SGM4863 Dual 2.1W Audio Power Amplifier Plus Stereo Headphone Function

Size: px
Start display at page:

Download "SGM4863 Dual 2.1W Audio Power Amplifier Plus Stereo Headphone Function"

Transcription

1 Dual.W Audio Power Amplifier GENERAL DESCRIPTION The SGM4863 is a dual bridge-connected audio power amplifier which, when connected to a 5V supply, will deliver.w into a 4Ω load or.5w into a 3Ω load with typically % THD+N. In addition, the headphone input pin allows the amplifiers to operate in single-ended mode when driving stereo headphones. To simplify audio system design, the SGM4863 combines dual bridge speaker amplifiers and stereo headphone amplifiers on one chip. The SGM4863 features a low power consumption shutdown mode and thermal shutdown protection. It also utilizes circuitry to reduce pop/click during device turn-on. The SGM4863 is available in Green TSSOP- (Exposed Pad), TQFN-3 3-L, TSSOP-6 (Exposed Pad), SOIC-6 and DIP-6 packages. It operates over an ambient temperature range of -4 to +85. FEATURES.5W into 3Ω Load from 5V Power Supply at THD+N = % (Typical, per Channel).W into 4Ω Load from 5V Power Supply at THD+N = % (Typical, per Channel).3W into 8Ω Load from 5V Power Supply at THD+N = % (Typical, per Channel) Low Shutdown Current:.3μA Operation Supply Voltage:.8V to 5.5V Stereo Headphone Amplifier Mode Pop/Click Suppression Circuitry Unity-Gain Stable Thermal Shutdown Protection Circuitry -4 to +85 Operating Temperature Range Available in Green TSSOP- (Exposed Pad), TQFN-3 3-L, TSSOP-6 (Exposed Pad), SOIC-6 and DIP-6 Packages APPLICATIONS Multimedia Monitors Portable and Desktop Computers Portable Televisions REV. B. 3

2 PACKAGE/ORDERING INFORMATION Dual.W Audio Power Amplifier MODEL ORDER NUMBER PACKAGE DESCRIPTION PACKAGE OPTION MARKING INFORMATION SGM4863 SGM4863YPTSG/TR TSSOP- (Exposed Pad) Tape and Reel, 3 SGM4863YPTS SGM4863YTQGG/TR TQFN-3 3-L Tape and Reel, 3 SGM4863QG SGM4863YPTS6/TR TSSOP-6 (Exposed Pad) Tape and Reel, 3 SGM4863YPTS6 SGM4863YS6/TR SOIC-6 Tape and Reel, 5 SGM4863YS6 SGM4863YP6 DIP-6 Tube (5pcs) SGM4863YP6 Green (RoHS & HSF): defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If you have additional comments or questions, please contact your SGMICRO representative directly. ABSOLUTE MAXIMUM RATINGS Supply Voltage...6V Input Voltage..-.3V to () +.3V Storage Temperature Range -65 to +5 Junction Temperature..5 Operating Temperature Range...-4 to +85 Lead Temperature Range (Soldering sec). 6 ESD Susceptibility HBM...4V MM 4V NOTE: Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. CAUTION This integrated circuit can be damaged by ESD if you don t pay attention to ESD protection. SGMICRO recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. SGMICRO reserves the right to make any change in circuit design, specification or other related things if necessary without notice at any time. Please contact SGMICRO sales office to get the latest datasheet.

3 Dual.W Audio Power Amplifier PIN CONFIGURATIONS (TOP VIEW) SHUTDOWN HP-IN SHUTDOWN HP-IN OUTA -OUTA -INA OUTB -OUTB -INB +OUTA -OUTA OUTB -OUTB +INA 7 4 BYPASS 8 3 +INB 9 -INA INB BYPASS TSSOP- (Exposed Pad) +INA TQFN-3 3-L +INB SHUTDOWN 6 HP-IN SHUTDOWN 6 HP-IN 5 5 +OUTA 3 4 +OUTB +OUTA 3 4 +OUTB -OUTA -INA OUTB -INB -OUTA -INA OUTB -INB 7 BYPASS 7 BYPASS +INA 8 9 +INB +INA 8 9 +INB TSSOP-6 (Exposed Pad) SOIC-6/DIP-6 LOGIC LEVEL TRUTH TABLE SHUTDOWN HP-IN PIN OPERATIONAL MODE Low Logic Low Bridged Amplifiers Low Logic High Amplifiers High Logic Low Micro-Power Shutdown High Logic High Micro-Power Shutdown 3

4 ELECTRICAL CHARACTERISTICS (The following specifications apply for = 5V, limits apply for T A = +5 C, unless otherwise noted.) Dual.W Audio Power Amplifier PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS Supply Voltage V V IN = V, I O = A (), BTL mode 5.7 Quiescent Power Supply Current I Q ma V IN = V, I O = A (), SE mode 3. 5 Shutdown Current I SD applied to the SHUTDOWN pin.3 μa Headphone Sense High Input Voltage V IH Hold High for SE mode 4 V Headphone Sense Low Input Voltage V IL Hold Low for BTL mode 3. V Shutdown Voltage Input High V SDIH.6 V Shutdown Voltage Input Low V SDIL.5 V Turn-On Time T ON C BYPASS = μf 48 ms ELECTRICAL CHARACTERISTICS FOR BRIDGED-MODE OPERATION (The following specifications apply for = 5V, limits apply for T A = +5 C, unless otherwise noted.) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS Output Offset Voltage V OS V IN = V 9 3 mv Output Power () P O THD+N = %, f = khz THD+N = %, f = khz R L = 3Ω.5 R L = 4Ω. R L = 8Ω.3 R L = 3Ω 3. R L = 4Ω.6 R L = 8Ω.6 W Total Harmonic Distortion + Noise THD+N f = khz, R L = 4Ω, P O = W.4 A VD = R L = 8Ω, P O = W.3 % Power Supply Rejection Ratio PSRR V RIPPLE = mv RMS, f = khz -7 db R L = 8Ω, C BYPASS =.µf f = 7Hz -73 Crosstalk X TALK f = khz, C BYPASS =.µf -86 db Signal to Noise Ratio SNR = 5V, P O =.W, R L = 8Ω, BW < 8kHz -99 db 4

5 Dual.W Audio Power Amplifier ELECTRICAL CHARACTERISTICS FOR SINGLE-MODE OPERATION (The following specifications apply for = 5V, limits apply for T A = +5 C, unless otherwise noted.) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS Output Offset Voltage V OS V IN = V 5 3 mv THD+N = %, f = khz, R L = 8Ω 34 THD+N = %, f = khz, R L = 8Ω 44 Output Power P O THD+N = %, f = khz, R L = 6Ω 9 THD+N = %, f = khz, R L = 6Ω 3 mw THD+N = %, f = khz, R L = 3Ω 9 Total Harmonic Distortion + Noise Power Supply Rejection Ratio THD+N PSRR THD+N = %, f = khz, R L = 3Ω A V = -, P O = 75mW, Hz f khz, R L = 3Ω V RIPPLE = mv RMS, C BYPASS =.µf f = khz -78 f = 7Hz -74. % db Crosstalk X TALK f = khz, C BYPASS =.µf -8 db Signal to Noise Ratio SNR P O = 34mW, R L = 8Ω, BW < 8kHz - db NOTES:. The quiescent power supply current depends on the offset voltage when a practical load is connected to the amplifier.. When driving 3Ω or 4Ω loads, the SGM4863 must be mounted to a circuit board that has a minimum of.5in of exposed, uninterrupted copper area connected to the package s exposed DAP. 5

6 TYPICAL APPLICATION Dual.W Audio Power Amplifier R F kω L H C S + μf TANT kω AUDIO INPUT C I.39μF R I kω -INA +INA _ Amp A + SHUTDOWN -OUT A C O μf + kω C BYPASS μf + BYPASS _ Amp A + + Amp B _ +OUT A HP-IN +OUT B R L 8Ω kω R L 8Ω kω CONTROL PIN RING TIP HEADPHONE JACK SLEEVE AUDIO INPUT C I R I.39μF kω +INB -INB + Amp B _ -OUT B + C O μf kω R F kω NOTES:. It is necessary to connect the schottky barrier diode with the power supply to prevent IC destruction during power supply surge.. A kω resistor must be serially connected to SHUTDOWN pin. EXTERNAL COMPONENTS DESCRIPTION COMPONENTS R I C I R F C S C BYPASS FUNCTIONAL DESCRIPTION The inverting input resistance, along with R F, set the closed-loop gain. R I, along with C I, form a high pass filter with f C = /(πr I C I ). The input coupling capacitor blocks DC voltage at the amplifier s input terminals. C I, along with R I, create a highpass filter with f C = /(πr IC I). The feedback resistance, along with R I, set the closed-loop gain. The supply bypass capacitor. The capacitor, C BYPASS, filters the half-supply voltage present on the BYPASS pin. 6

7 Dual.W Audio Power Amplifier SGM4863 TYPICAL PERFORMANCE CHARACTERISTICS.. f = khz THD+N vs. Output Power f = khz = 5V, R L = 3Ω, A V = -, BW < 8kHz,. f = Hz.... THD+N vs. Output Power = 5V, R L = 6Ω, A V = -, BW < 8kHz, f = Hz f = khz f = khz... THD+N vs. Output Power = 5V, R L = 8Ω, A V =, BW < 8kHz, Bridged THD+N vs. Output Power = 5V, R L = 4Ω BW < 8kHz.. f = khz f = khz f = Hz.. f = khz f = khz f = Hz THD+N vs. Output Power = 5V, R L = 3Ω BW < 8kHz f = khz f = khz f = Hz.. THD+N vs. Output Power = 3.3V, R L = 8Ω A V = f = khz f = khz f = Hz

8 Dual.W Audio Power Amplifier SGM4863 TYPICAL PERFORMANCE CHARACTERISTICS = 3.3V, R L = 4Ω A V = THD+N vs. Output Power THD+N vs. Frequency A V = - f = khz. f = khz f = Hz A V = -5 A V = - = 5V, R L = 3Ω P O = 75mW, No filters..... THD+N vs. Frequency A V = -5 A V = - A V = - = 5V, R L = 6Ω P O = 5mW, No filters..... THD+N vs. Frequency A V = A V = A V = = 5V, R L = 8Ω P O = W, No filters Bridged Load.. THD+N vs. Frequency = 5V, R L = 4Ω, P O = W A V =, No filters THD+N vs. Frequency = 5V, R L = 3Ω, P O =.W A V =, No filters

9 Dual.W Audio Power Amplifier SGM4863 TYPICAL PERFORMANCE CHARACTERISTICS THD+N vs. Frequency THD+N vs. Frequency = 3.3V, R L = 8Ω, P O = 45mW A V =, No filters = 3.3V, R L = 4Ω, P O = 75mW A V =, No filters PSRR (db) Power Supply Rejection Ratio vs. Frequency = 5V R L = 3Ω mvrms PSRR (db) Power Supply Rejection Ratio vs. Frequency = 5V R L = 8Ω mvrms Bridged Load Crosstalk vs. Frequency Crosstalk vs. Frequency -6-7 = 5V, R L = 8Ω, P O = W, Bridged Load -6-7 = 5V, R L = 3Ω, P O = 75mW, Level (db) Level (db)

10 Dual.W Audio Power Amplifier SGM4863 TYPICAL PERFORMANCE CHARACTERISTICS. Power Dissipation vs. Output Power Power Dissipation vs. Output Power Power Dissipation (W) R L = 3Ω R L = 6Ω = 5V, f = khz THD+N % BW < 8kHz Single Channel Power Dissipation (W) R L = 8Ω R L = 4Ω R L = 3Ω = 5V, f = khz Bridged Load THD+N % BW < 8kHz Single Channel Output Power vs. Supply Voltage R L = 3Ω f = khz BW < 8kHz THD+N = % THD+N = % Output Power vs. Supply Voltage R L = 6Ω f = khz BW < 8kHz THD+N = % THD+N = % Supply Voltage (V) Supply Voltage (V) Output Power vs. Supply Voltage R L = 8Ω f = khz BW < 8kHz Bridged Load THD+N = % THD+N = % Output Power vs. Supply Voltage R L = 4Ω f = khz BW < 8kHz Bridged Load THD+N = % THD+N = % Supply Voltage (V) Supply Voltage (V)

11 Dual.W Audio Power Amplifier SGM4863 TYPICAL PERFORMANCE CHARACTERISTICS Output Power vs. Supply Voltage R L = 3Ω f = khz BW < 8kHz Bridged Load THD+N = % THD+N = % Supply Current (ma) V IN = V No Load Supply Current vs. Supply Voltage HP - IN =, Bridged Load HP - IN =, Supply Voltage (V) Supply Voltage (V) Output Power (w) Output Power vs. Load Resistance THD+N = % THD+N = % = 5V, f = khz A V =, BW < 8kHz, Bridged Load Load Resistance (Ω) Output Power (w) Output Power vs. Load Resistance THD+N = % = 5V, f = khz A V = -, BW < 8kHz,. THD+N = % Load Resistance (Ω)

12 PACKAGE OUTLINE DIMENSIONS Dual.W Audio Power Amplifier TSSOP- (Exposed Pad) D D 4. E E E b e.78.5 MIN.4.65 RECOMMENDED LAND PATTERN (Unit: mm) L A A A θ H c Symbol In Millimeters In Inches MIN MAX MIN MAX A..43 A A b c D D E E E e.65 BSC.6 BSC L H.5 TYP. TYP θ 7 7

13 PACKAGE OUTLINE DIMENSIONS Dual.W Audio Power Amplifier TQFN-3 3-L D e L D E E N k b N TOP VIEW BOTTOM VIEW.5.7 A A SIDE VIEW A.4. RECOMMENDED LAND PATTERN (Unit: mm) In Millimeters In Inches Symbol MIN MAX MIN MAX A A..5.. A.3 REF.8 REF D D E E k. MIN.8 MIN b e.4 TYP.6 TYP L

14 PACKAGE OUTLINE DIMENSIONS Dual.W Audio Power Amplifier TSSOP-6 (Exposed Pad) D D 3. E E E e b.4.65 RECOMMENDED LAND PATTERN (Unit: mm) L A A A θ H c In Millimeters In Inches Symbol MIN MAX MIN MAX A..43 A A b c D D E E E e.65 BSC.6 BSC L H.5 TYP. TYP θ 7 7 4

15 PACKAGE OUTLINE DIMENSIONS Dual.W Audio Power Amplifier SOIC-6 D e.75 E E RECOMMENDED LAND PATTERN (Unit: mm) L A b A A θ c In Millimeters In Inches Symbol MIN MAX MIN MAX A A A b c D E E e.7 BSC.5 BSC L θ 8 8 5

16 PACKAGE OUTLINE DIMENSIONS Dual.W Audio Power Amplifier DIP-6 E A e A L A b b E c D E In Millimeters In Inches Symbol MIN MAX MIN MAX A A.5. A b b.54 BSC.6 BSC c D E E e.54 BSC. BSC L E

17 TAPE AND REEL INFORMATION Dual.W Audio Power Amplifier REEL DIMENSIONS TAPE DIMENSIONS P P W Q Q Q Q Q Q B Q3 Q4 Q3 Q4 Q3 Q4 Reel Diameter P A K Reel Width (W) DIRECTION OF FEED NOTE: The picture is only for reference. Please make the object as the standard. KEY PARAMETER LIST OF TAPE AND REEL Package Type TSSOP- (Exposed Pad) Reel Diameter Reel Width W A B K P P P W Pin Quadrant Q SOIC Q TSSOP-6 (Exposed Pad) Q TQFN-3 3-L Q 7

18 CARTON BOX DIMENSIONS Dual.W Audio Power Amplifier NOTE: The picture is only for reference. Please make the object as the standard. KEY PARAMETER LIST OF CARTON BOX Reel Type Length Width Height Pizza/Carton

SGM mW Differential Input, Stereo Audio Power Amplifier

SGM mW Differential Input, Stereo Audio Power Amplifier SGM482 2mW Differential Input, GENERAL DESCRIPTION The SGM482 is a stereo audio power amplifier with differential inputs. Operating on a single 5V power supply, it delivers 2mW of continuous RMS power

More information

SGM W Audio Power Amplifier

SGM W Audio Power Amplifier GENERAL DESCRIPTION The SGM489 is a.2w, fully integrated, audio power amplifier. It is designed to maximize audio performance in portable applications such as mobile phone. The portable application requires

More information

SGM W Fully Differential Audio Power Amplifier with Selectable Shutdown

SGM W Fully Differential Audio Power Amplifier with Selectable Shutdown GENERAL DESCRIPTION The SGM4996 is a fully differential audio power amplifier that is designed for portable communication device applications and demanding applications in mobile phones. It is capable

More information

SGM W Fully Differential Audio Power Amplifier

SGM W Fully Differential Audio Power Amplifier .3W Fully Differential GENERAL DESCRIPTION The SGM4895 is a fully differential audio power amplifier that is designed for portable communication device applications and demanding applications in mobile

More information

SGM4809 Dual 158mW Headphone Amplifier with Active Low Shutdown Mode

SGM4809 Dual 158mW Headphone Amplifier with Active Low Shutdown Mode Dual 58mW Headphone Amplifier GENERAL DESCRIPTION The SGM4809 is a dual audio power amplifier capable of delivering 58mW per channel of continuous average power with less than 0.% distortion(thd N)when

More information

SGM W Audio Power Amplifier with Shutdown Mode

SGM W Audio Power Amplifier with Shutdown Mode SGM487 GENERAL DESCRIPTION The SGM487 is a mono bridged audio power amplifier that is designed for portable communication device applications and demanding applications in mobile phones. SGM487YPS8 is

More information

SGM W Mono Fully Differential Audio Power Amplifier

SGM W Mono Fully Differential Audio Power Amplifier .3W Mono Fully Differential GENERAL DESCRIPTION The SGM4995 is a fully differential audio power amplifier that is designed for portable communication device applications and demanding applications in mobile

More information

UNISONIC TECHNOLOGIES CO., LTD

UNISONIC TECHNOLOGIES CO., LTD UNISONIC TECHNOLOGIES CO., LTD DUAL 2.2W AUDIO AMPLIFIER PLUS STEREO HEADPHONE FUNCTION DESCRIPTION The UTC L4863 is a dual bridge-connected audio power amplifier. It combines dual bridge speaker amplifiers

More information

SGM mW, Capless, Stereo Headphone Amplifier with Shutdown

SGM mW, Capless, Stereo Headphone Amplifier with Shutdown 8mW, Capless, Stereo Headphone GENERAL DESCRIPTION The SGM497 stereo headphone amplifier is designed for portable equipment where board space is at a premium. The SGM497 uses capless architecture to produce

More information

SGM321/SGM358/SGM324 1MHz, 60μA, Rail-to-Rail I/O CMOS Operational Amplifiers

SGM321/SGM358/SGM324 1MHz, 60μA, Rail-to-Rail I/O CMOS Operational Amplifiers /SGM358/SGM324 1MHz, 60μA, Rail-to-Rail I/O CMOS Operational Amplifiers GENERAL DESCRIPTION The (single), SGM358 (dual) and SGM324 (quad) are low cost, rail-to-rail input and output voltage feedback amplifiers.

More information

SGM8621/2/3/4 3MHz, Rail-to-Rail I/O CMOS Operational Amplifiers

SGM8621/2/3/4 3MHz, Rail-to-Rail I/O CMOS Operational Amplifiers SGM8621/2/3/4 3MHz, Rail-to-Rail I/O PRODUCT DESCRIPTION The SGM8621 (single), SGM8622 (dual), SGM8623 (single with shutdown) and SGM8624 (quad) are low noise, low voltage, and low power operational amplifiers,

More information

SGM8271/2/4 High Voltage Rail-to-Rail Output Operational Amplifiers

SGM8271/2/4 High Voltage Rail-to-Rail Output Operational Amplifiers GENERAL DESCRIPTION The SGM8271 (single), SGM8272 (dual) and SGM8274 (quad) are high voltage operational amplifiers that are designed to offer a wide input common mode voltage range and output voltage

More information

SGM mW, Capless, Stereo Headphone Amplifier with Shutdown

SGM mW, Capless, Stereo Headphone Amplifier with Shutdown GENERAL DESCRIPTION The SGM4914 stereo headphone amplifier is designed for portable equipment where board space is at a premium. The SGM4914 uses capless architecture to produce a ground-referenced output

More information

SGM8521/2/4 150kHz, 5.5μA, Rail-to-Rail I/O, CMOS Operational Amplifiers

SGM8521/2/4 150kHz, 5.5μA, Rail-to-Rail I/O, CMOS Operational Amplifiers //4 0kHz,.μA, Rail-to-Rail I/O, GENERAL DESCRIPTION The (single), SGM8 (dual) and SGM84 (quad) are low cost, rail-to-rail input and output voltage feedback amplifiers. They have a wide input common mode

More information

SGM8631/2/3 6MHz, Rail-to-Rail I/O CMOS Operational Amplifiers

SGM8631/2/3 6MHz, Rail-to-Rail I/O CMOS Operational Amplifiers /2/3 6MHz, Rail-to-Rail I/O PRODUCT DESCRIPTION The (single), SGM8632 (dual) and SGM8633 (single with shutdown) are low noise, low voltage, and low power operational amplifiers that can be designed into

More information

SGM89000 Capless 2Vrms Line Driver with Adjustable Gain

SGM89000 Capless 2Vrms Line Driver with Adjustable Gain GENERAL DESCRIPTION The SGM89000 is a 2Vrms pop/click-free stereo line driver designed to allow the removal of the output DC-blocking capacitors for reduced component count and cost. The device is ideal

More information

SGM8631/2/3/4 470μA, 6MHz, Rail-to-Rail I/O CMOS Operational Amplifiers

SGM8631/2/3/4 470μA, 6MHz, Rail-to-Rail I/O CMOS Operational Amplifiers PRODUCT DESCRIPTION The SGM863 (single), SGM863 (dual), SGM8633 (single with shutdown) and SGM8634 (quad) are low noise, low voltage, and low power operational amplifiers, that can be designed into a wide

More information

SGM8908 Capless 3Vrms Line Driver with Adjustable Gain

SGM8908 Capless 3Vrms Line Driver with Adjustable Gain GENERAL DESCRIPTION The is a 3Vrms pop/click-free stereo line driver designed to allow the removal of the output DC-blocking capacitors for reduced component count and cost. The device is ideal for single

More information

SGM8705 Micro-Power, CMOS Input, RRIO, 1.4V, Push-Pull Output Comparator

SGM8705 Micro-Power, CMOS Input, RRIO, 1.4V, Push-Pull Output Comparator SGM87 Micro-Power, CMOS Input, RRIO, 1.4V, GENERAL DESCRIPTION The SGM87 is a dual low power comparator with a typical power supply current of 3nA (per channel). It has the best-in-class power supply current

More information

SGM3798 Audio Headset Analog Switch with Reduced GND Switch R ON and FM Capability

SGM3798 Audio Headset Analog Switch with Reduced GND Switch R ON and FM Capability GENERAL DESCRIPTION The is an audio headset analog switch that is used to detect 3.5mm accessories and switch SLEEVE and RING2 by external controller. The ground signal is routed through a pair of low-impedance

More information

Dual 2.2W Audio Power Amplifier Plus Stereo

Dual 2.2W Audio Power Amplifier Plus Stereo HWD4863 Dual 2.2W Audio Power Amplifier Plus Stereo Headphone Function General Description --- HWD4863 is a dual bridge-connected audio power amplifier which, when connected to a 5V supply, will deliver

More information

SGM8554 Single-Supply, Quad Rail-to-Rail I/O Precision Operational Amplifier

SGM8554 Single-Supply, Quad Rail-to-Rail I/O Precision Operational Amplifier PRODUCT DESCRIPTION The SGM8554 is a quad rail-to-rail input and output precision operational amplifier which has low input offset voltage, and bias current. It is guaranteed to operate from 2.5V to 5.5V

More information

SGM8584 Single-Supply, Quad Rail-to-Rail I/O Precision Operational Amplifier

SGM8584 Single-Supply, Quad Rail-to-Rail I/O Precision Operational Amplifier PRODUCT DESCRIPTION The SGM8584 is a quad rail-to-rail input and output precision operational amplifier which has low input offset voltage, and bias current. It is guaranteed to operate from 2.5V to 5.5V

More information

SGM8925/7 110kHz, 6.4μA, Rail-to-Rail Output CMOS Operational Amplifiers

SGM8925/7 110kHz, 6.4μA, Rail-to-Rail Output CMOS Operational Amplifiers PRODUCT DESCRIPTION The SGM8925 and SGM8927 are low power, low offset voltage and rail-to-rail output voltage feedback amplifiers. They have a wide output voltage swing, and take the minimum operating

More information

SGM9154 Single Channel, Video Filter Driver for HD (1080p)

SGM9154 Single Channel, Video Filter Driver for HD (1080p) PRODUCT DESCRIPTION The SGM9154 video filter is intended to replace passive LC filters and drivers with an integrated device. The 6th-order channel offers High Definition (HDp) filter. The SGM9154 may

More information

SGM mA, High Voltage Regulators

SGM mA, High Voltage Regulators Preliminary Datasheet SGM2203 GENERAL DESCRIPTION The SGM2203 series is a set of low power high voltage regulators implemented in CMOS technology which can provide 150mA output current. The device allows

More information

SGM Watt Audio Power Amplifier GENERAL DESCRIPTION FEATURES. PIN CONFIGURATIONS (Top View) APPLICATIONS

SGM Watt Audio Power Amplifier GENERAL DESCRIPTION FEATURES. PIN CONFIGURATIONS (Top View) APPLICATIONS . Watt Audio Power Amplifier GENERAL DESCRIPTION The is a.-w, fully integrated, audio power amplifier. It is designed to maximize audio performance in portable applications such as mobile phone. The portable

More information

SGM MHz, 48μA, Rail-to-Rail I/O CMOS Operational Amplifier

SGM MHz, 48μA, Rail-to-Rail I/O CMOS Operational Amplifier PRODUCT DESCRIPTION The is a low cost, single rail-to-rail input and output voltage feedback amplifier. It has a wide input common mode voltage range and output voltage swing, and takes the minimum operating

More information

SGM8140 Low Power, Vibration Sensor and PIR Sensor Analog Front End (AFE)

SGM8140 Low Power, Vibration Sensor and PIR Sensor Analog Front End (AFE) SGM814 PRODUCT DESCRIPTION The SGM814 is a PIR sensor and vibration sensor analog front end which consists of 2 independent building block circuits. One is a dual rail-to-rail input and output operational

More information

SGM Ω, Low Voltage Quad, SPDT Analog Switch

SGM Ω, Low Voltage Quad, SPDT Analog Switch GENERAL DESCRIPTION The SGM3699 is a quad, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch that is designed to operate from a single 1.8V to 4.35V power

More information

SON3130 FEATURES PRODUCT DESCRIPTION PIN CONFIGURATION (TOP VIEW) APPLICATIONS

SON3130 FEATURES PRODUCT DESCRIPTION PIN CONFIGURATION (TOP VIEW) APPLICATIONS PRODUCT DESCRIPTION The SON313 is designed for heart rate output with SON133(heart rate sensor) offering low cost. It has a wide input common mode voltage range and output voltage swing, and takes the

More information

SGM3736 PWM Dimming, 38V Step-Up LED Driver

SGM3736 PWM Dimming, 38V Step-Up LED Driver GENERAL DESCRIPTION The SGM3736 is a versatile constant current LED driver with a high efficiency step-up converter architecture. The low-side power MOSFET is integrated in the device, significantly shrinking

More information

SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch

SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch GENERAL DESCRIPTION The SGM44599 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power

More information

SGM9111 8MHz Rail-to-Rail Composite Video Driver with 6dB Gain

SGM9111 8MHz Rail-to-Rail Composite Video Driver with 6dB Gain SGM9111 8MHz Rail-to-Rail Composite GENERAL DESCRIPTION The SGM9111 is a single rail-to-rail -pole output reconstruction filter with a -3dB bandwidth of 8MHz and 3V/µs slew rate. Operating from single

More information

SGM9119 Triple, 5th-Order, Standard Definition Video Filter Driver

SGM9119 Triple, 5th-Order, Standard Definition Video Filter Driver PRODUCT DESCRIPTION The SGM9119 is a low voltage, triple video amplifier with integrated reconstruction filters and input clamps. Specially suited for standard definition video signals, this device is

More information

IS31AP4066D DUAL 1.3W STEREO AUDIO AMPLIFIER. January 2014 KEY SPECIFICATIONS

IS31AP4066D DUAL 1.3W STEREO AUDIO AMPLIFIER. January 2014 KEY SPECIFICATIONS DUAL 1.3W STEREO AUDIO AMPLIFIER GENERAL DESCRIPTION The IS31AP4066D is a dual bridge-connected audio power amplifier which, when connected to a 5V supply, will deliver 1.3W to an 8Ω load. The IS31AP4066D

More information

SGM9203 Triple, 6th-Order, Video Filter Driver for SD/PS/HD (1080i)/HD (1080p)

SGM9203 Triple, 6th-Order, Video Filter Driver for SD/PS/HD (1080i)/HD (1080p) SGM923 for SD/PS/HD (18i)/HD (18p) PRODUCT DESCRIPTION The SGM923 is a comprehensive filtering solution designed to give designers the flexibility to easily filter and drive various video signals, including

More information

EUA6210 Output Capacitor-less 67mW Stereo Headphone Amplifier

EUA6210 Output Capacitor-less 67mW Stereo Headphone Amplifier Output Capacitor-less 67mW Stereo Headphone Amplifier DESCRIPTION The is an audio power amplifier primarily designed for headphone applications in portable device applications. It is capable of delivering

More information

SGM Channel PWM Dimming Charge Pump White LED Driver

SGM Channel PWM Dimming Charge Pump White LED Driver GENERAL DESCRIPTION The SGM3145 is a high performance white LED driver. It integrates current sources and automatic mode selection charge pump. The part maintains the high efficiency by utilizing a 1 /1.5

More information

SGM ns, Low-Power, 3V/5V, Rail-to-Rail Input Single-Supply Comparator

SGM ns, Low-Power, 3V/5V, Rail-to-Rail Input Single-Supply Comparator 150ns, Low-Power, 3V/5V, Rail-to-Rail GENERAL DESCRIPTION The is a single high-speed comparator optimized for systems powered from a 3V or 5V supply. The device features high-speed response, low-power

More information

Dual 2.6W Stereo Audio Amplifier

Dual 2.6W Stereo Audio Amplifier Dual 2.6W Stereo Audio Amplifier General Description The is a dual bridge-connected audio power amplifier which, when connected to a 5V supply, will deliver 2.6W to a 4Ω load. The features a low-power

More information

SGM8957-1/SGM V, Micro-Power CMOS Zero-Drift Operational Amplifiers

SGM8957-1/SGM V, Micro-Power CMOS Zero-Drift Operational Amplifiers /SGM8957-2 1.8V, Micro-Power CMOS PRODUCT DESCRIPTION The single and dual SGM8957-2 CMOS operational amplifiers provide very low offset voltage and zero-drift over time and temperature. The miniature,

More information

SGM V Step-Up LED Driver

SGM V Step-Up LED Driver GENERAL DESCRIPTION The SGM3725 is a versatile constant current LED driver with a high efficiency step-up converter architecture. Unique technology and high 1.35A current limit allow SGM3725 to drive up

More information

SGM48754 Quad SPST CMOS Analog Switch

SGM48754 Quad SPST CMOS Analog Switch GENERAL DESCRIPTION The is a CMOS analog switch configured as quad SPST. This CMOS device can operate from 2.5V to 5.5V single supplies. Each switch can handle rail-to-rail analog signals. The off-leakage

More information

SGM6132 3A, 28.5V, 1.4MHz Step-Down Converter

SGM6132 3A, 28.5V, 1.4MHz Step-Down Converter GENERAL DESCRIPTION The SGM6132 is a current-mode step-down regulator with an internal power MOSFET. This device achieves 3A continuous output current over a wide input supply range from 4.5V to 28.5V

More information

SGM4684 Chip Scale Packaging, Low-Voltage 0.4Ω, Dual, SPDT Analog Switch

SGM4684 Chip Scale Packaging, Low-Voltage 0.4Ω, Dual, SPDT Analog Switch GENERAL DESCRIPTION The SGM4684 is a dual, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch designed to operate from a single 1.8V to 5.5V power supply.

More information

SGM330A Quad, Wide-Bandwidth SPDT Video Analog Switch

SGM330A Quad, Wide-Bandwidth SPDT Video Analog Switch GENERAL DESCRIPTION The SGM330A is a quad, bidirectional, single-pole/ double-throw (SPDT) CMOS video analog switch (Mux/ DeMux) designed to operate from a single 2.7V to 5.5V power supply. This 2-channel

More information

SGM8701 Micro-Power, CMOS Input, RRIO, 1.4V, Push-Pull Output Comparator

SGM8701 Micro-Power, CMOS Input, RRIO, 1.4V, Push-Pull Output Comparator SGM871 GENERAL DESCRIPTION The SGM871 is an ultra low power comparator with a typical power supply current of 3nA. It has the best-in-class power supply current versus propagation delay performance. The

More information

SGM2576/SGM2576B Power Distribution Switches

SGM2576/SGM2576B Power Distribution Switches /B GENERAL DESCRIPTION The and B are integrated typically 100mΩ power switch for self-powered and bus-powered Universal Series Bus (USB) applications. The and B integrate programmable current limiting

More information

Dual 2.84W Stereo Audio Amplifier Plus Headphone Driver

Dual 2.84W Stereo Audio Amplifier Plus Headphone Driver Dual.84W Stereo Audio Amplifier Plus Headphone Driver Description The SN4088A is a dual bridge-connected audio power amplifier which, when connected to a V supply, will deliver.84w to a 4Ω load. To simplify

More information

SGM mA Buck/Boost Charge Pump LED Driver

SGM mA Buck/Boost Charge Pump LED Driver GENERAL DESCRIPTION The SGM3140 is a current-regulated charge pump ideal for powering high brightness LEDs for camera flash applications. The charge pump can be set to regulate two current levels for Flash

More information

UNISONIC TECHNOLOGIES CO., LTD

UNISONIC TECHNOLOGIES CO., LTD UNISONIC TECHNOLOGIES CO., LTD 2W X 2 CLASS AB AUDIO POWER AMPLIFIER (WITH DC_VOLUME CONTROL) DESCRIPTION DIP-16 UTC PA7493 provides precise DC volume control, and a stereo bridged audio power amplifiers

More information

UNISONIC TECHNOLOGIES CO., LTD PA4838

UNISONIC TECHNOLOGIES CO., LTD PA4838 UNISONIC TECHNOLOGIES CO., LTD PA4838 STEREO W AUDIO POWER AMPLIFIERS WITH DC VOLUME CONTROL AND LECTABLE GAIN DESCRIPTION The UTC PA4838 is a monolithic integrated circuit and designed to provide DC volume

More information

SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch

SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch GENERAL DESCRIPTION The SGM44601 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power

More information

SGM3127 White LED Driver with Low Dropout Current Source

SGM3127 White LED Driver with Low Dropout Current Source GENERAL DESCRIPTION The SGM3127 low-dropout bias supply for white LEDs is a high-performance alternative to the simple ballast resistors used in conventional white LED designs. It is optimized for low

More information

SGM9119 Triple, 5th Order, Standard Definition Video Filter Driver

SGM9119 Triple, 5th Order, Standard Definition Video Filter Driver PRODUCT DESCRIPTION The SGM9119 is a low-voltage, triple video amplifier with integrated reconstruction filter and input clamps. Specially suited for standard definition video signals, this device is ideal

More information

SGM % Efficient Synchronous Step-Up Converter with 1.1A Switch

SGM % Efficient Synchronous Step-Up Converter with 1.1A Switch GERAL DESCRIPTION The SGM0 is a constant frequency, current mode, synchronous step-up switching regulator. It can be used for generating V at 00mA from a.v rail or a Li-Ion battery. High switching frequency

More information

SGM8706 Micro-Power, RRIO, 1.8V, Push-Pull Output Comparator with Integrated Voltage Reference GENERAL DESCRIPTION FEATURES APPLICATIONS

SGM8706 Micro-Power, RRIO, 1.8V, Push-Pull Output Comparator with Integrated Voltage Reference GENERAL DESCRIPTION FEATURES APPLICATIONS Micro-Power, RRIO, 1.V, Push-Pull Output GENERAL DESCRIPTION The is a low power comparator with a typical power supply current of 2.2µA. It features an uncommitted on-chip voltage reference, comparator

More information

SGM89112 Capless 3Vrms Line Driver with 8MHz 5th-Order Video Driver

SGM89112 Capless 3Vrms Line Driver with 8MHz 5th-Order Video Driver GENERAL DESCRIPTION The is a 3Vrms pop/click-free stereo line driver designed to allow the removal of the output DC-blocking capacitors for reduced component count and cost. The also has a single rail-to-rail

More information

DATA SHEET. Filterless, 2.8W, Mono Class-D Audio Power Amplifier

DATA SHEET. Filterless, 2.8W, Mono Class-D Audio Power Amplifier GK2305LD Filterless, 2.8W, Mono Class-D Audio Power Amplifier General Description ---The GK2305LD is a 2.8W high efficiency, filterless Class-D audio amplifier in a DFN or MSOP package. A filterless PWM

More information

SGM Ω Ultra Low ON-Resistance, Dual, SPDT Analog Switch

SGM Ω Ultra Low ON-Resistance, Dual, SPDT Analog Switch GENERAL DESCRIPTION The SGM2267 is a dual single-pole/double-throw (SPDT) analog switch that is designed to operate from a single +1.8V to +4.2V power supply. Targeted applications include battery powered

More information

SGM MHz, Triple, 6dB Video Driver

SGM MHz, Triple, 6dB Video Driver PRODUCT DESCRIPTION The SGM9117 includes triple high-speed video buffers with G = +2 in one package. Every video buffer has -db full signal bandwidth in excess of 2MHz, along with slew rates in excess

More information

SGM mA, Low Power, Low Dropout, RF Linear Regulators

SGM mA, Low Power, Low Dropout, RF Linear Regulators GENERAL DESCRIPTION The SGM236 series low-power, low-dropout, CMOS linear voltage regulators operate from a 1.6V to 5.5V input voltage and deliver up to 3mA output current. They are the perfect choice

More information

SGM2025 Quad, Low Power, Low Dropout, 200mA, RF-Linear Regulators

SGM2025 Quad, Low Power, Low Dropout, 200mA, RF-Linear Regulators GENERAL DESCRIPTION The SGM2025 is a quad, low-power, low-dropout, CMOS linear voltage regulator that operates from 3.3V to 5.5V input and delivers up to 200mA continuous current at each channel. An ultra

More information

3110(A) SGM3110 MicroPower Regulated Charge Pump FEATURES GENERAL DESCRIPTION PIN CONFIGURATION (TOP VIEW) APPLICATIONS TYPICAL APPLICATION

3110(A) SGM3110 MicroPower Regulated Charge Pump FEATURES GENERAL DESCRIPTION PIN CONFIGURATION (TOP VIEW) APPLICATIONS TYPICAL APPLICATION GENERAL DESCRIPTION The SGM30 is a MicroPower switched capacitor voltage converter that delivers a regulated output. No external inductor is required for operation. The SGM30 can deliver up to 00mA to

More information

Mono 1.9W / Stereo 300mW Power Amplifier Low Voltage Operation, Shutdown Function

Mono 1.9W / Stereo 300mW Power Amplifier Low Voltage Operation, Shutdown Function Low Voltage Operation, Shutdown Function FEATURES Operation range:.4v ~ 6.5V Shutdown Current 8uA at 5V Output power, THDN=% BTL, R L =3Ω,.W at 5V BTL, R L =4Ω,.9W at 5V, 0.83W at 3.3V, 500mW at.7v BTL,

More information

SGM6130 3A, 28.5V, 385kHz Step-Down Converter

SGM6130 3A, 28.5V, 385kHz Step-Down Converter GENERAL DESCRIPTION The SGM6130 is a current-mode step-down regulator with an internal power MOSFET. This device achieves 3A continuous output current over a wide input supply range from 4.5 to 28.5 with

More information

SGM9119 Triple, 5th Order, Standard Definition Video Filter Driver

SGM9119 Triple, 5th Order, Standard Definition Video Filter Driver PRODUCT DESCRIPTION The SGM9119 is a low-voltage, triple video amplifier with integrated reconstruction filter and input clamps. Specially suited for standard definition video signals, this device is ideal

More information

SGM % Efficient Synchronous Step-Up Converter with 1.1A Switch

SGM % Efficient Synchronous Step-Up Converter with 1.1A Switch GERAL DESCRIPTION The SGM0 is a constant frequency, current mode, synchronous step-up switching regulator. Its output currents can go as high as 7mA while using a single-cell alkaline, and discharge it

More information

SGM2551A/SGM2551C Precision Adjustable Current Limited Power Distribution Switches

SGM2551A/SGM2551C Precision Adjustable Current Limited Power Distribution Switches / GENERAL DESCRIPTION The SGM2551A and power distribution switches are intended for applications where precision current limiting is required or heavy capacitive loads and short circuits are encountered

More information

SGM2553/SGM2553D Precision Adjustable Current Limited Power Distribution Switches

SGM2553/SGM2553D Precision Adjustable Current Limited Power Distribution Switches /D GENERAL DESCRIPTION The and D power distribution switches are intended for applications where precision current limiting is required or heavy capacitive loads and short circuits are encountered and

More information

SGM6232 2A, 38V, 1.4MHz Step-Down Converter

SGM6232 2A, 38V, 1.4MHz Step-Down Converter GENERAL DESCRIPTION The is a current-mode step-down regulator with an internal power MOSFET. This device achieves 2A continuous output current over a wide input supply range from 4.5V to 38V with excellent

More information

SGM ns, Low-Power, 3V/5V, Rail-to-Rail Input Single-Supply Comparator

SGM ns, Low-Power, 3V/5V, Rail-to-Rail Input Single-Supply Comparator 45ns, Low-Power, 3V/5V, Rail-to-Rail GENERAL DESCRIPTION The is a single high-speed comparator optimized for systems powered from a 3V or 5V supply. The device features high-speed response, low-power consumption,

More information

SGM7222 High Speed USB 2.0 (480Mbps) DPDT Analog Switch

SGM7222 High Speed USB 2.0 (480Mbps) DPDT Analog Switch GENERAL DESCRIPTION The SGM7222 is a high-speed, low-power double-pole/ double-throw (DPDT) analog switch that operates from a single 1.8V to 4.3V power supply. SGM7222 is designed for the switching of

More information

SGM3122 White LED Charge Pump Current Source with PWM Brightness Control

SGM3122 White LED Charge Pump Current Source with PWM Brightness Control GENERAL DESCRIPTION The SGM3122 is a charge pump with PWM brightness control for white LED supplies in LCD display backlight applications. The supply voltage ranges from 2.7V to 5.5V, it is ideally suited

More information

SGM mA Buck/Boost Charge Pump LED Driver

SGM mA Buck/Boost Charge Pump LED Driver GENERAL DESCRIPTION The SGM3140 is a current-regulated charge pump ideal for powering high brightness LEDs for camera flash applications. The charge pump can be set to regulate two current levels for FLASH

More information

SGM8551XN Single-Supply, Single Rail-to-Rail I/O Precision Operational Amplifier

SGM8551XN Single-Supply, Single Rail-to-Rail I/O Precision Operational Amplifier PRODUCT DESCRIPTION The SGM8551XN is a single rail-to-rail input and output precision operational amplifier which has low input offset voltage, and bias current. It is guaranteed to operate from 2.5V to

More information

PT5321 Dual 2.1W Audio Amplifier Plus Stereo Headphone Function & 3D Enhancement

PT5321 Dual 2.1W Audio Amplifier Plus Stereo Headphone Function & 3D Enhancement PT532 GENERAL DESCRIPTION The PT532 is a dual bridge-connected audio power amplifier which, when connected to a 5V supply, will deliver 2.W to a 4Ω load or 2.4W to a 3Ω load with less than.0% THDN. In

More information

SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch

SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch GENERAL DESCRIPTION The SGM44601 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power

More information

UNISONIC TECHNOLOGIES CO., LTD

UNISONIC TECHNOLOGIES CO., LTD UNISONIC TECHNOLOGIES CO., LTD STEREO 2.6W AUDIO POWER AMPLIFIER (WITH DC_VOLUME CONTROL) DESCRIPTION As an audio power amplifier, UTC PA7469 can provides precise DC volume control, and a stereo bridged

More information

CE0030A. Audio Power Amplifier with low power supply INTRODUCTION FEATURES PIN DIAGRAM

CE0030A. Audio Power Amplifier with low power supply INTRODUCTION FEATURES PIN DIAGRAM Audio Power Amplifier with low power supply INTRODUCTION The is a fully differential audio power amplifier designed for portable communication device applications. It is capable of delivering 1 watt of

More information

SGM706 Low-Cost, Microprocessor Supervisory Circuit

SGM706 Low-Cost, Microprocessor Supervisory Circuit GENERAL DESCRIPTION The microprocessor supervisory circuit reduces the complexity and number of components required to monitor power-supply and monitor microprocessor activity. It significantly improves

More information

LM mw Audio Power Amplifier with Shutdown Mode

LM mw Audio Power Amplifier with Shutdown Mode LM4862 675 mw Audio Power Amplifier with Shutdown Mode General Description The LM4862 is a bridge-connected audio power amplifier capable of delivering typically 675 mw of continuous average power to an

More information

SGM9111 8MHz Rail-to-Rail Composite Video Driver with 6dB Gain

SGM9111 8MHz Rail-to-Rail Composite Video Driver with 6dB Gain PRODUCT DESCRIPTION The SGM9111 is single rail-to-rail 5-pole output reconstruction filter with a -3dB bandwidth of 8MHz and a slew rate of 3.8V/µs. Operating from single supplies ranging from 3.V to 5.5V

More information

SGM Ω, 300MHz, Low-Power Full-Speed USB (12Mbps) Switch

SGM Ω, 300MHz, Low-Power Full-Speed USB (12Mbps) Switch GENERAL ESCRIPTION The SGM2258 is a high-performance, dual, single-pole/ double-throw (SPT) CMOS analog switch designed for switching USB 1.1 signals. High bandwidth and low on-resistance make this switch

More information

SGM2021 Low Power, Low Dropout, Linear Regulators

SGM2021 Low Power, Low Dropout, Linear Regulators GENERAL DESCRIPTION The series low-power, low-noise, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input voltage. They are the perfect choice for low voltage, low power applications.

More information

SGM706 Low-Cost, Microprocessor Supervisory Circuit

SGM706 Low-Cost, Microprocessor Supervisory Circuit GENERAL DESCRIPTION The microprocessor supervisory circuit reduces the complexity and number of components required to monitor power supply and monitor microprocessor activity. It significantly improves

More information

1.2W Audio Power Amplifier with Active-low Standby Mode

1.2W Audio Power Amplifier with Active-low Standby Mode 1.2W Audio Power Amplifier with Active-low Standby Mode General Description The SN4991 has been designed for demanding audio applications such as mobile phones and permits the reduction of the number of

More information

UNISONIC TECHNOLOGIES CO., LTD M4670 Preliminary CMOS IC

UNISONIC TECHNOLOGIES CO., LTD M4670 Preliminary CMOS IC UNISONIC TECHNOLOGIES CO., LTD M4670 Preliminary CMOS IC FITERLESS HIGH EFFICIENCY 3W SWITCHING AUDIO AMPLIFIER DESCRIPTION The M4670 is a fully integrated single-supply, high-efficiency Class D switching

More information

SGM42507 DC Motor/Coil Driver

SGM42507 DC Motor/Coil Driver ADVANCED DATASHEET SGM4507 GENERAL DESCRIPTION SGM4507 is a bridge-tie driver designed for actuating motors and coils bi-directionally. It translates logic level input waves to power driving outputs to

More information

LM4858 Mono 1.5 W / Stereo 300mW Power Amplifier

LM4858 Mono 1.5 W / Stereo 300mW Power Amplifier Mono 1.5 W / Stereo 300mW Power Amplifier General Description The LM4858 is an audio power amplifier capable of delivering 1.5W (typ) of continuous average power into a mono 4Ω bridged-tied load (BTL)

More information

AA4003. Pin Assignments. Description. Features. Applications. A Product Line of. Diodes Incorporated 2W STEREO AUDIO POWER AMPLIFIER WITH SHUTDOWN

AA4003. Pin Assignments. Description. Features. Applications. A Product Line of. Diodes Incorporated 2W STEREO AUDIO POWER AMPLIFIER WITH SHUTDOWN 2W STEREO AUDIO POWER AMPLIFIER WITH SHUTDOWN Description Pin Assignments The is a Class AB stereo Audio Power Amplifier which can deliver 2.0W into 4Ω speakers with limitation of THDN less than 1%. The

More information

Constant Voltage and Constant Current Controller. Features

Constant Voltage and Constant Current Controller. Features 09/06/2011 Constant Voltage and Constant Current Controller Rev. P1 General Description Features The is built-in with a high-accuracy 1.2V voltage reference, two op-amps and a low-side current sensing

More information

SGM MHz, Low Voltage SPDT Analog Switch in 6-pin SC70

SGM MHz, Low Voltage SPDT Analog Switch in 6-pin SC70 GENERAL DESCRIPTION The SGM3167 is a single, bidirectional, single-pole/ double-throw (SPDT) CMOS analog switches designed to operate from a single 1.8V to 5.5V supply. It features high-bandwidth (600MHz)

More information

A W CLASS AB BTL AUDIO POWER AMPLIFIER EXTERNAL GAIN CONFIGURATION CAPABILITY

A W CLASS AB BTL AUDIO POWER AMPLIFIER EXTERNAL GAIN CONFIGURATION CAPABILITY DESCRIPTION The is a Class-AB audio power amplifier designed for mobile phones and other portable communication devices. It is capable of delivering 1.28 watts of continuous average power to an 8Ω BTL

More information

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. LM4862 675 mw Audio Power Amplifier with Shutdown Mode General Description

More information

SGM % Efficient Synchronous Step-Up Converter with 1A Switch

SGM % Efficient Synchronous Step-Up Converter with 1A Switch Preliminary Datasheet SGM0 GERAL DESCRIPTION The SGM0 is a constant frequency, current mode, synchronous, step-up switching regulator. Its output currents can go as high as 7mA while using a single-cell

More information

Very Low Distortion, Dual-Channel, High Precision Difference Amplifier AD8274 FUNCTIONAL BLOCK DIAGRAM +V S FEATURES APPLICATIONS GENERAL DESCRIPTION

Very Low Distortion, Dual-Channel, High Precision Difference Amplifier AD8274 FUNCTIONAL BLOCK DIAGRAM +V S FEATURES APPLICATIONS GENERAL DESCRIPTION Very Low Distortion, Dual-Channel, High Precision Difference Amplifier AD8273 FEATURES ±4 V HBM ESD Very low distortion.25% THD + N (2 khz).15% THD + N (1 khz) Drives 6 Ω loads Two gain settings Gain of

More information

SGM3127 White LED Driver with Low Dropout Current Source

SGM3127 White LED Driver with Low Dropout Current Source GENERAL DESCRIPTION The SGM3127 low-dropout bias supply for white LEDs is a high-performance alternative to the simple ballast resistors used in conventional white LED designs. It is optimized for low

More information

LM4811 Dual 105mW Headphone Amplifier with Digital Volume Control and Shutdown Mode

LM4811 Dual 105mW Headphone Amplifier with Digital Volume Control and Shutdown Mode LM4811 Dual 105mW Headphone Amplifier with Digital Volume Control and Shutdown Mode General Description Key Specifications The LM4811 is a dual audio power amplifier capable of delivering 105mW per channel

More information