INSTRUCTION MANUAL. MARINE RADAR MR-1200R (Radome type) MR-1200T (Open array type; 4 kw) MR-1200T (Open array type; 6 kw)

Size: px
Start display at page:

Download "INSTRUCTION MANUAL. MARINE RADAR MR-1200R (Radome type) MR-1200T (Open array type; 4 kw) MR-1200T (Open array type; 6 kw)"

Transcription

1 INSTRUCTION MANUAL MARINE RADAR MR-1200R (Radome type) MR-1200T (Open array type; 4 kw) MR-1200T (Open array type; 6 kw)

2 SYSTEM COMPONENTS MODEL NAME LCD DISPLAY SCANNER UNIT MR-1200RII MR-1200TII MR-1200TIII SX-3230 (12.1-inch LCD) EX-2714 (Radome type) EX-2780 (Open array type; 4 kw) EX-2780 (Open array type; 6 kw) SUPPLIED ACCESSORIES EX-2714 (Radome type unit) Qty. q System cable (15 m)... 1 w Installation bolts (M10 50)... 4 e Installation bolts (M10 25)... 4 r Installation nuts (M10)... 4 t Flat washers (M10)... 4 y Spring washers (M10)... 4 EX-2780 (Open array type unit) Qty. q System cable (20 m)... 1 w Installation bolts (M10 40)... 4 e Installation nuts (M10)... 4 r Flat washers (M10)... 4 t Spring washers (M10)... 4 y Allen wrench... 1 u Cap bolts (M8 18 mm)... 4 i Belleville washers (8L)... 4 o Sealing washers (T)... 4!0 Flat washers (M8)... 4!1 Flat washers (AW)... 4!2 Ferrite EMI filter... 1 SX-3230 (12.1-inch LCD display unit) Qty. q Front cover... 1 w NMEA connector (PLT-167-P-R)... 1 e NMEA connector (PLT-168-P-R)... 1 r Spare fuse (FGB 15 A)... 1 t Spare fuse (FGB 5 A: for over 24 V power supply)... 1 y DC power cable... 1 u Mounting bracket... 1 i Mounting knob bolts... 2 o Installation bolts (M6 30)... 5!0 Installation nuts (M6)... 5!1 Spring washers (M6)... 10!2 Flat washers (M6)... 10!3 Instruction manual... 1!4 Operating guide... 1 i

3 The MR-1200RII/TII/TIII are supplemental aids to navigation and are not intended to be a substitute for accurate and current nautical charts. FOREWORD Thank you for purchasing Icom s MR-1200RII/TII/TIII marine radar. The radar is designed especially for fishing boats. It has powerful transmitting power, a 12.1-inch LCD display and many other advanced features. If you have any questions regarding the operation of the radar, contact your nearest authorized Icom Inc. dealer. IMPORTANT READ THIS INSTRUCTION MANUAL CAREFULLY before attempting to operate the radar. SAVE THIS INSTRUCTION MANUAL. This manual contains important safety and operating instructions for the MR-1200RII/TII/TIII. BE CAREFUL! SART signals may not be detected and may not be displayed on the screen depending on the SEA, RAIN or IR settings. Follow the settings as below to detect the SART signals on the screen. q Select the screen range between 6 NM to 12 NM with [+/ ]. (p. 1) w Set the [GAIN] as high as possible. (p. 2) e Set the [SEA] to minimum. (p. 2) r Set the [RAIN] to minimum. (p. 2) t Turn OFF the [IR] function. (p. 11) y Turn OFF the [STRETCH] function. (p. 11) EXPLICIT DEFINITIONS WORD DEFINITION Personal death, serious injury or an R DANGER! explosion may occur. Personal injury, fire hazard or electric R WARNING! shock may occur. CAUTION Equipment damage may occur. If disregarded, inconvenience only. NOTE No risk of personal injury, fire or electric shock. Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia and/or other countries. ii

4 PRECAUTIONS For Display unit: R WARNING! NEVER let metal, wire or other objects touch any internal part of the display unit. This may result in an electric shock. R WARNING! NEVER apply AC voltage to the DC connector of the display unit. This may pose a fire hazard, result in an electric shock or damage the display unit. R WARNING! NEVER apply more than 42 V DC to the DC connector of the display unit. This may pose a fire hazard or damage the display unit. R WARNING! NEVER touch the display unit with wet hands. This may result in an electric shock or damage the display unit. R WARNING! NEVER open the display unit. There are no user adjustment points. This may result in an electric shock and incorrect reassembly may cause a fire hazard. CAUTION: NEVER connect the display unit to a DC power source using reverse polarity. This will damage the display unit. CAUTION: NEVER remove the fuse holder from the DC power cable. This will damage the display unit. DO NOT place the display unit in excessively dusty environments. DO NOT place the display unit near heating equipment or in direct sunlight or where hot or cold air blows directly onto it. DO NOT use or place the display unit in areas with temperature below 15 C (+5 F) or above +55 C (+131 F). DO NOT use harsh solvents such as benzine or alcohol when cleaning the display unit, as they will damage the display unit s surfaces. DO NOT place the display unit in areas that will block air passage or put anything around the display unit. This will obstruct heat dissipation. KEEP the display unit out of the reach of children. KEEP the display unit away from heavy rain, and never immerse it in the water. The display unit meets IPX4 requirements for splash resistance when the supplied connection cable, scanner unit are connected. However, if it is dropped, splash resistance cannot be guaranteed because of possible damage to the case or the waterproof seals. The LCD display may have cosmetic imperfections that appear as small dark or light spots. This is not a malfunction or defect, but a normal characteristic of LCD display. For Scanner unit: R DANGER: HIGH VOLTAGE! NEVER open the scanner unit. The scanner unit contains high voltage that could be fatal. And there are no user adjustment points. All repairs and adjustments MUST be made by a qualified electronics technician at your Marine Navigation Dealer. For qualified electronics technician only: R DANGER: HIGH VOLTAGE! High voltages of up to 3,500 volts are used in the scanner unit. Although prudent measures for safety have been adopted, sufficient care must be taken in the operation, maintenance and adjustment of the scanner unit. Electric shock of 1,000 volts or more may cause electrocution and death; even an electric shock of only 100 volts may be fatal. R DANGER: HIGH VOLTAGE! To prevent an electric shock, turn the radar s power is OFF and do not reach inside the scanner unit until you have: discharged the capacitors by disconnecting the system cable from the radar unit for 5 minutes. checked that no electric charges remain inside the device. Also, it is safest to wear dry insulated rubber gloves. NEVER use both hands simultaneously; keep one hand in your pocket. R WARNING: RADIATION HAZARD! Radiation emitted from the scanner unit can be harmful, particularly to the eyes. To avoid harmful radiation, turn the radar s power is OFF before beginning work on the scanner unit. DO NOT use or place the scanner unit in areas with temperature below 25 C ( 13 F) or above +70 C (+158 F). NEVER immerse the scanner unit in the water. The scanner units meet IPX6* requirements for highpressure water jet resistance. However, if these items are dropped, high-pressure water jet resistance cannot be guaranteed because of possible damage to the cases or the waterproof seals. * Except for the cable connectors. They meet IPX4 requirements while connecting to the radar unit. iii

5 TABLE OF CONTENTS SYSTEM COMPONENTS... i SUPPLIED ACCESSORIES... i FOREWORD... ii IMPORTANT... ii EXPLICIT DEFINITIONS... ii PRECAUTIONS... iii TABLE OF CONTENTS... iv 1 PANEL DESCRIPTION Front panel... 1 Screen MENU VIDEO MENU... 5 FUNCTION MENU... 5 ATA AIS MENU... 6 TARGET MEMU... 7 INT. SETTING MENU BASIC OPERATION Checking the installation... 8 Turning power ON/OFF... 8 Basic operation... 9 RAIN function SEA function OFF CENTER function IR function STRETCH function ZOOM function TRAILS function Power save function Ship speed indication Position indication Waypoint indication Long pulse function Bearing setting DISTANCE AND DIRECTION MEASUREMENTS Distance measurement Bearing and Distance measurement Advanced measurements ALARM FUNCTION Alarm zone setting Zone alarm setting ATA/AIS ATA (Automatic Tracking Aid) ATA settings ATA operation Plotting marks Course and speed vector Plots (ATA) AIS (Automatic Identification System) AIS settings AIS operation Status of the Vessel icon Plots (AIS) BASIC RADAR THEORY Side-lobe echoes Indirect echoes Multiple echoes Minimum range Blind and Shadow sectors Target resolution INSTALLATION AND CONNECTIONS Connecting the units Power source requirement Ground connection Installing the display unit Mounting the EX-2714 scanner unit Wiring the EX-2714 system cable Mounting the EX-2780 scanner unit Wiring the EX-2780 system cable Attaching the EX-2780 scanner unit OTHER FUNCTIONS SERVICE MAN MENU Service man menu Select the language TIMING adjustment HDG adjustment SPD adjustment RANGE selection ERROR MESSAGE Error message list AIS error message list MAINTENANCE Periodic maintenance Scanner unit maintenance Display unit maintenance Options SPECIFICATIONS EXTERNAL DATA LIST (Supplement) TEMPLATE Template for the display unit SX-3230 (Display mount bracket template) Template for the scanner unit EX-2714 EX-2780 iv

6 1 PANEL DESCRIPTION Front panel GAIN!3 POWER q!3 q MARINE RADAR MR-1200 GAIN SEA AUTO POWER TX SAVE!4!5 SEA RAIN TX SAVE + - w e!4!5 w e RAIN MOB!6 MOB r!6 r TLL TARGET TRAILS ZOOM ALM MODE OFF CENT EBL1 EBL2 VRM1 VRM2 AIS BRILL MENU HL TARGET ALM EBL1 VRM1 BRILL ZOOM OFF CENT HL OFF TRAILS MODE EBL2 VRM2 MENU t y u i o!0!7!8!9 t y u i Control panel (English) Control panel (Chinese) q POWER SWITCH [POWER]/[ ] (p. 9) Push to turn the radar power ON or OFF. The standby screen appears for 90 seconds while the magnetron warms up. The initial screen appears and a beep sounds after the power has been turned ON. w TRANSMIT/SAVE SWITCH [TX (SAVE)]/ [ ] Push to toggle between the TX mode and the standby mode. (p. 9) Hold down for 1 second to turn ON the power save function. The radar for TX interval scan is fixed at 10 revolutions. (p. 12) Select the save time in the INT. SETTING menu. e RANGE UP/ DOWN SWITCHES [+]/[ ]/ [ ]/[ ] (p. 9) Push [+] to increase the screen range. Push [ ] to decrease the screen range. r UP, DOWN, LEFT, RIGHT KEYS [p] [q] [t] [u] Set the EBLs, VRMs, alarm area, ATA target, AIS target and so on. In the Menu screen, push [p] or [q] to select the menu items, and then push [t] or [u] to select the option or set the value. In the normal operating mode, push a combination of the [p]/[t] or [p]/[u], or [q]/[t] or [q]/[u] to move the cross line cursor to the upper left or right, or lower left or right. t TRAILS SWITCH [TRAILS]/[ ] (p. 12) Push to toggle the trail function ON or OFF. This is useful for watching other ship s tracks, and approximate relative speed. Trail Time can be set in the VIDEO menu. Hold down for 1 second to output the position information where the cursor is placed, to the NMEA output terminals. TLL output requires bearing data and position data. y ZOOM FUNCTION [ZOOM]/[ ] (p. 11) Simultaneously push [TARGET]/[ ] and [TRAILS]/ [ ] to toggle the ZOOM function ON or OFF. The ZOOM function enlarges the target to two times normal size. Move the cursor to the target, then turn ON the function. The screen zooms the middle of the screen around your own ship. This function is not usable in the 1 8 and the 32 NM or higher ranges. u MODE SWITCH [MODE]/[ ] Push to select the Head-up (H UP), Course-up (C UP), North-up (N UP) or True motion (TM) screens. The North-up and Course-up screens can be selected only when a bearing data input is connected. (pp. 28, 43) The TM screen requires bearing data and LOG or position data. (pp. 28, 43) TheTM screen is not selectable in the 32 NM or higher range. 1

7 PANEL DESCRIPTION 1 i OFF CENTER FUNCTION [OFF CENT]/[ ] (p. 10) Simultaneously push [ALM]/[ ] and [MODE]/ [ ] to turn the OFF CENTER function ON or OFF. This function is usable in the 24 NM or less ranges. o EBL2 (VRM2) SWITCH [EBL2 (VRM2)]/ [ ] (pp. 15, 16) Push to display the electronic bearing line 2 (EBL2) and the variable range marker 2 (VRM2), and activate the [t] or [u] for the electronic bearing line selector and [p] or [q] for the range marker selector. When VRM1 and EBL1 ($9 %2) are displayed, the center of VRM2 appears at the intersection point of VRM1 and EBL1.!0 AIS OPERATING MODE SELECTION [AIS] (p. 24) Simultaneously push [EBL1(VRM1)]/[ ] and [EBL2(VRM2)]/[ ] to toggle between the AIS operating mode and the normal operating mode. Hold down [EBL1(VRM1)]/[ ] and [EBL2(VRM2)]/[ ] for 1 second to toggle between the AIS display ON and OFF.!1 MENU SWITCH [MENU]/[ ] (pp. 5 7) Push [MENU]/[ ] to select the VIDEO, FUNC- TION, ATA AIS, TARGET, INT. SETTING or SER- VICE MAN menus. Push [p] or [q] to select the items and push [t] or [u] to change the setting.!2 HEADING LINE OFF FUNCTION [HL OFF]/ [ ] (p. 9) While holding down [BRILL]/[ ] and [MENU]/ [ ], the heading line is temporarily turned OFF.!3 GAIN CONTROL [GAIN]/[ ] (p. 9) Adjusts the receiver amplifier gain. Clockwise rotation increases the gain. Increased gain may increase screen noise.!4 SEA CLUTTER CONTROL [SEA]/[ ] (p. 10) This function serves to eliminate echoes from waves in close range. Reduces the receiver gain for close objects within a radius of approximately 8 nautical miles to eliminate sea clutter. Rotate the control fully clockwise to activate the automatic SEA control function. The SEA indicator ( ) appears in the upper left of the screen. Under normal conditions set the SEA to minimum. Use this control with caution when the sea is rough.!5 RAIN CLUTTER CONTROL [RAIN]/[ ] (p. 10) This function eliminates echoes from rain, snow, fog, and so on. Rotate the control fully counter clockwise to deactivate the RAIN function. The RAIN indicator ( ) disappears.!6 MAN OVERBOARD [MOB]/[ ] Push to mark the man overboard point on the screen. When a crew member falls overboard, hold down [MOB]/[ ] for 1 second to display the MOB symbol ( ) on the screen. The MOB readout shows the bearing, distance and estimated time to the MOB point at the current speed. Hold down [MOB]/[ ] for 1 second to cancel the function. Position and bearing data are necessary.!7 TARGET SWITCH [TARGET]/[ ] (pp. 19, 23) Operating in the AIS mode Push to select a target. Hold down for 1 second to toggle the selected target between activated or sleeping. Operating in any other mode Push to select the desired ATA target data (1 to 10, or OFF). Hold down for 1 second to set the target as caught or released.!8 ALARM SWITCH [ALM]/[ ] (p. 17) Push [ALM]/[ ] to toggle the alarm function ON or OFF. Hold down [ALM]/[ ] for 1 second to enter the alarm area setting mode. Push [p], [q], [t] or [u] to move the cross cursor to the zone starting point, then hold down [ALM]/[ ] for 1 second. The starting ring of the zone is created. Then push [p], [q], [t] or [u] to fix the finish point, and then push [ALM]/[ ]. The desired alarm zone will automatically form.!9 EBL1 (VRM1) SWITCH [EBL1 (VRM1)]/ [ ] (pp. 15, 16) Push to display the electronic bearing line 1 (EBL1) and the variable range marker 1 (VRM1) and activate [t] or [u] for the electronic bearing line selector, and [p] or [q] for the range marker selector. EBL1 bearing and VRM1 distance are displayed in the bottom window. When EBL1 and VRM1 are displayed, the beginning of EBL2 appears at the intersection point of EBL1 and DISPLAY BRILLIANCE SWITCH [BRILL]/[ ] (p. 9) Push to increase or decrease the brilliance of the picture on the display. Hold down for 1 second to select maximum brilliance. The display color changes between green and red if you continue to hold down this key after the display is set to maximum brilliance. The brightness of the symbols, characters and illuminations can be independently adjusted in the SYMBOL, CHARACTER and KEY ILLUM of the INT. SETTING menu. 2

8 1 PANEL @9 3/4 (0.25) MTUNE TVECT 6M TRAILS NM CURS 0174 R 0649NM 005 : STW 15 7KT H UP HDG T IR ES #9 $0 $1 $2 $3 $4 $5 $6 $7 #0 #1 $8 $9 #2 %0 %1 %2 %3 %4 #3 #4 #5 #6 #7 #8 AIS GPS COMPASS EBL1 EBL2 WPT CURS ALM ZOOM VRM1 VRM2 0422NM 0242NM 0632NM 001 : 000 : 001 : N E %5 %6 %7 %8 %9 TUNING MODE INDICATOR (p. 9) M.TUNE appears when the manual tuning function is in FIXED RING RANGE READOUT (p. 14) Shows the interval range of the fixed ring. This readout appears when RING in the FUNCTION menu is turned SCREEN RANGE READOUT (p. 14) Shows the maximum range of the displayed screen. The range indicated is nautical miles SHIP SPEED READOUT (p. 13) Shows the ship speed. SOG: When GPS is selected in the INT. SETTING menu. STW: When LOG is selected in the INT. SETTING AUTO SEA INDICATOR (p. 10) Appears when the automatic SEA control function is turned LONG PULSE INDICATOR (p. 13) Appears when the long pulse is in RAIN CONTROL INDICATOR (p. 10) Appears when the RAIN function is in MODE INDICATOR Head-up, Course-up, North-up and True Motion screens are available. N UP and C UP screens require external bearing data. TM screen requires bearing data and LOG or position HEADING LINE (p. 9) The heading line indicates the ships bow direction. #0 ALARM ZONE (p. 17) Shows the alarm zone. Appears when the alarm function is in use. #1 WAYPOINT MARKER (p. 13) Shows the waypoint received from navigation equipment. This marker appears when WPT in the FUNCTION menu is turned ON. To display the waypoint marker, bearing data and NMEA data in 0183 format is necessary. (p. 43) #2 FIXED RANGE RINGS (p. 14) Shows the distance at fixed intervals. The interval distance is indicated by the ring range readout (@3). These rings appear when RING in the FUNCTION menu is turned ON. #3 AIS INDICATOR (p. 14) Appears when a valid VDM sentence is input from the NMEA (AIS) port. If more than the specified AIS signals that is set in the NUMBER OF AIS setting of the ATA AIS menu are received, this indicator changes to a reverse display ( AIS ). The indicator disappears if the AIS signal is interrupted for 6 minutes. #4 GPS INDICATOR (p. 28) Indicator appears when the NMEA (GPS) is connected.

9 PANEL DESCRIPTION 1 #5 COMPASS/GYRO INDICATOR (pp. 28, 43) GYRO: NMEA (gyro) is connected. COMPASS: NMEA (compass), N+1 or AUX data is connected. #6 EBL1/ 2 READOUTS (pp. 15, 16) Shows the bearing of the displayed Electronic Bearing Lines (EBL1 and EBL2) when EBL is in use. #7 WAYPOINT/MOB READOUTS (p. 13) Shows the bearing and distance to the waypoint received from navigation equipment. This readout appears when WPT in the FUNCTION menu is turned ON. To display the waypoint/mob marker, bearing data and NMEA data in 0183 format is necessary. (p. 43) Shows the bearing and distance to the MOB (Man Over Board) event marker. Push [MOB]/[ ] to cancel the readout and the symbol. #8 POSITION/CURSOR READOUT (p. 13) Shows your own ship or cursor latitude and longitude readout when external NMEA data in 0183 format is connected. Select SHIP or CURS in the POSN DISP item of the FUNCTION menu. To display the POSITION, NMEA 0183 is necessary. To display the CURSOR, NMEA 0183 and bearing data are necessary. #9 TUNING LEVEL INDICATOR (p. 9) Shows the receiver tuning level. $0 CURSOR INDICATOR Shows the bearing and distance to the cursor. R: Relative bearing, T: True Bearing, M: Magnetic bearing $1 VECTOR INDICATOR (p. 19) Shows the ATA, AIS and OWN vector type. T: True vector, R: Relative vector $2 VECTOR TIME INDICATOR (p. 19) Shows the vector time. Select vector time in VECT TIME of the TARGET menu. $3 TRAILS INDICATOR (p. 12) Shows the trail time. The echo remains, with gradation, during the trail time period on the screen. (Except for the trail time; ) Progressing time counter starts counting until the timer reaches the trail time. $4 HEADING INDICATOR Shows the heading bearing readout. HDG: When BRG INPUT in the INT. SETTING menu is selected NMEA, N+1 or AUX. COG: When BRG INPUT in the INT. SETTING menu is selected GPS. The HDG readout indicates the bow of the ship s bearing in a clockwise direction from north. R: Relative bearing, T: True Bearing, M: Magnetic bearing $5 IR INDICATOR (p. 11) Eliminates or reduces interference caused by other radar operating nearby. This indicator appears when IR in the VIDEO menu is set to 1 or 2. $6 ECHO STRETCH INDICATOR (p. 11) Appears when the echo stretch function is in use. This indicator appears when STRETCH in the VIDEO menu is turned ON. $7 CROSS LINE CURSOR Used to measure the bearing and distance, setting the alarm zone, selecting the ATA/AIS targets, and so on. Push [p], [q], [t] or [u] one or more times to move the cursor. $8 OWN SHIP VECTOR INDICATOR Shows the vector of your own ship. $9 VRM 1 (pp. 15, 16) %0 VRM 2 (pp. 15, 16) Used to measure distance. When a target is selected, the VRM1/2 readout (%4) shows its distance. %1 NORTH MARK The north mark shows the true north direction. %2 EBL1 (pp. 15, 16) %3 EBL2 (pp. 15, 16) Used to measure bearing. When a target is selected, the EBL readout (#6) shows its bearing. %4 VRM1/2 READOUTS (pp. 15, 16) Shows the distance of the displayed Variable Range Markers (VRM1 and VRM2) when the VRM is in use. Nautical miles (NM) or kilometers (KM) can be selected in the FUNCTION menu as the distance unit. %5 ALARM INDICATOR (p. 17) Appears when the alarm function is in use. %6 ZOOM INDICATOR (p. 11) Appears when the zoom function is in use. Push [TARGET]/[ ] and [TRAILS]/[ ] simultaneously to turn the function ON or OFF. %7 TIME INDICATOR %8 TIME INDICATOR Shows the estimated time to the marker edge from the center of the marker, at the current speed. %9 TIME INDICATOR Shows the estimated time to the waypoint at the current speed. 4

10 2 MENU The SERVICE MAN MENU is described in Section 10 SERVICE MAN MENU. Please see Section 10 for details. VIDEO MENU FUNCTION MENU VIDEO MENU FUNCTION MENU TUNE D.RANGE IR STRETCH PULSE SEA TRAIL TIME AUTO MANUAL NAR. MID. WIDE OFF 1 2 OFF ON SP LP S 15S 30S 1M 3M 6M 15M RING WPT POSN DISP DIST UNIT BRG DIRECTION ZONE ALARM BEEP OWN VECT OFF OFF SHIP NM TRUE TRUE IN OFF OFF ON ON CURS KM MAG 360 R OUT ON ON PT/SB 5 D TUNE AUTO: Automatic tuning. A.TUNE appears for approximately 2 seconds, instead of the screen display, when first transmitting after turning ON the power. The unit also retunes in some cases. MANUAL: Manual tuning. q Push [u] to select [MANUAL], then push [q] to activate the manual tuning slider. w Push [t] or [u] to adjust the desired tuning level. D D.RANGE Select the dynamic range of the PPI (Plan Position Indicator). NAR.: Narrow dynamic range. Even weak reflections are displayed as strong reflections. MID.: WIDE: D IR OFF: Mid dynamic range. Wide dynamic range. You can easily distinguish between weak reflections and strong reflections. Turn OFF the Interference Reduction function. 1 or 2 (ON): Turn ON the Interference Reduction function 1 (Low) or 2 (High). IR appears on the screen. D STRETCH OFF: Turn OFF the echo stretch function. ON: Turn ON the echo stretch function. ES appears on the screen. D PULSE SP: LP: Select the pulse width to short. Select the pulse width to long. appears on the screen. D SEA The SEA knob can be used to fine tune the sea clutter of the display after one of our main levels are selected based on the height of the antenna and sea conditions. D TRAIL TIME 6S, 15S, 30S, 1M, 3M, 6M, 15M or : Select the trail time. D RING OFF: ON: D WPT OFF: ON: Turn OFF the fixed range ring display. Turn ON the fixed range ring display. Do not display the waypoint on the screen. Display the waypoint on the screen. Waypoint, bearing and position data are required. D POSN DISP SHIP: Display your own ship s position.* 1 CURS: Display the cursor position.* 2 * 1 External latitude/longitude data required. * 2 External latitude/longitude data and bearing data required. D DIST UNIT NM: Display the distance unit in Nautical Miles. KM: Display the distance unit in Kilometers. D BRG Select the displayed bearing type, no relation with the bearing data format (NMEA, N+1, AUX or GPS). TRUE: Select the true North bearing. MAG: Select the magnetic North bearing. D DIRECTION (except HDG and CSE) (p. 15) TRUE: True or magnetic direction. 360 R: Relative direction PT/SB: Bow direction D ZONE ALARM IN: An alarm sounds when the target comes into the zone. OUT: An alarm sounds when the target goes out of the zone. D BEEP OFF: Turn OFF* the beep tone. ON: Turn ON the beep tone. * Except for the alarm function. D OWN VECT OFF: Do not display your own ship s vector. ON: Display your own ship s vector. Bearing data, position data and ship speed are required.

11 MENU 2 ATA AIS MENU ATA AIS MENU ATA OFF ON ATA No.DISP OFF SEL ALL ATA ALARM OFF ON AIS DISPLAY OFF ON AIS ALARM OFF ON AIS RANGE 8.0NM AUTO ACTIVATE 1.0NM NUMBER OF AIS 100 SLOW WARN 0.1KT LOST AIS TRGT ERASE D ATA (Automatic Tracking Aid) OFF: Turn OFF the ATA function. ON: Turn ON the ATA function. D ATA No. DISP Select the target identification number type that appears at the right side of the mark. OFF: Do not display any mark number. SEL: Display only the selected mark number. ALL: Display all mark numbers. D ATA ALARM* OFF: Turn OFF the ATA alarm function. ON: Turn ON the ATA alarm function. D AIS DISPLAY OFF: Turn OFF the AIS display. ON: Turn ON the AIS display. D AIS ALARM* OFF: Turn OFF the AIS alarm function. ON: Turn ON the AIS alarm function. * An ATA alarm or AIS alarm sounds when the CPA and TCPA reach the limit. D AIS RANGE Set the AIS display range to between 0.1 and 36.0 NM or. 0.1 to 36.0NM: Select the range from your vessel. : The received AIS information are displayed up to the NUMBER OF AIS setting. D AUTO ACTIVATE Set the distance to automatically turn the sleeping AIS target into an activated target. OFF: Turn OFF the Auto Activate function. 0.1 to 9.9NM: Select the distance from your vessel. D NUMBER OF AIS Select the maximum number of AIS targets that can be displayed on the screen to between 10 and 100 in 10 digit steps. D SLOW WARN The AIS unit calculated COG (Course Over Ground) data of a vessel that is at anchor or drifting is unreliable, and therefore the CPA (Closest Point of Approach) and TCPA (Time to CPA) data may not be correctly calculated. If a vessel is anchored in your alarm zone, the unreliable data can cause the collision alarm to sound many times, even if there is no real danger. To prevent this, when the anchored vessel s SOG (Speed Over Ground) is less than this set value, the Slow Warn function assumes that vessel s COG is fixed towards your vessel and an alarm will sound. OFF: Turn OFF the Slow Warn function. 0.1 to 4.9KT: Select the vessel s speed. D LOST AIS TRGT Erase all of the Lost targets. Push [u] to display the confirmation SURE?, then push [u] again to clear all of the Lost targets on the screen. About Lost Target : A vessel is regarded as a Lost target after a specified period of time has passed since the vessel last transmitted data, as described below. The Lost target icon disappears from the screen 6 minutes and 40 seconds after the vessel was regarded as a Lost target. The criteria to become a Lost target: Except Class B Vessel type Vessel is at anchor, moored and moving less than 3 knots Vessel is moving less than 2 Class B knots Vessel is at anchor, moored and moving more than 3 knots Except Class B Class B Vessel is moving between 0 and 14 knots Vessel is moving between 2 and 14 knots Except Class B Class B 18 min. 18 min. 1 min. N/A 1 min. 3 min. Vessel is moving between 0 and 14 knots 4 while changing course 1 min. N/A Vessel is moving between 14 and sec. knots 90 sec. Vessel is moving between 14 and sec. knots while changing course N/A 7 Vessel is moving more than 23 knots 12 sec. 30 sec. Vessel is moving more than 23 knots 8 12 sec. while changing course N/A 6

12 2 MENU TARGET MENU TARGET MENU INT. SETTING MENU INT. SETTING VECT MODE VECT TIME CPA LIMIT TCPA LIMIT TARGET TRACK TRUE 6M 1.0NM 1 M 1 M REL MAG VAR BRG INPUT SPD INPUT TX INH START TX INH ANGLE SAVE TIME SYMBOL CHARACTER KEY ILLUM AUTO MANUAL 0.0 W NMEA N+1 AUX GPS GPS LOG 0 0 1M 6M 15M 30M BRILL D VECT MODE TRUE: Select the true vector mode. REL: Select the relative vector mode. D VECT TIME Set the vector length (time) to 15 seconds, 30 seconds or 1 to 15 minutes. D CPA* LIMIT 0.1 to 10.0NM: Set the CPA (Closest Point of Approach) limit by pushing [t] or [u]. D TCPA* LIMIT 1 to 60M: Set the TCPA (Time to CPA) limit time by pushing [t] or [u]. * CPA/TCPA: Closest Point of Approach and Time to Closest Point of Approach limits are set to give a warning when a target or targets enter those limits around your own ship. D TARGET TRACK The track data is updated at this specified tracking interval. Select the track interval time between OFF, 15 seconds, 30 seconds and 1 to 15 minutes. After 5 dots are displayed, the oldest dot disappears at the time when the next dot appears. D MAG VAR AUTO: Automatically revise magnetic variations. NOTE: NMEA data is required. NEVER select AUTO without NMEA data; incorrect variation data may entered. (p. 43) MANUAL: Manually revise magnetic variation. q Push [u] to select [MANUAL], then push [q]. w Push [t] or [u] to set the revised value. D BRG INPUT NMEA: NMEA0183 bearing data format. N+1: N+1 data format. AUX: Other format. GPS: Reads NMEA0183 COG format data as HDG format. (The course may not match with other HDG format and includes error.) D SPD INPUT GPS: Use the GPS NMEA speed data. LOG: Use the speed sensor data. When BRG INPUT in the INT. SETTING menu is selected GPS, selectable option is only GPS. D TX INH START 0 to 359 : Push [t] or [u] to enter the start point of the TX inhibit area. D TX INH ANGLE 0 to 90 : Push [t] or [u] to enter the TX inhibit area. D SAVE TIME 1M, 6M, 15M or 30M: Select the standby time during the save mode. The radar for TX interval scan is fixed at 10 revolutions. D SYMBOL 1/2/3: Select the symbol brightness. (Includes AIS icons.) D CHARACTER 1/2/3: Select the character brightness. D KEY ILLUM 1/2/3/4: Select the key illumination brightness. 7

13 BASIC OPERATION 3 Checking the installation Before turning ON the power, be sure all the connections are complete. The checklist at right may be helpful for necessary confirmation. CAUTION: Connect the scanner unit before turning ON the power. Otherwise the magnetron inside the scanner unit might be damaged. Turning power ON/OFF 1 (0.25) T.VECT 6M NM CURS T 0.000NM SOG17.7KT H UP HDG253.4 T IR GPS COMPASS EBL1 EBL2 MOB REV *.* ROM OK RAM OK VRM1 VRM2 CURS N E (0.25) NM CURS STBY T.VECT 6M T 0.000NM SOG17.7KT H UP HDG253.4 T IR D Checklist q The four bolts securing the scanner unit must be firmly tightened. w Cabling must be securely attached to a mast or mounting material, and must not interfere with the rigging. e Be sure waterproofing procedures are completed on the system cable. r The power connections to the battery must be of the correct polarity. t Be sure that the plugs at the rear of the display unit have been connected correctly and securely. (See page 28 for details.) q Push [POWER]/[ ] to turn ON the power. The initial screen appears and the magnetron warm up time is counted down on the screen. The magnetron inside the scanner unit warms up for 90 seconds. [POWER]/[ ] is disabled for 2 seconds after the power is turned OFF. w When the countdown is completed, the Standby screen appears. e Push [TX]/[ ] to start scanning and select the Plan Position Indicator (PPI) screen. Targets and heading markers appear. The screen appears approximately 2 seconds after turning ON the power, when AUTO is selected in the TUNE item of the VIDEO menu. r Push [POWER]/[ ] to turn OFF the power. GPS COMPASS EBL1 EBL2 MOB VRM1 VRM2 CURS N E 8

14 3 BASIC OPERATION Basic operation r t y GAIN SEA RAIN TARGET ALM EBL1 VRM1 BRILL MOB ZOOM OFF CENT AIS HL OFF POWER TX SAVE + - TRAILS MODE EBL2 VRM2 MENU q w e u CAUTION: When setting the [SEA]/[ ] control to a fully clockwise position, close targets are blanked. r t y AIS q w e u q Turn ON the power. w Push [TX]/[ ] after the countdown disappears from the screen. See Turning power ON/OFF on page 8. e Push [+]/[ ] or [ ]/[ ] one or more times to select the display range. The screen range readout shows the maximum range of the screen. r Rotate [GAIN]/[ ] to the 1 o clock position. Clockwise rotation increases the gain. Increased gain may increase screen noise. t Rotate [SEA]/[ ] to set the sensitivity time control to minimum. y Rotate [RAIN]/[ ] to set the rain clutter control to minimum. u Push [MODE]/[ ] to select either the Head-up; H UP, Course-up; C UP, North-up; N UP or True Motion; TM screen. C UP, N UP or TM can be selected only when bearing, position or speed data is provided. (See page 43 for details) NOTE: Manual adjustment can be used. (See below.) D Heading marker The heading marker is a line that shows your ship s bow direction. (This marker will appear in the center of the screen when the Head-up screen H UP is selected.) The heading marker can be hidden when the desired target is located under the heading marker. Simultaneously hold down [BRILL]/[ ] and [MENU]/[ ] to hide the heading marker. D Fixed range rings The fixed range rings can be used for rough distance measurements. (p. 14) Push [MENU]/[ ] to open the FUNCTION menu, then push [q] to select RING. Push [u] to turn ON the ring. D Manual tuning The receiver tuning can be manually adjusted. Push [MENU]/[ ] to open the VIDEO menu, then select MANUAL. Push [q] to activate the manual tuning slider, then push [t] or [u] to set the tuning level indicator to the maximum level. (p. 5) M.TUNE appears at the top of the display. D Brilliance adjustment The intensity of the screen can be adjusted. When you require continuous operation, but not constant viewing, a lower setting can increase the life of the LCD display. Push [BRILL]/[ ] to increase or decrease the brilliance of the picture on the display. Hold down [BRILL]/[ ] for 1 second to select maximum brilliance. NOTE: High intensity will shorten the life of the LCD display. Display color Two display colors can be selected between green and red. The display color changes between green and red if you continue to hold down [BRILL]/[ ] after the display is set to maximum brilliance. Key illumination The backlighting of the keys can be adjusted for convenient operation. (p. 7) Push [MENU]/[ ] one or more times to select the INT. SETTING menu. Push [t] or [u] to select the illumination level. Key illumination corresponds with [BRILL]/[ ] control. 9

15 BASIC OPERATION 3 The following are typical basic operation examples, which may hinder radar reception (sea clutter, precipitation interference and echoes from other radar). RAIN function This function eliminates echoes from rain, snow, fog etc. Rotate the control fully counterclockwise to deactivate the control function. The RAIN indicator ( ) disappears. NOTE: DO NOT reduce the echoes too much, otherwise you may miss weaker targets. Small echoes Adjust RAIN control SEA function This function serves to eliminate echoes from waves at close range. Reduce the receiver gain for close objects within a radius of 8 NM to eliminate sea clutter. Rotate the control fully clockwise to activate the automatic control function. SEA indicator ( ) appears in the upper left corner of the screen. Echoes from sea waves Adjust SEA control WARNING: The [SEA]/[ ] control reduces the receiver sensitivity of objects within 8 NM. Therefore, caution and careful adjustment are necessary when using the [SEA]/[ ] control. Small objects may not be displayed on the screen when strong echoes from rain or islands within 1 NM while the automatic SEA function is activated. OFF CENTER function The scanning area can be shifted in a desired direction and can be partially enlarged. This is useful when Head-up* screen is selected, and you want to enlarge the bow direction display, or the center of the screen shifts in the direction of the intersection. This function is selectable in 24 NM or shorter ranges. *This function is not selectable in the TM screen. Normal screen With OFF CENTER ON q Push [p], [q], [t] or [u] to move the cursor where you want to shift the center of the screen. Maximum offset is up to 75% of the screen. w Push [ALM]/[ ] and [MODE]/[ ] simultaneously to shift the screen. e Push [ALM]/[ ] and [MODE]/[ ] simultaneously again to return to the normal screen. 10

16 3 BASIC OPERATION IR function Radar interference With IR function ON Radar interference may appear when another ship s radar is operating on the same frequency band in close proximity. The IR function can eliminate this type of interference. (p. 5) q Push [MENU]/[ ] to call up VIDEO menu. w Push [q] to select IR. e Push [t] or [u] to select IR function 1, 2 or OFF. IR appears in the upper right of the screen, when the function is activated. STRETCH function The blips can be magnified electronically for easier viewing of small targets. (p. 5) Normal screen With STRETCH ON q Push [MENU]/[ ] one or more times to select the VIDEO menu. w Push [q] to select STRETCH, then push [u] to turn ON the function. ES appears in the upper right of the screen, when the function is activated. NOTE: Turn OFF this function during normal operation. ZOOM function Normal screen With ZOOM function ON The ZOOM function expands the target to two times normal size. This function is selectable up to a 24 NM range or shorter except 1 8 NM. q Push [p], [q], [t] or [u] to move the cursor to the desired target. w Push [TARGET]/[ ] and [TRAILS]/[ ] simultaneously to toggle the ZOOM function between ON and OFF. ZOOM appears in the lower right of the screen. 11

17 BASIC OPERATION 3 TRAILS function The trails function memorizes echoes continuously or at constant intervals. This is useful for watching other ships tracks, approximately relative speed, etc. 3/4 (0.25) M.TUNE T.VECT 6M TRAILS NM CURS 0.453NM 1:0 5 STW 15.7KT H UP HDG T IR ES Trail time Power save function TRAIL indicator Trail interval counter The power save function conserves the boat s battery power by pausing the transmission. The standby (pausing) times are selectable (rotation number is fixed to 10). For example, when 1 minute is selected, the scanner rotates 10 revolutions; then stops for 1 minute, and then repeats this sequence while the power save function is activated. 1 Count down the standby time (0.25) SAVE T.VECT 6M NM CURS T 0.900NM 0:48 SOG17.7KT H UP HDG273.9 T IR ES GPS GPS COMPASS COMPASS EBL1 VRM1 EBL1 VRM1 EBL2 VRM2 EBL2 VRM2 MOB MOB CURS N E CURS N Hold down [TX] for 1 second to turn ON the SAVE function. 1 (0.25) SAVE T.VECT 6M NM CURS T 0.900NM 0:00 SOG17.7KT H UP HDG273.9 T IR ES E Scan and STBY alternates Setting the trail interval time q Push [MENU]/[ ] one or more times to select the VIDEO menu. Push [q] one or more times to select TRAIL TIME. w Push [t] or [u] to select trail interval time. 6 seconds, 15 seconds, 30 seconds, 1 minute, 3 minutes, 6 minutes, 15 minutes and (continuous) are selectable. e Push [MENU]/[ ] one or more times to exit the menu. Using the TRAILS function q Push [TRAILS]/[ ] to turn ON the trail function. TRAILS and trail interval time appears in the upper right of the screen. Trail interval counter starts to count up to the trail time. w All displayed echoes at the plotted time are memorized and displayed with a graduated intensity together with the current echoes. Echoes are displayed with minimum intensity when is selected. e Push [TRAILS]/[ ] to cancel the trail function and erase the plotted echoes. TRAILS and trail interval time disappears. D Setting the scanning standby time q Push [MENU]/[ ] one or more times to select the INT. SETTING menu. w Push [q ] one or more times to select SAVE TIME. e Push [t] or [u] to select standby time. 1, 6, 15, and 30 minutes are selectable. r Push [MENU]/[ ] one or more times to exit the menu. D Using the power save function q Hold down [TX (SAVE)]/[ ] for 1 second to turn ON the power save function. The save indicator appears in the top of the screen. w After the scanning rotations are finished, transmission and rotation are suspended until the selected standby time elapses. The display shows the last scanned echoes until the scanning restarts. SAVE and standby time appear in the top of the screen and the standby time is counted down. e After the selected standby time elapses, transmission and rotation restart. r Push [TX (SAVE)]/[ ] to cancel the power save function. The save indicator turns OFF. NOTE: When you use the power save function together with the alarm function, the LCD display is turned OFF until an object enters the programmed alarm zone, therefore, more power saving is possible. (p. 17) 12

18 3 BASIC OPERATION Ship speed indication When the ship speed data in NMEA 0183 format is applied, the radar can display the ship speed. Knots (KT) or kilometers/hour (KM/h) are automatically selected in the normal screen (p. 3) by selecting nautical miles (NM) or kilometers (KM) respectively. q Push [MENU]/[ ] one or more times to select the FUNCTION menu. w Push [q] one or more times to select DIST UNIT. e Push [t] or [u] to select the ship speed indication to NM or KM. r Push [MENU]/[ ] one or more times to exit the menu. Position indication When latitude/longitude data in NMEA 0183 format is applied, the radar can display the latitude and longitude of your ship s or cursor position in the bottom of the display. (To display the CURSOR position, bearing data is necessary.) (p. 43) q Push [MENU]/[ ] one or more times to select the FUNCTION menu. w Push [q] one or more times to select POSN DISP. e Push [t] or [u] to select the ship position or cursor position. r Push [MENU] one or more times to exit the menu. Waypoint indication When waypoint data received from navigation equipment in NMEA 0183 format is applied, the radar can display the waypoint. To display the waypoint marker, bearing data is necessary. (p. 43) q Push [MENU]/[ ] one or more times to select the FUNCTION menu. w Push [q] one or more times to select WPT. e Push [t] or [u] to turn the waypoint icon ON or OFF. r Push [MENU]/[ menu. ] one or more times to exit the Long pulse function To magnify the blips for easier viewing of small targets, the long pulse and echo stretch (p. 11) functions are usable. When the long pulse is used in the 3 4 to 3 NM range, this function magnifies target echoes to the backward direction of the target. Pulse selection q Push [MENU]/[ ] one or more times to select the VIDEO menu. (p. 5) w Push [q] one or more times to select PULSE. e Push [t] or [u] to select SP (Short Pulse) or LP (Long Pulse). When LP is selected, appears in the upper left of the screen. r Push [MENU]/[ ] one or more times to exit the menu. NOTE: To select SP (Short Pulse) increases the target distance resolution. (p. 27) Bearing setting The radar bearing interface accepts NMEA, N+1, AUX or COG data format and the bearing can use a magnetic or true north type. When a true north type bearing is used, the variation from magnetic north, etc., can be adjusted on 0.1 steps. D Setting the bearing type q Push [MENU]/[ ] one or more times to select the FUNCTION menu. w Push [q] one or more times to select BRG. e Push [t] or [u] to select magnetic or true north type. All displayed bearing readouts show the selected bearing type. D Setting the magnetic variation q Push [MENU]/[ ] one or more times to select the INT. SETTING menu. w Push [q] one or more times to select MAG VAR. e Push [t] or [u] to select an AUTO* or MANUAL variation. r When a MANUAL variation is selected, push [q], then push [t] or [u] to set the bearing variation. t Push [MENU]/[ ] one or more times to exit the menu. * NOTE: NMEA data is required for auto variation. NEVER select AUTO variation without NMEA data, incorrect variation data may entered. 13

19 DISTANCE AND DIRECTION MEASUREMENTS 4 Distance measurement TYPE RING VRM1 VRM2 DESCRIPTION Displays fixed rings. Suitable for rough estimations from your own ship to any target. Displays a variable range marker and activated by [p] or [q] for the range marker selector. Suitable for accurate measurements from your own ship to a target. Normally functions the same as VRM1. When the VRM1 and EBL1 selects a target, the center of VRM2 appears at the intersection point. Suitable for accurate measurements from target to target. Two measurement procedures can be used with this radar. Use them separately or jointly is possible. The distance unit, nautical miles (NM) or kilometers (KM) is selected in the FUNCTION menu (p. 5). D Using the fixed rings Ring range readout q Push [MENU]/[ ] one or more times to select the FUNCTION menu. (0.25) T.VECT 1 NM CURS T 0.900NM SOG 0.0KT H UP HDG w Push [q] one or more times to select RING. e Push [u] to turn ON the RING function and display IR ES the fixed rings. The interval range appears on the right of the screen range readout. The ring range is fixed depending on the screen range. (See below.) r Push [MENU]/[ ] one or more times to exit the Fixed ring menu. t To clear the fixed rings, push [t] to turn OFF the function, as described in step e above. Range (nm) Ring (nm) EBL1 EBL2 WPT VRM1 VRM2 CURS N E * NOTE: When the screen is shifted, the number of rings may differ. *Available for the MR-1200TII/TIII. Available for the MR-1200TIII only D Using the variable range marker q Push [EBL1 (VRM1)]/[ ] to display VRM1 and EBL1; then push [p] or [q] to set the marker. The range between the ship and the target is indicated in the VRM readouts. w Push [EBL2 (VRM2)]/[ ] to display VRM2 and EBL2; then push [p] or [q] to set the marker. The range between the ship and the target is indicated in VRM readouts. When VRM1 and EBL1 are displayed, the center of VRM2 appears at the intersection point of VRM1 and EBL1. The VRM2 disappears when [EBL1 (VRM1)] is pushed. e Push [EBL1 (VRM1)]/[ ] to exit the menu display. 14

20 4 DISTANCE AND DIRECTION MEASUREMENTS Bearing and Distance measurement This radar has two Electronic Bearing Lines (EBL) to indicate the target direction from your ship or a target. D Using the EBL and VRM EBL1 VRM1 VRM2 EBL2 EBL1 readout EBL2 readout VRM1 readout VRM2 readout q Push [p], [q], [t] or [u] to move the cursor onto the desired target. w Push [EBL1 (VRM1)]/[ ] to display the EBL1 and VRM1. Push [t] or [u] to rotate the electronic bearing line. Push [u] to rotate clockwise and push [t] to rotate counterclockwise. Push [p] or [q] to increase or decrease the variable range marker ring size. The EBL1 and VRM1 readouts indicate the target bearing and distance. The EBL readouts indicate the target bearing; 0 to 360 R: Relative direction, when 360 R is selected in the DIRECTION item of the FUNCTION menu. (See page 5) P/S 0 to 180 : Bow direction, when PT/SB is selected in the DIRECTION item of the FUNC- TION menu. (See page 5) 0 to 360 T*: True or magnetic bearing, when selecting TRUE in the DIRECTION item of the FUNCTION menu. (See page 5) *Bearing data is required. (p. 43) e Push [EBL1 (VRM1)]/[ ] to clear EBL1 and VRM1. Cursor remains on the display. r Push [p], [q], [t] or [u] to move the cursor onto the desired target. t Push [EBL2 (VRM2)]/[ ] to display EBL2 and VRM2 on the display. When EBL1 and VRM1 are displayed, the beginning of EBL2 and VRM2 appears at the intersection point of EBL1 and VRM1. EBL2 and VRM2 disappear when [EBL1 (VRM1)]/ [ ] is pushed. y To clear EBL1 and VRM1, push [EBL1 (VRM1)]/ [ ]. 15

21 DISTANCE AND DIRECTION MEASUREMENTS 4 Advanced measurements Using both Electronic Bearing Lines (EBL) and both Variable Range Markers (VRM), the following advanced measurements can be made: D Measuring the distance and direction between two targets EBL1 VRM1 3/4 MTUNE TVECT 3M NM CURS\ 3171 M 1141NM SOG km/h H UP HDG GPS GYRO EBL1 EBL2 WPT POSN 3211 M 0890 T VRM1 VRM2 0852NM 0814NM IR ES ALM EBL2 VRM2 q Push [p], [q], [t] or [u] to move the cursor onto the desired target. w Push [EBL1 (VRM1)]/[ ] to display the EBL1 and VRM1. Push [t] or [u] to rotate the electronic bearing line. Push [p] or [q] to increase or decrease the variable range marker ring size. e Push [EBL2 (VRM2)]/[ ] to display the EBL2 and VRM2. The intersection of the EBL1 and VRM1 becomes the center of the EBL2 and VRM2. r Push [p], [q], [t] or [u] to move the cursor onto the other target. Push [t] or [u] to rotate the electronic bearing line. Push [p] or [q] to increase or decrease the variable range marker ring size. t The VRM2 readout shows the distance between the two targets. The EBL2 readout shows the direction from one target to the other. D Measuring the relative speed and course of a target EBL1 VRM1 3/4 NM CURS\ 3171 M TVECT 6M 1141NM SOG KT H UP HDG EBL1 EBL2 WPT POSN 3211 T 1714 T VRM1 VRM2 0401NM 0184NM IR ES VRM2 EBL2 q Push [TRAILS]/[ ] (p. 12) to turn ON the TRAILS function; then wait until the trail time count up reaches to the TRAIL TIME. w Set VRM1 and EBL1 to a previously plotted target as described above. e Set VRM2 and EBL2 to the current plotted position of the same target, as described above. r The VRM2 readout is a measure of target movement which can be converted into relative target speed. For example, when a 6 minute trail time is selected, multiplying the distance by ten gives the relative average speed of the target. If your ship is stationary during the plotting time, the converted speed and direction become absolute. The converted speed unit is knots or kilometers/hour when the selected unit in the FUNCTION menu is nautical miles (NM) or kilometers (KM), respectively. t The EBL2 readout shows the course direction of the target. Measuring the distance and course from a waypoint q Display a waypoint. (See page 13) w Set VRM1 and EBL1 to the displayed waypoint targets as described above. e Set VRM2 and EBL2 to a target (e.g. the next waypoint) as described on page 15. r The VRM2 readout shows the distance to the target from the waypoint. The distance unit can be selected as nautical miles (NM) or kilometers (KM) in the FUNCTION menu. t The EBL2 readout shows the direction to the target from the waypoint. 16

INSTRUCTION MANUAL. MARINE RADAR MR-1200R (Radome type) MR-1200T (Open array type; 4 kw) MR-1200T (Open array type; 6 kw)

INSTRUCTION MANUAL. MARINE RADAR MR-1200R (Radome type) MR-1200T (Open array type; 4 kw) MR-1200T (Open array type; 6 kw) INSTRUCTION MANUAL MARINE RADAR MR-1200R (Radome type) MR-1200T (Open array type; 4 kw) MR-1200T (Open array type; 6 kw) SYSTEM COMPONENTS MODEL NAME LCD DISPLAY SCANNER UNIT MR-1200RII MR-1200TII MR-1200TIII

More information

R2009/R3016 Radar system Quick Reference Card

R2009/R3016 Radar system Quick Reference Card R2009/R3016 Radar system Quick Reference Card EN ¼¼ Note: This document covers the products: R2009 Radar system with 9 portrait display, paired with Halo, 3G, 4G or HD radar sensors. R3016 Radar system

More information

ARGUS RADAR Quick Reference Card

ARGUS RADAR Quick Reference Card ARGUS RADAR Quick Reference Card Own Ship Activated ERBL AIS Symbol ERBL 1 and 2 Helm or Antenna Position Ref. Parallel Index Status/Setup Display Presentation Transceiver Status Tuning Bar Presentation

More information

R2009/R3016 User Manual

R2009/R3016 User Manual R2009/R3016 User Manual ENGLISH navico-commercial.com Preface Disclaimer As Navico is continuously improving this product, we retain the right to make changes to the product at any time which may not

More information

ic-f1020 ic-f2020 INSTRUCTION MANUAL VHF LAND MOBILE RADIO UHF LAND MOBILE RADIO

ic-f1020 ic-f2020 INSTRUCTION MANUAL VHF LAND MOBILE RADIO UHF LAND MOBILE RADIO INSTRUCTION MANUAL VHF LAND MOBILE RADIO ic-f1020 UHF LAND MOBILE RADIO ic-f2020 This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause

More information

MA-500TR INSTRUCTION MANUAL CLASS B AIS TRANSPONDER

MA-500TR INSTRUCTION MANUAL CLASS B AIS TRANSPONDER INSTRUCTION MANUAL CLASS B AIS TRANSPONDER MA-00TR This device complies with Part 1 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. i Thank

More information

INSTRUCTION MANUAL HF AUTOMATIC TUNING ANTENNA AH-740. * The stand in the photo is not supplied with the tuning antenna.

INSTRUCTION MANUAL HF AUTOMATIC TUNING ANTENNA AH-740. * The stand in the photo is not supplied with the tuning antenna. INSTRUCTION MANUAL HF AUTOMATIC TUNING ANTENNA AH-740 * The stand in the photo is not supplied with the tuning antenna. FOREWORD Thank you for purchasing the AH-740 hf au to m at i c tuning antenna. The

More information

STRIKER Series. Owner s Manual

STRIKER Series. Owner s Manual STRIKER Series Owner s Manual Table of Contents Introduction...1 Device Keys... 1 Contacting Garmin Product Support... 1 Selecting the Transducer Type... 1 Zooming on the STRIKER 4... 1 Panning on the

More information

JMA-3300 Radar. Semi-Constaview digital signal processing inch ultra bright LCD New System-on-Chip technology

JMA-3300 Radar. Semi-Constaview digital signal processing inch ultra bright LCD New System-on-Chip technology JMA-3300 Radar JRC s new radar incorporates the latest leading technologies 10.4-inch ultra bright LCD New System-on-Chip technology Semi-Constaview digital signal processing AIS and MARPA+ as standard

More information

MARINE RADAR MODEL FR-7062/7112/7252

MARINE RADAR MODEL FR-7062/7112/7252 MARINE RADAR MODEL FR-7062/7112/7252 C Your Local Agent/Dealer 9-52, Ashihara-cho, Nishinomiya, Japan Telephone: 0798-65-2111 Telefax: 0798-65-4200 A ll rights reserved. Printed in Japan FIRST EDITION

More information

RADAR REMOTE DISPLAY MODEL FMD-811

RADAR REMOTE DISPLAY MODEL FMD-811 RADAR REMOTE DISPLAY MODEL FMD-811 C Your Local Agent/Dealer 9-52, Ashihara-cho, Nishinomiya, Japan Telephone: 0798-65-2111 Telefax: 0798-65-4200 A ll rights reserved. Printed in Japan FIRST EDITION :

More information

INSTRUCTION MANUAL VHF TRANSCEIVER. if110s UHF TRANSCEIVER. if210s

INSTRUCTION MANUAL VHF TRANSCEIVER. if110s UHF TRANSCEIVER. if210s INSTRUCTION MANUAL VHF TRANSCEIVER if110s UHF TRANSCEIVER if210s IMPORTANT READ ALL INSTRUCTIONS carefully and completely before using the transceiver. SAVE THIS INSTRUCTION MANUAL This instruction manual

More information

Simulator. Demo mode. Simulator source files. 102 Simulator HDS Gen3 Operator Manual

Simulator. Demo mode. Simulator source files. 102 Simulator HDS Gen3 Operator Manual 13 Simulator The simulation feature lets you see how the unit works in a stationary position and without being connected to sensors or other devices. Demo mode In this mode the unit automatically runs

More information

CHIRP RADAR. HELIX Operations Manual EN_A

CHIRP RADAR. HELIX Operations Manual EN_A CHIRP RADAR HELIX Operations Manual 532547-1EN_A THANK YOU! Thank you for choosing Humminbird, the #1 name in marine electronics. Humminbird has built its reputation by designing and manufacturing top

More information

OPERATOR'S MANUAL MARINE RADAR MODEL 1715 MODEL.

OPERATOR'S MANUAL MARINE RADAR MODEL 1715 MODEL. OPERATOR'S MANUAL MARINE RADAR MODEL MODEL 1715 www.furuno.co.jp IMPORTANT NOTICES General The operator of this equipment must read and follow the descriptions in this manual. Wrong operation or maintenance

More information

MARINE RADAR MODEL 1715

MARINE RADAR MODEL 1715 MARINE RADAR MODEL 1715 TABLE OF CONTENTS SAFETY INSTRUCTIONS... ii FOREWORD... iv SYSTEM CONFIGURATION... v EQUIPMENT LISTS... vi 1. OPERATION... 1 1.1 Controls...1 1.2 Indications...2 1.3 Turning Power

More information

HSB Series LCD Display Owner s Handbook

HSB Series LCD Display Owner s Handbook HSB Series LCD Display Owner s Handbook Document number: 81163_1 Date: 1st September 1999 Preface i HSB Series LCD Display Owner s Handbook September 1999 SAFETY NOTICES This radar equipment must be installed

More information

AIS6 / MFR6 User Manual

AIS6 / MFR6 User Manual AIS6 / MFR6 User Manual Important Features at a glance Below you will find a brief summary of the main features of your Seatec AIS6 / MFR6. Your Seatec AIS6 / MFR6 will be your reliable partner for a safe

More information

MARINE RADAR MODEL FR-1710/1725/1760DS

MARINE RADAR MODEL FR-1710/1725/1760DS MARINE RADAR MODEL FR-1710/1725/1760DS C Your Local Agent/Dealer 9-52, Ashihara-cho, Nishinomiya, Japan Telephone: 0798-65-2111 Telefax: 0798-65-4200 A ll rights reserved. Printed in Japan FIRST EDITION

More information

R PROFLAME Instruction Book Collection

R PROFLAME Instruction Book Collection 9.956.028 R00 584 PROFLAME Instruction Book Collection 4-17 18-29 584 PROFLAME System 30-39 Appendix: DIP SWITCH NUMBER (0=ON 1=OFF) 40-41 4-17 Fig. 1 The SIT is a device that allows, in conjunction with

More information

TECHNICAL SPECIFICATION. VisionMaster FT Radar & Chart Radar Features CAT1 and ECAT2

TECHNICAL SPECIFICATION. VisionMaster FT Radar & Chart Radar Features CAT1 and ECAT2 TECHNICAL SPECIFICATION VisionMaster FT Radar & Chart Radar Features CAT1 and ECAT2 The following specifications relate to release 4.1.3 series of VisionMaster FT (IEC62388 version) RADAR SYSTEM PERFORMANCE

More information

RADAR PLOTTER SOUNDER

RADAR PLOTTER SOUNDER RADAR PLOTTER SOUNDER MODEL FRS-1000A/FRS-1000B/FRS-1000C C Your Local Agent/Dealer 9-52, Ashihara-cho, Nishinomiya, Japan Telephone: 0798-65-2111 Telefax: 0798-65-4200 All rig hts reserved. Printed in

More information

INSTRUCTION MANUAL VHF FM TRANSCEIVER TK-7102H UHF FM TRANSCEIVER TK-8102H KENWOOD CORPORATION B (M)

INSTRUCTION MANUAL VHF FM TRANSCEIVER TK-7102H UHF FM TRANSCEIVER TK-8102H KENWOOD CORPORATION B (M) INSTRUCTION MANUAL VHF FM TRANSCEIVER TK-7102H UHF FM TRANSCEIVER TK-8102H KENWOOD CORPORATION B62-1596-00 (M) 09 08 07 06 05 04 03 02 01 00 THANK YOU! We are grateful you chose KENWOOD for your personal

More information

Overboard Recovery Communications Apparatus (ORCA ) RX-102 Receiver User s Manual

Overboard Recovery Communications Apparatus (ORCA ) RX-102 Receiver User s Manual Overboard Recovery Communications Apparatus (ORCA ) RX-102 Receiver User s Manual This page intentionally left blank 3 For technical support, contact BriarTek at 703-548-7892 or through our website at

More information

OPERATOR'S MANUAL MARINE RADAR MODEL 1623 MODEL.

OPERATOR'S MANUAL MARINE RADAR MODEL 1623 MODEL. OPERATOR'S MANUAL MARINE RADAR MODEL MODEL 1623 www.furuno.com IMPORTANT NOTICES General This manual has been authored with simplified grammar, to meet the needs of international users. The operator of

More information

User Manual code: (D e)

User Manual code: (D e) MDS 1 Radome 0.9 Feet MDS 8 Radome 1.5 Feet MDS 9 Radome 1.8 Feet MDS 10 Open 4 or 5 Feet Copyright 2008 Seiwa - Hong Kong All rights reserved. Printed in Italy. No part of this publication may be reproduced

More information

RESOLUTION A.820(19) adopted on 23 November 1995 PERFORMANCE STANDARDS FOR NAVIGATIONAL RADAR EQUIPMENT FOR HIGH-SPEED CRAFT

RESOLUTION A.820(19) adopted on 23 November 1995 PERFORMANCE STANDARDS FOR NAVIGATIONAL RADAR EQUIPMENT FOR HIGH-SPEED CRAFT INTERNATIONAL MARITIME ORGANIZATION A 19/Res. 820 15 December 1995 Original: ENGLISH ASSEMBLY 19th session Agenda item 10 NOT TO BE REMOVED \ FROM THE IMO LIBRARY RESOLUTION A.820(19) adopted on 23 November

More information

Installation and Operation Manual

Installation and Operation Manual NAVMAN Tracker 5507/ 5607 Installation and Operation Manual Chartplot ters w w w. n a v m a n. c o m IMPORTANT SAFETY INFORMATION Please read carefully before installation and use. DANGER! WARNING! CAUTION

More information

OPERATING GUIDE OPERATING GUIDE FOR IC-F5060/F6060 SERIES BIIS 1200/MDC 1200 SYSTEM/ LTR /IDAS OPERATION

OPERATING GUIDE OPERATING GUIDE FOR IC-F5060/F6060 SERIES BIIS 1200/MDC 1200 SYSTEM/ LTR /IDAS OPERATION OPERATING GUIDE OPERATING GUIDE FOR IC-F060/F6060 SERIES BIIS 100/MDC 100 SYSTEM/ LTR /IDAS OPERATION IMPORTANT Thank you for purchasing this Icom transceiver. The BIIS 100/MDC 100 system/ltr /IDAS (Icom

More information

Multi-Channel In-Out Thermometer with Cable Free Sensor and RF Clock

Multi-Channel In-Out Thermometer with Cable Free Sensor and RF Clock Multi-Channel In-Out Thermometer with Cable Free Sensor and RF Clock MAIN FEATURES: MAIN UNIT GB MODEL: RMR182 USER'S MANUAL INTRODUCTION Congratulations on your purchase of the RMR182 Multi- Channel In-Out

More information

FOIL-200 OPERATORS MANUAL. Furuno Finland Oy

FOIL-200 OPERATORS MANUAL. Furuno Finland Oy FOIL-200 OPERATORS MANUAL Furuno Finland Oy www.furuno.fi TABLE OF CONTENTS FOREWORD...3 SYSTEM CONFIGURATION...4 1. GRAPHICAL USER INTERFACE (GUI)...5 1.1 Operating mode selections...6 1.2 Navigational

More information

GPSMAP 500/700 Series and echomap 50/70 Series Owner s Manual

GPSMAP 500/700 Series and echomap 50/70 Series Owner s Manual GPSMAP 500/700 Series and echomap 50/70 Series Owner s Manual February 2013 190-01556-00_0A Printed in Taiwan All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in

More information

OPERATING GUIDE OPERATING GUIDE FOR IC-F5060/F6060 SERIES BIIS 1200/MDC 1200 SYSTEM/ LTR /IDAS NXDN OPERATION

OPERATING GUIDE OPERATING GUIDE FOR IC-F5060/F6060 SERIES BIIS 1200/MDC 1200 SYSTEM/ LTR /IDAS NXDN OPERATION OPERATING GUIDE OPERATING GUIDE FOR IC-F060/F6060 SERIES BIIS 100/MDC 100 SYSTEM/ LTR /IDAS NXDN OPERATION IMPORTANT Thank you for purchasing this Icom transceiver. The BIIS 100/MDC 100 system/ltr /IDAS

More information

GC-1032 Metal Detector OWNER S MANUAL

GC-1032 Metal Detector OWNER S MANUAL GC-1032 Metal Detector OWNER S MANUAL 1 With your GC-1032 metal detector, you can hunt for coins, relics, jewelry, gold, and silver just about anywhere. The detector comes with high sensitivity and strong

More information

CONTENTS. INTRODUCTION 1 INTRODUCTION TO GPSPlus 3

CONTENTS. INTRODUCTION 1 INTRODUCTION TO GPSPlus 3 CONTENTS INTRODUCTION 1 INTRODUCTION TO GPSPlus 3 OPERATION OF GPSPlus 5 INTRODUCTION 6 SWITCHING ON 6 INITIAL DISPLAYS 6 USING THE LIGHTS KEY 7 NOTES ABOUT ENTERING DATA 7 USING THE POS KEY 8 USING WAYPOINTS

More information

OPERATOR'S MANUAL FR-1505 MARK-3 FR-1510 MARK-3 FR-1525 MARK-3 MARINE RADAR MODEL.

OPERATOR'S MANUAL FR-1505 MARK-3 FR-1510 MARK-3 FR-1525 MARK-3 MARINE RADAR MODEL. OPERATOR'S MANUAL MODEL MARINE RADAR FR-1505 MARK-3 FR-1510 MARK-3 FR-1525 MARK-3 www.furuno.co.jp *00080840411* *00080840411* SAFETY INSTRUCTIONS DANGER Before turning on the radar/arpa, make sure that

More information

Declaration of Conformity (As required by Article 6.3 of Directive 1999/5/EC-RTTE Directive)

Declaration of Conformity (As required by Article 6.3 of Directive 1999/5/EC-RTTE Directive) Declaration of Conformity (As required by Article 6.3 of Directive 1999/5/EC-RTTE Directive) Declares under his sole responsibility that the produced Marine Radar System manufactured by Koden Electronics

More information

HM-162E. z HM-162E supplied accessories. x Function display INSTRUCTIONS REMOTE-CONTROL MICROPHONE. Thank you for purchasing the HM-162E REMOTE- q w e

HM-162E. z HM-162E supplied accessories. x Function display INSTRUCTIONS REMOTE-CONTROL MICROPHONE. Thank you for purchasing the HM-162E REMOTE- q w e INSTRUCTIONS REMOTE-CONTROL MICROPHONE HM-162E Thank you for purchasing the HM-162E REMOTE- CONTROL MICROPHONE. The COMMANDMIC III TM is a remote control microphone for use with the IC-M603 or else. Please

More information

AQUAMAP 80/100 Series Owner s Manual

AQUAMAP 80/100 Series Owner s Manual AQUAMAP 80/100 Series Owner s Manual April 2014 190-01657-00_0B Printed in Taiwan All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written

More information

PRECAUTIONS BEFORE OPERATION

PRECAUTIONS BEFORE OPERATION JMA-3300Series MARINE RADAR EQUIPMENT INSTRUCTION MANUAL PRECAUTIONS BEFORE OPERATION PRECAUTIONS BEFORE OPERATION Cautions for high voltage High voltages from hundreds volts to tens of thousands volts

More information

SAFETY INSTRUCTIONS DANGER WARNING CAUTION

SAFETY INSTRUCTIONS DANGER WARNING CAUTION Dual GPS DD-80 Your Local Agent/Dealer 9-52 Ashihara-cho, Nishinomiya, Japan Telephone : 0798-65-2111 Telefax : 0798-65-4200 All rights reserved. PUB.No. OME-43741 Printed in Japan FIRST EDITION : DEC.

More information

Explorer 725 / 705. VHF Marine Radio Quickstart Guide.

Explorer 725 / 705. VHF Marine Radio Quickstart Guide. Explorer 725 / 705 VHF Marine Radio Quickstart Guide www.northstarnav.com This Quickstart Guide is to be used with the Northstar Explorer 721 VHF Radio Installation and Operation Manual. The Explorer 721

More information

echomap CHIRP 40/50/70/90 Series Owner s Manual

echomap CHIRP 40/50/70/90 Series Owner s Manual echomap CHIRP 40/50/70/90 Series Owner s Manual January 2016 190-01951-00_0B All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent

More information

UR200SI / UR200WE ENGLISH

UR200SI / UR200WE ENGLISH ENGLISH Hersteller Wörlein GmbH Tel.: +49 9103/71670 Gewerbestrasse 12 Fax.: +49 9103/716712 D 90556 Cadolzburg Email. info@woerlein.com GERMANY Web: www.woerlein.com UR200SI / UR200WE ENVIRONMENTAL PROTECTION

More information

Important safety instructions

Important safety instructions RCR-29 GB Version 1 Important safety instructions VERY IMPORTANT PLEASE READ Sangean suggest that you keep your AC Adapter at least 12 inches away from the radio while listening to the AM Band. Your Sangean

More information

Declaration of Conformity (As referred to in Annex IV 2. of Directive 2004/108/EC)

Declaration of Conformity (As referred to in Annex IV 2. of Directive 2004/108/EC) Declaration of Conformity (As referred to in Annex IV 2. of Directive 2004/108/EC) Declares under his sole responsibility that the produced Sonar manufactured by Koden Electronics Co., Ltd. 5278 Uenohara

More information

10.4 Multi-Color LCD RADAR 1835/1935/1945. Model. Auto Tuning (Sensitivity)

10.4 Multi-Color LCD RADAR 1835/1935/1945. Model.  Auto Tuning (Sensitivity) 10.4 Multi-Color LCD RADAR 1835/1935/1945 Auto Tuning (Sensitivity) www.furuno.com Bringing a New Level of Quality, Operability, and Reliability into Marine Radar. Furuno's new Radar series, 1835/1935/1945,

More information

SL72 and SL72RC PLUS Pathfinder Radar and Radar/Chartplotter Owner s Handbook. Document number: 81204_1 Date:18th January 2002

SL72 and SL72RC PLUS Pathfinder Radar and Radar/Chartplotter Owner s Handbook. Document number: 81204_1 Date:18th January 2002 Distributed by Any reference to Raytheon or RTN in this manual should be interpreted as Raymarine. The names Raytheon and RTN are owned by the Raytheon Company. SL72 and SL72RC PLUS Pathfinder Radar and

More information

GPSMAP 700 series owner s manual

GPSMAP 700 series owner s manual GPSMAP 700 series owner s manual Introduction Introduction WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. This manual

More information

GPS odometer User manual

GPS odometer User manual explona GPS odometer User manual explona series are devices designed to provide accurate distance measurement and navigation. It can have both ground and marine use. It is a modern odometer with an integrated

More information

1 Radar calibration at first installation

1 Radar calibration at first installation 1 Radar calibration at first installation At first installation is necessary to properly calibrate the radar. This includes: Heading Line Transmission Trigger Delay Antenna Parking Position (only MDS 9

More information

Speed ov r ground. , _.. t 1. ' t..,,.. I l.. f... f L LI I Track. «::!L 0 lp lp & [fl GPS REPEATER

Speed ov r ground. , _.. t 1. ' t..,,.. I l.. f... f L LI I Track. «::!L 0 lp lp & [fl GPS REPEATER Speed ov r ground, _.. t 1 ' t..,,.... I l.. f... f L LI I Track «::!L 0 lp lp & [fl GPS REPEATER CONTENTS INTRODUCTION 1 INSTALl:.JNG THE DISPL AY 1 INSTALLATION DIAGRAMS 2 3 GETTING OPER ATIONAL 4 USING

More information

GMR FANTOM 50/120 SERIES INSTALLATION INSTRUCTIONS

GMR FANTOM 50/120 SERIES INSTALLATION INSTRUCTIONS GMR FANTOM 50/120 SERIES INSTALLATION INSTRUCTIONS Important Safety Information WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important

More information

Explorer 657. Fishfinder and Chartplotter Installation and Operation Manual.

Explorer 657. Fishfinder and Chartplotter Installation and Operation Manual. Explorer 657 Fishfinder and Chartplotter Installation and Operation Manual www.northstarnav.com IMPORTANT SAFETY INFORMATION Please read carefully before installation and use. DANGER! WARNING! CAUTION

More information

Explorer 660 Chartplotter and Fishfinder Installation and Operation Manual

Explorer 660 Chartplotter and Fishfinder Installation and Operation Manual Explorer 660 Chartplotter and Fishfinder Installation and Operation Manual www.northstarnav.com IMPORTANT SAFETY INFORMATION Please read carefully before installation and use. DANGER! WARNING! CAUTION

More information

MARINE RADAR MODEL FR-8051/8111/8251

MARINE RADAR MODEL FR-8051/8111/8251 MARINE RADAR MODEL FR-8051/8111/8251 C Your Local Agent/Dealer 9-52, Ashihara-cho, Nishinomiya, Japan Telephone: 0798-65-2111 Telefax: 0798-65-4200 A ll rights reserved. Printed in Japan FIRST EDITION

More information

OPERATING GUIDE VHF TRANSCEIVER. Iç-G88

OPERATING GUIDE VHF TRANSCEIVER. Iç-G88 OPERATING GUIDE VHF TRANSCEIVER Iç-G88 INTRODUCTION PREFACE We appreciate you choosing Icom for your communication needs. The MDC 1200 signaling system is built into your IC-G88 vhf transceiver. IMPORTANT

More information

LD2342 USWM V1.6. LD2342 V1.4 Page 1 of 18

LD2342 USWM V1.6. LD2342 V1.4 Page 1 of 18 LD2342 USWM V1.6 LD2342 V1.4 Page 1 of 18 GENERAL WARNINGS All Class A and Class B marine Automatic Identification System (AIS) units utilize a satellite based system such as the Global Positioning Satellite

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60936-2 First edition 1998-10 Maritime navigation and radiocommunication equipment and systems Radar Part 2: Shipborne radar for high-speed craft (HSC) Methods of testing and

More information

Broadband 4G Radar. Reinventing Radar

Broadband 4G Radar. Reinventing Radar 2012 Broadband 4G Radar Reinventing Radar Reinventing Radar Simrad Yachting has pioneered a new standard of Dome Radars the first with the award-winning BR24, and more recently, with the Broadband 3G Radar.

More information

VHF 100/200 Series Radio Installation Instructions

VHF 100/200 Series Radio Installation Instructions These installation instructions are for the following VHF radios and handsets: North American Models VHF 100 VHF 200 GHS 10 International Models VHF 100i VHF 200i GHS 10i Compare the contents of this package

More information

OPERATING GUIDE OPERATING GUIDE FOR IC-F3160/F4160 SERIES BIIS 1200/MDC 1200 SYSTEM/ LTR /IDAS OPERATION

OPERATING GUIDE OPERATING GUIDE FOR IC-F3160/F4160 SERIES BIIS 1200/MDC 1200 SYSTEM/ LTR /IDAS OPERATION OPERATING GUIDE OPERATING GUIDE FOR IC-F160/F4160 SERIES BIIS 100/MDC 100 SYSTEM/ LTR /IDAS OPERATION IMPORTANT Thank you for purchasing this Icom transceiver. The BIIS 100/MDC 100 system/ltr /IDAS (Icom

More information

DIGITAL MULTIMETER CONTENTS DIGITAL MULTIMETER CONTENTS

DIGITAL MULTIMETER CONTENTS DIGITAL MULTIMETER CONTENTS CONTENTS CONTENTS CONTENTS 1. SAFETY INFORMATION...1 1.1 Preliminary...1 1.2 Dos and don ts...2 1.3 Symbols...3 1.4 Precautions...4 2. DESCRIPTION...5 2.1 Names of parts...6 2.2 Switches, buttons and input

More information

ARGUS RADAR SYSTEM Oil Spill Detection Addendum. English

ARGUS RADAR SYSTEM Oil Spill Detection Addendum. English ARGUS RADAR SYSTEM Oil Spill Detection Addendum English Record of changes Rev. Date Change requested by A March 1, 2012 N.A. First issue Purpose of change 988-10189-001 2 Rev. A Table of contents Chapter

More information

GMR 21/41 marine radar. Owner s Manual

GMR 21/41 marine radar. Owner s Manual GMR 21/41 marine radar Owner s Manual Copyright 2006 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151 st Street, Olathe, Kansas 66062, U.S.A. Tel. 913/397.8200 or 800/800.1020 Fax

More information

AIS Training. AIS Technology in Digital Yacht Products Explained. Digital Yacht Ltd TEL

AIS Training. AIS Technology in Digital Yacht Products Explained. Digital Yacht Ltd  TEL AIS Training AIS Technology in Digital Yacht Products Explained Digital Yacht Ltd www.digitalyacht.co.uk TEL + 44 1179 554474 What is AIS? The Automatic Identification System (AIS) is the biggest advance

More information

SRT Marine Technology. LD2342 V1.4 Page 1 of 22

SRT Marine Technology. LD2342 V1.4 Page 1 of 22 LD2342 V1.4 Page 1 of 22 LD2342 V1.4 Page 2 of 22 2 LD2342 V1.4 Page 3 of 22 GENERAL WARNINGS All marine Automatic Identification System (AIS) units utilise a satellite based system such as the Global

More information

Surveillanca & Security DIGITAL DUAL BAND ARPA RADAR SYSTEM

Surveillanca & Security DIGITAL DUAL BAND ARPA RADAR SYSTEM Surveillanca & Security DIGITAL DUAL BAND ARPA RADAR SYSTEM X-band K a -band GEMINI-DB digital dual-band ARPA radar offers operational advantages and flexibility of operations thanks to the simultaneous

More information

NC Models. CP390i - GPS Chart Plotters. Addendum to Owner s Manual Issue C to update to Software Version (*)

NC Models. CP390i - GPS Chart Plotters. Addendum to Owner s Manual Issue C to update to Software Version (*) CP390i - GPS Chart Plotters (*) NC Models to Owner s Manual Issue 16.50 C 300311 to update to Software Version 16.70 BUILT-IN CHARTS ARE NOT INSTALLED The following paragraphs/pictures are not applicable:

More information

OPERATOR'S MANUAL. Marine Radar MODEL 1824C/1834C/ 1934C/1944C/1954C. Color Video Plotter GD-1920C.

OPERATOR'S MANUAL. Marine Radar MODEL 1824C/1834C/ 1934C/1944C/1954C. Color Video Plotter GD-1920C. MODEL 1824C/1834C/1934C/1944C/1954C, GD-1920C OPERATOR'S MANUAL Marine Radar MODEL 1824C/1834C/ 1934C/1944C/1954C Color Video Plotter GD-1920C OPERATOR'S MANUAL (Elemental Chlorine Free) The paper used

More information

A WORLD OF LISTENING WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

A WORLD OF LISTENING WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DDR-3 FM RDS/DAB digital radio A WORLD OF LISTENING THE LIGHTNING FLASH AND ARROW- HEAD WITHIN THE TRIANGLE IS A WARNING SIGN ALERTING YOU OF DANGEROUS VOLTAGE INSIDE THE RADIO. WARNING: TO PREVENT FIRE

More information

GPS (GLOBAL POSITIONING SYSTEM)

GPS (GLOBAL POSITIONING SYSTEM) GPS (GLOBAL POSITIONING SYSTEM) What is GPS? GPS, standing for Global Positioning System, is becoming common nowadays. Following is a brief introduction. The American Defense Department developed GPS originally

More information

CITIZEN QUARTZ WINGMAN V. Model No. JQ2XXX/ Cal. No. C420 INSTRUCTION MANUAL CTZ-E6793

CITIZEN QUARTZ WINGMAN V. Model No. JQ2XXX/ Cal. No. C420 INSTRUCTION MANUAL CTZ-E6793 CITIZEN QUARTZ WINGMAN V Model No. JQ2XXX/ Cal. No. C420 INSTRUCTION MANUAL CTZ-E6793 3. SETTING THE ANALOG TIME DISPLAY 1. Pull out the crown and stop the seconds hand. 2. Turn the crown and set the hands

More information

Pub LVR-250. VHF Radio. Installation and Operation Instructions

Pub LVR-250. VHF Radio. Installation and Operation Instructions Pub. 988-0158-051 www.lowrance.com LVR-250 VHF Radio Installation and Operation Instructions Copyright 2007 Navico All rights reserved. Lowrance is a registered trademark of Navico No part of this manual

More information

GMR 420/620/1220 xhd2 Series Installation Instructions

GMR 420/620/1220 xhd2 Series Installation Instructions GMR 420/620/1220 xhd2 Series Installation Instructions To obtain the best performance and to avoid damage to your boat, install the device according to these instructions. Read all installation instructions

More information

Introduction...2 Content...2 Multi-Function Display Software Update...2 AIS Overview...2

Introduction...2 Content...2 Multi-Function Display Software Update...2 AIS Overview...2 SKIPPERS NOTES Yacht Sea Essay of Hamble Newsletter No 02/16 Introduction This is an occasional document issued by the Yacht Secretary, which will be placed on the CSD website and/or sent to all CSSA approved

More information

HM-162B/SW. z HM-162B/SW supplied accessories. x Function display INSTRUCTIONS REMOTE-CONTROL MICROPHONE

HM-162B/SW. z HM-162B/SW supplied accessories. x Function display INSTRUCTIONS REMOTE-CONTROL MICROPHONE INSTRUCTIONS REMOTE-CONTROL MICROPHONE HM-162B/SW Thank you for purchasing the HM-162B/SW REMOTE- CONTROL MICROPHONE. The COMMANDMIC III TM is a remote control microphone for use with the IC-M604 or else.

More information

Operation Guide 3452

Operation Guide 3452 MA1804-EA Contents Before Getting Started... Button Operations Mode Overview Charging the Watch Solar Charging Charging with the Charger Charging Time Guidelines Checking the Charge Level Power Saving

More information

OPERATING GUIDE OPERATING GUIDE FOR IC-F3160/F4160 SERIES BIIS 1200/MDC 1200 SYSTEM/ LTR /IDAS NXDN OPERATION

OPERATING GUIDE OPERATING GUIDE FOR IC-F3160/F4160 SERIES BIIS 1200/MDC 1200 SYSTEM/ LTR /IDAS NXDN OPERATION OPERATING GUIDE OPERATING GUIDE FOR IC-F160/F4160 SERIES BIIS 100/MDC 100 SYSTEM/ LTR /IDAS NXDN OPERATION IMPORTANT Thank you for purchasing this Icom transceiver. The BIIS 100/MDC 100 system/ltr /IDAS

More information

ICS NAV6 range. User Guide

ICS NAV6 range. User Guide ICS NAV6 range User Guide Important Information This equipment is not approved for use by SOLAS convention vessels within the Global Maritime Distress and Safety System (GMDSS) It is intended for use by

More information

INTEGRATED HEADING SENSOR PG-1000

INTEGRATED HEADING SENSOR PG-1000 INTEGRATED HEADING SENSOR PG-1000 Your Local Agent/Dealer 9-52 Ashihara-cho, Nishinomiya, Japan Telephone : 0798-65-2111 fax : 0798-65-4200 ( HIMA All rights reserved. PUB.No. OME-72460 ) PG-1000 Printed

More information

GPS NAVIGATOR GP-150

GPS NAVIGATOR GP-150 GPS NAVIGATOR GP-150 The paper used in this manual is elemental chlorine free. FURUNO Authorized Distributor/Dealer 9-52 Ashihara-cho, Nishinomiya 662-8580, JAPAN Telephone : 0798-65-2111 Fax : 0798-65-4200

More information

Request to Customers All repairs performed on this watch, excluding repairs involving the band, are to be performed at the CITIZEN.

Request to Customers All repairs performed on this watch, excluding repairs involving the band, are to be performed at the CITIZEN. INSTRUCTION MANUAL Request to Customers All repairs performed on this watch, excluding repairs involving the band, are to be performed at the CITIZEN. When desiring to have your watch repaired or inspected,

More information

RMV25 / RMV50 RMU25 / RMU45

RMV25 / RMV50 RMU25 / RMU45 RMV25 / RMV50 RMU25 / RMU45 Owner's Manual TABLE OF CONTENTS INTRODUCTION... 3 FCC Requirements... 3 SAFETY WARNING INFORMATION... 3 CONTROLS and INDICATORS... 5 FRONT PANEL... 5 LCD Icons and Indicators...

More information

GMR 20/40 Marine Radar Owner s Manual

GMR 20/40 Marine Radar Owner s Manual GMR 20/40 Marine Radar Owner s Manual Copyright 2005 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151 st Street, Olathe, Kansas 66062, U.S.A. Tel. 913/397.8200 or 800/800.1020 Fax

More information

INSTRUCTION MANUAL UHF SRBR. if4sr

INSTRUCTION MANUAL UHF SRBR. if4sr INSTRUCTION MANUAL UHF SRBR if4sr FOREWORD CAUTIONS i READ ALL INSTRUCTIONS carefully and completely before using the transceiver. SAVE THIS INSTRUCTION MANUAL This instruction manual contains important

More information

2017 Garmin Ltd. or its subsidiaries All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the

2017 Garmin Ltd. or its subsidiaries All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the Owner's Manual 2017 Garmin Ltd. or its subsidiaries All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves

More information

GMR 420/620/1220/2520 XHD2 SERIES INSTALLATION INSTRUCTIONS

GMR 420/620/1220/2520 XHD2 SERIES INSTALLATION INSTRUCTIONS GMR 420/620/1220/2520 XHD2 SERIES INSTALLATION INSTRUCTIONS Important Safety Information WARNING See the Important Safety and Product Information guide in the product box for product warnings and other

More information

GPS + COMPASS SENSOR INSTALLATION GUIDE

GPS + COMPASS SENSOR INSTALLATION GUIDE GPS + COMPASS SENSOR INSTALLATION GUIDE 532162-1_B THANK YOU! Thank you for choosing Humminbird, the #1 name in fishfinders. Humminbird has built its reputation by designing and manufacturing top-quality,

More information

OPERATING GUIDE VHF DIGITAL TRANSCEIVERS. if1000d. series UHF DIGITAL TRANSCEIVERS. if2000d series. The photo shows the VHF transceiver.

OPERATING GUIDE VHF DIGITAL TRANSCEIVERS. if1000d. series UHF DIGITAL TRANSCEIVERS. if2000d series. The photo shows the VHF transceiver. OPERATING GUIDE VHF DIGITAL TRANSCEIVERS if1000d UHF DIGITAL TRANSCEIVERS series if2000d series The photo shows the VHF transceiver. TABLE OF CONTENTS 1. PANEL DESCRIPTION Front, top and side panels 1-2

More information

GPSMAP. 4000/5000 series owner s manual

GPSMAP. 4000/5000 series owner s manual GPSMAP 4000/5000 series owner s manual 2009 Garmin Ltd. or its subsidiaries All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated,

More information

INSTRUCTION MANUAL VHF FM TRANSCEIVER TK-6110 B (K,K2)

INSTRUCTION MANUAL VHF FM TRANSCEIVER TK-6110 B (K,K2) INSTRUCTION MANUAL VHF FM TRANSCEIVER TK-6110 B62-1216-20 (K,K2) 09 08 07 06 05 04 03 02 THANK YOU! We are grateful you chose KENWOOD for your land mobile applications. We believe this easy-to-use transceiver

More information

INSTRUCTION MANUAL VHF MOBILE TRANSCEIVERS. if5120d. Series UHF MOBILE TRANSCEIVERS. if6120d. Series

INSTRUCTION MANUAL VHF MOBILE TRANSCEIVERS. if5120d. Series UHF MOBILE TRANSCEIVERS. if6120d. Series INSTRUCTION MANUAL VHF MOBILE TRANSCEIVERS if50d Series UHF MOBILE TRANSCEIVERS if60d Series i IMPORTANT READ ALL INSTRUCTIONS carefully and completely before using the transceiver. SAVE THIS INSTRUCTION

More information

E-Series Display Operating Guide

E-Series Display Operating Guide E-Series Display Operating Guide www.raymarine.com PAGE ACTIVE WPTS MOB DATA MENU General Operation OK OUT RANGE IN CANCEL The control panel Using the controls Setting up the display Using CompactFlash

More information

INSTRUCTION MANUAL HF AUTOMATIC ANTENNA TUNER AT-141

INSTRUCTION MANUAL HF AUTOMATIC ANTENNA TUNER AT-141 INSTRUCTION MANUAL HF AUTOMATIC ANTENNA TUNER AT-141 FOREWORD Thank you for purchasing the AT-141 HF AUTO- MATIC ANTENNA TUNER. The AT-141 is designed, primarily for use with Icom HF transceivers. Refer

More information

NEW FOR Radar. Broadband. The evolution of the radar revolution.

NEW FOR Radar. Broadband. The evolution of the radar revolution. NEW FOR 2011 Broadband Radar The evolution of the radar revolution. The evolution of the radar revolution. The original BR24 Broadband Radar, the frequency modulated continuous wave (FMCW) radar, has captured

More information

Declaration of Conformity (As required by Article 7 (1) of Directive 89/336/EEC)

Declaration of Conformity (As required by Article 7 (1) of Directive 89/336/EEC) Declaration of Conformity (As required by Article 7 (1) of Directive 89/336/EEC) Declares under his sole responsibility that the produced Color Sonar manufactured by Koden Electronics Co., Ltd. 5278 Uenohara

More information

Guideline No.N-01 (201510) N-01 Marine Radar. Issued date: 20 th October, China Classification Society

Guideline No.N-01 (201510) N-01 Marine Radar. Issued date: 20 th October, China Classification Society Guideline No.N-01 (201510) N-01 Marine Radar Issued date: 20 th October, 2015 China Classification Society Foreword This Guideline is a part of CCS Rules, which contains technical requirements, inspection

More information

Please read carefuly before using. Aerobic Lateral Trainer ASSEMBLY MANUAL H901

Please read carefuly before using. Aerobic Lateral Trainer ASSEMBLY MANUAL H901 Please read carefuly before using. Aerobic Lateral Trainer ASSEMBLY MANUAL H901 TABLE OF CONTENTS 1 IMPORTANT SAFETY INFORMATION 2 Important Safety Precautions 2 Weight Limit Capacities 2 Warning 2 2

More information

INSTRUCTION MANUAL VHF TRANSCEIVER. if111 if121 UHF TRANSCEIVER. if211 if221

INSTRUCTION MANUAL VHF TRANSCEIVER. if111 if121 UHF TRANSCEIVER. if211 if221 INSTRUCTION MANUAL VHF TRANSCEIVER if111 if121 UHF TRANSCEIVER if211 if221 IMPORTANT READ ALL INSTRUCTIONS carefully and completely before using the transceiver. SAVE THIS INSTRUCTION MANUAL This instruction

More information