4th digit. 7th digit. digits. Specifications. Interface. MECHATROLINK-2 communications Reference Type (for rotary servomotors)

Size: px
Start display at page:

Download "4th digit. 7th digit. digits. Specifications. Interface. MECHATROLINK-2 communications Reference Type (for rotary servomotors)"

Transcription

1 MECHATROLINK- Communications Reference Type PACKs SGDV- (For Rotary Servomotors) SGDV- 5 (For Linear Servomotors) Model Designations S G D V - R70 A A v Series SGDV PACK st+nd+ rd digits 4th digit 5th+6th digits 7th digit 8th+9th+ 0th digits th+th digits th digit 7 st+nd+rd digits Current Voltage Code Applicable Servomotor Max. Capacity kw Singlephase 00 V Threephase 00 V Threephase 400 V R R90 0. R 0. R8 0.4 R R90 0. R6 0. R8 0.4 R R R R9 0.5 R5.0 5R4.5 8R th digit Power Supply Voltage Code F A D 5th+6th digits 7th digit A, B Code 5 Single-phase 00 VAC Three-phase 00 VAC Three-phase 400 VAC Interface MECHATROLINK- communications Reference Type (for rotary servomotors) MECHATROLINK- communications Reference Type (for linear servomotors) Design Revision Order 8th+9th+0th digits Options (hardware) 4 Code 000 Base-mounted (standard) 00 Rack-mounted 00 Varnished 00 Rack-mounted and Varnished 008 th+th digits Options (software) Code 00 Standard th digit Options (parameter) Code Single-phase 00 VAC input Model: SGDV-0AA Dynamic brake (400 V PACKs only ) 0 Standard : These amplifiers can be powered with single or three-phase. : Single-phase 00 VAC PACKs are also available. (Model: SGDV-0AA008000) : PACKs of 6 kw or more are duct-ventilated. 4: Multiple codes can be selected, but some combinations are not possible. Note: If the option codes digits 8 to are all zeros, they are omitted.

2 M- Type PACKs SGDV- /5 Features Real-time communications MECHATROLINK- communications enable high-speed control for 0 stations at a maximum transmission speed of 0 Mbps in a transmission cycle from 50μs to 4 ms (set by the host controller). Such a high transmission speed allows real-time transmission of various data required for control. Cost savings Thirty stations can be connected to a single MECHATROLINK- transmission line, so wiring costs and time are greatly reduced. Also, only one signal connector is required on the host controller. And, the all-digital network eliminates the need for conversion from digital to analog for speed/torque references and for a pulse generator to generate position references. High-precision motion control The SGDV PACK when connected to the host controller in the MECHATROLINK- network provides not only torque, position, and speed control but also synchronized phase control that requires advanced control technology. The control mode can be changed online so that the machine can move smoothly in complex motions with great efficiency. Ratings Single-phase 00 V PACK Model SGDV- R70F R90F RF R8F Applicable Servomotor Max. Capacity kw Continuous Output Current Arms Max. Output Current Arms Regenerative Resistors None or external Main Circuit Single-phase 00 to 5 VAC+0% to -5% 50/60 Hz Control Circuit Single-phase 00 to 5 VAC+0% to -5% 50/60 Hz Three-phase 00 V : The rated voltage is 0 to 0 VAC for the SGDV-0AA PACK. PACK Model SGDV- R70A R90A R6A R8A R8A 5R5A 7R6A 0A 80A 00A 0A 470A 550A 590A 780A Applicable Servomotor Max. Capacity kw Continuous Output Current Arms Max. Output Current Arms Regenerative Resistors None or external Built-in or external External Main Circuit Three-phase 00 to 0 VAC+0% to -5% 50/60 Hz Control Circuit Single-phase 00 to 0 VAC+0% to -5% 50/60 Hz Three-phase 400 V PACK Model SGDV- R9D R5D 5R4D 8R4D 0D 70D 0D 60D 80D 70D Applicable Servomotor Max. Capacity kw Continuous Output Current Arms Max. Output Current Arms Regenerative Resistors Built-in or external External Main Circuit Three-phase 80 to 480 VAC+0% to -5% 50/60 Hz Control Circuit 4 VDC ±5% Note: The entire over voltage category is. PACK Overload Characteristics Detecting time (s) Detecting time (s) SGMAV-0, 04, 06, 08 0 SGMPS SGMJV SGMGV-44A, -55A, SGMAV-A5, 0, C -75A % torque Rated Rated torque + Max. torque Approx. Torque reference(percent of rated torque) Torque reference(percent of rated torque) (percent of torque (%) (%) rated torque) Note: Overload characteristics shown above do not guarantee continuous duty of 00% or more output. Use a servomotor with effective torque within the continuous duty zone of Torque-Motor Speed Characteristics. : The dotted line indicates the characteristics of a combination of SGDV-00A PACKs and SGMGV-0A servomotors. Single-phase 00 V PACK Model SGDV- R70A R90A R6A R8A 5R5A 0A Applicable Servomotor Max. Capacity kw Continuous Output Current Arms Max. Output Current Arms Regenerative Resistors None or external Built-in or external Main Circuit Single-phase 00 to 0 VAC+0% to -5% 50/60 Hz Control Circuit Single-phase 00 to 0 VAC+0% to -5% 50/60 Hz Detecting time (s) SGMGV-0A, -05A, -09A, -A -0A, -0A, -AA, -EA SGMGV- D SGMSV- Max. torque M- Type PACKs 7

3 7 Items Control Method Feedback Operating Conditions Rotary Servomotors With Linear Servomotors Ambient Temperature Storage Temperature Ambient Humidity IGBT PWM control, sine-wave driven Serial encoder: -bit (incremental encoder) : 7-bit (incremental/absolute encoder) : 0-bit (incremental/absolute encoder) Absolute linear scale (The signal resolution varies depending on the absolute linear scale.) Incremental linear scale (The signal resolution varies depending on the incremental linear scale or serial converter unit.) 0 to +55 C 0 to +85 C 90%RH or less Storage Humidity 90%RH or less Vibration Resistance 4.9 m/s Shock Resistance 9.6 m/s With no freezing or condensation Protection Class IP0 An environment that satisfies the following conditions. Free of corrosive or flammable gases Free of exposure to water, oil, or chemicals Pollution Degree Free of dust, salts, or iron dust Altitude Others Applicable Standards Mounting Performance Communications Display Analog Monitor Dynamic Brake (DB) Speed Control Range Speed Regulation Load Fluctuation Voltage Fluctuation 000 m or less Do not use PACKs in the following locations: Locations subject to static electricity noise, strong electromagnetic/magnetic fields, radioactivity UL508C (E478) EN5078, EN550/A group classa, EN , EN6800-, EN , EN954-, IEC6508- to 4 Standard: Base-mounted Optional: Rack-mounted, Duct-ventilated :5000 (The lower limit of the speed control range must be lower than the point at which the rated torque does not cause the servomotor to stop.) 0% to 00% load: ±0.0% max. (at rated speed) Rated voltage: ±0% : 0% (at rated speed) Temperature Fluctuation 5±5 C : ±0.% max. (at rated speed) Torque Control Tolerance (Repeatability) ± % Soft Start Time Setting 0 to 0 s (can be set individually for acceleration and deceleration.) Interface Digital operator (JUSP-OP05A--E), personal computer (can be connected with SigmaWin+) RS-4A :N communications RS-4A port: N=5 max. available Communications USB Communications Regenerative Processing Overtravelling (OT) Prevention Protective Functions Utility Functions Safety Functions Option Module Axis address setting Interface Communications Standard Input Output Applicable Standards Set by parameters Personal computer (can be connected with SigmaWin+.) Compliant with USB. standard ( Mbps) CHARGE indicator Number of points: Output voltage: ±0 VDC (linearity effective range ±8 V) Resolution: 6 bit Accuracy: ±0 mv (Typ) Max. output current: ±0 ma Settling time (±%):. ms (Typ) Activated when a servo alarm or overtravelling (OT) occurs, or when the power supply for the main circuit or servomotor is OFF. Included For more information, refer to the previous page. Dynamic brake stop at P-OT or N-OT, deceleration to a stop, or free run to a stop Overcurrent, Overvoltage, low voltage, overload, regeneration error, etc. Gain adjustment, alarm history, JOG operation, origin search, etc. /HWBB, /HWBB: Baseblock signal for power module EDM: Status monitor (fixed output) of built-in safety circuit EN954 category, IEC6508 SIL Fully-closed Module : Speed regulation is defined as follows: Speed regulation= No-load motor speed Total load motor speed 00% Rated motor speed The motor speed may change due to voltage fluctuation or temperature fluctuation. The ratio of speed changes to the rated speed represent speed regulation due to voltage and temperature fluctuations. : Perform risk assessment for the system and confirm that the safety requirements for the standards are fulfilled before using the HWBB function.

4 M- Type PACKs SGDV- /5 Rotary Servomotors Items Encoder Output Pulses Sequence Input I/O Signal Sequence Output Panel Operator MECHATROLINK Communications Command Method Linear Servomotors Items Encoder Output Pulses Sequence Input I/O Signal Sequence Output Panel Operator MECHATROLINK Communications Command Method Fixed Input Input Signals which can be allocated Fixed Output Output Signals which can be allocated Phase A, phase B, phase C: line driver output The number of dividing pulse: Any setting ratio is available. SEN signal Number of Channels Function Servo alarm (ALM) Number of Channels Function 7 channels Homing deceleration switch signal (/DEC) External latch signals (/EXT to ) Forward run prohibited (P-OT), reverse run prohibited (N-OT) Forward external torque limit (/P-CL), reverse external torque limit (/N-CL) Positive and negative logic can be changed. channels Positioning completion (/COIN) Speed limit detection (/VLT) Speed coincidence detection (/V-CMP) Brake (/BK) Rotation detection (/TGON) Warning (/WARN) Servo ready (/S-RDY) Near (/NEAR) Torque limit detection (/CLT) Positive and negative logic can be changed. Display Unit One 7-segment LED Switch Rotary switch: 6 positions, DIP switch: 4 poles Communications Protocol MECHATROLINK- MECHATROLINK- Transmission Speed 0 Mbps 4 Mbps Transmission Cycle 50 μs, 0.5 to 4.0 ms (multiple of 0.5 ms) ms Number of Words for Can be switched between Link Transmission 7-bytes /station and -bytes / station. 7-bytes /station Station Address 4H to 5FH (max. number of slaves: 0) Performance Command Input Position control, speed control, and torque control through MECHATROLINK communications MECHATROLINK commands (for sequence, motion, data setting/reference, monitor, adjustment, and other commands.) Phase A, phase B, phase C: line driver output The number of dividing pulse: Any setting ratio is available. Fixed Input SEN signal Number of Channels 7 channels Homing deceleration switch signal (/DEC) Input Signals which can be allocated Function External latch signals (/EXT to ) Forward run prohibited (P-OT), reverse run prohibited (N-OT) Forward external force limit (/P-CL), reverse external force limit (/N-CL) Positive and negative logic can be changed. Fixed Output Servo alarm (ALM) Number of Channels channels Positioning completion (/COIN) Speed limit detection (/VLT) Speed coincidence detection (/V-CMP) Brake (/BK) Output Signals which Servomotor movement detection (/TGON) can be allocated Function Warning (/WARN) Servo ready (/S-RDY) Near (/NEAR) Force limit detection (/CLT) Positive and negative logic can be changed. Display Unit One 7-segment LED Switch Rotary switch: 6 positions, piano switch: 4 poles Communications Protocol MECHATROLINK- MECHATROLINK- Transmission Speed 0 Mbps 4 Mbps Transmission Cycle 50 μs, 0.5 to 4.0 ms (multiple of 0.5 ms) ms Number of Words for Can be switched between Link Transmission 7-bytes /station and -bytes / station. 7-bytes /station Station Address 4H to 5FH (max. number of slaves: 0) Performance Command Input Position control, speed control, and force control through MECHATROLINK- communications MECHATROLINK commands and MECHATROLINK- commands (for sequence, motion, data setting/reference, monitor, adjustment, and other commands.) M- Type PACKs 74

5 Power Supply Capacities and Power Losses The following table shows PACK's power supply capacities and power losses at the rated output. Main Circuit Power Supply Signal-phase 00 V Single-phase 00 V Three-phase 00 V Three-phase 400 V Applicable Servomotor Max. Capacity kw PACK Model SGDV- Power Supply Capacity kva Output Current : For the optional JUSP-RA04-E regenerative resistor unit. : For the optional JUSP-RA05-E regenerative resistor unit. : For the optional JUSP-RA8-E regenerative resistor unit. 4: For the optional JUSP-RA9-E regenerative resistor unit. Notes: SGDV-R70F, -R90F, -RF, -R8F, -R70A, -R90A, -R6A, and -R8A PACKs do not have built-in regenerative resistors. If the regenerative energy exceeds the specified value, connect an external regenerative resistor (optional). SGDV-470A, -550A, -590A, -780A, -0D, -60D, -80D, -70D PACKs do not have built-in regenerative resistors. Be sure to connect a regenerative resistor unit (optional) or an external regenerative resistor (optional). For selection details, refer to page 5. Regenerative resistor power losses are allowable losses. Take the following action if this value is exceeded. Remove the lead or short bar that is short-circuiting the PACK main circuit terminal B and B. (SGDV-R8A, -5R5A, -7R6A, -0A, -80A, -00A, -0A, or 400-V class PACKs.) Install an external regenerative resistor (optional). For selection details, refer to page 5. Arms Main Circuit Power Loss 0.05 R70F W Regenerative Resistor Power Loss W Control Circuit Power Loss W Total Power Loss 0. R90F RF R8F R70A R90A R6A R8A R5A A R70A R90A R6A R8A R8A R5A R6A A A A A A (80) A A (50) A R9D R5D R4D R4D D D D D D D W.4 75

6 M- Type PACKs SGDV- /5 REF ALARM SVON YASKAWA DIGITAL OPERATOR REF ALARM SVON YASKAWA READ WRITE DIGITAL OPERATOR Selecting Cables Cables for CN CN CN5 CN6 CN7 CN8 (MECHATROLINK- Communications Reference Type PACKs) CN5 CN6 CN Cable for Analog Monitor Digital Operator Converter Cable MECHATROLINK- Communication Cable Connect to the MECHATROLINK- Digital Operator CN7 CN Connection Cable for Personal Computer Cable for I/O Signals READ WRITE LED Indicator for External Device CN8 Cable for Safety Function Device Name Length Order No. Details Soldered Connector Kit JZSP-CSI9--E CN Cables for I/O Signals CN Connector Terminal Converter Unit Cable with Loose wire at One End 0.5 m JUSP-TA6P-E m JUSP-TA6P--E m JUSP-TA6P--E m JZSP-CSI0--E m JZSP-CSI0--E m JZSP-CSI0--E Terminal Block and Connection Cable With Connection Cable ( m) Digital Operator JUSP-OP05A--E 4 Cable with Connectors at Both Ends Digital Operator 0. m JZSP-CVS05-A-E 5 Converter Cable JZSP-CVS05-A-E 04 M- Type PACKs CN7 Connection Cables for Personal Computer CN6A CN6B MECHATROLINK- Communication Cable Cables with Connectors at Both Ends Cables with Connectors at Both Ends (with Ferrite Core) Cable with Connectors at Both Ends.5 m JZSP-CVS06-0-E to 50 m 0.5 to 50 m JEPMC-W600- -E JEPMC-W600- -E JZSP-CVS06-0-E 7 8 Terminator JEPMC-W60-E 9 CN5 Cables for Analog Monitor PACK End m JZSP-CA0-E 6 CN8 Cable for Safety Function Device Cables with Connector m JZSP-CVH0-0-E Connector kit Contact Tyco Electronics AMP K.K. Product name : Industrial Mini I/O D-shape Type Plug Connector Kit Model : : A converter cable is required to use series digital operators (model: JUSP-OP05A) for series PACKs. : When using the safety function, connect this cable to the safety devices. Even when not using the safety function, use PACKs with the Safe Jumper Connector (model: JZSP-CVH05-E) connected. : Use the connector kit when you make cables yourself. 76

7 Selecting Cables () Connector Kit for CN Use the following connector and cable to assemble the cable. The CN connector kit includes one case and one connector. Connector Kit Model JZSP-CSI9--E 06-5A0-008 set : Manufactured by Sumitomo M Ltd. Cable Item Applicable Wires Cable Finished Diameter Case Connector Model Qty Model Qty PE (Soldered) Use twisted-pair or twisted-pair shielded wire. AWG dia. max. External Dimensions of Case (Units: mm) Cable Size External Dimensions of Connector (Units: mm).54.7 Pin No.5 Pin No.4 Pin No.5 Pin No Pin No. Pin No. Pin No. Pin No. 5.8 Pin No. Pin No () Connector Terminal Converter Unit for CN Configurations External Dimensions of Terminal Block (Units: mm) PACK CN +50 Cable Length mm B A Model JUSP- TA6 P External Dimensions of Cable (Units: mm) PACK End Connector (6P) EL (Sumitomo M Ltd.) Shell 06-5A0-008 (Sumitomo M Ltd.) Cable () AWG#8, 8P SSRFPVV-SB B0 A Terminal Block (40P) M.5 Screw B A B0 A0 Can be fixed on DIN rail Connector Plug (40P) FCN-64P040-AU Dia Terminal Converter Unit-end Connector (40P) FCN-6J040-AU (Fujitsu Ltd.) Cover FCN-60C040-B (Fujitsu Ltd.) Model Cable Length (L) Approx. Mass JUSP-TA6P-E 0.5 m 00 g JUSP-TA6P--E m 00 g JUSP-TA6P--E m 400 g L Note: The pin number in the PACK connector and the pin number in the terminal block are the same. Pin numbers to 6 are used in the terminal block. Do not use a pin number of 7 or higher. If assembling cables, refer to Cable with Loose Wires at One End for CN Connection Diagram of JZSP-CSI0- -E Cable on the next page.

8 M- Type PACKs SGDV- /5 Selecting Cables 7. () Cable with Loose Wires at One End for CN External Dimensions of Cable (Units: mm) (4) Digital Operator (Model: JUSP-OP05A--E) (Units: mm) REF ALARM SVON READ 70 YASKAWA WRITE DIGITAL OPERATOR PACK End Connector EL (by Sumitomo M Ltd.) Shell 06-5A0-008 Model JZSP-CSI0--E JZSP-CSI0--E JZSP-CSI0--E 0 Cable (Ivory) SSRFPVV-SB AWG#8 P UL076 VW-SC 4 L (6. Dia.) Cable Length m m m -M Screws, Depth 5 Nameplate Dia. Wire Markers Cable with Loose Wires at One End for CN Connection Diagram of JZSP-CSI0- -E Cable Pin No (5) Digital Operator Converter Cable for CN (Model: JZSP-CVS05-A-E) A converter cable is required to use series digital operators (model: JUSP-OP05A) for series PACKs. External Dimensions (Units: mm) (.7) (9.5) PACK End Wire Marking Signal Color /BK+(/SO+) /BK (/SO ) ALM+ ALM 5 +4VIN P-OT N-OT /DEC /EXT /EXT /EXT /SI0 Blue Blue Pink Pink Green Green Orange Orange Gray Gray Blue Blue Pink BAT + Green BAT Green SG Pink PAO Orange /PAO Orange PBO Gray /PBO Gray PCO Blue /PCO Blue /SO+ Pink /SO Pink /SO+ Green /SO Green (9) Color 04 Dots (5) (4. Dia) JZSP-CVS05-A-E Host Controller End Lead Marker Represents twisted-pair wires. (8) () M- Type PACKs Connector: HDR-E4MAG+(Honda Tsushin Kogyo Co., Ltd.) Case: HDR-E4LPA5(Honda Tsushin Kogyo Co., Ltd.) 57 Connector (4-pole) 04-60PL (Sumitomo M Ltd.) Cover FA45806 (Yasco Components Co., Ltd.) Connector (4-pole) HDR-E4MAG+ (Honda Tsushin Kogyo Co., Ltd.) Cover HDR-E4LPA5 (Honda Tsushin Kogyo Co., Ltd.) 78

9 Selecting Cables (6) Cable for Analog Monitor for CN5 (Model: JZSP-CA0-E) External Dimensions (Units: mm) Socket DF-4DS-C Contact DF-48SCF White : Manufactured by Hirose Electric Corporation. View from Cable End Pin No. Cable Color Signal Standard Settings Analog Monitor Motor speed : V/000 min - White Analog Monitor, 4 ( cables) GND(0V) Torque reference : V/00 rated torque Note : The specifications above are factory settings. Monitor specifications can be changed by changing parameters Pn006 and Pn007. (7) MECHATROLINK- Communications Cable for CN6 (Model: JEPMC-W600- -E) External Dimensions (Units: mm) Cable with Connectors at Both Ends (8) MECHATROLINK- Communications Cable for CN6 (Model: JEPMC-W600- -E) External Dimensions (Units: mm) Cable with Connectors at Both Ends (with Ferrite Core) L L Model JEPMC-W600-A5-E JEPMC-W600-0-E JEPMC-W600-0-E JEPMC-W E JEPMC-W600-0-E JEPMC-W600-0-E JEPMC-W600-0-E JEPMC-W E JEPMC-W E Cable Length(L) Model JEPMC-W600-A5-E JEPMC-W600-0-E JEPMC-W600-0-E JEPMC-W E JEPMC-W600-0-E JEPMC-W600-0-E JEPMC-W600-0-E JEPMC-W E JEPMC-W E Cable Length (L) IMPORTANT Use a MECHATROLINK- communications cable specified by Yaskawa. When using other cables, noise resistance may be reduced, and operation cannot be guaranteed. (9) MECHATROLINK- Terminator for CN6 (Model : JEPMC-W60-E) External Dimensions (Units: mm) (8) 46 79

10 M- Type PACKs SGDV- /5 Selecting Cables (0) Connection Cable for Personal Computer for CN7 (Model: JZSP-CVS06-0-E) External Dimensions (Units: mm), to 0 JZSP-CVS06-0-E (00) (55) IMPORTANT Use a cable specified by Yaskawa. When using other cables, operation cannot be guaranteed. () Cable with Connector for CN8 (Model: JZSP-CVH0-0-E) External Dimensions (Units: mm) () Pin No. Signal Lead Color Marking Color Not used (0) (8) Not used Connector Kit (Tyco Electronics AMP K.K.) () /HWBB White 4 /HWBB White 5 /HWBB Gray 6 /HWBB Gray 7 EDM Orange 8 EDM Orange M- Type PACKs 80

4th digit. 5th+6th digits. 7th digit. Specifications. 8th+9th+10th digits Options (hardware)* 4. Interface

4th digit. 5th+6th digits. 7th digit. Specifications. 8th+9th+10th digits Options (hardware)* 4. Interface MECHATROLINK- Communications Reference Type PACKs SGDV- (For Rotary Servomotors) SGDV- 5 (For Linear Servomotors) Designations S G D V - R70 A A 000 00 0 v Series SGDV PACK st+nd+ rd digits 4th digit 5th+6th

More information

(For Linear Servomotors) S G D V - R70 A 21 A th digit. 7th digit. 5th6th digits

(For Linear Servomotors) S G D V - R70 A 21 A th digit. 7th digit. 5th6th digits MECHATROLINK- Communications Reference Type PACKs SGDV- (For Rotary Servomotors) SGDV- 5 (For Linear Servomotors) Designations S G D V - R70 A A 000 00 0 v Series SGDV PACK st+nd+ rd digits 4th digit 5th6th

More information

(For Rotary Servomotors) (For Linear Servomotors) SGDV - R70 A 01 B Voltage Interface 100 VAC 200 VAC 400 VAC V (Three Phase)

(For Rotary Servomotors) (For Linear Servomotors) SGDV - R70 A 01 B Voltage Interface 100 VAC 200 VAC 400 VAC V (Three Phase) MECHATROLINK-III Communications Reference Type s SGDV- (For Rotary Servomotors) SGDV- (For Linear Servomotors) Designations SGDV - R70 A 0 B 00000 Options vseries SGDV Code 00000 Base-mounted, varbish(standard)

More information

SGDV- E5 (For Linear Servomotors)

SGDV- E5 (For Linear Servomotors) PACKs with Additional Options SGDV- E (For Rotary Servomotors) SGDV- E5 (For Linear Servomotors) Model Designations SGDV- R70 A E A 000 00 0 v Series SGDV PACK Current Voltage 00 V 400 V Code Applicable

More information

SGDV- 01 SGDV- 05. Analog Voltage/Pulse Train Reference Type SERVOPACKs. (For Rotary Servomotors) (For Linear Servomotors)

SGDV- 01 SGDV- 05. Analog Voltage/Pulse Train Reference Type SERVOPACKs. (For Rotary Servomotors) (For Linear Servomotors) Analog Voltage/Pulse Train Reference Type PACKs SGDV- 0 (For Rotary Servomotors) SGDV- 0 (For Linear Servomotors) Model Designations S G D V - R70 A 0 A 000 00 0 v Series SGDV PACK st+nd+ rd digits th

More information

(For Rotary Servomotors)

(For Rotary Servomotors) MECHATROLINK-III Communications Reference SERVOPACKs SGDV- E2 (For Rotary Servomotors) Designations S G D V - 2R9 E 2 A 002 00 0 v Series SGDV SERVOPACKs with DC Power Input st+2nd+ 3rd digits 4th digit

More information

SERIES PRODUCT CATALOG

SERIES PRODUCT CATALOG AC SERVO DRIVES SERIES PRODUCT CATALOG s Field-Proven Performance: A Servo that Does What You Need! Certified for ISO900 and ISO400 JQA-04 JQA-EM00 Series Product Catalog s s with AC Power Input Options

More information

Analog Voltage/Pulse Train Reference Type SERVOPACKs. (For Rotary Servomotors) (For Linear Servomotors) SGDV - R70 A 01 B

Analog Voltage/Pulse Train Reference Type SERVOPACKs. (For Rotary Servomotors) (For Linear Servomotors) SGDV - R70 A 01 B Analog Voltage/Pulse Train Reference Type SERVOPACKs SGDV- 0 (For Rotary Servomotors) SGDV- 05 (For Linear Servomotors) Model Designations SGDV - R70 A 0 B 002000 Options 002000 Base-mounted, varbish(standard)

More information

AC SERVO DRIVES SERIES. Servopacks. Certified for ISO9001 and ISO14001

AC SERVO DRIVES SERIES. Servopacks. Certified for ISO9001 and ISO14001 AC SERVO DRIVES SERIES Servopacks Certified for ISO9001 and ISO14001 JQA-0422 JQA-EM0202 CONTENTS SERVOPACKs Single-axis Analog Voltage/Pulse Train Reference SERVOPACKs 326 Single-axis MECHATROLINK-II

More information

Analog Voltage Reference SERVOPACKs Pulse Train Reference SERVOPACKs. (Analog Voltage Reference) SGDV- EP1. (Pulse Train Reference)

Analog Voltage Reference SERVOPACKs Pulse Train Reference SERVOPACKs. (Analog Voltage Reference) SGDV- EP1. (Pulse Train Reference) Analog Voltage Reference SERVOPACKs Pulse Train Reference SERVOPACKs SGDV- ES (Analog Voltage Reference) SGDV- EP (Pulse Train Reference) Model Designations S G D V - 2R9 E S A 002 00 0 vseries SGDV SERVOPACKs

More information

Sigma-5 servo drive System configuration

Sigma-5 servo drive System configuration SGDV-@ Sigma- servo drive The High perfomance servo family for motion control. Compact size, reduced space and integrated MECHATROLINK-II. Advance autotuning function Enhanced vibration supression function

More information

SigmaLogic7 Compact Hardware Manual

SigmaLogic7 Compact Hardware Manual SigmaLogic7 Compact Hardware Manual Table of Contents Table of Contents Introduction. SigmaLogic7 Compact Features - - - - - - - - - - - - - - - - -3. SigmaLogic7 Compact Appearance - - - - - - - - -

More information

LARGE-CAPACITY SERIES

LARGE-CAPACITY SERIES AC SERVO DRIVES LARGE-CAPACITY SERIES V to 37 kw 4 V to 55 kw Servomotor SGMVV SERVOPACK SGDV Certified for ISO9 and ISO4 JQA-4 JQA-EM Strongest line-up ever! Newest servo drives increase speeds & improve

More information

Σ-V Series. USER'S MANUAL Design and Maintenance. AC Servodrive

Σ-V Series. USER'S MANUAL Design and Maintenance. AC Servodrive AC Servodrive Σ-V Series USER'S MANUAL Design and Maintenance Rotational Motor Analog Voltage and Pulse Train Reference SGMJV/SGMAV/SGMGV/SGMCS Servomotors SGDV SERVOPACK Outline Panel Operator Wiring

More information

Analog monitor cable. Filter Motion control unit. General purpose cable. (Refer to chapter Sigma-II rotary motors) Cables SGMGH, SGMUH, SGMSH, SGMBH

Analog monitor cable. Filter Motion control unit. General purpose cable. (Refer to chapter Sigma-II rotary motors) Cables SGMGH, SGMUH, SGMSH, SGMBH CHARGE NS A R C N B C N 4 XD-@, XD-@-E Intelligent servo drive. Integrated controller and network connectivity. NCT. Patented non-linear algorithm for tight control Very low tracking error with no overshoot

More information

Σ-V Series. USER'S MANUAL Design and Maintenance Rotational Motor Command Option Attachable Type. AC Servo Drives

Σ-V Series. USER'S MANUAL Design and Maintenance Rotational Motor Command Option Attachable Type. AC Servo Drives AC Servo Drives Σ-V Series USER'S MANUAL Design and Maintenance Rotational Motor Command Option Attachable Type SGDV SERVOPACK SGMJV/SGMAV/SGMPS/SGMGV/SGMSV/SGMCS Servomotors Outline Panel Display and

More information

AC SERVO DRIVES JUNMA SERIES D E F I JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA

AC SERVO DRIVES JUNMA SERIES D E F I JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA AC SERVO DRIVES JUNMA SERIES Pulse Reference Type Mechatrolink-II Network Type GB D E F I JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA New Servo Concept JUNMA Contents Page 2 About YASKAWA New Servo

More information

JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA AC SERVO DRIVES JUNMA SERIES. Goodwin Electronics: Tel: Web:

JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA AC SERVO DRIVES JUNMA SERIES. Goodwin Electronics: Tel: Web: AC SERO DRIES JUNMA SERIES PULSE REFERENCE TYPE MECHATROLINK-II NETWORK TYPE EN DE ES FR IT JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA New Servo Concept JUNMA Contents Page 2 About YASKAWA New Servo

More information

Σ-V Series. USER'S MANUAL Design and Maintenance Rotational Motor Command Option Attachable Type. AC Servo Drives

Σ-V Series. USER'S MANUAL Design and Maintenance Rotational Motor Command Option Attachable Type. AC Servo Drives AC Servo Drives Σ- Series SER'S ANAL Design and aintenance Rotational otor Command Option Attachable Type SGD SEROPACK SGJ/SGA/SGPS/SGG/SGS/SGCS s Outline Panel Display and Operation of Operator iring

More information

USER'S MANUAL Design and Maintenance

USER'S MANUAL Design and Maintenance AC Servo Drives DC Power Input Σ-V Series USER'S MANUAL Design and Maintenance Rotational Motor MECHATROLINK-III Communications Reference SGMMV Servomotor SGDV SERVOPACK Outline SigmaWin+ Wiring and Connection

More information

Σ-V Series USER'S MANUAL Setup Rotational Motor

Σ-V Series USER'S MANUAL Setup Rotational Motor AC Servo Drives Σ-V Series USER'S MANUAL Setup Rotational Motor SGDV SERVOPACK SGMJV/SGMAV/SGMPS/SGMGV/SGMSV/SGMCS Servomotors 1 2 3 4 Overview of Setup Installation Wiring and Connection Safety Function

More information

SGMMV. Rotary Servomotors SGMMV - A1 A 2 A 2 1. Model Designations. 6th. 5th digit. 1st+2nd digits. 7th digit. 4th digit. 3rd digit.

SGMMV. Rotary Servomotors SGMMV - A1 A 2 A 2 1. Model Designations. 6th. 5th digit. 1st+2nd digits. 7th digit. 4th digit. 3rd digit. Rotary s Model Designations - mini Series st+nd digits 3rd digit th digit th digit 6th digit 7th digit st+nd digits Rated Output th digit Design Revision Order 7th digit Options Code Code Code B3 3.3 W

More information

USER S MANUAL Design and Maintenance

USER S MANUAL Design and Maintenance AC Servo Drives -V Series USER S MANUAL Design and Maintenance Rotational Motor MECHATROLINK-II Communications Reference SGDV SERVOPACK SGMJV/SGMAV/SGMPS/SGMGV/SGMSV/SGMCS Servomotors Outline Panel Display

More information

DS2 series servo drive

DS2 series servo drive DS2 series servo drive Manual WUXI XINJE ELECTRIC CO., LTD. Data No.: SC209 20110412 1.0 2 Safety notes Confirmation Do not use the drivers that are broken, lack of parts or wrong types. Installation Make

More information

Indexer unit JUSP-NS600. System configuration. Smart and simple positioning solution.

Indexer unit JUSP-NS600. System configuration. Smart and simple positioning solution. Smart and simple positioning solution. No programming languages are required. Connects directly to the drive Allows serial network control and discrete I/O control Servo axis set-up, actuation and monitoring

More information

Copyright 2014 YASKAWA ELECTRIC CORPORATION All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or

Copyright 2014 YASKAWA ELECTRIC CORPORATION All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or Copyright 2014 YASKAWA ELECTRIC CORPORATION All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, or by any means, mechanical, electronic,

More information

Σ-V Series. USER'S MANUAL Design and Maintenance. AC Servodrive

Σ-V Series. USER'S MANUAL Design and Maintenance. AC Servodrive AC Servodrive Σ-V Series USER'S MANUAL Design and Maintenance Linear Motor Analog Voltage and Pulse Train Reference SGLGW/SGLFW/SGLTW/SGLCW Servomotors SGDV SERVOPACK Outline Panel Operator Wiring and

More information

Σ-V Series USER'S MANUAL Setup Rotational Motor

Σ-V Series USER'S MANUAL Setup Rotational Motor AC Servo Drives Σ-V Series USER'S MANUAL Setup Rotational Motor SGDV SERVOPACK SGMJV/SGMAV/SGMPS/SGMGV/SGMSV/SGMCS Servomotors 1 2 3 4 1 Overview of Setup Installation Wiring and Connection Safety Function

More information

SGDH Amplifier. Part Number Guide. Quick Reference Guide. Amplifier: SGDH - 15 A E- Motor: SGMGH - 09 A C A 6 C $10

SGDH Amplifier. Part Number Guide. Quick Reference Guide. Amplifier: SGDH - 15 A E- Motor: SGMGH - 09 A C A 6 C $10 Quick Reference Guide SGDH Amplifier $ Document TRM--SGEN 9// V..4 Yaskawa Electric America Technical Training Services Part Number Guide Norman Dr. South Waukegan, IL 685-8-YASKAWA Fax: (847) 887-785

More information

Troubleshooting Alarm Displays Warning Displays

Troubleshooting Alarm Displays Warning Displays 10 10.1 Alarm Displays............................................10-2 10.1.1 List of Alarms...................................................... 10-2 10.1.2 of Alarms............................................

More information

New Servo Concept: Junma

New Servo Concept: Junma New Servo Concept: Junma Junma uses the world s premier servo technology to provide unmatched performance with a quick and efficient setup. This totally new plug and play design concept requires no parameter

More information

6th digit. 5th digit. 4th digit. Code Specifications 3 20-bit absolute (standard) D 20-bit incremental (standard) Design Revision Order

6th digit. 5th digit. 4th digit. Code Specifications 3 20-bit absolute (standard) D 20-bit incremental (standard) Design Revision Order Rotary s Model Designations - 3 D Series st+nd digits 3rd digit th digit th digit th digit 7th digit st+nd digits Rated Output th digit Serial Encoder 7th digit Options Code 3 3 W W 9 8 W 3.3 kw.8 kw 3.9

More information

USER S MANUAL Design and Maintenance

USER S MANUAL Design and Maintenance AC Servo Drives -V Series USER S MANUAL Design and Maintenance Rotational Motor Command Option Attachable Type SGDV SERVOPACK SGMJV/SGMAV/SGMPS/SGMGV/SGMSV/SGMCS Servomotors Outline Panel Display and Operation

More information

Troubleshooting Alarm Displays Warning Displays

Troubleshooting Alarm Displays Warning Displays 8 8.1 Alarm Displays..............................................8-2 8.1.1 List of Alarms........................................................ 8-2 8.1.2 of Alarms..............................................

More information

Troubleshooting Alarm Displays Warning Displays

Troubleshooting Alarm Displays Warning Displays 9 9.1 Alarm Displays..............................................9-2 9.1.1 List of Alarms........................................................ 9-2 9.1.2 of Alarms..............................................

More information

2Encoder Cable Extension from 30 to 50 m. (Example) SGDV SERVOPACK. Servomotor. Main Circuit Cable SGMJV. Servomotor End CAUTION

2Encoder Cable Extension from 30 to 50 m. (Example) SGDV SERVOPACK. Servomotor. Main Circuit Cable SGMJV. Servomotor End CAUTION s Cables Connections Standard Wiring (Max. encoder cable length: 0 m) SGDV SERVOPACK Encoder Cable (See page.) Encoder Cable Extension from 0 to 0 m (Example) SGDV SERVOPACK Relay Encoder Cable (See page.)

More information

EDB series AC servo system

EDB series AC servo system EDB series AC servo system User s Manual V. 2.00 Estun Limited Warranty This manual does not entitle you to any rights. Estun reserves the right to change this manual without prior notice. All rights reserved.

More information

SGMJV. Rotary Servomotors SGMJV - 01 A D A 2 1. Model Designations. 2Without Gears. 1st+2nd digits. 3rd digit. 5th digit. 6th digit.

SGMJV. Rotary Servomotors SGMJV - 01 A D A 2 1. Model Designations. 2Without Gears. 1st+2nd digits. 3rd digit. 5th digit. 6th digit. Rotary s Designations 2Without s - D 2 Series st+2nd s rd 4th th th 7th st+2nd s Rated Output th Design Revision Order 7th Options Code W W C2 W 2 2 W 4 4 W W 8 7 W rd Power Supply Voltage Code th Code

More information

5th digit. 4th digit. 6th digit. Design Revision Order. Shaft End. Code Specifications

5th digit. 4th digit. 6th digit. Design Revision Order. Shaft End. Code Specifications Rotary s Designations 2Without Gears - 0 D 2 Series st+2nd digits 3rd digit 4th digit 5th digit 6th digit 7th digit st+2nd digits Rated Output 5th digit Design Revision Order 7th digit Options Code 5 50

More information

USER S MANUAL Design and Maintenance

USER S MANUAL Design and Maintenance AC Servo Drives -V Series USER S MANUAL Design and Maintenance Rotational Motor Analog Voltage and Pulse Train Reference SGDV SERVOPACK SGMJV/SGMAV/SGMPS/SGMGV/SGMSV/SGMCS Servomotors Outline Panel Operator

More information

DS2 series 220V servo driver

DS2 series 220V servo driver DS2 series 220V servo driver Fast reference manual Xinje Electronic Co.,Ltd. Serial NO.SC209 20120312 1.0 2 DS2 series 220V servo driver user manual Safety caution Confirmation when receive products DO

More information

AC Servo Motor Driver. LECYM Series

AC Servo Motor Driver. LECYM Series Doc. no. LEC-OM06903 (Doc no. JXC -OMT0064) PRODUCT NAME AC Servo Motor Driver MODEL / Series/ Product Number LECYM Series Introduction This manual describes information required for designing, testing,

More information

XtraDrive (XD-) SERIES AC SERVO DRIVER

XtraDrive (XD-) SERIES AC SERVO DRIVER XtraDrive (XD-) SERIES AC SERVO DRIVER Prior to installing the product, read these instructions thoroughly and retain for future reference. Short Form Installation Guide Catalog No. 8U0107 Revision B Introduction

More information

PRODUCT NOTE MOTION PRODUCT ENGINEERING GROUP

PRODUCT NOTE MOTION PRODUCT ENGINEERING GROUP Subject: Motion Systems using Yaskawa Servo Amplifiers with Exlar Actuators Product: Sigma amplifiers (Sigma II SGDH, Sigma III SGDS, Sigma-5 SGDV) with Exlar SR and GSX series actuators Product Line Description:

More information

G5 Series Servo System

G5 Series Servo System G5 Series Servo System Extreme mechatronics meets -Stream Automation»» Sub micron precision and ms settling time»» Motion network and safety built-in»» Double registration and full closed loop G5 Series

More information

Sigma FSP Amplifier User s Manual

Sigma FSP Amplifier User s Manual Sigma FSP Amplifier User s Manual Copyright 2006 by YEA, Yaskawa Electric America, Inc. FSP Amplifier User s Manual Catalog No.YEA-SIA-FSP-3, Revision 0 December, 2006 All rights reserved. No part of this

More information

Cable connection. Sigma-II series SERVOPACK SGDH- 200V. Ver. Servo Drive CN3 (CN10) CN1 CN2 NS500 JUSP-NS500 SERVOPACK. 200V Ver.

Cable connection. Sigma-II series SERVOPACK SGDH- 200V. Ver. Servo Drive CN3 (CN10) CN1 CN2 NS500 JUSP-NS500 SERVOPACK. 200V Ver. JUSP- unit connectivity with positioning functionality. Connects directly to the drive Simplifies distributed control and information management No programming languages are required. Various positioning

More information

SD Series. AC Spindle Motor Drives with Power Regeneration, AC Servo Drives. Speed Reference with Analog Voltage Expanded Functions

SD Series. AC Spindle Motor Drives with Power Regeneration, AC Servo Drives. Speed Reference with Analog Voltage Expanded Functions AC Spindle Motor Drives with Power Regeneration, AC Servo Drives SD Series Speed Reference with Analog Voltage Expanded Functions Power Regeneration Converter Model CACP-JU SERVOPACK Model CACR-JU Spindle

More information

Series SGDH Indexer Application Module USER'S MANUAL

Series SGDH Indexer Application Module USER'S MANUAL YASKAWA Series SGDH Indexer Application Module USER'S MANUAL MODEL: JUSP-NS600 YASKAWA MANUAL NO. SIE-C718-9 Copyright 2002 YASKAWA ELECTRIC CORPORATION All rights reserved. No part of this publication

More information

AC SERVO DRIVES SERIES. Rotary Servomotors. Certified for ISO9001 and ISO14001

AC SERVO DRIVES SERIES. Rotary Servomotors. Certified for ISO9001 and ISO14001 C SERVO DRIVES SERIES Rotary Servomotors Certified for ISO91 and ISO141 JQ-422 JQ-EM22 CONTENTS Rotary Servomotors SGMMV (ow Inertia, Ultra-small Size) 4 SGM7J (Medium Inertia, High-speed) 14 SGM7 (ow

More information

Σ-V Series. USER'S MANUAL Operation of Digital Operator Model: JUSP-OP05A-1-E. AC Servo Drives. Introduction. Parameter/Monitor Modes

Σ-V Series. USER'S MANUAL Operation of Digital Operator Model: JUSP-OP05A-1-E. AC Servo Drives. Introduction. Parameter/Monitor Modes AC Servo Drives Σ-V Series USER'S MANUAL Operation of Digital Operator Model: JUSP-OP05A-1-E Introduction Parameter/Monitor Modes Utility Function Mode Parameter Copy Mode 1 2 3 4 MANUAL NO. SIEP S800000

More information

Single-phase or three phase AC220V (-15% ~ +10%) 50 ~ 60Hz

Single-phase or three phase AC220V (-15% ~ +10%) 50 ~ 60Hz KT270-H Servo Drive Features: The use of DSP ( digital signal processor ) chip, greatly accelerating the speed of data acquisition and processing, the motor running with good performance. Application of

More information

Σ-V Series. USER'S MANUAL Design and Maintenance. AC Servo Drives. Linear Motor MECHATROLINK-II Communications Reference

Σ-V Series. USER'S MANUAL Design and Maintenance. AC Servo Drives. Linear Motor MECHATROLINK-II Communications Reference AC Servo Drives Σ-V Series USER'S MANUAL Design and Maintenance Linear Motor MECHATROLINK-II Communications Reference SGDV SERVOPACK SGLGW/SGLFW/SGLTW/SGLC/SGT Linear Servomotors Outline Panel Display

More information

USER S MANUAL Design and Maintenance

USER S MANUAL Design and Maintenance AC Servo Drives -V Series USER S MANUAL Design and Maintenance Linear Motor MECHATROLINK-III Communications Reference SGDV SERVOPACK SGLGW/SGLFW/SGLTW/SGLC/SGT Linear Servomotors Outline Panel Display

More information

Series SGDH Indexer Application Module USER'S MANUAL

Series SGDH Indexer Application Module USER'S MANUAL YASKAWA Series SGDH Indexer Application Module USER'S MANUAL MODEL: JUSP-NS600 YASKAWA MANUAL NO. SIE-C718-9B Copyright 2002 YASKAWA ELECTRIC CORPORATION All rights reserved. No part of this publication

More information

Copyright 2009 YASKAWA ELECTRIC CORPORATION

Copyright 2009 YASKAWA ELECTRIC CORPORATION AC Servo Drives Σ-V Series USER'S MANUAL EtherCAT (CoE) Network Module Model: SGDV-OCA01A Checking Products Specifications SERVOPACK Installation Wiring and Connection Operation EtherCAT Communication

More information

PKG-EML10-EDB10-CBLS System Diagram and Specifications

PKG-EML10-EDB10-CBLS System Diagram and Specifications PKG-EML10-EDB10-CBLS System Diagram and Specifications Included Components: EML-10APA22 AC Servo Motor EDB-10AMA Servo Driver BDM-GA16-05 Power Cable BMP-GA24-05 Encoder Cable EDB-BSC-CC24A Comm Cable

More information

AC Servo Motor Driver (MECHATROLINK-II type)

AC Servo Motor Driver (MECHATROLINK-II type) LEC-OM07304 (Doc No. JXC -OMT0068) (Simplified edition) PRODUCT NAME AC Servo Motor Driver (MECHATROLINK-II type) MODEL / Series / Product Number LECYM Series Contents Introduction... 6 1. Procedure before

More information

1S servo drive System configuration

1S servo drive System configuration R88D-1SN@@@-ECT Sysmac general purpose servo 23-bit resolution encoder Fast and secure screw-less push-in in all connectors Pluggable connectors for easy pre-wiring and system maintenance Direct wiring

More information

1S servo drive System configuration

1S servo drive System configuration R88D-1SN@@@-ECT 1S servo drive Sysmac general purpose servo 23-bit resolution encoder Fast and secure screw-less push-in in all connectors Pluggable connectors for easy pre-wiring and system maintenance

More information

BLuAC5 Brushless Universal Servo Amplifier

BLuAC5 Brushless Universal Servo Amplifier BLuAC5 Brushless Universal Servo Amplifier Description The BLu Series servo drives provide compact, reliable solutions for a wide range of motion applications in a variety of industries. BLu Series drives

More information

BLuAC5 Brushless Universal Servo Amplifier

BLuAC5 Brushless Universal Servo Amplifier BLuAC5 Brushless Universal Servo Amplifier Description The BLu Series servo drives provide compact, reliable solutions for a wide range of motion applications in a variety of industries. BLu Series drives

More information

USER S MANUAL For Use with Large-Capacity Models Design and Maintenance

USER S MANUAL For Use with Large-Capacity Models Design and Maintenance AC Servo Drives -V Series USER S MANUAL For Use with Large-Capacity Models Design and Maintenance Rotational Motor Command Option Attachable Type SGDV- H, - J SERVOPACK SGDV-COA Converter SGMVV Servomotor

More information

Yaskawa Electric Engineering Corporation AC SERVOPACK. EGSV3 Series. User s Manual EGSV3- Document No. ESI-M-005E <1>

Yaskawa Electric Engineering Corporation AC SERVOPACK. EGSV3 Series. User s Manual EGSV3- Document No. ESI-M-005E <1> Yaskawa Electric Engineering Corporation AC SERVOPACK EGSV3 Series User s Manual EGSV3- Document No. ESI-M-005E Copyright (c) 2014 Yaskawa Electric Engineering Corporation Reprinting or reproduction

More information

Personal computer software: CX-One. G-Series ML2 Servo drive. G-Series ML2 Servo drive ADR 1 1 ADR X X1 2 3 X X10 COM

Personal computer software: CX-One. G-Series ML2 Servo drive. G-Series ML2 Servo drive ADR 1 1 ADR X X1 2 3 X X10 COM AC SERVO D RIVER 7 AC SERVO D R IVER 7 AC SERVO D R IVER 7 AC SERVO D RIVER 7 AC SERVO D RIVER 7 RD-N@, RD-T@ -Series servo drive A compact servo drive family for motion control. Compact size and integrated

More information

Installation Servo Drive Dimensions

Installation Servo Drive Dimensions Installation Servo Drive Dimensions A B Model R88D WTA3H WTA5H A 55 160 130 50 8 149 75 5 0.8 4 1.25 WT01H WT02H WT04H A 75 160 130 63 8 149.5 75 5 1.1 8 2 WT08HH A 90 160 180 63 8 149.5 75 5 1.7 11 2

More information

Selecting Servomotor Capacity and Regenerative Capacity

Selecting Servomotor Capacity and Regenerative Capacity Selecting Servomotor Capacity and Regenerative Capacity Servomotor Capacity Selection Examples Use the AC servo drive capacity selection program SigmaJunmaSize+ to select servomotor capacity. The program

More information

AC Servo Motor Driver. LECYU Series

AC Servo Motor Driver. LECYU Series Doc. no. LEC-OM07102 PRODUCT NAME AC Servo Motor Driver MODEL / Series/ Product Number LECYU Series Introduction This manual describes information required for designing, testing, adjusting, and maintaining

More information

Integrated servo motor

Integrated servo motor R88E-AECT@, R88S-EAD@ Integrated servo motor Motor and drive integrated for space optimization Wide range of motors from 2.55 Nm to 25 Nm 3000 rpm rated speed Peak torque 300% of rated torque IP65 protection

More information

Cable connection. Sigma-II series SERVOPACK SGDH- 200V. Ver. Servo Drive CN3 (CN10) CN1 CN2 JUSP-NS500 NS500 SERVOPACK. 200V Ver.

Cable connection. Sigma-II series SERVOPACK SGDH- 200V. Ver. Servo Drive CN3 (CN10) CN1 CN2 JUSP-NS500 NS500 SERVOPACK. 200V Ver. JUS- unit connectivity with positioning functionality. Connects directly to the drive Simplifies distributed control and information management No programming languages are required. Various positioning

More information

Proposing control by a hydraulic servo and V/F inverters

Proposing control by a hydraulic servo and V/F inverters Drive Goods SSCNET III/H Analog Speed Command Unit (Number of Control Axes: Axes) [DGAF/DGAF-P0] New Product Release No. Proposing control by a hydraulic servo and V/F inverters using a SSCNET III/H compatible

More information

CL86T. 24~80VDC, 8.2A Peak, Closed-loop, No Tuning. Descriptions. Closed-loop. Stepper. Applications. Datasheet of the Closed-loop Stepper CL86T

CL86T. 24~80VDC, 8.2A Peak, Closed-loop, No Tuning. Descriptions. Closed-loop. Stepper. Applications. Datasheet of the Closed-loop Stepper CL86T CL86T Closed-loop Stepper 24~80VDC, 8.2A Peak, Closed-loop, No Tuning Closed-loop, eliminates loss of synchronization Broader operating range higher torque and higher speed Reduced motor heating and more

More information

8V General information. 2 Order data 8V

8V General information. 2 Order data 8V 8V05.00-8V05.00- General information Modular mechanical design using plug-in modules Integrated line filter Integrated braking resistor All connections are made using plug-in connectors Integrated electronic

More information

Driver Specification for Linear Motor Drive Tables

Driver Specification for Linear Motor Drive Tables Driver Specification for Linear Motor Drive Tables 355 35 2 1 3 4 NCR Specification of NCR for NT38V Low-voltage (DC24V) and compact design of 115 x 100 x 33.8 mm. It contributes to miniaturization of

More information

Σ-V Series. USER'S MANUAL Operation of Digital Operator. AC Servo Drives. Introduction. Parameter/Monitor Modes. Utility Function Mode

Σ-V Series. USER'S MANUAL Operation of Digital Operator. AC Servo Drives. Introduction. Parameter/Monitor Modes. Utility Function Mode AC Servo Drives Σ-V Series USER'S MANUAL Operation of Digital Operator SGDV SERVOPACK Introduction Parameter/Monitor Modes Utility Function Mode Parameter Copy Mode 1 2 3 4 MANUAL NO. SIEP S800000 55A

More information

Sigma-5: the 5-star servo drive

Sigma-5: the 5-star servo drive Sigma-5 The 5-star servo drive» Increases machine efficiency, performance & availability» Save time & cost» Meets demanding machine requirements Sigma-5: the 5-star servo drive It is a primary goal of

More information

Drive Safety integrated AC servo amplifier <MR-J3- S 0.1kW to 55kW> Safety logic unit <MR-J3-D05>

Drive Safety integrated AC servo amplifier <MR-J3- S 0.1kW to 55kW> Safety logic unit <MR-J3-D05> General-Purpose AC Servo MELSERVO-J3 Drive Safety integrated AC servo amplifier Safety logic unit The MR-J3- S Drive Safety integrated AC servo amplifier (SSCNET Ⅲ

More information

SilverMax Datasheet. QuickSilver Controls, Inc. NEMA 23 Servomotors.

SilverMax Datasheet. QuickSilver Controls, Inc. NEMA 23 Servomotors. SilverMax Datasheet NEMA 23 Servomotors QuickSilver Controls, Inc. www.quicksilvercontrols.com SilverMax Datasheet - NEMA 23 Servomotors 23 Frame Sizes: 23-3, 23-5, 23H-1, 23H-3, 23H-5 / Series: E, E3,

More information

Build the machine you ve dreamed of, today!

Build the machine you ve dreamed of, today! Build the machine you ve dreamed of, today! AC servo drive Sigma Five You want maximum effect quickly and easily, as does every engineer in the field. And now the series is here with the practical answer

More information

USER S MANUAL. AC Servo Drives -V Series / -V Series for Large-Capacity Models / -7 Series. Safety Module. Model: SGDV-OSA01A.

USER S MANUAL. AC Servo Drives -V Series / -V Series for Large-Capacity Models / -7 Series. Safety Module. Model: SGDV-OSA01A. AC Servo Drives -V Series / -V Series for Large-Capacity Models / -7 Series USER S MANUAL Safety Module Model: SGDV-OSA01A Checking Products Specifications SERVOPACK Installation Wiring and Connection

More information

AC SERVO DRIVES JUNMA SERIES DE ES FR IT JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA

AC SERVO DRIVES JUNMA SERIES DE ES FR IT JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA AC SERO DRIES JNMA SERIES Pulse Reference Type Mechatrolink-II Network Type EN DE ES FR IT JNMA JNMA JNMA JNMA JNMA JNMA JNMA JNMA New Servo Concept JNMA Contents Page About YASKAA New Servo Concept JNMA

More information

Series SGMBH/SGDH USER S MANUAL AC Servodrive (400 V, 22 to 55 kw) SGMBH Servomotor SGDH SERVOPACK

Series SGMBH/SGDH USER S MANUAL AC Servodrive (400 V, 22 to 55 kw) SGMBH Servomotor SGDH SERVOPACK Series SGMBH/SGDH USER S MANUAL AC Servodrive (400 V, 22 to 55 kw) SGMBH Servomotor SGDH SERVOPACK YASKAWA YASKAWA MANUAL NO. SIE-S800-32.4 Copyright 2002 YASKAWA ELECTRIC CORPORATION All rights reserved.

More information

SGMPH Gearmotors - With Incremental Encoder

SGMPH Gearmotors - With Incremental Encoder - With Incremental Encoder Rated Output : 100W, 200W, 400W, 750W, 1500W Design Features 1. Compact Fits in limited mounting space 2. Torque 40.9 to 3540in lb peak torque Cost-effective solution for low

More information

RDV-X/RDV-P Robot driver Only for pulse train control

RDV-X/RDV-P Robot driver Only for pulse train control Single axis Robot driver Only for pulse train control As the size is small and weight is light, it is easy to use in automated machinery. Features 1 Dedicated pulse train control The dedicated pulse train

More information

4th digit. 5th digit. 6th digit. Code Specifications. Design Revision Order. Code Specifications. Standard. Code Specifications

4th digit. 5th digit. 6th digit. Code Specifications. Design Revision Order. Code Specifications. Standard. Code Specifications Rotary s Model Designations - D Series st+nd digits 3rd digit th digit th digit th digit 7th digit st+nd digits Rated Output Code Specifications. kw. kw. kw. kw 3 3. kw. kw. kw 7 7. kw : vailable only

More information

Sigma II Series Servo System User s Manual

Sigma II Series Servo System User s Manual Sigma II Series Servo System User s Manual WARNING YASKAWA manufactures component parts that can be used in a wide variety of industrial applications. The selection and application of YASKAWA products

More information

Sigma-5. The 5-star servo drive.» Increases machine efficiency, performance & availability» Save time & cost» Meets demanding machine requirements

Sigma-5. The 5-star servo drive.» Increases machine efficiency, performance & availability» Save time & cost» Meets demanding machine requirements Sigma-5 The 5-star servo drive» Increases machine efficiency, performance & availability» Save time & cost» Meets demanding machine requirements Sigma-5: the 5-star servo drive It is a primary goal of

More information

AC Servo Drives -V Series/ -V Series for Large-Capacity Models USER S MANUAL. EtherCAT (CoE) Network Module

AC Servo Drives -V Series/ -V Series for Large-Capacity Models USER S MANUAL. EtherCAT (CoE) Network Module AC Servo Drives -V Series/ -V Series for Large-Capacity Models USER S MANUAL EtherCAT (CoE) Network Module Model: SGDV-OCA01A Checking Products Specifications SERVOPACK Installation Wiring and Connection

More information

Specifications of ASDA A2-E_220V Series

Specifications of ASDA A2-E_220V Series Specifications of ASDA A2-E_220V Series Power Supply 100W 200W 400W 750W 1kW 1.5kW 2kW 3kW ASDA A2-E Series 01 02 04 07 10 15 20 30 Phase / Voltage Three-phase / Single-phase 220VAC Three-phase 220VAC

More information

Fan and Pump AC Inverter

Fan and Pump AC Inverter Fan and Pump AC Inverter Key Features for Fan and Pump Applications PID and Auto Energy Saving Functions. Input Phase Loss and Output Phase Loss Protection. LCD Keypad can be used to copy parameter settings

More information

PAM & SAM System User s Manual

PAM & SAM System User s Manual PAM & SAM System User s Manual Part 5 - SAM Drive Technical Information Ordering Number: 9032 011 985 Issue November 14, 2000 This version replaces all previous versions of this document. It also replaces

More information

SGDS Sigma III Servo Amplifier User Manual for Mechatrolink-II Communications

SGDS Sigma III Servo Amplifier User Manual for Mechatrolink-II Communications SGDS Sigma III Servo Amplifier User Manual for Mechatrolink-II Communications Copyright 2004 YASKAWA ELECTRIC CORPORATION All rights reserved. No part of this publication may be reproduced, stored in a

More information

AD Series. AC Servo Drive. For the highest requirements in performance and precision

AD Series. AC Servo Drive. For the highest requirements in performance and precision Range of Performance.1 kw 7 kw (.32 33.4 ) Drastically Reduced Motor Cogging Torque Advanced Drive Technology Autotuning Built-in Programmable Sequence with max. 512 program steps and 1 positions Plug

More information

ES86 Series Closed-loop Stepper Drive + Motor System (Drive+ Motor/Encoder)

ES86 Series Closed-loop Stepper Drive + Motor System (Drive+ Motor/Encoder) ES86 Series Closed-loop Stepper Drive + Motor System (Drive+ Motor/Encoder) Traditional stepper motor drive systems operate open loop providing position control without feedback. However, because of this,

More information

JUNMA SERIES SERVO DRIVE

JUNMA SERIES SERVO DRIVE OMRON YASKAWA Motion Control B.V. Manual No. TOEP-C71080603-01-OY JUNMA SERIES SERVO DRIVE Mechatrolink-II communications type Model: SJDE- ANA-OY USER S MANUAL Copyright 2006 YASKAWA ELECTRIC CORPORATION

More information

30-80V, 8.2A Peak, No Tuning, Nulls loss of Synchronization

30-80V, 8.2A Peak, No Tuning, Nulls loss of Synchronization 2-phase Hybrid Servo Drive 30-80V, 8.2A Peak, No Tuning, Nulls loss of Synchronization Closed-loop, eliminates loss of synchronization Broader operating range higher torque and higher speed Reduced motor

More information

USER S MANUAL. OMNUC U SERIES MODELS R88M-U (AC Servo Motors) MODELS R88D-UT (AC Servo Drivers) AC SERVO MOTORS/DRIVERS (1 to 5 kw)

USER S MANUAL. OMNUC U SERIES MODELS R88M-U (AC Servo Motors) MODELS R88D-UT (AC Servo Drivers) AC SERVO MOTORS/DRIVERS (1 to 5 kw) USER S MANUAL OMNUC U SERIES MODELS R88M-U (AC Servo Motors) MODELS R88D-UT (AC Servo Drivers) AC SERVO MOTORS/DRIVERS (1 to 5 kw) Thank you for choosing this OMNUC U-series product. Proper use and handling

More information

System configuration. Ratings 400 V Class three-phase 90 to 800 kw 690 V Class three-phase 90 to 1000 kw SX-D. Frequency inverters.

System configuration. Ratings 400 V Class three-phase 90 to 800 kw 690 V Class three-phase 90 to 1000 kw SX-D. Frequency inverters. ~ ~ SX High performance Vector Control IP54 full range. Compact design & Robustness Built-in Filter according to C3 Class Built-in Fusses (From 200 kw) Safety according EN13849-1 and EN62061 standards

More information

Technical data. General specifications. Linearity error ± 0.1 Electrical specifications Operating voltage U B

Technical data. General specifications. Linearity error ± 0.1 Electrical specifications Operating voltage U B Model Number SYNCHRON SERIELLES INTERFACE Features Very small housing Up to 32 Bit multiturn SSI interface Free of wear magnetic sampling High resolution and accuracy Description The ENA36IL series are

More information

AV-300i Specifications. Saftronics Inc. PC10 Product Specifications PC10. Mini Vector AC Drive

AV-300i Specifications. Saftronics Inc.  PC10 Product Specifications PC10. Mini Vector AC Drive Saftronics Inc. www.saftronics.com TM AV-300i Specifications PC10 Product Specifications PC10 Mini Vector AC Drive 1 (1) T hree-phas e 230V input Drive Hp 1/8 1/4 1/2 1 2 3 5 7.5 10 Nominal applicable

More information