COMPREHENSIVE VALVE OFFERINGS AND AUTOMATION SERVICES
|
|
- Byron Copeland
- 6 years ago
- Views:
Transcription
1 COMPREHENSIVE VALVE OFFERINGS AND AUTOMATION SERVICES
2 Edgen Murray is a global stocking distributor for reputable and quality valve and valve automation brands. With over 30 years of valve experience, we leverage our strategic supply relationships and technical knowledge to provide application specific solutions for our customers MRO and project valve requirements. Through our global vendor network, we are able to source commodity grade valves, as well as engineered valves to support a wide variety of oil and gas applications. OUR DEDICATED VALVE TEAM PROVIDES OUR CUSTOMERS WITH COMPLETE TURNKEY PROJECT MANAGEMENT SOLUTIONS, INCLUDING: Technical consultation and valve design Complete supply chain management Sourcing from preferred manufacturers Readily available stock in strategic global locations Product modifications including automation, custom coating, stem extensions and pups Documentation such as technical drawings, MTRs, and IOMs Tagging and preservation ISO 9001:2008
3 VALVES BY APPLICATION We have extensive knowledge of supplying valves for oil and gas applications. The chart below illustrates which valves are best suited for particular applications. Oil and Gas Production Transmission Gathering Refining Petrochemical LNG LPG Power Pulp and Paper Marine Mining Ball Valves / API-6D Gates, Globes and Check Valves Forged / Cast Steel / Alloy Knife Gates and Slurry Valves Butterfly Resilient Seated / High Performance / Triple Offset Valves Plug Valves API 6-D Gate Valves API 6-D Check Valves Wafer Check Valves Needle Valves Automation and Controls
4 FULL SERVICE VALVE AUTOMATION Edgen Murray provides full automation packages built to customer specifications. Assembly can be performed at our automation facility, offsite, or in the field by our experienced service technicians. We are proud to offer quality products and services that meet our customer s project-specific needs. Our valve automation team works closely with our customers and provides assistance in selecting the correct valve design and components to meet the necessary requirements. We support this inhouse with highly skilled technicians who provide actuator sizing, CAD drawings, and schematics. In addition, our service technicians are available to perform maintenance and assist with start-up and commissioning procedures as needed.
5 ACTUATION BRAND Rotork Bettis Ledeen TYPE Pneumatic / Hydraulic / Electric Actuators Pneumatic / Hydraulic Actuators Pneumatic / Hydraulic / Electric Actuators Westlock Limit Switches and Positioners Moniteur Limit Switches and Positioners Topworx Limit Switches and Positioners Siemens Positioners Versa Solenoid Valves and Accessories ASCO Solenoid Valves and Accessories Numatics Solenoid Valves and Accessories Parker Filters, Regulators and Compression Fittings Fisher Filters and Regulators Control Air Filters and Regulators Welker High- Filters Swagelok Compression Fittings
6 VALVE OFFERING At Edgen Murray, we meet all of your valve requirements and are able to accommodate special requests for certain brands, sizes and materials. Through our global vendor network, we partner with leading valve manufacturers to ensure that our products meet your expectations. Some of the products we supply include (but are not limited to): BALL VALVES WKM 310 1/4-8 x psi THD / RF / RTJ RF / RTJ Cameron T API ,000 RF / RTJ / WE / RFxWE / RTJxWE Grove B4 2-4 RF / RTJ / WE / RFxWE / RTJxWE B RF / RTJ / WE / RFxWE / RTJxWE TK OF & MF 1 1/2-36 RF / RTJ / WE / RFxWE / RTJxWE TBV /1100 Cryogenic 1/4-3 THD / SW / BW / THDxSW 21/80 Semi-trunnion RF Flanged /1800 Cryogenic 1/2-12 RF Flanged 2000, 21/ , 21/2800 Cryogenic 1/2-8 RF Flanged RF Flanged Nutron T3 1/ psi THD / SW / THDxSW T3 1/2-4 x 3 RF / RTJ / THDxRF / THDxRTJ B3 1 1/2-6 x psi THD / SW Orbit T3, T4, T7, T8 Rising Stem Ball Valve 1-30 RF / RTJ / WE / RFxWE / RTJxWE
7 BALL VALVES KF/Circor A, AH, C, CH, CXH, E, EC, EH, AF, AFH, CF, CFH, CFXH psi THD / SW / Grooved B, BH 1/ psi THD / SW HB-600, HC-710, HC-730, HC-740, HS-810, HS-820, W 1/ CWP THD / SW / Seal Welded F, FE 1-8 RF Flanged / RTJ P3, M RF Flanged / RTJ WB 8-48 ANSI 300 ANSI 600 RF Flanged / WE PBV 5800, Piece 2-12 RTJ / RF Flanged 5700, Piece 2-56 API 6A ,000 RF / RTJ / WE / RFxWE / RTJ x WE Quadrant S3, S6 1/ CWP THD / SW / MxF Apollo 70, 73, 76 2-Piece 1/ psi THD / SW 82, 83A, 86A 3-Piece 1/ psi THD / SW 90, 93, 96 Uni-Body 1/ psi THD / SW 87A,88A,88L 1/2-12 ANSI RF Flanged Top-Entry 1/2-12 1/2-8 ANSI ANSI 600 RF / THD / SW / BW Shipham BA 1/4-14 THD / SW / RF / FF BT Mounted 2-20 RF / FF Chromatic HCV / 1-24 ANSI DOV 1-24 FCV / 1-24 EBV / 2-20
8 GATE, GLOBE & CHECK VALVES Bonney Forge Forged / Cast Steel / Alloy Forged Steel Cast Steel 1/ CLASS CLASS RF / RTJ / THD / SW / BW RP&C Forged Steel Valves Forged Steel 1/4-3 CLASS THD / FLANGED / SW / BW Newco Valves Forged / Cast Steel Cast Steel Forged Steel /2-2 CLASS CLASS RF / RTJ / THD / SW / BW Seal 2-36 CLASS DSI Cast Steel 2-72 CLASS RF / RTJ / FF Forged Steel 1/4-2 CLASS RF / RTJ / THD / SW / BW Seal 2-24 CLASS Walworth Cast Steel 2-36 CLASS Goodwin Wafer Check Valves BR BRF Wafer Retainerless Flanged Retainerless RF / RTJ / FF / BW RF / RTJ / FF / BW Shipham GA Gate 1/4-42 THD / SW / RF / FF GL Globe 1/4-16 THD / SW / RF / FF WC Wafer Check 2-42 Wafer / W Lugged / Dbl Flg SC Swing Check 1/4-24 CLASS THD / SW / RF / FF LC Lift Check 1/2-6 THD / SW / RF / FF Crane Wafer Check Valves G Wafer Style 2-88 CLASS RF / FF / RTJ / WE / Hub End H Lug Style 2-88 CLASS RF / FF / RTJ / WE / Hub End X Extended Body Wafer CLASS RF / FF / RTJ / WE / Hub End Stockham Bronze Angle / 1/4-4 CLASS THD / SOLDER / RF / FF Iron 1/4-24 CLASS THD / RF / FF
9 BUTTERFLY VALVES WKM DynaCentric High Performance 2 1/2-36 Wafer & Lug Body Styles WKM TOV Triple Offset ANSI Lug Body Styles 4-60 ANSI 600 Lug Body Styles 4-36 ANSI 900 Lug Body Styles 4-24 ANSI 1500 Lug Body Styles Demco NE-C & NF-C Resilient Seat psi or 285 psi Wafer & Lug Body Styles NE-I Resilient Seat psi or 285 psi Wafer & Lug Body Styles NE-D Resilient Seat psi or 285 psi Wafer & Lug Body Styles Shipham BU Double / Triple Offset 2-26 Wafer / W Lugged / Dbl Flg Crane / Stockham LD & LG Resilient Seat CWP Wafer & Lug Body Styles CWP Wafer & Lug Body Styles API-6-D GATE VALVES WKM POW-R-SEAL Expanding Gate 2-36 RF / RTJ / WE SAF-T-SEAL Slab Gate 2-36 RF / RTJ / WE Walworth API-6-D Gate Valves Expanding Gate 2-48 RF / RTJ / WE API-6-D Gate Valves Slab Gate 2-48 RF / RTJ / WE PLUG VALVES Nordstrom Dynamic Balanced Lubricated 1-30 API 3000 / 5000 RF / RTJ / SW / BW Iron Nordstrom Lubricated 1/ CWP CWP THD / Flanged Super Nordstrom Lubricated 1/2-36 API 2000 / 3000 / 5000 RF / RTJ / SW / BW
10 NEEDLE VALVES Anderson Greenwood H1 Needle Valve 1/ psi FNPTxFNPT / MNPTxFNPT / SW H7 Needle Valve 1/4-1/ psi FNPTxFNPT / MNPTxFNPT / SW H71 Needle Valve 1/4-1/2 10,000 psi FNPTxFNPT / MNPTxFNPT / SW M5 Multi-Port Gage Valve 1/2 MNPT x (3) 1/2 FNPT 6000 psi MNPTxFNPT 3/4 MNPT x (3) 1/2 FNPT M51 Multi-Port Gage Valve 1/2 MNPT x (3) 1/2 FNPT 10,000 psi MNPTxFNPT 3/4 MNPT x (3) 1/2 FNPT M9 Needle Valve 1/2 MNPT x 1/2 FNPT 6000 psi MNPTxFNPT / MNPTxMNPT 1/2 MNPT x 1/2 MNPT 3/4 MNPT x 1/2 FNPT MANUAL OPERATORS Dynatorque Products DT BG Worm Gears Bevel Gears up to 300,000 in-lbs up to 150,000 lbs thrust SD / SRD Manual Overrides up to 260,000 in-lbs MaxTorque LW Worm Gears 20,000 in-lbs - 80,000 in-lbs BW Worm Gears 160,000 in-lbs - 800,000 in-lbs MW Worm Gears 1,200,000 in-lbs - 11,200,000 in-ibs Rotork AB Worm Gears up to 283,200 in-lbs IW Worm Gears up to 7,552,680 in-lbs ILGD / ILGS Manual Overrides up to 283,200 in-lbs Babbitt Sprocket Rims CIRG / DIRG /ARG Cast Iron, Ductile Iron, and Aluminum Chain Wheel Operators 2-36 Handwheels Chain Away Safety Chain Holder N/A
11 VALVE SALES & STOCKING LOCATIONS HOUSTON, TX Richmond Avenue, Suite 900 (Sales) Houston, TX Phone: Fax: Breen Road (Stock) Houston, TX Phone: Fax: BROUSSARD, LA HENDERSON, CO 204 Milestone Road (Sales / Stock) Broussard, LA Phone: Fax: East 96 th Avenue (Sales / Stock) Henderson, CO Phone: Fax: BRIDGEPORT, OH National Road (Sales / Stock) Bridgeport, OH Phone: Fax: VALVE ACTUATION CENTER HOUSTON, TX 8300 Breen Road Houston, TX Phone: Fax: ISO 9001:2008 CERTIFIED View all our global locations at:
12
Valve Expertise The broadest portfolio of valves. The most comprehensive life cycle programs.
Valve Expertise The broadest portfolio of valves. The most comprehensive life cycle programs. Wherever you are, we re there with the products, people, and services you need. Discover the products, the
More informationw w w.fastwell.in CATALOG NUMBER FFI -1005
A trusted name in industrial valve company CATALOG NUMBER FFI -1005 Fastwell Fitting Industries is headquartered in Bakersfeld, California. We are a global manufacturer and supplier of valves to Oil &
More informationWe Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your and Fitting Needs C&C strives to earn your business by offering an extensive line of high quality products with a proven track record for successful
More informationCHINA ZHEJIANG ZHONGGONG VALVE GROUP CO,.LTD FORMEN VALVE
INTERNATIONAL SALES: FORMEN VALVE ADD: OUBEI TOWN, YONGJIA COUNTY, WENZHOU, ZHEJIANG, CHINA HEADQUARTER: ZHEJIANG ZHONGGONG VALVE GROUP ADD: WUXING INDUSTRY ZONE, OUBEI TOWN, WENZHOU, CHINA ABOUT US Formen
More informationLEADING THE WAY IN WELLHEAD AND PIPELINE TECHNOLOGY. Wellheads Christmas Trees Gate Valves Surface Safety Valves Frac Trees Check Valves
LEADING THE WAY IN WELLHEAD AND PIPELINE TECHNOLOGY Wellheads Christmas Trees Gate Valves Surface Safety Valves Frac Trees Check Valves OUR Stream-Flo Industries Ltd. is committed to provide premium quality
More information1
[Type text] www.upstreamflowsolutions.com 1 Upstream Flow Solutions evolved as a solution focused company targeting only the midstream and upstream sectors of the oil & gas industry from drilling operations
More informationGWC Italia. Proven technology for individual valve solutions worldwide. pb-1009
GWC Italia Proven technology for individual valve solutions worldwide pb-1009 GWC ITALIA Proven technology for individual valve solutions worldwide GWC Italia Worldwide Network italy group HEADQUARTERS,
More informationTailor Made. Create your unique subsea valve
Tailor Made Create your unique subsea valve Our engineers have developed a comprehensive range of subsea valves, operators and hydraulic actuators to deliver complete tailor made packages meeting the highest
More informationTel : +31 (0) Fax: +31 (0)
Maverick Valves BV Jan van Galenstrt 17 3115 JG Schiedam The Netherlands Tel : +31 (0)10 303 2620 Fax: +31 (0)10 303 2670 info@maverickvalves.com www.maverickvalves.com THIS DOCUMENT AND THE INFORMATION
More informationSAMAMAT FLOW CONTROL L.L.C.
SAMAMAT FLOW CONTROL L.L.C. SFC-MK-LS-001 Rev.: 03 COMPANY PROFILE Company Location Company Information Company Size Nearest Transportation Company Name SAMAMAT FLOW CONTROL L.L.C Company Address Plot
More informationTECHNOLOGY FOR PROFESSIONALS VALVES WORLDWIDE
QUALITY SWISS TECHNOLOGY FOR PROFESSIONALS VALVES WORLDWIDE Auffallend unauffällig Conspicuously inconspicuous our valves unsere Armaturen Content History of Zuercher Technik 4 Who we are? 6 Our core
More informationSAUSALITO-MARIN CITY SANITARY DISTRICT MISCELLANEOUS UPGRADES PROJECT. Addendum No. 2
SAUSALITO-MARIN CITY SANITARY DISTRICT MISCELLANEOUS UPGRADES PROJECT Addendum No. 2 The following shall modify the Contract Documents. The work shall be accomplished in accordance with such modifications.
More informationBronze Ball Valves. Ball-Grooved Box Qty. 1 1 Above with 2 internal Case Qty. 4 4 Supervisory Switches Unit Weight
FIRE PROTECTION VALVES FPP-0118 Effective January 1, 2018 Supercedes FPP-0717 of July 24, 2017 Prices and MTO status subject to change without notice. Visit our website for the most current information.
More informationbronze ball valves Ball-Grooved Box Qty. 1 1 Above with 2 internal Case Qty. 4 4 Supervisory Switches Unit Weight
fire protection valves FPP-0312 Effective March 26, 2012 Supercedes FPP-0611 of June 1, 2011 Prices and MTO status subject to change without notice. Visit our website for the most current information.
More informationBronze Ball Valves. Ball-Grooved Box Qty. 1 1 Above with 2 internal Case Qty. 4 4 Supervisory Switches Unit Weight
FIRE PROTECTION VALVES FPP-0115 Effective January 19, 2015 Supercedes FPP-0114 of January 6, 2014 Prices and MTO status subject to change without notice. Visit our website for the most current information.
More informationThis specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface.
SPEC-3500 1/9 1.0 PURPOSE This specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface. Note: This specification does
More informationValves. Copyright 2007 Fluor Corporation. Lesson Objective. Lesson Objective. Introduction To Valves
Copyright 2007 Fluor Corporation Valves Lesson Objective Lesson Objective Introduction To Valves Basic Types of Valves Flow Characteristics Gate Valve Relief Valve Globe Valve Horizontal Lift Check Valve
More informationRAISING PERFORMANCE. TOGETHER
FLOW EQUIPMENT LEADERSHIP RAISING PERFORMANCE. TOGETHER 2 It is my privilege to serve at the helm of Cameron. As a leading provider of flow equipment products, systems and services, everyone in our organization
More informationThis specification describes the minimum requirements for piping systems for the following service:
SPEC-3004 1/7 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Service Water Design Conditions Operating Conditions 10 PSIG @ 33 o F to
More informationThis specification describes the minimum requirements for piping systems for the following service:
201/11/2 1/9 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Underground Service Water Note: This specification does not apply to piping
More information.1 Materials and installation for steel piping, valves and fittings for hydronic systems in building services piping..2 Related Sections.
Issued 2006/08/01 Section 15183 Hydronic Systems: Steel Page 1 of 6 PART 1 GENERAL 1.1 SUMMARY.1 Section Includes..1 Materials and installation for steel piping, valves and fittings for hydronic systems
More informationYour Global Sales Partner
Your Global Sales Partner www.techlineint.com THE TECHLINE COMMITMENT As a leader in global sourcing since 1982, we are dedicated to placing the world s manufacturing capabilities within the grasp of our
More informationSLIDE GATE. The MU series is used mainly in water treatment, irrigation, hydraulic works and hydro-electric power plants.
SLIDE GATE The model is a rectangular penstock suitable for wall and thimble mounting, with a resilient sealing member applied to all 4 sides. There are two different designs, which are size dependent,
More informationEdward Valves Flow Control Solutions
Edward Valves Flow Control Solutions World s leading supplier of gate, globe and check valves Proven leading supplier of critical application valves for power generation plants Experience In Motion A History
More information4CONTROL VALVES CONTROL VALVES ULTRAFLO BUTTERFLY VALVES 522 SERIES NEW! H2X E2X KMSC-0 SPECIFICATIONS
SERIES DESRIPTION The Series resilient seated butterfly valves are available in "-0" sizes. Economical and designed to meet todayʼs HV and industrial process requirements, they come standard with full
More informationINVICTA PENSTOCK SOLUTIONS PENSTOCK SOLUTIONS
INVICTA PENSTOCK SOLUTIONS PENSTOCK SOLUTIONS INVICTA PENSTOCK RANGE Invicta is a well established, service driven company offering complete valve, penstock and actuator solutions. Invicta Valves was formed
More informationRaising Performance Together In the Oil & Gas Industry
Raising Performance Together In the Oil & Gas Industry Flanges, Bw Fittings, Valves, Pipes, Gaskets, Studbolts, Isolation Joints, Pig Launcher Receivers. C O M P A N Y P R O F I L E HISTORY NECO GOLD GROUP
More informationMueller Gas Products. Mueller H17800 Curb Stop Tee No Blo Curb Stop Tee Weld x Weld 1440 PSI
Mueller Gas Products Distributed by: Mountain States Pipe and Supply Colorado Springs, Colorado 80903 1 800 777 7173 Mueller H17800 Curb Stop Tee No Blo Curb Stop Tee Weld x Weld 1440 PSI MUELLER NO-BLO
More informationFisher 667 Diaphragm Actuators Size 80 and 100
Instruction Manual 667 Size 80 and 100 Actuators Fisher 667 Diaphragm Actuators Size 80 and 100 Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications... 2 Maximum Pressure Limitations...
More informationAVK PENSTOCK SOLUTIONS PENSTOCK SOLUTIONS
AVK PENSTOCK SOLUTIONS PENSTOCK SOLUTIONS AVK PENSTOCK RANGE AVK UK is part of the globally renowned AVK group who are based in over 85 countries and are known as one of the leading innovators and manufacturers
More informationReliance SG800 Series Steel Water Gage Valves
Installation, Operation, & Maintenance Instructions R500.541D1 10/16/2016 Reliance SG800 Series Steel Water Gage Valves Note: Design variations in Steel Water Gage Valves necessitate typical illustrations,
More informationCONSTRUCTION MATERIALS SERVICE CONDITIONS. Alternative alloy materials, like AISI 904L or DUPLEX stainless steel, are available if required.
SLIDE GATE The model is a rectangular penstock suitable for wall and thimble mounting, with a resilient sealing member applied to all 4 sides. There are two different designs, which are size dependent,
More informationBRAND INDIA ENGINEERING E-CATALOGUE
Date: 12-09-2018 GREATWELD ENGINEERING PVT.LTD. B1 6 2nd floor Kunal Puram Opp Atlas Capco Mumbai Pune road Dapodi Pune 411 012 Maharashtra India PUNE PIN - 411 012 SUHAS N BADDI PHONE - +91 20 30648055
More informationPioneers in Gate Design
Stop Logs Pioneers in Gate Design Hydro Gate 3888 E. 45th Ave. #120 Denver, CO 80216 Your Source for Water Control Gates No matter what type of gates your project demands, chances are excellent Hydro Gate
More informationFeatures. Continuous Duty Cycle Actuators
Features Predictable life. Continuous operation. Oil lubricated. High mechanical and thermal efficiency 2 models available. Capacity 3,500 to 27,000 pounds Available with C-Face motor adaptors and speed
More informationParts Manual 881 Hay Hiker
Parts Manual 881 Hay Hiker Part Number K20393P-06 IMPORTANT: ALL ITEMS ARE IDENTIFIED WITH A PART NUMBER. Some of the smaller parts such as bolts, nuts, washers, etc. are not all shown, however, the quantity
More informationCONSTRUCTION MATERIALS
CHANNEL GATE The model is a rectangular penstock designed for open channel installation. A resilient sealing feature is incorporated on 3 sides, (both laterals and bottom), resulting in a perfect seal
More informationTable Of Contents Casing Head 02 Christmas Tree & Tubing Head Tubing Spool 04 Contact Us
Table Of Contents Casing Head 02 Christmas Tree & Tubing Head 03 Tubing Spool 04 Contact Us 05 1 www.sapwellsglobal.com Casing Head Specialized large-diameter pipe lowered into an open hole and cemented
More informationParts Manual. Field-Pro Heavy Harrow Bar. Part Number H
Parts Manual Field-Pro Heavy Harrow Bar Part Number H28542-04 IMPORTANT: ALL ITEMS ARE IDENTIFIED WITH A PART NUMBER. Some of the smaller parts such as bolts, nuts, washers, etc. are not all shown, however,
More informationCM-1258Y-SD Concrete Mixer
Form No. 3421-382 Rev A CM-1258Y-SD Concrete Mixer Model No. 68011 Serial No. 402000000 and Up Register at www.toro.com. Original Instructions (EN) *3421-382* A Ordering Replacement Parts To order replacement
More informationEN 1092 PN 10 EN 1092 PN 16 JIS B K ANSI B16.5 Class 150 ANSI B16.47 Class 150 BS 10 Table D
HG EN 1092 PN 10 EN 1092 PN 16 JIS 2238 10K ANSI 16.5 Class 150 ANSI 16.47 Class 150 S 10 Table D Stafsjö s knife gate valve HG is a bi-directional valve, particularly well suited for severe operating
More informationAdding Value to Your Valves
Adding Value to Your Valves BETTIS EI-O-MATIC HYTORK SHAFER DANTORQUE Valve Automation EMERSON. CONSIDER IT SOLVED. ADDRESS 13078 84th Ave, Surrey, BC Canada V3W 1L2 CONTACT T (604) 594 3461 F (604) 599
More informationThis specification describes the minimum requirements for piping systems for the following service:
201/01/13 1/ 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Service Air Design Conditions Operating Conditions Blast Air (see Note 1)
More informationBAR STOCK 1-PC BALL VALVE SCREWED END TO BS21, ANSI B2.1 MODEL: BV-45C 2-PC INVESTMENT CASTING BALL VALVE BALL VALVE FULL PORT 1000 WOG/PN63.
BAR STOCK 1-PC DIN-259. REDUCING BORE. 800 WOG. BODY: AISI 316 / AISI 304 BAR STOCK 1-PC DIN-259. REDUCING BORE. 800 WOG. BODY: CARBON STEEL S45C 1-PC INVESTMENT CASTING HEXAGON TYPE REDUCING BORE 1000
More informationLCSF Low Clearance Split Frame
Designed For Portability And Limited Clearance Full Range 2in - 48in for Pipe and Tube Optional Bridge Slide for Heavy Wall Pipe EXTERNALLY MOUNTED PORTABLE PIPE CUTTING AND BEVELING SYSTEM E.H. Wachs
More informationC H O K E / / VA LV E C O N T R O L / /
C H O K E / / VA LV E C O N T R O L / / 2 0 1 2 EXPERIENCE, DEDICATION AND VISION Introducing Forum Energy Technologies a global provider of manufactured technologies and applied products and services.
More informationSECTION BASIC MATERIALS AND METHODS
SECTION 15050 BASIC MATERIALS AND METHODS PART 1 - GENERAL 1.01 SECTION INCLUDES A. Pipe and Fittings. 1.02 RELATED SECTIONS A. Basic Mechanical Requirements: Section 15010. B. Supports, Anchors, and Seals:
More informationPENSTOCK VALVES. Performance through Excellence
VALVES & MANUFACTURING (1988) LTD. PENSTOCK VALVES Performance through Excellence SLIDEGATES WEIR GATES STOP LOGS SLIDEGATES PRECISION FACE SEALING VALVES WEIR GATES STOP LOGS SLIDEGATES Actuation Installation
More informationMATERIAL COMBINATION NUMBER 2: Corrosive environment requiring harder, wear-resistant seating faces and resistance to dezincification.
Cast Iron Slide Gates Spec Sheet General The contractor shall furnish and install the following cast iron slide gate assemblies as listed on the Gate Schedule and detailed on the manufacturer s drawings.
More informationEngineering Design & Power Training Institute
Engineering Design & Power Training Institute Recognition & Approvals Association of Power & Design Engineers (APDE) An ISO 9001: 2008 Certified Institute Courses P G Diploma in Piping Design & Details
More informationThis specification describes the minimum requirements for piping systems for the following service:
SPEC-3501 1/ 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Instrument Air Design Conditions 150 PSIG @ 180 F Operating Conditions 125
More informationWorld Class Fabrication and Machining Parts to Finished Assemblies
- Woman Owned Small Business - World Class Fabrication and Machining Parts to Finished Assemblies FABRICATION MACHINING POWDER COATING WET PAINTING PLATE PROCESSING WELDING FABRICATION MACHINING POWDER
More informationHow to Identify a PBM VALVE SERIES
How to Identify a PBM VALVE SERIES Series 0 (SP, DP, MP) 1. If it is a manual valve, the handle generally would be made of a cast iron or cast bronze. 2. If it is a manual valve, the stem at the very top
More informationIndustrial Mechanic (Millwright) On-the-Job Training Guide
Industrial Mechanic (Millwright) On-the-Job Training Guide Industrial Mechanics (Millwright) install, maintain and repair machinery in factories, mines and production facilities. Training Requirements:
More informationMECHANICAL ENGINEERING FUNDAMENTALS Training Duration 5 days
Training Title MECHANICAL ENGINEERING FUNDAMENTALS Training Duration 5 days Training Dates & Venue REF ME091 Mechanical Engineering Fundamentals 5 28 Aug 01 Sep $4,250 Abu Dhabi, UAE Training will be held
More information100% POSITIVE ISOLATION
100% POSITIVE ISOLATION ONIS Quick-Action Line Blind outperforms conventional blind solution: spectacle, slip and figure-8 blinds 1 up to 52 150# up to 2500# -155 F/-104 C up to 1400 F/760 C Improve Safety
More informationMEDIUM DUTY CAST IRON SLIDE GATES SERIES 20-10C
MEDIUM DUTY CAST IRON SLIDE GATES SERIES 20-10C Revised October 2007 Armtec reserves the right to alter designs. General The Armtec Sluice Gate is a quality and highly economical gate for a variety of
More informationHYDRONIC PIPING
SECTION 23 21 13 HYDRONIC PIPING PART 1 GENERAL 1.01 SECTION INCLUDES A. Hydronic system requirements. B. Heating water piping, above grade. C. Chilled water piping, above grade. D. Condenser water piping,
More informationAT200 External Mount Magnetostrictive Level Transmitter
Data sheet DS/AT200-EN Rev. W AT200 External Mount Magnetostrictive Level Transmitter High accuracy liquid level and interface level detection K-TEK Level Products Measurement made easy Features Certified
More informationFisher 1052 Size 20 Diaphragm Rotary Actuator with H Mounting Adaptation
Instruction Manual 1052 Size 20 Actuator (H) Fisher 1052 Size 20 Diaphragm Rotary Actuator with H Mounting Adaptation Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications...
More informationElectric Actuator. of innovated design. Introducing KIMAX CONTROLS INC. > Patented switch of manual & Motor operation. Clutchless manualoverride.
CONTROLS INC. Introducing KIMAX CONTROLS INC. Kimax Taiwan : 5F-10,No.3, Lane 2, First Industrial Rd., Taichung Taiwan, 40767 Tel:886-4-23507533 Fax:886-4-23507531 E-mail:eric-shia@kimax.com.tw Kimax China
More informationCentrifugal Casting Machine Company, Inc.
Centrifugal Casting Machine Company, Inc. The world leader in centrifugal casting and permanent mold technology Est. 1940 Art the The Centrifugal Casting Machine Company, Inc. (CCMCO) is the established
More informationBONOMI NORTH AMERICA SERIES 500N - 500S
BOI RTH AERICA SERIES 500N - 500S NYON COATED DISC CF SS DISC anually operated butterfly valves. Epoxy coated cast iron wafer body. Full port sizes / to. EPD resilient seat -0 F to 50 F. API609 face to
More informationWORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES
EUROPEAN PRECISION & QUALITY WORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES EUROPEAN PRECISION & QUALITY With
More informationAC/DC 24 V, 50/60 Hz. Functional data Variable Settings. DC V, max. 0.5 ma. End point DC V... 4 ma ma Non-variable
echnical data sheet S--MF- Multifunctional rotary actuator for butterfly valves orque 00 Nm Nominal volta e V Control: ontrol configurable confi urable Position feedback: configurable Auxiliary u iliary
More informationPROCHEM INSTRUMENTATION. Product solutions for a world of difference BUTECH PIPING PRODUCTS INSTRUMENTATION VALVES MANUFACTURING
PROCHEM Product solutions for a world of difference PIPING PRODUCTS VALVES MANUFACTURING INDENT & PROJECT SERVICES HYDRAULIC The World of Prochem PIPING PRODUCTS VALVES MANUFACTURING INDENT & PROJECT SERVICES
More informationW-K-M Model MA-1 DynaCentric Butterfly Valve
Page 1 of 16 R E P A I R M A N U A L W-K-M Model MA-1 DynaCentric Butterfly Valve Page 2 of 16 Published October 2001 W-K-M and DynaCentric are trademarks of Cooper Cameron Corporation Cooper Cameron Corporation,
More informationBefore demand beyond supply
Before demand beyond supply Medium & high-pressure valves in accordance with ASME, EN, BS and API 2 The company and its history The history of HP Valves goes back as far as 1879 when Dikkers Hengelo began
More informationCustomer Drawings Product Selection
Customer Drawings Product Bulletin Customer Drawings Product Selection Emerson offers a wide selection of drawing products; to include 2D drawings, 3D models, CAD files and Dimensional Data for Piping
More informationIntroduction... 2 Scope of Manual... 2 Description... 2 Specifications Installation... 2 Actuator Mounting... 3 Loading Connection...
Instruction Manual Form 1909 February 1999 Type 657 Sizes 80 & 100 Introduction.............................. 2 Scope of Manual............................. 2 Description..................................
More information1 ZSI Product Experience Examples
www.zsind.com 1 ZSI Product Experience Examples www.zsind.com 2 Casting and machining (1) 1 Material: Grey Iron GG25 Process: Sand Casting Vacuum Pump 2 Material: Cast Iron GG25, GGG40 Process: Sand Casting
More informationPRODUCTS & SERVICES GUIDE
PRODUCTS & SERVICES GUIDE IT S YOUR MOVE. 2 ROCKFORD BALL SCREW ABOUT US Ian McBain founded Rockford Ball Screw (RBS) in 1973 utilizing his years of experience in the industry with the goals of providing
More informationMBC /602(L) MBC /602(L) MBC /602(L)
GasMultiBloc Combined servo pressure regulator and safety shut-off valves MBC-... 1000/60(L) MBC-... 500/60(L) MBC-... 4000/60(L) Two normally closed automatic shutoff valves and servo regulator in one
More informationThreaded Products Gaskets & Seals Precision Machining
Threaded Products Gaskets & Seals Precision Machining FIRST CALL, ONLY CALL Dan-Loc Group was formed with the merger of Texthread, Dan-Loc Bolt & Gasket, and Spensall. Dan-Loc Group is a manufacturer and
More informationEngineering Data Single Reduction Parts List Item # Description Basic Single Reduction Unit 1. Gear Housing 2. Pipe Plug 3. Vent Plug 4. Splash Guard
Engineering Data Single Reduction Parts List Item # Description Basic Single Reduction Unit 1. Gear Housing 2. Pipe Plug 3. Vent Plug 4. Splash Guard 5. Input Cover 6. O-Ring 7. Hex Head Cap Screw 8. Input
More informationPNEUMATIC, ELECTRO-PNEUMATIC & SMART DIGITAL.
PNEUMATIC, ELECTRO-PNEUMATIC & SMART DIGITAL www.unitorq.com UT-1000 Electro-Pneumatic Positioners Linear & Rotary Unmatched Stability in Tough Environments. UniTorq s advanced-control electro-pneumatic
More informationFisher 657 Diaphragm Actuators Size 80 and 100
Instruction Manual 657 Size 80 and 100 Actuators Fisher 657 Diaphragm Actuators Size 80 and 100 Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications... 3 Installation... 3 Actuator
More informationStandard Horizontal Subsea Trees. Integrated offshore offering for reliable, high-quality, and capitalefficient
Standard Horizontal Subsea Trees Integrated offshore offering for reliable, high-quality, and capitalefficient performance Standard Horizontal Subsea Trees Through standardized processes, common core components,
More informationReliance SG777 Series Steel Water Gage Valves
Installation, Operation, & Maintenance Instructions R500.SG777 10/16/2016 Reliance SG777 Series Steel Water Gage Valves Note: Design variations in Steel Water Gage Valves necessitate typical illustrations,
More informationDescription Cast Device Box, Height Inch; Width 2.81 Inch; Depth 2.69 Inch; Capacity 25 Cu Inch; 1 Gang; 2 Hub(S); Hub Location End;
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 1100 1G Mall Box Appleton/Oz Gedney Catalog Number 1100 Manufacturer Appleton/Oz Gedney Description Cast Device Box, Height
More information1 1/2 IN GATE VALVE, TAG:X326DU , 800# SW, BODY: FS ASTM A105, 316/STEL SEATS NACE, IN ACCORDANCE WIT
line_track part qty part_narr Pallet Number P00094 X328GV-0191-1 1/2 4 1 1/2 IN GATE 1500# SW 321 SS, 347/STEL SEATS E026 P00051 X328DD-01269091-1 1/2 3 1 1/2 IN GATE 1500# SW STL, F6/STEL SEATS H2 NACE
More informationApplication for design registration
Avis au lecteur sur l accessibilité : Ce document est conforme au standard du gouvernement du Québec SGQRI 008-02 afin d être accessible à toute personne handicapée ou non. Toutes les notices entre accolades
More informationSection Heavy Duty Slide Gates Tender No. [ ] Page 1
Tender No. [ ] Page 1 1.0 GENERAL 1.1 REFERENCES.1 Provide heavy duty slide gates in accordance with the following standards (latest revision) except where specified otherwise..2 American Society for Testing
More informationAPI 6D MV7-F MV7-P GATE VALVE FABRICATED BODY MV7-C GATE VALVES API 6D THROUGH-CONDUIT GATE VALVES THROUGH-CONDUIT GATE VALVE FORGED BODY GATE VALVE
I MV7-F GATE VALVE FORGED BODY MV7-P GATE VALVE FABRICATED BODY MV7-C GATE VALVE CAST BODY DUIT GATE VALVES DBB BALL VALVES CRYOGENIC HIGH MILAN API 6D API 6DSS API 6A API 17D BALL VALVES H TEMPERATURE
More informationADDENDUM NO. 1 TO THE CONTRACT DOCUMENTS AND SPECIFICATIONS DATED JULY 2017 FLORIDA GOVERNMENTAL UTILITY AUTHORITY PROJECT NO.
ADDENDUM NO. 1 TO THE CONTRACT DOCUMENTS AND SPECIFICATIONS DATED JULY 2017 FLORIDA GOVERNMENTAL UTILITY AUTHORITY PROJECT NO. PS 061 SEVEN SPRINGS WASTEWATER TREATMENT FACILITY IMPROVEMENTS PASCO COUNTY,
More informationUSER INSTRUCTIONS. Limitorque TM SR Series. Installation Operation Maintenance. Experience In Motion FCD LMENIM AQ 11/14
USER INSTRUCTIONS Limitorque TM SR Series FCD LMENIM3701-00-AQ /14 Installation Operation Maintenance Experience In Motion Contents 1 Introduction 4 1.1 Purpose 4 1.2 User Safety 4 2 Inspection, Installation
More informationSeries E2000P. Electrical linear actuator. Features SPECIFICATION. Valve Division Wörth am Main. A. Hock MSR- und Electronic Service GmbH
A. Hock MSR- und Electronic Service GmbH Valve Division Series E2000P Electrical linear actuator SPECIFICATION The cover and switching mechanism design of the linear actuators for a wider range of applications,
More informationGENERAL PROVISIONS OF THE SPECIFICATIONS MATERIAL SPECIFICATIONS LIST
GENERAL PROVISIONS OF THE SPECIFICATIONS MATERIAL SPECIFICATIONS LIST 1a. PIPE (PVCO): P.W. Eagle 200 PSI in accordance with AWWA C909. Use class 200 unless otherwise approved. Water Pipe Main Diameter
More informationGeneral Four-Way Operation, Maintenance & Service Manual
General Four-Way Operation, Maintenance & Service Manual SCOPE Included in the following pages you will find assembly drawings, exploded views, parts lists, assembly tips, operational descriptions and
More informationValve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator
Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator ANSI version Application Control valves designed for mechanical and plant engineering. Suitable for liquids, gases and steam
More informationSLIDE GATE SERVICE CONDITIONS
SLIDE GATE The model is a 4 side sealing slide gate designed for wall mounting. It is used mainly in water treatment, irrigation, hydraulic works and hydroelectric power plants. There are two different
More informationTPV 1200 BTB. Variable Displacement Closed Loop System Axial Piston Compact Tandem Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 160 / 0516 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationPROTEM Tube and pipe beveling ID CLAMPING BEVELING MACHINES FOR TUBES, PIPES AND BOILER TUBES
PROTEM Tube and pipe beveling ID CLAMPING BEVELING MACHINES FOR TUBES, PIPES AND BOILER TUBES US-40 PRACTICAL TOOLS INC. P.O. Box 233 Aurora, ON L4G 3H3, Canada Phone: 905-727-0014 / 888-847-8880 Fax:
More informationUS80 ID CLAMPING PORTABLE TUBE AND PIPE BEVELING MACHINE TUBE AND PIPE BEVELING MACHINE
TUBE AND PIPE BEVELING MACHINE ID CLAMPING PORTABLE TUBE AND PIPE BEVELING MACHINE PRACTICAL TOOLS INC. P.O. Box 233 Aurora, ON L4G 3H3, Canada Phone: 905-727-0014 / 888-847-8880 Fax: 905-727-8483 info@practicaltoolsinc.com
More informationFigure 3. 1 ½ Nutating Disc with R-10 register
Principle of Operation Liquid enters a precision-machined chamber containing a disc which nutates (wobbles). The position of the disc divides the chamber into compartments containing an exact volume. Liquid
More informationSPLIT FRAME CUTTING & BEVELING MACHINES
SPLIT FRAME CUTTING & BEVELING MACHINES 1-48 WWW.BBPIPETOOLS.COM 713-747-8502 B&B Pipe & Industrial Tools 527 Michigan St South Houston, TX 77587 SPLIT FRAME CUTTING & BEVELING Portable O/D Locking Cold
More informationCollet Closer & Tailstock Options
Collet Closer & Tailstock Options Fail-Safe Collet Closers Spring-close, air-to-open for fail-safe operation (85psi max) Part remains clamped even if loss of air should occur Non-adjustable grip force
More informationStandard Subsea Wellheads. Integrated offshore offering for reliable, high-quality, and capital-efficient performance
Standard Subsea Wellheads Integrated offshore offering for reliable, high-quality, and capital-efficient performance Standard Subsea Wellheads Through standardized processes, common core components, and
More informationKEEP YOUR RESOURCE MOVING.
LINER BOLTS KEEP YOUR RESOURCE MOVING. COLUMBUS McKINNON CORPORATION Leading the Industry Downtime in the grinding mill operation is caused by one of two things: regularly scheduled maintenance or unscheduled
More informationComplete O.D. Machining in One Operation
MFDODM209 Complete O.D. Machining in One Operation Including: Hydra-Drive For Extreme Accuracy CREATING INNOVATIONS IN FACE DRIVING TECHNOLOGY www.facedrivers.com Complete O.D. Machining in one Operation
More information