General technical data. Pollution degree 2. EMC / shock / vibration Noise emission acc. to EN Electrical safety (applied standards)
|
|
- Leon Hill
- 5 years ago
- Views:
Transcription
1 power supplies with basic functionality and a high level of reliability Single- and three-phase switched-mode power supply units Slim design Large temperature range from 25 C to 70 C The output voltage can be precisely adjusted via the potentiometer on the front Remote monitoring via integrated status relay Three-coloured LED indicators for simple error detection dvanced visual warning at 90 % rated output current International approvals Derating curves Ioutput (% IN) Ioutput (% IN) 480 Watt mbient temperature ( C) 960 Watt mbient temperature ( C) General technical data % \ mbient temp. operating / storage temperature 25 C 70 C / 40 C 85 C Max. perm. air humidity (operation) 5 % 95 % RH Degree of protection IP 20 Class of protection I, with connection Pollution degree 2 Insulation voltage input/output 3 kv E/ / 2 kv E/earth / 0.5 kv /earth MTBF > h acc. to IEC 1709 (SN29500) without diode module Housing version metal, corrosion resistant Mounting position, installation notice horizontal on mounting rail TS 35, 50 spacing top and bottom for free air circulation Short-circuit protection Yes, automatic restart Overload protection Yes, IU characteristic curve Overtemperature protection Yes, automatic restart EMC / shock / vibration Noise emission acc. to EN55022 Class B Noise iunity tests acc. to EN (ESD), EN and EN (Fields), EN (Burst), EN (Surge), EN (conducted), EN (Dips) Limiting of mains voltage harmonic currents cc. to EN Resistance against vibration and shock 1 g acc. to EN50178, shock: 15 g in all directions Electrical safety (applied standards) Electrical equipment of machines cc. to EN60204 Safety transformers for switched-mode power units cc. to EN Machinery with electronic equipment cc. to EN50178 / VDE0160 Safety extra-low voltage SELV acc. to EN , LV acc. to EN Protective separation / protection against electrical shock VDE / acc. to DIN Protection against dangerous shock currents cc. to VDE /2015
2 PRO ECO 72W 24V 3 PRO ECO 120W 24V 5 L () N () L () N () Pay attention to polarity of connection Pay attention to polarity of connection input voltage range frequency range input voltage range current consumption current consumption fuse (internal) / inrush current Recoended back-up fuse voltage Continuous output 24 V Power 24 V, 60 C OK larm Wire cross-section, rigid Wire cross-section, flexible Wire cross-section, WG/kcmil V V 100 V ) V ) 230 V / 110 V 370 V / 120 V Yes / max / DI, Safety fuse 6, Char. B, Circuit breaker 2...4, Char. C, Circuit breaker 24 V ± 1 % V (adjustable via potentiometer on front) < 100 ms / < V, I R 3 up to 55 C 55 C, 70 C 3.6 for 1 min, ED = 5 % V 35 V LED Green (U output > 21.6 V ) LED Red (Overload, overtemperature, short-circuit, U output < 20.4 V ) Yes / NO contact / max. 30 V / 1 voltage > 21.6 V / < 20.4 V > V & 3 4 W / 9.5 W < 1 m > 230 V / > 115 V > V / > V 125 / 34 / 100 / 0.5 kg 3 for L/N/ 5 (,,, - -) 0.5/6 0.5/6 26/12 26/ V V 100 V ) V ) 230 V / 110 V 370 V / 120 V Yes / max / DI, Safety fuse 6, Char. B, Circuit breaker 3...5, Char. C, Circuit breaker 24 V ± 1 % V (adjustable via potentiometer on front) < 100 ms / < V, I R 5 up to 55 C 55 C, 70 C 6 for 1 min, ED = 5 % V 35 V LED Green (U output > 21.6 V ) LED Red (Overload, overtemperature, short-circuit, U output < 20.4 V ) Yes / NO contact / max. 30 V / 1 voltage > 21.6 V / < 20.4 V > V & 5 4 W / 15 W < 1 m > 230 V / > 115 V > V / > V 125 / 40 / 100 / 0.6 kg 3 for L/N/ 6 (,,,, - -) 0.5/6 0.5/6 26/12 26/ PRO ECO 72W 24V PRO ECO 120W 24V /2015.5
3 PRO ECO 240W 24V 10 PRO ECO 480W 24V 20 L () N () L () N () Pay attention to polarity of connection Pay attention to polarity of connection input voltage range frequency range input voltage range current consumption current consumption fuse (internal) / inrush current Recoended back-up fuse voltage Continuous output 24 V Power 24 V, 60 C OK larm Wire cross-section, rigid Wire cross-section, flexible Wire cross-section, WG/kcmil V V 100 V ) V ) 230 V / 110 V 370 V / 120 V Yes / max / DI, Safety fuse 10, Char. B, Circuit breaker 3...4, Char. C, Circuit breaker 24 V ± 1 % V (adjustable via potentiometer on front) < 100 ms / < V, I R 10 up to 55 C 55 C, 70 C 12 for 1 min, ED = 5 % V 35 V LED Green (U output > 21.6 V ) LED Red (Overload, overtemperature, short-circuit, U output < 20.4 V ) Yes / NO contact / max. 30 V / 1 voltage > 21.6 V / < 20.4 V > V & 10 3 W / 24 W < 1 m > 230 V / > 115 V > V / > V 125 / 60 / 100 / 1 kg 3 for L/N/ 6 (,,,, - -) 0.5/6 0.5/6 26/12 26/12 0.5/ / V V 100 V ) V ) 230 V / 110 V 370 V / 120 V Yes / max. 3 6 / DI, Safety fuse 16, Char. B, Circuit breaker 6 8, Char. C, Circuit breaker 24 V ± 1 % V (adjustable via potentiometer on front) < 100 ms / < V, I R 20 up to 55 C 55 C, 70 C 24 for 1 min, ED = 5 % V 35 V LED Green (U output > 21.6 V ) LED Red (Overload, overtemperature, short-circuit, U output < 20.4 V ) Yes / NO contact / max. 30 V / 1 voltage > 21.6 V / < 20.4 V > V & 20 5 W / 43 W < 1 m > 230 V / > 115 V > V / > V yes, max / 100 / 120 / 1.6 kg 3 for L/N/ 7 (,,,, -,-,-) 0.5/6 0.18/6 26/12 26/ PRO ECO 240W 24V PRO ECO 480W 24V /2015
4 PRO ECO 960W 24V 40 L () N () Pay attention to polarity of connection input voltage range frequency range input voltage range current consumption current consumption fuse (internal) / inrush current Recoended back-up fuse voltage Continuous output 24 V Power 24 V, 60 C OK larm Wire cross-section, rigid Wire cross-section, flexible Wire cross-section, WG/kcmil V V 100 V ) V ) 230 V / 110 V 370 V / 120 V Yes / max / DI, Safety fuse 20, Char. B, Circuit breaker 16, Char. C, Circuit breaker 24 V ± 1 % V (adjustable via potentiometer on front) < 100 ms / < V, I R 40 up to 50 C 50 C, 70 C 48 for 1 min, ED = 5 % V 35 V LED Green (U output > 21.6 V ) LED Red (Overload, overtemperature, short-circuit, U output < 20.4 V ) Yes / NO contact / max. 30 V / 1 voltage > 21.6 V / < 20.4 V > V & 40 6 W / 76 W < 1 m > 230 V / > 115 V > V / > V yes, max / 160 / 120 / 2.9 kg 3 for L/N/ 7 (,,,,, - -) 0.18/6 0.5/16 0.5/ /10 26/10 22/8 0.5/ / PRO ECO 960W 24V /2015.7
5 PRO ECO3 120W 24V 5 PRO ECO3 240W 24V 10 L1 () L2 () L3 L1 () L2 () L3 Pay attention to polarity of connection Pay attention to polarity of connection input voltage range frequency range input voltage range current consumption current consumption fuse (internal) / inrush current Recoended back-up fuse 3 x x 500 V (Wide-range input) 3 x x 575 V / 2 x x 575 V Hz V (max. 500 V in accordance with UL 508) 3 x 500 V / 3 x 400 V 800 V / 450 V Yes / max / DI, Safety fuse 2...3, Char. C, Circuit breaker 3 x x 500 V (Wide-range input) 3 x x 575 V / 2 x x 575 V Hz V (max. 500 V in accordance with UL 508) 3 x 500 V / 3 x 400 V 800 V / 450 V Yes / max / DI, Safety fuse 2...3, Char. C, Circuit breaker voltage Continuous output 24 V Power 24 V, 60 C OK larm Wire cross-section, rigid Wire cross-section, flexible Wire cross-section, WG/kcmil 24 V ± 1 % V (adjustable via potentiometer on front) < 100 ms / < V, I R 5 up to 55 C 55 C, 70 C 6 for 1 min, ED = 5 % V 35 V LED Green (U output > 21.6 V ) LED Red (Overload, overtemperature, short-circuit, U output < 20.4 V ) Yes / NO contact / max. 30 V / 1 voltage > 21.6 V / < 20.4 V 87 3 x 500 V / 88 3 x 400 V 6 W / W < 1 m > 3 x 500 V / > 3 x 400 V > 40 3 x 500 V / > 20 3 x 400 V 125 / 40 / 100 / 0.6 kg 4 for L1/L2/L3/ 6 (,,,, - -) 0.18/6 0.5/6 26/10 26/ V ± 1 % V (adjustable via potentiometer on front) < 100 ms / < V, I R 10 up to 55 C 55 C, 70 C 12 for 1 min, ED = 5 % V 35 V LED Green (U output > 21.6 V ) LED Red (Overload, overtemperature, short-circuit, U output < 20.4 V ) Yes / NO contact / max. 30 V / 1 voltage > 21.6 V / < 20.4 V 88 3 x 500 V / 89 3 x 400 V 8 W / 26 W < 0.5 m > 3 x 500 V / > 3 x 400 V > 40 3 x 500 V / > 20 3 x 400 V 125 / 60 / 100 / 1 kg 4 for L1/L2/L3/ 6 (,,,, - -) 0.18/6 0.5/6 26/10 26/ PRO ECO3 120W 24V PRO ECO3 240W 24V /2015
6 PRO ECO3 480W 24V 20 PRO ECO3 960W 24V 40 L1 () L2 () L3 L1 () L2 () L3 Pay attention to polarity of connection Pay attention to polarity of connection input voltage range frequency range input voltage range current consumption current consumption fuse (internal) / inrush current Recoended back-up fuse voltage Continuous output 24 V Power 24 V, 60 C OK larm Wire cross-section, rigid Wire cross-section, flexible Wire cross-section, WG/kcmil 3 x x 500 V (Wide-range input) 3 x x 575 V / 2 x x 575 V Hz V (max. 500 V in accordance with UL 508) 3 x 500 V / 3 x 400 V 800 V / 450 V Yes / max / DI, Safety fuse 3...5, Char. C, Circuit breaker 24 V ± 1 % V (adjustable via potentiometer on front) < 100 ms / < V, I R 20 up to 55 C 55 C, 70 C 24 for 1 min, ED = 5 % V 35 V LED Green (U output > 21.6 V ) LED Red (Overload, overtemperature, short-circuit, U output < 20.4 V ) Yes / NO contact / max. 30 V / 1 voltage > 21.6 V / < 20.4 V 89 3 x 500 V / 90 3 x 400 V 8 W / 48 W < 0.5 m > 3 x 500 V / > 3 x 400 V > 30 3 x 500 V / > 20 3 x 400 V yes, max / 100 / 120 / 1.3 kg 4 for L1/L2/L3/ 7 (,,,, -,-,-) 0.18/6 0.18/6 26/10 26/ x x 500 V (Wide-range input) 3 x x 575 V / 2 x x 575 V Hz V (max. 500 V in accordance with UL 508) 3 x 500 V / 3 x 400 V 800 V / 450 V Yes / max / DI, Safety fuse 10, Char. B, Circuit breaker 6...8, Char. C, Circuit breaker 24 V ± 1 % V (adjustable via potentiometer on front) < 100 ms / < V, I R 40 up to 50 C 50 C, 70 C 48 for 1 min, ED = 5 % V 35 V LED Green (U output > 21.6 V ) LED Red (Overload, overtemperature, short-circuit, U output < 20.4 V ) Yes / NO contact / max. 30 V / 1 voltage > 21.6 V / < 20.4 V 90 3 x 500 V / 91 3 x 400 V 5 W / 95 W < 1 m > 3 x 500 V / > 3 x 400 V > 25 3 x 500 V / > 20 3 x 400 V yes, max / 160 / 120 / 2.5 kg 4 for L1/L2/L3/ 7 (,,,, -,-,-) 0.18/6 0.5/16 0.5/ /10 26/10 22/8 0.5/ / PRO ECO3 480W 24V PRO ECO3 960W 24V /2015.9
7 connectpower diode module CP DM 10 CP DM 20 E1 E2 V V V V E1 E2 V V -V V -V E1 E2 -V E1 E2 -V voltage current voltage current mbient temperature (operational) Storage temperature Degree of efficiency at max. load Mounting position, installation notice Installation advice Weight 40 V max. 2 x max. U in V typical max. or 10 max. for redundancy operation -10 C...55 C -20 C...85 C 95.5% horizontally, on terminal rail TS 35 Space: side 2 cm; above/below 10 cm 0.4 kg CE; culus; curus 40 V max. 2 x max. U in V typical max. or 20 max. for redundant operations -10 C...55 C -20 C...85 C 97.5% horizontally, on terminal rail TS 35 Space: side 2 cm; above/below 10 cm 0.4 kg CE; culus; curus Dimensions Clamping range (nominal / min. / max.) Depth x width x height 4 / 0. / 6 4 / 0. / / 55.5 / / 55.5 / / 0. / 6 10 / 0.32 / / 55.5 / / 55.5 / 125 CP DM CP DM ccessories /2015
8 - ccessories Small metal foot Large metal foot Small plastic foot Large plastic foot MT 30 MF MT 45 MF MT 30 BK MT 45 BK Small wall mounting Large wall mounting CP WLLDPTER 30 MM CP WLLDPTER 45 MM Small screwdriver Blade type Size/F a b c SDIK PH SDIS 0.5X3.0X100 B Markers End bracket For DIN rail TS 35 Colour Qty. SM 18/9.5 K MC NE WS white Polyamide with fibre glass, screwable Colour Torque Qty. WEW 35/1 SW black /
wenlok.com.mx Switched-mode and uninterruptible power supplies, and electronic fuses Let s connect. Power supply Catalogue 2015/2016
Switched-mode and uninterruptible power supplies, and electronic fuses Catalogue 2015/2016 Let s connect. Power supply Switch-Mode and Uninterruptible Power Supplies, Electronic Fuses Catalogue 4.3 Switch-Mode
More informationData sheet Functional Electronics PRO-M. Power supplies for space-saving use in automation technology
Data sheet Functional Electronics Power supplies for space-saving use in automation techlogy NE = Power-Reliable-Optimized The optimal and reliable power supply for use in automation techlogie. The solid,
More informationDatasheet. PRO-M Series Power Supplies
Datasheet PRO-M Series Power Supplies N E W These compact and efficient power supplies are optimized for machinery, with features that include overload resistance and high performance reserves. They also
More informationMINI-PS AC/24DC/1.3
Power supply unit INTERFACE Data sheet 102894_en_03 1 Description PHOENIX CONTACT 2015-11-17 Features MINI POWER power supplies for MCR technology In measurement and control technology (MCR), modular electronics
More informationCP-T range Product group picture
Product group picture /1 ABB Catalog Electronic Products and Relays 1/1 2CDC 110 00 C09 Table of contents CP-T range Product group picture /1 Table of contents /2 Benefits and advantages / Ordering details
More informationQUINT-PS-24DC/24DC/10
QUINT-PS-24/24/10 QUINT - converter, primary switched mode, input: 24 V, output: 24 V /10 A INTERFACE Data Sheet PHOENIX CONTACT - 02/2006 Description The QUINT - converter 24 V/10 A converts the voltage
More informationPower supply CP-E 24/0.75
2CDC 271 016 F0t06 a OUTPUT L+, L : terminals output b INPUT L, N, PE: terminals input c LOW: red LED output voltage too low d OK: green LED output voltage OK e OUTPUT Adjust: rotary potentiometer output
More informationPower supply CP-E 24/2.5
2CDC 271 015 F0t06 a OUTPUT L+, L : terminals output b DC OK: terminal signalling output c INPUT L, N, PE: terminals input d OUTPUT OK: green LED output voltage OK e OUTPUT Adjust: potentiometer adjustment
More informationPower supply CP-E 24/2.5
2CDC 271 015 F0t06 a OUTPUT L+, L : terminals output b DC OK: terminal signalling output c INPUT L, N, PE: terminals input d OUTPUT OK: green LED output voltage OK e OUTPUT Adjust: potentiometer adjustment
More informationFor Immediate Delivery call KMParts.com at (866)
Contents 9/1 Page Description SN4 switched-mode power supply units 9/2 GW4 power supply units 9/3 GD4 power supply units 9/4 Basic Units, Accessories 9/5 Technical data 9/6 Dimensions 9/12 9/2 Description
More informationQUINT-PS/ 3AC/24DC/10
Primary-switched power supply with SFB technology, 3 AC, output current 10 A INTERFACE Data sheet 103131_en_01 1 Description PHOENIX CONTACT - 09/2009 Features QUINT POWER power supply units Maximum system
More informationSwitching power supplies CP range, Linear power supplies CP-L range. Content
CP range, Linear power supplies CP-L range Content Switching power supplies, primary switch mode, CP range Benefits and advantages... 136 Approvals... 137 Ordering details... 138 Technical data... 11 Dimensional
More informationCP-T range Benefits and advantages
Benefits and advantages Characteristics Rated output voltages V, V DC Output voltage adjustable via front-face rotary potentiometer OUTPUT Adjust Rated output currents 5 A, 10 A, A, A Rated output powers
More informationPower supply CP-E 24/20.0
2CDC 271 027 F0008 a OUTPUT L+, L+, L, L-: terminals output b INPUT L, N, PE: terminals input c 13-14: terminals - signalling contact d OUTPUT OK: green LED output voltage OK e OUTPUT LOW: red LED output
More informationTRIO-PS/1AC/24DC/ 5. Extract from the online catalog. Order No.:
Extract from the online catalog TRIO-PS/1AC/24DC/ 5 Order No.: 2866310 DIN rail power supply unit, primary-switched mode, 1-phase, output: 24 V DC / 5 A Commercial data EAN 4046356046640 Pack 1 pcs. Customs
More informationPower supply CP-E 12/10.0 Primary switch mode power supply Data sheet
2CDC 271 024 F0008 OUTPUT L+, L+, L-, L-: terminals - output INPUT L, N, PE: terminals - input OUTPUT OK: green LED - output voltage OK OUTPUT LOW: red LED - output voltage too low OUTPUT Adjust: potentiometer
More informationType CP-S, CP-C & CP-A Switch mode
Switch mode power CP-S, CP-C & CP-A Switch mode Characteristics CP-S and CP-C range Output current 5 A, 10 A and 20 A Integrated power reserve of up to 50 % 5 A and 10 A devices with pluggable connecting
More informationPower supply CP-D 24/4.2 Primary switch mode power supply
Data sheet Power supply CP-D 24/4.2 Primary switch mode power supply The CP-D range of modular power supply units in MDRC design (modular DIN rail components) is ideally suited for installation in distribution
More informationCP-E range Benefits and advantages
Benefits and advantages Characteristics Output voltages 5 V, 12 V, 2 V, 8 V DC Adjustable output voltages Benefits Signalling output/contact Output currents 0.625 A / 0.75 A / 1.25 A / 2.5 A / A / 5 A
More informationPower supply CP-E 48/5.0 Primary switch mode power supply Data sheet
2CDC 271 028 F0008 OUTPUT L+, L+, L-, L-: terminals - output Features Rated output voltage 48 V DC Output voltage adjustable via front-face rotary potentiometer OUTPUT Adjust Rated output current 5 A Rated
More informationQUINT-PS AC/24DC/40
Power supply unit INTERFACE Data sheet 102315_en_02 1 Description PHOENIX CONTACT 2010-04-23 Features QUINT POWER power supply units for plant and special engineering reliably start heavy loads with high
More informationQUINT-PS/ 3AC/24DC/40
Primary-switched power supply unit with SFB technology, 3 AC, output current 40 A INTERFACE Data sheet 103133_en_00 1 Description PHOENIX CONTACT - 07/2009 Features QUINT POWER power supply units Maximum
More informationPHOENIX CONTACT - 05/2008. DANGER OF EXPLOSION! Remove an item only when it is not connected to power or if it is located in the non-explosive area.
Primary-switched power supply with SFB technology, 1 AC, output current 20 A INTERFACE Data Sheet 103129_en_01 PHOENIX CONTACT - 05/2008 1 Description QUINT POWER power supply units highest system availability
More informationPower supply CP-D 24/1.3
2CDC 271 027 F0t07 a OUTPUT ++/ : terminals output Features Rated output voltage 24 V DC Output voltage adjustable via front face potentiometer OUTPUT Adjust Rated output current 1.3 A Rated output power
More informationPower supply CP-T 24/20.0 Primary switch mode power supply
Data sheet Power supply CP-T 24/20.0 Primary switch mode power supply The CP-T range of three-phase power supply units is the youngest member of ABB s power supply family. In terms of design and functionality,
More informationPower supply CP-T 24/10.0 Primary switch mode power supply
Data sheet Power supply CP-T 24/10.0 Primary switch mode power supply The CP-T range of three-phase power supply units is the youngest member of ABB s power supply family. In terms of design and functionality,
More informationPower supply CP-T 24/40.0 Primary switch mode power supply
Data sheet Power supply CP-T 24/40.0 Primary switch mode power supply The CP-T range of three-phase power supply units is the youngest member of ABB s power supply family. In terms of design and functionality,
More informationMINI-PS AC/2X15DC/1
MII-PS-100-240AC/2X15DC/1 Power supply unit ITERFACE Data sheet 100299_en_04 1 Description PHOEIX COTACT - 2010-10-20 Features MII POWER is the extremely slim power supply unit with constructional widths
More informationPrimary switch mode power supplies Product group picture
Primary switch mode power supplies Product group picture /1 ABB Catalog Electronic Products and Relays 2015 2CDC 110 004 C0210 Primary switch mode power supplies Table of contents Primary switch mode power
More informationPower supply CP-T 48/20.0 Primary switch mode power supply
Data sheet Power supply CP-T 48/20.0 Primary switch mode power supply The CP-T range of three-phase power supply units is the youngest member of ABB s power supply family. In terms of design and functionality,
More informationPower supply CP-T 48/5.0 Primary switch mode power supply
Data sheet Power supply CP-T 48/5.0 Primary switch mode power supply The CP-T range of three-phase power supply units is the youngest member of ABB s power supply family. In terms of design and functionality,
More informationPHOENIX CONTACT - 06/2008. Features. DANGER OF EXPLOSION! Only remove equipment when it is disconnected and not in the potentially explosive area.
Primary-switched power supply with SFB technology, 1 AC, output current 20 A INTERFACE Data Sheet 103383_en_00 1 Description PHOENIX CONTACT - 06/2008 Features QUINT POWER power supply units highest system
More informationADC5000 SERIES. AC/DC Switch Mode Power Supplies and Rectifiers for Industrial and Telecom Applications. 60W, 125W and 250 W
ADC5000 SERIES AC/DC Switch Mode Power Supplies and Rectifiers for Industrial and Telecom Applications 60W, 125W and 250 W Input voltage 230/115 VAC voltages 12, 24, 36 or 48 VDC Statistical MTBF >3 000
More informationQUINT-PS/ 1AC/24DC/20
Primary-switched power supply with SFB technology, 1 AC, output current 20 A INTERFACE Data sheet 103129_en_04 1 Description PHOENIX CONTACT - 02/2010 Features QUINT POWER power supply units Maximum system
More informationPower supply CP-D 12/2.1
2CDC 271 025 F0t07 a OUTPUT ++/ : terminals output Features Rated output voltage 12 V DC Output voltage adjustable via front face potentiometer OUTPUT Adjust Rated output current 2.1 A Rated output power
More informationUNO-PS/1AC/24DC/150W. Primary-switched power supply unit. Data sheet. 1 Description
Primary-switched power supply unit Data sheet 106261_en_02 PHOEIX COTACT 2015-05-13 1 Description The power supply makes a worldwide impression thanks to maximum energy efficiency. ow idling losses (o
More informationTRIO-PS-2G/1AC/24DC/5
TRIOPS2G/1AC/24DC/5 Power supply unit Data sheet 105900_en_01 PHOENIX CONTACT 20150831 1 Description TRIO POWER power supplies with standard functionality The power supplies of the TRIO POWER family convince
More informationNo-wear isolation of potentials in terminal block design
TERMOPTO Overview No-wear isolation of potentials in terminal block design Space saving solid-state relay with PUSH IN connection technology The TERMOPTO opto modules are characterised by a particularly
More informationMeasuring and monitoring relays CM-SRS.1 Current monitoring relays, single-phase AC/DC
2CDC 251 244 F0t05 Characteristics Monitoring of DC and AC currents: RMS measuring principle One device includes 3 measuring ranges Over- or undercurrent monitoring configurable Hysteresis adjustable from
More informationShort-circuit-proof switching amplifier for inductive loads up to 10 A
MICROOPTO Overview Short-circuit-proof switching amplifier for inductive loads up to 10 Powerful, compact solid-state relay with error signalling contact The MICROOPTO family offers the customer high-quality
More informationPower Supplies 3. SDN-C Compact DIN Rail Series
SDN-C Compact DIN Rail Series The SDN-C DIN rail power supplies are the next generation of the popular SDN series. These models combine high efficiency and compact size with new visual diagnostic LEDs
More informationTemperature monitoring relays CM-TCS Monitoring relays for monitoring temperatures with a PT100 sensor (2- or 3-wire connection)
Data sheet Temperature monitoring relays CM-TCS Monitoring relays for monitoring temperatures with a PT100 sensor (2- or 3-wire connection) The temperature monitoring relays CM-TCS monitor overtemperature,
More informationRelated Products SDP Series SFL Series SCP Series SCL Series SDU UPS
4 Power Supplies SDN-P DIN Rail Series The SDN DIN Rail power supplies provide industry leading performance. Sag Immunity, transient suppression and noise tolerant, the SDN series ensures compatibility
More informationPower Supplies. SCL Series. Features. Related Products. Applications
SDN Series The SDN family of DIN Rail power supplies have industry leading performance with a true industrial grade design and high quality that meets difficult industrial environmental conditions including
More informationEMD-FL-3V-400. Electronic monitoring relay for voltage monitoring in three-phase networks. INTERFACE Data sheet _en_03. 1 Description.
Electronic monitoring relay for voltage monitoring in three-phase networks INTERFACE Data sheet 102110_en_03 1 Description PHOENIX CONTACT - 09/2009 Features Increasingly higher demands are being placed
More informationCourtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Primary switched-mode power supply units In standard machine production, the requirements for a power supply unit are mostly specified in advance. Here, the TRIO POWER power supply units are suitable which
More informationLDW240 Series are single, two or three phase DIN Rail Switching Power Supplies.
LDW240 Series are single, two or three phase DIN Rail Switching Power Supplies. Its compact size, high efficiency, excellent reliability together with easy installation due to pluggable connectors makes
More informationDSA150 Series. xxx Series. 150 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details 3.92 (99.8) 2.18 (55.5) 4.92 (125.
15 Watts xxx Series Ultra Slim Design 15% Peak Load for 3 seconds Ambient Operation from -1 C to +7 C High Efficiency Selectable Overload Characteristic Selectable Remote Inhibit or Enable 3 Year Warranty
More informationLDW25-24 is a single or two phase AC or DC input DIN Rail Switching Power Supply.
LDW25-24 is a single or two phase AC or DC input DIN Rail Switching Power Supply. Its compact size, high efficiency, excellent reliability together with easy installation due to pluggable connectors makes
More informationElectronic timer CT-MVS.12 Multifunctional with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-MVS.12 Multifunctional with 1 c/o (SPDT) contact The CT-MVS.12 is a multifunctional electronic timer from the CT-S range and provides 10 timing functions and 10 time ranges.
More informationOutput Voltage* (nom.)(adjustable)
Industrial Power Supplies TIB Series, 80 480 W Slim profile, reduced module width High Power Factor up to 99% High efficiency up to 94% True back power immunity Low heat dissipation 150% peak current Automatic
More informationLDC480 Series is a single phase, extremely compact Power Supply with active PFC specially designed for space sensitive and demanding applications.
LDC480 Series is a single phase, extremely compact Power Supply with active PFC specially designed for space sensitive and demanding applications. Its compact size, high efficiency, excellent reliability
More informationElectronic timer CT-TGD.22
2CDC 251 097 F0t06 a Rotary switch for the preselection of the time range of the ON time b Potentiometer with direct reading scale for the fine adjustment of the ON time c Rotary switch for the preselection
More informationElectronic timer CT-SDS.22 Star-delta change-over with 2 n/o contacts Data sheet
CDC 0 F0t07 Features Rated control supply voltage -8 V DC, -0 V AC Single-function timer with star-delta change-over One device includes 7 time ranges (0.0 s - 0 min) n/o contacts LEDs for status indication
More informationSwitched mode power supply for DIN rail mounting type SMP23 DC24V/40A
Switched mode power supply for DIN rail mounting type SMP DC4V/40A Description Switched mode power supply (SMP) for rail mounting, three-phase supply voltage, high efficiency, integral input filter and
More informationElectronic timer CT-MXS.22 Multifunctional with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-MXS.22 Multifunctional with 2 c/o (SPDT) contacts The CT-MXS.22 is a multifunctional electronic timer from the CT-S range. It provides 5 timing functions, 2 times 10 time
More informationLDC240 Series is a single phase, ultra compact DIN Rail Switching Power Supply with active PFC, ideal for many applications.
LDC240 Series is a single phase, ultra compact DIN Rail Switching Power Supply with active PFC, ideal for many applications. Its compact size, high efficiency, excellent reliability together with easy
More informationElectronic timer CT-ERS ON-delayed with 2 c/o contacts Data sheet
1SVR 430 103 F0200 CT-ERS 1 7 2 6 5 4 8 3 1 10 selectable time ranges, from 0.05 s to 300 h 2 Potentiometer with direct reading scale for the fine adjustment of the time delay 3 Sliding switch to set the
More informationCurrent monitoring relays CM-SRS.2 for single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.2 for single-phase AC/DC currents For the monitoring of currents in single-phase AC/DC systems, ABB s CM range comprises a wide selection of powerful and compact
More informationElectronic timer CT-SDD.22
CDC 099 F0t0 a Rotary switch for the preselection of the time range b Potentiometer with direct reading scale for the fine adjustment of the time delay c U: green LED V control supply voltage applied W
More informationNotes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 320VAC 360VAC 400VAC 400VAC
Features DIN-Rail 2 and 3-phase operation Input voltage range: 320 575VAC Output trim range: 22.5 29.5VDC High electrical strength; high reliability Permanent overload and short-circuit protection Parallel
More informationSingle or parallel use selectable by user Adjustable output voltage. New narrow width saves panel space
4 Power Supplies The SolaHD Difference Rugged metal packaging Multiple output connections for ease of wiring multiple devices New visual diagnostic LEDs show input and output status (see table below) Large,
More informationElectronic timer CT-MVS.23 Multifunctional with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-MVS.23 Multifunctional with 2 c/o (SPDT) contacts The CT-MVS.22 is a multifunctional electronic timer from the CT-S range. It provides 11 timing functions and 10 time ranges.
More informationDSR120 Series. xxx Series. 120 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details
120 Watts xxx Series Ultra Slim Design - 32 mm 150% Peak Load for 3 seconds Ambient Operation from -25 C to +70 C Full Load at 60 C (24V/48V) High Efficiency - Up to 92% Volt-Free Contact for OK Selectable
More informationOutput Voltage nom. (adjustable)
Industrial Power Supplies TIB Series, 80 480 W Slim profile, for DI-rail mounting Alternative side-mounting for flat panels High power factor by active power correction Very high efficiency up to 94.5%
More informationVoltage monitoring relays CM-ESS.1 for single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.1 for single-phase AC/DC voltages For the monitoring of voltages in single-phase AC/DC systems, ABB s CM range comprises a wide selection of powerful and compact
More informationControl module CP-A CM
2CDC 271 002 F0t05 Features Pluggable onto redundancy unit CP A RU Threshold values adjustable (14 28 V) One relay output per monitored input / channel Approvals H UL 508, CAN/CSA C22.2 No.14 H UL 60950,
More informationTransformers, Power Supply Units and Socket Outlets
Transformers, Power Supply Units and Socket Outlets /2 Introduction /3 4AC3 bell transformers /4 4AC3 safety transformers /5 4AC2 power supply units /6 5TE6 REG socket outlets For further technical product
More informationCurrent monitoring relays CM-SRS.1 for single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.1 for single-phase AC/DC currents For the monitoring of currents in single-phase AC/DC systems, ABB s CM range comprises a wide selection of powerful and compact
More informationNotes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 400VAC
Features DIN-Rail Description 2 and 3-phase operation Input voltage range: 320 575VAC Output trim range: 22.5 29.5VDC High electrical strength; high reliability Permanent overload and short-circuit protection
More informationElectronic timer CT-AWS Impulse-OFF with 1 c/o contact Data sheet
2CDC 251 121 F0004 1 5 2 4 3 6 Characteristics Single-function impulse-off timer One device includes 10 time ranges, from 0.05 s to 300 h, for the adjustment of the pulse time Remote potentiometer connection
More informationSwitching Power Supply Type SPP1 60W Enclosed type
Type SPP1 60W Enclosed type Universal AC input full range Short circuit protection Internal input filter High efficiency High average efficiency (meets ErP) Low stand-by power consumption CE, TUV, and
More informationCB Scheme UL508 UL ATEX II3G
Industrial Power Supplies UL Hazloc Class I, division 2 approval and ATEX certification SEMI F47 compliant for voltage sag immunity Rugged metal case with optional side-mounting Very high efficiency up
More informationElectronic timer CT-AHS.22 OFF-delayed with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-AHS.22 OFF-delayed with 2 c/o (SPDT) contacts The CT-AHS.22 is an electronic timer from the CT-S range with OFF-delay and 10 time ranges. All electronic timers from the CT-S
More informationElectronic timer CT-AHS.22 OFF-delayed with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-AHS.22 OFF-delayed with 2 c/o (SPDT) contacts The CT-AHS.22 is an electronic timer from the CT-S range with true OFF-delay and 10 time ranges. All electronic timers from
More informationCM-MPS.11, CM-MPS-21, CM-MPS.31 and CM-MPS.41 Data sheet. UL 508, CAN/CSA C22.2 No.14 GL GOST CB scheme CCC
2CDC 251 048 F0t08 CM-MPS.11 2CDC 251 049 F0t08 CM-MPS.21 Features Monitoring of three-phase mains for phase sequence (can be switched off), phase failure, over- and undervoltage as well as phase unbalance
More informationCurrent monitoring relays CM-SRS.1 For single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.1 For single-phase AC/DC currents The CM-SRS.1 is an electronic current monitoring relay that protects single-phase mains (DC or AC) from over- and undercurrent
More informationSwitched mode power supply for DIN rail mounting type SMP21 DC24V/10A
Switched mode power supply for DIN rail mounting type SMP2 DC24V/0A Description Switched mode power supply for rail mounting, with independent change-over of input voltages (AC 5/20 V), integral passive
More informationElectronic timer CT-TGD.12 Pulse generator with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-TGD.12 Pulse generator with 1 c/o (SPDT) contact The CT-TGD.12 is an electronic time relay with the function pulse generator. It is from the CT-D range. With their MDRC profile
More information18V 35V 65V 40A 60A 1.5W 1.2W ms 40ms. 20ms 20ms
Features DIN Rail Description Universal AC Input (85264VAC) Protections: SCP, OVP, OLP, OTP DC OK Indicator LED with Relay Contacts 5% (8W) peak load capacity Builtin active PFC,PF>,95 High effciency up
More informationElectronic timer CT-MVS.23 Multifunctional with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-MVS.23 Multifunctional with 2 c/o (SPDT) contacts The CT-MVS.23 is a multifunctional electronic timer from the CT-S range. It provides 11 timing functions and 10 time ranges.
More informationATS01N206QN soft starter for asynchronous motor - ATS01-6 A V KW
Characteristics soft starter for asynchronous motor - ATS01-6 A - 380..415V - 1.5..3 KW Main Range of product Altistart 01 Product or component type Product destination Product specific application Device
More informationMonitoring Relays True RMS 3-Phase, 3-Phase+N, Multifunction Types DPC71, PPC71
Monitoring Relays True RMS 3-Phase, 3-Phase+N, Multifunction Types DPC71, PPC71 DPC71 PPC71 TRMS 3-phase over and under voltage, phase sequence, phase loss, asymmetry and tolerance monitoring relay Detect
More informationThree-phase monitoring relay CM-PFS
Data sheet Three-phase monitoring relay CM-PFS The CM-PFS is a three-phase monitoring relay that is used to monitor three phase mains for incorrect phase sequence and phase failure. All devices are available
More informationCurrent monitoring relays CM-SRS.2 For single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.2 For single-phase AC/DC currents The CM-SRS.2 is an electronic current monitoring relay that protects single-phase mains (DC or AC) from over- and undercurrent
More information2 or 4 pole changeover contact Plug-in/Faston 187
56 Miniature power relays 56 Plug-in - Power relay, & 4 pole Flange mount option - (Faston 87, 4.8 x 0.5 mm termination) C coils & DC coils Lockable test button and mechanical flag indicator Cadmium Free
More information18V 35V 65V 40A 60A 1.5W 1.2W ms 40ms. 20ms 20ms. 100mVp-p 200mVp-p 120mVp-p 240mVp-p -25 C - 70 C 48Vout 240mVp-p
Features DIN Rail Universal AC Input (85) Protections: SCP, OVP, OLP, OTP DC OK Indicator LED with Relay Contacts 15% (18W) peak load capacity Builtin active PFC,PF>,95 High effciency up to 9.5% AC/DC
More informationTSX Series. Modicon Manuals. Presented by: Modicon PLC. Schneider Electric Quantum Modicon Gould Gettys
TSX Series Modicon Manuals Presented by: Modicon PLC Schneider Electric Quantum Modicon Gould Gettys For Product Needs: Email: sales@modiconplc.com Call: 1-800-691-8511 Fax: 919-415-1614 ModiconPLC.com
More informationOutput Voltage nom. (adjustable)
Industrial Power Supplies TIB Series, 80 480 W Slim profile, reduced module width Alternative side-mounting for flat panels Active Power Factor High efficiency up to 94% Back power immunity 150% peak current
More informationElectronic timer CT-SDS.22
CDC 0 F0t07 Features Rated control supply voltage 8 V DC, 0 V AC Single function timer with star delta change over One device includes 7 time ranges (0.0 s 0 min) n/o contacts LEDs for status indication
More informationABB 1. Multifunctional three-phase monitoring relays. CM-MPS.11, CM-MPS-21, CM-MPS.31 and CM-MPS.41 Data sheet. Features. Approvals. Marks.
2CDC 251 048 F0t08 CM-MPS.11 2CDC 251 049 F0t08 CM-MPS.21 2CDC 251 050 F0t08 CM-MPS.31 2CDC 251 051 F0t08 CM-MPS.41 R/T: yellow LED - relay status, timing F1: red LED - fault message F2: red LED - fault
More informationThree-phase monitoring relays
2CDC 251 046 F0t08 Features Monitoring of three-phase mains for phase sequence, phase failure, phase unbalance Threshold value for phase unbalance adjustable as absolute value Tripping delay can be adjusted
More informationElectronic timer CT-MFS.21
2CDC 251 053 F0t07 a Rotary switch for the preselection of the time range b Potentiometer with direct reading scale for the fine adjustment of the time delay c Rotary switch for the preselection of the
More informationWatts HCP Series
ACDC 6 Watts HCP Series High Efficiency up to 9% xppower.com High Power Density Programmable Output Voltage (%%) Programmable (%%) Parallel Operation Fully Featured Signals & Controls Year Warranty Specification
More informationLCL Series. SIngle Output Industrial Supplies. High Efficiency. Low Cost. 150 W Convection Cooled. 300 W & 500 W with Internal Fans
LCL Series SIngle Output Industrial Supplies High Efficiency Low Cost 150 W Convection Cooled 300 W & 500 W with Internal Fans Outputs form 12 V to 48 V 3 Year Warranty The LCL series is a low cost chassis
More informationMonitoring Relays True RMS 3-Phase, 3-Phase+N, Multifunction Types DPC01, PPC01
Monitoring Relays True RMS 3-Phase, 3-Phase+N, Multifunction Types DPC01, PPC01 DPC01 PPC01 TRMS 3-phase over and under voltage, phase sequence, phase loss, asymmetry and tolerance monitoring relay Detect
More information3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket
41 Low profile PCB relays 8-12 - 16 41 1 & 2 Pole - Low profile (15.7 mm height) 41.31-1 Pole 12 (3.5 mm pin pitch) 41.52-2 Pole 8 (5 mm pin pitch) 41.61-1 Pole 16 (5 mm pin pitch) PCB mount - direct or
More informationABB NEW. Three-phase monitoring relays. CM-PVS.31 and CM-PVS.41 Data sheet. Features J. Approvals. Marks. Order data. Order data - Accessories
2CDC 251 042 F0t08 CM-PVS.31 Features Monitoring of three-phase mains for phase sequence (can be switched off), phase failure, over- and undervoltage Threshold values for over- and undervoltage are adjustable
More informationVoltage monitoring relay CM-EFS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relay CM-EFS.2 For single-phase AC/DC voltages The CM-EFS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
More informationVoltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages The CM-ESS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
More information