CAT 5e UTP Cable: NETSET BOX [305m], indoor

Size: px

Start display at page:

Download "CAT 5e UTP Cable: NETSET BOX [305m], indoor"

Magnus Miller
5 years ago
Views:

Code: E08_05 CAT 5e UTP Cable: NETSET BOX [05m], indoor NETSET BOX UTP 5e Ethernet cable far exceeds the requirements for Category 5e twisted pair cables.

Dimensions of the box: height - 5 cm, width - 0 cm, depth - 5 cm Close-up of the cable NETSET BOX UTP CAT 5e E08 cable is the highest-quality twisted pair cable designed for data transmission systems

1 Code: E08_05 CAT 5e UTP Cable: NETSET BOX [05m], indoor NETSET BOX UTP 5e Ethernet cable far exceeds the requirements for Category 5e twisted pair cables. View of the cable box - inside 05m of the cable. Dimensions of the box: height - 5 cm, width - 0 cm, depth - 5 cm Close-up of the cable NETSET BOX UTP CAT 5e E08 cable is the highest-quality twisted pair cable designed for data transmission systems inside buildings (LANs). NETSET BOX is the latest generation of NETSET twisted-pair cables. Its outer diameter has been reduced to 5.0 mm, which considerably facilitates installation of the data cable in trays and pipes. Special insulation material has been selected to make it easier to put on RJ-5 connectors. Distinguishing features of NETSET BOX cable E08: highest-quality materials, strict technological discipline confirmed by a 5-year quality guarantee; parameters far exceeding the requirements for Category 5e; preliminary quality control of materials and thorough tests of the final product; meter markers, deviation less than 0.5%; 05 m unreel box; solid wires of 0.50 mm diameter ( AWG);

2 wire insulation made of homogeneous, highly-insulating, volume-colored PE; outer diameter: 0.88 mm; colors: white-green/green, white-orange/orange, white-brown/brown, white-blue/blue; insulated wires twisted in pairs of.8 mm diameter; pairs twisted together, outer diameter ~.0 mm; sheath made of gray PVC (RAL 70), outer diameter of 5.0 mm. NETSET E08 LAN cable is manufactured in compliance with: IEC (000), ISO/IEC 80 (000), ANSI/TIA/EIA-568-A (995), EN 507 (999), yd/t09-00 standards. NETSET cables come with a 5-year warranty. The manufacturer guarantees stability of the parameters given in the "Specifications" at least for 5 years, on the condition that the cable is packed, transported, installed, and used according to adequate European standards (among others E-7900 and EN 507-), within the permissible environmental conditions (see the "Specifications" below). The NETSET E08 cable can be used in a wide temperature range: -0 o C o C, and installed between 0 o C and +50 o C. Minimum bending radius factor (radius to diameter ratio) is 8. Specifications Name NETSET BOX UTP 5e Code Conductors Wire insulation Structure E08 solid copper wires Ø 0.50 mm ( AWG) Sheath/jacket PVC (gray, RAL 70) Outer diameter [mm] 5.0 ±0. Copper content [kg/km].9 Weight [kg/km] 8.5 Electrical parameters Wave impedance [Ω] 00 ±5 Capacitance of any transmission path at khz [nf/km] Nominal Velocity of Propagation (NVP) [%] Resistance of any transmission path [Ω/km] Asymmetry in capacitance of transmission paths to the ground [pf/km] PE 50 ± Insulation resistance [MΩ/km] > 500 Installation and operation Operating temperature range [ o C] Operating humidity range [%] Installation temperature range [ o C]

3 Minimum bending radius [radius to >8 diameter ratio] NETSET BOX UTP CAT 5e cable has been tested by Central Chamber for Telecommunications Testing of National Institute of Telecommunications in Warsaw, Poland and got CERTIFICATE OF THE INSTITUTE The Certificate of National Institute of Telecommunications for NETSET BOX UTP CAT5e cable is available here. The results of NETSET BOX UTP CAT 5e tests performed by National Institute of Telecommunications in Warsaw resistance testing. Wire Wire resistance [Ω/km] Resistance asymetry [%] CAT 5e UTP Cable: NETSET BOX [05m], indoor a 9.6 b 9.8 a 9.7 b 9, a 9.8 b 9,7 a 9. b 9. Required Capacitance testing. Capacitance [nf/km] Capacitance asymmetry [pf/km] Required Insulation testing. Wire Insulation resistance [MΩ/km] a b a b a

4 b 5, 0 5 a b Required Tests of electric strength of insulation. Test voltage [VAC] Applied Required End-to-end attenuation testing. Attenuation [db].6.8. Required -. Near End Cross Talk (NEXT) testing. to pair NEXT [db] Required -.0 Return loss testing. Return loss [db] Required - 9. Total Near End Cross Talk (PS-NEXT) testing. PS-NEXT [db] 6.9

5 Required -.0 Transmission parameters NETSET BOX UTP 5e cable far exceeds the requirements for Category 5e twisted pair cables. Price for 05m (000 feet) in unreel box 5

NETWORK CONNECTIVITY SYSTEMS

NETWORK CONNECTIVITY SYSTEMS Installation Cable KS-STP Category 7 Installation Cable Certificates 10GBaseT FTP Category 6 Installation Cable UTP Category 6 Installation Cable UTP Category 5E Installation