QT-Brightek Corporation Dot Matrix
|
|
- Adela Jocelyn Blake
- 6 years ago
- Views:
Transcription
1 QT-Brightek Corporation Dot Matrix Part No.: GMZ21XX75_series Product: GMZ21XX75_series Date: September 18, 2015 Page 1 of 13
2 Table of Contents: Introduction... 3 Electrical / Optical Characteristic (Ta=25 o C)... 4 Absolute Maximum Rating... 4 Pin Configuration... 7 Characteristic Curves... 8 Solder Profile Package Dimensions Ordering Information Revision History Disclaimer Product: GMZ21XX75_series Date: September 18, 2015 Page 2 of 13
3 Introduction Feature: Low power consumption Packed in foam AlInGaP technology for R/S/Y/O/AG InGaN technology for IG/IB Z=C: Anode Row, Cathode column or A: Anode Column, Cathode Row XX= Color Description: These 2.1 5x7 dot matrix displays are made with white dots and a grey surface. Application: Instrument panels Indoor/Outdoor display board Audio equipment Certification & Compliance: TS16949 ISO9001 RoHS Compliant Dimension: Units: mm / tolerance = +/-0.25mm Product: GMZ21XX75_series Date: September 18, 2015 Page 3 of 13
4 Electrical / Optical Characteristic (Ta=25 o C) Anode Row, Cathode Column Product Anode Column, Cathode Row Material Color I F (ma) V F (V) λ D () I V () Typ. Max. Min. Typ. Max. GMC21R75 GMA21R75 AllnGaP Red GMC21S75 GMA21S75 AlInGaP Deep Red GMC21Y75 GMA21Y75 AllnGaP Yellow GMC21O75 GMA21O75 AllnGaP Orange GMC21AG75 GMA21AG75 AlInGaP GMC21IG75 GMA21IG75 InGaN Yellow Green True Green Typ GMC21IB75 GMA21IB75 InGaN Blue Absolute Maximum Rating Material P d (mw) Derating liner from 25 o C per dice (ma/ o C) I F (ma) I FP (ma)* V R (V) T OP ( o C) `T ST ( o C) AlInGaP to to +85 InGaN to to +85 *Duty 1KHz Luminous Intensity I V for I F =20mA R S T U Luminous Intensity I V for Deep I F =20mA P Q R Product: GMZ21XX75_series Date: September 18, 2015 Page 4 of 13
5 Luminous Intensity I V for I F =20mA R S T U Luminous Intensity I V for I F =20mA R S T U Luminous Intensity I V for Yellow I F =20mA M N O Luminous Intensity I V for True I F =20mA R S T U Luminous Intensity I V for I F =20mA K L M Dominant Wavelength λ D for I F =20mA Product: GMZ21XX75_series Date: September 18, 2015 Page 5 of 13
6 Dominant Wavelength λ D for Deep I F =20mA Dominant Wavelength λ D for I F =20mA Dominant Wavelength λ D for I F =20mA Dominant Wavelength λ D for Yellow I F =20mA Dominant Wavelength λ D for True I F =20mA Dominant Wavelength λ D for I F =20mA Product: GMZ21XX75_series Date: September 18, 2015 Page 6 of 13
7 Pin Configuration Anode Row, Cathode Column Anode Column, Cathode Row Product: GMZ21XX75_series Date: September 18, 2015 Page 7 of 13
8 Characteristic Curves AlInGaP Product: GMZ21XX75_series Date: September 18, 2015 Page 8 of 13
9 InGaN Product: GMZ21XX75_series Date: September 18, 2015 Page 9 of 13
10 Solder Profile Product: GMZ21XX75_series Date: September 18, 2015 Page 10 of 13
11 Package Dimensions Product: GMZ21XX75_series Date: September 18, 2015 Page 11 of 13
12 Ordering Information Product Anode Row, Cathode Column Anode Column, Cathode Row Orderable Part# Anode Row, Anode Cathode Column, Column Cathode Row GMC21R75 GMA21R75 GMC21R75 GMA21R75 GMC21S75 GMA21S75 GMC21S75 GMA21S75 GMC21Y75 GMA21Y75 GMC21Y75 GMA21Y75 GMC21O75 GMA21O75 GMC21O75 GMA21O75 GMC21AG75 GMA21AG75 GMC21AG75 GMA21AG75 GMC21IG75 GMA21IG75 GMC21IG75 GMA21IG75 GMC21IB75 GMA21IB75 GMC21IB75 GMA21IB75 Spec Range Iv=90 I F =20mA, λd=619 to 629 Iv=35 I F =20mA, λd=636 to 647 Iv=90 I F =20mA, λd=585 to 595 Iv=90 I F =20mA, λd=601 to 611 Iv=25 I F =20mA, λd=566 to 574 Iv=200 I F =20mA, λd=515 to 530 Iv=160 I F =20mA, λd=460 to 470 Quantity per foam Product: GMZ21XX75_series Date: September 18, 2015 Page 12 of 13
13 Revision History Description: Revision # Revision Date New Release of GMZ21XX75_series V1.0 05/27/2011 Add Blue and Green Color Spec. V1.2 07/13/2011 Amend to the new format V1.3 04/29/2013 Add binning/ add deep red and orange spec V1.4 09/18/2015 Disclaimer QT-BRIGHTEK reserves the right to make changes without further notice to any products herein to improve reliability, function or design. QT-BRIGHTEK does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. Life Support Policy QT-BRIGHTEK s products are not authorized for use as critical components in life support devices or systems without the express written approval of QT-BRIGHTEK. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Product: GMZ21XX75_series Date: September 18, 2015 Page 13 of 13
QT-Brightek High Power Series. 3W High Power LED
QT-Brightek High Power Series 3W High Power LED Part No.: QBHP684U-XXV series XX = Color Code V = 700mA Product: QBHP684U-XXV Series Date: April 28, 2015 Page 1 of 11 Table of Contents: Introduction...
More informationInolux 5mm Full-Color Through Hole Lamp HV-5RGBXX Series
Inolux HV-5RGBXX Series July 21, 2015 Version of 1.1 Page 1/11 DISCLAIMER INOLUX reserves the right to make changes without further notice to any products herein to improve reliability, function or design.
More informationQ825 8-PIN DIP PHOTOTRANSISTOR OPTOCOUPLER Feature: UL recognized (File # E338132) Creepage distance > 7.62mm
Feature: Certification & Compliance: High Isolation voltage between input and output Pb free and RoHS Compliant (Viso = 5000V rms) UL recognized (File # E338132) Creepage distance > 7.62mm VDE recognized
More informationQ817 series 4-PIN DC INPUT OPTOCOUPLER Feature: Certification & Compliance: Halogen Free
Feature: Certification & Compliance: Halogen Free Pb free and RoHS Compliant High Isolation voltage between input and output UL recognized (File # E338132) (Viso = 5000V rms) VDE recognized (File # 40030457)
More informationQT-Brightek Optocoupler Series
QT-Brightek Optocoupler Series 4-PIN Long Mini-Flat Phototransistor Optocoupler Part No.: QT101X-W Product: QT101X-W Date: September 13, 2018 Page 1 of 13 Table of Contents: Introduction... 3 Absolute
More informationProduct: Q814 Date: February 1, 2011 Page 1 of 13 Version# 1.2
Feature: High Isolation voltage between input and output (Viso = 5000V rms) Current transfer ration (CTR: Min. 20% at I F = ±1mA, V ce =5V) High collector-emitter voltage V CEO =80V Operating Temperature
More information14mm (0.56 inch) Four Digit CLOCK STICK DISPLAY
14mm (.56 inch) Four Digit Bright Red MSQC611C, MSQC614C High Efficiency Red MSQC691C, MSQC694C Green MSQC641C, MSQC644C PACKAGE DIMENSIONS 38.1 (1.5) Features Bright Bold Segments Common Anode/Cathode
More informationSURFACE MOUNT LED LAMP Super Bright (0603) Chip Type - Water Clear
PACKAGE DIMENSIONS.63 (1.6).55 (1.4).35 (.9).28 (.7).31 (.8).47 (1.2) TOP SIDE.12 (.3) FEATURES AllnGaP technology Ultra-miniature Industrial standard footprint Water clear optics Moisture-proof packaging
More informationSURFACE MOUNT LED LAMP 0805 Chip Type - Water Clear
85 Chip Type - Water Clear PACKAGE DIMENSIONS.87 (2.2).71 (1.8) R.8 (.2).57 (1.45).41 (5) TOP CATHODE MARK FEATURES Ultra-miniature and extremely low profile.55 (1.4).12 (.3) 2X Industrial standard footprint
More informationQT-Brightek Optocoupler Series
QT-Brightek Optocoupler Series 4-PIN DC Input Phototransistor Part No.: QTH217 Product: QTH217 Date: April 12, 2018 Page 1 of 13 Table of Contents: Introduction... 3 Absolute Maximum Rating... 4 Electrical
More information14mm (0.56 inch) Four Digit MULTIPLEX CLOCK STICK DISPLAY
14mm (.56 inch) Four Digit Bright Red MSQC6112C, MSQC6142C High Efficiency Red MSQC6912C, MSQC6942C Green MSQC6412C, MSQC6442C 12.7 (.5) PACKAGE DIMENSIONS 7.9 1 (.311) 8. (.3) Features Bright Bold Segments
More informationCNY17 & CNY17F 6-PIN DIP PHOTOTRANSISTOR OPTOCOUPLER Feature: UL recognized (File # E338132) Current transfer ratio
Feature: Certification & Compliance: High Isolation voltage between input and output Pb free and RoH Compliant (Viso = 5000V rms) UL recognized (File # E338132) Current transfer ratio VDE recognized (File
More informationSURFACE MOUNT LED LAMP SUPER BRIGHT 0805
PACKAGE DIMENSIONS.87 (2.2).71 (1.8).57 (1.45).41 (1.5) R.8 (.2) TOP CATHODE.55 (1.4).12 (.3) 2X.47 (1.2).41 (1.5).24 (.6) SIDE.16 (.4) 2X.47 (1.2) BOTTOM NOTE: + - POLARITY Dimensions for all drawings
More informationTIL111/TIL117/MCT2/MCT2E 6-PIN DIP PHOTOTRANSISTOR OPTOCOUPLER Feature: UL recognized (File # E338132) Creepage distance > 7.6mm
Feature: Certification & Compliance: High Isolation voltage between input and output Pb free and RoH Compliant (Viso = 5000V rms) UL recognized (File # E338132) Creepage distance > 7.6mm VDE recognized
More informationHarvatek Surface Mount LED Data Sheet HT-T168 Ultra-bright Series
Harvatek Surface Mount LED Data Sheet HT-T168 Ultra-bright Series Nov 05, 2007 Version of 1.1 Page 1/24 DISCLAIMER...3 PRODUCT SPECIFICATIONS...4 LABEL SPECIFICATIONS...5 PRODUCT CHARACTERISTICS... 11
More informationQT-Brightek Opto-Coupler Series 6-PIN DIP PHOTOCOUPLER SCHMITT TRIGGER
QT-Brightek Opto-Coupler Series 6-PIN DIP PHOTOCOUPLER Part No.: Product: Date: February 09, 2018 Page 1 of 18 Table of Contents: Introduction... 3 Absolute Maximum Rating... 6 Electrical Characteristic:
More informationSOLID STATE LED LAMP RECTANGULAR 2 X 5 mm LED LAMPS
MV57123 PACKAGE DIMENSIONS.25 (5.2).189 (4.8).85 (2.2).71 (1.8).37 (7.8).283 (7.2) 1.39 (26.4) MIN (anode).4 (1.).1 (2.54).2 (.5) NOTES: 1. Dimensions for all drawings are in inches (mm). 2. Lead spacing
More informationStandard 7-Segment SMD Display 10 mm
Standard 7-Segment SMD Display 10 mm DESCRIPTION The VDM.10.0 series are 10 mm SMD seven segment LED displays in a very compact package. The devices utilize AlInGaP on GaAs chip technology. PRODUCT GROUP
More informationFeatures. Red Green Yellow Orange Description
HDSM-431x/433x 0.39 (10.0mm) Single digit surface mount LED display Data Sheet Description This is 0.39 (10.0mm) height single digit display. This device utilizes AlInGaP / GaAs chips.this device is with
More informationData Sheet. HDSM-541x, HDSM-543x 0.56 (14.22mm) Dual digit surface mount LED display. Description. Features. Package Dimensions. Ordering Information
HDSM-51x, HDSM-5x.56 (1.mm) Dual digit surface mount LED display Data Sheet Description The HDSM-51x/5x is a dual digit display of.56 (1.mm) height. This device utilizes AlInGaP / GaAs chips and has a
More informationSUBMINIATURE T-3/4 LED DIFFUSED AND CLEAR LAMPS
PACKAGE DIMENSIONS FEATURES Subminiature T-3/4 transfer molded.276 (7.0) MIN Low package profile Axial leads Wide viewing angle SMT versions.002 (.06).031 (.78).023 (.58).075 (1.9) DIA.056 (1.44).048 (1.24)
More informationStandard 7-Segment SMD Display 10 mm
Standard 7-Segment SMD Display mm DESCRIPTION The VDM.A1 series are mm SMD seven segment LED displays in a very compact package. The devices utilize AlInGaP on GaAs chip technology. PRODUCT GROUP AND PACKAGE
More informationData Sheet. HDSM-291x/293x (7.0mm) Dual digit surface mount LED display. Features. Description. Package Dimensions. Ordering Information
HDSM-91x/9x.8 (7.mm) Dual digit surface mount LED display Data Sheet Description The HDSM-91x/9x is a dual digit display of.8 (7.mm) height. This device utilizes AlInGaP / GaAs chips and has a grey surface
More informationLTH3MM12V Series 3mm (T-1) Through Hole LED Built in Resistor for 12VDC
TM LTH3MM1V Series 3mm (T-1) Through Hole Built in Resistor for 1VDC LTH3MM1VFR4700 - Yellow Water-Clear T-1 (3 mm) HIGH BRIGHTNESS COLOR OPTIONS VIEWING ANGLE 30 / 35 1 Volt MSL Applications Automotive
More informationHDSM-431x/433x 0.39 (10.0mm) Single digit surface mount LED display. Features
HDSM-41x/4x.9 (1.mm) Single digit surface mount LED display Datasheet Description This is.9 (1.mm) height single digit display. This device utilizes AlInGaP / GaAs chips.this device is with top surface
More informationLTH3MM12V Series 3mm (T-1) Through Hole LED Built in Resistor for 12VDC
TM LTH3MM12V Series 3mm (T-1) Through Hole Built in Resistor for 12VDC LTH3MM12VFR4600 - Water-Clear T-1 (3 mm) HIGH BRIGHTNESS COLOR OPTIONS VIEWING ANGLE 30 / 35 12 Volt Applications Automotive Indoor
More informationLTH5MM12V Series 5mm (T-1 3/4) Through Hole LED Built in Resistor for 12VDC
TM LTH5MM12V Series 5mm (T-1 3/4) Through Hole Built in Resistor for 12VDC LTH5MM12VFR4100 - Red Water-Clear T-1 3/4 (5 mm) HIGH BRIGHTNESS COLOR OPTIONS VIEWING ANGLE 16 / 20 12 Volt Applications Automotive
More informationHigh Intensity LED in Ø 3 mm Tinted Non-Diffused Package
High Intensity LED in Ø 3 mm Tinted Non-Diffused Package DESCRIPTION 19222 This device has been designed to meet the increasing demand for AlInGaP technology. It is housed in a 3 mm clear plastic package.
More informationPHOTOTRANSISTOR REFLECTIVE OBJECT SENSORS
PACKAGE DIMENSIONS 24.0 (609.60) MIN #26 AWG (A) (K) 0.226 (5.74) 0.020 (0.51) 4X (E) (C) 0.300 (7.62) E S FUNCTION (C) COLLECTOR (E) EMITTER (K) CATHODE (A) ANODE 0.150 (3.81) MIN 0.603 (15.32) 0.420
More informationHigh Intensity Red Low Current Seven Segment Display
High Intensity Red Low Current 19237 DESCRIPTION This series defines a new standard for low current displays. It is a single digit 7-segment LED display utilizing AllnGaP technology in color red. The supreme
More informationCylindrical High-Intensity LED (5 mm)
(5 mm) OLLx8C7 Wide viewing angle High-brightness indicator Industry standard lead spacing Unique lens shape for flexible applications Product Photo Here The OLLx8C7 series is designed for superior performance
More informationDescription. Kingbright
2mm x 5mm BI-COLOR RECTANGULAR LED LAMP Part Number: L-117EGWT Features Uniform light output. Suitable for level indicator. Low power consumption. Long life - solid state reliability. RoHS compliant. Description
More informationHigh Intensity Red Low Current 7-Segment Display
High Intensity Red Low Current 7-Segment Display DESCRIPTION 19237 This series defines a new standard for low current displays. It is a single digit 7-segment LED display utilizing AllnGaP technology in
More informationFeatures. Descriptions. Applications. compliant version. This application. LCDD back light. Mobile phones. Illuminations. Switch lights.
Technical Dataa Sheet Features Sidee view LED. Leadd frame package with individual 2 pins. Wide viewing angle. Soldering methods: IR reflow soldering. Pb-free. The product itself will remain within RoHS
More informationYELLOW MAN5350/5360 RED MAN5750/5760 GREEN MAN5450/5460 HER MAN5950/5960
Part Identification Pin #1 1.49 (1.25mm) ±.4.2 (.5mm) ±.6.482 (12.25mm) Part No. XYY Z PPLICTIONS PCKGE DIMENSIONS For industrial and consumer applications such as: Digital readout displays Instrument
More informationEVERLIGHT ELECTRONICS CO., LTD.
Features P-LCC-3 package. High flux output. High current capability. Optical indicator. Colorless clear window. Ideal for backlight and light pipe application. Inter reflector. Suitable for automatic placement
More informationDescriptions. Kingbright
T-1(3mm) BI-COLOR INDICATOR LAMP Part Number: L-3VEYW Features Uniform light output. Low power consumption. 3 leads with one common lead. Long life - solid state reliability. RoHS compliant. Descriptions
More informationEVERLIGHT ELECTRONICS CO.,LTD.
Features Side view LED. Lead frame package with individual 2 pins. Wide viewing angle. Soldering methods: IR reflow soldering. Pb-free. The product itself will remain within RoHS compliant version. Descriptions
More informationDescription. Kingbright
T-1 3/4 (5mm) SOLID STATE LAMP Part Number: L-63GD Green Features Low profile. Low power consumption. Long life - solid state reliability. Reliable and rugged. RoHS compliant. Description The Green source
More informationDisplay Surface-mount ELSS-206SURWA/S530-A3/S290
Features Industrial standard size. Packaged in tape and reel for SMT manufacturing. The thickness is thinness than tradition display. Low power consumption. Categorized for luminous intensity. The product
More informationDescription. Kingbright
T-1 3/4 (5mm) BI-COLOR INDICATOR LAMP Part Number: L-59EGW Features Uniform light output. Low power consumption. 3 leads with one common lead. Long life-solid state reliability. High glass transition temperature
More informationDescription. Kingbright
T-1 (3mm) SOLID STATE LAMP Part Number: L-7104ID High Efficiency Red Features Low power consumption. Popular T-1 diameter package. General purpose leads. Reliable and rugged. Long life - solid state reliability.
More informationHigh-Intensity LED in Plastic T-1¾ Package
High-Intensity LED in Plastic T-1¾ Package OPT EK T e c h n o l o g y x x x x Narrow beam angle High brightness LED Water clear plastic package UV resistant epoxy Product Photo Here Each device in the
More informationHIGH VOLTAGE PHOTODARLINGTON OPTOCOUPLERS
DESCRIPTION The HGX series are photodarlington-type optically coupled optocouplers. These devices have a gallium arsenide infrared emitting diode coupled with a silicon darlington connected phototransistor
More informationSPEC NO: DSAB8533 REV NO: V.19A DATE: AUG/16/2014 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED:
T-1 3/4 (5mm) BI-COLOR INDICATOR LAMP Part Number: L-59SURKCGKW Features Uniform light output. Low power consumption. 3 leads with one common lead. Long life-solid state reliability. RoHS compliant. Descriptions
More informationHigh Intensity Red Low Current 7-Segment Display
TDSR5, TDSR6 High Intensity Red Low Current 7-Segment Display 9236 DESCRIPTION This series defines a new standard for low current displays. It is a single digit 7-segment LED display utilizing AllnGaP
More informationDescription. Kingbright
2x5mm RECTANGULAR LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: L-9763PBDT-A Blue Features Low power consumption. Reliable and rugged. Excellent
More informationDescription. Kingbright
T-1 (3mm) CYLINDRICAL LED LAMP Part Number: L-424YDT Yellow Features Cylindrical type. Low power consumption. Reliable and rugged. Long life - solid state reliability. Available on tape and reel. RoHS
More informationT-1 3/4 (5mm) FULL COLOR LED LAMP. Features. Descriptions. Package Dimensions
T-1 3/4 (5mm) FULL COLOR LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: WP154A4SEJ3VBDZGC/CA Features Uniform light output. Low power consumption.
More informationSPEC NO: DSAH3723 REV NO: V.5B DATE: AUG/19/2014 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED:
3x2.4mm SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AP23QBC/D/F-F01 Blue Features 3mmx2.4mm SMT LED, 1.05mm thickness. Low power
More informationSOT-23 SURFACE MOUNT LED LAMP. Features. Description. Package Dimensions. Part Number: KM-23LYD
SOT-23 SURFACE MOUNT LED LAMP Part Number: KM-23LYD Yellow Features SOT-23 package surface mount LED lamp. Low power consumption. Long life - solid state reliability. Package: 2000pcs / reel. Moisture
More informationFull Color Top View LED TFRJ-QTBHT5050CG-B2. Full Color Top View LED. Features. Descriptions. Applications. Device Selection Guide
Full Color Top View LED Features Super-luminosity chip LED. White SMT package. Built in red, green and blue chips Lead frame package with individual 6 pins. Wide viewing angle Soldering methods: IR reflow
More informationTechnical Data Sheet 0.39" Dual Digit SMD Displays
Features Packaged in tape and reel for SMT manufacturing. Design flexibility (common cathode or anode). Categorized for luminous intensity. The thickness is thinness than tradition display. Pb free. The
More information2.1x0.6mm RIGHT ANGLE SURFACE LED LAMP PRELIMINARY SPEC. Descriptions. Features. Package Dimensions
2.1x0.6mm RIGHT ANGLE SURFACE LED LAMP PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APA2107LZGCK Green Features 2.1mmX0.6mm right angle
More informationDisplay Through-hole ELS-2326SURWA/S530-A3
Features Industrial standard size. Low power consumption. Categorized for luminous intensity. Pb free and RoHS compliant. Description The is a 57.0mm (2.24) digit height seven-segment display. The display
More informationLuckylight. 0.54" Dual Digit Alphanumeric Displays. Technical Data Sheet. Model No: KWA-541XWB-Y
.54" Dual Digit Alphanumeric Displays Technical Data Sheet Model No: KWA-54XWB-Y Spec No.: C5243A/B Rev No.: V.2 Date:Apr//26 Page: O 6 eatures:.54 (inch) digit height. Excellent segment uniformity. Sold
More information7.6mmX7.6mm SUPER FLUX LED LAMP. Features. Descriptions. Package Dimensions
7.6mmX7.6mm SUPER FLUX LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: L-7676CZGC-G Green Features Super flux output. Design for high current
More informationLED Display Product Data Sheet LTP-2C44F-01 Spec No.: DS Effective Date: 10/27/2000 LITE-ON DCC RELEASE
LED Display Product Data Sheet LTP-2C44F-01 Spec No.: DS-30-97-133 Effective Date: 10/27/2000 Revision: - LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road,
More informationLTH5MM12V Series 5mm (T-1 3/4) Through Hole LED Built in Resistor for 12VDC
TM LTH5MM12V Series 5mm (T-1 3/4) Through Hole Built in Resistor for 12VDC LTH5MM12VFR44 - White Water-Clear T-1 3/4 (5 mm) HIGH BRIGHTNESS COLOR OPTIONS VIEWING ANGLE 16 / 2 12 Volt Applications Automotive
More informationSMD Power Top View LED EAPL3527WA7
PRELIMINARY Features P-LCC-3 package. High flux output. High current capability. White package. Optical indicator. Colorless clear window. Ideal for backlight and light pipe application. Inter reflector.
More informationHigh Intensity Red Low Current 7-Segment Display
TDSR50, TDSR60 High Intensity Red Low Current 7-Segment Display 19236 DESCRIPTION This series defines a new standard for low current displays. It is a single digit 7-segment LED display utilizing AllnGaP
More informationHigh Intensity Red Low Current Seven Segment Display
High Intensity Red Low Current Seven Segment Display DESCRIPTION 19237 This series defines a new standard for low current displays. It is a single digit 7-segment LED display utilizing AllnGaP technology
More informationTechnical Data Sheet. Top View LEDs with Lens 67-21B/BHC-XS1T2M/BT
Features PLCC-2 package. High flux output. High current capability. White package. Optical indicator. Colorless clear window. Ideal for backlight and light pipe application. Inter reflector. Suitable for
More informationLuckylight. 10 Segment Light Bars Displays. Technical Data Sheet. Part No.: KWL-R1025BB
Segment Light Bars Displays Technical Data Sheet Part No.: KWL-R25BB Spec No.: W25A Rev No.: V.2 Date:Dec/22/211 Page: 1 OF 6 Features: Industrial standard size. Low power consumption. Categorized for
More informationDisplay Through-hole ELB-1001SDRWB/S530-A3
Features Industrial standard size. Low power consumption. Categorized for luminous intensity. Pb free and RoHS compliant. Description The is a pattern display designed for viewing distances up to 7 meters.
More informationType V U D Y M. (unit : mm) Typ. I F Max. V R Min.* 2 Typ. Max.* 2 I F Min. Typ. Max. I F SML-D15VW SML-D15UW
Datasheet Features Outline Original device technology enables high brightness and high reliability Single Rank products Size 16 168 (42) (63) 1..6mm 1.6.8mm (t=.2mm) (t=.55mm) Color Type V U U2 D Y M Dimensions
More informationTechnical Data Sheet Side View LED
Features Fluorescence Type High Luminous Intensity High Efficiency Pb-free The product itself will remain within RoHS compliant version. Descriptions The 57-21series is available in soft orange, green,
More informationRound Through-Hole LED Lamp (3 mm)
Round Through-Hole LED Lamp (3 mm) OLBx4C7 Series High brightness with well-defined spatial radiation patterns U-resistant epoxy lens Choice of blue, green, red or yellow No stand-offs Each OLBx4C7 series
More informationTechnical Data Sheet 1206 Package Chip LED
Lead (Pb) Free Product - RoHS Compliant Feature RoHS compliant. Chip LED package. Colorless clear resin Wide viewing angle 130 o. Brightness: 71 to180 mcd at 20 ma. Qualification according to AEC-Q101.
More informationSMD TOP View LEDs EAPL3527RA2
PRELIMINARY Features P-LCC-2 package. White package. Optical indicator. Colorless clear window. Wide viewing angle. Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. Computable
More informationTDCG1050M, TDCG1060M, TDCR1050M, TDCR1060M Clock Display
,,, Clock Display DESCRIPTION 16770 Four digit display, with 10 mm digit charactersize. Designed as clock display with active colon between digit two and three. FEATURES High efficient AlInGAP technology
More informationMOC215-M MOC216-M MOC217-M
DESCRIPTION These devices consist of a gallium arsenide infrared emitting diode optically coupled to a monolithic silicon phototransistor detector, in a surface mountable, small outline, plastic package.
More informationSPEC NO: DSAF1339 REV NO: V.9B DATE: NOV/10/2015 PAGE: 1 OF 6 APPROVED:
3.2x2.4mm SMD CHIP LED LAMP Part Number: APBD3224SYKCGKC-F01 Features 3.2x2.4mm SMD LED, 2.4mm thickness. Low power consumption. Ideal for backlight and indicator. Package : 1500pcs / reel. Moisture sensitivity
More informationAPTF1616SEEZGQBDC. 1.6 x 1.6 mm Full-Color Surface Mount LED DESCRIPTIONS PACKAGE DIMENSIONS FEATURES APPLICATIONS ATTENTION SELECTION GUIDE
1.6 x 1.6 mm Full-Color Surface Mount LED DESCRIPTIONS The source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode The source color devices are made with InGaN on Sapphire Light
More informationDescription. Kingbright
1.6X0.8mm SMD CHIP LED LAMP Part Number: Green Features 1.6mmX0.8mm SMT LED, 1.1mm thickness. Low power consumption. Wide viewing angle. Ideal for backlight and indicator. Package: 2000pcs / reel. Moisture
More informationSPEC NO: DSAF1341 REV NO: V.7B DATE: AUG/20/2014 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED:
2.0x1.25mm SMD CHIP LED LAMP Part Number: APHCM2012CGCK-F01 Green Features 2.0X1.25mm SMT LED,0.5mm max. thickness. Low power consumption. Wide viewing angle. Ideal for backlight and indicator. Package
More informationPart No. Emitting Color Polarity. KW1-S281AAA Orange Common Anode. KW1-S281CAA Orange Common Cathode
Features.28inch (7.mm) digit height. The thickness is thinness than tradition display. Packaged in tape and reel for SMT manufacturing. Low current operation. Excellent characters appearance. Categorized
More informationSLC800-STR. Description. Features. Agency Approvals. Applications. Absolute Maximum Ratings. Schematic Diagram. Ordering Information
Description The SLC800 is a highly advanced linear optocoupler device. The product takes advantage of highly matched transistors used for both a Servo Feedback Loop and a Forward Output Loop. The closely
More informationSUBMINIATURE SOLID STATE LAMP. Features. Description. Package Dimensions
SUBMINIATURE SOLID STATE LAMP Part Number: AM2520EC03 High Efficiency Red Features Subminiature package. Gull wing lead. Long life - solid state reliability. Low package profile. Moisture sensitivity level
More informationSLC810-STR. Features. Description. Agency Approvals. Applications. Absolute Maximum Ratings. Schematic Diagram. Ordering Information
Description The SLC810 is a highly advanced linear optocoupler device. The product takes advantage of tightly matched transistors used for both a Servo Feedback Loop and a Forward Output Loop. The closely
More informationSPEC NO: DSAN1915 REV NO: V.1A DATE: AUG/30/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED:
T-1 (3mm) SOLID STATE LAMP Part Number: L-1154SRC-J4 Super Bright Red Features Low power consumption. Popular T-1 diameter package. General purpose leads. Reliable and rugged. Long life - solid state reliability.
More informationSingle Digit LED Numeric Display
Single Digit LED Numeric Display LA-301 B / L series is developed because of the demand for small single digit LED Numeric Display. Materials of emission are GaAsP on GaP, AlGalnP and GaP. This is the
More information2.5x0.7mm RIGHT ANGLE SMD CHIP LED LAMP. Features. Descriptions. Package Dimensions
2.5x0.7mm RIGHT ANGLE SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APFA2507LSURKSYKZGKC Features 2.5x1.0x0.7mm right angle SMD LED,
More informationBicolor Symbol LED in 2.5 mm x 5 mm Untinted Top-Diffused Package
Bicolor Symbol LED in 2.5 mm x 5 mm Untinted Top-Diffused Package TLSV5 96496 PRODUCT GROUP AND PACKAGE DATA Product group: LED Package: 2.5 mm x 5 mm symbol Product series: bicolor Angle of half intensity:
More informationSPEC NO: DSAN4362 REV NO: V.1A DATE: JAN/10/2014 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED:
1.6X0.8mm SMD CHIP LED LAMP Part Number: Hyper Red Features 1.6mmX0.8mm SMT LED, 1.06mm thickness. Low power consumption. Wide viewing angle. Ideal for backlight and indicator. Various colors and lens
More informationHigh Intensity LED in Ø 3 mm Tinted Diffused Package
High Intensity LED in Ø 3 mm Tinted Diffused Package DESCRIPTION 19222 This device has been designed to meet the increasing demand for AlInGaP technology. It is housed in a 3 mm diffused plastic package.
More informationFeatures. Application. Camera 0.15
ASMT-FJ6-AFJ Surface Mount AFA LED Data Sheet Description Avago Technologies ASMT-FJ6-AFJ is a SMT dome lamp that uses an untinted, non diffused lens to provide a high luminous intensity within a narrow
More information1.9x3.9mm RECTANGULAR SOLID LAMP. Features. Description. Package Dimensions. Part Number: WP144GDT
1.9x3.9mm RECTANGULAR SOLID LAMP Part Number: WP144GDT Green Features Low power consumption. Reliable and rugged. Excellent uniformity of light output. Suitable for level indicator. Long life - solid state
More informationCTL0603FGR1T DATASHEET
Part Number Size Emitting Color CTL0603FGR1T 0603 Green (Yellow Green) Emitting Material Lens-Color Luminous Intensity (I f mcd Wavelength nm λp Vewing Angle (2q 1/2) AlGaInP Water Clear 20 min 40 typ
More informationTOYO LED ELECTRONICS LIMITED Room 1610, Hong Kong Plaza, 188 Connaught Road West, Hong Kong. Tel : (852)
PACKAGE DIMENSION INTERNAL CIRCUIT DIAGRAM NOTES: 1. All dimensions are in millimeter(inch); 2. Tolerance is ±0.25mm(0.01 ) especially other specified; 3. Pin length, housing color, marking no & circuit
More informationSDD600-STR. Description. Features. Agency Approvals. Applications. Absolute Maximum Ratings. Schematic Diagram. Ordering Information
Description The consists of a high voltage photo-darlington transistor optically coupled to a light emitting diode. Optical coupling between the input IR LED and output photo- Darlington allows for high
More informationSingle Digit LED Numeric Display
Single Digit LED Numeric Display LA-30 B / L Series LA-30 B / L series is developed because of the demand for small single digit LED Numeric Display. Materials of emission are GaAsP on GaP, AlGalnP and
More informationHL-PST-1608U70GC 2.60 [0.10] 0.60 [0.02] 1.10 [0.04] Description. Recommended Soldering Pattern. Package Dimensions. Applications 0.80 [0.
0.18 [0.01] 0.68 [0.03] 1.10 [0.04] 0.80 [0.03] Features Extremely wide viewing angle Suitable for all SMT assembly and solder process Available on tape and reel Moisture sensitivity level: Level 4 Package:4000pcs/reel
More informationDisplay Through-hole ELF-511SURWA/S530-A3
Features Industrial standard size. Low power consumption. Categorized for luminous intensity. Pb free and RoHS compliant. Description The ELF-512SURWA/S530-A3 is a 14.22mm (0.56") digit height seven-segment
More informationDisplay Surface-mount EADSS050GA2
Features Industrial standard size. Packaged in tape and reel for SMT manufacturing. The thickness is thinness than tradition display. Low power consumption. Categorized for luminous intensity. Pb free
More informationDescription. Kingbright
T-1 3/4 (5mm) SOLID STATE LAMP Part Number: L-7113LYD Yellow Features Description Low power consumption. Popular T-1 3/4 diameter package. General purpose leads. Reliable and rugged. Long life - solid
More informationLow Current 0603 SMD LED
TLMO, TLMS, TLMY Low Current 63 SMD LED DESCRIPTION 8562 The new 63 LED series have been designed in the smallest SMD package. This innovative 63 LED technology opens the way to Smaller products of higher
More informationSPEC NO: DSAA3955 REV NO: V.12A DATE: AUG/11/2014 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED:
7.6mmX7.6mm SUPER FLUX LED LAMP Part Number: L-7676CSURC-E Hyper Red Features Super flux output. Design for high current operation. Outstanding material efficiency. Reliable and rugged. RoHS compliant.
More informationEAST1608RGA0 SMD B.
eatures Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. The product itself
More informationTELUX LED FEATURES APPLICATIONS. WAVELENGTH (nm)
TELUX LED DESCRIPTION 19232 The TELUX series is a clear, non diffused LED for applications where supreme luminous flux is required. It is designed in an industry standard 7.62 mm square package utilizing
More information