdown without drawing any current from the input source. The output voltage of SGM0-ADJ can be programmed by an external resistor divider, and those of SGM0-./SGM0-.0 are fixed internally on the chip. The device is available in SOT-- package. It operates over an ambient temperature range of -0 to +8. FEATURES Boost Converter Device Quiescent Current: 0µA (TYP) Less than μa Shutdown Current Input Voltage Range: 0.9V to.v.v and.0v Fixed Output Voltages Adjustable Output Voltage Up to.v Output Voltage Clamping: V Power-Save Mode for Improved Efficiency at Low Output Power Load Disconnect During Shutdown Over-Temperature Protection Available in Green SOT-- Package -0 to +8 Operating Temperature Range APPLICATIONS Single-Cell Li Battery Powered Products Portable Audio Players Cellular Phones Personal Medical Products TYPICAL APPLICATION Power Supply C L.7μH SGM0 FB R R C Output voltage can be adjusted Figure. Typical Application Circuit REV. A.

2 PACKAGE/ORDERING INFORMATION MODEL SGM0 (V) PACKAGE DESCRIPTION SPECIFIED TEMPERATURE RANGE ORDERING NUMBER PACKAGE MARKING PACKING OPTION Adjustable SOT-- -0 to +8 SGM0-ADJYNG/TR SC8XX Tape and Reel, 000. SOT-- -0 to +8 SGM0-.YNG/TR SC9XX Tape and Reel, 000 NOTE: XX = Date Code..0 SOT-- -0 to +8 SGM0-.0YNG/TR SCAXX Tape and Reel, 000 Green (RoHS & HSF): defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If you have additional comments or questions, please contact your SGMICRO representative directly. MARKING INFORMATION SYY X X Date code - Month ("A" = Jan. "B" = Feb. "L" = Dec.) Date code - Year ("A" = 00, "B" = 0 ) Chip I.D. For example: SC8CA (0, January) ABSOLUTE MAXIMUM RATINGS Input Voltage Range on,,, FB, V to V Package Thermal Resistance SOT--, θ JA... 0 /W Junction Temperature Storage Temperature Range... - to +0 Lead Temperature (Soldering, 0s) ESD Susceptibility HBM V MM... 0V RECOMMDED OPERATING CONDITIONS Operating Temperature Range to +8 OVERSTRESS CAUTION Stresses beyond those listed may cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational section of the specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. ESD SSITIVITY CAUTION This integrated circuit can be damaged by ESD if you don t pay attention to ESD protection. SGMICRO recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. DISCLAIMER reserves the right to make any change in circuit design, specification or other related things if necessary without notice at any time.

3 PIN CONFIGURATION (TOP VIEW) NC/FB SOT-- PIN DESCRIPTION PIN NAME FUNCTION Boost and Rectifying Switch Input. Ground. Enable Input. (/ enabled, 0/ disabled) NC FB No Connect. It should be left floating. (SGM0-./SGM0-.0) Output Voltage Feedback Pin. Voltage feedback for programming the output voltage. (SGM0-ADJ) Boost Converter Output. Boost Converter Supply Voltage.

4 ELECTRICAL CHARACTERISTICS (Full = -0 to +8, typical values are at T A = +, unless otherwise noted.) DC/DC STAGE PARAMETER SYMBOL CONDITIONS TEMP MIN TYP MAX UNITS Output Voltage Range Full.. V Minimum Input Voltage Range for Start-Up V IN R L =.kω Full 0.9. R L = 70Ω Full.. Input Voltage Range after Start-Up V IN Feedback Voltage V FB Full mv Oscillator Frequency f Full khz Switch Current Limit I Full A Start-Up Current Limit + 00 ma Boost Switch-On Resistance =.V + 80 mω Rectifying Switch-On Resistance =.V + 00 mω Output Voltage Accuracy V CC =.V, I O = 0mA Full.8 % Line Regulation V CC = 0.9V to - 0.V, I O = 0mA Full 0. % Load Regulation + 0. % Quiescent Current V CC V = V CC =.V, I O = 0mA Full 0. µa =.V + 0 = V + Shutdown Current V = 0V, V CC =.V + µa CONTROL STAGE V µa 0.9V V CC.8V Full 0. V CC Input Low Voltage V IL.8V < V CC.V Full 0..V < V CC.V Full 0. V.V < V CC.0V Full 0. Input High Voltage V IH 0.9V V CC.8V Full 0.8 V CC.8V < V CC.V Full V.V < V CC.V Full..V < V CC.0V Full. Input Current Clamped on or Full µa Over-Temperature Protection 0 Over-Temperature Hysteresis 0

5 TYPICAL PERFORMANCE CHARACTERISTICS I O = 0mA Efficiency vs. Input Voltage I O = 0mA Efficiency vs. Input Voltage Efficiency (%) I O = 00mA I O = ma Efficiency (%) I O = ma I O = 0mA 0 =.V Input Voltage (V) 0 =.0V Input Voltage (V).0 Output Voltage vs. Output Current Output Voltage vs. Output Current..0 V CC =.V =.V.0. V CC =.V =.0V Output Voltage (V)...8. Output Voltage (V) Output Current (ma) Output Current (ma) 000 Quiescent Current vs. Input Voltage 800 Maximum Output Current vs. Input Voltage Quiescent Current (μa) 00 = V =.V Input Voltage (V). Maximum Output Current (ma) =.V 00 =.V =.V =.0V Input Voltage (V)

6 TYPICAL PERFORMANCE CHARACTERISTICS (continued) Line Transient Response Line Transient Response V IN VIN =.8V to.v, RL = Ω, =.V 00mV/div 00mV/div V IN VIN = V to.v, RL = Ω, = V 00mV/div 00mV/div Time (ms/div) Time (ms/div) Load Transient Response Load Transient Response I OUT 0mA/div 0mV/div I OUT 0mA/div 0mV/div VIN =.V, IL = 0mA to 80mA, =.V VIN =.V, IL = 0mA to 80mA, = V Time (ms/div) Time (ms/div) Output Voltage in Continuous Mode Output Voltage in Continuous Mode I L 0mV/div 00mA/div I L 0mV/div 00mA/div VIN =.V, RL = Ω, =.V VIN =.V, RL = Ω, = V Time (μs/div) Time (μs/div)

7 TYPICAL PERFORMANCE CHARACTERISTICS (continued) Output Voltage in Discontinuous Mode Output Voltage in Power-Save Mode I L 0mV/div 0mA/div 0mV/div 0mA/div VIN =.V, RL =.kω, =.V I L VIN =.V, RL =.kω, =.0V Time (00ns/div) Time (0μs/div) Start-Up after Enable Start-Up after Enable I L VIN =.V, RL = Ω, =.V V/div V/div V/div 00mA/div I L VIN =.V, RL = 0Ω, = V V/div V/div V/div 00mA/div Time (00μs/div) Time (00μs/div) 00 Efficiency vs. Output Current 00 Efficiency vs. Output Current Efficiency (%) 80 0 V CC =.V V CC = 0.9V 0 V CC =.8 V 0 =.V Output Current (ma) Efficiency (%) 80 V CC =.8V 0 V CC =.V V CC = 0.9V 0 0 =.V Output Current (ma) 7

8 TYPICAL PERFORMANCE CHARACTERISTICS (continued) 00 Efficiency vs. Output Current Efficiency (%) 80 V CC =.V 0 V CC =.8V 0 V CC =.V 0 = V Output Current (ma) 8

9 TYPICAL APPLICATION CIRCUITS Power Supply C.7μF L.7μH SGM0 FB R R C V CC Boost Output Figure. Power Supply Solution for Maximum Output Power Operating from a Single or Dual Alkaline Cell Power Supply C.7μF L.7μH SGM0 FB R R C V CC Boost Output Figure. Power Supply Solution Having Small Total Solution Size Power Supply C.7μF L.7μH SGM0 FB C D LED Current Up to 0mA R Figure. Power Supply Solution for Powering White LEDs in Lighting Applications 9

10 TYPICAL APPLICATION CIRCUITS (continued) C 0.µF DS V CC ~ V CC Unregulated Auxiliary Output C µf Power Supply C.7μF L.7μH SGM0 FB R R C V CC Boost Output Figure. Power Supply Solution with Auxiliary Positive Output Voltage C 0.µF DS C µf V CC ~ -V CC Unregulated Auxiliary Output Power Supply C.7μF L.7μH SGM0 FB R R C V CC Boost Output Figure. Power Supply Solution with Auxiliary Negative Output Voltage 0

11 TYPICAL APPLICATION CIRCUITS (continued) Power Supply C L.7μH SGM0-. NC C.V Figure 7a. Basic Application Circuit for the Fixed Output Versions Power Supply C L.7μH SGM0-.0 NC C.0V Figure 7b. Basic Application Circuit for the Fixed Output Versions

12 APPLICATION INFORMATION Design Procedure The SGM0 DC/DC converter is intended for systems powered by a single-cell, up to triple-cell alkaline, NiCd, and NiMH battery with a typical terminal voltage between 0.9V and.v. It can also be used in systems powered by one-cell Li-Ion or Li-Polymer with a typical voltage between.v and.v. Programming Output Voltage In Figure, the output voltage of the SGM0 DC/DC converter can be adjusted with an external resistor divider. The typical value of the voltage at the FB pin is 00mV. The maximum recommended value for the output voltage is.v. R and R are calculated using Equation : V V R = R ( OUT )= R ( OUT ) () V 00mV FB R is recommended to be 00kΩ. For example, if an output voltage of.v is needed, a 0kΩ resistor should be chosen for R. Inductor Selection A boost converter normally requires two main passive components for storing energy during the conversion. A boost inductor and a storage capacitor at the output are required. To select the boost inductor, it is recommended to keep the possible peak inductor current below the current limit threshold of the power switch in the chosen configuration. The highest peak current through the inductor and the switch depends on the output load, the input (V CC ), and the output voltage ( ). Estimation of the maximum average inductor current is done using Equation : I L = I O V 0.8 CC () The second parameter for choosing the inductor is the desired current ripple in the inductor. Normally, it is advisable to work with a ripple of less than 0% of the average inductor current. A smaller ripple reduces the magnetic hysteresis losses in the inductor, as well as output voltage ripple and EMI. But in the same way, regulation time rises at load changes. In addition, a larger inductor increases the total system costs. With these parameters, it is possible to calculate the value for the inductor by using Equation : L = ( V ΔI f V L OUT Parameter f is the switching frequency and ΔI L is the ripple current in the inductor. In typical applications, a.7µh inductance is recommended. The device has been optimized to operate with inductance values between.µh and 0µH. Nevertheless, operation with higher inductance values may be possible in some applications. Detailed stability analysis is then recommended. Care must be taken because load transients and losses in the circuit can lead to higher currents as estimated in Equation. Also, the losses in the inductor which include magnetic hysteresis losses and copper losses are a major parameter for total circuit efficiency. Input Capacitor At least a 0µF input capacitor is recommended to improve transient behavior of the regulator and EMI behavior of the total power supply circuit. A ceramic capacitor or a tantalum capacitor with a 00nF ceramic capacitor in parallel, placed close to the IC, is recommended. CC ) () For example, for an output current of 7mA at.v, at least an average current of 0mA flows through the inductor at a minimum input voltage of 0.9V.

13 APPLICATION INFORMATION (continued) Output Capacitor The major parameter necessary to define the output capacitor is the maximum allowed output voltage ripple of the converter. This ripple is determined by two parameters of the capacitor, the capacitance and the ESR. It is possible to calculate the minimum capacitance needed for the defined ripple, supposing that the ESR is zero, by using Equation : C MIN = IO ( V f ΔV V OUT Parameter f is the switching frequency and ΔV is the maximum allowed ripple. With a chosen ripple voltage of 0mV, a minimum capacitance of.µf is needed. In this value range, ceramic capacitors are a good choice. The ESR and the additional ripple created are negligible. It is calculated using Equation : CC ) () ΔV ESR = I O R ESR () The total ripple is the sum of the ripple caused by the capacitance and the ripple caused by the ESR of the capacitor. Additional ripple is caused by load transients. This means that the output capacitor has to completely supply the load during the charging phase of the inductor. The value of the output capacitance depends on the speed of the load transients and the load current during the load change. With the calculated minimum value of.µf and load transient considerations, the recommended output capacitance value is in the range of.7μf to µf. Care must be taken on capacitance loss caused by derating due to the applied DC voltage and the frequency characteristic of the capacitor. For example, larger form factor capacitors (in 0 size) have their self resonant frequencies in the same frequency range as the SGM0 operating frequency. So the effective capacitance of the capacitors used may be significantly lower. Therefore, the recommendation is to use smaller capacitors in parallel instead of one larger capacitor. Layout Considerations As for all switching power supplies, the layout is an important step in the design, especially at high-peak currents and high switching frequencies. If the layout is not carefully done, the regulator could show stability problems as well as EMI problems. Therefore, use wide and short traces for the main current path and for the power ground tracks. The input capacitor, output capacitor, and the inductor should be placed as close as possible to the IC. Use a common ground node for power ground and a different one for control ground to minimize the effects of ground noise. Connect these ground nodes at any place close to the ground pin of the IC. The feedback divider should be placed as close as possible to the ground pin of the IC. To lay out the control ground, it is recommended to use short traces as well, separated from the power ground traces. This avoids ground shift problems, which can occur due to superimposition of power ground current and control ground current. Thermal Information Implementation of integrated circuits in low-profile and fine-pitch surface-mount packages typically requires special attention to power dissipation. Many system-dependent issues such as thermal coupling, airflow, added heat sinks and convection surfaces, and the presence of other heat-generating components affect the power-dissipation limits of a given component. Three basic approaches for enhancing thermal performance follow.. Improving the power dissipation capability of the PCB design.. Improving the thermal coupling of the component to the PCB.. Introducing airflow in the system.

14 REVISION HISTORY NOTE: Page numbers for previous revisions may differ from page numbers in the current version. REV.A. to REV.A. Update the Typical Performance Characteristics Efficiency vs. Input Voltage ( =.V, =.0V)... APRIL 0 REV.A. to REV.A. Update the Electrical Characteristics V IH (0.9V V CC.8V).V - 0.8V CC... JANUARY 0 REV.A to REV.A. Update the Electrical Characteristics Switch Current Limit... Add dot on pin SOT--..., Changes from Original (JANUARY 0) to REV.A Changed from product preview to production data... All

15 PACKAGE INFORMATION PACKAGE OUTLINE DIMSIONS SOT-- D e e E E b RECOMMDED LAND PATTERN (Unit: mm) L A A A θ 0. c Symbol Dimensions In Millimeters Dimensions In Inches MIN MAX MIN MAX A A A b c D E E e 0.90 BSC 0.07 BSC e.900 BSC 0.07 BSC L θ TX

16 PACKAGE INFORMATION TAPE AND REEL INFORMATION REEL DIMSIONS TAPE DIMSIONS P P0 W Q Q Q Q Q Q B0 Q Q Q Q Q Q Reel Diameter P A0 K0 Reel Width (W) DIRECTION OF FEED NOTE: The picture is only for reference. Please make the object as the standard. KEY PARAMETER LIST OF TAPE AND REEL Package Type Reel Diameter Reel Width W A0 B0 K0 P0 P P W Pin Quadrant SOT Q DD000 TX

17 PACKAGE INFORMATION CARTON BOX DIMSIONS NOTE: The picture is only for reference. Please make the object as the standard. KEY PARAMETER LIST OF CARTON BOX Reel Type Length Width Height Pizza/Carton 7 (Option) DD000 TX

SGM % Efficient Synchronous Step-Up Converter with 1.1A Switch

SGM % Efficient Synchronous Step-Up Converter with 1.1A Switch GERAL DESCRIPTION The SGM0 is a constant frequency, current mode, synchronous step-up switching regulator. It can be used for generating V at 00mA from a.v rail or a Li-Ion battery. High switching frequency

More information

SGM % Efficient Synchronous Step-Up Converter with 1A Switch

SGM % Efficient Synchronous Step-Up Converter with 1A Switch Preliminary Datasheet SGM0 GERAL DESCRIPTION The SGM0 is a constant frequency, current mode, synchronous, step-up switching regulator. Its output currents can go as high as 7mA while using a single-cell

More information

DIO6305 High-Efficiency 1.2MHz, 1.1A Synchronous Step-Up Converter

DIO6305 High-Efficiency 1.2MHz, 1.1A Synchronous Step-Up Converter High-Efficiency 1.2MHz, 1.1A Synchronous Step-Up Converter Rev 1.2 Features High-Efficiency Synchronous-Mode 2.7-5.25V input voltage range Device Quiescent Current: 30µA (TYP) Less than 1µA Shutdown Current

More information

DIO6605B 5V Output, High-Efficiency 1.2MHz, Synchronous Step-Up Converter

DIO6605B 5V Output, High-Efficiency 1.2MHz, Synchronous Step-Up Converter 5V Output, High-Efficiency 1.2MHz, Synchronous Step-Up Converter Rev 0.2 Features High-Efficiency Synchronous-Mode 2.7-4.5V input voltage range Device Quiescent Current: 30µA(TYP) Less than 1µA Shutdown

More information

SGM2576/SGM2576B Power Distribution Switches

SGM2576/SGM2576B Power Distribution Switches /B GENERAL DESCRIPTION The and B are integrated typically 100mΩ power switch for self-powered and bus-powered Universal Series Bus (USB) applications. The and B integrate programmable current limiting

More information

SGM V Step-Up LED Driver

SGM V Step-Up LED Driver GENERAL DESCRIPTION The SGM3725 is a versatile constant current LED driver with a high efficiency step-up converter architecture. Unique technology and high 1.35A current limit allow SGM3725 to drive up

More information

SGM3736 PWM Dimming, 38V Step-Up LED Driver

SGM3736 PWM Dimming, 38V Step-Up LED Driver GENERAL DESCRIPTION The SGM3736 is a versatile constant current LED driver with a high efficiency step-up converter architecture. The low-side power MOSFET is integrated in the device, significantly shrinking

More information

SGM mA, High Voltage Regulators

SGM mA, High Voltage Regulators Preliminary Datasheet SGM2203 GENERAL DESCRIPTION The SGM2203 series is a set of low power high voltage regulators implemented in CMOS technology which can provide 150mA output current. The device allows

More information

SGM2551A/SGM2551C Precision Adjustable Current Limited Power Distribution Switches

SGM2551A/SGM2551C Precision Adjustable Current Limited Power Distribution Switches / GENERAL DESCRIPTION The SGM2551A and power distribution switches are intended for applications where precision current limiting is required or heavy capacitive loads and short circuits are encountered

More information

SGM mA, Low Power, Low Dropout, RF Linear Regulators

SGM mA, Low Power, Low Dropout, RF Linear Regulators GENERAL DESCRIPTION The SGM236 series low-power, low-dropout, CMOS linear voltage regulators operate from a 1.6V to 5.5V input voltage and deliver up to 3mA output current. They are the perfect choice

More information

SGM mW Differential Input, Stereo Audio Power Amplifier

SGM mW Differential Input, Stereo Audio Power Amplifier SGM482 2mW Differential Input, GENERAL DESCRIPTION The SGM482 is a stereo audio power amplifier with differential inputs. Operating on a single 5V power supply, it delivers 2mW of continuous RMS power

More information

SGM9154 Single Channel, Video Filter Driver for HD (1080p)

SGM9154 Single Channel, Video Filter Driver for HD (1080p) PRODUCT DESCRIPTION The SGM9154 video filter is intended to replace passive LC filters and drivers with an integrated device. The 6th-order channel offers High Definition (HDp) filter. The SGM9154 may

More information

SGM2553/SGM2553D Precision Adjustable Current Limited Power Distribution Switches

SGM2553/SGM2553D Precision Adjustable Current Limited Power Distribution Switches /D GENERAL DESCRIPTION The and D power distribution switches are intended for applications where precision current limiting is required or heavy capacitive loads and short circuits are encountered and

More information

SGM6132 3A, 28.5V, 1.4MHz Step-Down Converter

SGM6132 3A, 28.5V, 1.4MHz Step-Down Converter GENERAL DESCRIPTION The SGM6132 is a current-mode step-down regulator with an internal power MOSFET. This device achieves 3A continuous output current over a wide input supply range from 4.5V to 28.5V

More information

SGM ns, Low-Power, 3V/5V, Rail-to-Rail Input Single-Supply Comparator

SGM ns, Low-Power, 3V/5V, Rail-to-Rail Input Single-Supply Comparator 150ns, Low-Power, 3V/5V, Rail-to-Rail GENERAL DESCRIPTION The is a single high-speed comparator optimized for systems powered from a 3V or 5V supply. The device features high-speed response, low-power

More information

SGM Channel PWM Dimming Charge Pump White LED Driver

SGM Channel PWM Dimming Charge Pump White LED Driver GENERAL DESCRIPTION The SGM3145 is a high performance white LED driver. It integrates current sources and automatic mode selection charge pump. The part maintains the high efficiency by utilizing a 1 /1.5

More information

SGM8631/2/3 6MHz, Rail-to-Rail I/O CMOS Operational Amplifiers

SGM8631/2/3 6MHz, Rail-to-Rail I/O CMOS Operational Amplifiers /2/3 6MHz, Rail-to-Rail I/O PRODUCT DESCRIPTION The (single), SGM8632 (dual) and SGM8633 (single with shutdown) are low noise, low voltage, and low power operational amplifiers that can be designed into

More information

SGM6232 2A, 38V, 1.4MHz Step-Down Converter

SGM6232 2A, 38V, 1.4MHz Step-Down Converter GENERAL DESCRIPTION The is a current-mode step-down regulator with an internal power MOSFET. This device achieves 2A continuous output current over a wide input supply range from 4.5V to 38V with excellent

More information

SGM8621/2/3/4 3MHz, Rail-to-Rail I/O CMOS Operational Amplifiers

SGM8621/2/3/4 3MHz, Rail-to-Rail I/O CMOS Operational Amplifiers SGM8621/2/3/4 3MHz, Rail-to-Rail I/O PRODUCT DESCRIPTION The SGM8621 (single), SGM8622 (dual), SGM8623 (single with shutdown) and SGM8624 (quad) are low noise, low voltage, and low power operational amplifiers,

More information

SGM8521/2/4 150kHz, 5.5μA, Rail-to-Rail I/O, CMOS Operational Amplifiers

SGM8521/2/4 150kHz, 5.5μA, Rail-to-Rail I/O, CMOS Operational Amplifiers //4 0kHz,.μA, Rail-to-Rail I/O, GENERAL DESCRIPTION The (single), SGM8 (dual) and SGM84 (quad) are low cost, rail-to-rail input and output voltage feedback amplifiers. They have a wide input common mode

More information

SGM6130 3A, 28.5V, 385kHz Step-Down Converter

SGM6130 3A, 28.5V, 385kHz Step-Down Converter GENERAL DESCRIPTION The SGM6130 is a current-mode step-down regulator with an internal power MOSFET. This device achieves 3A continuous output current over a wide input supply range from 4.5 to 28.5 with

More information

SGM mA Buck/Boost Charge Pump LED Driver

SGM mA Buck/Boost Charge Pump LED Driver GENERAL DESCRIPTION The SGM3140 is a current-regulated charge pump ideal for powering high brightness LEDs for camera flash applications. The charge pump can be set to regulate two current levels for Flash

More information

SGM9111 8MHz Rail-to-Rail Composite Video Driver with 6dB Gain

SGM9111 8MHz Rail-to-Rail Composite Video Driver with 6dB Gain SGM9111 8MHz Rail-to-Rail Composite GENERAL DESCRIPTION The SGM9111 is a single rail-to-rail -pole output reconstruction filter with a -3dB bandwidth of 8MHz and 3V/µs slew rate. Operating from single

More information

RT9296. Synchronous Boost Converter with LDO Controller. General Description. Features. Applications. Ordering Information RT9296(- )

RT9296. Synchronous Boost Converter with LDO Controller. General Description. Features. Applications. Ordering Information RT9296(- ) Synchronous Boost Converter with LDO ler General Description The is a synchronous boost converter, which is based on a fixed frequency pulse-width-modulation (PWM) controller using a synchronous rectifier

More information

SGM3127 White LED Driver with Low Dropout Current Source

SGM3127 White LED Driver with Low Dropout Current Source GENERAL DESCRIPTION The SGM3127 low-dropout bias supply for white LEDs is a high-performance alternative to the simple ballast resistors used in conventional white LED designs. It is optimized for low

More information

RT9276. Synchronous Boost Converter with Voltage Detector. General Description. Features. Applications. Ordering Information. Pin Configurations

RT9276. Synchronous Boost Converter with Voltage Detector. General Description. Features. Applications. Ordering Information. Pin Configurations RT976 Synchronous Boost Converter with Voltage Detector General Description The RT976 is a synchronous boost converter, which is based on a fixed frequency Pulse-Width-Modulation (PWM) controller using

More information

SGM3122 White LED Charge Pump Current Source with PWM Brightness Control

SGM3122 White LED Charge Pump Current Source with PWM Brightness Control GENERAL DESCRIPTION The SGM3122 is a charge pump with PWM brightness control for white LED supplies in LCD display backlight applications. The supply voltage ranges from 2.7V to 5.5V, it is ideally suited

More information

SGM Ω, Low Voltage Quad, SPDT Analog Switch

SGM Ω, Low Voltage Quad, SPDT Analog Switch GENERAL DESCRIPTION The SGM3699 is a quad, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch that is designed to operate from a single 1.8V to 4.35V power

More information

SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch

SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch GENERAL DESCRIPTION The SGM44599 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power

More information

SGM321/SGM358/SGM324 1MHz, 60μA, Rail-to-Rail I/O CMOS Operational Amplifiers

SGM321/SGM358/SGM324 1MHz, 60μA, Rail-to-Rail I/O CMOS Operational Amplifiers /SGM358/SGM324 1MHz, 60μA, Rail-to-Rail I/O CMOS Operational Amplifiers GENERAL DESCRIPTION The (single), SGM358 (dual) and SGM324 (quad) are low cost, rail-to-rail input and output voltage feedback amplifiers.

More information

SGM W Fully Differential Audio Power Amplifier

SGM W Fully Differential Audio Power Amplifier .3W Fully Differential GENERAL DESCRIPTION The SGM4895 is a fully differential audio power amplifier that is designed for portable communication device applications and demanding applications in mobile

More information

3110(A) SGM3110 MicroPower Regulated Charge Pump FEATURES GENERAL DESCRIPTION PIN CONFIGURATION (TOP VIEW) APPLICATIONS TYPICAL APPLICATION

3110(A) SGM3110 MicroPower Regulated Charge Pump FEATURES GENERAL DESCRIPTION PIN CONFIGURATION (TOP VIEW) APPLICATIONS TYPICAL APPLICATION GENERAL DESCRIPTION The SGM30 is a MicroPower switched capacitor voltage converter that delivers a regulated output. No external inductor is required for operation. The SGM30 can deliver up to 00mA to

More information

SGM ns, Low-Power, 3V/5V, Rail-to-Rail Input Single-Supply Comparator

SGM ns, Low-Power, 3V/5V, Rail-to-Rail Input Single-Supply Comparator 45ns, Low-Power, 3V/5V, Rail-to-Rail GENERAL DESCRIPTION The is a single high-speed comparator optimized for systems powered from a 3V or 5V supply. The device features high-speed response, low-power consumption,

More information

SGM8925/7 110kHz, 6.4μA, Rail-to-Rail Output CMOS Operational Amplifiers

SGM8925/7 110kHz, 6.4μA, Rail-to-Rail Output CMOS Operational Amplifiers PRODUCT DESCRIPTION The SGM8925 and SGM8927 are low power, low offset voltage and rail-to-rail output voltage feedback amplifiers. They have a wide output voltage swing, and take the minimum operating

More information

RT9041A/B. 500mA, Low Voltage, LDO Regulator with External Bias Supply. General Description. Features. Applications. Ordering Information

RT9041A/B. 500mA, Low Voltage, LDO Regulator with External Bias Supply. General Description. Features. Applications. Ordering Information RT9041A/B 500mA, Low Voltage, LDO Regulator with External Bias Supply General Description The RT9041A/B are low voltage, low dropout linear regulators with an external bias supply input. The bias supply

More information

SGM706 Low-Cost, Microprocessor Supervisory Circuit

SGM706 Low-Cost, Microprocessor Supervisory Circuit GENERAL DESCRIPTION The microprocessor supervisory circuit reduces the complexity and number of components required to monitor power supply and monitor microprocessor activity. It significantly improves

More information

Low Noise 300mA LDO Regulator General Description. Features

Low Noise 300mA LDO Regulator General Description. Features Low Noise 300mA LDO Regulator General Description The id9301 is a 300mA with fixed output voltage options ranging from 1.5V, low dropout and low noise linear regulator with high ripple rejection ratio

More information

RT9187C. 600mA, Ultra-Low Dropout, CMOS Regulator. General Description. Features. Applications. Ordering Information. Pin Configurations (TOP VIEW)

RT9187C. 600mA, Ultra-Low Dropout, CMOS Regulator. General Description. Features. Applications. Ordering Information. Pin Configurations (TOP VIEW) 600mA, Ultra-Low Dropout, CMOS Regulator General Description The is a high-performance, 600mA LDO regulator, offering extremely high PSRR and ultra-low dropout. This chip is ideal for portable RF and wireless

More information

RT9187B. 600mA, Ultra-Low Dropout, Ultra-Fast CMOS LDO Regulator. General Description. Features. Applications. Ordering Information RT9187B

RT9187B. 600mA, Ultra-Low Dropout, Ultra-Fast CMOS LDO Regulator. General Description. Features. Applications. Ordering Information RT9187B 6mA, Ultra-Low Dropout, Ultra-Fast CMOS LDO Regulator General Description The is a high-performance, 6mA LDO regulator, offering extremely high PSRR and ultra-low dropout. This chip is ideal for portable

More information

SGM mA Buck/Boost Charge Pump LED Driver

SGM mA Buck/Boost Charge Pump LED Driver GENERAL DESCRIPTION The SGM3140 is a current-regulated charge pump ideal for powering high brightness LEDs for camera flash applications. The charge pump can be set to regulate two current levels for FLASH

More information

RT V DC-DC Boost Converter. Features. General Description. Applications. Ordering Information. Marking Information

RT V DC-DC Boost Converter. Features. General Description. Applications. Ordering Information. Marking Information RT8580 36V DC-DC Boost Converter General Description The RT8580 is a high performance, low noise, DC-DC Boost Converter with an integrated 0.5A, 1Ω internal switch. The RT8580's input voltage ranges from

More information

SGM4064 Over-Voltage Protection IC and Li+ Charger Front-End Protection IC with LDO Mode

SGM4064 Over-Voltage Protection IC and Li+ Charger Front-End Protection IC with LDO Mode GENERAL DESCRIPTION The SGM4064 is a charger front-end integrated circuit designed to provide protection to Li-ion batteries from failures of the charging circuitry. The IC continuously monitors the input

More information

SGM8271/2/4 High Voltage Rail-to-Rail Output Operational Amplifiers

SGM8271/2/4 High Voltage Rail-to-Rail Output Operational Amplifiers GENERAL DESCRIPTION The SGM8271 (single), SGM8272 (dual) and SGM8274 (quad) are high voltage operational amplifiers that are designed to offer a wide input common mode voltage range and output voltage

More information

PS7516. Description. Features. Applications. Pin Assignments. Functional Pin Description

PS7516. Description. Features. Applications. Pin Assignments. Functional Pin Description Description The PS756 is a high efficiency, fixed frequency 550KHz, current mode PWM boost DC/DC converter which could operate battery such as input voltage down to.9.. The converter output voltage can

More information

RT mA Dual LDO Regulator. General Description. Features. Applications. Ordering Information. Pin Configurations (TOP VIEW) Marking Information

RT mA Dual LDO Regulator. General Description. Features. Applications. Ordering Information. Pin Configurations (TOP VIEW) Marking Information RT9055 300mA Dual LDO Regulator General Description The RT9055 is a dual channel, low noise, and low dropout regulator sourcing up to 300mA at each channel. The output voltage range is from 0.9V to 3.5V

More information

SGM mW, Capless, Stereo Headphone Amplifier with Shutdown

SGM mW, Capless, Stereo Headphone Amplifier with Shutdown 8mW, Capless, Stereo Headphone GENERAL DESCRIPTION The SGM497 stereo headphone amplifier is designed for portable equipment where board space is at a premium. The SGM497 uses capless architecture to produce

More information

RT9278. High Efficiency Boost LDO Converter & High Power White LED Driver. General Description. Features. Applications. Ordering Information

RT9278. High Efficiency Boost LDO Converter & High Power White LED Driver. General Description. Features. Applications. Ordering Information RT High Efficiency Boost LDO Converter & High Power White LED Driver General Description The RT is a compact, high efficiency, synchronous step-up converter, it provides a power supply solution for products

More information

SGM8140 Low Power, Vibration Sensor and PIR Sensor Analog Front End (AFE)

SGM8140 Low Power, Vibration Sensor and PIR Sensor Analog Front End (AFE) SGM814 PRODUCT DESCRIPTION The SGM814 is a PIR sensor and vibration sensor analog front end which consists of 2 independent building block circuits. One is a dual rail-to-rail input and output operational

More information

SGM3127 White LED Driver with Low Dropout Current Source

SGM3127 White LED Driver with Low Dropout Current Source GENERAL DESCRIPTION The SGM3127 low-dropout bias supply for white LEDs is a high-performance alternative to the simple ballast resistors used in conventional white LED designs. It is optimized for low

More information

id9309 Ultra-Low Noise Ultra-Fast 300mA LDO Regulator Features

id9309 Ultra-Low Noise Ultra-Fast 300mA LDO Regulator Features Ultra-Low Noise Ultra-Fast 300mA LDO Regulator General Description The id9309 is a 300mA, low dropout and low noise linear regulator with high ripple rejection ratio and fast turn-on time. It has fixed

More information

id id mA, Low Dropout, Low Noise Ultra-Fast With Soft Start CMOS LDO Regulator Features General Description Applications

id id mA, Low Dropout, Low Noise Ultra-Fast With Soft Start CMOS LDO Regulator Features General Description Applications 500mA, Low Dropout, Low Noise Ultra-Fast With Soft Start CMOS LDO Regulator General Description The is a 500mA, low dropout and low noise linear regulator with high ripple rejection ratio. It has fixed

More information

1.5MHz 600mA, Synchronous Step-Down Regulator. Features

1.5MHz 600mA, Synchronous Step-Down Regulator. Features 1.5MHz 600mA, Synchronous Step-Down Regulator General Description is designed with high efficiency step down DC/DC converter for portable devices applications. It features with extreme low quiescent current

More information

RT CH Power Management IC. General Description. Features. Applications. Pin Configurations

RT CH Power Management IC. General Description. Features. Applications. Pin Configurations 4+1 CH Power Management IC General Description The RT9953 is a complete power supply solution for digital still cameras and other handheld devices. The RT9953 is a multi-ch power management IC including

More information

SGM89000 Capless 2Vrms Line Driver with Adjustable Gain

SGM89000 Capless 2Vrms Line Driver with Adjustable Gain GENERAL DESCRIPTION The SGM89000 is a 2Vrms pop/click-free stereo line driver designed to allow the removal of the output DC-blocking capacitors for reduced component count and cost. The device is ideal

More information

RT9041F. 500mA, Low Voltage, LDO Regulator with External Bias Supply. General Description. Features. Applications. Ordering Information

RT9041F. 500mA, Low Voltage, LDO Regulator with External Bias Supply. General Description. Features. Applications. Ordering Information 500mA, Low Voltage, LDO Regulator with External Bias Supply General Description The is a low voltage, low dropout linear regulator with an external bias supply input. The bias supply drives the gate of

More information

RT μA I Q, 250mA Low-Dropout Linear Regulator. General Description. Features

RT μA I Q, 250mA Low-Dropout Linear Regulator. General Description. Features RT9073 1μA I Q, 250mA Low-Dropout Linear Regulator General Description The RT9073 is a low-dropout (LDO) voltage regulators with enable function that operates from 1.2V to 5.5V. It provides up to 250mA

More information

SGM42507 DC Motor/Coil Driver

SGM42507 DC Motor/Coil Driver ADVANCED DATASHEET SGM4507 GENERAL DESCRIPTION SGM4507 is a bridge-tie driver designed for actuating motors and coils bi-directionally. It translates logic level input waves to power driving outputs to

More information

SGM8957-1/SGM V, Micro-Power CMOS Zero-Drift Operational Amplifiers

SGM8957-1/SGM V, Micro-Power CMOS Zero-Drift Operational Amplifiers /SGM8957-2 1.8V, Micro-Power CMOS PRODUCT DESCRIPTION The single and dual SGM8957-2 CMOS operational amplifiers provide very low offset voltage and zero-drift over time and temperature. The miniature,

More information

RT9041E. 500mA, Low Voltage, LDO Regulator with External Bias Supply. General Description. Features. Applications. Ordering Information RT9041E-

RT9041E. 500mA, Low Voltage, LDO Regulator with External Bias Supply. General Description. Features. Applications. Ordering Information RT9041E- RT9041E 500mA, Low Voltage, LDO Regulator with External Bias Supply General Description The RT9041E is a low voltage, low dropout linear regulator with an external bias supply input. The bias supply drives

More information

id8603 PFM Step-Up DC-DC Converters with Internal Schottky Diode General Description Applications Features Ordering Information Marking Information

id8603 PFM Step-Up DC-DC Converters with Internal Schottky Diode General Description Applications Features Ordering Information Marking Information PFM Step-Up DC-DC Converters with Internal Schottky Diode General Description The compact, high-efficiency, PFM step-up DC- DC converters are available in SOT-89-3,SOT-23-3 and SOT-23-5 packages. They

More information

RT μA I Q, 300mA Low-Dropout Linear Regulator. General Description. Features. Pin Configuration. Applications

RT μA I Q, 300mA Low-Dropout Linear Regulator. General Description. Features. Pin Configuration. Applications RT978 2μA I Q, 3mA Low-Dropout Linear Regulator General Description The RT978 is a low-dropout (LDO) voltage regulator with enable function that operates from 1.2V to 5.5V. It provides up to 3mA of output

More information

UM1660. Low Power DC/DC Boost Converter UM1660S SOT23-5 UM1660DA DFN AAG PHO. General Description

UM1660. Low Power DC/DC Boost Converter UM1660S SOT23-5 UM1660DA DFN AAG PHO. General Description General Description Low Power DC/DC Boost Converter S SOT23-5 DA DFN6 2.0 2.0 The is a PFM controlled step-up DC-DC converter with a switching frequency up to 1MHz. The device is ideal to generate output

More information

RT mA, Ultra-Low Noise, Ultra-Fast CMOS LDO Regulator. General Description. Features. Applications. Ordering Information. Marking Information

RT mA, Ultra-Low Noise, Ultra-Fast CMOS LDO Regulator. General Description. Features. Applications. Ordering Information. Marking Information 3mA, Ultra-Low Noise, Ultra-Fast CMOS LDO Regulator General Description The RT9193 is designed for portable RF and wireless applications with demanding performance and space requirements. The RT9193 performance

More information

RT2515A. 2A, Low Input Voltage, Ultra-Low Dropout Linear Regulator with Enable. General Description. Features. Applications

RT2515A. 2A, Low Input Voltage, Ultra-Low Dropout Linear Regulator with Enable. General Description. Features. Applications 2A, Low Input Voltage, Ultra-Low Dropout Linear Regulator with Enable General Description The is a high performance positive voltage regulator designed for use in applications requiring ultralow input

More information

EUP2511. HQI Boost Converter With 2.1A Switch In Tiny SOT-23 Package FEATURES DESCRIPTION APPLICATIONS. Typical Application Circuit

EUP2511. HQI Boost Converter With 2.1A Switch In Tiny SOT-23 Package FEATURES DESCRIPTION APPLICATIONS. Typical Application Circuit HQI Boost Converter With 2.1A Switch In Tiny SOT-23 Package DESCRIPTION The is a high performance current mode, PWM step-up converter. With an internal 2.1A, 150mΩ MOSFET, it can generate 5 at up to 900mA

More information

RT A, 2MHz, Synchronous Step-Down Converter. General Description. Features. Applications. Ordering Information. Pin Configurations

RT A, 2MHz, Synchronous Step-Down Converter. General Description. Features. Applications. Ordering Information. Pin Configurations 4A, 2MHz, Synchronous Step-Down Converter General Description The is a high efficiency synchronous, step-down DC/DC converter. Its input voltage range is from 2.7V to 5.5V and provides an adjustable regulated

More information

SGM MHz, 48μA, Rail-to-Rail I/O CMOS Operational Amplifier

SGM MHz, 48μA, Rail-to-Rail I/O CMOS Operational Amplifier PRODUCT DESCRIPTION The is a low cost, single rail-to-rail input and output voltage feedback amplifier. It has a wide input common mode voltage range and output voltage swing, and takes the minimum operating

More information

SGM4863 Dual 2.1W Audio Power Amplifier Plus Stereo Headphone Function

SGM4863 Dual 2.1W Audio Power Amplifier Plus Stereo Headphone Function Dual.W Audio Power Amplifier GENERAL DESCRIPTION The SGM4863 is a dual bridge-connected audio power amplifier which, when connected to a 5V supply, will deliver.w into a 4Ω load or.5w into a 3Ω load with

More information

SGM W Fully Differential Audio Power Amplifier with Selectable Shutdown

SGM W Fully Differential Audio Power Amplifier with Selectable Shutdown GENERAL DESCRIPTION The SGM4996 is a fully differential audio power amplifier that is designed for portable communication device applications and demanding applications in mobile phones. It is capable

More information

SGM3798 Audio Headset Analog Switch with Reduced GND Switch R ON and FM Capability

SGM3798 Audio Headset Analog Switch with Reduced GND Switch R ON and FM Capability GENERAL DESCRIPTION The is an audio headset analog switch that is used to detect 3.5mm accessories and switch SLEEVE and RING2 by external controller. The ground signal is routed through a pair of low-impedance

More information

SGM8631/2/3/4 470μA, 6MHz, Rail-to-Rail I/O CMOS Operational Amplifiers

SGM8631/2/3/4 470μA, 6MHz, Rail-to-Rail I/O CMOS Operational Amplifiers PRODUCT DESCRIPTION The SGM863 (single), SGM863 (dual), SGM8633 (single with shutdown) and SGM8634 (quad) are low noise, low voltage, and low power operational amplifiers, that can be designed into a wide

More information

RT A, Low Input Voltage, Ultra-Low Dropout LDO Regulator with Enable. Features. General Description. Applications. Ordering Information

RT A, Low Input Voltage, Ultra-Low Dropout LDO Regulator with Enable. Features. General Description. Applications. Ordering Information RT2516 2A, Low Input Voltage, Ultra-Low Dropout LDO Regulator with Enable General Description The RT2516 is a high performance positive voltage regulator designed for use in applications requiring ultra-low

More information

SGM W Audio Power Amplifier

SGM W Audio Power Amplifier GENERAL DESCRIPTION The SGM489 is a.2w, fully integrated, audio power amplifier. It is designed to maximize audio performance in portable applications such as mobile phone. The portable application requires

More information

600mA, 1.2MHz, Synchronous Step-Down DC-DC Converter UM3501 SOT23-5 UM3501DA DFN Features. Efficiency (%) C3 10uF

600mA, 1.2MHz, Synchronous Step-Down DC-DC Converter UM3501 SOT23-5 UM3501DA DFN Features. Efficiency (%) C3 10uF 600mA, 1.2MHz, Synchronous Step-Down DC-DC Converter UM3501 SOT23-5 UM3501DA DFN6 2.0 2.0 General Description UM3501 is a high-efficiency pulse-width-modulated (PWM) step-down DC-DC converter, capable

More information

RT9043- High PSRR, Low Dropout, 400mA Adjustable LDO Regulator. Features. General Description. Applications. Ordering Information. Pin Configurations

RT9043- High PSRR, Low Dropout, 400mA Adjustable LDO Regulator. Features. General Description. Applications. Ordering Information. Pin Configurations High PSRR, Low Dropout, 400mA Adjustable LDO Regulator General Description The RT9043 is a high-performance, 400mA LDO regulator, offering high PSRR and low dropout. The quiescent current is as low as

More information

1.5MHz 600mA, Synchronous Step-Down Regulator. Features

1.5MHz 600mA, Synchronous Step-Down Regulator. Features 1.5MHz 600mA, Synchronous Step-Down Regulator General Description is designed with high efficiency step down DC/DC converter for portable devices applications. It features with extreme low quiescent current

More information

RT2517B. 1A, 6V, Ultra-Low Dropout Linear Regulator. General Description. Features. Applications. Ordering Information. Marking Information

RT2517B. 1A, 6V, Ultra-Low Dropout Linear Regulator. General Description. Features. Applications. Ordering Information. Marking Information RT2517B 1A, 6V, Ultra-Low Dropout Linear Regulator General Description The RT2517B is a high performance positive voltage regulator designed for use in applications requiring ultralow input voltage and

More information

SGM48754 Quad SPST CMOS Analog Switch

SGM48754 Quad SPST CMOS Analog Switch GENERAL DESCRIPTION The is a CMOS analog switch configured as quad SPST. This CMOS device can operate from 2.5V to 5.5V single supplies. Each switch can handle rail-to-rail analog signals. The off-leakage

More information

RT mA, Low Input Voltage, Low Dropout, Low Noise Ultra- Fast Without Bypass Capacitor CMOS LDO Regulator. General Description.

RT mA, Low Input Voltage, Low Dropout, Low Noise Ultra- Fast Without Bypass Capacitor CMOS LDO Regulator. General Description. Applications CDMA/GSM Cellular Handsets Portable Information Appliances Laptop, Palmtops, Notebook Computers Hand-Held Instruments Mini PCI & PCI-Express Cards PCMCIA & New Cards RT9030 150mA, Low Input

More information

RT2517B. 1A, 6V, Ultra-Low Dropout Linear Regulator. Features. General Description. Applications. Ordering Information. Marking Information

RT2517B. 1A, 6V, Ultra-Low Dropout Linear Regulator. Features. General Description. Applications. Ordering Information. Marking Information Sample & Buy 1A, 6V, Ultra-Low Dropout Linear Regulator General Description The is a high performance positive voltage regulator designed for use in applications requiring ultralow input voltage and ultra-low

More information

1.5MHz 800mA, Synchronous Step-Down Regulator. Features. Applications. 2.2 uh. Cout 10uF CER. Cin 4.7 uf CER 2 GND FIG.1

1.5MHz 800mA, Synchronous Step-Down Regulator. Features. Applications. 2.2 uh. Cout 10uF CER. Cin 4.7 uf CER 2 GND FIG.1 1.5MHz 800mA, Synchronous Step-Down Regulator General Description is designed with high efficiency step down DC/DC converter for portable devices applications. It features with extreme low quiescent current

More information

SGM330A Quad, Wide-Bandwidth SPDT Video Analog Switch

SGM330A Quad, Wide-Bandwidth SPDT Video Analog Switch GENERAL DESCRIPTION The SGM330A is a quad, bidirectional, single-pole/ double-throw (SPDT) CMOS video analog switch (Mux/ DeMux) designed to operate from a single 2.7V to 5.5V power supply. This 2-channel

More information

Dual Channel, 1.5MHz 800mA, Synchronous Step-Down Regulator. Features. Applications

Dual Channel, 1.5MHz 800mA, Synchronous Step-Down Regulator. Features. Applications Dual Channel, 1.5MHz 800mA, Synchronous Step-Down Regulator General Description is designed with high efficiency step down DC/DC converter for portable devices applications. It features with extreme low

More information

AME. High Efficiency 500KHz Step-Up Converter AME5125. n General Description. n Features. n Function Diagram. n Applications. n Typical Application

AME. High Efficiency 500KHz Step-Up Converter AME5125. n General Description. n Features. n Function Diagram. n Applications. n Typical Application 5125 n General Description The 5125 is a high-performance current mode synchronous boost converter with integrated Power MOSFETs which on-resistance of internal main switch is only 50mΩ and rectifier switch

More information

FP V, 3.1A, 550KHz High Efficiency Low Ripple Synchronous Step-Up Converter. Description. Features. Applications.

FP V, 3.1A, 550KHz High Efficiency Low Ripple Synchronous Step-Up Converter. Description. Features. Applications. 5V, 3.1A, 550KHz High Efficiency Low Ripple Synchronous Step-Up Converter Description The is a high efficiency, fixed frequency 550KHz, current mode PWM boost DC/DC converter which could operate battery

More information

RT mA, 0.5% Accuracy Low Dropout, Ultra Low Noise Voltage Regulator. Features. General Description. Applications. Ordering Information

RT mA, 0.5% Accuracy Low Dropout, Ultra Low Noise Voltage Regulator. Features. General Description. Applications. Ordering Information 3mA,.5% Accuracy Low Dropout, Ultra Low Noise Voltage Regulator General Description The RT95 is a high-performance, 3mA LDO regulator, offering extremely high PSRR and ultra-low dropout. The RT95 is Ideal

More information

UM mA, 600kHz Step-Up DC-DC Converter UM3433 SOT23-6. General Description. Rev.05 Dec /9

UM mA, 600kHz Step-Up DC-DC Converter UM3433 SOT23-6. General Description.  Rev.05 Dec /9 General Description UM3433 600mA, 600kHz Step-Up DC-DC Converter UM3433 SOT23-6 The UM3433 is synchronous rectified, fixed frequency, step-up DC/DC converter series delivering high efficiency in a low

More information

RT6150A/B. Current Mode Buck-Boost Converter. General Description. Features. Ordering Information RT6150A/B- Applications

RT6150A/B. Current Mode Buck-Boost Converter. General Description. Features. Ordering Information RT6150A/B- Applications RT6150A/B Current Mode Buck-Boost Converter General Description The RT6150A/B is a high efficiency, fixed frequency, Buck- Boost DC/DC converter that operates from input voltages above, below or equal

More information

RT9285A/B. Tiny Package, High Performance, Diode Embedded White LED Driver. Preliminary. Features. General Description.

RT9285A/B. Tiny Package, High Performance, Diode Embedded White LED Driver. Preliminary. Features. General Description. General Description The RT9285 is a high frequency asynchronous boost converter with internal diode, which can support 2 to 5 White LEDs for backlighting and OLED power supply. The Internal soft start

More information

EUP MHz, 800mA Synchronous Step-Down Converter with Soft Start

EUP MHz, 800mA Synchronous Step-Down Converter with Soft Start 1.5MHz, 800mA Synchronous Step-Down Converter with Soft Start DESCRIPTION The is a constant frequency, current mode, PWM step-down converter. The device integrates a main switch and a synchronous rectifier

More information

RT4503/A. Asynchronous Boost Converter for 10 WLEDs. Features. General Description. Ordering Information. Applications. Simplified Application Circuit

RT4503/A. Asynchronous Boost Converter for 10 WLEDs. Features. General Description. Ordering Information. Applications. Simplified Application Circuit Asynchronous Boost Converter for 1 WLEDs General Description The is a highly integrated LED driver IC capable of driving 1 WLEDs in series. It is composed of a current mode Boost converter integrated with

More information

RT mA 3-Channel Pulse Dimming Current Source LED Driver. General Description. Features. Applications. Ordering Information. Pin Configurations

RT mA 3-Channel Pulse Dimming Current Source LED Driver. General Description. Features. Applications. Ordering Information. Pin Configurations 0mA -Channel Pulse Dimming Current Source LED Driver General Description The RT902 is a high performance constant current driver for white LED. It supports up to white LEDs and regulates a constant current

More information

RT A, 2MHz, Synchronous Step-Down Converter. Features. General Description. Applications. Ordering Information. Marking Information

RT A, 2MHz, Synchronous Step-Down Converter. Features. General Description. Applications. Ordering Information. Marking Information RT8064 2A, 2MHz, Synchronous Step-Down Converter General Description The RT8064 is a high efficiency synchronous, step-down DC/DC converter. Its input voltage range is from 2.7V to 5.5V and provides an

More information

SGM8706 Micro-Power, RRIO, 1.8V, Push-Pull Output Comparator with Integrated Voltage Reference GENERAL DESCRIPTION FEATURES APPLICATIONS

SGM8706 Micro-Power, RRIO, 1.8V, Push-Pull Output Comparator with Integrated Voltage Reference GENERAL DESCRIPTION FEATURES APPLICATIONS Micro-Power, RRIO, 1.V, Push-Pull Output GENERAL DESCRIPTION The is a low power comparator with a typical power supply current of 2.2µA. It features an uncommitted on-chip voltage reference, comparator

More information

RT2517A. 1A, 6V, Ultra Low Dropout Linear Regulator. General Description. Features. Applications. Ordering Information. Marking Information

RT2517A. 1A, 6V, Ultra Low Dropout Linear Regulator. General Description. Features. Applications. Ordering Information. Marking Information RT2517A 1A, 6V, Ultra Low Dropout Linear Regulator General Description The RT2517A is a high performance positive voltage regulator designed for applications requiring low input voltage and ultra low dropout

More information

SGM8701 Micro-Power, CMOS Input, RRIO, 1.4V, Push-Pull Output Comparator

SGM8701 Micro-Power, CMOS Input, RRIO, 1.4V, Push-Pull Output Comparator SGM871 GENERAL DESCRIPTION The SGM871 is an ultra low power comparator with a typical power supply current of 3nA. It has the best-in-class power supply current versus propagation delay performance. The

More information

SGM9119 Triple, 5th-Order, Standard Definition Video Filter Driver

SGM9119 Triple, 5th-Order, Standard Definition Video Filter Driver PRODUCT DESCRIPTION The SGM9119 is a low voltage, triple video amplifier with integrated reconstruction filters and input clamps. Specially suited for standard definition video signals, this device is

More information

SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch

SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch GENERAL DESCRIPTION The SGM44601 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power

More information

RT mA, Low Input Voltage, Low Dropout, Low Noise Ultra- Fast Without Bypass Capacitor CMOS LDO Regulator. General Description.

RT mA, Low Input Voltage, Low Dropout, Low Noise Ultra- Fast Without Bypass Capacitor CMOS LDO Regulator. General Description. RT9030 150mA, Low Input Voltage, Low Dropout, Low Noise Ultra- Fast Without Bypass Capacitor CMOS LDO Regulator General Description The RT9030 is a high-performance, 150mA LDO regulator, offering extremely

More information

SGM4809 Dual 158mW Headphone Amplifier with Active Low Shutdown Mode

SGM4809 Dual 158mW Headphone Amplifier with Active Low Shutdown Mode Dual 58mW Headphone Amplifier GENERAL DESCRIPTION The SGM4809 is a dual audio power amplifier capable of delivering 58mW per channel of continuous average power with less than 0.% distortion(thd N)when

More information