Related Information Refer to the NI Switches Help for detailed topology information.

Size: px
Start display at page:

Download "Related Information Refer to the NI Switches Help for detailed topology information."

Transcription

1 DEVICE SPECIFICATIONS NI PXI/PXIe-2532B 512-Crosspoint Matrix This document lists specifications for the NI PXI/PXIe-2532B (NI 2532B) 512-crosspoint matrix. All specifications are subject to change without notice. Visit ni.com/manuals for the most current specifications. Topology... 1-wire 4 x 128 matrix, 1-wire 8 x 64 matrix, 1-wire 16 x 32 matrix, 1-wire dual 4 x 64 matrix, 1-wire dual 8 x 32 matrix, 1-wire dual 16 x 16 matrix, 1-wire quad 4 x 32 matrix, 1-wire sixteen 2 x 16 matrix, 2-wire 4 x 64 matrix, 2-wire 8 x 32 matrix, 2-wire 16 x 16 matrix, 2-wire dual 4 x 32 matrix Related Information Refer to the NI Switches Help for detailed topology information. Contents About These Specifications...2 Input Characteristics...2 Dynamic Characteristics...4 Trigger Characteristics...5 Physical Characteristics...5 Environment...6 Shock and Vibration...6 Diagrams...6 Accessories...9 Reed Relay Life...10 Solution...11 Compliance and Certifications...12 Safety...12 Electromagnetic Compatibility...12 CE Compliance...12

2 Online Product Certification...13 Environmental Management...13 About These Specifications Specifications characterize the warranted performance of the instrument under the stated operating conditions. Typical Specifications are specifications met by the majority of the instrument under the stated operating conditions and are tested at 23 C ambient temperature. Typical specifications are not warranted. All voltages are specified in DC, AC pk, or a combination unless otherwise specified. Clean devices and terminal blocks by brushing off light dust with a soft, nonmetallic brush. Remove other contaminants with a soft, lint-free, dampened cloth. Do not use detergent or chemical solvents. The unit must be completely dry and free from contaminants before returning to service. Caution Refer to the Read Me First: Safety and Electromagnetic Compatibility document for important safety and electromagnetic compatibility information. To obtain a copy of this document online, visit ni.com/manuals, and search for the document title. Caution The protection provided by the NI 2532B can be impaired if it is used in a manner not described in this document. Input Characteristics Maximum switching voltage Channel-to-channel 100 V Channel-to-ground 100 V, CAT I Caution This module is rated for Measurement Category I and intended to carry signal voltages no greater than 100 V. This module can withstand up to 500 V impulse voltage. Do not use this module for connection to signals or for 2 NI PXI/PXIe-2532B Specifications ni.com

3 measurements within Categories II, III, or IV. Do not connect to MAINs supply circuits (for example, wall outlets) of 115 or 230 VAC. Caution When hazardous voltages (>42.4 V pk / 60 VDC) are present on any relay terminal, safety low-voltage (<42.4 V pk /60 VDC) cannot be connected to any other relay terminal.... Maximum current 0.5 A (switching or carry, per channel) Caution The maximum switching power is limited by the maximum switching current and the maximum voltage, and must not exceed 10 W.... Maximum switching power 10 W (per channel) DC path resistance Initial <1 Ω End-of-life 2 Ω Open channel > Ω Note DC path resistance typically remains low for the life of the relay. At the end of relay life, the path resistance rapidly rises above 2 Ω. Load ratings apply to relays used within the specification before the end of relay life. Thermal EMF 1-wire <50 μv 2-wire <20 μv Bandwidth, typical (-3 db, 50 Ω termination) 1-wire row/column 30 MHz 2-wire row/column 25 MHz Crosstalk, typical (50 Ω termination) Channelto-channel 10 khz <-85 db 100 khz <-65 db 1 MHz <-45 db Isolation, typical (50 Ω termination) Open channel 10 khz >84 db 100 khz >64 db 1 MHz >44 db Related Information Electromagnetic Compatibility on page 12 NI PXI/PXIe-2532B Specifications National Instruments 3

4 Dynamic Characteristics Simultaneous drive limit PXI 40 relays PXI Express 64 relays... Relay operate time 0.25 ms Note Certain applications may require additional time for proper settling.... Release time 0.25 ms Typical relay life (no load) Mechanical cycles Electrical (resistive, <10 pf load) V, 100 ma cycles V, 500 ma cycles V, 10 ma cycles Note Optional series protection resistance, available for the terminal blocks, increases the expected relay life at higher voltages. This series protection resistance shields the reed relays from the effects of cable and load capacitance. For more information, refer to the Reed Relay Protection tutorial at ni.com/zone. Note Reed relays are highly susceptible to damage caused by switching capacitive and inductive loads. Capacitive loads can cause high inrush currents while inductive loads can cause high flyback voltages. The addition of appropriate resistive protection can greatly improve contact lifetime. For more information about adding protection circuitry to a capacitive load, visit ni.com/info and enter the Info Code relaylifetime. For information about inductive loads, enter the Info Code relayflyback. Note The relays used in the NI 2532B are field replaceable. Related Information Refer to the NI Switches Help for information about including additional settling time, and replacing a failed relay. Reed Relay Life on page 10 4 NI PXI/PXIe-2532B Specifications ni.com

5 Trigger Characteristics Input trigger Sources PXI trigger lines 0 7 Minimum pulse width 150 ns Note The NI 2532B can recognize trigger pulse widths less than 150 ns if you disable digital filtering. Output trigger Destinations PXI trigger lines 0 7 Pulse width Programmable (1 µs to 62 µs) Related Information Refer to the NI Switches Help for information about disabling digital filtering. Physical Characteristics... Relay type Reed Note NI advises against installing reed relay modules directly adjacent to an embedded controller with a magnetic hard drive because of the sensitivity of reed relays and the possibility of interference.... Relay contact material Rhodium... I/O connectors 2, 150 pos, Samtec ERM8-EM series Note Terminal block connectivity is with standard inch pitch headers. Power requirement PXI... 5 V 10 W V 2 W NI PXI/PXIe-2532B Specifications National Instruments 5

6 PXI Express V 15 W V 2 W Dimensions... (L W H) 3U, one slot, PXI/cPCI module, PXI Express compatible cm ( in.)... Weight 454 g (1 lb) Related Information Accessories on page 9 Environment... Operating temperature 0 C to 55 C... Storage temperature -20 C to 70 C... Relative humidity 5% to 85%, noncondensing... Pollution Degree 2... Maximum altitude 2,000 m Indoor use only. Shock and Vibration Operational... Shock 30 g peak, half-sine, 11 ms pulse (Tested in accordance with IEC Test profile developed in accordance with MIL- PRF-28800F.) Random Vibration Operating 5 to 500 Hz, 0.3 g rms Nonoperating 5 to 500 Hz, 2.4 g rms (Tested in accordance with IEC Nonoperating test profile exceeds the requirements of MIL- PRF-28800F, Class 3.) Diagrams The following figure shows the hardware diagram of the NI 2532B. 6 NI PXI/PXIe-2532B Specifications ni.com

7 Figure 1. NI 2532B Hardware Diagram B0C0 B0C1 B0C2 B0C3 B0C15 B0R0 B0R1 B1C0 B1C1 B1C2 B1C3 B1C15 B1R0 B1R1 B15C0 B15C1 B15C2 B15C3 B15C15 B15R0 B15R1 B15C1 B15R0 Note All NI 2532B relays are open when the device is powered on. The following figure shows the NI 2532B connector pinout for the left and right connectors. NI PXI/PXIe-2532B Specifications National Instruments 7

8 Figure 2. NI 2532B Connector Pinout B0R0 B0C2 B0C6 B0C10 B0C14 B1C0 B1C4 B1C8 B1C12 B2R0 B2C2 B2C6 B2C10 B2C14 B3C0 B3C4 B3C8 B3C12 B4R0 B4C2 B4C6 B4C10 B4C14 B5C0 B5C4 B5C8 B5C12 B6R0 B6C2 B6C6 B6C10 B6C14 B7C0 B7C4 B7C8 B7C12 B0C0 B0C4 B0C8 B0C12 B1R0 B1C2 B1C6 B1C10 B1C14 B2C0 B2C4 B2C8 B2C12 B3R0 B3C2 B3C6 B3C10 B3C14 B4C0 B4C4 B4C8 B4C12 B5R0 B5C2 B5C6 B5C10 B5C14 B6C0 B6C4 B6C8 B6C12 B7R0 B7C2 B7C6 B7C10 B7C14 B0R1 B0C3 B0C7 B0C11 B0C15 B1C1 B1C5 B1C9 B1C13 B2R1 B2C3 B2C7 B2C11 B2C15 B3C1 B3C5 B3C9 B3C13 B4R1 B4C3 B4C7 B4C11 B4C15 B5C1 B5C5 B5C9 B5C13 B6R1 B6C3 B6C7 B6C11 B6C15 B7C1 B7C5 B7C9 B7C13 B0C1 B0C5 B0C9 B0C13 B1R1 B1C3 B1C7 B1C11 B1C15 B2C1 B2C5 B2C9 B2C13 B3R1 B3C3 B3C7 B3C11 B3C15 B4C1 B4C5 B4C9 B4C13 B5R1 B5C3 B5C7 B5C11 B5C15 B6C1 B6C5 B6C9 B6C13 B7R1 B7C3 B7C7 B7C11 B7C B8R0 B8C2 B8C6 B8C10 B8C14 B9C0 B9C4 B9C8 B9C12 B10R0 B10C2 B10C6 B10C10 B10C14 B11C0 B11C4 B11C8 B11C12 B12R0 B12C2 B12C6 B12C10 B12C14 B13C0 B13C4 B13C8 B13C12 B14R0 B14C2 B14C6 B14C10 B14C14 B15C0 B15C4 B15C8 B15C12 B8C0 B8C4 B8C8 B8C12 B9R0 B9C2 B9C6 B9C10 B9C14 B10C0 B10C4 B10C8 B10C12 B11R0 B11C2 B11C6 B11C10 B11C14 B12C0 B12C4 B12C8 B12C12 B13R0 B13C2 B13C6 B13C10 B13C14 B14C0 B14C4 B14C8 B14C12 B15R0 B15C2 B15C6 B15C10 B15C14 B8R1 B8C3 B8C7 B8C11 B8C15 B9C1 B9C5 B9C9 B9C13 B10R1 B10C3 B10C7 B10C11 B10C15 B11C1 B11C5 B11C9 B11C13 B12R1 B12C3 B12C7 B12C11 B12C15 B13C1 B13C5 B13C9 B13C13 B14R1 B14C3 B14C7 B14C11 B14C15 B15C1 B15C5 B15C9 B15C13 B8C1 B8C5 B8C9 B8C13 B9R1 B9C3 B9C7 B9C11 B9C15 B10C1 B10C5 B10C9 B10C13 B11R1 B11C3 B11C7 B11C11 B11C15 B12C1 B12C5 B12C9 B12C13 B13R1 B13C3 B13C7 B13C11 B13C15 B14C1 B14C5 B14C9 B14C13 B15R1 B15C3 B15C7 B15C11 B15C Left Connector Right Connector High Voltage Related Information For topology-specific connection information, refer to your device in the NI Switches Help and the installation instructions for any associated accessories or terminal blocks. 8 NI PXI/PXIe-2532B Specifications ni.com

9 Accessories Visit ni.com for more information about the following accessories. Note The specifications listed in this document, including the safety and compliance certifications, also apply to the terminal blocks for the NI 2532B unless otherwise noted in the terminal block installation instructions. Table 1. NI Accessories for the NI 2532B Accessory Part Number NI TB-2640B terminal block (1-wire matrix) NI TB-2640B terminal block, with protection resistance NI TB-2641B terminal block (1-wire 8 64 matrix) NI TB-2641B terminal block, with protection resistance NI TB-2642B terminal block (1-wire matrix) NI TB-2642B terminal block, with protection resistance NI TB-2643B terminal block (2-wire 4 64 matrix or 1-wire dual 4 64 matrix) NI TB-2643B terminal block, with protection resistance NI TB-2644B terminal block (2-wire 8 32 matrix or 1-wire dual 8 32 matrix) NI TB-2644B terminal block, with protection resistance NI TB-2645B terminal block (2-wire matrix or 1-wire dual matrix) NI TB-2645B terminal block, with protection resistance NI TB-2646B terminal block (1-wire quad 4 32 matrix or 2-wire dual 4 32 matrix) NI TB-2646B terminal block, with protection resistance Note Refer to the terminal block installation instructions for signal connectivity options. Contact NI for custom terminal block designs. Caution You must install mating connectors according to local safety codes and standards and according to the specifications provided by the connector manufacturer. You are responsible for verifying safety compliance of third-party NI PXI/PXIe-2532B Specifications National Instruments 9

10 connectors and their usage according to the relevant standard(s), including UL and CSA in North America and IEC and VDE in Europe. Table 2. Third-Party Accessory for the NI 2532B Accessory Manufacturer Manufacturer Part Number Module mating connector 1 Samtec ERF L-D-EM2-TR Note Third-party vendors offer mass-interconnect solutions for this module. Refer to Virginia Panel at or MAC Panel at for connectivity offerings. Related Information Refer to the NI Switches Help for matrix expansion options. Reed Relay Life The following figure shows the reed relay lifetime nomograph. The purpose of this graph is to estimate reed relay lifetime. Note This nomograph is not meant to be an exact or guaranteed specification and should only be used as a guideline to estimate lifetime. Actual reed relay lifetimes may vary depending on application. Complete the following steps to use this nomograph: 1. Determine the peak voltage experienced across the relay while switching and mark this value on the Volts line. 2. Determine the sum of the DUT, cable, and instrumentation capacitances and mark this value on the Load Capacitance line. 3. Draw a straight line between both values. The intersection points of this line and the No Protection and 100 W Protection axes are the corresponding estimated relay lifetimes in cycles. For more information on adding protection resistance, visit ni.com/info and enter the Info Code relaylifetime. Refer to the following example and figure for an example application. The reed relay module is connected to a DMM via 1 meter of cable. The DMM and cable capacitances are 100 pf and 30 pf respectively. The maximum voltage switched across the relay is 50 V. Determine the estimated number of relay cycles with and without protection resistance. 1 PCB mount, additional cover or enclosure required. Refer to previous safety caution. 10 NI PXI/PXIe-2532B Specifications ni.com

11 Solution The total load capacitance is the sum of the cable and DMM capacitance, which is 130 pf. Draw a line between the 50 V point on the Volts axis and 130 pf on the Load Capacitance axis. The line drawn intersects the Cycles axes at approximately 500,000 on the No Protection axis and about 25,000,000 on the 100 Ω Protection axis (refer to Figure 3). This series resistance should be placed as close as possible to the relay for maximum effect. Figure 3. Reed Relay Lifetime Nomograph Cycles 1E 5 Load Capacitance (pf) E 4 1E Volts 1E 5 1E 6 1E 7 1E 7 1E E 8 5 1E 9 1E No Protection 100 Ω Protection NI PXI/PXIe-2532B Specifications National Instruments 11

12 Compliance and Certifications Safety This product is designed to meet the requirements of the following electrical equipment safety standards for measurement, control, and laboratory use: IEC , EN UL , CSA Note For UL and other safety certifications, refer to the product label or the Online Product Certification section. Electromagnetic Compatibility This product meets the requirements of the following EMC standards for electrical equipment for measurement, control, and laboratory use: EN (IEC ): Class A emissions; Basic immunity EN (CISPR 11): Group 1, Class A emissions EN (CISPR 22): Class A emissions EN (CISPR 24): Immunity AS/NZS CISPR 11: Group 1, Class A emissions AS/NZS CISPR 22: Class A emissions FCC 47 CFR Part 15B: Class A emissions ICES-001: Class A emissions Note In the United States (per FCC 47 CFR), Class A equipment is intended for use in commercial, light-industrial, and heavy-industrial locations. In Europe, Canada, Australia, and New Zealand (per CISPR 11), Class A equipment is intended for use only in heavy-industrial locations. Note Group 1 equipment (per CISPR 11) is any industrial, scientific, or medical equipment that does not intentionally generate radio frequency energy for the treatment of material or inspection/analysis purposes. Note For EMC declarations and certifications, refer to the Online Product Certification section. CE Compliance This product meets the essential requirements of applicable European Directives, as follows: 2006/95/EC; Low-Voltage Directive (safety) 2004/108/EC; Electromagnetic Compatibility Directive (EMC) 12 NI PXI/PXIe-2532B Specifications ni.com

13 Online Product Certification To obtain product certifications and the DoC for this product, visit ni.com/certification, search by model number or product line, and click the appropriate link in the Certification column. Environmental Management NI is committed to designing and manufacturing products in an environmentally responsible manner. NI recognizes that eliminating certain hazardous substances from our products is beneficial not only to the environment but also to NI customers. For additional environmental information, refer to the Minimize Our Environmental Impact web page at ni.com/environment. This page contains the environmental regulations and directives with which NI complies, as well as other environmental information not included in this document. Waste Electrical and Electronic Equipment (WEEE) EU Customers At the end of the product life cycle, all products must be sent to a WEEE recycling center. For more information about WEEE recycling centers, National Instruments WEEE initiatives, and compliance with WEEE Directive 2002/96/EC on Waste Electrical and Electronic Equipment, visit ni.com/environment/weee.htm. 电子信息产品污染控制管理办法 ( 中国 RoHS) 中国客户 National Instruments 符合中国电子信息产品中限制使用某些有害物质指令 (RoHS) 关于 National Instruments 中国 RoHS 合规性信息, 请登录 ni.com/environment/rohs_china (For information about China RoHS compliance, go to ni.com/environment/rohs_china.) NI PXI/PXIe-2532B Specifications National Instruments 13

14 Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents. You can find information about end-user license agreements (EULAs) and third-party legal notices in the readme file for your NI product. Refer to the Export Compliance Information at ni.com/legal/export-compliance for the National Instruments global trade compliance policy and how to obtain relevant HTS codes, ECCNs, and other import/export data National Instruments. All rights reserved B-01 Jun13

NI PXI/PXIe-2532 Specifications

NI PXI/PXIe-2532 Specifications NI PXI/PXIe-2532 Specifications 512-Crosspoint, 1-Wire Matrix This document lists specifications for the NI PXI/PXIe-2532 (NI 2532) 512-crosspoint matrix. All specifications are subject to change without

More information

Related Information Refer to the NI Switches Help for detailed topology information.

Related Information Refer to the NI Switches Help for detailed topology information. SPECIFICATIONS NI PXI-2530B 128-Channel Reed Relay Multiplexer/Matrix This document lists specifications for the NI PXI-2530B 128-channel multiplexer/matrix module (NI 2530B). All specifications are subject

More information

NI PXIe Contents. About These Specifications DEVICE SPECIFICATIONS. 3 GHz Ω Multiplexer (SP16T)

NI PXIe Contents. About These Specifications DEVICE SPECIFICATIONS. 3 GHz Ω Multiplexer (SP16T) DEVICE SPECIFICATIONS NI PXIe-2748 3 GHz 16 1 50 Ω Multiplexer (SP16T) This document lists specifications for the NI PXIe-2748 (NI 2748) multiplexer module. All specifications are subject to change without

More information

NI PXI Contents. About These Specifications DEVICE SPECIFICATIONS GHz Dual Transfer Switch 50 Ω Relay Module

NI PXI Contents. About These Specifications DEVICE SPECIFICATIONS GHz Dual Transfer Switch 50 Ω Relay Module DEVICE SPECIFICATIONS NI PXI-2598 26.5 GHz Dual Transfer Switch 50 Ω Relay Module This document lists specifications for the NI PXI-2598 (PXI-2598) relay module. All specifications are subject to change

More information

PXI Contents. PXI-2584 Specifications DEVICE SPECIFICATIONS. 300 V CAT II, 600 V CAT I Multiplexers

PXI Contents. PXI-2584 Specifications DEVICE SPECIFICATIONS. 300 V CAT II, 600 V CAT I Multiplexers DEVICE SPECIFICATIONS PXI-2584 300 V CAT II, 600 V CAT I Multiplexers This document lists specifications for the PXI-2584 high-voltage multiplexer switch module. All specifications are subject to change

More information

PXI Contents. PXI-2585 Specifications. Topology DEVICE SPECIFICATIONS. 10-Channel Multiplexer

PXI Contents. PXI-2585 Specifications. Topology DEVICE SPECIFICATIONS. 10-Channel Multiplexer DEVICE SPECIFICATIONS PXI-2585 10-Channel Multiplexer This document lists specifications for the PXI-2585 general-purpose relay module. All specifications are subject to change without notice. Visit ni.com/manuals

More information

Refer to the NI Switches Help at ni.com/manuals for detailed topology information.

Refer to the NI Switches Help at ni.com/manuals for detailed topology information. DEVICE SPECIFICATIONS NI PXI/PXIe-2593 500 MHz Dual 8 1 50 Ω Multiplexer This document lists specifications for the NI PXI/PXIe-2593 (NI 2593). All specifications are subject to change without notice.

More information

NI PXI-2530 Specifications

NI PXI-2530 Specifications NI PXI-2530 Specifications 128-Channel Reed Relay Multiplexer/Matrix This document lists specifications for the National Instruments PXI-2530 128-channel multiplexer/matrix module. All specifications are

More information

NI PXI/PXIe Contents DEVICE SPECIFICATIONS. 40 A Fault Insertion Unit

NI PXI/PXIe Contents DEVICE SPECIFICATIONS. 40 A Fault Insertion Unit DEVICE SPECIFICATIONS NI PXI/PXIe-2514 40 A Fault Insertion Unit This document lists specifications for the NI PXI/PXIe-2514 (NI 2514) fault insertion unit (FIU) switch module. All specifications are subject

More information

NI PXI/PXIe Contents DEVICE SPECIFICATIONS. 10 A Fault Insertion Unit

NI PXI/PXIe Contents DEVICE SPECIFICATIONS. 10 A Fault Insertion Unit DEVICE SPECIFICATIONS NI PXI/PXIe-2512 10 A Fault Insertion Unit This document lists specifications for the NI PXI/PXIe-2512 (NI 2512) fault insertion unit (FIU) switch module. All specifications are subject

More information

NI 2865A 0.3 A Matrix Cards for NI SwitchBlock

NI 2865A 0.3 A Matrix Cards for NI SwitchBlock SPECIFICATIONS NI 2865A 0.3 A Matrix Cards for NI SwitchBlock This document lists specifications for the NI 2865A matrix relay cards. All specifications are subject to change without notice. Visit ni.com/manuals

More information

NI PXI-2521 Specifications 40-Channel DPST Relay Module

NI PXI-2521 Specifications 40-Channel DPST Relay Module NI PXI-2521 Specifications 40-Channel DPST Relay Module This document lists specifications for the NI PXI-2521 general-purpose relay module. All specifications are subject to change without notice. Visit

More information

NI PXI/PXIe-2529 Specifications

NI PXI/PXIe-2529 Specifications NI PXI/PXIe-2529 Specifications 128-Crosspoint Relay Matrix This document lists specifications for the NI PXI/PXIe-2529 (NI 2529) matrix module. All specifications are subject to change without notice.

More information

NI PXI/PXIe Contents. About These Specifications DEVICE SPECIFICATIONS. Quad 2 1 Terminated Multiplexer

NI PXI/PXIe Contents. About These Specifications DEVICE SPECIFICATIONS. Quad 2 1 Terminated Multiplexer DEVICE SPECIFICATIONS NI PXI/PXIe-2542 Quad 2 1 Terminated Multiplexer This document lists specifications for the NI PXI/PXIe-2542 (NI 2542) multiplexer module. All specifications are subject to change

More information

NI PXI-2520 Specifications 80-Channel SPST Relay Module

NI PXI-2520 Specifications 80-Channel SPST Relay Module NI PXI-2520 Specifications 80-Channel SPST Relay Module This document lists specifications for the NI PXI-2520 general-purpose relay module. All specifications are subject to change without notice. Visit

More information

NI PXI Contents DEVICE SPECIFICATIONS. RF Attenuator

NI PXI Contents DEVICE SPECIFICATIONS. RF Attenuator DEVICE SPECIFICATIONS NI PXI-5695 RF Attenuator This document lists the specifications of the NI PXI-5695 (NI 5695) RF attenuator. Specifications are warranted by design and under the following conditions

More information

USRP Contents. Definitions. Conditions SPECIFICATIONS. Software Defined Radio Device

USRP Contents. Definitions. Conditions SPECIFICATIONS. Software Defined Radio Device SPECIFICATIONS USRP-2922 Software Defined Radio Device Contents Definitions...1 Conditions... 1 Transmitter... 2 Receiver... 2 Power... 3 Physical Characteristics... 3 Environment...4 Operating Environment...4

More information

USRP Contents. Definitions. Conditions SPECIFICATIONS. Software Defined Radio Reconfigurable Device

USRP Contents. Definitions. Conditions SPECIFICATIONS. Software Defined Radio Reconfigurable Device SPECIFICATIONS USRP-2944 Software Defined Radio Reconfigurable Device Contents Definitions...1 Conditions... 1 Transmitter... 2 Receiver... 2 Power... 3 Onboard DRAM...3 Physical Characteristics... 3 Environment...4

More information

USRP Contents. Definitions SPECIFICATIONS. Software Defined Radio Reconfigurable Device

USRP Contents. Definitions SPECIFICATIONS. Software Defined Radio Reconfigurable Device SPECIFICATIONS USRP-2943 Software Defined Radio Reconfigurable Device These specifications apply to the USRP-2943 40 MHz Software Defined Radio Device and the USRP-2943 120 MHz Software Defined Radio Device.

More information

USRP Contents. Definitions. Conditions SPECIFICATIONS. Software Defined Radio Device

USRP Contents. Definitions. Conditions SPECIFICATIONS. Software Defined Radio Device SPECIFICATIONS USRP-2921 Software Defined Radio Device Contents Definitions...1 Conditions... 1 Transmitter... 2 Receiver... 2 Half-Duplex Device... 3 Power... 3 Physical Characteristics... 4 Environment...4

More information

USRP Contents. Definitions SPECIFICATIONS. 50 MHz to 2.2 GHz Tunable RF Transceiver

USRP Contents. Definitions SPECIFICATIONS. 50 MHz to 2.2 GHz Tunable RF Transceiver SPECIFICATIONS USRP-2950 50 MHz to 2.2 GHz Tunable RF Transceiver These specifications apply to the USRP-2950 40 MHz Software Defined Radio Device and the USRP-2950 120 MHz Software Defined Radio Device.

More information

1- or 2-Port, High-Speed, Flexible Data Rate PXI CAN Interface Module

1- or 2-Port, High-Speed, Flexible Data Rate PXI CAN Interface Module SPECIFICATIONS PXI-8512 1- or 2-Port, High-Speed, Flexible Data Rate PXI CAN Interface Module This document lists specifications for the PXI-8512 1-port and 2-port CAN interface module. Definitions Warranted

More information

NI PXI/PXIe-2540 Specifications

NI PXI/PXIe-2540 Specifications NI PXI/PXIe-254 Specifications 35 MHz 8 9 5 Ω Matrix This document lists specifications for the NI PXI/PXIe-254 (NI 254) matrix module. All specifications are subject to change without notice. Visit ni.com/manuals

More information

100-SPST (latching), 50-DPST. Refer to the NI Switches Help at ni.com/manuals for detailed topology information.

100-SPST (latching), 50-DPST. Refer to the NI Switches Help at ni.com/manuals for detailed topology information. DEVICE SPECIFICATIONS NI PXI/PXIe-2569 100-Channel SPST Relay Module This document lists specifications for the NI PXI/PXIe-2569 (PXI/PXIe-2569) generalpurpose relay module. All specifications are subject

More information

USRP Contents. Definitions SPECIFICATIONS. 10 MHz to 6 GHz Tunable RF Transceiver

USRP Contents. Definitions SPECIFICATIONS. 10 MHz to 6 GHz Tunable RF Transceiver SPECIFICATIONS USRP-2954 10 MHz to 6 GHz Tunable RF Transceiver The USRP-2954 contains a GPS-disciplined oscillator (GPSDO), which enables you to lock the internal clocks to a GPS reference signal, synchronize

More information

NI PXI/PXIe-2541 Specifications 300 MHz Ω Matrix

NI PXI/PXIe-2541 Specifications 300 MHz Ω Matrix NI PXI/PXIe-2541 Specifications 3 MHz 8 12 5 Ω Matrix This document lists specifications for the NI PXI/PXIe-2541 (NI 2541) matrix module. All specifications are subject to change without notice. Visit

More information

PXI Contents SPECIFICATIONS. ±20 V, 40 W PXI Source Measure Unit

PXI Contents SPECIFICATIONS. ±20 V, 40 W PXI Source Measure Unit SPECIFICATIONS PXI-4130 ±20 V, 40 W PXI Source Measure Unit These specifications apply to the PXI-4130 with APS-4100 auxiliary power supply and to the PXI-4130 without auxiliary power supply. Contents

More information

CDA Contents. Definitions SPECIFICATIONS. Clock Distribution Device

CDA Contents. Definitions SPECIFICATIONS. Clock Distribution Device SPECIFICATIONS CDA-2990 Clock Distribution Device These specifications apply to the CDA-2990 Clock Distribution Device and the CDA-2990 Clock Distribution Device with GPSDO. When not otherwise specified,

More information

PXIe Contents SPECIFICATIONS. RF Amplifier

PXIe Contents SPECIFICATIONS. RF Amplifier SPECIFICATIONS PXIe-5698 RF Amplifier Contents Definitions...2 Conditions... 2 Amplitude...3 Minimal Gain... 3 Noise Figure...4 Average Noise Level... 5 Absolute Amplitude Accuracy...7 Spurious Responses...8

More information

PXI Contents. Definitions SPECIFICATIONS. ±100 V, 2 W Precision PXI Source Measure Unit. These specifications apply to the PXI-4132.

PXI Contents. Definitions SPECIFICATIONS. ±100 V, 2 W Precision PXI Source Measure Unit. These specifications apply to the PXI-4132. SPECIFICATIONS PXI-4132 ±100 V, 2 W Precision PXI Source Measure Unit These specifications apply to the PXI-4132. Contents Definitions...1 Conditions... 2 Device Capabilities... 2 SMU Specifications...

More information

PXIe Contents SPECIFICATIONS. RF Preselector Module

PXIe Contents SPECIFICATIONS. RF Preselector Module SPECIFICATIONS PXIe-5693 RF Preselector Module Contents Definitions...2 Conditions... 2...2 Preselector Filters...3 Notch Filters...5 Amplitude...6 Gain...6 Gain Range...6 Gain Accuracy...7 Low- Bypass

More information

1- or 2-Port, Software-Selectable PXI CAN Interface Module

1- or 2-Port, Software-Selectable PXI CAN Interface Module SPECIFICATIONS PXI-8513 1- or 2-Port, Software-Selectable PXI CAN Interface Module This document lists specifications for the PXI-8513 1-port and 2-port CAN interface module. Definitions Warranted specifications

More information

NI PXI/PXIe-2527 Specifications

NI PXI/PXIe-2527 Specifications NI PXI/PXIe-2527 Specifications 32 1 Relay Multiplexer This document lists specifications for the NI PXI/PXIe-2527 (NI 2527) 32 1 multiplexer relay module. All specifications are subject to change without

More information

High-Speed/Flexible Data-Rate CAN Characteristics 5 VDC

High-Speed/Flexible Data-Rate CAN Characteristics 5 VDC SPECIFICATIONS TRC-8543 CAN HS/FD or LS/FT Transceiver Cable The following specifications are typical for the range -40 C to 70 C unless otherwise noted. High-Speed/Flexible Data-Rate CAN Characteristics

More information

PXI Contents SPECIFICATIONS. 1.3 GHz RF Analog Signal Generator

PXI Contents SPECIFICATIONS. 1.3 GHz RF Analog Signal Generator SPECIFICATIONS PXI-5650 1.3 GHz RF Analog Signal Generator Contents Definitions...2 Conditions... 2 Frequency...2 Frequency Settling Time... 3 Reference Clock...3 Internal Clock...3 Internal Reference

More information

PXI Contents SPECIFICATIONS. 6.6 GHz RF Analog Signal Generator

PXI Contents SPECIFICATIONS. 6.6 GHz RF Analog Signal Generator SPECIFICATIONS PXI-5652 6.6 GHz RF Analog Signal Generator Contents Definitions...2 Conditions... 2 Frequency...2 Frequency Settling Time... 3 Reference Clock...3 Internal Clock...3 Internal Reference

More information

PXIe Contents SPECIFICATIONS. 3.3 GHz RF Analog Signal Generator

PXIe Contents SPECIFICATIONS. 3.3 GHz RF Analog Signal Generator SPECIFICATIONS PXIe-5651 3.3 GHz RF Analog Signal Generator Contents Definitions...2 Conditions... 2 Frequency...2 Frequency Settling Time... 3 Reference Clock...3 Internal Clock...3 Internal Reference

More information

100 MHz Bandwidth, 12-Bit PXI Waveform Generator

100 MHz Bandwidth, 12-Bit PXI Waveform Generator SPECIFICATIONS PXI-5404 100 MHz Bandwidth, 12-Bit PXI Waveform Generator Contents Conditions... 1 CH 0 Outputs... 2 CH 0 SINE Out... 2 CH 0 CLOCK Out...4 PFI 0 I/O...5 REF IN... 6 REF OUT... 7 Start Trigger...

More information

NI PXI-2532 Specifications

NI PXI-2532 Specifications NI PXI-2532 Specifications 512-Crosspoint, 1-Wire Matrix This document lists specifications for the National Instruments PXI-2532 512-crosspoint, 1-wire matrix. All specifications are subject to change

More information

NI PXI-2797 Specifications 40 GHz 6 1 Terminated 50 Ω Multiplexer

NI PXI-2797 Specifications 40 GHz 6 1 Terminated 50 Ω Multiplexer NI PXI-2797 Specifications 40 GHz 6 1 Terminated 50 Ω Multiplexer This document lists specifications for the NI PXI-2797 terminated multiplexer module. All specifications are subject to change without

More information

This document lists the specifications for the NI PXI The PXI-5900 is a differential amplifier.

This document lists the specifications for the NI PXI The PXI-5900 is a differential amplifier. DEVICE SPECIFICATIONS NI PXI-5900 Differential Amplifier This document lists the specifications for the NI PXI-5900. The PXI-5900 is a differential amplifier. Contents PXI-5900 Specifications... 1 Analog

More information

PXIe Contents SPECIFICATIONS. 250 khz to 20 GHz RF Analog Signal Generator

PXIe Contents SPECIFICATIONS. 250 khz to 20 GHz RF Analog Signal Generator SPECIFICATIONS PXIe-5654 250 khz to 20 GHz RF Analog Signal Generator These specifications apply to the PXIe-5654 RF Analog Signal Generator with up to 10 GHz or 20 GHz frequency and the PXIe-5696 Amplitude

More information

PXIe Contents SPECIFICATIONS. 2-Channel, 60 V, 1 A PXI Programmable Power Supply. These specifications apply to the PXIe-4112.

PXIe Contents SPECIFICATIONS. 2-Channel, 60 V, 1 A PXI Programmable Power Supply. These specifications apply to the PXIe-4112. SPECIFICATIONS PXIe-4112 2-Channel, 60 V, 1 A PXI Programmable Power Supply These specifications apply to the PXIe-4112. Contents Definitions...2 Conditions... 2 Cleaning the Module...2 Device Capabilities...

More information

PXIe Contents. Definitions SPECIFICATIONS. 8.5 GHz Vector Network Analyzer

PXIe Contents. Definitions SPECIFICATIONS. 8.5 GHz Vector Network Analyzer SPECIFICATIONS PXIe-5632 8.5 GHz Vector Network Analyzer Contents Definitions...1 Conditions... 2 General Information...2 Source Characteristics...3 Receiver Characteristics...5 Measurement Speed... 6

More information

SA1500X. Operating Basics. Cautions DEVICE SPECIFICATIONS. High Impedance Active Probe

SA1500X. Operating Basics. Cautions DEVICE SPECIFICATIONS. High Impedance Active Probe DEVICE SPECIFICATIONS SA1500X High Impedance Active Probe This document lists specifications for the SA1500X active probe, which can contact adjacent square pins to 2.54 mm pitch simultaneously. The housing

More information

PXIe Contents. Definitions SPECIFICATIONS. 8.5 GHz Vector Network Analyzer

PXIe Contents. Definitions SPECIFICATIONS. 8.5 GHz Vector Network Analyzer SPECIFICATIONS PXIe-5632 8.5 GHz Vector Network Analyzer Contents Definitions...1 Conditions... 2 General Information...2 Source Characteristics...3 Receiver Characteristics...5 Measurement Speed... 6

More information

NI USB Contents DEVICE SPECIFICATIONS. 50 MS/s Bus-Powered USB Oscilloscope

NI USB Contents DEVICE SPECIFICATIONS. 50 MS/s Bus-Powered USB Oscilloscope DEVICE SPECIFICATIONS NI USB-5132 50 MS/s Bus-Powered USB Oscilloscope This document lists specifications for the NI USB-5132 (NI 5132). Unless otherwise noted, these specifications are valid for the following

More information

4-Channel, ±6 V, 500 ma Precision PXI Source Measure Unit

4-Channel, ±6 V, 500 ma Precision PXI Source Measure Unit SPECIFICATIONS PXIe-4145 4-Channel, ±6 V, 500 ma Precision PXI Source Measure Unit These specifications apply to the PXIe-4145. Contents Definitions...1 Conditions... 2 Device Capabilities... 2 SMU Specifications...

More information

4-Channel, ±24 V, 150 ma PXI Source Measure Unit

4-Channel, ±24 V, 150 ma PXI Source Measure Unit SPECIFICATIONS PXIe-4142 4-Channel, ±24 V, 150 ma PXI Source Measure Unit These specifications apply to the PXIe-4142. Contents Definitions...1 Conditions... 2 Device Capabilities... 2 SMU Specifications...

More information

4-Channel ±10 V, 100 ma, Precision PXI Source Measure Unit

4-Channel ±10 V, 100 ma, Precision PXI Source Measure Unit SPECIFICATIONS PXIe-4141 4-Channel ±10 V, 100 ma, Precision PXI Source Measure Unit These specifications apply to the PXIe-4141. Contents Definitions...1 Conditions... 2 Device Capabilities... 2 SMU Specifications...

More information

4-Channel ±10 V, 100 ma, Precision PXI Source Measure Unit

4-Channel ±10 V, 100 ma, Precision PXI Source Measure Unit SPECIFICATIONS PXIe-4141 4-Channel ±10 V, 100 ma, Precision PXI Source Measure Unit These specifications apply to the PXIe-4141. Contents Definitions...1 Conditions... 2 Device Capabilities... 2 SMU Specifications...

More information

Note Using the NI 5751/5751B in a manner not described in this document may impair the protection that the NI 5751/5751B provides.

Note Using the NI 5751/5751B in a manner not described in this document may impair the protection that the NI 5751/5751B provides. DEVICE SPECIFICATIONS NI 5751/5751B 50 MS/s Digitizer Adapter Module This document lists specifications for the NI 5751/5751B adapter module. Pair these specifications with the specifications listed in

More information

4-Channel, ±24 V, 150 ma Precision PXI Source Measure Unit

4-Channel, ±24 V, 150 ma Precision PXI Source Measure Unit SPECIFICATIONS PXIe-4143 4-Channel, ±24 V, 150 ma Precision PXI Source Measure Unit These specifications apply to the PXIe-4143. Contents Definitions...1 Conditions... 2 Device Capabilities... 2 SMU Specifications...

More information

PCI Express, 6½-Digit, ±300 V Digital Multimeter Device

PCI Express, 6½-Digit, ±300 V Digital Multimeter Device SPECIFICATIONS PCIe-4065 PCI Express, 6½-Digit, ±300 V Digital Multimeter Device These specifications apply to the PCIe-4065. Contents Definitions...1 Conditions... 2 DC Specifications... 2 DC System Speed

More information

USRP Contents. Definitions SPECIFICATIONS. USRP Software Defined Radio Stand-Alone Device

USRP Contents. Definitions SPECIFICATIONS. USRP Software Defined Radio Stand-Alone Device SPECIFICATIONS USRP-2974 USRP Software Defined Radio Stand-Alone Device Contents Definitions...1 Conditions... 2 Controller... 2 FPGA and Baseband... 2 RF...3 Transmitter... 3 Receiver... 3 GPS Disciplined

More information

NI PXI-2557 Specifications

NI PXI-2557 Specifications NI PXI-2557 Specifications 2.5 GHz 75 8 x 1 Multiplexer (SP8T) This document lists specifications for the NI PXI-2557 multiplexer module. All specifications are subject to change without notice. Visit

More information

16-Bit, 120 MS/s, 12 Channel DC/16 Channel AC Receiver Adapter Module

16-Bit, 120 MS/s, 12 Channel DC/16 Channel AC Receiver Adapter Module SPECIFICATIONS NI 5753 16-Bit, 120 MS/s, 12 Channel DC/16 Channel AC Receiver Adapter Module This document lists specifications for the NI 5753 adapter module. Pair these specifications with the specifications

More information

PXIe Contents SPECIFICATIONS. ±60 V, 3 A System PXI Source Measure Unit. These specifications apply to the PXIe-4138.

PXIe Contents SPECIFICATIONS. ±60 V, 3 A System PXI Source Measure Unit. These specifications apply to the PXIe-4138. SPECIFICATIONS PXIe-4138 ±60 V, 3 A System PXI Source Measure Unit These specifications apply to the PXIe-4138. Contents Definitions...2 Conditions... 2 Cleaning Statement... 2 Device Capabilities... 2

More information

PXIe, 6½-Digit, ±300 V, Onboard 1.8 MS/s Isolated Digitizer,PXI Digital Multimeter

PXIe, 6½-Digit, ±300 V, Onboard 1.8 MS/s Isolated Digitizer,PXI Digital Multimeter SPECIFICATIONS PXIe-4080 PXIe, 6½-Digit, ±300 V, Onboard 1.8 MS/s Isolated Digitizer,PXI Digital Multimeter These specifications apply to the PXIe-4080. Contents Definitions...2 Conditions... 2 DC Voltage

More information

SCXI MHz Quad 8x1 50 Ω Multiplexer

SCXI MHz Quad 8x1 50 Ω Multiplexer SPECIFICATIONS SCXI -1193 500 MHz Quad 50 Ω Multiplexer This document lists specifications for the SCXI-1193 multiplexer module. All specifications are subject to change without notice. Visit ni.com/manuals

More information

NI roborio. Contents. Processor SPECIFICATIONS. RIO Device for Robotics

NI roborio. Contents. Processor SPECIFICATIONS. RIO Device for Robotics SPECIFICATIONS NI roborio RIO Device for Robotics This document provides specifications for the NI roborio. These specifications are typical for the 0 C to 40 C operating temperature range unless otherwise

More information

6½-Digit, ±300 V, 1.8 MS/s Isolated Digitizer Included, PCI Digital Multimeter Device

6½-Digit, ±300 V, 1.8 MS/s Isolated Digitizer Included, PCI Digital Multimeter Device SPECIFICATIONS PCI-4070 6½-Digit, ±300 V, 1.8 MS/s Isolated Digitizer Included, PCI Digital Multimeter Device These specifications apply to the PCI-4070. Contents Definitions...2 Conditions... 2 DC Specifications...

More information

PXIe Contents SPECIFICATIONS. ±200 V, 1 A System PXI Source Measure Unit. These specifications apply to the PXIe-4136.

PXIe Contents SPECIFICATIONS. ±200 V, 1 A System PXI Source Measure Unit. These specifications apply to the PXIe-4136. SPECIFICATIONS PXIe-4136 ±200 V, 1 A System PXI Source Measure Unit These specifications apply to the PXIe-4136. Contents Definitions...2 Conditions... 2 Cleaning Statement... 2 Device Capabilities...

More information

NI PXI-2555 Specifications

NI PXI-2555 Specifications NI PXI-2555 Specifications 2.5 GHz Terminated 4 x 1 Multiplexer (SP4T) This document lists specifications for the NI PXI-2555 multiplexer module. All specifications are subject to change without notice.

More information

Current ON state current ma minimum, 6 ma typical, 10 ma maximum OFF state current ma maximum

Current ON state current ma minimum, 6 ma typical, 10 ma maximum OFF state current ma maximum DEVICE SPECIFICATIONS NI 6624 This document lists the specifications for the NI PCI/PXI-6624 device. These specifications are typical at 25 C unless otherwise noted. Refer to the NI 6624 User Manual for

More information

PXIe Contents SPECIFICATIONS. ±60 V, 3 A Precision System PXI Source Measure Unit. These specifications apply to the PXIe-4139.

PXIe Contents SPECIFICATIONS. ±60 V, 3 A Precision System PXI Source Measure Unit. These specifications apply to the PXIe-4139. SPECIFICATIONS PXIe-4139 ±60 V, 3 A Precision System PXI Source Measure Unit These specifications apply to the PXIe-4139. Contents Definitions...2 Conditions... 2 Cleaning Statement... 2 Device Capabilities...

More information

PXIe Contents SPECIFICATIONS. ±200 V, 1 A Precision System PXI Source Measure Unit. These specifications apply to the PXIe-4137.

PXIe Contents SPECIFICATIONS. ±200 V, 1 A Precision System PXI Source Measure Unit. These specifications apply to the PXIe-4137. SPECIFICATIONS PXIe-4137 ±200 V, 1 A Precision System PXI Source Measure Unit These specifications apply to the PXIe-4137. Contents Definitions...2 Conditions... 2 Cleaning Statement... 2 Device Capabilities...

More information

Power Amplifier. Input Characteristics. SPECIFICATIONS NI PXIe-4610 Power Amplifier. Signal Range

Power Amplifier. Input Characteristics. SPECIFICATIONS NI PXIe-4610 Power Amplifier. Signal Range SPECIFICATIONS NI PXIe-4610 Power Amplifier This document lists specifications for the NI PXIe-4610 Power Amplifier. These specifications are typical at 25 ºC unless otherwise stated. The operating range

More information

Specifications are typical and valid from -40 C to +85 C unless otherwise noted. Galvanic isolation between channels and to chassis

Specifications are typical and valid from -40 C to +85 C unless otherwise noted. Galvanic isolation between channels and to chassis SPECIFICATIONS FD-11603 8-Channel Voltage Input Device for FieldDAQ Conditions Specifications are typical and valid from -40 C to +85 C unless otherwise noted. Input Characteristics Number of channels

More information

NI SCXI Specifications

NI SCXI Specifications NI SCXI -1127 Specifications 32-Channel Relay Multiplexer/Matrix Input Characteristics This document lists specifications for the NI SCXI-1127 multiplexer/matrix module. All specifications are subject

More information

Input Characteristics. Measurement Range. SPECIFICATIONS NI PXIe-4357

Input Characteristics. Measurement Range. SPECIFICATIONS NI PXIe-4357 SPECIFICATIONS NI PXIe-4357 This document lists specifications for the NI PXIe-4357 module. These specifications are typical for the range of 0 C to 55 C unless otherwise stated. The system must be allowed

More information

PXI Contents SPECIFICATIONS. 6½-Digit, ±300 V, Onboard 1.8 MS/s Isolated Digitizer, L and C Measurement Support, PXI Digital Multimeter

PXI Contents SPECIFICATIONS. 6½-Digit, ±300 V, Onboard 1.8 MS/s Isolated Digitizer, L and C Measurement Support, PXI Digital Multimeter SPECIFICATIONS PXI-4072 6½-Digit, ±300 V, Onboard 1.8 MS/s Isolated Digitizer, L and C Measurement Support, PXI Digital Multimeter These specifications apply to the PXI-4072. Contents Definitions...2 Conditions...

More information

80 MHz Bandwidth, 16-Bit PXI Waveform Generator. These specifications apply to the one-channel and two-channel PXIe-5433.

80 MHz Bandwidth, 16-Bit PXI Waveform Generator. These specifications apply to the one-channel and two-channel PXIe-5433. SPECIFICATIONS PXIe-5433 80 MHz Bandwidth, 16-Bit PXI Waveform Generator These specifications apply to the one-channel and two-channel PXIe-5433. Contents Definitions...1 Conditions... 2 Analog Output...2

More information

PXIe Contents SPECIFICATIONS. Precision, 10 fa Sensitivity Low-Current PXI Source Measure Unit. These specifications apply to the PXIe-4135.

PXIe Contents SPECIFICATIONS. Precision, 10 fa Sensitivity Low-Current PXI Source Measure Unit. These specifications apply to the PXIe-4135. SPECIFICATIONS PXIe-4135 Precision, 10 fa Sensitivity Low-Current PXI Source Measure Unit These specifications apply to the PXIe-4135. Contents Definitions...2 Conditions... 2 Cleaning Statement... 2 Device

More information

PXI Contents SPECIFICATIONS. 8-Channel, 12-Bit, 60 MHz PXI Oscilloscope

PXI Contents SPECIFICATIONS. 8-Channel, 12-Bit, 60 MHz PXI Oscilloscope SPECIFICATIONS PXI-5105 8-Channel, 12-Bit, 60 MHz PXI Oscilloscope Contents Definitions...2 Conditions... 2 Vertical... 3 Analog Input... 3 Impedance and Coupling... 3 Voltage Levels...3 Accuracy... 3

More information

PCI Contents SPECIFICATIONS. 8-Channel, 12-Bit, 60 MHz PCI Oscilloscope Device

PCI Contents SPECIFICATIONS. 8-Channel, 12-Bit, 60 MHz PCI Oscilloscope Device SPECIFICATIONS PCI-5105 8-Channel, 12-Bit, 60 MHz PCI Oscilloscope Device Contents Definitions...2 Conditions... 2 Vertical... 3 Analog Input... 3 Impedance and Coupling... 3 Voltage Levels...3 Accuracy...

More information

8-Channel, 12-Bit, 60 MHz PXI Express Oscilloscope

8-Channel, 12-Bit, 60 MHz PXI Express Oscilloscope SPECIFICATIONS PXIe-5105 8-Channel, 12-Bit, 60 MHz PXI Express Oscilloscope Contents Definitions...2 Conditions... 2 Vertical... 3 Analog Input... 3 Impedance and Coupling... 3 Voltage Levels...3 Accuracy...

More information

PXIe, 40 MHz Bandwidth, 16-Bit PXI Waveform Generator. These specifications apply to the one-channel and two-channel PXIe-5423.

PXIe, 40 MHz Bandwidth, 16-Bit PXI Waveform Generator. These specifications apply to the one-channel and two-channel PXIe-5423. SPECIFICATIONS PXIe-5423 PXIe, 40 MHz Bandwidth, 16-Bit PXI Waveform Generator These specifications apply to the one-channel and two-channel PXIe-5423. Contents Definitions...1 Conditions... 2 Analog Output...2

More information

mmwave Transceiver System

mmwave Transceiver System SPECIFICATIONS mmwave Transceiver System 2 GHz Bandwidth mmwave Transceiver System Contents Definitions...1 Conditions... 2 System Performance and Characteristics...2 24.25 GHz to 33.4 GHz mmwave Transceiver

More information

PXIe, 80 MHz Bandwidth, 16-Bit PXI Waveform Generator. These specifications apply to the one-channel and two-channel PXIe-5433.

PXIe, 80 MHz Bandwidth, 16-Bit PXI Waveform Generator. These specifications apply to the one-channel and two-channel PXIe-5433. SPECIFICATIONS PXIe-5433 PXIe, 80 MHz Bandwidth, 16-Bit PXI Waveform Generator These specifications apply to the one-channel and two-channel PXIe-5433. Contents Definitions...1 Conditions... 2 Analog Output...2

More information

16 AI (16-Bit, 250 ks/s), 4 DI, 4 DO USB Multifunction I/O Device

16 AI (16-Bit, 250 ks/s), 4 DI, 4 DO USB Multifunction I/O Device SPECIFICATIONS USB-6210 16 AI (16-Bit, 250 ks/s), 4 DI, 4 DO USB Multifunction I/O Device Definitions Warranted specifications describe the performance of a model under stated operating conditions and

More information

8-Ch 24 V Sinking DI, 8-Ch 24 V Sourcing DO SIL3 Capable

8-Ch 24 V Sinking DI, 8-Ch 24 V Sourcing DO SIL3 Capable DATASHEET NI 9350 8-Ch 24 V Sinking DI, 8-Ch 24 V Sourcing DO SIL3 Capable Certified SIL3 capable Safety response time

More information

NI 9220 DATASHEET. 16 AI, ±10 V, 16 Bit, 100 ks/s/ch Simultaneous. DSUB or push-in springterminal. 250 Vrms, CAT II, channelto-earth

NI 9220 DATASHEET. 16 AI, ±10 V, 16 Bit, 100 ks/s/ch Simultaneous. DSUB or push-in springterminal. 250 Vrms, CAT II, channelto-earth DATASHEET NI 9220 16 AI, ±10 V, 16 Bit, 100 ks/s/ch Simultaneous DSUB or push-in springterminal connectivity 250 Vrms, CAT II, channelto-earth isolation (spring terminal); 60 VDC, CAT I, channel-to-earth

More information

Analog Characteristics

Analog Characteristics SPECIFICATIONS NI PXIe-4322 This document lists specifications for the NI PXIe-4322 module. These specifications are typical for the range of 0 C to 55 C unless otherwise stated. The system must be allowed

More information

PXI Contents SPECIFICATIONS. 1 GHz Bandwidth, 2 GS/s, 8-Bit PXI Oscilloscope

PXI Contents SPECIFICATIONS. 1 GHz Bandwidth, 2 GS/s, 8-Bit PXI Oscilloscope SPECIFICATIONS PXI-5154 1 GHz Bandwidth, 2 GS/s, 8-Bit PXI Oscilloscope Contents Definitions...2 Conditions... 2 Vertical... 3 Analog Input (Channel 0 and Channel 1)... 3 Impedance and Coupling... 3 Voltage

More information

100 MHz, 32-Channel, 5 V PXI Digital Waveform Instrument

100 MHz, 32-Channel, 5 V PXI Digital Waveform Instrument SPECIFICATIONS PXI-6542 100 MHz, 32-Channel, 5 V PXI Digital Waveform Instrument These specifications apply to the PXI-6542 with 1 MBit, 8 MBit, and 64 MBit of memory per channel. Contents Hot Surface

More information

PXI Contents SPECIFICATIONS. 300 MHz Bandwidth, 2 GS/s, 8-Bit PXI Oscilloscope

PXI Contents SPECIFICATIONS. 300 MHz Bandwidth, 2 GS/s, 8-Bit PXI Oscilloscope SPECIFICATIONS PXI-5152 300 MHz Bandwidth, 2 GS/s, 8-Bit PXI Oscilloscope Contents Definitions...2 Conditions... 2 Vertical... 3 Analog Input (Channel 0 and Channel 1)... 3 Impedance and Coupling... 3

More information

GETTING STARTED GUIDE NI Port DeviceNet Module

GETTING STARTED GUIDE NI Port DeviceNet Module GETTING STARTED GUIDE NI 9882 1-Port DeviceNet Module This document explains how to connect to the NI 9882. The NI 9882 module requires the latest NI-DeviceNet software to be installed. The latest version

More information

PXIe-6570 DEVICE SPECIFICATIONS. 32-Channel Digital Pattern Instrument

PXIe-6570 DEVICE SPECIFICATIONS. 32-Channel Digital Pattern Instrument DEVICE SPECIFICATIONS PXIe-6570 32-Channel Digital Pattern Instrument This document lists the specifications for the PXIe-6570. When using the PXIe-6570 in the Semiconductor Test System, refer to the Semiconductor

More information

NI 9207 DATASHEET. 16 AI, ±20 ma/±10 V, 24 Bit, 500 S/s Aggregate

NI 9207 DATASHEET. 16 AI, ±20 ma/±10 V, 24 Bit, 500 S/s Aggregate DATASHEET NI 9207 16 AI, ±20 ma/±10 V, 24 Bit, 500 S/s Aggregate 8 current and 8 voltage inputs, 500 S/s ±20 ma current inputs, ±10 V voltage inputs, 24-bit resolution High-Resolution Mode with 50/60 Hz

More information

NI 9881 GETTING STARTED GUIDE. 1-Port CANopen Module

NI 9881 GETTING STARTED GUIDE. 1-Port CANopen Module GETTING STARTED GUIDE NI 9881 1-Port CANopen Module This document explains how to connect to the NI 9881. The NI 9881 module requires the latest NI-CANopen software to be installed. The latest version

More information

NI 9216 DATASHEET. 8 RTD, 0 Ω to 400 Ω, 24 Bit, 400 S/s Aggregate, PT100

NI 9216 DATASHEET. 8 RTD, 0 Ω to 400 Ω, 24 Bit, 400 S/s Aggregate, PT100 DATASHEET NI 9216 8 RTD, 0 Ω to 400 Ω, 24 Bit, 400 S/s Aggregate, PT100 DSUB or spring-terminal connectivity 50 Hz/60 Hz noise rejection 250 Vrms, CAT II, channel-to-earth isolation (spring terminal);

More information

R Series for USB Multifunction RIO with Kintex-7 70T FPGA. may impair the protection the NI USB-7855R provides.

R Series for USB Multifunction RIO with Kintex-7 70T FPGA. may impair the protection the NI USB-7855R provides. SPECIFICATIONS NI USB-7855R R Series for USB Multifunction RIO with Kintex-7 70T FPGA This document contains the specifications for the NI USB-7855R. Specifications are typical at 25 C unless otherwise

More information

NI 9770 DATASHEET. 30 khz to 100 MHz, 50 Ω, AC Coupled RF Receiver Module

NI 9770 DATASHEET. 30 khz to 100 MHz, 50 Ω, AC Coupled RF Receiver Module DATASHEET NI 9770 30 khz to 100 MHz, 50 Ω, AC Coupled RF Receiver Module 1-channel, 320 ks/s Support for RF emissions measurements from 30 khz to 100 MHz Software-selectable bandwidth from 3.2 khz to 256

More information

PXIe Contents SPECIFICATIONS. 500 MHz, 2.5 GS/s, 10-Bit PXI Express Oscilloscope

PXIe Contents SPECIFICATIONS. 500 MHz, 2.5 GS/s, 10-Bit PXI Express Oscilloscope SPECIFICATIONS PXIe-5160 500 MHz, 2.5 GS/s, 10-Bit PXI Express Oscilloscope Contents Definitions...2 Conditions... 2 Vertical... 3 Analog Input... 3 Impedance and Coupling... 3 Voltage Levels...4 Accuracy...

More information

NI PXIe-5630 Specifications

NI PXIe-5630 Specifications NI PXIe-5630 Specifications RF Vector Network Analyzer This document lists specifications for the NI PXIe-5630 RF vector network analyzer (NI 5630). Specifications are warranted under the following conditions:

More information

4-Slot, Extended Temperature, Ethernet CompactDAQ Chassis

4-Slot, Extended Temperature, Ethernet CompactDAQ Chassis SPECIFICATIONS cdaq -9185 4-Slot, Extended Temperature, Ethernet CompactDAQ Chassis Definitions Warranted specifications describe the performance of a model under stated operating conditions and are covered

More information

8-Slot, Extended Temperature, Ethernet CompactDAQ Chassis

8-Slot, Extended Temperature, Ethernet CompactDAQ Chassis SPECIFICATIONS cdaq -9189 8-Slot, Extended Temperature, Ethernet CompactDAQ Chassis Definitions Warranted specifications describe the performance of a model under stated operating conditions and are covered

More information

GETTING STARTED GUIDE NI Port, High-Speed CAN Module. Français Deutsch 日本語한국어简体中文. ni.com/manuals

GETTING STARTED GUIDE NI Port, High-Speed CAN Module. Français Deutsch 日本語한국어简体中文. ni.com/manuals GETTING STARTED GUIDE NI 9862 1-Port, High-Speed CAN Module Français Deutsch 日本語한국어简体中文 ni.com/manuals This document explains how to connect to the National Instruments 9862. The NI 9862 module requires

More information

PXI Contents SPECIFICATIONS. 125 MHz, 2-Channel, 8-Bit PXI Oscilloscope

PXI Contents SPECIFICATIONS. 125 MHz, 2-Channel, 8-Bit PXI Oscilloscope SPECIFICATIONS PXI-5114 125 MHz, 2-Channel, 8-Bit PXI Oscilloscope Contents Definitions...2 Conditions... 2 Vertical... 3 Analog Input... 3 Impedance and Coupling... 3 Voltage Levels...3 Accuracy... 4

More information